SN75LV4737ADB中文资料
SN74LV174APWR,SN74LV174APWR,SN74LV174ADGVR,SN74LV174ADGVR,SN74LV174ADGVR, 规格书,Datasheet 资料
Addendum-Page 1PACKAGING INFORMATIONOrderable Device Status(1)Package Type PackageDrawingPins Package QtyEco Plan(2)Lead/Ball FinishMSL Peak Temp(3)Samples (Requires Login)SN74LV174AD ACTIVE SOIC D 1640Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174ADE4ACTIVE SOIC D 1640Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174ADG4ACTIVE SOIC D 1640Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174ADGVR ACTIVE TVSOP DGV 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174ADGVRE4ACTIVE TVSOP DGV 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174ADGVRG4ACTIVE TVSOP DGV 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174ADR ACTIVE SOIC D 162500Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174ADRE4ACTIVE SOIC D 162500Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174ADRG4ACTIVE SOIC D 162500Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174ANSR ACTIVE SO NS 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174ANSRE4ACTIVE SO NS 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174ANSRG4ACTIVE SO NS 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174APW ACTIVE TSSOP PW 1690Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174APWE4ACTIVE TSSOP PW 1690Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174APWG4ACTIVE TSSOP PW 1690Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174APWR ACTIVE TSSOP PW 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174APWRE4ACTIVETSSOPPW162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIMContact TI Distributor or Sales Office芯天下--/Addendum-Page 2Orderable Device Status(1)Package Type PackageDrawingPins Package QtyEco Plan(2)Lead/Ball FinishMSL Peak Temp(3)Samples (Requires Login)SN74LV174APWRG4ACTIVE TSSOP PW 162000Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Contact TI Distributor or Sales Office SN74LV174APWT ACTIVE TSSOP PW 16250Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174APWTE4ACTIVE TSSOP PW 16250Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIM Purchase Samples SN74LV174APWTG4ACTIVETSSOPPW16250Green (RoHS & no Sb/Br)CU NIPDAU Level-1-260C-UNLIMPurchase Samples(1)The marketing status values are defined as follows:ACTIVE: Product device recommended for new designs.LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.PREVIEW: Device has been announced but is not in production. Samples may or may not be available.OBSOLETE: TI has discontinued the production of the device.(2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check /productcontent for the latest availability information and additional product content details.TBD: The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)(3)MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.芯天下--/TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74LV174ADGVR TVSOP DGV 162000330.012.4 6.8 4.0 1.68.012.0Q1SN74LV174ADR SOIC D 162500330.016.4 6.510.3 2.18.016.0Q1SN74LV174ANSR SO NS 162000330.016.48.210.5 2.512.016.0Q1SN74LV174APWR TSSOP PW 162000330.012.4 6.9 5.6 1.68.012.0Q1SN74LV174APWTTSSOPPW16250330.012.46.95.61.68.012.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) SN74LV174ADGVR TVSOP DGV162000367.0367.035.0 SN74LV174ADR SOIC D162500333.2345.928.6 SN74LV174ANSR SO NS162000367.0367.038.0 SN74LV174APWR TSSOP PW162000367.0367.035.0SN74LV174APWT TSSOP PW16250367.0367.035.0IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,enhancements,improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B.Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All semiconductor products(also referred to herein as“components”)are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its components to the specifications applicable at the time of sale,in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by applicable law,testing of all parameters of each component is not necessarily performed.TI assumes no liability for applications assistance or the design of Buyers’products.Buyers are responsible for their products and applications using TI components.To minimize the risks associated with Buyers’products and applications,Buyers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any patent right,copyright,mask work right,or other intellectual property right relating to any combination,machine,or process in which TI components or services are rmation published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Buyer acknowledges and agrees that it is solely responsible for compliance with all legal,regulatory and safety-related requirements concerning its products,and any use of TI components in its applications,notwithstanding any applications-related information or support that may be provided by TI.Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures,monitor failures and their consequences,lessen the likelihood of failures that might cause harm and take appropriate remedial actions.Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications.In some cases,TI components may be promoted specifically to facilitate safety-related applications.With such components,TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements.Nonetheless,such components are subject to these terms.No TI components are authorized for use in FDA Class III(or similar life-critical medical equipment)unless authorized officers of the parties have executed a special agreement specifically governing such use.Only those TI components which TI has specifically designated as military grade or“enhanced plastic”are designed and intended for use in military/aerospace applications or environments.Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk,and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI has specifically designated certain components which meet ISO/TS16949requirements,mainly for automotive ponents which have not been so designated are neither designed nor intended for automotive use;and TI will not be responsible for any failure of such components to meet such requirements.Products ApplicationsAudio /audio Automotive and Transportation /automotiveAmplifiers Communications and Telecom /communicationsData Converters Computers and Peripherals /computersDLP®Products Consumer Electronics /consumer-appsDSP Energy and Lighting /energyClocks and Timers /clocks Industrial /industrialInterface Medical /medicalLogic Security /securityPower Mgmt Space,Avionics and Defense /space-avionics-defense Microcontrollers Video and Imaging /videoRFID OMAP Mobile Processors /omap TI E2E Community Wireless Connectivity /wirelessconnectivityMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2012,Texas Instruments Incorporated。
常用电源芯片手册
常用电源芯片第1章DC-DC电源转换器/基准电压源DC-DC电源转换器1.低噪声电荷泵DC-DC电源转换器AAT3113/AAT31142.低功耗开关型DC-DC电源转换器ADP30003.高效3A开关稳压器AP15014.高效率无电感DC-DC电源转换器FAN56605.小功率极性反转电源转换器ICL76606.高效率DC-DC电源转换控制器IRU30377.高性能降压式DC-DC电源转换器ISL64208.单片降压式开关稳压器L49609.大功率开关稳压器L4970A降压式开关稳压器L4971高效率单片开关稳压器L4978高效率升压/降压式DC-DC电源转换器L5970降压式DC-DC电源转换器LM157214.高效率1A降压单片开关稳压器LM1575/LM2575/LM2575HV 降压单片开关稳压器LM2576/LM2576HV16.可调升压开关稳压器LM2577降压开关稳压器LM2596 ,tob_id_492618.高效率5A开关稳压器LM267819.升压式DC-DC电源转换器LM2703/LM270420.电流模式升压式电源转换器LM273321.低噪声升压式电源转换器LM275022.小型75V降压式稳压器LM500723.低功耗升/降压式DC-DC电源转换器LT107324.升压式DC-DC电源转换器LT161525.隔离式开关稳压器LT172526.低功耗升压电荷泵LT175127.大电流高频降压式DC-DC电源转换器LT176528.大电流升压转换器LT193529.高效升压式电荷泵LT193730.高压输入降压式电源转换器LT1956升压式电源转换器LT196132.高压升/降压式电源转换器LT343333.单片3A升压式DC-DC电源转换器LT343634.通用升压式DC-DC电源转换器LT346035.高效率低功耗升压式电源转换器LT3464升压式DC-DC电源转换器LT346737.大电流高效率升压式DC-DC电源转换器LT378238.微型低功耗电源转换器LTC1754单片同步降压式稳压器LTC187540.低噪声高效率降压式电荷泵LTC191141.低噪声电荷泵LTC3200/LTC3200-542.无电感的降压式DC-DC电源转换器LTC325143.双输出/低噪声/降压式电荷泵LTC325244.同步整流/升压式DC-DC电源转换器LTC340145.低功耗同步整流升压式DC-DC电源转换器LTC340246.同步整流降压式DC-DC电源转换器LTC340547.双路同步降压式DC-DC电源转换器LTC340748.高效率同步降压式DC-DC电源转换器LTC341649.微型2A升压式DC-DC电源转换器LTC3426两相电流升压式DC-DC电源转换器LTC342851.单电感升/降压式DC-DC电源转换器LTC344052.大电流升/降压式DC-DC电源转换器LTC3442同步升压式DC-DC电源转换器LTC345854.直流同步降压式DC-DC电源转换器LTC370355.双输出降压式同步DC-DC电源转换控制器LTC373656.降压式同步DC-DC电源转换控制器LTC377057.双2相DC-DC电源同步控制器LTC380258.高性能升压式DC-DC电源转换器MAX1513/MAX151459.精简型升压式DC-DC电源转换器MAX1522/MAX1523/MAX152460.高效率40V升压式DC-DC电源转换器MAX1553/MAX155461.高效率升压式LED电压调节器MAX1561/MAX159962.高效率5路输出DC-DC电源转换器MAX156563.双输出升压式DC-DC电源转换器MAX1582/MAX1582Y64.驱动白光LED的升压式DC-DC电源转换器MAX158365.高效率升压式DC-DC电源转换器MAX1642/MAX1643 降压式开关稳压器MAX1644 67.高效率升压式DC-DC电源转换器MAX1674/MAX1675/MAX167668.高效率双输出DC-DC电源转换器MAX167769.低噪声1A降压式DC-DC电源转换器MAX1684/MAX168570.高效率升压式DC-DC电源转换器MAX169871.高效率双输出降压式DC-DC电源转换器MAX171572.小体积升压式DC-DC电源转换器MAX1722/MAX1723/MAX172473.输出电流为50mA的降压式电荷泵MAX173074.升/降压式电荷泵MAX175975.高效率多路输出DC-DC电源转换器MAX1800同步整流降压式稳压型MAX1830/MAX183177.双输出开关式LCD电源控制器MAX187878.电流模式升压式DC-DC电源转换器MAX189679.具有复位功能的升压式DC-DC电源转换器MAX194780.高效率PWM降压式稳压器MAX1992/MAX199381.大电流输出升压式DC-DC电源转换器MAX61882.低功耗升压或降压式DC-DC电源转换器MAX629升压式DC-DC电源转换器MAX668/MAX66984.大电流PWM降压式开关稳压器MAX724/MAX72685.高效率升压式DC-DC电源转换器MAX756/MAX75786.高效率大电流DC-DC电源转换器MAX761/MAX76287.隔离式DC-DC电源转换器MAX8515/MAX8515A88.高性能24V升压式DC-DC电源转换器MAX872789.升/降压式DC-DC电源转换器MC33063A/MC34063A升压/降压/反向DC-DC电源转换器MC33167/MC3416791.低噪声无电感电荷泵MCP1252/MCP125392.高频脉宽调制降压稳压器MIC2203 93.大功率DC-DC升压电源转换器MIC229594.单片微型高压开关稳压器NCP1030/NCP103195.低功耗升压式DC-DC电源转换器NCP1400A96.高压DC-DC电源转换器NCP140397.单片微功率高频升压式DC-DC电源转换器NCP141098.同步整流PFM步进式DC-DC电源转换器NCP142199.高效率大电流开关电压调器NCP1442/NCP1443/NCP1444/NCP1445100.新型双模式开关稳压器NCP1501101.高效率大电流输出DC-DC电源转换器NCP1550102.同步降压式DC-DC电源转换器NCP1570103.高效率升压式DC-DC电源转换器NCP5008/NCP5009104.大电流高速稳压器RT9173/RT9173A105.高效率升压式DC-DC电源转换器RT9262/RT9262A106.升压式DC-DC电源转换器SP6644/SP6645107.低功耗升压式DC-DC电源转换器SP6691108.新型高效率DC-DC电源转换器TPS54350109.无电感降压式电荷泵TPS6050x110.高效率升压式电源转换器TPS6101x恒流白色LED驱动器TPS61042112.具有LDO输出的升压式DC-DC电源转换器TPS6112x 113.低噪声同步降压式DC-DC电源转换器TPS6200x114.三路高效率大功率DC-DC电源转换器TPS75003115.高效率DC-DC电源转换器UCC39421/UCC39422控制升压式DC-DC电源转换器XC6371117.白光LED驱动专用DC-DC电源转换器XC9116同步整流降压式DC-DC电源转换XC9215/XC9216/XC9217 119.稳压输出电荷泵XC9801/XC9802120.高效率升压式电源转换器ZXLB1600 线性/低压差稳压器121.具有可关断功能的多端稳压器BAXXX122.高压线性稳压器HIP5600123.多路输出稳压器KA7630/KA7631124.三端低压差稳压器LM2937125.可调输出低压差稳压器LM2991126.三端可调稳压器LM117/LM317127.低压降CMOS500mA线性稳压器LP38691/LP38693 128.输入电压从12V到450V的可调线性稳压器LR8非常低压降稳压器（VLDO）LTC3025130.大电流低压差线性稳压器LX8610负输出低压差线性稳压器MAX1735低压差线性稳压器MAX8875133.带开关控制的低压差稳压器MC33375134.带有线性调节器的稳压器MC33998低压差固定及可调正稳压器NCP1117136.低静态电流低压差稳压器NCP562/NCP563137.具有使能控制功能的多端稳压器PQxx138.五端可调稳压器SI-3025B/SI-3157B低压差线性稳压器SPX2975140.五端线性稳压器STR20xx141.五端线性稳压器STR90xx142.具有复位信号输出的双路输出稳压器TDA8133143.具有复位信号输出的双路输出稳压器TDA8138/TDA8138A 144.带线性稳压器的升压式电源转换器TPS6110x145.低功耗50mA低压降线性稳压器TPS760xx146.高输入电压低压差线性稳压器XC6202147.高速低压差线性稳压器XC6204148.高速低压差线性稳压器XC6209F149.双路高速低压差线性稳压器XC6401 基准电压源150.新型XFET基准电压源ADR290/ADR291/ADR292/ADR293 151.低功耗低压差大输出电流基准电压源MAX610x152.低功耗基准电压源MAX6120 精密基准电压源MC1403基准电压源MCP1525/MCP1541155.低功耗精密低压降基准电压源REF30xx/REF31xx156.精密基准电压源TL431/KA431/TLV431A第2章AC-DC转换器及控制器1.厚膜开关电源控制器DP104C2.厚膜开关电源控制器DP308P系列高电压功率转换控制器DPA423/DPA424/DPA425/DPA4264.电流型开关电源控制器FA13842/FA13843/FA13844/FA138455.开关电源控制器FA5310/FA5311 开关电源控制器FAN7556 7.绿色环保的PWM开关电源控制器FAN7601型开关电源控制器FS6M07652R9.开关电源功率转换器FS6Sxx10.降压型单片AC-DC转换器HV-2405E11.新型反激准谐振变换控制器ICE1QS01电源功率转换器KA1M088013.开关电源功率转换器KA2S0680/KA2S088014.电流型开关电源控制器KA38xx型开关电源功率转换器KA5H0165R型开关电源功率转换器KA5Qxx型开关电源功率转换器KA5Sxx18.电流型高速PWM控制器L499019.具有待机功能的PWM初级控制器L599120.低功耗离线式开关电源控制器L6590SWITCH TN系列电源功率转换器LNK304/LNK305/LNK306SWITCH系列电源功率转换器LNK500/LNK501/LNK52023.离线式开关电源控制器M51995A 电源控制器M62281P/M62281FP25.高频率电流模式PWM控制器MAX5021/MAX502226.新型PWM开关电源控制器MC4460427.电流模式开关电源控制器MC4460528.低功耗开关电源控制器MC4460829.具有PFC功能的PWM电源控制器ML482430液晶显示器背光灯电源控制器ML487631.离线式电流模式控制器NCP120032.电流模式脉宽调制控制器NCP120533.准谐振式PWM控制器NCP120734.低成本离线式开关电源控制电路NCP121535.低待机能耗开关电源PWM控制器NCP1230系列自动电压切换控制开关STR8xxxx37.大功率厚膜开关电源功率转换器STR-F665438.大功率厚膜开关电源功率转换器STR-G865639.开关电源功率转换器STR-M6511/STR-M652940.离线式开关电源功率转换器STR-S5703/STR-S5707/STR-S570841.离线式开关电源功率转换器STR-S6401/STR-S6401F/STR-S6411/STR- S6411F42.开关电源功率转换器STR-S6513 43.离线式开关电源功率转换器TC33369～TC3337444.高性能PFC与PWM组合控制集成电路TDA16846/TDA1684745.新型开关电源控制器TDA1685046.“绿色”电源控制器TEA1504 447.第二代“绿色”电源控制器TEA150748.新型低功耗“绿色”电源控制器TEA153349.开关电源控制器TL494/KA7500/MB3759SwitchⅠ系列功率转换器TNY253、TNY254、TNY25SwitchⅡ系列功率转换器TNY264P～TNY268GSwitch（Ⅱ）系列离线式功率转换器TOP209～TOP227Switch-FX系列功率转换器TOP232/TOP233/TOP234Switch-GX系列功率转换器TOP242～TOP25055.开关电源控制器UCX84X56.离线式开关电源功率转换器VIPer12AS/VIPer12ADIP57.新一代高度集成离线式开关电源功率转换器VIPe53 第3章功率因数校正控制/节能灯电源控制器1.电子镇流器专用驱动电路BL83012.零电压开关功率因数控制器FAN48223.功率因数校正控制器FAN75274.高电压型EL背光驱动器HV826场致发光背光驱动器IMP525/IMP5606.高电压型EL背光驱动器/反相器IMP8037.电子镇流器自振荡半桥驱动器IR21568.单片荧光灯镇流器IR21579.调光电子镇流器自振荡半桥驱动器IR215910.卤素灯电子变压器智能控制电路IR216111.具有功率因数校正电路的镇流器电路IR216612.单片荧光灯镇流器IR216713.自适应电子镇流器控制器IR252014.电子镇流器专用控制器KA754115.功率因数校正控制器L656116.过渡模式功率因数校正控制器L656217.集成背景光控制器MAX8709/MAX8709A18.功率因数校正控制器MC33262/MC3426219.固定频率电流模式功率因数校正控制器NCP1653场致发光灯高压驱动器SP440321.功率因数校正控制器TDA4862/TDA486322.有源功率因数校正控制器UC385423.高频自振荡节能灯驱动器电路VK05CFL24.大功率高频自振荡节能灯驱动器电路VK06TL第4章充电控制器1.多功能锂电池线性充电控制器AAT36802.可编程快速电池充电控制器BQ20003.可进行充电速率补偿的锂电池充电管理器BQ20574.锂电池充电管理电路BQ2400x5.单片锂电池线性充电控制器BQ2401x接口单节锂电池充电控制器BQ2402x同步开关模式锂电池充电控制器BQ241008.集成PWM开关控制器的快速充电管理器BQ29549.具有电池电量计量功能的充电控制器DS277010.锂电池充电控制器FAN7563/FAN7564线性锂/锂聚合物电池充电控制器ISL629212.锂电池充电控制器LA5621M/LA5621V通用充电控制器LT1571恒流/恒压电池充电控制器LT176915.线性锂电池充电控制器LTC173216.带热调节功能的1A线性锂电池充电控制器LTC173317.线性锂电池充电控制器LTC173418.新型开关电源充电控制器LTC198019.开关模式锂电池充电控制器LTC4002锂电池充电器LTC400621.多用途恒压/恒流充电控制器LTC4008锂离子/锂聚合物电池充电控制器LTC405223.可由USB端口供电的锂电池充电控制器LTC405324.小型150mA锂电池充电控制器LTC405425.线性锂电池充电控制器LTC405826.单节锂电池线性充电控制器LTC405927.独立线性锂电池充电控制器LTC406128.镍镉/镍氢电池充电控制器M62256FP29.大电流锂/镍镉/镍氢电池充电控制器MAX150130.锂电池线性充电控制器MAX150731.双输入单节锂电池充电控制器MAX1551/MAX155532.单节锂电池充电控制器MAX167933.小体积锂电池充电控制器MAX1736接口单节锂电池充电控制器MAX181135.多节锂电池充电控制器MAX187336.双路输入锂电池充电控制器MAX187437.单节锂电池线性充电控制器MAX189838.低成本/多种电池充电控制器MAX190839.开关模式单节锂电池充电控制器MAX1925/MAX192640.快速镍镉/镍氢充电控制器MAX2003A/MAX200341.可编程快速充电控制器MAX712/MAX71342.开关式锂电池充电控制器MAX74543.多功能低成本充电控制器MAX846A44.具有温度调节功能的单节锂电池充电控制器MAX8600/MAX860145.锂电池充电控制器MCP73826/MCP73827/MCP7382846.高精度恒压/恒流充电器控制器MCP73841/MCP73842/MCP73843/MCP7384447.锂电池充电控制器MCP73861/MCP7386248.单节锂电池充电控制器MIC7905049.单节锂电池充电控制器NCP180050.高精度线性锂电池充电控制器VM7205。
常用稳压管型号
常用稳压型号参数查询DZ是稳压管的电器编号，1N4148就是一个0.6V的稳压管，下面是稳压管上的编号对应的稳压值，有些小的稳压管也会在管体上直接标稳压电压，如5V6就是5.6V的稳压管。
美标稳压二极管型号：HITACHI(日立)：HITACHI(日立)0.5W稳压二极管型号参数稳压HZ3A1 2.5~2.7VHZ3A2 2.6~2.8VHZ3A3 2.6~2.9VHZ3B1 2.8~3.0VHZ3B2 2.9~3.1VHZ3B3 3.0~3.2V线性稳压器件(输入输出电流相等,压降3V以上) 型号稳压(V)最大输出电流可替代型号79L05-5V100mA79L06-6V100mA79L08-8V100mALM78055V1AL7805,LM340T5LM78066V1AL7806LM78088V1AL7808LM78099V1AL7809LM781212V1AL7812,LM340T12LM781515V1AL7815,LM340T15LM781818V1AL7815LM782424V1AL7824LM7905-5V1AL7905LM7906-6V1AL7906,KA7906LM7908-8V1AL7908LM7909-9V1AL7909LM7912-12V1AL7912LM7915-15V1AL7915LM7918-18V1AL7918LM7924-24V1AL792478L055V100mA78L066V100mA78L088V100ma78L099V100ma78L1212V100ma78L1515V100ma78L1818V100ma78L2424V100ma开关稳压器件(电压转换效率高)型号说明最大输出电流LM1575T-3.33.3V简易开关电源稳压器1ALM1575T-5.05V简易开关电源稳压器1ALM1575T-1212V简易开关电源稳压器1ALM1575T-1515V简易开关电源稳压器1ALM1575T-ADJ简易开关电源稳压器(可调1.23V~37V)1A LM1575HVT-3.33.3V简易开关电源稳压器1ALM1575HVT-5.05V简易开关电源稳压器1ALM1575HVT-1212V简易开关电源稳压器1ALM1575HVT-1515V简易开关电源稳压器1ALM1575HVT-ADJ简易开关电源稳压器(可调1.23V~37V)1A LM2575T-3.33.3V简易开关电源稳压器1ALM2575T-5.05V简易开关电源稳压器1ALM2575T-1212V简易开关电源稳压器1ALM2575T-1515V简易开关电源稳压器1ALM2575T-ADJ简易开关电源稳压器(可调1.23V~37V)1A LM2575HVT-3.33.3V简易开关电源稳压器1ALM2575HVT-5.05V简易开关电源稳压器1ALM2575HVT-1212V简易开关电源稳压器1ALM2575HVT-1515V简易开关电源稳压器1ALM2575HVT-ADJ简易开关电源稳压器(可调1.23V~37V)1A LM2576T-3.33.3V简易开关电源稳压器3ALM2576T-5.05.0V简易开关电源稳压器3ALM2576T-1212V简易开关电源稳压器3ALM2576T-1515V简易开关电源稳压器3ALM2576T-ADJ简易开关电源稳压器(可调1.23V~37V)3A LM2576HVT-3.33.3V简易开关电源稳压器3ALM2576HVT-5.05.0V简易开关电源稳压器3ALM2576HVT-1212V简易开关电源稳压器3ALM2576HVT-1515V简易开关电源稳压器3ALM2576HVT-ADJ简易开关电源稳压器(可调1.23V~37V)3A。
FPGA可编程逻辑器件芯片EP4CGX75DF27I7N中文规格书
8.High-Speed Differential I/O Interfacesand DPA in Arria II Devices This chapter describes the high-speed differential I/O features and resources, thefunctionality of the serializer/deserializer (SERDES), and the dynamic phasealignment (DPA) circuitry in Arria® II devices.This chapter contains the following sections:■“LVDS Channels” on page8–2■“LVDS SERDES and DPA Block Diagram” on page8–7■“Differential Transmitter” on page8–8■“Differential Receiver” on page8–11■“Programmable Pre-Emphasis and Programmable V OD.” on page8–10■“Differential I/O Termination” on page8–20■“PLLs” on page8–21■“LVDS and DPA Clock Networks” on page8–21■“Source-Synchronous Timing Budget” on page8–23■“Differential Pin Placement Guidelines” on page8–27■“Setting Up an LVDS Transmitter or Receiver Channel” on page8–36Arria II devices have the following dedicated circuitry for high-speed differential I/O support:■Differential I/O buffer■Transmitter serializer■Receiver deserializer■Data realignment block (bit slip)■DPA block■Synchronizer (FIFO buffer)Arria II devices support the following high-speed differential I/O standards:■LVDS■mini-LVDS■RSDS■LVPECL■Bus LVDS (BLVDS) for Arria II GX devices1True mini-LVDS and RSDS inputs are not supported. The LVPECL I/O standard is only used for phase-locked loop (PLL) clock inputs in differential mode.Chapter 8:High-Speed Differential I/O Interfaces and DPA in Arria II DevicesDifferential TransmitterFigure8–5.Serializer Bypass Path(Note1), (2), (3)Notes to Figure8–5:(1)All disabled blocks and signals are grayed out.(2)In DDR mode, tx_inclock clocks the IOE register. In SDR mode, data is directly passed through the IOE.(3)In SDR and DDR modes, the data width to the IOE is 1 and 2 bits, respectively.(4)Arria II GX center/corner PLL or Arria II GZ left/right PLL.Differential applications often require specific clock-to-data alignments or a specificdata rate to clock rate factors. You can configure any Arria II LVDS transmitter togenerate a source-synchronous transmitter clock output. This flexibility allows theplacement of the output clock near the data outputs to simplify board layout andreduce clock-to-data skew. The output clock can also be divided by a factor of 1, 2, 4, 6,8, or 10, depending on the serialization factor. The phase of the clock in relation to thedata can be set at 0° or 180° (edge or center aligned). The PLLs provide additionalsupport for other phase shifts in 45° increments. These settings are made statically inthe Quartus® II MegaWizard™ Plug-In Manager software.Figure8–6 shows the Arria II LVDS transmitter in clock output mode. In clock outputmode, you can use an LVDS data channel as a clock output channel.Figure8–6.LVDS Transmitter in Clock Output ModeNote to Figure8–6:(1)Arria II GX center/corner PLL or Arria II GZ left/right PLL.Chapter 7:External Memory Interfaces in Arria II DevicesArria II External Memory Interface FeaturesArria II GZ Dynamic On-Chip Termination ControlFigure7–24 shows the dynamic OCT control block. The block includes all the registersrequired to dynamically turn on the on-chip parallel termination (R T OCT) during aread and turn R T OCT off during a write.f For more information about the dynamic OCT control block, refer to the I/O Featuresin Arria II Devices chapter.Figure7–24.Dynamic OCT Control Block for Arria II GZ DevicesNote to Figure7–24:(1)The write clock comes from the PLL.I/O Element RegistersIOE registers are expanded to allow source-synchronous systems to have fasterregister-to-register transfers and resynchronization. For Arria II GX devices, both top,bottom, and right IOEs have the same capability. Right IOEs have extra features tosupport LVDS data transfer. For Arria II GZ devices, both top and bottom, and leftand right IOEs have the same capability. Left and right IOEs have extra features tosupport LVDS data transfer.。
1N4746A(fairchild)中文数据手册「EasyDatasheet」
不重复 峰值反向
当前
IZSM (mA) (Note 2) 344 304 285 250 225
205 190 170 150 135
125 115 110 95 90
80
Notes:
1. Zener Voltage (V ) The zener voltage is measured with the device junction in the thermal equilibrium at the lead temperature (T
100
1
100
1
50
1
10
1
10
1
10
1
10
2
10
3
10
4
10
5
10
6
10
7
10 7.6
5
8.4
5
9.1
不重复 峰值反向
当前
IZSM (mA) (Note 2)
1380 1260 1190 1070 970
890 810 730 660 605
550 500 454 414 380
© 2009 Fairchild Semiconductor Corporation
3
芯片中文手册,看全文,戳
1N4743A 1N4744A 1N4745A 1N4746A 1N4747A
1N4748A 1N4749A 1N4750A 1N4751A 1N4752A
1N4753A 1N4754A 1N4755A 1N4756A 1N4757A
1N4758A
1号线
LOGO LOGO LOGO LOGO LOGO
SN75175中文资料
p
p
Input Voltage – High Logic State (Three–State Control) Input Voltage – Low Logic State (Three–State Control) Input Current – High Logic State (Three–State Control) (VIH = 2.7 V) (VIH = 5.5 V) Input Current – Low Logic State (Three–State Control) (VIL = 0.4 V) Input Clamp Diode Voltage (Three–State Control) (IIK = –18 mA) Output Third State Leakage Current (VI(D) = 3.0 V, VIL = 0.8 V, VO = 0.4 V) (VI(D) = –3.0 V, VIL = 0.8 V, VO = 2.4 V) Output Short–Circuit Current (Note 5) (VI(D) = 3.0 V, VIH = 2.0 V, VO = 0 V) Power Supply Current (VIL = 0 V) (All Inputs Grounded)
QUAD EIA–485 LINE RECEIVER WITH THREE–STATE OUTPUTS
SEMICONDUCTOR TECHNICAL DATA
• • • • • • • • • •
Meets CCITT Recommendations V.10, V.11, X.26, and X.27 Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments 3–State Outputs Common–Mode Input Voltage Range . . . –12 V to 12 V Input Sensitivity . . . ±200 mV Input Hysteresis . . . 50 mV Typ High Input Impedance . . . 1 EIA–485 Unit Load Operates from Single 5.0 V Supply Lower Power Requirements Plug–In Replacement for MC3486
7507路由器的完全配置各项参数(郭斌上传)
cisco RSP8 (R7000) processor with 131072K/8216K bytes of memory.
R7000 CPU at 250Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from power-on
! NVRAM config last updated at 10:48:23 UTC+8 Wed Apr 30 2008
!
version 12.2
no parser cache
no service pad
service timestamps debug datetime
service timestamps log datetime
IOS (tm) RSP Software (RSP-DW-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
Technical Support: /techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
channel-group 0 timeslots 1-31
!
controller E1 1/1/7
channel-group 0 timeslots 1-31
!
!
!
interface Loopback0
description Loopback Address for ISIS Routing,Do not Delete it THANKS
rd 1:231
常用稳压二极管技术参数及老型号代换
常用稳压二极管技术参数及老型号代换型号最大功耗 (mW) 稳定电压(V) 电流(mA) 代换型号国产稳压管日立稳压管HZ4B2 500 3.8 4.0 5 2CW102 2CW21 4B2HZ4C1 500 4.0 4.2 5 2CW102 2CW21 4C1HZ6 500 5.5 5.8 5 2CW103 2CW21A 6B1HZ6A 500 5.2 5.7 5 2CW103 2CW21AHZ6C3 500 6 6.4 5 2CW104 2CW21B 6C3HZ7 500 6.9 7.2 5 2CW105 2CW21CHZ7A 500 6.3 6.9 5 2CW105 2CW21CHZ7B 500 6.7 7.3 5 2CW105 2CW21CHZ9A 500 7.7 8.5 5 2CW106 2CW21DHZ9CTA 500 8.9 9.7 5 2CW107 2CW21EHZ11 500 9.5 11.9 5 2CW109 2CW21GHZ12 500 11.6 14.3 5 2CW111 2CW21HHZ12B 500 12.4 13.4 5 2CW111 2CW21HHZ12B2 500 12.6 13.1 5 2CW111 2CW21H 12B2HZ18Y 500 16.5 18.5 5 2CW113 2CW21JHZ20-1 500 18.86 19.44 2 2CW114 2CW21KHZ27 500 27.2 28.6 2 2CW117 2CW21L 27-3HZT33-02 400 31 33.5 5 2CW119 2CW21MRD2.0E(B) 500 1.88 2.12 20 2CW100 2CW21P 2B1RD2.7E 400 2.5 2.93 20 2CW101 2CW21SRD3.9EL1 500 3.7 4 20 2CW102 2CW21 4B2RD5.6EN1 500 5.2 5.5 20 2CW103 2CW21A 6A1RD5.6EN3 500 5.6 5.9 20 2CW104 2CW21B 6B2RD5.6EL2 500 5.5 5.7 20 2CW103 2CW21A 6B1RD6.2E(B) 500 5.88 6.6 20 2CW104 2CW21BRD7.5E(B) 500 7.0 7.9 20 2CW105 2CW21CRD10EN3 500 9.7 10.0 20 2CW108 2CW21F 11A2RD11E(B) 500 10.1 11.8 15 2CW109 2CW21GRD12E 500 11.74 12.35 10 2CW110 2CW21H 12A1RD12F 1000 11.19 11.77 20 2CW109 2CW21GRD13EN1 500 12 12.7 10 2CW110 2CW21H 12A3RD15EL2 500 13.8 14.6 15 2CW112 2CW21J 12C3RD24E 400 22 25 10 2CW116 2CW21H 24-1RD24F 400 24 28 10 2CW117 2CW21LRD36EL1 500 32 34 15 2CW119 2CW21M 33-2RD57E 500 48 54 10 1DS55-1805Z5.1Y 500 4.94 5.20 2CW103 2CW21A 5C205Z5.6Z 500 5.61 5.91 2CW104 2CW21B 6B205Z6.2Y 500 5.96 6.27 41 2CW104 2CW21B 6C205Z7.5Y 500 7.07 7.45 34 2CW105 2CW21C05Z7.5Z 500 7.3 7.7 34 2CW105 2CW21C 7C205Z9.1Y 500 8.9 9.3 30 2CW107 2CW21E 9C105Z12 500 11.13 12.35 21 2CW110 2CW21H05Z12Z 500 12.0 12.6 20 2CW110 2CW21H 12A305Z13X 500 12.11 12.75 19 2CW110 2CW21H 12A305Z13Z 500 13.5 14.1 18 2CW111 2CW21H 12C205Z13Y 500 12.55 13.21 19 2CW111 2CW21H 12B205Z15 500 14.4 15.0 17 2CW112 2CW21J 15-205Z15Y 500 13.89 14.62 17 2CW111 2CW21H 12C305Z18 500 16.5 18.5 14 2CW113 2CW21J05Z18Y 500 16.82 17.70 14 2CW113 2CW21J 18-1EQA01-11B 500 10.1 11.8 15 2CW109 2CW21GEQA01-12Z 500 11.2 13.1 15 2CW110 2CW21HEQA02-07B 400 6.66 7.01 20 2CW105 2CW21C 7A3EQA02-25A 500 24 25.5 2CW116 2CW21L 24-3TVSQA106SB 500 5.88 6.6 20 2CW104 2CW21BTVSQA111SB 500 10.4 11.6 10 2CW109 2CW21GTVSQA111SE 500 11 11.5 10 2CW109 2CW21G 11C2MA1130 1000 12.4 14.1 5 2CW111 2CW21HMA1330 500 31 35 25 2CW120 2CW21NM4030 500 2.9 3 5 2CW101 2CW21SuPC574JAG 200 31 35 25 2CW120 2CW21NRIMV 135 160 ZDW591N708 0.25 5.6 40 BWA54、2CW28-5.6V1N709 0.25 6.2 40 2CW55/B、BWA55/E1N710 0.25 6.8 36 2CW55A、2CW105-6.8V1N711 0.25 7.5 30 2CW56A、2CW28-7.5V、2CW106-7.5V 1N712 0.25 8.2 30 2CW57/B、2CW106-8.2V1N713 0.25 9.1 27 2CW58A/B、2CW741N714 0.25 10 25 2CW18、2CW59/A/B1N715 0.25 11 20 2CW76、2DW12F.BS31-121N716 0.25 12 20 2CW61/A、2CW77/A1N717 0.25 13 18 2CW62/A、2DW12G1N718 0.25 15 16 2CW112-15V、2CW78/A1N719 0.25 16 15 2CW63/A/B、2DW12H1N720 0.25 18 13 2CW20B、2CW64/B、2CW64-18 1N721 0.25 20 12 2CW65-20、2DW12I、BWA651N722 0.25 22 11 2CW20C、2DW12J1N723 0.25 24 10 WCW116、2DW13A1N724 0.25 27 9 2CW20D、2CW68、BWA68/D1N725 0.40 30 13 2CW119-30V1N726 0.40 33 12 2CW120-33V1N727 0.40 36 11 2CW120-36V1N728 0.40 39 10 2CW121-39V1N748 0.50 3.8～4.0 125 HZ4B21N752 0.50 5.2～5.7 80 HZ6A1N753 0.50 5.8～6.1 80 2CW1321N754 0.5 6.3～6.8 70 H27A1N755 0.50 7.1～7.3 65 HZ7.5EB1N757 0.50 8.9～9.3 52 HZ9C1N962 0.50 9.5～11 45 2CW1371N963 0.50 11～11.5 40 2CW138、HZ12A-21N964 0.50 12～12.5 40 HZ12C-2、MA1130TA1N969 0.50 21～22.5 20 RD245B1N4240A 1 10 100 2CW108-10V、2CW109、2DW5 1N4724A 1 12 76 2DW6A、2CW110-12V1N4728 1 3.3 270 2CW101-3V31N4729 1 3.6 252 2CW101-3V61N4729A 1 3.6 252 2CW101-3V61N4730A 1 3.9 234 2CW102-3V91N4731 1 4.3 217 2CW102-4V31N4731A 1 4.3 217 2CW102-4V31N4732/A 1 4.7 193 2CW102-4V71N4733/A 1 5.1 179 2CW103-5V11N4734/A 1 5.6 162 2CW103-5V61N4735/A 1 6.2 146 1W6V2、2CW104-6V21N4736/A 1 6.8 138 1W6V8、2CW104-6V81N4737/A 1 7.5 121 1W7V5、2CW105-7V51N4738/A 1 8.2 110 1W8V2、2CW106-8V21N4739/A 1 9.1 100 1W9V1、2CW107-9V11N4740/A 1 10 91 2CW286-10V、B563-101N4741/A 1 11 83 2CW109-11V、2DW61N4742/A 1 12 76 2CW110-12V、2DW6A1N4743/A 1 13 69 2CW111-13V、2DW6B、BWC114D 1N4744/A 1 15 57 2CW112-15V、2DW6D1N4745/A 1 16 51 2CW112-16V、2DW6E1N4746/A 1 18 50 2CW113-18V、1W18V1N4747/A 1 20 45 2CW114-20V、BWC115E1N4748/A 1 22 41 2CW115-22V、1W22V1N4749/A 1 24 38 2CW116-24V、1W24V1N4750/A 1 27 34 2CW117-27V、1W27V1N4751/A 1 30 30 2CW118-30V、1W30V、2DW19F 1N4752/A 1 33 27 2CW119-33V、1W33V1N4753 0.5 36 13 2CW120-36V、1/2W36V1N4754 0.5 39 12 2CW121-39V、1/2W39V1N4755 0.5 43 12 2CW122-43V、1/2W43V1N4756 0.5 47 10 2CW122-47V、1/2W47V1N4757 0.5 51 9 2CW123-51V、1/2W51V1N4758 0.5 56 8 2CW124-56V、1/2W56V1N4759 0.5 62 8 2CW124-62V、1/2W62V1N4760 0.5 68 7 2CW125-68V、1/2W68V1N4761 0.5 75 6.7 2CW126-75V、1/2W75V1N4762 0.5 82 6 2CW126-82V、1/2W82V1N4763 0.5 91 5.6 2CW127-91V、1/2W91V1N4764 0.5 100 5 2CW128-100V、1/2W100V1N5226/A 0.5 3.3 138 2CW51-3V3、2CW52261N5227/A/B 0.5 3.6 126 2CW51-3V6、2CW52271N5228/A/B 0.5 3.9 115 2CW52-3V9、2CW52281N5229/A/B 0.5 4.3 106 2CW52-4V3、2CW52291N5230/A/B 0.5 4.7 97 2CW53-4V7、2CW52301N5231/A/B 0.5 5.1 89 2CW53-5V1、2CW52311N5232/A/B 0.5 5.6 81 2CW103-5.6、2CW52321N5233/A/B 0.5 6 76 2CW104-6V、2CW52331N5234/A/B 0.5 6.2 73 2CW104-6.2V、2CW52341N5235/A/B 0.5 6.8 67 2CW105-6.8V、2CW5235型号稳压值(V) 稳定电流 (MA) 功率(mW) 型号稳压值(V) 稳定电流 (MA) 功率(mW) MA1030 3 5 400 MA2180 18 20 1000MA1033 3.3 5 400 MA2200 20 20 1000MA1036 3.6 5 400 MA2220 22 10 1000MA1039 3.9 5 400 MA2240 24 10 1000MA1043 4.3 5 400 MA2270 27 5 1000MA1047 4.7 5 400 MA2300 30 5 1000MA1051 5.1 5 400 MA2330 33 5 1000MA1056 5.6 5 400 MA2360 36 5 1000MA1062 6.2 5 400 MA3047 4.7 5 150MA1068 6.8 5 400 MA3051 5.1 5 150MA1075 7.5 5 400 MA3056 5.6 5 150MA1082 8.2 5 400 MA3062 6.2 5 150MA1091 9.1 5 400 MA3082 8.2 5 150MA1100 10 5 400 MA3091 9.1 5 150MA1110 11 5 400 MA3100 10 5 150MA1114 11.4 10 400 MA3110 11 5 150MA1120 12 5 400 MA3120 12 5 150MA1130 13 5 400 MA3130 13 5 150MA1140 14 5 400 MA3150 15 5 150MA1150 15 5 400 MA3160 16 5 150MA1160 16 5 400 MA3180 18 5 150MA1180 18 5 400 MA3200 20 5 150MA1200 20 5 400 MA3220 22 5 150MA1220 22 5 400 MA3240 24 5 150MA1240 24 5 400 MA3270 27 2 150MA1270 27 2 400 MA3300 30 2 150MA1300 30 2 400 MA3330 33 2 150MA1330 33 2 400 MA3360 36 2 150MA1360 36 2 400 MA4030 3 5 370MA2051 5.1 40 1000 MA4033 3.3 5 370MA2056 5.6 40 1000 MA4036 3.6 5 370MA2062 6.2 40 1000 MA4039 3.9 5 370 MA2068 6.8 40 1000 MA4043 4.3 5 370 MA2075 7.5 40 1000 MA4047 4.7 5 370 MA2082 8.2 40 1000 MA4051 5.1 5 370 MA2091 9.1 40 1000 MA4056 5.6 5 370 MA2100 10 40 1000 MA4062 6.2 5 370 MA2110 11 5 1000 MA4068 6.8 5 370MA2120 12 5 1000 MA4075 7.5 5 370MA2130 13 5 1000 MA4082 8.2 5 370MA2150 15 5 1000 MA4091 9.1 5 370MA2160 16 5 1000 MA4100 10 5 370MA4110 11 5 370 BZX55C6V8 6.8 5 500 MA4120 12 5 370 BZX55C7V5 7.5 5 500 MA4130 13 5 370 BZX55C8V2 8.2 5 500 MA4140 14 5 370 BZX55C9V1 9.1 5 500 MA4150 15 5 370 BZX55C10 10 5 500MA4160 16 5 370 BZX55C11 11 5 500MA4180 18 5 370 BZX55C12 12 5 500MA4200 20 5 370 BZX55C13 13 5 500MA4220 22 5 370 BZX55C15 15 5 500MA4240 24 5 370 BZX55C16 16 5 500MA4270 27 2 370 BZX55C18 18 5 500MA4300 30 2 370 BZX55C20 20 5 500MA4330 33 2 370 BZX55C22 22 5 500MA4360 36 2 370 BZX55C24 24 5 500MA5047 4.7 5 500 BZX55C27 27 5 500 MA5051 5.1 5 500 BZX55C30 30 5 500 MA5056 5.6 5 500 BZX55C33 33 5 500 MA5062 6.2 5 500 BZX55C36 36 5 500 MA5068 6.8 5 500 BZX55C39 39 5 500 MA5075 7.5 5 500 BZX55C43 43 2.5 500 MA5082 8.2 5 500 BZX55C47 47 2.5 500 MA5091 9.1 5 500 BZX55C51 51 2.5 500 MA5100 10 5 500 BZX55C56 56 2.5 500 MA5110 11 5 500 BZX55C62 62 2.5 500 MA5120 12 5 500 BZX85C2V7 2.7 80 1300 MA5130 13 5 500 BZX85C3V0 3.0 80 1300MA5160 16 5 500 BZX85C3V6 3.6 70 1300MA5180 18 5 500 BZX85C3V9 3.9 60 1300MA5200 20 5 500 BZX85C4V3 4.3 50 1300MA5240 24 5 500 BZX85C4V7 4.7 45 1300 BZX55C2V4 2.4 5 500 BZX85C5V1 5.1 45 1300 BZX55C2V7 2.7 5 500 BZX85C5V6 5.6 45 1300 BZX55C3V0 3.0 5 500 BZX85C6V2 6.2 35 1300 BZX55C3V3 3.3 5 500 BZX85C6V8 6.8 35 1300 BZX55C3V6 3.6 5 500 BZX85C7V5 7.5 35 1300 BZX55C3V9 3.9 5 500 BZX85C8V2 8.2 25 1300BZX55C4V3 4.3 5 500 BZX85C9V1 9.1 25 1300 BZX55C4V7 4.7 5 500 BZX85C10 10 25 1300 BZX55C5V1 5.1 5 500 BZX85C11 11 20 1300 BZX55C5V6 5.6 5 500 BZX85C12 12 20 1300 BZX55C6V2 6.2 5 500 BZX85C13 13 20 1300 BZX85C15 15 15 1300 BZX79A9V1 9.1 5 400 BZX85C16 16 15 1300 BZX79A10 10 5 400 BZX85C18 18 15 1300 BZX79A11 11 5 400 BZX85C20 20 10 1300 BZX79A12 12 5 400 BZX85C22 22 10 1300 BZX79A13 13 5 400 BZX85C24 24 10 1300 BZX79A15 15 5 400 BZX85C27 27 8 1300 BZX79A16 16 5 400BZX85C30 30 8 1300 BZX79A18 18 5 400BZX85C33 33 8 1300 BZX79A20 20 5 400BZX85C36 36 8 1300 BZX79A22 22 5 400BZX85C39 39 6 1300 BZX79A24 24 5 400BZX85C43 43 6 1300 BZX79A27 27 2 400BZX85C47 47 4 1300 BZX79A30 30 2 400BZX85C51 51 4 1300 BZX79A33 33 2 400BZX85C56 56 4 1300 BZX79A36 36 2 400BZX85C62 62 4 1300 BZX79A39 39 2 400BZX55C68 68 2.5 500 BZX79A43 43 2 400 BZX55C75 75 2.5 500 BZX79A47 47 2 400 BZX55C82 82 2.5 500 BZX79A51 51 2 400 BZX55C91 91 1 500 BZX79A56 56 2 400BZX55C110 110 1 500 BZX79A68 68 2 400BZX55C120 120 1 500 BZX79A75 75 2 400BZX55C130 130 1 500 BZX79C2V4 2.4 5 500BZX55C150 150 1 500 BZX79C2V7 2.7 5 500BZX55C160 160 1 500 BZX79C3V0 3.0 5 500BZX55C180 180 1 500 BZX79C3V3 3.3 5 500BZX55C200 200 1 500 BZX79C3V6 3.6 5 500BZX79A2V4 2.4 5 400 BZX79C3V9 3.9 5 500BZX79A2V7 2.7 5 400 BZX79C4V3 4.3 5 500BZX79A3V0 3.0 5 400 BZX79C4V7 4.7 5 500BZX79A3V3 3.3 5 400 BZX79C5V1 5.1 5 500BZX79A3V6 3.6 5 400 BZX79C5V6 5.6 5 500BZX79A3V9 3.9 5 400 BZX79C6V2 6.2 5 500BZX79A4V3 4.3 5 400 BZX79C6V8 6.8 5 500BZX79A4V7 4.7 5 400 BZX79C7V5 7.5 5 500BZX79A5V1 5.1 5 400 BZX79C8V2 8.2 5 500BZX79A5V6 5.6 5 400 BZX79C9V1 9.1 5 500BZX79A6V2 6.2 5 400 BZX79C10 10 5 500BZX79A6V8 6.8 5 400 BZX79C11 11 5 500BZX79A7V5 7.5 5 400 BZX79C12 12 5 500BZX79A8V2 8.2 5 400 BZX79C13 13 5 500整流二极管：整流二极管是面接触型的，多采用硅材料构成。
SN75LVDS86A中文资料
元器件交易网IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1999, Texas Instruments Incorporated。
SN75ALS1177中文资料
IMPORTANT NOTICETexas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current.TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”).TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local SC sales office.In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used.Copyright © 1996, Texas Instruments Incorporated。
SN74LS75N中文资料
Copyright © 1988, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.1POST OFFICE BOX 655303 • DALLAS, TEXAS 752652POST OFFICE BOX 655303 • DALLAS, TEXAS 752653 POST OFFICE BOX 655303 • DALLAS, TEXAS 752654POST OFFICE BOX 655303 • DALLAS, TEXAS 752655 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265元器件交易网IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1999, Texas Instruments Incorporated。
SN74LVTH32373ZKER,SN74LVTH32373ZKER,SN74LVTH32373GKER,SN74LVTH32373GKER, 规格书,Datasheet 资料
FEATURESGKE OR ZKE PACKAGE(TOP VIEW)123456ABCDEFGHJKLMNPRTDESCRIPTION/ORDERING INFORMATIONSN74LVTH323733.3-V ABT32-BIT TRANSPARENT D-TYPE LATCHWITH3-STATE OUTPUTSSCBS751B–OCTOBER2000–REVISED DECEMBER2006•Member of Texas Instruments Widebus+™•Bus Hold on Data Inputs Eliminates the Need Family for External Pullup/Pulldown Resistors •State-of-the-Art Advanced BiCMOS•Supports Unregulated Battery Operation Technology(ABT)Design for3.3-V Operation Down to2.7Vand Low Static-Power Dissipation•Latch-Up Performance Exceeds500mA Per •Typical V OLP(Output Ground Bounce)<0.8V JESD17at VCC=3.3V,TA=25°C•ESD Protection Exceeds JESD22•I off and Power-Up3-State Support Hot–2000-V Human-Body Model(A114-A) Insertion–200-V Machine Model(A115-A)•Supports Mixed-Mode Signal Operation(5-V–1000-V Charged-Device Model(C101)Input/Output Voltage With3.3-V VCC)TERMINAL ASSIGNMENTS123456A1Q21Q11OE1LE1D11D2B1Q41Q3GND GND1D31D4C1Q61Q51V CC1V CC1D51D6D1Q81Q7GND GND1D71D8E2Q22Q1GND GND2D12D2F2Q42Q31V CC1V CC2D32D4G2Q62Q5GND GND2D52D6H2Q72Q82OE2LE2D82D7J3Q23Q13OE3LE3D13D2K3Q43Q3GND GND3D33D4L3Q63Q52V CC2V CC3D53D6M3Q83Q7GND GND3D73D8N4Q24Q1GND GND4D14D2P4Q44Q32V CC2V CC4D34D4R4Q64Q5GND GND4D54D6T4Q74Q84OE4LE4D84D7The SN74LVTH32373is a32-bit transparent D-type latch designed for low-voltage(3.3-V)V CC operation,but with the capability to provide a TTL interface to a5-V system environment.This device is particularly suitable for implementing buffer registers,I/O ports,bidirectional bus drivers,and working registers.This device can be used as four8-bit latches,two16-bit latches,or one32-bit latch.When the latch-enable(LE) input is high,the Q outputs follow the data(D)inputs.When LE is taken low,the Q outputs are latched at the levels set up at the D inputs.A buffered output-enable(OE)input can be used to place the eight outputs in either a normal logic state(high or low logic levels)or the high-impedance state.In the high-impedance state,the outputs neither load nor drive the bus lines significantly.The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.Please be aware that an important notice concerning availability,standard warranty,and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.Widebus+is a trademark of Texas Instruments.PRODUCTION DATA information is current as of publication date.Copyright©2000–2006,Texas Instruments Incorporated Products conform to specifications per the terms of the TexasInstruments standard warranty.Production processing does notnecessarily include testing of all parameters.DESCRIPTION/ORDERING INFORMATION (CONTINUED)SN74LVTH323733.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTSSCBS751B–OCTOBER 2000–REVISED DECEMBER 2006OE does not affect internal operations of the latch.Old data can be retained or new data can be entered while the outputs are in the high-impedance state.Inputs can be driven from either 3.3-V or 5-V devices.This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment.When V CC is between 0and 1.5V,the device is in the high-impedance state during power up or power down.However,to ensure the high-impedance state above 1.5V,OE should be tied to V CC through a pullup resistor;the minimum value of the resistor is determined by the current-sinking capability of the driver.This device is fully specified for hot-insertion applications using I off and power-up 3-state.The I off circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down.The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,which prevents driver conflict.Active bus-hold circuitry holds unused or undriven inputs at a valid logic e of pullup or pulldown resistors with the bus-hold circuitry is not recommended.ORDERING INFORMATIONT APACKAGE (1)ORDERABLE PART NUMBER TOP-SIDE MARKING LFBGA –GKESN74LVTH32273GKER –40°C to 85°C Reel of 1000HV373LFBGA –ZKE (Pb-free)SN74LVTH32273ZKER(1)Package drawings,standard packing quantities,thermal data,symbolization,and PCB design guidelines are available at /sc/package.FUNCTION TABLE (EACH 8-BIT LATCH)INPUTSOUTPUTQOE LE D L H H H L H L L L L X Q 0HXXZ2Submit Documentation Feedback1OE 1LE1D1To Seven Other Channels1Q12OE 2LE2D1To Seven Other Channels2Q13OE 3LE3D1To Seven Other Channels 3Q14OE 4LE4D1To Seven Other Channels4Q1Absolute Maximum Ratings (1)SN74LVTH323733.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCHWITH 3-STATE OUTPUTSSCBS751B–OCTOBER 2000–REVISED DECEMBER 2006LOGIC DIAGRAM (POSITIVE LOGIC)over operating free-air temperature range (unless otherwise noted)MINMAX UNITV CC Supply voltage range –0.5 4.6V I Input voltage range (2)–0.57V V O Voltage range applied to any output in the high-impedance or power-off state (2)–0.57V O Voltage range applied to any output in the high state (2)–0.5V CC +0.5I O Current into any output in the low state 128I O Current into any output in the high state (3)64mA I IK Input clamp current V I <0–50I OK Output clamp currentV O <0–50θJA Package thermal impedance (4)GKE/ZKE package40°C/W T stg Storage temperature range–65150°C (1)Stresses beyond those listed under "absolute maximum ratings"may cause permanent damage to the device.These are stress ratings only,and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions"is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2)The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.(3)This current flows only when the output is in the high state and V O >V CC .(4)The package thermal impedance is calculated in accordance with JESD 51-7.3Submit Documentation FeedbackRecommended Operating Conditions (1)SN74LVTH323733.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTSSCBS751B–OCTOBER 2000–REVISED DECEMBER 2006MINMAX UNIT V CC Supply voltage 2.7 3.6V V IH High-level input voltage 2V V IL Low-level input voltage 0.8V V I Input voltage5.5V I OH High-level output current –32mA I OL Low-level output current 64mA ∆t/∆v Input transition rise or fall rate Outputs enabled10ns/V ∆t/∆V CC Power-up ramp rate200µs/V T A Operating free-air temperature–4085°C(1)All unused inputs of the device must be held at V CC or GND to ensure proper device operation.Refer to the TI application report,Implications of Slow or Floating CMOS Inputs ,literature number SCBA004.4Submit Documentation FeedbackElectrical Characteristics Timing RequirementsSN74LVTH32373 3.3-V ABT32-BIT TRANSPARENT D-TYPE LATCHWITH3-STATE OUTPUTSSCBS751B–OCTOBER2000–REVISED DECEMBER2006over recommended operating free-air temperature range(unless otherwise noted)PARAMETER TEST CONDITIONS MIN TYP(1)MAX UNITV IK V CC=2.7V,I I=–18mA–1.2V CC=2.7V to3.6V,I OH=–100µA V CC–0.2VV OH V CC=2.7V,I OH=–8mA 2.4V CC=3V,I OH=–32mA2I OL=100µA0.2V CC=2.7VI OL=24mA0.5V OL I OL=16mA0.4VV CC=3V I OL=32mA0.5I OL=64mA0.55V CC=0or3.6V,V I=5.5V10Control inputs V CC=3.6V,V I=V CC or GND±1I IµAV I=V CC1 Data inputs V CC=3.6VV I=0–5I off V CC=0,V I or V O=0to4.5V±100µAV I=0.8V75V CC=3VDataI I(hold)V I=2V–75µAinputsV CC=3.6V,(2)V I=0to3.6V±500I OZH V CC=3.6V,V O=3V5µAI OZL V CC=3.6V,V O=0.5V–5µAI OZPU V CC=0to1.5V,V O=0.5V to3V,OE=don't care±100µAI OZPD V CC=1.5V to0,V O=0.5V to3V,OE=don't care±100µAOutputs high0.38V CC=3.6V,I O=0,I CC Outputs low10mAV I=V CC or GNDOutputs disabled0.38V CC=3V to3.6V,One input at V CC–0.6V,∆I CC(2)0.2mAOther inputs at V CC or GNDCi V I=3V or04pFC o V O=3V or09pF(1)All typical values are at V CC=3.3V,T A=25°C.(2)This is the increase in supply current for each input that is at the specified TTL voltage level,rather than V CC or GND.over recommended operating free-air temperature range(unless otherwise noted)(see Figure1)V CC=3.3VV CC=2.7V±0.3V UNITMIN MAX MIN MAXt w Pulse duration,LE high33nst su Setup time,data before LE↓10.6nst h Hold time,data after LE↓1 1.1ns5Submit Documentation FeedbackSwitching CharacteristicsSN74LVTH323733.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTSSCBS751B–OCTOBER 2000–REVISED DECEMBER 2006over recommended operating free-air temperature range,C L =50pF (unless otherwise noted)(see Figure 1)SN74LVTH16541FROM TO V CC =3.3V PARAMETERV CC =2.7V UNIT(INPUT)(OUTPUT)±0.3VMINTYP (1)MAX MINMAX t PLH 1.5 2.7 3.8 4.2D Q ns t PHL 1.5 2.5 3.64t PLH 2.13 4.3 4.8LE Q ns t PHL 2.1 2.944t PZH 1.5 2.8 4.3 5.1OE Q ns t PZL 1.5 2.8 4.3 4.7t PHZ 2.4 3.55 5.4OEQns t PLZ 23.24.7 4.8t sk(LH)0.5ns t sk(HL)0.5(1)All typical values are at V CC =3.3V,T A =25°C.6Submit Documentation FeedbackPARAMETER MEASUREMENT INFORMATIONFrom Output Under TestC LLOAD CIRCUITOpen Data Input Timing Input2.7 V0 V2.7 V0 V2.7 V0 VInputVOLTAGE WAVEFORMS SETUP AND HOLD TIMESVOLTAGE WAVEFORMS PROPAGATION DELAY TIMESINVERTING AND NONINVERTING OUTPUTSVOLTAGE WAVEFORMSPULSE DURATIONV OHV OHV OLV OL2.7 V0 V InputOutput Control Output Waveform 1S1 at 6 V (see Note B)Output Waveform 2S1 at GND (see Note B)V OLV OH 3 V0 V≈0 V2.7 VVOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLINGOutputOutputt PLH /t PHL t PLZ /t PZL t PHZ /t PZHOpen 6 V GNDTEST S1NOTES: A.C L includes probe and jig capacitance.B.Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.C.All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z O = 50 Ω, t r ≤ 2.5 ns, t f ≤ 2.5 ns.D.The outputs are measured one at a time, with one transition per measurement.SN74LVTH323733.3-V ABT 32-BIT TRANSPARENT D-TYPE LATCHWITH 3-STATE OUTPUTSSCBS751B–OCTOBER 2000–REVISED DECEMBER 2006Figure 1.Load Circuit and Voltage Waveforms7Submit Documentation FeedbackPACKAGING INFORMATIONOrderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)SN74LVTH32373GKER NRND LFBGA GKE 961000TBDSNPB Level-2-235C-1YEAR SN74LVTH32373ZKERACTIVELFBGAZKE961000Green (RoHS &no Sb/Br)SNAGCULevel-3-260C-168HR(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers andother limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.OTHER QUALIFIED VERSIONS OF SN74LVTH32373:•Enhanced Product:SN74LVTH32373-EPNOTE:Qualified Version Definitions:•Enhanced Product -Supports Defense,Aerospace and Medical ApplicationsPACKAGE OPTION ADDENDUM13-Oct-2008TAPE AND REEL INFORMATION*All dimensions are nominalDevicePackage Type Package Drawing Pins SPQReel Diameter (mm)Reel Width W1(mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74LVTH32373GKER LFBGA GKE 961000330.024.4 5.713.7 2.08.024.0Q1SN74LVTH32373ZKERLFBGAZKE961000330.024.45.713.72.08.024.0Q1*All dimensions are nominalDevice Package Type Package Drawing Pins SPQ Length(mm)Width(mm)Height(mm) SN74LVTH32373GKER LFBGA GKE961000333.2345.931.8SN74LVTH32373ZKER LFBGA ZKE961000333.2345.931.8IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAudio /audio Communications and Telecom /communicationsAmplifiers Computers and Peripherals /computersData Converters Consumer Electronics /consumer-appsDLP®Products Energy and Lighting /energyDSP Industrial /industrialClocks and Timers /clocks Medical /medicalInterface Security /securityLogic Space,Avionics and Defense /space-avionics-defense Power Mgmt Transportation and /automotiveAutomotiveMicrocontrollers Video and Imaging /videoRFID Wireless /wireless-appsRF/IF and ZigBee®Solutions /lprfTI E2E Community Home Page Mailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2011,Texas Instruments Incorporated。
BD4737中文资料
BD47XXG seriesHigh-accuracyLow current consumption BD47XXG is a series of RESET ICs developed to prevent system error at transient state when the power of CPU and logic circuit switches ON/OFF or shutdown. These ICs consist of Power, GND, and reset output to detect power supply voltage of various systems and to output reset signal. These ICs are more practical for portable products because of their ultra-small package and low current consumption.Description1) Detection voltage: 0.1V step line up 1.9~4.6V(Typ.)2) High-accuracy voltage detection Vs ±2%(Max.)3) Low current consumption4) "L" reset output of open collector 5) Small SMP5 package FeaturesPortable products, Equipments with CPU and logic circuit ApplicationsSeries characteristicsGeneral-purposeRESET ICAbsolute Maximum Ratings(Ta=25˚C)Application Circuit*2 TPHL : Vcc=(Vs typ.+0.4V)Æ(Vs typ.–0.4V)Electrical characteristics Timing waveform Transfer delay time measurement circuitVCCVOUTVS0V VS+VCCNote) The ratings shown above indicate breakdown limit of the pin and should not be regarded as the values that guarantee the operation.* Derating : 1.5mW/˚C for operation above Ta=25˚CCharacteristic diagram and Measurement circuit (When BD4729G is measured.)I c c (µA )Vcc (V)Current consumptionOperating limit voltage'L' output currentI/O characteristicNCV o u t (V )Vcc (V)V o u t (m V )Vcc (V)V o u t (m V )Iol (mA)Setting of the RESET signal delay timeDelay time can be set by capacitor C L and resistance R L connected to the output pin as shown below.CL is charged by R L when Vcc is rising. The delay time caused by charging is determined by thetime constant of C L, R L and the threshold voltage of RESET pin. RESET IC discharges C L forcedly when Vcc is falling. The delay time of RESET signal is determined by adding the delay time of single RESET IC to each time.VCCRESET(=VOUT)VS0VVOLVS+Marking Voltage Part No.Part No.Part No.Marking MarkingVoltage VoltageBD4719BABBBCBDBEBFBGBHB3BJ1.9V2.0V2.1V2.2V2.3V2.4V2.5V2.6V2.7V2.8VBKBLBMBNB4BPBQBRBSBT2.9V3.0V3.1V3.2V3.3V3.4V3.5V3.6V3.7V3.8VBUBVBWBXBYBZB1B23.9V4.0V4.1V4.2V4.3V4.4V4.5V4.6VBD4729BD4720BD4721BD4722BD4723BD4724BD4725BD4726BD4727BD4728BD4730BD4731BD4732BD4733BD4734BD4735BD4736BD4737BD4738BD4739BD4740BD4741BD4742BD4743BD4744BD4745BD4746 Part number and Marking of samplesAppendixAbout Export Control Order in JapanProducts described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade ControlOrder in Japan.In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.Appendix1-Rev1.0。
SN75172中文资料
元器件交易网IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1998, Texas Instruments Incorporated。
浔星金牛 Cheetah 73LP 安装指南说明书
Cheetah 73LP Installation GuideModel ST373405LW/LC/LWV/LCV, ST336605LC/LCVSCSI interface disc drivePublication Number: 100109946, Rev. A, April 2001Handling precautions/Electrostatic discharge protection •Disc drives are fragile. Do not drop or jar the drive and handle the drive only by the edges or frame.•Drive electronics are extremely sensitive to static electricity. Keep the drive in its antistatic container until you are ready to install it. Wear a wrist strap and cable connected to ground. Discharge static from all items near or that will contact the drive. Never use an ohmmeter on any circuit boards.•T urn off the power to the host system during installation.•Always use forced-air ventilation when operating the drive.•Use caution when troubleshooting a unit that has voltages present.•Do not disassemble the drive; doing so voids the warranty.•Return the entire drive for depot service if any part is defective.•Do not apply pressure or attach labels to circuit board or drive top.Electromagnetic complianceSee Safety and Regulatory Agency Specifications, p/n 75789512.Drive characteristicsST373405ST336605 Formatted capacity (Gbytes)73.4 36.7Max. data blocks 143,374,74171,687,371(088BB995h)(0445DCCBh) Cylinders (user accessible)29,54929,549Heads (user accessible)84Disc rotation (rpm)10,04110,041 Operating voltages+5V+12V+5V+12VTypical operating current (Amps)0.820.910.820.82What you need•Phillips screwdriver and four 6-32 UNC drive mounting screws•Forced-air ventilation to provide adequate drive cooling•An unused drive power connector from your system’s power supply (not applicable to LC/LCV models because power is supplied through the interface connector on these units)T o operate at LVD transfer rates, you may also need an LVD-capable SCSI host adapter, LVD I/O cable and active negation external terminator. Multimode interfaceThis drive can operate in single-ended (SE) or low voltage differential (LVD) mode. This multimode capability provides backwards compatibility so you can use it with or without an LVD-capable host adapter. The primary bene-fits of LVD technology include faster transfer rates, reduced power con-sumption, increased allowable cable lengths, and improved device connectivity.Y ou can configure the drive to switch between SE and LVD modes automat-ically or force it to operate in SE mode only. To configure this option, see Figure 2.Note.T o operate at the Ultra2 rates in LVD mode, all devices on the same bus (cable) must be running in LVD mode. If you add any SE device to the bus, all devices on that bus operate in SE mode.Note.Some LVD host adapters provide an LVD connector and an SE con-nector on the same host adapter to allow you to run SE and LVD drives concurrently at their maximum capabilities. Check your SCSI host adapter documentation. See Figure 3.Caution.Do not mix LVD drives on the same bus with high voltage differen-tial (HVD) devices–drive damage may occur.Installation instructions1.Set the SCSI IDDetermine which SCSI IDs are already being used in the system and then assign this disc drive a SCSI ID that isn’t already being used. Use the J6 connector located on the front of the drive to set the SCSI ID (see Figure 1). •Most ST373405 drives are factory set with the SCSI ID set at 0. If this is the only SCSI drive in your system and there are no other SCSI deviceson the daisychain, you can leave this drive’s SCSI ID set to 0 and pro-ceed to the next step.•The host system’s SCSI controller usually uses SCSI ID 7.•If you have an LC or LCV model drive, the host normally sets the ID over the I/O interface, so you don’t need to worry about this step.•Some systems provide a cable designed to connect to the J5 jumper block on the drive to remotely set the ID. Y ou can connect this cable to J5Figure 1.Setting the SCSI ID (the J5 block is on LW/LWV models only)2.Configure terminationIf you are installing the drive in a system that has other SCSI devices installed, terminate only the end devices on the SCSI bus (cable). This drive does not have internal terminators or any other way of adding internal termi-nation on the drive. Y ou must provide external termination when termination is required. This is normally done by adding an inline terminator on the end of the cable. See Figure 3 for an illustration showing a system configuration that uses an external terminator.•Use active (ANSI SCSI-2 Alternative 2) single-ended terminators when terminating a bus operating in single-ended mode.•Use SPI-2-compliant active low voltage differential terminators when ter-minating a SCSI Ultra2 bus operating in LVD mode.•The host adapter is normally on the end of the bus and internally termi-nated. Y ou can configure your bus with another device on the end if you remove termination from the host adapter.3.Configure terminator powerTerminators have to get power from some source. The default configuration results in the drive not supplying termination power to the bus. Y ou should normally leave this drive set at this default unless your host system requires the drive to supply termination power to the bus. To configure this drive to supply termination power to the bus, place a jumper on J2 pins 1 and 2 as shown in Figure 2.•Host systems designed to use LC and LCV drives normally provide termi-nation power from the host adapter or other source. For this reason, LC and LCV model drives cannot be configured to provide termination power to the bus.Figure 2.Option select jumpers4.Connect the drive activity LED (optional)Connect the Drive Activity LED cable to J6 pins 11 and 12 (see Figure 2), or connect a drive ID and Drive Activity LED cable to J5, depending on host system requirements.5.Check the other available jumper settingsSelect other options on J2 as illustrated in Figure 2. Do not change these unless instructed to do so by the host system documentation.6.Mount the drive in the host system and connect cablesNote.LC and LCV drives are designed to be attached to a carrier or tray and inserted into the host system without I/O or power cables.a.Mount LW and LWV model drives to the host system’s chassis usingfour 6-32 UNC screws. Two mounting holes are in each side of the drive and there are four mounting holes in the bottom of the drive. Do not over-tighten or force the screws. Y ou can mount the drive in any orienta-tion.b.Connect the SCSI I/O cable into the drive’s SCSI connector. Take carenot to stretch or crimp this cable, and do not block the system’s cooling air flow with the cable.Note.For Ultra2 and faster operation, special twisted pair LVD cables are required.c.Connect the DC power cable to the drive. See Figure 3.Figure 3.Cable connections and external termination7.Format the driveThe drive has been low level formatted at the factory. Y ou do not need to perform another low level format on this drive unless you decide to perform certain diagnostics through the host adapter. If you do decide to perform a low level format, do not abort the format as this is likely to make the drive inoperable. A low level format, with verify turned on, will typically take two hours for ST373405 models and 90 minutes for ST336605 models.Protect against power failure or other power interruptions during the format.a.Turn on DC power to the host system.b.Boot the system from a system floppy, CD, or from a previously installedhard disc drive if there is one.c.Format the drive.Caution.Formatting a drive erases all user data. Be sure that you under-stand this principle before formatting any hard disc drive. It is notnecessary to format a drive that previously has been used tostore data, unless your intention is to erase all user data. Seagateis not responsible for lost user data.Cheetah disc drives are designed to operate with a variety of operating sys-tems. Please refer to your system or SCSI controller manual for information about formatting and setting up the drive. Some quick desktop system notes are provided below.•Microsoft TM. Set the drive type in CMOS to “Zero,” “None,” or “No hard drive installed.” Use FDISK.EXE and FORMA T.EXE. Systems using Win-dows 98 or later can create one single partition (drive letter) on the drive.•Macintosh TM. Use a third-party drive utility (most revisions of Apple’s HD Setup utility only work with drives having special Apple firmware). Troubleshooting•Drive does not spin up. Check cables and all jumper settings. Make sure cable pin 1 (edge stripe) matches PCB pin 1.•Drive spins, but no LED on/off activity. Check SCSI ID setting. Set the ID so that each device on the SCSI chain has its own unique ID. See also the next item below. Host I/O controller is usually ID7.•Computer does not seem to recognize the drive. Verify that the drive is enabled by the SCSI host adapter setup utility.•FDISK does not detect the drive. Run the FDISK program located on your Windows startup diskette. Type fdisk/status to verify that your hard drive is present.Seagate support servicesFor online information about Seagate products, visit or ***********************************************If you need help installing your drive, consult your dealer first. If you need additional help, call a Seagate technical support specialist. Before calling, note your system configuration and drive model number (ST373405LW/ LWV or ST373405LC/LCV).Africa+31-20-316-7222Norway800-113 91 Australia1800-14-7201Poland00 800-311 12 38 Austria0 800-20 12 90Spain900-98 31 24 Belgium0 800-74 876Sweden0 207 90 073 Denmark80 88 12 66Switzerland0 800-83 84 11 France0 800-90 90 52Singapore800-1101-150 Germany************Taiwan+886-2-2514-2237 Hong Kong800-90-0474Thailand001-800-11-0032165 Indonesia001-803-1-003-2165Turkey00 800-31 92 91 40 Ireland 1 800-55 21 22United Kingdom************Italy800-790695USA/Canada/1-800 SEAGA TE or Malaysia1-800-80-2335Latin America+1-405-936-1234 Middle East+31-20-316-7222Other EuropeanNetherlands0 800-732-4283countries+31-20-316-7222 New Zealand0800-443988Warranty. Contact your place of purchase or our web site (above).Return Merchandise Authorization (RMA). Before returning the drive, verify that it is defective. Seagate Worldwide customer service centers are the only facilities autho-rized to service Seagate drives. Contact nearest center for return procedures and trade regulations.Shipping the driveCaution. Back up the data before shipping. Seagate assumes no responsibility for data lost during shipping or service. Shipping drive in an unapproved container voids the warranty. Pack the drive with original box and packing materials. Use no other materials. This prevents electrical and physical damage in transit.© 2001 Seagate T echnology LLC All rights reservedPublication number: 100109946, Rev. A, April 2001, Printed in U.S.A.Seagate, Seagate Technology, and the Seagate logo are registered trademarks of Seagate T echnology LLC. Cheetah is a registered trademark of Seagate T echnology LLC. Other product names are registered trademarks or trademarks of their owners. Seagate reserves the right to change, without notice, product offerings or specifica-tions.。
4731R 12GHz高清视频线，RG-11 U类型，75欧姆，14AWG实心，CMR说明书
Part Number: 4731R12 GHz Coax, 4K UHD Precision Video Cable, RG-11/U Type, 75 Ohm, 14AWG Solid, CMRProduct DescriptionRG-11/U Coax, 14 AWG solid .064" silver-plated copper conductor, gas-injected foam HDPE insulation, Duofoil® bonded to core + tinned copper braid shield (95% coverage) + bonded to jacket, PVC jacket.Technical SpecificationsProduct OverviewPhysical Characteristics (Overall)ConductorInsulationOuter Shield MaterialOuter Jacket MaterialElectrical CharacteristicsConductor DCRCapacitanceInductanceImpedance75 OhmReturn Loss (RL)Frequency [MHz]Minimum Return (RL)5 MHz - 1600 MHz23 dB1600 MHz - 4500 MHz21 dB4500 MHz - 12000 MHz15 dBHigh Frequency (Nominal/Typical)Frequency [MHz]Nom. Insertion Loss1 MHz0.16 dB/100ft3.58 MHz0.30 dB/100ft5 MHz0.34 dB/100ft6 MHz0.37 dB/100ft7 MHz0.39 dB/100ft10 MHz0.45 dB/100ft12 MHz0.49 dB/100ft25 MHz0.67 dB/100ft55 MHz0.95 dB/100ft67.5 MHz 1.04 dB/100ft71.5 MHz 1.07 dB/100ft88.5 MHz 1.17 dB/100ft100 MHz 1.24 dB/100ft135 MHz 1.41 dB/100ft143 MHz 1.45 dB/100ft180 MHz 1.61 dB/100ft270 MHz 1.96 dB/100ft360 MHz 2.27 dB/100ft540 MHz 2.81 dB/100ft720 MHz 3.27 dB/100ft750 MHz 3.34 dB/100ft1000 MHz 3.89 dB/100ft1500 MHz 4.83 dB/100ft2000 MHz 5.65 dB/100ft2250 MHz 6.02 dB/100ft3000 MHz7.07 dB/100ft4500 MHz8.81 dB/100ft6000 MHz10.45 dB/100ft12000 MHz16.39 dB/100ftDelayNominal Delay Nominal Velocity of Propagation (VP) [%]1.2 ns/ft85 %VoltageUL Voltage Rating300 V RMSElectrical Characteristics Notes:Return Loss: Fixed bridge and termination Temperature RangeOperating Temp Range:-30°C To +75°CMechanical CharacteristicsUV Resistance:YesBulk Cable Weight:87 lbs/1000ftMax Recommended Pulling Tension:145 lbsMin Bend Radius/Minor Axis: 4 inStandardsNEC/(UL) Specification:CMRCEC/C(UL) Specification:CMGRG Type:11/U TypeSeries Type:Series 11Applicable Environmental and Other ProgramsEU Directive 2000/53/EC (ELV):YesEU Directive 2003/96/EC (BFR):YesEU Directive 2011/65/EU (ROHS II):YesEU Directive 2012/19/EU (WEEE):YesEU Directive 2015/863/EU:YesEU Directive Compliance:EU Directive 2000/53/EC (ELV); EU Directive 2002/96/EC (WEEE); EU Directive 2003/11/EC (BFR); EU Directive 2011/65/EU (ROHS II)EU CE Mark:YesEU RoHS Compliance Date (yyyy-mm-dd):2004-01-01CA Prop 65 (CJ for Wire & Cable):YesSuitabilitySuitability - Aerial:Yes - Black only, when supported by messenger wireSuitability - Burial:NoSuitability - Hazardous Locations:NoSuitability - Indoor:YesSuitability - Outdoor:Yes - Black onlyFlammability, LS0H, Toxicity TestingC(UL) Flammability:FT4UL Flammability:UL1666 Vertical ShaftUL voltage rating:300 V RMSPlenum/Non-PlenumPlenum (Y/N):NoPart NumberVariantsItem #Color4731R 0101000Black4731R 0105000Black4731R 0061000Blue, Light4731R N3U1000Mil Green4731R 0031000Orange4731R 0071000Purple4731R 0021000RedProduct NotesNotes:Print legend includes sequential footage marks.© 2019 Belden, IncAll Rights Reserved.Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.。
光纤通信实验箱芯片资料
MC10116是一个双通道的驱动器，4、5脚输入相应的2、3脚输出，为一个通道；9、10脚输入相应的6、7脚输出，为第二个通道。
逻辑图MC10116管脚功能图MC10116管脚功能图2、OP07放大器芯片管脚图与逻辑图OP07是一个高性能的低频运算放大器，放大信号的频率低于600KHz，2、3脚输入相应的6脚输出。
典型应用如下图所示。
MC10116管脚分布图MC10116典型应用图75107是一个高性能的、双通道的比较器。
SN75107管脚分布图SN75107的逻辑功能图MAX435是高性能的视频宽带放大器，可单端或双端输入、输出。
2、6脚输入，9、13脚输出。
MAX435管脚分布图MAX435典型应用图5、MAX404放大器芯片管脚图与逻辑图MAX404是一个高性能的低阻抗输出放大器，主要应用于视频输出级放大器。
2、3脚输入，6脚为输出。
MAX435管脚分布图MAX435典型应用图5、HF BR1414T光发送和HFBR2416光接收模块的应用HFBR1414T和HFBR2416T是一对高性能的数据光纤通信传输模块，采用多模光纤传输。
MAX435典型应用图HFBR1414T管脚分布图（底视图）1、NC（空）2、Signal（信号输入）3、VEE（接地或负电源）4、NC（空）5、NC（空）6、VCC（正电源）7、VEE（接地或负电源）8、NC（空）6、光收发一体模块的应用主要应用于高速的数据传输，采用单模光纤，传输距离长。
HFBR2416T 管脚分布图（底视图）1、 NC （空）2、 VCC （正电源）3、 COMMON （接地或负电源）4、 NC （空）5、 NC （空）6、 Data （信号输出）7、 COMMON （接地或负电源） 8、 NC （空） MAX435管脚分布图1、 接收信号地2、 接收数据输出（同相）3、 接收数据输出（反相）4、 收到信号有无检测输出5、 接收侧正电源6、 发送侧正电源7、 发送数据（反相）8、 发送数据（同相）9、 发送信号地MAX435典型应用图7、75452的管脚功能与典型应用75452是电流驱动器，可直接用作数字光发送机的驱动电路。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
元器件交易网
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright © 2000, Texas Instruments Incorporated。