TestInsideHP0-A01v3.92-1

合集下载

Profile

INNER LAYER INNER LAYER INNER LAYER INNER LAYER INNER LAYER INNER LAYER INNER LAYER INNER LAYER INNER LAYER INNER LAYER 1 2 3 4 5 6 7 8 9 10
No.232, Yung- Chang St, Ying-Ko, Taipei, Taiwan 239, R.O.C. Tel :886-2-2678-7966 Fax:886-2-2678-0160
Landrex Organization
President
LUATG
ATG Sales (LSH/LSZ)
Test Program
RDG
*Finance/Accounting *Personnel *Procurement
– CAF – CAM – Mechanical Process – Assembly – QC – Engineering Service (Field Application, Test Program, Test Library)
Taiwan Headquarters
( 66,670ft2 )
Landrex Shenzhen
( 13,068ft2 )
Philippines Rep.
No.232, Yung- Chang St, Ying-Ko, Taipei, Taiwan 239, R.O.C. Tel :886-2-2678-7966 Fax:886-2-2678-0160
No.232, Yung- Chang St, Ying-Ko, Taipei, Taiwan 239, R.O.C. Tel :886-2-2678-7966 Fax:886-2-2678-0160

HP ProLiant DL580 Gen9 用户手册(中文)

Microsoft® 和 Windows® 是 Microsoft Corporation 在美国和/或其它国家（地区）的注册商标或商标。
Intel® 和 Xeon® 是 Intel Corporation 在美国和其它国家（地区）的商标。
Linux® 是 Linus Torvalds 在美国和其它国家/地区的注册商标。
HPE ProLiant DL580 Gen9 服务器用户指南
摘要本文适合那些安装、管理服务器和存储系统以及对其进行故障排除的人员使用。 Hewlett Packard Enterprise 假定您有资格维修计算机设备，并经过培训，能够识别高压带电危险产品。
© Copyright 2015, 2016 Hewlett Packard Enterprise Development LP
2 操作 ................................................................................................................................................................. 19 打开服务器电源 .................................................................................................................................. 19 关闭服务器电源 .................................................................................................................................. 19 将服务器从机架中取出 ....................................................................................................................... 19 将服务器从机架中拉出 ....................................................................................................................... 20 卸下检修面板 ...................................................................................................................................... 21 安装检修面板 ...................................................................................................................................... 22 卸下 SPI 板 ......................................................................................................................................... 22 安装 SPI 板 ......................................................................................................................................... 23

贴片F系列三极管参数

Base I I N C N N X K N N D N N N N N B N N N N N N N N X N N N N N N N N N N N B P X P ZB X ZB
Package SCD80 URD SOT323 SOT23 SC59 SC59 SOT23 SOT23 SOT23 SOT23 SOT23 SOT23 SOT23 SOT23 SOT23 SOT323 SC59 SC59 SOT23 SC59 SC59 SC59 SC59 SOT23 SC59 SC59 SOT23 SC59 SC59 SC59 SC59 SC59 SOT23 SOT89 SOT89 SOT23 SOT23
Leaded Equivalent/Data uhf varicap 2.5-22pf npn RF fT 8GHz 35V RF pin sw diode npn dtr R1 2k2 40V 100mA npn dtr R1 4k7 40V 100mA fT 12GHz npn RF 4V 12mA 35V RF pin sw diode BF495 RF npn fT 150MHz hfe30-60 dual series HP3820 pin sw diode BF184 BF494 BF184 BF494 BF184 BF494 RF npn fT150MHz hfe60-120 BF495 dual cc HP3820 pin sw diode BF184 BF494 pnp dtr 1k + 1k 50V 500mA pnp dtr 2k2 + 2k2 50V 500mA pnp dtr 4k7+ 4k7 50V 500mA pnp dtr 4k7+ 4k7 50V 500mA pnp dtr 10k + 10k 50V 500mA fT 12GHz npn 6V 20mA npn dtr 1k + 1k 50V 500mA npn dtr 2k2 + 2k2 50V 500mA npn dtr 4k7 + 4k7 50V 500mA npn dtr 4k7 + 4k7 50V 500mA npn dtr 10k + 10k 50V 500mA pnp dtr 2k2 + 10k 50V 100mA pnp dtr 2k2 + 10k 50V 100mA npn dtr 2k2 + 10k 50V 100mA pnp dtr R1 2k2 40V 100mA pnp dtr R1 4k7 40V 100mA pnp dtr R110k 40V 100mA 0.5-3GHz cc pin dual anode npn RF 1.5GHz 300mA BFQ69 npn RF Ft 5.5GHz 100mA microproc -ve reset gen 2.700V BFW92 microproc -ve reset gen 2.800V

电脑主板纠错灯指示信息及含义

现在(xiànzài)很多人买的主板都带有DEBUG侦错灯,借此把搜集回来的DEBUG侦错灯指示信息及其含义;拿来共享下........CF 测试(cèshì) CMOS R/W 功能性。

C0 早期的主板设定初始值: - 禁用(jìn yònɡ) shadow RAM - 禁用 L2cache(SURPER 7 构架及后期兼容构架) - 检测基本 chipset 寄存器。

C1 检测内存: -Auto- 检测DRAM（动态随机存取储存器）大小，类型(lèixíng) 和 ECC。

-Auto- 检测L2 cache (SURPER 7 构架及后期兼容构架)C3 映射(yìngshè)BIOS编码到DRAM。

C5 允许chipset将BIOS复制到地址为E000 F000的shadow RAM。

01 将Xgroup编码定位在内存地址中的1000到003 初始化Superio（超级输入输出）_Early（响应）_Init（启动）开关。

053.将空白输出到荧屏。

4.清除CMOS错误。

071.清除 8042 接口。

2.初始化 8042接口自检。

081.检测特殊的键盘控制器型号为Winbond 977 系列超级I/O（输入／输出）芯片。

2.允许使用键盘接口。

0A1.禁用PS/2 老鼠接口.(可选)2.在端口和交换接口检测完成后自动检测键盘和鼠标端口。

(可选)3.重置键盘在发现型号为Winbond 977 系列超级I/O输入／输出芯片后。

0E 检测内存地址为F000h段图像以证明是否它支持 R/ W.如果检测失败，机箱扬声器将发出警报。

10 自动检测FlashROM类型以读取合适的FlashROM R/W 编码。

在ESCD和DMI支持的情况下进入运行时间和区域的地址位F000。

12 使用步骤1’s 运算方式以确定CMOS电路的接口。

Testinside题库优惠中,HP0 - S27考试指南分享

HP0-S27考试资料Implementing HP BladeSystem Solutions科目编号：HP0-S27科目名称：Implementing HP BladeSystem Solutions相关：Partner FundamentalsTestinside题库价格：￥280.00HP0-S27 考试是HP 公司的Implementing HP BladeSystem Solutions 认证考试官方代号，Implementing HP BladeSystem Solutions 认证作为全球IT领域专家HP 热门认证之一，是许多大中IT企业选择人才标准的必备条件。

Hp认证：HP certificationThe HP Certified Professional community is a network of qualified HP channelpartners, customers, and employees who have taken the courses and studiedthe associated reference material necessary to pass the certification exams thatearn HP Certified Professional credentials. The exams offered through the HPCertified Professional program validate the skills and assure the competency ofHP certified professionals. The knowledge and experience required to pass HPcertification exams ensure that HP certified professionals are respected andvalued throughout the industry.HP0-S27考试考生要求：AudienceThis exam is for system engineers or technicians who require in-depthunderstanding of the technologies deployed in HP BladeSystem Solutions.Examples of job roles include:HP Authorized Service PartnersHP customer IT staffSystems E ngineersHP Solution ArchitectsHP Technical Client ConsultantHP Services Support EngineersHP0-S27考试细节：The following are details about the exam:Number of items: 65Item types: multiple choice, drag-and-drop, point-and-clickExam Time: 105 m inutesPassing Score: 70%Reference Material: No on-line orHP0-S27考试大纲：6% Industry standard server technologies used in HP BladeSystem solutionsDescribe processor technologiesDescribe system architectureExplain networking concepts and techn ologiesDescribe high availability concepts and technologiesRecognize and describe blade architectureIdentify current OS and virtualization solutions supported by HP15% HP BladeSystem products and solutionsIdentify and describe HP BladeSystem p roducts, technologies and processesDescribe health and fault management tools and technologiesIdentify and describe HP BladeSystem rack infrastructure solutionsIdentify and describe I/O connectivity optionsIdentify and describe HP storage optio nsIdentify and describe HP clustering solutionsIdentify and describe HP BladeSystem management solutions5% Planning and designing an HP BladeSystem solutionList the physical and environmental requirements needed to deploy the solutionDesign, s ize and validate a solution23% Installing and configuring an HP BladeSystem solutionInstall the rack and its accessoriesInstall and configure BladeSystem infrastructureInstall/attach HP external storageConfigure server blade and related option sInstall HP supported operating systemInstall and configure management softwareValidate, test and document a BladeSystem Solution5% Performance-tune and optimize an HP BladeSystem solutionIdentify the performance management processSet perfo rmance thresholdsCheck for known performance issuesReestablish new baseline14% Troubleshooting and repair/replacement proceduresGather troubleshooting informationEvaluate data to determine problemDevelop an action planExecute the planTest if fault has been resolved using appropriate toolsImplement preventive measures by taking necessary steps to insure the problem does not reoccur15% HP BladeSystem solution managementConfigure HP Systems Insight ManagerConfigure HP Systems I nsight ManagerImplement service essentials (Insight Remote Support)12% HP BladeSystem administrative, operational, and upgrade tasksManage and maintain hardware componentsManage and maintain firmware and driversManage and maintain operating s ystemPerform system upgradesImplement the appropriate fault management solutions5% HP Service offeringsIdentify and describe HP BladeSystem standard warrantiesIdentify and describe HP Care PacksIdentify and describe additional service offer ings最新活动：Testinside考题大师权威微软，思科，太阳，CIW的中，IBM的公司，北电网络，惠普，甲骨文等各大的资讯科技认证题库，最新考题售价仅180元起。

惠普i900型系列扫描仪ISIS驱动程序的扫描设置指南说明书

i900 型系列扫描仪ISIS 应用程序的扫描设置指南ISIS 驱动程序的扫描设置指南内容“扫描验证工具”对话框 (2)配置影像设置 (4)主要选项卡 (6)布局选项卡 (8)扫描区域对话框 (9)影像处理选项卡 (10)滤色选项卡 (12)调整选项卡 (13)填满影像边缘选项卡 (14)空白页检测选项卡 (15)配置扫描仪设置 (16)扫描仪选项卡 (17)重张进纸检测选项卡 (18)关于选项卡 (19)柯达 ScanMate i900 型系列扫描仪提供可利用影像处理功能来处理已扫描影像以改善其质量的功能。

影像处理是指允许您自动调整各个影像以改善所产生影像的扫描仪功能（例如，纠正已送进文档的任何偏斜、剪切影像的边缘以去除任何不需要的边框，或清除影像上多余的“噪音”）。

本指南中的信息提供关于使用 ISIS 驱动程序的操作程序以及功能说明。

您使用的扫描应用程序的用户界面上应提供相同的功能。

“扫描验证工具”对话框“扫描验证工具”(SVT) 是由柯达提供的诊断应用程序。

SVT 用户界面可以让您访问扫描仪的所有功能，并且也是检查扫描仪是否正确操作的最好方式。

“扫描验证工具”使您能够使用 ISIS 驱动程序验证扫描仪功能。

工具栏按钮设置 - 显示所选定驱动程序的用户界面。

目的地 - 可以让您选择用于存储扫描的影像及其文件名的目录。

此选项只可有在选择保存影像到文件时可用。

开始扫描 - 扫描输入托盘中的文档。

扫描一页 - 仅扫描一页。

停止扫描 - 结束扫描工作阶段。

许可密钥 - 显示“许可密钥”窗口。

“无图显示”模式 - 关闭“影像浏览器”窗口（将不会显示影像）。

“单图显示”模式 - 一次显示一个影像。

“双图显示”模式 - 一次显示两个影像。

“四图显示”模式 - 一次显示四个影像。

“八图显示”模式 - 一次显示八个影像。

关于 - 显示“扫描验证工具”的版本。

保存影像到文件 - 如果选择此选项，会将影像保存到指定的目录。

HP 打印机说明书

DimensionsW x D x H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .660 mm x 650 mm x 725 mm ( 26 in x 26 in x 29 in)Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 kg (227 lb)Operating EnvironmentTemperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 – 35 °C Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 – 80%, non-condensing Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3048 m (10,000 ft) max Heat Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4092 BTU/h Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200 VA max Power Input Requirements . . . . . . . . . . . . . . . . . . . .100 – 240 V ~, 50 – 60 Hz User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Integrated LCD touchscreen Adapter/Ports■■Ethernet on RJ45 port ■■RS232 on DB9 port■■External DVI-I connectors (with VGA)■■ 6 External USB portsLiquid Waste Handling■■ 2 external waste bottles (5 L each)■■Can be connected to a laboratory drain Printing Options■■On-screen result review ■■Electronic printing to PDF ■■External printer (available)Required Maintenance■■Empty waste bottles (as needed)■■Clean surfaces, touchscreen, and racks (as needed)■■Perform the Clean System procedure (2 minute automated process, every 30,000 tests)LIS Speciﬁ cations■■Bi-directional capability with broadcast download of test orders ■■Option to add patient demographics to printed results ■■LIS result output with option to include comment record ■■Chromatogram PDF can be sent automatically to a network folderD-100™ HbA 1c Elution Buffer A Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2600 mL Number of Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 1100 tests per bottle Storage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 – 35°C Onboard Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 bottles D-100™ HbA 1c Elution Buffer B Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1400 mL Number of Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 3000 tests per bottle Storage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 – 35°C Onboard Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 bottles D-100™ Wash Solution Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3300 mL Number of Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 1100 tests per bottle Storage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 – 35°C Onboard Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 bottles D-100™ HbA 1c Analytical CartridgeNumber of Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,000Storage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 – 8°C Onboard Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 cartridge D-100™ HbA 1c Calibrator Pack Calibration Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .once per cartridge Storage Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 – 8°C D-100™ Preﬁ ltersNumber of Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,000Storage Requirements . . . . . . . . . . . . . . . . . . . . . .2 – 8°C, 120 days at 15 – 35°C Onboard Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 preﬁ lterGeneral Specifi cationsConsumable SpecificationsHbA1c Testing for DiabetesD-100™ Hemoglobin Testing SystemFor further information, please contact the Bio-Rad office nearest you or visit our website at /diagnosticsClinical Diagnostics Group Web site /diagnostics USA 180****6723Australia 61 2 9914 2800 Austria 43 1 877 8901 Belgium 32 03 710 53 00Brazil 55 31 3689 6600 Canada 151****4372China 86 21 61698500 Czech Republic 420 241 430 532 Denmark 45 4452 1000 Finland 358 9 804 22 00 France 33 1 47 95 60 00 Germany 49 0 89 318 840 Greece 30 210 7774396 Hong Kong 852 2789 3300 Hungary 36 1 459 6100 India 180****1224 Israel 972 3 9636050 Italy 39 02 216091 Japan 81 3 6361 7070 Korea 82 2 3473 4460 Mexico 52 55 5488 7670 The Netherlands 31 318 540666 New Zealand 64 9 415 2280 Norway 47 23 38 41 30 Poland 48 22 3319999 Portugal 351 21 472-7700 Russia 7 495 721 1404 Singapore 65 6415 3170 South Africa 27 11 442 85 08 Spain 34 91 590 5200 Sweden 46 8 555 127 00 Switzerland 41 0 26 674 55 05 06 Taiwan 886 2 2578 7189Thailand 662 651 8311 United Kingdom 44 0 20 8328 2000Bio-RadLaboratories, Inc.© 2016 Bio-Rad Laboratories, Inc. Printed in USA DG16-0012 A-318 Rev. 07/2016Printed on recycled paperwith soy-based inksD-100™ Hemoglobin Testing SystemSample Handling SpecificationsSample Throughput . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 tests/hour Time to First Result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 minutes, 15 seconds Sample Analysis Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 seconds Sample Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .None required Sample Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 samples, continuous loading Stat Area Sample Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 samples (primary tube or microvial) Minimum Sample Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 mL (13 x 75 mm primary tube) Specimen Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Whole blood, capillary** Whole Blood Sample Aspiration Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 μL Prediluted Sample Aspiration Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .495 μL Acceptable Sample Tube Types■■K2-EDTA■■K3-EDTA■■Potassium Oxalate/Sodium Fluoride■■Sodium Citrate ■■Sodium Heparin ■■Lithium HeparinSupported Barcode Symbologies■■Code 39■■Code 128■■Codabar■■Interleaved 2 of 5■■EAN■■UPCPerformance SpecificationsTotal Precision* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≤1 .7% CV (NGSP units) Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Total Error <6% Linear Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .5% – 20% HbA1c Minimum QC Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Once per day Sample Concentration Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50,000 – 350,000 mAU HbA1c Units Reported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IFCC and NGSP Hemoglobin Interferences■■No interference from hemoglobins S, C, D, or E ■■No interference from fetal hemoglobin up to 30%■■No interference from labile HbA1c■■No interference from carbamylated hemoglobin* Total precision is based on a 3-instrument, 60-day precision study using 3 lots of reagents to generate a total of 720 data points per sample . It includes the following sources of variation: within-run (repeatability), between-run, between-day, between-instrument, and between-lot .** Not available in US for the capillary collection kit .。

欧特佳数字无线系统ODWS-1用户手册说明书

Thank you for purchasing the Ortega DIGITAL WIRELESS SYSTEM. Please read this manual carefully before using this product. Keep the manual for future reference.ORTEGADIGITAL WIRELESS SYSTEM ODWS-1Important Safety Instructions CAUTIONThis equipent has been tested and found to comply with the limits for a Class B digital device pursuant to part 15ŁThis device may not cause harmful interference of FCC rules.Operation is subject to the following two conditions: łThis device must accept any interference received including interference that may cause undesired operation.WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT DISASSEMBLE . NO USER-SERVICEABLE PARTSWARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THEAPPLIANCE TO RAIN OR MOISTURE.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENINSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.CAUTION This equipent has been tested and found to comply with the limits of a Class B digital device pursuant to part 15 of FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference (2) This device must accept any interference received including interference that may cause undesired operation.interference by one or more of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TVtechnician for help.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that the receiver is connected to.- Consult your dealer or an experienced radio/TV technician for help.1.Observe all instructions carefully in the O2 manual.2.Do not to perform service operations beyond those described in the O2 Manual. Services required when the apparatus has been damaged in any way, such as: is dropped or the enclosure is damaged3.Do not place near heat sources, such as radiators,heat registers, or appliances which produce heat.4.Guard against objects or liquids entering the device. Do not use or place unit near water.5.Clean only with a damp cloth.6.Only use attachments/accessories specified by themanufacturer.WARNING: BEFORE USING YOUR B-BIRD O2DIGITAL WIRELESS SYSTEM,CAREFULLY READ THE OPERATINGINSTRUCTIONS.IMPORTANT SAFETY INSTRUCTIONSPLEASE THESE INSTRUCTIONS IN A SAFE PLACEORTEGA 1.Observe all instructions carefully in the manual.2.Do not perform service operations beyond those described in the manual. Service is required when the apparatus has been damaged in any way, such as:-Liquid has been spilled over or objects have fallen into the apparatus-The unit has been exposed to rain or moisture-The unit does not operate normally or changes in performance are significant.- The unit is dropped or the enclosure is damaged 3.Do not place near heat sources, such as radiators, hot plates, or appliances which produce heat. 4.Prevent objects or liquids from entering the device. Do not use or place the unit near water.5.Clean only with a damp cloth.6.Only use attachments/accessories specified by the manufacturer. STOREPRODUCT INTRODUCTIONB-BIRD O2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20 Hz - 20K Hz frequency response, so you’ll hear your guitar tone in great detail with only 5ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 100 feet of range without any signal dropout. The li-ion batteries help makes the O2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the B-BIRD O2 system. It’ll declutter the stage and offers freedom in motion7.Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening.”7.Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening.” The ORTEGA DIGITAL WIRELESS SYSTEM features digital wireless technology delivering incredible audio quality, a simple setup, and is extremly reliable for any gigging musician. It supports a full 20Hz-20kHz frequency range, so you will hear your guitar tone in great detail. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covering 100 feet of range without any signal dropout. The li-ion batteries make the ORTEGA DIGITAL WIRELESS SYSTEM environmentally friendly. It can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the issues of touring and the harshest climates. This wireless system is a perfect fit to any pedal board thanks to its simplistic and compact design. Go wireless with the ORTEGA DIGITAL WIRELESS System. It will declutter the stage and offer a higher freedom of movement.PRODUCT INTRODUCTIONQUICK START DIAGRAM 1.Transmitter plugs into the Guitar (you instruments),the receiver plugs into the effects pedal, AMP, Audio, etc.2.Turn on the Transmitter and the receiver, the A B C D LED will indicate how much volume of the battery, each LED means about 25% of the battery volume. for example,if A B C D LED all light on,it means about 100% full volume left,and the like if only A LED lights on means about 25% of the battery volume left. if the A LED turn red and flashing,it means the batteryororQUICK START DIAGRAM1.Prepare: Transmitter is plugged into the Guitar (your instrument), the receiver is connected to your effect pedal, AMP, Audio, etc.2. LED indication: Turn on the transmitter and the receiver. The four LEDs: A, B, C and D indicate the battery life with each LED standing for about 25% of the power left. For example: If the four LEDs all light up, it 100% of the battery charge is left. Ifonly the A LED lights up, about 25% of the battery charge is left. If the A LED turns red and flashes, the battery is low and needs to be charged.is in low volume and you have to charge.3.Channel choosing,O2 systems’pre-set channel is 3.Charging, put the USB plug into the transmitter and channel A,after showing battery volume the A LED will flash,it indicates making pairs,if transmitter and receiver connected successfully the channel LED will stop flashing and turn solid green. if environment interuption happens, you can click the “C” button to choose receiver meanwhile, the A B C D LED will light on orderly according to the batteries’ volume. another channel. 3. Channel Selection: The system‘s preset channel is channel A. After indicating the battery life, the A LED will flash. If the transmitter and the receiver are connected successfully the channel LED ( of the channel you have selected) will stop flashing and turns solid green. If there is an interruption through the environment, you can click on the “Channel” button to choose another channel.4. Charging: Put the micro USB plugs into the transmitter and receiver. After that, hook up the standard USB end with a energy souce like your PC or a powerbank. While charging the four LEDs will all light up indicating the status of the overall battery charge.1.Power – Slide Switch to turn on/off TRANSMETER/RECEIVER BASIC OPERATION2.Channel Select - Align TRANSMITTER and RECEIVER channels.1. Power – Slide Switch to turn on/off TRANSMITTER/RECEIVER2. Channel Select - Align TRANSMITTER and RECEIVER channels.BASIC OPERATION4.Transmitter Audio signal indicator LED 3.Battery LED and Channel LEDWhen Power is on, the A LED will flash toindicate the pre-set channel is A.Click the switch to select the channel Follow the diagram below to set up the channel , meanwhile the audio signal indicator LED will flash O2 syetem at first power on,the lighting LED number indicate the battery volume,if 3 LED light on,it means 3*25%=75% battery volume left.The A LED have 2 function,one is channel A,the other is turn to red flashing in low volume and have to be charged.to indicate the channel.AB CD Click the switch to select a channel (A B C or D).Follow the diagram below to set up the channel. The audio signal indicator LED will flash to indicate the selected channel.Q & A Four channels The O2 wireless guitar system has four different channels, and can use up to 4 pair of systems at the same time. When your band plays for guitar, bass, keyboard and other instruments, O2 can set up different channels for them to prevent signal interference. When there is only one player, thedifferent channel function can also be used for him/her to prevent interferences from different frequency bands of routers or other WIFI devices. Generally we recommend to use Channel APortable Plug-and- Play design O2 wireless system uses a portable design; both the receiver and the receiver are plug-and-play design. It is very convenient for fast switching among guitar, bass, amplifiers, effect pedal and other audio equipments. It provides more flexibility in adjusting the equipments.One Transmitter and multiple Receivers When using a transmitter, you can use multiplereceivers. For example, if you want to connect a guitarQ & AFour channelsThe ORTEGA DIGITAL WIRELESS SYSTEM has four different channels and can operate with 4 active pairs of systems at the same time. When your band uses several pairs for guitar, bass, keyboard and one other instrument, you can set up 4 different channelspreventing signal interferences. When there is only one player, the different channel function can also be used to prevent interferences from different frequency bands of routers or other WIFI devices. Generally we recommend to use Channel A.Portable Plug-and-Play design The ORTEGA DIGITAL WIRELESS SYSTEM features a portable format; both the transmitter and the receiver are designed for plug-and-play. The system is very convenient for fast switching among guitar, bass, amplifiers, effect pedals and other audio equipment. One Transmitter and multiple ReceiversWhen using a transmitter, you can use multiple receivers. For example: If you want to connect a guitarto two amplifiers or connect to effect pedal and pedal tuner, you need just use multiple receivers with setting up to be the same channel.O2 Receiver Since O2 is the 2.4 GHz wireless system, please avoid putting the receiver close to other signal emitting devices. It is recommended that your O2 receiver keep a distance of more than 3 meters from the other 2.4 GHz transmitter and WIFI router.Auto sleep/wake up mode The auto sleep/wake up mode will start when over 10 seconds there is still on signal input,it make you more silent when you stop playing,meanwhile, it also help you to save the battery volume.Power charge There is a “Y” shape cable in the package. It can charge the transmitter and receiver at the same time.The voltage output is 5V. The channel A LED never turn to red for normal use. Red A LED light flashing means low battery which requires immediate power charge.to two amplifiers, you just need to use multiple receivers being set to the same channel as your transmitter.ReceiverAs the system is working with 2.4GHz, please avoid putting the receiver close to other signal emitting devices. It is recommended that your receiver keeps a distance of more than 3 meters from other 2.4GHz transmitters and WIFI routers.Auto sleep/wake up modeThe auto sleep/wake up mode will activate when there is no signal input for over 10 seconds. On the one hand this feature cuts the signal and prevents you from unwanted noise on stage and on the other hand it also helps you to save battery life.Power charge You find a “Y” shaped cable in the package. It can charge the transmitter and receiver at the same time. The voltage output is 5V. The channel A LED never turns to red during normal use. If the A LED light is flashing this means low battery life which requires immediate power charge.or need more distance for using, you can change the antenna's angle and adjust it to be the best condition.Supportive pickup and musical instrument O2 wireless system can works for passive guitar and active pickup, piezoelectric acoustic guitar pickup, piezoelectric violin pickup. Transmitter is better to connect to the instrument.Please avoid connecting it to distortion effect pedal or high power output interface which may incur the timbre B port USB only works for charging function, does not support firmware upgrade.Being confronted with interferrence from other devices or needing a higher reach on stage, you can change the antenna's angle and adjust it to the best condition.Pickups and preamp systems The ORTEGA DIGITAL WIRELESS SYSTEM works with passive and active electronics, piezoelectric acoustic guitar pickups and piezoelectric violin pickups. Please connect the transmitter directly to your instrument. Avoid connecting it to distortion/overdrive pedals or high power output interfaces.USB USB only works for charging the battery and does not support firmware upgrades.Ortega - a brand of Roland Meinl Musikinstrumente GmbH & Co. KG | Musik-Meinl-Str.1 | 91468 Gutenstetten, Germany | 。

如何申请 iLO3 的试用版本 License 以及如何在服务器上激活

HP ProLiant DL380 G7 服务器- 如何申请iLO3的试用版本License 以及如何在服务器上激活问题HP ProLiant DL380 G7 服务器如何申请iLO3的试用版本License ，如何在服务器上激活。

解决方案1. 打开HP 官方主页，点击Large Enterprise Business ，点击Servers。

2. 在Related Products项目下，点击HP Insight software。

3. 在Individual Products 项目下，点击Integrated Lights-Out (iLO)。

4. 在Product Information项目下，点击iLOAdvanced。

5. 点击Free trial。

6. 出现登陆的界面，如果没有账户，请先注册。

7. 新用户注册，点击New users - please register。

界面中带有星号选项都需要填写。

然后完成注册，生成新帐户。

8. 使用注册好的账户登陆，出现了申请License 的地方。

点击选中iLO Advanced ,这个就是我们要申请的iLO 3 的试用版License。

图中2个红色圈标注的方框都打勾，说明我们已经阅读并接受了协议，点击Next 。

9. 点击Get Software ，下载License。

10. 点击下载按钮，把文件下载到本地。

11. 点击保存按钮。

NOTE:如果点击下载按钮没有弹出保存界面，多尝试点击几次。

本次演示共点击2次才出现保存界面。

12. 打开下载的iLO_Adv_Evaluation_Keys_091108.doc 文档，看到的License key:就是我们需要的。

13. 得到免费的License key后，需要注册才可使用登陆iLO3点击Administration ，点击Licensing 输入License key ，点击Install 点击OK。

西部数据HP 33120A波形生成器说明书

HUncompromising performance for standard waveformsThe HP 33120A function/arbitrary waveform generator uses direct digital-synthesis techniques to create a stable, accurate output signal for clean, low-distortion sine waves. It also gives you fast rise-and fall-time square wave, and linear ramp waveforms down to10mHz.Custom waveform generationUse the HP 33120A to generate complex custom waveforms such as a heartbeat or the output of a mechanical transducer. With 12-bit resolution, and a sampling rate of 40MSa/s, the HP 33120A gives you the flexibility to create any waveform you need. It also lets you store up to found 16,000-deep waveforms in nonvolatile memory. Easy-to-use functionalityFront-panel operation of theHP33120A is straightforward and intuitive. You can access any often major functions with a single key press or two, then use a simple knob to adjust frequency, amplitude and offset. To save time, you can enter voltage values directly in Vp-p, Vrms or dBm. Internal AM, FM,FSK and burst modulationmake it easy to modulatewaveforms without theneed for a separatemodulation source.Linear and log sweeps arealso built in, with sweeprates selectable from 1msto 500s. HP-IB and RS-232interfaces are both standard,plus you get full programmabilityusing SCPI commands.Optional phase-lock capabilityThe Option 001 phase lock/TCXOtimebase gives you the ability togenerate synchronized phase-offsetsignals. An external clockinput/output lets you synchronizewith up to three other HP 33120Asor with an external 10-MHz clock.Option 001 also gives you aTCXO timebase for increasedfrequency stability. With accuracyof 4 ppm/yr, the TCXO timebasemake an HP 33120A ideal forfrequency calibrations and otherdemanding applications.With Option 001, new commandslet you perform phase changes onthe fly, via the front panel or from acomputer, allowing precise phasecalibration and adjustment.Link the HP 33120A to your PCTo further increase yourproductivity, use the HP 33120A inconjunction with HP 34811ABenchLink Arb software. TheWindows®-based program lets youcreate and edit waveforms on yourPC and download them to yourHP33120A with the click of a mouse.Create complex waveforms in amath or statistics program--or usethe freehand drawing tool--then passthem into HP BenchLink Arb. Use inconjunction with HP BenchLinkScope, the software also lets youcapture a waveform with your HPoscilloscope or DMM and send it toyour HP 33120A for output.3-year warrantyWith your HP 33120A, you getoperating and service manuals, aquick reference guide, test date,and a full 3-year warranty, all forone low price.HP 33120A Function/ArbitraryWaveform GeneratorCreate custom waveforms easily and affordably • 15 MHz sine and square wave outputs• Sine, triangle, square, ramp, noise and more• 12-bit, 40MSa/s, 16,000-point deep arbitrary waveforms • Direct Digital Synthesis for excellent stabilityWaveformsStandard Sine, square, triangle,ramp, noise, sin(x)/x,exponential riseexponential fall, cardiac,dc volts.ArbitraryWaveform length8 to 16,000 points Amplitude resolution12 bits (including sign) Sample rate40 MSa/sNon-volatile memory Four (4) 16,000 waveforms Frequency CharacteristicsSine100 µHz - 15 MHz Square100 µHz - 15 MHz Triangle100 µHz - 100 kHz Ramp100 µHz - 100 kHz White noise10 MHz bandwidth Resolution10 µHz or 10 digits Accuracy10 ppm in 90 days,20 ppm in 1 year,18°C - 28°CTemp. Coeff< 2 ppm/°CAging< 10 ppm/yr Sinewave Spectral PurityHarmonic distortiondc to 20 kHz-70 dBc20 kHz to 100 kHz-60 dBc100 kHz to 1 MHz-45 dBc1 MHz to 15 MHz-35 dBcSpurious (non-harmonic)DC to 1 MHz< -65 dBc1 MHz to 15 MHz< -65 dBc + 6 dB/octave Total harmonic distortionDC to 20 kHz<0.04%Phase noise<-55 dBc in a 30 kHz band Signal CharacteristicsSquarewaveRise/Fall time< 20 nsOvershoot4%Asymmetry1% + 5nsDuty cycle20% to 80% (to 5 MHz)40% to 60% (to 15 MHz) Triangle, Ramp, ArbRise/Fall time40 ns (typical) Linearity<0.1% of peak output Setting Time<250 ns to 0.5% offinal valueJitter<25nsOutput CharacteristicsAmplitude (into 50Ω)50 mVpp - 10 Vpp [1]Accuracy (at 1 kHz)±1% of specified outputFlatness (sinewave relative to 1 kHz)< 100 kHz±1% (0.1 dB)100 kHz to 1 MHz±1.5% (0.15 dB)1 Mz to 15 MHz±2% (0.2 dB) Ampl≥3Vrms±3.5% (0.3 dB) Ampl<3VrmsOutput Impedance50Ω(fixed)Offset (into 50Ω) [2]+ 5 Vpk ac + dcAccuracy±2% of setting + 2 mVResolution 3 digits, amplitude andoffsetUnits Vpp, Vrms, dBmIsolation42 Vpk maximum to earthProtection Short circuit protected±15Vpk overdrive < 1 minuteModulationAMCarrier -3dB Freq.10 MHz (typical)Modulation any internal waveformincluding ArbFrequency10 mHz - 20 kHzDepth0% - 120%Source Internal/ExternalFMModulation any internal waveformincluding ArbFrequency10 mHz - 10 kHzDeviation10 mHz - 15 MHzSource Internal onlyFSKInternal rate10 mHz - 50 kHzFrequency Range10 mHz - 15 MHzSource Internal/External(1 MHz max.)BurstCarrier Freq. 5 MHz max.Count 1 to 50,000 cyclesor infiniteStart Phase-360°to +360°Internal Rate10 mHz - 50 kHz ±1%Gate Source Internal/External GateTrigger Single, External orInternal RateSweepType Linear or LogarithmicDirection Up or DownStart F/Stop F10 mHz - 15 MHzSpeed 1 ms to 500 s ±0.1%Trigger Single, External, or InternalRear Panel InputsExt. AM Modulation±5 Vpk = 100% modulation5kΩinput resistanceExternal Trigger/TTL low trueFSK/Burst GateSystem Characteristics[3]Configuration Times[4]Function Change:[5]80 msFrequency Change:[5]30 msAmplitude Change:30 msOffset Change:10 msSelect User Arb:100 msModulation ParameterChange:<350 msArb Download Times over HP-IBArb Length Binary ASCII Integer ASCII Real[6]16,000 points8 sec81 sec100 sec8,192 points 4 sec42 sec51 sec4,096 points 2.5 sec21 sec26 sec2,048 points 1.5 sec11 sec13 secArb Download Times over RS-232 at 9600 Baud:[7]Arb Length Binary ASCII Integer ASCII Real[8]16,000 points35 sec101 sec134 sec8,192 points18 sec52 sec69 sec4,096 points10 sec27 sec35 sec2,048 points 6 sec14 sec18 sec[1] 100 mVpp - 20 Vpp into open circuit[2] Offset ≤2x pk - pk amplitude[3] Times are typical. May vary based on controllerperformance[4] time to change parameter and output the new signal.[5] Modulation or sweep off.[6] Times for 5-digit and 12-digit numbers.[7] For 4800 baud, multiply the download times by two;For2400 baud, multiply the download times by four, etc.[8] Time for 5-digit numbers. For 12-digit numbers, multiplythe 5-digit numbers by two.2Option 001 Phaselock/TCXO TimebaseTimebase AccuracySetability< 0.01 ppmStability±1 ppm 0°- 50°Aging< 2ppm in first 30 days(continuous operation)0.1 pm/month(after first 30 days)External Reference InputLock Range10 MHz ±50 HzLevel-10 dBm to + 15 dBm+25 dBm or 10 Vpp maxinputImpedance50Ω±2%, 42 Vpk isolationto earthLock Time< 2 secondsInternal Reference OutputFrequency10 MHzLevel> 1 Vpp into 50 ΩPhase OffsetRange+ 360°to - 360°Resolution0.001°Accuracy25 nsTrigger OutputLevel5V zero-going pulse Pulse Width> 2µs typicalFanout Capable of driving up tothree 33120AsOrdering InformationHP 33120A Function/Arb GeneratorOpt. 001 Phase Lock/TCXO Timebase OptionGeneralPower Supply110V/120V/220V/240V ±10% Power Line Frequency45 Hz to 66 Hz and 360 Hzto 440 HzPower Consumption50VA peak (28 W average) Operating Environment0°C to 55°CStorage Environment-40°C to 70°CState Storage Memory Power Off stateautomatically saved, 3 UserConfigurable Stored States Interface IEEE-488 and RS-232standardLanguage SCPI - 1993, IEEE-488.2 Dimensions (W x H x D)Bench top254.4mm x 103.6mm x374mmRack mount212.6mm x 88.5mm x348.3mmWeight 4 kg (8.8 lbs)Safety Designed to UL-1244, CSA 1010,EN61010EMC Tested to MIL-461C, EN55011,EN50082-1Vibration and Shock MIL-T-28800, Type III,Class5Acoustic Noise30 dBaWarm-up Time 1 hourWarranty3 years standard3Ordering InformationHP 33120A Function/Arbitrary Waveform GeneratorAccessories includedOperating manual, service manual, quick reference guide, test data, and power cord.OptionsOpt. 001Phase lock/TCXO timebaseOpt. 106HP BenchLink Arb software (HP 34811A)Opt. 1CM Rack Mount Kit (P/N 5062-3972)*Opt. W50Additional 2-year warranty (5-year total)Opt. 910Extra manual setManual language options (please specify one)ABA US English ABD German ABE Spanish ABF French ABJ Japanese ABZ ItalianABO Taiwan Chinese AB1 KoreanAccessoriesHP 34161A Accessory pouchHP 34811A BenchLink Arb software*For racking two side-by-side, order both items below Lock-link Kit (P/N 5061-9694)Flange Kit (P/N 5062-3974)HData subject to change.Printed in the U.S.A. 8/98© Hewlett-Packard Company 1998Windows is a registered trademark of Microsoft Corporation.5968-0125ENFor more information about HP’s waveform generators and all other Hewlett-Packard basic instruments, and for a current sales office listing, visit our web site at /go/tmdir.You can also contact one of the following centers and ask for a test and measurement sales representative.United States:Hewlett-Packard CompanyTest and Measurement Call Center P.O. Box 4026Englewood, Colorado 80155-4026180****4844Canada:Hewlett-Packard Canada Ltd.5150 Spectrum Way Mississauga, Ontario L4W 5G1(905) 206 4725Europe:Hewlett-PackardEuropean Marketing Centre P.O. Box 9991180 AZ Amstelveen The Netherlands (31 20) 547 9900Japan:Hewlett-Packard Japan Ltd.Measurement Assistance Center 9-1, Takakura-Cho, Hachioji-Shi,Tokyo 192, Japan Tel: (81) 426 56 7832Fax: (81) 426 56 7840Latin America:Hewlett-PackardLatin American Region Headquarters 5200 Blue Lagoon Drive 9th FloorMiami, Florida 33126U.S.A.Tel: (305) 267-4245(305) 267-4220Fax: (305) 267-4288Australia/New Zealand:Hewlett-Packard Australia Ltd.31-41 Joseph StreetBlackburn, Victoria 3130Australia 1 800 629 485Asia Pacific:Hewlett-Packard Asia Pacific Ltd.17-21/F Shell Tower, Times Square,1 Matheson Street, Causeway Bay,Hong KongTel: (852) 2599 7777Fax: (852) 2506 9285。

VX16s All-in-One Controller User Manual

VX16sAll-in-One ControllerV1.0.0User ManualXI'A N NOVA S T AR T E C HCO .,LT D.Change HistoryX I'A NN OV AS TA RT EC HC O.,L TD.ContentsChange History ........................................................................................................................................ i 1 Overview ............................................................................................................................................. 1 2 Appearance ......................................................................................................................................... 2 Front Panel (2)2.1 Rear Panel .................................................................................................................................... 3 2.23 Applications ......................................................................................................................................... 5 4 Home Screen ...................................................................................................................................... 6 5 Menu Operations ................................................................................................................................. 8 Screen Brightness ......................................................................................................................... 8 5.1 Screen Settings .. (8)5.25.2.1 Quick configuration ........................................................................................................................................ 8 5.2.2 Loading RCFGx Files ..................................................................................................................................... 9 5.2.3 Save to RV Card ........................................................................................................................................... 11 5.2.4 Advanced Configuration ................................................................................................................................ 11 5.2.5 More Settings ............................................................................................................................................... 12 Layer Settings (13)5.35.3.1 Main Layer and PIP ...................................................................................................................................... 13 Input Settings . (14)5.45.4.1 Input Source Selection ................................................................................................................................. 14 5.4.2 Input Resolution Settings ............................................................................................................................. 15 5.4.3 DVI Mosaic ................................................................................................................................................... 16 5.4.4 RGB Limited to RGB Full ............................................................................................................................. 17 Display Control ............................................................................................................................ 17 5.5 Preset Settings ............................................................................................................................ 18 5.6 Image Mosaic .............................................................................................................................. 19 5.7 Advanced Settings .. (19)5.85.8.1 Hot Backup .................................................................................................................................................. 19 5.8.2 Synchronization ............................................................................................................................................ 19 5.8.3 FN ................................................................................................................................................................ 20 5.8.4 Advanced Functions . (20)5.8.4.1 3D Mode .................................................................................................................. 20 5.8.4.2 Self-Test ................................................................................................................... 20 5.8.5 Output Frame Rate ...................................................................................................................................... 21 5.8.6 Return to Home ............................................................................................................................................ 21 5.8.7 Factory Reset ............................................................................................................................................... 21 5.8.8 About Us ...................................................................................................................................................... 21 Partial Reset ................................................................................................................................ 21 5.9 Communication Settings (21)5.105.10.1 Communication Mode ................................................................................................................................ 21 5.10.2 Network Settings ........................................................................................................................................ 22 Language .. (22)5.116 Specifications .................................................................................................................................... 23 A Instructions for the 3D Function .. (24)XI'A N NOVA S T AR T E C HCO .,LT D.A.1 For a Single VX16s Unit (24)A.2 For Multiple VX16s Units (24)A.3 Notes (25)X I'A NN OV AS TA RT EC HC O.,L TD.1 OverviewThe VX16s is NovaStar’s new all-in-one controller that integrates video processing, video control and LED screen configuration into one unit. Together with NovaStar’s V-Can video control software, it enables richer image mosaic effects and easier operations.The VX16s supports a variety of video signals, Ultra HD 4K×2K@60Hz image processing and sendingcapabilities, as well as up to 10,400,000 pixels.Thanks to its powerful image processing and sending capabilities, the VX16s can be widely used inapplications such as stage control systems, conferences, events, exhibitions, high-end rental and fine-pitch displays.X I'A NN OV AS TA RT EC HC O.,L TD.2 AppearanceFront Panel2.1.,LT D.Rear Panel2.2.The HDMI source and DVI Mosaic source can be used by the main layer only.X I'A NN OV AS TA RT EC H3 ApplicationsThis product can only be worked horizontally. Wall mounting is not permitted.X I'A NN OVA RT EC HC O.,L TD.4 Home ScreenFigure 4-1 Home screenThe layer is active and the layer input source name and resolution aredisplayed.The layer is inactive.The VX16s is in video controller mode and this Ethernet port isconnected.This Ethernet port is not connected.This Ethernet port is connected and serves as the backup output port.Resolution and frame rate of the configured screenScreen brightnessThe Genlock function is turned on.The Genlock function is turned off.The Genlock function is being turned on.Failed to turn on the Genlock function.The LED screen is displaying a black screen.The LED screen is displaying the selected test pattern. N NOVA S R T E C HCO .,LT D.The LED screen is displaying the current input source. The output image is frozen.The BKG function is turned on.The BKG function is turned off.The VX16s is communicating with the control PC via USB. The VX16s is communicating with the control PC via LAN. The VX16s is not connected to the control PC.X I'A NN OV AS TA RT EC H5 Menu OperationsKnob :On the home screen, press the knob to enter the main menu screen.On the main menu screen, rotate the knob to select a menu item, and press the knob to confirm the selectionor enter the submenu.When a menu item with parameters is selected, you can rotate the knob to adjust the parameters. Press the knob again after adjustment to apply your settings. ESC : Exit the current menu or cancel an operation.Screen Brightness5.1 You can adjust the screen brightness in an eye-friendly way according to the current ambient brightness. Besides, appropriate adjustment of screen brightness can extend the service life of the LED screen. Figure 5-1 Screen brightnessStep 1 Press the knob to enter the main menu screen.Step 2 Select Screen Brightness and press the knob to confirm the selection.Step 3 Rotate the knob to adjust the brightness value. You can see the adjustment result on the LED screen in realtime. Press the knob to apply the brightness when you are satisfied with it.Screen Settings5.2 You can configure your screen to make it display the whole image correctly.Quick Configuration and Advance Configuration are provided and you can choose any of the options to configure your screen.5.2.1 Quick configuration Prerequisites● The LED screen must be a regular screen.● Cabinets of the screen must be regular cabinets with the same resolution.● The following data flow patterns are supported. The physical connection of each Ethernet port must bealong the same direction and downward to the next one.XI'A N NOVA S T AR T E C HCO .,LT D.Ethernet port 1 must be always at the beginning of the whole physical connection.Operating ProcedureStep 1 Power on the LED screen.Step 2 On the home screen, press the knob to enter the main menu screen. Then rotate the knob to choose ScreenSettings > Quick Configuration and press the knob to enter the quick configuration screen.Figure 5-2 Quick configurationStep 3 Set Cabinet Row Qty and Cabinet Column Qty according to the actual row and column quantities of thecabinets. Step 4 Rotate the knob to select Port 1 Cabinet Qty and set the quantity of the cabinets loaded by Ethernet port 1. Step 5 Rotate the knob to select Data Flow (Front View) and press the knob, then select an appropriate data flowpattern of the cabinets.During data flow settings, you can see the result on the LED screen in real time. If the entire screen displays content correctly, that is, no overlapping or repetition, press the knob to save the settings.5.2.2 Loading RCFGx FilesAfter the LED screen is powered on, if a cabinet or the entire LED screen is not lit, you can load the receivingcard configuration files (namely RCFGx files) that have been configured in NovaLCT to the VX16s.Step 1 (Optional) After you have configured the screen in NovaLCT, click Save to File under the Receiving Card tabto save the configuration file to the PC.XI'A N NOVA S T AR T E C HCO .,LT D.Figure 5-3 Saving receiving card configuration filesStep 2 Choose Tools > Controller Cabinet Configuration File Import to enter the controller cabinet configurationfile importing page.Figure 5-4 Importing controller cabinet configuration filesStep 3 Click Add Configuration File to select the target file (*.rcfgx/*.rcfg) from your PC, and then click Open . Step 4 Click Save the Change to HW to send the configuration files to the VX16s.XI'A N NOVA S T AR T E C HCO .,LT D.Figure 5-5 Saving changes to the VX16sThe configuration files for irregular cabinets are not supported.5.2.3 Save to RV CardYou can send and save the screen configuration to the receiving card. The configuration data will not be lost after the VX16s is powered off.5.2.4 Advanced ConfigurationYou can set the cabinet row and column quantities, horizontal offset, vertical offset and data flow of thecabinets loaded by a single Ethernet port.Operating ProcedureStep 1 Press the knob to enter the main menu screen.Step 2 Rotate the knob to choose Screen Settings > Advanced Configuration, and press it to enter the advanced configuration screen.Step 3 Turn on the advanced configuration function, and then set the cabinet row and column quantities, horizontal offset, vertical offset and data flow.Figure 5-6 Advanced configurationX I'A NN OV AS TA RT EC O.,L TD.5.2.5 More SettingsStep 1 Press the knob to enter the main menu screen.Step 2 Rotate the knob to choose Screen Settings > More Settings, and then press the knob to enter the submenu, including Mapping and LED Screen Color.MappingYou can turn on this function to display the sequence numbers of Ethernet ports and cabinets.Figure 5-7 MappingExample: "P:05" stands for the Ethernet port number and "#001" stands for the cabinet number.The receiving cards of the screen must support the Mapping function. You can check the types of receivingcards on NovaStar’s official website (www.novastar.tech).LED Screen ColorYou can adjust the screen color and the adjustment result will be displayed on the LED screen in real time.Table 5-1 Screen color parametersFigure 5-8 Color temperaturesXNN OA RT EC HC O.,L TD.Layer Settings5.3Step 1 Press the knob to enter the main menu screen.Step 2 Rotate the knob to select Layer Settings and press the knob to enter the layer settings screen where you can set the following.●Main layer●PIP 1 and PIP 25.3.1 Main Layer and PIPFigure 5-9 Layer settingsE C HC O.,L TD.Figure 5-10 Layer parameter descriptionFigure 5-11 Input cropInput Settings5.4 5.4.1 Input Source SelectionThe supported input sources include HDMI, SDI and DVI.Rotate the knob to select the desired input source and press the knob to enter the input source resolutionsetting screen.Only one interlaced SDI input is supported in the mosaic mode of four DVI connectors.XI'A N NOVA S T AR T E C HCO .,LT D.Figure 5-12 Input source selection5.4.2 Input Resolution SettingsThe following two methods are provided to set the input resolution:● Standard resolution ● Custom resolutionFigure 5-13 Choosing a resolution setting methodThe SDI input source does not support resolution settings.Standard ResolutionChoose a standard resolution and frame rate. Then rotate the knob to select Apply and press the knob toapply your settings.Figure 5-14 Standard resolutionTable 5-2 Standard resolutions XI'A N NOVA S T AR T E C HCO .,LT D.Custom ResolutionRotate the knob to set a custom width, height and frame rate. Then rotate the knob to select Apply and pressthe knob to apply your settings. If you do not press the knob to confirm, the settings will not take effect. Figure 5-15 Custom resolution5.4.3 DVI MosaicStep 1 Rotate the knob to choose Input Settings > DVI .Step 2 Adjust the resolutions of DVI 1, 2, 3 and 4 together. For the adjustment procedure, see 5.4.2 InputResolution Settings .XI'A N NOFigure 5-16 DVI 1/2/3/4 resolution settingsStep 3 Rotate the knob to select DVI MOSAIC and press the knob to enter the DVI mosaic settings menu.DescriptionChoose a mosaic layout for DVI connectors 1– 4. Seven mosaic layouts are available:,,,,,,.Step 4 Rotate the knob to set the MOSAIC Backup mode.● Part: When one or multiple DVI sources in the DVI mosaic group are abnormal, these sources are notdisplayed and other DVI sources are displayed normally. ● Group: When one or multiple DVI sources in the DVI mosaic group are abnormal, the backup device willtake over the primary device to output the image. • Only one interlaced SDI input is supported in the mosaic mode of four DVI connectors.•Mosaic Backup is set to Part by default. In device backup mode, please set Mosaic Backup to Group for the primary device to ensure that the output image can be displayed normally.5.4.4 RGB Limited to RGB FullThe VX16s can automatically convert the color space of the video source from RGB limited to RGB full,allowing for more accurate video processing.● Off: Don’t convert the color space of the current video source from RGB limited to RGB full.● On: Convert the color space of the current video source from RGB limited to RGB full. You are advised toturn on this function when the color space of the video source is RGB limited.Display Control5.5 This function is used to verify whether the LED display works properly. You can make the screen go black, freeze the screen, let the screen display test patterns or the content of an input source normally.● Normal: Display the content of the current input source normally. ● Freeze: Freeze the current frame of the output image.XI'A N NT ACO .,LT D● FTB: Make the screen go black.● Test Pattern: Test the display performance and working status of the LED screen. Options on this menuinclude Pure Color , Gradient , Grid , Brightness , Spacing and Speed .● Image Color: Adjust the color of the output image. You can see the adjustment result on the LED screen inreal time.Table 5-3 Image color parametersPreset Settings5.6 The VX16s supports 10 presets. Users can save, load and clear the configured presets.Step 1 Rotate the knob to select Preset Settings and press the knob to enter the preset settings screen.Step 2 Rotate the knob to select the desired preset and press the knob. In the dialog box that appears, four presetoperation options are provided: Save , Load , Clear or Copy To .Figure 5-17 Preset operations● Save: Save the settings of the current layer to the target preset. ● Load: Load the layout settings of the selected preset to the current layer. ● Clear: Clear all the contents in the selected preset.● Copy To: Copy the layout settings of the current preset to the target preset.If the target preset contains data, the Copy To operation will overwrite its original data.XI'A N NOVA S T AR T E CImage Mosaic5.7 The image mosaic function is required when the resolution of an LED screen is greater than the loadingcapacity of a single VX16s unit. The total pixels loaded by all linked VX16s units equals the total resolution of the LED screen.Figure 5-18 Image mosaic parametersExample: If the resolution of the LED screen is 7680×4320 which exceeds the loading capacity of a single VX16s unit, four VX16s units will be required together for image mosaic. Table 5-4 Parameter settingsAdvanced Settings5.8 5.8.1 Hot BackupYou can set the VX16s as the primary device or backup device. The data flow patterns in both the modes arethe same.● Set as Primary: The icon of the target Ethernet port on the home screen is highlighted.● Set as Backup: The icon of the target Ethernet port on the home screen is highlighted and a small triangleappears on the bottom right of the icon.When the primary device fails, the backup device will take over the work in real time.5.8.2 SynchronizationSelect a synchronization signal to synchronize all the linked VX16s units and keep the display of the outputimages of all the units in sync.Step 1 Rotate the knob to select Synchronization and press the knob to enter the submenu. Step 2 Rotate the knob to set the synchronization status and source.● Status: Turn on or turn off this function. It defaults to Off . ● Source: Select the target input source.XI'A N NOVCO .,LT D.5.8.3 FNThe FN button on the front panel can be customized as a shortcut for the Synchronization (default), Freeze ,FTB , Quick Configuration or Color function.5.8.4 Advanced FunctionsAdvanced functions include 3D mode and self-test settings.5.8.4.1 3D ModeThe VX16s can work with the EMT200 3D emitter and 3D glasses to provide you with 3D visual experience.• Turning on 3D mode halves the device output capacity.•To enable pixel-to-pixel display of a 3D video source, set the layer width to the half of the resolution width of the 3D source if the source is side-by-side, or set the layer height to the half of the resolution height of the 3D source if the source is top-and-bottom.Figure 5-19 Hardware connectionsStep 1 Complete the hardware connections as shown in Figure 5-19.Step 2 Rotate the knob to choose Advanced Functions > 3D Mode > Status to turn on the function.Step 3 Select the 3D format of the video source. The options include Side-by-Side , Top-and-Bottom and FrameSequential . Step 4 Set the eye priority according to the mode of the 3D glasses. The options include Left and Right . Step 5 Select More Settings to complete the following settings.● Right Eye Start ● Signal Delay Time ● Third-Party TransmitterFor more detailed operating procedure of the 3D function, see A Instructions for the 3D Function .5.8.4.2 Self-TestWhen the VX16s fails, you can test it yourself and send the test result to NovaStar.XI'A N NOVA S T AR T E C HCO .,5.8.5 Output Frame RateYou can set the output frame rate of the image output by the Ethernet ports. It defaults to 60 Hz. The providedoptions include 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 47.95 Hz, 48 Hz, 50 Hz, 56 Hz, 59.94 Hz, 60 Hz, 70 Hz, 71.93 Hz, 72 Hz, 75 Hz, 85 Hz, 100 Hz, 119.88 Hz and 120 Hz.5.8.6 Return to HomeYou can set the period of time during which the system stays at the current page before returning to the homepage automatically when there is no operation performed. The default time is 60s and the maximum value is 3600s.5.8.7 Factory ResetYou can reset all user data to factory settings.5.8.8 About UsYou can view the following information.● Device hardware version ● Official website● Email (*********************)Partial Reset5.9 After partial reset, the name you set, loaded RCFGx files, preset parameters, IP address and subnet mask are kept while other parameters are all reset to the factory defaults.Communication Settings5.10 5.10.1 Communication ModeThe VX16s is connected to the PC via USB port and Ethernet port at the same time. The communicationmodes include USB Preferred and LAN Preferred . Figure 5-20 Communication mode● When USB Preferred is selected, the VX16s communicates with the PC via USB port by preference.XI'A N NOVA S T AR T E C HCO .,LT D.●When LAN Preferred is selected, the VX16s communicates with the PC via Ethernet port by preference.5.10.2 Network SettingsThe methods for network settings include Manual and Auto.●Manual: Set the device IP address and subnet mask manually.●Auto: The device reads the network parameters automatically.●Reset: Reset the parameters to defaults.Figure 5-21 Network settings•When the VX16s communicates with the control PC, they must be on the same LAN.•The IP addresses of the VX16s and the control PC cannot be the same.Language5.11The VX16s is available for Chinese and English. You can choose your desired language.X I'A NN OV AS TA RT EC HC O.,L TD.6 SpecificationsX I'A NN OV AAInstructions for the 3D FunctionA.1 For a Single VX16s UnitStep 1 Select a 3D video source and connect it to the DVI or HDMI connector of the VX16s unit.Step 2 Connect the VX16s unit to the EMT200 3D emitter and the LED screen in series via Ethernet cables. Thenpower on the EMT200 and turn on the shutter 3D glasses that come with the EMT200. Step 3 Configure the screen. Please note that turning on the 3D mode will halve the output loading capacity of asingle Ethernet port and the whole unit. Step 4 Select the 3D video source format. Select Side-by-Side , Top-and-Bottom or Frame Sequential according tothe actual video source format. Step 5 Adjust the eye priority. Since the left and right eye image switching manner of the video source may not be insync with your shutter 3D glasses, you need to adjust the eye priority according to actual visual effect after the 3D mode is turned on. The default option is Left . Step 6 Adjust the right eye start.● For a side-by-side 3D video sourceIf the resolution of the video source is 1920×1080@60Hz, set the right eye start to 960. If the resolution of the video source is 3840×1080@60Hz, set the right eye start to 1920. In conclusion, it is recommended you set the right eye start to the half of the video source width.● For a top-and-bottom 3D video sourceIf the resolution of the video source is 1920×1080@60Hz, set the right eye start to 540. If the resolution of the video source is 3840×1080@60Hz, set the right eye start to 540. In conclusion, it is recommended you set the right eye start to the half of the video source height.● For a frame-sequential 3D video source, you do not need to adjust this parameter.Step 7 Adjust the signal delay to keep the left-right eye switching of the 3D glasses and the LED screen in sync. It isrecommended you adjust the signal delay according to the actual visual effect after the 3D mode is turned on. Step 8 Turn on the 3D mode. Then only the main layer is kept and other layers are closed.Step 9 Wear your 3D glasses to enjoy the 3D effect. No matter how the main layer size or position is adjusted, the 3Deffect will not be affected at all.A.2 For Multiple VX16s UnitsStep 1 Select a 3D video source and connect it to the DVI or HDMI connectors of all the VX16s units.Step 2 Connect all VX16s units to the LED screen via Ethernet cables, and connect the EMT200 to one of the unitsvia an Ethernet cable. Then power on the EMT200 and turn on the shutter 3D glasses that come with the EMT200. Step 3 Configure the area of the screen loaded by each unit. Please note that turning on the 3D mode will halve theoutput loading capacity of a single Ethernet port and the whole unit. Step 4 Set the image mosaic parameters of each unit, which will not be detailed in this document.Step 5 Select the 3D video source format for all the units. Select Side-by-Side , Top-and-Bottom or FrameSequential according to the actual video source format. Set the same video source format for all the units. Step 6 Adjust the eye priority for all the units. Since the frame-sequential manner of the video source may not be insync with your shutter 3D glasses, you need to adjust the eye priority according to actual visual effect after the 3D mode is turned on. The default option is Left . Set the same eye priority for all the units. Step 7 Set the same right eye start for all the units.● For a side-by-side 3D video sourceIf the resolution of the video source is 1920×1080@60Hz, set the right eye start to 960. If the resolution ofXI'A N NOVA S T AR T E C HCO .,LT D.。

ScanDIMM-SO204 DDR3 Boundary-Scan Based Digital Te

ScanDIMM-SO204/DDR3Boundary-Scan BasedDigital TesterUser's ManualDocument Part Number: 70405 Revision ACopyright © Corelis 2010. All rights reserved.Corelis12607 Hiddencreek WayCerritos, CA 90703-2146Telephone: (562) 926-6727Fax: (562) 404-6196Table of ContentsChapter 1: Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features of the ScanDIMM-SO204/DDR3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ScanDIMM-SO204/DDR3 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Chapter 2: ScanDIMM-SO204/DDR3 Installation. . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 OverviewScanDIMM-SO204/DDR3 Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ScanDIMM-SO204/DDR3 Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting to the Boundary-Scan Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Indicator LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mating Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 AccessoriesChapter 3: Preparation of Test Input Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PreparationAdd the ScanDIMM BSDL File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Add BSDL Files Dialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 TAP Pins Not Found in Netlist Warning (Safe to Ignore). . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Insert a TAP Break. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Testing the Socket Power and Ground Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Chapter 4: Executing Selftest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Infrastructure Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 StepsChapter 5: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 OverviewNotes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Chapter 6: Legal and Contact Information. . . . . . . . . . . . . . . . . . . . . . . . . . . 14Chapter 1:Product Overview IntroductionThe ScanDIMM-SO204/DDR3 Digital Tester module provides an easy-to-use method for structurally testing 204-pin Small Outline Dual Inline Memory Module (SO-DIMM or SODIMM) sockets. Through the use of boundary-scan technology, theScanDIMM-SO204/DDR3 Digital Tester provides 196 fully bi-directional test signals. A Boundary-Scan Test Access Port (TAP) connects to a host computer, which provides virtually unlimited memory depth for testing each of the SO-DIMM socket pins. The 204-pin sockets are often used for Double Data Rate Dynamic Random Access Memory (DDR3 SDRAM) modules. The ScanDIMM-SO204/DDR3 offers an accurate and easy-to-use mechanical and electrical solution for connecting test equipment to SO-DIMM sockets.Features of the ScanDIMM-SO204/DDR3•Tests 204-pin DDR3 SO-DIMM sockets•Tests for opens on the socket's power and ground pins• 1.5V DIMM interface, 3.3V tolerant• 1.8V TAP interface, 3.3V tolerant•LEDs indicate power status and active TAP connection•Compatible with the Corelis ScanExpress boundary-scan test development tools and other third party softwareThe figure below shows the ScanDIMM-SO204/DDR3 module with Pin 1 of the TAP IN connector identified.Figure 1-1. ScanDIMM-SO204/DDR3 module (top view)ScanDIMM-SO204/DDR3 SpecificationsSize and Form FactorMechanical Compatibility JEDEC MO-268C (204-pin DDR3 SO-DIMM)Dimensions67.6 mm x 30.00 mm ± 0.15 mm[2.66 inches x 1.18 inches ± 0.01 inches]PCB thickness 1.00 mm ± 0.10 mm[0.039 ± 0.01 inches]Connector Keying 1.5V-compatibleMaximum Test Clock (TCK) FrequencyMaximum TCK Frequency25 MHzLEDsPWR Indicates the 1.5V power source is presentTAP ON Indicates the TAP is connectedTAP ConnectorsTAP IN Connector10-pin Single Row 0.100-inch spacing(Samtec part no. TSM-110-01-G-SH or equivalent) Power Requirements (Provided by the 204-pin mating socket)1.50 V0.250 A (Maximum)Operating EnvironmentTemperature0° C to 55° CRelative Humidity10% to 90%, non-condensingAbsolute Maximum RatingsTable 1-1. Absolute Maximum RatingsRecommended Operating ConditionsTable 1-2. Recommended Operating ConditionsDC Electrical Characteristics (SO-DIMM Socket Interface)(1.5V DC Over Recommended Operating Conditions)Table 1-3. DC Electrical Characteristics (SO-DIMM Socket Interface)DC Electrical Characteristics (JTAG Interface)(1.8V DC Over Recommended Operating Conditions)Table 1-4. DC Electrical Characteristics (JTAG Interface)Chapter 2:ScanDIMM-SO204/DDR3 Installation OverviewTo ensure reliable operation of the ScanDIMM-SO204/DDR3, it is important to connect it properly to both the Corelisboundary-scan controller and the 204-pin DDR3 SO-DIMM socket on the unit under test (UUT).ScanDIMM-SO204/DDR3 HardwareThe ScanDIMM-SO204/DDR3 product consists of the following components:•ScanDIMM-SO204/DDR3, Corelis P/N 10408•User's Manual, Corelis P/N 70405•Host Adapter Cable, 10-pin, Corelis P/N 15336The ScanDIMM-SO204/DDR3 product is also available in a 'mirrored' version that is functionally identical but has a reversed form factor.The ScanDIMM-SO204/DDR3/Mirrored product consists of the following components:•ScanDIMM-SO204/DDR3/Mirrored, Corelis P/N 10409•User's Manual, Corelis P/N 70405•Host Adapter Cable, 10-pin, Corelis P/N 15336The files related to the ScanDIMM-SO204/DDR3 are installed by the ScanExpress installer.Ensure that all materials listed are present and free from visible damage or defects before proceeding. If anything appears to be missing or damaged, contact Corelis at the number listed on the title page immediately.The figure below shows the ScanDIMM-SO204/DDR3 and the cables that are included with the product.Figure 2-1. ScanDIMM-SO204/DDR3 and Cable AccessoriesScanDIMM-SO204/DDR3 SoftwareThe ScanExpress CD installs the files to a subdirectory of the ScanExpress TPG application.The default location is:"C:\Program Files\Corelis\ScanExpressTPG\ScanDIMM-SO204-DDR3".Table 2-5. ScanDIMM-SO204/DDR3 FilesConnecting to the Boundary-Scan ControllerThe external boundary-scan controller connects to the ScanDIMM-SO204/DDR3 TAP IN connector via the 10-pin Host Adapter Cable.Connect one end of the Host Adapter Cable P/N 15336 to the TAP IN connector of the ScanDIMM-SO204/DDR3.Connect the 10-pin cable from the boundary-scan controller (ScanTAP-4, ScanTAP-8, etc.) to the other end of the adapter cable. The TAP Voltage for the boundary-scan controller should be set to 1.8VThe figure below shows a block diagram for the a typical TAP connection to a ScanDIMM-SO204/DDR3 module.Figure 2-2. Block Diagram of Connection to a ScanDIMM-SO204/DDR3This table shows the pin assignments for the TAP IN connector.Table 2-6. TAP IN Connection ListThe TAP IN connector conforms to the popular Corelis 10-pin TAP connector pinout except that it is a single row (10 x 1) instead of dual row (5 x 2). The Host TAP Adapter Cable P/N 15336 is a 1:1 adapter cable. The pin assignment is standard, connecting to any Corelis controller using the appropriate standard 10-pin TAP cable. It is best to use the PCI-1149.1/Turbo equipped with a ScanTAP-4 Intelligent Pod, with one TAP connected to the ScanDIMM-SO204/DDR3 and with additional TAP(s) connected to the UUT. Other Corelis controllers like the NetUSB-1149.1/E can also be used so that the UUT can connect on a separate TAP.The figure below shows the TAP connections for a ScanDIMM-SO204/DDR3 module on TAP1 and the Target UUT on TAP2.Figure 2-3. Connection of a ScanDIMM-SO204/DDR3 Module and the Target using Separate TAPs Indicator LEDsTwo LEDs indicate the status of the ScanDIMM-SO204/DDR3 module. D1 is labeled PWR. It illuminates if theScanDIMM-SO204/DDR3 is receiving power from the target (through pins 57, 60 and 176). If the LED is not illuminated, the ScanDIMM-SO204/DDR3 module is not powered up. D2 is labeled TAP ON. It indicates that a connection to a controller is detected. The ScanDIMM-SO204/DDR3 module will not operate unless D2 is illuminated.Mating ConnectorsThe table below shows the mating connectors needed to make cables for the Boundary-Scan connector.Table 2-7. Mating Connectors for the ScanDIMM-SO204/DDR3 AccessoriesAdditional TAP Adapter Cables (P/N 15336) can be ordered from Corelis:Table 2-8. Cable Accessories for the ScanDIMM-SO204/DDR3Chapter 3:Preparation of Test Input Files OverviewThe ScanDIMM-SO204/DDR3 integrates easily with a boundary-scan test plan. When the ScanDIMM-SO204/DDR3 is installed in a socket, the socket behaves like a boundary-scan component. Once the ScanDIMM-SO204/DDR3 is plugged into the socket on the target board, the boundary-scan test system will automatically test the socket. However, regeneration of the boundary-scan tests with ScanExpress TPG is required.PreparationCopy the provided BSDL file to your local project directory.Add the ScanDIMM BSDL FileWhile in the "Preparation:BSDL Files" stage of ScanExpress TPG, click "Add..." to launch the "Add BSDL Files" dialog.Figure 3-1. ScanExpress TPG Test Preparation: Select BSDL FilesAdd BSDL Files DialogFigure 3-2. Add BSDL Files DialogUncheck the box "Show Only Devices Connected to JTAG Signals"Select the Device that corresponds to the DIMM socket on the board in the left pane.Select the BSDL File for the ScanDIMM-SO204-DDR3 in the right pane.Click "Add".Click "Close" to exit the Add BSDL Files dialog.TAP Pins Not Found in Netlist Warning (Safe to Ignore)In some cases a popup message may appear that indicates that the ScanDIMM TAP pins are not found in the netlist. The TAP connection between the boundary-scan controller and ScanDIMM module won't be in the board netlist and this warning is safe to ignore.Figure 3-3. TAP Pins Not Found in Netlist Warning (Safe to Ignore)Insert a TAP BreakThe ScanDIMM is now in the scan chain. Insert a "TAP Break" by selecting the last device in the scan chain before the ScanDIMM, right clicking and selecting "Insert TAP Break"Figure 3-4. ScanExpress TPG Test Preparation: ScanDIMM BSDL File AddedTesting the Socket Power and Ground PinsTo test the power and ground pins on the ScanDIMM-SO204/DDR3 socket, the constraint file should have the following syntax added:SENSE_HIGH VDDSENSE_LOW GNDVDD and GND are the net names of the 1.5V SDRAM power and ground signals on the target board. This syntax may already be present to test other power or ground connections in the target system.ScanExpress TPG will automatically add these constraints if the power and ground nets are specified during the Power and Ground screen of the preparation phase.Chapter 4:Executing Selftest OverviewScanExpress Runner (sold separately) can load and run the compact vector file, ScanDIMM-SO204-DDR3_Selftest_inf.cvf, and quickly verify that the ScanDIMM-SO204/DDR3 is functional. Both the ScanExpress Runner software and a Corelis Boundary-Scan controller such as the PCI-1149.1/Turbo are required to execute this file.Infrastructure TestThe infrastructure test verifies the TAP connection between the controller and the ScanDIMM-SO204/DDR3. It also verifies that the boundary-scan infrastructure of the device on the ScanDIMM-SO204/DDR3 is fully functional. The infrastructure test requires a Corelis Boundary-Scan controller, a ScanDIMM-SO204/DDR3 unit and a Host TAP cable (P/N 15336). The following steps execute an infrastructure test.Steps1.Remove any memory modules from the Unit Under Test (UUT) DIMM socket(s) to be tested.2.Install the ScanDIMM-SO204/DDR3 in the socket.3.Connect the Host TAP Adapter cable P/N 15336 to the "TAP IN" connector on the ScanDIMM-SO204/DDR3.4.Connect the 10-pin TAP cable from the external controller to the other end of the Host TAP Adapter cable.5.Apply power to the UUT.6.Make sure that both LEDs on the ScanDIMM-SO204/DDR3 illuminate.7.Double-click on the ScanExpress Runner Icon.8.Select New Test Plan from the File menu and click on the Add button.9.With the file browser, find and select the "ScanDIMM-SO204-DDR3_Selftest_inf.cvf" file. Click OK.10.Select Controller from the Setup menu, then choose the appropriate Boundary-Scan controller.11.Set the TCK frequency to 1 MHz and the TAP voltage to 1.8V.12.Select Run Test. The test should run and pass.The figure below shows a passing infrastructure test.Figure 4-1. ScanExpress Runner Infrastructure TestTroubleshooting OverviewUse the following general guidelines to troubleshoot problems when the ScanDIMM-SO204/DDR3 is added to the test system.1.Make sure the ScanDIMM-SO204/DDR3's TAP Voltage is set to 1.8V2.Make sure power is being supplied to the ScanDIMM-SO204/DDR3, the boundary-scan controller, and the target. TheScanDIMM-SO204/DDR3's green LEDs will be illuminated if power (1.5V) is being supplied to the DIMM socket and the boundary-scan controller is connected.3.Run the provided self-test and make sure that it passes.4.Reduce the TCK (test clock) frequency to 1 MHz. The TCK frequency can be set too high for the scan chain andsometimes using a lower frequency will allow the test steps to pass. Once the scan chain is known to be stable, then the TCK frequency can be increased to the maximum frequency that will allow the test steps to pass.Notes1.DDR3 modules are not backwards compatible with DDR2 modules and DDR3 modules will not fit into DDR2 sockets;forcing them can damage the ScanDIMM and/or the board.Legal and Contact InformationPRINTING HISTORYRevision A, May 2010GENERAL NOTICEInformation contained in this document is subject to change without notice. CORELIS shall not be liable for errors contained herein for incidental or consequential damages in connection with the furnishing, performance, or use of material contained in this manual.This document contains proprietary information that is protected by copyright. All rights reserved. No part of this document may be reproduced or translated to other languages without the prior written consent of CORELIS. This manual is a CORELIS proprietary document and may not be transferred to another party without the prior written permission of CORELIS. CORELIS assumes no responsibility for the use of or reliability of its software on equipment that is not furnished by CORELIS.ENVIRONMENTAL NOTICEThis product must be disposed of in accordance with the WEEE directive.TRADEMARK NOTICEScanExpress and ScanDIMM are trademarks of Corelis Inc.Other products and services named in this manual are trademarks or registered trademarks of their respective companies. All trademarks and registered trademarks in this manual are the property of their respective holders.PRODUCT WARRANTYFor product warranty and software maintenance information, see the PRODUCT WARRANTY AND SOFTWARE MAINTENANCE POLICY statement included with your product shipment.EXCLUSIVE REMEDIESTHE REMEDIES CONTAINED HEREIN ARE THE CUSTOMER'S SOLE AND EXCLUSIVE REMEDIES. CORELIS SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY. Product maintenance agreements and other customer assistance agreements are available for Corelis products. For assistance, contact your nearest Corelis Sales and Service Office.RETURN POLICYNo items returned to CORELIS for warranty, service, or any other reason shall be accepted unless first authorized by CORELIS, either direct or through its authorized sales representatives. All returned items must be shipped pre-paid and clearly display a Return Merchandise Authorization (RMA) number on the shipping carton. Freight collect items will NOT be accepted. Customers or authorized sales representatives must first contact CORELIS with notice of request for return of merchandise. RMA's can only originate from CORELIS. If authorization is granted, an RMA number will be forwarded to the customer either directly or through its authorized sales representative.CONTACT INFORMATIONFor sales inquiries, please contact *****************.For any support related questions, please enter a support request at /support or email *******************. For more information about other products and services that Corelis offers, please visit .。

惠普 ScanJet Enterprise 8500 fn1 用户指南说明书

此处包含的信息如有更改，恕不另行通知。

HP 产品及服务的保修仅以随该产品及服务提供的书面保修声明为准。

本文所述任何内容不应被视为附加保修。

对任何技术或编辑错误或者本文所述内容的遗漏，HP 不承担任何责任。

Edition 1, 11/2015商标声明Adobe®、Adobe Photoshop®、Acrobat®和PostScript®是Adobe Systems Incorporated 的商标。

Apple 和Apple 徽标是Apple Computer, Inc. 在美国以及其它国家/地区注册的商标。

iPod 是Apple Computer, Inc. 的商标。

请勿盗用音乐作品。

Microsoft®、Windows®、Windows® XP 和Windows Vista® 是Microsoft Corporation 在美国的注册商标。

UNIX®是The Open Group 的注册商标。

目录1产品基本信息 (1)产品功能 (2)前视图 (4)背面 (4)睡眠模式 (6)自动关机功能 (7)2控制面板 (9)控制面板布局 (10)解释控制面板状态指示灯 (11)控制面板信息 (12)主页屏幕 (13)触摸屏上的按钮 (14)控制面板帮助系统 (15)3管理- 配置产品 (17)支持的Windows 实用程序 (18)HP Web Jetadmin (18)内嵌式Web 服务器 (18)HP 数字发送软件(HP DSS) (18)支持的网络协议 (19)支持的电子邮件协议 (21)使用管理菜单的基本配置 (22)导航管理菜单 (22)Jetdirect 菜单 (23)配置语言设置 (28)配置时间设置 (28)分配IP 地址 (29)使用电子邮件设置向导设置和配置电子邮件设置 (29)从控制面板手动配置IPv4 TCP/IP 参数 (30)从控制面板手动配置IPv6 TCP/IP 参数 (31)ZHCN iii禁用网络协议（可选） (31)链接速度和双工设置 (31)使用内嵌式Web 服务器的基本配置 (32)查看或更改网络设置 (32)设置或更改管理员密码 (32)配置电子邮件选项 (32)保存到网络文件夹设置 (33)配置“保存到SharePoint”选项 (33)配置USB 存储设备设置 (34)配置快速设置 (34)配置常规安全设置 (34)配置访问控制安全设置 (35)使用内嵌式Web 服务器的其它配置 (36)4管理- 管理产品 (37)使用信息页 (38)使用内嵌式Web 服务器 (39)打开内嵌式Web 服务器 (39)内嵌式Web 服务器选项 (39)使用HP Web Jetadmin 软件 (41)控制数字发送安全 (42)网络验证 (42)安全电子邮件 (42)限制软件访问 (42)安全功能 (43)保护内嵌式Web 服务器安全 (43)管理临时作业文件 (43)安全存储擦除 (44)受影响的数据 (44)安全文件擦除 (44)安全磁盘擦除 (44)HP 高性能安全硬盘 (44)管理证书 (44)载入证书 (45)载入证书吊销列表(CRL) (45)验证和授权 (45)节能设置 (46)升级固件 (47)备份产品数据 (48)恢复产品数据 (49)iv ZHCN5装入原件 (51)使用自动送纸器(ADF) (52)文档放入提示 (52)装入混合尺寸文档的提示 (53)如何放入文档 (53)使用扫描玻璃板 (55)6扫描和发送文档 (57)登录 (57)新扫描仪功能 (58)预览扫描 (59)使用图像预览屏幕 (59)将扫描的文档发送到一个或多个电子邮件 (61)使用通讯簿 (61)创建收件人列表 (61)使用个人或共享联系人通讯簿 (61)向个人或共享联系人通讯簿添加条目 (61)从个人联系人通讯簿删除条目 (61)使用“发送电子邮件”屏幕 (62)发送文档 (63)发送文档 (63)使用自动填写功能 (63)传真扫描的文档 (64)使用发送传真屏幕 (64)发送传真 (65)保存到网络文件夹或USB 存储设备 (66)保存到SharePoint 站点 (67)使用快速设置发送或保存文档 (68)扫描至工作流目的地 (69)7维护产品 (71)订购维护用品和扫描仪耗材 (72)清洁触摸屏 (72)清洁扫描玻璃板、扫描条带和自动进纸器(ADF) 双面外壳 (72)清洁滚筒 (75)8更换和安装组件 (77)更换滚筒 (78)ZHCN v更换前面板 (85)更换键盘 (88)更换硬盘驱动器 (90)安装Jetdirect 卡 (93)将附件安装到硬件集成包中 (95)9疑难排解 (99)扫描错误 (99)基本疑难排解提示 (101)安装问题 (102)初始化或硬件问题 (102)检查以太网连接 (102)检查是否接通产品电源 (103)重置产品 (103)产品已暂停或关闭 (104)产品在触摸屏上显示“暂停”消息 (104)我收到一封电子邮件，指出产品已关机 (104)进纸问题 (105)卡纸、偏斜、进纸错误或多张进纸 (105)扫描易碎原件 (105)产品不进纸 (105)文档出纸盘中的原件卷曲 (106)扫描图像的下部被截断 (106)扫描的图像上有条纹或划痕 (106)文档进纸盘中装入的纸张反复卡纸 (106)从送纸道清除卡纸 (106)产品已正确停止工作 (108)解决电子邮件问题 (109)验证SMTP 网关地址 (109)验证LDAP 网关地址 (109)解决网络问题 (110)恢复工厂设置 (111)联系HP 支持部门 (111)10技术规格和保修 (113)产品规格 (114)送纸器技术规格 (114)环境技术规格 (114)vi ZHCN易失性内存 (115)非易失性内存 (115)硬盘驱动器内存 (115)管制型号 (116)环境产品管理计划 (117)保护环境 (117)产生臭氧 (117)能耗 (118)碳粉消耗 (118)纸张使用 (118)塑料 (118)HP LaserJet 打印耗材 (118)纸张 (118)材料限制 (119)用户负责销毁废弃设备（欧盟和印度） (119)电子硬件回收 (119)巴西硬件回收利用信息 (120)化学物质 (120)符合欧盟委员会条例1275/2008 的产品功率数据 (120)SEPA Ecolabel 用户信息（中国） (120)复印机、打印机和传真机能源效率标识实施规则 (120)危险物质限制声明（印度） (121)有害物质限制声明（土耳其） (121)危险物质限制声明（乌克兰） (121)有毒有害物质表（中国） (121)材料安全数据表(MSDS) (122)EPEAT (122)更多信息 (122)HP 有限保修声明 (123)英国、爱尔兰和马耳他 (124)奥地利、比利时、德国和卢森堡 (124)比利时、法国和卢森堡 (125)意大利 (126)西班牙 (126)丹麦 (127)挪威 (127)瑞典 (127)葡萄牙 (128)希腊和塞浦路斯 (128)ZHCN vii匈牙利 (128)捷克共和国 (129)斯洛伐克 (129)波兰 (129)保加利亚 (130)罗马尼亚 (130)比利时和荷兰 (130)芬兰 (131)斯洛文尼亚 (131)克罗地亚 (131)拉脱维亚 (131)立陶宛 (132)爱沙尼亚 (132)索引 (133)viii ZHCN1产品基本信息本用户指南介绍了使用产品时需要了解的内容。

hp m28w 多功能一体机使用说明书

Colour availability depending on Country.Light Sage Cement Indigo 1Wireless operations are compatible with 2.4 GHz and 5.0 GHz operations only. Learn more at /go/mobileprinting. Wi-Fi is a registered trademark of Wi-Fi Alliance®. Supports both 5.0 GHz and 2.4 GHz using up to 12 non-overlapping channels vs only 3 non-overlapping channels for 2.4 GHz only. Supports 5.0 GHz band (up to 150 mbps) vs 2.4 GHz band (up to 72.2 mbps). Internet access required and must be purchased separately. 2 Requires the HP Smart app download. For details on local printing requirements see /go/mobileprinting. Certain features/software are available in English language only. Internet access required and must be purchased separately. Fax capabilities are for sending a fax only, and may require additional purchase. For more information, see /mobile-fax. 3 Mobile device needs to support Bluetooth v4.2+ and be enabled. A mobile app such as HP ePrint or HP Smart must be installed and opened for printing. Mobile device must be within 5 feet of the printer. For details, see /go/mobileprinting. Bluetooth is a trademark owned by its proprietor and used by HP under license. 4 USB cable not included; purchase separately. 5 Compared with standard-fill Original HP ink cartridges. High-yield ink cartridges not included; purchase separately. For more information, see /go/learnaboutsupplies.Wireless, Print, Copy, Scan, Send Mobile FaxHP DeskJet Plus 4100 All-in-One Printer Series• Work fast and hands-free—the 35-page auto- feeder helps you complete scan and copy jobs quickly.• Easily handle tasks and get a lot from one device – print, scan, and copy.• Easily print, scan, and copy everyday documents from your smartphone, using HP Smart app.2• Save time by sending a mobile fax from your smartphone, tablet, or PC for 24 months, with HP Smart app.2• Get started fast with simple setup that guides you through each step, using HP Smart app.2• Get better range and faster , more reliable connections using dual-band Wi-Fi® with self- reset.1• Get connected with Bluetooth® and start printing fast from your smartphone or tablet – easy setup.3• Get connected and start printing. Easily connect your printer to your computer with the built-in USB port.4• Original HP ink cartridges deliver sharp text and vibrant graphics for all your everyday documents and photos.• Print more pages and change cartridges less often with Original HP high-yield cartridges.5Multi-task with ease – set up with HP Smart app,2 and get worry-free wireless.1All the features. All the value. Print, scan, and copy everyday documents, and get a 35-page automatic feeder and worry-free wireless.1 Count on simple setup with HP Smart app – even send a fax.2Added extras so you can do moreSimple setup. Simple printing.Quality you can count onWhiteSpecifications for HP DeskJet Plus 4100 AiO Printer SeriesTechnical specificationsNumber of Users 1-3 UsersAIO functions Wireless, Print, Copy, Scan, Send mobile faxPrint Speed 1Black : Up to 20 ppm (draft, A4); Up to 8.5 ppm (ISO); Colour : Up to 16 ppm (draft, A4); Up to 5.5 ppm (ISO)First page out (A4, ready)2Black : As fast as 15 seconds; Colour : As fast as 19 secondsResolutionBlack (best): 1200 x 1200 rendered dpi; Colour (best): Up to 4800 x 1200 optimized dpi colour (when printing from a computer on selected HP photo papers and 1200 input dpi)Duplex print optionsManual (driver support provided)Mobile printing capability 3 Apple AirPrint™; Chrome OS; HP Smart app; Mopria-certified Language HP PCL 3 GUI; HP PCLm (HP Apps/UPD); URF (AirPrint)Ink types Dye-based (colour); Pigment-based (black)Scan TypeFlatbed, ADFTechnology Contact Image Sensor (CIS)ResolutionHardware: Up to 1200 x 1200 dpi; Optical: Up to 1200 dpi Max scanning size Flatbed: 216 x 297 mm Input modes Front-panel scan Grayscale levels 256Bit depth 24-bitFile format JPEG, TIFF , PDF , BMP , PNGCopy Speed Black (ISO): Up to 6 cpm; Colour (ISO): Up to 3 cpmResolution Black (text and Graphics): Up to 300 x 300 dpi; Colour (text and graphics): Up to 300 x 300 dpi Copier Settings Auto-enlargeSend Mobile Fax ResolutionBlack (standard): 150 x 150 dpi; Colour (standard): 150 x 150 dpi Transmission speed 414.4 kbpsMemory 5Unlimited storageFax featuresFaxing: Yes; Faxing options (ADF): Single-sided; Auto-redialling: Yes; Fax delayed sending: No;Distinctive ring detection supported: No; Fax forwarding supported: Yes; Fax polling supported: No; Auto fax reduction supported: No; Fax telephone mode supported: No; Remote retrieval supported: Yes (with HP Smart app using mobile device); PC interface supported: Yes, using HP Smart app for DesktopFax smart software features Option to add files from your phone file/photos, Camera scan or Printer scanner , Option to easily add cover page and save the cover page template, Access to Fax history to see all send faxes and drafts, Ability to edit and resent fax from History, Easily print fax confirmation DisplayIcon LCD displayControl PanelFixed icons display; 7 buttons (Power , Cancel Job, Resume, Info, Wireless, Colour Copy & Black Copy); 5 LED indicator lights (Power , Ink level, Wifi, resume & Info).Processor speed 180 GHzMediaDuty cycle (monthly, A4)6Up to 1,000 pagesRecommended monthly page volume Up to 100 to 400 pagesADF capacity Standard, 35 sheets Supported sizesA4; B5; A6; DL envelope Recommended weights 75 g/m²Supported weights A4: 60 to 90 g/m²; HP envelopes: 75 to 90 g/m²; HP cards: up to 200 g/m²; HP 10 x 15 cm photo paper: up to 300 g/m²Types Plain paper , photo paper , brochure paper , envelopes and other specialty inkjet papers Paper handling Input: 60-sheet input tray; Output: 25-sheet output tray MemoryStandard : 86 MB; Maximum : 512 M bit DDR1; 160 M bit flashOperating system compatibility Minimum system requirementsPC: Windows 10, 7: 1 GHz 32-bit (x86) or 64-bit (x64) processor , 2 GB available hard disk space, Internet connection, USB port, Internet Explorer;Mac: MacOS Sierra v10.12 (previously OS X), macOS High Sierra v10.13, macOS Mojave v10.14, macOS Catalina v10.15, 2 GB Available Space, Internet Access.ConnectivityConnectivity (Std) 1 Hi-Speed USB 2.0Network capabilities Wi-Fi 802.11a/b/g/nWireless capability Yes, built-in Wi-Fi 802.11a/b/g/n Supported network protocols802.11a/b/g/n Dimensions (W x D x H)7428 x 445.6 x 261 mm Weight 84.82 kgEnvironmentalOperating environmentOperating temperature range: 5 to 40° C; Recommended operating temperature range: 15 to 30° C; Operating humidity range: 15 to 80% RH (non-condensing); Recommended operating humidity range: 20 to 80% RH (non-condensing); Storage temperature range: -40 to 60° C; Operating Altitude (metric):Up to 3,000 m; Non-operating humidity range: 5 to 90% RH (non-condensing); Non-operating Altitude: 4500 m Acoustics Acoustic power emissions (active, printing): 6.4 B(A); Acoustic pressure emission: 55 dB(A) (printing at 5 ppm); Acoustic power emissions (active, copy): 6.5B(A)Power specifications Power supply type: Internal; Power supply required: Input voltage: 200 to 240 VAC (+/- 10%), 50/60 Hz (+/- 3Hz); Power consumption:9 1.0 watts (sleep), 0.1 watts (off), 0.1 watts (auto-off)What’s in the box 10Printer; Setup Black Cartridge; Setup Tri-colour Cartridge; Setup guide; Reference guide; USB cable; Power cord [For ink volume and page yield information, visit /go/learnaboutsupplies]WarrantyOne-year limited hardware warranty; 24-hour , 7 days a week supportOrdering informationNumber 3XV15A 7FS88ADescriptionHP DeskJet Plus 4120 AiO Printer (White) (HK)HP DeskJet Plus 4120 AiO Printer (White) (TW)Replacement cartridges 11NumberAP Developed Markets 3YM56AA 3YM57AA 3YM59AA 3YM55AA 3YM58AADescriptionHP 67 Black Original Ink CartridgeHP 67XL Black High Yield Original Ink Cartridge HP 67XXL Black Extra High-Yield Original Ink CartridgeHP 67 Tri-Colour Original Ink CartridgeHP 67XL Tri-Colour High-Yield Original Ink CartridgeFor information on reference page output, please log on the /go/pageyield.HP Care PacksNumber UG295E UG235E UG367E UG337E UG487E UG457E UG092E UG062E U6N05EDescriptionHP 2-year return Multifunction Printer - E Svc HP 3-year return Multifunction Printer - E Svc HP 2-year Pickup Return Multifunction Printer -E SvcHP 3-year Pickup Return Multifunction Printer -E SvcHP 2-year Onsite Exchange Multifunction Printer - E SvcHP 3-year Onsite Exchange Multifunction Printer - E SvcHP 2-year Next Business Day Exchange Multifunction Printer - E SvcHP 3-year Next Business Day Exchange Multifunction Printer - E SvcHP Installation w/nw Consumer Printer SvcProtect your investment with HP Care Pack. Let HP certified engineers resolve your technical issues. For more details on HP Care Pack, go to /go/cpc.Recommended Papers 12Number 9RR53A 9RR54A 9RR55A 9RR56APlease visit /apac/paper for more details.Hewlett-Packard officesDescriptionHP Photo Paper, Glossy, 10 x 15 cm, 20 sheets, 180 gsmHP Photo Paper, Glossy, 10 x 15 cm, 100 sheets, 180 gsmHP Photo Paper, Glossy, A4, 20 sheets, 180 gsm HP Photo Paper, Glossy, A4, 100 sheets, 180 gsmHong Kong Taiwan(852) 3077 2688(02) 8722 9000 For more information, please visit us at /apac/homeandoffice.1Speed specifications have been updated to reflect current industry testing methods. 2 Either after first page or after first set of ISO test pages. For details see /go/printerclaims. 3 Wireless performance is dependent upon physical environment and distance from the access point. Wireless operations are compatible with 2.4 GHz routers only; excludes wireless direct. Wireless direct may require driver or apps be installed and connected on wireless-enabled mobile device or PC. Wireless functionality may vary by computer and mobile operating systems, see . Separately purchased data plans or usage fees may apply. Print times and connection speeds may vary. AirPrint supports OS X v10.11 El Capitan and devices running iOS 4.2 or later and requires the printer be connected to the same network as your OS X or iOS device. AirPrint, the AirPrint Logo, iPad, iPhone, and iPod touch are trademarks of Apple® Inc. Windows is a trademark of the Microsoft group of companies. 4 Based on cloud storage. 5 Set by Fax service Provider. 6 HP recommends that the number of printed pages per month be within the stated range for optimum device performance, based on factors including supplies replacement. 7 Dimensions vary as per configuration. 8 Weight varies as per configuration. 9 Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This will damage the printer and void the product warranty. 10 For more information about page yields for replacement cartridges see /go/learnaboutsupplies for setup cartridges click on Setupsupplies link on the same page. 11 Average based on ISO/IEC 24711 or HP testing methodology and continuous printing. Actual yield varies considerably based on content of printed pages and other factors. For details see /go/learnaboutsupplies . 12 Available in selected countries only.© Copyright 2021 HP Development Company, L.P . The information contained herein is subject to change without notice. The only warranties for HPproducts and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.4AA7-7791EEAP , Feb 2021Windows 10, 7; MacOS Sierra v10.12 (previously OS X), macOS High Sierra v10.13, macOS Mojave v10.14, macOS Catalina v10.15, Chrome OS。

HP Service Health Analyzer 产品说明书

ANTICIPATEIT issues before they impact your business.HP Service Health AnalyzerBrochureWhat if you could forecast IT problems before they occurred?Having complete visibility into the health of your business is a priority in today’s world. It is necessary to help you adapt, even survive, in today’s cloud and virtualized IT environments. To manage a dynamic infrastructure with innumerable applications, your business must do more than just react to service problems, maintain separate domain monitoring tools, or manually update static thresholds that are difficult to set and maintain. It needs advanced notification of problems, better visibility into the correlation of applications with business services to enable anomaly tracking, and an easier way of determining acceptable thresholds and real anomalies.IT organizations such as yours have the means to collect allthe relevant data to address issues of visibility, anomaly tracking, and setting thresholds; the immediate need is an analytic toolset and automated intelligence to help anticipate IT problemsand take care of them before they negatively impact the business. IT managers are looking into the world of predictive analytics,one of the notable business intelligence trends of 2011 1, forthese solutions.HP Service Health Analyzer (SHA), a predictive analytics toolbuilt on top of a real-time, dynamic service model, can help you anticipate IT problems before they occur, prevent business impact, and remediate them quickly. HP Service Health Analyzer—a smarter way to manage your IT in a dynamic worldHP SHA is a part of the Service Intelligence (SI) offering underthe HP Business Service Management (BSM) 9.1 portfolio. SI provides the analytic tools to enhance virtualized environments, report business service and trends across multiple domains, gauge the health of a business in context of business goals, and comprehensively monitor all aspects of IT. While all this is important, businesses should also be able to convert all the monitored and collected data into actionable knowledge. And that’s whereHP SHA comes in.1Source: “Notable business intelligence trends for 2011 and beyond,” William Laurent, Dashboard Insight, January 24, 2011, available at / articles/new-concepts-in-business-intelligence/notable-business-intelligence-trends-for-2011-and-beyond.aspx.SHA is an analytics engine that works on the principles of“anticipate, prevent, and remediate.” Using advanced statistics and sophisticated algorithms, it analyzes current metrics and historical trends to find abnormalities. It then alerts your IT department of real service degradation before it happens, and initiates a set of automated workflows and remediation steps to fix the potential issue. With SHA, your IT department can:Anticipate real IT incidents before they occur: Analyze current and historical data to getadvanced notification of future events with SHA. Built upon the HP BSM 9.0 Run-time Service Model (RTSM),it provides the analytic tool set to correlate disparate application and topology metrics to help you anticipate potential problems before they occur.Prevent business impact: SHA makes yourlife easier by automatically learning the real thresholds in your environment. It looks at historical trends and seasonality patterns over time, to establish abaseline of what normal behavior should be. With real thresholds in place, you can then filter out alert noises and only be notified of issues that deviate from the acceptable baselines. If you have abnormalities related to a specific service, you can see the service-level agreements and know the impact that anomaly could cause. This way, you can prioritize effort toward the issues that are most important.Additionally, SHA uses a patented technique known as Anomaly DNA Technology to analyze the structural makeup of an anomaly and compare that with the known DNA of other anomalies. This anomaly DNA matching provides two benefits:• Reducing mean time to repair by immediately providinginformation about how a specific problem was solved previously • Reducing operations effort by matching known DNA to anomalies marked as noiseRemediate events by fusing analytics and automation: SHA helps you to quicklyidentify the root cause through an advanced user interface. It also helps you take action before theservice is impaired, through an automated event-to-ticket closure remediation. This quick remediation simplifies the complexities of virtualization, cloud, and mobile computing environments.Figure 1: A representation of SHA predictive analytics at work for anearly-adopter customer.Key features and benefitsSHA offers the following key features and benefits:Automatic capture of real thresholdsIt is important to create metric thresholds in yourorganization because they help you pinpoint operational events. These events can be triggered based on whether the metric breach goes above or below the set thresholds. The downside of setting thresholds, though, is thatmanaging them involves manual labor that is tedious, time consuming, and error prone.SHA simplifies this task for you by learning the dynamic threshold based on metric history. It uses patented algorithms to calculate baselines. SHA’s algorithms use historic metric trends, seasonality (the repetitive behavioral pattern of metrics during the week, month, and season), and deviations. With the self-learned baseline, SHA is in a position to determine when a metric is behavingabnormally. When the abnormal behavior is detected, the Run-time Anomaly Detection (RAD) Engine comes into play.1BaselineTopology analysisStatistical learning algorithmRun-time Anomaly Detection (RAD) EngineAnomaly DNA TechnologySHA has a unique capability to capture anomalies, store them in a database, and match new anomalies to those captured previously. This capability is known as Anomaly DNA Technology.The DNA of an anomaly is characterized by:• Multiple metric breaches: Metrics that have breached their baseline—this is also defined as “abnormal metric state”• Temporal behavior: Information indicating that the abnormal behavior is not temporary• Topology behavior: Information from the RTSM,connecting the configuration item (CI) relationships to the abnormal metricsAnomaly DNA Technology correlates the abnormal metrics to the underlying infrastructure. Once the system defines an anomaly, it stores that information for later comparison by using the relationship information and abnormal metric state. If a match is found, the system can provide information on how to remediate the problem. Otherwise the event is suppressed and the original anomaly is marked as noise.When an anomaly is detected, SHA automatically captures the current topology of the CIs involved in the event. This helps in understanding the topology as it was at the time of the anomaly—an especially valuable learning when reviewing anomalies that occurred overnight or when there were no on-call IT people to address the issues. SHA also collects and presents discovered changes for the relevant CIs so that the information can be used as a part of the root cause analysis.3SHA customer John McCarty from Sprint said, “The act ofincorporating SHA was very simple. No configuration needed to get it up and running. That’s unheard of in an enterprise solution, and it is hugely beneficial.”Quick remediation of issuesWhen something does behave abnormally, SHA sends an eventto an event management tool and initiates a set of automated workflows and remediation steps to fix the problem—for example, it may initiate automated workflows on a server or network device, or even redirect workload to a new provider. The workflow includes opening and closing of problem tickets, all in an automated fashion. SHA enables your IT department to automatically identify potential issues and solve them before they become a problem for end users. Zero configuration, zero maintenanceAs well as offering you the benefits of patented technologies that help anticipate, prevent, and remediate IT problems, SHA is a “plug and play” installation. There is no need for any configuration to set it up to begin obtaining valuable information. Most users can get SHA up and running quickly—an unusual feat for most large-scaledeployments.Get connectedGet the insider view on tech trends, alerts, andHP solutions for better business outcomes© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.4AA3-7300ENW, Created October 2011。

HPE Data Protector 11.03 存储支持矩阵版本 1.3 中文名字说明书

Table of ContentsIntroduction (3)What’s New (4)Abbreviations used in the Matrix (5)Table 1: 3PAR Storage Systems and SMIS integration (5)Table 2: Primera Storage Systems and SMIS integration (5)Table 3: Alletra 9000 Storage Systems and SMIS integration (5)Table 4: Supported microcode and RAID Manager HORCM versions for XP HPE Storage Arrays (5)Table 5: 3PAR Supported volume managers (6)Table 6: Primera Supported volume managers (6)Table 7: Alletra 9000 Supported volume managers (6)Table 8: XP Supported volume managers (6)Table 9: Supported alternate path solutions for HPE XP Storage Arrays (7)Table 10: 3PAR Supported configurations – Windows (x64) (7)Table 11: 3PAR Supported configurations – Linux (x64) (8)Table 12: 3PAR Supported configurations – HP-UX on Itanium (8)Table 13: 3PAR Supported configurations - VMware (9)Table 14: Primera Supported configurations – Windows (x64) (9)Table 15: Primera Supported configurations – Linux (x64) (9)Table 16: Primera Supported configurations – HP-UX on Itanium (10)Table 17: Primera Supported configurations - VMware (10)Table 18: Alletra 9000 Supported configurations – Windows (x64) (11)Table 19: Alletra 9000 Supported configurations – Linux (x64) (11)Table 20: Alletra 9000 Supported configurations - VMware (12)Table 21: XP Supported configurations – Windows (x64) (12)Table 22: XP Supported configurations - Linux (13)Table 23: XP Supported configurations – HP-UX on Itanium (13)Table 24: XP Supported configurations – Solaris (SPARC) (14)Table 25: Supported HPE 3PAR Recovery Manager (14)IntroductionThe details of the supported operating systems are specified in the individual tables below. The operating system, its version and the hardware architecture must be same on both application and backup hosts. For cluster support related information, please refer to Data Protector Zero Downtime Backup Administrator’s Guide.For Data Protector components running in combination with application versions and operating system versions, which are not supported by their respective vendors, the support from Opentext is limited to a reasonable-endeavors basis.For information about specific Windows versions supported by Data Protector please refer to the Platform and Integration Support Matrix.Updates/changes to individual fields within the Matrix will be highlighted in RED.What’s New1. Support of HPE XP 82. Support of SAP BRTools 7.4 using Oracle 18c & 19c with HPE XP Series on Windows Server3. Support of SAP BRTools 7.4 using Oracle 19c with HPE XP Series on RHEL 84. Support of Oracle 18c, 19c, 21c with HPE XP Series on Windows Server5. Support of Oracle 18c, 19c, 21c with HPE XP Series on RHEL 86. Support of Oracle 19c, 21c with HPE XP Series on HP-UX 11.31 IA7. Support of ZDB Filesystem with HPE XP Series on RHEL 88. Support of ZDB Filesystem with HPE XP Series on Windows Server9. Support of Microsoft SQL Server 2019 and 2022 with HPE XP Series on Windows serverAbbreviations used in the MatrixZDB Zero Downtime Backup IR Instant RecoveryBC Business Copy CA Continuous AccessTable 1: 3PAR Storage Systems and SMIS integration1 Storage volumes presented with Host Sees, Host Set, Port Set, or Matched Set are supported.2 Backup and instant recovery of GPT disks are not supported on Windows Server systems.3 3PAR Periodic Remote Copy feature is supported on 3.2.2 MU 2 with Patch P14.4 Storage volumes in volume set are supported.5 Peer Motion migration needs WWNs to be reset for successful backups. 6Supported only for InForm OS version 3.3.1 onwards.Table 2: Primera Storage Systems and SMIS integration1 Storage volumes presented with Host Sees, Host Set, Port Set, or Matched Set are supported.2 Backup and instant recovery of GPT disks are not supported on Windows Server systems.3 Storage volumes in volume set are supported.4 Peer Motion migration needs WWNs to be reset for successful backups. 5Remote copy is not supportedTable 3: Alletra 9000 Storage Systems and SMIS integration1Storage volumes presented with Host Sees, Host Set, Port Set, or Matched Set are supported. 2 Backup and instant recovery of GPT disks is not supported on Windows Server systems. 3 Storage volumes in volume set are supported.4Peer Motion migration needs WWNs to be reset for successful backups.Table 4: Supported microcode and RAID Manager HORCM versions for XP HPE Storage ArraysXP model Minimum microcode version required Minimum RAID Manager Library version required HP-UX Solaris Windows Linux XP 890-09-21-00/0001.34.00-01.34.0001.34.00InForm OS 3,5,7Operating SystemHP-UX IA Windows Server Linux 11.312012, 2012 R2, 20166, 20196SLES 12, 15 RHEL 7, 8 3.2.2Supported Supported Supported 3.3.1 Supported Supported Supported 3.3.2SupportedSupportedSupportedPrimera OS Operating SystemWindows Server 2 Linux HP-UX IA 52016, 2019, 2022 SLES 12, 15, RHEL 7, 811.31 4.0.x Supported Supported Supported 4.1.x Supported Supported Supported 4.2.x Supported Supported Supported 4.3.x 5 Supported Supported Supported 4.4.x 5 Supported Supported Supported 4.5.x 5Supported SupportedSupportedAlletra OSOperating System Windows Server 2Linux2016, 2019SLES 12, 15RHEL 7, 89.3.x Supported Supported 9.4.xSupported SupportedXP 7 70-01-31-00/00 01.15.03 - 01.32.03 - P9000 Family 1,2,370-01-01-00/0001.15.0301.15.0301.15.0301.15.031 Minimum Raid Manager Library version 01.15.00 or newer and minimum microcode version 50-04-20 is required for using snapshot capability of P9000 XP Disk Array Family.2 Includes support for Hitachi Virtual Storage Platform (VSP).3 All versions of HPE Business Copy P9000 XP and/or HPE Continuous Access P9000 XP that are supported by RAID Manager Library are supportedTable 5: 3PAR Supported volume managersOperating system Volume managerLVM LVM 2 LVM 2.1 VxVM Disk managerHP-UX supportedSupported Supported Supportedn/a Solaris n/a n/a n/a not-supported n/a Windows n/an/a n/a not supportedSupportedLinuxnot-supportedsupported 1not supported not supportedn/aTable 6: Primera Supported volume managersOperating system Volume managerLVM LVM 2 LVM 2.1 VxVM Disk manager Windows n/an/a n/anot supported SupportedLinuxnot-supportedSupported 1not supportednot supportedn/aTable 7: Alletra 9000 Supported volume managersOperating system Volume managerLVM LVM 2 LVM 2.1 VxVM Disk manager Windows n/an/a n/anot supported SupportedLinuxnot-supportedSupported 1not supportednot supportedn/aTable 8: XP Supported volume managersVolume managerOperating systemHP-UX Windows Solaris LinuxLogical Volume Manager (LVM) supported 2 n/a n/a supported 3 Veritas Volume Manager (VxVM) supportednot supported supportedsupported 4,5Disk Managern/a supported 1n/a n/aSolaris Volume Managern/an/asupportedn/a1 Dynamic disks are not supported.2 LVM 1.0, LVM 2.0 and LVM 2.1 are supported.3 The LVM2 2.02 is supported.4 VxVM 5.1 supported.5 Supported with patch bundle 8.11 and later versions1Only LVM2 2.02 is supported.1Only LVM2 2.02 is supported.1Only LVM2 2.02 is supported.The following is a list of supported alternate path and multi pathing solutions: Table 9: Supported alternate path solutions for HPE XP Storage ArraysAlternate path solutionsOperating systemHP-UX Windows Solaris LinuxHPE AutoPath supported Supported not supported n/a Sun Alternate Pathing driver n/a n/a supported n/a VxVM Dynamic Multipathing supported n/a supported n/a HP-UX LVM Alternate Links supported n/a n/a n/a Linux Native Multipathing n/a n/a n/a SupportedTable 10: 3PAR Supported configurations – Windows (x64)1Integrations Supportedversions Windowsversions2Single-hostLocal CopyDual-hostLocal CopyRemote CopyRaw disk 2012, 2012 R2,2016, 2019ZDB with IR ZDB with IR ZDB with IRNTFS file system 2012, 2012 R2,2016, 2019ZDB with IR ZDB with IR ZDB with IRMicrosoft Exchange Server3Microsoft ExchangeServer 20132012, 2012 R2 - - -Microsoft ExchangeServer 20162012, 2012 R2,2016- - -Microsoft SQL Server Microsoft SQLServer 20142012, 2012 R2 notsupportedZDB with IR ZDB with IR4Microsoft SQLServer 20162012, 2012 R2,2016notsupportedZDB with IR ZDB with IRMicrosoft SQLServer 20172012, 2012 R2,2016notsupportedZDB with IR ZDB with IRMicrosoft SQLServer 20192016, 2019 notsupportedZDB with IR ZDB with IROracle Oracle 12c9 RMANoffline or online42012, 2012 R2 ZDB with IR ZDB with IR ZDB with IROracle 18c RMAN offline or online6,42012, 2012 R2,2016, 2019ZDB with IR ZDB with IR ZDB with IROracle 19c RMANoffline or online6,42016, 2019 ZDB with IR ZDB with IR ZDB with IROracle 21c RMANoffline or online6,42016, 2019 ZDB with IR ZDB with IR ZDB with IRSAP BR*Tools 7.2 offline or online5Oracle 12c 2012, 2012 R2 notsupportedZDB with IR ZDB with IRSAP BR*Tools 7.4 offline or online5Oracle 12c 2012, 2012 R2 notsupportedZDB with IR ZDB with IROracle 18c 2016, 2019 notsupportedZDB with IR ZDB with IROracle 19c 2016, 2019 notsupportedZDB with IR ZDB with IR1 GPT partitions are not supported.2Oracle 12c includes all released versions of 12c R1 and 12c R2: 12.x.x.3 Microsoft Exchange Server ZDB and IR backups are supported using VSS. For details such as supported array types, writer GUID etc. refer toData Protector 11.03 VSS Integration Support Matrix.4Oracle PDB and CDB are not supported5 The integration is im plemented using “backint” functionality.6 Oracle ASM is not supported.Table 11: 3PAR Supported configurations – Linux (x64)Integrations SupportedVersionsRHEL,SLES, OEL,Scientific LinuxversionsSingle-hostLocal CopyDual-hostLocal CopyRemote CopyRaw Disk RHEL 7, 8SLES 12,15OEL 7, 8notsupportedZDB with IR ZDB with IRRaw Logical Volume RHEL 7, 8SLES 12, 15OEL 7, 8notsupportedZDB with IR ZDB with IRFile System RHEL 7, 8SLES 12, 15OEL 7, 8notsupportedZDB with IR ZDB with IROracle2Oracle 12c1RMAN offline oronlineRHEL 73SLES 123,4OEL 7notsupportedZDB with IR ZDB with IROracle 18c RMANoffline or onlineRHEL 7SLES 12OEL 7notsupportedZDB with IR ZDB with IROracle 19c RMANoffline or onlineRHEL 7, 8SLES 12, 15OEL 7, 8notsupportedZDB with IR ZDB with IROracle 21c RMANoffline or onlineRHEL 7, 8SLES 12, 15OEL 7, 8notsupportedZDB with IR ZDB with IRSAP BR*Tools 7.4 offline or online5Oracle 18c RHEL 7,8SLES 12, 15OEL 7, 8notsupportedZDB with IR ZDB with IROracle 19c RHEL 7, 8SLES 12, 15OEL 7, 8notsupportedZDB with IR ZDB with IR1 Oracle 12c includes all released versions of 12c R1 and 12c R2: 12.x.x.2 Oracle PDB and CDB are not supported3 Oracle ASM is supported4 IR backup of non-ASM database is not supported5 The integration is implemented using “backint” functionality.Table 12: 3PAR Supported configurations – HP-UX on ItaniumIntegration on HP-UX 11.311SupportedVersionsSingle-hostLocal CopyDual-hostLocal CopyRemote CopyRaw disk ZDB with IR ZDB with IR ZDB with IR Raw logical volume ZDB with IR ZDB with IR ZDB with IR File system5ZDB with IR ZDB with IR ZDB with IR Oracle3Oracle 12c7 RMANoffline or online2ZDB with IR ZDB with IR ZDB with IR6Oracle 18c RMANoffline or online2ZDB with IR ZDB with IR ZDB with IR6SAP BR*Tools 7.2offline or online4,6Oracle 12c not supported ZDB with IR ZDB with IR6 SAP BR*Tools 7.4offline or online4,6Oracle 12c not supported ZDB with IR ZDB with IR6 1 For HP-UX 11.31, new device special files (DSF) are supported for LVM only.2 Oracle ASM is not supported.3Oracle PDB and CDB are not supported4 The integration is implemented using “backint” functionality.5 HFS is not supported6 Not supported on 3PAR 3.3.17 Oracle 12c includes all released versions of 12cR1 and 12cR2Table 13: 3PAR Supported configurations - VMwareHypervisor Single-host Local Copy2Remote Copy2 VMware ESXi 7.0, 7.0 U1, 7.0 U2, 7.0 U3, 8.0ZDB +Restore ZDB + Restore1 VMware VVol (Virtual Volumes) is supported (except ESXi 7.0).2 Virtual Machine restore from a snapshot, Cached GRE, Power On and Live Migrate are supported.3 IR is not supported.4 Only the FC Protocol and the RDM configuration are supported5 The VMware “ATTACH DISK” feature, can be used for granular recovery of data. This feature is only supported through CLI.6 GRE from a snapshot on Linux is not supportedTable 14: Primera Supported configurations – Windows (x64)1Integrations SupportedVersions WindowsversionsSingle-hostLocal CopyDual-hostLocal CopyRemoteCopyRaw disk 2012 R2, 2016,2019ZDB with IR ZDB with IR ZDB with IRNTFS file system 2012 R2, 2016,2019ZDB with IR ZDB with IR ZDB with IRMicrosoft SQL Server Microsoft SQL Server20162016, 2019 notsupportedZDB with IR ZDB with IRMicrosoft SQL Server20172016, 2019 notsupportedZDB with IR ZDB with IRMicrosoft SQL Server20192016, 2019 notsupportedZDB with IR ZDB with IROracle2,3Oracle 18c RMANoffline or online2016, 2019 ZDB with IR ZDB with IR ZDB with IROracle 19c RMANoffline or online2016, 2019 ZDB with IR ZDB with IR ZDB with IROracle 21c RMANoffline or online2016, 2019 ZDB with IR ZDB with IR ZDB with IRSAP BR*Tools 7.4 offline or online4Oracle 18c2016, 2019 notsupportedZDB with IR ZDB with IROracle 19c2016, 2019 notsupportedZDB with IR ZDB with IR1 GPT partitions are not supported.2 Oracle ASM is not supported.3 Oracle PDB and CDB are not supported.4 The integration is implemented using “backint” functionalityTable 15: Primera Supported configurations – Linux (x64)Integrations SupportedVersions RHEL1 , SLES,OELVersionsSingle-hostLocal CopyDual-hostLocal CopyRemoteCopyRaw Disk RHEL 7, 8SLES 12,15OEL 7, 8not supported ZDB with IR ZDB with IRRaw Logical Volume RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IRFile System RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IROracle2,3Oracle 18c RMANoffline or online RHEL 7SLES 12OEL 7not supported ZDB with IR ZDB with IROracle 19c RMAN offline or online RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IROracle 21c RMAN offline or online RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IRSAP BR*Tools 7.4 offline or online4Oracle 18c RHEL 7,8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IROracle 19c RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IR1 Includes support for Red Hat Enterprise Linux Workstation and Enterprise Server if applicable.2 Oracle ASM is not supported3 Oracle PDB and CDB are not supported4 The integration is implemented using “backint” functionality.Table 16: Primera Supported configurations – HP-UX on ItaniumIntegration on HP-UX 11.311,2SupportedVersionsSingle-hostLocal CopyDual-hostLocal CopyRemote CopyRaw disk ZDB with IR ZDB with IR not supported Raw logical volume ZDB with IR ZDB with IR not supported File system ZDB with IR ZDB with IR not supported Oracle3,4Oracle 18c RMANoffline or onlineZDB with IR ZDB with IR not supportedOracle 19c RMANoffline or onlineZDB with IR ZDB with IR not supportedOracle 21c RMANoffline or onlineZDB with IR ZDB with IR not supportedSAP BR*Tools 7.4offline or online5Oracle 18c not supported ZDB with IR not supportedOracle 19c not supported ZDB with IR not supported1 For HP-UX 11.31, new device special files (DSF) are supported for LVM only.2 HFS is not supported3 Oracle ASM is not supported.4 Oracle PDB and CDB are not supported5 The integration is implemented using “backint” functionality.Table 17: Primera Supported configurations - VMwareHypervisor Single-host Local Copy1Remote Copy VMware ESXi 7.0, 7.0 U1, 7.0 U2, 7.0 U3, 8.0 ZDB +Restore Not Supported1 Virtual Machine restore from a snapshot, Cached GRE, Power On and Live Migrate are supported.2 IR is not supported.3 Only the FC Protocol and the RDM configuration are supported4 The VMware “ATTACH DISK” feature, can be used for granular recovery of data. This feature is only supported through CLI.5 GRE from a snapshot on Linux is not supportedTable 18: Alletra 9000 Supported configurations – Windows (x64)1Integrations SupportedVersions WindowsversionsSingle-hostLocal CopyDual-hostLocal CopyRemoteCopyRaw disk 2012 R2, 2016,2019ZDB with IR ZDB with IR ZDB with IRNTFS file system 2012 R2, 2016,2019ZDB with IR ZDB with IR ZDB with IRMicrosoft SQL Server Microsoft SQL Server20162016, 2019 notsupportedZDB with IR ZDB with IRMicrosoft SQL Server20172016, 2019 notsupportedZDB with IR ZDB with IRMicrosoft SQL Server20192016, 2019 notsupportedZDB with IR ZDB with IROracle2,3Oracle 18c RMANoffline or online2016, 2019 ZDB with IR ZDB with IR ZDB with IROracle 19c RMANoffline or online2016, 2019 ZDB with IR ZDB with IR ZDB with IROracle 21c RMANoffline or online2016, 2019 ZDB with IR ZDB with IR ZDB with IR1 GPT partitions are not supported.2 Oracle ASM is not supported.3 Oracle PDB and CDB are not supported.Table 19: Alletra 9000 Supported configurations – Linux (x64)Integrations SupportedVersions RHEL1 , SLES,OELVersionsSingle-hostLocal CopyDual-hostLocal CopyRemoteCopyRaw Disk RHEL 7, 8SLES 12,15OEL 7, 8not supported ZDB with IR ZDB with IRRaw Logical Volume RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IRFile System RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IROracle2,3Oracle 18c RMANoffline or online RHEL 7SLES 12, OEL 7not supported ZDB with IR ZDB with IROracle 19c RMAN offline or online RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IROracle 21c RMAN offline or online RHEL 7, 8SLES 12, 15OEL 7, 8not supported ZDB with IR ZDB with IR1 Includes support for Red Hat Enterprise Linux Workstation and Enterprise Server if applicable.2 Oracle ASM is not supported3 Oracle PDB and CDB are not supportedTable 20: Alletra 9000 Supported configurations - VMwareHypervisor Single-host Local Copy1Remote Copy VMware ESXi 7.0, 7.0 U1, 7.0 U2, 7.0 U3 ZDB +Restore Not Supported1 Virtual Machine restore from a snapshot, Cached GRE, Power On and Live Migrate are supported.2 IR is not supported.3 Only the FC Protocol and the RDM configuration are supported4 The VMware “ATTACH DISK” feature, can be used for granular recovery of data. This feature is only supported through CLI.5 GRE from a snapshot on Linux is not supportedTable 21: XP Supported configurations – Windows (x64)1 Includes support for Thin Provisioned LUNs with P9500 array.2 GPT partitions are not supported.3 If secondary volume for CA or primary volume for BC is not connected to the backup host4 The integration is implemented using the ‘backint’ functionality.5 Oracle 12c includes all released versions of 12c R1 and 12c R2: 12.x.x.6 Oracle ASM is not supported.7 Oracle PDB and CDB are not supportedTable 22: XP Supported configurations - Linux1 Only ext3 and ext4 file systems are supported.2 Oracle PDB and CDB are not supported3 Only ASM is supported4 1:N mirror configuration is not supported.5 Oracle 12c includes all released versions of 12c R1 and 12c R2: 12.x.x.6Not supported with XP 87The integration is implemented using the ‘backint’ functionalityTable 23: XP Supported configurations – HP-UX on Itanium1 With HP-UX 11.31, new device special files (DSF) are also supported2Oracle 12c includes all released versions of 12c R1 and 12c R2: 12.x.x.3 The integration is implemented using the ‘backint’ functionality.4 In the case of Oracle 12c R1 ASM in the offline configuration, disk+tape backup is not supported5 Oracle PDB and CDB are not supported6 ASM is not SupportedTable 24: XP Supported configurations – Solaris (SPARC)Integration on Sun Solaris 10, 11Supported VersionsSingle-host BCDual-host BCCACA and BC(combined)Raw DiskZDB with IR ZDB with IR ZDB ZDB Raw logical volume ZDB with IR ZDB with IR ZDB ZDB File systemZDB with IR ZDB with IR ZDB ZDB Oracle 2,3,4Oracle 12c ZDB with IR ZDB with IR ZDB ZDB SAP BR*Tools7.2 offline or online 1Oracle 12cnot supportedZDB with IRZDBZDB1 The integration is implemented using the ‘backint’ functionality.2 Oracle 12c includes all released versions of 12c R1 and 12c R2: 12.x.x.3 Oracle PDB and CDB are not supported 4ASM is not SupportedTable 25: Supported HPE 3PAR Recovery ManagerData Protector supports HPE 3PAR Recovery Manager for Microsoft SQL Server, Microsoft Exchange and Oracle. Please refer to the HPE 3PAR Recovery Manager link fo r the versions of the supported Applications’ versions and the supported Operating Systems versions.3PAR Recovery Manager for Microsoft Exchange Server 3PAR Recovery Manager for Microsoft SQL Server 3PAR Recovery Manager for Oracle。

System Sensor SYNC-1 产品抹除通知 - 商品说明书

System Sensor 3825 Ohio Avenue St. Charles, IL 60174 Product Discontinuation Notice: SYNC-1***************************************************** December 2020 Update **************************************************** SYNC-1 (US Market)Please be advised that System Sensor will no longer be accepting orders for the SYNC-1 daughter card accessory. All remaining inventory has been allocated to existing orders. If you have an order on backlog, that order will be fulfilled. Future order requests will no longer be processed by customer service. If you order using an automated process such as EDI, you will receive a return notification stating the order cannot be accepted.******************************************************** October 2020 Notice ******************************************************Please be advised that System Sensor has decided to phase out the legacy SYNC-1 daughter card accessory. System Sensor will continue to offer the MDL sync modules which can be used as an alternative to the SYNC-1. Another system design alternative is to use a power supply with NAC outputs with the System Sensor sync protocol .The SYNC-1 accessory card is designed to operate with the six supervised control module (System Sensor model # SC-6). It works with System Sensor AV appliances which use the System Sensor sync protocol to provide a means of synchronizing the temporal-coded horns, the one-second flash timing of the strobe, and silencing the horns of the horn/strobe combination over a two-wire circuit while leaving the strobes active. A SYNC-1 accessory card enables a six supervised control module to synchronize a maximum of three Class A or six Class B notification appliance circuits (NACs). As an alternative to the SYNC-1, it is recommended that a design should use one to three MDL sync modules connected to the NAC inputs on the SC-6. To synchronize across multiple MDL modules, configure the modules in MASTER-SLAVE MODE (interconnected of the slave input and output). Zone 1 input supply power to each module must be continuous for group synchronization to be operational. Refer to MDL instruction manual for details.Please reference the System Sensor L-Series Audible Visible Notification Catalog to view our complete product offering and find the best alternative for your needs.The SYNC-1 accessory cards will remain available while supplies last as a critical component has gone obsolete and a compatible alternative is not available at this time.Compatibility Matrix: The SYNC-1 is compatible with the below six supervised control module cards:Please visit for more information.We appreciate your business and continued support of System Sensor products.BRANDDISCONTINUED MODEL NO.DESCRIPTIONALTERNATIVE MODULE(MULTIPLE MAY BE REQUIRED)AGENCY TYPESYSTEM SENSORSYNC-1SYNC-1 ACCESSORY CARDMDL3W OR MDL3RUL。