焊接专业关联词汇(无损检测汉英 英汉词汇汇编)
焊接专业词汇英汉对照.
焊接常用词语英汉对照actual weld-throat thick-ness焊缝厚度all-around weld整周焊缝all-around weld (整周焊缝)环焊缝angle butt weld斜对接焊angle weld角焊appearance of weld焊缝成形arc-seam weld电弧缝焊arc-spot weld电弧点焊arc-weld电弧焊aspect ratio of weld焊缝成形系数at weld edge在焊缝边上attachment weld连接焊缝automatic spot weld自动点焊法automatic weld自动焊接axis of a weld焊缝中心线; 焊接轴线axis of weld焊缝轴线; 焊接轴线back of weld焊缝背面backing groove of weld焊缝反面坡口backing weld底焊; 底焊焊缝bare metal arc weld裸焊条电弧焊bead weld珠焊; 堆焊bead-on-plate weld堆焊焊缝beading weld凸焊beam-to-beam weld梁间焊接; 梁式引线焊接block sequence weld分段多层焊bond weld钢轨接头焊接bridge seam weld桥缝焊接; 桥线焊brize weld硬焊butt weld对接焊缝butt weld ends对头焊接端butt-weld碰焊; 平式焊接; 对头焊接butt-weld in the downhand position对接平焊butt-weld joint对头焊接butt-weld pipe mill对焊管轧机button spot weld按电钮点焊cap weld最后焊层; 盖面焊缝carbon content of weld materials焊接材料的碳含量cast-weld construction铸焊结构caulk weld填缝焊caulking weld密实焊缝chain intermittent fillet weld链式分段角焊; 并列间断角焊缝chain intermittent weld并列焊接circular weld环形焊缝circumferential weld环缝; 环焊缝cleft weld裂口焊closed weld底边无缝焊; 无间隙焊缝closed-chamber fusion weld闭室熔焊cluster weld丛聚焊缝coil weld卷板对接焊; 卷板对接焊; 板卷焊cold weld冷压接commutator-controlled weld换向控制焊接complete penetration butt weld贯穿对焊composite weld紧密焊缝; 强度密封焊缝concave filled weld凹形角焊缝concave filler weld凹角焊concave fillet weld凹面填角焊concave weld凹焊缝; 凹面焊; 凹形焊缝; 轻型焊connective weld联系焊缝continuous butt-weld mill连续式炉焊管机组continuous fillet weld连续(填)角焊缝; 连续角焊缝; 连续贴角焊continuous weld连续焊缝continuous weld process连续式炉焊管法contour weld特形焊接convex fillet weld凸角焊缝; 凸形角焊缝convex weld凸焊缝; 凸形焊缝copper weld wire包铜钢丝corner flange weld单卷边角焊缝corner weld角焊corner-flange weld卷边角焊缝; 卷边角焊缝crack of weld焊部裂纹cross weld十字交叉焊缝; 横向焊缝cross-wire weld十字焊crotch weld楔接锻接; 楔接焊接cup weld带盖板焊缝depth of weld焊接深度dissimilar weld metal不同的焊接金属; 不同金属的焊接distance between the toes of a weld焊缝宽度double groove weld双面坡口焊缝double-bevel groove weld双斜边坡口焊缝; 双斜坡口焊double-flanged butt weld双弯边对接焊缝double-V groove weld双斜边坡口焊缝; 双斜坡口焊downhand weld平焊缝duplex spot weld双点点焊接头edge joint weld边缘焊edge weld端接焊; 端接焊缝; 端面焊缝; 对边焊electric resistance weld mill电阻焊管机electric weld-pipe mill电焊管机electric-weld pipe mill电焊管机emporary weld临时点定焊缝excess weld metal焊缝补强金属; 补强; 补强焊料; 补强金属excess weld metal(焊缝的)余高explosive weld爆炸焊接face of weld焊缝表面; 焊接面fibrous weld纤维状焊缝field weld现场焊接filler weld填角焊缝fillet weld角焊缝; 填角焊; 贴角焊fillet weld in normal shear (搭接接头的)正面角焊缝fillet weld in parallel shear侧面角焊缝; 侧面填角焊fillet weld in the flat position角接平焊; 水平角焊缝fillet weld in the horizontal position横向角焊缝fillet weld size焊角尺寸; 填角焊缝尺寸flame weld火焰焊接flange weld卷边焊缝; 卷边焊缝flange-to-web weld卷边焊缝; 卷边焊缝flanged butt weld弯边对接焊flanged edge weld卷边焊; 卷边焊flash butt weld闪光焊flash weld闪速对焊flat faced fillet weld平顶角焊缝焊接flat fillet weld平角焊ing of fillet weld角焊缝平焊; 船形角焊flush fillet weld平角焊flush weld削平补强的焊缝; 平焊接; 无加强高的焊缝forge weld锻焊焊缝forged weld (焊后锻压的)锻压焊缝form factor of the weld焊缝成形系数formation of weld焊缝成形front fillet weld正侧面填角焊缝; 正面填角焊front(al) fillet weld正面角焊缝full fillet weld满角焊缝; 全角焊full penetration butt weld满对接焊full weld满焊full-fillet weld满角焊full-sized weld全尺寸焊缝full-strength weld (与母材等强)等强焊缝gap weld特殊点焊; 双极单点焊gas-pressure weld气压焊girth weld环形焊缝gravity weld倚焊groove weld坡口焊; 坡口焊缝; 有坡口焊缝; 凹槽焊groove-weld joint有坡口焊接接头hammer weld锻焊hand weld手焊焊缝height of reinforcement of weld加强焊缝高度helical-weld pipe螺旋焊管high performance weld flux高性能焊剂horizontal fillet weld横向角缝焊接horizontal weld横向焊缝horizontal-vertical fillet weld横向垂直角焊缝hot weld encapsulation热焊封袋hydraulic automatic weld液压自动焊接hydraulic weld process液压焊接法inclined weld斜焊inconel weld单面焊缝incorrect weld profile焊缝形状不对incorrect weld size焊缝尺寸不对induction weld mill感应焊管机inside corner weld内角焊接inside fillet weld内角焊接inside weld内焊缝insufficient or excess reinforcement of weld加强焊缝不足或过量intermittent fillet weld间断角缝焊接; 断续角焊缝intermittent weld断续焊; 断续焊缝jam weld对接焊; 对头焊接lap fillet weld搭接角焊缝laser (beam) weld (ing)激光焊lateral weld侧焊; 侧面焊缝leg of a fillet weld角焊缝; 角焊缝焊脚leg of fillet weld圆角焊肉厚length of weld焊缝长度light closing weld轻连续焊接light fillet weld轻型填角焊; 小填角焊light weld轻焊缝Lincoln weld埋弧自动焊longitudinal fillet weld纵向角焊longitudinal weld纵向焊缝longitudinal weld (焊接用语)纵缝loose weld脱焊main weld主焊缝mash seam weld压薄缝焊; 滚压焊mash weld点焊; 点压焊melt thru weld熔透焊缝melt-through weld透溶焊melten weld pool焊接熔池melting through weld熔透焊缝miter weld平顶角焊缝; 斜接角焊缝molten weld metal熔融焊接金属mulitple impulse weld多脉冲焊缝multilayer weld多层焊缝multipass weld多道焊缝multiple arc weld多弧焊缝multiple-electrode submerged arc weld多电极埋弧焊multiple-pass weld多道焊缝; 多路焊接multirun weld多道焊缝nonpressure thermit weld不加压热剂焊缝normal weld正常焊接oblique fillet weld斜交角焊缝; 斜角焊接one-pass weld单层焊缝open butt weld开口对接焊open weld留间隙焊缝; 空隙焊outside weld外焊缝over weld过焊overhead fillet weld仰焊角焊缝overhead weld仰焊oversize weld超尺寸焊缝oxygen weld氧气焊接parallel-arc weld并列弧焊patch weld补焊; 补孔焊缝Peltier's cross weld珀耳帖交叉焊接penetration weld熔透焊缝percussion weld冲击焊缝; 冲击焊接periphera weld环形焊缝pitch of weld焊缝接距; 焊线距plain butt weld无坡口对接焊; 平头对接焊缝plasma-arc weld等离子弧焊接plug weld塞焊焊缝point of weld焊接点point weld点焊poor weld劣质焊缝; 有缺陷的焊缝porous weld多孔焊缝; 疏松焊缝positioned weld平位焊缝; 暂焊post weld annealed (PWA)焊后退火poured weld铸焊焊缝powder weld process粉末焊接法practice weld试验焊缝pressure weld压焊pressure-controlled weld压力控制焊接pressure-tight weld气密焊; 密封焊道principal weld主要焊缝profile of fillet weld填角焊缝轮廓progress of weld焊向projection weld凸焊; 凸焊焊缝projection weld machine凸点电阻焊机pulsating weld脉冲接触焊push weld挤焊quilting weld钉焊reinforced butt weld补强的对接焊缝; 补强式对接焊缝reinforced weld加强焊接reinforcement of weld焊缝加厚; 补强金属; 加强焊缝resistance weld mill电阻焊管机resistance weld pipe电阻焊管resonance butt weld谐振式对接焊restarting a weld再引弧ripple weld鳞状焊缝rivet weld电铆; 电铆焊缝root face of weld焊缝根部钝边root gap of weld焊缝根部间隙root of weld焊缝根部; 焊根root opening of weld焊缝根部间隙root radius of weld焊缝坡口根部半径sagged weld下垂焊缝scarf weld楔口焊接seal weld填焊; 致密焊缝; 密封焊; 密封焊道; 密封焊缝sealing weld封焊seam weld滚焊semi-automatic arc weld半自动电弧焊sequence weld timer序列焊接时间调节器shallow weld浅焊shop weld工厂焊接shot weld点焊shoulder of weld焊缝根部钝边side fillet weld侧面角焊缝; 侧面填角焊缝; 侧面贴角焊side lap weld侧边搭接焊; 弯边搭焊缝side weld侧焊缝; 边焊single lap weld单搭接焊single strap butt weld单面盖板对接焊single-bevel groove weld单斜角槽焊single-fillet weld单边角接焊缝single-pass weld单道焊site weld现场焊接; 安装焊; 安装焊接size of a fillet weld焊角尺寸size of weld焊件的大小; 焊区尺寸skew weld斜焊skin weld表面焊接sleeve weld套筒焊接slip-weld hanger卡瓦焊接套管挂slot weld槽塞焊; 长孔焊; 开槽搭焊缝; 切口焊缝ing slotted weld槽焊slotted lap weld切口搭接焊smooth fillet weld平填角焊缝socket weld ends承插焊接端soft-weld铜镍焊条合金solvent weld溶剂焊接space of intermittent weld断续焊缝间距; 断续焊间距spiral weld螺旋形焊缝spiral weld-pipe mill螺旋焊管机spot weld焊点spot weld bonding胶结点焊spot weld nugget点焊熔核spreading weld宽缝焊接; 加宽的焊缝square butt weld平头对接焊缝square groove weld无坡口槽焊staggered intermittent fillet weld (ing)交错断续角焊staggered intermittent weld交错断续焊缝; 交错间断焊staggered plug weld交错塞焊standard reinforced fillet weld标准加强角焊缝stick-out weld未熔合点焊接头stitch-and-seam weld点线焊straight butt weld无坡口对接接头strapped weld搭板对接焊缝strength weld受载焊缝; 强固焊接; 承载焊缝; 高强度焊接structural weld强固焊缝surface of weld焊缝表面surface weld表面焊缝surface weld metal buildup表面焊缝金属的形成synthetic apparatus for weld thermal cycle焊接热循环模拟装置T weld丁字接头焊缝T-filled weld丁字形角焊T-fillet weld丁字接头角焊缝tack weld定位焊点; 定位焊缝; 临时点焊; 预焊; 平头焊接(welding)定位焊tandem arc weld前后弧焊temporary weld临时点固焊缝tension weld受拉焊缝test weld试焊throat depth (thickness) of fillet weld角焊缝厚度throat of fillet weld凹角焊喉; 填角焊缝喉长throat of weld凹角焊喉tight weld密封焊接; 致密焊缝tight-strong weld密实强固焊缝toe of the weld焊缝边界toe of weld焊趾toe weld趾部焊缝torch weld气焊焊缝total amount of weld fumes焊接发尘量transverse fillet weld横向角焊缝; 正面角焊transverse weld横向焊缝trial weld试验焊接undercut weld底切焊接undressed weld (增加焊缝)未加工焊缝unequal fillet weld焊脚不等的角焊缝unfitness of butt weld焊缝对口错边量union-melt weld埋弧焊unload weld非承载焊缝unspaced butted weld无间隙对接焊缝upgrading of boiler weld锅炉焊缝加强vertical fillet weld立焊角焊缝vertical weld立焊weak weld不强固焊缝weaving weld横向摆动焊缝weld焊; 焊接的; 补焊weld all around围焊weld appearance焊缝外观weld assembly焊接组件weld back-up焊缝背垫weld backing焊缝衬垫weld bead焊缝; 熔敷焊道weld bead height焊缝高度weld beading焊瘤weld bond熔合线weld bridge seam搭桥焊缝; 桥接焊缝weld cap焊帽weld center line焊缝中心线weld collar加强焊缝焊瘤weld crack焊接裂纹weld crater熔池weld crosswise交叉焊接weld decay焊缝腐蚀; 焊接接头晶间腐蚀; 焊接侵蚀; 焊接区晶间腐蚀weld decay (焊接后)敏化区腐蚀weld defect焊接缺陷weld delay time焊接延迟时间weld deposit堆焊weld deposits cleaning焊接熔敷金属清理weld edge焊缝边缘; 焊缝表面边缘weld edgewise沿边焊接weld flange connection焊接法兰连接weld flash焊瘤weld flaw焊接缺陷weld flush焊缝隆起weld fumes焊接烟尘weld gage焊缝检查规; 焊缝卡规weld gauge焊缝量规weld heat input焊接热输入; 焊接线能量weld holder焊接夹持架; 焊接架weld inspection焊缝质量检验; 焊接检查weld interface焊缝界面; 焊接界面weld interval焊接时间weld is accepted焊缝合格weld jig焊接夹具weld joint焊缝weld junction熔焊线; 熔合线weld layer焊接层weld length焊缝长度weld line焊缝线; 焊缝轴线; 焊接线; 焊线weld machined flush削平补强的焊缝weld mark焊缝符号; 焊缝记号; 焊接痕; 熔缝weld mesh crate焊接网格weld metal焊缝金属; 焊接金属weld metal buildup surface金属堆焊表面weld metal composition焊接金属组成weld metal cracking焊缝裂纹weld metal zone焊缝金属区; 焊接金属熔化区weld nugget焊点熔核weld on bottom底焊weld overlap重叠区weld pass焊接通道weld penetration焊缝熔深; 焊透深度weld period焊接时间weld pitch焊缝距weld porosity焊缝气孔weld preheating焊前预热weld preparation焊缝坡口加工weld puddle熔池weld reinforcement焊缝补强; 焊缝加强; 焊接补强weld repairs焊接修补weld ripple焊缝波纹weld root焊件剖口; 焊接根weld root opening gap焊缝根部间隙weld root reinforcement焊缝反面加强weld rotation焊缝转角weld seam pipe焊缝管weld shape焊缝形状weld shielding焊接区保护; 焊接熔池保护weld slope焊缝倾角weld spacing焊点距; 焊缝间距weld strain焊接应变weld strength焊接强度weld surface焊缝表面weld swell焊缝隆起weld thermal cycle焊接热循环weld thickness焊缝厚度weld time焊接时间; 焊接通电时间; 接触焊通电时间weld toxic gases焊接有害气体weld trimmer焊缝清理机weld up焊补weld wheel conditioner焊轮调节器weld width焊缝宽度weld wire包铜钢丝weld zone焊缝区; 焊接区weld-form factor焊缝形状系数weld-fusion line焊缝熔合线weld-in nozzle焊入式喷嘴weld-interval timer焊接间隔记时器weld-shrunk cylinder包扎式圆筒weld-shrunk multilayered cylinder包扎式多层圆筒; 多层包扎式圆筒weld-throat thickness depth焊缝厚度window type restraint weld cracking test窗口拘束焊缝抗裂试验; 窗形拘束抗裂试验zigzag intermittent fillet weld锯齿形断续角焊缝; 锯齿形断续角焊缝zone of weld焊缝表面AC & D. C. arc welding machine交直流弧焊机AC arc welding交流电弧焊AC gas metal-arc welding process交流熔化极气保护焊AC gas tungsten arc welding交流钨极气保护焊AC welding set交流焊机; 交流焊接变压器AC-dc welding machine交直流两用焊机acetylene welding气焊; 乙炔焊; 乙炔焊接acetylene welding torch乙炔焊炬; 乙炔接焊吹管air-acetylene welding空气-乙炔焊接all-position welding全位置焊接alloy steel gas welding rod合金钢气焊条alternating current arc welding交流电弧焊alternating current welding machine交流电焊机aluminium alloy arc welding electrode铝合金焊条aluminothermic welding铝热焊; 铸焊angle backwards welding后倾焊angle butt welding斜口对接焊angle forwards welding前倾焊annealing welding wave退火焊波antogenous welding氧炔焊apparatus for butt welding平接压焊夹具arc braze welding电弧钎焊arc flash welding电弧闪光焊arc spot welding电铆焊arc stud welding柱钉电弧焊; 螺柱电弧焊arc voltage feedback controlling arc welding弧压反馈电弧焊arc welding电弧焊; 电弧焊接; 弧焊arc welding electrode电弧焊条arc welding generator电弧焊接用发电机; 弧焊发电机arc welding generator with independent excitation自激弧焊发电机; 他激电焊发电机arc welding generator with self-excitation自激电焊发电机arc welding machine弧焊机; 电焊机; 电弧焊机arc welding mask电弧焊遮罩arc welding process电弧焊接工艺过程arc welding rectifier弧焊整流器arc welding robot弧焊机器人arc welding set电弧焊机组arc welding transformer弧焊变压器arc-welding electrode电弧焊用焊条arc-welding plant电焊厂arcogen welding电弧氧乙炔焊argon (shielded) arc welding氩弧焊接argon tungsten-arc welding钨极氩弧焊argon-arc welding氩弧焊argonaut welding自动氩弧焊atomic H welding氢原子焊atomic hydrogen welding原子氢焊atomic-hydrogen welding原子氢焊接austenite welding不锈钢焊接autogenous pressure welding自动压合热焊autogenous welding气焊automatic arc welding head自动电弧焊接机头automatic arc welding machine自动电焊机; 自动弧焊机automatic drying line for welding electrode电焊条自动烘焙线automatic slag pool welding自动电渣焊automatic spot welding自动点焊automatic submerged arc welding自动埋弧焊automatic submerged slag welding of rail钢轨automatic submerged-arc welding machine埋弧自动焊机automatic transverse welding横向自动焊automatic welding自动焊; 自动焊接automatic welding head自动焊头automatic welding machine自动焊接机automatic welding of circumferential seams环缝自动焊automatic welding process自动焊接工艺规程automation of welding焊接自动化back hand welding后退焊; 反手焊接back step welding反手焊接back ward welding反手焊接back welding底焊; 退焊法back-step welding分段退焊法backhand welding逆向焊; 右焊法; 后焊法; 向后焊backing welding打底焊backstep welding分段逆焊; 分段退焊; 反向焊; 逐步退焊法; 逆向焊backstep welding sequence分段退焊次序backward welding后倾焊; 后退焊; 向右焊balanced welding对称焊bare welding rod光焊条bare wire arc welding光焊丝电弧焊bead welding窄焊道焊接bench arc welding machine台式弧焊机bevel welding斜角焊blacksmith welding锻工焊接; 锻焊block sequence welding分段多层焊; 分段连续焊接block welding块焊接block welding sequence分段多层焊body welding machine罐身焊接机both sides welding双面焊接brass welding rod黄铜焊条braze welding钎焊; 钎焊接; 钎接; 铜焊braze-welding钎接焊bridge spot welding带接合板点焊; 单面衬垫点焊; 单面搭板点焊bridge welding桥接焊; 盖板焊brize welding硬焊build (built) up welding堆焊build-up welding堆焊building-up by welding堆焊butt resistance welding电阻对焊; 对接电阻焊butt seam welding对接滚焊butt seam welding machine对接缝焊机butt welding对接焊; 平对焊butt welding machine对接焊机butt welding process对接焊法butt-welding对接焊butt-welding machine对焊机capability of welding vertically upwards直上焊接能力capacitor-discharge welding电容放电焊接carbon arc welding碳弧焊; 碳极弧焊carbon in materials for welding焊接用材料中的碳carbon-dioxide arc welding二氧化碳保护焊carriage of automatic welding machine自动焊机走架cascade welding阶梯式焊; 山形多层焊cascade welding sequence串级叠置法cast welding铸焊cement-welding金属陶瓷焊接centralized installation of welding machine多站焊接chain intermittent fillet welding并列断续角焊缝; 链式断续角焊chemical welding化学焊circular seam welding环缝对接焊circular seam-welding machine环形滚焊机cleaning before welding焊接前的清理cleaning of welding deposits焊接沉积的清理closed butt gas pressure welding闭式加压气焊cold welding冷焊; 冷压焊cold-pressure welding冷压焊combined cutting and welding torch焊割两用炬combined cutting and-welding blow-pipe焊割两用炬combined thermit welding加压铸焊complete penetraction and fusion in welding全焊透condenser (discharge) spot-welding machine电容器放电点焊机condenser discharge spot welding电容储能点焊; 电容贮能点焊constant current welding machine恒流电焊机constant energy welding machine恒功率电焊机constant voltage welding machine恒压电焊机constant-current arc welding power source垂降特性弧焊电源constant-current welding source恒流式焊接电源constant-power welding source恒功率式焊接电源constant-pressure pressure welding恒压压力焊constant-temperature pressure welding恒温压力焊constant-voltage welding machine恒电压焊机constant-voltage welding source恒压式焊接电源; 平特性焊接电源consumable electrode welding熔化极电弧焊consumable guide electroslag welding自耗定向电渣焊contact welding接触焊continuous feed welding连续送丝电弧焊continuous welding连续焊; 连续焊接contour welding绕焊controlled arc welding可控电弧焊接controlled atmosohere arc welding充气室电弧焊controlled atmospere arc welding充气式电弧焊controlled tungsten-arc welding自动控制弧长的钨极电弧焊controlled-transfer welding可控过渡电弧焊convex fillet welding凸面角焊缝copper arc welding electrode铜焊条copper welding rod铜焊条copper-alloy arc welding electrode铜合金焊条copper-aluminium welding rod铜铝焊条copper-nickel welding rod铜镍焊条copper-silicon welding rod铜硅焊条copper-tin welding rod铜锡焊条copper-zinc welding rod铜锌焊条core welding-wire焊芯core wire for welding rod焊条芯线corrosion due to welding焊接腐蚀cosmetic welding盖面焊cover chain welding链节式药皮包丝焊接CO 2 arc welding machine二氧化碳弧焊机cracking test for automatic welding自动焊抗裂试验crankshaft flashbutt welding曲轴电阻弧花压焊cross welding横向焊缝cyc-arc welding圆环电弧焊deck welding重力焊deep fillet welding深角焊deep penetration welding深熔焊deep penetration welding electrode深熔焊条deep welding深焊die welding模焊; 冲模堆焊diesel engine driven DC arc welding machine柴油机驱动直流弧焊机differential-excited welding generator差激电焊发电机diffusion welding扩散焊接direct spot welding双面点焊direct welding双面点焊direction of welding焊接方位; 焊接方向discontinuous welding断续焊dot welding点焊double carbon-arc welding间接碳弧焊double side welding双面焊接down-hand welding俯焊downhand welding平焊downward welding in the inclined position下坡焊downward welding in the vertical position向下立焊dual-arc welding双弧焊edge seam welding端面接头滚焊edge welding边缘焊接edgewise welding沿边焊接electric and pressure welding电压力焊接electric arc spot welding电弧点焊electric arc welding generators电弧焊接发电机electric arc welding machine电弧焊机electric butt welding电阻接触焊electric resistance welding电阻焊接; 热电阻焊electric slag welding电渣焊electric spot welding电点焊electric welding电焊electric welding cast copper solder铸铜电焊条electric welding equipment电焊设备electric welding generator电焊发电机electric welding hammer电焊锤electric welding machine电焊机electric welding plant电焊厂electric welding pliers电焊钳electric welding rod电焊条electric welding strip电焊片electric-arc welding电弧焊electric-resistance seam-welding电阻缝焊electric-resistance seam-welding machine电阻缝焊机electrical arc welding电弧焊接electrical resistance welding tube电阻焊接管electrically heated welding torch电热焊枪electro-beam welding电子束焊接electro-gas (enclosed) welding气电立焊electro-slag welding电磁渣焊; 电渣焊electro-slag welding with plate electrode板极电渣焊electro-welding电焊electrode for arc welding电焊条; 电弧焊条electrode for vertical down welding向下立焊条electrode of vertical down welding立向下焊条electrode welding电弧焊electrogas welding气电焊; 电气焊electromagnetic percussive welding电磁冲击焊electromagnetic stored energy welding电磁储能焊electron beam welding电子束焊; 电子束焊接electron beam welding machine电子束焊接机electron-beam welding电子束焊接electron-beam welding machine电子束焊机electron-bombardment welding真空电子束焊electrons leaves welding电子束焊接electropercussive welding电冲击焊; 冲击焊; 储能焊electroslag welding电渣焊; 电阻焊electroslag welding machine电渣焊机electroslag welding with consumable nozzle熔嘴电渣焊electroslag welding with wire electrode丝极电渣焊electrostatic (percussive) welding电能储能焊接electrostatic percussing welding静电焊; 静电焊; 冲击焊; 储能焊electrostatic percussive welding静电冲击焊; 静电冲击焊enclosed welding强制成形焊接energy storage welding贮能焊; 储能焊; 脉冲焊接erecting welding装配焊接erection welding安装焊接eutectic welding低温焊exothermic welding铝热焊expanding or welding of tube with tubesheet管子与管板的胀接或焊接explosive welding (EW)爆炸焊eyelet welding孔焊; 小孔熔焊faster welding快速焊接feed rate of welding wire焊丝送进速度field of welding temperature焊接温度场field welding现场焊接; 工地焊接Filler arc welding菲拉电弧焊距fillet welding (填角焊)贴角焊fillet welding in the downhand position船形角焊fillet welding in the flat position船形焊fillet welding in the horizontal position横角焊fillet welding in the vertical position立角焊fine welding精密焊接fine wire welding细丝焊fire cracker welding躺焊fire welding锻焊; 锻接fixed welding machine固定式焊机fixed-position welding定位焊接flame welding熔气焊flare welding喇叭形坡口焊接flash butt welding闪光对焊; 闪光对接焊wire welding焊网flash welding闪光电弧焊; 闪光焊; 闪焊; 火花电弧焊; 火花对焊flash-butt welding电阻闪光焊接flashover welding闪光焊flat position welding平焊; 顶面平卧焊flat position welding of fillet weld角焊缝平焊; 船形角焊flat welding平卧焊flexible welding rod软焊条flexible wire for electric welding电焊软线flow welding流注焊接; 浇焊fluid welding流焊flux-cored welding包芯焊条焊接fly-wheel type friction welding贮能摩擦焊; 储能摩擦焊flywheel friction welding惯性摩擦焊forehand welding向前焊; 向左焊; 左焊法; 左向焊; 正手焊forge welding锻焊; 锻接焊forward welding正手焊; 左焊法; 左向焊; 前进焊; 前倾焊; 向前焊friction welding摩擦焊; 摩擦焊接friction welding machine摩擦焊接机frontal fillet welding正面角焊full automatic welding全自动焊full-automatic arc welding全自动电弧焊full-fillet welding满角焊full-fusion thermit welding热剂铸焊full-fusion welding全熔合焊full-length welding满焊fusion pressure welding熔化压接fusion thermit welding热剂熔焊; 熔化铝热焊fusion type plasma arc welding熔透型等离子弧焊fusion type welding熔透型焊接法fusion welding熔焊接fusion welding metal熔焊金属gas carbon-arc welding气保护碳弧焊gas electric welding气电联合焊接gas metal arc welding气体保护金属极电弧焊gas metal-arc welding气保护金属极电弧焊gas shield welding气体保护弧焊gas shielded arc welding气体保护电弧焊; 气体保护焊gas shielded arc welding machine气保护弧焊机gas shielded arc-welding machine气体保护弧焊机gas shielded magnetic flux arc welding磁性焊剂气体保护电弧焊gas shielded metal-arc welding气体保护金属弧焊gas shielded welding气体保护焊gas torch welding气炬焊gas tungsten arc welding气体保护钨极电弧焊gas tungsten-arc welding气保护钨极电弧焊gas tungstun arc welding钨极气体保护焊gas welding气焊; 乙炔焊gas welding device气焊设备gas welding equipment气焊设备gas welding machine气焊机gas welding outfit气焊机gas welding rod气焊焊丝gas welding rubber hose气焊橡胶管gas welding technique气焊工艺gas welding torch butt气焊进气硬管gas welding tube mill瓦斯焊接机gas welding work气焊工作gas-arc welding气电焊; 气体保护电弧焊gas-arc welding gun气电焊焊嘴gas-press welding气压焊gas-pressure welding machine气压焊接机gas-shielded stud welding气保护柱钉焊接girth welding环缝横向焊接gravity type arc welding重力焊gravity type welding倚焊gravity welding重力焊; 重力式电弧焊groove welding槽焊; 坡口焊; 开槽焊guided automatic welding导向自动焊接gun welding machine手提式点焊机; 点焊枪hafnium welding wire铪焊丝hammer welding锻焊; 锻接; 锤焊hammered resistance welding锤锻电阻焊; 电阻加热锻焊hand welding holdet手焊焊把hard-welding硬质合金熔焊headless bolt for welding焊接单头螺栓heat-welding adhesive热熔性胶粘剂heated-tool welding热烙铁焊接heavy welding大断面焊接heavy welding electrode粗电焊条heliarc welding氦电弧焊Heliarc welding氦弧焊法helium arc welding氦弧焊HF welding magnetic bar高频焊接磁棒hidden arc welding埋弧焊; 潜弧焊high current arc welding大电流弧焊high frequency AC welding machine高频交流电焊机high frequency dielectric welding高频介电焊high frequency induction welding高频感应焊high frequency welding高频焊接high grade energy welding高能焊high tensile electric welding rod高强焊条high-current plasma arc welding大电流等离子弧焊high-frequency induction welding高频感应焊接; 高频焊接high-frequency resistance welding高频接触焊high-frequency resistance welding (HFRW)高频电阻焊high-frequency welding高频电焊highspeed welding快速焊接horizontal fillet welding横角焊; 水平角焊horizontal position welding水平焊接; 横焊horizontal welding横焊; 水平焊horizontal-position welding水平位置焊接horizontal-rolledposition welding水平转动焊接; 滚动水平焊hot jet welding热风焊接hot press welding热压焊接hot pressure welding预热压力焊hot welding热焊hot wire welding热丝焊hot(-)gas welding热气焊接hot-gas welding热风焊接; 热空气焊接hot-pressure welding热压焊; 热压焊接hydrogen-welding氢焊impact spot welding冲击点焊法impregnated-tape metal-arc welding浸焊条金属弧焊impulse current automatic butt welding machine脉冲电流自动对焊机impulse current seam welding machine脉冲电流缝焊机impulse current semiautomatic butt welding machine脉冲电流半自动对焊机impulse electromagnetic automatic welding machine电磁脉冲自动焊机impulse plasma welding machine脉冲等离子焊机impulse welding脉冲焊; 脉冲焊接impulsed spot welding脉冲点焊inclined position welding倾斜焊indirect (spot) welding单面点焊indirect welding单面点焊induction welding感应焊; 感应焊接; 感应熔焊inert gas arc spot welding惰性气体电弧点焊inert gas arc welding惰性气体电弧焊inert gas spot welding惰性气体保护电弧点焊inert gas welding惰性气体焊接法inert-gas (inert gas) arc welding惰性气体保护焊inertia welding惯性焊接; 贮能摩擦焊; 储能摩擦焊inertial welding惯性焊接infrared welding红外线焊接intermediate current plasma arc welding中电流等离子弧焊intermittent fillet welding断续角焊intermittent point welding断续点焊intermittent welding断续焊International Institute of welding (IIW)国际焊接学会inverted welding仰焊joint welding搭焊jump welding丁字形焊keyhole-mode welding小孔型等离子弧焊; 穿透型焊接法lap fillet welding搭角焊; 搭接角焊lap resistance welding搭接电阻焊lap seam welding搭接缝焊; 搭接焊lap welding搭焊; 搭接焊laser welding激光焊接laser welding chamber激光焊接室laser welding head激光焊接头laser welding machine for orthodontics激光口腔矫形焊接机laser welding system激光焊接系统laser-beam welding machine激光焊接机laser-welding machine激光焊接器lead welding铅焊lefthand welding左焊法leftward welding左向焊法lever gun welding head杠杆式点焊钳light beam welding machine光束焊机light continuous welding轻连续焊接light gauge welding薄板焊接light ray welding光束焊接light welding轻焊接Linde welding林德钢管对焊法line welding直线焊缝焊接liquid metal welding浇注补焊longitudinal resistance seam welding纵向电阻缝焊longitudinal seam welding纵缝焊接; 纵向缝焊longitudinal welding纵缝焊接; 纵向焊接low carbon steel welding electrode低碳钢电焊条low carbon welding wires低碳焊接线材low idle voltage arc-welding power supply低空载电压的弧焊电源low temperature welding低温焊接low-alloy steel covered arc welding electrode低合金钢焊条low-current plasma arc welding小电流等离子弧焊low-hydrogen welding electrode低氢型电焊条low-temperature welding低温焊接lowest permissible temperature for welding焊接允许的最低温度machine for magnetic welding磁力焊接机machine welding机器焊接machine welding torch机械焊接吹管magnetic discharge welding电磁储能焊; 电磁焊magnetic flux arc welding磁性焊剂电弧焊magnetic flux gas shielded arc welding磁性焊剂气体保护电弧焊magnetic force welding machine磁力焊接机magnetic-force welding磁力焊接法manual arc welding手工电弧堆焊manual electic arc pile up welding手工电弧堆焊manual electric arc welding手工电弧堆焊manual electro-slag welding手工电渣焊manual gas welding手工气焊manual metal-arc welding手弧焊manual TIG welding手工钨极惰性气体保护焊manual welding手工焊接; 人工焊接manual welding machine手工焊机manually coating welding electrode手涂焊条mash seam welding滚压电阻缝焊mash stitch welding多针缝式焊接mask welding电焊眼罩match assemble welding装架焊接metal arc welding金属电弧焊metal buried welding埋渣焊metal inert gas arc welding (MIG)惰性气体金属电弧焊metal inert-gas arc welding金属极惰性气体保护焊metal inertia gas welding金属焊条惰性气体保护焊; 熔化极惰性气体保护焊metal rectifier welding set整流焊机metal-arc gas-shielded welding气保护金属极电弧焊metal-arc gas-shielded welding (MAGSW)金属极气保护焊metal-arc welding金属极电弧焊micro resistance welding显微电阻焊micro-gap welding微间隙焊接micro-plasma arc welding微束等离子弧焊micro-welding微型焊接; 显微焊接microgap welding微隙间隙焊Miebach high efficiency flash welding machine米巴赫高效闪光对焊机mild steel arc welding electrode低碳钢焊条mild steel welding rod低碳钢焊丝miter welding斜接头焊接mixed gas arc welding混合气体保护电弧焊molten bath arc welding熔池电弧焊molten-bath arc welding熔池焊motor driven welding machine电动焊机; 电动机拖动式焊机motor-driven welding machine电动旋转式焊机motor-generator welding unit电动直流发电焊接设备multi-head automatic arc-welding machine多头自动电弧焊机multi-head automatic welding machine多头自动焊机multi-operator welding set多站电焊机multi-pass (multiple pass) welding多道焊multiarc welding多弧焊multihead automatic arc welding machine多弧自动电焊机multilayer welding多层焊multioperator welding generator多工位焊接发电机multioperator welding machine多站电焊机; 多站焊机multioperator welding set多站焊机multipass welding多道焊接multiple arc welding多弧焊multiple operator arc welding machine复式弧焊机multiple projection welding多点凸焊multiple resistance welding多点电阻焊接; 复式电阻焊multiple spot welding多点点焊multiple spot welding machine多点点焊机multiple-arc welding plant多弧焊接机multiple-electrode spot welding machine多极点焊机multiple-electrode welding多焊条焊接multiple-impulse welding多脉冲焊; 多脉冲接触焊multiple-operator welding-unit多重操作焊接单元multiple-spot welding多点焊multiple-wire multiple-power submerged-arc welding多丝埋弧焊multiple-wire submerged arc welding多丝埋弧焊multiplewire submerged-arc welding多丝埋弧焊nail head type welding钉头式焊接narrow gap one side welding窄间隙单面焊narrow gap one-side automatic welding窄间隙单面自动电弧焊narrow gap welding窄间隙焊接; 狭间隙焊negative polarity welding反极性焊接neli-arc welding氦电弧焊nickel bare welding filter metal镍焊丝nickel covered welding eleetrode镍药皮焊条nickel steel gas welding rod镍钢气焊条nickel-base alloy bare welding filler metal镍基合金焊丝nitrogen-arc welding氮弧焊。
英汉无损检测专业词汇汇编
英汉无损检测专业词汇汇编夏纪真编Aablution 清洗Absorbed dose 吸收剂量Absorbed dose rate 吸收剂量率 A.C magnetic saturation 交流磁饱和acceptance specification 验收规范Acceptanc limits 验收范围Acceptance level 验收水平验收标准Acceptance standard 验收标准Accessories 附件配件辅助设备辅助器材Accumulation test 累积检测Accuracy 精确度准确度acetone 丙酮Acoustic emission count 声发射计数Acoustic emission transducer 声发射换能器Acoustic emission (AE) 声发射Acoustic holography 声全息术Acoustic impedance 声阻抗Acoustic impedance matching 声阻抗匹配Acoustic impedance method 声阻法Acoustic wave 声波Acoustic-ultrasonic 声-超声（AU）Acoustical lens 声透镜across 交* 横过Activation 活化Activity 活度Adequate shielding 适当防护、适当屏蔽address: 地址: additional stress 附加应力AE 声发射air header 集气管air set 空气中凝固, 常温自硬自然硬化air supply 气源aisle 过道走廊alkaline battery 碱性电池alarm level 报警电平alarm condition 报警状态Alignment 对准定位调整校直allowable variation 允许偏差容许变化alternating current 交流电aluminum powder 铝粉amount 数量Ampere turns 安匝数amplifier panel 放大器面板Amplitude 振幅、幅度anchor bolt 锚定螺栓地脚螺栓analyzer 分析器Angle beam method 斜射法、角波束法Angle beam probe 斜探头、角探头Angle of incidence 入射角Angle of reflection 反射角Angle of spread 扩散角Angle of squint 偏向角、偏斜角Angle probe 斜探头、角探头Angstrom unit 埃(长度单位) angle square 角尺angle iron 角钢角铁angle steel 角钢angle fitting 弯头application drawing 操作图应用图arc welding 电弧焊arc cutting 电弧切割arc gouging 电弧刨削arc starting 起弧Area amplitude response curve 面积振幅响应曲Area of interest 评定区、关注区域线argon arc welding 氩弧焊Arliflcial disconlinuity 人工不连续性、人工缺陷arrangement diagram 布置图arrival time interval（Δtij）到达时间差(Δtij) Artifact 人为缺陷Artificial defect 人工缺陷A-scan A型扫描A-scope A型显示assembly 装配Attenuation coefficient 衰减系数Attenuator 衰减器Audible leak indicator 音响泄漏指示器Automatic testing 自动检测Autoradiography 自动射线照相术automatic temperature recorder 温度自动记录器axonometric drawing 轴测图axiality 同轴度轴对称性Bback-feed 反馈background target 目标本底backwall echo 底波底面回波baiting valve 放料阀banjo fixing 对接接头band plate 带板Barium concrete 钡混凝土Barn 靶Base fog 片基灰雾Bath 槽液、浴池、槽base material 基底材料Bayard-Alpert ionization gage B-A型电离计Beam 声束、光束Beam ratio 光束比Beam angle 波束角、束张角Beam axis 声束轴线Beam path location 声程定位、声束路径位置Beam path 声程、声束路径Beam spread 声束扩散bellow type 波纹管式beveled edges 坡口Bending 挠曲弯曲beveling 磨斜棱磨斜边成斜角bending deformation 挠曲变形弯曲变形Betatron 电子感应加速器Bimetallic strip gage 双金属片计Bid 投标出价bend 弯管弯头弯曲Bipolar field 双极磁场Black light filter 黑光滤波器、黑光过滤片bisectrix 等分线Black light 黑光，紫外光Blackbody 黑体Blackbody equivalent temperature 黑体等效温Bleakney mass spectrometer 波利克尼质谱仪度blowhole 喷水孔通风孔通气孔(气)孔铸孔砂[气]眼气泡Bleedout 渗出、漏出blind 挡板窗帘blinding plate 盲板blind plate 隔离盲板盲板block up 封堵垫高bolt 螺栓螺钉bolton 螺栓紧固bonding wire 接合线焊线boost pressure 升压bottom plate 底板Bottom echo 底波底面回波both sides welding 双面焊接Bottom surface 底面Boundary echo 边界回波、界面回波Brand name 商标名称品牌branch connection 分支接续分支连接Bremsstrahlung 轫致辐射Broad-beam 宽射束宽（声、光）束bridge 桥breaking of contact 断接卡Brush application 刷涂B-scan presentation B型扫描显示B-scan B型扫描B扫描B-scope B型显示buckling deformation 翘曲变形buckle 满扣扣住buried depth 埋深butt joint 对接butt jointing 对接接头burn through 烧蚀烧穿butt weld 对接焊缝butt welding 对接焊bus duct 母线槽CC-scan C型扫描C扫描C-scope C型显示C-shape detector C型探测器（X射线实时成像）cable fitting电缆配件cable routing电缆路由选择cable gland 电缆衬垫cable tray 电缆盘cable armor 电缆铠装Cable sheath 电缆包皮层cable testing bridge 电缆测试电桥cable laying 电缆敷设cable channel 电缆槽电缆管道cable trunk 电缆管道电缆主干线Capping ends 顶盖末端calculation sheet 计算书calorimeter 热量计Calibration instrument 校准仪器Capillary action 毛细管作用carbon steel tube 碳钢管carbon steel 碳钢Carrier fluid 载液Carry over of penetrate 渗透剂转入cascade connection 串联连接Cassette 暗盒Cathode 阴极cathodic protection system 阴极保护系统caulking metal 填隙合金[金属](材料) CCD Camera 电荷耦合摄像机center line 中心线center plate 中心板拨盘centralized 集中的cement lined piping 水泥衬里管线channel bases沟渠基底center bearing bracket 中心支架certification of fitness 质量合格证书Charge Coupled Device 电荷耦合器件（简称CCD）Central conductor 中心导体中线（三相四线制）Central conductor method 中心导体法centripetal canting pull rope 向心斜拉索channel steel expansion ring 槽钢胀圈Characteristic curve 特性曲线Characteristic curve of film 胶片特性曲线Characteristic radiation 特征辐射标识辐射Chemical fog 化学灰雾check against 检查, 核对chipping 修琢check valve 止回阀chronometer精密计时表Ci 居里Cine-radiography 射线(活动)电影摄影术连续射线照相Circuit breaker断路开关circumferential weld 环焊缝Circumferential coils 圆环线圈Circumferential field 周向磁场环形磁场Circumferential magnetization method 周向磁化法circumferential joint 周圈接缝civil engineer 土木工程师civil works 土建工程建筑工程Clean 清理clamp 夹钳clamping fixture 胎具夹具Clean-up 清除Clearing time 定透时间coaxial cable 同轴电缆cockle stairs 螺旋梯Coercive force 矫顽力Coherence 相干性Coherence length 相干长度（谐波列长度）Coil test 线圈试验Coil size 线圈尺寸Coil spacing 线圈间距Coil technique 线圈技术线圈法Coil method 线圈法Coil reference 线圈参考（参照线圈）Coincidence discrimination 符合性鉴别一致性鉴别cold lap 冷隔Cold-cathode ionization gage 冷阴极电离计collar extension 环口Collimation 准直Collimator 准直器collision 碰撞冲突color identification 彩色识别Combined colour contrast and fluorescent penetrant 着色荧光渗透剂commencement 开始component part 构件(组合)零件部件Compressional wave 压缩波Compressed air drying 压缩空气干燥comprehensive analysis and judgement 综合分析判断compression pump 压缩机压气机[泵] compression joint 压接压力接合comply with 遵守company 公司Compton scatter 康普顿散射condensation 冷凝conduit box [电]导管分线匣conducting wire 导线conductive paste 导电膏conduit outlet 电线引出口conduit entry 导管引入装置connector 接线器连接器Console 控制台construction work 施工工程content gauge 液位计contactor 触头接触器触点开关Contact pads 接触垫Continuous emission 连续发射Continuous linear array 连续线性阵列Continuous method 连续法Continuous spectrum 连续谱Continuous wave 连续波Continuously Welded (CW) 连续焊Contrast stretch 对比度扩展Contrast 对比度衬度Contrast agent 对比剂造影剂Contrast aid 反差增强剂Contrast sensitivity 对比灵敏度Control echo 控制回波Copper intensifying screens 铜增感屏control 控制控制器control wiring 控制线路control cable控制电缆操纵索control console 控制台control unit 控制单元control valve actuator 阀控传动机构control valve控制阀convenience receptacle 电源插座core rod 芯棒corresponding 相应的cotton fibre 棉质纤维Couplant 耦合剂Coupling 耦合Coupling medium 耦合介质Coupling losses 耦合损失Cracking 破裂裂纹裂化裂解Creeping wave 爬波蠕变波crate 板条箱柳条箱Critical angle 临界角Cross section 横截面Cross talk 串音Cross-drilled hole 横孔Crystal 晶片晶体Curie point 居里点cubicle 室,箱cushion 垫层衬垫Curie temperature 居里温度Curie(Ci) 居里Current flow method 通电法电流法Current induction method 电流感应法current attenuation 电流衰减Current magnetization method 电流磁化法Cut-off level 截止电平Cutting 切割cutting opening 切孔切开CW (Continuously Welded) 连续焊DDark room packing 暗室包装（在暗室条件下将X射线胶片装入暗盒）data logger 数据记录器datum mark 基准点Dead zone 盲区死区Decay curve 衰变曲线Decibel(dB) 分贝Defect 缺陷Defect resolution 缺陷分辨力Defect detection sensitivity 缺陷探测灵敏度Definition 清晰度定义Demagnetization 退磁Demagnetization factor 退磁因子退磁系数Demagnetizer 退磁装置退磁器Densitometer 黑度计密度计Density 黑度（底片）密度Density Strip 黑度比较片密度比较条Density comparison strip 黑度比较片密度比较depth scan 深度扫描条description 说明描述design pressure 设计压力Detecting medium 检验介质Detergent remover 洗净液去垢剂Developer 显像剂显影剂Developer station 显像工位显影台Developer aqueous 水性显像剂Developer dry 干式显象剂Developer liquid film 液膜显象剂Developer nonaqueous（suspend）非水（悬浮）显象剂Developing time 显像时间显影时间Development 显影differential discriminator (电子)差动式鉴频器Diffraction mottle 衍射斑点衍射斑纹Diffuse indications 扩散指示Diffusion 扩散漫射Digital image acquisition system 数字图像采集系统Digital display 数字显示数显Dilatational wave 膨胀波疏密波Digital timer for darkroom 暗室用计时器（在暗室中可调及报警）Digital Thermometer 数字温度计（用于测定胶片处理液的温度）dimensional inspection 尺寸检验digital detector 数字探测器（X射线实时成像）Dip and drain station 浸渍和流滴工位浸渍与滴落台Direct contact magnetization 直接接触磁化Direct exposure imaging 直接曝光成像Direct contact method 直接接触法directional beam 定向辐射（指定向辐射的工业X射线机）Directivity 指向性disassembly and assembly 拆装Discontinuity 不连续性Distance-gain-size DGS曲线（距离-增益-尺寸曲线）（DGS德文为AVG）Distance marker 距离标志distribution board 配电盘, 配电屏Dose equivalent 剂量当量dosimeter 剂量计Dose rate meter 剂量率计Dosemeter 剂量计Double crystal probe 双晶探头Double probe technique 双探头法doubleskin 重皮dose 剂量Double transceiver technique 双发双收法Double traverse technique 双光路技术down lead 引下线Dragout 废酸洗液Drain time 滴落时间排液时间drain 排水管排水沟排水道排水draught 气流drying 烘干Drift 漂移Dry method 干法Dry powder 干粉Dry technique 干法Dry developer 干式显像剂Dry developing cabinet 干式显像柜Drying oven 干燥箱干燥炉Drying station 干燥工位干燥台Drying time 干燥时间D-scan D型扫描D-scope D型显示dual element transducers 双晶探头双晶片换能器Dual search unit 双探头双探测装置双探测器Dual-focus tube 双焦点(X射线)管due date 到期日预定日期duplicate part 备件Duplex-wire image quality indicator 双线像质指示器双线像质计Duplex wire type Image Quality Indicator 双线型像质指示器双线像质计Duration 持续时间Dwell time 停留时间Dye penetrant 着色渗透剂dye penetrant examination 着色渗透检验Dynamic leak test 动态泄漏检测Dynamic leakage measurement 动态泄漏测量Dynamic range 动态范围Dynamic radiography 动态射线照相法Eearth wire 接地线地线earthing device 接地装置earthing pole 接地极earth resistance 接地电阻Echo 回波Echo frequency 回波频率Echo height 回波高度Echo indication 回波指示Echo transmittance of sound pressure 声压往复透过率Echo width 回波宽度Eddy current 涡流涡电流Eddy current flaw detector 涡流探伤仪Eddy current testing 涡流检测Edge 边缘棱边Edge effect 边缘效应Edge echo 棱边回波Effective focus size 有效焦点尺寸Effective depth penetration （EDP）有效穿透深度有效透入深度Effective magnetic permeability 有效磁导率Effective resistance 有效电阻Effective permeability 有效磁导率有效渗透率相对渗透率Effective reflection surface of flaw 缺陷有效反射面Elastic medium 弹性介质elbow 弯管接头管肘Electric displacement 电位移electric heat tracing 电伴随加热electric force compounded grease 电力复合脂electric pressure 电压electric machine 电机electrified 带电Electrical center 电中心Electrode 电极电焊条electrical panel 配电板,配电盘electrical material电气材料electrical appliance 电器Electromagnet 电磁铁electron linear accelerator 电子直线加速器Electrolytic Sliver recovery unit 电解银回收装置（从定影液中回收银）Electro-magnetic acoustic transducer 电磁声换能器Electromagnetic induction 电磁感应Electromagnetic radiation 电磁辐射Electromagnetic testing 电磁检测Electro-mechanical coupling factor 机电耦合系数Electron radiography 电子辐射照相术Electron volt 电子伏恃Electronic noise 电子噪声Electrostatic spraying 静电喷涂Emulsification 乳化E-mail: 电子邮件: 电子邮箱: embedded part 预埋件嵌入[埋置]部分Emulsification time 乳化时间Emulsifier 乳化剂emission count （声）发射计数Encircling coils 环形线圈End effect 端部效应端点效应Energizing cycle 激励周期enfoldment 折迭end socket 端头, (钢索的)封头envelope 包络包迹Equalizing filter 均衡滤波器平衡滤波器equipment 器材设备Equivalent 当量Equivalent I.Q.I. Sensitivity 当量象质指示器灵敏度Equivalent nitrogen pressure 等效氮压当量氮气压力Equivalent method 当量法Equivalent penetrameter sensifivty 当量透度计灵敏度erection 架设Erasabl optical medium 可消光介质Etching 浸蚀腐蚀侵蚀蚀刻Evaluation 评定Evaluation threshold 评价阈值评定阈Event count 事件计数Event count rate 事件计数率examination 试验检验考试examine and approve 审批Examination area 检验范围Examination region 检验区域exfoliation 剥落脱落Exhaust pressure/discharge pressure 排气压力/排放压力出口压力输送压力Exhaust tubulation 排气管道Expanded time-base sweep 时基线展宽时基扫描扩展expansion joint 伸缩接头expansion bolt 伸缩栓, 扩开螺栓Exposure 曝光Exposure table 曝光表Exposure chart 曝光曲线Exposure fog 曝光灰雾Exposure 曝光Extended source 扩展源延长源external diameter 外径eye survey 目测Ffabrication tolerance 制造容差fabrication 加工制造fabrication drawing 制造图纸制作图fall off 脱落Facility scattered neutrons 易散射中子False indication 假指示虚假指示Family 族系列Far field 远场Fast/slow timing Oscilloscope 带快慢调速的示波器Fast neutron detectors 快中子探测器FBH 平底孔(缩写) Fax: 传真:Feed-through coil 穿过式线圈Field 场（磁场、声场）feeder 馈电线field installation 现场安装field instrument 携带式仪表field fabricated 工地制造的现场装配的ferritic 铁素体的Fill factor 填充系数Film speed 胶片速度(胶片感光速度胶片感光度) fillet weld 角焊填角焊filler rod 焊条filler metal 焊料焊丝film density 胶片密度filling water test 充水试验filament 灯丝Film badge 胶片剂量计Film base 片基film cassette 胶片暗盒Film contrast 胶片对比度Film gamma 胶片γ值（胶片灰度系数）Film processing 胶片冲洗加工底片处理Film Hangers for manual processing 洗片架（手工洗片的胶片挂架）Film Hangers （Clip Type）夹式洗片架（手工洗片的一种洗片架类型）Film Hangers （Channel Type）槽式洗片架（手工洗片的一种洗片架类型）Film processing chemicals 胶片处理药品洗片药品Film unsharpness 胶片不清晰度Film viewing screen 胶片观察屏film viewer 底片评片灯观片灯底片观察用光源Filter 滤波器滤光板过滤器Final test 最终检验Fixing 固定fire barriers 防火间隔防火屏障flange joint 凸缘接头flange connection 凸缘联接flange gasket 法兰垫片flange 边缘轮缘凸缘法兰flange sealing surface 法兰密封面Flaw echo 缺陷回波Flat-bottomed hole 平底孔Flat-bottomed hole equivalent 平底孔当量Flaw 伤缺陷瑕疵裂纹Flaw characterization 伤特性缺陷特征flash plate 闪熔镀层Flexural wave 弯曲波flexible conduit 软管flicker-free images 无闪烁图像Floating threshold 浮动阀值Fluorescence 荧光floor slab 楼板flow sheet 流程图flow instrument 流量计flushing 冲洗填缝flux 焊剂Fluorometallic intensifying screen 荧光金属增感Fluorescent examination method 荧光检验法屏Fluorescent magnetic particle inspection 荧光磁粉检验Fluorescent dry deposit penetrant 干沉积荧光渗Fluorescent light 荧光荧光灯透剂Fluorescent magnetic powder 荧光磁粉Fluorescent penetrant 荧光渗透剂Fluorescent screen 荧光屏Fluoroscopy 荧光检查法fluorography 荧光照相术Flux leakage field 磁通泄漏场漏磁场Flux lines 磁通线Focal spot 焦点Focal distance 焦距Focus length 焦点长度聚焦长度Focus size 焦点尺寸聚焦尺寸Focus width 焦点宽度聚焦宽度Focus electron 电子焦点聚焦电子束Focused beam 聚焦束（声束、光束、电子束）Focusing probe 聚焦探头Fog 灰雾Focus-to-film distance(f.f.d) 焦点-胶片距离（焦距）Fog density 灰雾密度Footcandle 英尺烛光formula 公式foundation ring 底圈foundation settlement 基础沉降Freguency 频率Frequency constant 频率常数Fringe 干涉带干扰带条纹边缘Front distance 前沿距离Front distance of flaw 缺陷前沿距离full-scale value 满刻度值Full-wave direct current（FWDC）全波直流Fundamental frequency 基频Furring 毛状迹痕毛皮fusion 熔融熔合fusion arc welded 熔弧焊GGage pressure 表压表压力gage glass 液位玻璃管Gain 增益gamma camera γ射线照相机（γ射线探伤机）gamma equipment γ射线设备Gamma radiography γ射线照相术Gamma ray source γ射线源Gamma ray source container γ射线源容器Gamma rays γ射线Gamma-ray radiographic equipment γ射线照相Gamme ray unit γ射线机γ射线装置装置gamma source γ射线源γ源Gap scanning 间隙扫查间隙扫描Gas 气体gas cutting 气割gas shielded arc welding 气体保护焊Gate 闸门Gating technique 选通技术脉冲选通技术gauge board 仪表板样板模板规准尺Gauss 高斯Geiger-Muller counter 盖革.弥勒计数器generating of arc 引弧Geometric unsharpness 几何不清晰度girth weld 环形焊缝gland bolt 压盖螺栓Goggles 护目镜gouging 刨削槽Gray(Gy) 戈瑞Grazing incidence 掠入射切线入射Grazing angle 掠射角切线角入射余角grind off 磨掉grinder 磨床磨工grinding wheel 砂轮片砂轮grounding conductor 接地导体Group velocity 群速度grouting 灌（水泥）浆guide wire 尺度[定距]索,准绳gusset plate角撑板, 加固板HHalf life 半衰期Half-wave current （HW）半波电流Half-value layer(HVL) 半值层半价层Half-value method 半波高度法半值法Halogen 卤素Halogen leak detector 卤素检漏仪Hard-faced probe 硬膜探头硬面探头hanger 吊架挂架洗片架Hard hat 安全帽Hard X-rays 硬X射线Harmonic analysis 谐波分析Harmonic distortion 谐波畸变Harmonics 谐频谐波head face 端面Head wave 头波heat exchangers 热交换器heat absorbing glass 吸热玻璃Heating boxes 加热箱heat affected area 热影响区heat transfer 热传输Helium bombing 氦轰击法Helium drift 氦漂移Helium leak detector 氦检漏仪Hermetically tight seal 气密密封密封密封装置High vacuum 高真空High energy X-rays 高能X射线high frequency generator 高频发电机highly sophisticated image processing 高度完善的图像处理hoisting upright column 吊装立柱high frequency 高频Holography 全息照相术（光全息、声全息）horizontal line 水平线Hydrophilic emulsifier 亲水性乳化剂Hydrophilic remover 亲水性洗净剂亲水性去除剂Hydrostatic test 水压试验静水压试验Hysteresis 磁滞滞后hydrostatic pressure test静水压试验IIACS =International Annealed Copper Standard 国际退火(软)铜标准ice 冰ice chest 冰箱ice machine 制冰机，冷冻机iconoscope 光电摄像管ID (①inside ②inside dimensions) ①内径②内部尺寸ID coil ID线圈=Inside Diameter 内径线圈Image definition 图像清晰度idea 概念，意见，思想ideal 理想的，想象的identical 同一的，恒定的，相同的identification 鉴定，辨别，验明identification mark 识别标志identifier 鉴别器identify pulse 识别脉冲idiopathetic 自发的，特发的IEM (ion exchange membrane) 离子交换膜I.F. (intermediate frequency) 中频（30～3000千周/秒）illuminance 照（明）度illuminant 照明的，发光的illuminating lamp 照明灯泡illuminating loupe 放大照明镜illuminating mirror 照明镜illumination 照明的，照射illumination apparatus 照明器illumination plate 照明板illuminator ①照明器，照明装置②反光镜illuminometer 照度计illustration(abbr. illus.) 图解，例证，具体说明image amplifier 图像放大器，影像增强器image analysis system 图像分析系统image converter 影像转换器Image contrast 图像对比度影像对比Image enhancement 图像增强image freeze 影像冻结image intensifier 像亮化器，图像增强器image intensifier tube 影像增强管图像增强管image pick-up tube 摄像管Image magnification 图像放大Image quality 图像质量image monitor 图像监视器image multiplier 影像倍增器Image Quality Indicator 像质计像质指示器IQI 像质计像质指示器Image quality indicator sensitivity 像质指示器灵敏度imager 图像仪，显像仪image reproducer 显像管，显像器image quality indication 像质指示Imaging line scanner 图像线扫描器图像行扫描器image store 图像存储器image tube 显像管imagination 想象imagine 想象，推测，设想immediate payment 立即付款immersion 浸没，浸渍Immersion probe 液浸探头Immersion rinse 浸没清洗浸液清洗immersion system 浸渍装置液浸系统Immersion testing 液浸试验Immersion time 浸没时间浸入时间impacter 冲击器impact strength 冲击强度Impedance 阻抗Impedance plane diagram 阻抗平面图impedance matching 阻抗匹配impedance transducer 阻抗传感器，阻抗换能器impeller ①叶轮，转子②压缩机imperial quart 英制夸脱imperial gallon(abbr. ip gal) 英国标准加仑（英制容量单位合4.546升）Imperfection 不完整性缺陷Impulse eddy current testing 脉冲涡流检测import ①进口②输入import and export firm 进出口商行importation ①输入，传入②进口货import border station 进口国境站名import licence position 进口许可证impression 压迹，印模，版impression technic 印模术impression tray 印模盘impulse 冲动，搏动，脉冲impulse generator 脉冲发生器impulse oscilloscope 脉冲示波器impulser 脉冲发生器，脉冲传感器impulse recorder 脉冲自动记录器impulse scaler 脉冲计数器impulse timer 脉冲计数器impulse transmitting tube 脉冲发射管impurity 不纯，杂质In (①indium ②inch) ①铟②英寸（等于25.4毫米）inaction 无作用inadequacy 机能不全，闭锁不全Inc. (incorporated) 股份有限公司incandescent lamp 白炽灯inch(abbr.In;in) 英寸incidence ①入射，入射角②发生率incidental 偶发的，非主要的incident illumination 入射光incident light 入射光incident ray 入射光inclination 倾斜，斜度inclined tube type manometer 斜管式压力计include 包括，计入inclusion 包含包埋杂质incoming line 进线口incompatible 不相容的，禁忌的incompetence 机能不全，闭锁不全inconvertible 不可逆的incorporation ①并入②公司increase 增加，增大，增长indent 订单Incremental permeability 增量磁导率Indicated defect area 缺陷指示面积index ①指数，索引②指针index card 索引卡片indexer 指数测定仪，分度器index hand 指针indicated light 指示灯indicating bell 指示铃indicating lamp 指示灯indicator ①指示器，显示器②指针③指示剂indicator paper 试纸indicatrix 指示量，指示线，特征曲线index signal 指示信号indicate 指示，表明Indicated defect length 缺陷指示长度Indication 指示indifferent electrode 无关电极indiffusible 不扩散的indirect export 间接出口indirect import 间接进口indium(abbr.In) 铟individual 个体的，个别的Indirect exposure 间接曝光Indirect magnetization 间接磁化Indirect magnetization method 间接磁化法Indirect scan 间接扫查indoor 室内的induce 引起，感应，诱导induced electricity 感生电，感应电induct 感应，引导，引入inductance 电感，感应系数inductance bridge flowmeter 感应电桥流量计Induced field 感应磁场感生场Induced current method 感应电流法inductance meter 电感测定计induction ①引导，前言②感应，电感③吸气induction apparatus 感应器induction coil 感应线圈inductive transducer 感应传感器inductogram X射线照片inductometer 电感计inductor 感应器，感应机inductorium 感应器inductosyn 感应式传感器industrial(abbr.indust.) 工业的，产品的industrial exhibition 工业展览会industrial robot 工业机器人industry 工业，产业Industrial X-ray films 工业X射线胶片indutrial X-ray machin 工业X射线机industrial radiographic film dryer 工业射线胶片干燥器inert 惰性的，无效的inference 推论，推断infinite 无限的，无穷的infinitesimal 无限小的，无穷小的infinity 无穷大，无限，无限距inflame 燃，着火inflammable 可燃的，易燃的inflation 膨胀，充气，打气inflator 充气机inflow 流入，吸入，进气influence 影响，感应influx 流入，注入inform 报告，通告，告诉information 情报，资料，消息，数据information generator 信息发送器information storage unit 信息存储器infra- 下，低于，内，间infranics 红外线电子学infrared ①红外线的②红外线infrared detector 红外线探测器infrared drier 红外线干燥器infrared equipment 红外线设备infrared furnace 红外线炉infrared gas analyzer 红外线气体分析仪infrared heater 红外线加热器infrared lamp 红外线灯infrared laser 红外激光器infrared light 红外线infrared liner polarizer 红外线直线偏振镜infrared photography 红外摄影术infrared radiation 红外线照射infrared radiator 红外线辐射器infrared rays 红外线infrared spectrophotometer 红外分光光度计Infrared imaging system 红外成象系统Infrared sensing device 红外传感装置infrasonic frequency 次声频infrequent 稀有的，不常见的infrared thermography 红外热成象红外热谱Inherent fluorescence 固有荧光inherent 生来的，固有的，先天的inheritance 遗传，继承inhibition 抑制，延迟，阻滞inhibitor 抑制剂抑制器inhomogeneous 不纯的，不均匀的in-house 自身的，内部的initial 开始的，最初的initial charge 起始电荷initial data 原始数据initiator ①创造人②引发剂Inherent filtration 固有滤波Initial permeability 起始磁导率初始磁导率Initial pulse 始脉冲Initial pulse width 始波宽度始脉冲宽度injection 注射，喷射injection syringe 注射器injector 注射器，喷射器injector pump 注射泵injury 伤，损伤，损害ink 墨水，油墨ink jet printer 墨水喷射印刷机，喷水式打印机ink jet recorder 墨水喷射记录器ink writer 印字机ink writing oscillograph 记录示波仪inlay 嵌体，嵌入inlead 引入线inlet 入口，入线，输入inlet port 入口inner 内部的innocuous 无害的，良性的innovation 革新，改革innumerable 无数的，数不清的ino- 纤维inoperative 无效的，不工作的inorganic 无机的inorganic chemistry 无机化学inosculation 吻合，联合in-out box 输入-输出盒in parallel 并联in phase 同相的input 输入，输入电路input buffer 输入缓冲器input coupler 输入耦合器input device 输入装置input filter 输入滤波器input impedance 输入阻抗input output adapter 输入-输出衔接器input tranformer 输入变压器inscription 标题，注册in series 串联insert ①插入物，垫圈②插入，植入inserter 插入器，插入物insertion 插入insert tube 嵌入式X射线管inset 插页，插图，插入inside 内部，内侧，在……里面Inserted coil 插入式线圈Inside coil 内部线圈Inside-out testing 外泄检测泄出检测Inspection 检查检验insignificant 无意义的，轻微的insolation 曝晒，日照insoluble 不溶解的inspection 验收，检查，商检inspection certificate 检验证明书inspection fee 检验费inspection machine 检验设备inspection standard 检验标准inspector ①测定器②检验员inspectoscope 检查镜Inspection medium 检查介质检验介质Inspection frequency 检测频率inspissator 浓缩器，蒸浓器instability 不稳定性install 安装，装置installation ①安装②装置，设备installation fundamental circle 安装基准圆installing 安装，插入instance 例证，实例，情况instantaneous value 瞬时值，即时值instead 代替，更换instillation 滴注法，灌注institute 学会，协会，研究所institution 机关，机构，学校，制度instruction ①指示，命令②说明，说明书instruction counter 指令计数器instrument 仪器，器械，仪表instrumental error 仪器误差instrumentation ①器械，设备②器械操作法instrument air 仪表气源instrument board 仪表板instrument cabinet 器械柜instrument carriage 器械车instrument case 器械箱instrument cover 仪器外表instrument cupboard 器械柜instrument light 仪表信号灯instrument lubricant 器械润滑剂instrument rack 器械架仪器架instrumenent repairing table 器械修理台instrument stand 仪器架instrument table 器械台，器械桌insulant 绝缘材料insulated cable 绝缘电缆insulated sleeve 绝缘套管insulating oil 绝缘油insulation 绝缘，绝热，隔离insulation resistance 绝缘电阻insulator 绝缘体，绝热体insullac 绝缘漆insusceptible 不受……影响的，不接受……的intact 完整的，未受损伤的integral ①积分（的）②完整的integraph 积分仪integrated circuit(abbr.IC) 集成电路integrated circuit microelectrode 集成电路微电极integrated circuit storage 集成电路存储器integrating dosimeter 累计剂量仪integrating instrument 积分仪，积算仪表integrator 积分仪integrogram 积分图integronics 综合电子设备intellect 智力，才智intensifier ①增强器②照明装置Intensifying factor 增感系数Intensifying screen 增感屏intensimeter X射线强度计intensionometer X射线强度量计intensity 强度intensity level ①强度级（声音）②亮度intensity output 声强输出intensive 加强的，集中的，重点的inter- 在……中间，内，相互interaction 相互影响，相互作用，干扰interception 相交，折射（光）interchange 交替，交换interchanger 交换器intercondenser 中间电容器intercooler 中间冷却器interdiction 禁止，制止interest 兴趣，关心，注意，利益interesting 有趣的interface （计算机）接口界面Interval arrival time （Δtij) 到达时间差(Δtij) Interface boundary 界面interface echo 界面回波interfacial tensiometer 界面张力计interfacial tension 界面张力Interface trigger 界面触发Interference 干涉interference absorber 干扰吸收器interference filter ①干涉滤波器②干涉滤光镜interference preventer 防干扰装置interference refractometer 干涉折射计interference spectroscope 干涉分光镜interferogram 干涉图interferometer 干涉仪，干扰计interferoscope 干涉镜interior 内部，内部的interior angle welding line joint 内侧角焊缝接头intermission 间断间歇interlayer 夹层隔层intermediate frequency(abbr.I.F.) 中频（300～3000千周/秒）internal energy 内能internal exposure 体内照射internal gauge 内径规international(abbr.Int.) 国际的，世界的international candle 国际烛光international fair 国际博览会international market 国际市场international standard 国际标准international treaty 国际条约international unit(abbr. I.U) 国际单位interphase 界面interpolation 插入，内插法interpretation 翻译，解释，说明interpreter 翻译程序，翻译机interrupt 断续，中断interrupter 断流器，断续器interspace 空间，间隙，中间interstage amplifier 级间放大器inter-sync 内同步interval 间隔，时间间隔，中断期intervalometer 定时器，时间间隔计interval timer 限时器in toto 全，整体intra- 在内，内，内部interpretation 解释intrasonic 超低频intro- 入口，在内introduce ①引进，引导②前言，绪论introduction 说明书，前言，绪论intromission 插入，输入introscope 内腔检视仪，内孔窥视仪in vacuo 在真空中invagination 凹入，折入，套叠invasive 侵害的，侵入的invention 发明，创造inventor 发明者，创造者inventory ①清单，存货单②设备，机器inversion 转换，逆转inverted cone 倒锥形inverted image 倒像inverter 倒相器，交换器，换流器inverting amplifier 倒相放大器inverting eyepiece 倒像目镜invest 包埋，围模，附于investigation ①调查，研究②调查报告invisible light filter 不可见光滤光镜invisible spectrum 不可见光谱involuntary 不随意的，偶然的involve 包含，包括inward 内，向内的Io(ionium) 碘iodide 碘化物iodine(abbr. I) 碘iodo- 碘iodoform 碘仿，三碘甲烷ion pump 离子泵ion 离子ion analyser 离子分析仪ion exchange 离子交换ion exchange chromatography 离子交换色谱法ion exchanger ①离子交换器②离子交换器ion exchange resin 离子交换树脂ionic rays 离子射线ionic strength 离子强度ionic weight 离子量ionization 电离，游离，离子化ionization chamber 电离室ionization constant 电离常数ionization meter 电离测量仪ion source 离子源Ionization chamber 电离室Ionization potential 电离电位Ionization vacuum gage 电离真空计电离真空压力计ion laser 离子激光器ion meter 离子计ionocolorimeter 氢离子比色计ionogram 电离图ionometer ①X射线量计②离子计ionosphere 电离层Ionography 离子放射照相法Ir-192 Gamma ray projector 铱192 γ射线探伤机ionotron 静电消除器ion source 离子源iontoquantimeter ①X射线量计②离子计iontoradiometer X射线量计IP (iso-electric point) 等电点Ir (iridium) 铱ir- “不，无，非”（同in-,但冠于r字头的词前）iraser 红外激射器，红外激光iridium(abbr. Ir) 铱iris ①虹膜②隔膜，膜片③可变光阑iris aperture 可变光圈，可变光阑iron 铁Iron intensifying screens 铁增感屏Irradiance E 辐射通量密度，辐照度Eiron triangle 铁三角架irradiation 照光，辐射irradiator 辐照器，辐射器irregular 不规则的，无规律的irregular lighting 不规则照明irreversibility 不可逆性IR spectrophotometer 红外线分光光度计iso- 同，等，均匀isobar 等压线isochore 等容线（在等体积下温度气压关系曲线）isochrone 等时线，瞬压曲线isochronism 等时性Isolation 隔离度绝缘Isotope 同位素isolation room 隔离室isolator 绝缘体，隔离器，隔离物isomer （同分）异构体isopotential 等电势的，等电的isothermal line 等温线isotope tracer 同位素示踪物isotopic tracer 同位素指示剂，示踪原子ISP(infrared spectrophotometer) 红外分光光度计Jjig 夹具jigger rotor 盘车转子job site 施工现场junction box 接线盒分线箱KK value K值Kaiser effect 凯塞(Kaiser)效应Kilo volt 千伏特（kv）Kiloelectron volt 千电子伏特（keV）Krypton 85 氪85LL/D ratio L/D比（长/径比）Lamb wave 兰姆波land (刀刃的)厚度(纹间)表面(钻头的)刃带(活塞的)环槽(柱塞的)挡圈连接盘焊接区lap width 搭接宽度Latent image 潜象Lateral scan 左右扫查横向扫描lateral translation 侧向平移layout drawing 布置图Lateral scan with oblique angle 斜平行扫查Latitude of an emulsion 胶片曝光宽容度lead foil 铅箔lead pipe铅管。
焊接专业术语中英文对照整理
焊接专业术语中英文对照整理机械——焊接专业术语中英文对照（郭运）整理1Single 单面的2V—groove V型坡口3Joint 焊接接头4Edges overlap 接头形式5Butt 对接6T T型焊接7Fillet 角焊缝8Edge 端接9Corner 角接10Radius 半径11Joint root 焊接根部12Bevel angle 削边角度13Groove angle 坡口角度14Root face 根部钝边15Groove face 坡口面16Plug weld 塞焊17Spot weld 点焊18Seam weld 缝焊19Slot weld 槽焊20Double—flare—bevel—groove K型坡口焊缝21Single—flare—V 单面V型22Edge flange 翻边端接23Corner flange 卷边端接24Flange weld 卷边焊缝25Flare weld 扩口焊缝26Fillet weld 角焊缝27Slot weld 槽焊缝28Spot weld 点焊缝29Surfacing weld 堆焊焊缝30Melt—through weld 熔透焊缝31Backing weld 打底焊缝32Back weld 背面焊缝33Root weld 根部焊缝34Crown weld 隆起部分35Weld reinforcement 焊缝加强36Weld face 焊缝表面37Cap pass 盖面焊道38Weld edge 焊缝边缘39Leg 焊脚40Toe 焊趾41Buildup 堆焊42Weld reinforcement 焊缝加强高43Effective throat 有效焊喉44Concave weld 凹形焊缝45Convex weld 凸形焊缝46Unequal leg fillet 不等脚角焊47Oversize weld 大尺寸焊缝48Depth of fusion 熔合深度49Depth of penetration 熔透深度50Root penetration 根部熔深51Joint penetration 接头熔深52Weld interface 焊缝分界面53Diameter of weld at point of contact 焊缝在接触点上的直径54Thickness 厚度55Tail 尾部56Arrow 箭头57Reference line 参考线58Arrow side 箭头一边59Weld symbol 焊缝符号60Near side 近侧61Arrow side 箭头侧62Far side 远侧63Other side 另一侧64Put the weld on either—side 在任意一侧施焊65There is noside significance 没有方向区别66Edge flange 双卷边67Corner flange 单卷边68Weld size 焊缝尺寸69Effective throat 有效厚度70Root opening 根部间隙71Full penetration double bevel—groove weld K形坡口全焊透焊缝72Full penetration double V—groove weld 双V形坡口全焊透焊缝73Partial penetration double bevel—groove weld K形坡口部分焊透焊缝74Partial penetration double V—groove weld 双V形坡口部分焊透焊缝75Bevel groove 削边坡口76Flare groove 喇叭形坡口77Flange groove 卷边坡口78V—groove V形坡口79Staggered intermittent fillet weld 交错间断角焊缝80Chain intermittent fillet weld 链状间断角焊缝81Segmented fillet weld 分段角焊缝82Pitch distance 间距83Depth of filling 填充深度84Slot weld width 槽焊缝宽度85Plug weld diameter 塞焊缝的直径86Angle of countersink 深孔角度87A dimension to the right of the symbol 在符号右边的尺寸88A dimension of the required suggest diameter 所要求的直径尺寸89A value for the required shear strength per spot 每点所要求的剪切强度值90Spot weld size 点焊缝尺寸91Spot weld length 点焊缝的长度92Number of spot required 所要求的点的数量93Pitch distance between adjacent spots 两个相邻点的间距94Reference line 参考线95Melt—through of weld from other side 焊缝在另一侧熔透96Single bevel—groove weld with backing weld 加垫板的单边坡口焊缝97Single bevel—groove weld with back weld 背面焊的单边坡口焊缝98Single bevel—groove weld with backing weld 带垫板的V 形坡口焊缝99Single bevel—groove weld with back weld背面焊的V形坡口焊缝100Square groove 直边坡口101Skewed groove 斜坡口102Sloped groove 倾斜坡口103Scarf 斜嵌接104Gas metal arc spot weld 气体保护点焊105Resistance spot weld 电阻点焊106Gas metal arc seam weld 气体保护滚焊缝107Resistance seam weld 电阻滚焊缝108Gas metal arc slot weld 气体保护槽焊缝109The type of electrode to use 所要求焊条形式110The weld quality standard 焊缝质量标准111The weld procedure to use 所用的焊接程序112Codes 规范113Drawing 图纸114Specifications 技术要求115Contracts 合同116General 一般注解117Local 局部注解118The point for lifting an object 吊装一物体的点119Filler metals 填充金属120Pressure vessel fabrication 压力容器制造121Be as simple as possible 尽可能简单122Welder 焊工123Code body 规范本身124Shielded metal arc 手工电弧焊125Submerged arc 埋弧焊126Face bend 面弯127Root bend 背弯128Side bend 侧弯129Nick break 缺口破坏130Tensile 拉伸131Monitoring production welding 监视生产中的焊接132Strength 强度133Toughness 韧性134Hardness 硬度135Ductility 延展性136Compressive 压缩137Impact 冲击138Fatigue 疲劳139Undercut 咬边140Overlap 焊瘤141Cracking 裂纹142Porosity 气孔143Ultimate tensile strength 极限拉伸强度144Percent elongation 延伸率145Percent reduction of area 断面收缩率146Impact strength 冲击强度147Yield strength 屈服强度148Brinell 布氏149Vickers 韦氏150Rockwell 洛氏151Knoop 努氏152Fatigue test 疲劳试验153T ensile test 拉伸试验154Micro--hardness test 显微硬度试验155Charpy impact test 夏比冲击试验156Soundness test 致密性测试157Fillet break 角焊缝断裂158Metallographic 金相159Transverse fillet weld shear test 横向角焊缝剪切试验160Quality of the fractured weld 焊缝端口的质量161Ductility of the weld metal 焊缝金属的延展性162Impact strength of the weld 焊缝的冲击强度163Tensile strength of the base metal 母材的拉伸强度164Weld—ability 可焊性165Scratches caused by improper handling 由不适当的处理导致的划痕166Incomplete fusion 未熔合167Distortion 变形168Slag inclusions 夹渣169Vibratory stress relief 振动消除应力170External restraint 外部拘束171Thermal stress relief 热消除应力172Peening 锤击173Annealing 退火174Quenching 淬火175Tempering 回火176Normalizing 正火177Decrease current 降低电流178Decrease voltage 降低电压179Increase travel speed 加快焊接速度180Change from weave to stringer bead technique 从横向摆动焊道改成直线焊道技术181Result in a wider heat—affected zone hardness导致热影响区更宽182Produce a lower heat—affected zone hardness 降低热影响区硬度183Slow down the cooling rate 降低冷却速度184Reduce the tendency to produce martensite in the heat—affected zone 减少在热影响区形成马氏体的倾向185Stress relief 消除应力186Crater crack 弧坑裂纹187SMAW 手动电弧焊188PAW 等离子焊189FCAW 药芯焊190SAW 埋弧焊191Underfill 未焊满192Excess convexity 太凸193Excess weld reinforcement 焊缝余高太高194Overfill 过充195Scratch start 擦伤196Arc strike 引弧烧伤197Tungsten inclusion 夹钨198Lamination 分层199Lamellar tear 片状撕裂200Seam 划伤201Pipe shrinkage 缩孔202Longitudinal crack 纵向裂纹203Transverse crack 横向裂纹204Underbead crack 焊道中裂纹205T oe crack 焊趾裂纹206Root crack 根部裂纹207Base metal crack 母材裂纹208Before welding 焊接前209During welding 焊接时210After welding 焊接后211Waiting time 等待时间212Penetrating time 渗透时间213Soak time 吸入时间214Dwell time 驻留时间215AC 交流电216DC 直流电217DCEP 直流反接218。
焊接专业英语词汇(焊接及相关工艺英文缩写)
焊接专业英语词汇（焊接及相关工艺英文缩写）AW——ARC WELDING——电弧焊AHW——atomic hydrogen welding——原子氢焊BMAW——bare metal arc welding——无保护金属丝电弧焊CAW——carbon arc welding——碳弧焊CAW-G——gas carbon arc welding——气保护碳弧焊CAW-S——shielded carbon arc welding——有保护碳弧焊CAW-T——twin carbon arc welding——双碳极间电弧焊EGW——electrogas welding——气电立焊FCAW——flux cored arc welding——药芯焊丝电弧焊FCW-G——gas-shielded flux cored arc welding——气保护药芯焊丝电弧焊FCW-S——self-shielded flux cored arc welding——自保护药芯焊丝电弧焊GMAW——gas metal arc welding——熔化极气体保护电弧焊GMAW-P——pulsed arc——熔化极气体保护脉冲电弧焊GMAW-S——short circuiting arc——熔化极气体保护短路过度电弧焊GTAW——gas tungsten arc welding——钨极气体保护电弧焊GTAW-P——pulsed arc——钨极气体保护脉冲电弧焊MIAW——magnetically impelled arc welding——磁推力电弧焊PAW——plasma arc welding——等离子弧焊SMAW——shielded metal arc welding——焊条电弧焊SW——stud arc welding——螺栓电弧焊SAW——submerged arc welding——埋弧焊SAW-S——series——横列双丝埋弧焊RW——RWSISTANCE WELDING——电阻焊FW——flash welding——闪光焊RW-PC——pressure controlled resistance welding——压力控制电阻焊PW——projection welding——凸焊RSEW——resistance seam welding——电阻缝焊RSEW-HF——high-frequency seam welding——高频电阻缝焊RSEW-I——induction seam welding——感应电阻缝焊RSEW-MS——mash seam welding——压平缝焊RSW——resistance spot welding——点焊UW——upset welding——电阻对焊UW-HF——high-frequency ——高频电阻对焊UW-I——induction——感应电阻对焊SSW——SOLID STATE WELDING——固态焊CEW——co-extrusion welding——CW——cold welding——冷压焊DFW——diffusion welding——扩散焊HIPW——hot isostatic pressure diffusion welding——热等静压扩散焊EXW——explosion welding——爆炸焊FOW——forge welding——锻焊FRW——friction welding——摩擦焊FRW-DD——direct drive friction welding——径向摩擦焊FSW——friction stir welding——搅拌摩擦焊FRW-I——inertia friction welding——惯性摩擦焊HPW——hot pressure welding——热压焊ROW——roll welding——热轧焊USW——ultrasonic welding——超声波焊S——SOLDERING——软钎焊DS——dip soldering——浸沾钎焊FS——furnace soldering——炉中钎焊IS——induction soldering——感应钎焊IRS——infrared soldering——红外钎焊INS——iron soldering——烙铁钎焊RS——resistance soldering——电阻钎焊TS——torch soldering——火焰钎焊UUS——ultrasonic soldering——超声波钎焊WS——wave soldering——波峰钎焊B——BRAZING——软钎焊BB——block brazing——块钎焊DFB——diffusion brazing——扩散焊DB——dip brazing——浸沾钎焊EXB——exothermic brazing——反应钎焊FB——furnace brazing——炉中钎焊IB——induction brazing——感应钎焊IRB——infrared brazing——红外钎焊RB——resistance brazing——电阻钎焊TB——torch brazing——火焰钎焊TCAB——twin carbon arc brazing——双碳弧钎焊OFW——OXYFUEL GAS WELDING——气焊AAW——air-acetylene welding——空气乙炔焊OAW——oxy-acetylene welding——氧乙炔焊OHW——oxy-hydrogen welding——氢氧焊PGW——pressure gas welding——气压焊OTHER WELDING AND JOINING——其他焊接与连接方法AB——adhesive bonding——粘接BW——braze welding——钎接焊ABW——arc braze welding——电弧钎焊CABW——carbon arc braze welding——碳弧钎焊EBBW——electron beam braze welding——电子束钎焊EXBW——exothermic braze welding——热反应钎焊FLB——flow brazing——波峰钎焊FLOW——flow welding——波峰焊LBBW——laser beam braze welding——激光钎焊EBW——electron beam welding——电子束焊EBW-HV——high vacuum——高真空电子束焊EBW-MV——medium vacuum——中真空电子束焊EBW-NV——non vacuum——非真空电子束焊ESW——electroslag welding——电渣焊ESW-CG——consumable guide eletroslag welding——熔嘴电渣焊IW——induction welding——感应焊LBW——laser beam welding——激光焊PEW——percussion welding——冲击电阻焊TW——thermit welding——热剂焊THSP——THERMAL SPRAYING——热喷涂ASP——arc spraying——电弧喷涂FLSP——flame spraying——火焰喷涂FLSP-W——wire flame spraying——丝材火焰喷涂HVOF——high velocity oxyfuel spraying——高速氧燃气喷涂PSP——plasma spraying——等离子喷涂VPSP-W——vacuum plasma spraying——真空等离子喷涂TC——THERMAL CUTTING——热切割OC——OXYGEN CUTTING——气割OC-F——flux cutting——熔剂切割OC-P——metal powder cutting——金属熔剂切割OFC——oxyfuel gas cutting——氧燃气切割CFC-A——oxyacetylene cutting——氧乙炔切割CFC-H——oxyhydrogen cutting——氢氧切割CFC-N——oxynatural gas cutting——氧天然气切割CFC-P——oxypropanne cutting——氧丙酮切割OAC——oxygen arc cutting——氧气电弧切割OG——oxygen gouging——气刨OLC——oxygen lance cutting——氧矛切割AC——ARC CUTTING——电弧切割CAC——carbon arc cutting——碳弧切割CAC-A——air carbon arc cutting——空气碳弧切割GMAC——gas metal arc cutting——熔化极气体保护电弧切割GTAC——gas tungsten arc cutting——钨极气体保护电弧切割PAC——plasma arc cutting——等离子弧切割SMAC——shielded metal arc cutting——焊条电弧切割HIGH ENERGY BEAM CUTTING——高能束切割EBC——electron beam cutting——电子束切割LBC——laser beam cutting——激光切割LBC-A——air——空气激光切割LBC-EV——evaporative——蒸气激光切割LBC-IG——inert gas——惰性气体激光切割LBC-O——oxygen——氧气激光切割激光切割laser cutting(LC); laser beam cutting电子束切割electron beam cutting喷气激光切割gas jet laser cutting碳弧切割carbon arc cutting水下切割underwater cutting喷水式水下电弧切割waterjet method underwater arc cutting氧矛切割oxygen lancing; oxygen lance cutting溶剂氧切割powder lancing手工气割manual oxygen cutting自动气割automatic oxygen cutting仿形切割shape cutting数控切割NC (numerical-control) cutting快速切割high-speed cutting垂直切割square cut叠板切割stack cutting坡口切割beveling; bevel cutting碳弧气割carbon arc air gouging火焰气刨flame gouging火焰表面清理scarfing氧熔剂表面修整powder washing预热火焰preheat flame预热氧preheat oxygen切割氧cutting oxygen/ cutting stream切割速度cutting speed切割线line of cut/ cut line切割面face of cut/ cut face切口kerf切口上缘cutting shoulder切口宽度kerf width后拖量drag切割面平面度evenness of cutting surface/ planeness of cutting surface 割纹深度depth of cutting veins/ stria depth切割面质量quality of cut face上缘熔化度shoulder meltability/ melting degree of shoulder切口角kerf angle缺口notch挂渣adhering slag结瘤dross割炬cutting torch/ cutting blowpipe/ oxygen-fuel gas cutting torch割枪cutting gun割嘴cutting nozzle/ cutting tip快速割嘴divergent nozzle/ high-speed nozzle表面割炬gouging blowpipe水下割炬under-water cutting blowpipe水下割条electrode for under-water cutting粉剂罐powder dispenser数控切割机NC cutting machine门式切割机flame planer光电跟踪切割机photo-electric tracing cutting火焰切管机pipe flame cutting machine磁轮式气割机gas cutting machine with magnetic wheels 焊接结构welded structure/ welded construction焊件weldment焊接部件weld assembly组装件built-up member接头设计joint design焊接应力welding stress焊接瞬时应力transient welding stress焊接残余应力welding residual stress热应力thermal stress收缩应力contraction stress局部应力local stress拘束应力constraint stress固有应力inherent stress固有应变区inherent strain zone残余应力测定residual stress analysis逐层切割法Sach’s methodX射线衍射法X-ray stress analysis小孔释放法Mathar method固有应变法inherent strain method消除应力stress relieving局部消除应力local stress relieving应力重分布stress redistribution退火消除应力stress relieving by annealing温差拉伸消除应力low temperature stress relieving机械拉伸消除应力mechanical stress relieving应力松弛stress relaxation焊接变形welding deformation焊接残余变形welding residual deformation局部变形local deformation角变形angular distortion自由变形free deformation收缩变形contraction deformation错边变形mismatching deformation挠曲变形deflection deformation波浪变形wave-like deformation火焰矫正flame straightening反变形backward deformation焊接力学welding mechanics断裂力学fracture mechanics弹塑性断裂变形elasto-plastic fracture mechanics线弹性断裂力学linear elastic fracture mechanics延性断裂ductile fracture脆性断裂brittle fracture应力腐蚀开裂stress corrosion cracking热应变脆化hot straining embrittlement临界裂纹尺寸critical crack size裂纹扩展速率crack propagation rate裂纹张开位移（COD）crack opening displacement拘束度restraint intensity拘束系数restraint coefficient应变速率strain rate断裂韧度fracture toughness应力强度因子stress intensity factor临界应力强度因子critical stress intensity factors应力腐蚀临界应力强度因子critical stress intensity factor of stress corrosion cracking J积分J-integration罗伯逊止裂试验Robertson crack arrest testESSO试验ESSO test双重拉伸试验doucle tension test韦尔斯宽板拉伸试验Well’s wide plate test帕瑞斯公式Paris formula断裂分析图fracture analysis diagram焊接车间welding shop焊接工作间welding booth焊接工位welding post/ welding station焊接环境welding surroundings焊工welder电焊工manual arc welder气焊工gas welder焊接检验员weld inspector焊工培训welders training焊工模拟训练器trainer of synthetic weld焊工考试welder qualification test焊工合格证welder qualification/ welder qualified certification钢板预处理steel plate pretreatment喷沙sand blast喷丸shot blast矫正straighten开坡口bevelling (of the edge)/ chanfering装配assembly/ fitting安装erect刚性固定rigid fixing装配焊接顺序sequence of fitting and welding焊接工艺评定welding procedure qualification（转载自第一范文网，请保留此标记。
焊接专业英汉词典(DOC)
焊接专业英汉词典(1)2006-11-08 22:23:32 作者：jql来源：浏览次数：338 网友评论0条文字大小：【大】【中】【小】评分等级：0熔接fusion welding压接pressure welding焊接过程welding process焊接技术welding technique焊接工艺welding technology/procedure焊接操作welding operation焊接顺序welding sequence焊接方向direction of welding焊接位置welding position熔敷顺序build-up sequence/deposition sequence焊缝倾角weld slope/inclination of weld axis焊缝转角weld rotation/angle of rotation平焊位置flat position of welding横焊位置horizontal position of welding立焊位置vertical position of welding仰焊位置overhead position of welding平焊downhand welding/flat position welding横焊horizontal position welding立焊vertical position welding仰焊overhead position welding全位置焊all position welding：熔焊时，焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。
如水平固定管所进行的环缝焊接向下立焊vertical down welding/downward welding in the vertical posit ion向上立焊vertical up welding/upward welding in the vertical position倾斜焊inclined position welding上坡焊upward welding in the inclined position下坡焊downward welding in the inclined position对接焊butt welding角焊fillet welding搭接焊lap welding船形焊fillet welding in the downhand position/fillet welding in the flat position平角焊horizontal fillet welding立角焊fillet welding in the vertical position仰角焊fillet welding in the overhead position坡口焊groove weldingI形坡口对接焊square butt welding喇叭形坡口焊flare groove welding卷边焊flanged edge welding纵缝焊接welding of longitudinal seam横缝焊接welding of transverse seam环缝焊接girth welding/ circumferential螺旋缝焊接welding of spiral seam/welding of helical seam环缝对接焊butt welding of circumferential seam定位焊tack welding单面焊welding by one side双面焊welding by both sides单道焊single pass welding/single run welding多道焊multi-pass welding单层焊single layer welding多层焊multi-layer welding分段多层焊block sequence/ block welding分层多道焊multi-layer and multi-pass welding连续焊continuous welding断续焊intermittent welding打底焊backing weld封底焊back sealing weld盖面焊cosmetic welding深熔焊deep penetration welding摆动焊welding with weaving/weave bead welding前倾焊foreward welding (英国)/ forehand welding (美国) 后倾焊backward welding(英国)/ backhand welding(美国) 分段退焊backstep welding跳焊skip welding对称焊balanced welding/ balanced welding sequence左焊法leftward welding forehand welding右焊法rightward welding/backhand welding挑弧焊whipping method自动焊automatic welding手工焊manual welding/hand welding车间焊接shop welding工地焊接site welding(英国)/ field welding (美国)拘束焊接restraint welding堆焊surfacing/building up/overlaying隔离层堆焊buttering端部周边焊boxing/end return返修焊rewelding补焊repair welding塞焊plug welding槽焊slot welding衬垫焊welding with backing焊剂垫焊welding with flux backing窄间隙焊narrow-gap welding强制成形焊enclosed welding脉冲电弧焊pulsed are welding电弧点焊arc spot welding螺柱焊stud welding热风焊hot gas welding高能焊high grade energy welding固态焊接solid-state welding单面焊双面成形one-side welding with back formation 焊接条件welding condition焊接工艺参数welding parameter极性polarity正接electrode negative/straight polarity反接electrode positive/reversed polarity运条方式manipulation of electrode焊接电流welding current焊接电流增加时间welding current upslope time焊接电流衰减时间welding current downslope time电流密度current density短路电流short circuit current脉冲电流pulse level/pulse current level脉冲电流幅值pulse current amplitude基值电流background level脉冲频率pulse frequency脉冲焊接电流占空比duty cycle of pulse duration电弧电压arc voltage再引弧电压reignition voltage焊接速度welding speed行走速度rate of travel/travel speed送丝速度wire feed rate线能量heat input/energy input热输入heat input预热preheat后热postheat焊后热处理posweld heat treatment/postheat treatment 预热温度preheat temperature层间温度interpass temperature焊接终了温度finishing temperature后热温度postheating temperature焊丝伸出长度wire extension弧长arc length熔化速度melting rate熔化时间melting time熔化系数melting coefficient熔敷速度rate of deposition/deposition rate熔敷系数deposition coefficient熔敷效率deposition efficiency损失系数loss coefficient飞spatter飞溅率spatter loss coefficient融合比fusion ratio稀释dilution稀释率rate of dilution合金过度系数transfer efficiency/recovery (of an element) 坡口groove坡口面groove face坡口面角度angle of bevel (英国)/ bevel angle (美国)坡口角度included angle(英国)/groove angle(美国)坡口高度groove depth钝边root face钝边高度thickness of root face/width of root face根部间隙root gap(英国)/root opening (美国)根部半径root radius/groove radius根部锐边root edge卷边高度height of flange卷边半径radius of flange单面坡口single groove双面坡口double groove坡口形式groove typeI形坡口square grooveV形坡口single V grooveY形坡口single V groove with root face双Y形坡口double Vgroove with root face带钝边U形坡口single U groove带钝边双U形坡口double U grooveVY形坡口single compound angle groove带钝边J形坡口single J groove带钝边双J形坡口double J groove单边V形坡口single bevel groove双V形坡口double V groove不对称双V形坡口asymmetric double V groove双单边V形坡口double bevel groove/K groove带垫板V形坡口V groove with backing/ single V groove with backing喇叭形坡口flare groove锁底坡口single bevel groove with backing locked坡形板边tapered edge焊缝weld接逢seam焊缝符号welding symbol焊缝金属weld metal填充金属filler metal熔敷金属deposited metal焊缝表面weld face/ face of weld焊缝背面back of weld焊缝轴线axis of weld焊缝尺寸size of weld焊缝宽度weld width/ width of weld焊缝长度weld length/ length of weld焊缝有效长度effective length of weld焊缝厚度throat depth/ throat thickness焊缝计算厚度theoretical throat焊缝实际厚度actual throat熔深penetration/ depth of penetration焊缝成形appearance of weld焊缝成形系数form factor of weld余高reinforcement/ excess weld metal背面余高root reinforcement削平焊缝flush weld/ weld machined flush对接焊缝butt weld角焊缝fillet焊脚leg/ fillet weld leg角焊缝断面形状profile of fillet weld平形角焊缝flat fillet凸形角焊缝convex fillet weld凹形角焊缝concave fillet weld角焊缝凹度concavity侧面角焊缝side fillet weld/ fillet weld in parallel shear 正面角焊缝front fillet weld/ fillet weld in normal shear 立角焊缝fillet weld in the vertical position横角焊缝fillet weld in the horizontal position平角焊缝fillet weld in the flat position斜角焊缝oblique fillet weld连续焊缝continuous weld断续焊缝intermittent weld连续角焊缝continuous fillet weld断续角焊缝intermittent fillet weld交错断续角焊缝staggered intermittent fillet weld并列断续角焊缝chain intermittent fillet weld端接焊缝edge weld卷边焊缝flanged edge weld塞焊焊缝plug weld纵向焊缝longitudinal weld横向焊缝transverse weld环行焊缝girth weld/ circumferential weld螺旋形焊缝spiral weld/ helical weld密封焊缝seal weld承载焊缝strength weld联系焊缝connective weld定位焊缝tack weld焊道bead/ run/ pass焊波ripple焊根weld root/ root of weld焊趾weld toe/ toe封底焊道sealing run (after making main weld)/ back weld打底焊道backing weld (before making main weld)/ back weld 根部焊道root pass/ root run填充焊道filling bead盖面焊道cosmetic bead/ cover pass回火焊道temper bead/ annealing bead熔透焊道penetration bead焊层layer接头形状joint geometry等强匹配接头equalmatching weld joint低强匹配接头undermatching weld joint超强匹配接头overmatching weld joint接头根部root of joint对接接头butt jointI形对接接头square butt jointV形对接接头single V butt jointU形对接接头single U butt jointJ形坡口接头single J butt joint双V形对接接头double V butt joint双单边V形对接接头double bevel butt joint/ K groove butt joint 带钝边U形对接接头double U butt joint带钝边J形坡口接头double J joint角接接头corner jointT形接头T joint斜T形接头inclined T joint十字接头cruciform joint/ cross-shaped joint三联接头joint among three members搭接接头lap joint套管接头muff joint/ sleeve joint双盖板接头double strapped joint盖板接头strapped joint端接接头edge joint卷边接头flanged edge joint锁底对接接头lock butt joint斜对接接头oblique butt joint混合接头mixed joint/ composite joint有间隙接头open joint焊接电弧welding arc电弧形态arc shape电弧物理行为arc physics behaviour引弧striking arc引弧电压striking voltage电弧气氛arc atmosphere阴极cathode热阴极hot cathode冷阴极cold cathode阴极斑点cathode spot阴极区cathode region阴极区电场强度intensity of the electric field in the cathode region 阴极压降cathode drop阳极anode阳极斑点anode spot斑点压力spot pressure阳极区anode region阳极区电场焊接专业英汉词典(2)2006-11-08 22:23:32 作者：jql来源：浏览次数：339 网友评论0条文字大小：【大】【中】【小】评分等级：0度intensity of the electric field in the anode region阳极压降anode drop弧柱arc column/ arc stream弧柱压降voltage drop in arc column弧柱电位梯度potential gradient in the arc column弧焰arc flame弧心arc core硬电弧forceful arc/ hard arc软电弧soft arc旋转电弧rotating arc脉冲电弧pulsed arc脉冲喷射电弧pulsed spray arc起皱现象puckering phenomena起皱电弧puckering arc起皱临界电流puckering critical current间接电弧indirect arc压缩电弧compressive arc磁控电弧magnetic controlling arc电弧力arc force电磁力electromagnectic force电磁收缩效应pinch effect电弧飘移wandering of arc电弧稳定性arc stability电弧静特性static characteristic of arc电弧动特性dynamic characteristic of arc最小电压原理principle of minimum voltage 电弧挺度arc stiffness电弧偏吹arc blow磁偏吹magnetic blow阴极清理作用cleaning action of the cathode 电弧自身调节arc self-regulation挖掘作用digging action极性效应polarity effect熔滴droplet熔滴比表面积specific surface of droplet熔滴过渡metal transfer过度频率transition frequency粗滴过渡globular transfer; drop transfer短路过渡short circuiting transfer喷射过渡spray transfer旋转喷射过渡rotating spray transfer脉冲喷射过渡pulsed spray transfer爆炸过渡explosive transfer渣壁过渡flux wall guided transfer熔池molten pool沸腾状熔池boiling molten pool弧坑crater熔渣slag渣系slag system渣系相图slag system diagram碱性渣basic slag酸性渣acid slag碱度basicity酸度acidity长渣long slag短渣short slag粘性熔渣viscous slag氧化物型熔渣oxide melting slag盐型熔渣salt melting slag盐-氧化物型熔渣salt-oxide melting slag熔渣流动性fluidity of the slag; slag fluidity 熔渣solidified slag多孔焊渣porous slag玻璃状焊渣vitreous slag自动脱落焊渣self-releasing slag脱渣性slag detachability焊接设备welding equipment; welding set焊机welding machine; welder电焊机electric welding machine; electric welder焊接电源welding power source焊接热循环weld thermal cycle焊接温度场field of weld temperature; weld temperature field 准稳定温度场quasi-stationary temperature field焊接热源welding heat source点热源point heat source线热源linear heat source面热源plane heat source瞬时集中热源instantaneous concentration heat source热效率thermal efficiency热能集中系数coefficient of heat flow concentration峰值温度peak temperature瞬时冷却速度momentary cooling rate冷却时间cooling time置换氧化substitutionary oxydation扩散氧化diffusible oxydation脱氧desoxydation先期脱氧precedent desoxydation扩散脱氧diffusible desoxydation沉淀脱氧precipitation desoxydation扩散氢diffusible hydrogen初始扩散氢initial diffusible hydrogen100℃残余扩散氢diffusible hydrogen remained at 100℃残余氢residual hydrogen去氢dehydrogenation去氢热处理heat treatment for dehydrogenation脱硫desulphurization脱磷dephosphorization渗合金alloying微量合金化microalloying一次结晶组织primary solidification structure二次结晶组织secondary solidification structure联生结晶epitaxial solidification焊缝结晶形态solidification mode in weld-bead结晶层状线ripple多边化边界polygonization boundary结晶平均线速度mean solidification rate针状铁素体acicular ferrite条状铁素体lath ferrite侧板条铁素体ferrite side-plate晶界欣素体grain boundary ferrite; polygonal ferrite; pro-entectoid fer rite粒状贝氏体granular bainite板条马氏体lath martensite过热组织overheated structure魏氏组织Widmannst?tten structureM-A组元martensite-austenite constituent焊件失效分析failure analysis of weldments冷裂判据criterion of cold cracking冷裂敏感系数cold cracking susceptibity coefficient脆性温度区间brittle temperature range氢脆hydrogen embrittlement层状偏析lamellar segregation愈合healing effect断口金相fractography断口fracture延性断口ductile fracture韧窝断口dimple fracture脆性断口brittle fracture解理断口cleavage fracture准解理断口quasi-cleavage fracture氢致准解理断口hydrogen-embrittlement induced 沿晶断口intergranular fracture穿晶断口transgranular fracture疲劳断口fatigue fracture滑移面断口glide plane fracture断口形貌fracture apperance断口试验fracture test宏观断口分析macrofractography放射区radical zone纤维区fibrous zone剪切唇区shear lip aone焊接性weldability使用焊接性service weldability工艺焊接性fabrication weldability冶金焊接性metallurgical weldability热焊接性thermal weldability母材base metal; parent metal焊接区weld zone焊态as-welded (AW)母材熔化区fusion zone半熔化区partial melting region未混合区unmixed zone熔合区bond area熔合线weld junction (英)；bond line (美)热影响区heat-affected zone (HAZ)过热区overheated zone粗晶区coarse grained region细晶区fine grained region过渡区transition zone硬化区hardened zone碳当量carbon equivalent铬当量chromium equivalent镍当量nickel equivalent舍夫勒组织图Schaeffler's diagram德龙组织图Delong’s diagram连续冷却转变图（CCT图）continuous cooling transformation 裂纹敏感性cracking sensibility焊接裂纹weld crack焊缝裂纹weld metal crack焊道裂纹bead crack弧坑裂纹crater crack热影响区裂纹heat-affected zone crack纵向裂纹longitudinal crack横向裂纹transverse crack微裂纹micro-crack; micro-fissure热裂纹hot crack凝固裂纹solidification crack晶间裂纹intercrystalline crack穿晶裂纹transcrystalline crack多边化裂纹polygonization crack液化裂纹liquation crack失延裂纹ductility-dip crack冷裂纹cold crack延迟裂纹delayed crack氢致裂纹hydrogen-induced crack焊道下裂纹underbead crack焊根裂纹root crack焊趾裂纹toe crack锯齿形裂纹chevron cracking消除应力处理裂纹stress relief annealing crack (SR crack)再热裂纹reheat crack焊缝晶间腐蚀weld intercryctalline corrosion刀状腐蚀knife line attack敏化区腐蚀weld decay层状撕裂lamellar tearing焊接性试验weldability裂纹试验cracking testIIW裂纹试验IIW cracking testY形坡口裂纹试验slit type cracking test分块形槽热裂纹试验segmented circular groove cracking testH形裂纹试验H-type cracking test鱼骨形裂纹试验fishbone cracking test指形裂纹试验finger (cracking) testT形裂纹试验Tee type cracking test环形槽裂纹试验circular-groove cracking test可调拘束裂纹试验varestraint testBWRA奥氏体钢裂纹试验BWRA cracking test for austenitie steel圆棒裂纹试验bar type cracking test; round bar cracking test里海裂纹试验Lehigh restraint cracking test圆形镶块裂纹试验circular-path cracking test十字接头裂纹试验cruciform cracking testZ向窗口拘束裂纹试验Z-direction window type restraint cracking test G-BOP焊缝金属裂纹试验G-BOP weld metal crack test巴特尔焊道下裂纹试验Battelle type underbead cracking testU形拉伸试验U-tension test缪雷克期热裂纹试验Murex hot cracking test菲斯柯裂纹试验FISCO (type) cracking testCTS裂纹试验controlled thermal severity拉伸拘束裂纹试验（TRC试验）tensile restraint cracking test刚性拘束裂纹试验（RRC试验）rigid restraint cracking test插销试验implant testTigamajig 薄板焊接裂纹试验Tigamajing thin plate cracking test 焊道纵向弯曲试验longitudinal-bead test柯麦雷尔弯曲试验Kommerell bead bend test肯泽尔弯曲试验Kinzel test缺口弯曲试验notch bend test热朔性试验hot-ductility test热影响区冲击试验impact test of HAZ热影响区模拟试验synthetic heat-affected zone test最高硬度试验maximum hardness test落锤试验NRL (Naval Research Laboratory)测氢试验Hydrogen test焊接材料电极焊接材料welding consumables电极electrode熔化电极consumable electrode不熔化电极nonconsumable electrode钨电极tungsten electrode焊丝welding wire. Welding rod实心焊丝solid wire渡铜焊丝copper-plating welding wire自保护焊丝self-shielded welding wire药芯焊丝flux-cored wire复合焊丝combined wire堆焊焊丝surfacing welding rod填充焊丝filler wire焊条electrode/ covered electrode焊芯core wire药皮coating (of an electrode)/ covering (of an electrode)涂料coating flux/coating material造气剂gas forming constituents造渣剂slag forming constituents合金剂alloying constituent脱氧剂dioxidizer稳弧剂arc stabilizer粘接剂binder水玻璃water glass水玻璃模数modules of water glass酸性焊条acid electrode高钛型焊条high titania (type) electrode钛钙型焊条lime titania type electrode钛铁矿形焊条ilmenite type electrode氧化铁型焊条iron oxide type electrode/ high iron oxide type electrode 高纤维素型焊条high cellulose (type) electrode石墨型焊条graphite type electrode碱性焊条basic electrode/ lime type covered electrode低氢型焊条low hydrogen type electrode高韧性超低氢焊条high toughness super low hydrogen electrode奥氏体焊条austenitic electrode铁素体焊条ferritic electrode不锈钢焊条stainless steel electrode珠光体耐热钢焊条pearlitic heat resistant steel electrode低温钢焊条low temperature steel electrode/ steel electrode for low te mperature铝合金焊条aluminum alloy arc w碳化钨堆焊焊条tungsten carbide surfacing electrode高锰钢堆焊焊条high manganese steel surfacing electrode双芯焊条twin electrode绞合焊条stranded electrode编织焊条braided electrode双层药皮焊条double coated electrode管状焊条flux-cored electrode气渣联合保护型药皮semi-volatile covering焊条工艺性usability of the electrode/ technicality of the electrode焊条使用性running characteristics of an electrode/ operating characteristics of an electrode 焊条熔化性melting characteristics of an electrode焊条直径core diameter焊条偏心度eccentricity (of an electrode)药皮重量系数gravity coefficient of coating焊条药皮含水量percentage of moisture for covering焊条夹吃持端bare terminal (of an electrode)焊条引弧端striking end (of an elcetrode)焊剂welding flux/ flux熔炼焊剂fused flux粘结焊剂bonded flux烧结焊剂sintered flux/ agglomerated flux窄间隙埋弧焊焊剂flux for narrow-gap submerged arc welding低氢型焊剂low hydrogen type flux高速焊剂high speed welding flux无氧焊剂oxygen-free flux低毒焊剂low poison flux磁性焊剂magnetic flux电弧焊arc welding直流电弧焊direct current arc welding交流电弧焊alternating current arc welding三相电弧焊three phase arc welding熔化电弧焊arc welding with consumable金属极电弧焊metal arc welding不熔化极电弧焊arc welding with nonconsumable碳弧焊carbon arc welding明弧焊open arc welding焊条电弧焊shielded metal arc welding (SMAW)重力焊gravity welding躺焊fire cracker welding电弧堆焊arc surfacing自动堆焊automatic surfacing躺板极堆焊surfacing by fire cracker welding带极堆焊surfacing with band-electrode振动电弧堆焊vibratory arc surfacing耐磨堆焊hardfacing埋弧焊submerged arc welding (SAW)多丝埋弧焊multiple wire submerged arc welding纵列多丝埋弧焊Tandem sequence (submerged-arc welding) 横列多丝埋弧焊series submerged arc welding (SAW-S)横列双丝并联埋弧焊transverse submerged arc welding热丝埋弧焊hot wire submerged-arc welding窄间隙埋弧焊narrow-gap submerged arc welding弧压反馈电弧焊arc voltage feedback controlling arc welding 自调节电弧焊self-adjusting arc welding适应控制焊接adaptive control welding焊剂层burden; flux layer气体保护电弧焊gas shielded arc welding保护气体protective atmosphere惰性气体inert-gas活性气体active-gas惰性气体保护焊inert-gas (arc) welding氩弧焊argon arc welding熔化极惰性气体保护电弧焊metal inert-gas arc welding钨极惰性气体保护电弧焊tungsten inert-gas arc welding钨极氢弧焊argon tungsten arc welding脉冲氢弧焊pulsed argon arc welding熔化极脉冲氢弧焊argon metal pulsed arc welding钨极脉冲氢弧焊argon tungsten pulsed arc welding热丝MIG焊hot wire MIG welding热丝TIG焊hot wire TIG welding氨弧焊helium-arc welding活性气体保护电弧焊metal active-gas arc welding混合气体保护电弧焊mixed gas arc welding二氧化碳气体保护电弧焊carbon-dioxide arc welding; CO2 arc welding 细丝CO2焊CO2 arc welding with thin wire粗丝CO2焊CO2 arc welding with thick wire磁性焊剂CO2焊unionarc welding药芯焊丝CO2焊arcos arc process; dual shield arc welding气电立焊electrogas (arc) welding氮弧焊nitrogen-arc welding水蒸气保护电弧焊water vapour arc welding原子氢焊atomic hydrogen welding冲器室中电弧焊controlled atmosphere arc welding旋转电弧焊rotating arc welding短路过渡电弧焊short circuiting arc welding焊丝横摆频率weaving speed of wire焊丝停摆时间electrode keep time of slider等离子弧焊plasma arc welding (PAW)等离子弧plasma arc等离子流plasma jet转移弧transferred arc非转移弧nontransferred arc联合型等离子弧combined plasma arc主弧main arc维弧pilot arc维弧电流pilot arc surrent双弧现象double arcing双弧临界电流critical current of double arcing等离子弧焊枪plasma (welding) torch压缩喷嘴constricting nozzle单孔喷嘴single port nozzle多孔喷嘴multiport nozzle压缩喷嘴孔径orifice diameter孔道长度orifice throat length孔道比orifice throat ratio等离子气plasma gas; orifice gas电极内缩长度electrode setback小孔效应keyhole effect小孔型等离子弧焊keyhole-mode welding熔透型等离子弧焊fusion type plasma arc welding大电流等离子弧焊high-current plasma arc welding中电流等离子弧焊intermediate-current plasma arc welding 小电流等离子弧焊low-current plasma arc welding微束等离子弧焊micro-plasma arc welding交流等离子弧焊AC plasma arc welding脉冲等离子弧焊pulsed plasma arc welding等离子弧堆焊plasma arc surfacing热丝等离子弧堆焊hot wire plasma arc surfacing粉末等离子弧堆焊plasma arc powder surfacing等离子-熔化极惰性气体保护电弧焊plasma MIG welding转移弧电源transferred arc power supply非转移弧电源nontransferred arc power supply电弧焊设备arc welding equipment电弧焊机arc welding machine直流弧焊机DC arc welding machine交流弧焊机AC arc welding machine交直流两用弧焊机AC/DC arc welding machine单站弧焊机single operator arc welding machine多站弧焊机multi-operator arc welding set固定式弧焊机stationary arc welding machine移动式弧焊机portable arc welding machine台式弧焊机bench arc welding machine内燃机驱动式弧焊机combustion engine driven arc welding set电动机驱动式弧焊机motor driven arc welding set熔化极弧焊机arc welding machine using a consumable electrode不熔化极弧焊机arc welding machine using a non-consumable electrode 脉冲弧焊机pulsed arc welding machine气体保护弧焊机gas shielded arc welding machine氩弧焊机argon arc welding machine二氧化碳弧焊机CO2 arc welding machine钨极惰性气体保护弧焊机tungsten inert-gas welding machine熔化仍惰性气体保护弧焊机metal inert-gas welding machine气电立焊机electrogas (arc) welding machine等离子弧焊机plasma arc welding machine微束等离子弧焊机micro-plasma welding equipment原子氢焊机atomic hydrogen welding apparatus埋弧焊机submerged arc welding machine弧焊电源arc welding power source直流弧焊电源DC arc welding power source交流弧焊电源AC arc welding power source交直流两用弧焊电源AC/DC arc welding power source脉冲弧焊电源pulsed arc welding power source上升特性弧焊电源rising characteristic arc welding power source平特性弧焊电源constant –voltage arc welding power source下降特性弧焊电源dropping characteristic arc welding power source垂降特性弧焊电源constant-current arc welding power source多特性弧焊电源slope-controlled arc welding power source逆变式焊接电源inverter welding power source晶体管弧焊电源transistor arc welding power source电源动特性dynamic characteristic电源外特性external characteristic弧焊变压器arc welding transformer弧焊整流器arc welding rectifier硅弧焊整流器silicon arc welding rectifier晶闸管弧焊整流器SCR arc welding rectifier; arc welding silicon controlled rectifier 脉冲弧焊整流器pulsed arc welding rectifier弧焊发电机arc welding generator焊车welding tractor焊接机头welding head行走机构traveller送丝机构wire feeder等速送丝方式constant wire-feed system变速送丝方式alternate wire-feed system跟踪装置tracer焊丝盘wire reel焊钳electrode holder焊枪welding gun电极夹electrode holder导电嘴tip; contact tube喷嘴nozzle焊剂漏斗flux-hopper高频振荡器oscillator; HF unit脉冲引弧器pulsed arc starter; surge injector脉冲稳弧器pulsed arc stabilizer脉冲激弧器pulsed arc exciter输出电抗器out put reactor镇定变阻器ballast rheostat直流分量抑制器direct current suppressor焊接回路welding circuit额定焊接电流rated welding current焊接电流调节范围range of welding current regulation空载电压open circuit voltage(no load voltage)约定负载电压conventional load voltage负载持续率duty cycle额定负载持续率rated duty cycle; standard service手工弧焊机manual arc welding machine电焊渣electroslag welding (ESW)手工电渣焊manual electroslag welding丝极电渣焊electroslag welding with wire electrode板极电渣焊electroslag welding with plate electrode熔嘴电渣焊electroslag welding with consumable nozzle 管极电渣焊electroslag welding with tube electrode窄间隙电渣焊narrow-gap electroslag welding电渣堆焊electroslag surfacing电渣焊机electrosalg welding machine熔嘴consumable nozzle; consumable wire钢档板焊接专业英汉词典(4)2006-11-08 22:23:32 作者：jql来源：浏览次数：343 网友评论0条文字大小：【大】【中】【小】评分等级：0steel shoe (192页)钢冷却板Cu-cooling plate铜滑板copper shoe渣池slag bath渣池深度depth of slag bath渣池电压voltage of slag bath电渣过程稳定性electroslag process stability焊丝间距distance between welding wires电子束焊electron beam welding (EBW)脉冲电子束焊pulsed electron beam welding加速电压acceleration voltage/ operating voltage电子束电流beam current电子束功率beam power电子束功率密度beam power density焦点focal spot焦距focal length工作距离work distance电子束焊机electron beam welding machine高真空电子束焊机full vacuum electron beam welder低真空电子束焊机partial vacuum electron beam welder非真空电子束焊机nonvacuum electron beam welder真空度vacuum电子枪electron gun二极电子枪diode gun三极电子枪triode gun偏压电极bias electrode电磁透镜electromagnetic lens电子束偏转线圈electron beam deflection coils导流系数perveance钉尖spiking激光焊laser welding/ laser beam welding连续激光焊continuous laser welding脉冲激光焊impulsed laser welding激光焊机laser welding equipment气体激光器gas laser固体激光器solid laser焦斑直径focussed diameter of the beam离焦量clearance between focal point and (plate) surface 焊缝深宽比weld seam depth-to-width ratio气焊gas welding氧乙炔焊oxy-acetylene welding氢氧焊oxy-hydrogen welding空气乙炔焊air-acetylene welding氧乙炔焊oxy-acetylene flame氢氧焰oxy-hydrogen flame氧煤气焰oxy-coal gas flame焊接火焰welding flame混合比mixing ratio混合气体可燃范围inflammable limit of the gaseous一次燃烧primary combustion二次燃烧secondary combustion燃烧速度combustion rate燃烧强度combustion intensity火焰热效率flame heating efficiency焰芯inner cone; flame cone内焰internal flame外焰flame envelope中性焰neutral flame氧化焰oxidizing flame碳化焰carburizing flame还原区reducing zone火焰稳定性flame stability回火flashback逆火backfire回烧flashback气体发生速度gasification speed焊炬torch; blow pipe等压式焊炬balanced pressure torch射吸式焊炬injector torch氧乙炔焊炬oxy-acetylene torch焊割两用炬combined cutting and welding torch 混合室mixing chamber喷射器injector焊嘴welding nozzle; welding tip液氧气化器oxygen evaporator气瓶gas cylinder乙炔瓶acetylene cylinder阀罩cylinder cap气瓶阀cylinder valve汇流排cylinder manifold减压器pressure regulator; gas regulator单级减压器single stage regulator两级减压器two stage regulator回火防止器flashback arrestor干式回火防止器dry flashback arrestor水封式回火防止器water-closing type arrestor净化器purifier乙炔发生器acetylene generator低压乙炔发生器low pressure acetylene generator热剂焊thermit welding (TW)热剂补焊thermit repair welding钢轨热剂焊thermit rail welding热剂thermit powder热剂钢水thermit steel热剂反应thermit reaction热剂溶渣thermit slag热剂铸模thermit mold; mold for thermit weld热剂坩埚thermit crucible焊筋collar水下焊underwater welding水下气体保护电弧焊underwater gas shielded arc welding水下等离子弧焊underwater plasma arc welding温式水下焊wet method underwater welding干式水下焊dry method underwater welding局部干式水下焊local dry underwater welding水帘局部干式水下焊water curtain type dry underwater welding 遥控水下焊remote controlled underwater welding电弧空腔arc bubble电阻焊resistance welding (RW)点焊spot welding; resistance spot welding凸焊projection welding缝焊seam welding滚点焊roll-spot welding连续点焊stitch welding多点焊multiple spot welding手压点焊push welding; poke welding脉冲点焊pulsation spot welding; multiple-impulse welding 双面点焊direct spot welding单面点焊indirect spot welding串联点焊series spot welding多点凸焊multiple projection welding频道进缝焊step-by-step seam welding压平缝焊mash seam welding串联缝焊series seam welding对接缝焊butt seam welding; foil-butt seam电阻对焊upset butt welding闪光对焊flash butt welding (FBW)储能焊stored energy welding电容储能点焊condenser discharge spot welding高频电阻焊high frequency resistance welding冲击电阻焊percussion welding胶接点焊spot weld-bonding; weld-bonding闪光flashing; flash过梁bridge; lintel顶锻upsetting; upset夹紧力clamping force顶锻力upsetting force; upset force电极压力electrode force; electrode pressure电极滑移electrode skid焊接循环welding cycle预压时间squeeze time锻压时间forge-delay time; forge time焊接通电时间（电阻焊）welding time (resistance welding) 预热时间preheat time加热时间heat time冷却时间cool time间歇时间quench time; chill time回火时间temper time维持时间hold time休止时间off time闪光时间flash time; flashing time顶锻时间upset time; upsetting time有电顶锻时间upset current time无电顶锻时间upset current-off time闪光速度flashing speed闪光电流flashing current; flash current顶锻电流upset current预热电流preheat current回火电流temper current调伸长度initial overhange; extension总留量total allowance闪光留量flash allowance顶锻留量upset allowance顶锻速度upset speed电极接触面electrode contact surface贴合面faying surface焊点welding spot熔核nugget熔核直径diameter of nugget。
英汉无损检测专业词汇汇编
英汉无损检测专业词汇汇编夏纪真编Aa cluster of flaws 密集区缺陷ablution 清洗Absorbed dose 吸收剂量Absorbed dose rate 吸收剂量率A.C magnetic saturation 交流磁饱和acceptance specification 验收规范Acceptanc limits 验收范围Acceptance level 验收水平验收标准Acceptance standard 验收标准Accessories 附件配件辅助设备辅助器材Accumulation test 累积检测Accuracy 精确度准确度acetone 丙酮Acoustic emission count 声发射计数Acoustic emission transducer 声发射换能器Acoustic emission (AE) 声发射Acoustic holography 声全息术Acoustic impedance 声阻抗Acoustic impedance matching 声阻抗匹配Acoustic impedance method 声阻法Acoustic wave 声波Acoustic-ultrasonic 声-超声（AU）Acoustical lens 声透镜across 交叉横过Activation 活化Activity 活度Adequate shielding 适当防护、适当屏蔽address: 地址:?additional stress 附加应力AE 声发射air header 集气管air set 空气中凝固, 常温自硬自然硬化air supply 气源aisle 过道走廊alkaline battery 碱性电池alarm level 报警电平alarm condition 报警状态Alignment 对准定位调整校直allowable variation 允许偏差容许变化alternating current 交流电aluminum powder 铝粉amount 数量Ampere turns 安匝数amplifier panel 放大器面板Amplitude 振幅、幅度anchor bolt 锚定螺栓地脚螺栓analyzer 分析器Angle beam method 斜射法、角波束法Angle beam probe 斜探头、角探头Angle of incidence 入射角Angle of reflection 反射角Angle of spread 扩散角Angle of squint 偏向角、偏斜角Angle probe 斜探头、角探头Angstrom unit 埃(长度单位)angle square 角尺angle iron 角钢角铁angle steel 角钢angle fitting 弯头appearance 外观application drawing 操作图应用图arc welding 电弧焊arc cutting 电弧切割arc gouging 电弧刨削arc starting 起弧Area amplitude response curve 面积振幅响应曲线Area of interest 评定区、关注区域argon arc welding 氩弧焊Arliflcial disconlinuity 人工不连续性、人工缺陷arrangement diagram 布置图arrival time interval（Δtij）到达时间差(Δtij) Artifact 人为缺陷Artificial defect 人工缺陷A-scan A型扫描A-scope A型显示assembly 装配Attenuation coefficient 衰减系数Attenuator 衰减器Audible leak indicator 音响泄漏指示器Automatic testing 自动检测Autoradiography 自动射线照相术automatic temperature recorder 温度自动记录器axonometric drawing 轴测图axiality 同轴度轴对称性Bback-feed 反馈background 背景本底background target 目标本底backwall echo 底波底面回波baiting valve 放料阀banjo fixing 对接接头band plate 带板Barium concrete 钡混凝土Barn 靶Base fog 片基灰雾Bath 槽液、浴池、槽base material 基底材料basic sensitivity 基准灵敏度Bayard-Alpert ionization gage B-A型电离计Beam 声束、光束Beam ratio 光束比Beam angle 波束角、束张角Beam axis 声束轴线Beam path location 声程定位、声束路径位置Beam path 声程、声束路径Beam spread 声束扩散bellow type 波纹管式beveled edges 坡口Bending 挠曲弯曲beveling 磨斜棱磨斜边成斜角bending deformation 挠曲变形弯曲变形Betatron 电子感应加速器Bimetallic strip gage 双金属片计Bid 投标出价bend 弯管弯头弯曲Bipolar field 双极磁场Black light filter 黑光滤波器、黑光过滤片bisectrix 等分线Black and White Transmission Densitometer 黑白透射密度计Black light 黑光，紫外光Blackbody 黑体Blackbody equivalent temperature 黑体等效温度Bleakney mass spectrometer 波利克尼质谱仪blowhole 喷水孔通风孔通气孔(气)孔铸孔砂[气]眼气泡Bleedout 渗出、漏出blind 挡板窗帘blinding plate 盲板blind plate 隔离盲板盲板block up 封堵垫高bolt 螺栓螺钉bolton 螺栓紧固bonding wire 接合线焊线boost pressure 升压bottom plate 底板Bottom echo 底波底面回波both sides welding 双面焊接Bottom surface 底面Boundary echo 边界回波、界面回波Brand name 商标名称品牌branch connection 分支接续分支连接Bremsstrahlung 轫致辐射Broad-beam 宽射束宽（声、光）束bridge 桥breaking of contact 断接卡Brush application 刷涂B-scan presentation B型扫描显示B-scan B型扫描B扫描B-scope B型显示buckling deformation 翘曲变形buckle 满扣扣住buried depth 埋深butt joint 对接butt jointing 对接接头burn through 烧蚀烧穿butt weld 对接焊缝butt welding 对接焊bus duct 母线槽CC-scan C型扫描C扫描C-scope C型显示C-shape detector C型探测器（X射线实时成像）cable fitting电缆配件cable routing电缆路由选择cable gland 电缆衬垫cable tray 电缆盘cable armor 电缆铠装Cable sheath 电缆包皮层cable testing bridge 电缆测试电桥cable laying 电缆敷设cable channel 电缆槽电缆管道cable trunk 电缆管道电缆主干线Capping ends 顶盖末端calculation sheet 计算书calorimeter 热量计Calibration instrument 校准仪器Capillary action 毛细管作用Calibrated Density Reference Scale 标准密度校验片carbon steel tube 碳钢管carbon steel 碳钢Carrier fluid 载液Carry over of penetrate 渗透剂转入cascade connection 串联连接Cassette 暗盒Cathode 阴极cathodic protection system 阴极保护系统caulking metal 填隙合金[金属](材料)CCD Camera 电荷耦合摄像机center line 中心线center plate 中心板拨盘centralized 集中的cement lined piping 水泥衬里管线channel bases沟渠基底center bearing bracket 中心支架certification of fitness 质量合格证书Charge Coupled Device 电荷耦合器件（简称CCD）Central conductor 中心导体中线（三相四线制）Central conductor method 中心导体法centripetal canting pull rope 向心斜拉索channel steel expansion ring 槽钢胀圈Characteristic curve 特性曲线Characteristic curve of film 胶片特性曲线Characteristic radiation 特征辐射标识辐射Chemical fog 化学灰雾check against 检查, 核对chipping 修琢check valve 止回阀chronometer精密计时表Ci 居里Cine-radiography 射线(活动)电影摄影术连续射线照相Circuit breaker断路开关circular array 圆形阵列circumferential weld 环焊缝Circumferential coils 圆环线圈Circumferential field 周向磁场环形磁场Circumferential magnetization method 周向磁化法circumferential joint 周圈接缝civil engineer 土木工程师civil works 土建工程建筑工程Clean 清理clamp 夹钳clamping fixture 胎具夹具Clean-up 清除Clearing time 定透时间coaxial cable 同轴电缆cockle stairs 螺旋梯Coercive force 矫顽力Coherence 相干性Coherence length 相干长度（谐波列长度）Coil test 线圈试验Coil size 线圈尺寸Coil spacing 线圈间距Coil technique 线圈技术线圈法Coil method 线圈法Coil reference 线圈参考（参照线圈）Coincidence discrimination 符合性鉴别一致性鉴别cold lap 冷隔Cold-cathode ionization gage 冷阴极电离计collar extension 环口Collimation 准直Collimator 准直器collision 碰撞冲突color identification 彩色识别Combined colour contrast and fluorescent penetrant 着色荧光渗透剂commencement 开始component part 构件(组合)零件部件Compressional wave 压缩波Compressed air drying 压缩空气干燥comprehensive analysis and judgement 综合分析判断compression pump 压缩机压气机[泵]compression joint 压接压力接合comply with 遵守company 公司Compton scatter 康普顿散射Computed Radiography(CR)计算机辅助射线成像技术condensation 冷凝conduit box [电]导管分线匣conducting wire 导线conductive paste 导电膏conduit outlet 电线引出口conduit entry 导管引入装置connector 接线器连接器Console 控制台consumable insert （焊接）自耗嵌块construction work 施工工程content gauge 液位计contactor 触头接触器触点开关Contact pads 接触垫Continuous emission 连续发射Continuous linear array 连续线性阵列Continuous method 连续法Continuous spectrum 连续谱Continuous wave 连续波Continuously Welded (CW) 连续焊Contrast stretch 对比度扩展Contrast 对比度衬度Contrast agent 对比剂造影剂Contrast aid 反差增强剂Contrast sensitivity 对比灵敏度Control echo 控制回波Copper intensifying screens 铜增感屏control 控制控制器control wiring 控制线路control cable控制电缆操纵索control console 控制台control unit 控制单元control valve actuator 阀控传动机构control valve控制阀convexity 凸面convenience receptacle 电源插座core rod 芯棒corresponding 相应的cotton fibre 棉质纤维Couplant 耦合剂Coupling 耦合Coupling medium 耦合介质Coupling losses 耦合损失CR(Computed Radiography)计算机辅助射线成像技术Cracking 破裂裂纹裂化裂解Creeping wave 爬波蠕变波crate 板条箱柳条箱crater crack （焊接）弧坑裂纹Critical angle 临界角Cross section 横截面Cross talk 串音Cross-drilled hole 横孔crossed yoke 交叉磁轭Crystal 晶片晶体Curie point 居里点cubicle 室,箱cushion 垫层衬垫Curie temperature 居里温度Curie(Ci) 居里Current flow method 通电法电流法Current induction method 电流感应法current attenuation 电流衰减Current magnetization method 电流磁化法Cut-off level 截止电平Cutting 切割cutting opening 切孔切开CW (Continuously Welded) 连续焊DDark room packing 暗室包装（在暗室条件下将X射线胶片装入暗盒）data logger 数据记录器datum mark 基准点Dead zone 盲区死区Decay curve 衰变曲线Decibel(dB) 分贝Defect 缺陷Defect resolution 缺陷分辨力defect evaluation zone 缺陷评定区Defect detection sensitivity 缺陷探测灵敏度Definition 清晰度定义Demagnetization 退磁Demagnetization factor 退磁因子退磁系数Demagnetizer 退磁装置退磁器Densitometer 黑度计密度计Density 黑度（底片）密度Density Strip 黑度比较片密度比较条Density comparison strip 黑度比较片密度比较条depth scan 深度扫描description 说明描述design pressure 设计压力Detecting medium 检验介质Detergent remover 洗净液去垢剂Developer 显像剂显影剂Developer station 显像工位显影台Developer aqueous 水性显像剂Developer dry 干式显象剂Developer liquid film 液膜显象剂Developer nonaqueous（suspend）非水（悬浮）显象剂Developing time 显像时间显影时间Development 显影differential discriminator (电子)差动式鉴频器Diffraction mottle 衍射斑点衍射斑纹Diffuse indications 扩散指示Diffusion 扩散漫射Digital image acquisition system 数字图像采集系统Digital display 数字显示数显Dilatational wave 膨胀波疏密波Digital timer for darkroom 暗室用计时器（在暗室中可调及报警）Digital Thermometer 数字温度计（用于测定胶片处理液的温度）dimensional inspection 尺寸检验digital detector 数字探测器（X射线实时成像）Digital Radiography（DR）数字射线成像技术Dip and drain station 浸渍和流滴工位浸渍与滴落台Direct contact magnetization 直接接触磁化Direct exposure imaging 直接曝光成像Direct contact method 直接接触法directional beam 定向辐射（指定向辐射的工业X射线机）Directivity 指向性disassembly and assembly 拆装Discontinuity 不连续性Distance-gain-size DGS曲线（距离-增益-尺寸曲线）（DGS德文为A VG）Distance marker 距离标志distribution board 配电盘, 配电屏Dose equivalent 剂量当量dosimeter 剂量计Dose rate meter 剂量率计Dosemeter 剂量计Double crystal probe 双晶探头Double probe technique 双探头法doubleskin 重皮dose 剂量Double transceiver technique 双发双收法Double traverse technique 双光路技术down lead 引下线DR（Digital Radiography）数字射线成像技术Dragout 废酸洗液Drain time 滴落时间排液时间drain 排水管排水沟排水道排水draught 气流drying 烘干Drift 漂移Dry method 干法Dry powder 干粉Dry technique 干法Dry developer 干式显像剂Dry developing cabinet 干式显像柜Drying oven 干燥箱干燥炉Drying station 干燥工位干燥台Drying time 干燥时间D-scan D型扫描D-scope D型显示dual element transducers 双晶探头双晶片换能器Dual search unit 双探头双探测装置双探测器Dual-focus tube 双焦点(X射线)管due date 到期日预定日期duplicate part 备件Duplex-wire image quality indicator 双线像质指示器双线像质计Duplex wire type Image Quality Indicator 双线型像质指示器双线像质计Duration 持续时间Dwell time 停留时间Dye penetrant 着色渗透剂dye penetrant examination 着色渗透检验Dynamic leak test 动态泄漏检测Dynamic leakage measurement 动态泄漏测量Dynamic range 动态范围Dynamic radiography 动态射线照相法Eearth wire 接地线地线earthing device 接地装置earthing pole 接地极earth resistance 接地电阻Echo 回波Echo frequency 回波频率Echo height 回波高度Echo indication 回波指示Echo transmittance of sound pressure 声压往复透过率Echo width 回波宽度echodynamic patterns 回波动态波型Eddy current 涡流涡电流eddy current coil 涡流检测线圈Eddy current flaw detector 涡流探伤仪Eddy current testing 涡流检测eddy current probe 涡流检测探头Edge 边缘棱边Edge effect 边缘效应Edge echo 棱边回波Effective focus size 有效焦点尺寸Effective depth penetration （EDP）有效穿透深度有效透入深度Effective magnetic permeability 有效磁导率Effective resistance 有效电阻Effective permeability 有效磁导率有效渗透率相对渗透率Effective reflection surface of flaw 缺陷有效反射面Elastic medium 弹性介质elbow 弯管接头管肘Electric displacement 电位移electric heat tracing 电伴随加热electric force compounded grease 电力复合脂electric pressure 电压electric machine 电机electrified 带电Electrical center 电中心Electrode 电极电焊条electrical panel 配电板,配电盘electrical material电气材料electrical appliance 电器Electronic scanning (E-scans) 电子扫描（E-扫描）Electromagnet 电磁铁electron linear accelerator 电子直线加速器Electronic linear scans (E-scans) 电子线性扫描Electrolytic Sliver recovery unit 电解银回收装置（从定影液中回收银）Electro-magnetic acoustic transducer 电磁声换能器Electromagnetic induction 电磁感应Electromagnetic radiation 电磁辐射Electromagnetic testing 电磁检测Electro-mechanical coupling factor 机电耦合系数Electron radiography 电子辐射照相术Electron volt 电子伏恃Electronic noise 电子噪声Electrostatic spraying 静电喷涂Emulsification 乳化E-mail: 电子邮件:? 电子邮箱:embedded part 预埋件嵌入[埋置]部分Emulsification time 乳化时间Emulsifier 乳化剂emission count （声）发射计数Encircling coils 环形线圈End effect 端部效应端点效应Energizing cycle 激励周期enfoldment 折迭end socket 端头, (钢索的)封头envelope 包络包迹environment visible light 环境可见光Equalizing filter 均衡滤波器平衡滤波器equipment 器材设备Equivalent 当量Equivalent I.Q.I. Sensitivity 当量象质指示器灵敏度Equivalent nitrogen pressure 等效氮压当量氮气压力Equivalent method 当量法Equivalent penetrameter sensifivty 当量透度计灵敏度erection 架设Erasabl optical medium 可消光介质Etching 浸蚀腐蚀侵蚀蚀刻Evaluation 评定Evaluation threshold 评价阈值评定阈Event count 事件计数Event count rate 事件计数率examination 试验检验考试examine and approve 审批Examination area 检验范围Examination region 检验区域exfoliation 剥落脱落Exhaust pressure/discharge pressure 排气压力/排放压力出口压力输送压力Exhaust tubulation 排气管道Expanded time-base sweep 时基线展宽时基扫描扩展expansion joint 伸缩接头expansion bolt 伸缩栓, 扩开螺栓Exposure 曝光Exposure table 曝光表Exposure chart 曝光曲线Exposure fog 曝光灰雾Exposure 曝光Extended source 扩展源延长源Exposure and darkroom accessories 曝光与暗室附件external diameter 外径external diameter of the pipe 管子直径eye survey 目测Ffabrication tolerance 制造容差fabrication 加工制造fabrication drawing 制造图纸制作图fall off 脱落Facility scattered neutrons 易散射中子False indication 假指示虚假指示伪显示虚假显示Family 族系列Far field 远场Fast/slow timing Oscilloscope 带快慢调速的示波器Fast neutron detectors 快中子探测器FBH 平底孔(缩写)Fax: 传真:?Feed-through coil 穿过式线圈Field 场（磁场、声场）feeder 馈电线field installation 现场安装field instrument 携带式仪表field fabricated 工地制造的现场装配的ferritic 铁素体的filament 灯丝Fill factor 填充系数fillet weld 角焊填角焊filler rod 焊条filler metal 焊料焊丝filling water test 充水试验film density 胶片密度，底片黑度Film viewing equipment 评片装置（观片灯）film evaluation scope 底片评定范围Film speed 胶片速度(胶片感光速度胶片感光度)Film badge 胶片剂量计Film base 片基film cassette 胶片暗盒Film contrast 胶片对比度Film gamma 胶片γ值（胶片灰度系数）Film processing 胶片冲洗加工底片处理Film Hangers for manual processing 洗片架（手工洗片的胶片挂架）Film Hangers （Clip Type）夹式洗片架（手工洗片的一种洗片架类型）Film Hangers （Channel Type）槽式洗片架（手工洗片的一种洗片架类型）Film processing chemicals 胶片处理药品洗片药品Film unsharpness 胶片不清晰度Film viewing screen 胶片观察屏film viewer 底片评片灯观片灯底片观察用光源Film marking equipment 胶片标记器材Filter 滤波器滤光板过滤器Final test 最终检验Fixing 固定fire barriers 防火间隔防火屏障flange joint 凸缘接头flange connection 凸缘联接flange gasket 法兰垫片flange 边缘轮缘凸缘法兰flange sealing surface 法兰密封面Flaw echo 缺陷回波Flat-bottomed hole 平底孔Flat-bottomed hole equivalent 平底孔当量Flaw 伤缺陷瑕疵裂纹Flaw characterization 伤特性缺陷特征flaw height(thru-wall dimension) 缺陷自身高度（缺陷在壁厚方向的尺寸）flash plate 闪熔镀层Flexural wave 弯曲波flexible conduit 软管flicker-free images 无闪烁图像Floating threshold 浮动阀值Fluorescence 荧光floor slab 楼板flow sheet 流程图flow instrument 流量计flushing 冲洗填缝flux 焊剂，熔化flux cored arc welding 带焊剂焊丝电弧焊Fluorometallic intensifying screen 荧光金属增感屏Fluorescent examination method 荧光检验法Fluorescent magnetic particle inspection 荧光磁粉检验Fluorescent dry deposit penetrant 干沉积荧光渗透剂Fluorescent light 荧光荧光灯Fluorescent magnetic powder 荧光磁粉Fluorescent penetrant 荧光渗透剂Fluorescent screen 荧光屏Fluoroscopy 荧光检查法fluorography 荧光照相术Flux leakage field 磁通泄漏场漏磁场Flux lines 磁通线Focal spot 焦点Focal distance 焦距Focus length 焦点长度聚焦长度Focus size 焦点尺寸聚焦尺寸Focus width 焦点宽度聚焦宽度Focus electron 电子焦点聚焦电子束Focused beam 聚焦束（声束、光束、电子束）Focusing probe 聚焦探头Fog 灰雾Focus-to-film distance(f.f.d) 焦点-胶片距离（焦距）Fog density 灰雾密度Footcandle 英尺烛光formula 公式foundation ring 底圈foundation settlement 基础沉降Freguency 频率Frequency constant 频率常数Fringe 干涉带干扰带条纹边缘Front distance 前沿距离Front distance of flaw 缺陷前沿距离full-scale value 满刻度值Full-wave direct current（FWDC）全波直流Fundamental frequency 基频Furring 毛状迹痕毛皮fusion 熔融熔合fusion arc welded 熔弧焊GGage pressure 表压表压力gage glass 液位玻璃管Gain 增益gamma camera γ射线照相机（γ射线探伤机）gamma eq uipment γ射线设备Gamma radiography γ射线照相术Gamma ray source γ射线源Gamma ray source container γ射线源容器Gamma rays γ射线Gamma-ray radiographic equipment γ射线照相装置Gamme ray unit γ射线机γ射线装置gamma source γ射线源γ源Gap scanning 间隙扫查间隙扫描Gas 气体gas cutting 气割gas shielded arc welding 气体保护焊Gate 闸门Gating technique 选通技术脉冲选通技术gauge board 仪表板样板模板规准尺Gauss 高斯Geiger-Muller counter 盖革.弥勒计数器generating of arc 引弧Geometric unsharpness 几何不清晰度girth weld 环形焊缝gland bolt 压盖螺栓Goggles 护目镜gouging 刨削槽Gray(Gy) 戈瑞Grazing incidence 掠入射切线入射Grazing angle 掠射角切线角入射余角grind off 磨掉grinder 磨床磨工grinding wheel 砂轮片砂轮groove face （焊缝）坡口面grounding conductor 接地导体Group velocity 群速度grouting 灌（水泥）浆guide wire 尺度[定距]索,准绳gusset plate角撑板, 加固板IIACS =International Annealed Copper Standard 国际退火(软)铜标准ice 冰ice chest 冰箱ice machine 制冰机，冷冻机iconoscope 光电摄像管ID (①inside ②inside dimensions) ①内径②内部尺寸ID coil ID线圈=Inside Diameter 内径线圈Image definition 图像清晰度idea 概念，意见，思想ideal 理想的，想象的identical 同一的，恒定的，相同的identification 鉴定，辨别，验明identification mark 识别标志identifier 鉴别器identify pulse 识别脉冲idiopathetic 自发的，特发的IEM (ion exchange membrane) 离子交换膜I.F. (intermediate frequency) 中频（30～3000千周/秒）illuminance 照（明）度illuminant 照明的，发光的illuminating lamp 照明灯泡illuminating loupe 放大照明镜illuminating mirror 照明镜illumination 照明的，照射illumination apparatus 照明器illumination plate 照明板illuminator ①照明器，照明装置②反光镜illuminometer 照度计illustration(abbr. illus.) 图解，例证，具体说明image amplifier 图像放大器，影像增强器image analysis system 图像分析系统image converter 影像转换器Image contrast 图像对比度影像对比Image enhancement 图像增强image freeze 影像冻结image intensifier 像亮化器，图像增强器image intensifier tube 影像增强管图像增强管image pick-up tube 摄像管Image magnification 图像放大Image quality 图像质量image monitor 图像监视器image multiplier 影像倍增器Image Quality Indicator （IQI）像质计像质指示器Imaging Plates（IP）成像板Image quality indicator sensitivity 像质指示器灵敏度imager 图像仪，显像仪image reproducer 显像管，显像器image quality indication 像质指示Imaging line scanner 图像线扫描器图像行扫描器image store 图像存储器image tube 显像管imagination 想象imagine 想象，推测，设想immediate payment 立即付款immersion 浸没，浸渍Immersion probe 液浸探头Immersion rinse 浸没清洗浸液清洗immersion system 浸渍装置液浸系统Immersion testing 液浸试验Immersion time 浸没时间浸入时间impacter 冲击器impact strength 冲击强度Impedance 阻抗Impedance plane diagram 阻抗平面图impedance matching 阻抗匹配impedance transducer 阻抗传感器，阻抗换能器impeller ①叶轮，转子②压缩机imperial quart 英制夸脱imperial gallon(abbr. ip gal) 英国标准加仑（英制容量单位合4.546升）Imperfection 不完整性缺陷Impulse eddy current testing 脉冲涡流检测import ①进口②输入import and export firm 进出口商行importation ①输入，传入②进口货import border station 进口国境站名import licence position 进口许可证impression 压迹，印模，版impression technic 印模术impression tray 印模盘impulse 冲动，搏动，脉冲impulse generator 脉冲发生器impulse oscilloscope 脉冲示波器impulser 脉冲发生器，脉冲传感器impulse recorder 脉冲自动记录器impulse scaler 脉冲计数器impulse timer 脉冲计数器impulse transmitting tube 脉冲发射管impurity 不纯，杂质In (①indium ②inch) ①铟②英寸（等于25.4毫米）inaction 无作用inadequacy 机能不全，闭锁不全Inc. (incorporated) 股份有限公司incandescent lamp 白炽灯inch(abbr.In;in) 英寸incidence ①入射，入射角②发生率incident angle 入射角incidental 偶发的，非主要的incident illumination 入射光incident light 入射光incident ray 入射光inclination 倾斜，斜度inclined tube type manometer 斜管式压力计include 包括，计入inclusion 包含包埋杂质incoming line 进线口incompatible 不相容的，禁忌的incompetence 机能不全，闭锁不全inconvertible 不可逆的incorporation ①并入②公司increase 增加，增大，增长indent 订单Incremental permeability 增量磁导率Indicated defect area 缺陷指示面积index ①指数，索引②指针index card 索引卡片indexer 指数测定仪，分度器index hand 指针indicated light 指示灯indicating bell 指示铃indicating lamp 指示灯indicator ①指示器，显示器②指针③指示剂indicator paper 试纸indicatrix 指示量，指示线，特征曲线index signal 指示信号indicate 指示，表明Indicated defect length 缺陷指示长度Indication 指示indifferent electrode 无关电极indiffusible 不扩散的indirect export 间接出口indirect import 间接进口indium(abbr.In) 铟individual 个体的，个别的Indirect exposure 间接曝光Indirect magnetization 间接磁化Indirect magnetization method 间接磁化法Indirect scan 间接扫查indoor 室内的induce 引起，感应，诱导induced electricity 感生电，感应电induct 感应，引导，引入inductance 电感，感应系数inductance bridge flowmeter 感应电桥流量计Induced field 感应磁场感生场Induced current method 感应电流法inductance meter 电感测定计induction ①引导，前言②感应，电感③吸气induction apparatus 感应器induction coil 感应线圈inductive transducer 感应传感器inductogram X射线照片inductometer 电感计inductor 感应器，感应机inductorium 感应器inductosyn 感应式传感器industrial(abbr.indust.) 工业的，产品的industrial exhibition 工业展览会industrial robot 工业机器人industry 工业，产业Industrial X-ray films 工业X射线胶片indutrial X-ray machin 工业X射线机industrial radiographic film dryer 工业射线胶片干燥器inert 惰性的，无效的inference 推论，推断infinite 无限的，无穷的infinitesimal 无限小的，无穷小的infinity 无穷大，无限，无限距inflame 燃，着火inflammable 可燃的，易燃的inflation 膨胀，充气，打气inflator 充气机inflow 流入，吸入，进气influence 影响，感应influx 流入，注入inform 报告，通告，告诉information 情报，资料，消息，数据information generator 信息发送器information storage unit 信息存储器infra- 下，低于，内，间infranics 红外线电子学infrared ①红外线的②红外线infrared detector 红外线探测器infrared drier 红外线干燥器infrared equipment 红外线设备infrared furnace 红外线炉infrared gas analyzer 红外线气体分析仪infrared heater 红外线加热器infrared lamp 红外线灯infrared laser 红外激光器infrared light 红外线infrared liner polarizer 红外线直线偏振镜infrared photography 红外摄影术infrared radiation 红外线照射infrared radiator 红外线辐射器infrared rays 红外线infrared spectrophotometer 红外分光光度计Infrared imaging system 红外成象系统Infrared sensing device 红外传感装置infrasonic frequency 次声频infrequent 稀有的，不常见的infrared thermography 红外热成象红外热谱Inherent fluorescence 固有荧光inherent 生来的，固有的，先天的inheritance 遗传，继承inhibition 抑制，延迟，阻滞inhibitor 抑制剂抑制器inhomogeneous 不纯的，不均匀的in-house 自身的，内部的initial 开始的，最初的initial charge 起始电荷initial data 原始数据initiator ①创造人②引发剂Inherent filtration 固有滤波Initial permeability 起始磁导率初始磁导率Initial pulse 始脉冲Initial pulse width 始波宽度始脉冲宽度injection 注射，喷射injection syringe 注射器injector 注射器，喷射器injector pump 注射泵injury 伤，损伤，损害ink 墨水，油墨ink jet printer 墨水喷射印刷机，喷水式打印机ink jet recorder 墨水喷射记录器ink writer 印字机ink writing oscillograph 记录示波仪inlay 嵌体，嵌入inlead 引入线inlet 入口，入线，输入inlet port 入口inner 内部的innocuous 无害的，良性的innovation 革新，改革innumerable 无数的，数不清的ino- 纤维inoperative 无效的，不工作的inorganic 无机的inorganic chemistry 无机化学inosculation 吻合，联合in-out box 输入-输出盒in parallel 并联in phase 同相的input 输入，输入电路input buffer 输入缓冲器input coupler 输入耦合器input device 输入装置input filter 输入滤波器input impedance 输入阻抗input output adapter 输入-输出衔接器input tranformer 输入变压器inscription 标题，注册in series 串联insert ①插入物，垫圈②插入，植入inserter 插入器，插入物insertion 插入insert tube 嵌入式X射线管inset 插页，插图，插入inside 内部，内侧，在……里面Inserted coil 插入式线圈Inside coil 内部线圈Inside-out testing 外泄检测泄出检测Inspection 检查检验insignificant 无意义的，轻微的insolation 曝晒，日照insoluble 不溶解的inspection 验收，检查，商检inspection certificate 检验证明书inspection fee 检验费inspection machine 检验设备inspection standard 检验标准inspector ①测定器②检验员inspectoscope 检查镜Inspection medium 检查介质检验介质Inspection frequency 检测频率inspissator 浓缩器，蒸浓器instability 不稳定性install 安装，装置installation ①安装②装置，设备installation fundamental circle 安装基准圆installing 安装，插入instance 例证，实例，情况instantaneous value 瞬时值，即时值instead 代替，更换instillation 滴注法，灌注institute 学会，协会，研究所institution 机关，机构，学校，制度instruction ①指示，命令②说明，说明书instruction counter 指令计数器instrument 仪器，器械，仪表instrumental error 仪器误差instrumentation ①器械，设备②器械操作法instrument air 仪表气源instrument board 仪表板instrument cabinet 器械柜instrument carriage 器械车instrument case 器械箱instrument cover 仪器外表instrument cupboard 器械柜instrument light 仪表信号灯instrument lubricant 器械润滑剂instrument rack 器械架仪器架instrumenent repairing table 器械修理台instrument stand 仪器架instrument table 器械台，器械桌insulant 绝缘材料insulated cable 绝缘电缆insulated sleeve 绝缘套管insulating oil 绝缘油insulation 绝缘，绝热，隔离insulation resistance 绝缘电阻insulator 绝缘体，绝热体insullac 绝缘漆insusceptible 不受……影响的，不接受……的intact 完整的，未受损伤的integral ①积分（的）②完整的integraph 积分仪integrated circuit(abbr.IC) 集成电路integrated circuit microelectrode 集成电路微电极integrated circuit storage 集成电路存储器integrating dosimeter 累计剂量仪integrating instrument 积分仪，积算仪表integrator 积分仪integrogram 积分图integronics 综合电子设备intellect 智力，才智intensifier ①增强器②照明装置Intensifying factor 增感系数Intensifying screen 增感屏intensimeter X射线强度计intensionometer X射线强度量计intensity 强度intensity level ①强度级（声音）②亮度intensity output 声强输出intensive 加强的，集中的，重点的inter- 在……中间，内，相互interaction 相互影响，相互作用，干扰interception 相交，折射（光）interchange 交替，交换interchanger 交换器intercondenser 中间电容器intercooler 中间冷却器interdiction 禁止，制止interest 兴趣，关心，注意，利益interesting 有趣的interface （计算机）接口界面Interval arrival time （Δtij) 到达时间差(Δtij) Interface boundary 界面interface echo 界面回波interfacial tensiometer 界面张力计interfacial tension 界面张力Interface trigger 界面触发Interference 干涉interference absorber 干扰吸收器interference filter ①干涉滤波器②干涉滤光镜interference preventer 防干扰装置interference refractometer 干涉折射计interference spectroscope 干涉分光镜interferogram 干涉图interferometer 干涉仪，干扰计interferoscope 干涉镜interior 内部，内部的interior angle welding line joint 内侧角焊缝接头intermission 间断间歇interlayer 夹层隔层intermediate frequency(abbr.I.F.) 中频（300～3000千周/秒）internal energy 内能internal exposure 体内照射internal gauge 内径规international(abbr.Int.) 国际的，世界的international candle 国际烛光international fair 国际博览会international market 国际市场international standard 国际标准international treaty 国际条约international unit(abbr. I.U) 国际单位interphase 界面interpolation 插入，内插法interpretation 翻译，解释，说明interpreter 翻译程序，翻译机interrupt 断续，中断interrupter 断流器，断续器interspace 空间，间隙，中间interstage amplifier 级间放大器inter-sync 内同步。
焊接专业网焊接英汉词汇
焊接专业网焊接英汉词典（2）C. arc welding machine 交直流弧焊机welding 交流电弧焊metal-arc welding process 交流熔化极气保护焊tungsten arc welding 交流钨极气保护焊ing set 交流焊机；交流焊接变压器elding machine 交直流两用焊机ne welding 气焊；乙炔焊；乙炔焊接ne welding torch 乙炔焊炬；乙炔接焊吹管tylene welding 空气-乙炔焊接ition welding 全位置焊接teel gas welding rod 合金钢气焊条（焊接网 ）ting current arc welding 交流电弧焊ting current welding machine 交流电焊机um alloy arc welding electrode 铝合金焊条thermic welding 铝热焊；铸焊ackwards welding 后倾焊utt welding 斜口对接焊orwards welding 前倾焊ng welding wave 退火焊波ous welding 氧炔焊us for butt welding 平接压焊夹具ze welding 电弧钎焊gas shielded welding 气体保护焊gas torch welding 气炬焊gas tungsten arc welding 气体保护钨极电弧焊gas tungsten-arc welding 气保护钨极电弧焊gas tungstun arc welding 钨极气体保护焊gas welding 气焊；乙炔焊gas welding device 气焊设备gas welding equipment 气焊设备gas welding machine 气焊机gas welding outfit 气焊机gas welding rod 气焊焊丝gas welding rubber hose 气焊橡胶管gas welding technique 气焊工艺gas welding torch butt 气焊进气硬管gas welding tube mill 瓦斯焊接机gas welding work 气焊工作gas-arc welding 气电焊；气体保护电弧焊gas-arc welding gun 气电焊焊嘴gas-press welding 气压焊gas-pressure welding machine 气压焊接机gas-shielded stud welding 气保护柱钉焊接girth welding 环缝横向焊接gravity type arc welding 重力焊sh welding 电弧闪光焊t welding 电铆焊d welding 柱钉电弧焊；螺柱电弧焊tage feedback controlling arc welding 弧压反馈电弧焊ding 电弧焊；电弧焊接；弧焊ding electrode 电弧焊条ding generator 电弧焊接用发电机；弧焊发电机ding generator with independent excitation 自激弧焊发电激电焊发电机ding generator with self-excitation 自激电焊发电机ding machine 弧焊机；电焊机；电弧焊机ding mask 电弧焊遮罩ding process 电弧焊接工艺过程ding rectifier 弧焊整流器ding robot 弧焊机器人ding set 电弧焊机组ding transformer 弧焊变压器ding electrode 电弧焊用焊条ding plant 电焊厂welding 电弧氧乙炔焊shielded) arc welding 氩弧焊接ungsten-arc welding 钨极氩弧焊rc welding 氩弧焊t welding 自动氩弧焊gravity type welding 倚焊gravity welding 重力焊；重力式电弧焊groove welding 槽焊；坡口焊；开槽焊guided automatic welding 导向自动焊接gun welding machine 手提式点焊机；点焊枪hafnium welding wire 铪焊丝hammer welding 锻焊；锻接；锤焊hammered resistance welding 锤锻电阻焊；电阻加热锻焊hand welding holdet 手焊焊把hard-welding 硬质合金熔焊headless bolt for welding 焊接单头螺栓heat-welding adhesive 热熔性胶粘剂heated-tool welding 热烙铁焊接heavy welding 大断面焊接heavy welding electrode 粗电焊条heliarc welding 氦电弧焊Heliarc welding 氦弧焊法helium arc welding 氦弧焊HF welding magnetic bar 高频焊接磁棒hidden arc welding 埋弧焊；潜弧焊high current arc welding 大电流弧焊high frequency AC welding machine 高频交流电焊机high frequency dielectric welding 高频介电焊high frequency induction welding 高频感应焊H welding 氢原子焊hydrogen welding 原子氢焊hydrogen welding 原子氢焊接te welding 不锈钢焊接ous pressure welding 自动压合热焊ous welding 气焊ic arc welding head 自动电弧焊接机头ic arc welding machine 自动电焊机；自动弧焊机ic drying line for welding electrode 电焊条自动烘焙线ic slag pool welding 自动电渣焊ic spot welding 自动点焊ic submerged arc welding 自动埋弧焊ic submerged slag welding of rail 钢轨自动埋弧电弧焊ic submerged-arc welding machine 埋弧自动焊机ic transverse welding 横向自动焊ic welding 自动焊；自动焊接ic welding head 自动焊头ic welding machine 自动焊接机ic welding of circumferential seams 环缝自动焊ic welding process 自动焊接工艺规程ion of welding 焊接自动化nd welding 后退焊；反手焊接ep welding 反手焊接rd welding 反手焊接high frequency welding 高频焊接high grade energy welding 高能焊high tensile electric welding rod 高强焊条high-current plasma arc welding 大电流等离子弧焊high-frequency induction welding 高频感应焊接；高频焊接high-frequency resistance welding 高频接触焊high-frequency resistance welding (HFRW)高频电阻焊high-frequency welding 高频电焊highspeed welding 快速焊接horizontal fillet welding 横角焊；水平角焊horizontal position welding 水平焊接；横焊horizontal welding 横焊；水平焊horizontal-position welding 水平位置焊接horizontal-rolledposition welding 水平转动焊接；滚动水平hot jet welding 热风焊接hot press welding 热压焊接hot pressure welding 预热压力焊hot welding 热焊hot wire welding 热丝焊hot(-)gas welding 热气焊接hot-gas welding 热风焊接；热空气焊接hot-pressure welding 热压焊；热压焊接hydrogen-welding 氢焊impact spot welding 冲击点焊法lding 底焊；退焊法ep welding 分段退焊法d welding 逆向焊；右焊法；后焊法；向后焊welding 打底焊p welding 分段逆焊；分段退焊；反向焊；逐步退焊法；逆向焊p welding sequence 分段退焊次序d welding 后倾焊；后退焊；向右焊d welding 对称焊lding rod 光焊条re arc welding 光焊丝电弧焊lding 窄焊道焊接rc welding machine 台式弧焊机elding 斜角焊ith welding 锻工焊接；锻焊equence welding 分段多层焊；分段连续焊接elding 块焊接elding sequence 分段多层焊lding machine 罐身焊接机des welding 双面焊接elding rod 黄铜焊条elding 钎焊；钎焊接；钎接；铜焊elding 钎接焊spot welding 带接合板点焊；单面衬垫点焊；单面搭板点焊welding 桥接焊；盖板焊impregnated-tape metal-arc welding 浸焊条金属弧焊impulse current automatic butt welding machine 脉冲电流自机impulse current seam welding machine 脉冲电流缝焊机impulse current semiautomatic butt welding machine 脉冲电动对焊机impulse electromagnetic automatic welding machine 电磁脉焊机impulse plasma welding machine 脉冲等离子焊机impulse welding 脉冲焊；脉冲焊接impulsed spot welding 脉冲点焊inclined position welding 倾斜焊indirect (spot) welding 单面点焊indirect welding 单面点焊induction welding 感应焊；感应焊接；感应熔焊inert gas arc spot welding 惰性气体电弧点焊inert gas arc welding 惰性气体电弧焊inert gas spot welding 惰性气体保护电弧点焊inert gas welding 惰性气体焊接法inert-gas (inert gas) arc welding 惰性气体保护焊inertia welding 惯性焊接；贮能摩擦焊；储能摩擦焊inertial welding 惯性焊接infrared welding 红外线焊接intermediate current plasma arc welding 中电流等离子弧焊elding 硬焊built) up welding 堆焊p welding 堆焊g-up by welding 堆焊sistance welding 电阻对焊；对接电阻焊am welding 对接滚焊am welding machine 对接缝焊机lding 对接焊；平对焊lding machine 对接焊机lding process 对接焊法lding 对接焊lding machine 对焊机ity of welding vertically upwards 直上焊接能力or-discharge welding 电容放电焊接arc welding 碳弧焊；碳极弧焊in materials for welding 焊接用材料中的碳dioxide arc welding 二氧化碳保护焊e of automatic welding machine 自动焊机走架welding 阶梯式焊；山形多层焊welding sequence 串级叠置法lding 铸焊welding 金属陶瓷焊接ized installation of welding machine 多站焊接ntermittent fillet welding 并列断续角焊缝；链式断续角焊intermittent fillet welding 断续角焊intermittent point welding 断续点焊intermittent welding 断续焊International Institute of welding (IIW)国际焊接学会inverted welding 仰焊joint welding 搭焊jump welding 丁字形焊keyhole-mode welding 小孔型等离子弧焊；穿透型焊接法lap fillet welding 搭角焊；搭接角焊lap resistance welding 搭接电阻焊lap seam welding 搭接缝焊；搭接焊lap welding 搭焊；搭接焊laser welding 激光焊接laser welding chamber 激光焊接室laser welding head 激光焊接头laser welding machine for orthodontics 激光口腔矫形焊接机laser welding system 激光焊接系统laser-beam welding machine 激光焊接机laser-welding machine 激光焊接器lead welding 铅焊lefthand welding 左焊法leftward welding 左向焊法lever gun welding head 杠杆式点焊钳light beam welding machine 光束焊机l welding 化学焊r seam welding 环缝对接焊r seam-welding machine 环形滚焊机g before welding 焊接前的清理g of welding deposits 焊接沉积的清理butt gas pressure welding 闭式加压气焊lding 冷焊；冷压焊essure welding 冷压焊d cutting and welding torch 焊割两用炬d cutting and-welding blow-pipe 焊割两用炬d thermit welding 加压铸焊e penetraction and fusion in welding 全焊透er (discharge) spot-welding machine 电容器放电点焊机er discharge spot welding 电容储能点焊；电容贮能点焊t current welding machine 恒流电焊机t energy welding machine 恒功率电焊机t voltage welding machine 恒压电焊机t-current arc welding power source 垂降特性弧焊电源t-current welding source 恒流式焊接电源t-power welding source 恒功率式焊接电源t-pressure pressure welding 恒压压力焊t-temperature pressure welding 恒温压力焊t-voltage welding machine 恒电压焊机t-voltage welding source 恒压式焊接电源；平特性焊接电源light continuous welding 轻连续焊接light gauge welding 薄板焊接light ray welding 光束焊接light welding 轻焊接Linde welding 林德钢管对焊法line welding 直线焊缝焊接liquid metal welding 浇注补焊longitudinal resistance seam welding 纵向电阻缝焊longitudinal seam welding 纵缝焊接；纵向缝焊longitudinal welding 纵缝焊接；纵向焊接low carbon steel welding electrode 低碳钢电焊条low carbon welding wires 低碳焊接线材low idle voltage arc-welding power supply 低空载电压的弧low temperature welding 低温焊接low-alloy steel covered arc welding electrode 低合金钢焊low-current plasma arc welding 小电流等离子弧焊low-hydrogen welding electrode 低氢型电焊条low-temperature welding 低温焊接lowest permissible temperature for welding 焊接允许的最低machine for magnetic welding 磁力焊接机machine welding 机器焊接machine welding torch 机械焊接吹管magnetic discharge welding 电磁储能焊；电磁焊magnetic flux arc welding 磁性焊剂电弧焊ble electrode welding 熔化极电弧焊ble guide electroslag welding 自耗定向电渣焊welding 接触焊ous feed welding 连续送丝电弧焊ous welding 连续焊；连续焊接welding 绕焊led arc welding 可控电弧焊接led atmosohere arc welding 充气室电弧焊led atmospere arc welding 充气式电弧焊led tungsten-arc welding 自动控制弧长的钨极电弧焊led-transfer welding 可控过渡电弧焊fillet welding 凸面角焊缝arc welding electrode 铜焊条welding rod 铜焊条alloy arc welding electrode 铜合金焊条aluminium welding rod 铜铝焊条nickel welding rod 铜镍焊条silicon welding rod 铜硅焊条tin welding rod 铜锡焊条zinc welding rod 铜锌焊条lding-wire 焊芯re for welding rod 焊条芯线on due to welding 焊接腐蚀c welding 盖面焊magnetic flux gas shielded arc welding 磁性焊剂气体保护电magnetic force welding machine 磁力焊接机magnetic-force welding 磁力焊接法manual arc welding 手工电弧堆焊manual electic arc pile up welding 手工电弧堆焊manual electric arc welding 手工电弧堆焊manual electro-slag welding 手工电渣焊manual gas welding 手工气焊manual metal-arc welding 手弧焊manual TIG welding 手工钨极惰性气体保护焊manual welding 手工焊接；人工焊接manual welding machine 手工焊机manually coating welding electrode 手涂焊条mash seam welding 滚压电阻缝焊mash stitch welding 多针缝式焊接mask welding 电焊眼罩match assemble welding 装架焊接metal arc welding 金属电弧焊metal buried welding 埋渣焊metal inert gas arc welding (MIG)惰性气体金属电弧焊metal inert-gas arc welding 金属极惰性气体保护焊metal inertia gas welding 金属焊条惰性气体保护焊；熔化极体保护焊metal rectifier welding set 整流焊机hain welding 链节式药皮包丝焊接welding machine 二氧化碳弧焊机g test for automatic welding 自动焊抗裂试验aft flashbutt welding 曲轴电阻弧花压焊elding 横向焊缝welding 圆环电弧焊lding 重力焊llet welding 深角焊netration welding 深熔焊netration welding electrode 深熔焊条lding 深焊ding 模焊；冲模堆焊engine driven DC arc welding machine 柴油机驱动直流弧焊ntial-excited welding generator 差激电焊发电机on welding 扩散焊接spot welding 双面点焊welding 双面点焊on of welding 焊接方位；焊接方向inuous welding 断续焊ding 点焊carbon-arc welding 间接碳弧焊side welding 双面焊接nd welding 俯焊metal-arc gas-shielded welding 气保护金属极电弧焊metal-arc gas-shielded welding (MAGSW)金属极气保护焊metal-arc welding 金属极电弧焊micro resistance welding 显微电阻焊micro-gap welding 微间隙焊接micro-plasma arc welding 微束等离子弧焊micro-welding 微型焊接；显微焊接microgap welding 微隙间隙焊Miebach high efficiency flash welding machine 米巴赫高效焊机mild steel arc welding electrode 低碳钢焊条mild steel welding rod 低碳钢焊丝miter welding 斜接头焊接mixed gas arc welding 混合气体保护电弧焊molten bath arc welding 熔池电弧焊molten-bath arc welding 熔池焊motor driven welding machine 电动焊机；电动机拖动式焊机motor-driven welding machine 电动旋转式焊机motor-generator welding unit 电动直流发电焊接设备multi-head automatic arc-welding machine 多头自动电弧焊机multi-head automatic welding machine 多头自动焊机multi-operator welding set 多站电焊机multi-pass (multiple pass) welding 多道焊multiarc welding 多弧焊d welding 平焊d welding in the inclined position 下坡焊d welding in the vertical position向下立焊c welding 双弧焊am welding 端面接头滚焊lding 边缘焊接e welding 沿边焊接c and pressure welding 电压力焊接c arc spot welding 电弧点焊c arc welding generators 电弧焊接发电机c arc welding machine 电弧焊机c butt welding 电阻接触焊c resistance welding 电阻焊接；热电阻焊c slag welding 电渣焊c spot welding 电点焊c welding 电焊c welding cast copper solder 铸铜电焊条c welding equipment 电焊设备c welding generator 电焊发电机c welding hammer 电焊锤c welding machine 电焊机c welding plant 电焊厂c welding pliers 电焊钳c welding rod 电焊条multihead automatic arc welding machine 多弧自动电焊机multilayer welding 多层焊multioperator welding generator 多工位焊接发电机multioperator welding machine 多站电焊机；多站焊机multioperator welding set 多站焊机multipass welding 多道焊接multiple arc welding 多弧焊multiple operator arc welding machine 复式弧焊机multiple projection welding 多点凸焊multiple resistance welding 多点电阻焊接；复式电阻焊multiple spot welding 多点点焊multiple spot welding machine 多点点焊机multiple-arc welding plant 多弧焊接机multiple-electrode spot welding machine 多极点焊机multiple-electrode welding 多焊条焊接multiple-impulse welding 多脉冲焊；多脉冲接触焊multiple-operator welding-unit 多重操作焊接单元multiple-spot welding 多点焊multiple-wire multiple-power submerged-arc welding 多丝埋multiple-wire submerged arc welding 多丝埋弧焊multiplewire submerged-arc welding 多丝埋弧焊nail head type welding 钉头式焊接narrow gap one side welding 窄间隙单面焊narrow gap one-side automatic welding 窄间隙单面自动电弧c welding strip 电焊片c-arc welding 电弧焊c-resistance seam-welding 电阻缝焊c-resistance seam-welding machine 电阻缝焊机cal arc welding 电弧焊接cal resistance welding tube 电阻焊接管cally heated welding torch 电热焊枪-beam welding 电子束焊接-gas (enclosed) welding 气电立焊-slag welding 电磁渣焊；电渣焊-slag welding with plate electrode 板极电渣焊-welding 电焊de for arc welding 电焊条；电弧焊条de for vertical down welding 向下立焊条de of vertical down welding 立向下焊条de welding 电弧焊gas welding 气电焊；电气焊magnetic percussive welding 电磁冲击焊magnetic stored energy welding 电磁储能焊n beam welding 电子束焊；电子束焊接n beam welding machine 电子束焊接机n-beam welding 电子束焊接n-beam welding machine 电子束焊机n-bombardment welding 真空电子束焊narrow gap welding 窄间隙焊接；狭间隙焊negative polarity welding 反极性焊接neli-arc welding 氦电弧焊nickel bare welding filter metal 镍焊丝nickel covered welding eleetrode 镍药皮焊条nickel steel gas welding rod 镍钢气焊条nickel-base alloy bare welding filler metal 镍基合金焊丝nitrogen-arc welding 氮弧焊no-gas welding 非气焊non gas shielded arc welding 无气体保护电弧焊non shielded arc welding 无保护电弧焊non-pressure welding 不加压焊接non-vacuum electron beam welding 大气压电子束焊接non-welding character 不可焊接性nonpressure thermit welding (NTW)热剂铸焊oblique fillet welding 斜角焊接缝one head automatic arc welding machine 单弧自动电焊机one side welding 单面焊one-body welding machine 同体式焊机one-body welding set 同体式焊机；单机体电焊机组one-pass welding 单道焊open arc welding 明弧焊open butt gas pressure welding 开式加压气焊orbit welding 环形轨道自动焊接ns leaves welding 电子束焊接percussive welding 电冲击焊；冲击焊；储能焊slag welding 电渣焊；电阻焊slag welding machine 电渣焊机slag welding with consumable nozzle 熔嘴电渣焊slag welding with wire electrode 丝极电渣焊static (percussive) welding 电能储能焊接static percussing welding 静电焊；静电焊；冲击焊；储能焊static percussive welding 静电冲击焊；静电冲击焊d welding 强制成形焊接storage welding 贮能焊；储能焊；脉冲焊接g welding 装配焊接n welding 安装焊接c welding 低温焊mic welding 铝热焊ng or welding of tube with tubesheet 管子与管板的胀接或ve welding (EW)爆炸焊welding 孔焊；小孔熔焊welding 快速焊接te of welding wire 焊丝送进速度f welding temperature 焊接温度场elding 现场焊接；工地焊接arc welding 菲拉电弧焊距out-of-position welding 焊位不当overhead position welding 仰焊overhead welding 仰焊overlay welding 堆焊overlaying welding 堆焊oxy welding 乙炔焊接oxyacetylene welding 氧炔焊oxyacetylene welding outfit 氧乙炔气焊机oxygen welding 氧焊；氧气焊接oxyhydrogen welding 氢氧焊；氢氧焰焊接pad welding 垫块焊接peg welding 栓柱焊接penetration fusion welding 深熔焊接percussion welding 冲击焊；冲击焊法；储能焊；贮能焊；锻接percussion welding (PEW)冲击电阻焊接percussion welding machine 冲击焊机performances of test piece for welding 焊接试板性能pile-up welding 堆焊pincer spot welding head 杠杆式点焊钳pinpoint welding 点焊pipe welding machine 焊管机pipe-welding machine 钢管焊接机plasma arc welding 等离子弧焊接plasma arc welding (PAW)等离子弧焊welding (填角焊)贴角焊welding in the downhand position 船形角焊welding in the flat position 船形焊welding in the horizontal position 横角焊welding in the vertical position 立角焊lding 精密焊接re welding 细丝焊acker welding 躺焊lding 锻焊；锻接elding machine 固定式焊机osition welding 定位焊接elding 熔气焊elding 喇叭形坡口焊接utt welding 闪光对焊；闪光对接焊elding 闪光电弧焊；闪光焊；闪焊；火花电弧焊；火花对焊utt welding 电阻闪光焊接er welding 闪光焊sition welding 平焊；顶面平卧焊sition welding of fillet weld 角焊缝平焊；船形角焊lding 平卧焊e welding rod 软焊条e wire for electric welding 电焊软线lding 流注焊接；浇焊elding 流焊plasma argon arc welding machine 等离子氩弧焊接机plasma MIG welding 等离子熔化极气体保护焊plasma welding 等离子焊plasma welding torch 等离子焊炬plasma-arc welding 等离子电弧焊接plastic welding 塑焊；塑态焊接；塑性焊接plate-work and welding section 铆焊工段pliers spot welding head点焊钳；钳式点焊头plug welding 塞焊point welding machine 点焊机poke welding 手点焊；手动焊钳点焊；手推点焊；钳点焊；压焊portable arc welding machine 便携式弧焊机position of welding 焊接位置；焊位position welding 定位焊precautions before welding 焊接前的预防措施precision laser welding machine 精密激光焊接机precision welding 精密焊接precision welding machine 精密焊机prefabricated welding mo(u)ld 预制焊模preheated electric arc welding 预热电弧焊接preparation of base metal for welding 焊接基体金属的处理preparation of plates for welding 焊接板材的准备press cold welding 冷压焊；加压冷焊press welding 压焊；加压焊red welding 包芯焊条焊接el type friction welding 贮能摩擦焊；储能摩擦焊l friction welding 惯性摩擦焊d welding 向前焊；向左焊；左焊法；左向焊；正手焊elding 锻焊；锻接焊welding 正手焊；左焊法；左向焊；前进焊；前倾焊；向前焊n welding 摩擦焊；摩擦焊接n welding machine 摩擦焊接机fillet welding 正面角焊tomatic welding 全自动焊tomatic arc welding 全自动电弧焊llet welding 满角焊sion thermit welding 热剂铸焊sion welding 全熔合焊ngth welding 满焊pressure welding 熔化压接thermit welding 热剂熔焊；熔化铝热焊type plasma arc welding 熔透型等离子弧焊type welding 熔透型焊接法welding 熔焊接welding metal 熔焊金属bon-arc welding 气保护碳弧焊ctric welding 气电联合焊接al arc welding 气体保护金属极电弧焊pressure contact welding 压力接触焊pressure thermit welding 加压铝热剂焊接；加压热剂焊；加压pressure thermit welding PTW加压热剂焊pressure welding 压接；压力焊接；加压焊接program welding 程序点焊progressive induction seam welding 连续感应滚焊progressive welding 前进焊；分段焊接projection welding 凸出焊接；凸焊puddle welding 堆焊pulsation spot welding 脉冲点焊pulsation welding 脉冲焊；脉动焊接；多脉冲接触焊pulsation welding timer 脉冲焊接计时器pulse arc welding 脉冲电弧焊；脉冲电弧焊接pulse laser welding 脉冲激光焊接pulse welding interrupter 脉冲焊接断续器pulsed arc welding rectifier 脉冲弧焊整流器pulsed arc-welding power source 脉冲弧焊电源pulsed argon arc welding 脉冲氩弧焊pulsed GTA welding 脉冲钨极气体保护焊pulsed metal argon-arc-welding 熔化极脉冲氩弧焊pulsed plasma arc welding 脉冲等离子弧焊pulsed spot welding 脉冲点焊pulsed tungsten argon arc welding 钨极脉冲氩弧焊pulsed tungsten inert gas arc welding 脉冲钨极惰性气体保al-arc welding 气保护金属极电弧焊eld welding 气体保护弧焊elded arc welding 气体保护电弧焊；气体保护焊elded arc welding machine 气保护弧焊机elded arc-welding machine 气体保护弧焊机elded magnetic flux arc welding 磁性焊剂气体保护电弧焊elded metal-arc welding 气体保护金属弧焊网 ）焊pulsed-spray arc welding 脉冲射流电弧焊pure aluminium gas welding rod 纯铝气焊条pure nickel welding electrode 纯镍电焊条push welding 手点焊；手压点焊；钳点焊；压焊qualification of welding procedure 焊接工艺评定qualification welding operator 合格自动焊工quasi-arc welding 潜弧自动焊（焊接网 www.Hanji。
焊接专业术语中英对照
焊接专业术语中英对照焊接欠缺与检验焊接欠缺welding imperfection焊接缺陷weld defect气孔blowhole/ gas pore针尖状气孔pinhole密集气孔porosity条虫状气孔wormhole裂纹crack表面裂纹surface crack咬边undercut焊瘤overlap凹坑pit烧穿burn through塌陷excessive penetration未焊透incomplete penetration/ lack of penetration未熔合lack of fusion/ incomplete fusion 未焊满incompletely filled weld根部凹陷root concavity电弧擦伤arc scratch夹渣slag inclusion夹杂物inclusion夹钨tungsten inclusion白点fish eye/ flake错边misalignment/ dislocation焊接检验试件test piece试样test specimen无损检验nondestructive test破坏检验destructive test外观检查visual examination超声波探伤ultrasonic inspection直射法超声波探伤straight beam method斜射法超声波探伤angle beam method液浸法超声波探伤immersion method射线探伤radiographic inspection/ radiographyX射线探伤X-ray radiographic inspection γ射线探伤gamma-ray inspectionX射线工业电视探伤X-ray industrial television inspection磁粉探伤magnetic particle inspection电磁探伤electromagnetic inspection/ eddy current test 探伤灵敏度flaw detection sensitivity渗透探伤penetration inspection荧光探伤flurescent penetrant inspection 着色探伤dye penetrant inspection密封性检验leak test气密性检验air tight test枕形气密检验pillow test耐压检验pressure test水压检验hydraulic test气压检验pneumatic test液晶检验liquid crystal test声发射检测acoustic emission testing面弯试验face bend testing背弯试验root bend test侧弯试验side bend test横弯试验horizontal bend test纵弯试验axial bend test压扁试验squeezing testactual weld-throat thick-ness焊缝厚度all-around weld整周焊缝all-around weld (整周焊缝)环焊缝angle butt weld斜对接焊angle weld角焊appearance of weld焊缝成形arc-seam weld电弧缝焊arc-spot weld电弧点焊arc-weld电弧焊aspect ratio of weld焊缝成形系数at weld edge在焊缝边上attachment weld连接焊缝automatic spot weld自动点焊法automatic weld自动焊接axis of a weld焊缝行南? 焊接轴线axis of weld焊缝轴线; 焊接轴线back of weld焊缝背面backing groove of weld焊缝反面坡口backing weld底焊; 底焊焊缝bare metal arc weld裸焊条电弧焊bead weld珠焊; 堆焊bead-on-plate weld堆焊焊缝beading weld凸焊beam-to-beam weld梁间焊接; 梁式引线焊接block sequence weld分段多层焊bond weld钢轨接头焊接bridge seam weld桥缝焊接; 桥线焊brize weld硬焊页脚.butt weld对接焊缝butt weld ends对头焊接端butt-weld碰焊; 平式焊接; 对头焊接butt-weld in the downhand position对接平焊butt-weld joint对头焊接butt-weld pipe mill对焊管轧机button spot weld按电钮点焊cap weld最后焊层; 盖面焊缝carbon content of weld materials焊接材料的碳含量cast-weld construction铸焊结构caulk weld填缝焊caulking weld密实焊缝chain intermittent fillet weld链式分段角焊; 并列间断角焊缝chain intermittent weld并列焊接circular weld环形焊缝circumferential weld环缝; 环焊缝cleft weld裂口焊closed weld底边无缝焊; 无间隙焊缝closed-chamber fusion weld闭室熔焊cluster weld丛聚焊缝coil weld卷板对接焊; 卷板对接焊; 板卷焊cold weld冷压接commutator-controlled weld换向控制焊接complete penetration butt weld贯穿对焊composite weld紧密焊缝; 强度密封焊缝concave filled weld凹形角焊缝concave filler weld凹角焊concave fillet weld凹面填角焊concave weld凹焊缝; 凹面焊; 凹形焊缝; 轻型焊connective weld联系焊缝continuous butt-weld mill连续式炉焊管机组continuous fillet weld连续(填)角焊缝; 连续角焊缝; 连续贴角焊continuous weld连续焊缝continuous weld process连续式炉焊管法contour weld特形焊接convex fillet weld凸角焊缝; 凸形角焊缝convex weld凸焊缝; 凸形焊缝copper weld wire包铜钢丝corner flange weld单卷边角焊缝corner weld角焊corner-flange weld卷边角焊缝; 卷边角焊缝crack of weld焊部裂纹cross weld十字交叉焊缝; 横向焊缝cross-wire weld十字焊crotch weld楔接锻接; 楔接焊接cup weld带盖板焊缝depth of weld焊接深度dissimilar weld metal不同的焊接金属; 不同金属的焊接distance between the toes of a weld焊缝宽度double groove weld双面坡口焊缝double-bevel groove weld双斜边坡口焊缝; 双斜坡口焊double-flanged butt weld双弯边对接焊缝double-V groove weld双斜边坡口焊缝; 双斜坡口焊downhand weld平焊缝duplex spot weld双点点焊接头edge joint weld边缘焊edge weld端接焊; 端接焊缝; 端面焊缝; 对边焊electric resistance weld mill电阻焊管机electric weld-pipe mill电焊管机焊接专业英语词汇（通用部分）acetylene 乙炔 ampere 电流安培angle welding 角焊 arc 电弧argon arc welding 氩弧焊接 bare electrode 光熔接条butt welding 对接焊接 camber 电弧弯曲cascade 阶叠熔接法 clad weld 被覆熔接crator 焊疤 excess metal 多余金属filler rod 焊条 fillet weld 填角焊接gas shield 气体遮蔽 groove welding 起槽熔接hand face shield 手握面罩 hard facing 硬表面堆焊jig welding 工模焊接 laser beam welding 雷射光焊接metal electrode insert gas welding MIG熔接nugget 点焊熔核overlaying 堆焊 peening of welding 珠击熔接法plug welding 塞孔熔接 positioned welding 正向熔接pressure welding 压焊 propane gas cutting 丙烷气切割页脚.pure nickel electrode 纯镍熔接条reinforcement of weld 加强焊接resist 抗蚀护膜 root running 背面熔接seam 焊缝 seaming 接合seam welding 流缝熔接 series seam welding 串联缝熔接skip welding process 跳焊法 spark 火花spot welding 点焊接 stitch welding 针角焊接stud arc welding 电弧焊接 under laying 下部焊层void 焊接空隙 weld flow mark 焊接流痕weld flush 焊缝凸起 weld line 焊接纹weld mark 焊接痕 weld penetration 熔接透入weld zone 焊接区 welding 焊接welding bead 焊接泡 welding direction 焊接方向welding distortion 焊接变形 welding flux 焊剂welding ground 电熔接地 welding interval 焊接周期welding stress 熔接应变 welding torch 熔接气炬welding electrode production line 电焊条生产线welding electrode 焊条welding fixture 焊接夹具welding generator 电焊机welding goggles 焊工护目镜welding gun 焊枪welding helmet 电焊帽welding inspection ruler 焊接检验尺welding machine 焊接机welding mill 焊管机welding motor generator 电动焊接发电机welding nozzle 焊嘴welding paste 焊接药膏welding pipe 焊接管welding powder 焊粉welding rectifier 焊接整流器welding robot 焊接机器人welding rod extrusion press 焊条挤压机welding rod with acidic coating 酸性焊条welding rod with alkaline coating 碱性焊条welding rod 焊条welding simulator 焊接模拟器welding stainless electrode 不锈电焊条welding steel tube 焊接钢管welding tin billet 焊锡棒料welding tongs 焊接夹钳welding torch 焊炬welding transformer 电焊变压器welding unit 焊机welding wire machine 焊线机welding wire 焊丝welding-cutting hose 熔焊及切割胶管welding-cutting tool 焊割具welding-rod core 焊条芯welding-seam cleaner 焊缝清理机weldless pipe 无缝管weldless steel tube 无缝钢管well borer 凿井机well counter 井式计数器well deck vessel 井形甲板船well drill 钻井机well platform 钻井平台well rig 钻井机well testing truck 试井车well thermometer 井温计well tube filter 井管滤管well type tempering electric furnace 井式回火电炉well winch 矿井绞车well-logging probe 测井探头well-type counter 井型计数器Wella Balsam Conditioner 威娜宝护发素Wella Balsam shampoo 威娜宝香波Wellene 韦纶聚酯短纤维wellhead acid preventer 井口防酸器wellington 惠灵顿防雨呢Wellingtons 长筒皮靴Welltite 韦纶泰特聚丙烯和聚乙烯单丝Welsbach's alloy 韦尔斯巴赫发火合金Welsh flannel 威尔士法兰绒Welsh wool 威尔士粗羊毛welsh-onion stalk 葱白welsh-onion 葱welt cementing machine 贴边粘合机welt coloring machine 贴边染色机welt cutting machine 切沿条机welt fitting machine 贴边机welt footwear 加贴边的鞋页脚.welter screen 翻滚筛welter 镶边机Wepsin 三唑磷胺Werlisa 威里沙牌照相机Werner 维尔纳牌手表weskit 紧身背心Wessel silver 韦塞尔铜镍锌合金West cigarette 威狮牌香烟West ginseng 西洋参West Lake Dragon Well tea 西湖龙井茶West Lake silk umbrella 西湖绸伞West Lake silk 西湖丝绸West Lake water shield 西湖莼菜Westeeco 韦斯蒂科镍铬铁耐热合金Western king prawn 宽沟对虾Western saddle pants 西式马裤Western sand cherry 沙樱桃Western shirt 西式衬衫western style bed sheet 西式床单Western style hat 西式呢帽Western style pajamas 西式睡衣裤Western style pants 西裤Western style shirt 西式衬衫Western style shirt-waist blouse 西式衬衫上衣Western style suit 西服western tie 西式领带Western wool 美国西部羊毛Western-made shirt in plaid gingham 长方格贞咸布西式衬衫Westinghouse alloy 西屋镍铜热磁补偿合金wet spinning frame 湿纺细纱机wet air compressor 湿空气压缩机wet air pump 湿空气泵wet and dry bulb hygrometer 干湿球湿度计wet and dry bulb recording hygrometer 干湿球自记湿度计wet and dry bulb thermometer 干湿球温度计wet ball mill 湿式球磨机wet blue goat leather 山羊蓝湿革wet blue goat skin 蓝湿山羊皮wet board machine 湿式纸板机wet brush 湿刷wet chrome goat skin 铬湿山羊皮wet cleaner 湿法清洗器wet cloth 湿光布wet clutch 湿式离合器wet collector 湿式除尘器wet condenser 湿式冷凝器wet crude 含水原油wet crushing mill 湿粉碎机wet cylinder liner 湿式气缸套wet drill 湿式风钻wet dust collector 湿式收尘器wet dust separator 湿式除尘器wet electro-magnet 湿式电磁铁wet electrolytic capacitor 电解液电容器wet feeder 湿式给料机wet fiber filter 湿式纤维过滤器wet filter 湿式过滤器wet fourdrinier board machine 长网湿抄机wet frame 湿纺机wet furfural condenser 含水糖醛冷凝器wet gas meter 湿式气量计wet gas scrubber 湿法气体洗涤质量合格证书certification of fitness原材料rawmaterial底板 bottom plate垫层 cushion侧壁 sidewall中心线center line条形基础 strip footing附件 accessories型钢 profile steel钢板 steel plate熔渣 slag飞溅 welding spatter定位焊 tacking引弧 generating of arc熄弧 quenching of arc焊道 welding bead坡口 beveled edges外观检查 visual inspection重皮 doubleskin水平方向弧度 radian in horizontal direction 成型 molding直线度 straightness accuracy焊缝角变形 welding line angular distortion 水平度 levelness铅垂度 verticality翘曲变形 buckling deformation角尺 angle square页脚.对接焊缝 butt weld母材 parent metal法兰密封面 flange sealing surface夹层interlayer表面锈蚀浓度 surface corrosion concentration挠曲变 bending deformation超声波探伤 ultrasonic testing/ ultrasonic examination压力容器 pressure vessel预制下料prefabrication baiting排版直径 set-type diameter焊缝 welding line中幅板 ? center plate测量方法 measuring method基准点 datum mark跳焊 skip welding允许偏差 allowable variation补强板 stiffening plate开孔 tapping对接接头 banjo fixing butt jointing角钢 angle iron安装基准圆 installation fundamental circle 吊装立柱 hoisting upright column焊接钢管 welded steel pipe向心斜拉筋 centripetal canting pull rope 带板 band plate槽钢胀圈 channel steel expansion ring环口 collar extension局部变形 local distortion环缝 circumferential weld顶板 top plate拱顶 vault顶板加强肋 stiffening rib对接 butt joint胎具 clamping fixture卷板机 plate bending rolls中心支架 center bearing bracket椭圆度 ovality等分线 bisectrix搭接宽度lap width点焊spot welding搭接焊 overlap welding对称：symmetrically螺旋爬梯cockle stairs放料阀baiting valve 液位计 content gauge充水试验 filling water test错边量 unfitness of butt joint底圈 foundation ring真空度检漏 vacuum degree leak test丁字焊缝 tee welding渗透探伤 oil whiting test充水试验 filling water test侧角焊缝接头 interior angle welding line jointfoundation settlement 基础沉降测量基准点 datum mark?稳定性试验 stability test排气阀 outlet valve角钢 angle steel构件 component part机械损伤 mechanical damage缩孔 shrinkage cavityenfoldment 折迭碳钢管 carbon steel tube公称直径 nominal diameter预埋件 embedded part轴测图 axonometric drawing布置图arrangement diagram氧乙炔气割 oxyacetylene gas cutting低合金钢管low alloy steel热影响区 heat affected area修磨polish砂轮片grinding wheel等离子plasma panel重皮 coldlap凹凸unevenness缩口necking down端面 head face倾斜偏差 dip deviation外径 external diameter砂轮grinding wheel管件 pipe casting单线图single line drawing平齐parallel and level两端 two terminals满扣 buckle螺栓紧固 bolton周边 periphery附加应力 additional stress页脚.同轴度 axiality平行度 parallelism随机 stochastic允许偏差 allowable variation重直度verticality水平度 levelness隔离盲板 blind plate氩弧焊argon arc welding压盖螺栓 gland bolt间距spacing有效期 period of validity担任 take charge of ;undertake焊条 welding rod碳钢焊条carbon steel焊丝 welding wire熔化焊 melting钢丝 steel wire气体保护焊 gas shielded arc welding 烘干drying清洗ablution制度system焊接工艺welding procedure相应corresponding手工电弧焊manual electric arc welding 手工钨极 manual tungsten electrode打底render电源power source交流alternating current焊件 weldment管壁厚度 pipe thickness对接焊缝 butt weld工件壁厚 workpiece飞溅物 splash沾污 smirch油污 oil stain细锉 smooth file铣刀 milling cutter氧化膜 oxide film脱脂处理 ungrease treatment]棉质纤维 cotton fibre丙酮acetone硫 sulfur焊剂 welding flux钢板 steel plate纵向焊缝 l0ngitudinal weld l0ngitudinal seam筒节 shell ring 封头 end socket卷管 reelpipe强度试验strength test起弧arc starting穿堂风draught熔合fusion反面reverse side整体integral封堵block up焊口 weld bond医用胶布medical proof fabric高频 high frequency焊炬welding torch送气air supply焊接专业英语词汇（熔化焊）熔接fusion welding压接pressure welding焊接过程welding process焊接技术welding technique焊接工艺welding technology/procedure焊接操作welding operation焊接顺序welding sequence焊接方向direction of welding焊接位置welding position熔敷顺序build-up sequencedeposition sequence焊缝倾角weld slope/inclination of weld axis 焊缝转角weld rotation/angle of rotation平焊位置flat position of welding横焊位置horizontal position of welding立焊位置vertical position of welding仰焊位置overhead position of welding平焊downhand welding/flat position welding 横焊horizontal position welding立焊vertical position welding仰焊overhead position welding全位置焊all position welding：熔焊时，焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。
焊接专业英语词汇最全版本
焊接专业英语词汇（共10部分）焊接专业英语词汇（共10部分）1、熔化焊熔接fusion welding压接pressure welding焊接过程welding process焊接技术welding technique焊接工艺welding technology/procedure焊接操作welding operation焊接顺序welding sequence焊接方向direction of welding焊接位置welding position熔敷顺序build-up sequence/deposition sequence焊缝倾角weld slope/inclination of weld axis焊缝转角weld rotation/angle of rotation平焊位置flat position of welding横焊位置horizontal position of welding立焊位置vertical position of welding仰焊位置overhead position of welding平焊downhand welding/flat position welding横焊horizontal position welding立焊vertical position welding仰焊overhead position welding全位置焊all position welding：熔焊时，焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。
如水平固定管所进行的环缝焊接向下立焊vertical down welding/downward welding in the vertical position向上立焊vertical up welding/upward welding in the vertical position倾斜焊inclined position welding上坡焊upward welding in the inclined position下坡焊downward welding in the inclined position对接焊butt welding角焊fillet welding搭接焊lap welding船形焊fillet welding in the downhand position/fillet welding in the flat position平角焊horizontal fillet welding立角焊fillet welding in the vertical position仰角焊fillet welding in the overhead position坡口焊groove weldingI形坡口对接焊square butt welding喇叭形坡口焊flare groove welding卷边焊flanged edge welding纵缝焊接welding of longitudinal seam横缝焊接welding of transverse seam环缝焊接girth welding/ circumferential螺旋缝焊接welding of spiral seam/welding of helical seam 环缝对接焊butt welding of circumferential seam定位焊tack welding单面焊welding by one side双面焊welding by both sides单道焊single pass welding/single run welding多道焊multi-pass welding单层焊single layer welding多层焊multi-layer welding分段多层焊block sequence/ block welding分层多道焊multi-layer and multi-pass welding连续焊continuous welding断续焊intermittent welding打底焊backing weld封底焊back sealing weld盖面焊cosmetic welding深熔焊deep penetration welding摆动焊welding with weaving/weave bead welding前倾焊foreward welding (英国)/ forehand welding (美国) 后倾焊backward welding(英国)/ backhand welding(美国) 分段退焊backstep welding跳焊skip welding对称焊balanced welding/ balanced welding sequence左焊法leftward welding forehand welding右焊法rightward welding/backhand welding挑弧焊whipping method自动焊automatic welding手工焊manual welding/hand welding车间焊接shop welding工地焊接site welding(英国)/ field welding (美国)拘束焊接restraint welding堆焊surfacing/building up/overlaying隔离层堆焊buttering端部周边焊boxing/end return返修焊rewelding补焊repair welding塞焊plug welding槽焊slot welding衬垫焊welding with backing焊剂垫焊welding with flux backing窄间隙焊narrow-gap welding强制成形焊enclosed welding脉冲电弧焊pulsed are welding电弧点焊arc spot welding螺柱焊stud welding热风焊hot gas welding高能焊high grade energy welding固态焊接solid-state welding单面焊双面成形one-side welding with back formation 焊接条件welding condition焊接工艺参数welding parameter极性polarity正接electrode negative/straight polarity反接electrode positive/reversed polarity运条方式manipulation of electrode焊接电流welding current焊接电流增加时间welding current upslope time焊接电流衰减时间welding current downslope time电流密度current density短路电流short circuit current脉冲电流pulse level/pulse current level脉冲电流幅值pulse current amplitude基值电流background level脉冲频率pulse frequency脉冲焊接电流占空比duty cycle of pulse duration电弧电压arc voltage再引弧电压reignition voltage焊接速度welding speed行走速度rate of travel/travel speed送丝速度wire feed rate线能量heat input/energy input热输入heat input预热preheat后热postheat焊后热处理posweld heat treatment/postheat treatment 预热温度preheat temperature层间温度interpass temperature焊接终了温度finishing temperature后热温度postheating temperature焊丝伸出长度wire extension弧长arc length熔化速度melting rate熔化时间melting time熔化系数melting coefficient熔敷速度rate of deposition/deposition rate熔敷系数deposition coefficient熔敷效率deposition efficiency损失系数loss coefficient飞spatter飞溅率spatter loss coefficient融合比fusion ratio稀释dilution稀释率rate of dilution合金过度系数transfer efficiency/recovery (of an element)坡口groove坡口面groove face坡口面角度angle of bevel (英国)/ bevel angle (美国)坡口角度included angle(英国)/groove angle(美国)坡口高度groove depth钝边root face钝边高度thickness of root face/width of root face根部间隙root gap(英国)/root opening (美国)根部半径root radius/groove radius根部锐边root edge卷边高度height of flange卷边半径radius of flange单面坡口single groove双面坡口double groove坡口形式groove typeI形坡口square grooveV形坡口single V grooveY形坡口single V groove with root face双Y形坡口double Vgroove with root face带钝边U形坡口single U groove带钝边双U形坡口double U grooveVY形坡口single compound angle groove带钝边J形坡口single J groove带钝边双J形坡口double J groove单边V形坡口single bevel groove双V形坡口double V groove不对称双V形坡口asymmetric double V groove双单边V形坡口double bevel groove/K groove带垫板V形坡口V groove with backing/ single V groove with backing 喇叭形坡口flare groove锁底坡口single bevel groove with backing locked坡形板边tapered edge焊缝weld接逢seam焊缝符号welding symbol焊缝金属weld metal填充金属filler metal熔敷金属deposited metal焊缝表面weld face/ face of weld焊缝背面back of weld焊缝轴线axis of weld焊缝尺寸size of weld焊缝宽度weld width/ width of weld焊缝长度weld length/ length of weld焊缝有效长度effective length of weld焊缝厚度throat depth/ throat thickness焊缝计算厚度theoretical throat焊缝实际厚度actual throat熔深penetration/ depth of penetration焊缝成形appearance of weld焊缝成形系数form factor of weld余高reinforcement/ excess weld metal背面余高root reinforcement削平焊缝flush weld/ weld machined flush对接焊缝butt weld角焊缝fillet焊脚leg/ fillet weld leg角焊缝断面形状profile of fillet weld平形角焊缝flat fillet凸形角焊缝convex fillet weld凹形角焊缝concave fillet weld角焊缝凹度concavity侧面角焊缝side fillet weld/ fillet weld in parallel shear 正面角焊缝front fillet weld/ fillet weld in normal shear 立角焊缝fillet weld in the vertical position横角焊缝fillet weld in the horizontal position平角焊缝fillet weld in the flat position斜角焊缝oblique fillet weld连续焊缝continuous weld断续焊缝intermittent weld连续角焊缝continuous fillet weld断续角焊缝intermittent fillet weld交错断续角焊缝staggered intermittent fillet weld并列断续角焊缝chain intermittent fillet weld端接焊缝edge weld卷边焊缝flanged edge weld塞焊焊缝plug weld纵向焊缝longitudinal weld横向焊缝transverse weld环行焊缝girth weld/ circumferential weld螺旋形焊缝spiral weld/ helical weld密封焊缝seal weld承载焊缝strength weld联系焊缝connective weld定位焊缝tack weld焊道bead/ run/ pass焊波ripple焊根weld root/ root of weld焊趾weld toe/ toe封底焊道sealing run (after making main weld)/ back weld打底焊道backing weld (before making main weld)/ back weld 根部焊道root pass/ root run填充焊道filling bead盖面焊道cosmetic bead/ cover pass回火焊道temper bead/ annealing bead熔透焊道penetration bead焊层layer焊接接头welded joint接头形状joint geometry等强匹配接头equalmatching weld joint低强匹配接头undermatching weld joint超强匹配接头overmatching weld joint接头根部root of joint对接接头butt jointI形对接接头square butt jointV形对接接头single V butt jointU形对接接头single U butt jointJ形坡口接头single J butt joint双V形对接接头double V butt joint双单边V形对接接头double bevel butt joint/ K groove butt joint 带钝边U形对接接头double U butt joint带钝边J形坡口接头double J joint角接接头corner jointT形接头T joint斜T形接头inclined T joint十字接头cruciform joint/ cross-shaped joint三联接头joint among three members搭接接头lap joint套管接头muff joint/ sleeve joint双盖板接头double strapped joint盖板接头strapped joint端接接头edge joint卷边接头flanged edge joint锁底对接接头lock butt joint斜对接接头oblique butt joint混合接头mixed joint/ composite joint有间隙接头open joint无间隙接头closed joint焊接电弧welding arc电弧形态arc shape电弧物理行为arc physics behaviour引弧striking arc引弧电压striking voltage电弧气氛arc atmosphere阴极cathode热阴极hot cathode冷阴极cold cathode阴极斑点cathode spot阴极区cathode region阴极区电场强度intensity of the electric field in the cathode region 阴极压降cathode drop阳极anode阳极斑点anode spot斑点压力spot pressure阳极区anode region阳极区电场强度intensity of the electric field in the anode region 阳极压降anode drop弧柱arc column/ arc stream弧柱压降voltage drop in arc column弧柱电位梯度potential gradient in the arc column弧焰arc flame弧心arc core硬电弧forceful arc/ hard arc软电弧soft arc旋转电弧rotating arc脉冲电弧pulsed arc脉冲喷射电弧pulsed spray arc起皱现象puckering phenomena起皱电弧puckering arc起皱临界电流puckering critical current间接电弧indirect arc压缩电弧compressive arc磁控电弧magnetic controlling arc电弧力arc force电磁力electromagnectic force电磁收缩效应pinch effect电弧飘移wandering of arc电弧稳定性arc stability电弧静特性static characteristic of arc电弧动特性dynamic characteristic of arc最小电压原理principle of minimum voltage 电弧挺度arc stiffness电弧偏吹arc blow磁偏吹magnetic blow阴极清理作用cleaning action of the cathode 电弧自身调节arc self-regulation挖掘作用digging action极性效应polarity effect熔滴droplet熔滴比表面积specific surface of droplet熔滴过渡metal transfer过度频率transition frequency粗滴过渡globular transfer; drop transfer短路过渡short circuiting transfer喷射过渡spray transfer旋转喷射过渡rotating spray transfer脉冲喷射过渡pulsed spray transfer爆炸过渡explosive transfer渣壁过渡flux wall guided transfer熔池molten pool沸腾状熔池boiling molten pool弧坑crater熔渣slag渣系slag system渣系相图slag system diagram碱性渣basic slag酸性渣acid slag碱度basicity酸度acidity长渣long slag短渣short slag粘性熔渣viscous slag氧化物型熔渣oxide melting slag盐型熔渣salt melting slag盐-氧化物型熔渣salt-oxide melting slag熔渣流动性fluidity of the slag; slag fluidity 熔渣solidified slag多孔焊渣porous slag玻璃状焊渣vitreous slag自动脱落焊渣self-releasing slag脱渣性slag detachability焊接设备welding equipment; welding set焊机welding machine; welder电焊机electric welding machine; electric welder焊接电源welding power source焊接热循环weld thermal cycle焊接温度场field of weld temperature; weld temperature field准稳定温度场quasi-stationary temperature field焊接热源welding heat source点热源point heat source线热源linear heat source面热源plane heat source瞬时集中热源instantaneous concentration heat source热效率thermal efficiency热能集中系数coefficient of heat flow concentration峰值温度peak temperature瞬时冷却速度momentary cooling rate冷却时间cooling time置换氧化substitutionary oxydation扩散氧化diffusible oxydation脱氧desoxydation先期脱氧precedent desoxydation扩散脱氧diffusible desoxydation沉淀脱氧precipitation desoxydation扩散氢diffusible hydrogen初始扩散氢initial diffusible hydrogen100℃残余扩散氢diffusible hydrogen remained at 100℃残余氢residual hydrogen去氢dehydrogenation去氢热处理heat treatment for dehydrogenation脱硫desulphurization脱磷dephosphorization渗合金alloying微量合金化microalloying一次结晶组织primary solidification structure二次结晶组织secondary solidification structure联生结晶epitaxial solidification焊缝结晶形态solidification mode in weld-bead结晶层状线ripple多边化边界polygonization boundary结晶平均线速度mean solidification rate针状铁素体acicular ferrite条状铁素体lath ferrite侧板条铁素体ferrite side-plate晶界欣素体grain boundary ferrite; polygonal ferrite; pro-entectoid ferrite 粒状贝氏体granular bainite板条马氏体lath martensite过热组织overheated structure魏氏组织Widmannst?tten structureM-A组元martensite-austenite constituent焊件失效分析failure analysis of weldments冷裂判据criterion of cold cracking冷裂敏感系数cold cracking susceptibity coefficient 脆性温度区间brittle temperature range氢脆hydrogen embrittlement层状偏析lamellar segregation愈合healing effect断口金相fractography断口fracture延性断口ductile fracture韧窝断口dimple fracture脆性断口brittle fracture解理断口cleavage fracture准解理断口quasi-cleavage fracture氢致准解理断口hydrogen-embrittlement induced沿晶断口intergranular fracture穿晶断口transgranular fracture疲劳断口fatigue fracture滑移面断口glide plane fracture断口形貌fracture apperance断口试验fracture test宏观断口分析macrofractography放射区radical zone纤维区fibrous zone剪切唇区shear lip aone焊接性weldability使用焊接性service weldability工艺焊接性fabrication weldability冶金焊接性metallurgical weldability热焊接性thermal weldability母材base metal; parent metal焊接区weld zone焊态as-welded (AW)母材熔化区fusion zone半熔化区partial melting region未混合区unmixed zone熔合区bond area熔合线weld junction (英)；bond line (美)热影响区heat-affected zone (HAZ)过热区overheated zone粗晶区coarse grained region细晶区fine grained region过渡区transition zone硬化区hardened zone碳当量carbon equivalent铬当量chromium equivalent镍当量nickel equivalent舍夫勒组织图Schaeffler's diagram德龙组织图Delong’s diagram连续冷却转变图（CCT图）continuous cooling transformation 裂纹敏感性cracking sensibility焊接裂纹weld crack焊缝裂纹weld metal crack焊道裂纹bead crack弧坑裂纹crater crack热影响区裂纹heat-affected zone crack纵向裂纹longitudinal crack横向裂纹transverse crack微裂纹micro-crack; micro-fissure热裂纹hot crack凝固裂纹solidification crack晶间裂纹intercrystalline crack穿晶裂纹transcrystalline crack多边化裂纹polygonization crack液化裂纹liquation crack失延裂纹ductility-dip crack冷裂纹cold crack延迟裂纹delayed crack氢致裂纹hydrogen-induced crack焊道下裂纹underbead crack焊根裂纹root crack焊趾裂纹toe crack锯齿形裂纹chevron cracking消除应力处理裂纹stress relief annealing crack (SR crack) 再热裂纹reheat crack焊缝晶间腐蚀weld intercryctalline corrosion刀状腐蚀knife line attack敏化区腐蚀weld decay层状撕裂lamellar tearing焊接性试验weldability裂纹试验cracking testIIW裂纹试验IIW cracking testY形坡口裂纹试验slit type cracking test分块形槽热裂纹试验segmented circular groove cracking test H形裂纹试验H-type cracking test鱼骨形裂纹试验fishbone cracking test指形裂纹试验finger (cracking) testT形裂纹试验Tee type cracking test环形槽裂纹试验circular-groove cracking test可调拘束裂纹试验varestraint testBWRA奥氏体钢裂纹试验BWRA cracking test for austenitie steel圆棒裂纹试验bar type cracking test; round bar cracking test里海裂纹试验Lehigh restraint cracking test圆形镶块裂纹试验circular-path cracking test十字接头裂纹试验cruciform cracking testZ向窗口拘束裂纹试验Z-direction window type restraint cracking test G-BOP焊缝金属裂纹试验G-BOP weld metal crack test巴特尔焊道下裂纹试验Battelle type underbead cracking testU形拉伸试验U-tension test缪雷克期热裂纹试验Murex hot cracking test菲斯柯裂纹试验FISCO (type) cracking testCTS裂纹试验controlled thermal severity拉伸拘束裂纹试验（TRC试验）tensile restraint cracking test刚性拘束裂纹试验（RRC试验）rigid restraint cracking test插销试验implant testTigamajig 薄板焊接裂纹试验Tigamajing thin plate cracking test焊道纵向弯曲试验longitudinal-bead test柯麦雷尔弯曲试验Kommerell bead bend test肯泽尔弯曲试验Kinzel test缺口弯曲试验notch bend test热朔性试验hot-ductility test热影响区冲击试验impact test of HAZ热影响区模拟试验synthetic heat-affected zone test最高硬度试验maximum hardness test落锤试验NRL (Naval Research Laboratory)测氢试验Hydrogen test焊接材料电极焊接材料welding consumables电极electrode熔化电极consumable electrode不熔化电极nonconsumable electrode钨电极tungsten electrode焊丝welding wire. Welding rod实心焊丝solid wire渡铜焊丝copper-plating welding wire自保护焊丝self-shielded welding wire药芯焊丝flux-cored wire复合焊丝combined wire堆焊焊丝surfacing welding rod填充焊丝filler wire焊条electrode/ covered electrode焊芯core wire药皮coating (of an electrode)/ covering (of an electrode)涂料coating flux/coating material造气剂gas forming constituents造渣剂slag forming constituents合金剂alloying constituent脱氧剂dioxidizer稳弧剂arc stabilizer粘接剂binder水玻璃water glass水玻璃模数modules of water glass酸性焊条acid electrode高钛型焊条high titania (type) electrode钛钙型焊条lime titania type electrode钛铁矿形焊条ilmenite type electrode氧化铁型焊条iron oxide type electrode/ high iron oxide type electrode高纤维素型焊条high cellulose (type) electrode石墨型焊条graphite type electrode碱性焊条basic electrode/ lime type covered electrode低氢型焊条low hydrogen type electrode高韧性超低氢焊条high toughness super low hydrogen electrode奥氏体焊条austenitic electrode铁素体焊条ferritic electrode不锈钢焊条stainless steel electrode珠光体耐热钢焊条pearlitic heat resistant steel electrode低温钢焊条low temperature steel electrode/ steel electrode for low temperature 铝合金焊条aluminum alloy arc welding electrode铜合金焊条copper-alloy arc welding electrode铜芯铸铁焊条cast iron electrode with steel core纯镍铸铁焊条pure nickel cast iron electrode球墨铸铁焊条electrode for welding spheroidal graphite cast iron铸芯焊条electrode with cast core wire镍基合金焊条nickel base alloy covered electrode蒙乃尔焊条Monel electrode纯铁焊条pure iron electrode渗铝钢焊条alumetized steel electrode高效率焊条high efficiency electrode铁粉焊条iron powder electrode底层焊条backing welding electrode深熔焊条deep penetration electrode重力焊条gravity electrode立向下焊条electrode for vertical down position welding节能焊条saving energy electrode水下焊条underwater welding electrode耐海水腐蚀焊条seawater corrosion resistant steel electrode低尘低毒焊条low-fume and harmfulless electrode/low-fume and low-toxic electrode堆焊焊条surfacing electrode耐磨堆焊焊条hardfacing electrode钴基合金堆焊焊条cobalt base alloy surfacing electrode碳化钨堆焊焊条tungsten carbide surfacing electrode高锰钢堆焊焊条high manganese steel surfacing electrode双芯焊条twin electrode绞合焊条stranded electrode编织焊条braided electrode双层药皮焊条double coated electrode管状焊条flux-cored electrode气渣联合保护型药皮semi-volatile covering焊条工艺性usability of the electrode/ technicality of the electrode焊条使用性running characteristics of an electrode/ operating characteristics of an ele ctrode焊条熔化性melting characteristics of an electrode焊条直径core diameter焊条偏心度eccentricity (of an electrode)药皮重量系数gravity coefficient of coating焊条药皮含水量percentage of moisture for covering焊条夹吃持端bare terminal (of an electrode)焊条引弧端striking end (of an elcetrode)焊剂welding flux/ flux熔炼焊剂fused flux粘结焊剂bonded flux烧结焊剂sintered flux/ agglomerated flux窄间隙埋弧焊焊剂flux for narrow-gap submerged arc welding低氢型焊剂low hydrogen type flux高速焊剂high speed welding flux无氧焊剂oxygen-free flux低毒焊剂low poison flux磁性焊剂magnetic flux电弧焊arc welding直流电弧焊direct current arc welding交流电弧焊alternating current arc welding三相电弧焊three phase arc welding熔化电弧焊arc welding with consumable金属极电弧焊metal arc welding不熔化极电弧焊arc welding with nonconsumable碳弧焊carbon arc welding明弧焊open arc welding焊条电弧焊shielded metal arc welding (SMAW)重力焊gravity welding躺焊fire cracker welding电弧堆焊arc surfacing自动堆焊automatic surfacing躺板极堆焊surfacing by fire cracker welding带极堆焊surfacing with band-electrode振动电弧堆焊vibratory arc surfacing耐磨堆焊hardfacing埋弧焊submerged arc welding (SAW)多丝埋弧焊multiple wire submerged arc welding纵列多丝埋弧焊Tandem sequence (submerged-arc welding)横列多丝埋弧焊series submerged arc welding (SAW-S)横列双丝并联埋弧焊transverse submerged arc welding热丝埋弧焊hot wire submerged-arc welding窄间隙埋弧焊narrow-gap submerged arc welding弧压反馈电弧焊arc voltage feedback controlling arc welding自调节电弧焊self-adjusting arc welding适应控制焊接adaptive control welding焊剂层burden; flux layer气体保护电弧焊gas shielded arc welding保护气体protective atmosphere惰性气体inert-gas活性气体active-gas惰性气体保护焊inert-gas (arc) welding氩弧焊argon arc welding熔化极惰性气体保护电弧焊metal inert-gas arc welding钨极惰性气体保护电弧焊tungsten inert-gas arc welding钨极氢弧焊argon tungsten arc welding脉冲氢弧焊pulsed argon arc welding熔化极脉冲氢弧焊argon metal pulsed arc welding钨极脉冲氢弧焊argon tungsten pulsed arc welding热丝MIG焊hot wire MIG welding热丝TIG焊hot wire TIG welding氨弧焊helium-arc welding活性气体保护电弧焊metal active-gas arc welding混合气体保护电弧焊mixed gas arc welding二氧化碳气体保护电弧焊carbon-dioxide arc welding; CO2 arc welding 细丝CO2焊CO2 arc welding with thin wire粗丝CO2焊CO2 arc welding with thick wire磁性焊剂CO2焊unionarc welding药芯焊丝CO2焊arcos arc process; dual shield arc welding 气电立焊electrogas (arc) welding氮弧焊nitrogen-arc welding水蒸气保护电弧焊water vapour arc welding原子氢焊atomic hydrogen welding冲器室中电弧焊controlled atmosphere arc welding旋转电弧焊rotating arc welding短路过渡电弧焊short circuiting arc welding焊丝横摆频率weaving speed of wire焊丝停摆时间electrode keep time of slider等离子弧焊plasma arc welding (PAW)等离子弧plasma arc等离子流plasma jet转移弧transferred arc非转移弧nontransferred arc联合型等离子弧combined plasma arc主弧main arc维弧pilot arc维弧电流pilot arc surrent双弧现象double arcing双弧临界电流critical current of double arcing等离子弧焊枪plasma (welding) torch压缩喷嘴constricting nozzle单孔喷嘴single port nozzle多孔喷嘴multiport nozzle压缩喷嘴孔径orifice diameter孔道长度orifice throat length孔道比orifice throat ratio等离子气plasma gas; orifice gas电极内缩长度electrode setback小孔效应keyhole effect小孔型等离子弧焊keyhole-mode welding熔透型等离子弧焊fusion type plasma arc welding大电流等离子弧焊high-current plasma arc welding中电流等离子弧焊intermediate-current plasma arc welding 小电流等离子弧焊low-current plasma arc welding微束等离子弧焊micro-plasma arc welding交流等离子弧焊AC plasma arc welding脉冲等离子弧焊pulsed plasma arc welding等离子弧堆焊plasma arc surfacing热丝等离子弧堆焊hot wire plasma arc surfacing粉末等离子弧堆焊plasma arc powder surfacing等离子-熔化极惰性气体保护电弧焊plasma MIG welding转移弧电源transferred arc power supply非转移弧电源nontransferred arc power supply电弧焊设备arc welding equipment电弧焊机arc welding machine直流弧焊机DC arc welding machine交流弧焊机AC arc welding machine交直流两用弧焊机AC/DC arc welding machine单站弧焊机single operator arc welding machine多站弧焊机multi-operator arc welding set固定式弧焊机stationary arc welding machine移动式弧焊机portable arc welding machine台式弧焊机bench arc welding machine内燃机驱动式弧焊机combustion engine driven arc welding set电动机驱动式弧焊机motor driven arc welding set熔化极弧焊机arc welding machine using a consumable electrode不熔化极弧焊机arc welding machine using a non-consumable electrode脉冲弧焊机pulsed arc welding machine气体保护弧焊机gas shielded arc welding machine氩弧焊机argon arc welding machine二氧化碳弧焊机CO2 arc welding machine钨极惰性气体保护弧焊机tungsten inert-gas welding machine熔化仍惰性气体保护弧焊机metal inert-gas welding machine气电立焊机electrogas (arc) welding machine等离子弧焊机plasma arc welding machine微束等离子弧焊机micro-plasma welding equipment原子氢焊机atomic hydrogen welding apparatus埋弧焊机submerged arc welding machine弧焊电源arc welding power source直流弧焊电源DC arc welding power source交流弧焊电源AC arc welding power source交直流两用弧焊电源AC/DC arc welding power source脉冲弧焊电源pulsed arc welding power source上升特性弧焊电源rising characteristic arc welding power source平特性弧焊电源constant –voltage arc welding power source下降特性弧焊电源dropping characteristic arc welding power source垂降特性弧焊电源constant-current arc welding power source多特性弧焊电源slope-controlled arc welding power source逆变式焊接电源inverter welding power source晶体管弧焊电源transistor arc welding power source电源动特性dynamic characteristic电源外特性external characteristic弧焊变压器arc welding transformer弧焊整流器arc welding rectifier硅弧焊整流器silicon arc welding rectifier晶闸管弧焊整流器SCR arc welding rectifier; arc welding silicon controlled rectifier脉冲弧焊整流器pulsed arc welding rectifier弧焊发电机arc welding generator焊车welding tractor焊接机头welding head行走机构traveller送丝机构wire feeder等速送丝方式constant wire-feed system变速送丝方式alternate wire-feed system跟踪装置tracer焊丝盘wire reel焊钳electrode holder焊枪welding gun电极夹electrode holder导电嘴tip; contact tube喷嘴nozzle焊剂漏斗flux-hopper高频振荡器oscillator; HF unit脉冲引弧器pulsed arc starter; surge injector脉冲稳弧器pulsed arc stabilizer脉冲激弧器pulsed arc exciter输出电抗器out put reactor镇定变阻器ballast rheostat直流分量抑制器direct current suppressor焊接回路welding circuit额定焊接电流rated welding current焊接电流调节范围range of welding current regulation 空载电压open circuit voltage(no load voltage)约定负载电压conventional load voltage负载持续率duty cycle额定负载持续率rated duty cycle; standard service手工弧焊机manual arc welding machine电焊渣electroslag welding (ESW)手工电渣焊manual electroslag welding丝极电渣焊electroslag welding with wire electrode板极电渣焊electroslag welding with plate electrode熔嘴电渣焊electroslag welding with consumable nozzle 管极电渣焊electroslag welding with tube electrode窄间隙电渣焊narrow-gap electroslag welding电渣堆焊electroslag surfacing电渣焊机electrosalg welding machine熔嘴consumable nozzle; consumable wire钢档板steel shoe (钢冷却板Cu-cooling plate铜滑板copper shoe渣池slag bath渣池深度depth of slag bath渣池电压voltage of slag bath电渣过程稳定性electroslag process stability焊丝间距distance between welding wires电子束焊electron beam welding (EBW)脉冲电子束焊pulsed electron beam welding加速电压acceleration voltage/ operating voltage电子束电流beam current电子束功率beam power电子束功率密度beam power density焦点focal spot焦距focal length工作距离work distance电子束焊机electron beam welding machine高真空电子束焊机full vacuum electron beam welder低真空电子束焊机partial vacuum electron beam welder 非真空电子束焊机nonvacuum electron beam welder真空度vacuum电子枪electron gun二极电子枪diode gun三极电子枪triode gun偏压电极bias electrode电磁透镜electromagnetic lens电子束偏转线圈electron beam deflection coils导流系数perveance钉尖spiking激光焊laser welding/ laser beam welding连续激光焊continuous laser welding脉冲激光焊impulsed laser welding激光焊机laser welding equipment气体激光器gas laser固体激光器solid laser焦斑直径focussed diameter of the beam离焦量clearance between focal point and (plate) surface 焊缝深宽比weld seam depth-to-width ratio3、气焊、热剂焊、水下焊gas welding氧乙炔焊oxy-acetylene welding氢氧焊oxy-hydrogen welding空气乙炔焊air-acetylene welding氧乙炔焊oxy-acetylene flame氢氧焰oxy-hydrogen flame氧煤气焰oxy-coal gas flame焊接火焰welding flame混合比mixing ratio混合气体可燃范围inflammable limit of the gaseous 一次燃烧primary combustion二次燃烧secondary combustion燃烧速度combustion rate燃烧强度combustion intensity火焰热效率flame heating efficiency焰芯inner cone; flame cone内焰internal flame外焰flame envelope中性焰neutral flame氧化焰oxidizing flame碳化焰carburizing flame回火flashback逆火backfire回烧flashback气体发生速度gasification speed焊炬torch; blow pipe等压式焊炬balanced pressure torch射吸式焊炬injector torch氧乙炔焊炬oxy-acetylene torch焊割两用炬combined cutting and welding torch混合室mixing chamber喷射器injector焊嘴welding nozzle; welding tip液氧气化器oxygen evaporator气瓶gas cylinder乙炔瓶acetylene cylinder阀罩cylinder cap气瓶阀cylinder valve汇流排cylinder manifold减压器pressure regulator; gas regulator单级减压器single stage regulator两级减压器two stage regulator回火防止器flashback arrestor干式回火防止器dry flashback arrestor水封式回火防止器water-closing type arrestor净化器purifier乙炔发生器acetylene generator低压乙炔发生器low pressure acetylene generator热剂补焊thermit repair welding钢轨热剂焊thermit rail welding热剂thermit powder热剂钢水thermit steel热剂反应thermit reaction热剂溶渣thermit slag热剂铸模thermit mold; mold for thermit weld热剂坩埚thermit crucible焊筋collar水下焊underwater welding水下气体保护电弧焊underwater gas shielded arc welding水下等离子弧焊underwater plasma arc welding温式水下焊wet method underwater welding干式水下焊dry method underwater welding局部干式水下焊local dry underwater welding水帘局部干式水下焊water curtain type dry underwater welding4、压焊（电阻焊摩擦焊爆炸焊扩散焊超声波焊等）电阻焊resistance welding (RW)点焊spot welding; resistance spot welding凸焊projection welding缝焊seam welding滚点焊roll-spot welding连续点焊stitch welding多点焊multiple spot welding手压点焊push welding; poke welding脉冲点焊pulsation spot welding; multiple-impulse welding双面点焊direct spot welding单面点焊indirect spot welding串联点焊series spot welding多点凸焊multiple projection welding频道进缝焊step-by-step seam welding压平缝焊mash seam welding串联缝焊series seam welding对接缝焊butt seam welding; foil-butt seam电阻对焊upset butt welding闪光对焊flash butt welding (FBW)储能焊stored energy welding电容储能点焊condenser discharge spot welding高频电阻焊high frequency resistance welding冲击电阻焊percussion welding胶接点焊spot weld-bonding; weld-bonding闪光flashing; flash过梁bridge; lintel顶锻upsetting; upset夹紧力clamping force顶锻力upsetting force; upset force电极压力electrode force; electrode pressure电极滑移electrode skid焊接循环welding cycle预压时间squeeze time锻压时间forge-delay time; forge time焊接通电时间（电阻焊）welding time (resistance welding) 预热时间preheat time加热时间heat time冷却时间cool time间歇时间quench time; chill time回火时间temper time维持时间hold time休止时间off time闪光时间flash time; flashing time顶锻时间upset time; upsetting time有电顶锻时间upset current time无电顶锻时间upset current-off time闪光速度flashing speed闪光电流flashing current; flash current顶锻电流upset current预热电流preheat current回火电流temper current调伸长度initial overhange; extension闪光留量flash allowance顶锻留量upset allowance顶锻速度upset speed电极接触面electrode contact surface贴合面faying surface焊点welding spot熔核nugget熔核直径diameter of nugget塑性金属环区corona bond焊透率penetration rate压痕indentation。
焊接专业英语词汇
焊接专业英语词汇（焊接及相关工艺英文缩写）AW——ARC WELDING——电弧焊AHW——atomic hydrogen welding——原子氢焊BMAW——bare metal arc welding——无保护金属丝电弧焊CAW——carbon arc welding——碳弧焊CAW-G——gas carbon arc welding——气保护碳弧焊CAW-S——shielded carbon arc welding——有保护碳弧焊CAW-T——twin carbon arc welding——双碳极间电弧焊EGW——electrogas welding——气电立焊FCAW——flux cored arc welding——药芯焊丝电弧焊FCW-G——gas-shielded flux cored arc welding——气保护药芯焊丝电弧焊FCW-S——self-shielded flux cored arc welding——自保护药芯焊丝电弧焊GMAW——gas metal arc welding——熔化极气体保护电弧焊GMAW-P——pulsed arc——熔化极气体保护脉冲电弧焊GMAW-S——short circuiting arc——熔化极气体保护短路过度电弧焊GTAW——gas tungsten arc welding——钨极气体保护电弧焊GTAW-P——pulsed arc——钨极气体保护脉冲电弧焊MIAW——magnetically impelled arc welding——磁推力电弧焊PAW——plasma arc welding——等离子弧焊SMAW——shielded metal arc welding——焊条电弧焊SW——stud arc welding——螺栓电弧焊SAW——submerged arc welding——埋弧焊SAW-S——series——横列双丝埋弧焊RW——RWSISTANCE WELDING——电阻焊FW——flash welding——闪光焊RW-PC——pressure controlled resistance welding——压力控制电阻焊PW——projection welding——凸焊RSEW——resistance seam welding——电阻缝焊RSEW-HF——high-frequency seam welding——高频电阻缝焊RSEW-I——induction seam welding——感应电阻缝焊RSEW-MS——mash seam welding——压平缝焊RSW——resistance spot welding——点焊UW——upset welding——电阻对焊UW-HF——high-frequency——高频电阻对焊UW-I——induction——感应电阻对焊SSW——SOLID STATE WELDING——固态焊CEW——co-extrusion welding——CW——cold welding——冷压焊DFW——diffusion welding——扩散焊SW——stud arc welding——螺栓电弧焊SAW——submerged arc welding——埋弧焊SAW-S——series——横列双丝埋弧焊RW——RWSISTANCE WELDING——电阻焊FW——flash welding——闪光焊RW-PC——pressure controlled resistance welding——压力控制电阻焊PW——projection welding——凸焊RSEW——resistance seam welding——电阻缝焊RSEW-HF——high-frequency seam welding——高频电阻缝焊RSEW-I——induction seam welding——感应电阻缝焊RSEW-MS——mash seam welding——压平缝焊RSW——resistance spot welding——点焊UW——upset welding——电阻对焊UW-HF——high-frequency——高频电阻对焊UW-I——induction——感应电阻对焊SSW——SOLID STATE WELDING——固态焊CEW——co-extrusion welding——CW——cold welding——冷压焊DFW——diffusion welding——扩散焊HIPW——hot isostatic pressure diffusion welding——热等静压扩散焊EXW——explosion welding——爆炸焊FOW——forge welding——锻焊FRW——friction welding——摩擦焊FRW-DD——direct drive friction welding——径向摩擦焊FSW——friction stir welding——搅拌摩擦焊FRW-I——inertia friction welding——惯性摩擦焊HPW——hot pressure welding——热压焊ROW——roll welding——热轧焊USW——ultrasonic welding——超声波焊S——SOLDERING——软钎焊DS——dip soldering——浸沾钎焊FS——furnace soldering——炉中钎焊IS——induction soldering——感应钎焊IRS——infrared soldering——红外钎焊INS——iron soldering——烙铁钎焊RS——resistance soldering——电阻钎焊TS——torch soldering——火焰钎焊UUS——ultrasonic soldering——超声波钎焊WS——wave soldering——波峰钎焊B——BRAZING——软钎焊BB——block brazing——块钎焊DFB——diffusion brazing——扩散焊DB——dip brazing——浸沾钎焊EXB——exothermic brazing——反应钎焊FB——furnace brazing——炉中钎焊IB——induction brazing——感应钎焊IRB——infrared brazing——红外钎焊RB——resistance brazing——电阻钎焊TB——torch brazing——火焰钎焊TCAB——twin carbon arc brazing——双碳弧钎焊OFW——OXYFUEL GAS WELDING——气焊AAW——air-acetylene welding——空气乙炔焊OAW——oxy-acetylene welding——氧乙炔焊OHW——oxy-hydrogen welding——氢氧焊PGW——pressure gas welding——气压焊OTHER WELDING AND JOINING——其他焊接与连接方法AB——adhesive bonding——粘接BW——braze welding——钎接焊ABW——arc braze welding——电弧钎焊CABW——carbon arc braze welding——碳弧钎焊EBBW——electron beam braze welding——电子束钎焊EXBW——exothermic braze welding——热反应钎焊FLB——flow brazing——波峰钎焊FLOW——flow welding——波峰焊LBBW——laser beam braze welding——激光钎焊EBW——electron beam welding——电子束焊EBW-HV——high vacuum——高真空电子束焊EBW-MV——medium vacuum——中真空电子束焊EBW-NV——non vacuum——非真空电子束焊ESW——electroslag welding——电渣焊ESW-CG——consumable guide eletroslag welding——熔嘴电渣焊IW——induction welding——感应焊LBW——laser beam welding——激光焊PEW——percussion welding——冲击电阻焊TW——thermit welding——热剂焊THSP——THERMAL SPRAYING——热喷涂ASP——arc spraying——电弧喷涂FLSP——flame spraying——火焰喷涂FLSP-W——wire flame spraying——丝材火焰喷涂HVOF——high velocity oxyfuel spraying——高速氧燃气喷涂PSP——plasma spraying——等离子喷涂VPSP-W——vacuum plasma spraying——真空等离子喷涂TC——THERMAL CUTTING——热切割OC——OXYGEN CUTTING——气割OC-F——flux cutting——熔剂切割OC-P——metal powder cutting——金属熔剂切割OFC——oxyfuel gas cutting——氧燃气切割CFC-A——oxyacetylene cutting——氧乙炔切割CFC-H——oxyhydrogen cutting——氢氧切割CFC-N——oxynatural gas cutting——氧天然气切割CFC-P——oxypropanne cutting——氧丙酮切割OAC——oxygen arc cutting——氧气电弧切割OG——oxygen gouging——气刨OLC——oxygen lance cutting——氧矛切割AC——ARC CUTTING——电弧切割CAC——carbon arc cutting——碳弧切割CAC-A——air carbon arc cutting——空气碳弧切割GMAC——gas metal arc cutting——熔化极气体保护电弧切割GTAC——gas tungsten arc cutting——钨极气体保护电弧切割PAC——plasma arc cutting——等离子弧切割SMAC——shielded metal arc cutting——焊条电弧切割HIGH ENERGY BEAM CUTTING——高能束切割EBC——electron beam cutting——电子束切割LBC——laser beam cutting——激光切割LBC-A——air——空气激光切割LBC-EV——evaporative——蒸气激光切割LBC-IG——inert gas——惰性气体激光切割LBC-O——oxygen——氧气激光切割激光切割laser cutting(LC);laser beam cutting电子束切割electron beam cutting喷气激光切割gas jet laser cutting碳弧切割carbon arc cutting水下切割underwater cutting喷水式水下电弧切割waterjet method underwater arc cutting氧矛切割oxygen lancing;oxygen lance cutting溶剂氧切割powder lancing手工气割manual oxygen cutting自动气割automatic oxygen cutting仿形切割shape cutting数控切割NC(numerical-control)cutting快速切割high-speed cutting垂直切割square cut叠板切割stack cutting坡口切割beveling;bevel cutting碳弧气割carbon arc air gouging火焰气刨flame gouging火焰表面清理scarfing氧熔剂表面修整powder washing预热火焰preheat flame预热氧preheat oxygen切割氧cutting oxygen/cutting stream切割速度cutting speed切割线line of cut/cut line切割面face of cut/cut face切口kerf切口上缘cutting shoulder切口宽度kerf width后拖量drag切割面平面度evenness of cutting surface/planeness of cutting surface 割纹深度depth of cutting veins/stria depth切割面质量quality of cut face上缘熔化度shoulder meltability/melting degree of shoulder切口角kerf angle缺口notch挂渣adhering slag结瘤dross割炬cutting torch/cutting blowpipe/oxygen-fuel gas cutting torch割枪cutting gun割嘴cutting nozzle/cutting tip快速割嘴divergent nozzle/high-speed nozzle表面割炬gouging blowpipe水下割炬under-water cutting blowpipe水下割条electrode for under-water cutting粉剂罐powder dispenser数控切割机NC cutting machine门式切割机flame planer光电跟踪切割机photo-electric tracing cutting火焰切管机pipe flame cutting machine磁轮式气割机gas cutting machine with magnetic wheels焊接结构welded structure/welded construction焊件weldment焊接部件weld assembly组装件built-up member接头设计joint design焊接应力welding stress焊接瞬时应力transient welding stress焊接残余应力welding residual stress热应力thermal stress收缩应力contraction stress局部应力local stress拘束应力constraint stress固有应力inherent stress固有应变区inherent strain zone残余应力测定residual stress analysis逐层切割法Sach’s methodX射线衍射法X-ray stress analysis小孔释放法Mathar method固有应变法inherent strain method消除应力stress relieving局部消除应力local stress relieving应力重分布stress redistribution退火消除应力stress relieving by annealing温差拉伸消除应力low temperature stress relieving机械拉伸消除应力mechanical stress relieving应力松弛stress relaxation焊接变形welding deformation焊接残余变形welding residual deformation局部变形local deformation角变形angular distortion自由变形free deformation收缩变形contraction deformation错边变形mismatching deformation挠曲变形deflection deformation波浪变形wave-like deformation火焰矫正flame straightening反变形backward deformation焊接力学welding mechanics断裂力学fracture mechanics弹塑性断裂变形elasto-plastic fracture mechanics线弹性断裂力学linear elastic fracture mechanics延性断裂ductile fracture脆性断裂brittle fracture应力腐蚀开裂stress corrosion cracking热应变脆化hot straining embrittlement临界裂纹尺寸critical crack size裂纹扩展速率crack propagation rate裂纹张开位移（COD）crack opening displacement拘束度restraint intensity拘束系数restraint coefficient应变速率strain rate断裂韧度fracture toughness应力强度因子stress intensity factor临界应力强度因子critical stress intensity factors应力腐蚀临界应力强度因子critical stress intensity factor of stress corrosion cracking J积分J-integration罗伯逊止裂试验Robertson crack arrest testESSO试验ESSO test双重拉伸试验doucle tension test韦尔斯宽板拉伸试验Well’s wide plate test帕瑞斯公式Paris formula断裂分析图fracture analysis diagram焊接车间welding shop焊接工作间welding booth焊接工位welding post/welding station焊接环境welding surroundings焊工welder电焊工manual arc welder气焊工gas welder焊接检验员weld inspector焊工培训welders training焊工模拟训练器trainer of synthetic weld焊工考试welder qualification test焊工合格证welder qualification/welder qualified certification 钢板预处理steel plate pretreatment喷沙sand blast喷丸shot blast矫正straighten开坡口bevelling(of the edge)/chanfering装配assembly/fitting安装erect刚性固定rigid fixing装配焊接顺序sequence of fitting and welding焊接工艺评定welding procedure qualification焊接工艺规程welding procedure specification焊接工艺试验welding procedure test焊接工艺卡welding procedure card工序operational sequence焊接材料消耗定额welding consumables quota焊接工时定额welder-hour quota清渣slag removal清根back gouging/back chipping锤击peening返修次数number of rewelding焊接工作台welding bench装焊平台welding platen电磁平台electromagnetic platen焊接翻转机welding tilter焊接回转台floor turnable positioner焊接变位机positioner焊接滚轮架turning rolls焊接操作机manpulator焊工升降台welder’s lifting platform焊接夹具welding jig/fixture磁力夹紧器magnetic jig螺旋推撑器screw operated tensioning unit焊丝盘绕机welding wire coiler焊条压涂机welding electrode extrusion press红外线加热器infra-red heater干燥箱dryer焊条保温筒thermostat for electrode流量计flow meterCO2预热器CO2heaterCO2干燥器CO2desiccator焊接电缆welding cable电缆夹头welding connector地线earth lead地线夹头earth clamp焊接参数记录仪welding parameter recorder焊缝检测规weld gauge喷嘴通针tip cleaner测温笔tempil stick敲渣锤chipping hammer焊接衬垫backing/welding backing保留垫板fusible backing/permanent backing临时垫板temporary backing焊剂垫flux backing惰性气体衬垫inert-gas backing引弧板run-on tab/end tab/starting weld tab引出板run-off tab/end tab定位板strong-back加强勒stiffener嵌条insert套环ferrule面罩helmet滤光镜片filter glass/welding glass防护镜片cover glass/plain glass气焊眼镜welding goggles焊接机器人welding robot点焊机器人spot welding robot弧焊机器人arc welding robot切割机器人cutting robot焊接机器人生产线robot line for welding焊接机器人工作站welding robot station机器人运动自由degree of free for robot机器人工作空间robot working space轨迹重复精度path repeatability点位重复精度PTP repeatability焊接专家系统welding expert system焊接机器人示数welding robot play back焊接图象识别pattern recognition for welding焊接图象处理welding image processing计算机辅助焊接工艺设计computer-aided welding process programming(CAWPP)计算机辅助焊接结构设计computer-aided design for welding structure焊接烟尘weld fume焊接发尘量total amount of fumes焊接烟尘浓度weld fume concentration焊接烟尘容限浓度threshold limit values of weld fume(TLV)焊接发尘速率weld fume emission rate焊接有害气体welding toxic gases/weld harmful gases标定卫生空气需要量nominal hygienic air requirement焊工尘肺pheumocomsis of welder焊工锰中毒chronic occupational manganese poisoning of welder 焊工氟中毒fluorosis of welder焊工金属烟热metal fume fever of welder电光性眼炎eye-flash(arc eye)电光性皮炎electro-photo dermatitis电弧紫外线灼伤ultraviolet ray burn防电击装置voltage reducing device除尘装置dust collection device焊工手套welding gloves护脚welding spats防护鞋shielding shoes焊接欠缺welding imperfection焊接缺陷weld defect气孔blowhole/gas pore针尖状气孔pinhole密集气孔porosity条虫状气孔wormhole裂纹crack表面裂纹surface crack咬边undercut焊瘤overlap凹坑pit烧穿burn through塌陷excessive penetration未焊透incomplete penetration/lack of penetration未熔合lack of fusion/incomplete fusion未焊满incompletely filled weld根部凹陷root concavity电弧擦伤arc scratch夹渣slag inclusion夹杂物inclusion夹钨tungsten inclusion白点fish eye/flake错边misalignment/dislocation试件test piece试样test specimen无损检验nondestructive test破坏检验destructive test外观检查visual examination超声波探伤ultrasonic inspection直射法超声波探伤straight beam method斜射法超声波探伤angle beam method液浸法超声波探伤immersion method射线探伤radiographic inspection/radiographyX射线探伤X-ray radiographic inspectionγ射线探伤gamma-ray inspectionX射线工业电视探伤X-ray industrial television inspection 磁粉探伤magnetic particle inspection电磁探伤electromagnetic inspection/eddy current test 探伤灵敏度flaw detection sensitivity渗透探伤penetration inspection荧光探伤flurescent penetrant inspection着色探伤dye penetrant inspection密封性检验leak test气密性检验air tight test枕形气密检验pillow test耐压检验pressure test水压检验hydraulic test气压检验pneumatic test液晶检验liquid crystal test声发射检测acoustic emission testing面弯试验face bend testing背弯试验root bend test侧弯试验side bend test横弯试验horizontal bend test纵弯试验axial bend test压扁试验squeezing test。
常用焊接专业汉英词汇对照表
等离子弧堆焊 低尘低毒焊条 低氢型焊条 滴状过渡 底层（封底）焊条 地线夹，地线卡 电磁平台 电弧点焊 电弧动特性 电弧焊 电弧静特性 电弧力 电弧偏吹 电弧钎焊 电弧挺度 电弧稳定性 电弧自身调节 电极压力 电容贮能点焊 电石 电渣焊 电子束功率 电阻对焊 电阻钎焊 顶锻 顶锻电流 顶锻力 顶锻时间 定位板 定位焊缝 端接焊缝 短路过渡 短路过渡 断续焊缝 断续角焊缝 锻压时间 堆焊 钝边 钝边厚度 多层焊 多道焊 多点焊 多点凸焊 多丝埋弧焊 惰性气体保护焊 二氧化碳气体保护焊 返修焊 防护白玻璃 飞边 飞溅 飞溅率 非承载焊缝 非转移弧 分段多层焊 分段退焊 风动砂轮 封底焊道 plasma arc surfacing low fume and harmless electrode low hydrogen type electrode; hydrogen controlled electrode globular transfer uranami welding electrode (for root sealing) earthing clamp; ground clamp electromagnetic platen arc spot welding dynamic characteristic of arc arc welding static charactristic of arc arc force arc blow arc brazing arc stiffness arc stability arc self-regulation electrode pressure condenser discharge spot welding carbide electro-slag welding beam power upset butt welding resistance brazing upset upset current upset force upset time strong-back (to control the relative position of the weldment) tack weld edge weld short circuiting transfer short circuiting transfer intermittent weld intermittent fillet weld forge time surfacing;building up welding root face thickness (width) of root face multi-layer welding multi-pass welding multiple-spot welding multiple projection welding multiple-wire submerged arc welding inert-gas arc welding carbon-dioxide arc welding rewelding cover glass upset metal; fin spatter spatter loss coefficient connective weld nontransferred arc block sequence welding (several stages by multi layers) backstep sequence pneumatic grinder back weld; sealing run
焊接专业英汉词典
void 焊接空隙weld flow mark 焊接流痕weld flush 焊缝凸起weld line 焊接纹weld mark 焊接痕weld penetration 熔接透入weld zone 焊接区welding 焊接welding bead 焊接泡welding direction 焊接方向welding distortion 焊接变形welding flux 焊剂welding ground 电熔接地welding interval 焊接周期welding stress 熔接应变welding torch 熔接气炬flash welding 闪光焊接法upset welding 端压焊接电阻焊 resistance welding (RW)点焊 spot welding; resistance spot welding凸焊/浮凸焊法 projection welding缝焊 seam welding滚点焊 roll-spot welding连续点焊 stitch welding多点焊 multiple spot welding手压点焊 push welding; poke welding脉冲点焊 pulsation spot welding; multiple-impulse welding 双面点焊 direct spot welding单面点焊 indirect spot welding串联点焊 series spot welding多点凸焊multiple projection welding频道进缝焊 step-by-step seam welding压平缝焊 mash seam welding串联缝焊 series seam welding对接缝焊 butt seam welding; foil-butt seam电阻对焊 upset butt welding闪光对焊 flash butt welding (FBW)储能焊 stored energy welding电容储能点焊 condenser discharge spot welding高频电阻焊 high frequency resistance welding冲击电阻焊 percussion welding胶接点焊 spot weld-bonding; weld-bonding闪光 flashing; flash过梁 bridge; lintel顶锻 upsetting; upset夹紧力 clamping force顶锻力 upsetting force; upset force电极压力 electrode force; electrode pressure电极滑移 electrode skid焊接循环 welding cycle预压时间 squeeze time锻压时间 forge-delay time; forge time焊接通电时间（电阻焊）welding time (resistance welding) 预热时间 preheat time加热时间 heat time冷却时间 cool time间歇时间 quench time; chill time回火时间 temper time维持时间 hold time休止时间 off time闪光时间flash time; flashing time顶锻时间 upset time; upsetting time有电顶锻时间 upset current time无电顶锻时间 upset current-off time闪光速度 flashing speed闪光电流 flashing current; flash current顶锻电流 upset current预热电流 preheat current回火电流 temper current调伸长度 initial overhange; extension总留量 total allowance闪光留量 flash allowance顶锻留量 upset allowance顶锻速度 upset speed电极接触面 electrode contact surface贴合面 faying surface焊点 welding spot熔核 nugget熔核直径 diameter of nugget塑性金属环区corona bond焊透率penetration rate压痕indentation压痕深度depth of indentation压深率indentation ratio翘离sheet separation缩孔shrinkage cavity胡须intrusion电极粘损electrode pick up喷溅splash/ expulsion毛刺fin飞边upset metal/ fin焊点距weld spacing/ spot weld spacing边距edge distance分流shunt current接触电阻contact resistance电阻焊机resistance welding machine点焊机spot welding machine多点焊机multiple spot welding machine移动式点焊机portable spot welding machine缝焊机seam welding machine纵横两用缝焊机universal seam welder对焊机butt resistance welding machine凸焊机projection welding machine三相低频焊机three phase low frequency welder二次整流电阻焊机direct current resistance welder secondary rectification 电容储能电阻焊机condenser discharge resistance welder电容储能点焊机condenser type spot welder/ capacitor spot welding machine 工频电阻焊机mains frequency resistance welding machine低频电阻焊机frequency converter resistance welding machine高频焊机high frequency induction welder逆变式电阻焊机inverter type resistance welding machine全波阻焊电源full wave resistance welding power source斩波阻焊电源chopped wave resistance welding power source旋转焊接变压器rotary welding transformer点焊钳spot welding headC形点焊钳C-type welding head/ C-type gunX形点焊钳pincer spot welding head/ pliers spot welding head断续器contactor同步断续器synchronous contactor异步断续器non-synchronous contactor程序控制器sequencer程序时间调节器sequencer timer电极臂arm电极握杆electrode holder电极台板backup die/ bolster电极水冷管electrode cooling tube电极头electrode tip电极帽electrode cap锥头电极truncated tip electrode平头电极flat tip electrode尖头电极pointed tip electrode球面电极radius tip electrode偏心电极offest electrode直电极straight electrode弯电极cranked electrode双弯电极double cranked (swannecked) electrode滚轮电极circular electrode/ welding wheel斜棱滚轮电极bevelled wheel顶锻机构upsetting mechanism电极总行程total electrode stroke工作行程operational stroke辅助行程electrode travel/ electrode stroke臂间距离horn spacing/ throat opening电极臂伸出长度arm extension摩擦焊friction welding (FW)转速friction speed摩擦压力friction pressure/ heating pressure摩擦转矩friction torque摩擦时间friction time摩擦变形量burn-off length摩擦变形速度burn-off rate停车时间stopping time顶锻变形量forge length顶锻变形速度forge rate摩擦表面friction surface储能摩擦焊fly-wheel type friction welding径向摩擦焊radial friction welding扩散焊diffusion welding (DW)过渡液相扩散焊transient liquid phase diffusion welding 热等静压扩散焊hot isotatic pressure diffusion welding 热轧扩散焊roll diffusion welding扩散缝焊seam diffusion welding超塑成形扩散焊supperplastic forming diffusion bounding 隔离剂buttering material爆炸焊explosive welding (EW)爆炸点焊explosive spot welding爆炸线焊explosive line welding多层板爆炸焊explosive welding of multiplayer plates多层管爆炸焊explosive welding of multiplayer tubes覆板（覆管）cladding plat (tube)/ flyer plate (tube)基板（基管）base plate(tube)/ parent plate (tube)保护层buffer/ protector基础base预置角preset angle间距initial stand-off/ spacing装药量explosive load装药密度charge density/ loading density质量比mass ratio平行法parallel plate configuration角度法preset angle configuration均匀布药average arranging explosive梯形布药gradient arranging explosive爆炸焊参数explosive welding parameters初始参数initial parameters动态参数dynamic parameters界面参数interface parameters爆轰速度detonation velocity覆板速度cladding plate velocity碰撞点impact point碰撞点速度velocity of the impact point弯折角bending angle碰撞角collision angle碰撞压力impact pressure格尼能Gurney energy垂直碰撞normal impact倾斜碰撞oblique impact/ inclined impact对称碰撞symmetrical impact来流upper stream出流down stream再入射流re-entrant jet自清理oneself cleaning结合区bond zone平面结合plane bond波状结合wave-like bond界面波长length of the interfacial wave界面波幅amplitude of the interfacial wave 熔化层molten layer熔化袋molten pocket雷管区detonator zone边界效应edge effect焊接性窗口weldability windows焊着率ratio of welding area起爆方法method of initiation内爆法internal explosion process外爆法external explosion process半圆柱试验法semi-cylinder experiment method 超声波焊ultrasonic welding (UW)超声波点焊ultrasonic spot welding超声波缝焊ultrasonic seam welding超声波点焊机ultrasonic spot welder超声波缝焊机ultrasonic seam welder冷压焊cold pressure welding (CPW)热压焊hot pressure welding热轧焊hot roll welding旋弧压力焊rotating arc pressure welding埋弧压力焊submerged arc pressure welding电渣压力焊electroslag pressure welding气压焊gas pressure welding锻焊forge-welding/ blacksmith welding磁力脉冲焊magnetic-pulse welding硬钎焊brazing软钎焊soldering烙铁钎焊iron soldering火焰钎焊torch brazing/ torch soldering热风钎焊hot gas soldering感应钎焊induction brazing电阻钎焊resistance brazing接触反应钎焊contact-reaction brazing电弧钎焊arc brazing浸渍钎焊dip brazing/ dip soldering盐浴钎焊saltbath dip brazing (soldering)金属浴钎焊molten metal bath dip brazing炉中钎焊furnace brazing/ furnace soldering保护气氛钎焊brazing in controlled atmosphere真空钎焊vacuum brazing蒸气钎焊vapor phase soldering超声波钎焊ultrasonic soldering扩散钎焊diffusion brazing波峰钎焊flow soldering/ wave soldering分级钎焊step brazing/ step soldering不等间隙钎焊brazing with the unparalleled clearance红外线钎焊infra-red brazing (soldering)光束钎焊light soldering (brazing)激光钎焊laser brazing (soldering)电子束钎焊electron beam brazing钎接焊braze-welding钎料brazing filler metal/ solder硬钎料brazing filler metal软钎料solder (m)自钎剂钎料self-fluxing brazing alloy/ self-fluxing filler metal 活性钎料active filler metal/ active metal brazing alloy成形钎料preformed filler metal/ solder preform非晶态钎料amorphous filler metal粉状钎料powdered filler metal钎料膏braze cream/ braze paste/ solder cream/ solder paste 药皮钎料 flux coated brazing(soldering)rod层状钎料 sandwich filler metal药芯钎料丝 flux-cored colder wire敷钎料板 clad brazing sheet钎剂 brazing flux; soldering flux气体钎剂 gas flux反应钎剂 reaction flux松香钎剂 colophony flux; rosin flux钎剂膏 flux paste阻流剂 stopping-off agent钎剂活性 flux activity钎剂活性温度范围 activation temperature range of flux钎剂热稳定性thermal stability of flux钎焊过程 brazing (soldering) process钎焊操作 brazing (soldering) operation工艺镀层 technological coating钎焊面 faying face钎缝间缝 joint gap; joint clearance钎焊参数 brazing process variables钎焊温度 brazing temperature钎焊时间 brazing time钎焊保温时间 holding time of brazing钎缝 brazing seam; soldering seam钎缝界面区 interfacial region钎缝金属 brace metal钎角 fillet钎焊接头 braced joint; soldered joint平面搭接头 joggled lap joint; flush lap joint搭接对接接头 butt and lap joint搭接T形接头 lapped T-joint; flanged T-joint锁缝接头 folded joint平面锁缝接头 lick side seam joint; flat lock seam joint锁缝角接接头 lock corner joint; corner double seam嵌入T形接头 inset T jointT形管接头 branch T saddle joint套管接头 socket joint外喇叭口套管接头 flare tube fitting扩口套管接头 spigot joint钎焊性 brazability; solderability润湿性 wettability润湿角 wetting angle; contact angle铺展性 spreadability铺展系数 spread factor; coefficient of spreading钎着率 brazed rate脱钎 de-brazing; de-soldering润湿称量试验 wetting balance test铺展性试验 spreadability test填缝性试验 clearance fillability test未钎透 incomplete penetration虚钎 cold soldered joint钎料熔析 liquation of filler metal溶蚀 erosion钎料流失 brazing filler metal erosion钎剂夹杂 flux inclusion晶间渗入 intergranular penetration波峰钎焊机 wave soldering machine冷壁真空钎焊炉 cold wall type vacuum brazing热壁真空钎焊炉 hot wall type vacuum brazing furnace 钎焊盒 brazing retort钎剂涂敷器 fluxer钎炬 brazing (soldering) blowpipe喷灯 brazing lamp烙铁 solder iron热喷涂 thermal spraying火焰喷涂 flame spraying电弧喷涂 electric arc spraying等离子喷涂 plasma spraying高频感应喷涂 high frequency spraying气体爆燃式喷涂 detonation flame spraying金属喷涂 metal spraying; metallizing塑料喷涂 plastic spraying陶瓷喷涂 ceramic spraying喷熔 spray-fusing表面粗糙化处理 surface roughening电火花拉毛 electrospark roughening抛锚效应 anchoring喷涂层 spray-fused coating喷熔层 spray-fused coating结合层 bond coating; under coating工作层 work coating结合强度 adhesive strength涂层强度 strength of coating封孔处理 sealing封孔剂 sealant喷涂率 spray rate沉积效率 deposition efficiency孔隙率 porosity喷涂材料 spraying material自熔剂合金粉末 self-fluxing alloy powder喷炬（枪）spray torch;热切割 thermal cutting (TC)气割 gas cutting; oxygen cutting氧溶剂切割 powder cutting氧-石英砂切割 quartz powder cutting电弧切割 arc cutting氧气电弧切割 oxy-arc cutting空气电弧切割 air arc cutting等离子弧切割 plasma arc cutting (PAC)空气等离子弧切割 air plasma arc cutting氧等离子切割 oxygen plasma arc cutting水再压缩空气等离子弧切割 air plasma water injection arc cutting双层气流等离子弧切割 dual gas plasma arc cutting; shielded gas plasma arc cutting 激光切割 laser cutting(LC); laser beam cutting电子束切割 electron beam cutting喷气激光切割 gas jet laser cutting碳弧切割 carbon arc cutting水下切割 underwater cutting喷水式水下电弧切割 waterjet method underwater arc cutting氧矛切割 oxygen lancing; oxygen lance cutting溶剂氧切割 powder lancing手工气割 manual oxygen cutting自动气割 automatic oxygen cutting仿形切割 shape cutting数控切割 NC (numerical-control) cutting快速切割 high-speed cutting垂直切割 square cut叠板切割 stack cutting坡口切割 beveling; bevel cutting碳弧气割 carbon arc air gouging火焰气刨 flame gouging火焰表面清理 scarfing氧熔剂表面修整powder washing预热火焰preheat flame预热氧preheat oxygen切割氧cutting oxygen/ cutting stream切割速度cutting speed切割线lone of cut/ cut line切割面face of cut/ cut face切口kerf切口上缘cutting shoulder切口宽度kerf width后拖量drag切割面平面度evenness of cutting surface/ planeness of cutting surface 割纹深度depth of cutting veins/ stria depth切割面质量quality of cut face上缘熔化度shoulder meltability/ melting degree of shoulder切口角kerf angle缺口notch挂渣adhering slag结瘤dross割炬cutting torch/ cutting blowpipe/ oxygen-fuel gas cutting torch割枪cutting gun割嘴cutting nozzle/ cutting tip快速割嘴divergent nozzle/ high-speed nozzle表面割炬gouging blowpipe水下割炬under-water cutting blowpipe水下割条electrode for under-water cutting粉剂罐powder dispenser数控切割机NC cutting machine门式切割机flame planer光电跟踪切割机photo-electric tracing cutting火焰切管机pipe flame cutting machine磁轮式气割机gas cutting machine with magnetic wheels焊接结构welded structure/ welded construction焊件weldment焊接部件weld assembly组装件built-up member接头设计joint design焊接应力welding stress焊接瞬时应力transient welding stress焊接残余应力welding residual stress热应力thermal stress收缩应力contraction stress局部应力local stress拘束应力constraint stress固有应力inherent stress固有应变区inherent strain zone残余应力测定residual stress analysis逐层切割法Sach’s methodX射线衍射法X-ray stress analysis小孔释放法Mathar method固有应变法inherent strain method消除应力stress relieving局部消除应力local stress relieving应力重分布stress redistribution退火消除应力stress relieving by annealing温差拉伸消除应力low temperature stress relieving机械拉伸消除应力mechanical stress relieving应力松弛stress relaxation焊接变形welding deformation焊接残余变形welding residual deformation局部变形local deformation角变形angular distortion自由变形free deformation收缩变形contraction deformation错边变形mismatching deformation挠曲变形deflection deformation波浪变形wave-like deformation火焰矫正flame straightening反变形backward deformation焊接力学welding mechanics断裂力学fracture mechanics弹塑性断裂变形elasto-plastic fracture mechanics线弹性断裂力学linear elastic fracture mechanics延性断裂ductile fracture脆性断裂brittle fracture应力腐蚀开裂stress corrosion cracking热应变脆化hot straining embrittlement临界裂纹尺寸critical crack size裂纹扩展速率crack propagation rate裂纹张开位移（COD）crack opening displacement拘束度restraint intensity拘束系数restraint coefficient应变速率strain rate断裂韧度fracture toughness应力强度因子stress intensity factor临界应力强度因子critical stress intensity factors应力腐蚀临界应力强度因子critical stress intensity factor of stress corrosion cracking J积分J-integration罗伯逊止裂试验Robertson crack arrest testESSO试验ESSO test双重拉伸试验doucle tension test韦尔斯宽板拉伸试验Well’s wide plate test帕瑞斯公式Paris formula断裂分析图fracture analysis diagram焊接车间welding shop焊接工作间welding booth焊接工位welding post/ welding station焊接环境welding surroundings焊工welder电焊工manual arc welder气焊工gas welder焊接检验员weld inspector焊工培训welders training焊工模拟训练器trainer of synthetic weld焊工考试welder qualification test焊工合格证welder qualification/ welder qualified certification 钢板预处理steel plate pretreatment喷沙sand blast喷丸shot blast矫正straighten开坡口bevelling (of the edge)/ chanfering装配assembly/ fitting安装erect刚性固定rigid fixing装配焊接顺序sequence of fitting and welding焊接工艺评定welding procedure qualification焊接工艺规程welding procedure specification焊接工艺试验welding procedure test焊接工艺卡welding procedure card工序operational sequence焊接材料消耗定额welding consumables quota焊接工时定额welder-hour quota清渣slag removal清根back gouging/ back chipping锤击peening返修次数number of rewelding焊接工作台welding bench装焊平台welding platen电磁平台electromagnetic platen焊接翻转机welding tilter焊接回转台floor turnable positioner焊接变位机positioner焊接滚轮架turning rolls焊接操作机manpulator焊工升降台welder’s lifting platform焊接夹具welding jig/ fixture磁力夹紧器magnetic jig螺旋推撑器screw operated tensioning unit焊丝盘绕机welding wire coiler焊条压涂机welding electrode extrusion press红外线加热器infra-red heater干燥箱dryer焊条保温筒thermostat for electrode流量计flow meterCO2预热器CO2 heaterCO2干燥器CO2 desiccator焊接电缆welding cable电缆夹头welding connector地线earth lead地线夹头earth clamp焊接参数记录仪welding parameter recorder焊缝检测规weld gauge喷嘴通针tip cleaner测温笔tempil stick敲渣锤chipping hammer焊接衬垫backing/ welding backing保留垫板fusible backing/ permanent backing临时垫板temporary backing焊剂垫flux backing惰性气体衬垫inert-gas backing引弧板run-on tab/ end tab/ starting weld tab引出板run-off tab/ end tab定位板strong-back加强勒stiffener嵌条insert套环ferrule面罩helmet滤光镜片filter glass/ welding glass防护镜片cover glass/ plain glass气焊眼镜welding goggles焊接机器人welding robot点焊机器人spot welding robot弧焊机器人arc welding robot切割机器人cutting robot焊接机器人生产线robot line for welding焊接机器人工作站welding robot station机器人运动自由degree of free for robot机器人工作空间robot working space轨迹重复精度path repeatability点位重复精度PTP repeatability焊接专家系统welding expert system焊接机器人示数welding robot play back焊接图象识别pattern recognition for welding焊接图象处理welding image processing计算机辅助焊接工艺设计computer-aided welding process programming (CAWPP) 计算机辅助焊接结构设计computer-aided design for welding structure焊接烟尘weld fume焊接发尘量total amount of fumes焊接烟尘浓度weld fume concentration焊接烟尘容限浓度threshold limit values of weld fume (TLV)焊接发尘速率weld fume emission rate焊接有害气体welding toxic gases/ weld harmful gases标定卫生空气需要量nominal hygienic air requirement焊工尘肺pheumocomsis of welder焊工锰中毒chronic occupational manganese poisoning of welder 焊工氟中毒fluorosis of welder焊工金属烟热metal fume fever of welder电光性眼炎eye-flash (arc eye)电光性皮炎electro-photo dermatitis电弧紫外线灼伤ultraviolet ray burn防电击装置voltage reducing device除尘装置dust collection device焊工手套welding gloves护脚welding spats防护鞋shielding shoes焊接欠缺welding imperfection焊接缺陷weld defect气孔blowhole/ gas pore针尖状气孔pinhole密集气孔porosity条虫状气孔wormhole裂纹crack表面裂纹surface crack咬边undercut焊瘤overlap凹坑pit烧穿burn through塌陷excessive penetration未焊透incomplete penetration/ lack of penetration未熔合lack of fusion/ incomplete fusion未焊满incompletely filled weld根部凹陷root concavity电弧擦伤arc scratch夹渣slag inclusion夹杂物inclusion夹钨tungsten inclusion白点fish eye/ flake错边misalignment/ dislocation试件test piece试样test specimen。
焊接专业英汉词典2
焊接专业英汉词典（2）resistance welding (RW)pot welding；resistance spot weldingrojection weldingeam weldingroll-spot welding焊 stitch weldingmultiple spot welding焊 push welding；poke welding焊 indirect spot welding焊 direct spot welding焊 pulsation spot welding；multiple-impulse welding 网 ）焊 series spot welding焊 multiple projection welding缝焊 step-by-step seam welding焊 mash seam welding焊 series seam welding焊 butt seam welding；foil-butt seam焊 upset butt welding焊 flash butt welding (FBW)stored energy welding能点焊 condenser discharge spot welding阻焊 high frequency resistance welding 金属喷涂 metal spraying；metallizing塑料喷涂 plastic spraying陶瓷喷涂 ceramic spraying喷熔 spray-fusing表面粗糙化处理 surface roughening电火花拉毛 electrospark roughening抛锚效应 anchoring喷涂层 spray-fused coating喷熔层 spray-fused coating结合层 bond coating；under coating工作层 work coating结合强度 adhesive strength涂层强度 strength of coating封孔处理 sealing封孔剂 sealant喷涂率 spray rate沉积效率 deposition efficiency孔隙率 porosity喷涂材料 spraying material自熔剂合金粉末 self-fluxing alloy powder 喷炬（枪） spray torch；热切割 thermal cutting (TC)气割 gas cutting；oxygen cutting阻焊 percussion welding焊 spot weld-bonding；weld-bondinglashing；flashridge；lintelpsetting；upsetclamping forceupsetting force；upset force力 electrode force；electrode pressure移 electrode skid环 welding cycle间 squeeze time间 forge-delay time；forge time电时间（电阻焊） welding time (resistance welding) 间 preheat time间 heat time间 cool time间 quench time；chill time间 temper time间 hold time间 off time间 flash time；flashing time间 upset time；upsetting time锻时间 upset current time锻时间 upset current-off time 氧溶剂切割 powder cutting氧-石英砂切割 quartz powder cutting电弧切割 arc cutting氧气电弧切割 oxy-arc cutting空气电弧切割 air arc cutting等离子弧切割 plasma arc cutting (PAC)空气等离子弧切割 air plasma arc cutting氧等离子切割 oxygen plasma arc cutting水再压缩空气等离子弧切割 air plasma water injection arc 双层气流等离子弧切割 dual gas plasma arc cutting；shield plasma arc cutting激光切割 laser cutting(LC)；laser beam cutting电子束切割 electron beam cutting喷气激光切割 gas jet laser cutting碳弧切割 carbon arc cutting水下切割 underwater cutting喷水式水下电弧切割 waterjet method underwater arc cuttin 氧矛切割 oxygen lancing；oxygen lance cutting溶剂氧切割 powder lancing手工气割 manual oxygen cutting自动气割 automatic oxygen cutting仿形切割 shape cutting数控切割 NC (numerical-control) cutting度 flashing speed流 flashing current；flash current 流 upset current流 preheat current流 temper current度 initial overhange；extensiontotal allowance量 flash allowance量 upset allowance度 upset speed触面 electrode contact surfacefaying surfaceelding spotugget径 diameter of nugget属环区 corona bondpenetration ratendentation度 depth of indentationindentation ratioheet separationhrinkage cavityntrusion 快速切割 high-speed cutting垂直切割 square cut叠板切割 stack cutting坡口切割 beveling；bevel cutting碳弧气割 carbon arc air gouging火焰气刨 flame gouging火焰表面清理 scarfing氧熔剂表面修整 powder washing预热火焰 preheat flame预热氧 preheat oxygen切割氧 cutting oxygen/ cutting stream切割速度 cutting speed切割线 lone of cut/ cut line切割面 face of cut/ cut face切口 kerf切口上缘 cutting shoulder切口宽度 kerf width后拖量 drag切割面平面度 evenness of cutting surface/ planeness of c surface割纹深度 depth of cutting veins/ stria depth切割面质量 quality of cut face上缘熔化度 shoulder meltability/ melting degree of shoul 切口角 kerf angle损 electrode pick upplash/ expulsioninpset metal/ finweld spacing/ spot weld spacingdge distancehunt current阻 contact resistance机 resistance welding machinespot welding machine机 multiple spot welding machine点焊机 portable spot welding machineseam welding machine用缝焊机 universal seam welderbutt resistance welding machineprojection welding machine频焊机 three phase low frequency welder流电阻焊机 direct current resistance welder secondary cation能电阻焊机 condenser discharge resistance welder能点焊机 condenser type spot welder/ capacitor spot welding阻焊机 mains frequency resistance welding machine阻焊机 frequency converter resistance welding machine缺口 notch挂渣 adhering slag结瘤 dross割炬 cutting torch/ cutting blowpipe/ oxygen-fuel gas cu torch割枪 cutting gun割嘴 cutting nozzle/ cutting tip快速割嘴 divergent nozzle/ high-speed nozzle表面割炬 gouging blowpipe水下割炬 under-water cutting blowpipe水下割条 electrode for under-water cutting粉剂罐 powder dispenser数控切割机 NC cutting machine门式切割机 flame planer光电跟踪切割机 photo-electric tracing cutting火焰切管机 pipe flame cutting machine磁轮式气割机 gas cutting machine with magnetic wheels 焊接结构 welded structure/ welded construction焊件 weldment焊接部件 weld assembly组装件 built-up member接头设计 joint design焊接应力 welding stress焊接瞬时应力 transient welding stress机 high frequency induction welder电阻焊机 inverter type resistance welding machine焊电源 full wave resistance welding power source焊电源 chopped wave resistance welding power source接变压器 rotary welding transformerspot welding head焊钳 C-type welding head/ C-type gun焊钳 pincer spot welding head/ pliers spot welding head contactor续器 synchronous contactor续器 non-synchronous contactor制器 sequencer间调节器 sequencer timerarm杆 electrode holder板 backup die/ bolster冷管 electrode cooling tubeelectrode tipelectrode cap极 truncated tip electrode极 flat tip electrode极 pointed tip electrode极 radius tip electrode极 offest electrode 焊接残余应力 welding residual stress热应力 thermal stress收缩应力 contraction stress局部应力 local stress拘束应力 constraint stress固有应力 inherent stress固有应变区 inherent strain zone残余应力测定 residual stress analysis逐层切割法Sach’s methodX射线衍射法 X-ray stress analysis小孔释放法 Mathar method固有应变法 inherent strain method消除应力 stress relieving局部消除应力 local stress relieving应力重分布 stress redistribution退火消除应力 stress relieving by annealing温差拉伸消除应力 low temperature stress relieving 机械拉伸消除应力 mechanical stress relieving应力松弛 stress relaxation焊接变形 welding deformation焊接残余变形 welding residual deformation局部变形 local deformation角变形 angular distortion自由变形 free deformationstraight electrodecranked electrode极 double cranked (swannecked) electrode 极 circular electrode/ welding wheel轮电极 bevelled wheel构 upsetting mechanism行程 total electrode stroke程 operational stroke程 electrode travel/ electrode stroke离 horn spacing/ throat opening伸出长度 arm extensionfriction welding (FW)riction speed力 friction pressure/ heating pressure 矩 friction torque间 friction time形量 burn-off length形速度 burn-off rate间 stopping time形量 forge length形速度 forge rate面 friction surface擦焊 fly-wheel type friction welding擦焊 radial friction welding 收缩变形 contraction deformation错边变形 mismatching deformation挠曲变形 deflection deformation波浪变形 wave-like deformation火焰矫正 flame straightening反变形 backward deformation焊接力学 welding mechanics断裂力学 fracture mechanics弹塑性断裂变形 elasto-plastic fracture mechanics线弹性断裂力学 linear elastic fracture mechanics延性断裂 ductile fracture脆性断裂 brittle fracture应力腐蚀开裂 stress corrosion cracking热应变脆化 hot straining embrittlement临界裂纹尺寸 critical crack size裂纹扩展速率 crack propagation rate裂纹张开位移（COD）crack opening displacement拘束度 restraint intensity拘束系数 restraint coefficient应变速率 strain rate断裂韧度 fracture toughness应力强度因子 stress intensity factor临界应力强度因子 critical stress intensity factors应力腐蚀临界应力强度因子 critical stress intensity factodiffusion welding (DW)相扩散焊 transient liquid phase diffusion welding 压扩散焊 hot isotatic pressure diffusion welding 散焊 roll diffusion welding焊 seam diffusion welding形扩散焊 supperplastic forming diffusion bounding buttering materialexplosive welding (EW)焊 explosive spot welding焊 explosive line welding爆炸焊 explosive welding of multiplayer plates爆炸焊 explosive welding of multiplayer tubes覆管） cladding plat (tube)/ flyer plate (tube)基管） base plate(tube)/ parent plate (tube)buffer/ protectorasepreset anglenitial stand-off/ spacingexplosive load度 charge density/ loading densitymass ratioparallel plate configurationpreset angle configuration药 average arranging explosive stress corrosion crackingJ积分 J-integration罗伯逊止裂试验 Robertson crack arrest testESSO试验 ESSO test双重拉伸试验 doucle tension test韦尔斯宽板拉伸试验Well’s wide plate test帕瑞斯公式 Paris formula断裂分析图 fracture analysis diagram焊接车间 welding shop焊接工作间 welding booth焊接工位 welding post/ welding station焊接环境 welding surroundings焊工 welder电焊工 manual arc welder气焊工 gas welder焊接检验员 weld inspector焊工培训 welders training焊工模拟训练器 trainer of synthetic weld焊工考试 welder qualification test焊工合格证 welder qualification/ welder qualified certif 钢板预处理 steel plate pretreatment喷沙 sand blast喷丸 shot blast矫正 straighten药 gradient arranging explosive参数 explosive welding parameters 数 initial parameters数 dynamic parameters数 interface parameters度 detonation velocity度 cladding plate velocityimpact point速度 velocity of the impact point bending anglecollision angle力 impact pressureGurney energy撞 normal impact撞 oblique impact/ inclined impact 撞 symmetrical impactpper streamown stream流 re-entrant jetoneself cleaningbond zone合 plane bond合 wave-like bond长 length of the interfacial wave 开坡口 bevelling (of the edge)/ chanfering 装配 assembly/ fitting安装 erect刚性固定 rigid fixing装配焊接顺序 sequence of fitting and welding 焊接工艺评定 welding procedure qualification 焊接工艺规程 welding procedure specification 焊接工艺试验 welding procedure test焊接工艺卡 welding procedure card工序 operational sequence焊接材料消耗定额 welding consumables quota 焊接工时定额 welder-hour quota清渣 slag removal清根 back gouging/ back chipping锤击 peening返修次数 number of rewelding焊接工作台 welding bench装焊平台 welding platen电磁平台 electromagnetic platen焊接翻转机 welding tilter焊接回转台 floor turnable positioner焊接变位机 positioner焊接滚轮架 turning rolls焊接操作机 manpulator幅 amplitude of the interfacial wave molten layermolten pocketdetonator zone应 edge effect窗口 weldability windowsratio of welding area法 method of initiationinternal explosion processexternal explosion process试验法 semi-cylinder experiment method 焊 ultrasonic welding (UW)点焊 ultrasonic spot welding缝焊 ultrasonic seam welding点焊机 ultrasonic spot welder缝焊机 ultrasonic seam weldercold pressure welding (CPW)hot pressure weldinghot roll welding力焊 rotating arc pressure welding力焊 submerged arc pressure welding力焊 electroslag pressure weldinggas pressure weldingorge-welding/ blacksmith welding 焊工升降台welder’s lifting platform焊接夹具 welding jig/ fixture磁力夹紧器 magnetic jig螺旋推撑器 screw operated tensioning unit焊丝盘绕机 welding wire coiler焊条压涂机 welding electrode extrusion press 红外线加热器 infra-red heater干燥箱 dryer焊条保温筒 thermostat for electrode流量计 flow meterCO2预热器 CO2 heaterCO2干燥器 CO2 desiccator焊接电缆 welding cable电缆夹头 welding connector地线 earth lead地线夹头 earth clamp焊接参数记录仪 welding parameter recorder焊缝检测规 weld gauge喷嘴通针 tip cleaner测温笔 tempil stick敲渣锤 chipping hammer焊接衬垫 backing/ welding backing保留垫板 fusible backing/ permanent backing 临时垫板 temporary backing冲焊 magnetic-pulse weldingbrazingsoldering焊 iron soldering焊 torch brazing/ torch soldering焊 hot gas soldering焊 induction brazing焊 resistance brazing应钎焊 contact-reaction brazing焊 arc brazing焊 dip brazing/ dip soldering焊 saltbath dip brazing (soldering)钎焊 molten metal bath dip brazing焊 furnace brazing/ furnace soldering氛钎焊 brazing in controlled atmosphere焊 vacuum brazing焊 vapor phase soldering钎焊 ultrasonic soldering焊 diffusion brazing焊 flow soldering/ wave soldering焊 step brazing/ step soldering隙钎焊 brazing with the unparalleled clearance 钎焊 infra-red brazing (soldering)焊 light soldering (brazing) 焊剂垫 flux backing惰性气体衬垫 inert-gas backing引弧板 run-on tab/ end tab/ starting weld tab 引出板 run-off tab/ end tab定位板 strong-back加强勒 stiffener嵌条 insert套环 ferrule面罩 helmet滤光镜片 filter glass/ welding glass防护镜片 cover glass/ plain glass气焊眼镜 welding goggles焊接机器人 welding robot点焊机器人 spot welding robot弧焊机器人 arc welding robot切割机器人 cutting robot焊接机器人生产线 robot line for welding焊接机器人工作站 welding robot station机器人运动自由 degree of free for robot机器人工作空间 robot working space轨迹重复精度 path repeatability点位重复精度 PTP repeatability焊接专家系统 welding expert system焊接机器人示数 welding robot play back焊 laser brazing (soldering)钎焊 electron beam brazingbraze-weldingrazing filler metal/ solderbrazing filler metalsolder (m)钎料 self-fluxing brazing alloy/ self-fluxing filler metal 料 active filler metal/ active metal brazing alloy料 preformed filler metal/ solder preform钎料 amorphous filler metal料 powdered filler metalbraze cream/ braze paste/ solder cream/ solder paste料 flux coated brazing(soldering)rod料 sandwich filler metal料丝 flux-cored colder wire板 clad brazing sheetrazing flux；soldering flux剂 gas flux剂 reaction flux剂 colophony flux；rosin fluxflux pastestopping-off agent性 flux activity性温度范围 activation temperature range of flux焊接图象识别 pattern recognition for welding焊接图象处理 welding image processing计算机辅助焊接工艺设计 computer-aided welding process programming (CAWPP)计算机辅助焊接结构设计 computer-aided design for welding structure焊接烟尘 weld fume焊接发尘量 total amount of fumes焊接烟尘浓度 weld fume concentration焊接烟尘容限浓度 threshold limit values of weld fume (TL 焊接发尘速率 weld fume emission rate焊接有害气体 welding toxic gases/ weld harmful gases标定卫生空气需要量 nominal hygienic air requirement焊工尘肺 pheumocomsis of welder焊工锰中毒 chronic occupational manganese poisoning of w 焊工氟中毒 fluorosis of welder焊工金属烟热 metal fume fever of welder电光性眼炎 eye-flash (arc eye)电光性皮炎 electro-photo dermatitis电弧紫外线灼伤 ultraviolet ray burn防电击装置 voltage reducing device除尘装置 dust collection device焊工手套 welding gloves护脚 welding spats稳定性 thermal stability of flux程 brazing (soldering) process作 brazing (soldering) operation网 ）层 technological coatingfaying face缝 joint gap；joint clearance数 brazing process variables度 brazing temperature间 brazing time温时间 holding time of brazingrazing seam；soldering seam面区 interfacial region属 brace metalillet头 braced joint；soldered joint接头 joggled lap joint；flush lap joint接接头 butt and lap joint形接头 lapped T-joint；flanged T-joint头 folded joint缝接头 lick side seam joint；flat lock seam joint 接接头 lock corner joint；corner double seam形接头 inset T joint接头 branch T saddle joint 防护鞋 shielding shoes焊接欠缺 welding imperfection焊接缺陷 weld defect气孔 blowhole/ gas pore针尖状气孔 pinhole密集气孔 porosity条虫状气孔 wormhole裂纹 crack表面裂纹 surface crack咬边 undercut焊瘤 overlap凹坑 pit烧穿 burn through塌陷 excessive penetration未焊透 incomplete penetration/ lack of penetration 未熔合 lack of fusion/ incomplete fusion未焊满 incompletely filled weld根部凹陷 root concavity电弧擦伤 arc scratch夹渣 slag inclusion夹杂物 inclusion夹钨 tungsten inclusion白点 fish eye/ flake错边 misalignment/ dislocation头 socket joint口套管接头 flare tube fitting管接头 spigot jointbrazability；solderabilitywettabilitywetting angle；contact anglespreadability数 spread factor；coefficient of spreadingbrazed ratee-brazing；de-soldering量试验 wetting balance test试验 spreadability test试验 clearance fillability testincomplete penetrationold soldered joint析 liquation of filler metalrosion失 brazing filler metal erosion杂 flux inclusion入 intergranular penetration焊机 wave soldering machine空钎焊炉 cold wall type vacuum brazing空钎焊炉 hot wall type vacuum brazing furnace brazing retort 试件 test piece试样 test specimen无损检验 nondestructive test破坏检验 destructive test外观检查 visual examination超声波探伤 ultrasonic inspection直射法超声波探伤 straight beam method斜射法超声波探伤 angle beam method液浸法超声波探伤 immersion method射线探伤 radiographic inspection/ radiographyX射线探伤 X-ray radiographic inspectionγ射线探伤 gamma-ray inspectionX射线工业电视探伤 X-ray industrial television inspection 磁粉探伤 magnetic particle inspection电磁探伤 electromagnetic inspection/ eddy current test 探伤灵敏度 flaw detection sensitivity渗透探伤 penetration inspection荧光探伤 flurescent penetrant inspection着色探伤 dye penetrant inspection密封性检验 leak test气密性检验 air tight test枕形气密检验 pillow test耐压检验 pressure test水压检验 hydraulic test敷器 fluxerrazing (soldering) blowpiperazing lampolder ironthermal spraying涂 flame spraying涂 electric arc spraying喷涂 plasma spraying应喷涂 high frequency spraying燃式喷涂 detonation flame spraying 气压检验 pneumatic test液晶检验 liquid crystal test声发射检测 acoustic emission testing面弯试验 face bend testing背弯试验 root bend test侧弯试验 side bend test横弯试验 horizontal bend test纵弯试验 axial bend test压扁试验 squeezing test（焊接网 。
焊接专业英汉词典
焊接专业英汉词典（1）熔接fusion welding压接pressure welding焊接过程welding process焊接技术welding technique焊接工艺welding technology/procedure焊接操作welding operation焊接顺序welding sequence焊接方向direction of welding焊接位置welding position熔敷顺序build-up sequence/deposition sequence 焊缝倾角weld slope/inclination of weld axis焊缝转角weld rotation/angle of rotation平焊位置flat position of welding横焊位置horizontal position of welding立焊位置vertical position of welding仰焊位置overhead position of welding平焊downhand welding/flat position welding横焊horizontal position welding立焊vertical position welding仰焊overhead position welding全位置焊all position welding：熔焊时，焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。
如水平固定管所进行的环缝焊接向下立焊vertical down welding/downward welding in the vertical position向上立焊vertical up welding/upward welding in th e vertical position倾斜焊inclined position welding上坡焊upward welding in the inclined position下坡焊downward welding in the inclined position 对接焊butt welding角焊fillet welding搭接焊lap welding船形焊fillet welding in the downhand position/fille t welding in the flat position平角焊horizontal fillet welding立角焊fillet welding in the vertical position仰角焊fillet welding in the overhead position坡口焊groove weldingI形坡口对接焊square butt welding喇叭形坡口焊flare groove welding卷边焊flanged edge welding纵缝焊接welding of longitudinal seam横缝焊接welding of transverse seam环缝焊接girth welding/ circumferential螺旋缝焊接welding of spiral seam/welding of helic al seam环缝对接焊butt welding of circumferential seam 定位焊tack welding 单面焊welding by one side双面焊welding by both sides单道焊single pass welding/single run welding多道焊multi-pass welding单层焊single layer welding多层焊multi-layer welding分段多层焊block sequence/ block welding分层多道焊multi-layer and multi-pass welding连续焊continuous welding断续焊intermittent welding打底焊backing weld封底焊back sealing weld盖面焊cosmetic welding深熔焊deep penetration welding摆动焊welding with weaving/weave bead welding 前倾焊foreward welding (英国)/ forehand welding (美国)后倾焊backward w elding(英国)/ backhand weldin g(美国)分段退焊backstep welding跳焊skip welding对称焊balanced welding/ balanced welding seque nce左焊法leftward welding /forehand welding右焊法rightward welding /backhand welding挑弧焊whipping method自动焊automatic welding手工焊manual welding/hand welding车间焊接shop welding工地焊接site welding(英国)/ field welding (美国)拘束焊接restraint welding堆焊surfacing/building up/overlaying隔离层堆焊buttering端部周边焊boxing/end return返修焊rewelding补焊repair welding塞焊plug welding槽焊slot welding衬垫焊welding with backing焊剂垫焊welding with flux backing窄间隙焊narrow-gap welding强制成形焊enclosed welding脉冲电弧焊pulsed are welding电弧点焊arc spot welding螺柱焊stud welding热风焊hot gas welding高能焊high grade energy welding固态焊接solid-state welding单面焊双面成形one-side welding with back formati on焊接条件welding condition焊接工艺参数welding parameter极性polarity正接electrode negative/straight polarity反接electrode positive/reversed polarity运条方式manipulation of electrode焊接电流welding current焊接电流增加时间welding current upslope time焊接电流衰减时间welding current downslope time 电流密度current density短路电流short circuit current脉冲电流pulse level/pulse current level脉冲电流幅值pulse current amplitude基值电流background level脉冲频率pulse frequency脉冲焊接电流占空比duty cycle of pulse duration电弧电压arc voltage再引弧电压reignition voltage焊接速度welding speed行走速度rate of travel/travel speed送丝速度wire feed rate线能量heat input/energy input热输入heat input预热preheat后热postheat焊后热处理posweld heat treatment/postheat treat ment预热温度preheat temperature层间温度interpass temperature焊接终了温度finishing temperature后热温度postheating temperature焊丝伸出长度wire extension弧长arc length熔化速度melting rate熔化时间melting time熔化系数melting coefficient熔敷速度rate of deposition/deposition rate熔敷系数deposition coefficient熔敷效率deposition efficiency损失系数loss coefficient飞spatter飞溅率spatter loss coefficient融合比fusion ratio稀释dilution稀释率rate of dilution合金过度系数transfer efficiency/recovery (of an el ement)坡口groove坡口面groove face坡口面角度angle of bevel (英国)/ bevel angle (美国)坡口角度included angle(英国)/groove angle(美国) 坡口高度groove depth钝边root face钝边高度thickness of root face/width of root face 根部间隙root gap(英国)/root opening (美国)根部半径root radius/groove radius根部锐边root edge卷边高度height of flange卷边半径radius of flange单面坡口single groove双面坡口double groove坡口形式groove typeI形坡口square grooveV形坡口single V grooveY形坡口single V groove with root face双Y形坡口double Vgroove with root face带钝边U形坡口single U groove带钝边双U形坡口double U grooveVY形坡口single compound angle groove带钝边J形坡口single J groove带钝边双J形坡口double J groove单边V形坡口single bevel groove双V形坡口double V groove不对称双V形坡口asymmetric double V groove双单边V形坡口double bevel groove/K groove带垫板V形坡口V groove with backing/ single V g roove with backing喇叭形坡口flare groove锁底坡口single bevel groove with backing locked 坡形板边tapered edge焊缝weld接逢seam焊缝符号welding symbol焊缝金属weld metal填充金属filler metal熔敷金属deposited metal焊缝表面weld face/ face of weld焊缝背面back of weld焊缝轴线axis of weld焊缝尺寸size of weld焊缝宽度weld width/ width of weld焊缝长度weld length/ length of weld焊缝有效长度effective length of weld焊缝厚度throat depth/ throat thickness焊缝计算厚度theoretical throat焊缝实际厚度actual throat熔深penetration/ depth of penetration焊缝成形appearance of weld焊缝成形系数form factor of weld余高reinforcement/ excess weld metal背面余高root reinforcement削平焊缝flush weld/ weld machined flush对接焊缝butt weld角焊缝fillet焊脚leg/ fillet weld leg角焊缝断面形状profile of fillet weld平形角焊缝flat fillet凸形角焊缝convex fillet weld凹形角焊缝concave fillet weld角焊缝凹度concavity侧面角焊缝side fillet weld/ fillet weld in parallel s hear正面角焊缝front fillet weld/ fillet weld in normal s hear立角焊缝fillet weld in the vertical position横角焊缝fillet weld in the horizontal position平角焊缝fillet weld in the flat position斜角焊缝oblique fillet weld连续焊缝continuous weld断续焊缝intermittent weld连续角焊缝continuous fillet weld断续角焊缝intermittent fillet weld交错断续角焊缝staggered intermittent fillet weld 并列断续角焊缝chain intermittent fillet weld端接焊缝edge weld卷边焊缝flanged edge weld塞焊焊缝plug weld纵向焊缝longitudinal weld横向焊缝transverse weld环行焊缝girth weld/ circumferential weld螺旋形焊缝spiral weld/ helical weld密封焊缝seal weld承载焊缝strength weld联系焊缝connective weld定位焊缝tack weld焊道bead/ run/ pass焊波ripple焊根weld root/ root of weld焊趾weld toe/ toe封底焊道sealing run (after making main weld)/ b ack weld打底焊道backing weld (before making main weld) / back weld根部焊道root pass/ root run填充焊道filling bead盖面焊道cosmetic bead/ cover pass回火焊道temper bead/ annealing bead熔透焊道penetration bead焊层layer焊接接头welded joint接头形状joint geometry等强匹配接头equalmatching weld joint低强匹配接头undermatching weld joint 超强匹配接头overmatching weld joint接头根部root of joint对接接头butt jointI形对接接头square butt jointV形对接接头single V butt jointU形对接接头single U butt jointJ形坡口接头single J butt joint双V形对接接头double V butt joint双单边V形对接接头double bevel butt joint/ K groo ve butt joint带钝边U形对接接头double U butt joint带钝边J形坡口接头double J joint角接接头corner jointT形接头T joint斜T形接头inclined T joint十字接头cruciform joint/ cross-shaped joint三联接头joint among three members搭接接头lap joint套管接头muff joint/ sleeve joint双盖板接头double strapped joint盖板接头strapped joint端接接头edge joint卷边接头flanged edge joint锁底对接接头lock butt joint斜对接接头oblique butt joint混合接头mixed joint/ composite joint有间隙接头open joint无间隙接头closed joint焊接电弧welding arc电弧形态arc shape电弧物理行为arc physics behaviour引弧striking arc引弧电压striking voltage电弧气氛arc atmosphere阴极cathode热阴极hot cathode冷阴极cold cathode阴极斑点cathode spot阴极区cathode region阴极区电场强度intensity of the electric field in the cathode region阴极压降cathode drop阳极anode阳极斑点anode spot斑点压力spot pressure阳极区anode region阳极区电场强度intensity of the electric field in the anode region阳极压降anode drop弧柱arc column/ arc stream弧柱压降voltage drop in arc column弧柱电位梯度potential gradient in the arc column 弧焰arc flame弧心arc core硬电弧forceful arc/ hard arc软电弧soft arc旋转电弧rotating arc脉冲电弧pulsed arc脉冲喷射电弧pulsed spray arc起皱现象puckering phenomena起皱电弧puckering arc起皱临界电流puckering critical current间接电弧indirect arc压缩电弧compressive arc磁控电弧magnetic controlling arc电弧力arc force电磁力electromagnectic force电磁收缩效应pinch effect电弧飘移wandering of arc电弧稳定性arc stability电弧静特性static characteristic of arc电弧动特性dynamic characteristic of arc最小电压原理principle of minimum voltage电弧挺度arc stiffness电弧偏吹arc blow磁偏吹magnetic blow阴极清理作用cleaning action of the cathode电弧自身调节arc self-regulation挖掘作用digging action极性效应polarity effect熔滴droplet熔滴比表面积specific surface of droplet熔滴过渡metal transfer过度频率transition frequency粗滴过渡globular transfer; drop transfer短路过渡short circuiting transfer喷射过渡spray transfer旋转喷射过渡rotating spray transfer脉冲喷射过渡pulsed spray transfer爆炸过渡explosive transfer渣壁过渡flux wall guided transfer熔池molten pool沸腾状熔池boiling molten pool弧坑crater熔渣slag渣系slag system渣系相图slag system diagram碱性渣basic slag酸性渣acid slag碱度basicity酸度acidity长渣long slag 短渣short slag粘性熔渣viscous slag氧化物型熔渣oxide melting slag盐型熔渣salt melting slag盐-氧化物型熔渣salt-oxide melting slag熔渣流动性fluidity of the slag; slag fluidity熔渣solidified slag多孔焊渣porous slag玻璃状焊渣vitreous slag自动脱落焊渣self-releasing slag脱渣性slag detachability焊接设备welding equipment; welding set焊机welding machine; welder电焊机electric welding machine; electric welder 焊接电源welding power source焊接热循环weld thermal cycle焊接温度场field of weld temperature; weld tempe rature field准稳定温度场quasi-stationary temperature field焊接热源welding heat source点热源point heat source线热源linear heat source面热源plane heat source瞬时集中热源instantaneous concentration heat so urce热效率thermal efficiency热能集中系数coefficient of heat flow concentratio n峰值温度peak temperature瞬时冷却速度momentary cooling rate冷却时间cooling time置换氧化substitutionary oxydation扩散氧化diffusible oxydation脱氧desoxydation先期脱氧precedent desoxydation扩散脱氧diffusible desoxydation沉淀脱氧precipitation desoxydation扩散氢diffusible hydrogen初始扩散氢initial diffusible hydrogen100℃残余扩散氢diffusible hydrogen remained at 100℃残余氢residual hydrogen去氢dehydrogenation去氢热处理heat treatment for dehydrogenation脱硫desulphurization脱磷dephosphorization渗合金alloying微量合金化microalloying一次结晶组织primary solidification structure二次结晶组织secondary solidification structure联生结晶epitaxial solidification焊缝结晶形态solidification mode in weld-bead结晶层状线ripple多边化边界polygonization boundary结晶平均线速度mean solidification rate针状铁素体acicular ferrite条状铁素体lath ferrite侧板条铁素体ferrite side-plate晶界欣素体grain boundary ferrite; polygonal ferrit e; pro-entectoid ferrite粒状贝氏体granular bainite板条马氏体lath martensite过热组织overheated structure魏氏组织Widmannst?tten structureM-A组元martensite-austenite constituent焊件失效分析failure analysis of weldments冷裂判据criterion of cold cracking冷裂敏感系数cold cracking susceptibity coefficient 脆性温度区间brittle temperature range氢脆hydrogen embrittlement层状偏析lamellar segregation愈合healing effect断口金相fractography断口fracture延性断口ductile fracture韧窝断口dimple fracture脆性断口brittle fracture解理断口cleavage fracture准解理断口quasi-cleavage fracture氢致准解理断口hydrogen-embrittlement induced 沿晶断口intergranular fracture穿晶断口transgranular fracture疲劳断口fatigue fracture滑移面断口glide plane fracture断口形貌fracture apperance断口试验fracture test宏观断口分析macrofractography放射区radical zone纤维区fibrous zone剪切唇区shear lip aone焊接性weldability使用焊接性service weldability工艺焊接性fabrication weldability冶金焊接性metallurgical weldability热焊接性thermal weldability母材base metal; parent metal焊接区weld zone焊态as-welded (AW)母材熔化区fusion zone半熔化区partial melting region未混合区unmixed zone 熔合区bond area熔合线weld junction (英)；bond line (美)热影响区heat-affected zone (HAZ)过热区overheated zone粗晶区coarse grained region细晶区fine grained region过渡区transition zone硬化区hardened zone碳当量carbon equivalent铬当量chromium equivalent镍当量nickel equivalent舍夫勒组织图Schaeffler's diagram德龙组织图Delong’s diagram连续冷却转变图（CCT图）continuous cooling transfo rmation裂纹敏感性cracking sensibility焊接裂纹weld crack焊缝裂纹weld metal crack焊道裂纹bead crack弧坑裂纹crater crack热影响区裂纹heat-affected zone crack纵向裂纹longitudinal crack横向裂纹transverse crack微裂纹micro-crack; micro-fissure热裂纹hot crack凝固裂纹solidification crack晶间裂纹intercrystalline crack穿晶裂纹transcrystalline crack多边化裂纹polygonization crack液化裂纹liquation crack失延裂纹ductility-dip crack冷裂纹cold crack延迟裂纹delayed crack氢致裂纹hydrogen-induced crack焊道下裂纹underbead crack焊根裂纹root crack焊趾裂纹toe crack锯齿形裂纹chevron cracking消除应力处理裂纹stress relief annealing crack (SR crack)再热裂纹reheat crack焊缝晶间腐蚀weld intercryctalline corrosion刀状腐蚀knife line attack敏化区腐蚀weld decay层状撕裂lamellar tearing焊接性试验weldability裂纹试验cracking testIIW裂纹试验IIW cracking testY形坡口裂纹试验slit type cracking test分块形槽热裂纹试验segmented circular groove cra cking testH形裂纹试验H-type cracking test鱼骨形裂纹试验fishbone cracking test指形裂纹试验finger (cracking) testT形裂纹试验Tee type cracking test环形槽裂纹试验circular-groove cracking test可调拘束裂纹试验varestraint testBWRA奥氏体钢裂纹试验BWRA cracking test for au stenitie steel圆棒裂纹试验bar type cracking test; round bar cr acking test里海裂纹试验Lehigh restraint cracking test圆形镶块裂纹试验circular-path cracking test十字接头裂纹试验cruciform cracking testZ向窗口拘束裂纹试验Z-direction window type rest raint cracking testG-BOP焊缝金属裂纹试验G-BOP weld metal crack t est巴特尔焊道下裂纹试验Battelle type underbead crac king testU形拉伸试验U-tension test缪雷克期热裂纹试验Murex hot cracking test菲斯柯裂纹试验FISCO (type) cracking testCTS裂纹试验controlled thermal severity拉伸拘束裂纹试验（TRC试验）tensile restraint cracki ng test刚性拘束裂纹试验（RRC试验）rigid restraint crackin g test插销试验implant testTigamajig 薄板焊接裂纹试验Tigamajing thin plate cracking test焊道纵向弯曲试验longitudinal-bead test柯麦雷尔弯曲试验Kommerell bead bend test肯泽尔弯曲试验Kinzel test缺口弯曲试验notch bend test热朔性试验hot-ductility test热影响区冲击试验impact test of HAZ热影响区模拟试验synthetic heat-affected zone test 最高硬度试验maximum hardness test落锤试验NRL (Naval Research Laboratory)测氢试验Hydrogen test焊接材料电极焊接材料welding consumables电极electrode熔化电极consumable electrode不熔化电极nonconsumable electrode钨电极tungsten electrode焊丝welding wire. Welding rod实心焊丝solid wire渡铜焊丝copper-plating welding wire自保护焊丝self-shielded welding wire 药芯焊丝flux-cored wire复合焊丝combined wire堆焊焊丝surfacing welding rod填充焊丝filler wire焊条electrode/ covered electrode焊芯core wire药皮coating (of an electrode)/ covering (of an el ectrode)涂料coating flux/coating material造气剂gas forming constituents造渣剂slag forming constituents合金剂alloying constituent脱氧剂dioxidizer稳弧剂arc stabilizer粘接剂binder水玻璃water glass水玻璃模数modules of water glass酸性焊条acid electrode高钛型焊条high titania (type) electrode钛钙型焊条lime titania type electrode钛铁矿形焊条ilmenite type electrode氧化铁型焊条iron oxide type electrode/ high iron oxide type electrode高纤维素型焊条high cellulose (type) electrode石墨型焊条graphite type electrode碱性焊条basic electrode/ lime type covered electr ode低氢型焊条low hydrogen type electrode高韧性超低氢焊条high toughness super low hydrog en electrode奥氏体焊条austenitic electrode铁素体焊条ferritic electrode不锈钢焊条stainless steel electrode珠光体耐热钢焊条pearlitic heat resistant steel elect rode低温钢焊条low temperature steel electrode/ steel electrode for low temperature铝合金焊条aluminum alloy arc welding electrode 铜合金焊条copper-alloy arc welding electrode铜芯铸铁焊条cast iron electrode with steel core纯镍铸铁焊条pure nickel cast iron electrode球墨铸铁焊条electrode for welding spheroidal grap hite cast iron铸芯焊条electrode with cast core wire镍基合金焊条nickel base alloy covered electrode 蒙乃尔焊条Monel electrode纯铁焊条pure iron electrode渗铝钢焊条alumetized steel electrode高效率焊条high efficiency electrode铁粉焊条iron powder electrode底层焊条backing welding electrode深熔焊条deep penetration electrode重力焊条gravity electrode立向下焊条electrode for vertical down position we lding节能焊条saving energy electrode水下焊条underwater welding electrode耐海水腐蚀焊条seawater corrosion resistant steel electrode低尘低毒焊条low-fume and harmfulless electrode/ low-fume and low-toxic electrode堆焊焊条surfacing electrode耐磨堆焊焊条hardfacing electrode钴基合金堆焊焊条cobalt base alloy surfacing electr ode碳化钨堆焊焊条tungsten carbide surfacing electrod e高锰钢堆焊焊条high manganese steel surfacing ele ctrode双芯焊条twin electrode绞合焊条stranded electrode编织焊条braided electrode双层药皮焊条double coated electrode管状焊条flux-cored electrode气渣联合保护型药皮semi-volatile covering焊条工艺性usability of the electrode/ technicality of the electrode焊条使用性running characteristics of an electrode/ operating characteristics of an electrode焊条熔化性melting characteristics of an electrode 焊条直径core diameter焊条偏心度eccentricity (of an electrode)药皮重量系数gravity coefficient of coating焊条药皮含水量percentage of moisture for coverin g焊条夹吃持端bare terminal (of an electrode)焊条引弧端striking end (of an elcetrode)焊剂welding flux/ flux熔炼焊剂fused flux粘结焊剂bonded flux烧结焊剂sintered flux/ agglomerated flux窄间隙埋弧焊焊剂flux for narrow-gap submerged a rc welding低氢型焊剂low hydrogen type flux高速焊剂high speed welding flux无氧焊剂oxygen-free flux低毒焊剂low poison flux磁性焊剂magnetic flux电弧焊arc welding直流电弧焊direct current arc welding交流电弧焊alternating current arc welding三相电弧焊three phase arc welding 熔化电弧焊arc welding with consumable金属极电弧焊metal arc welding不熔化极电弧焊arc welding with nonconsumable碳弧焊carbon arc welding明弧焊open arc welding焊条电弧焊shielded metal arc welding (SMAW)重力焊gravity welding躺焊fire cracker welding电弧堆焊arc surfacing自动堆焊automatic surfacing躺板极堆焊surfacing by fire cracker welding带极堆焊surfacing with band-electrode振动电弧堆焊vibratory arc surfacing耐磨堆焊hardfacing埋弧焊submerged arc welding (SAW)多丝埋弧焊multiple wire submerged arc welding纵列多丝埋弧焊Tandem sequence (submerged-arc welding)横列多丝埋弧焊series submerged arc welding (SA W-S)横列双丝并联埋弧焊transverse submerged arc wel ding热丝埋弧焊hot wire submerged-arc welding窄间隙埋弧焊narrow-gap submerged arc welding 弧压反馈电弧焊arc voltage feedback controlling ar c welding自调节电弧焊self-adjusting arc welding适应控制焊接adaptive control welding焊剂层burden; flux layer气体保护电弧焊gas shielded arc welding保护气体protective atmosphere惰性气体inert-gas活性气体active-gas惰性气体保护焊inert-gas (arc) welding氩弧焊argon arc welding熔化极惰性气体保护电弧焊metal inert-gas arc weldi ng钨极惰性气体保护电弧焊tungsten inert-gas arc wel ding钨极氢弧焊argon tungsten arc welding脉冲氢弧焊pulsed argon arc welding熔化极脉冲氢弧焊argon metal pulsed arc welding 钨极脉冲氢弧焊argon tungsten pulsed arc welding 热丝MIG焊hot wire MIG welding热丝TIG焊hot wire TIG welding氨弧焊helium-arc welding活性气体保护电弧焊metal active-gas arc welding混合气体保护电弧焊mixed gas arc welding二氧化碳气体保护电弧焊carbon-dioxide arc welding;CO2 arc welding细丝CO2焊CO2 arc welding with thin wire粗丝CO2焊CO2 arc welding with thick wire磁性焊剂CO2焊unionarc welding药芯焊丝CO2焊arcos arc process; dual shield arc welding气电立焊electrogas (arc) welding氮弧焊nitrogen-arc welding水蒸气保护电弧焊water vapour arc welding原子氢焊atomic hydrogen welding冲器室中电弧焊controlled atmosphere arc welding 旋转电弧焊rotating arc welding短路过渡电弧焊short circuiting arc welding焊丝横摆频率weaving speed of wire焊丝停摆时间electrode keep time of slider等离子弧焊plasma arc welding (PAW)等离子弧plasma arc等离子流plasma jet转移弧transferred arc非转移弧nontransferred arc联合型等离子弧combined plasma arc主弧main arc维弧pilot arc维弧电流pilot arc surrent双弧现象double arcing双弧临界电流critical current of double arcing等离子弧焊枪plasma (welding) torch压缩喷嘴constricting nozzle单孔喷嘴single port nozzle多孔喷嘴multiport nozzle压缩喷嘴孔径orifice diameter孔道长度orifice throat length孔道比orifice throat ratio等离子气plasma gas; orifice gas电极内缩长度electrode setback小孔效应keyhole effect小孔型等离子弧焊keyhole-mode welding熔透型等离子弧焊fusion type plasma arc welding 大电流等离子弧焊high-current plasma arc welding 中电流等离子弧焊intermediate-current plasma arc welding小电流等离子弧焊low-current plasma arc welding 微束等离子弧焊micro-plasma arc welding交流等离子弧焊AC plasma arc welding脉冲等离子弧焊pulsed plasma arc welding等离子弧堆焊plasma arc surfacing热丝等离子弧堆焊hot wire plasma arc surfacing粉末等离子弧堆焊plasma arc powder surfacing等离子-熔化极惰性气体保护电弧焊plasma MIG weldi ng转移弧电源transferred arc power supply 非转移弧电源nontransferred arc power supply电弧焊设备arc welding equipment电弧焊机arc welding machine直流弧焊机DC arc welding machine交流弧焊机AC arc welding machine交直流两用弧焊机AC/DC arc welding machine单站弧焊机single operator arc welding machine多站弧焊机multi-operator arc welding set固定式弧焊机stationary arc welding machine移动式弧焊机portable arc welding machine台式弧焊机bench arc welding machine内燃机驱动式弧焊机combustion engine driven arc welding set电动机驱动式弧焊机motor driven arc welding set 熔化极弧焊机arc welding machine using a consu mable electrode不熔化极弧焊机arc welding machine using a non-consumable electrode脉冲弧焊机pulsed arc welding machine气体保护弧焊机gas shielded arc welding machine 氩弧焊机argon arc welding machine二氧化碳弧焊机CO2 arc welding machine钨极惰性气体保护弧焊机tungsten inert-gas welding machine熔化仍惰性气体保护弧焊机metal inert-gas welding machine气电立焊机electrogas (arc) welding machine等离子弧焊机plasma arc welding machine微束等离子弧焊机micro-plasma welding equipment 原子氢焊机atomic hydrogen welding apparatus埋弧焊机submerged arc welding machine弧焊电源arc welding power source直流弧焊电源DC arc welding power source交流弧焊电源AC arc welding power source交直流两用弧焊电源AC/DC arc welding power sour ce脉冲弧焊电源pulsed arc welding power source上升特性弧焊电源rising characteristic arc welding power source平特性弧焊电源constant –voltage arc welding pow er source下降特性弧焊电源dropping characteristic arc weldi ng power source垂降特性弧焊电源constant-current arc welding po wer source多特性弧焊电源slope-controlled arc welding power source逆变式焊接电源inverter welding power source晶体管弧焊电源transistor arc welding power sourc e电源动特性dynamic characteristic电源外特性external characteristic弧焊变压器arc welding transformer弧焊整流器arc welding rectifier硅弧焊整流器silicon arc welding rectifier晶闸管弧焊整流器SCR arc welding rectifier; arc w elding silicon controlled rectifier脉冲弧焊整流器pulsed arc welding rectifier弧焊发电机arc welding generator焊车welding tractor焊接机头welding head行走机构traveller送丝机构wire feeder等速送丝方式constant wire-feed system变速送丝方式alternate wire-feed system跟踪装置tracer焊丝盘wire reel焊钳electrode holder焊枪welding gun电极夹electrode holder导电嘴tip; contact tube喷嘴nozzle焊剂漏斗flux-hopper高频振荡器oscillator; HF unit脉冲引弧器pulsed arc starter; surge injector脉冲稳弧器pulsed arc stabilizer脉冲激弧器pulsed arc exciter输出电抗器out put reactor镇定变阻器ballast rheostat直流分量抑制器direct current suppressor焊接回路welding circuit额定焊接电流rated welding current焊接电流调节范围range of welding current regulat ion空载电压open circuit voltage(no load voltage)约定负载电压conventional load voltage负载持续率duty cycle额定负载持续率rated duty cycle; standard service 手工弧焊机manual arc welding machine电焊渣electroslag welding (ESW)手工电渣焊manual electroslag welding丝极电渣焊electroslag welding with wire electrod e板极电渣焊electroslag welding with plate electrod e熔嘴电渣焊electroslag welding with consumable n ozzle管极电渣焊electroslag welding with tube electrod e窄间隙电渣焊narrow-gap electroslag welding电渣堆焊electroslag surfacing电渣焊机electrosalg welding machine 熔嘴consumable nozzle; consumable wire钢档板steel shoe (192页)钢冷却板Cu-cooling plate铜滑板copper shoe渣池slag bath渣池深度depth of slag bath渣池电压voltage of slag bath电渣过程稳定性electroslag process stability焊丝间距distance between welding wires电子束焊electron beam welding (EBW)脉冲电子束焊pulsed electron beam welding加速电压acceleration voltage/ operating voltage电子束电流beam current电子束功率beam power电子束功率密度beam power density焦点focal spot焦距focal length工作距离work distance电子束焊机electron beam welding machine高真空电子束焊机full vacuum electron beam welde r低真空电子束焊机partial vacuum electron beam we lder非真空电子束焊机nonvacuum electron beam welder 真空度vacuum电子枪electron gun二极电子枪diode gun三极电子枪triode gun偏压电极bias electrode电磁透镜electromagnetic lens电子束偏转线圈electron beam deflection coils导流系数perveance钉尖spiking激光焊laser welding/ laser beam welding连续激光焊continuous laser welding脉冲激光焊impulsed laser welding激光焊机laser welding equipment气体激光器gas laser固体激光器solid laser焦斑直径focussed diameter of the beam离焦量clearance between focal point and (plate) surface焊缝深宽比weld seam depth-to-width ratio气焊gas welding氧乙炔焊oxy-acetylene welding氢氧焊oxy-hydrogen welding空气乙炔焊air-acetylene welding氧乙炔焊oxy-acetylene flame氢氧焰oxy-hydrogen flame氧煤气焰oxy-coal gas flame焊接火焰welding flame混合比mixing ratio混合气体可燃范围inflammable limit of the gaseous 一次燃烧primary combustion二次燃烧secondary combustion燃烧速度combustion rate燃烧强度combustion intensity火焰热效率flame heating efficiency焰芯inner cone; flame cone内焰internal flame外焰flame envelope中性焰neutral flame氧化焰oxidizing flame碳化焰carburizing flame还原区reducing zone火焰稳定性flame stability回火flashback逆火backfire回烧flashback气体发生速度gasification speed焊炬torch; blow pipe等压式焊炬balanced pressure torch射吸式焊炬injector torch氧乙炔焊炬oxy-acetylene torch焊割两用炬combined cutting and welding torch混合室mixing chamber喷射器injector焊嘴welding nozzle; welding tip液氧气化器oxygen evaporator气瓶gas cylinder乙炔瓶acetylene cylinder阀罩cylinder cap气瓶阀cylinder valve汇流排cylinder manifold减压器pressure regulator; gas regulator单级减压器single stage regulator两级减压器two stage regulator回火防止器flashback arrestor干式回火防止器dry flashback arrestor水封式回火防止器water-closing type arrestor净化器purifier乙炔发生器acetylene generator低压乙炔发生器low pressure acetylene generator 热剂焊thermit welding (TW)热剂补焊thermit repair welding钢轨热剂焊thermit rail welding热剂thermit powder热剂钢水thermit steel热剂反应thermit reaction热剂溶渣thermit slag热剂铸模thermit mold; mold for thermit weld热剂坩埚thermit crucible 焊筋collar水下焊underwater welding水下气体保护电弧焊underwater gas shielded arc w elding水下等离子弧焊underwater plasma arc welding温式水下焊wet method underwater welding干式水下焊dry method underwater welding局部干式水下焊local dry underwater welding水帘局部干式水下焊water curtain type dry underw ater welding遥控水下焊remote controlled underwater welding 电弧空腔arc bubble2006-09-06 | 焊接专业英汉词典（2）电阻焊resistance welding (RW)点焊spot welding; resistance spot welding凸焊projection welding缝焊seam welding滚点焊roll-spot welding连续点焊stitch welding多点焊multiple spot welding手压点焊push welding; poke welding脉冲点焊pulsation spot welding; multiple-impulse welding双面点焊direct spot welding单面点焊indirect spot welding串联点焊series spot welding多点凸焊multiple projection welding频道进缝焊step-by-step seam welding压平缝焊mash seam welding串联缝焊series seam welding对接缝焊butt seam welding; foil-butt seam电阻对焊upset butt welding闪光对焊flash butt welding (FBW)储能焊stored energy welding电容储能点焊condenser discharge spot welding高频电阻焊high frequency resistance welding冲击电阻焊percussion welding胶接点焊spot weld-bonding; weld-bonding闪光flashing; flash过梁bridge; lintel顶锻upsetting; upset夹紧力clamping force顶锻力upsetting force; upset force电极压力electrode force; electrode pressure电极滑移electrode skid焊接循环welding cycle预压时间squeeze time锻压时间forge-delay time; forge time焊接通电时间（电阻焊）welding time (resistance wel。
焊接专业英汉词典1
焊接专业英汉词典（1）usion weldingressure welding程 welding process术 welding technique艺 welding technology/procedure作 welding operation序 welding sequence向 direction of welding置 welding position序 build-up sequence/deposition sequence角 weld slope/inclination of weld axis（焊接网 ）角 weld rotation/angle of rotation置 flat position of welding置 horizontal position of welding置 vertical position of welding置 overhead position of weldingownhand welding/flat position weldingorizontal position weldingertical position weldingverhead position welding焊 all position welding焊 vertical down welding/downward welding in the vertical焊接裂纹 weld crack焊缝裂纹 weld metal crack焊道裂纹 bead crack弧坑裂纹 crater crack热影响区裂纹 heat-affected zone crack纵向裂纹 longitudinal crack横向裂纹 transverse crack微裂纹 micro-crack；micro-fissure热裂纹 hot crack凝固裂纹 solidification crack晶间裂纹 intercrystalline crack穿晶裂纹 transcrystalline crack多边化裂纹 polygonization crack液化裂纹 liquation crack失延裂纹 ductility-dip crack冷裂纹 cold crack延迟裂纹 delayed crack氢致裂纹 hydrogen-induced crack焊道下裂纹 underbead crack焊根裂纹 root crack焊趾裂纹 toe crack锯齿形裂纹 chevron cracking消除应力处理裂纹 stress relief annealing crack (SR crackn焊 vertical up welding/upward welding in the verticalninclined position weldingupward welding in the inclined positiondownward welding in the inclined positionbutt weldingillet weldinglap weldingfillet welding in the downhand position/fillet welding in t positionhorizontal fillet weldingfillet welding in the vertical positionfillet welding in the overhead positiongroove welding口对接焊 square butt welding坡口焊 flare groove weldingflanged edge welding接 welding of longitudinal seam接 welding of transverse seam接 girth welding/ circumferential焊接 welding of spiral seam/welding of helical seam接焊 butt welding of circumferential seamtack welding再热裂纹 reheat crack焊缝晶间腐蚀 weld intercryctalline corrosion刀状腐蚀 knife line attack敏化区腐蚀 weld decay层状撕裂 lamellar tearing焊接性试验 weldability裂纹试验 cracking testIIW裂纹试验 IIW cracking testY形坡口裂纹试验 slit type cracking test分块形槽热裂纹试验 segmented circular groove cracking te H形裂纹试验 H-type cracking test鱼骨形裂纹试验 fishbone cracking test指形裂纹试验 finger (cracking) testT形裂纹试验 Tee type cracking test环形槽裂纹试验 circular-groove cracking test可调拘束裂纹试验 varestraint testBWRA奥氏体钢裂纹试验 BWRA cracking test for austenitie s 圆棒裂纹试验 bar type cracking test；round bar cracking 里海裂纹试验 Lehigh restraint cracking test圆形镶块裂纹试验 circular-path cracking test十字接头裂纹试验 cruciform cracking testZ向窗口拘束裂纹试验 Z-direction window type restraint cr testG-BOP焊缝金属裂纹试验 G-BOP weld metal crack testwelding by one sidewelding by both sidessingle pass welding/single run weldingmulti-pass weldingsingle layer weldingmulti-layer welding层焊 block sequence/ block welding道焊 multi-layer and multi-pass weldingcontinuous weldingintermittent weldingbacking weldback sealing weldcosmetic weldingdeep penetration weldingwelding with weaving/weave bead weldingforeward welding (英国)/ forehand welding (美国) backward welding(英国)/ backhand welding(美国) 焊 backstep weldingkip weldingbalanced welding/ balanced welding sequenceleftward welding forehand weldingrightward welding/backhand weldingwhipping methodautomatic welding 巴特尔焊道下裂纹试验 Battelle type underbead cracking te U形拉伸试验 U-tension test缪雷克期热裂纹试验 Murex hot cracking test菲斯柯裂纹试验 FISCO (type) cracking testCTS裂纹试验 controlled thermal severity拉伸拘束裂纹试验（TRC试验） tensile restraint cracking te 刚性拘束裂纹试验（RRC试验） rigid restraint cracking test 插销试验 implant testTigamajig 薄板焊接裂纹试验 Tigamajing thin plate crackin 焊道纵向弯曲试验 longitudinal-bead test柯麦雷尔弯曲试验 Kommerell bead bend test肯泽尔弯曲试验 Kinzel test缺口弯曲试验 notch bend test热朔性试验 hot-ductility test热影响区冲击试验 impact test of HAZ热影响区模拟试验 synthetic heat-affected zone test最高硬度试验 maximum hardness test落锤试验 NRL (Naval Research Laboratory)测氢试验 Hydrogen test焊接材料、电极焊接材料 welding consumables电极 electrode熔化电极 consumable electrode不熔化电极 nonconsumable electrodemanual welding/hand welding接 shop welding接 site welding(英国)/ field welding (美国) 接 restraint weldingurfacing/building up/overlaying堆焊 buttering边焊 boxing/end returnreweldingepair weldinglug weldinglot weldingwelding with backing焊 welding with flux backing焊 narrow-gap welding形焊 enclosed welding弧焊 pulsed are welding焊 arc spot weldingstud weldinghot gas weldinghigh grade energy welding接 solid-state welding双面成形 one-side welding with back formation 件 welding condition艺参数 welding parameter 钨电极 tungsten electrode焊丝 welding wire. Welding rod实心焊丝 solid wire渡铜焊丝 copper-plating welding wire自保护焊丝 self-shielded welding wire药芯焊丝 flux-cored wire复合焊丝 combined wire堆焊焊丝 surfacing welding rod填充焊丝 filler wire焊条 electrode/ covered electrode焊芯 core wire药皮 coating (of an electrode)/ covering (of an electrod 涂料 coating flux/coating material造气剂 gas forming constituents造渣剂 slag forming constituents合金剂 alloying constituent脱氧剂 dioxidizer稳弧剂 arc stabilizer粘接剂 binder水玻璃 water glass水玻璃模数 modules of water glass酸性焊条 acid electrode高钛型焊条 high titania (type) electrode钛钙型焊条 lime titania type electrodeolaritylectrode negative/straight polaritylectrode positive/reversed polarity式 manipulation of electrode流 welding current流增加时间 welding current upslope time流衰减时间 welding current downslope time度 current density流 short circuit current流 pulse level/pulse current level流幅值 pulse current amplitude流 background level率 pulse frequency接电流占空比 duty cycle of pulse duration压 arc voltage电压 reignition voltage度 welding speed度 rate of travel/travel speed度 wire feed rateheat input/energy inputheat inputreheatostheat处理 posweld heat treatment/postheat treatment 钛铁矿形焊条 ilmenite type electrode氧化铁型焊条 iron oxide type electrode/ high iron oxide electrode高纤维素型焊条 high cellulose (type) electrode石墨型焊条 graphite type electrode碱性焊条 basic electrode/ lime type covered electrode 低氢型焊条 low hydrogen type electrode高韧性超低氢焊条 high toughness super low hydrogen elect 奥氏体焊条 austenitic electrode铁素体焊条 ferritic electrode不锈钢焊条 stainless steel electrode珠光体耐热钢焊条 pearlitic heat resistant steel electrod 低温钢焊条 low temperature steel electrode/ steel electr low temperature铝合金焊条 aluminum alloy arc welding electrode铜合金焊条 copper-alloy arc welding electrode铜芯铸铁焊条 cast iron electrode with steel core纯镍铸铁焊条 pure nickel cast iron electrode球墨铸铁焊条 electrode for welding spheroidal graphite ca 铸芯焊条 electrode with cast core wire镍基合金焊条 nickel base alloy covered electrode蒙乃尔焊条 Monel electrode纯铁焊条 pure iron electrode渗铝钢焊条 alumetized steel electrode度 preheat temperature度 interpass temperature了温度 finishing temperature度 postheating temperature出长度 wire extensionrc length度 melting rate间 melting time数 melting coefficient度 rate of deposition/deposition rate数 deposition coefficient率 deposition efficiency数 loss coefficientatterspatter loss coefficientfusion ratioilutionrate of dilution度系数 transfer efficiency/recovery (of an element) roovegroove face角度 angle of bevel (英国)/ bevel angle (美国)度 included angle(英国)/groove angle(美国)度 groove depth 高效率焊条 high efficiency electrode铁粉焊条 iron powder electrode底层焊条 backing welding electrode深熔焊条 deep penetration electrode重力焊条 gravity electrode立向下焊条 electrode for vertical down position welding 节能焊条 saving energy electrode水下焊条 underwater welding electrode耐海水腐蚀焊条 seawater corrosion resistant steel electr 低尘低毒焊条 low-fume and harmfulless electrode/ low-fum low-toxic electrode堆焊焊条 surfacing electrode耐磨堆焊焊条 hardfacing electrode钴基合金堆焊焊条 cobalt base alloy surfacing electrode 碳化钨堆焊焊条 tungsten carbide surfacing electrode高锰钢堆焊焊条 high manganese steel surfacing electrode 双芯焊条 twin electrode绞合焊条 stranded electrode编织焊条 braided electrode双层药皮焊条 double coated electrode管状焊条 flux-cored electrode气渣联合保护型药皮 semi-volatile covering焊条工艺性 usability of the electrode/ technicality of t electrodeoot face度 thickness of root face/width of root face隙 root gap(英国)/root opening (美国)径 root radius/groove radius边 root edge度 height of flange径 radius of flange口 single groove口 double groove式 groove type口 square groove口 single V groove口 single V groove with root face坡口 double Vgroove with root faceU形坡口 single U groove双U形坡口 double U groove口 single compound angle grooveJ形坡口 single J groove双J形坡口 double J groove形坡口 single bevel groove坡口 double V groove双V形坡口 asymmetric double V grooveV形坡口 double bevel groove/K grooveV形坡口 V groove with backing/ single V groove with backing焊条使用性 running characteristics of an electrode/ oper characteristics of an electrode焊条熔化性 melting characteristics of an electrode焊条直径 core diameter焊条偏心度 eccentricity (of an electrode)药皮重量系数 gravity coefficient of coating焊条药皮含水量 percentage of moisture for covering焊条夹吃持端 bare terminal (of an electrode)焊条引弧端 striking end (of an elcetrode)焊剂 welding flux/ flux熔炼焊剂 fused flux粘结焊剂 bonded flux烧结焊剂 sintered flux/ agglomerated flux窄间隙埋弧焊焊剂 flux for narrow-gap submerged arc weldi 低氢型焊剂 low hydrogen type flux高速焊剂 high speed welding flux无氧焊剂 oxygen-free flux低毒焊剂 low poison flux磁性焊剂 magnetic flux电弧焊 arc welding直流电弧焊 direct current arc welding交流电弧焊 alternating current arc welding三相电弧焊 three phase arc welding熔化电弧焊 arc welding with consumable坡口 flare groove口 single bevel groove with backing locked 边 tapered edgeeldeam号 welding symbol属 weld metal属 filler metal属 deposited metal面 weld face/ face of weld面 back of weld线 axis of weld寸 size of weld度 weld width/ width of weld度 weld length/ length of weld效长度 effective length of weld度 throat depth/ throat thickness算厚度 theoretical throat际厚度 actual throatenetration/ depth of penetration形 appearance of weld形系数 form factor of weldeinforcement/ excess weld metal 金属极电弧焊 metal arc welding不熔化极电弧焊 arc welding with nonconsumable 碳弧焊 carbon arc welding明弧焊 open arc welding焊条电弧焊 shielded metal arc welding (SMAW) 重力焊 gravity welding躺焊 fire cracker welding电弧堆焊 arc surfacing自动堆焊 automatic surfacing躺板极堆焊 surfacing by fire cracker welding 带极堆焊 surfacing with band-electrode振动电弧堆焊 vibratory arc surfacing耐磨堆焊 hardfacing高 root reinforcement缝 flush weld/ weld machined flush缝 butt weldfilleteg/ fillet weld leg断面形状 profile of fillet weld焊缝 flat fillet焊缝 convex fillet weld焊缝 concave fillet weld凹度 concavity焊缝 side fillet weld/ fillet weld in parallel shear 焊缝 front fillet weld/ fillet weld in normal shear 缝 fillet weld in the vertical position缝 fillet weld in the horizontal position缝 fillet weld in the flat position网 ）缝 oblique fillet weld缝 continuous weld缝 intermittent weld焊缝 continuous fillet weld焊缝 intermittent fillet weld续角焊缝 staggered intermittent fillet weld续角焊缝 chain intermittent fillet weld缝 edge weld缝 flanged edge weld缝 plug weld缝 longitudinal weld缝 transverse weld缝 girth weld/ circumferential weld焊缝 spiral weld/ helical weld缝 seal weld缝 strength weld缝 connective weld缝 tack weldead/ run/ passippleeld root/ root of weldeld toe/ toe道 sealing run (after making main weld)/ back weld 道 backing weld (before making main weld)/ back weld 道 root pass/ root run道 filling bead道 cosmetic bead/ cover pass道 temper bead/ annealing bead道 penetration beadayer头 welded joint状 joint geometry配接头 equalmatching weld joint配接头 undermatching weld joint配接头 overmatching weld joint部 root of joint头 butt joint接接头 square butt joint接接头 single V butt joint接接头 single U butt joint口接头 single J butt joint对接接头 double V butt jointV形对接接头 double bevel butt joint/ K groove butt joint U形对接接头 double U butt jointJ形坡口接头 double J joint头 corner joint头 T joint接头 inclined T joint头 cruciform joint/ cross-shaped joint头 joint among three members头 lap joint头 muff joint/ sleeve joint接头 double strapped joint头 strapped joint头 edge joint头 flanged edge joint接接头 lock butt joint接头 oblique butt joint头 mixed joint/ composite joint接头 open joint接头 closed joint弧 welding arc态 arc shape理行为 arc physics behaviourtriking arc压 striking voltage氛 arc atmosphereathodehot cathodecold cathode点 cathode spotcathode region电场强度 intensity of the electric field in the cathode降 cathode dropnode点 anode spot力 spot pressureanode region电场强度 intensity of the electric field in the anode region降 anode droprc column/ arc stream降 voltage drop in arc column位梯度 potential gradient in the arc column rc flamerc coreforceful arc/ hard arcsoft arc弧 rotating arc弧 pulsed arc射电弧 pulsed spray arc象 puckering phenomena弧 puckering arc界电流 puckering critical current弧 indirect arc弧 compressive arc弧 magnetic controlling arcarc forceelectromagnectic force缩效应 pinch effect移 wandering of arc定性 arc stability特性 static characteristic of arc特性 dynamic characteristic of arc压原理 principle of minimum voltage 度 arc stiffness吹 arc blowmagnetic blow理作用 cleaning action of the cathode 身调节 arc self-regulation用 digging action应 polarity effectroplet表面积 specific surface of droplet渡 metal transfer率 transition frequency渡 globular transfer；drop transfer 渡 short circuiting transfer渡 spray transfer射过渡 rotating spray transfer射过渡 pulsed spray transfer渡 explosive transfer渡 flux wall guided transferolten pool熔池 boiling molten poolraterlaglag system图 slag system diagrambasic slagacid slagasicitycidityong slaghort slag渣 viscous slag型熔渣 oxide melting slag渣 salt melting slag物型熔渣 salt-oxide melting slag动性 fluidity of the slag；slag fluidityolidified slag渣 porous slag焊渣 vitreous slag落焊渣 self-releasing slagslag detachability备 welding equipment；welding setelding machine；welderelectric welding machine；electric welder源 welding power source循环 weld thermal cycle度场 field of weld temperature；weld temperature field 温度场 quasi-stationary temperature field源 welding heat sourcepoint heat sourcelinear heat sourceplane heat source中热源 instantaneous concentration heat source thermal efficiency中系数 coefficient of heat flow concentration 度 peak temperature却速度 momentary cooling rate间 cooling time化 substitutionary oxydation化 diffusible oxydationesoxydation氧 precedent desoxydation氧 diffusible desoxydation氧 precipitation desoxydationdiffusible hydrogen散氢 initial diffusible hydrogen余扩散氢diffusible hydrogen remained at 100℃ residual hydrogenehydrogenation处理 heat treatment for dehydrogenation esulphurizationephosphorizationalloying金化 microalloying晶组织 primary solidification structure晶组织 secondary solidification structure晶 epitaxial solidification晶形态 solidification mode in weld-bead状线 ripple边界 polygonization boundary均线速度 mean solidification rate素体 acicular ferrite素体 lath ferrite铁素体 ferrite side-plate素体 grain boundary ferrite；polygonal ferrite；ectoid ferrite氏体 granular bainite氏体 lath martensite织 overheated structure织 Widmannst?tten structure元 martensite-austenite constituent效分析 failure analysis of weldments据 criterion of cold cracking感系数 cold cracking susceptibity coefficient 度区间 brittle temperature rangeydrogen embrittlement析 lamellar segregationealing effect相 fractographyracture口 ductile fracture口 dimple fracture口 brittle fracture口 cleavage fracture断口 quasi-cleavage fracture解理断口 hydrogen-embrittlement induced 口 intergranular fracture口 transgranular fracture口 fatigue fracture断口 glide plane fracture貌 fracture apperance验 fracture test口分析 macrofractographyradical zonefibrous zone区 shear lip aoneweldability接性 service weldability接性 fabrication weldability接性 metallurgical weldability性 thermal weldabilityase metal；parent metalweld zones-welded (AW)化区 fusion zone区 partial melting region区 unmixed zonebond areaweld junction (英)；bond line (美)区 heat-affected zone (HAZ)overheated zonecoarse grained regionfine grained regiontransition zonehardened zonecarbon equivalentchromium equivalentnickel equivalent组织图 Schaeffler's diagram织图Delong’s diagram却转变图（CCT图） continuous cooling transformation 感性 cracking sensibility。
焊接常用词语英汉对照共101页word资料
焊接常用词语英汉对照actual weld-throat thick-ness焊缝厚度all-around weld整周焊缝all-around weld (整周焊缝)环焊缝angle butt weld斜对接焊angle weld角焊appearance of weld焊缝成形arc-seam weld电弧缝焊arc-spot weld电弧点焊arc-weld电弧焊aspect ratio of weld焊缝成形系数at weld edge在焊缝边上attachment weld连接焊缝automatic spot weld自动点焊法automatic weld自动焊接axis of a weld焊缝中心线; 焊接轴线axis of weld焊缝轴线; 焊接轴线back of weld焊缝背面backing groove of weld焊缝反面坡口backing weld底焊; 底焊焊缝bare metal arc weld裸焊条电弧焊bead weld珠焊; 堆焊bead-on-plate weld堆焊焊缝beading weld凸焊beam-to-beam weld梁间焊接; 梁式引线焊接block sequence weld分段多层焊bond weld钢轨接头焊接bridge seam weld桥缝焊接; 桥线焊brize weld硬焊butt weld对接焊缝butt weld ends对头焊接端butt-weld碰焊; 平式焊接; 对头焊接butt-weld in the downhand position对接平焊butt-weld joint对头焊接butt-weld pipe mill对焊管轧机button spot weld按电钮点焊cap weld最后焊层; 盖面焊缝carbon content of weld materials焊接材料的碳含量cast-weld construction铸焊结构caulk weld填缝焊caulking weld密实焊缝chain intermittent fillet weld链式分段角焊; 并列间断角焊缝chain intermittent weld并列焊接circular weld环形焊缝circumferential weld环缝; 环焊缝cleft weld裂口焊closed weld底边无缝焊; 无间隙焊缝closed-chamber fusion weld闭室熔焊cluster weld丛聚焊缝coil weld卷板对接焊; 卷板对接焊; 板卷焊cold weld冷压接commutator-controlled weld换向控制焊接complete penetration butt weld贯穿对焊composite weld紧密焊缝; 强度密封焊缝concave filled weld凹形角焊缝concave filler weld凹角焊concave fillet weld凹面填角焊concave weld凹焊缝; 凹面焊; 凹形焊缝; 轻型焊connective weld联系焊缝continuous butt-weld mill连续式炉焊管机组continuous fillet weld连续(填)角焊缝; 连续角焊缝; 连续贴角焊continuous weld连续焊缝continuous weld process连续式炉焊管法contour weld特形焊接convex fillet weld凸角焊缝; 凸形角焊缝convex weld凸焊缝; 凸形焊缝copper weld wire包铜钢丝corner flange weld单卷边角焊缝corner weld角焊corner-flange weld卷边角焊缝; 卷边角焊缝crack of weld焊部裂纹cross weld十字交叉焊缝; 横向焊缝cross-wire weld十字焊crotch weld楔接锻接; 楔接焊接cup weld带盖板焊缝depth of weld焊接深度dissimilar weld metal不同的焊接金属; 不同金属的焊接distance between the toes of a weld焊缝宽度double groove weld双面坡口焊缝double-bevel groove weld双斜边坡口焊缝; 双斜坡口焊double-flanged butt weld双弯边对接焊缝double-V groove weld双斜边坡口焊缝; 双斜坡口焊downhand weld平焊缝duplex spot weld双点点焊接头edge joint weld边缘焊edge weld端接焊; 端接焊缝; 端面焊缝; 对边焊electric resistance weld mill电阻焊管机electric weld-pipe mill电焊管机electric-weld pipe mill电焊管机emporary weld临时点定焊缝excess weld metal焊缝补强金属; 补强; 补强焊料; 补强金属excess weld metal(焊缝的)余高explosive weld爆炸焊接face of weld焊缝表面; 焊接面fibrous weld纤维状焊缝field weld现场焊接filler weld填角焊缝fillet weld角焊缝; 填角焊; 贴角焊fillet weld in normal shear (搭接接头的)正面角焊缝fillet weld in parallel shear侧面角焊缝; 侧面填角焊fillet weld in the flat position角接平焊; 水平角焊缝fillet weld in the horizontal position横向角焊缝fillet weld size焊角尺寸; 填角焊缝尺寸flame weld火焰焊接flange weld卷边焊缝; 卷边焊缝flange-to-web weld卷边焊缝; 卷边焊缝flanged butt weld弯边对接焊flanged edge weld卷边焊; 卷边焊flash butt weld闪光焊flash weld闪速对焊flat faced fillet weld平顶角焊缝焊接flat fillet weld平角焊ing of fillet weld角焊缝平焊; 船形角焊flush fillet weld平角焊flush weld削平补强的焊缝; 平焊接; 无加强高的焊缝forge weld锻焊焊缝forged weld (焊后锻压的)锻压焊缝form factor of the weld焊缝成形系数formation of weld焊缝成形front fillet weld正侧面填角焊缝; 正面填角焊front(al) fillet weld正面角焊缝full fillet weld满角焊缝; 全角焊full penetration butt weld满对接焊full weld满焊full-fillet weld满角焊full-sized weld全尺寸焊缝full-strength weld (与母材等强)等强焊缝gap weld特殊点焊; 双极单点焊gas-pressure weld气压焊girth weld环形焊缝gravity weld倚焊groove weld坡口焊; 坡口焊缝; 有坡口焊缝; 凹槽焊groove-weld joint有坡口焊接接头hammer weld锻焊hand weld手焊焊缝height of reinforcement of weld加强焊缝高度helical-weld pipe螺旋焊管high performance weld flux高性能焊剂horizontal fillet weld横向角缝焊接horizontal weld横向焊缝horizontal-vertical fillet weld横向垂直角焊缝hot weld encapsulation热焊封袋hydraulic automatic weld液压自动焊接hydraulic weld process液压焊接法inclined weld斜焊inconel weld单面焊缝incorrect weld profile焊缝形状不对incorrect weld size焊缝尺寸不对induction weld mill感应焊管机inside corner weld内角焊接inside fillet weld内角焊接inside weld内焊缝insufficient or excess reinforcement of weld加强焊缝不足或过量intermittent fillet weld间断角缝焊接; 断续角焊缝intermittent weld断续焊; 断续焊缝jam weld对接焊; 对头焊接lap fillet weld搭接角焊缝laser (beam) weld (ing)激光焊lateral weld侧焊; 侧面焊缝leg of a fillet weld角焊缝; 角焊缝焊脚leg of fillet weld圆角焊肉厚length of weld焊缝长度light closing weld轻连续焊接light fillet weld轻型填角焊; 小填角焊light weld轻焊缝Lincoln weld埋弧自动焊longitudinal fillet weld纵向角焊longitudinal weld纵向焊缝longitudinal weld (焊接用语)纵缝loose weld脱焊main weld主焊缝mash seam weld压薄缝焊; 滚压焊mash weld点焊; 点压焊melt thru weld熔透焊缝melt-through weld透溶焊melten weld pool焊接熔池melting through weld熔透焊缝miter weld平顶角焊缝; 斜接角焊缝molten weld metal熔融焊接金属mulitple impulse weld多脉冲焊缝multilayer weld多层焊缝multipass weld多道焊缝multiple arc weld多弧焊缝multiple-electrode submerged arc weld多电极埋弧焊multiple-pass weld多道焊缝; 多路焊接multirun weld多道焊缝nonpressure thermit weld不加压热剂焊缝normal weld正常焊接oblique fillet weld斜交角焊缝; 斜角焊接one-pass weld单层焊缝open butt weld开口对接焊open weld留间隙焊缝; 空隙焊outside weld外焊缝over weld过焊overhead fillet weld仰焊角焊缝overhead weld仰焊oversize weld超尺寸焊缝oxygen weld氧气焊接parallel-arc weld并列弧焊patch weld补焊; 补孔焊缝Peltier's cross weld珀耳帖交叉焊接penetration weld熔透焊缝percussion weld冲击焊缝; 冲击焊接periphera weld环形焊缝pitch of weld焊缝接距; 焊线距plain butt weld无坡口对接焊; 平头对接焊缝plasma-arc weld等离子弧焊接plug weld塞焊焊缝point of weld焊接点point weld点焊poor weld劣质焊缝; 有缺陷的焊缝porous weld多孔焊缝; 疏松焊缝positioned weld平位焊缝; 暂焊post weld annealed (PWA)焊后退火poured weld铸焊焊缝powder weld process粉末焊接法practice weld试验焊缝pressure weld压焊pressure-controlled weld压力控制焊接pressure-tight weld气密焊; 密封焊道principal weld主要焊缝profile of fillet weld填角焊缝轮廓progress of weld焊向projection weld凸焊; 凸焊焊缝projection weld machine凸点电阻焊机pulsating weld脉冲接触焊push weld挤焊quilting weld钉焊reinforced butt weld补强的对接焊缝; 补强式对接焊缝reinforced weld加强焊接reinforcement of weld焊缝加厚; 补强金属; 加强焊缝resistance weld mill电阻焊管机resistance weld pipe电阻焊管resonance butt weld谐振式对接焊restarting a weld再引弧ripple weld鳞状焊缝rivet weld电铆; 电铆焊缝root face of weld焊缝根部钝边root gap of weld焊缝根部间隙root of weld焊缝根部; 焊根root opening of weld焊缝根部间隙root radius of weld焊缝坡口根部半径sagged weld下垂焊缝scarf weld楔口焊接seal weld填焊; 致密焊缝; 密封焊; 密封焊道; 密封焊缝sealing weld封焊seam weld滚焊semi-automatic arc weld半自动电弧焊sequence weld timer序列焊接时间调节器shallow weld浅焊shop weld工厂焊接shot weld点焊shoulder of weld焊缝根部钝边side fillet weld侧面角焊缝; 侧面填角焊缝; 侧面贴角焊side lap weld侧边搭接焊; 弯边搭焊缝side weld侧焊缝; 边焊single lap weld单搭接焊single strap butt weld单面盖板对接焊single-bevel groove weld单斜角槽焊single-fillet weld单边角接焊缝single-pass weld单道焊site weld现场焊接; 安装焊; 安装焊接size of a fillet weld焊角尺寸size of weld焊件的大小; 焊区尺寸skew weld斜焊skin weld表面焊接sleeve weld套筒焊接slip-weld hanger卡瓦焊接套管挂slot weld槽塞焊; 长孔焊; 开槽搭焊缝; 切口焊缝ing slotted weld槽焊slotted lap weld切口搭接焊smooth fillet weld平填角焊缝socket weld ends承插焊接端soft-weld铜镍焊条合金solvent weld溶剂焊接space of intermittent weld断续焊缝间距; 断续焊间距spiral weld螺旋形焊缝spiral weld-pipe mill螺旋焊管机spot weld焊点spot weld bonding胶结点焊spot weld nugget点焊熔核spreading weld宽缝焊接; 加宽的焊缝square butt weld平头对接焊缝square groove weld无坡口槽焊staggered intermittent fillet weld (ing)交错断续角焊staggered intermittent weld交错断续焊缝; 交错间断焊staggered plug weld交错塞焊standard reinforced fillet weld标准加强角焊缝stick-out weld未熔合点焊接头stitch-and-seam weld点线焊straight butt weld无坡口对接接头strapped weld搭板对接焊缝strength weld受载焊缝; 强固焊接; 承载焊缝; 高强度焊接structural weld强固焊缝surface of weld焊缝表面surface weld表面焊缝surface weld metal buildup表面焊缝金属的形成synthetic apparatus for weld thermal cycle焊接热循环模拟装置T weld丁字接头焊缝T-filled weld丁字形角焊T-fillet weld丁字接头角焊缝tack weld定位焊点; 定位焊缝; 临时点焊; 预焊; 平头焊接(welding)定位焊tandem arc weld前后弧焊temporary weld临时点固焊缝tension weld受拉焊缝test weld试焊throat depth (thickness) of fillet weld角焊缝厚度throat of fillet weld凹角焊喉; 填角焊缝喉长throat of weld凹角焊喉tight weld密封焊接; 致密焊缝tight-strong weld密实强固焊缝toe of the weld焊缝边界toe of weld焊趾toe weld趾部焊缝torch weld气焊焊缝total amount of weld fumes焊接发尘量transverse fillet weld横向角焊缝; 正面角焊transverse weld横向焊缝trial weld试验焊接undercut weld底切焊接undressed weld (增加焊缝)未加工焊缝unequal fillet weld焊脚不等的角焊缝unfitness of butt weld焊缝对口错边量union-melt weld埋弧焊unload weld非承载焊缝unspaced butted weld无间隙对接焊缝upgrading of boiler weld锅炉焊缝加强vertical fillet weld立焊角焊缝vertical weld立焊weak weld不强固焊缝weaving weld横向摆动焊缝weld焊; 焊接的; 补焊weld all around围焊weld appearance焊缝外观weld assembly焊接组件weld back-up焊缝背垫weld backing焊缝衬垫weld bead焊缝; 熔敷焊道weld bead height焊缝高度weld beading焊瘤weld bond熔合线weld bridge seam搭桥焊缝; 桥接焊缝weld cap焊帽weld center line焊缝中心线weld collar加强焊缝焊瘤weld crack焊接裂纹weld crater熔池weld crosswise交叉焊接weld decay焊缝腐蚀; 焊接接头晶间腐蚀; 焊接侵蚀; 焊接区晶间腐蚀weld decay (焊接后)敏化区腐蚀weld defect焊接缺陷weld delay time焊接延迟时间weld deposit堆焊weld deposits cleaning焊接熔敷金属清理weld edge焊缝边缘; 焊缝表面边缘weld edgewise沿边焊接weld flange connection焊接法兰连接weld flash焊瘤weld flaw焊接缺陷weld flush焊缝隆起weld fumes焊接烟尘weld gage焊缝检查规; 焊缝卡规weld gauge焊缝量规weld heat input焊接热输入; 焊接线能量weld holder焊接夹持架; 焊接架weld inspection焊缝质量检验; 焊接检查weld interface焊缝界面; 焊接界面weld interval焊接时间weld is accepted焊缝合格weld jig焊接夹具weld joint焊缝weld junction熔焊线; 熔合线weld layer焊接层weld length焊缝长度weld line焊缝线; 焊缝轴线; 焊接线; 焊线weld machined flush削平补强的焊缝weld mark焊缝符号; 焊缝记号; 焊接痕; 熔缝weld mesh crate焊接网格weld metal焊缝金属; 焊接金属weld metal buildup surface金属堆焊表面weld metal composition焊接金属组成weld metal cracking焊缝裂纹weld metal zone焊缝金属区; 焊接金属熔化区weld nugget焊点熔核weld on bottom底焊weld overlap重叠区weld pass焊接通道weld penetration焊缝熔深; 焊透深度weld period焊接时间weld pitch焊缝距weld porosity焊缝气孔weld preheating焊前预热weld preparation焊缝坡口加工weld puddle熔池weld reinforcement焊缝补强; 焊缝加强; 焊接补强weld repairs焊接修补weld ripple焊缝波纹weld root焊件剖口; 焊接根weld root opening gap焊缝根部间隙weld root reinforcement焊缝反面加强weld rotation焊缝转角weld seam pipe焊缝管weld shape焊缝形状weld shielding焊接区保护; 焊接熔池保护weld slope焊缝倾角weld spacing焊点距; 焊缝间距weld strain焊接应变weld strength焊接强度weld surface焊缝表面weld swell焊缝隆起weld thermal cycle焊接热循环weld thickness焊缝厚度weld time焊接时间; 焊接通电时间; 接触焊通电时间weld toxic gases焊接有害气体weld trimmer焊缝清理机weld up焊补weld wheel conditioner焊轮调节器weld width焊缝宽度weld wire包铜钢丝weld zone焊缝区; 焊接区weld-form factor焊缝形状系数weld-fusion line焊缝熔合线weld-in nozzle焊入式喷嘴weld-interval timer焊接间隔记时器weld-shrunk cylinder包扎式圆筒weld-shrunk multilayered cylinder包扎式多层圆筒; 多层包扎式圆筒weld-throat thickness depth焊缝厚度window type restraint weld cracking test窗口拘束焊缝抗裂试验; 窗形拘束抗裂试验zigzag intermittent fillet weld锯齿形断续角焊缝; 锯齿形断续角焊缝zone of weld焊缝表面AC & D. C. arc welding machine交直流弧焊机AC arc welding交流电弧焊AC gas metal-arc welding process交流熔化极气保护焊AC gas tungsten arc welding交流钨极气保护焊AC welding set交流焊机; 交流焊接变压器AC-dc welding machine交直流两用焊机acetylene welding气焊; 乙炔焊; 乙炔焊接acetylene welding torch乙炔焊炬; 乙炔接焊吹管air-acetylene welding空气-乙炔焊接all-position welding全位置焊接alloy steel gas welding rod合金钢气焊条alternating current arc welding交流电弧焊alternating current welding machine交流电焊机aluminium alloy arc welding electrode铝合金焊条aluminothermic welding铝热焊; 铸焊angle backwards welding后倾焊angle butt welding斜口对接焊angle forwards welding前倾焊annealing welding wave退火焊波antogenous welding氧炔焊apparatus for butt welding平接压焊夹具arc braze welding电弧钎焊arc flash welding电弧闪光焊arc spot welding电铆焊arc stud welding柱钉电弧焊; 螺柱电弧焊arc voltage feedback controlling arc welding弧压反馈电弧焊arc welding电弧焊; 电弧焊接; 弧焊arc welding electrode电弧焊条arc welding generator电弧焊接用发电机; 弧焊发电机arc welding generator with independent excitation自激弧焊发电机; 他激电焊发电机arc welding generator with self-excitation自激电焊发电机arc welding machine弧焊机; 电焊机; 电弧焊机arc welding mask电弧焊遮罩arc welding process电弧焊接工艺过程arc welding rectifier弧焊整流器arc welding robot弧焊机器人arc welding set电弧焊机组arc welding transformer弧焊变压器arc-welding electrode电弧焊用焊条arc-welding plant电焊厂arcogen welding电弧氧乙炔焊argon (shielded) arc welding氩弧焊接argon tungsten-arc welding钨极氩弧焊argon-arc welding氩弧焊argonaut welding自动氩弧焊atomic H welding氢原子焊atomic hydrogen welding原子氢焊atomic-hydrogen welding原子氢焊接austenite welding不锈钢焊接autogenous pressure welding自动压合热焊autogenous welding气焊automatic arc welding head自动电弧焊接机头automatic arc welding machine自动电焊机; 自动弧焊机automatic drying line for welding electrode电焊条自动烘焙线automatic slag pool welding自动电渣焊automatic spot welding自动点焊automatic submerged arc welding自动埋弧焊automatic submerged slag welding of rail钢轨automatic submerged-arc welding machine埋弧自动焊机automatic transverse welding横向自动焊automatic welding自动焊; 自动焊接automatic welding head自动焊头automatic welding machine自动焊接机automatic welding of circumferential seams环缝自动焊automatic welding process自动焊接工艺规程automation of welding焊接自动化back hand welding后退焊; 反手焊接back step welding反手焊接back ward welding反手焊接back welding底焊; 退焊法back-step welding分段退焊法backhand welding逆向焊; 右焊法; 后焊法; 向后焊backing welding打底焊backstep welding分段逆焊; 分段退焊; 反向焊; 逐步退焊法; 逆向焊backstep welding sequence分段退焊次序backward welding后倾焊; 后退焊; 向右焊balanced welding对称焊bare welding rod光焊条bare wire arc welding光焊丝电弧焊bead welding窄焊道焊接bench arc welding machine台式弧焊机bevel welding斜角焊blacksmith welding锻工焊接; 锻焊block sequence welding分段多层焊; 分段连续焊接block welding块焊接block welding sequence分段多层焊body welding machine罐身焊接机both sides welding双面焊接brass welding rod黄铜焊条braze welding钎焊; 钎焊接; 钎接; 铜焊braze-welding钎接焊bridge spot welding带接合板点焊; 单面衬垫点焊; 单面搭板点焊bridge welding桥接焊; 盖板焊brize welding硬焊build (built) up welding堆焊build-up welding堆焊building-up by welding堆焊butt resistance welding电阻对焊; 对接电阻焊butt seam welding对接滚焊butt seam welding machine对接缝焊机butt welding对接焊; 平对焊butt welding machine对接焊机butt welding process对接焊法butt-welding对接焊butt-welding machine对焊机capability of welding vertically upwards直上焊接能力capacitor-discharge welding电容放电焊接carbon arc welding碳弧焊; 碳极弧焊carbon in materials for welding焊接用材料中的碳carbon-dioxide arc welding二氧化碳保护焊carriage of automatic welding machine自动焊机走架cascade welding阶梯式焊; 山形多层焊cascade welding sequence串级叠置法cast welding铸焊cement-welding金属陶瓷焊接centralized installation of welding machine多站焊接chain intermittent fillet welding并列断续角焊缝; 链式断续角焊chemical welding化学焊circular seam welding环缝对接焊circular seam-welding machine环形滚焊机cleaning before welding焊接前的清理cleaning of welding deposits焊接沉积的清理closed butt gas pressure welding闭式加压气焊cold welding冷焊; 冷压焊cold-pressure welding冷压焊combined cutting and welding torch焊割两用炬combined cutting and-welding blow-pipe焊割两用炬combined thermit welding加压铸焊complete penetraction and fusion in welding全焊透condenser (discharge) spot-welding machine电容器放电点焊机condenser discharge spot welding电容储能点焊; 电容贮能点焊constant current welding machine恒流电焊机constant energy welding machine恒功率电焊机constant voltage welding machine恒压电焊机constant-current arc welding power source垂降特性弧焊电源constant-current welding source恒流式焊接电源constant-power welding source恒功率式焊接电源constant-pressure pressure welding恒压压力焊constant-temperature pressure welding恒温压力焊constant-voltage welding machine恒电压焊机constant-voltage welding source恒压式焊接电源; 平特性焊接电源consumable electrode welding熔化极电弧焊consumable guide electroslag welding自耗定向电渣焊contact welding接触焊continuous feed welding连续送丝电弧焊continuous welding连续焊; 连续焊接contour welding绕焊controlled arc welding可控电弧焊接controlled atmosohere arc welding充气室电弧焊controlled atmospere arc welding充气式电弧焊controlled tungsten-arc welding自动控制弧长的钨极电弧焊controlled-transfer welding可控过渡电弧焊convex fillet welding凸面角焊缝copper arc welding electrode铜焊条copper welding rod铜焊条copper-alloy arc welding electrode铜合金焊条copper-aluminium welding rod铜铝焊条copper-nickel welding rod铜镍焊条copper-silicon welding rod铜硅焊条copper-tin welding rod铜锡焊条copper-zinc welding rod铜锌焊条core welding-wire焊芯core wire for welding rod焊条芯线corrosion due to welding焊接腐蚀cosmetic welding盖面焊cover chain welding链节式药皮包丝焊接CO 2 arc welding machine二氧化碳弧焊机cracking test for automatic welding自动焊抗裂试验crankshaft flashbutt welding曲轴电阻弧花压焊cross welding横向焊缝cyc-arc welding圆环电弧焊deck welding重力焊deep fillet welding深角焊deep penetration welding深熔焊deep penetration welding electrode深熔焊条deep welding深焊die welding模焊; 冲模堆焊diesel engine driven DC arc welding machine柴油机驱动直流弧焊机differential-excited welding generator差激电焊发电机diffusion welding扩散焊接direct spot welding双面点焊direct welding双面点焊direction of welding焊接方位; 焊接方向discontinuous welding断续焊dot welding点焊double carbon-arc welding间接碳弧焊double side welding双面焊接down-hand welding俯焊downhand welding平焊downward welding in the inclined position下坡焊downward welding in the vertical position向下立焊dual-arc welding双弧焊edge seam welding端面接头滚焊edge welding边缘焊接edgewise welding沿边焊接electric and pressure welding电压力焊接electric arc spot welding电弧点焊electric arc welding generators电弧焊接发电机electric arc welding machine电弧焊机electric butt welding电阻接触焊electric resistance welding电阻焊接; 热电阻焊electric slag welding电渣焊electric spot welding电点焊electric welding电焊electric welding cast copper solder铸铜电焊条electric welding equipment电焊设备electric welding generator电焊发电机electric welding hammer电焊锤electric welding machine电焊机electric welding plant电焊厂electric welding pliers电焊钳electric welding rod电焊条electric welding strip电焊片electric-arc welding电弧焊electric-resistance seam-welding电阻缝焊electric-resistance seam-welding machine电阻缝焊机electrical arc welding电弧焊接electrical resistance welding tube电阻焊接管electrically heated welding torch电热焊枪electro-beam welding电子束焊接electro-gas (enclosed) welding气电立焊electro-slag welding电磁渣焊; 电渣焊electro-slag welding with plate electrode板极电渣焊electro-welding电焊electrode for arc welding电焊条; 电弧焊条electrode for vertical down welding向下立焊条electrode of vertical down welding立向下焊条electrode welding电弧焊electrogas welding气电焊; 电气焊electromagnetic percussive welding电磁冲击焊electromagnetic stored energy welding电磁储能焊electron beam welding电子束焊; 电子束焊接electron beam welding machine电子束焊接机electron-beam welding电子束焊接electron-beam welding machine电子束焊机electron-bombardment welding真空电子束焊electrons leaves welding电子束焊接electropercussive welding电冲击焊; 冲击焊; 储能焊electroslag welding电渣焊; 电阻焊electroslag welding machine电渣焊机electroslag welding with consumable nozzle熔嘴电渣焊electroslag welding with wire electrode丝极电渣焊electrostatic (percussive) welding电能储能焊接electrostatic percussing welding静电焊; 静电焊; 冲击焊; 储能焊electrostatic percussive welding静电冲击焊; 静电冲击焊enclosed welding强制成形焊接energy storage welding贮能焊; 储能焊; 脉冲焊接erecting welding装配焊接erection welding安装焊接eutectic welding低温焊exothermic welding铝热焊expanding or welding of tube with tubesheet管子与管板的胀接或焊接explosive welding (EW)爆炸焊eyelet welding孔焊; 小孔熔焊faster welding快速焊接feed rate of welding wire焊丝送进速度field of welding temperature焊接温度场field welding现场焊接; 工地焊接Filler arc welding菲拉电弧焊距fillet welding (填角焊)贴角焊fillet welding in the downhand position船形角焊fillet welding in the flat position船形焊fillet welding in the horizontal position横角焊fillet welding in the vertical position立角焊fine welding精密焊接fine wire welding细丝焊fire cracker welding躺焊fire welding锻焊; 锻接fixed welding machine固定式焊机fixed-position welding定位焊接flame welding熔气焊flare welding喇叭形坡口焊接flash butt welding闪光对焊; 闪光对接焊wire welding焊网flash welding闪光电弧焊; 闪光焊; 闪焊; 火花电弧焊; 火花对焊flash-butt welding电阻闪光焊接flashover welding闪光焊flat position welding平焊; 顶面平卧焊flat position welding of fillet weld角焊缝平焊; 船形角焊flat welding平卧焊flexible welding rod软焊条flexible wire for electric welding电焊软线flow welding流注焊接; 浇焊fluid welding流焊flux-cored welding包芯焊条焊接fly-wheel type friction welding贮能摩擦焊; 储能摩擦焊flywheel friction welding惯性摩擦焊forehand welding向前焊; 向左焊; 左焊法; 左向焊; 正手焊forge welding锻焊; 锻接焊forward welding正手焊; 左焊法; 左向焊; 前进焊; 前倾焊; 向前焊friction welding摩擦焊; 摩擦焊接friction welding machine摩擦焊接机frontal fillet welding正面角焊full automatic welding全自动焊full-automatic arc welding全自动电弧焊full-fillet welding满角焊full-fusion thermit welding热剂铸焊full-fusion welding全熔合焊full-length welding满焊fusion pressure welding熔化压接fusion thermit welding热剂熔焊; 熔化铝热焊fusion type plasma arc welding熔透型等离子弧焊fusion type welding熔透型焊接法fusion welding熔焊接fusion welding metal熔焊金属gas carbon-arc welding气保护碳弧焊gas electric welding气电联合焊接gas metal arc welding气体保护金属极电弧焊gas metal-arc welding气保护金属极电弧焊gas shield welding气体保护弧焊gas shielded arc welding气体保护电弧焊; 气体保护焊gas shielded arc welding machine气保护弧焊机gas shielded arc-welding machine气体保护弧焊机gas shielded magnetic flux arc welding磁性焊剂气体保护电弧焊gas shielded metal-arc welding气体保护金属弧焊gas shielded welding气体保护焊gas torch welding气炬焊gas tungsten arc welding气体保护钨极电弧焊gas tungsten-arc welding气保护钨极电弧焊gas tungstun arc welding钨极气体保护焊gas welding气焊; 乙炔焊gas welding device气焊设备gas welding equipment气焊设备gas welding machine气焊机gas welding outfit气焊机gas welding rod气焊焊丝gas welding rubber hose气焊橡胶管gas welding technique气焊工艺gas welding torch butt气焊进气硬管gas welding tube mill瓦斯焊接机gas welding work气焊工作gas-arc welding气电焊; 气体保护电弧焊gas-arc welding gun气电焊焊嘴gas-press welding气压焊gas-pressure welding machine气压焊接机gas-shielded stud welding气保护柱钉焊接girth welding环缝横向焊接gravity type arc welding重力焊gravity type welding倚焊gravity welding重力焊; 重力式电弧焊groove welding槽焊; 坡口焊; 开槽焊guided automatic welding导向自动焊接gun welding machine手提式点焊机; 点焊枪hafnium welding wire铪焊丝hammer welding锻焊; 锻接; 锤焊hammered resistance welding锤锻电阻焊; 电阻加热锻焊hand welding holdet手焊焊把hard-welding硬质合金熔焊headless bolt for welding焊接单头螺栓heat-welding adhesive热熔性胶粘剂heated-tool welding热烙铁焊接heavy welding大断面焊接heavy welding electrode粗电焊条heliarc welding氦电弧焊Heliarc welding氦弧焊法helium arc welding氦弧焊HF welding magnetic bar高频焊接磁棒hidden arc welding埋弧焊; 潜弧焊high current arc welding大电流弧焊high frequency AC welding machine高频交流电焊机high frequency dielectric welding高频介电焊high frequency induction welding高频感应焊high frequency welding高频焊接high grade energy welding高能焊high tensile electric welding rod高强焊条high-current plasma arc welding大电流等离子弧焊high-frequency induction welding高频感应焊接; 高频焊接high-frequency resistance welding高频接触焊high-frequency resistance welding (HFRW)高频电阻焊high-frequency welding高频电焊highspeed welding快速焊接horizontal fillet welding横角焊; 水平角焊horizontal position welding水平焊接; 横焊horizontal welding横焊; 水平焊horizontal-position welding水平位置焊接horizontal-rolledposition welding水平转动焊接; 滚动水平焊hot jet welding热风焊接hot press welding热压焊接hot pressure welding预热压力焊hot welding热焊hot wire welding热丝焊hot(-)gas welding热气焊接hot-gas welding热风焊接; 热空气焊接hot-pressure welding热压焊; 热压焊接hydrogen-welding氢焊impact spot welding冲击点焊法impregnated-tape metal-arc welding浸焊条金属弧焊impulse current automatic butt welding machine脉冲电流自动对焊机impulse current seam welding machine脉冲电流缝焊机impulse current semiautomatic butt welding machine脉冲电流半自动对焊机impulse electromagnetic automatic welding machine电磁脉冲自动焊机impulse plasma welding machine脉冲等离子焊机impulse welding脉冲焊; 脉冲焊接impulsed spot welding脉冲点焊inclined position welding倾斜焊indirect (spot) welding单面点焊indirect welding单面点焊induction welding感应焊; 感应焊接; 感应熔焊inert gas arc spot welding惰性气体电弧点焊inert gas arc welding惰性气体电弧焊inert gas spot welding惰性气体保护电弧点焊inert gas welding惰性气体焊接法inert-gas (inert gas) arc welding惰性气体保护焊inertia welding惯性焊接; 贮能摩擦焊; 储能摩擦焊inertial welding惯性焊接infrared welding红外线焊接intermediate current plasma arc welding中电流等离子弧焊intermittent fillet welding断续角焊intermittent point welding断续点焊intermittent welding断续焊International Institute of welding (IIW)国际焊接学会inverted welding仰焊joint welding搭焊jump welding丁字形焊keyhole-mode welding小孔型等离子弧焊; 穿透型焊接法lap fillet welding搭角焊; 搭接角焊lap resistance welding搭接电阻焊lap seam welding搭接缝焊; 搭接焊lap welding搭焊; 搭接焊laser welding激光焊接laser welding chamber激光焊接室laser welding head激光焊接头laser welding machine for orthodontics激光口腔矫形焊接机laser welding system激光焊接系统laser-beam welding machine激光焊接机laser-welding machine激光焊接器lead welding铅焊lefthand welding左焊法leftward welding左向焊法lever gun welding head杠杆式点焊钳light beam welding machine光束焊机light continuous welding轻连续焊接light gauge welding薄板焊接light ray welding光束焊接light welding轻焊接Linde welding林德钢管对焊法line welding直线焊缝焊接liquid metal welding浇注补焊longitudinal resistance seam welding纵向电阻缝焊longitudinal seam welding纵缝焊接; 纵向缝焊longitudinal welding纵缝焊接; 纵向焊接low carbon steel welding electrode低碳钢电焊条low carbon welding wires低碳焊接线材low idle voltage arc-welding power supply低空载电压的弧焊电源low temperature welding低温焊接low-alloy steel covered arc welding electrode低合金钢焊条low-current plasma arc welding小电流等离子弧焊low-hydrogen welding electrode低氢型电焊条low-temperature welding低温焊接lowest permissible temperature for welding焊接允许的最低温度machine for magnetic welding磁力焊接机machine welding机器焊接machine welding torch机械焊接吹管magnetic discharge welding电磁储能焊; 电磁焊magnetic flux arc welding磁性焊剂电弧焊magnetic flux gas shielded arc welding磁性焊剂气体保护电弧焊magnetic force welding machine磁力焊接机magnetic-force welding磁力焊接法manual arc welding手工电弧堆焊manual electic arc pile up welding手工电弧堆焊manual electric arc welding手工电弧堆焊manual electro-slag welding手工电渣焊manual gas welding手工气焊manual metal-arc welding手弧焊manual TIG welding手工钨极惰性气体保护焊manual welding手工焊接; 人工焊接manual welding machine手工焊机manually coating welding electrode手涂焊条mash seam welding滚压电阻缝焊mash stitch welding多针缝式焊接mask welding电焊眼罩match assemble welding装架焊接metal arc welding金属电弧焊metal buried welding埋渣焊metal inert gas arc welding (MIG)惰性气体金属电弧焊metal inert-gas arc welding金属极惰性气体保护焊metal inertia gas welding金属焊条惰性气体保护焊; 熔化极惰性气体保护焊metal rectifier welding set整流焊机metal-arc gas-shielded welding气保护金属极电弧焊metal-arc gas-shielded welding (MAGSW)金属极气保护焊metal-arc welding金属极电弧焊micro resistance welding显微电阻焊micro-gap welding微间隙焊接micro-plasma arc welding微束等离子弧焊micro-welding微型焊接; 显微焊接microgap welding微隙间隙焊Miebach high efficiency flash welding machine米巴赫高效闪光对焊机mild steel arc welding electrode低碳钢焊条mild steel welding rod低碳钢焊丝miter welding斜接头焊接mixed gas arc welding混合气体保护电弧焊molten bath arc welding熔池电弧焊molten-bath arc welding熔池焊motor driven welding machine电动焊机; 电动机拖动式焊机motor-driven welding machine电动旋转式焊机motor-generator welding unit电动直流发电焊接设备multi-head automatic arc-welding machine多头自动电弧焊机multi-head automatic welding machine多头自动焊机multi-operator welding set多站电焊机multi-pass (multiple pass) welding多道焊multiarc welding多弧焊multihead automatic arc welding machine多弧自动电焊机multilayer welding多层焊multioperator welding generator多工位焊接发电机multioperator welding machine多站电焊机; 多站焊机multioperator welding set多站焊机multipass welding多道焊接multiple arc welding多弧焊multiple operator arc welding machine复式弧焊机multiple projection welding多点凸焊multiple resistance welding多点电阻焊接; 复式电阻焊multiple spot welding多点点焊multiple spot welding machine多点点焊机multiple-arc welding plant多弧焊接机multiple-electrode spot welding machine多极点焊机multiple-electrode welding多焊条焊接multiple-impulse welding多脉冲焊; 多脉冲接触焊multiple-operator welding-unit多重操作焊接单元multiple-spot welding多点焊multiple-wire multiple-power submerged-arc welding多丝埋弧焊multiple-wire submerged arc welding多丝埋弧焊multiplewire submerged-arc welding多丝埋弧焊nail head type welding钉头式焊接narrow gap one side welding窄间隙单面焊narrow gap one-side automatic welding窄间隙单面自动电弧焊。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
C(c)
参考试块 reference block
参考照片 Reference Radiographs
参考试片、标准试片 reference piece, reference test piece
测厚仪用分割式直探头:thickness gauge division straight transducers, Partitioned straight beam probe for wall thickness measurement
便携式氢检漏仪 portable hydrogen leak detector
便携式磁通计 portable flux indicator
标准密度校验片 Calibrated Density Reference Scale
标记带 Marking tapes
标准回波探头 standard echo transducers，Standard echo probe
底片评定范围 film evaluation scope
带宽，频带宽度 bandwidth
带通放大器 band amplifier
带通滤波器 band filter, bandpass filter
带保护膜的直探头 straight-beam faced unit(probe)
大气压 barometric pressure
电动机故障检查仪 electromotor fault inspector
电参量测试仪 electricity parameter tester
电动试压装置 electromotion pressure testing device
电缆 cable
电池供电的 battery powered
低频直探头 slow frequency straight transducers，Low frequency straight beam probe
低灵敏度渗透剂 low sensitivity penetrant
底片标志 film marker
底片黑度 photographic density
电离式辐射监测器 ionization-type radiation monitor
电子显微镜 electron microscope
电磁声 electromagnetic-acoustic（EMA）
电流计，检流计 galvanometer
电磁声换能器 electromagnetic-acoustic transducer（EMAT）
棒材 bar stock
棒阳极（X射线）管 rod-anode tube
钡水泥 barium concrete
巴克豪森噪声分析 Barkhausen noise analysis（BNA）
巴克豪森效应 Barkhausen effect
β射线测厚仪 beta thickness gauge
标准试块 standard test block(STB)
标准试片 standard test piece
表面波探头 surface wave transducers, Rayleigh Wave probe
表面（声）波 surface acoustic wave(SAW)
表面张力 surface tension
A(a)
安全灯 safelight
安全防护 safety protection
安全阀 safety valve
安全防护设备 safety equipment
安全措施 safety action, safety practice, safety precaution
A型扫描显示 A-scan display
磁饱和装置 magnetic saturation system
草图、示意图 sketch
Ch(ch)
超声波探伤仪 ultrasonic flaw detector
超声流量计 ultrasonic flow meter
超声标准试块 ultrasonic calibration block
超微粒胶片 extra-fine grain film
超灵敏度渗透系统 supersensitive penetrant system
充电器 charger
充电器连线 charge up line，Charger cable
插座转接板 socket adapter
插头 plug
插座 jack, rosette, socket
磁钢 magnet steel
磁探伤仪 magnetic flaw detector
磁粉探伤用磁悬液 magnetic flaw detection ink, magnetic ink, suspension
磁粉 magnetic particle
磁粉检测 magnetic particle testing（MT）
背景光 back light
背景、本底 background
布氏硬度 ball hardness，Brinell hardness
布氏硬度值 Brinell hardness number（BHN）
布氏硬度计 Brinell hardness tester, Brinell's machine
电磁检测 electromagnetic detection（ED），electromagnetic testing
电磁超声换能器，电磁超声探头 electromagnetic ultrasonic transducer, electromagnetoacoustic probe
电子（显微）探针分析 electron microprobe analysis（EMA）
曝光与暗室附件 Exposure and darkroom accessories
玻璃纤维 fibreglass
玻璃X射线管 glass X-ray tube
玻璃纤维增强塑料 fibreglass reinforced plastics（FRP）
冰醋酸 glacial acetic acid
测厚仪 thickness gauge, thickness meter
测力计，测功器，测功计 dynamometer，ergometer
C型扫描 C-scan
C型扫描显示 C-scan display, C-scope presentation
磁膏 magnetic paste, concentrate, paste
A显示 A-display
按钮式喷雾器 aerosol
暗室 darkroom
B(b)
便携金相检查仪 portable metallographic analyzer, portable metallographic inspection apparatus
便携式光谱分析仪 portable spectroscopic analyzer, portable spectrograph
磁悬液浓度 bath concentration, particle content
磁场指示器 field indicator
磁铁 magnet
磁通计 flux meter, magnet meter, maxwellmeter
磁轭 yoke, magnetic yoke
磁强计，磁场强度计 field intensity set, magnetic field meter, magnetometer
B型扫描显示 B-scan display, B-scope presentation
B型扫描 B-scan
曝光曲线 exposure curve
曝光图表 exposure chart
曝光宽容度 exposure latitude
曝光过度 over exposure,solarization
超声对比试块 ultrasonic reference block
超声相控阵 Ultrasonic phased arrays
超声波测厚仪 ultrasonic thickness gage, ultrasonic thickness gauge
超声测厚探头 ultrasonic thickness gauge transducers, the transducers for ultrasonic thickness gauge
电子拉伸试验机 electron-tensile tester
电子扫描（E-扫描）Electronic scanning (E-scans)
电子线性扫描（E-扫描）Electronic linear scans (E-scans)
电脑轴承分析仪 computer bearing analyzer
半衰期 half life, half-life period, half-time
半值层，半价层 half value layer（HVL）
半值层厚度，半价层厚度 half value thickness（HVT）
丙烯酸树脂 methacrylate resin
白点（钢缺陷）thermal burst
磁致伸缩换能器 magnetostriction transducer, magnetostrictive transducer
磁导率 permeability
磁导率计 permeameter
磁饱和稳压器 saturation core regulator
磁化曲线，B-H曲线 B-H curve