CD40194BD中文资料
CD4014中文资料
4 1 5 2 6 3 7 4 8 5 C 6 B 7 VSS 8
16 VDD 15 0 14 D 13 3 12 2 11 1 10 9 9 A
Functional Diagram
Applications
• Keyboard Encoding • 10 Line to BCD Encoding • Range Selection
3. For accuracy, voltage is measured differentially to VDD. Limit is 0.050V max.
9 0 PRIORITY SELECT BCD ENCODER D C B A 23 22 21 20
Description
CD40147BMS CMOS encoder features priority encoding of the inputs to ensure that only the highest order data line is encoded. Ten data input lines (0-9) are encoded to four line (8, 4, 2, 1) BCD. The highest priority line is line 9. All four output lines are logic 1 (VSS) when all input lines are logic 0. All inputs and outputs are buffered, and each output can drive one TTL low power Schottky load. The CD40147BMS is functionally similar to the TTL 54/74147 if pin 15 is tied low. The CD40147BMS is supplied in these 16-lead outline packages: Braze Seal DIP Frit Seal DIP Ceramic Flatpack H4T H1E H6W
CD4049中文资料
CD4049中文资料
CD4049功能简介:
CD4049 六反相缓冲器/转换器.,CD4049是六反相缓冲器，具有仅用一电源电压(VCC)进行逻辑电平转换的特征。
用作逻辑电平转换时，输入高电平电压(V IH)超过电源电压V CD。
该器件主要用作COS/MOS到DTL/TTL的转换器，能直接驱动两个DTL/TTL负载。
CD4049可替换CD4009，因为CD4049仅需要一电源电压，可取代CD4009用于反相器、电源驱动器或逻辑电平转换器。
CD4049与CD4009引出端排列一致，16引出端是空脚，与内部电路无连接。
若使用时不要求高的漏电流或电压转换，推荐使用CD4049六反相器。
CD4049引脚图:
CD4049引脚图
CD4049内部结构图:
CD4049 内部图
CD4049电气参数:
CD4049交流特性波形图CD4049典型应用电路:
典型电路。
CD40192BE,CD40193BE,CD40193BPWRE4,CD40193BPWRG4,CD40192BNSRE4,CD40193BNSRE4, 规格书,Datasheet 资料
Data sheet acquired from Harris SemiconductorSCHS106B – Revised July 2003The CD40192B and CD40193B types aresupplied in 16-lead hermetic dual-in-lineceramic packages (F3A suffix), 16-leaddual-in-line plastic packages (E suffix),16-lead small-outline packages (NSR suffix),and 16-lead thin shrink small-outlinepackages (PW and PWR suffixes).Copyright 2003, Texas Instruments IncorporatedPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)CD40192BE ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD40192BEE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg Type CD40192BF ACTIVE CDIP J161TBD A42N/A for Pkg Type CD40192BF3A ACTIVE CDIP J161TBD A42N/A for Pkg Type CD40192BNSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40192BNSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40192BNSRG4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BE ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD40193BEE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg Type CD40193BF3A ACTIVE CDIP J161TBD A42N/A for Pkg Type CD40193BNSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BNSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BNSRG4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BPW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BPWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BPWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BPWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BPWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40193BPWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHScompatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant CD40192BNSR SO NS 162000330.016.48.210.5 2.512.016.0Q1CD40193BNSR SO NS 162000330.016.48.210.5 2.512.016.0Q1CD40193BPWRTSSOPPW162000330.012.46.95.61.68.012.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) CD40192BNSR SO NS162000367.0367.038.0 CD40193BNSR SO NS162000367.0367.038.0CD40193BPWR TSSOP PW162000367.0367.035.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,enhancements,improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B.Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All semiconductor products(also referred to herein as“components”)are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its components to the specifications applicable at the time of sale,in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by applicable law,testing of all parameters of each component is not necessarily performed.TI assumes no liability for applications assistance or the design of Buyers’products.Buyers are responsible for their products and applications using TI components.To minimize the risks associated with Buyers’products and applications,Buyers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any patent right,copyright,mask work right,or other intellectual property right relating to any combination,machine,or process in which TI components or services are rmation published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Buyer acknowledges and agrees that it is solely responsible for compliance with all legal,regulatory and safety-related requirements concerning its products,and any use of TI components in its applications,notwithstanding any applications-related information or support that may be provided by TI.Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures,monitor failures and their consequences,lessen the likelihood of failures that might cause harm and take appropriate remedial actions.Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications.In some cases,TI components may be promoted specifically to facilitate safety-related applications.With such components,TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements.Nonetheless,such components are subject to these terms.No TI components are authorized for use in FDA Class III(or similar life-critical medical equipment)unless authorized officers of the parties have executed a special agreement specifically governing such use.Only those TI components which TI has specifically designated as military grade or“enhanced plastic”are designed and intended for use in military/aerospace applications or environments.Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk,and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI has specifically designated certain components which meet ISO/TS16949requirements,mainly for automotive ponents which have not been so designated are neither designed nor intended for automotive use;and TI will not be responsible for any failure of such components to meet such requirements.Products ApplicationsAudio /audio Automotive and Transportation /automotiveAmplifiers Communications and Telecom /communicationsData Converters Computers and Peripherals /computersDLP®Products Consumer Electronics /consumer-appsDSP Energy and Lighting /energyClocks and Timers /clocks Industrial /industrialInterface Medical /medicalLogic Security /securityPower Mgmt Space,Avionics and Defense /space-avionics-defense Microcontrollers Video and Imaging /videoRFID OMAP Mobile Processors /omap TI E2E Community Wireless Connectivity /wirelessconnectivityMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2012,Texas Instruments Incorporated。
protel_dxp 2004 原件英文对照表要点
protel 元件库中英文对照表（5）CD4553 三位BCD计数器CD4555 双二进制四选一译码器/分离器CD4556 双二进制四选一译码器/分离器CD4558 BCD八段译码器CD4560 "N"BCD加法器CD4561 "9"求补器CD4573 四可编程运算放大器CD4574 四可编程电压比较器CD4575 双可编程运放/比较器CD4583 双施密特触发器CD4584 六施密特触发器CD4585 4位数值比较器CD4599 8位可寻址锁存器CD40110 十进制加/减,计数,锁存,译码驱动STCD40147 10-4线编码器NSC\\MOTCD40160 可预置BCD加计数器NSC\\MOTCD40161 可预置4位二进制加计数器NSC\\MOTCD40162 BCD加法计数器NSC\\MOTCD40163 4位二进制同步计数器NSC\\MOTCD40174 六锁存D型触发器NSC\\TI\\MOTCD40175 四D型触发器NSC\\TI\\MOTCD40181 4位算术逻辑单元/函数发生器CD40182 超前位发生器CD40192 可预置BCD加/减计数器(双时钟) NSC\\TI CD40193 可预置4位二进制加/减计数器NSC\\TICD40194 4位并入/串入-并出/串出移位寄存NSC\\MOT CD40195 4位并入/串入-并出/串出移位寄存NSC\\MOT CD40208 4×4多端口寄存器型号器件名称厂牌备注CD4501 4输入端双与门及2输入端或非门CD4502 可选通三态输出六反相/缓冲器CD4503 六同相三态缓冲器CD4504 六电压转换器CD4506 双二组2输入可扩展或非门CD4508 双4位锁存D型触发器CD4510 可预置BCD码加/减计数器CD4511 BCD锁存,7段译码,驱动器CD4512 八路数据选择器CD4513 BCD锁存,7段译码,驱动器(消隐)CD4514 4位锁存,4线-16线译码器CD4515 4位锁存,4线-16线译码器CD4516 可预置4位二进制加/减计数器CD4517 双64位静态移位寄存器CD4518 双BCD同步加计数器CD4519 四位与或选择器CD4520 双4位二进制同步加计数器CD4521 24级分频器CD4522 可预置BCD同步1/N计数器CD4526 可预置4位二进制同步1/N计数器CD4527 BCD比例乘法器CD4528 双单稳态触发器注：同型号的74系列、74HC系列、74LS系列芯片，逻辑功能上是一样的。
CD40194BE中文资料
The C D40194B t ypes a re s upplied i n 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (NSR suffix), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)CD40194BE ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD40194BEE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD40194BNSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BNSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BNSRG4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TIto Customer on an annual basis.TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant CD40194BNSR SO NS 162000330.016.48.210.5 2.512.016.0Q1CD40194BPWRTSSOPPW162000330.012.47.05.61.68.012.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) CD40194BNSR SO NS162000346.0346.033.0 CD40194BPWR TSSOP PW162000346.0346.029.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandClocks and Timers Digital ControlInterface MedicalLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityRFID TelephonyRF/IF and ZigBee®Solutions Video&ImagingWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2008,Texas Instruments Incorporated。
CD4019中文资料
TL F 5940CD4002M CD4002C Dual 4-Input NOR Gate CD4012M CD4012C Dual 4-Input NAND GateMarch 1988CD4002M CD4002C Dual 4-Input NOR Gate CD4012M CD4012C Dual 4-Input NAND GateGeneral DescriptionThese NOR and NAND gates are monolithic complementa-ry MOS (CMOS)integrated circuits The N-and P-channel enhancement mode transistors provide a symmetrical cir-cuit with output swings essentially equal to the supply volt-age This results in high noise immunity over a wide supply voltage range No DC power other than that caused by leak-age current is consumed during static conditions All inputs are protected against static discharge and latching condi-tionsFeaturesY Wide supply voltage range 3 0V to 15V Y Low power10nW (typ )YHigh noise immunity0 45V DD (typ )ApplicationsY Automotive Y Alarm system Y Data terminals Y Industrial controls Y Instrumentation Y Remote metering YMedical ElectronicsYComputersConnection DiagramsCD4002Dual-In-Line PackageTL F 5940–1Top ViewCD4012Dual-In-Line PackageTL F 5940–2Top ViewOrder Number CD4002or CD4012C 1995National Semiconductor Corporation RRD-B30M105 Printed in U S AAbsolute Maximum Ratings(Note1)If Military Aerospace specified devices are required please contact the National Semiconductor Sales Office Distributors for availability and specifications Voltage at Any Pin V SS b0 3V to V DD a0 3V Operating Temperature RangeCD4002M CD4012M b55 C to a125 C CD4002C CD4012C b40 C to a85 C Storage Temperature Range(T S)b65 C to a150 C Power Dissipation(P D)Dual-In-Line700mW Small Outline500mW Operating Range(V DD)V SS a3 0V to V SS a15V Lead Temperature(T L)(Soldering 10seconds)260 CDC Electrical Characteristics CD4002M CD4012MLimitsSymbol Parameter Conditions b55 C a25 C a125 C UnitsMin Max Min Typ Max Min MaxI DD Quiescent V DD e5 0V0 050 0010 053 0m ADevice Current V DD e10V0 10 0010 16m A P D Quiescent Device V DD e5 0V0 250 0050 2515m W Dissipation Package V DD e10V1 00 011 060m W V OL Output Voltage V DD e5 0V V I e V DD I O e0A0 0500 050 05V Low Level V DD e10V V I e V DD I O e0A0 0500 050 05V V OH Output Voltage V DD e5 0V V I e V SS I O e0A4 954 955 04 95V High Level V DD e10V V I e V SS I O e0A9 959 95109 95V V NL Noise Immunity V DD e5 0V V O e3 6V I O e0A1 51 52 251 4V (All Inputs)V DD e10V V O e7 2V I O e0A3 03 04 52 9V V NH Noise Immunity V DD e5 0V V O e0 95V I O e0A1 41 52 251 5V (All Inputs)V DD e10V V O e2 9V I O e0A2 93 04 53 0V I D N Output Drive Current V DD e5 0V V O e0 4V V I e V DD0 50 401 00 28mAN-Channel(4002)V DD e10V V O e0 5V V I e V DD1 10 92 50 65mA (Note2)I D P Output Drive Current V DD e5 0V V O e2 5V V I e V SS b0 62b0 5b2 0b0 35mAP-Channel(4002)V DD e10V V O e9 5V V I e V SS b0 62b0 5b1 0b0 35mA (Note2)I D N Output Drive Current V DD e5 0V V O e0 4V V I e V DD0 310 250 50 175mAN-Channel(4012)V DD e10V V O e0 5V V I e V DD0 630 50 60 35mA (Note2)I D P Output Drive Current V DD e5 0V V O e2 5V V I e V SS b0 31b0 25b0 5b0 175mAP-Channel(4012)V DD e10V V O e9 5V V I e V SS b0 75b0 6b1 2b0 4mA (Note2)I I Input Current10pANote1 ‘‘Absolute Maximum Ratings’’are those values beyond which the safety of the device cannot be guaranteed Except for‘‘Operating Temperature Range’’they are not meant to imply that the devices should be operated at these limits The table of‘‘Electrical Characteristics’’provides conditions for actual device operationNote2 I D N and I D P are tested one output at a time2DC Electrical Characteristics CD4002C CD4012CLimitsSymbol Parameter Conditions b55 C a25 C a85 C UnitsMin Max Min Typ Max Min MaxI DD Quiescent V DD e5 0V0 50 0050 515m ADevice Current V DD e10V5 00 0055 030m A P D Quiescent Device V DD e5 0V2 50 0252 575m W Dissipation Package V DD e10V500 0550300m W V OL Output Voltage V DD e5 0V V I e V DD I O e0A0 0500 050 05V Low Level V DD e10V V I e V DD I O e0A0 0500 050 05V V OH Output Voltage V DD e5 0V V I e V SS I O e0A4 954 955 04 95V High Level V DD e10V V I e V SS I O e0A9 959 95109 95V V NL Noise Immunity V DD e5 0V V O t3 6V I O e0A1 51 52 251 4V (All Inputs)V DD e10V V O t7 2V I O e0A3 03 04 52 9V V NH Noise Immunity V DD e5 0V V O s0 95V I O e0A1 41 52 251 5V (All Inputs)V DD e10V V O s2 9V I O e0A2 93 04 53 0V I D N Output Drive Current V DD e5 0V V O e0 4V V I e V DD0 350 31 00 24mAN-Channel(4002)V DD e10V V O e0 5V V I e V DD0 720 62 50 48mA (Note2)I D N Output Drive Current V DD e5 0V V O e0 4V V I e V DD0 1450 120 50 095mAN-Channel(4012)V DD e10V V O e0 5V V I e V DD0 30 250 60 2mA (Note2)I D P Output Drive Current V DD e5 0V V O e2 5V V I e V SS b0 35b0 3b2 0b0 24mAP-Channel(4002)V DD e10V V O e9 5V V I e V SS b0 3b0 25b1 0b0 2mA (Note2)I D P Output Drive Current V DD e5 0V V O e2 5V V I e V SS b0 145b0 12b0 5b0 095mAP-Channel(4012)V DD e10V V O e9 5V V I e V SS b0 35b0 3b1 2b0 24mA (Note2)I I Input Current10pANote1 ‘‘Absolute Maximum Ratings’’are those values beyond which the safety of the device cannot be guaranteed Except for‘‘Operating Temperature Range’’they are not meant to imply that the devices should be operated at these limits The table of‘‘Electrical Characteristics’’provides conditions for actual device operationNote2 I D N and I D P are tested one output at a time3AC Electrical Characteristics T A e25 C C L e15pF and input rise and fall times e20ns Typical temperature coefficient for all values of V DD e0 3% CSymbol Parameter Conditions Min Typ Max Units CD4002Mt PHL Propagation Delay Time V DD e5 0V3550ns High to Low Level V DD e10V2540ns t PLH Propagation Delay Time V DD e5 0V3550ns Low to High Level V DD e10V2540ns t THL Transition Time High V DD e5 0V65175ns to Low Level V DD e10V3575ns t TLH Transition Time Low V DD e5 0V65125ns to High Level V DD e10V3570nsC IN Input Capacitance Any Input5 0pFCD4002Ct PHL Propagation Delay Time V DD e5 0V35120ns High to Low Level V DD e10V2565ns T PLH Propagation Delay Time V DD e5 0V3580ns Low to High Level V DD e10V2555ns t THL Transition Time High V DD e5 0V65300ns to Low Level V DD e10V35125ns t TLH Transition Time Low V DD e5 0V65200ns to High Level V DD e10V35115nsC IN Input Capacitance Any Input5 0pFAC Parameters are guaranteed by DC correlated testingAC Electrical Characteristics T A e25 C C L e15pF and input rise and fall times e20ns Typical temperature coefficient for all values of V DD e0 3% CSymbol Parameter Conditions Min Typ Max Units CD4012Mt PHL Propagation Delay Time V DD e5 0V5075ns High to Low Level V DD e10V2540ns t PLH Propagation Delay Time V DD e5 0V5075ns Low to High Level V DD e10V2540ns t THL Transition Time High V DD e5 0V75125ns to Low Level V DD e10V5075ns t TLH Transition Time Low V DD e5 0V75100ns to High Level V DD e10V4060nsC IN Input Capacitance Any Input5 0pFCD4012Ct PHL Propagation Delay Time V DD e5 0V50100ns High to Low Level V DD e10V2550ns T PLH Propagation Delay Time V DD e5 0V50100ns Low to High Level V DD e10V2550ns t THL Transition Time High V DD e5 0V75150ns to Low Level V DD e10V50100ns t TLH Transition Time Low V DD e5 0V75125ns to High Level V DD e10V4075nsC IN Input Capacitance Any Input5 0pFAC Parameters are guaranteed by DC correlated testingNote1 ‘‘Absolute Maximum Ratings’’are those values beyond which the safety of the device cannot be guaranteed Except for‘‘Operating Temperature Range’’they are not meant to imply that the devices should be operated at these limits The table of‘‘Electrical Characteristics’’provides conditions for actual device operation4Physical Dimensions inches(millimeters)Ceramic Dual-In-Line Package(J)Order Number CD4002MJ CD4002CJ CD4012MJ or CD4012CJNS Package Number J14A5C D 4002M C D 4002C D u a l 4-I n p u t N O R G a t e C D 4012M C D 4012C D u a l 4-I n p u t N A N D G a t ePhysical Dimensions inches (millimeters)(Continued)Molded Dual-In-Line Package (N)Order Number CD4002MN CD4002CN CD4012MN or CD4012CNNS Package Number N14ALIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION As used herein 1 Life support devices or systems are devices or 2 A critical component is any component of a life systems which (a)are intended for surgical implant support device or system whose failure to perform can into the body or (b)support or sustain life and whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system or to affect its safety or with instructions for use provided in the labeling can effectivenessbe reasonably expected to result in a significant injury to the userNational Semiconductor National Semiconductor National Semiconductor National Semiconductor CorporationEuropeHong Kong LtdJapan Ltd1111West Bardin RoadFax (a 49)0-180-530858613th Floor Straight Block Tel 81-043-299-2309。
IC集成电路型号大全及40系列芯片功能大全
IC集成电路型号大全及40系列芯片功能大全CD4001 四2输入端或者非门CD4002 双4输入端或者非门CD4006 18位串入/串出移位寄存器CD4007 双互补对加反相器CD4008 4位超前进位全加器CD4009 六反相缓冲/变换器CD4010 六同相缓冲/变换器CD4011 四2输入端与非门CD4012 双4输入端与非门CD4013 双主-从D型触发器CD4014 8位串入/并入-串出移位寄存器CD4015 双4位串入/并出移位寄存器CD4016 四传输门CD4017 十进制计数/分配器CD4018 可预制1/N计数器CD4019 四与或者选择器CD4020 14级串行二进制计数/分频器CD4021 08位串入/并入-串出移位寄存器CD4022 八进制计数/分配器CD4023 三3输入端与非门CD4024 7级二进制串行计数/分频器CD4025 三3输入端或者非门CD4026 十进制计数/7段译码器CD4027 双J-K触发器CD4028 BCD码十进制译码器CD4029 可预置可逆计数器CD4030 四异或者门CD4031 64位串入/串出移位存储器CD4032 三串行加法器CD4033 十进制计数/7段译码器CD4034 8位通用总线寄存器CD4035 4位并入/串入-并出/串出移位寄存CD4038 三串行加法器CD4040 12级二进制串行计数/分频器CD4041 四同相/反相缓冲器CD4042 四锁存D型触发器CD4043 三态R-S锁存触发器("1"触发)CD4044 四三态R-S锁存触发器("0"触发)CD4046 锁相环CD4047 无稳态/单稳态多谐振荡器CD4048 四输入端可扩展多功能门CD4049 六反相缓冲/变换器CD4050 六同相缓冲/变换器CD4051 八选一模拟开关CD4052 双4选1模拟开关CD4053 三组二路模拟开关CD4054 液晶显示驱动器CD4055 BCD-7段译码/液晶驱动器CD4056 液晶显示驱动器CD4059 “N”分频计数器 NSC/TICD4060 14级二进制串行计数/分频器CD4063 四位数字比较器CD4066 四传输门CD4067 16选1模拟开关CD4068 八输入端与非门/与门CD4069 六反相器CD4070 四异或者门CD4071 四2输入端或者门CD4072 双4输入端或者门CD4073 三3输入端与门CD4075 三3输入端或者门CD4076 四D寄存器CD4077 四2输入端异或者非门CD4078 8输入端或者非门/或者门CD4081 四2输入端与门CD4082 双4输入端与门CD4085 双2路2输入端与或者非门CD4086 四2输入端可扩展与或者非门CD4089 二进制比例乘法器CD4093 四2输入端施密特触发器CD4095 三输入端J-K触发器CD4096 三输入端J-K触发器CD4097 双路八选一模拟开关CD4098 双单稳态触发器CD4099 8位可寻址锁存器CD40100 32位左/右移位寄存器CD40101 9位奇偶较验器CD40102 8位可预置同步BCD减法计数器CD40103 8位可预置同步二进制减法计数器CD40104 4位双向移位寄存器CD40105 先入先出FI-FD寄存器CD40106 六施密特触发器CD40107 双2输入端与非缓冲/驱动器CD40108 4字×4位多通道寄存器CD40109 四低-高电平位移器CD40110 十进制加/减,计数,锁存,译码驱动CD40147 10-4线编码器CD40160 可预置BCD加计数器CD40161 可预置4位二进制加计数器CD40162 BCD加法计数器CD40163 4位二进制同步计数器CD40174 六锁存D型触发器CD40175 四D型触发器CD40181 4位算术逻辑单元/函数发生器CD40182 超前位发生器CD40192 可预置BCD加/减计数器(双时钟) CD40193 可预置4位二进制加/减计数器CD40194 4位并入/串入-并出/串出移位寄存CD40195 4位并入/串入-并出/串出移位寄存CD40208 4×4多端口寄存器CD4501 4输入端双与门及2输入端或者非门CD4502 可选通三态输出六反相/缓冲器CD4503 六同相三态缓冲器CD4504 六电压转换器CD4506 双二组2输入可扩展或者非门CD4508 双4位锁存D型触发器CD4510 可预置BCD码加/减计数器CD4511 BCD锁存,7段译码,驱动器CD4512 八路数据选择器CD4513 BCD锁存,7段译码,驱动器(消隐) CD4514 4位锁存,4线-16线译码器CD4515 4位锁存,4线-16线译码器CD4516 可预置4位二进制加/减计数器CD4517 双64位静态移位寄存器CD4518 双BCD同步加计数器CD4519 四位与或者选择器CD4520 双4位二进制同步加计数器CD4521 24级分频器CD4522 可预置BCD同步1/N计数器CD4526 可预置4位二进制同步1/N计数器CD4527 BCD比例乘法器CD4528 双单稳态触发器CD4529 双四路/单八路模拟开关CD4530 双5输入端优势逻辑门CD4531 12位奇偶校验器CD4532 8位优先编码器CD4536 可编程定时器CD4538 精密双单稳CD4539 双四路数据选择器CD4541 可编程序振荡/计时器CD4543 BCD七段锁存译码,驱动器CD4544 BCD七段锁存译码,驱动器CD4547 BCD七段译码/大电流驱动器CD4549 函数近似寄存器CD4551 四2通道模拟开关CD4553 三位BCD计数器CD4555 双二进制四选一译码器/分离器CD4556 双二进制四选一译码器/分离器CD4558 BCD八段译码器CD4560 "N"BCD加法器CD4561 "9"求补器CD4573 四可编程运算放大器CD4574 四可编程电压比较器CD4575 双可编程运放/比较器CD4583 双施密特触发器CD4584 六施密特触发器CD4585 4位数值比较器CD4599 8位可寻址锁存器CD22100 4×4×1交叉点开关0206A 天线开关集成电路03VFG9 发射压控振荡集成电路1021AC 发射压控振荡集成电路1097C 升压集成电路140N 电源取样比较放大集成电路14DN363 伺服操纵集成电路15105 充电操纵集成电路15551 管理卡升压集成电路1710 视频信号处理集成电路1N706 混响延时集成电路20810－F6096 存储集成电路2252B 微处理集成电路2274 延迟集成电路24C01ACEA 存储集成电路24C026 存储集成电路24C04 存储集成电路24C64 码片集成电路24LC16B 存储集成电路24LC65 电可改写编程只读存储集成电路27C1000PC－12 存储集成电路27C2000QC－90 存储集成电路27C20T 存储集成电路27C512 电可改写编程只读存储集成电路2800 红外遥控信号接收集成电路28BV64 码片集成电路28F004 版本集成电路31085 射频电源集成电路32D54 电源、音频信号处理集成电路1732D75 电源、音频信号处理集成电路32D92 电源中频放大集成电路4066B 电子开关切换集成电路4094 移位寄存串入、并出集成电路424260SDJ 存储集成电路4260 动态随机存储集成电路4270351/91B9905 中频放大集成电路4370341/90M9919 中频处理集成电路4464 存储集成电路4558 双运算放大集成电路4580D 双运算放大集成电路47C1638AN－U337 微处理集成电路47C1638AU－353 微处理集成电路47C432GP 微处理集成电路47C433AN－3888 微处理集成电路49/4CR1A 中频放大集成电路5101 天线开关集成电路5G052 发光二极管四位显示驱动集成电路5G24 运算放大集成电路5W01 双运算放大集成电路649/CRIA70612 中频放大集成电路673/3CR2A 多模转换集成电路74122 可重触发单稳态集成电路74HC04 逻辑与非门集成电路74HC04D 六反相集成电路74HC123 单稳态集成电路74HC125 端口功能扩展集成电路74HC14N 六反相集成电路74HC157A 多路转换集成电路74HC165 移相寄存集成电路1874HC245 总线收发集成电路74HC32 或者门四2输入集成电路74HC374八D 触发集成电路74HC573D 存储集成电路74HCT157 多路转换双输入集成电路74HCT4046A 压控振荡集成电路74HCT4538D 单稳态集成电路74HCT4538N 触发脉冲集成电路74HCT86D 异或者门四2输入集成电路74HCU04 与非门集成电路74LS125 端口功能扩展集成电路74LS373 锁存集成电路74LS393 计数双四位二进制集成电路74LS74双D 触发集成电路78014DFP 系统操纵处理集成电路811N 伴音阻容偏置集成电路83D33 压控振荡集成电路85712 场扫描信号校正处理集成电路85713 行扫描信号校正集成电路87C52 微处理集成电路87CK38N－3584 微处理集成电路87CK38N－3627 微处理集成电路89C52 系统操纵处理集成电路89C55 系统操纵处理集成电路93C66 电可改写编程只读存储集成电路93LC56 电可改写编程存储集成电路9821K03 系统操纵集成电路A1642P 背景歌声消除集成电路A701 红外遥控信号接收集成电路A7950 场频识别集成电路19A8772AN 色差信号延迟处理集成电路A9109 功率放大集成电路AAB 电源集成电路ACA650 色度信号解调集成电路ACFP2 色度、亮度信号分离集成电路ACP2371 多伴音、多语言改善集成电路ACVP2205 色度、亮度信号分离集成电路AD1853 立体声数/模转换集成电路AD1858 音频解调集成电路AD722 视频编码集成电路ADC2300E 音频数/模转换集成电路ADC2300J 音频数/模转换集成电路ADC2310E 音频数/模转换集成电路ADV7172 视频编码集成电路ADV7175A 视频编码集成电路AE31201 频率显示集成电路AJ7080 射频调制集成电路AK4321－VF－E1 音频数/模转换集成电路AN1319 双高速电压比较集成电路AN1358S 双运算放大集成电路AN1393 双运算放大集成电路AN1431T 稳压电源集成电路AN1452 音频前置放大集成电路AN1458S 双运算放大集成电路AN206 伴音中频及前置放大集成电路AN222 自动频率操纵集成电路AN236 副载波信号处理集成电路AN239Q 图像、伴音中频放大集成电路AN247P 图像中频放大、AGC操纵集成电路AN253P 调频/调幅中频放大集成电路20AN262 音频前置放大集成电路AN2661NK 视频信号处理集成电路AN2663K 视频信号处理集成电路AN272 音频功率放大集成电路AN2751FAP 视频信号处理集成电路AN281 色度解码集成电路AN2870FC 多功能操纵集成电路AN295 行、场扫描信号处理集成电路AN301 伺服操纵集成电路AN305 视频自动增益操纵集成电路AN306 色度自动相位操纵集成电路AN318 直流伺服操纵集成电路AN320 频率操纵、调谐显示驱动集成电路AN3215K 视频信号处理集成电路AN3215S 视频信号处理集成电路AN3224K 磁头信号记录放大集成电路AN3248NK 亮度信号记录、重放处理集成电路AN331 视频信号处理集成电路AN3311K 磁头信号放大集成电路AN3313 磁头信号放大集成电路AN3321S 录像重放信号处理集成电路AN3331K 磁头信号处理集成电路AN3337NSB 磁头信号放大集成电路AN3380K 磁头信号处理集成电路AN3386NK 磁头信号处理集成电路AN3495K 色度、亮度信号降噪集成电路AN355 伴音中频放大、检波集成电路AN3581S 视频驱动集成电路AN366 调频/调幅中频放大集成电路AN3791 移位操纵集成电路21AN3792 磁鼓伺服操纵接口集成电路AN3795 主轴伺服操纵接口集成电路AN3814K 电机驱动集成电路AN4265 音频功率放大集成电路AN4558 运算放大集成电路AN5010 电子选台集成电路AN5011 电子选台集成电路AN5015K 电子选台集成电路AN5020 红外遥控信号接收集成电路AN5025S 红外遥控信号接收集成电路AN5026K 红外遥控信号接收集成电路AN5031 电调谐操纵集成电路AN5034 调谐操纵集成电路AN5036 调谐操纵集成电路AN5043 调谐操纵集成电路AN5071 频段转换集成电路AN5095K 电视信号处理集成电路AN5110 图像中频放大集成电路AN5130 图像中频、视频检波放大集成电路AN5138NK 图像、伴音中频放大集成电路AN5156K 电视信号处理集成电路AN5177NK 图像、伴音中频放大集成电路AN5179K 图像、伴音中频放大集成电路AN5183K 中频信号处理集成电路AN5195K 中频、色度、扫描信号处理集成电路AN5215 伴音信号处理集成电路AN5520 伴音中频放大及鉴频集成电路AN5222 伴音中频放大集成电路AN5250 伴音中频放大、鉴频及功率放大集成电路AN5262 音频前置放大集成电路22AN5265 音频功率放大集成电路AN5270 音频功率放大集成电路AN5273 双声道音频功率放大集成电路AN5274 双声道音频功率放大集成电路AN5275 中置、3D放大集成电路AN5285K 双声道前置放大集成电路AN5295NK 音频信号切换集成电路AN5312 视频、色度信号处理集成电路AN5313NK 视频、色度信号处理集成电路AN5342 图像水平轮廓校正集成电路AN5342FB 水平清晰度操纵集成电路AN5344FBP 色度信号处理集成电路AN5348K 人工智能信号处理集成电路AN5385K 色差信号放大集成电路AN5410 行、场扫描信号处理集成电路AN5421 同步检测集成电路AN5422 行、场扫描信号处理集成电路AN5512 场扫描输出集成电路AN5515 场扫描输出集成电路AN5521 场扫描输出集成电路AN5532 场扫描输出集成电路AN5534 场扫描输出集成电路AN5551 枕形校正集成电路AN5560 场频识别集成电路AN5600K 中频、亮度、色度及扫描信号处理集成电路AN5601K 视频、色度、同步信号处理集成电路AN5607K 视频、色度、行场扫描信号处理集成电路AN5615 视频信号处理集成电路AN5620X 色度信号处理集成电路AN5621 场扫描输出集成电路23AN5625 色度信号处理集成电路AN5633K 色度信号处理集成电路AN5635 色度解码集成电路AN5635NS 色度解码集成电路AN5637 色度解码、亮度延迟集成电路AN5650 同步信号分离集成电路AN5682K 基色电子开关切换集成电路AN5693K 视频、色度、行场扫描信号处理集成电路AN5712 图像中频放大、AGC操纵集成电路AN5722 图像中频放大、检波集成电路AN5732 伴音中频放大、鉴频集成电路AN5743 音频功率放大集成电路AN5750 行自动频率操纵及振荡集成电路AN5757S 行扫描电源电压操纵集成电路AN5762 场扫描振荡、输出集成电路AN5764 光栅水平位置操纵集成电路AN5765 电源稳压操纵集成电路AN5767 同步信号处理集成电路AN5768 光栅倾斜校正操纵集成电路AN5769 行、场会聚操纵集成电路AN5790N 行扫描信号处理集成电路AN5791 同步脉冲相位与脉宽调整集成电路AN5803 双声道立体声解调集成电路AN5836 双声道前置放大集成电路AN5858K 视频信号操纵集成电路AN5862 视频信号操纵集成电路AN5862S－E1 视频信号开关操纵集成电路AN5870K 模拟信号切换集成电路AN5891K 音频信号处理集成电路AN614 行枕形校正集成电路24AN6210 双声道前置放大集成电路AN6306S 亮度信号处理集成电路AN6308 模拟电子开关集成电路AN6327 视频重放信号处理集成电路AN6341N 伺服操纵集成电路AN6342N 基准分频集成电路AN6344 伺服操纵集成电路AN6345 分频集成电路AN6346N 磁鼓伺服操纵集成电路AN6350 磁鼓伺服操纵集成电路AN6357N 主轴接口集成电路AN6361N 色度信号处理集成电路AN6367NK 色度信号处理集成电路AN6371S 自动相位操纵集成电路AN6387 电机伺服操纵集成电路AN6550 卡拉OK音频放大集成电路AN6554 四运算放大集成电路AN6561 双运算放大集成电路AN6562SG 双运算放大集成电路AN6609N 电机驱动集成电路AN6612 电机稳速操纵集成电路AN6650 电机速度操纵集成电路AN6651 电机速度操纵集成电路AN6652 电机稳速操纵集成电路AN6875 发光二极管五位显示驱动集成电路AN6877 发光二极管七位显示驱动集成电路AN6884 发光二极管五位显示驱动集成电路AN6886 发光二极管五位显示驱动集成电路AN6888 发光二极管显示驱动集成电路AN6914 双电压比较集成电路25AN7085N5 单片录、放音集成电路AN7105 双声道音频功率放大集成电路AN7106K 双声道音频功率放大集成电路AN7108 单片立体声放音集成电路AN710S 单片放音集成电路AN7110E 音频功率放大集成电路AN7114 音频功率放大集成电路AN7116 音频功率放大集成电路AN7118 双声道音频功率放大集成电路AN7118S 双声道音频功率放大集成电路AN7120 音频功率放大集成电路AN7124 双声道音频功率放大集成电路AN7145 双声道音频功率放大集成电路AN7148 双声道音频功率放大集成电路AN7158N 音频功率放大7.5W×2集成电路AN7161N 音频功率放大集成电路AN7164 双声道音频功率放大集成电路AN7171NK 音频功率放大集成电路AN7205 调频/调谐及高频放大集成电路AN7220 调频/调幅中频放大集成电路AN7222 调频/调幅中频放大集成电路AN7223 调频/调幅中频放大集成电路AN7226 调频/调幅中频放大集成电路AN7256 调频/调谐及中频放大集成电路AN7311 双声道前置放大集成电路AN7312 双声道前置放大集成电路AN7315 双声道前置放大集成电路AN7315S 双声道前置放大集成电路AN7320 音频前置放大集成电路AN7396K 双声道前置放大集成电路26AN7397K 双声道前置放大集成电路AN7410 调频立体声多路解码集成电路AN7414 调频立体声解码集成电路AN7420N 调频立体声解码集成电路AN7470 调频立体声解码集成电路AN7805 三端电源稳压＋5V/1A集成电路AN7806 三端电源稳压＋6V/1A集成电路AN7807 三端电源稳压＋7V/1A集成电路AN7808 三端电源稳压＋8V/1A集成电路AN7809 电源稳压＋9V/1A集成电路AN7810 三端电源稳压＋10V/1A集成电路AN7812 三端电源稳压＋12V/1A集成电路AN7815 三端电源稳压＋15V/1A集成电路AN7818 三端电源稳压＋18V/1A集成电路AN7820 三端电源稳压＋20V/1A集成电路AN7824 三端电源稳压＋24V/1A集成电路AN78L05 三端电源稳压＋5V/0.1A集成电路AN78L06 三端电源稳压＋6V/0.1A集成电路AN78L08 三端电源稳压＋8V/0.1A集成电路AN78L09 三端电源稳压＋9V/0.1A集成电路AN78L10 三端电源稳压＋10V/0.1A集成电路AN78L12 三端电源稳压＋12V/0.1A集成电路AN78L15 三端电源稳压＋15V/0.1A集成电路AN78L18 三端电源稳压＋18V/0.1A集成电路AN78L20 三端电源稳压＋20V/0.1A集成电路AN78L24 三端电源稳压＋24V/0.1A集成电路AN78M05 三端电源稳压＋5V/0.5A集成电路AN78M06 三端电源稳压＋6V/0.5A集成电路AN78M08 三端电源稳压＋8V/0.5A集成电路AN78M09 三端电源稳压＋9V/0.5A集成电路27AN78M10 三端电源稳压＋10V/0.5A集成电路AN78M12 三端电源稳压＋12V/0.5A集成电路AN78M15 三端固定式稳压＋15V/0.5A集成电路AN78M18 三端电源稳压＋18V/0.5A集成电路AN78M20 三端电源稳压＋20V/0.5A集成电路AN78M24 三端电源稳压＋24V/0.5A集成电路AN7905 三端电源稳压－5V/1A集成电路AN7906 三端电源稳压－6V/1A集成电路AN7908T 三端电源稳压－8V/1A集成电路AN7909T 三端电源稳压－9V/1A集成电路AN7910T 三端电源稳压－10V/1A集成电路AN7912 三端电源稳压－12V/1A集成电路AN7915 三端电源稳压－15V/1A集成电路AN7918 三端电源稳压－18V/1A集成电路AN7920 三端电源稳压－20V/1A集成电路AN7924 三端电源稳压－24V/1A集成电路AN79L05 三端电源稳压－5V/0.1A集成电路AN79L06 三端电源稳压－6V/0.1A集成电路AN79L08 三端电源稳压－8V/0.1A集成电路AN79L09 三端电源稳压－9V/0.1A集成电路AN79L10 三端电源稳压－10V/0.1A集成电路AN79L12 三端电源稳压－12V/0.1A集成电路AN79L15 三端电源稳压－15V/0.1A集成电路AN79L18 三端电源稳压－18V/0.1A集成电路AN79L20 三端电源稳压－20V/0.1A集成电路AN79L24 三端电源稳压－24V/0.1A集成电路AN79M05 三端电源稳压－5V/0.5A集成电路AN79M06 三端电源稳压－6V/0.5A集成电路AN79M08 三端电源稳压－8V/0.5A集成电路AN79M09 三端电源稳压－9V/0.5A集成电路28AN79M10 三端电源稳压－10V/0.5A集成电路AN79M12 三端电源稳压－12V/0.5A集成电路AN79M15 三端电源稳压－15V/0.5A集成电路AN79M18 三端电源稳压－18V/0.5A集成电路AN79M20 三端电源稳压－20V/0.5A集成电路AN79M24 三端电源稳压－24V/0.5A集成电路AN8028 自激式开关电源操纵集成电路AN8270K 主轴电机操纵集成电路AN8280 电机驱动集成电路AN8281S 电机驱动集成电路AN8290S 主轴电机驱动集成电路AN8355S 条形码扫描接收集成电路AN8370S 光电伺服操纵集成电路AN8373S 射频伺服处理集成电路AN8375S 伺服处理集成电路AN8389S－E1 电机驱动集成电路AN8480NSB 主轴电机驱动集成电路AN8481SB－E1 主轴电机驱动集成电路AN8482SB 主轴电机驱动集成电路AN8623FBQ 主轴伺服处理集成电路AN8788FB 电机驱动集成电路AN8802CE1V 伺服处理集成电路AN8813NSBS 主轴电机驱动集成电路AN8819NFB 伺服驱动、直流交换集成电路AN8824FBQ 前置放大集成电路AN8825NFHQ－V 聚焦、循迹误差处理集成电路AN8831SC 视频预视放集成电路AN8832SB－E1 射频放大、伺服处理集成电路AN8837SB－E1 伺服处理集成电路AN89C2051－24PC 微处理集成电路29APU2400U 音频信号处理集成电路APU2470 音频信号处理集成电路AS4C14405－60JC 动态随机存储1M×4集成电路AS4C256K16ED－60JC 存储集成电路ASD0204－015 图文操纵集成电路ASD0204GF－022－3BA显示操纵集成电路AT24C08 存储集成电路AT24C08A 存储集成电路AT24C256－10CI 码片集成电路AT27C010 电可改写编程只读存储集成电路AT27C020 存储集成电路ATMEL834 存储集成电路AVM－1 视频信号处理厚膜集成电路AVM－2 音频信号处理厚膜集成电路AVSIBCP08 倍压整流切换集成电路B0011A 存储集成电路B1218 电子快门操纵集成电路BA033T 三端电源稳压＋3.3V集成电路BA10324 四运算放大集成电路BA10393N 双运算放大集成电路BA1102F 杜比降噪处理集成电路BA1106F 杜比降噪处理集成电路BA12ST 电源稳压集成电路BA1310 调频立体声解码集成电路BA1332L 调频立体声解码集成电路BA1350 调频立体声解码集成电路BA1351 调频立体声解码集成电路BA1356 调频立体声解码集成电路BA1360 调频立体声解码集成电路BA15218N 双运算放大集成电路30BA225 可触发双单稳态振荡集成电路BA302 音频前置放大集成电路BA311 音频前置放大集成电路BA313 音频前置放大集成电路BA3283 单片放音集成电路BA328F 双声道前置放大集成电路BA329 双声道前置放大集成电路BA3304F 录放音前置均衡放大集成电路BA3306 音频、前置放大集成电路BA3312N 话筒信号前置放大集成电路BA3313L 自动音量操纵集成电路BA3314 话筒信号前置放大集成电路BA335 自动选曲集成电路BA336 自动选曲集成电路BA340 音频前置放大集成电路BA3402F 双声道前置放大集成电路BA3404F 自返转放音集成电路BA343 双声道前置放大集成电路BA3503F 双声道前置放大集成电路BA3506 单片放音集成电路BA3513FS 单片放音集成电路BA3516 单片放音集成电路BA3706 自动选曲集成电路BA3707 录音带曲间检测集成电路BA3812L 五频段音调补偿集成电路BA3818F 电压比较运放集成电路BA3822LS 双声道五频段显示均衡集成电路BA3828 电子选台预置集成电路BA3880 音频处理集成电路31BA401 调频中频放大集成电路BA402 调频中频放大集成电路BA4110 调频中频放大集成电路BA4234L 调频中频放大集成电路BA4402 调频调谐收音集成电路BA4403 调频高频放大、混频、本振集成电路BA4560 双运算放大集成电路BA5096 数字混响集成电路BA5102A 音频功率放大集成电路BA514 音频功率放大集成电路BA516 音频功率放大集成电路BA5208AF 音频功率放大集成电路BA532 音频功率放大集成电路BA534 音频功率放大集成电路BA5406 双声道音频功率放大集成电路BA5412 音频功率放大集成电路BA547 音频功率放大1.5W集成电路BA5912AFP－YE2 电机驱动、倾斜、加载集成电路BA5981FP－E2 聚焦、循迹驱动集成电路BA5983FB 四通道伺服驱动集成电路BA5983FM－E2 电机驱动集成电路BA6104 发光二极管五位显示驱动集成电路BA6107A 电机伺服操纵集成电路BA6109 加载电机驱动集成电路BA6125 发光二极管五位显示驱动集成电路BA6137 发光二极管五位显示驱动集成电路BA6191 音频操纵集成电路BA6196FP 伺服驱动集成电路BA6208 电机驱动集成电路BA6208D 电机驱动集成电路32BA6209 电机驱动集成电路BA6209N 双向驱动电机集成电路BA6218 加载电机驱动集成电路BA6219 电机驱动集成电路BA6219B 电机驱动集成电路BA6227 电机稳速操纵集成电路BA6238 电机驱动集成电路BA6239 电机双向驱动集成电路BA6239A 电机双向驱动集成电路BA6246M 加载、转盘电机驱动集成电路BA6248 电机驱动集成电路BA6286 电机驱动集成电路BA6287 电机驱动集成电路BA6290 电机驱动集成电路BA6295AFP－E2 加载、倾斜驱动集成电路BA6296FP 电机速度操纵集成电路BA6297AFP 伺服驱动集成电路BA6302A 电机伺服操纵集成电路BA6305 操纵放大集成电路BA6305F 操纵放大集成电路BA6308 电子开关切换集成电路BA6321 电机伺服操纵集成电路BA6392 伺服驱动集成电路BA6395 主轴电机驱动集成电路BA6396FP 伺服驱动集成电路BA6411 电机驱动集成电路BA6435S 主轴电机驱动集成电路BA6459P1 电机驱动集成电路BA6570FP－E2 聚焦、循迹驱动集成电路33BA6664FM 三相主电机驱动集成电路BA6791FP 四通道伺服驱动集成电路BA6796FP 电机驱动集成电路BA6810S 音频显示驱动集成电路BA6844AFP－E2 三相主电机驱动集成电路BA6849FP 主轴电机驱动集成电路BA689 发光二极管十二位显示驱动集成电路BA6893KE2 直流变换驱动集成电路BA6956AN 加载电机驱动集成电路BA6993 双运算放大集成电路BA7001 音频切换集成电路BA7004 测试信号发生集成电路BA7005AL 射频调制集成电路BA7007 信号检测集成电路BA7021 视频信号选择集成电路BA7024 视频信号测试集成电路BA7025L 信号检测集成电路BA7042 振荡集成电路BA7047 调频检波集成电路BA7048N 包络信号检测集成电路BA7106LS 检测信号操纵集成电路BA7180FS 磁头信号放大集成电路BA7212S 磁头信号放大集成电路BA7253S 磁头信号放大集成电路BA7254S 四磁头信号放大集成电路BA7258AS 亮度信号处理集成电路BA7264S 视频信号处理集成电路BA7274S 磁头信号放大集成电路BA7357S 中频放大集成电路BA7604N 电子开关切换集成电路34BA7606F 色差信号切换集成电路BA7655 色度信号处理集成电路BA7665FS－E2 视频输出放大集成电路BA7725FS 混响立体声放大集成电路BA7725S 信号压缩及扩展处理集成电路BA7743FS 磁头信号放大集成电路BA7751ALS 音频信号录放处理集成电路BA7752LS 音频信号处理集成电路BA7755 磁头开关集成电路BA7755AF－E2 磁头开关集成电路BA7765AS 音频信号处理集成电路BA7766SA 音频信号处理集成电路BA7767AS 音频信号处理集成电路BA7797F 音频信号处理集成电路BA8420 特技操纵处理集成电路BAL6309 场同步信号发生集成电路BH3866AS 音频、色度信号前置放大集成电路BH4001 微处理集成电路BH7331P 音频功率放大集成电路BH7770KS 音频信号处理集成电路BL3207 亮度延时集成电路BL3208B 音频延迟混响集成电路BL5132 中频放大集成电路BL54573 电子调频波段转换集成电路BL5612 视频放大、色差矩阵集成电路BM5060 微处理集成电路BM5061 字符发生集成电路BM5069 微处理集成电路BN5115 图像中频放大集成电路BOC31F 单片微处理集成电路35BP5020 视频电源转换集成电路BT852 视频编码集成电路BT864 视频编码集成电路BT866PQFP 微处理集成电路BU12102 时序信号发生解码集成电路BU2092F 扩展集成电路BU2185F 同步信号处理集成电路BU2285FV 时钟信号发生集成电路BU2820 伺服操纵集成电路BU2841FS 视频、蓝背景信号发生集成电路BU2872AK 操作系统操纵、屏显驱动集成电路BU3762AF 红外遥控信号发射集成电路BU4053B 电子开关切换集成电路BU5814F 红外遥控信号发射集成电路BU5994F 红外遥控信号发射集成电路BU6198F 屏幕显示集成电路BU9252F 音频延时集成电路BU9252S 数/模转换集成电路BU9253FS 话筒音频混响集成电路BX1303 音频功率放大集成电路BX1409 红外遥控信号接收集成电路BX7506 主轴电机电源操纵集成电路C1363CA 红外遥控电子选台集成电路C1490HA 红外遥控信号接收集成电路C187 分配、十进制计数集成电路C301 译码BCD－10段集成电路C68639Y 微处理集成电路C75P036 微处理集成电路CA0002 调幅模拟声解调集成电路CA2004 音频功率放大集成电路36CA2006 音频功率放大集成电路CA270AW 视频检波放大集成电路CA3075 调频中频放大集成电路CA3089 调频中频放大集成电路CA3120E 视频信号处理集成电路CA3140 运算放大集成电路CA810 音频功率放大集成电路CA920 行扫描信号处理集成电路CAS126 天线开关集成电路CAT24C16 电可改写编程只读存储集成电路CAT35C104HP 存储集成电路CC4000 或者非门双3输入集成电路CC4008 计数4位二进制集成电路CC40107 与非双2输入缓冲、驱动集成电路CC40174 六D触发集成电路CC40194 移位寄存集成电路CC4025 或者非门3输入集成电路CC4026 译码、驱动、十进制计数集成电路CC4027 上升沿J－K触发集成电路。
4049芯片
CD4049 CD4050中文资料时间：2009-07-18 21:01:20 来源：资料室作者：编号:6209 更新日期20120824 003537 功能：CD4049 六反相缓冲器/转换器FNX838电子-技术资料-电子元件-电路图-技术应用网站-基本知识-原理-维修-作用-参数-电子元器件符号-各种图纸CD4050 六同相缓冲器/转换器FNX838电子-技术资料-电子元件-电路图-技术应用网站-基本知识-原理-维修-作用-参数-电子元器件符号-各种图纸CD4049是六反相缓冲器，具有仅用一电源电压(VCC)进行逻辑电平转换的特征。
用作逻辑电平转换时，输入高电平电压(V IH)超过电源电压V CD。
该器件主要用作COS/MOS到DTL/TTL的转换器，能直接驱动两个DTL/TTL负载。
CD4049可替换CD4009，因为CD4049仅需要一电源电压，可取代CD4009用于反相器、电源驱动器或逻辑电平转换器。
CD4049与CD4009引出端排列一致，16引出端是空脚，与内部电路无连接。
若使用时不要求高的漏电流或电压转换，推荐使用CD4049六反相器。
FNX838电子-技术资料-电子元件-电路图-技术应用网站-基本知识-原理-维修-作用-参数-电子元器件符号-各种图纸FNX838电子-技术资料-电子元件-电路图-技术应用网站-基本知识-原理-维修-作用-参数-电子元器件符号-各种图纸CD4050是非反相六缓冲器，具有仅用一电源电压(VCC)进行逻辑电平转换的特征。
用作逻辑电平转换时，输入高电平电压(VIH)超过电源电压VCC。
该器件主要用作COS/MOS到DTL/TTL的转换器，能直接驱动两个DTL/TTL负载。
CD4049可替换CD4010，因为CD4050仅需要一电源电压，可取代CD4050用于反相器、电源驱动器或逻辑电平转换器。
CD4050与CD4010引出端排列一致，16引出端是空脚，与内部电路无连接。
CD4044中文资料
October 1987Revised January 1999CD4043BC • CD4044BC Quad 3-STATE NOR R/S Latches • Quad 3-STATE NAND R/S Latches © 1999 Fairchild Semiconductor Corporation DS005967.prf CD4043BC • CD4044BCQuad 3-STATE NOR R/S Latches •Quad 3-STATE NAND R/S LatchesGeneral DescriptionThe CD4043BC are quad cross-couple 3-STATE CMOSNOR latches, and the CD4044BC are quad cross-couple 3-STATE CMOS NAND latches. Each latch has a separate Qoutput and individual SET and RESET inputs. There is acommon 3-ST ATE ENABLE input for all four latches. Alogic “1” on the ENABLE input connects the latch states tothe Q outputs. A logic “0” on the ENABLE input discon-nects the latch states from the Q outputs resulting in anopen circuit condition on the Q output. The 3-ST ATE fea-ture allows common bussing of the outputs.Featuress Wide supply voltage range: 3V to 15Vs Low power:100 nW (typ.)s High noise immunity:0.45 V DD (typ.)s Separate SET and RESET inputs for each latchs NOR and NAND configurations3-STATE output with common output enableApplications•Multiple bus storage•Strobed register•Four bits of independent storage with output enable•General digital logicOrdering Code:Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.Connection DiagramsPin Assignments for DIP, SOIC and SOPCD4043BCTop ViewPin Assignments for DIP and SOICCD4044BCTop ViewOrder Number Package Number Package DescriptionCD4043BCM M16A16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow BodyCD4043BCN N16E16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” WideCD4044BCM M16A16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow BodyCD4044BCSJ M16D16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WideCD4044BCN N16E16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 2C D 4043B C • C D 4044B CBlock DiagramsCD4043BCCD4044BCTruth TablesCD4043BCCD4044BC OC = 3-ST ATE NC = No change X = Don’t care∆ = Dominated by S = 1 input ∆∆ = Dominated by R = 0 inputS R E Q X X 0OC 001NC 10110110111∆S R E Q X X 0OC 111NC 0111101001∆∆CD4043BC • CD4044BCAbsolute Maximum Ratings (Note 1)(Note 2)Recommended Operating Conditions (Note 2)Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of “Recom-mended Operating Conditions” and “Electrical Characteristics” provide con-ditions for actual device operation.Note 2: V SS = 0V unless otherwise specified.DC Electrical Characteristics (Note 2)Note 3: I OH and I OL are tested one output at a time.Supply Voltage (V DD )−0.5V to +18V Input Voltage (V IN )−0.5V to V DD +0.5V Storage Temperature Range (T S )−65°C to +150°CPower Dissipation (P D )Dual-In-Line 700 mW Small Outline 500 mW Lead Temperature (T L )(Soldering, 10 seconds)260°C Supply Voltage (V DD ) 3.0V to 15V Input Voltage (V IN )0 to V DD VOperating T emperature Range (T A )CD4043BC, CD4044BC−40°C to +85°CSymbol ParameterConditions−40°C +25°C +85°C Units MinMax MinTyp Max MinMax I DDQuiescent V DD = 5V , V IN = V DD or V SS 200.0120150µA Device CurrentV DD = 10V , V IN = V DD or V SS 400.0140300µA V DD = 15V , V IN = V DD or V SS 800.0280600µA V OLLOW Level |I O | ≤ 1 µA, V IL = 0V , V IH = V DD Output VoltageV DD = 5.0V 0.0500.050.05V V DD = 10V 0.0500.050.05V V DD = 15V0.0500.050.05V V OHHIGH Level |I O | ≤ 1 µA, V IL = 0V , V IH = V DD Output VoltageV DD = 5.0V 4.95 4.95 5.0 4.95V V DD = 10V 9.959.95109.95V V DD = 15V14.9514.951514.95V V ILLOW Level |I O | ≤ 1 µAInput VoltageV DD = 5.0V , V O = 0.5V or 4.5V 1.5 2.25 1.5 1.5V V DD = 10V , V O = 1.0V or 9.0V 3.0 4.5 3.0 3.0V V DD = 15V , V O = 1.5V or 13.5V4.06.754.0 4.0V V IHHIGH Level |I O | ≤ 1 µAInput VoltageV DD = 5.0V , V O = 0.5V or 4.5V 3.5 3.5 3.5V V DD = 5.0V , V O = 1.0V or 9.0V 7.07.07.0V V DD = 15V , V O = 1.5V or 13.5V111111V I OLLOW Level V IL = 0V , V IH = V DD Output Current V DD = 5.0V , V O = 0.4V 0.520.440.880.36mA (Note 3)V DD = 10V , V O = 0.5V 1.3 1.1 2.20.9mA V DD = 15V , V O = 1.5V 3.6 3.0 6.0 2.4mA I OHHIGH Level V IL = 0V , V IH = V DD Output Current V DD = 5.0V , V O = 4.6V −0.52−0.44−0.32−0.36mA (Note 3)V DD = 10V , V O = 9.5V −1.3−1.1−0.8−0.9mA V DD = 15V , V O = 13.5V −3.6−3.0−2.4−2.4mAI INInput CurrentV DD = 15V , V IN = 0V −0.3−0.3−1.0µA V DD = 15V , V IN = 15V0.30.31.0µA 4C D 4043B C • C D 4044B CAC Electrical Characteristics (Note 4)T A = 25°C, C L = 50 pF , R L = 200k, input t r = t f = 20 ns, unless otherwise notedNote 4: AC Parameters are guaranteed by DC correlated testing.Timing WaveformsCD4043BCD4044BEnable TimingSymbol ParameterConditions Min Typ Max Units t PLH , t PHLPropagation Delay S or R to QV DD = 5.0V 175350ns V DD = 10V 75175ns V DD = 15V60120ns t PZH , t PHZPropagation Delay Enable to Q (HIGH)V DD = 5.0V 115230ns V DD = 10V 55110ns V DD = 15V4080ns t PZL , t PLZPropagation Delay Enable to Q (LOW)V DD = 5.0V 100200ns V DD = 10V 50100ns V DD = 15V4080ns t THL , t TLHTransition TimeV DD = 5.0V 100200ns V DD = 10V 50100ns V DD = 15V4080ns t WOMinimum SET or RESET Pulse WidthV DD = 5.0V 80160ns V DD = 10V 4080ns V DD = 15V2040ns C INInput Capacitance5.07.5pFCD4043BC • CD4044BCPhysical Dimensions inches (millimeters) unless otherwise noted16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow BodyPackage Number M16A16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WidePackage Number M16DF a irch ild d o e s n o t a ssu m e a n y re spo n sib ility fo r u se o f a n y circu itry de scrib e d , n o circu it pa ten t lice nse s a re im p lie d a nd F a irch ild re se rv e s the rig h t a t a n y tim e w ith ou t n o tice to cha n g e sa id circu itry an d sp e cifica tio n s.C D 4043B C • C D 4044B C Q u a d 3-S T A T E N O R R /S L a t c h e s • Q u a d 3-S T A T E N A N D R /S L a t c h e sLIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:1.Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to the user.2. A critical component in any component of a life support device or system whose failure to perform can be rea-sonably expected to cause the failure of the life support device or system, or to affect its safety or Physical Dimensions inches (millimeters) unless otherwise noted (Continued)16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” WidePackage Number N16E。
4000系列电路名称和功能
4000系列标准数字电路的名称和功能在电压较高的场合,4000系列是74HC系列无法代替的. 常用4000系列标准数字电路的名称CD4000 双3输入端或非门+单非门CD4001 四2输入端或非门CD4002 双4输入端或非门CD4006 18位串入/串出移位寄存器CD4007 双互补对加反相器CD4008 4位超前进位全加器CD4009 六反相缓冲/变换器CD4010 六同相缓冲/变换器CD4011 四2输入端与非门CD4012 双4输入端与非门CD4013 双主-从D型触发器CD4014 8位串入/并入-串出移位寄存器CD4015 双4位串入/并出移位寄存器CD4016 四传输门CD4017 十进制计数/分配器CD4018 可预制1/N计数器CD4019 四与或选择器CD4020 14级串行二进制计数/分频器CD4021 08位串入/并入-串出移位寄存器CD4022 八进制计数/分配器CD4023 三3输入端与非门CD4024 7级二进制串行计数/分频器CD4025 三3输入端或非门CD4026 十进制计数/7段译码器CD4027 双J-K触发器CD4028 BCD码十进制译码器CD4029 可预置可逆计数器CD4030 四异或门CD4031 64位串入/串出移位存储器CD4032 三串行加法器CD4033 十进制计数/7段译码器CD4034 8位通用总线寄存器CD4035 4位并入/串入-并出/串出移位寄存CD4038 三串行加法器CD4040 12级二进制串行计数/分频器CD4041 四同相/反相缓冲器CD4042 四锁存D型触发器CD4043 三态R-S锁存触发器("1"触发) CD4044 四三态R-S锁存触发器("0"触发) CD4046 锁相环CD4047 无稳态/单稳态多谐振荡器CD4048 四输入端可扩展多功能门CD4049 六反相缓冲/变换器CD4050 六同相缓冲/变换器CD4051 八选一模拟开关CD4052 双4选1模拟开关CD4053 三组二路模拟开关CD4054 液晶显示驱动器CD4055 BCD-7段译码/液晶驱动器CD4056 液晶显示驱动器CD4059 “N”分频计数器 NSC/TI CD4060 14级二进制串行计数/分频器CD4063 四位数字比较器CD4066 四传输门CD4067 16选1模拟开关CD4068 八输入端与非门/与门CD4069 六反相器CD4070 四异或门CD4071 四2输入端或门CD4072 双4输入端或门CD4073 三3输入端与门CD4075 三3输入端或门CD4076 四D寄存器CD4077 四2输入端异或非门CD4078 8输入端或非门/或门CD4081 四2输入端与门CD4082 双4输入端与门CD4085 双2路2输入端与或非门CD4086 四2输入端可扩展与或非门CD4089 二进制比例乘法器CD4093 四2输入端施密特触发器CD4095 三输入端J-K触发器CD4096 三输入端J-K触发器CD4097 双路八选一模拟开关CD4098 双单稳态触发器CD4099 8位可寻址锁存器CD40100 32位左/右移位寄存器CD40101 9位奇偶较验器CD40102 8位可预置同步BCD减法计数器CD40103 8位可预置同步二进制减法计数器CD40104 4位双向移位寄存器CD40105 先入先出FI-FD寄存器CD40106 六施密特触发器CD40107 双2输入端与非缓冲/驱动器CD40108 4字×4位多通道寄存器CD40109 四低-高电平位移器CD40110 十进制加/减,计数,锁存,译码驱动CD40147 10-4线编码器CD40160 可预置BCD加计数器CD40161 可预置4位二进制加计数器CD40162 BCD加法计数器CD40163 4位二进制同步计数器CD40174 六锁存D型触发器CD40175 四D型触发器CD40181 4位算术逻辑单元/函数发生器CD40182 超前位发生器CD40192 可预置BCD加/减计数器(双时钟) CD40193 可预置4位二进制加/减计数器CD40194 4位并入/串入-并出/串出移位寄存CD40195 4位并入/串入-并出/串出移位寄存CD40208 4×4多端口寄存器CD4501 4输入端双与门及2输入端或非门CD4502 可选通三态输出六反相/缓冲器CD4503 六同相三态缓冲器CD4504 六电压转换器CD4506 双二组2输入可扩展或非门CD4508 双4位锁存D型触发器CD4510 可预置BCD码加/减计数器CD4511 BCD锁存,7段译码,驱动器CD4512 八路数据选择器CD4513 BCD锁存,7段译码,驱动器(消隐) CD4514 4位锁存,4线-16线译码器CD4515 4位锁存,4线-16线译码器CD4516 可预置4位二进制加/减计数器CD4517 双64位静态移位寄存器CD4518 双BCD同步加计数器CD4519 四位与或选择器CD4520 双4位二进制同步加计数器CD4521 24级分频器CD4522 可预置BCD同步1/N计数器CD4526 可预置4位二进制同步1/N计数器CD4527 BCD比例乘法器CD4528 双单稳态触发器CD4529 双四路/单八路模拟开关CD4530 双5输入端优势逻辑门CD4531 12位奇偶校验器CD4532 8位优先编码器CD4536 可编程定时器CD4538 精密双单稳CD4539 双四路数据选择器CD4541 可编程序振荡/计时器CD4543 BCD七段锁存译码,驱动器CD4544 BCD七段锁存译码,驱动器CD4547 BCD七段译码/大电流驱动器CD4549 函数近似寄存器CD4551 四2通道模拟开关CD4553 三位BCD计数器CD4555 双二进制四选一译码器/分离器CD4556 双二进制四选一译码器/分离器CD4558 BCD八段译码器CD4560 "N"BCD加法器CD4561 "9"求补器CD4573 四可编程运算放大器CD4574 四可编程电压比较器CD4575 双可编程运放/比较器CD4583 双施密特触发器CD4584 六施密特触发器CD4585 4位数值比较器CD4599 8位可寻址锁存器CD22100 4×4×1交叉点开关。
CD4049 手册
TL F 5971CD4049UBM CD4049UBC Hex Inverting Buffer CD4050BM CD4050BC Hex Non-Inverting BufferMarch 1988CD4049UBM CD4049UBC Hex Inverting Buffer CD4050BM CD4050BC Hex Non-Inverting BufferGeneral DescriptionThese hex buffers are monolithic complementary MOS (CMOS)integrated circuits constructed with N-and P-chan-nel enhancement mode transistors These devices feature logic level conversion using only one supply voltage (V DD ) The input signal high level (V IH )can exceed the V DD supply voltage when these devices are used for logic level conver-sions These devices are intended for use as hex buffers CMOS to DTL TTL converters or as CMOS current drivers and at V DD e 5 0V they can drive directly two DTL TTL loads over the full operating temperature rangeFeaturesY Wide supply voltage range 3 0V to 15V YDirect drive to 2TTL loads at 5 0V over full tempera-ture rangeY High source and sink current capabilityYSpecial input protection permits input voltages greater than V DDApplicationsY CMOS hex inverter bufferY CMOS to DTL TTL hex converterY CMOS current ‘‘sink’’or ‘‘source’’driver YCMOS high-to-low logic level converterConnection DiagramsCD4049UBM CD4049UBC Dual-In-Line PackageTL F 5971–1Top ViewOrder Number CD4049UB or CD4049BCD4050BM CD4050BC Dual-In-Line PackageTL F 5971–2Top ViewOrder Number CD4050UB or CD4050BC 1995National Semiconductor Corporation RRD-B30M105 Printed in U S AAbsolute Maximum Ratings(Notes1 2) If Military Aerospace specified devices are required please contact the National Semiconductor Sales Office Distributors for availability and specifications Supply Voltage(V DD)b0 5V to a18V Input Voltage(V IN)b0 5V to a18V Voltage at Any Output Pin(V OUT)b0 5V to V DD a0 5V Storage Temperature Range(T S)b65 C to a150 C Power Dissipation(P D)Dual-In-Line700mW Small Outline500mW Lead Temperature(T L)(Soldering 10seconds)260 C Recommended Operating Conditions(Note2)Supply Voltage(V DD)3V to15V Input Voltage(V IN)0V to15V Voltage at Any Output Pin(V OUT)0to V DD Operating Temperature Range(T A)CD4049UBM CD4050BM b55 C to a125 C CD4049UBC CD4050BC b40 C to a85 CDC Electrical Characteristics CD4049M CD4050BM(Note2)Symbol Parameter Conditionsb55 C a25 C a125 CUnits Min Max Min Typ Max Min MaxI DD Quiescent Device Current V DD e5V1 00 011 030m AV DD e10V2 00 012 060m AV DD e15V4 00 034 0120m A V OL Low Level Output Voltage V IH e V DD V IL e0Vl I O l k1m AV DD e5V0 0500 050 05VV DD e10V0 0500 050 05VV DD e15V0 0500 050 05V V OH High Level Output Voltage V IH e V DD V IL e0Vl I O l k1m AV DD e5V4 954 9554 95VV DD e10V9 959 95109 95VV DD e15V14 9514 951514 95V V IL Low Level Input Voltage l I O l k1m A(CD4050BM Only)V DD e5V V O e0 5V1 52 251 51 5VV DD e10V V O e1V3 04 53 03 0VV DD e15V V O e1 5V4 06 754 04 0V V IL Low Level Input Voltage l I O l k1m A(CD4049UBM Only)V DD e5V V O e4 5V1 01 51 01 0VV DD e10V V O e9V2 02 52 02 0VV DD e15V V O e13 5V3 03 53 03 0V V IH High Level Input Voltage l I O l k1m A(CD4050BM Only)V DD e5V V O e4 5V3 53 52 753 5VV DD e10V V O e9V7 07 05 57 0VV DD e15V V O e13 5V11 011 08 2511 0V V IH High Level Input Voltage l I O l k1m A(CD4049UBM Only)V DD e5V V O e0 5V4 04 03 54 0VV DD e10V V O e1V8 08 07 58 0VV DD e15V V O e1 5V12 012 011 512 0V I OL Low Level Output Current V IH e V DD V IL e0V(Note3)V DD e5V V O e0 4V5 64 653 2mAV DD e10V V O e0 5V129 8126 8mAV DD e15V V O e1 5V35294020mA Note1 ‘‘Absolute Maximum Ratings’’are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits The table of‘‘Recommended Operating Conditions’’and‘‘Electrical Characteristics’’provides conditions for actual device operationNote2 V SS e0V unless otherwise specifiedNote3 These are peak output current capabilities Continuous output current is rated at12mA maximum The output current should not be allowed to exceed this value for extended periods of time I OL and I OH are tested one output at a time2DC Electrical Characteristics CD4049M CD4050BM(Note2)(Continued)Symbol Parameter Conditionsb55 C a25 C a125 CUnits Min Max Min Typ Max Min MaxI OH High Level Output Current V IH e V DD V IL e0V(Note3)V DD e5V V O e4 6V b1 3b1 1b1 6b0 72mAV DD e10V V O e9 5V b2 6b2 2b3 6b1 5mAV DD e15V V O e13 5V b8 0b7 2b12b5 0mAI IN Input Current V DD e15V V IN e0V b0 1b10b5b0 1b1 0m AV DD e15V V IN e15V0 110b50 11 0m A Note1 ‘‘Absolute Maximum Ratings’’are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits The table of‘‘Recommended Operating Conditions’’and‘‘Electrical Characteristics’’provides conditions for actual device operationNote2 V SS e0V unless otherwise specifiedNote3 These are peak output current capabilities Continuous output current is rated at12mA maximum The output current should not be allowed to exceed this value for extended periods of time I OL and I OH are tested one output at a timeDC Electrical Characteristics CD4049UBC CD4050BC(Note2)Symbol Parameter Conditionsb40 C a25 C a85 CUnits Min Max Min Typ Max Min MaxI DD Quiescent Device Current V DD e5V40 034 030m AV DD e10V80 058 060m AV DD e15V160 0716 0120m A V OL Low Level Output Voltage V IH e V DD V IL e0Vl I O l k1m AV DD e5V0 0500 050 05VV DD e10V0 0500 050 05VV DD e15V0 0500 050 05V V OH High Level Output Voltage V IH e V DD V IL e0Vl I O l k1m AV DD e5V4 954 9554 95VV DD e10V9 959 95109 95VV DD e15V14 9514 951514 95V V IL Low Level Input Voltage l I O l k1m A(CD4050BC Only)V DD e5V V O e0 5V1 52 251 51 5VV DD e10V V O e1V3 04 53 03 0VV DD e15V V O e1 5V4 06 754 04 0V V IL Low Level Input Voltage l I O l k1m A(CD4049UBC Only)V DD e5V V O e4 5V1 01 51 01 0VV DD e10V V O e9V2 02 52 02 0VV DD e15V V O e13 5V3 03 53 03 0V V IH High Level Input Voltage l I O l k1m A(CD4050BC Only)V DD e5V V O e4 5V3 53 52 753 5VV DD e10V V O e9V7 07 05 57 0VV DD e15V V O e13 5V11 011 08 2511 0V V IH High Level Input Voltage l I O l k1m A(CD4049UBC Only)V DD e5V V O e0 5V4 04 03 54 0VV DD e10V V O e1V8 08 07 58 0VV DD e15V V O e1 5V12 012 011 512 0V Note1 ‘‘Absolute Maximum Ratings’’are those values beyond which the safety of the device cannot be guaranteed they are not meant to imply that the devices should be operated at these limits The table of‘‘Recommended Operating Conditions’’and‘‘Electrical Characteristics’’provides conditions for actual device operationNote2 V SS e0V unless otherwise specifiedNote3 These are peak output current capabilities Continuous output current is rated at12mA maximum The output current should not be allowed to exceed this value for extended periods of time I OL and I OH are tested one output at a time3DC Electrical Characteristics CD4049UBC CD4050BC(Note2)(Continued)Symbol Parameter Conditionsb40 C a25 C a85 CUnits Min Max Min Typ Max Min MaxI OL Low Level Output Current V IH e V DD V IL e0V(Note3)V DD e5V V O e0 4V4 64 053 2mAV DD e10V V O e0 5V9 88 5126 8mAV DD e15V V O e1 5V29254020mAI OH High Level Output Current V IH e V DD V IL e0V(Note3)V DD e5V V O e4 6V b1 0b0 9b1 6b0 72mAV DD e10V V O e9 5V b2 1b1 9b3 6b1 5mAV DD e15V V O e13 5V b7 1b6 2b12b5mAI IN Input Current V DD e15V V IN e0V b0 3b0 3b10b5b1 0m AV DD e15V V IN e15V0 30 310b51 0m A AC Electrical Characteristics CD4049UBM CD4049UBCT A e25 C C L e50pF R L e200k t r e t f e20ns unless otherwise specifiedSymbol Parameter Conditions Min Typ Max Unitst PHL Propagation Delay Time V DD e5V3065ns High-to-Low Level V DD e10V2040nsV DD e15V1530nst PLH Propagation Delay Time V DD e5V4585ns Low-to-High Level V DD e10V2545nsV DD e15V2035nst THL Transition Time V DD e5V3060ns High-to-Low Level V DD e10V2040nsV DD e15V1530nst TLH Transition Time V DD e5V60120ns Low-to-High Level V DD e10V3055nsV DD e15V2545nsC IN Input Capacitance Any Input1522 5pFAC Parameters are guaranteed by DC correlated testingAC Electrical Characteristics CD4050BM CD4050BCT A e25 C C L e50pF R L e200k t r e t f e20ns unless otherwise specifiedSymbol Parameter Conditions Min Typ Max Unitst PHL Propagation Delay Time V DD e5V60110ns High-to-Low Level V DD e10V2555nsV DD e15V2030nst PLH Propagation Delay Time V DD e5V60120ns Low-to-High Level V DD e10V3055nsV DD e15V2545nst THL Transition Time V DD e5V3060ns High-to-Low Level V DD e10V2040nsV DD e15V1530nst TLH Transition Time V DD e5V60120ns Low-to-High Level V DD e10V3055nsV DD e15V2545nsC IN Input Capacitance Any Input57 5pFAC Parameters are guaranteed by DC correlated testing4Schematic DiagramsCD4049UBM CD4049UBC1of6Identical UnitsTL F 5971–3CD4050BM CD4050BC1of6Identical UnitsTL F 5971–4 Switching Time WaveformsTL F 5971–5Typical ApplicationsCMOS to TTL or CMOS at a Lower V DDTL F 5971–6Note V DD1t V DD2Note In the case of the CD4049UBM CD4049UBCthe output drive capability increases with increasinginput voltage E g If V DD1e10V the CD4049UBMCD4049UBC could drive4TTL loads5C D 4049U B M C D 4049U B C H e x I n v e r t i n g B u f f e r C D 4050B M C D 4050B C H e x N o n -I n v e r t i n g B u f f e rPhysical Dimensions inches (millimeters)Ceramic Dual-In-Line Package (J)Order Number CD4049UBMJ CD4049UBCJ CD4049BMJ or CD4049BCJNS Package Number J16AMolded Dual-In-Line Package (N)Order Number CD4050BMN CD4050BCN CD4050BMN or CD4050BCNNS Package Number N16ELIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION As used herein 1 Life support devices or systems are devices or 2 A critical component is any component of a life systems which (a)are intended for surgical implant support device or system whose failure to perform can into the body or (b)support or sustain life and whose be reasonably expected to cause the failure of the life failure to perform when properly used in accordance support device or system or to affect its safety or with instructions for use provided in the labeling can effectivenessbe reasonably expected to result in a significant injury to the userNational Semiconductor National Semiconductor National Semiconductor National Semiconductor CorporationEuropeHong Kong LtdJapan Ltd1111West Bardin RoadFax (a 49)0-180-530858613th Floor Straight Block Tel 81-043-299-2309。
CD4044BDRG4中文资料
Data sheet acquired from Harris Semiconductor SCHS041D − Revised October 2003The CD4043B and CD4044B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (D, DR, DT, DW, DWR, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandInterface Digital ControlLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityLow Power TelephonyWirelessVideo&ImagingWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)CD4043BD ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDG4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDRG4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDT ACTIVE SOIC D16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDTE4ACTIVE SOIC D16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDTG4ACTIVE SOIC D16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDW ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDWE4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDWG4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDWR ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDWRE4ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BDWRG4ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BE ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD4043BEE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg Type CD4043BF3A ACTIVE CDIP J161TBD A42SNPB N/A for Pkg Type CD4043BF3AS2534OBSOLETE CDIP J16TBD Call TI Call TI CD4043BM OBSOLETE SOIC D16TBD Call TI Call TICD4043BNSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BNSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BNSRG4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BPW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BPWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BPWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)CD4043BPWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BPWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4043BPWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BD ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDG4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDRG4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDT ACTIVE SOIC D16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDTE4ACTIVE SOIC D16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDTG4ACTIVE SOIC D16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDW ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDWE4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDWG4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDWR ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDWRE4ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BDWRG4ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BE ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD4044BEE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD4044BF ACTIVE CDIP J161TBD A42SNPB N/A for Pkg Type CD4044BF3A ACTIVE CDIP J161TBD A42SNPB N/A for Pkg Type CD4044BF3AS2534OBSOLETE CDIP J16TBD Call TI Call TI CD4044BM OBSOLETE SOIC D16TBD Call TI Call TICD4044BNSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BNSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BNSRG4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BPW ACTIVE TSSOP PW1690Green(RoHS&CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)no Sb/Br)CD4044BPWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BPWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BPWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BPWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD4044BPWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant CD4043BDR SOIC D 162500330.016.4 6.510.3 2.18.016.0Q1CD4043BDWR SOIC DW 162000330.016.410.7510.7 2.712.016.0Q1CD4043BNSR SO NS 162000330.016.48.210.5 2.512.016.0Q1CD4043BPWR TSSOP PW 162000330.012.47.0 5.6 1.68.012.0Q1CD4044BDR SOIC D 162500330.016.4 6.510.3 2.18.016.0Q1CD4044BDWR SOIC DW 162000330.016.410.7510.7 2.712.016.0Q1CD4044BNSR SO NS 162000330.016.48.210.5 2.512.016.0Q1CD4044BPWRTSSOPPW162000330.012.47.05.61.68.012.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) CD4043BDR SOIC D162500333.2345.928.6 CD4043BDWR SOIC DW162000346.0346.033.0 CD4043BNSR SO NS162000346.0346.033.0 CD4043BPWR TSSOP PW162000346.0346.029.0 CD4044BDR SOIC D162500333.2345.928.6 CD4044BDWR SOIC DW162000346.0346.033.0 CD4044BNSR SO NS162000346.0346.033.0 CD4044BPWR TSSOP PW162000346.0346.029.0。
常用CD系列系列IC功能大全
常用CD系列系列IC功能大全常用集成电路功用（含CD；74系列）2007/04/22 14:2520106 前置放大器258N 分离式双电源双运放4N25 光电耦合晶体管输出4N25MC 光电耦合晶体管输出4N26 光电耦合晶体管输出4N27 光电耦合晶体管输出4N28 光电耦合晶体管输出4N29 光电耦合达林顿输出4N30 光电耦合达林顿输出4N31 光电耦合达林顿输出4N32 光电耦合达林顿输出4N33 光电耦合达林顿输出4N33MC 光电耦合达林顿输出4N35 光电耦合达林顿输出4N36 光电耦合晶体管输出4N37 光电耦合晶体管输出4N38 光电耦合晶体管输出4N39 光耦可控硅输出6N135 高速光耦晶体管输出6N136 高速光耦晶体管输出6N137 高速光耦晶体管输出6N138 光电耦合达林顿输出6N139 光电耦合达林顿输出74F00 高速四2输入与非门74F02 高速四2输入或非门74F04 高速六反相器74F08 高速四2输入与门74F10 高速三3输入与门74F139 高速双2－4线译码/驱动器74F14 高速六反相斯密特触发74F151 高速双2－4线译码/驱动器74F153 高速双4选1数据选择器74F157 高速双4选1数据选择器74F161 高速6D型触发器74F174 高速6D型触发器74F175 高速4D型触发器74F244 高速八总线3态缓冲器74F245 高速八总线收发器74F32 高速四2输入或门74F373 高速8D锁存器74F38 高速四2输入或门74F74 高速双D型触发器74F86 高速四2输入异或门CA3140 单BIMOS运行CA3240 单BIMOS运行CD4001 4二输入或非门CD4002 双4输入或非门CD4006 18位静态移位寄存器CD4007 双互补对加反相器CD4009 六缓冲器/转换－倒相CD4010 六缓冲器/转换－正相CD40103 同步可预置减法器CD40106 六斯密特触发器CD40107 双2输入与非缓冲/驱动CD4011 四2输入与非门CD40110 计数/译码/锁存/驱动CD4012 双4输入与非门CD4013 置/复位双D型触发器CD4014 8位静态同步移位寄存CD4015 双4位静态移位寄存器CD4016 四双向模拟数字开关CD4017 10译码输出十进制计数器CD40174 6D触发器CD40175 4D触发器CD4018 可预置1/N计数器CD4019 四与或选择门CD40192 BCD可预置可逆计数器CD40193 二进制可预置可逆计数器CD40194 4位双相移位寄存器CD4020 14位二进制计数器CD4021 8位静态移位寄存器CD4022 8译码输出8进制计数器CD4023 三3输入与非门CD4024 7位二进制脉冲计数器CD4025 三3输入与非门CD4026 十进制/7段译码/驱动CD4027 置位/复位主从触发器CD4028 BCD十进制译码器CD4029 4位可预置可逆计数器CD4030 四异或门CD4031 64位静态移位寄存器CD4032 三串行加法器CD4033 十进制计数器/7段显示CD4034 8位静态移位寄存器CD4035 4位并入/并出移位寄存器CD4038 3位串行加法器CD4040 12位二进制计数器CD4041 四原码/补码缓冲器CD4042 四时钟D型锁存器CD4043 四或非R/S锁存器CD4044 四与非R/S锁存器CD4046 锁相环CD4047 单非稳态多谐振荡器CD4048 可扩充八输入门CD4049 六反相缓冲/转换器CD4050 六正相缓冲/转换器CD4051 单8通道多路转换/分配CD4052 双4通道多路转换/分配CD4053 三2通道多路转换/分配CD4056 7段液晶显示译码/驱动CD4060 二进制计数/分频/振荡CD4063 四位数值比较器CD4066 四双相模拟开管CD4067 16选1模拟开关CD4068 8输入端与非/与门CD4069 六反相器CD4070 四异或门CD4071 四2输入或门CD4072 双四输入或门CD4073 三3输入与门CD4075 三3输入与门CD4076 4位D型寄存器CD4077 四异或非门CD4078 八输入或/或非门CD4081 四输入与门CD4082 双4输入与门CD4085 双2组2输入与或非门CD4086 可扩展2输入与或非门CD4093 四与非斯密特触发器CD4094 8位移位/贮存总线寄存CD4096 3输入J－K触发器CD4098 双单稳态触发器CD4099 8位可寻址锁存器CD4502 可选通六反相缓冲器CD4503 六同相缓冲器CD4504 六电平转换器CD4508 双4位锁存器CD4510 BCD可预置可逆计数器CD4511 BCD7段锁存/译码/驱动CD4512 8通道数据选择器CD4513 BCD7段锁存/译码/驱动CD4514 4－16线译码器CD4515 4－16线译码器CD4518 双BCD加法计数器CD4520 双二进制加法计数器CD4521 24位分频器CD4522 可预置BCD1/N计数CD4526 可预置二进制1/N计数CD4527 BCD系数乘发器CD4528 双单稳态触发器CD4531 12位奇偶校验电路CD4532 8位优先编码器CD4538 双精密单稳态触发器CD4539 双四路输据选择器CD4541 可编程振荡/计时器CD4543 7段锁存/译码/驱动CD4553 3位BCD计数器CD4555 双4选1译码器CD4556 双4选1译码器CD4557 1-64位可变长度寄存器CD4558 BCD-7段译码器CD4560 BCD码加法器CD4561 BCD转换成9的补码输出CD4566 工业定时基准发生器CD4569 双4位可编程1/NBCD CD4583 双斯密特触发器CD4584 4斯密特触发器CD4585 4位数值比较器CD4599 8位总线相容寻址锁存器DS12887 非易失实时时钟芯片H11A2 光电耦合晶体管输出H11D1 光电耦合高压晶体管输出H11G2 光电耦合电阻达林顿输出ICL7106 3位ADC/驱动LCDICL7107 3位半ADC/驱动LEDICL7109 4位半ADC/驱动LEDICL7129 4位半ADC/LCD驱动ICL7135 ADC/LCD驱动BCD输出ICL7136 3位半CMOSADC/LCD驱动ICL7218 CMOS低功耗运算放大器ICL7650 整零运放斩波ICL7652 整零运放斩波ICL7660 CMOS直流-直流转换器ICL8038 函数信号发生器ICL8049 反对数放大器L3845 中继接口电路LF347N 宽带JFET输入四运放LF351N 宽带JFET输入运放LF353N JFET输入宽带运放LF355N JFET输入运放LF357N JFET宽带非全裣运放LF398N 采样/保持电路LF412N 低偏差飘移输入运放LM148J 通用四运放LM1875T 无线电控制/接收器LM224J 四运放(工业级)LM24J 四运放(军用级)LM2901N 四电压比较器LM2904N 四运放LM301AN 通用运算放大器LM308N 单比较器LM311P 单比较器LM317K 可调三端稳压器/3A LM317L 可调三端稳压器/100mA LM317T 可调三端稳压器/1.5ALM318 高速宽带运放LM324K 通用四运放LM331N V-F/F-V转换器LM336 5V 基准电压电路LM336-2.5V 基准电压电路LM337T 基准电压电路1ALM338K 可调三端稳压器5ALM339N 四比较器LM348N 四741运放LM358N 低功耗双运放LM361N 高速差动比较器LM386N 声频功率放大器LM3914N 十段点线显示驱动LM393N 低功耗低失调双比较器LM399H 精密基准源(6.9)LM723CN 可调正式负稳压器LM733CN 视频放大器LM741CN 双运放LM741J 单运放MC1377 彩色电视编码器MC1403 精密电压基准源(2.5) MC1413 周边七段驱动阵列MC1416 周边七段驱动陈列MC14409 二进制脉冲拨号器MC14433 3位半A/D转换器MC14489 多字符LED显示驱动器MC145026 编码器MC145027 译码器MC145028 译码器MC145030 编码译码器MC145106 频率合成器MC145146 4位数据总线MOC3020 光耦可控硅驱动输出MOC3021 光耦可控硅驱动输出MOC3023 光耦可控硅驱动输出MOC3030 光耦可控硅驱动输出MOC3040 光耦过零触发可控硅输出MOC3041 光耦过零触发可控硅输出MOC3061 光耦过零触发可控硅输出MOC3081 光耦过零触发可控硅输出NE521 高速双差分比较器NE5532 双运放NE5534 双运放NE555J 时基电路军品极NE555N 单运放NE556 双级型双时基电路NE564 锁相环NE565 锁相环NE567 音调译码器NE592 视频放大器OP07 低噪声运放OP27 超低噪声精密运放OP37 超低噪声精密运放PC814 单光耦PC817 单光耦SG3524 PWM解调调制器SG3525 PWM解调调制器SN7404 六反相器SN7406 六反相缓冲器/驱动器SN7407 六缓冲器/驱动器SN7414 六缓冲器/驱动器SN7416 六反相缓冲器/驱动器SN7440 六反相缓冲器/驱动器SN7497 六反相缓冲器/驱动器SN74HC00 四2输入与非门SN74HC02 四2输入或非门SN74HC03 四2输入或非门SN74HC04 六反相器SN74HC05 六反相器SN74HC08 四2输入与门SN74HC10 三3输入与非门SN74HC107 双J－K触发器SN74HC11 三3输入与门SN74HC113 双J－K负沿触发器SN74HC123 双稳态多谐振荡器SN74HC125 三态缓冲器SN74HC126 四三态总线缓冲器SN74HC132 二输入与非缓冲器SN74HC137 二输入与非缓冲器SN74HC138 3－8线译码/解调器SN74HC139 双2－4线译码/解调器SN74HC14 六反相器/斯密特触发SN74HC148 8选1数据选择器SN74HC151 双4选1数据选择器SN74HC154 4－16线多路分配器SN74HC157 四2选1数据选择器SN74HC161 4位二进制计数器SN74HC163 4位二进制计数器SN74HC164 8位串入并出移位寄存器SN74HC165 8位移位寄存器SN74HC173 4D型触发器SN74HC174 6D触发器SN74HC175 4D型触发器SN74HC191 二进制同步可逆计数器SN74HC20 双四输入与门SN74HC21 双四输入与非门SN74HC221 双单稳态多谐振荡器SN74HC238 3－8线译码器SN74HC240 八缓冲器SN74HC244 八总线3态输出缓冲器SN74HC245 八总线收发器SN74HC251 三态8－1数据选择器SN74HC259 8位可寻址锁存器SN74HC266 四2输入异或非门SN74HC27 三3输入与非门SN74HC273 8D型触发器SN74HC30 八输入端与非门SN74HC32 四2输入或门SN74HC367 六缓冲器/总线驱动器SN74HC368 六缓冲器/总线驱动器SN74HC373 8D锁存器SN74HC374 8D触发器SN74HC393 双4位二进制计数器SN74HC4028 7级二进制串行加数器SN74HC4046 锁相环SN74HC4050 六同相缓冲器SN74HC4051 8选1模拟开关SN74HC4053 三2选1模拟开关SN74HC4060 14位计数/分频/振荡器SN74HC4066 四双相模拟开关SN74HC4078 3输入端三或门SN74HC42 BCD十进制译码器SN74HC4511 7段锁存/译码驱动器SN74HC4520 双二进制加法计数器SN74HC541 8位三态输出缓冲器SN74HC573 8位三态输出D型锁存器SN74HC574 8D型触发器SN74HC595 8位移位寄存器/锁存器SN74HC73 双J－K触的器SN74HC74 双D型触发器SN74HC76 双J－K触的器SN74HC86 四2输入异或门SN74HCT04 六反相器SN74LS03 四2输入与非门SN74LS04 六反相器SN74LS05 六反相器SN74LS06 六反相缓冲器/驱动器SN74LS07 六缓冲器/驱动器SN74LS08 四2输入与非门SN74LS09 四2输入与非门SN74LS10 三3输入与非门SN74LS107 双J－K触发器SN74LS109 正沿触发双J－K触发器SN74LS11 三3输入与非门SN74LS112 双J－K负沿触发器SN74LS113 双J－K负沿触发器SN74LS114 双J－K负沿触发器SN74LS12 三3输入与非门SN74LS121 单稳态多谐振荡器SN74LS122 单稳态多谐振荡器SN74LS123 双稳态多谐振荡器SN74LS124 双压控振荡器SN74LS125 三态缓冲器SN74LS126 四3态总线缓冲器SN74LS13 三3输入与非门SN74LS131 3－8线译码器SN74LS132 二输入与非触发器SN74LS133 13输入与非门SN74LS136 四异或门SN74LS137 地址锁存3－8线译码器SN74LS138 3－8线译码/转换器SN74LS139 双2－4线译码－转换器SN74LS14 六反相器.斯密特触发SN74LS145 BCD十进制译码/驱动器SN74LS147 10－4线优先编码器SN74LS148 8－3线优先编码器SN74LS15 三3输入与非门SN74LS151 8选1数据选择器SN74LS153 双4选1数据选择器SN74LS154 4－16线多路分配器SN74LS155 双2－4线多路分配器SN74LS156 双2－4线多路分配器SN74LS157 四2选1数据选择器SN74LS158 四2选1数据选择器SN74LS16 六反相缓冲器/驱动器SN74LS160 同步BDC十进制计数器SN74LS161 4位二进制计数器SN74LS162 同步BDC十进制计数器SN74LS163 4位二进制计数器SN74LS164 8位串入并出移位寄存SN74LS165 8位移位寄存器SN74LS166 8位移位寄存器SN74LS168 4位可逆同步计数器SN74LS169 4位可逆同步计数器SN74LS17 六反相缓冲器/驱动器SN74LS170 4x4位寄存器堆SN74LS172 16位多通道寄存器堆SN74LS173 4D型寄存器SN74LS174 6D型触发器SN74LS175 4D烯触发器SN74LS176 可预置十进制计数器SN74LS181 运算器/函数发生器SN74LS182 超前进位发生器SN74LS183 双进位保存全价器SN74LS189 64位随机存储器SN74LS190 同步BCD十进制计数器SN74LS191 二进制同步可逆计数器SN74LS192 BCD－同步可逆计数器SN74LS193 二进制可逆计数器SN74LS194 双向通用移位寄存器SN74LS195 并行存取移位寄存器SN74LS196 可预置十进制计数器SN74LS197 可预置二进制计数器SN74LS20 双4输入与门SN74LS21 双4输入与门SN74LS22 双4输入与门SN74LS221 双单稳态多谐振荡器SN74LS238 3－8线译码/多路转换器SN74LS240 八缓冲/驱动/接收器SN74LS241 八缓冲/驱动/接收器SN74LS242 四总线收发器SN74LS243 四总线收发器SN74LS244 八缓冲/驱动/接收器SN74LS245 八总线收发器SN74LS247 BCD－七段译码驱动器SN74LS248 BCD－七段译码驱动器SN74LS249 BCD－七段译码驱动SN74LS25 双4输入与门SN74LS251 三态8－1数据选择器SN74LS253 双三态4－1数据选择器SN74LS256 双四位选址锁存器SN74LS257 四3态2－1数据选择器SN74LS258 四2选1数据选择器SN74LS259 8位可寻址锁存器SN74LS26 四2输入与非门SN74LS260 双5输入或非门SN74LS261 2x4位二进制乘发器SN74LS266 四2输入异或非门SN74LS27 三3输入与非门SN74LS273 八进制D型触发器SN74LS275 七位树型乘法器SN74LS276 四J－K触发器SN74LS279 四R－S触发器SN74LS28 四输入端或非缓冲器SN74LS280 9位奇偶数发生校检器SN74LS283 4位二进制全加器SN74LS290 十进制计数器SN74LS293 4位二进制计数器SN74LS295 4位双向通用移位寄存器SN74LS30 八输入端与非门SN74LS32 四2输入或门SN74LS33 四2输入或门SN74LS365 六缓冲器带公用启动器SN74LS366 六缓冲器带公用启动器SN74LS367 六总线三态输出缓冲器SN74LS368 六总线三态输出反相器SN74LS37 四输入端与非缓冲器SN74LS373 8D锁存器SN74LS374 8D触发器SN74LS375 4位双稳锁存器SN74LS377 8位单输出D型触发器SN74LS38 双2输入与非缓冲器SN74LS386 四2输入异或门SN74LS390 双十进制计数器SN74LS393 双4位二进制计数器SN74LS40 四输入端与非缓冲器SN74LS42 BCD－十进制译码器SN74LS47 BCD－七段译码驱动器SN74LS48 BCD－七段译码驱动器SN74LS49 BCD－七段译码驱动器SN74LS51 三3输入双与或非门SN74LS54 四输入与或非门SN74LS55 四4输入与或非门SN74LS573 8位三态输出D型锁存器SN74LS574 8位D型触发器SN74LS63 六电流读出接口门SN74LS670 8位数字比较器SN74LS684 8位数字比较器SN74LS73 双J－K触发器SN74LS74 双D触发器SN74LS75 4位双稳锁存器SN74LS76 双J－K触发器SN74LS78 双J－K触发器SN74LS83 双J－K触发器SN74LS85 4位幅度比较器SN74LS86 四2输入异或门SN74LS88 4位全加器SN74LS90 4位十进制波动计数器SN74LS91 8位移位寄存器SN74LS92 12分频计数器SN74LS93 二进制计数器。
常用40、45、74系列标准数字电路简单介绍
CD4503六同相三态缓冲器
CD4504六电压转换器
CD4506双二组2输入可扩展或非门
CD4508双4位锁存D型触发器
CD4510可预置BCD码加/减计数器
CD4511 BCD锁存,7段译码,驱动器
CD4512八路数据选择器
CD4513 BCD锁存,7段译码,驱动器(消隐)
CD4035 4位并入/串入-并出/串出移位寄存NSC/MOT/TI
CD4038三串行加法器NSC/TI
CD4040 12级二进制串行计数/分频器NSC/MOT/TI
CD4041四同相/反相缓冲器NSC/MOT/TI
CD4042四锁存D型触发器NSC/MOT/TI
CD4043 4三态R-S锁存触发器("1"触发) NSC/MOT/TI
74155 TTL图腾柱输出译码器/分配器
74156 TTL开路输出译码器/分配器
74157 TTL同相输出四2选1数据选择器
74158 TTL反相输出四2选1数据选择器
7416 TTL开路输出六反相缓冲/驱动器
74160 TTL可预置BCD异步清除计数器
74161 TTL可予制四位二进制异步清除计数器
74139 TTL双2-4线译码器/复工器
7414 TTL六反相施密特触发器
74145 TTL BCD—十进制译码/驱动器
7415 TTL开路输出3输入端三与门
74150 TTL 16选1数据选择/多路开关
74151 TTL 8选1数据选择器
74153 TTL双4选1数据选择器
74154 TTL 4线—16线译码器
7410 TTL 3输入端3与非门
电子竞赛常用CD40系列芯片资料
例：CD4001/74LS02（四双输入或非门）1、简要功能介绍2、引脚功能图3、应用实例电路图图* 4001构成视力保护器例：CD4011/74LS08（四2输入端与非门）1、引脚功能图逻辑表达式：Y = A.B(1)当X=0、Y=0时，将使两个NAND门之输出均为1，违反触发器之功用，故禁止使用。
如真值表第一列。
(2)当X=0、Y=1时，由于X=1导致NAND-A的输出为”1”，使得NAND-B的两个输入均为”1”，因此NAND-B的输出为”0”，如真值表第二列。
(3)当X=1、Y=0时，由于Y=0导致NAND-B的输出为”1”，使得NAND-1的两个输入均为””1，因此NAND-A的输出为”0”，如真值表第三列。
(4)当X=1、Y=1时，因为一个””1不影响NAND门的输出，所以两个NAND门的输出均不改变状态，如真值表第四列。
3、应用实例电路图例：CD4012/74LS20（双4输入端与非门）例：CD4017/CD4022（十进制计数/分配器）1、简要功能介绍CD4017 是5 位Johnson 计数器，具有10 个译码输出端，CP、CR、INH 输入端。
时钟输cd4017入端的斯密特触发器具有脉冲整形功能，对输入时钟脉冲上升和下降时间无限制。
INH 为低电平时，计数器在时钟上升沿计数；反之，计数功能无效。
CR 为高电平时，计数器清零。
2、引脚功能图CO：进位脉冲输出CP：时钟输入端CR：清除端INH：禁止端Q0-Q9 计数脉冲输出端VDD：正电源VSS：地3、应用实例电路图例：CD4026(十进制计数/7段译码器)1、引脚功能图当2和15为低3为高时，数码管随脉冲0-1-2…9-02脚为高电平时计数锁存脚5.4.14一般为高显9时5脚为低显2时14脚为低4脚与3脚一至3、应用实例电路图图* 4026构成时基电路例：CD4027/74LS111、114(双J-K触发器)1、引脚功能图当jk同时为1时Qn+1=Qn’3、应用实例电路图该振荡器能产生交变的50Hz脉冲方波，其占空比为50%。
CD4049UBNSR中文资料
NOTE: When ordering, use the entire part number. The suffix R denotes tape and reel. The suffix T denotes a small-quantity reel of 250.
Pinouts
CD4049UB (PDIP, CERDIP, SOIC, SOP, TSSOP) TOP VIEW
VCC 1 G=A 2
A3 H=B 4
B5 I=C 6
C7 VSS 8
16 NC 15 L = F 14 F 13 NC 12 K = E 11 E 10 J = D 9D
CD4050B (PDIP, CERDIP, SOIC, SOP) TOP VIEW
VCC 1 G=A 2
A3 H=B 4
B5 I=C 6
SOIC - Lead Tips Only
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
2
元器件交易网
CD4049UB, CD4050B
Absolute Maximum Ratings
Thermal Information
CD4019BCSJX资料
October 1987Revised January 1999CD4019BC Quad AND-OR Select Gate© 1999 Fairchild Semiconductor Corporation DS005952.prf CD4019BCQuad AND-OR Select GateGeneral DescriptionThe CD4019BC is a complementary MOS quad AND-OR select gate. Low power and high noise margin over a wide voltage range is possible through implementation of N- and P-channel enhancement mode transistors. These comple-mentary MOS (CMOS) transistors provide the building blocks for the 4 “AND-OR select” gate configurations, each consisting of two 2-input AND gates driving a single 2-input OR gate. Selection is accomplished by control bits K A and K B . All inputs are protected against static discharge dam-age.Featuress Wide supply voltage range: 3.0V to 15V s High noise immunity:0.45 V DD (typ.)s Low power TTL compatibility:Fan out of 2 driving 74L or 1 driving 74LSApplications•AND-OR select gating •Shift-right/shift-left registers •T rue/complement selection •AND/OR/EXCLUSIVE-OR selectionOrdering Code:Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.Connection DiagramPin Assignments for DIP, SOIC and SOPTop ViewOrder Number Package NumberPackage DescriptionCD4019BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow CD4019BCSJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide CD4019BCNN16E16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 2C D 4019B CSchematic DiagramSchematic diagram for 1 of 4 identical stagesCD4019BCAbsolute Maximum Ratings (Note 1)(Note 2)Recommended Operation Conditions (Note 2)Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of “Recom-mended Operating Conditions” and “Electrical Characteristics” provide con-ditions for actual device operation.Note 2: V SS = 0V unless otherwise specified.DC Electrical Characteristics (Note 3)Note 3: V SS = 0V unless otherwise specified.Note 4: I OH and I OL are tested one output at a time.Supply Voltage (V DD )−0.5V to +18V Input Voltage (V IN )−0.5V to V DD +0.5V Storage Temperature Range (T S )−65°C to +150°CPower Dissipation (P D )Dual-In-Line 700 mW Small Outline 500 mW Lead Temperature (T L )(Soldering, 10 seconds)260°C DC Supply Voltage (V DD )+3V to +15V Input Voltage (V IN )0V toV DD V Operating T emperature Range (T A )−40°C to +85°CSymbol ParameterConditions−40°C +25°C +85°C Units MinMax MinTyp Max MinMax I DDQuiescent Device V DD = 5V 10.0317.5µA CurrentV DD = 10V 20.05215µA V DD = 15V 40.07430µA V OLLOW Level |I O | < 1 µA Output VoltageV DD = 5V 0.0500.050.05V V DD = 10V 0.0500.050.05V V DD = 15V0.0500.050.05V V OHHIGH Level |I O | < 1 µA Output VoltageV DD = 5V 4.95 4.955 4.95V V DD = 10V 9.959.95109.95V V DD = 15V14.9514.951514.95V V ILLOW Level V DD = 5V , V O = 0.5V or 4.5V 1.52 1.5 1.5V Input VoltageV DD = 10V , V O = 1.0V or 9.0V 3.04 3.0 3.0V V DD = 15V , V O = 1.5V or 13.5V 4.06 4.0 4.0V V IHHIGH Level V DD = 5V , V O = 0.5V or 4.5V 3.5 3.53 3.5V Input VoltageV DD = 10V , V O = 1.0V or 9.0V 7.07.067.0V V DD = 15V , V O = 1.5V or 13.5V 11.011.0911.0V I OLLOW Level Output V DD = 5V , V O = 0.4V 0.520.4410.36mA Current (Note 4)V DD = 10V , V O = 0.5V 1.3 1.1 2.50.9mA V DD = 15V , V O = 1.5V 3.6 3.010 2.4mA I OHHIGH Level Output V DD = 5V , V O = 4.6V −0.2−0.16−0.4−0.12mA Current (Note 4)V DD = 10V , V O = 9.5V −0.5−0.4−1.0−0.3mA V DD = 15V , V O = 13.5V −1.4−1.2−3.0−1.0mAI INInput CurrentV DD = 15V , V IN = 0V −0.30−10−5−0.30−1.0µA V DD = 15V , V IN = 15V0.3010−50.301.0µA 4C D 4019B CAC Electrical Characteristics (Note 5)T A = 25°C, C L = 50 pF , R L = 200k, unless otherwise specified Note 5: AC Parameters are guaranteed by DC correlated testing.Symbol ParameterConditions Min Typ Max Units t PHL ,Propagation Delay,V DD = 5V 100300ns t PLH Input to Output V DD = 10V 50120ns V DD = 15V 45100ns t THLHIGH-to-LOW Level V DD = 5V 100200ns T ransition TimeV DD = 10V 50100ns V DD = 15V 4080ns t TLHLOW-to-HIGH Level V DD = 5V 150300ns T ransition TimeV DD = 10V 70140ns V DD = 15V 50100ns C INInput CapacitanceAll A and B Inputs 57.5pF K A and K B Inputs1015pFCD4019BCPhysical Dimensions inches (millimeters) unless otherwise noted16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” NarrowPackage Number M16A16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WidePackage Number M16DF a irch ild d o e s n o t a ssu m e a n y re spo n sib ility fo r u se o f a n y circu itry de scrib e d , n o circu it pa ten t lice nse s a re im p lie d a nd F a irch ild re se rv e s the rig h t a t a n y tim e w ith ou t n o tice to cha n g e sa id circu itry an d sp e cifica tio n s.C D 4019B C Q u a d A N D -O R S e l e c t G a t eLIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:1.Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to the user.2. A critical component in any component of a life support device or system whose failure to perform can be rea-sonably expected to cause the failure of the life support device or system, or to affect its safety or Physical Dimensions inches (millimeters) unless otherwise noted (Continued)16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” WidePackage Number N16E。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
The C D40194B t ypes a re s upplied i n 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (NSR suffix), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)CD40194BE ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD40194BEE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeCD40194BNSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BNSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BNSRG4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMCD40194BPWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TIto Customer on an annual basis.TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant CD40194BNSR SO NS 162000330.016.48.210.5 2.512.016.0Q1CD40194BPWRTSSOPPW162000330.012.47.05.61.68.012.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) CD40194BNSR SO NS162000346.0346.033.0 CD40194BPWR TSSOP PW162000346.0346.029.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandClocks and Timers Digital ControlInterface MedicalLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityRFID TelephonyRF/IF and ZigBee®Solutions Video&ImagingWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2008,Texas Instruments Incorporated。