5082-7661-0F100中文资料

合集下载

超级密码——精选推荐

0000超级密码台达变频器的超级密码-B系列的：57522台达变频器的超级密码-H系列的：33582欧瑞变频器(也就是之前的惠丰变频器）超级密码是： 1888,1500-G 1500-P 1000-G 200-G的都是通用的烁普变频高级菜单P301输入321 MD320（汇川）万能密码是18181A000输入11,刷新程序P301输入321A000输入9,进菜单发布英威腾万能密码供大家分享50112型号CHV CHE CHF 在参数P7-00内不管设多少密码，它的万能密码是：50112部分变频器万能密码（好东西啊！分享一下）1、台达变频器的超级密码-B系列的：57522台达变频器的超级密码-H系列的：33582台达S1系列变频的万能密码：575222、欧瑞变频器(也就是之前的惠丰变频器)超级密码是：18881500-G 1500-P 1000-G 200-G的都是通用的。

3、烁普变频高级菜单P301输入321A000输入11,刷新程序P301输入321A000输入9,进菜单E001,输入机器G,PE002额定电压E003额定电流E004电压校正E005不动E006电流校正4、普传PI2000刷新设定方法（1）将C01设定为222进入P14（2）将P14设定3对CPU刷新，这时显示PI2000将C01设为222进入P14参数设定，P14设为2，P01为设定机型为G、F，P02设定变频器电压380V，P03设定变频器额定电流，P04设定电压显示，P05设定电流显示。

5、英威腾万能密码50112型号CHV、CHE 、CHF在参数P7-00内不管设多少密码，它的万能密码是：5 01126、没密码进不去，三菱740的把面板拔下来再插上就行。

7、爱默生TD3000的密码8888爱默生TD3300的密码20028、西林变频器的万能密码：6860 （以前是，现在大家试试看）。

9、ABB ACS600变频器完全参数密码NAMC主控板参数设置：1、在16.03参数中输入密码：23032、102.01参数设置为：false可以进入设定所有主控板参数。

5082-2800中文资料

Schottky Barrier Diodes for General Purpose ApplicationsTechnical DataFeatures• Low Turn-On VoltageAs Low as 0.34 V at 1 mA• Pico Second Switching Speed • High Breakdown VoltageUp to 70 V• Matched Characteristics AvailableDescription/Applications The 1N5711, 1N5712, 5082-2800/ 10/11 are passivated Schottky barrier diodes which use a patented “guard ring” design to achieve a high breakdown voltage. Packaged in a low cost glass package, they are well suited for high level detecting, mixing, switching, gating, log or A-D converting, video detecting, frequency discriminating, sampling, and wave shaping.The 5082-2835 is a passivatedSchottky diode in a low cost glasspackage. It is optimized for lowturn-on voltage. The 5082-2835 isparticularly well suited for theUHF mixing needs of the CATVmarketplace.The 5082-2300 Series and5082-2900 devices are unpas-sivated Schottky diodes in a glasspackage. These diodes haveextremely low 1/f noise and areideal for low noise mixing, andhigh sensitivity detecting. Theyare particularly well suited for usein Doppler or narrow band videoreceivers.1N57111N57125082-2300 Series5082-2800 Series5082-2900DIMENSIONS IN MILLIMETERS AND (INCHES).Outline 15Maximum RatingsJunction Operating and Storage Temperature Range5082-2303, -2900.................................................................-60°C to +100°C 1N5711, 1N5712, 5082-2800/10/11....................................-65°C to +200°C 5082-2835............................................................................-60°C to +150°C DC Power Dissipation(Measured in an infinite heat sink at T CASE = 25°C)Derate linearly to zero at maximum rated temperature5082-2303, -2900..............................................................................100 mW 1N5711, 1N5712, 5082-2800/10/11.................................................250 mW 5082-2835.........................................................................................150 mW Peak Inverse Voltage.................................................................................V BRPackage CharacteristicsOutline 15Lead Material........................................................................................DumetLead Finish..............................................................................95-5% Tin-LeadMax. Soldering Temperature................................................260°C for 5 secMin. Lead Strength....................................................................4 pounds pullTypical Package Inductance1N5711, 1N5712:................................................................................2.0 nH2800 Series:........................................................................................2.0 nH2300 Series, 2900:..............................................................................3.0 nHTypical Package Capacitance1N5711, 1N5712:................................................................................0.2 pF2800 Series:........................................................................................0.2 pF2300 Series, 2900:............................................................................0.07 pFThe leads on the Outline 15 package should be restricted so that thebend starts at least 1/16 inch from the glass body.Outline 15 diodes are available on tape and reel. The tape and reelspecification is patterned after RS-296-D.Electrical Specifications at T= 25°CAGeneral Purpose DiodesMin.Max.V F = 1 V Max.Max.Max.Breakdown Forward at Forward Reverse Leakage Capaci-Part Package Voltage Voltage Current Current tance Number Outline V BR (V)V F (mV)I F (mA)I R (nA) at V R (V)C T (pF) 5082-280015704101520050 2.0 1N571115704101520050 2.0 5082-281015204103510015 1.2 1N571215205503515016 1.2 5082-28111515410201008 1.2 5082-2835158*34010*1001 1.0 Test I R = 10 µA I F = 1 mA*V F = 0.45 V V R = 0 V Conditions*I R = 100 µA f =1.0 MHz Note: Effective Carrier Lifetime (τ) for all these diodes is 100 ps maximum measured with Krakauer method at 5 mA except for 5082-2835 which is measured at 20 mA.Low 1/f (Flicker) Noise DiodesMin.Max.V F = 1 V Max.Max.Max.Part Breakdown Forward at Forward Reverse Leakage Capaci-Number Package Voltage Voltage Current Current tance 5082-Outline V BR (V)V F (mV)I F (mA)I R (nA) at V R (V)C T (pF) 230315204003550015 1.0 29001510400201005 1.2 Test I R = 10 µA I F = 1 mA V R = 0 V Conditions f =1.0 MHzNote: Effective Carrier Lifetime (τ) for all these diodes is 100 ps maximum measured with Krakauer method at 20 mA.Matched Pairs and QuadsBasic Matched MatchedPart Number Pair Quad Batch5082-Unconnected Unconnected Matched[1]Test Conditions2900∆VF at IF= 1.0, 10 mA28005082-28045082-2805∆V F at I F = 0.5, 5 mA ∆V F = 20 mV∆V F = 20 mV*I F = 10 mA∆C O at f = 1.0 MHz28115082-2826∆VF at IF= 10 mA∆V F = 10 mV∆C O at f = 1.0 MHz ∆C O = 0.1 pF28355082-2080∆VF at IF=10 mA∆V F = 10 mV∆C O at f = 1.0 MHz∆C O = 0.1 pFNote:1. Batch matched devices have a minimum batch size of 50 devices.SPICE ParametersParameter Units5082-28005082-28105082-28115082-28355082-23035082-2900B V V75251892510C J0pF 1.60.8 1.00.70.7 1.1E G eV0.690.690.690.690.690.69I BV A10E-510E-510E-510E-510E-510E-5I S A 2.2 x 10E-9 1.1 x 10E-90.3 x 10E-8 2.2 x 10E-87 x 1.0E-910E-8N 1.08 1.08 1.08 1.08 1.08 1.08 R SΩ25101051015 P B V0.60.60.60.560.640.64 PT222222 M0.50.50.50.50.50.5Typical ParametersV F – FORWARD VOLTAGE (V)Figure 1. I-V Curve Showing Typical Temperature Variation for 5082-2300 Series and 5082-2900 Schottky Diodes.1001010.10.01I F - F O R W A R D C U R R E N T (m A )V BR (V)Figure 2. 5082-2300 Series Typical Reverse Current vs. Reverse Voltage at Various Temperatures.10.0001,000100101I R (n A )051015100755025T A = 25°CI F - FORWARD CURRENT (mA)Figure 3. 5082-2300 Series and 5082-2900 Typical Dynamic Resistance (R D ) vs. Forward Current (I F ).100010010R D - D Y N A M I C R E S I S T AN C E (Ω)0.01010100V R - REVERSE VOLTAGE (V)Figure 4. 5082-2300 and 5082-2900 Typical Capacitance vs. Reverse Voltage.1.21.00.80.60.40.20C T - C A P A C I T A N C E (p F )048121620V F - FORWARD VOLTAGE (V)Figure 5. I-V Curve Showing Typical Temperature Variation for 5082-2800 or 1N5711 Schottky Diodes.5010510.50.10.050.01I F - F O R W A R D C U R R E N T (m A )00.20.40.60.8 1.0 1.2V R - REVERSE VOLTAGE (V)Figure 6. (5082-2800 OR 1N5711) Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.100,00010,0001000100101I R - R E V E R S E C U R R E N T (n A )0.20.40.60.81.01.2V R - REVERSE VOLTAGE (V)Figure 7. (5082-2800 or 1N5711)Typical Capacitance (C T ) vs. Reverse Voltage (V R ).12.01.51.00.50C T - C A P A C I T A N C E (p F )010********V F - FORWARD VOLTAGE (V)Figure 8. I-V Curve Showing Typical Temperature Variation for the 5082-2810 or 1N5712 Schottky Diode.100101.00.10.01I F - F O R W A R D C U R R E N T (m A )V R - REVERSE VOLTAGE (V)Figure 9. (5082-2810 or IN5712)Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.10,0001000100101.0I R - R E V E R S E C U R R E N T (n A )Typical Parameters, continuedV F - FORWARD VOLTAGE (V)Figure 10. I-V Curve Showing Typical Temperature Variation for the 5082-2811 Schottky Diode.100101.00.10.01I F - F O R W A R D C U R R E N T (m A )0.40.20.60.81.01.2V R - REVERSE VOLTAGE (V)Figure 11. (5082-2811) Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.100,00010,0001000100101I R - R E V E R S E C U R R E N T (n A )0510********V F - FORWARD VOLTAGE (V)Figure 12. I-V Curve Showing Typical Temperature Variations for 5082-2835 Schottky Diode.100101.00.10.01I F - F O R W A R D C U R R E N T (m A )00.20.40.60.8 1.0 1.2V R - REVERSE VOLTAGE (V)Figure 13. (5082-2835) Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.100,00010,0001000100101I R - R E V E R S E C U R R E N T (n A )0123456V R - REVERSE VOLTAGE (V)Figure 14. Typical Capacitance (C T ) vs. Reverse Voltage (V R ).C T - C A P A C I T A N C E (p F )0246810I F - FORWARD CURRENT (mA)Figure 15. Typical Dynamic Resistance (R D ) vs. Forward Current (I F ).1000100101R D - D Y N A M I C R E S I S T A N C E (Ω)Diode Package Marking1N5xxx5082-xxxxwould be marked:1Nx xxxxx xxYWW YWWwhere xxxx are the last four digits of the 1Nxxxx or the 5082-xxxx partnumber. Y is the last digit of the calendar year. WW is the work week ofmanufacture.Examples of diodes manufactured during workweek45 of 1999:1N57125082-3080would be marked:1N53071280945945Data subject to change.Copyright © 1999 Agilent TechnologiesObsoletes 5968-4304E5968-7181E (11/99)。

5082-7661-FH400中文资料

Features• Industry Standard Size • Industry Standard Pinout7.62 mm (0.300 inch) DIP Leads on 2.54 mm (0.100 inch) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red,Yellow, Green• Excellent Appearance Evenly Lighted Segments ±50° Viewing AngleOptimum Contrast Given byGray Top Surface for AlGaAs Red and Green DevicesRed Top Surface for HER Devices Yellow Top Surface for Yellow Devices• Design Flexibility Common Anode or Common Cathode Single DigitsLeft or Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing• Intensity and Color Selection AvailableSee Intensity and Color Selected Displays Data Sheet• Sunlight Viewable AlGaAsAlGaAs [1]HER [1]Yellow Green Package Red HDSP-5082-5082-HDSP-DescriptionDrawing7610762036007.6 mm Common Anode Left Hand Decimal A 7611762136017.6 mm Common Anode Right Hand Decimal B 7613762336037.6 mm Common Cathode Right Hand Decimal C 7616762636067.6 mm Universal ±1. Overflow Right Hand Decimal [2]D E15076507660460010.9 mm Common Anode Left Hand Decimal E E15176517661460110.9 mm Common Anode Right Hand Decimal F E15376537663460310.9 mm Common Cathode Right Hand Decimal G E15676567666460610.9 mm Universal ±1. Overflow Right Hand Decimal [2]HNotes:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation.2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.Devices5082-761x Series 5082-762x Series 5082-765x Series 5082-766x Series HDSP-360x Series HDSP-460x Series HDSP-E15x Series7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays Technical DataDescriptionThe 7.6 mm (0.3 inch) and 10.9mm (0.43 inch) LED sevensegment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet).These devices use an industry standard size package andpinouts. All devices are available as either common anode or common cathode.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation4: Color Bin 4 Only (applicable for Green devices only)B: Color Bins 2 and 3 (applicable for Yellow devices only)Maximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]0: Common Anode1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa-tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.NOTES;1. DIMENSIONS IN MILLIMETRES AND (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. UNUSED DP POSITION.5. SEE INTERNALCIRCUIT DIAGRAM.6. REDUNDANT CATHODE.7. SEE PART NUMBER TABLE FOR L.H.D.P.AND R.H.D.P.DESIGNATION.8. FOR YELLOW AND GREEN DEVICES ONLY.Package DimensionsThese displays are ideal for most applications. Pin for pin equiva-lent displays are also available in a low current or high lightambient design. The low currentInternal Circuit DiagramAbsolute Maximum RatingsAlGaAs Red HER Yellow GreenHDSP-E1505082-7610/5082-7620/HDSP-3600/ Description Series7650 Series7660 Series4600 Series Units Average Power per Segment or DP9610580105mW Peak Forward Current per160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per40[2]30[4]20[6]30[8]mA Segment or DPOperating Temperature Range-20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for3 Seconds (1.59 mm [0.063 in.] 250°Cbelow Body)Notes:1.See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V8.515.0mcd I F = 20 mA(Digit Average)1.8V I F = 20 mAForward Voltage/Segment or DP V F2.03.0V I F = 100 mAHDSP-E15x Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN340°C/W/Segto-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions 5082-761x Luminous Intensity/Segment[1,2,6]340800µcd I F = 5 mA (Digit Average)I V5082-765x3401115µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nm AllReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN280°C/WJunction-to-PinDevice Series ParameterSymbol Min.Typ.Max.Units Test Conditions 5082-762x Luminous Intensity/Segment [1,2]205620µcdI F = 5 mA(Digit Average)I V5082-766x290835µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mAPeak WavelengthλPEAK 583nm Dominant Wavelength [3,7]λd 581.5586592.5nm AllReverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ-PIN280°C/W/SegJunction-to-PinYellowNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series.6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series.7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.High Performance GreenDevice Test Series ParameterSymbol Min.Typ.Max.Units Conditions HDSP-360x Luminous Intensity/Segment [1,2]8602700µcdI F = 10 mA(Digit Average)I VHDSP-460x10304000µcd I F = 10 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mAPeak WavelengthλPEAK 566nm Dominant Wavelength [3,7]λd 571577nm AllReverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ -PIN280°C/W/SegJunction-to-PinFigure 3. Forward Current vs. Forward Voltage.Figure 2. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.AlGaAs RedI D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )0I F – FORWARD CURRENT PER SEGMENT – mA2.001.501.250.750.2520401.751.000.5010305152535ηP E A K – N O R M A L I Z E D R E L A T I V E EF F I C I E N C Y0.5I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA50.0150.05.0HER, Yellow, GreenFigure 8. Allowable Peak Current vs.Pulse Duration – Green Series.Figure 9. Maximum Allowable DC Current vs.Ambient Temperature.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 10. Forward Current vs.Forward Voltage.Figure 12. Relative LuminousEfficiency (Luminous Intensity per Unit Current) vs. Peak Current.HDSP-E15x IV Bin Category Min.Max.L 8.6715.90M 13.0023.80N 19.5035.80O 29.3053.60P 43.9080.50Intensity Bin Limits (mcd)AlGaAs RedHER5082-761x IV Bin Category Min.Max.B 0.3690.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.1775082-765xIV Bin Category Min.Max.B 0.3470.593C 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751Yellow5082-762x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.413 4.4255082-766xIV Bin Category Min.Max.C 0.2970.543D 0.4450.817E 0.669 1.225F 1.003 1.838G 1.504 2.758H 2.2564.137HDSP-460xIV Bin Category Min.Max.G 1.03 1.88H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26GreenHDSP-360x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningFor information on solderingLEDs, please refer to ApplicationNote 1027.元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5963-7394EJuly 17, 20045988-3325EN。

贝利摩 butterfly 阀门 F6100-150SHP 技术数据表说明书

F6100-150SHPButterfly Valve with ANSI Class 150 Lug types• Disc 316 stainless steel• Bubble tight shut-off• Teflon seat• Valve face-to-face dimensions comply withAPI 609 & MSS-SP-67• For use with dead-end service• Completely assembled and tested, ready forinstallationType overviewType DNF6100-150SHP100 Technical dataFunctional data Valve size [mm]4" [100]Fluid chilled or hot water, up to 60% glycol, steamFluid Temp Range (water)-22...400°F [-30...204°C]Body Pressure Rating ANSI Class 150Close-off pressure ∆ps285 psiFlow characteristic modified equal percentage, unidirectionalPipe connection Flangefor use with ASME/ANSI class 150Servicing maintenance-freeFlow Pattern2-wayLeakage rate0%Controllable flow range quarter turn, mechanically limitedCv451Maximum Inlet Pressure (Steam)50 psiMaximum Velocity32 FPSLug threads5/8-11 UNCMaterials Valve body Carbon steel full lug (ASME B16.34)Stem17-4 PH stainless steelSeat RPTFEBearing glass backed PTFEDisc316 stainless steelSuitable actuators Non Fail-Safe PRB(X)GMB(X)Spring(2*AFB(X))Electrical fail-safe PKRB(X)GKRB(X)•Safety notesWARNING: This product can expose you to lead which is known to the State of California tocause cancer and reproductive harm. For more information go to F6100-150SHPProduct featuresFlow/Mounting detailsDimensionsType DN WeightF6100-150SHP10010 lb [4.5 kg]A B C D E F Number of Bolt Holes18.0" [457] 2.1" [54]24.0" [610]20.5" [521] 4.3" [110] 4.3" [110]8A B C D E F Number of Bolt Holes18.9" [480] 2.2" [56]24.3" [616]20.1" [511] 4.3" [110] 4.3" [110]8A B C D E F Number of Bolt Holes15.3" [388] 2.2" [56]18.7" [476]14.8" [377] 3.9" [100] 3.9" [100]8A B C D E F Number of Bolt Holes10.9" [277] 2.2" [56]20.3" [515]15.5" [394] 4.9" [124] 4.9" [125]8A B C D E F Number of Bolt Holes9.1" [231] 2.2" [56]17.2" [438]13.3" [338] 3.9" [100] 3.9" [100]8F6100-150SHPDimensionsA B C D E F Number of Bolt Holes14.1" [358] 2.2" [56]24.9" [632]19.6" [498] 5.4" [137] 5.4" [137]8MFT/programmable, Non fail-safe, 24 VTechnical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 HzNominal voltage rangeAC 19.2...28.8 V / DC 21.6...28.8 V Power consumption in operation 4 W Power consumption in rest position 1.5 W Transformer sizing 7 VAElectrical Connection 18 GA plenum cable, 1 m, with 1/2" NPT conduit connector (3 m and 5 m available)Overload Protectionelectronic throughout 0...95° rotation Functional dataTorque motor 40 Nm Operating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mA, 1500 Ω for PWM, On/Off and Floating point Operating range Y variable Start point 0.5...30 V End point 2.5...32 VOperating modes optional variable (VDC, on/off, floating point)Position feedback U 2...10 V Position feedback U note Max. 0.5 mA Position feedback U variable VDC variableDirection of motion motor selectable with switch 0/1Manual override external push button Angle of rotation Max. 95°Angle of rotation note adjustable with mechanical stop Running Time (Motor)150 s / 90°Running time motor variable 90...150 s Noise level, motor 45 dB(A)Position indicationMechanical, 30...65 mm stroke Safety dataPower source ULClass 2 Supply Degree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02CE acc. to 2014/30/EU and 2014/35/EU Quality Standard ISO 9001UL 2043 CompliantSuitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMCAmbient humidity Max. 95% RH, non-condensing Ambient temperature -22...122°F [-30...50°C]Storage temperature-40...176°F [-40...80°C]FootnotesSafety dataServicing maintenance-free Weight Weight4.2 lb [1.9 kg]MaterialsHousing material Galvanized steel and plastic housing†Rated Impulse Voltage 800V, Type action 1, Control Pollution Degree 3.AccessoriesElectrical accessoriesDescriptionType Battery backup system, for non-spring return models NSV24 US Battery, 12 V, 1.2 Ah (two required)NSV-BAT Belimo PC-Tool, Software for adjustments and diagnostics MFT-P Feedback potentiometer 140 Ω add-on, grey P140A GR Feedback potentiometer 500 Ω add-on, grey P500A GR Feedback potentiometer 1 kΩ add-on, grey P1000A GR Feedback potentiometer 2.8 kΩ add-on, grey P2800A GR Feedback potentiometer 5 kΩ add-on, grey P5000A GR Feedback potentiometer 10 kΩ add-on, grey P10000A GR Auxiliary switch 1x SPDT add-on S1A Auxiliary switch 2x SPDT add-onS2AConnecting cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminalZK2-GEN Service tool, with ZIP-USB function, for programmable andcommunicative Belimo actuators, VAV controller and HVAC performance devicesZTH USElectrical installationINSTALLATION NOTESActuators with appliance cables are numbered.Provide overload protection and disconnect as required.Actuators may also be powered by DC 24 V.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Control signal may be pulsed from either the Hot (Source) or Common (Sink) 24 V line.For triac sink the Common connection from the actuator must be connected to the Hotconnection of the controller. Position feedback cannot be used with a triac sink controller; theactuator internal common reference is not compatible.IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number 40155).Actuators may be controlled in parallel. Current draw and input impedance must be observed.Master-Slave wiring required for piggy-back applications. Feedback from Master to controlinput(s) of Slave(s).Meets cULus requirements without the need of an electrical ground connection.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.Wiring diagramsOn/Off Floating PointVDC/mA Control PWM ControlOverride Control Primary - Secondary。

佳能复印机错误代码细节

佳能复印机错误代码细节维修模式：IR2320j/3300开机后按*键，再按2.8（同时按），再按*（几秒内完成）。

iR C2220 按左右键三秒，然后按菜单键[E602-XXYY][补救措施]当执行HD-CLEAR 时，所涉及的分区的所有内容（文件、子目录）将损失。

当机器在执行HD-CLEAN时关闭后实际格式化在机器启动时进行。

这时，启动屏幕显示进程条，其边缘在大约5min内达到终点。

确定不要在进程条移动时关闭电源。

此功能（即模式项）无法用于BOOTDEV 和DOSDEV4 ；要重新格式化这2个分区的任何一个，必须使用SST。

记住在维修模式中格式化硬盘驱动器必须为完全格式化。

- HD-CHECK如果当数据写入到硬盘驱动器时切断电源，有可能发生扇区写入中止。

当在这样的扇区上运行HD-CHECK 时，将进行维修，但扇区中的所有数据将丢失。

写入中止的扇区可仅通过HDD-CHECK （0）进行维修；如果类型- 类型不为0，任务将限于FS水平的检查。

如果含有控制区的一个重要扇区出现写入中止的扇区，则无法修复；您必须执行硬盘驱动器格式化。

- 更换硬盘驱动器1. 关闭主开关。

2. 连接新的硬盘驱动器。

3. 在安全模式中启动机器。

4. 连接SST，并执行完全格式化。

5. 使用SST，下l 载系统软件（系统、语言、RUI）。

6. 关闭然后再打开电源。

（机器启动可能需要花费大约5min）清E000000-000代码：开机后按*键，再按2.8（同时按），再按*（几秒内完成）。

按COPIER-FUNCTION-CLEAR-ERR-OK。

关机再打开。

0i-F系列系统简介V3.1_orderlist

0i-F系列系统简介V3.1_orderlist3 Orderlist变化说明内容0i-MD(1包)0i-MF Type 10i-TD(1包)0i-TF Type 1Type 1A02B-0320-H532A02B-0340-H530A02B-0319-H532A02B-0339-H530 A02B-0320-H533A02B-0319-H533基本单元0槽A02B-0319-B500A02B-0338-B500A02B-0319-B500A02B-0338-B500基本单元2槽A02B-0319-B502A02B-0338-B502A02B-0319-B502A02B-0338-B502主板A02B-0319-H120A02B-0338-H101A02B-0319-H120A02B-0338-H101 A02B-0319-H121A02B-0319-H121A02B-0319-H122A02B-0319-H122A02B-0319-H123A02B-0319-H123轴卡A02B-0319-H032集成于主板A02B-0319-H031集成于主板A02B-0319-H033A02B-0319-H032A02B-0319-H034A02B-0319-H033A02B-0319-H034A02B-0319-H042A02B-0319-H043内容0i-MD(1包)0i-MF Type 10i-TD(1包)0i-TF Type 1电源0槽A02B-0319-H111A02B-0338-H110A02B-0319-H111A02B-0338-H110电源2槽A02B-0319-H112A02B-0338-H112A02B-0319-H112A02B-0338-H112FROM/SRAM存储器A02B-0319-H056A02B-0338-H056A02B-0319-H056A02B-0338-H056 A02B-0319-H057A02B-0338-H057A02B-0319-H057A02B-0338-H057铭牌A02B-0320-H190A02B-0340-H190A02B-0319-H190A02B-0339-H190电缆卡⼦A02B-0124-K001A02B-0303-K001A02B-0124-K001A02B-0303-K001 A02B-0303-K001A02B-0303-K001MDI A02B-0319-C125#M A02B-0323-C125#M A02B-0319-C125#T A02B-0323-C125#T A02B-0319-C126#M A02B-0323-C126#M A02B-0319-C126#T A02B-0323-C126#T A02B-0303-C120#M A02B-0323-C120#M A02B-0303-C120#T A02B-0323-C120#T空槽板A02B-0319-J190A02B-0338-J190A02B-0319-J190A02B-0338-J190控制单元保险A02B-0236-K100A02B-0236-K100A02B-0236-K100A02B-0236-K100电池A02B-0309-K102A02B-0323-K102A02B-0309-K102A02B-0323-K102风扇A02B-0309-K120A02B-0323-K120A02B-0309-K120A02B-0323-K120内容0i-MD(1包)0i-MF Type 10i-TD(1包)0i-TF Type 1 8.4“横置(USB)A02B-0319-H164#M A02B-0338-H144#M A02B-0319-H164#T A02B-0338-H144#T8.4“纵置(USB)A02B-0319-H165#M A02B-0338-H145#M A02B-0319-H165#T A02B-0338-H145#T8.4“横置(USB)A02B-0319-H168#M A02B-0338-H148#M A02B-0319-H168#T A02B-0338-H148#T 带触摸屏8.4“纵置(USB)A02B-0319-H169#M A02B-0338-H149#M A02B-0319-H169#T A02B-0338-H149#T 带触摸屏10.4 横置A02B-0319-H160A02B-0338-H141A02B-0319-H160A02B-0338-H14110.4 横置，A02B-0319-H161A02B-0338-H142A02B-0319-H161A02B-0338-H142触摸屏10.4 横置，A02B-0319-H162A02B-0338-H142A02B-0319-H162A02B-0338-H142触摸屏+软键内容0i-MD(1包)0i-MF Type 10i-TD(1包)0i-TF Type 1机械组数-A02B-0340-S836#1-A02B-0339-S836#1路径数-A02B-0340-S801#1A02B-0319-S801#1A02B-0339-S801#1 --A02B-0319-S801#2A02B-0339-S801#2伺服电机数-A02B-0338-J398#n-A02B-0338-J398#n 使⽤SDU电机数-A02B-0338-J388#m-A02B-0338-J388#m 选项功能A02B-0320-xxxx A02B-0340-xxxx A02B-0319-xxxx A02B-0339-xxxx控制轴数扩展A02B-0320-R689A02B-0340-R689A02B-0319-R689A02B-0339-R689软件A08B-9010-J555#ZZ12A08B-9010-J555#ZZ12光盘A08B-9012-J008#CM A08B-9012-J013#12A08B-9012-J008#CMA08B-9012-J013#12内容0i Mate-MD(3包)0i-MF Type 30i Mate-TD(3包)0i-TF Type 3 Type 3A02B-0322-H532A02B-0340-H533A02B-0321-H532A02B-0339-H533基本单元0槽A02B-0321-B500A02B-0338-B520A02B-0321-B500A02B-0338-B520主板A02B-0319-H125A02B-0338-H106A02B-0319-H125A02B-0338-H106轴卡集成于主板A02B-0319-H031集成于主板A02B-0319-H032A02B-0319-H032A02B-0319-H033A02B-0319-H033电源A02B-0319-H111集成于主板A02B-0319-H111集成于主板FROM/SRAM存储器A02B-0319-H051A02B-0338-H056*A02B-0319-H051A02B-0338-H056*铭牌A02B-0322-H190A02B-0340-H190A02B-0321-H190A02B-0339-H190电缆卡⼦A02B-0124-K001A02B-0303-K001A02B-0124-K001A02B-0303-K001 A02B-0303-K001A02B-0303-K001内容0i Mate-MD(3包)0i-MF Type 30i Mate-TD(3包)0i-TF Type 3 8.4“横置(USB)A02B-0319-H164#M A02B-0338-H144#MA02B-0319-H164#T A02B-0338-H144#T8.4“纵置(USB)A02B-0319-H165#M A02B-0338-H145#M A02B-0319-H165#T A02B-0338-H145#T8.4“横置(USB)A02B-0319-H168#M A02B-0338-H148#M A02B-0319-H168#T A02B-0338-H148#T 触摸屏8.4“纵置(USB)A02B-0319-H169#M A02B-0338-H149#M A02B-0319-H169#T A02B-0338-H149#T 触摸屏控制单元保险A02B-0236-K100A02B-0236-K100A02B-0236-K100A02B-0236-K100电池A02B-0309-K102A02B-0323-K102A02B-0309-K102A02B-0323-K102风扇A02B-0309-K120A02B-0323-K120A02B-0309-K120A02B-0323-K120内容0i Mate-MD(3包)0i-MF Type 30i Mate-TD(3包)0i-TF Type 3机械组数-A02B-0340-S836#1-A02B-0339-S836#1路径数-A02B-0340-S801#1-A02B-0339-S801#1伺服电机数-A02B-0338-J398#n-A02B-0338-J398#n 使⽤SDU电机数-A02B-0338-J388#m-A02B-0338-J388#m 选项功能A02B-0322-xxxx A02B-0340-xxxx A02B-0321-xxxx A02B-0339-xxxx控制轴数扩展A02B-0320-R689-A02B-0319-R689A02B-0339-R689同时控制轴扩展A02B-0322-J803-A02B-0321-J803-软件A08B-9010-J555#ZZ12A08B-9010-J555#ZZ12光盘A08B-9012-J008#CM A08B-9012-J013#12A08B-9012-J008#CMA08B-9012-J013#12内容0i Mate-MD(5包)0i-MF Type 50i Mate-TD(5包)0i-TF Type 5 Type 5A02B-0322-H535A02B-0340-H535A02B-0321-H535A02B-0339-H535基本单元0槽A02B-0321-B530A02B-0338-B520A02B-0321-B530A02B-0338-B520主板(模拟)A02B-0322-H136A02B-0338-H107A02B-0322-H136A02B-0338-H107主板(串⾏)A02B-0322-H137A02B-0338-H108A02B-0322-H137A02B-0338-H108电源集成于主板集成于主板集成于主板集成于主板轴卡集成于主板集成于主板集成于主板集成于主板FROM/SRAM存A02B-0319-H061A02B-0338-H056*A02B-0319-H061A02B-0338-H056*储器铭牌A02B-0322-H190A02B-0340-H190A02B-0321-H190A02B-0339-H190电缆卡⼦A02B-0303-K001A02B-0303-K001A02B-0303-K001A02B-0303-K001内容0i Mate-MD(5包)0i-MF Type 50i Mate-TD(5包)0i-TF Type 5 8.4“横置(USB)A02B-0319-H174#M A02B-0338-H144#M A02B-0319-H174#T A02B-0338-H144#T8.4“纵置(USB)A02B-0319-H175#M A02B-0338-H145#M A02B-0319-H175#T A02B-0338-H145#T8.4“横置(USB)A02B-0319-H178#M A02B-0338-H148#M A02B-0319-H178#T A02B-0338-H148#T 触摸屏8.4“纵置(USB)A02B-0319-H179#M A02B-0338-H149#M A02B-0319-H179#T A02B-0338-H149#T 触摸屏控制单元保险A02B-0236-K100A02B-0236-K100A02B-0236-K100A02B-0236-K100电池A02B-0323-K102A02B-0323-K102A02B-0323-K102A02B-0323-K102电缆卡⼦A02B-0303-K001A02B-0303-K001A02B-0303-K001A02B-0303-K001内容0i Mate-MD(5包)0i-MF Type 50i Mate-TD(5包)0i-TF Type 5机械组数-A02B-0340-S836#1-A02B-0339-S836#1路径数-A02B-0340-S801#1-A02B-0339-S801#1伺服电机数A02B-0322-R419#n A02B-0338-J398#n A02B-0321-R419#n A02B-0338-J398#n 使⽤SDU电机数-A02B-0338-J388#m-A02B-0338-J388#m 选项功能A02B-0322-xxxx A02B-0340-xxxx A02B-0321-xxxx A02B-0339-xxxx控制轴数扩展A02B-0320-R689-A02B-0319-R689A02B-0339-R689同时控制轴扩展A02B-0322-J803-A02B-0321-J803-软件A08B-9010-J555#ZZ12A08B-9010-J555#ZZ12光盘A08B-9012-J008#CM A08B-9012-J013#12A08B-9012-J008#CMA08B-9012-J013#12FROM/SRAM存储器的选择需根据Option Assembly计算得到，当存在以下功能时需使⽤128M/2M：Designation of Control paths: 2paths (S801#2)Function for loader control (R417)Tool management function (S830, S831, S833)C Language Executor additional SRAM (J736, S827)Quick program restart (R630)Quick program restart II(R414)Peripheral axis control (R725)FANUC PICTURE function (S879)Nonvolatile PMC data table area expansion (40KB)(S967#40K)Nonvolatile PMC extra relay function (S984#10K)Robot connection function (R683)Multi-path PMC function (3 paths) (R855#3)MANUAL GUIDE i(S790)MANUAL GUIDE 0i (S772)IO类型IO单元0i-D系列IO Link0i-F系列IO Link i电⽓柜⽤IO单元（0i⽤IO单元）I/O unit for 0i A02B-0309-C001A02B-0319-C001操作⾯板⽤IO模块I/O module for operator's panel A1A03B-0815-K200A03B-0824-K200 I/O module for operator's panelB1A03B-0815-K202A03B-0824-K202 I/O module for power magnetics cabinet B2A03B-0815-K203A03B-0824-K203分线盘⽤IO模块I/O module for connector panel B1A03B-0815-C001A03B-0824-C001 I/O module for connector panel EAA03B-0815-C002A03B-0824-C002 I/O module for connector panel EB A03B-0815-C003A03B-0824-C003 I/O module for connector panel EC A03B-0815-C004A03B-0824-C004 I/O module for connector panel ED A03B-0815-C005A03B-0824-C005 I/O module for connector panel Cablefor module connectionA03B-0815-K100A03B-0815-K100 I/O module type-2 for connector panel B1A03B-0815-C040A03B-0824-C040 I/O module type-2 for connector panel B2A03B-0815-C041A03B-0824-C041 I/O module type-2 for connector panel E1A03B-0815-C042A03B-0824-C042 Cable of I/O module type-2 for connectorpanel for module connectionA03B-0815-K102A03B-0815-K102端⼦转换适配器TERMINAL CONVERSION ADAPTER TA1A03B-0824-K151 TERMINAL CONVERSION ADAPTERTA2A03B-0824-K152 TERMINAL CONVERSION ADAPTER TA3A03B-0824-K153IO类型IO单元0i-D系列IO Link0i-F系列IO Link i端⼦型IO模块Terminal Type I/O module Basic Module A03B-0823-C001A03B-0823-C011 Terminal Type I/O module Extension module A A03B-0823-C002A03B-0823-C012 Terminal Type I/O module Extension module B A03B-0823-C003A03B-0823-C013 Terminal Type I/O module Extension module C A03B-0823-C004A03B-0823-C014 Terminal Type I/O module Extension module D A03B-0823-C005A03B-0823-C015 Terminal Type I/O module Extension module E A03B-0823-C006A03B-0823-C016 Terminal Type I/O module Extension cable A A03B-0823-K100A03B-0823-K100操作⾯板Machine operator's panel Main panel A(Symbolic & English key)A02B-0319-C242Machine operator's panel Main panel B(Symbolic & English key)A02B-0319-C243A02B-0323-C231 Safety Machine operator's panel A02B-0323-C234 Safety Machine operator's panel type B A02B-0323-C235光缆适配器Optical I/O link adapter A13B-0154-B001A13B-0154-B101 IO UNITMODELAIO UNIT MODEL A A03B-0819-Jxxx A03B-0826-JxxxSDU名称0i-D系列0i-F系列Position detector I/F unit A02B-0303-C205A02B-0323-C205Separate Detector I/F Unit Additional 4A02B-0236-C204A02B-0323-C204 AxesAnalog input separate detector I/F unitA06B-6061-C201A06B-6061-C202 Basic 4 axesαi-B放⼤器3.3放⼤器对⽐项αi放⼤器αi-B放⼤器αiPS电源模块A06B-6140-HxxxA06B-6150-HxxxA06B-6200-HxxxA06B-6250-HxxxαiSV伺服模块A06B-6117-HxxxA06B-6127-HxxxA06B-6240-HxxxA06B-6290-HxxxαiSP主轴模块A06B-6141-Hxxx#H580A06B-6142-Hxxx#H580A06B-6151-Hxxx#H580A06B-6152-Hxxx#H580A06B-6220-Hxxx#H600A06B-6270-Hxxx#H600交流电抗器/浪涌接收器原型号新型号放⼤器⽤插头A06B-6071-K203A06B-6200-K200电池单元⼀致保险A06B-6077-K250A06B-6073-K250A06B-6073-K250主轴电缆A02B-0236-K845主轴信号与伺服共⽤FSSB光缆（省配线，传输速度快）加⼯性能提升机械效率提升易⽤性提升z 伺服HRV + 控制z FSSB⾼速刚性攻丝z 风扇电机前端维护z 故障诊断z 主轴电机智能加减速z 安全扭矩关断功能（STO）放⼤器对⽐项现有βiSVSP放⼤器βiSVSP-B放⼤器订货规格号A06B-6164-Hxxx#H580A06B-6320-Hxxx风扇单元*-7.5/11/15：A06B-6134-K001*-18：A06B-6134-K006内置冷却风扇单元⽆需单独订购电池单元⼀致放⼤器插头A06B-6134-K201A06B-6200-K200电抗器/浪涌接收器A81L-0001-0155/0156/0157A06B-6200-K141A81L-0001-0184/0185/0186A06B-6200-K141主轴连接A02B-0236-K845主轴信号与伺服共⽤FSSB光缆（省配线，传输速度快）伺服扩展通过右下⾓端⼦扩展SV/SP直接使⽤短路棒扩展附：具体细节变化请参考技术报告TMS14-049E βiSV-B单体放⼤器3.3放⼤器对⽐项现有βiSV单体放⼤器βiSV-B单体放⼤器订货规格号A06B-6130-Hxxx(单轴)A06B-6131-Hxxx(单轴HV)A06B-6136-Hxxx(双轴)A06B-6160-Hxxx(单轴)A06B-6161-Hxxx(单轴HV)A06B-6166-Hxxx(双轴)(A06B-6166-H201#A)风扇单元/电池单元⼀致放⼤器插头⼀致线性滤波器/放电电阻⼀致I/O Link I/F规格A06B-6132-Hxxx(单轴)A06B-6133-Hxxx(单轴HV)A06B-6162-Hxxx(单轴)A06B-6163-Hxxx(单轴HV)附：IO Link轴注意使⽤⽼电机。

Leviton Wireless Decora 0-10V Room Controller with

Leviton Manufacturing Co., Inc. Lighting & Controls10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004 ©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.DescriptionWireless Decora ® 0-10V Room Controller with 5A Relay (DL057) is the primary user interface combining both familiar toggle ON/OFF control, dimming control and energy management business logic into line voltage-powered wireless controldevices. Requires use with Lumina™ RF Keypad Room Controller or GreenMAX ® DRC Wireless Keypad Room Controller.The DL057 works with compatible wireless devices to create an advanced intelligent lighting system. The DL057 alsoprovides the primary interface between the smartphone/tablet commissioning and control device. The DL057 manages a room by coordinating activities of all wireless devices within thespace and can be used to control loads up to 5A.Wireless Decora ® 0-10V Dimmer Room Controller with 5A RelayApplications• Bluetooth interface for connection to any Android or iOS devices with Bluetooth 4.0 with BLE • Configuration • Control• Status monitoring • Every node is a repeater • Line voltage powered • LED status indicators • Decora aesthetic• Complies with IEEE 80.15.4 standards—for domestic and international wireless networks• Can be used to meet energy code requirements forIECC, ASHRAE 90.1 and 2019 Title 24, Part 6 space/area control, dimming, manual-ON/OFF, occupancy control and automatic shutoff requirementsDimensions DiagramWiring Diagram*Depending on manufacture date, pink wire may be grayUser InterfaceSpecificationsLES-G-10377B/H22-aaREV AUG 2022Leviton Manufacturing Co., Inc. Lighting & Controls10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004 ©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.。

Infineon TLE4966-2K高精度双输出电磁感应切换器数据手册（版本1.0）说明书

TLE4966-2KHigh Precision Hall Switch with two OutputsDatasheetRev.1.0, 2010-06-28Edition 2010-06-28Published byInfineon Technologies AG81726 Munich, Germany© 2010Infineon Technologies AGAll Rights Reserved.Legal DisclaimerThe information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.InformationFor further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office ().WarningsDue to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office.Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.TLE4966-2KRevision History: 2010-06-28, Rev.1.0Previous Revision:Page Subjects (major changes since last revision)Trademarks of Infineon Technologies AGABM™, BlueMoon™, CONVERGATE™, COSIC™, C166™, FALC™, GEMINAX™, GOLDMOS™, ISAC™, OMNITUNE™, OMNIVIA™, PROSOC™, SEROCCO™, SICOFI™, SIEGET™, SMARTi™, SMINT™, SOCRATES™, VINAX™, VINETIC™, VOIPRO™, X-GOLD™, XMM™, X-PMU™, XWAY™Other TrademarksMicrosoft®, Visio®, Windows®, Windows Vista®, Visual Studio®, Win32® of Microsoft Corporation. Linux® of Linus Torvalds. FrameMaker®, Adobe® Reader™, Adobe Audition® of Adobe Systems Incorporated. APOXI®, COMNEON™ of Comneon GmbH & Co. OHG. PrimeCell®, RealView®, ARM®, ARM® Developer Suite™ (ADS), Multi-ICE™, ARM1176JZ-S™, CoreSight™, Embedded Trace Macrocell™ (ETM), Thumb®, ETM9™, AMBA™, ARM7™, ARM9™, ARM7TDMI-S™, ARM926EJ-S™ of ARM Limited. OakDSPCore®, TeakLite® DSP Core, OCEM® of ParthusCeva Inc. IndoorGPS™, GL-20000™, GL-LN-22™ of Global Locate. mipi™ of MIPI Alliance. CAT-iq™ of DECT Forum. MIPS™, MIPS II™, 24KEc™, MIPS32®, 24KEc™ of MIPS Technologies, Inc. Texas Instruments®, PowerPAD™, C62x™, C55x™, VLYNQ™, Telogy Software™, TMS320C62x™, Code Composer Studio™, SSI™ of Texas Instruments Incorporated. Bluetooth® of Bluetooth SIG, Inc. IrDA® of the Infrared Data Association. Java™, SunOS™, Solaris™ of Sun Microsystems, Inc. Philips®, I2C-Bus® of Koninklijke Philips Electronics N.V. Epson® of Seiko Epson Corporation. Seiko® of Kabushiki Kaisha Hattori Seiko Corporation. Panasonic® of Matsushita Electric Industrial Co., Ltd. Murata® of Murata Manufacturing Company. Taiyo Yuden™of Taiyo Yuden Co., Ltd. TDK® of TDK Electronics Company, Ltd. Motorola® of Motorola, Inc. National Semiconductor®, MICROWIRE™ of National Semiconductor Corporation. IEEE® of The Institute of Electrical and Electronics Engineers, Inc. Samsung®, OneNAND®, UtRAM® of Samsung Corporation. Toshiba® of Toshiba Corporation. Dallas Semiconductor®, 1-Wire® of Dallas Semiconductor Corp. ISO® of the International Organization for Standardization. IEC™ of the International Engineering Consortium. EMV™ of EMVCo, LLC. Zetex® of Zetex Semiconductors. Microtec® of Microtec Research, Inc. Verilog® of Cadence Design Systems, Inc. ANSI® of the American National Standards Institute, Inc. WindRiver® and VxWorks® of Wind River Systems, Inc. Nucleus™ of Mentor Graphics Corporation. OmniVision® of OmniVision Technologies, Inc. Sharp® of Sharp Corporation. Symbian OS® of Symbian Software Ltd. Openwave® of Openwave Systems, Inc. Maxim® of Maxim Integrated Products, Inc. Spansion® of Spansion LLC. Micron®, CellularRAM® of Micron Technology, Inc. RFMD® of RF Micro Devices, Inc. EPCOS® of EPCOS AG. UNIX® of The Open Group. Tektronix® of Tektronix, Inc. Intel® of Intel Corporation. Qimonda® of Qimonda AG. 1GOneNAND® of Samsung Corporation. HyperTerminal® of Hilgraeve, Inc. MATLAB® of The MathWorks, Inc. Red Hat® of Red Hat, Inc. Palladium® of Cadence Design Systems, Inc. SIRIUS Satellite Radio® of SIRIUS Satellite Radio Inc. TOKO® of TOKO Inc.The information in this document is subject to change without notice.Last Trademarks Update 2008-11-17Trademarks of Infineon Technologies AG . . . . . . . . . . . . . . . . . . . . . . 31Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3Pin Configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2Circuit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3Application Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Electrical and Magnetic Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Field Direction Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6Timing Diagrams for the Speed Outputs . . . . . . . . . . . . . . . . . . . . . . . . 11 7Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7.1Package Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7.2Distance between Chip and Package Surface . . . . . . . . . . . . . . . . . . . . . . 12 7.3Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12PCB Footprint for PG-TSOP6-6-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Product Name Product Type Ordering Code Package TLE4966-2K Double Hall SwitchSP000788888PG-TSOP6-6-5High Precision Hall Switch with two OutputsTLE4966-2K1Overview1.1Features• 2.7V to 24V supply voltage operation•Operation from unregulated power supply •High sensitivity and high stability of the magnetic switching points•High resistance to mechanical stress by Active Error Compensation •Reverse battery protection (-18V)•Superior temperature stability •Peak temperatures up to 195°C •Low jitter (typ. 1μs)•Digital output signals•Excellent matching of the 2 Hall probes •Hall plate distance 1.45mm•Two independent speed outputs •SMD package PG-TSOP6-6-51.2Functional DescriptionThe TLE4966-2K is an integrated circuit dual Hall-effect sensor designed specifically for highly accurate applications. Precise magnetic switching points and high temperature stability are achieved by active compensation circuits and chopper techniques on chip. The sensor provides two independent speed outputs at Q1 and Q2 with the status (high or low) corresponding to the magnetic field value at the respective Hall element H1 and H2. Both Hall elements have the identical thresholds for B OP and B RP (B OP1 = B OP2 and B RP1 = B RP2). For positive magnetic fields (south pole) exceeding the threshold B OP1 and/or B OP2 the corresponding output Q1 and/or Q2 is low, whereas for negative magnetic fields (north pole) lower than B RP the output switches to high. Due to the spatial distance of the two Hall elements on the chip (d = 1.45mm) the two output signals will show a phase difference in case the sensor is used with a rotating magnetized pole wheel.Overview 1.3Pin Configuration (top view)Table 1Pin Definitions and FunctionsPin No.Symbol Function1Q2Speed 22GND Recommended connection to GND3Q1Speed 14V DD Supply voltage5GND Recommended connection to GND6GND GroundGeneral 2General2.1Block Diagram2.2Circuit DescriptionThe chopped Dual Hall Switch comprises two Hall probes, bias generator, compensation circuits, oscillator, and output transistors.The bias generator provides currents for the Hall probes and the active circuits. Compensation circuits stabilize the temperature behavior and reduce influence of technology variations.The Active Error Compensation rejects offsets in signal stages and the influence of mechanical stress to the Hall probes caused by molding and soldering processes and other thermal stresses in the package. This chopper technique together with the threshold generator and the comparator ensures high accurate magnetic switching thresholds.Maximum Ratings2.3Application CircuitIt is recommended to use a series resistor R S with 200Ω and a capacitor of C S = 4.7nF for protection againstFigure 3Application Circuit3Maximum RatingsNote:Stresses above those listed here may cause permanent damage to the device. Exposure to absolutemaximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit.Table 2Absolute Maximum Ratings T j = -40°C to 150°CParameterSymbolLimit Values UnitConditionsmin.max.Supply voltageV DD V s V s -18 -18 -1818 24 26Vfor 1 h, R S ≥ 200 Ω for 5 min, R S ≥ 200 ΩSupply current through protection device I DD-5050mAOutput voltage V Q -0.7 -0.718 26V************Ω pull upContinuous output current I Q -5050mA Junction temperatureT j– – – –155 165 175 195°Cfor 2000 h (not additive) for 1000 h (not additive) for 168 h (not additive) for 3 x 1 h (additive)Storage temperature T S -40150°C Magnetic flux densityB–unlimitedmTTable 3ESD Protection 1)1)Human Body Model (HBM) tests according to: EOS/ESD Association Standard S5.1-1993 and Mil. Std. 883D method3015.7Parameter SymbolLimit Values UnitNotesmin.max.ESD voltageV ESD–±4kVHBM , R = 1.5 k Ω, C = 100 pF T A = 25°COperating Range4Operating RangeThe following operating conditions must not be exceeded in order to ensure correct operation of the TLE4966-2K. All parameters specified in the following sections refer to theses operating conditions unless otherwise mentioned.Table 4Operating RangeParameter SymbolLimit Values UnitConditionsmin.typ.max.Supply voltageV DD V S V S 2.7 – –– – –18 24 26V1 h with R S ≥ 200 Ω for 5 min R S ≥ 200 ΩOutput voltage V Q -0.7–18V Junction temperature T j -40 –– –150 175°Cfor 168 hOutput currentI Q–10mAElectrical and Magnetic Parameters5Electrical and Magnetic ParametersProduct characteristics involve the spread of values guaranteed within the specified voltage and temperature range. Typical characteristics are the median of the production.Table 5Electrical Characteristics 1)1)over operating range, unless otherwise specified. Typical values correspond to V DD = 12 V and T A = 25°CParameter SymbolLimit Values UnitConditionsmin.typ.max.Supply currentI DD4 5.27mA V DD = 2.7 V ... 18 V Reverse current I SR 00.21mA V DD = -18 V Output saturation voltage V QSAT –0.30.6V I Q = 10 mA Output leakage current I QLEAK –0.0510μA for V Q = 18 VOutput fall time t f –0.21μs R L = 1.2 k Ω; C L < 50 pFsee: Figure 4 on Page 11Output rise time t r –0.21μs Chopper frequency f OSC –320–kHz Switching frequency f SW 0–15 2)2)To operate the sensor at the max. switching frequency, the magnetic signal amplitude must be 1.4 times higher than forstatic fields. This is due to the -3 dB corner frequency of the low pass filter in the signal path.kHz Delay time 3)3)Systematic delay between magnetic threshold reached and output switching t d –13–μs Count Signal Delay t dc 502001000nsOutput jitter 4)4)Jitter is the unpredictable deviation of the output switching delay t QJ –1–μs RMS Typ. value for square wave signal 1 kHz Repeatability of magnetic thresholds5)5)B REP is equivalent to the noise constantB REP–40–μT RMS Typ. value for ΔB /Δt > 12 mT/ms Power-on time 6)6)Time from applying V DD ≥ 2.7 V to the sensor until the output state is valid t PON –13–μs V DD ≥ 2.7 VDistance of hall plates d HALL – 1.45–mm Thermal resistance 7)7)Thermal resistance from junction to ambientCalculation of the ambient temperature (PG-TSOP6-6-5 example)e.g. for V DD = 12.0 V, I DDtyp = 5.5 mA, V QSATtyp = 0.3 V and 2 x I Q = 10 mA : Power Dissipation: P DIS = 72.0 mW.In T A = T j – (R thJA × P DIS ) = 175°C – (100 K / W × 0.072 W) Resulting max. ambient temperature: T A = 167.8°CR thJA–100–K/WPG-TSOP6-6-5Timing Diagrams for the Speed OutputsNote:Typical characteristics specify mean values expected over the production spread.Field Direction DefinitionPositive magnetic fields related with south pole of the magnet to the branded side of package.6Timing Diagrams for the Speed OutputsTable 6Magnetic Characteristics 1).1)over operating range, unless otherwise specified. Typical values correspond to V DD = 12 VParameterSymbolT j[°C]Limit Values Unit Conditionsmin.typ.max.Operate pointB OP1, B OP2-40 25 150 5.2 5.0 4.77.7 7.5 7.110.3 10.0 9.5mTB OP1 for Hall element 1 B OP2 for Hall element 2Release pointB RP1, B RP2-40 25 150-10.3 -10.0 -9.5-7.7 -7.5 -7.1-5.2 -5.0 -4.7mTB RP1 for Hall element 1 B RP2 for Hall element 2HysteresisB HYS1, B HYS2-40 25 150– 10.0 –– 15.0 –– 20.0 –mTB HYS1 = B OP1 - B RP1 B HYS2 = B OP2 - B RP2Magnetic matchingB MATCH-40 25 150– -2.0 –– 0 –– 2.0 –mTValid forB OP1 - B OP2 and B RP1 - B RP2Magnetic offsetB OFF1, B OFF2-40 25 150– -2.0 –– 0 –– 2.0 –mTB OFF1 = (B OP1 + B RP1)/2 B OFF2 = (B OP2 + B RP2)/2Temperaturecompensation of magnetic thresholdsTC ––-350–ppm/°C7Package Information7.1Package MarkingFigure 5Marking PG-TSOP6-6-57.2Distance between Chip and Package SurfaceFigure 6Distance Chip to Upper Side of IC7.3Package OutlinesPCB Footprint for PG-TSOP6-6-5Figure 8Footprint PG-TSOP6-6-5You can find all of our packages, sorts of packing and others in ourInfineon Internet Page “Products”: /products.Dimensions in mmw w w.i n f i n e o n.c o mMouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:I nfineon:TLE4966-2K。

霍尔传感器样本手册——安科瑞华楠

1.霍尔传感器霍尔电流传感器主要适用于交流、直流、脉冲等复杂信号的隔离转换，通过霍尔效应原理使变换后的信号能够直接被AD 、DSP 、PLC 、二次仪表等各种采集装置直接采集，广泛应用于电流监控及电池应用、逆变电源及太阳能电源管理系统、直流屏及直流马达驱动、电镀、焊接应用、变频器，UPS 伺服控制等系统电流信号采集和反馈控制，具有响应时间快，电流测量范围宽精度高，过载能力强，线性好，抗干扰能力强等优点。

1.1开环霍尔电流传感器1.1.1型号说明1.1.2技术指标技术参数指标霍尔开口式/闭口式开环霍尔（真有效值）输出标称值电压：±5V/±4V 电流：4～20mA 零点失调电压（电流）电压：±20mV电流：±0.05mA失调电压（电流）漂移电压：≤±1.0mV/℃电流：±0.04mA/℃线性度≤0.2%FS电源电压DC ±15V DC 24V频宽0～20kHz 响应时间≤5us≤1ms耐压强度输入与输出及电源之间允许AC2500V 工频耐压精度等级1.0环境温度工作：-25℃～+70℃；储存：-40℃～+85℃湿度≤95%RH，不结露，无腐蚀性气体场所海拔≤3500m注：开口式、闭口式为传感器产品外观不同，原理都为开环原理。

1.1.3开口式开环霍尔电流传感器1.1.3.1规格尺寸(单位：mm)图1图21.1.3.2规格参数对照表型号额定电流供电电源额定输出测量孔径(mm)准确度AHKC-EKA 0～(50-500)A ±15V 5V /4V φ201级AHKC-EKAADC 0～(50-500)A12V/24V4～20mAφ201级尺寸规格外形尺寸穿孔尺寸安装尺寸图形W H D a e ΦM N AHKC-EKA 606416//2047/图1AHKC-EKAA 606416//2047/图1AHKC-EKDA 606416//2047/图1AHKC-EKB 10010224//4080/图1AHKC-EKBA 10010224//4080/图1AHKC-EKBDA 10010224//4080/图1AHKC-EKC 11511027//6095.5/图1AHKC-EKCA 11511027//6095.5/图1AHKC-EKCDA 11511027//6095.5/图1AHKC-K 12763256416//30图2AHKC-KAA 12763256416//30图2AHKC-KDA 12763256416//30图2AHKC-H 14979258232//46图2AHKC-KA 17695.52910436//60图2AHKC-HB 204111.52913252//48×2图2AHKC-HBAA 204111.52913252//48×2图2AHKC-HBDA204111.52913252//48×2图2AHKC-EKDA AC 0～(50-500)A 12V/24V 4～20mA φ201级AHKC-EKB 0～(200-1000)A±15V 5V /4V φ401级AHKC-EKBADC 0～(200-1000)A 12V/24V4～20mAφ401级AHKC-EKBDA AC 0～(200～1000)A 12V/24V 4～20mA φ401级AHKC-EKC 0～(500-1500)A±15V 5V /4V φ551级AHKC-EKCADC 0～(500-1500)A 12V/24V4～20mAφ551级AHKC-EKCDA AC 0～(500-1500)A 12V/24V 4～20mA φ551级AHKC-K 0～(400-2000)A±15V 5V /4V 64×161级AHKC-KAA DC 0～(400-2000)A 12V/24V4～20mA64×161级AHKC-KDAAC 0～(400-2000)A12V/24V 4～20mA 64×161级AHKC-H 0～(500-3000)A ±15V 5V /4V 82×321级AHKC-KA 0～(500-5000)A±15V 5V /4V 104×361级AHKC-HB0～(2000-20000)A±15V5V /4V132×521级AHKC-HBAA DC 0～(2000-20000)A12V/24V 4～20mA 132×521级AHKC-HBDA AC 0～(2000-20000)A12V/24V 4～20mA 132×521级注:额定电流未标注表示输入电流交直流均可测量，订货时请注明。

FFPF10UP60S中文资料

FFPF10UP60STO-220F-2L1 2FFPF10UP60SFFPF10UP60STRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status DefinitionAdvance InformationFormative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.PreliminaryFirst ProductionThis datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.No Identification Needed Full ProductionThis datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.Obsolete Not In ProductionThis datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.FAST ®FASTr™FPS™FRFET™GlobalOptoisolator™GTO™HiSeC™I 2C™i-Lo ™ImpliedDisconnect™ISOPLANAR™LittleFET™MICROCOUPLER™MicroFET™MicroPak™MICROWIRE™MSX™MSXPro™OCX™OCXPro™OPTOLOGIC ®OPTOPLANAR™PACMAN™POP™Power247™PowerSaver™PowerTrench ®QFET™QS™QT Optoelectronics™Quiet Series™RapidConfigure™RapidConnect™µSerDes™SILENT SWITCHER ®SMART START™SPM™Stealth™SuperFET™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic ®TINYOPTO™TruTranslation™UHC™UltraFET ®VCX™ACEx™ActiveArray™Bottomless™CoolFET™CROSSVOLT ™DOME™EcoSPARK™E 2CMOS™EnSigna™FACT™FACT Quiet series™Across the board. Around the world.™The Power Franchise ®Programmable Active Droop™。

青岛伊莱克斯投币洗衣机技术参数

青岛伊莱克斯投币洗衣机-技术参数◆技术要求型号：XQB58-161额定洗涤、脱水容量：5.8kg额定电源：220V～50Hz额定输入功率：330W进水水压：0.03MPa～0.6MPa外形尺寸：570×570×950(mm)◆执行标准：GB/T 4288-2003、GB 4706.1-1998 GB 4706.24-2000、GB 4706.26-2000 GB 4343.1-2003、GB 17625.1-2003 GB 19606-2004◆颜色：◇外形颜色：瓷白◇门盖颜色：蓝色透明。

◆主要功能◇不锈钢内桶；◇静音设计；◇故障自诊断；◇运动浸泡；◇防鼠设计；◇自动断电；◇增强全塑箱体；◇超宽瀑布；◇适用毛毯、床单的强水流；◇适用轻柔衣物的弱水流；◇空气阻尼减振系统；◇数码显示。

◆产品认证C认证证书编号：2003010705103085注：以上参数若有不同以实物为准。

智能洗衣,感受科技魅力善解人意,生活变得如此简单1，双向手搓：筒与双向旋转，真正的手搓不流，深层洗涤，洗衣更干净。

2，健康杀菌：杀菌率达到99%，给家人以最好的关爱，健康杀菌，我的放心选择。

3，零水压启动：即便是超低水压的状态下，洗衣机也能正常使用。

4，智能烘干：即便阴雨天气，也没衣服晾不干的烦恼，烘干衣物，轻松制定。

5，喷淋雾态洗：洗涤水穿透衣物，洁净更节能，护衣更省心衣物更洁净，焕然衣新。

6，加热暖水洗：暖水立体护洗，洗衣加倍省心，同时确保均衡洗涤，洁净更全面。

加热暖水洗真正人性科技、暖水立体护洗，26-40度黄金水温，洗净效果提升50%细致烘干，呵护恰到好处，再也不用怕阴雨天气智能烘干一体化即使阴雨天气，也没衣服晾不干的烦恼独有的热烘干技术，空气被加热，形成强劲的热气流，高温气流穿透衣物分解气味粒子并杀灭深藏于衣物的有害生物，同时使衣物内隐藏的水分蒸发成水蒸汽，以达到烘干衣物的效果。

最新推出独家钛镜面板设计时尚潮流我也赶上了豪华钛镜让生活更炫彩整体印花钢化玻璃面板设计，大圆弧造型浑然一体，引领洗衣机产品发展潮流。

欧瑞(惠丰)E1000变频器说明书

5 种辅助频率。可灵活实现辅助频率微调、频率合成
选配件内置 RFI 滤波器、内置制动单元、MODBUS 通讯、带电位器本地控制面板、远控面板
条形码
图 1-1 产品铭牌
E1000 系列变频器外观结构为塑壳，采用壁挂式安装结构。塑料外壳采用优质材料模压而成，体积小巧，造型美观且强度高、韧性好。
以 E1000-0007S2 为例，产品外形及结构部件如图所示。
控制盒通风栅控制端子功率端子
安装孔散热器
1
产品简介
1.3 产品命名规则
E1000 - 0007 S2 F1 K B P R
操作面板类型不带电位器本地控制面板
带电位器本地控制面板
标识空 F1
现场总线类型无通讯功能带 MODBUS 通讯功能
标识 S2 T3
输入电压等级单相 220V 三相 380V
适配电机功率
对应关系
标识
0004
电机功率（kw） 0.4
0007 0.75
0015 1.5
…… ……
产品系列代号
2
产品简介
点动频率范围：下限频率～上限频率；点动加减速时间：
0.1～3000.0 秒
通过自动循环或控制端子实现最多 15 段速运行
可方便实现过程闭环控制系统
电位器或外部模拟信号（0～5V，0～10V，0～20mA）；键盘（端子）▲／▼键、外部控制逻辑及自循环设定。
无源触点控制、键盘控制、通讯控制三种通道：操作面板给定、控制端子给定、串行通讯口给定。主频率源：数字给定、模拟电压给定、模拟电流给定、串行口给定等。
三相 0～380V；三相 0～220V
0.00～650.0Hz

TPF100温压流一体化变送器用户手册

F O C U S E D P H O T O N I C S I N CTPF-100温压流一体化变送器用户手册Focused Photonics Inc、聚光科技 (杭州) 有限公司UMTPF1000707100目录1阅读说明 (1)1、1用户须知 (1)1、2安全与警告 (1)1、3供货与运输 (1)1、4质保与维修 (1)1、5技术支持 (2)2仪器介绍 (2)2、1仪器概述 (2)2、2测量原理 (2)2、3仪器内部结构 (4)2、3、1取压取温单元 (4)2、3、2机箱单元 (4)2、4仪器工作流程 (5)2、5适用范围 (6)2、6性能参数 (6)3现场安装 (7)3、1安装位置 (7)3、2输出方式及阻抗匹配 (7)3、3仪器接线 (7)3、3、1差压变送器接线 (7)3、3、2压力变送器接线 (8)3、3、3温度变送器接线 (8)4仪器调试 (9)5故障处理 (10)6注意事项 (11)6、1 暂存保管 (11)6、2 开箱验货 (11)6、3售后服务 (11)1阅读说明欢迎选用聚光科技(杭州)有限公司TPF-100温压流一体化变送器(以下简称:TPF-100),TPF-100的主要功能就是监测烟气中的温度、压力、流速并将其转换成相应的比例电流(4-20)mA传送给工控机进行数据处理。

1、1用户须知●在TPF-100安装与维护之前请务必仔细阅读本手册,本手册涵盖仪器使用的各项重要信息及数据,用户必须严格遵守其规定,方可保证TPF-100的正常运行。

●针对任何不按照手册要求安装与操作仪器的行为后果,聚光科技(杭州)有限公司不负任何责任。

●如果TPF-100温压流一体化变送器有更改恕不另行通知。

●版权归聚光科技(杭州)有限公司所有,未经允许,不得翻印。

1、2安全与警告●任何情况下不规范的操作都可能引起人员及仪器的伤害,请遵守所有电器及设备的安全规范。

●在维修﹑拆卸电器元件前请确认电源已经断开。

艾特顿模50插座双路滤篮的中文名字说明书

T rouble-free design, easy operationThe Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets.To switch the flow from one basket to the other, the oper-ating handle moves through a 90-degree arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no toolsrequired. Positioning the plug each time in exactly the right spot happens automatically by integral stops.Before operating the handle, a specially designed, manual lifting jack built into thestrainer, lifts the diverter plugoff its seat. After theswitching operation, the jack easily reseats the plug, even under high pressures.Because a built-in stop limits the distance the diverter plug rises, it minimizes the possi-bility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it diffi-cult to reseat.Other features• A quick, easy to open, swing-away yoke design cover goes back on just as fast as it came off • Standard NPT drain taps simplify the draining of the basket chamber • All sizes come withmounting legs for bolting the strainer to the floor for a rock solid installationFeatures• Continuous flow, no shutdown for basket cleaning • Rugged tapered plug design • Lift jack prevents galling of the plug • Quick open cover—no tools needed • Large capacity baskets • Threaded drain • Machined basket seat• Perforated or mesh 316 stainless steel basketOptions• Ductile iron construction• Basket perforations from 1/32" to 1/2"• Basket mesh from 20 to 400• MONEL ® baskets • Vent valves • Drain valves• Gauge/vent taps - 1/4" NPT • Magnetic basket inserts• Pressure differential gauge and switch connections • Viton ®, PTFE encapsulated or EPDM seals • Cast iron and stainless steel diverter plug• Sizes 5", 6", 8"• I ron, bronze, carbon steel or stainless steel• FlangedMONEL ® is a registered trademark of Special Metals Corporation group of Companies. Viton ® is a registered trademark of The Chemours Company FC, LLC.C a s t C o n s t r u c t i o nP e r m a n e M e d i aPlug T ype Duplex Basket StrainerSelection chart 5", 6", 8" Iron Bronze Flanged 125# Buna-N ®Flow rate (water) [GPM]P r e s s u r e d r o p [k P a ]5"Bronze 457229********* 8451,04110437132481876"Carbon steel 559327298502470 8891,0671052716318263Stainless steel 559327298502470 8891,0671052716318279Cast iron 559327298502495 9211,0671052716318227Bronze 546273298502384 8701,06710540162862648"Carbon steel 635356–711570 1,2701,4221578122432730Stainless steel 635356–711570 1,2701,4221578122432757Cast iron 635356–711586 1,2861,4221578124432682Bronze635356–7115861,2861,4221578124432782For more information, please email us at ********************or visit /filtration© 2023 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.North America 44 Apple StreetTinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700Europe/Africa/Middle East Auf der Heide 253947 Nettersheim, Germany Tel: +49 2486 809-0Friedensstraße 4168804 Altlußheim, Germany Tel: +49 6205 2094-0An den Nahewiesen 2455450 Langenlonsheim, Germany Tel: +49 6704 204-0Greater China No. 7, Lane 280, Linhong RoadChangning District, 200335 Shanghai, P .R. China Tel: +86 21 2899-3687Asia-Pacific100G Pasir Panjang Road #07-08 Interlocal Centre Singapore 118523Tel: +65 6825-1620ENEF -SSEA-1210-2023Partial cutaway of Model 50 duplex strainer clearly illustrates all major parts—and gives a clear indication of the simplicity of design and ease of maintenance.plugJack。

F1000-G 系列变频器说明书

目录一、产品简介 (1)1.1产品铭牌 (1)1.2产品型号说明 (1)1.3产品外观 (2)1.4技术规范 (3)1.5产品设计执行标准 (3)1.6注意事项 (4)二、操作面板 (5)2.1面板说明 (5)2.2面板操作 (6)2.3参数设置 (6)2.4功能码区内与区间的切换 (7)2.5面板显示内容 (8)三安装接线 (9)3.1 变频器安装 (9)3.2 接线 (9)3.3 推荐配线 (12)3.4 保护导体（地线）的截面积 (12)3.5 总体接线与“三线制” (12)四、操作使用 (16)4.1频率设置方式 (16)4.2运行命令控制方式 (16)4.3变频器的控制状态 (16)4.4控制面板及其操作方法 (16)4.5简单运转使用操作流程 (17)4.6基本操作举例 (19)4.7控制端子功能 (20)4.8拨码开关 (21)4.9操作运行方式简介 (23)五、基本参数 (25)六、运行控制 (29)6.1 参数设置 (29)6.2 基本调速方式 (33)七、段速控制 (35)7.1 参数设置 (35)7.2 多段速度调速及组合调速方式 (36)八、端子定义 (39)8.1 可定义输入端子 (39)8.2 可定义输出端子 (40)8.3 特殊输出端子 (41)九、V/F控制与保护 (41)9.1 V/F控制 (41)9.2 定时控制 (41)9.3 可设定保护功能 (42)十、模拟输入与频率输出 (49)附录1常见故障处理 (50)附录2功能码速查表 (52)附录3产品一览表及结构形式一览表 (60)附录4制动电阻选配 (63)Modbus通信 (64)敬告用户 (75)产品简介接地可靠，接地电阻不得超过4Ω；保证通风流畅；控制回路与功率回路分开走线；信号线采用屏蔽线。

功率范围：0.4～400KW；三种结构型式；通过ISO9001国际质量体系认证。

一、产品简介本使用手册简要介绍了F1000-G 系列变频器的安装接线、参数设定及操作使用的有关事项，务请妥善保管。

PES-F100智能保护测显装置说明书V2.0.0

普尔盾电气（上海）有限公司PES-F100智能保护测显装置技术及使用手册【适用于110kv及以下电压等级电网的保护、控制、测量和监视。

可用于不同的主接线方式，如单母线，双母线及多母线方式接线；支持不同类型的电网，如中性点不接地系统，经消弧线圈接地系统和小电阻接地系统。

】感谢您选用PES-F100系列智能保护测显装置。

我们建议在安装和使用PES-F100系列智能保护测显装置之前请仔细阅读本手册。

请将本手册妥善存放，以备您将来的使用。

订货前，请垂询本公司或当地经销商以获悉本产品的最新规格。

本手册当前版本V2.0.0目录1 概述 (1)1.1 适用范围 (1)1.2 逻辑可编程功能 (1)1.3 友好的人机交互 (1)1.4 高可靠性设计 (2)1.5 高精度测量 (2)1.6 全面的事故分析记录 (2)1.7 精准的校时 (2)1.8 实时数据打印功能 (2)1.9 强大灵活的通讯 (2)2 技术参数 (3)2.1 环境条件 (3)2.2 工作电源 (3)2.3 控制电源 (3)2.4 交流电流回路 (3)2.5 交流电压回路 (3)2.6 开关量输入回路 (3)2.7 继电器输出回路 (4)2.8 测量及计量精度 (4)2.9 绝缘性能 (4)2.10 电磁兼容性 (4)2.11 机械性能 (5)2.12 装置接口资源 (5)2.13 通讯功能详述 (5)3 保护原理 (5)3.1 过流一段保护 (5)3.2 过流二段保护 (6)3.3 定时限过流三段保护 (7)3.4 反时限过流三段保护 (8)3.5 保护选项：方向闭锁 (9)3.6 保护选项：零序方向闭锁 (10)3.7 过负荷保护 (10)3.8 合环保护 (11)3.9 合环零序保护 (11)3.10 零序电流保护 (12)3.11 PT断线报警 (12)3.12 线路抽取电压异常 (13)3.13 母线接地保护 (13)3.14 低压侧零序过流保护 (13)3.15 低电压保护 (14)3.16 重合闸保护 (14)3.17 重合闸后加速保护 (16)3.18 低频减载保护 (17)3.19 过电压保护 (18)3.20 过热保护 (19)3.21 负序电流保护 (20)3.22 逆功率保护 (20)3.23 失步保护 (21)3.24 三段式磁平衡保护 (21)3.25 启动时间过长保护 (22)3.26 充电保护 (23)3.27 不平衡电压保护 (23)3.28 不平衡电流保护 (24)3.29 间隙过流保护 (24)3.30 非电量保护 (25)3.31 故障录波 (25)4 整定说明 (25)4.1 保护功能投退控制字表 (25)4.1.1 线路保护投退控制字 (25)4.1.2 配电变保护投退控制字 (26)4.1.6 变压器后备保护投退控制字 (29)4.1.7 同步电动机保护投退控制字 (29)4.2 保护定值整定表 (30)4.2.1 线路保护定值整定表 (30)4.2.2 配电变保护定值整定表 (31)4.2.3 异步电动机保护定值整定表 (32)4.2.4 电容器保护定值表 (33)4.2.5 母联保护定值整定表 (34)4.2.6 变压器后备保护定值整定表 (34)4.2.7 同步电动机保护定值整定表 (35)4.3 监控参数定值表 (36)4.4 事故记录表（SOE） (36)4.4.1 线路保护SOE (36)4.4.2 配电变保护SOE (37)4.4.3 异步电动机保护SOE (37)4.4.4 电容器保护SOE (38)4.4.5 母联保护SOE (38)4.4.6 变压器后备保护SOE (38)4.4.7 同步电动机保护SOE (39)5 安装与接线 (39)5.1 安装 (39)5.2 接线 (40)5.2.1 高亮度LED指示灯 (40)5.2.2 “确认”按键 (41)5.2.3 “复归”按键 (41)5.2.4 “方向”按键.............................................................................................................. 错误！未定义书签。

FI-6800产品说明书

Appendixfi-6800 Technical SpecificationsProduct nameFI-6800 Supported operating systems Microsoft ® Windows ® 2000 Professional / Microsoft ® Windows ® XP(32 bit/64 bit) /Microsoft ® Windows Server ™ 2003 / 2008 (32 bit/64 bit) / Microsoft ® Windows Vista ™ (32 bit/64 bit)[VRS]Microsoft ® Windows ® 2000 Professional / Microsoft ® Windows ® XPProfessional (32 bit) / Microsoft ® Windows Vista™ Enterprise/Business (32bit/64bit)Scanner typeADF (Automatic Document Feeder)+Manual Feed Scanning modesSimplex / Duplex, Color / Grayscale / Monochrome Image sensor typeColor CCD (Charge-coupled device) x 2 (front x 1, back x 1) Light sourceWhite LED array Document sizeMaximum: A3 (297 x 420mm or 12 x 17in.) (long document scanning: 3048mm (120in.)) Minimum: A8 Portrait (52 x 74mm or 2 x 3in.) Paper weight (Thickness)Less than A5 size : 0.050 to 0.25mm (41 to 209 g/m 2, or 11 to 56 lb) A4 to A5 size : 0.025 to 0.25mm (20 to 209 g/m 2, or 5.4 to 56 lb) Over A4 : 0.050 to 0.25mm (41 to 209 g/m 2, or 11 to 56 lb) Color *2Grayscale *2Scanning speed (A4 Landscape) *1Monochrome Simplex : 130ppm (200, 300dpi), Duplex: 260ipm (200, 300dpi) (Duplex: 260ipm (200dpi), 250ipm (300dpi) *With CGA board) Color *2 Grayscale *2Scanningspeed (A4 Portrait) *1 MonochromeSimplex : 100ppm (200, 300dpi), Duplex: 200ipm (200, 300dpi) (Duplex: 200ipm (200,300dpi) *With CGA board) Paper chute capacity (A4 Landscape) *3500 sheets (A4: 80 g/m 2 or 21 lb) Expected daily volume60,000 sheets/day Background colorsWhite / Black (Selectable) Optical resolution600dpi Color (24 bit) Grayscale (8 bit) Outputresolution *4Monochrome (1 bit) 50 to 600dpi (adjustable by 1 dpi increments) (100 / 150 / 200 / 240 / 300 / 400dpi) *With CGA board Output format Color:24bit,8bit(8bit and 4bit with driver)Grayscale:8bit(4bit with driver) Monochrome:1bitAD converter 1024 levels (10 bit)Interface *5 *6 Ultra SCSI, USB2.0, With CGA board : Ultra Wide SCSI, USB2.0Connector shape Ultra SCSI : Shield type 50 pin (pin type) , USB: B typeWith CGA board : Ultra Wide SCSI : Shield type 68 pin(pin type),USB: B typeSCSI Terminator Built-inImage processing (half-tone) Dither / Error diffusionVoltage or voltage range AC 100 to 240V ±10%Power consumption Operating: 200W or less (Sleep mode: less than 4W *10)Operating environment Temperature: 15 to 35°C (59 to 95°F )Relative humidity: 20 to 80% (Non-condensing)Dimensions: Width x Depth x Height *7460 x 430 x 310mm (18.1 x 16.9 x 12.2in.)Installation space: 860 x 1630 x 350mm (33.8 x 64.1 x 13.7in.)Weight 32kgIncluded software / drivers TWAIN, ISIS™, ScandAll PRO, Adobe® Acrobat®, QuickScan™ ProDemo,Image processing software (Trial), Kofax® VRS Professional, Scan toMicrosoft SharePointEnvironmental compatibility *8 ENERGY STAR®, and RoHSMulti-feed detection Yes (Standard) ultrasonic multi-feed defection sensorOthersLong paperscanning *93048 mm (120in.)Included items AC cable, USB cable, Setup DVD-ROM, Adobe® Acrobat®DVD-ROM,QuickScan™ Pro brochure*1 Actual scanning speeds are affected by data transmission and software processing times.*2 JPEG compressed figures.*3 Maximum capacity varies, depending upon paper weight.*4 Maximum output resolutions may vary, depending upon the size of the area being scanned andwhether the scanner is scanning in simplex or duplex.*5 You cannot use both SCSI and USB 2.0 interfaces at the same time.*6 You cannot connect multiple computers to the scanner using each type of interface cables at the sametime.*7 Excluding the ADF hopper.*8 PFU Limited, a Fujitsu company, has determined that this product meets RoHS requirements(2005/95/EC).*9 Capable of scanning documents that exceed A3 size in length. For long page scanning with standardI/F: Documents that exceed 432mm (17in.) are limited to 400dpi for lengths up to 863mm (34in.). Documents between 863mm and 3,048mm (120in.) in length are limited to 300dpi. Multi-image documents up 432mm in length are limited to 400dpi. For long page scanning with VRS: Documentsthat exceed 432mm (17in.) are limited to 300dpi for lengths up to 1,778mm (70in.). Documentsbetween 1,778mm and 3,048mm (120in.) in length are limited to 200dpi. Documents that exceed432mm can be scanned under any resolution for lengths up to 1,016mm (70in.) when used with ISIS.*10 Without CGA board interface.■OptionsPost Imprinter(Front side)(FI-680PRF)PA03575-D201Post Imprinter(Back side) (FI-680PRB) PA03575-D203The imprinter option enables users to print information on original documentsfor document management purposes. While the FI-680PRF (post imprinter)prints information on the front of documents, the FI-680PRB (post imprinter)prints information on the reverse-side of documents after they have beenscanned. Although both the FI-680PRF and the FI-680PRB may be attachedto the same scanner unit, both imprinters cannot be used simultaneously.■ConsumablesPick Roller PA03575-K011Lifetime: Every 600,000 sheets or one year. These rollers feed documents into the scanner.Separator Roller PA03575-K012Lifetime: Every 600,000 sheets or one year.These rollers feed documents through the scanner.Brake Roller PA03575-K013Lifetime: Every 600,000 sheets or one year.These rollers separate documents as they are being fed into the scanner.Print Cartridge CA00050-0262 Lifetime: 4,000,000 charactersFI-680PRF and FI-680PRB print head。

Fremont Micro Devices FT60F01x 微控制器说明书

特性●全自我知识产权8位指令集●8层10bit硬件堆栈●1Kx14b程序FLASH存储空间（16bytes/page）●256x8b数据EEPROM（16bytes/page）●数据EEPROM可在应用编程●64x8b SRAM● 1 x带8位预分频的定时器0● 1 x带8位预分频的定时器2●带7位预分频的WDT，溢出频率约为16-2048ms●上电延迟计数器PWRT●低功耗模式SLEEP●4个唤醒源，INT、端口变化中断、WDT、数据EEPROM写完成●内置高速RC振荡器，最高频率支持16M●内置低速RC振荡器，32K模式●最多6个通用IO●端口变化中断，PA0-PA5●支持在系统编程ISP●支持在线调试●程序空间保护●工作电压范围：2.0V - 5.5V●最大时钟工作频率：16MHz✧F SYS=8MHz: 2.0V - 5.5V✧F SYS=16MHz: 2.7V - 5.5VRev1.20２０２０－３－１６目录特性 (1)芯片版本历史 (5)1.数字功能框图和程序存储器、脚位图 (6)1.1.数字功能框图 (6)1.2.程序存储器 (6)1.3.脚位图 (7)2.SFR (8)2.1.地址映射 (8)2.1.1. SFR，BANK0 (8)2.1.2. SFR，BANK1 (9)2.1.3. TMR0，地址0x01 (10)2.1.4. STATUS寄存器，地址0x03，0x83 (10)2.1.5. PORTA寄存器，地址0x05 (11)2.1.6. INTCON寄存器，地址0x0B，0x8B (11)2.1.7. PIR1寄存器，地址0x0C (12)2.1.8. TMR2，地址0x11 (13)2.1.9. T2CON寄存器，地址0x12 (13)2.1.10. WDTCON寄存器，地址0x18 (14)2.1.11. MSCKCON寄存器，地址0x1B (14)2.1.12. SOSCPR寄存器，地址0x1C，1D (15)2.1.13. OPTION寄存器，地址0x81 (16)2.1.14. TRISA寄存器，地址0x85 (16)2.1.15. PIE1寄存器，地址0x8C (17)2.1.16. OSCCON寄存器，地址0x8F (17)2.1.17. PR2寄存器，地址0x92 (18)2.1.18. WPUA寄存器，地址0x95 (18)2.1.19. IOCA寄存器，地址0x96 (18)2.1.20. PCON寄存器，地址0x8E (19)2.1.21 EEDAT寄存器，地址0x9A (19)2.1.22 EEADR寄存器，地址0x9B (19)2.1.23. EECON1寄存器，地址0x9C (19)2.1.24. EECON2寄存器，地址0x9D (20)2.1.25. UCFG0/UCFG1/UCFG2 (20)2.1.26. PCL和PCLATH (22)2.1.27. INDF和FSR寄存器 (22)3.系统时钟源 (23)4.复位时序 (23)4.1.POR上电复位 (24)4.2.外部复位MCLR (24)4.4.BOR低电压复位 (25)4.5.超时动作 (26)4.6.关于WDT复位 (27)5.BOOT (28)6.烧录和控制串口 (28)7.看门狗定时器 (29)7.1.看门狗 (29)8.定时器0 (30)8.1.T IMER 0 (30)8.2.T IMER 0定时器模式 (30)8.3.T IMER 0计数器模式 (30)8.3.1. 软件可配置预分频电路 (31)8.3.2. 定时器0中断 (31)8.3.3. 用外部时钟驱动定时器0 (32)9.定时器2 (32)9.1.T IMER2 (32)10.数据EEPROM (33)10.1.编程数据EEPROM步骤 (33)10.2.关于编程周期 (33)10.3.读EEPROM步骤 (34)11.慢时钟测量模式 (34)12.中断模式 (35)12.1.中断过程中的现场保存 (36)13.睡眠省电模式 (37)13.1.唤醒模式 (37)13.2.看门狗唤醒 (37)14.I/O端口 (38)14.1.PORTA端口和TRISA寄存器 (38)14.2.端口的其他功能 (38)14.2.1. 弱上拉 (38)14.2.2. 状态变化中断 (38)14.2.3. 端口描述 (39)15.芯片的电气特性 (45)15.1.绝对极限参数 (45)15.2.内置高频振荡器(I NTERNAL H IGH F REQUENCY O SC) (45)15.3.内置低频振荡器(I NTERNAL L OW F REQUENCY O SCILLATOR) (45)15.5.I/O PAD电路 (46)15.6.总体工作电流(I VDD) (46)15.7.AC电气特性 (47)15.8.时序图 (47)15.9.直流和交流特性图表 (48)16.MCU的指令架构 (52)16.1.指令集列表 (52)17.封装信息 (54)17.1封装标识信息 (54)17.2详细封装 (54)18.包装方式 (57)18.1编带尺寸 (57)18.1.1SOP-8 (57)18.1.2SOT23-6 (58)附录1，文档版本历史 (60)芯片版本历史1. 数字功能框图和程序存储器、脚位图1.1. 数字功能框图图1.1 数字功能框图1.2. 程序存储器地址寄存器为13位 (0x0000 ~ 0x1FFF)，最多支持8K 地址空间。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Features• Industry Standard Size • Industry Standard Pinout7.62 mm (0.300 inch) DIP Leads on 2.54 mm (0.100 inch) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red,Yellow, Green• Excellent Appearance Evenly Lighted Segments ±50° Viewing AngleOptimum Contrast Given byGray Top Surface for AlGaAs Red and Green DevicesRed Top Surface for HER Devices Yellow Top Surface for Yellow Devices• Design Flexibility Common Anode or Common Cathode Single DigitsLeft or Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing• Intensity and Color Selection AvailableSee Intensity and Color Selected Displays Data Sheet• Sunlight Viewable AlGaAsAlGaAs [1]HER [1]Yellow Green Package Red HDSP-5082-5082-HDSP-DescriptionDrawing7610762036007.6 mm Common Anode Left Hand Decimal A 7611762136017.6 mm Common Anode Right Hand Decimal B 7613762336037.6 mm Common Cathode Right Hand Decimal C 7616762636067.6 mm Universal ±1. Overflow Right Hand Decimal [2]D E15076507660460010.9 mm Common Anode Left Hand Decimal E E15176517661460110.9 mm Common Anode Right Hand Decimal F E15376537663460310.9 mm Common Cathode Right Hand Decimal G E15676567666460610.9 mm Universal ±1. Overflow Right Hand Decimal [2]HNotes:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation.2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.Devices5082-761x Series 5082-762x Series 5082-765x Series 5082-766x Series HDSP-360x Series HDSP-460x Series HDSP-E15x Series7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays Technical DataDescriptionThe 7.6 mm (0.3 inch) and 10.9mm (0.43 inch) LED sevensegment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet).These devices use an industry standard size package andpinouts. All devices are available as either common anode or common cathode.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation4: Color Bin 4 Only (applicable for Green devices only)B: Color Bins 2 and 3 (applicable for Yellow devices only)Maximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]0: Common Anode1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa-tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.NOTES;1. DIMENSIONS IN MILLIMETRES AND (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. UNUSED DP POSITION.5. SEE INTERNALCIRCUIT DIAGRAM.6. REDUNDANT CATHODE.7. SEE PART NUMBER TABLE FOR L.H.D.P.AND R.H.D.P.DESIGNATION.8. FOR YELLOW AND GREEN DEVICES ONLY.Package DimensionsThese displays are ideal for most applications. Pin for pin equiva-lent displays are also available in a low current or high lightambient design. The low currentInternal Circuit DiagramAbsolute Maximum RatingsAlGaAs Red HER Yellow GreenHDSP-E1505082-7610/5082-7620/HDSP-3600/ Description Series7650 Series7660 Series4600 Series Units Average Power per Segment or DP9610580105mW Peak Forward Current per160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per40[2]30[4]20[6]30[8]mA Segment or DPOperating Temperature Range-20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for3 Seconds (1.59 mm [0.063 in.] 250°Cbelow Body)Notes:1.See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V8.515.0mcd I F = 20 mA(Digit Average)1.8V I F = 20 mAForward Voltage/Segment or DP V F2.03.0V I F = 100 mAHDSP-E15x Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN340°C/W/Segto-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions 5082-761x Luminous Intensity/Segment[1,2,6]340800µcd I F = 5 mA (Digit Average)I V5082-765x3401115µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nm AllReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN280°C/WJunction-to-PinDevice Series ParameterSymbol Min.Typ.Max.Units Test Conditions 5082-762x Luminous Intensity/Segment [1,2]205620µcdI F = 5 mA(Digit Average)I V5082-766x290835µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mAPeak WavelengthλPEAK 583nm Dominant Wavelength [3,7]λd 581.5586592.5nm AllReverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ-PIN280°C/W/SegJunction-to-PinYellowNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series.6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series.7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.High Performance GreenDevice Test Series ParameterSymbol Min.Typ.Max.Units Conditions HDSP-360x Luminous Intensity/Segment [1,2]8602700µcdI F = 10 mA(Digit Average)I VHDSP-460x10304000µcd I F = 10 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mAPeak WavelengthλPEAK 566nm Dominant Wavelength [3,7]λd 571577nm AllReverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ -PIN280°C/W/SegJunction-to-PinFigure 3. Forward Current vs. Forward Voltage.Figure 2. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.AlGaAs RedFigure 1. Maximum Allowed Peak Current vs. Pulse Duration – AlGaAs Red.I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )0I F – FORWARD CURRENT PER SEGMENT – mA2.001.501.250.750.2520401.751.000.5010305152535ηP E A K – N O R M A L I Z E D R E L A T I V E EF F I C I E N C Y0.5I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA50.0150.05.0HER, Yellow, GreenFigure 6. Maximum Tolerable Peak Current vs.Pulse Duration – HER Series.Figure 7. Maximum Tolerable Peak Current vs.Pulse Duration – Yellow Series.Figure 8. Allowable Peak Current vs.Pulse Duration – Green Series.Figure 9. Maximum Allowable DC Current vs.Ambient Temperature.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 10. Forward Current vs.Forward Voltage.Figure 12. Relative LuminousEfficiency (Luminous Intensity per Unit Current) vs. Peak Current.HDSP-E15x IV Bin Category Min.Max.L 8.6715.90M 13.0023.80N 19.5035.80O 29.3053.60P 43.9080.50Intensity Bin Limits (mcd)AlGaAs RedHER5082-761x IV Bin Category Min.Max.B 0.3690.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.1775082-765xIV Bin Category Min.Max.B 0.3470.593C 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751Yellow5082-762x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.413 4.4255082-766xIV Bin Category Min.Max.C 0.2970.543D 0.4450.817E 0.669 1.225F 1.003 1.838G 1.504 2.758H 2.2564.137HDSP-460xIV Bin Category Min.Max.G 1.03 1.88H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26GreenHDSP-360x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningFor information on solderingLEDs, please refer to ApplicationNote 1027.元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5963-7394EJuly 17, 20045988-3325EN。