AWS表格

WELDING PROCEDURE SPECIFICATION (WPS) YES □

PREQUALIFIED QULIFIED BY TESTING

Or PROCEDURE QUALIFICATION RECORDS (PQR) YES □

Identification #

Revision Date By

Authorized by Date Company Name Type—Manual □Semiautomatic □Welding Process(es) Machanized □Automatic □Supporting PQR No. (s)

POSITION

JOINT DESIGN USED Positon of Groove: Fillet:

Type: Vertical Progression: Up □Down □

Single □Double Weld □

Backing: Yes □No □ ELECTRICAL CHARACTERISTICS

Backing Material: Transfer Mode (GMAW) Short-Circuiting □

Root Opening Root Face Dimension Globular □Spray □Groove Angle Radius( J-U) Current: AC □DCEP □ DCEN □ Pulsed □Back Gouging : Yes □No □ Method Power Source: CC □ CV □

Other

BASE METALS Tungsten Electrode (GTAW)

Material Spec. Size:

Type or Grade Type:

Thickness: Groove Fillet

Diameter (Pipe) TECHNIQUE

Stringer or Weave Bead:

FILLER METALS Multi-pass or Single Pass (per side)

AWS Specification Number of Electrodes

AWS Classification Electrode Spacing Longitudinal

Lateral

Angle

SHIELDING Contact Tube to Work Distance

Flux Gas Peening

Composition Interpass Cleaning:

Electrode-Flux( Class) Flow Rate

Gas Cup Size POSTWELD HEAT TREATMENT

Temp.

PREHEAT Time

Preheat Temp., Min.

Interpass Temp., Min Max.

Procedure Qualification Record (PQR) #

Test Results

Appearance Radiographic-ultrasonic examination

Undercut RT report No: Result:

Piping porosity TU report No: Result:

Convexity FILLET WELD TEST RESULTS

Test date Minimum size multiple pass /Maximum size single pass Witnessed by Macroetch Macroetch

1. 3. 1. 3.

2. 2.

All-weld-metal tension test

Other Tests Tensile strength

Yield point/strength

Elongation %

Laboratory test No.

Welder’s name Clock No. Stamp No.

Test conducted by Laboratory

Test No.

Per

We, the undersigned, certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in conformance with the requirements of Clause 4 of AWS D1.1/1.1M, ( )Structural Welding Code—Steel.

Signed

By

Title

Date

WELDER, WELDING OPERATOR, OR TACK WELDER QUALIFICATION TEST RECORD Type of Welder

Name Identification No.

Welding Procedure Specification No. Rev Date

Record Actual Values Qualification

Used in Qualification Range Variables

Process/ Type [Table 4.12, Item (1)]

Electrode (single or multiple) [Table 4.12, Item(7)]

Current / Polarity

Position [Table 4.12, Item (4)]

Weld Progression [Table 4.12, Item (5)]

Backing (YES or NO) [Table 4.12, Item (6)]

Material / Spec.

Base Metal

Thickness: (Plate)

Groove

Fillet

Thickness: (Plate/ tube)

Groove

Fillet

Diameter: (Pipe)

Groove

Fillet

Filler Metal ( Table 4.12)

Spec. No.

Class

F-No. [Table 4.12, Item (2)]

Gas/ Flux Type (Table 4.12)

Other