缓存加速系统BSCC-5300S彩页
Quidway S5300 系列以太网交换机特性描述-QoS(V100R005C01_02)
前言
命令行格式约定
格式 粗体
斜体
[] { x | y | ... } [ x | y | ... ] { x | y | ... }*
[ x | y | ... ]* &<1-n> #
Quidway S5300 系列以太网交换机 特性描述-QoS
意义 命令行关键字（命令中保持不变、必须照输的部分）采用 加粗字体表示。 命令行参数（命令中必须由实际值进行替代的部分）采用 斜体表示。 表示用“[ ]”括起来的部分在命令配置时是可选的。 表示从两个或多个选项中选取一个。 表示从两个或多个选项中选取一个或者不选。 表示从两个或多个选项中选取多个，最少选取一个，最多 选取所有选项。 表示从两个或多个选项中选取多个或者不选。 表示符号&前面的参数可以重复 1 ～ n 次。 由“#”开始的行表示为注释行。
本文档主要适用于以下工程师： l 网络规划工程师 l 调测工程师 l 数据配置工程师 l 系统维护工程师
符号约定
在本文中可能出现下列标志，它们所代表的含义如下。
符号
说明
以本标志开始的文本表示有高度潜在危险，如果不能避 免，会导致人员死亡或严重伤害。
以本标志开始的文本表示有中度或低度潜在危险，如果 不能避免，可能导致人员轻微或中等伤害。
修订记录
修改记录累积了每次文档更新的说明。最新版本的文档包含以前所有文档版本的更新内 容。
文档版本 02 (2010-12-01)
第二次正式发布。相对于版本 01 (2010-08-15）的变化如下： 修改: l 1.3.4 流量监管 l 1.3.5 流量整形
文档版本 01 (2010-08-15)
商标声明
和其他华为商标均为华为技术有限公司的商标。 本文档提及的其他所有商标或注册商标，由各自的所有人拥有。
麒逸BSCC-5300S缓存加速系统
麒逸缓存加速系统1.1. 麒逸BSCC-5300S缓存加速系统BSCC-5300S1.2. 产品价值●BSCC-5300S缓存加速系统可以针对HTTP、在线视频、APP、音频、图片、P2P等热点的资源进行缓存，将缓存的资源存在本地，让用户的上网速度提升至少提升10倍。
●BSS-5300S在提升用户上网体验的同时间接节省出口带宽。
●采用旁路方式部署，对网络无任何影响。
●对于终端用户来说，设备是完全透明的，用户只会感觉到上网速度飞快。
1.3. 产品特性加速特性：◆支持至少258种常用HTTP扩展名文件的下载加速。
◆支持国内所有主流视频网站内的视频观看加速：优酷网、土豆网、乐视网、爱奇艺、56视频、酷6视频、网易视频、凤凰视频、新浪视频、腾讯视频、百度视频、CNTV网络电视、华数视频等。
◆支持视频切片缓存加速技术，智能合并视频重复资源。
◆支持常用下载软件加速：迅雷、快车、QQ旋风等。
PROPRIETARY & CONFIDENTIAL. 机密及专有。
ALL RIGHTS RESERVED. 版权所有，未经书面同意，不得转载。
◆支持移动终端APP文件下载加速：iOS、Android、Windows phone。
◆支持音频文件下载加速。
◆支持图片文件下载加速。
◆支持P2P下载加速。
云缓存特性：◆支持多机分布式部署，实现缓存云。
◆支持从云端自动获取预缓存资源数据。
安全管理特性：◆支持智能磁盘空间回收算法。
◆支持杀毒引擎模块，病毒库每天自动更新，确保数据安全。
◆支持版本和配置的备份、恢复、帐号权限分配、帐号登录日志查询。
1.4. 产品规格PROPRIETARY & CONFIDENTIAL. 机密及专有。
ALL RIGHTS RESERVED. 版权所有，未经书面同意，不得转载。
1.5. 典型应用部署模式：旁路部署，对现有网络无任何影响。
部署场景：运营商、大学、广电、教育局或具备大并发量上网规模的单位。
Brocade 5300 SAN交换机
Brocade 5300 SAN交换机80端口8 Gb/s光纤通道交换机性能特点Brocade 5300 - 80端口8 Gb/秒光纤通道交换机，适用于入门级和中型企业SAN。
快速可靠的8 Gbps的性能∙无阻富裕带宽平台，总带宽为1360 Gb/秒。
∙旨在通过增强的Brocade Inter-Switch Link(ISL)干线合并(Trunking)技术提高网络性能，在一对交换机之间结合最多8个端口（速度为2、4或8 Gb/秒），合并成速度高达64 Gb/秒的单个逻辑高速干线(ISL)。
∙提供自适应网络服务，包括自适应光纤质量服务、通信隔离及入站速率限制，使企业能够在虚拟环境中保持优化应用程序性能。
经济实用的可扩展性∙结合多达80个采用业界领先的8 Gb/秒技术的端口，通过高可用性和按需增加端口（从48到64再到80个端口）功能，提供“随发展需求投资”的扩展性能。
∙提供集成的、每端口路由以获得增强的可扩展性、互用性和故障隔离。
∙旨在通过提供具有自动感应功能的8 Gb/秒技术，还可识别1、2和4 Gb/秒设备，从而帮助保护现有投资。
简单部署和管理∙可在单个域即2U封装中提供80个端口，从而在简化管理的同时最大化端口密度。
∙使用Brocade EZSwitchSetup向导，将SAN配置简化为3步骤点击式任务。
∙含有 USB 端口以增加修复能力，方便进行固件升级及下载系统记录文件，具有错误记录功能。
∙符合高可用性要求，以及冗余、热插拔组件、无中断软件升级和用于各种SAN配置的热代码激活。
∙采用熟悉的Brocade软件和管理界面，包括Brocade EFCM和Brocade光纤管理器，从而简化管理并降低培训成本。
用于各种SAN环境的卓越价值∙旨在比上一代Brocade交换机提高40%的能源效率（瓦特/Gb），进一步帮助降低功耗和数据中心的总冷却负荷。
∙通过加速简单固件升级和下载系统日志文件，USB端口可帮助提供增强的可维护性和错误记录功能。
华为s5300li v200r005交换机产品说明书
S5300-LI Series Gigabit Enterprise Switches Product OverviewThe S5300-LI is a next-generation energy-saving gigabit Layer 2 Ethernet switch thatprovides flexible GE access ports and extensive services. It supports EEE and device sleeping, providing customers with a green, easy-to-manage, easy-to-expand, and cost-effective gigabit to the desktop solution.Product AppearanceS5300-28P-LI-AC S5300-28P-LI-DC ●●●S5300-52P-LI-AC S5300-52P-LI-DC ●●●S5306TP-LI-AC ●●S5300-10P-LI-AC ●●S5300-28X-LI-AC ●●S5300-28X-LI-DCS5300-28X-LI-24S-AC S5300-28X-LI-24S-DC ●●S5300-52X-LI-AC S5300-52X-LI-DC ●●S5300-52X-LI-48CS-AC S5300-52X-LI-48CS-DC ●●Product Features●Innovative Energy Saving DesignThe S5300-LI offer customers extensive selection of energy-saving with standard mode, basic mode and advanced mode that accommodates most needs. By matching port link down/up, optical-module in-place/out of place, port shut down/undo shutdown, idle period, busy period to increase the proportion of the dynamic energy-saving to reduce the power consumption.The S5300-LI series reduces energy consumption without compromising system performance, ensuring good user experience. The S5300-LI adopts multiple cutting-edge energy-saving designs, including Energy Efficient Ethernet (EEE), port energy detection, dynamic CPU frequency adjustment, and device sleeping.●Comprehensive reliability mechanismsBesides STP, RSTP, and MSTP, the S5300-LI supports enhanced Ethernet reliability technologies, such as Smart Link and RRPP (Rapid Ring Protection Protocol), which implementmillisecond-level protection switchover and ensure network reliability. The S5300 also provides Smart Link multi-instance and RRPP multi-instance to implement load balancing among links, optimizing bandwidth usage.The S5300-LI supports the Smart Ethernet Protection (SEP) protocol, a ring network protocol applied to the link layer on an Ethernet network. SEP can be used on open ring networks and can be deployed on upper-layer aggregation devices to provide fast switchover (within 50 ms), ensuring continuous transmission of services. SEP features simplicity, high reliability, fast switchover, easy maintenance, and flexible topology, facilitating network planning and management.The S5300-LI supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a ring automatic protection switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX.Complying with IEEE 802.3ah and 802.1ag, the S5300-LI supports point-to-point Ethernet fault management and can detect faults in the last mile of an Ethernet link to users. The S5300-LI supports Y.1731. Besides fast end-to-end service fault detection, the S5300-LEI can use the performance measurement tools defined in Y.1731 to monitor network performance, providing accurate data about network quality.●Well-designed QoS policies and security mechanismsThe S5300-LI implements complex traffic classification based on packet information, such as the 5-tuple, IP preference, ToS, DSCP, IP protocol type, ICMP type, TCP source port, VLAN ID, Ethernet protocol type, and CoS. ACLs can be applied to inbound or outbound directions on an interface. The S5300 supports a flow-based two-rate three-color CAR. Each port supports eight priority queues and multiple queue scheduling algorithms, such as WRR, DRR, PQ, WRR+PQ, and DRR+PQ. All of these ensure the quality of voice, video, and data services.The S5300-LI provides multiple security measures to defend against Denial of Service (DoS) attacks, as well as attacks against networks or users. DoS attack types include SYN Flood attacks, Land attacks, Smurf attacks, and ICMP Flood attacks. Attacks to networks refer to STP BPDU/rootattacks. Attacks to users include bogus DHCP server attacks, man-in-the-middle attacks, IP/MAC spoofing attacks, and DHCP request flood attacks. DoS attacks that change the CHADDR field in DHCP packets are also attacks against users.The S5300-LI supports DHCP snooping, which generates user binding entries based on MAC addresses, IP addresses, IP address leases, VLAN IDs, and user access interfaces. DHCP snooping discards invalid packets that do not match any binding entries, such as ARP spoofing packets and IP spoofing packets. This prevents hackers from using ARP packets to initiate man-in-the-middle attacks on campus networks. The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.The S5300-LI supports strict ARP learning, which prevents ARP spoofing attacks that exhaust ARP entries. It also provides IP source checks to prevent DoS attacks caused by MAC address spoofing, IP address spoofing, and MAC/IP spoofing.The S5300-LI supports centralized MAC address authentication, 802.1x authentication, and NAC. It authenticates users based on statically or dynamically bound user information, such as the user name, IP address, MAC address, VLAN ID, access interface, and flag indicating whether antivirus software is installed. VLANs, QoS policies, and ACLs can be dynamically applied to users.The S5300-LI can limit the number of MAC addresses learned on an interface to prevent attackers from exhausting MAC address entries by using bogus source MAC addresses. This function minimizes the packet flooding that occurs when users' MAC addresses cannot be found in the MAC address table.Maintenance-free design and manageabilityThe S5300-LI supports automatic configuration, plug-and-play features, and batch remote upgrades. These capabilities simplify device management and maintenance and reduce maintenance costs. The S5300 supports SNMP v1/v2/v3 and provides flexible methods for managing devices. Users can manage the S5300 using the CLI, Web NMS and Telnet. The NQA function assists users with network planning and upgrades. In addition, the S5300 supports NTP, SSH v2, HWTACACS, RMON, log hosts, and port-based traffic statistics.The S5300-LI supports GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to reduce manual configuration workloads of network administrators and ensure correct VLAN configuration. In a complex network topology, GVRP simplifies VLAN configuration and reduces network communication faults caused by incorrect VLAN configuration.The S5300-LI supports MUX VLAN. MUX VLAN isolates the Layer 2 traffic between interfaces in a VLAN. Interfaces in a subordinate separate VLAN can communicate with ports in the principal VLAN, but cannot communicate with each other. MUX VLAN is typically used on an enterprise intranet to isolate user interfaces from each other while still allowing them to communicate with server interfaces. This function prevents communication between network devices connected to certain interfaces or interface groups, but allows these devices to communicate with the default gateway.High scalabilityThe S5300-LI supports intelligent stacking (iStack). Multiple S5300s can be connected with stack cables to set up a stack, which functions as a virtual switch. A stack consists of a master switch, a backup switch, and several slave switches. The backup switch takes over services when the master switch fails, reducing service interruption time. Stacks support intelligent upgrades so that users do not need to change the software version of a switch when adding it to a stack. The iStack function allows users to connect multiple switches with stack cables to expand the system capacity. These switches can be managed using a single IP address, which greatly reduces the costs of system expansion, operation, and maintenance. Compared with traditional networking technologies, iStack has distinct advantages regarding scalability, reliability, and system architecture.Product SpecificationsApplications●Application in Data CentersThe S5300 can be used in a data center to access the gigabit server and connect to upper-layer devices by link aggregation. If multiple servers are available, you can use the iStack technology to improve network reliability.●Application in 1000 Mbit/s Access Rate for TerminalsS5300CSSInterWANHuawei Enterprise S5300 Series Gigabit SwitchesSecurity Level2014-10-25 HUAWEI Confidential Page 11, Total 11。
Secoway USG5300系列统一安全网关彩页20100 108
Secoway USG5300系列统一安全网关华为技术有限公司产品概述网络安全状况不断的恶化，越来越多基于各项应用和业务的深层次网络安全问题困扰着用户。
恶意入侵、钓鱼网站、木马程序以及P2P泛滥等网络安全问题，导致企业网络效率低下，业务安全受到严重威胁。
华为公司长期致力于为用户提供全面的网络安全解决方案，拥有业界最强的网络协议分析团队以及最全的协议知识库，针对各种网络协议的安全威胁有着深入的分析和理解，可以为用户提供应对各种网络安全威胁的技术支撑。
USG5300系列统一安全网关是华为公司推出的新一代统一安全网关，能够为用户提供防火墙、VPN、IPS、反病毒、URL过滤等多项领先的安全功能，提供全方位的网络系统安全防护，保障网络系统高效运行。
产品系列USG 5300系列产品特点完善的防火墙功能领先的架构平台USG5300系列统一安全网关采用了先进的多核硬件架构，多线程并行处理，优化了安全业务处理流程，特别是针对首包处理的优化，使USG5300系列统一安全网关具备同档产品业界第一的每秒新建连接数，足以应对各种大规模网络流量的应用。
同时，将数据解封装和深度检测进行分离，实现多种深度检测并行，大幅度提升设备在深度检测状态下的性能。
10年成功的商业应用，成熟的VRP软件平台为USG5300系列统一安全网关提供健壮的操作系统，是用户最可信赖的安全操作系统。
业界领先的产品性能USG5300系列统一安全网关采用多核并行处理技术，最大可支持数十条线程并行处理，产品在性能上有了质的飞跃，三大主要性能指标在业界处于领先位置，为用户带来超高的性能体验，尤其是作为防火墙最关键的性能指标“每秒新建连接数”，达到了惊人的每秒15万条，在业界同类产品中处于绝对的领先，能在短时间内为用户的网络访问建立大量的连接，提供网络的高速转发和低延迟，同时，也可以有效的应对网络中产生的大量突发流量和网络攻击流量。
可满足多种高速转发的网络应用的要求，充分满足用户网络对带宽高速增长的需要。
EMC VNX5100-5300对比
2048 2048 2TB
软件特性
管理 基本软件（已包含） 支持的操作系统
文件特性（NAS)
NAS刀片（ X-Blade ）数量 每个X-Blade支持的FC端口 每个X-Blade支持的最大IP端 口 每个X-Blade支持的最大以太 网口
N/A N/A N/A N/A FC
不支持 不支持 不支持 不支持
2个10/100/1000M LAN Unisphere™ for Block EMC Virtual Provisioning文件单实例,压缩,虚 拟资源调配 支持HP-UX, IBM AIX, Sun Solaris, Linux, Windows, Novell NetWare, VMware等所需的 软件许可 1U 服务器 最小/ 最大 2/4/8 Gb/s 1GB iSCSI 10/100/1000M LAN
6/125 5 240TB
512 512 2TB
2个10/100/1000M LAN Unisphere™ for Block EMC Virtual Provisioning文件单实例,压缩,虚 拟资源调配 支持HP-UX, IBM AIX, Sun Solaris, Linux, Windows, Novell NetWare, VMware等所需的 软件许可
FC,NFS,CIFS,iSCSI
Model: EMC VNX5100 项目
硬件性能特征
控制器数量 高速缓存 前端FC主机接口（最大） iSCSI前端主机接口（最大） 后端sas2磁盘接口 主机机箱 标配2个 2 2 8GB 4GB/控制器 16GB 标配每控制器4个板载2、4、8gb/s自适应FC端口 16 8 N/A 不支持 8 每控制器2条6gb sas2.0后端磁盘接口总线 4 4 3U处理器机箱（控制器+DAE磁盘Enclosed)
产品彩页-VNX一代
二端口 10 Gb/s 可选 iSCSI 模块（带 TOE）
具有两个 10 Gb/s 以太网端口并可选择 SFP+ 的 iSCSI 模块，通过光 纤或主动双轴铜端口与以太网交换机连接，包括 TCP 分载引擎
二端口 10 GBaseT iSCSI 模块（带 TOE）
具有两个 10 GBaseT 以太网端口的 iSCSI 模块，通过铜线与以太网交 换机连接，包括 TCP 分载引擎
规格
VNX7500™
体系结构
EMC VNX 基于强大的全新 Intel Xeon-5600 系列处理器，实现了模块化的体系结构，集成了用 于数据块、文件和对象的硬件组件，并提供对本机 NAS、iSCSI、光纤通道和 FCoE 协议的并发 支持。本系列产品通过二到八个 X-blade 数据移动器提供文件 (NAS) 功能，通过充分利用全 6 Gb SAS 磁盘驱动器拓扑的双存储处理器提供数据块（iSCSI、FCoE 和光纤通道）存储。您还可以 从数据块或文件功能开始，然后在需要时轻松升级到统一存储。统一配置包括以下机架安装式存 储模块：
24 个
16 个
0个
24 个 24 个
0个
32 个 32 个
16 个
16 个
8个
12 个
8个
12 个
2 个或 6 个（需要高带 4 个 宽选项时为 6 个）
16 个
12 个
16 个
4 个或 8 个（每阵列使 用 2 或 4 个 UltraFlex IO 模块）
文件 X-Blade 数量
不适用
1-2 个
VNX5100
4/75 个
3U 磁盘处理器存储模 块（可容纳 15 个 3.5 英寸或 25 个 2.5 英寸 SAS/闪存 驱动器）
华为OceanStor 5300 5500 5600 5800 V3中端存储系统彩页
存储管理软件 虚拟化特性支持 异构虚拟化 块级虚拟化 计算虚拟化支持
5300 V3
5500 V3
5600 V3
5800 V3
多核多处理器组
32GB~256GB
48GB~512GB
64GB~512GB
8
8
8
FC、FCoE、iSCSI、InfiniBand、NFS、CIFS、HTTP、FTP
SmartQoS(智能服务质量控制)，SmartPartition(智能分区)，SmartCache(SSD智能缓存)
SmartTier(智能数据分级)， SmartThin(智能精简配置)，SmartMotion(智能数据迅移)，SmartMulti-Tenant(多租户)， SmartMigration(LUN迁移)， SmartCompression(在线压缩)，SmartDedupe(在线重删)， SmartQuota(配额管理)， SmartErase(数据销毁)
1Gbps Ethernet、10Gbps FCoE、10Gbps TOE、16Gbps FC、56Gbps InfiniBand
SAS3.0(单端口4*12Gbps)
2
2
8
12
12
28
500
750
1000
SSD、SAS、NL SAS
0, 1, 3, 5, 6, 10, 50
256
1024
2048
2048
■■高中低端的融合：业界唯一高中低端互联互通，无需借助第 三方系统，数据即可在不同型号设备中自由流动。
■■SSD和HDD的融合：集成传统存储和全固态存储双重优势，可 将不同类型介质的性能均发挥到极致，满足用户在性能和成 本上的最优均衡。
H3C+S5500-SI系列交换机彩页
支持 DHCP Client 支持 DHCP Snooping 支持 DHCP Relay 支持 DHCP Snooping option82/DHCP Snooping option82
支持静态路由 支持 RIP/RIPng
杭州华三通信技术有限公司
第 4 页, 共 9 页
丰富的 QoS 策略
H3C S5500-SI 系列交换机支持支持 L2（Layer 2）~L4（Layer 4）包过滤功能，提供基于 源 MAC 地址、目的 MAC 地址、源 IP 地址、目的 IP 地址、TCP/UDP 端口号、协议类型、VLAN 的流分类。提供灵活的对列调度算法，可以同时基于端口和队列进行设置，支持 SP（Strict Priority）、WRR（Weighted Round Robin）、SP+WRR 三种模式。支持 CAR（Committed Access Rate）功能，粒度最小达 64Kbps。支持出、入两个方向的端口镜像，用于对指定端口上的报文 进行监控，将端口上的数据包复制到监控端口，以进行网络检测和故障排除。
支持特性 管理与维护
S5500-28C-SI
S5500-52C-SI
S5500-28C-PW S5500-52C- S5500-20TP
R-SI
PWR-SI
-SI
支持 XModem/FTP/TFTP 加载升级 支持命令行接口（CLI），Telnet，Console 口进行配置 支持 SNMPv1/v2/v3，WEB 网管 支持 RMON （Remote Monitoring）告警、事件、历史记录 支持 iMC 智能管理中心 支持系统日志，分级告警，调试信息输出 支持 HGMPv2 支持 NTP 支持电源的告警功能，风扇、温度告警 支持 Ping、Tracert 支持 VCT（Virtual Cable Test）电缆检测功能 支持 DLDP（Device Link Detection Protocol）单向链路检测协议 支持 Loopback-detection 端口环回检测
最全的通信图标库可用于VISIOPPT等
AAA
Cach(缓存)
信令管理
Metro
Lan Switch
OLT
MD
Bridge
VOATM GW
NAS
TMG8000系列 VOIP GW
MA5100
MA5200
ONU
AGW
Radium 8750
SIPP
路由器
VOIP功能 路由器
MSR多业务 交换机 (ATM/IP/MPLS)
IAD
Portal
VOIP功能 路由器
MSR多业务 交换机 (ATM/IP/MPLS)
IAD
Portal
C&C08
MRS6000
AMG5000
SMⅠ SMⅡ
iOLT
PBX
SIP Server
APP Server
FA
MSTP
CMTS
抽象图标—黄色
Soft X(CS)
拓扑管理
策略管理 服务器
ATM 交换机
SGW 信令网关
Video Phone
Tunnel
Set Top Box (STB)
Printer
Personal Computer
Web Browser
Weather Station
Weather Balloon
Web Page
Web Server
Woman - End User
Woman - Sitting
作图元素
Cisco ONS 15200 Series Metro DWDM
Cisco Hub
Cisco uBR910 Series Cable DSU
Cisco Universal Gateway Manager
brocade_5300_switch_CN
产品彩页存储区域网络一款适用于虚拟化数据中心的业界领先交换机亮 点• 在单域、优化的2U 机型中提供了最多80个的完全8 Gbit/sec 1:1的高性能端口 • 提供了同类最佳的企业SAN 交换机端口密度和可扩展性以及冗余、可热插拔组件和不间断软件升级• 拥有自动感应1、2、4和8 Gbit/sec 功能以及与博科和博科M 系列fabric 架构的本地化操作，可保护现有的设备投资 • 特别提供了按需增加端口(Ports and Demand)功能，实现了简单快捷且经济高效的可扩展性，可以16端口的增量从48个端口扩展到80个端口• 提供了服务质量(QoS)等适应性网络服务，可帮助优化整合式虚拟环境中应用性能• 支持光纤通道(FC)集成路由(IR)，可在在保持远程fabric 架构隔离的同时进行选择性设备共享，实现更高水平的可扩展性和故障隔离• 通过提高带宽并降低功耗，从而改善节能省电性随着业务数据价值和数量的持续增长，各机构所需的技术解决方案不仅要易于实施和管理，还要能以最小中断实现增长和变化。
Brocade 5300交换机是专为快速增长关键业务环境中连接的整合而设计的，在高效设计的2U 机型的48、64和80端口配置中结合进了1、2、4和8 Gbit/sec 技术。
其密度、性能以及“用多少买多少”(pay-as-you-grow)可扩展性的三方面优势使得它可在降低虚拟化服务器和存储复杂性的同时提高服务器和存储利用率。
Brocade 5300可用于fabric 架构核心端或分层式核心-边缘架构基础设施边缘端，通过到Brocade Fabric OS (FOS)和M-Enterprise OS (M-EOS)*环境的原生E_Port 连接，实现与现有博科交换机的无缝操作。
其渐进式设计带来了极高的电源、散热和机架密度效率，从而可帮助实现大中型服务器和存储的整合。
Brocade 5300还包含进了适应性网络功能，可在为数据中心应用提供最高等级服务的同时实现对高度整合环境中资源的更有效管理。
全球缓存ir网络适配器gc-100-06 gc-100-12 gc-100-18集成说明书
Integration Note Manufacturer: Global CacheModel Number(s): GC-100-06, GC-100-12, GC-100-18Document Revision Date: 1/10/2013O VERVIEW AND S UPPORTED F EATURESThe Global Cache is an IR Network Adapter that converts hex signals sent over IP to IR codes that can be configured for output from 3.5mm jacks using either IR flashers or direct cabling (see note below). The Global Cache also supports RS-232 serial ports for control of serial devices, and relays on supported models. Optional cables are also available to use the IR ports as sense inputs.T HE GC-100 SUPPORTS THE FOLLOWING FEATURES:RS-232 Ports: The GC-100-06 includes one RS-232 port; the GC-100-12 and GC-100-18 each have two. These provide a convenient means to connect to sub-systems close to the Global Cache. IMPORTANT: The Global Cache serial ports are not compatible with all serial devices. Test all serial devices using these ports for proper operation prior to installation.IR Output: The GC-100 can send IR signals to IR flashers compatible with ELAN, Xantech, Speakercraft and Niles (etc.) in the frequency range of 20KHz – 250KHz. The GC-100-06 includes three connections, whereas the GC-100-12 and GC-100-18 includes 6 connections, any of which can be used for IR output.Note: Any connection setup for IR output cannot be used for input.Inputs: Any of the IR output connections on the GC-100 can be configured as an input. Allowed input voltages are from -24V to +24V. Voltages greater than 2.5V are considered to be ON, and voltages less than 0.8V are considered to be OFF. Two examples where this is useful are for video sensing and power sensing.Note: Any connection setup for input cannot be used for IR output.See below for Global Cache Sensor cables:GC-SV1 Video Out Sensor cableGC-SP1 AC/DC Input Sensor cableGC-SC1 Contact Closure Sensor cableRelay Outputs: The GC-100-12 and GC-100-18 include three normally open relays rated at 24V (DC or AC) and 500mA.T HE GC-100 DOES NOT SUPPORT THE FOLLOWING FEATURES:IR output direct to an IR input port on a device: The GC-100 uses a non standard voltage for their IR outputs. This works fine with IR flashers but does NOT typically work for direct input to a device or receiver port on a connecting block. Global Cache makes an adapter cable, GC-CGX, that will convert the voltage and allow connection to some devices directly. Refer to Global Cache documentation and the Alternative Connections diagram below for details.IR Input: Global Cache ports cannot be used for IR Input, and optional parts (IRL or IRE) are required for this function. See the appropriate Integration Notes for more detail.Standalone Operation: The Global Cache is an IR Network Adapter. It will not route IR independently of an external control system.I NSTALLATION O VERVIEW1. During the rough-in phase, pull Cat5 from the GC-100 location back to the System Enclosure.2. If using RS-232 from the GC-100, and the GC-100 is a distance from the equipment, then pull Cat5from the equipment to the location of the GC-100. 3. If using RS-232 from the GC-100, install and connect the RS-232 equipment to the GC-100. 4. If using IR from the GC-100, install the equipment that will be controlled by the GC-100, and run IRflashers back from each piece of equipment to the GC-100. 5. If more than three (for the GC-100-06) or six (for the GC-100-12 and GC-100-18) IR outputs areneeded, then install additional GC-100 units, or use an IR repeating block to repeat the signal as needed. 6. Configure the GC-100 using its built-in web server or the Global Cache Discovery & ConfigurationUtility. See Configuring the GC-100 below. 7. Connect the GC-100 to the g! system electrically.8. Configure the g! system for the GC-100. Refer to Using the GC-100 with g! and g! SystemConfiguration Details below.C ONNECTIOND IAGRAM : RS-232 C ONNECTIONSB ILL O F M ATERIALS FOR RS-232C ONNECTIONSD eviceanufacturer umber P ro to co l to RJ45 Adapter RS-232DB-9 M Included with HW-USB-100RS-232RJ-45 M M ust terminate all 8 conductors RS-232DB-9 Female X RJ-45 Female Included with HW-USB-100IP RJ-45 M IP RJ-45 Female X RJ-45 Female Use any available LAN port2)IPC ONNECTIOND IAGRAM : IR CONTROL FROM G !In this configuration IR commands can be sent from the g! system through the GC-100 to each IRcontrolled device individually. An IR command sent to one device will not be sent to any other IR device unless it is specifically configured to do so.B ILL O F M ATERIALS FOR IRC ONNECTIONSD eviceumber P ro to co ltesN/A IR Compatible with Xantech, Speakercraft, Niles, RussoundCat5 Cable Assy.N/A IP Network Assembly NWA1IP Use any available LAN portg! System ControllerVarious (e.g. HC-12)IPC ONNECTIOND IAGRAM : IR CONTROL FROM IR R EMOTES AND G !In this configuration, IR commands can be sent from the g! system through the GC-100 to each IRcontrolled device individually. IR commands can also be received from an IR remote control through an IR receiver connected to the IR connecting block. The connecting block will then repeat those IR commands out of its emitter ports to any IR devices connected to the block.Network AssemblyReceiver is required)g! System ControllerB ILL O F M ATERIALS FOR IRC ONNECTIONSC ONNECTIOND IAGRAM : IR CONTROL FROM IR R EMOTES AND G ! (A LTERNATIVE C ONNECTIONS )In this configuration, IR commands can be sent from the g! system through the GC-100 to IR controlled devices, individually when connected directly to the GC-100, or to a group of IR devices when connected through the IR connecting block.Note: Any IR commands received by the IR receiver will be repeated to any devices connected to the IR block but NOT to any devices connected directly to the GC-100.Network Assemblyconnection is required)g! System ControllerB ILL O F M ATERIALS FOR IRC ONNECTIONSC ONNECTIOND IAGRAM : IR CONTROL FROM RF R EMOTES AND G !In this configuration IR commands can be sent from the g! system through the GC-100 to each IRcontrolled device individually. IR commands can also be received from an RF remote control through an RF base station.Note: Any IR commands received from the RF remote will be sent to all devices connected to the RF base station.B ILL O F M ATERIALS FOR IRC ONNECTIONSD eviceM anufacturer art N umber P ro to co lC nnecto r Various IR 3.5mm M Compatible with Xantech, Speakercraft, Niles, RussoundCat5 Cable Assy.Installer IP RJ-45 M ale X RJ-45 M Network Assembly ELAN NWA18IP RJ-45 Female X RJ-45 Female Use any available LAN portg! System ControllerELANVarious (e.g. HC-12)IPC ONFIGURING THE GC-100The Global Cache units come out of the box with a network configuration that needs to be changed to properly function on the g! system default network. The procedure for configuration depends on the version of the Global Cache. Check the label on the box of each unit to be configured. Follow the appropriate procedure below to configure the different versions of Global Caches.Note: Units purchased from ELAN will be preconfigured to a static IP. If you are using only one unit, or if you made special notation on your order to have multiple units configured to consecutive IP’s, you may skip this step. See the sticker on the unit for its IP.If you have multiple Global Caches in an installation, power them up one at a time and change the IP address as follows. Each Global Cache must be on a different IP.GC-100–V ERSION 3.0 AND LATERGlobal Cache units versions 3.0 and later come configured as a DHCP client. These need to be configured with static IP addresses using the GC Finder application as follows:Note: Version 3.0 GC-100s can also be configured from the built-in web server1. Browse to the Global Cache website and download the GC Discovery application./files/Software/GC-Discovery.zip2. Set up the unit to be configured by plugging in power and the network cable to allow the unit toboot up and obtain an IP address.3. Unzip and run the GCDiscovery applicationdownloaded in step 1 above.A GC-100 Discovery andConfiguration Utility windowwill popup as shown on theright. The GC-100 to beconfigured will show up in thelist with its model#, current IPAddress and MAC Address.Note: Global Caches may takea moment to appear in the list.4. Click on the Global Cache inthe list then click theConfigure button to open theGC-100 configuration windowas shown below.5. In the Network Settings area change the following: DHCP to Static; IP Address to 192.168.0.41;Gateway to 192.168.0.1. If you are configuring more than one Global Cache then set the second unit to 192.168.0.42, the third to 192.168.0.43, and so on.6. Check your settings against the screenshot below, then click Apply. The unit should reboot.address.GC-100—P RIOR TO VERSION 3.0If you did not purchase the GC-100 from ELAN and it is prior to version 3.0, then the IP address of the unit will be the factory default 192.168.1.70. To configure the GC-100, you must first get your computer’s IP address to the same subnet, so it has an address that is 192.168.1.X, where X is between 1 and 254, but not equal to 70.If you purchased the GC-100 from ELAN, then the IP address will be preset to 192.168.0.41.When you bring up the GC-100 web interface, you will be able to do the following:o Setup the serial ports on the GC-100. The g! system automatically performs this step for you, so you should NOT make any changes to the serial port settings in the web interface.o Configure the IR connectors for input or output, as explained below.o Set the new IP address of the GC-100, as explained below.To bring up the web interface to the GC-100, ensure you are on the correct subnet (as explained above), and then surf to the appropriate address (192.168.0.41 for units from ELAN, or 192.168.1.70 for units from other sources): you will see the web interface as shown below (this shows a GC-100-12):Note: Screenshots are from version 2.0 units. Newer units will have different web pagesC ONFIGURE C ONNECTORS FOR I NPUT OR O UTPUTIf you plan to use either the IR output or the input function on the GC-100:1. Click IR and Sensor 1 at left: an image similar to that below appears.2. Change the Sensor Notifications to Enabled.3. For each of the three connectors (1, 2, 3), select either:o IR Out if that connector is for IR outputo Sensor In if that connector is for an input.4. Click Apply to save your settings. If the browser hangs, restart the browser and return to the GC-100,and verify that the settings now appear as desired.5. For the GC-100-12 and GC-100-18, click IR and Sensor 2 at the left, and then repeat the stepsabove to configure the outputs for connectors 4, 5 and 6.C ONFIGURE IP A DDRESSTo set the IP address of the GC-100:1. Click Network at left: an image similar to that below appears.2. Type in the desired IP address in the IP Address box: by default we suggest setting the first GC-100to 192.168.0.41, the second GC-100 to 192.168.0.42, and so on.3. Important: Check and recheck your new IP address for typos or errors before clicking Apply.4. Click Apply to save your settings. If the browser hangs or does not connect to the GC-100 at its newaddress shut down the browser then open a command prompt. From the start button choose Run then type cmd to open the command prompt. Type arp –d * to clear browser arp table. Reopen the browser to connect to the GC-100. Verify that the settings now appear as desired.5. Finished: Close the browser.U SING THE GC-100 WITH G!g! will automatically populate the proper number of IR senders and the relay outputs if applicable when it is initially configured. See below for details pertaining to the functionality of the GC-100.S ERIAL P ORTSImportant: The Global Cache should be configured and discovered on the input/output tab prior to setting up control of a device through its serial com ports.The serial ports on the GC only need to be added in the configurator as a Communication Device on the tab of the subsystem that they are going to be used for. For instance if a GC com port is used to control a lighting system, the GC com device is only configured on the lighting tab of the configurator. The proper selection for a com device using a Global Cache com port is (IP to Serial) Global Cache. This will open up a selection box to choose Com 1 or Com 2 from the Global Cache. Finally add the device to be connected following its Integration Note.IRThe IR senders are automatically populated once the unit is discovered in the configurator. These are then linked to IR Devices to allow proper routing of IR to the GC IR ports. For more Information, refer to the IR lessons of the g! Training Guide. The training guide can be found in the Dealer area of the ELAN website ().R ELAYSThe relays on the GC-100-12 and GC-100-18 are “Normally Open” contacts rated for 500mA at 24V (DC or AC). These relays are automatically populated during the “Discover Devices” process and can be actuated directly using a Button Press or by using the Event Mapper. The two possible ways of implementing this are outlined below:Button Press:Add a new control to a custom tab orHome Page. Select either “OutputMomentary” or “Output Toggle” as thecontrol type:“Output Momentary” will trigger therelay only while the button is beingheld. “Output Toggle” will turn therelay on the first time the button ispressed, off the second time. Afterthe button has been added, select it.The “Output Momentary ButtonProperties” dialogue box will bedisplayed. Click the arrow in the“Connect To” dropdown, and selectthe output relay to control.Event Mapper:On the “Event Mapper” tab. Right click “Event Maps” and select“Add New Event Map”. Under “Events” on the right, select the eventthat will trigger the relay, such as a faulted zone in the securitysystem. Then under “Commands”, select “Outputs”, the appropriateGC-100 Output Module, and select “Turn On” or Turn Off” fromavailable events.I NPUTSNote: Inputs will not auto discover and require the following configuration steps.Any of the IR output ports can be alternatively configured as an input. GC Inputs in the g! system can be connected to an Input Toggle Indicator on a custom page or used as a Trigger or Conditional in the event mapper. See page 1 for compatible input sensor cables.This requires that the port is first specified as an input in the Global Cache configuration, see details in the Global Cache Web (prior to 2.0) configuration above. Then on the input/output tab of the configurator any inputs are to be used with the GC and the g! system will need to be setup as follows:1. Right-click on Inputs, choose Add New Input Controller,and then select Global Cache InputModule as shown below. Set the Module number, referring to the Module and DeviceInformation table below. Click Apply to save the changes.2. Click the + to expand the Input Module node then right-clickwhere it says no inputs and select Add New Input. Name theinput as desired and set the Device ID, referring to the Moduleand Device Information table below. Click OK t o add the input.3. Finally, connect the input to an Input Toggle Indicator or usethe input in an event map as desired:G!C ONFIGURATION D ETAILSThe following sections provide details on configuring the GC-100. There are four separate situations covered in the tables below:1. Configuring the RS-232 ports on the GC-1002. Configuring IR outputs on the GC-1003. Configuring the relay outputs on the GC-1004. Configuring inputs on the GC-100RS-232,R ELAY,IR C ONFIGURING M ODULE AND D EVICE I NFORMATIONYou will need the following information when you configure the GC-100 units with the Configurator:Connection GC-100-06 GC-100-12 and GC-100-18Serial 1 Module 1 Module 1Serial 2 N/A Module 2Relay 1 N/A Module 3, Device 1Relay 2 N/A Module 3, Device 2Relay 3 N/A Module 3, Device 3Connector 1 Module 2, Device 1 Module 4, Device 1Connector 2 Module 2, Device 2 Module 4, Device 2Connector 3 Module 2, Device 3 Module 4, Device 3Connector 4 N/A Module 5, Device 1Connector 5 N/A Module 5, Device 2Connector 6 N/A Module 5, Device 3C OMMON M ISTAKES1. Incorrect Communication Device for initial GC-100 configuration. The proper Communication Deviceto configure the GC-100 on the Input/Output tab is:Type: EthernetCommunication Type: Global Cache GC-100.Refer to Configuring IR Outputs above.2. Not checking the RS-232 port for compatibility with the sub-system. The GC-100 has somelimitations that prevent it from working properly with all RS-232 devices. This includes a limit on baud and parity settings, among others. You should test your equipment with the GC-100 prior toinstallation to ensure communications are reliable.3. Not configuring and discovering the Global Cache before trying to configure a device with the GlobalCache serial ports. The Global Cache should be configured on the Input/Output tab before trying to configure a device to communicate using one of the GC-100 serial ports.。
信锐RS5300系列安视交换机产品彩页-SUNDRAY
信锐RS5300系列安视交换机产品彩页产品概述信锐RS5300-28T-4F产品是信锐自主研发的安视交换机。
安视交换机采用全新的系统架构设计，可以同瘦AP模式一样在无线AC上零配置上线管理，实现安视交换机的即插即用。
信锐安视交换机可以通过多种方式自动发现无线AC，通过无线AC即可对交换机进行配置管理，包括端口信息、VLAN、端口开启关闭等；可以通过无线AC进行可视化状态查看，包括交换机负载、端口转发负载、交换机在线离线状态、端口开启关闭状态等；还具备比传统交换机更安全的特性，同时可以与无线网络、安全设备进行联动实现更安全的网络管控。
信锐安视交换机RS5300-28T-4F 提供了28 个固定端口（24 个10/100/1000Base-T 固定端口、4 个万兆SFP+ 光口）。
RS5300 系列交换机在同类产品中处于领先地位，能够满足大型网络的组网需求，并具备丰富的智能和安全特性，特别适合于作为大型校园网、企业网、IP 城域网的接入设备。
产品规格RS5300-28T-4F规格信锐安视交换机规格书项目 RS5300-28T-4F外形尺寸（宽×深×440mm×260mm×44mm高）（mm）重量 ≤ 3.5KG固定端口 24 个10/100/1000Base-T 端口4 个万兆SFP+ 接口管理端口 1个Console口复位键 支持电源、风扇 内置电源、风扇整机最大功耗 ≤ 25W使用环境 工作温度：0°C～50°C存储温度：-40°C～70°C相对湿度：5%～90% RH 无凝结LED指示灯 端口指示灯， 系统状态指示灯以及电源指示灯交换容量 336Gbps/3.36Tbps包转发率 108Mpps/126Mpps接入方式 支持胖瘦一体化，支持安视交换机和普通交换机两种工作模式，可以根据不同的组网需要，随时灵活的进行切换交换机零配置上线方式 二层广播自动发现控制器配置静态IP地址三层发现控制器 DHCP Option43方式发现控制器 DNS域名发现控制器一键替换 通过控制器一键替换“按钮”即可完成故障设备替换 生成树 支持STP、RSTP、MSTP协议组播 支持IGMP v1/v2/v3 SnoopingVLAN 支持4K个VLANEEE 支持IEEE 802.3az 标准的 EEE节能技术：当EEE使能时，从而大幅度的减小端口在该阶段的功耗，达到了节能的目的。
DLINK网络摄像机DCS5300G产品说明书(实用)文档
DLINK网络摄像机DCS5300G产品说明书(文档可以直接使用，也可根据实际需要修改使用,可编辑欢迎下载）安全特警D-link DCS-5300G摄像机产品特点：•独立式网络摄影机•四倍Zoom In/Out 数位变焦•内建自动与手动式旋转镜头•内建麦克风收音，也可外接麦克风延伸收音范围•高质质MPEG-4压缩可得到30帧画面/秒的视频流•支持802.11g无线产品•利用Web 管理接口，可远程管理•支持DDNS与UPnP等网络环境，方便安装•配合监控软件可同时管理16台设备•配合储存设备可设定排程录像DCS-5300G 54M增强型无线网络摄像机【IT168评测室】D-link（友迅网络）推出的DCS-5300G 54M增强型无线网络摄像机是一款相当独特的产品。
它可以通过LAN或者WLAN的方式接入网络，用户通过互联网或者局域网进行远程监控和监听。
DCS-5300G 54M增强型无线网络摄像机包装盒DCS-5300G 54M增强型无线网络摄像机D-link DCS-5300G 54M增强型无线网络摄像机外观同我们常见的摄像头非常的相似，只是多了两根无线天线——从外型上我们很容易联想到科幻片中的机器人。
这款产品的做工相当的精致，银灰色和铁灰色亚光金属漆面使得其更富于现代感。
DCS-5300G内置较高品质的CCD传感器（1/4 英寸CCD）和标准CS嵌入式镜片的镜头（6.0mm, f1.8）。
根据D-link公布的资料显示，它可以产生高品质的30fps MPEG-4 的视频流。
所采集的视频数据可以可被存储到硬盘上，系统可以根据采集的视频数据进行分析从而实现动作感应来触发自动录制和自动的邮件告警通知。
DCS-5300G可以工作在自动摇镜模式和巡视模式下，在自动摇镜模式下，摄像机可水平旋转270度，巡视模式下，可周期性地轮流拍摄24个预设的位置。
通过Web界面可以直接对于摄像头进行控制，摇镜和倾斜的速率都均可调。
EMC_VNX5300维护手册
1VN*5300各指示灯详细位置介绍
1.1DPE指示灯
DPE前视图外观：
DPE指示灯状态详情：
1.2DPE后视图
1.3SPS指示灯说明
LED灯说明：
1.4磁盘阵列模块（DAE）视图及LED LED灯状态
后视图：
DEA电源交流模块：电源/冷却模块LED
1.5拔打拔打 EMC 全球响应中心全球响应中心 800 报
修
如用固定报修，请拔打8008190009
如用手机报修，请拔打4006700009
请依照语音提示进行报修
注意：必须事先准备好序列号，报修时需提供存储序列号，同时请提供具体的故障描述，如果部件故障，最好能提供故障部件的PartNumber （PN），特别是硬盘的 PN，以便于服务人员准确准备备件。
1.6收集日志
选择data.zip类型的文件，时间要和你收集日志的时间一样，选中后单击transfer，选择存放地址，最后单击OK。
同样的方法收集SPB的日志。
2019-6-6-存储单页2-阅读版
智能精简：存储资源的分配不再受存储物理空间大小的限制， 可实现按需分配，降低初期成本投入，大幅度提高存储资源 利用率。
智能缓存加速：支持SSD二级缓存，满足不同业务性能需求， 提高存储性能，消除复杂应用环境下的性能瓶颈。 智能本地复制：包括智能克隆，智能快照，智能备份三种保 护功能，可满足应用测试、开发、分析、备份等需求，并有 效节省存储空间，降低投资成本。 智能卷镜像：对映射给主机的卷创建一份镜像，当任意一份 复制数据损坏时，可提供不中断的应用IO访问。 智能分层：可以将热点数据在不同存储介质之间进行在线迁 移，实现存储成本和性能的最佳平衡，提高客户投资回报率。 智能服务保障：根据应用对IO性能要求不同，对卷的读写 性能进行动态管理，按需分配，满足不同应用的性能需求。 智能在线重删压缩：业界领先的基于时间的变长的实时在线 硬件重删压缩功能，先进的重删压缩算法带来更高的数据缩 减比例，并且对存储性能无影响。 智能异构虚拟化：可以来接管第三方的存储资源，形成统一 的虚拟资源池，并提供存储间的数据保护，数据迁移等服务。 智能容灾复制：提供同步、异步、异步周期三种容灾复制技 术，满足客户不同的RTO和RPO需求，保护业务连续性，同 时为客户提供两地三中心解决方案。 智能存储双活：浪潮G2活性存储能够提供跨 数据中心的双 活解决方案，实现RTO=0和RPO=0，数据零丢失，业务零 中断，保障客户业务的连续性。 智能云分层：业内独有的云分层技术，提供云缓存，云容灾， 云备份等功能，将云存储的高性价比和可扩展性与本地数据 中心架构相结合，帮助客户轻松实现数据在本地数据中心和 公有云之间的无缝流动。 智能管理软件：一套软件可以管理整个G2存储平台产品， 同时内嵌智能维护管理套件，降低运维成本，提高运维效率。
关键业务保障
S5300 系列交换机 产品彩页v1.0
Quidway® S5300系列全千兆交换机产品概述Quidway® S5300系列全千兆交换机（以下简称S5300），是华为公司为满足大带宽接入和以太网多业务汇聚而推出的新一代全千兆以太网交换机。
可为客户提供强大的以太网功能服务。
S5300基于新一代高性能硬件和华为公司统一的VRP®（Versatile Routing Platform）软件，具备大容量、高密度千兆端口，同时可提供万兆上行能力，可以充分满足客户对高密度千兆和万兆上行设备的需求。
S5300可满足运营商园区网汇聚、企业网汇聚、IDC千兆接入以及企业千兆到桌面等多种场合的需求。
S5300系列以太网交换机为盒式设备，机箱高度为1U，提供标准型（SI）和增强型（EI）两种产品版本。
标准型支持二层和基本的三层功能，增强型支持复杂的路由协议和丰富的业务特性，包含型号如下：S5324TP-SI/PWR-SI、S5328C-SI/EI、S5328C-PWR-SI/PWR-EI、S5328C-EI-24S、S5348TP-SI/PWR-SI、S5352C-SI/EI、S5352C-PWR-SI/PWR-EI。
产品外观S5300系列交换机包括如下款型：S5324TP-SI：24个10/100/1000Base-T, 4个千兆Combo口1000Base-X，分交流供电和直流供电两种机型, 支持RPS 12V冗余电源，支持USB口；S5324TP-SIS5324TP-PWR-SI：24个10/100/1000Base-T, 4个千兆Combo口1000Base-X, 交流供电，支持POE, 支持USB口；S5324TP-PWR-SIS5348TP-SI：48个10/100/1000Base-T, 4个千兆Combo口1000Base-X，分交流供电和直流供电两种机型，支持RPS 12V冗余电源，支持USB口；S5348TP-PWR-SI：48个10/100/1000Base-T, 4个千兆Combo口1000Base-X, 交流供电，支持POE, 支持USB口；S5348TP-SI/PWR-SIS5328C-SI：24个10/100/1000Base-T，4个千兆Combo口1000Base-X，上行2×10GE XFP插卡或者4×1000Base-X SFP，双电源，可插拔，支持USB口；S5328C-PWR-SI：24个10/100/1000Base-T，4个千兆Combo口1000Base-X，上行2×10GE XFP插卡或者4×1000Base-X SFP，双电源，可插拔，交流供电，支持POE, 支持USB口；S5328C-SI/PWR-SIS5352C-SI：48个10/100/1000Base-T，上行2×10GE XFP插卡或者4×1000Base-X SFP，双电源，可插拔, 支持USB口；S5352C-PWR-SI：48个10/100/1000Base-T，上行2×10GE XFP插卡或者4×1000Base-X SFP，双电源，可插拔，交流供电，支持POE, 支持USB口。
华东科技 Nytro XP6500 设备说明书
ST1860KN000 Accelerate read-intensive applications with up to 1.86TB flash storage on a full-
Additional Features
• Host offload architecture delivers PCIe flash performance without burdening host CPU and host memory • Instant recovery from power failure delivers highest uptime capability • Plug and play - no user intervention required • Non-destructive firmware upgrade doesn’t put valuable data at risk
Fedora: 17, 18
Ubuntu: 10.04, 11.1, 12.04, 14.04 LTS Windows: XP SP2, Windows7-SP1, 8, Windows Server:
2003 R2 SP2, 2008 R2-SP1, 2012 R2 SP1 Solaris 10U10, 11 (x86 & SPARC)
Nytro XP6200
Part Number Product Description Flash Memory Type
ST1796KN000 Accelerate read-intensive applications with up to 1.79TB flash storage on a half-
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
麒逸缓存加速系统
1.1. 麒逸BSCC-5300S缓存加速系统
BSCC-5300S
1.2. 产品价值
●创新独特的主动缓存加速模式，打破传统缓存的被动加速模式。
●BSCC-5300S缓存加速系统可以针对HTTP、在线视频、APP、音频、图
片、P2P等热点资源进行缓存，将缓存的资源保存在本地，让用户极速
上网。
●BSCC-5300S在提升用户上网体验的同时间接节省出口带宽。
●采用旁路方式部署，对网络无任何影响。
●一台硬件设备提供了资源缓存、加速、存储等功能，用户无需再增加其
他硬件成本。
●对于终端用户来说，设备是完全透明的，用户只会感觉到上网速度飞快。
●支持集中式、分布式、云模式三种部署模式。
1.3. 产品特性
加速特性：
◆支持至少258种常用HTTP扩展名文件的下载加速。
◆支持国内所有主流视频网站内的视频观看加速：优酷网、土豆网、乐视
网、爱奇艺、56视频、酷6视频、网易视频、凤凰视频、新浪视频、
腾讯视频、百度视频、CNTV网络电视、华数视频等。
PROPRIETARY & CONFIDENTIAL. 机密及专有。
ALL RIGHTS RESERVED. 版权所有，未经书面同意，不得转载。
◆支持视频切片缓存加速技术，智能合并视频重复资源。
◆支持常用下载软件加速：迅雷、快车、QQ旋风等。
◆支持移动终端APP文件下载加速：iOS、Android、Windows phone。
◆支持音频文件下载加速。
◆支持图片文件下载加速。
◆支持P2P下载加速。
主动加速特性：
◆支持热点资源主动预缓存。
◆支持将热点资源智能发布到资源集中平台，并以网站的模式主动推送
到用户桌面，引导用户主动点击。
云缓存特性：
◆支持多机分布式部署，实现缓存云。
◆支持从云端自动获取预缓存资源数据。
安全管理特性：
◆支持智能磁盘空间回收算法。
◆支持杀毒引擎模块，病毒库每天自动更新，确保数据安全。
◆支持版本和配置的备份、恢复、帐号权限分配、帐号登录日志查询。
1.4. 设备规格
PROPRIETARY & CONFIDENTIAL. 机密及专有。
ALL RIGHTS RESERVED. 版权所有，未经书面同意，不得转载。
1.5. 典型应用
部署模式：
旁路部署，对现有网络无任何影响。
部署场景：
运营商、大学、广电、教育局或具备大
并发量上网规模的单位。
部署后效果：
提升内网用户上网速度，节省出口带
宽。
扩容：
支持集群部署，支持超大规模用户。
PROPRIETARY & CONFIDENTIAL. 机密及专有。
ALL RIGHTS RESERVED. 版权所有，未经书面同意，不得转载。