TD161规格书

合集下载

NSC161 技术说明书

NSC 161系列数字式线路保护装置技术说明书南京电力自动化设备总厂2005年6月*本说明书可能会被修改,请注意最新版本资料目次1 装置简介 (1)2 技术参数 (3)2.1额定参数 (3)2.2主要技术性能 (4)2.3绝缘性能 (5)2.4电磁兼容性能 (5)2.5机械性能 (6)2.6正常工作大气条件 (6)3 装置硬件 (7)3.1机箱结构 (7)3.2主要模件设计 (7)4 NSC 161线路保护装置 (13)4.1启动元件 (13)4.2选相元件 (13)4.3距离保护 (14)4.4零序保护 (21)4.5重合闸继电器 (22)4.6失灵启动 (25)4.7合闸加速保护 (25)4.8PT断线 (26)4.9CT异常判别 (27)4.10低周减载、低压减载 (27)4.11电流保护 (29)4.12NSC161保护定值 (29)5 NSC 161D线路保护装置 (34)6 NSC 161G线路保护装置 (41)7 信息记录和分析 (45)8 与变电站自动化系统配合 (46)9 用户调试大纲 (46)9.1装置通电前检查 (46)9.2绝缘检查 (46)9.3电压切换试验 (46)9.4上电检查 (47)9.5采样精度检查 (47)9.6接点输出校验 (47)9.7定值校验 (47)9.8跳合闸电流保持试验 (47)9.9相序检查 (48)9.10校准时钟 (48)11 事件信息一览表 (49)12 附图 (51)1 装置简介NSC 161系列数字式线路保护装置以距离保护、零序保护和三相一次重合闸为基本配置的成套线路保护装置，并集成了电压切换箱和三相操作箱，适用于110kV、66kV或35kV输配电线路。

本保护装置基本配置（NSC161）设有两个硬件完全相同的保护CPU模件，其中一个保护CPU完成距离保护和电流保护功能，另一个保护CPU完成零序电流保护和三相一次重合闸功能，各CPU插件之间相互独立。

Optoma HD161X投影机产品设置表说明书

PRODUCT SET-UP SHEETLAUNCH DATEBRAND OptomaDESCRIPTIONOptoma HD161X Full 3D 1080p ProjectorREGULATORY NUMBERVDHDUZ SUPPLIER EAN NUMBER 5055387600195PART NUMBER E1P0D0R110Z1MODEL NO.HD161XMRSP WARRANTYSpecificationATTRIBUTEFACT Display Technology - DLP DLP® Resolution 1080p Brightness 2000Contrast 40,000:1Lamp Life 7000/5000/3500Throw Ratio 1.39 - 2.09:1Lens Zoom 1.5x Manual Lens Shift (Manual)Vertical: +15%Projection Distance 1.2 – 10mProjected Image Size 0.76 - 7.67m (30" - 300") Diagonal 16:9Built in Speaker N/A Noise Level 29Keystone Correction ±40° VerticalPower Consumption 270W BRIGHT mode < 0.5W Standby mode 230W Eco mode < 0.5W Standby modePower Supply100 - 240V, 50 - 60Hz2D Compatibility NTSC M/J, 3.58MHz, 4.43MHz PAL B/D/G/H/I/M/N, 4,43MHzSECAM B/D/G/K/K1/L, 4.25/4.4MHz480i/p, 576i/p, 720p(50/60Hz), 1080i(50/60Hz), 1080p(50/60Hz)Full 3D 3D SupportSide-by-Side: 1080i50 / 60, 720p50 / 60Frame-pack: 1080p24, 720p50 / 60Over-Under: 1080p24, 720p50 / 603D ViewingRequires ZF2100 System - Sold separately (Additional Glasses are also available)(ZD301 DLP-Link 3D active glasses are also supported)2D to 3D Conversion InputsHDMI v1.4a 3D 2VGA Yes Component Yes Composite Video Yes Output 3D-SyncYes USB Power (1.2A)Yes 12V Trigger Yes Control RS232Yes USB ServiceYes HD161X Dimensions Width 286Depth 266Height 124Weight3,8HD161X Boxed Dimensions Width 37,5Depth 20,8Height 39,2Weight 5,1Featuresmm kgPixelANSI Lumens (BRIGHT mode)Watt mm HDMI connector mm 3.5mm Jack Metre / inch (Diagonal)mm mm PROJECTORSuper-sized home cinemaCreated for movie-lovers, the HD161X brings digital cinema quality images into the comfort of your home. Packed with features, you can experience your favourite films,UNIT OF MEASUREMENTPROJECTOR SPECIFICATIONUSB Type BUSB Type A RCA3 Pin Mini Din (VESA)Hours (Dynamic/Eco/Bright mode)Volts15 Pin D-Sub Metrekg 9 Pin D9dB Watt via adaptor Degrees mmCreated for movie-lovers, the HD161X brings digital cinema quality images into the comfort of your home. Packed with features, you can experience your favourite films, TV shows and sporting events in vivid clarity with pure, deep colours and high contrast thanks to deeper blacks and crisp whites.Using advanced processing, the HD161X eliminates motion blurring or image judder, even in high-speed action packed movies and sport.Vertical Lens shiftSimplify installation with vertical lens shift, which provides a wider range of projector placement possibilities. This makes it easier to position the projector in your room and enables a wider range of screen size options.PureMotionUsing sophisticated frame-interpolation technology, advanced motion control processing eliminates motion blurring or image judder, even in high-speed action sequences.UltraDetailThis technology ensures all the information contained in an image is faithfully reproduced on the screen giving a stunning crystal clear, pin-sharp picture.PureColourThis mode makes it possible for the projector to reproduce more detailed shades of colour; to provide vivid, balanced colour for vibrant, natural looking images.Colour Management System (CMS)Display accurate life-like colours to best match your viewing environment. This unique feature provides you with the flexibility to fine-tune the colour settings to the Rec. 709 standard for optimal precision.2D-3D ConversionSee more in 3D with the built in 2D to 3D converter. This means live sport, TV and movies can be enjoyed in stunning 3D making you feel part of the action.Full HD 1080p1080p resolution gives you sharp and detailed images from HD content without downscaling or compression; perfect for watching Blu-ray movies, HD broadcasting and playing video games.Full 3DOptoma projectors can display true 3D content from almost any 3D source, including 3D Blu-ray players, 3D broadcasting and the latest generation games consoles. Support for 144Hz rapid refresh rate provides ultra-smooth flicker free images.Dynamic BlackThis feature gives more depth to your image by smoothly adjusting the lamp output, based on the brightness information of each frame; to create a stunning high contrast ratio. Bright scenes appear crisp and clear, while dark scenes remain detailed with deep blacks and exceptional light and shade detail.Gaming ModeGaming Mode optimises your projector for lightning response times, maximum contrast and vivid colours to capture every detail - leaving you time to focus on winning.24pMost movies are shot at 24 frames per second (fps). To preserve the purity of the original image, Optoma projectors can accept high definition sources at 24 fps to display movies exactly as the director intended.Color GuaranteeEnjoy dazzling colours for years to come; guaranteed by Optoma for five years’ consistent performance.Integrated SpeakerComplete your home entertainment experience with the convenience of a powerful built-in speaker. Built-in speakers provide exceptional sound quality and are easy to set up without the need for costly external speakers.Long Lamp LifeThe expected lifetime of a typical Optoma projector lamp is an impressive 7000 hours; so if you watch a two hour movie every day, the lamp should last for almost 9.5 years.WirelessStream Full 1080p 3D content to your projector wirelessly; eliminating the hassle and extra cost of installing long cables, the WHD200 (sold separately) allows you to connect a Blu-ray™ player, set-top box, gaming console or AV receiver instantly.USB-PowerUse the USB-Power to power an HDMI dongle, such as Google Chromecast or the Optoma WHD200 wireless HDMI device.Power cord Quick Start GuideRemote inc. Batteries Warranty CardLens cap WEEE CardUniversal Ceiling Mount ZF2100 SystemOptoma Projection Screen ZF2100 GlassesZD301 DLP-Link 3D active glassesCE Report13B0363R-ITCEP01V00CB ReportE134786-A101-CB-1FCC Report13B0363R-ITUSP01V00Material%Product81,2MaterialWeightPlastic grams Cardboard 837grams OtherN/AgramsPALLET DIMENSIONSAirSea QTY PER LAYER 1515NUMBER OF LAYERS 35TOTAL UNITS per PALLET4575COMMODITY CODE8528 6910 00WEEE PRODUCER REG. NUMBERWEE/HA0196VQPRODUCT RECYCLETEST REPORTSPACKAGING / WASTE• Full HD 1080p image quality and pure, vivid colours – 2,000 ANSI Lumen brightness • Easy connectivity - 2x HDMI and MHL support• PureMotion technology – to eliminate motion blurring or image judder • Dynamic black technology - 40,000:1 contrast ratio。

DS160 DS161

Push to Exit Alarm will Sound
Push to Exit Alarm will Sound
Push to Exit Alarm will Sound
大门上方
天花板两扇门上方
3.4 安装前，先穿过探测器底座进行布线。
3.5 如使用微调板（TP160 或 TP161）进行安装时，必须如下图所示布线。
DS160/DS161 安装手册
P/N：37365K
DS160/DS161 被动红外出入口控制探测器
1.0 概述
DS160 是 UL 认证的一种被动红外探测器，是符合 UL294 标准的门禁装置，适用于各出入口场所（REX）。它采用红外能量传送原理，即所有的物体都发出红外能量，且越热的物体，发出的红外能量越多。当不同温度的物体通过探测区时，DS160 会探测到红外能量的变化。 DS160 还带有序列逻辑输入（SLI）功能，减少了非法进入保护区的可能。使用 SLI 功能后，用户可通过干式接点设备、其它探测器、读卡器或门禁系统布防 DS160。如果大门被无故撞开，DS160 将启动内置蜂鸣器。DS160 探测范围呈“C”型，可有效地对门、锁进行保护。 DS160 采用动态 II 信号处理技术，可防止由于环境因素引起的误报。继电器输出由两个“C”型接点组成，锁定时间为 0.5-64 秒可调。锁定时间有两种工作模式：重置式（只要侵入者还在其探测范围内，继电器将一直处于锁定状态）和非重置式（继电器在规定时间内锁定）。继电器还可编程为断电关门和断电关门两种。 DS160 可进行壁挂式或吊顶式安装，其探测范围可依据安装要求通过对准和/或屏蔽来获得更有效利用。该探测器不应用作紧急退出的主要出口。 DS160 系列现有外壳为浅灰色(DS160)或黑色(DS161)两种。现有微调板为浅灰色(TP160)和黑色(TP161)两种。

JCX-161控制系统产品说明书

FeaturesFeaturesThe Bridge Navigational Watch Alarm System (BNWAS) main purpose is to monitor the presence of watch officers and their alertness for early detection of unsafe sailing conditions. Calling functionsAlso available on the unit is the emergency call function which triggers all devices (buzzers) to activate. In addition, officer call also available which provides audible notice for backup officer at 2nd stage alarm.Dual LED backlightThe JCX-161 incorporates many display modesreadily available on a highly visible 4.5-inch LCDdisplay. Besides the display being fully dimmableand having backlit keys, it features dual LEDbacklight (white and orange), making it easy tooperate in various light settings on the bridge. AccessoriesOperationMotion sensorAn optional infrared motion sensor removes the need for the officer to manually press a button to stop the alarm. The sensor detects movement of the officer, which, once detected, will not allow the alarm to trigger.Uniform operationIn keeping with the company’s philosophy of an easy to use Man Machine Interface, the new generationdisplays have allowed JRC’s engineers to develop an exciting new software approach for uniform operation.Contrast Menu Cursor/Enter4.5-inch LCDDeactivate alarm Emergency call Buzzer Clear/BackDisplayDimmeralarms but also when the BNWAS is connected to other navigation equipment such as radar (JMA-9100) or ECDIS (JAN-901B), the alarm is reset when the officer physically operating the controls.The user can define aninterval sequence ofbetween 3 and 12 minutes.This will only give a visualindication. The alarm can bereset at any point in time.There is a visual indicator ofthe time countdown. Afterthe preset interval, an alarmsequence will go into effect. Manage other alarmsWhen any connected equipment alarm is activated, the BNWAS displays a list of alarm informationIn the box• Display + Bracket• Control unit• Buzzer (2x)• Reset button (3x)• Operation cardNWZ-4650 Weight 600 g (+ bracket 130 g)142 mm 175 mm 127 mm162 mm142 mm127 mmCutout dimensionsControl unitNCK-175 Weight 4,5 kg291 mm 105 mm 280 mmBuzzerNVS-785 Weight 200 gReset buttonNCJ-895 Weight 200 gLED warning lamp (option)NCD-2257 Weight 200 g70 mm 47 mm 100 mm 70 mm 47 mm100 mmMotion sensor (option)NYG-5 Weight 400 gReset button waterproof (option)NCJ-896 Weight 500 g70 mm 70 mm 47 mm60 mm100 mm 100 mm70 mm 100 mm47 mmJCX-161IMO compliant ✓Control unit NCK-175Power supply: 100-120V/200-240V AC ±10%, 50/60Hz, Power consumption: 2.5W Back up power: 24V DC -10%/+30%Display unit NWZ-46504.5-inch monochrome LCD (128 by 64 dots)Backlight: white and orange LED selectable Dimmer levels: bright, medium, darkSerial in/output: 1x port RS-422, 1x port RS-485Power supply: 12V DC (powered from control unit), Power consumption: 4W Buzzer NVS-785Tone: continuous on/off (default on)Sound pressure: high 85dB(A) and low 75db(A) (default low)Power supply: 12V DC (powered from control unit), Power consumption: 0.4W Reset button NCJ-895Color: yellowMechanical life: 1 million pressesPower supply: 12V DC (powered from control unit), Power consumption: 0.6W LED warning lamp NCD-2257Color: redDimmer levels: bright, medium, darkPower supply: 12V DC (powered from control unit), Power consumption: 0.5W Motion sensor NYG-5Type: infrared sensorDetection range (temperature 20°C):Horizontal 100°, vertical 81°, distance up to 5 mPower supply: 12V DC (powered from control unit), Power consumption: 0.4W Reset button WP NCJ-896Color: yellowMechanical life: 1 million pressesPower supply: 12V DC (powered from control unit), Power consumption: 0.6W Interfacing6x input reset button2x input reset by external navigational equipment (radar and/or ecdis)2x input reset by motion sensor (5x inputs for reset button may also be used)1x input automatic mode (autopilot)1x input emergency call (shared with reset button input)1x output system fail alarm 1x output to VDR (IEC61162-1)1x output visual indication1x output 1st stage bridge audible alarm4x output 2nd stage audible alarm (3 parallel connections per point)2x output 3rd stage audible alarm (5 parallel connections per point)Ambient conditionsTemperature: -15 to 55°C (operating)Relative humidity: 0% to 93% non-condensing Protection: IP22 (reset button waterproof: IP56)© JRC -13.07/67/1contents are subject to change without notice JRC offices around the worldAuthorized resellerAmsterdam Athens HamburgHanoiHong Kong JakartaManilla New York Rio de JaneiroSeattle Shanghai SingaporeTaipei Tokyojrc.co .jp。

74LS160中文资料_数据手册_参数

16 1
N SUFFIX PLASTIC CASE 648-08
16 1
D SUFFIX SOIC
CASE 751B-03
ORDERING INFORMATION
SN54LSXXXJ Ceramic SN74LSXXXN Plastic SN74LSXXXD SOIC
LOGIC SYMBOL 934 56
NOTE: The LS160A and LS162A can be preset to any state, but will not count beyond 9. If preset to state 10, 11, 12, 13, 14, or 15, it will return to its normal sequence within two clock pulses.
SN54/74LS160A • SN54/74LS161A SN54/74LS162A • SN54/74LS163A
STATE DIAGRAM
LS160A • LS162A
0
1
2
3
4
15
5
14
6
13
7
12
11
10
9
8
LS161A • LS163A
0
1
2
3
4
15
5
14
6
13
7
12
11
10
9
8
LOGIC EQUATIONS
*MR for LS160A and LS161A *SR for LS162A and LS163A
PIN NAMES
PE P0 – P3 CEP CET CP

MMBT1616贴片三极管规格书

A,Jun,2012JIANGSU CHANGJIANG ELECTRONICS TECHNOLOGY CO., LTDSOT-23 Plastic-Encapsulate TransistorsMMBT1616 TRANSISTOR (NPN) FEATURESz Audio frequency power amplifier z Medium speed switchingMARKING:16·MAXIMUM RATINGS (T a =25℃ unless otherwise noted) ELECTRICAL CHARACTERISTICS (T a =25℃ unless otherwise specified) ParameterSymbol Test conditions Min Typ Max Unit Collector-base breakdown voltageV (BR)CBO I C =10µA, I E =0 60 V Collector-emitter breakdown voltageV (BR)CEO I C =2mA, I B =0 50 V Emitter-base breakdown voltageV (BR)EBO I E =10µA, I C =0 6 V Collector cut-off currentI CBO V CB = 60V, I E =0 100 nA Emitter cut-off currentI EBO V EB =6V, I C =0 100 nA h FE(1) V CE =2V, I C =100mA 135 600 DC current gainh FE(2) V CE =2V, I C =1A 81 Collector-emitter saturation voltageV CE(sat) I C =1A, I B =50mA 0.3 V Collector-emitter saturation voltageV BE(sat) I C =1A, I B =50mA 1.2 V Base-emitter voltageV BE V CE =2V, I C =50mA 0.6 0.7 V Transition frequencyf T V CE =2V,I C =100mA, f=100MHz 100 MHz Collector output capacitance C ob V CB =10V, I E =0, f=1MHz 19 pF CLASSIFICATION OF h FE(1)RANK Y G L RANGE 135~270 200~400 300~600Symbol Parameter Value Unit V CBOCollector-Base Voltage 60 V V CEOCollector-Emitter Voltage 50 V V EBOEmitter-Base Voltage 6 V I CCollector Current 1 A P CCollector Power Dissipation 750 mW R ΘJAThermal Resistance From Junction To Ambient 167 ℃/W T jJunction Temperature 150 ℃ T stg Storage Temperature -55～+150℃ 【南京南山半导体有限公司 — 长电贴片三极管选型资料】【南京南山半导体有限公司 — 长电三极管选型资料】The bottom gasketThe top gasket3000×1 PCS 3000×15 PCS Label on the Reel Label on the Inner Box Label on the Outer Box QA Label Seal the boxwith the tape Seal the boxwith the tape Stamp “EMPTY”on the empty box Inner Box: 210 mm × 208 mm ×203 mm Outer Box: 440 mm × 440 mm × 230 mm。

CSC-161(163)A-FA-G数字式线路保护装置说明书(0SF.451.117)_V1.00F

如果产品与说明书有不符之处，请您及时与我公司联系，我们将为您提供相应的服务。

技术支持电话：************传真：************重要提示感谢您使用北京四方继保自动化股份有限公司的产品。

为了安全、正确、高效地使用本装置，请您务必注意以下重要提示：1)本说明书仅适用于CSC-161A-FA-G、CSC-163A-FA-G数字式高压线路保护装置，并对应于V1.00F及其以上版本的保护程序。

用于智能站、前接线方式，SV采样、GOOSE跳闸。

2)请仔细阅读本说明书，并按照说明书的规定整定、调试和操作。

若有特殊定制，请以工程说明书、工程资料为准。

3)为防止装置损坏，严禁带电插拔装置各插件、触摸印制电路板上的芯片和器件。

4)请使用合格的测试仪器和设备对装置进行试验和检测。

5)装置如出现异常或需维修，请及时与本公司服务热线联系。

6)本装置的出厂操作密码是：8888。

目录第一篇装置的技术说明 (1)1 概述 (1)1.1适用范围及功能配置 (1)1.2产品主要特点 (1)1.3装置执行的标准 (4)2 技术条件 (5)2.1环境条件 (5)2.2电气绝缘性能 (5)2.3机械性能 (5)2.4电磁兼容性 (5)2.5安全性能 (5)2.6功率消耗 (6)2.7装置主要技术参数 (6)3 装置硬件 (8)3.1装置结构 (8)3.2装置功能组件概述 (10)4 装置软件 (12)4.1保护程序整体结构 (12)4.2启动元件 (12)4.3选相元件 (13)4.4方向元件 (14)4.5检测功能和其他判别 (18)4.6纵联电流差动保护 (21)4.7相间及接地距离保护 (31)4.8零序过流保护 (36)4.9PT断线后的过流保护 (39)4.10过负荷告警 (39)4.11三相一次重合闸 (40)4.12测控部分的说明 (44)第二篇用户安装使用 (58)5 开箱检查 (58)6 安装调试 (58)6.1安装 (58)6.2通电前的检查 (58)6.4软件版本检查 (62)6.5打印功能检查 (62)6.6功能压板检查 (63)6.7开入量检查 (64)6.8开出传动 (65)6.9模拟量通道检查 (66)6.10光纤通道检查 (66)6.11保护整组试验 (66)7 整定值及整定计算说明 (70)7.1CSC-161A-FA-G保护定值清单 (70)7.2CSC-163A-FA-G保护定值清单 (73)7.3保护软压板状态清单 (77)7.4保护整定计算说明 (77)7.5保护功能压板的有关说明 (83)7.6通信参数 (85)8 装置接线及端子说明 (86)8.1差动保护用做旁路保护的接线 (86)8.2装置端子说明 (86)8.3模拟量采样数字接口说明 (90)8.4CSC-161装置虚端子表 (91)8.5CSC-163装置虚端子表 (95)9 人机接口及其操作 (100)9.1装置正面布置图 (100)9.2正常运行与显示 (102)9.3菜单结构及相关说明 (103)10 运行及维护 (107)10.1装置投运前检查 (107)10.2运行情况下注意事项 (107)10.3设备更换软件或插件后的操作 (107)10.4运行定值区的切换方法 (108)10.5保护报告的调取、打印方法 (109)10.6温馨提示 (109)10.7定期检修 (110)10.8过程层的数据异常处理方法 (110)11 保护报文汇总 (112)11.1事件报告 (112)11.2告警报告 (113)12 运输、储存 (117)13 订货须知 (117)14 附图 (118)附图1CPU简化原理图 (118)附图2MASTER板简化原理图 (119)附图3开入插件电原理图 (120)附图4开出插件电原理图 (121)附图5电源插件电原理图 (122)附图6CSC-161A-FA-G型装置正面端子图 (123)附图7CSC-163A-FA-G型装置正面端子图 (124)第一篇装置的技术说明1 概述1.1 适用范围及功能配置CSC-161A-FA-G和CSC-163A-FA-G系列数字式线路保护装置（以下简称装置或产品）适用于110kV中性点直接接地的大电流接地系统的输电线路。

NTS-161通讯管理机用户手册-V1

NTS －161通讯管理机用户手册南京天溯自动化控制系统有限公司NTS-161通讯管理机用户手册V1.0南京天溯自动化控制系统有限公司2009年11月安全说明1. 说明安全说明与相关的装置文件构成了安全操作、调试与测试的完整信息。

在对装置作任何操作之前，使用人员必须熟悉本安全说明的内容和装置铭牌的额定参数。

2. 健康和安全装置的正常和安全运行，依赖于恰当的运输、搬运和正确的贮存、安装和调试，以及细心的操作、维护和维修。

因此，只有合格人员才可操作或在装置上工作。

合格人员是指：——熟悉装置的安装、调试和运行，以及所接入的系统的人员；——能够按照认可的安全工程惯例执行操作的人员；——经过安全设备使用培训的人员；——经过急救培训的人员。

装置的安装、调试和运行由装置文件提供了说明。

但手册不能涵盖所有想得到的情况或所有的细节。

在出现问题或特殊情况时，未经正确授权不得采取行动。

3. 设备的安装、调试和维护警告！a）严格遵照执行国家及电力行业相关安全规程。

工作在高电压环境下，应严肃认真对待，以避免人身伤害或设备损坏。

b）在正常运行期间，严禁断开或连接与端子相连的导线或连接件，可能会中断设备的运行，损坏端子。

小心！a）为保障人身安全，请确认在安装NTS-161通讯管理机或接线时断开电源。

b）安装请计算出每根电源线和共用线上可能流过的最大电流，参考最大电流选择配线电缆，若电流大于配线电缆的最大额定电流，则配线过热可能会导致严重的设备损坏。

c）由于NTS-161通讯管理机采用外壳散热，因此在设备运行时，外壳摸上去可能会有一定的热度。

d）在接线时应将设备的信号线和电源线分开。

如果电源线和设备信号线不可避免交叉，务必保证这两类线在其交叉点是正交的。

e）不要将信号线和电源线置于同一个管道中，为避免干扰，用于传输不同信号的电缆应分开布线。

f）接线时确保将输入接线和输出接线分开，应将各接线标上标签，方便检修。

注意！a）装置应运行于其规定的电气和环境限值之内。

AZM 161SK_12 12RITU_024_B1 电磁闸产品说明书

13.06.2016 05:57:28hDatasheet AZM 161SK12/12RITU024B1AZM 161SK12/12RITU024B1Solenoid interlock / AZM 161I / AZM 161IB1(Minor differences between the printed image and the original product may exist!)• Compact design• Interlock with protection against incorrect locking.• Individual coding• Coding level "High" according to ISO 14119• Doubleinsulated • High holding force • Long life• 130 mm x 90 mm x 30 mm • 1 Cable entry M 20 x 1.5• Screw connection• Manual release, lateral • Emergency exit, rear• Particularly suitable for sliding doorsOrdering detailsProduct type description AZM 161SK12/12RITU024B1Article number 103000234EAN code eCl@ss 27272603ApprovalApprovalBG USA/CAN CCCClassificationStandardsEN ISO 138491B 10d Normallyclosed contact (NC) 2.000.000Mission time 20 Y earsnoticeGlobal PropertiesProduct name AZM 161IStandardsEN 6094751, BGGSET19Compliance with the Directives (Y/N) Y es Number of actuating directions 3 pieceActive principle electromechanical Individual coding Coding level "High" according to ISO 14119Duty cycleMagnet 100 %Materials Material of the housings glassfibre reinforced thermoplastic, Plastic selfextinguishing, Material of the actuator Stainless steel Material of the contacts SilverHousing coating NoneWeight515 gMechanical dataDesign of electrical connection Screw connectionCable section Min. Cable section1 x 0,25 mm² Max. Cable section1 x 1.5 mm², flexibleMechanical life> 1.000.000 operationsnotice All indications about the cable section are including the conductorferrules.Emergency unlocking device (Y/N)Y esManual release (Y/N)Y esEmergency release (Y/N)NoLatching force30 NPositive break force20 Npositive break travel10 mmClamping force F2000 NMax. Actuating speed2 m/sMinimum actuating radius150 mmActuating frequency max. 1000 / hAmbient conditionsAmbient temperature Min. environmental temperature−25 °C Max. environmental temperature+60 °CProtection class IP67 to IEC/EN 60529Electrical dataDesign of control element Normally open contact (NO), Opener (NC)Switching principle Creep circuit elementNumber of auxiliary contacts2 pieceNumber of safety contacts4 piecePower to unlock Y esPower to lock NoRated control voltage U s24 VAC/DCPower consumption max. 10 WRated impulse withstand voltage U imp4 kVRated insulation voltage U i250 VThermal test current I the6 AUtilisation category AC15: 230 V / 4 ADC13: 24 V / 2,5 AMax. fuse rating6 A gG Dfuse To DIN EN 602691ATEXExplosion protection categories for gases NoneExplosion protected category for dusts NoneMiscellaneous dataApplicationssliding safety guard,removable guard,hinged safety guardDimensionsDimensions of the sensor Width of sensor130 mm Height of sensor90 mm Length of sensor30 mmnoticeOn hinged guards, minimum actuating radius at 90° to the plane of the actuator 180 mmminimum actuating radius on hinged guards in line with the plane of the actuator 150 mmThe actuator is not available separately.The axis of the hinge should be 5 mm above the top edge of the safety switch and in the same plane Manual release• For maintenance, installation, etc.• Topside (ordering suffix ED) or rearside (ordering suffix EU) mounting possible• The emergency exit is used where an intervention in an already locked hazardous area is required • Emergency exit by pressing the red push button• For manual release using 5 triangular key, available as accessoryIncluded in deliveryIncluded in delivery• Individually coded actuator• tamperproof screws• Slot sealing plugsDiagramNote Diagrampositive break NC contactactiveno activeNormallyopen contactNormallyclosed contactSwitch travel diagramNotes Switch travel diagramContact closedContact openSetting rangeBreak pointPositive opening sequence/ angleVS adjustable range of NO contactVÖ adjustable range of NC contactN after travelOrdering suffixThe applicable ordering suffix is added at the end of the part number of the safety switch. Order example: AZM 161SK12/12RITU024B11637...16370,3 µm goldplated contactsDocumentsOperating instructions and Declaration of conformity (en) 562 kB, 20.01.2016Code: mrl_azm161i_enOperating instructions and Declaration of conformity (jp) 767 kB, 12.04.2016Code: mrl_azm161i_jpOperating instructions and Declaration of conformity (nl) 511 kB, 15.08.2012Code: mrl_azm161i_nlOperating instructions and Declaration of conformity (da) 504 kB, 27.08.2012Code: mrl_azm161i_daOperating instructions and Declaration of conformity (de) 565 kB, 20.01.2016Code: mrl_azm161i_deOperating instructions and Declaration of conformity (pl) 589 kB, 06.04.2016Code: mrl_azm161i_plOperating instructions and Declaration of conformity (es) 444 kB, 09.03.2016Code: mrl_azm161i_esOperating instructions and Declaration of conformity (pt) 510 kB, 27.08.2012Code: mrl_azm161i_ptOperating instructions and Declaration of conformity (sv) 498 kB, 27.08.2012Code: mrl_azm161i_svOperating instructions and Declaration of conformity (cs) 586 kB, 19.04.2016Code: mrl_azm161i_csOperating instructions and Declaration of conformity (it) 562 kB, 19.04.2016Code: mrl_azm161i_itOperating instructions and Declaration of conformity (fr) 567 kB, 28.04.2016Code: mrl_azm161i_frEAC certification (ru) 809 kB, 05.10.2015Code: q_6040p17_ruImagesProduct photoDimensional drawing (miscellaneous)Dimensional drawing (miscellaneous)Actuating radiusActuating radiusK.A. Schmersal GmbH & Co. KG, Möddinghofe 30, D42279 WuppertalThe data and values have been checked throroughly. Technical modifications and errors excepted. Generiert am 13.06.2016 05:57:28h Kasbase 3.2.2.F.64I。

M0116MY-161LSBR2-1, 规格书,Datasheet 资料

User’s GuideM0116MY-161LSBR2-1 VFD-RoHS Compliant(Vacuum Fluorescent Display Module)For product support, contactNewhaven Display International2511 Technology Drive, #101Elgin, IL 60124Tel: (847) 844-8795 Fax: (847) 844-8796February28, 2008 Newhaven Display InternationalDOCUMENT NO. REV. NO PAGESTANDARD NAME SPECIFICATION FOR APPROV AL1.0 1/101. SCOPEThis specification applies to VFD module (Model No: M0116MY-161LSB2-1) .2. FEATURES2.1 Simple connection to the host system data bus via four-wire clocked serial interface.2.2 Since a DC/DC converter is used, only +5Vdc power source is required to operate the module.2.3 One chip controller of f ers integral 6416 bit programmable logic array, low power consumptionand high reliability in services.2.4 32 brightness levels can be selected by brightness control command.2.5 High quality vacuum fluorescent display provides an attractive and readable medium.Other colors can be achieved by simple wavelength filters.2.6 Characters are provided in an attractive 14-segment starburst format.3. GENERAL DESCRIPTIONS3.1 This specification becomes effective after being approved by the purchaser.3.2 When any conflict is found in the specification,appropriate action shall be taken upon agreementof both parties.3.3 The expected necessary service parts should be arranged by the customer before the completionof production.4. PRODUCT SPECIFICATIONS4.1Type Table-1Type M0116MY-162LSB1-1 Digit Format 14Seg. & Comma, Decimal point4.2 Outer Dimensions, Weight(See Fig-4 on Page 4/11 for details) Table-2Parameter SpecificationUnitOuter DimensionsWidthHeightThickness177.30.532.00.515.0 Maxmmmmmm Weight Typical 90 GNAME SPECIFICATION FOR APPROV AL1.0 2/104.3 Specification of Display Panel (See Fig-4 on Page 5/10 ) Table-3Parameter Symbol Specification Unit Display Size (W*H) - 132.5*11.0 mmNumber of Digit - 16Digits -Character Size (W*H) - 5.0*10.0 mm Display Color -Blue-Green (peak 505nm) mm4.4 Environment Conditions Table-4Parameter SymbolMinMaxUnit Operating Temperature Topr -45 +85Storage Temperature Tstg -50 +95Humidity (Operating) Hopr 0 85 %Humidity (Non-operating) Hstg 0 90 %Vibration (1055Hz) -- 4 GShock --40 G4.5 Absolute Maximum Ratings Table-5Parameter SymbolMinMax.Unit Supply V oltage Vcc - 6.0Vdc Input Signal V oltage Vis -0.4 5.5 Vdc4.6 Recommend Operating Conditions Table-6Parameter SymbolMin Typ. Max. Unit Supply V oltage Vcc 4.5 5.0 5.5 VdcH-Level Input V oltage Vih 2.0 -- VdcL-Level Input V oltage Vil -- 0.8 Vdc4.7 DC Characteristics (Ta=+25, Vcc=+5.0Vdc) Table-7Parameter SymbolMin.Typ.Max.Unit Supply current ) Icc- 350 500 mA H-Level Input Current Iih -- 20.0 µAL-Level Input Current Iil -- -0.36 µALuminance L100200- ft-L ) The surge current can be approx. 3 times the specified supply current at power on..20s Ton(SCLK) 1.0s Toff(SCLK) 1.0s Tsu(DATA)200ns(DATA)100nsMin 40sMin 120sFig-4. Outer Dimensionswith the command is determined by the D6NAME SPECIFICATION FOR APPROV AL1.0 6/105.1.1 Buffer Pointer ControlThis command changes the display contents only at an arbitrary digit.(The RAM write address is set.) The digit position to be modified is represented by the value of D3D0.If the most significant digit(left-end digit) is to be selected, each of D3D0 are set to a value of “1” and if the second digit is to be selected ,each of D3D3 set to a value of “0”. Otherwise a decimal value of from “1”to “12” should be entered. The set value of D3D0 is lower than the decimal value of the specified position by 2.Table-10Binary Code Binary CodeDigit D7 D6D5D4D3D2D1DDigit D7D6D5D4D3D2D1DLeftEnd 1 0 1 0 1 1 1 1 9th 1 0 1 0 0 1 1 12nd 1 0 1 0 0 0 0 0 10th 1 0 1 0 1 0 0 03rd 1 0 1 0 0 0 0 1 11th 1 0 1 0 1 0 0 14th 1 0 1 0 0 0 1 0 12th 1 0 1 0 1 0 1 05th 1 0 1 0 0 0 1 1 13th 1 0 1 0 1 0 1 16th 1 0 1 0 0 1 0 0 14th 1 0 1 0 1 1 0 07th 1 0 1 0 0 1 0 1 15th 1 0 1 0 1 1 0 18th 1 0 1 0 0 1 1 0 RightEnd 1 0 1 0 1 1 1 05.1.2 Digit Counter ControlThis command is used to define the number of display digits. The code is normally used only during initialization routine of the host system.If all 13 characters are to be controlled, each of D3D0 are set to a value of “0”, otherwise a decimal value from “1” to “12” is entered, corresponding to the actual number of characters to be controlled.Table-11Binary Code Binary CodeNumber ofDisplay Digit D7D6D5D4D3D2D1DNumber ofDisplayDigitD7D6D5D4D3D2D1D1 1 1 0 0 0 0 0 1 9 1 1 0 0 1 0 0 12 1 1 0 0 0 0 1 0 10 1 1 0 0 1 0 1 03 1 1 0 0 0 0 1 1 11 1 1 0 0 1 0 1 14 1 1 0 0 0 1 0 0 12 1 1 0 0 1 1 0 05 1 1 0 0 0 1 0 1 13 1 1 0 0 1 1 0 16 1 1 0 0 0 1 1 0 14 1 1 0 0 1 1 1 07 1 1 0 0 0 1 1 1 15 1 1 0 0 1 1 1 18 1 1 0 0 1 0 0 0 16 1 1 0 0 0 0 0 0NAME SPECIFICATION FOR APPROV AL1.0 7/105.1.3 Brightness ControlThis command sets the brightness of the VFD. This command allows the brightness to be adjusted by 1/32 step.As shown in Table-12, the test value ranges from 0 to 31.Table-12Binary Code Binary CodeBrightness Level D7D6D5D4D3D2D1DBrightnessLevelD7D6D5D4D3D2D1D0/31(0.0%) 1 1 1 0 0 0 0 0 16/31(51.6%) 1 1 1 1 0 0 0 01/31(3.2%) 1 1 1 0 0 0 0 1 17/31(54.8%) 1 1 1 1 0 0 0 12/31(6.4%) 1 1 1 0 0 0 1 0 18/31(58.1%) 1 1 1 1 0 0 1 03/31(9.7%) 1 1 1 0 0 0 1 1 19/31(61.2%) 1 1 1 1 0 0 1 14/31(12.9%) 1 1 1 0 0 1 0 0 20/31(64.5%) 1 1 1 1 0 1 0 05/31(16.1%) 1 1 1 0 0 1 0 1 21/31(67.7%) 1 1 1 1 0 1 0 16/31(19.4%) 1 1 1 0 0 1 1 0 22/31(71.0%) 1 1 1 1 0 1 1 07/31(22.6%) 1 1 1 0 0 1 1 1 23/31(74.2%) 1 1 1 1 0 1 1 18/31(25.8%) 1 1 1 0 1 0 0 0 24/31(77.4%) 1 1 1 1 1 0 0 09/31(29.0%) 1 1 1 0 1 0 0 1 25/31(80.6%) 1 1 1 1 1 0 0 110/31(32.3%) 1 1 1 0 1 0 1 0 26/31(83.9%) 1 1 1 1 1 0 1 011/31(35.5%) 1 1 1 0 1 0 1 1 27/31(87.1%) 1 1 1 1 1 0 1 112/31(38.7%) 1 1 1 0 1 1 0 0 28/31(90.3%) 1 1 1 1 1 1 0 013/31(41.9%) 1 1 1 0 1 1 0 1 29/31(93.5%) 1 1 1 1 1 1 0 114/31(45.2%) 1 1 1 0 1 1 1 0 30/31(96.8%) 1 1 1 1 1 1 1 015/31(48.4%) 1 1 1 0 1 1 1 1 31/31(100%) 1 1 1 1 1 1 1 15.2 Input Display Data WordDisplay data words are loaded into the display buffer of module as 8-bit codes, with the MSB set to “0”. The 64 available codes are shown in Table-13 on next page.16 display data words must be entered to fully load the display data buffer. The display buffer pointer (write inposition) specified by the buffer. Pointer control command is automatically incremented by one each time the display data is entered.To set the comma or decimal point, the display data codes of 2C Hex or 2E Hex is entered respectively. Only when 2C Hex and 2E Hex data are entered, the display buffer pointer in the RAM is not automatically incremented but stays present location.NAMESPECIFICATION FOR APPROV AL1.0 8/10 Character Font TableTable-14NAME SPECIFICATION FOR APPROV AL1.0 9/105.3 RESETThe reset function allows the users to re-initialize the alphanumeric display controller, while the power is still applied to the module, by applying a logical “0” to pin #5 and pin #7(/RST) of the connector. (Pulse Width≥200us)When the controller is initialized, the display status is shown in Table-13. The RAM data (Display Buffer Data) are the same as the prior data. Table-13Binary CodeParameter ResetStatusD7 D6 D5 D4 D3 D2 D1 D0 Write in Position Left End Digit 1 0 1 0 1 1 1 1Number of Display Digit 16 Digits 1 1 0 0 0 0 0 0BrightnessLevel 0% 1 1 1 0 0 0 0 0DOCUMENT NO. REV .NO PAGE TNDARDNAME SPECIFICATION FOR APPROV AL 1.0 10/106. OPERATING RECOMMENDATIONS6.1 Avoid applying excessive shock or vibration beyond the specification for the VFD module.6.2 Since VFD is made of glass material, careful handling is required.6.3 When mounting the VFD module to your system, leave a slight gap between the VFD glass and your front panel.The module should be mounted without stress to avoid flexing of the PCB.6.4 Avoid plugging or unplugging the interface connection with the power on, otherwise it may causesevere damage to input circuitry.6.5 Slow starting power supply may cause non-operation because one chip Mi-com won’t be reset.6.6 Exceeding any of maximum ratings may cause the permanent damage.6.7 Since the VFD module contain high voltage source, careful handling is required while power is on.6.8 When the power is turned off, the capacitor does not discharge immediately.So the high voltage applied to the VFD must not get in contact with ICs.In other word s , short-circuit of mounted components on PCB within 30 seconds after power-off maycause damage to the module.6.9 The power supply must be capable of providing at least 3 time s the rated current, because the surge currentmay be 3 times the specified current consumption when the power is turned on.6.10 Avoid using the module where excessive noise interference is expected.Noise may affect the interface signal and cause improper operation. I t is important to keep the length of theinterface cable less than 50cm.6.11 Since all VFD modules contain C-MOS ICs, anti-static handling procedures are always required.芯天下--/NOTE: Newhaven Display reserves the right to change or modify this existing specification and or product in order to improve the quality of this design.。

74LS161中文资料_数据手册_参数

• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
7
SN54S162, SN74S162 SYNCHRONOUS 4-BIT COUNTERS
SDLS060 – OCTOBER 1976 – REVISED MARCH 1988
8
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
11
SN54160 THRU SN54163, SN74160 THRU SN74163 SYNCHRONOUS 4-BIT COUNTERS
SDLS060 – OCTOBER 1976 – REVISED MARCH 1988
SDLS060 – OCTOBER 1976 – REVISED MARCH 1988
18
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
SN54160 THRU SN54163, SN54LS160A THRU SN54LS163A,
SN74160 THRU SN74163, SN74LS160A THRU SN74LS163A, SYNCHRONOUS 4-BIT COUNTERS
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3
SN54160, SN54162, SN74160, SN74162 SYNCHRONOUS 4-BIT COUNTERS
SDLS060 – OCTOBER 1976 – REVISED MARCH 1988
D

TE161BSM液压站讲明书

矿井提升机通用部件液压站代号TE161BSM 中信重型机械公司使用说明书共 10 页第 1 页目录1 概述 ....... . (2)2 主要技术参数 (2)3 主要结构与工作原理 (2)4 安装调试 (4)5 维护、保养、常见故障及排除方法 (7)6 吊装与运输 (9)7 储存条件与储存期限 (9)注意事项1 用户在安装、使用和操作前，应认真阅读本使用说明书，并培训司机和维修人员。

2 液压站使用前，必须对管路进行循环冲洗，化验油品的清洁度不低于NSA1638标准9级，或不低于ISO4406标准18/15级后，结束循环冲洗过滤。

3本液压站在地面上使用。

用户使用与其配套的电器设备和元件，必须有“煤安”标志4 本使用说明书的解释权归洛阳中信重机自动化工程有限责任公司液压所。

5 本使用说明书如有改动，恕不另行通知。

6 联系地址:河南省洛阳市建设路206号邮编:471039矿井提升机通用部件液压站代号TE161BSM 中信重型机械公司使用说明书共 10 页第 2 页1概述液压站是矿井提升机重要的安全和控制部件，它和盘形制动器组合成为一套完整的制动系统，为盘形制动器提供可以调节的压力油，使提升机获得不同的制动力矩；使矿井提升机正常地运转、调速、停车。

在任何事故状态下，可以使盘形制动器的油压迅速降低到预先调定的某一值，经延时后，盘形制动器的全部油压值迅速回到零。

使提升系统处于全制动状态。

TE161B液压站在以往液压站的基础上增加了电加热装置，适用于较寒冷地域。

该液压站适用于XKT；XKT-B；JK型单绳单筒矿井提升机；JKM型井塔式多绳摩擦式提升机；JKMD落地式多绳摩擦式提升机。

该液压站应在海拔不超过1000 m，周围环境温度10--40℃的范围内；且通风良好、洁净、无有害气体，没有导电尘埃，无破坏金属及绝缘的腐蚀性气体，无爆炸性气体的室内安装使用。

2主要技术参数2.1 最大工作油压 6.3 MPa2.2 最大供油量 14 l/min2.3 工作油温 15--65 ℃2.4 油箱储油容积 700.0 l2.5 二级制动延时时间 0—10 s2.6电液比例溢流阀控制电压≤ 10 V2.7 液压油牌号 L-HM46液压油2.8 电加热器功率 2X2.2KW2.9 外型尺寸 1400×1100×1350 (mm)2.10 重量（不带油液） 800 kg3主要结构与工作原理参见TE161B液压站的原理图（见图1）3.1 结构特点：TE161B液压站主要由油箱、泵装置和阀组组成。

CSC-161说明书(0SF.451.033)_V1.01

第二篇用户安装使用 .................................................. 26
4 开箱检查 ........................................................... 26
5 整定值及整定计算说明 ............................................... 26
3 装置软件 ........................................................... 10
3.1 保护程序整体结构................................................................................................ 10 3.2 启动元件................................................................................................................ 10 3.3 选相元件................................................................................................................ 11 3.4 距离保护................................................................................................................ 11 3.5 TV 断线后的两段过流保护................................................................................... 14 3.6 零序电流保护........................................................................................................ 15 3.7 过电流保护............................................................................................................ 15 3.8 过负荷保护............................................................................................................ 16 3.9 低周减载功能........................................................................................................ 16 3.10 低压减载功能...................................................................................................... 17 3.11 三相一次重合闸.................................................................................................. 17 3.12 断路器失灵启动电流元件.................................................................................. 18 3.13 反时限保护.......................................................................................................... 18 3.14 慢速重合闸功能.................................................................................................. 18 3.15 异常检测和判别.................................................................................................. 18 3.16 保护逻辑框图 ....................................................................................................... 21

松下 KX-TD161 Doorphone Card 说明书

Installation Instructions Doorphone Card Model KX-TD161Please read this manual before installing the card.Thank you for purchasing the Panasonic Card. Doorphone CardSupports 4 doorphones and 4 door openers. The doorphone is an option (KX-T30865).ContentsLocation of the Card . . . . . . . . . . . . . . . . . . . . .3 Installation for the Card . . . . . . . . . . . . . . . . . .5 Doorphone Card . . . . . . . . . . . . . . . . . . . . . . . . . 7Location of the CardThe location of the optional card is shown below. Precaution: To protect the printed circuit boards (P-boards) from static electricity, do not touchparts on the P-boards in the main unit andon the optional cards.Installation for the Card1.Set the power switch on the main unit to the OFFposition and disconnect the power cord from the AC outlet.2.•The two screws are attached to the front coverwith springs so that they will not be lost.3.To install the Doorphone Card, see page 7.4. Close the front cover and screw.5.Connect the power cord to the AC outlet and thenset the Power Switch on the main unit to ONposition.Doorphone CardBefore installing the Doorphone Card to the main unit, install the Doorphone (KX-T30865). For details about the doorphone, refer to the Installation Manual.1.Connect two 4-conductor modular connectors to theDoorphone Card Cabinet, and pass the cords through the grooves in the cabinet.2.Attach the Doorphone Card Cabinet to the main unitand press down.3.Connect the cord to the Doorphone Card Connector.Wiring of the Doorphone1.Connect the Doorphone Card to the terminal boxusing two 4-conductor modular connectors.2.Connect the wires of doorphone 1 to the red andgreen screws of the terminal box.3.Connect the wires of doorphone 2 to the yellow andblack screws of the terminal box.4.Connect the wires of doorphone 3 to the red andgreen screws of the terminal box.5.Connect the wires of doorphone 4 to the yellow andblack screws of the terminal box.Note•NB Colors shown on the above diagram indicate the internal cable connections of the Terminal Box.1.2.Loosen the screws on the terminal strip.3.Insert the wires coming from the door openers intoholes and tighten the screws.Pass all the wires through the Holder.Note•Set the door opener paired with the doorphone.•For wiring, UL 1015, AWG 22 twisted wire or theequivalent is recommended.•The wire should be between 1.2 mm and 2.4 mm(3/64 inch and 3/32 inch) in diameter includingthe coating.Panasonic Consumer ElectronicsCompany, Division of MatsushitaElectric Corporation of AmericaOne Panasonic Way, Secaucus,New Jersey 07094Panasonic Sales Company (“PSC”),Division of Matsushita Electric ofPuerto Rico, Inc.Ave. 65 de Infantería, Km. 9.5,San Gabriel Industrial Park, Carolina,Puerto Rico 00985Copyright:This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME). Under the applicable copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of KME and its licensee.©2001 Kyushu Matsushita Electric Co., Ltd. All Rights Reserved. Printed in the United Kingdom PSQX2631ZA KA0901HK0。

POWERTEC 161C、191C、231C和271C产品的备件说明书

1 X
2719-107-543R
1 X X
2719-107-155R
1 X
2719-107-074R
1 X
2719-107-095R
1 X
1158-113-304R
3 X X X
C-2986-001-2R
1 X X X
9ET10491R
1 X X X
1115-260-215R
POWERTEC
IM3015 09/2016 REV07
161C, 191C, 231C & 271C
Spare Parts..................................................................................................................................................... 1
Description FRONT PANEL STICKER STICKER STICKER STICKER STICKER POTENCIOMETER SOCKET KNOB SWITCH SWITCH RUBBER SHIELD SWITCH S1 INTERLOCK LAMP H1 LEFT SIDE PANEL STICKER STICKER COVER STICKER DIVIDER RUBBER BUSH INSULATING RING STICKER FUSE SOCKET FUSE F1 FUSE F2 REEL HUB STANDARD PLASIC NUT KNOB SHELF TERMINAL BLOCK X1 RUBBER CABLE BUSH STICKER

安信可 BW16 规格书说明书

文档“按现状”提供，不负任何担保责任，包括对适销性、适用于特定用途或非侵权性的任何担保，和任何提案、规格或样品在他处提到的任何担保。

本文档不负任何责任，包括使用本文档内信息产生的侵犯任何专利权行为的责任。

本文档在此未以禁止反言或其他方式授予任何知识产权使用许可，不管是明示许可还是暗示许可。

文中所得测试数据均为安信可实验室测试所得，实际结果可能略有差异。

文中提到的所有商标名称、商标和注册商标均属其各自所有者的财产，特此声明。

最终解释权归深圳市安信可科技有限公司所有。

注意由于产品版本升级或其他原因，本手册内容有可能变更。

深圳市安信可科技有限公司保留在没有任何通知或者提示的情况下对本手册的内容进行修改的权利。

本手册仅作为使用指导，深圳市安信可科技有限公司尽全力在本手册中提供准确的信息，但是深圳市安信可科技有限公司并不确保手册内容完全没有错误，本手册中的所有陈述、信息和建议也不构成任何明示或暗示的担保。

文件制定/修订/废止履历表版本日期制定/修订内容制定核准V0.92019.06.15首次制定杨小飞徐宏V1.02019.10.29资料更新谢一骥徐宏V1.12021.02.07补充FLASH说明陈聪徐宏V1.22022.05.11完善BLE说明陈聪徐宏目录一、产品概述 (5)二、电气参数 (7)三、外观尺寸 (8)四、管脚定义 (9)五、原理图 (10)六、设计指导 (10)七、回流焊曲线图 (14)八、包装信息 (15)九、联系我们 (15)一、产品概述BW16是安信可基于RTL8720DN开发的双频Wi-Fi+蓝牙SoC模组。

BW16支持双频（2.4GHz或5GHz）WLAN和低功耗蓝牙5.0，集成了ARM V8（兼容Cortex-M4F）高性能MCU、ARM V8M（兼容Cortex-M0）低功耗MCU、WLAN（802.11a/b/g/n）、MAC，蓝牙基带和RF基带，并提供了一组可配置的GPIO口，用于不同外围设备的控制。

安美特161镀锡说明书

安美特161镀锡说明书
摘要：
1.产品简介
2.安装步骤
3.使用方法
4.维护保养
5.安全注意事项
正文：
【产品简介】
安美特161 镀锡是一款高品质的电子产品，其优秀的性能和便捷的操作方式深受用户喜爱。

该产品在设计上注重人性化，让用户在使用过程中感受到科技带来的便捷。

【安装步骤】
安装安美特161 镀锡的过程十分简单，只需按照以下步骤操作即可：
1.首先，检查产品及配件是否齐全，确保没有损坏。

2.将产品放置在合适的位置，确保其稳定性。

3.连接电源线，并确保电源线连接牢固。

4.打开产品，按照提示进行初始设置。

【使用方法】
安美特161 镀锡的使用方法非常简单，用户只需按照以下步骤操作即可：
1.根据需要调整产品设置。

2.将需要处理的物品放置在产品上。

3.启动产品，按照提示进行操作。

【维护保养】
为了保证安美特161 镀锡的正常使用，用户需要定期对其进行维护保养。

具体步骤如下：
1.定期清洁产品表面，避免污渍影响使用。

2.检查产品连接线是否松动，如有需要及时固定。

3.避免产品在潮湿环境中使用，防止内部元件受潮。

【安全注意事项】
在使用安美特161 镀锡时，用户需要注意以下安全事项：
1.确保产品在正常工作状态下使用，避免过载。

2.使用时请勿让儿童单独操作，防止意外发生。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

◆名称：TD 数传模块
◆型号：G161
◆图片：
◆功能特点：
◆规格书：
▪工作频率：
TD-SCDMA:2010–2025 MHz
GSM/DCS: 900/1800MHz
▪供电范围：3.3 ~ 4.5 V
▪功耗：关机模式< 100uA；睡眠模式< 3mA ▪温度范围：
–正常工作温度：-10 ~ 55 ℃
–极限工作温度：-20 ~ 75 ℃
–储藏温度：-40 ~ 85 ℃
▪湿度范围：20％～90％
▪外型尺寸：50.8×30.2×3.0mm [±0.2](mm)
▪重量：约15g
▪发射功率：
–EGSM900M：32dBm（2W，Class4）；
–DCS1800M：30dBm（1W，Class1）
–TD-SCDMA：25dBm（0.3W）
▪通过AT命令控制（GSM07.10），支持WMMP协议
▪传真
–Group3 Class1
▪语音
–AMR
–半速率（FR）
–全速率（HF）
–增强型全速率（EFR）
–回声/侧音消除
–噪音抑制
–D类功放
▪数据
–编码格式：CS1~CS4
–CSD最大14.4kbps
–PBCCH
–USSD
传输速率
▪HSDPA
–下行最大速率2.8M bps；
–上行最大速率384k bps ；▪TD-SCDMA
–下行最大速率384k bps；
–上行最大速率128k bps
▪EDGE
–下行最大速率236.8k bps；
–上行最大速率118k bps
▪GPRS
–下行最大速率85.6k bps；
–下行最大速率42.8k bps；▪短信
–支持点对点的收发
–支持TEXT 和PDU 模式▪软件特性
–支持通用PPP连接PAP（密码验证协议）协议
–内嵌TCP/IP协议（用AT命令可以实现TCP，UDP透明传输）–HTTP
硬件接口
▪80 Pin 板对板连接器
▪支持标准射频连接器接口
▪支持2组UART,最大支持921600kbps，其中一组带硬件流控制▪支持1路USB2.0协议规范
▪支持1路SPI串口,可驱动LCD等外设
▪支持SIM 卡接口
–可选1: 外置SIM 卡座(3V/ 1.8V)
–可选2: 嵌入式SIM 卡芯片
▪支持一路2.8V LDO输出，一路恒流Open-Drain驱动
▪支持多路GPIO
▪支持1路IIC接口
▪支持2路外部中断输入,
▪支持2路10Bit ADC.
▪支持最多7*7按键矩阵
▪支持1组PCM数字音频接口▪支持RTC
▪PWM。