空调说明书分析解析.doc

Hot water heat pump installation instructions

Thank you for using our Zhigao central air conditioners.

This instruction book is a general version of heat pump hot water machine from Zhigao.

The appearance of machine that you buy may be different from the instruction book we described. But it doesn’t matter for your operations.

Before you use it, please read the instruction book carefully and take care of it

The product you are using is air heat pump and water heater of Zhigao, it needs cleaning and maintaining periodically. If it is not done, the rate of breaking down would increase, and its life would reduce seriously; while if cleaned reasonably, the internal dust would be eliminated as result of improving indoor air quality, and reducing the power consumption.

To protect your legal rights, please install by qualified workers. .

The product you are using is heat pump and water heater of Zhigao. If it operates within a short time in winter, make sure charge for 24 hours a day; if not operates for a long time, be sure to draw off water in it, avoiding the unit’s cracking. Please contact with central air-conditioning management system center, Zhigao regularly, professionals will be sent with paying for checking, draining, adding water, adjustment and other cleaning and maintenance services. Just in case, air conditioner fails down.

Contents

1.Measures of safety precautions ………………………………………….. ……………

2.Choosing places of installing……………………………………………………………

3.Installation of units………………………………………………………………………

4.Installation of wanderled controller……………………………………………………

5.Electrical connection ………………………………………………………………

6.Test of units’ working ………………………………………………………………

7.Protection and maintenances………………………………………………

s of various part of unit and parameter……………………………………………

9.Instructions of unit function…………………………………………………………

10.Installation of available accessories………………………………………………

Closures chart 1 chart 2 chart 3

1.Measures of Safety Precautions

Warning

Dealer or qualified installer is needed.

Installers should be qualified, if install by themselves. Incorrect operations will result in fire, electric shock, injury and leakage.

If the accessories are purchased locally, they should be designated.

Using the specified product may cause fire accidents such as electric shock , leakage. For retails, professional installers are needed.

Power connections shall comply with the requirements of the local electric company.

By law, reliable grounding is needed. If the ground connection is imperfect, it may result in electric shock.

When the heat pump water heater needs to be moved or re-installed, contact your dealer or professional operators.

Improper installation will result in fire, electric shock, injury, leakage and other accidents. Don’t make repairs by yourself.

Improper repairs can cause fire, electric shock, injury, leakage and other accidents, be sure to ask your dealer or professionals for help.

Caution

1. Check the installation of leakage protection.

Leakage protection switch must be installed, if not, it may result in electric shock.

2.Connect the cable correctly.

If the cable is in the wrong way, it may damage the electrical components.

3.The unit can not be set in the combustibles (paint, gasoline, chemical reagents, etc.) near the

operation to prevent the risk of fire or explosion. If caught a fire, please immediately turn off the power and put the fire out with a fire extinguisher.

4.Don’t touch the refrigerant exhausting components to avoid being scalded.

According to the instructions, the unit is required regular maintained to ensure its working.

If the unit fails to work, please find the fault and eliminate it ,according to the manual of the "Fault Analysis and Troubleshooting", or contact central air conditioning product management center, identify and eliminate causes of malfunction before rebooting; Don’t do in the case of failure without forcibly boot .

5.If the refrigerant or water happens to leak, please immediately turn off all switches,; For

example, the unit can not be operated by the controller, you must turn off the main power to make it stop.

6.Please use the specified capacity fuse, do not use wire, copper wire instead , or it would caught a

fire.