AETOS艾拓思每日焦点：三大因素致黄金暴跌,隔夜下挫0.5%
智能电源说明书
TAA SmartPro 120V 3kVA 2.88kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9MODEL NUMBER:SM3000RMXL2UTAADescriptionSmartPro® Line-Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line-Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. This unique configuration excels in exceptionally poor power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD/LED interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96-percent line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional slot for network management card options. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and macOS. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert® UPS monitoring and auto shutdown software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LED/LCD display panel easily rotates for viewing in rack-mount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.FeaturesCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchasesqSM3000RMXL2UTAA line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity and extended runtime optionsqLine interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145VqNEMA L5-30P input plug; 8 NEMA 5-15/20R and 1 L5-30R output receptacles, Two independently switchable output load banksqMaintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltagesqHigh 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions qInternal batteries offer 10 minutes at 50% load (1440W) and 3 minutes at 100% load (2880W)q Highlights3kVA / 3000VA / 2880W lineinteractive 2U rack/tower UPS,Sine WaveqExtended runtime options up to2880W, 0.9 Power Factor,Interactive LCD interfaceqUSB, RS232, EPO and slot fornetwork management cardoptionsqNEMA L5-30P input; 8 NEMA 5-15/20R & 1 L5-30R outletsqTAA Compliant for GSASchedule purchasesqTo use the Auto Probe feature,this product requires aWEBCARDLXE networkinterface (sold separately)running LX firmware update20.2 or laterqPackage IncludesSM3000RMXL2UTAA UPSsystemqPowerAlert Software with USB,Serial & EPO cablingq4 post rackmount installation kit qInstruction manualqSpecificationsExtended runtime is available with optional BP48V24-2U / BP48V242UTAA (limit 1) OR BP48V60RT3U / BP48V60RT3UTAA (no limit)qExternal battery configurations require the use of External Battery Configuration Software (see manual)q Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipmentqFollowing an extended power outage, the UPS will automatically restart into line-power mode, begin powering connected equipment and recharge the battery system, all without user interactionqFront panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information qLCD interface also supports a number of advanced user setup and operating preferencesq Ships with 4-post rack-mount installation hardware; Optional 2POSTRMKITWM enables 2-post rack-mount/wallmount installation; Optional 2-9USTAND enables tower placementqBuilt-in USB, RS-232 and optional slot for network management card options; Compatible with UPS management card options TLNETCARD and WEBCARDLXEqHID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and macOSqUSB & Serial ports enable data-saving unattended shutdown when used with PowerAlert software,available via FREE download from /products/power-alert qBuilt-in Emergency Power Off (EPO) interface with cableq© 2023 Eaton. All Rights Reserved. Eaton is a registered trademark. All other trademarks are the property of their respective owners.。
cloverdays各条线的简单感想（含轻微剧透）
cloverdays各条线的简单感想（含轻微剧透）这是alcot十周年的企划制作，正如宫藏之前在访谈中提到的，这是一个“回归原点之作”。
字面上来说，clover days的确回到了alcot的原点——题名，双子，故事结构，结尾彩蛋，故事主题等方面都与alcot出道作clover hearts十分类似。
而在经历了十年的发展，制作者们对于剧本和人物的把握显然也愈加得心应手，因此这样一部，继承了十年前的故事风格，又以alcot那富含特色的文字风格描写出来的几个描述“家族”及“幸福”的故事，不仅无愧于十周年企划之名，也可称之为一个“回归原点的王道纯爱作”結橋泉：楠原ゆい的表现很棒，最近也开始活跃了，十分值得期待(舔)，故事本身贴近于普通废萌，矛盾点主要体现在泉与其父亲的关系上，而最后的爆发点与同为濑尾顺执笔的あえて無視するキミとの未来比较类似，也是因为这个原因使得我对这条线的评价比つばめ稍微高一点……竜胆つばめ：安定的远野，因为胸部原因对名角色的的好感度一直比较低……但不得不提，虽然很多H要素也是alcot惯用的，但这几个scene真好看啊……故事更加像一个普通废萌，爆发点也主要集中在几个人物的感情冲突上，但在写作上多次“在话剧的彩排中使人物表达自己的想法”，给人一定的冲击力，某种程度上也反映了宫藏的功力。
虽然故事并无什么很大的亮点，但读起来还是一如既往的舒服，这也正是目前以宫藏为首的alcot给人的一贯印象吧。
加賀美ヘキル&ヒカル：首先，这个故事有着一个让我由衷感叹幸せならいいんだ的结局。
坦白说我完全没想到这2名角色会做一个双飞线。
道德上我比较难以接受这样的结局——毕竟这对我来说不是一个可以随便撸撸的凡作——但看着看着，我却再次认识到，alcot的剧本，是不会选择逃避他们自己提出的问题，也不会选择一种很都合的方式去解决这个问题。
游戏中明确提出了双飞在社会上所面临的问题。
但起码，游戏里给出了一些答案：先是某sub chara的'恋の形は、正しいものばかりじゃない。
Moxa ioLogik 2500 系列智慧乙太網路遠端 I O 裝置說明说明书
ioLogik2500系列具備Click&Go Plus邏輯的智慧乙太網路遠端I/O特色與優點•具備Click&Go Plus控制邏輯的前端智慧，多達48項規則•與MX-AOPC UA伺服器進行的主動通訊•使用MX-AOPC UA日誌軟體自動補充斷線週期資料•內建4埠非網管型交換器，用於連接乙太網路裝置•用於菊鏈連接的I/O擴充連接埠，可連接多達8個ioLogik E1200裝置•三合一串列埠：RS-232、RS-422或RS-485•支援SNMP v1/v2c/v3•使用Windows或Linux版MXIO程式庫簡化I/O管理•提供寬操作溫度型號，適合-40至75°C（-40至167°F）環境認證簡介ioLogik2500智慧乙太網路遠端I/O裝置採用獨特的硬體和軟體設計，因此成為各種工業資料擷取應用的理想解決方案。
ioLogik2500的硬體設計包括4埠非網管型乙太網路交換器和2個串列埠，能夠無縫連接至各種現場裝置。
其中的一個乙太網路連接埠可用於連接8個菊鏈ioLogik E1200擴充模組，藉以提供100多個通道。
ioLogik2500做為「主機」裝置，使用Click&Go Plus邏輯控制整個I/O陣列。
最重要的是，只需要IP即可將整個I/O陣列連接至您的網路，為IP位址數量不足的工業現場提供完美的解決方案。
免程控Click&Go Plus™邏輯Click&Go Plus™控制邏輯支援多達48個規則和8個條件/動作。
此外，其圖形化使用者介面還提供3個邏輯閘和3個多層，協助您建構更強大、更有效率的IO解決方案。
您完成Click&Go Plus™邏輯規則的設定後，IOxpress易於使用的模擬功能可用於在將Click&Go Plus™規則上傳到您的線上裝置之前發現其中的潛在錯誤。
多協定資料集中器透過支援多種協定，ioLogik2500提高收集現場資料並傳送到上層系統的效率。
YONEX六大系列旗舰级羽拍综合大PK
2009年飞逝而去，本着“用不同的拍子验证自己技术”的精神，我一如既往地寻找和使用着YONEX六大主流系列的羽毛球拍，感受每个拍子特色鲜明的手感，享受羽毛球运动带来的健康和欢乐！又是一年春来到！在中羽我已经度过了3年的快乐时光，孟子曰：“独乐乐不如众乐乐”，羽毛球是需要交流和分享的运动，现将自己几年来用YONEX羽毛球拍的一些所思所感汇成陋文一篇，与中羽论坛的广大球友分享。
本文是2009年1月我在中羽论坛发表的原创作品《YONEX六大系列旗舰级羽拍综合大PK》的续集，即在原先9款拍子评述的基础上，又新增了15款，同时，为保证本文评述标准的一致性，其中部分内容和数据来源于《YONEX六大系列旗舰级羽拍综合大PK》。
球的回球难度；杀球，较小甜点区的拍子在杀球时即有优势又有劣势，优势是杀球时只要击中甜点区，杀出的球一般又快又狠又准，有种台球中大力冲球入袋般的感觉，声音也很爆，劣势是如果没有一定的羽毛球击球基本功，在杀球的瞬间很难打到甜点区，并且如果打不中甜点区，杀球质量会很糟，瞬间就会造成攻防易位，使杀球者限于被动局面。
个人评分（五星满分）Cab30MS进攻性能：★★★★防守性能：★★★灵活性能：★★★☆技术需求：★★★★☆体力需求：★★★对Cab30MS的材质升级，“Elastic Ti”和“Ultra PEF”取代了“Ultimum Ti”。
同为3U的拍子，Cab35使用起来感觉要比Cab30MS轻灵一些，我想也许Cab30MS是加长型的缘故吧！Cab35给我最大的印象是爽快的手感和弹性出众的拍杆，由于圆头和标长拍挥拍迅捷的天然特性，从方头拍猛然变到Cab35，我竟然用了将近十天的时间去调整挥拍节奏和磨合最佳击球点，说句实话，截至目前我在换用其他拍子时，适应期从来没有这么长的，但现在Cab35回报给我的舒爽击球手感让我感到用这么“漫长”的时间去适应还是值得的。
另外，Cab35拍杆的弹性要明显好于Cab30MS，刚开始用Cab35时，由于担心标长拍在打高远球时击球点低，我总是下意识地加些力，致使回球经常出界，后来摸透Cab35脾性了，用九成力度就能达到用Cab30MS十成力量的效果。
无人深空255个星系名称
无人深空255个星系名称 English Answer：1. Aberfeldy.2. Ackney Knell.3. Addela's Folly.4. Adek's Anvil.5. Aelwyn's Rest.6. Aethra's Grace.7. Agamand's Cradle.8. Alaric's Helm.9. Aldebaran's Hope.10. Alexandria's Gift.11. Algol's Bastion.12. Alhena's Song.13. Alioth's Embrace.14. Alkaid's Vigil.15. Altair's Beacon.16. Aludra's Leap.17. Amalthea's Embrace.18. Andania's Heart.19. Andromeda's Veil.20. Antares' Wrath.21. Aquila's Talon.22. Ara's Cradle.23. Arcturus' Glow.24. Ariadne's Thread.25. Aries' Ram.26. Arjuna's Zenith.27. Artemis' Hunt.28. Asgard's Gate.29. Athena's Shield.30. Atria Nine.31. Atria Six.32. Atria Three.33. Auriga's Chariot.34. Aurora's Dawn.35. Babel's Tower.36. Balmung's Edge.37. Barnard's Star.38. Basilus' Cradle.39. Bellatrix's Fire.40. Betelgeuse's Blood.41. Boötes' Helm.42. Brahma's Breath.43. Brazen Bull.44. Broken Sword.45. Broken Spire.46. Broken Throne.47. Broken Wing.48. Broken World.49. Byblos' Blossom.50. Cadmus' Chain.51. Callisto's Cry.52. Camelot's Court.53. Canopus' Light.54. Capricorn's Horn.55. Carina's Gale.56. Cassiopeia's Throne.57. Castor's Twin.58. Centauri's Charge.59. Cerberus' Fang.60. Cetus' Maw.61. Chiron's Arrow.62. Circinus' Embrace.63. Clymene's Spark.64. Columba's Dove.65. Coma's Embrace.66. Coma's Key.67. Compasses' Guidance.68. Cor Caroli's Heart.69. Corona Australis' Crown.70. Corona Borealis' Diadem.71. Corvus' Clutch.72. Crater's Rim.73. Crucible's Forge.74. Crux's Altar.75. Cygnus' Wings.76. Cygnus' Rift.77. Cygnus X-1。
宇通客车产品手册说明书
S VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLA KS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECK TLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-LERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKE DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOV I-TRAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYDROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIM• UTES & VANS • PANTECHS • MINI BUSES • TRAYS & HIAB • PRIME MOVERS• SEMI TRAILERS• FLAT DECKS• A & B TRAILERS• EXTENDABLES• SKELS• DROP DECKS•TAUTLINERSUtes1T UteVans1T Van1.5T vanMini Buses (drivers available)s8 seater Mini Bus12 seater Mini Bus14 seater Mini Bus25 seater Mini BusLuggage TrailersPantechs3T Pantech with tail lift (auto or manual)6T Pantech with full tail lift6T Pantech with walk up board8T Pantech with tuck away tail lift8T Pantech with walk up board Tautliners6T Tautliner - 10 pallet with tail lift6T Tautliner - 10 pallet without tail lift8T Tautliner - 12 pallet with tuck away tail lift 8T Tautliner - 12 pallet without tail lift8T Tautliner - 14 pallet with full tail lift8T Tautliner - 14 pallet without tail lift12T Tautliner - 14 pallet with full tail lift 12T Tautliner - 14 pallet without tail lift Trays2T Tray with drop sides3T Tray with tail lift & gates6T Tray with or without gates8T Tray with or without gates12T Tray with container pins Prime MoversSingle rated with sleeperBDouble rated with sleeperBrand new Kenworths & Argosys available in automatic or manualHiab8T Tray with front mounted craneSemi TrailersFlat Decks40’ Flat Deck Tri Axle45’ Flat Deck Tri AxleExtendables19 mtr Flat Deck extendable18 mtr Drop Deck extendable21mtr Flat Extendable Tri AxleSkels40’ Skel with 3 way pins40’ Retractable Skel Tri axleOpen Drop Decks45’ Open Drop Deck with 3 way pins - With or without gatesTautliners45’ Flat Tautliner45’ Drop Deck Tautliner with mezz floor 45’ Drop Deck TautlinerA TrailersA Flat with container pinsA Drop Deck with mezzanine floorA+B SetsFlat open setsFlat Tautliner setsDrop deck Tautliner setsECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDAB RAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLAT-DECKS A-TRAILERS B-T XTENDABLES TRAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLAT-DECKS A -TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEM RAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERSShort or long term hireSouthern Cross Truck Rentals offer shortor long term rentals. Our vehicles can be hired as needed – hourly, daily, weekly or monthly.24 Hour emergency service Southern Cross Truck Rentals provides24 hour roadside assistance. In caseof emergency, breakdown or accident involving your hire vehicle call 4633 6100.1800TRUCKHIRE mobile AppIf you’re in and out of the office, why not download our App from the App Store for a quick quote.One way rentalsSouthern Cross offers One Way rentals from Sydney to most capital cities.Call us or visit our website to see our One Way deals.Corporate cardOur CorporateCard offers asignificant discountto businesses whichhave a large fleetor contracted drivers. To find out more about our Corporate Card contact our Sales Department.Truck & Driver Hire Equipment GuideLet us do the driving for youSouthern Cross Truck & Bus Driver Hiresupplies both truck & bus drivers.Depending on your job, you can choose tohire Southern Cross Truck & Bus Driver Hiredrivers either at an hourly or project rate.Included in your price are all drivers’workers’ compensation and travelrequirements and, having a fleet of over140 vehicles at our disposal, we can easilysupply vehicles should you require.S VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLA KS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECK TLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-LERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKE DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOV I-TRAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYDROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIMFor more informationCall 02 4633 6100or visit .auSouthern Cross Truck Rentals149 Smeaton Grange Road, Smeaton Grange NSW 2567• Long & short term hire • Vehicle relocations • Vehicle delivery• Vehicle pick up • One way rentals • Corporate card• Driver hire (LR to MC)• Truck & driver hire。
PRCA-S2-T-200 品牌电机旋钮阀说明书
PRCA-S2-T-200Rotary actuator for butterfly valves• Torque motor 160 Nm• Nominal voltage AC 24...240 V / DC 24...125 V • Control Open/close, 3-point• With 2 integrated auxiliary switchesTechnical dataElectrical dataNominal voltageAC 24...240 V / DC 24...125 V Nominal voltage frequency 50/60 HzNominal voltage rangeAC 19.2...264 V / DC 19.2...137.5 V Power consumption in operation 20 W Power consumption in rest position 6 WPower consumption for wire sizing with 24 V 20 VA / with 240 V 52 VAAuxiliary switch2x SPDT, 1 x 10° / 1 x 0...90° (default setting 85°)Switching capacity auxiliary switch 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V Connection supply / control Terminals 2.5 mm²Connection protective earth earth terminal Connection auxiliary switch Terminals 2.5 mm²Parallel operationYes (note the performance data)Functional dataTorque motor 160 Nm (parametrised for D6200W/WL)Manual override hand crank Running time motor 35 s / 90°Running time motor variable 30...120 s Sound power level, motor 68 dB(A)Position indicationMechanical, integrated Safety dataProtection class IEC/EN I, protective earth (PE)Protection class ULI, protective earth (PE)Degree of protection IEC/EN IP66/67Degree of protection NEMA/UL NEMA 4XEnclosure UL Enclosure Type 4X EMCCE according to 2014/30/EU Low voltage directive CE according to 2014/35/EUCertification IEC/EN IEC/EN 60730-1 and IEC/EN 60730-2-14UL ApprovalcULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1The UL marking on the actuator depends on the production site, the device is UL-compliant in any case Type of actionType 1Rated impulse voltage auxiliary switch 2.5 kV Pollution degree 3Ambient humidityMax. 100% RHPRCA-S2-T-200Safety dataAmbient temperature -30...50°C [-22...122°F]Storage temperature -40...80°C [-40...176°F]Servicingmaintenance-free WeightWeight 5.8 kgTechnical data•••••••Safety notesThis device has been designed for use in stationary heating, ventilation and air-conditioning systems and must not be used outside the specified field of application, especially in aircraft or in any other airborne means of transport.Caution: Power supply voltage!The device has a protective earthing. Incorrect connection of the protective earth can lead to hazards due to electrical shock.Only authorised specialists may carry out installation. All applicable legal or institutional installation regulations must be complied with during installation.Apart from the connection box, the device may only be opened at the manufacturer's site. It does not contain any parts that can be replaced or repaired by the user.The device contains electrical and electronic components and must not be disposed of as household refuse. All locally valid regulations and requirements must be observed.The two switches integrated in the actuator are to be operated either on power supply voltage or at safety extra-low voltage. The combination power supply voltage/safety extra-low voltage is not permitted.Fields of applicationInternal heatingParametrisable actuatorsSimple direct mountingManual overrideHigh functional reliabilityFlexible signallingProduct featuresThe actuator is particularly suitable for utilisation in outdoor applications and is protected against the following weather conditions:- UV radiation - Dirt / Dust - Rain / Snow - Air humidityAn internal heater prevents condensation buildup.Thanks to the integrated temperature and humidity sensor, the built-in heater automatically switches on/off.The factory settings cover the most common applications.The Belimo Assistant App is required for parametrisation via Near Field Communication (NFC) and simplifies commissioning. Moreover, it provides a variety of diagnostic options.The ZTH EU service tool provides a selection of both diagnostic and setting options.Simple direct mounting on the butterfly valve. The mounting orientation in relation to the butterfly valve can be selected in 90° (angle) increments.The valve can be manually operated using a hand crank. Unlocking is carried out manually by removing the hand crank.The actuator is overload protected, requires no limit switches and automatically stops when the end stop is reached.The actuator has one auxiliary switch with a fixed setting (10°) and one adjustable auxiliary switch (0...90°).PRCA-S2-T-200AccessoriesMechanical accessories Description TypePosition indicator and tappet shaft, F07, square 45° offset, SW 17, DN125 (300)ZPR01Tappet shaft, F07, square 45° offset, SW 17ZPR02Position indicator and tappet shaft, F05, square 45° offset, SW 14, DN80 (100)ZPR03Hand crank for PR/PM/JR actuator ZPR20Tools Description TypeBelimo Assistant App, Smartphone app for easy commissioning, parametrising and maintenance Belimo Assistant AppConverter Bluetooth / NFC ZIP-BT-NFC Service tool, with ZIP-USB function, for parametrisable andcommunicative Belimo actuators, VAV controller and HVAC performancedevicesZTH EUConnecting cable 5 m, A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socketZK1-GENElectrical installationCaution: Power supply voltage!Parallel connection of other actuators possible. Observe the performance data. Wiring diagramsAC 24...240 V / DC 24...125 V, open/close AC 24...240 V / DC 24...125 V, 3-pointAuxiliary switchPRCA-S2-T-200 Operating controls and indicators5Push-button and LED display greenOff:No power supply or malfunctionOn:In operationPress button:Triggers test run, followed by standard mode6Push-button and LED display yellowOff:Standard modeOn:Test run activeAuxiliary switch settingsNote: Perform settings on the actuator only in deenergised state.For the auxiliary switch position settings, carry out points 1 to 4 successively.1Gear train disengagementOpening the manual override cover and adjusting the hand crank.Manual override is possible.2Manual overrideTurn the hand crank until the desired switching position A is indicated and then removethe hand crank.3Auxiliary switchFor the auxiliary switch position settings, carry out points 1to 4 successively.Opening the auxiliary switch adjustment cover and adjusting the hand crank.Turn the hand crank until the arrow points to the vertical line.4TerminalsConnect continuity tester to S4 + S5 or to S4 + S6.If the auxiliary switch should switch in the opposite direction, rotate the hand crank by180°.PRCA-S2-T-200NFC connectionTool connection ServiceBelimo devices marked with the NFC logo can be operated with the Belimo Assistant App.Requirement:- NFC- or Bluetooth-capable smartphone- Belimo Assistant App (Google Play & Apple AppStore)Align NFC-capable smartphone on the device so that both NFC antennas are superposed.Connect Bluetooth-enabled smartphone via the Bluetooth-to-NFC Converter ZIP-BT-NFC to thedevice. Technical data and operation instructions are shown in the ZIP-BT-NFC data sheet.The actuator can be configured by the ZTH EU via the service socket.PRCA-S2-T-200 DimensionsFurther documentation• The complete product range for water applications• Data sheets for butterfly valves• Installation instructions for actuators and/or butterfly valves• General notes for project planning。
ACE武器前后缀参考
---------------------------------------------------
其他垃圾属性：
达文 等级需求-1
赫尔 等级需求-1
推动力 等级需求-2
潜水 等级需求-2
跳跃 等级需求-3
前后缀整理：（前面带@为加强缀，后带****为普通缀中更适合轻武器的）
------------加命中（+5%以上）---------------
@首领 命中+20.00%----------最小攻击+15% 最大攻击+15%
@赛宁 命中+20.00%----------最小攻击+15% 最大攻击+15%
凯茨 最小攻击+9%
光芒 最小攻击+8%--------------最大攻击+8% 命中+4.71%
引导者 最小攻击+7%--------------攻击距离+5%
十字军 最小攻击+7%--------------最大攻击+7%
斯露 攻击距离+7%
斯普林特 攻击距离+7%
------------加角度（2度以上）---------------
帕特科尔 有效角度+5.7
斯丁格 有效角度+5.7---------------最大攻击+8%
海瑟央格 有效角度+3.4
奇异 攻击速度-5%------------最小攻击+11%
迟钝 攻击速度-5%------------攻击距离+8%------------****
萨维斯 攻击速度-5%------------过热时间+18%
Ceracore UTC30 电容性陶瓷压力传感器说明书
Drucktransducer mit kapazitivem, keramischen DrucksensorAnwendungsgebietDrucktransducer für den Einsatz zur Druckmessung von flüssigen und gasförmigen Medien.Ihre VorteileTrockener kapazitiver Keramiksensor mit hochreiner Al 2O 3 Keramik •hohe Überlastfestigkeit •sehr gute Langzeitstabilität •hohe Korrosionsbeständigkeit•digitaler/analoger Signalausgang (SPI, UART, U)•kleine Baugröße•Messbereiche von 0 … 100 mbar (0 … 1,5 psi) bis 0 … 100 bar (0 … 1 500 psi)•optionaler Temperaturausgang, Schaltausgang •Sondermessbereiche auf AnfrageProducts Solutions ServicesTechnische Information Ceracore UTC30ProzessdruckmessungTI01296O/00/DE/01.1871393817Ceracore UTC302Endress+HauserInhaltsverzeichnisHinweise zum Dokument (3)Dokumentfunktion ............................3Verwendete Symbole ...........................3Begriffe und Abkürzungen .......................4Turn down Berechnung .........................5Arbeitsweise und Systemaufbau (6)Messprinzip .................................6CARMEN .. (6)Eingang ..................................7Gemessene Prozessgröße ........................7Messbereich (7)Ausgang (8)Ausgangssignal ..............................8Signalbereich und Ausfallsignal des Spannungsausgan-ges .......................................8Verhalten im Fehlerfall .........................8Totzeit, Zeitkonstante ..........................9Dynamisches Verhalten .........................9Dämpfung ..................................9Einschaltzeit ................................10Anwärmzeit .. (10)Energieversorgung (11)Versorgungsspannung .........................11Stromaufnahme .............................11Anschluss des Sensors . (11)Leistungsmerkmale (13)Referenzbedingungen .........................13Referenz-Genauigkeit ..........................13Langzeitstabilität . (13)Montage (13)Einfluss der Einbaulage ........................13Umgebung (14)Umgebungstemperaturbereich ....................14Lagerungstemperaturbereich .....................14Schutzart ..................................14Klimaklasse ................................14Elektromagnetische Verträglichkeit (EMV)...........14Überspannungsschutz .........................14Schwingungsfestigkeit .........................14Prozess (15)Prozesstemperaturbereich .......................15Prozesstemperaturbereich, Dichtungen ..............15Druckangaben (15)Konstruktiver Aufbau (16)Gerätehöhe ................................16Gehäuse ..................................17Prozessanschlüsse . (17)Werkstoffe (19)Zertifikate und Zulassungen (20)RoHS .....................................20Druckgeräterichtlinie 2014/68/EU (DGRL)...........20Externe Normen und Richtlinien ..................20Kalibration; Einheit ...........................21Dienstleistung ..............................21Werkszeugnisse (auf Anfrage)....................21Bestellinformationen .......................22Zubehör .................................22Ergänzende Dokumentation ..................23Kontaktadressen ..........................23Ceracore UTC30Endress+Hauser 3Hinweise zum DokumentDokumentfunktionDas Dokument liefert alle technischen Daten zum Gerät und gibt einen Überblick über die bestellba-ren Geräteausführungen und Zubehör.Verwendete SymboleWarnhinweissymboleSymbole für InformationstypenSymbole in GrafikenCeracore UTC304Endress+HauserCeracore UTC30Endress+Hauser 5Turn down BerechnungURL = URVLRV LRL A0036653Ceracore UTC306Endress+HauserArbeitsweise und SystemaufbauMessprinzipKernstück des UTC30 bildet das kapazitive keramische Sensorelement. Das Basismaterial Al 2O 3 ist eine gegen viele aggressive Gase und Flüssigkeiten hochbeständige Keramik. Zwei zylindrische Kera-mikteile (Prozessmembran und Grundkörper) werden mechanisch hochfest und hermetisch dicht miteinander verbunden. Bei Absolutdrucksensoren bleibt das im Herstellprozess erzeugte Vakuum von 3,0 x 10-6 mbar zwischen Prozessmembran und Grundkörper dauerhaft bestehen. Das ermög-licht Druckmessungen bezogen auf das Vakuum. Bei Relativdrucksensoren wird die Rückseite der Prozessmembran belüftet, d.h. dieser Sensor misst den Überdruck relativ zum Atmosphärendruck.Das Sensorelement stellt elektrisch einen Plattenkondensator dar, dessen Kapazitätsänderung das Maß für die Druckänderung ist. Das kapazitive Messverfahren erfüllt höchste Anforderungen an Auflösung und Reproduzierbarkeit. Zusammen mit dem hysteresefreien Verhalten des Materials Al 2O 3 bildet es die Basis für die sehr guten technischen Daten des Drucktransducers. Zusätzlich ist das Sensorelement eine trockene Messzelle, d.h. es gibt keine Trennmembran oder Ölfüllung, welche die Messung beeinflussen könnte. Ein weiterer entscheidender Vorteil des kapazitiven keramischen Sensors ist seine hohe Überlastfestigkeit. Nach der Wegnahme der Überlast kehrt die Prozessmemb-ran ohne Schaden und ohne Hysterese in die Ausgangslage zurück.A Relativdruck-ZelleB Absolutdruck-Zelle 1Cr-Elektrode 2Cp-Elektrode 3Lotring4Gegenelektrode 5Grundkörper 6Prozessmembran p atm AtmosphärendruckCARMENDer ASIC CARMEN wird in Sensoranwendungen genutzt um physikalische Größen (z.B. Druck) durch externe kapazitive oder resistive Sensoren in industrieller Umgebung zu messen.Jeder Sensortyp hat seine individuellen Eigenschaften. Diese physikalischen Eigenschaften müssen durch CARMEN individuell kompensiert werden. CARMEN führt dabei folgende Aufgaben aus:•Messung des externen Sensors (Kapazitätsdifferenz, Spannungsdifferenz, Temperatur)•Kompensation von Sensoroffsets •Anpassung der Verstärkung•Linearisierung der Sensorcharakteristik •Kompensation von Temperatureffekten•Ausgabe der korrigierten und kompensierten Messwerte •zusätzliche Funktionen (Dämpfung, Filterung, etc.)Erläuterungen zur Funktionalität und Kommunikation sind in den S&C CARMEN Manuals aufge-führt → 23Ceracore UTC30Endress+Hauser 7EingangGemessene Prozessgröße•Relativdruck oder Absolutdruck •Temperatur Messbereich1)höher auf Anfrage 2)auf AnfrageCeracore UTC308Endress+HauserAusgang1)Auf AnfrageSignalbereich und Ausfallsig-nal des Spannungsausganges1Kalibrierter Messbereich 2Erweiterter MessbereichDer Signalbereich sowie das Ausfallsignal ist an NAMUR NE 43 angelehnt. Das Ausfallsignal ist kon-figurierbar.Verhalten im Fehlerfallsiehe S&C CARMEN ManualCeracore UTC30Totzeit, Zeitkonstante Darstellung der Totzeit und der Zeitkonstante:1% des MesswertesDynamisches Verhalten 1)Die maximal einstellbare Messrate zur Messwertaufnahme beträgt 1,25 ms, allerdings ist die maximale Geschwindigkeit des Digitalausgangs auf2,5 ms begrenzt.Dämpfung Kundenspezifisch einstellbar: 0...40 sEndress+Hauser9Ceracore UTC3010Endress+HauserEinschaltzeitDie Einschaltzeit ist die verstrichene Zeit vom Einschalten der Versorgungsspannung bis zur Bereit-stellung des ersten Digitalwertes bzw. initialem Analogwert.1)Die maximal einstellbare Geschwindigkeit zur Messwertaufnahme beträgt 1,25 ms, allerdings ist die maxi-male Geschwindigkeit des Digitalausgangs auf 2,5 ms begrenzt.AnwärmzeitDie Anwärmzeit ist die verstrichene Zeit vom Einschalten der Versorgungsspannung bis zum ersten digitalen Messwert bzw. Analogwert innerhalb der spezifizierten Referenzgenauigkeit (z.B. 0,1 %Spanne).1)Die maximal einstellbare Geschwindigkeit zur Messwertaufnahme beträgt 1,25 ms, allerdings ist die maxi-male Geschwindigkeit des Digitalausgangs auf 2,5 ms begrenzt.Energieversorgung1)andere Werte auf AnfrageStromaufnahme‣Auf korrekte Polung achten.HINWEISFalscher analoger Messwert durch Leitungsbruch von GND!‣Leitungsbruch von GND verhindern.Buchsenleiste 2x5 Pins (1,27 mm (0,05 in) Raster)Stiftleiste 2x5 Pins (2,54 mm (0,1 in) Raster)LeistungsmerkmaleReferenzbedingungen•nach IEC 60770•Umgebungstemperatur T U = konstant, im Bereich: +23 … +27 °C (+73 … +81 °F)•Relative Feuchte j = konstant, im Bereich: 5 ... 80 % r.F.•Umgebungsdruck p U = konstant, im Bereich: 860 … 1060 mbar (12,47 … 15,37 psi)•Lage der Messzelle = konstant, im Bereich: Prozessmembrane zeigt nach unten (siehe auch Kapitel"Einfluss der Einbaulage" → 13)•Messspanne URL - LRL•Werkstoff der Prozessmembran: Al2O3 (Aluminium-Oxid-Keramik FDA, hochrein 99,9 %)•Versorgungsspannung Analogausgang: 4,9...5,1 V DC•Versorgungsspannung Digitalausgang: 2,9 ... 5,5 V DCReferenz-Genauigkeit Die Referenzgenauigkeit enthält die Nicht-Linearität [DIN EN 61298-2 3.11] inklusive der Druck-hysterese [DIN EN 61298-23.13] und der Nicht-Wiederholbarkeit [DIN EN 61298-2 3.11] gemäßder Grenzpunktmethode nach [DIN EN 60770].LangzeitstabilitätMontageEinfluss der Einbaulage Die Einbaulage ist beliebig, kann aber eine Nullpunktverschiebung verursachen.A BCA0035988UmgebungUmgebungstemperaturbe-reich –20 … +80 °C (–4 … 176 °F)Erweiterter Temperaturbereich –40 … +125 °C (–40 … +257 °F) (auf Anfrage)Lagerungstemperaturbereich–20 … +80 °C (–4 … 176 °F)Erweiterter Temperaturbereich –40 … +125 °C (–40 … +257 °F) (auf Anfrage)Elektromagnetische Verträg-lichkeit (EMV)Keine Spezifikation (offenes System)Überspannungsschutz 6 V DC (maximale Spannung für CARMEN ASIC)ProzessProzesstemperaturbereich–20 … +80 °C (–4 … 176 °F)Erweiterter Temperaturbereich –40 … +125 °C (–40 … +257 °F) (auf Anfrage) Prozesstemperaturbereich,DichtungenDruckangaben L WARNUNGDer maximale Druck für das Messgerät ist abhängig vom druckschwächsten Glied.‣Für Druckangaben siehe Abschnitt "Messbereich" → 7 und Abschnitt "Konstruktiver Aufbau"→ 16.‣Messgerät nur innerhalb der vorgeschriebenen Grenzen betreiben!‣Der Prüfdruck entspricht der Überlastgrenze der einzelnen Sensoren (Over pressure limit OPL =1,5 x MWP) und darf nur zeitlich begrenzt anliegen, damit kein bleibender Schaden entsteht.‣Die Druckgeräterichtlinie (2014/68/EU) verwendet die Abkürzung "PS". Die Abkürzung "PS" ent-spricht dem MWP (Maximum working pressure/max. Betriebsdruck) des Messgerätes.‣Dampfschläge sind zu vermeiden! Dampfschläge können Nullpunktdrifts verursachen. Empfeh-lung: Nach der CIP-Reinigung können Restmengen (Wassertropfen bzw. Kondensat) auf der Pro-zessmembran verbleiben und bei erneuter Dampfreinigung zu lokalen Dampfschlägen führen.Die Trocknung der Prozessmembran (z.B. durch Abblasen) hat sich in der Praxis zur Vermeidungvon Dampfschlägen bewährt.Konstruktiver AufbauGerätehöhe Die Gesamthöhe ergibt sich aus•der Höhe des Gehäuses und•der Höhe des jeweiligen Prozessanschlusses.In den folgenden Kapiteln sind die Einzelhöhen der Komponenten aufgeführt. Sie können dieGesamthöhe einfach ermitteln, indem Sie die Einzelhöhen zusammenaddieren. Sie können hierzufolgende Tabelle verwenden:1)Bei Wahl der Stiftleiste 2x5 Pins ist das Elektronikgehäuse montiert.1)Die Kapsel "AB" wird verwendet, wenn einer der Prozessanschlüsse der folgenden Seite ausgewählt wird.Werkstoffe Prozessberührende Werkstoffe1)Die US Food & Drug Adminsitration (FDA) sieht keine Einwände, Keramiken aus Aluminiumoxid als Ober-flächenmaterial in Kontakt mit Lebensmitteln einzusetzen. Diese Erklärung beruht auf den FDA- Nachwei-sen unserer Keramiklieferanten.TSE-Freiheit (Transmissible Spongiform Encephalopathy)Für alle prozessberührenden Gerätekomponenten gilt:•Sie enthalten keine Materialien tierischen Ursprungs.•Bei der Produktion und Verarbeitung werden keine Hilfs- und Betriebsstoffe tierischen Ursprungsverwendet.ProzessanschlüsseEndress+Hauser liefert Einschraubgewinde in Edelstahl entsprechend AISI 316L (DIN/ EN Werk-stoffnummer 1.4404 oder 1.4435) aus. Die Werkstoffe 1.4404 und 1.4435 sind in ihrer Festigkeit-Temperatur-Eigenschaft in der EN 1092-1: 2001 Tab. 18 unter 13E0 eingruppiert. Die chemischeZusammensetzung der beiden Werkstoffe kann identisch sein.Nicht-prozessberührende WerkstoffeZertifikate und ZulassungenRoHS Das Messsystem entspricht den Stoffbeschränkungen der Richtlinie zur Beschränkung der Verwen-dung bestimmter gefährlicher Stoffe 2011/65/EU (RoHS 2).Druckgeräterichtlinie 2014/68/EU (DGRL)Druckgeräte mit zulässigem Druck ≤ 200 bar (2900 psi)Druckgeräte (maximal zulässiger Druck PS ≤ 200 bar (2900 psi)) können nach der Druckgerätericht-linie 2014/68/EU als druckhaltende Ausrüstungsteile eingestuft werden. Wenn der maximal zuläs-sige Druck ≤ 200 bar (2900 psi) und das druckhaltende Volumen des Druckgerätes ≤ 0,1 l betragen, so unterliegt das Druckgerät der Druckgeräterichtlinie (siehe Druckgeräterichtlinie 2014/68/EU, Art.4, Absatz 3). Die Druckgeräterichtlinie beschreibt lediglich, dass das Druckgerät entsprechend der "guten Ingenieurspraxis in einem der Mitgliedsländer" entworfen und gefertigt werden muss.Begründung:•Druckgeräterichtlinie DGRL (PED) 2014/68/EU, Artikel 4, Absatz 3•Pressure equipment directive 2014/68/EU, Commission´s Working Group "Pressure", GuidelineA-05 + A-06Anmerkung:Für Druckgeräte, die Teil einer Sicherheitseinrichtung zum Schutz einer Rohrleitung oder einesBehälters gegen Überschreitung der zulässigen Grenzen sind (Ausrüstungsteil mit Sicherheitsfunk-tion entsprechend Druckgeräterichtlinie 2014/68/EU Art. 2, Abs. 4), ist eine gesonderte Betrach-tung vorzunehmen.Externe Normen und Richtli-nien Die angewandten Europäischen Normen und Richtlinien können den zugehörigen EG-Konformität-serklärungen entnommen werden. Es wurden außerdem angewandt:DIN EN 60770 (IEC 60770):Messumformer zum Steuern und Regeln in Systemen der industriellen Prozesstechnik Teil 1: Metho-den für Bewertung des BetriebsverhaltensMethoden zur Bewertung des Betriebsverhaltens von Messumformern zum Steuern und Regeln in Systemen der industriellen Prozesstechnik.DIN 16086:Elektrische Druckmessgeräte, Druckaufnehmer, Druckmessumformer, Druckmessgeräte Begriffe, Angaben in DatenblätternVorgehensweise zur Angaben in Datenblättern von elektrischen Druckmessgeräten, Druckaufneh-mern, Druckmessumformern.EN 61010-1 (IEC 61010-1):Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und LaborgeräteEN 60529:Schutzarten durch Gehäuse (IP-Code)Ceracore UTC30Endress+Hauser 21Dienstleistung Werkszeugnisse (auf Anfrage) 3.1 Materialnachweis, mediumberührte metallische Teile, EN10204-3.1 AbnahmeprüfzeugnisCeracore UTC3022Endress+HauserBestellinformationenAusführliche Bestellinformationen sind verfügbar:Im Produktkonfigurator auf der Endress+Hauser Internetseite:Produktkonfigurator - das Tool für individuelle Produktkonfiguration •Produktspezifische Konfigurationsdaten •Je nach Gerät: Direkte Eingabe von messstellenspezifischen Angaben wie z.B. Messbereich •Automatische Überprüfung von AusschlusskriterienZubehörCeracore UTC30Ergänzende DokumentationS&C CARMEN Manual - General InformationS&C CARMEN Manual - Digital OperationS&C CARMEN Manual - Analog OperationS&C CARMEN Manual - ParametersKontaktadressenInternet: Email: ******************************.comEndress+Hauser23*71393817*71393817。
熔断器说明书
Product featuresAgency information•UL Listed, Guide JDYX, File E19180•UL Recognition Card (4 A), Guide JDYX2, File E19180•CSA Certified, Class 1422-01, File 53787•PSE/JET, File 1641-31003-1001Ordering••Specify product code: Insert packaging code prefix before part number. E.g. BK -GMD-250-RSpecify option code if desired: For axial leads, insert “V” between catalog series and amp rating. E.g. BK -GMD-V-250-R•With TR2 packaging code, lead wire length is 19.05mmG M D5 mm x 20 mm Time-delay glass tube fuses•Time-delay, low breaking capacity •Optional axial leads available 5 x 20 mm physical size•Nickel-plated brass endcap construction •Designed to UL/CSA 248-14•Speci cationsVoltage Interrupting rating (A ) rating at r ated v oltage (50 Hz)Vac 250 Vac 125 Vac Typical DCTypical Typical Agency a pprovalsPart number c old r esistancem elting I 2t v oltage UL PSE CSA (A 2s )†d rop (mV)‡JETGMD-125-R 2503510,0009.910.0431800X X GMD-150-R 2503510,000 6.0650.0461200X X GMD-200-R 2503510,000 3.2150.201100X X GMD-250-R 2503510,000 2.4000.40950X X GMD-300-R 2503510,000 1.6250.65800X X GMD-315-R 2503510,000 1.5550.89750X X GMD-375-R 2503510,000 1.06450.89650X X GMD-400-R 2503510,0000.948 1.2600X X GMD-500-R 2503510,0000.629 1.4550X X GMD-600-R 2503510,0000.4425 3.1450X X GMD-630-R 2503510,0000.4475 3.1450X X GMD-750-R 2503510,0000.3065 4.7410X X GMD-800-R 2503510,0000.299 6.6380X X GMD-1-R 2503510,0000.199512310X X X GMD-1.2-R 25010010,0000.15816280X X X GMD-1.25-R 25010010,0000.12416245X X X GMD-1.5-R 25010010,0000.10725240X X X GMD-1.6-R 25010010,0000.90527220X X X GMD-2-R 25010010,0000.65542200X X X GMD-2.5-R 25010010,0000.4894195X X X GMD-3-R 25010010,0000.37145190X X XGMD-4-R25020010,0000.28300190URX*Interrupting ratings (Interrupting ratings for 125mA - 3A were measured at 70% - 80% power factor on AC. The interrupting ratings for 4A were measured at 100% power factor on AC)** Typical DC c old r esistance (measured at <10% of rated current)† Typical m elting I t (I t was measured at listed interrupting rating and rated voltage)‡ Typical v oltage d rop (voltage drop was measured at +20 °C ambient temperature at rated current)(Ω)**X© 2020 EatonAll Rights Reserved Printed in USAPublication No. 2019 April 2020Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin.EatonElectronics Division 1000 Eaton Boulevard Cleveland, OH 44122United StatesE /electronics GMD5 mm x 20 mm Time-delay glass tube fusesTechnical Data 2019Effective April 2020(0.5)5.2mm (+0.1/-0.2)(±(REF)(Dimensions - mmTime-Current CurvePackaging c odePackaging p ref i xDescriptionBK 100 fuses packed into a cardboard carton BK11,000 fuses packed into a poly bagTR21,500 fuses packed into tape on a reel (19.05mm lead wire length)Option c odeOption c odeDescriptionV Axial leads - copper tinned wire with nickel plated brass endcapsEaton is a registered trademark.All other trademarks are property of their respective owners.Follow us on social media to get the latest product and support information.。
Murata LQW03AW_00系列芯片电容器（芯片导纳）参考规格书说明书
CHIP COILS (CHIP INDUCTORS) LQW03AW□□□□00□ REFERENCE SPECIFICATION1. ScopeThis reference specification applies to chip coils (chip inductors) LQW03AW_00 series for general electronic equipment.2. Part Numbering(Ex.)LQ W 03 A W 5N4 J 0 0 DProductID Structure Dimension(L × W)ApplicationandcharacteristicCategory Inductance Tolerance Performance ElectrodespecificationPackagingD: taping*B: bulk*B: Bulk packing is also available (taping condition: however, products without reels are put in plastic bags).3. Part Number and RatingOperating temperature range -55°C to +125°C (including self-generated heat)Storage temperature range -55°C to +125°CCustomer Part numberMurataPart numberInductance Q(900 MHz)(Typicalvalue)DCresistance(Ω max.)Self-resonantfrequency(GHz min.)Ratedcurrent(mA) Nominalvalue(nH)ToleranceLQW03AW1N0C00D1.0C:±0.2nH 48 0.03 19.0 900 LQW03AW1N1C00D1.1C:±0.2nH 41 0.06 19.0 660 LQW03AW1N7C00D1.7C:±0.2nH 41 0.07 19.0 600 LQW03AW1N8C00D1.8C:±0.2nH 37 0.10 19.0 520 LQW03AW1N9C00D1.9C:±0.2nH 41 0.08 19.0 620 LQW03AW2N0C00D2.0C:±0.2nH 42 0.10 19.0 490 LQW03AW2N1C00D2.1C:±0.2nH 35 0.16 19.0 400 LQW03AW2N2C00D2.2C:±0.2nH 33 0.16 19.0 400 LQW03AW2N7C00D2.7C:±0.2nH 46 0.06 15.0 720 LQW03AW2N8C00D2.8C:±0.2nH 44 0.08 14.0 600 LQW03AW2N9C00D2.9C:±0.2nH 41 0.10 13.0 540 LQW03AW3N0C00D3.0C:±0.2nH 34 0.22 14.0 350 LQW03AW3N1C00D3.1C:±0.2nH 48 0.07 12.0 720 LQW03AW3N2C00D3.2C:±0.2nH 48 0.08 10.0 580 LQW03AW3N3C00D3.3C:±0.2nH 47 0.11 11.0 520 LQW03AW3N4C00D3.4C:±0.2nH 43 0.15 11.0 440 LQW03AW3N5C00D3.5C:±0.2nH 43 0.15 12.0 440 LQW03AW3N6C00D3.6C:±0.2nH 36 0.23 11.0 340 LQW03AW3N7C00D3.7C:±0.2nH 38 0.23 11.0 340 LQW03AW3N9C00D3.9C:±0.2nH 48 0.07 11.0 650 LQW03AW4N3J00D4.3 J:±5% 45 0.12 11.0 480 LQW03AW4N7J00D4.7 J:±5% 45 0.09 9.5 620 LQW03AW5N1J00D5.1 J:±5% 45 0.14 9.5 480 LQW03AW5N4J00D5.4 J:±5% 46 0.21 9.5 420 LQW03AW5N6J00D5.6 J:±5% 37 0.33 8.3 330 LQW03AW5N8J00D5.8 J:±5% 47 0.16 8.8 460 LQW03AW6N2J00D6.2 J:±5% 39 0.22 9.9 360 LQW03AW6N8J00D6.8 J:±5% 42 0.18 7.7 460 LQW03AW7N5J00D7.5 J:±5% 41 0.24 7.5 400 LQW03AW8N2J00D8.2 J:±5% 40 0.26 8.5 290Customer Part numberMurataPart numberInductance Q(900 MHz)(Typicalvalue)DCresistance(Ω max.)Self-resonantfrequency(GHz min.)Ratedcurrent(mA)Nominalvalue(nH)ToleranceLQW03AW8N7J00D8.7J:±5% 39 0.42 7.5 290 LQW03AW9N1J00D9.1J:±5% 46 0.22 6.4 460 LQW03AW10NJ00D10.0J:±5% 37 0.46 7.2 250 LQW03AW11NJ00D11.0J:±5% 37 0.47 7.0 260 LQW03AW12NJ00D12.5J:±5% 39 0.54 6.0 280 LQW03AW13NJ00D13.0J:±5% 39 0.54 5.9 280 LQW03AW14NJ00D13.5J:±5% 37 0.53 6.0 240 LQW03AW15NJ00D15.5J:±5% 38 0.60 5.7 230 4. Testing ConditionsUnless otherwise specified Temperature: ordinary temperature (15°C to 35°C)Humidity: ordinary humidity [25% to 85% (RH)]In case of doubt Temperature: 20°C±2°CHumidity: 60% to 70% (RH)Atmospheric pressure: 86 kPa to 106 kPa5. Appearance and DimensionsUnit mass (typical value): 0.23 mg6. MarkingNo marking.7. Electrical PerformanceNo.ItemSpecificationTest method7.1 InductanceMeet chapter 3 ratings.Measuring equipment: Keysight E4991A or the equivalentMeasuring frequency: Inductance 250 MHz 1.0 nH to 3.9 nH 100 MHz 4.3 nH to 15.5 nH Measuring conditions:Measurement signal level: Approx. 0 dBm Measurement terminal distance: 0.3 mm Electrical length: 10.0 mmMeasuring fixture: Keysight 16197APosition the chip coil under test as shown in the measuring example below and connect it to the electrode by applying weight. Measurement example:Measuring method: see "Electrical performance: Measuring method for inductance/Q" in the chapter"16. Appendix".7.2 QMeet chapter 3 ratings.7.3 DC resistance Meet chapter 3 ratings. Measuring equipment: digital multimeter 7.4 Self-resonantfrequency Meet chapter 3 ratings.Measuring equipment: Keysight N5230A or theequivalent7.5 Rated currentProduct temperature rise: 20°C max.Apply the rated current specified in chapter 3.8. Mechanical PerformanceNo.ItemSpecificationTest method8.1 Bending testNo significant mechanical damage or no sign of electrode peeling off shall be observed. Test substrate: glass-epoxy substrate (100 mm × 40 mm × 0.8 mm) Pressurizing speed: 1 mm/sDeflection: 2 mm Holding time: 5 s8.2 VibrationAppearance shall have no significant mechanical damage.Oscillation frequency: 10 Hz to 55 Hz to 10 Hz, for approx. 1 minTotal amplitude: 1.5 mmTest time: 3 directions perpendicular to each other, 2 h for each direction (6 h in total)No.ItemSpecificationTest method8.3 Solderability90% or more of the outer electrode shall be covered with new solder seamlessly. Flux: immersed in ethanol solution [including anactivator with a chlorine conversion value of 0.06(wt)%]with a rosin content of 25(wt)% for 5 s to 10 s. Solder: Sn-3.0Ag-0.5Cu solderPre-heating: 150°C±10°C/60 s to 90 s Solder temperature: 240°C±5°C Immersion time: 4 s±1 s 8.4 Resistance tosoldering heatAppearance: No significant mechanical damage shall be observed.Inductance change rate: within ±5%Flux: immersed in ethanol solution [including anactivator with a chlorine conversion value of 0.06(wt)%] with a rosin content of 25(wt)% for 5 s to 10 s. Solder: Sn-3.0Ag-0.5Cu solderPre-heating: 150°C±10°C/60 s to 90 s Solder temperature: 270°C±5°C Immersion time: 5 s±1 sPost-treatment: left at a room condition for 24 h±2 h9. Environmental PerformanceThe product is soldered on a substrate for test. No. Item Specification Test method9.1 Heat resistanceAppearance: No significant mechanicaldamage shall be observed.Inductance change rate: within ±5%Q change rate: within ±20%Temperature: 125°C±2°CTest time: 1000 h (+48 h, -0 h)Post-treatment: left at a room condition for 24 h±2 h 9.2 Cold resistanceAppearance: No significant mechanical damage shall be observed.Inductance change rate: within ±5% Q change rate: within ±20%Temperature: -55°C±2°CTest time: 1000 h (+48 h, -0 h)Post-treatment: left at a room condition for 24 h±2 h9.3 HumidityAppearance: No significant mechanical damage shall be observed.Inductance change rate: within ±5% Q change rate: within ±20%Temperature: 70°C±2°CHumidity: 90% (RH) to 95% (RH) Test time: 1000 h (+48 h, -0 h)Post-treatment: left at a room condition for 24 h±2 h 9.4 Temperature cycle Appearance: No significant mechanicaldamage shall be observed.Inductance change rate: within ±5% Q change rate: within ±20%Single cycle conditions:Step 1: -55°C±2°C/30 min±3 minStep 2: ordinary temperature/10 min to 15 min Step 3: +125°C±2°C/30 min±3 minStep 4: ordinary temperature/10 min to 15 min Number of testing: 10 cyclesPost-treatment: left at a room condition for 24 h±2 h10. Specification of Packaging10.1 Appearance and dimensions of tape (8 mm width/paper tape)A (0.52)B (0.65) t 0.75 max.(in mm)10.2 Taping specificationsPacking quantity (Standard quantity) 10000 pcs/reelPacking method The products are placed in embossed cavities of a base tape and sealed by a cover tape.Feed hole position The feed holes on the base tape are on the right side when the cover tape is pulled toward the user. JointThe base tape and the cover tape are seamless.Number of missing productsNumber of missing products within 0.025% of the number per reel or 1 pc., whichever is greater, and are not continuous. The specified quantity per reel is kept.10.3 Break down force of tapeBreak down force of cover tape5 N min.10.4 Peeling off force of cover tapeSpeed of peeling off 300 mm/minPeeling off force0.1 N to 0.6 N (The lower limit is for typical value.)10.5 Dimensions of leader section, trailer section and reelA vacant section is provided in the leader (start) section and trailer (end) section of the tape for the product. The leader section is further provided with an area consisting only of the cover tape (or top tape). (See the diagram below.)10.6 Marking for reelCustomer part number, Murata part number, inspection number (*1), RoHS marking (*2), quantity, etc. *1 Expression of inspection No.: □□ ○○○○(1) (2) (3)(1) Factory code(2) Date First digit: year/last digit of yearSecond digit: month/Jan. to Sep.→1 to 9, Oct. to Dec.→O, N, D Third, Fourth digit: day (3) Serial No.*2 Expression of RoHS marking: ROHS- Y ( ) (1) (2)(1) RoHS regulation conformity(2) Murata classification number10.7 Marking on outer box (corrugated box)Customer name, purchasing order number, customer part number, Murata part number, RoHS marking (*2), quantity, etc.FCover tapetape165°to 180゜10.8 Specification of outer boxDimensions of outer box(mm) Standard reel quantity in outer box (reel)WDH186 186 935* Above outer box size is typical. It depends on a quantity of an order.11. Caution11.1 Restricted applicationsPlease contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1) Aircraft equipment (2) Aerospace equipment (3) Undersea equipment (4) Power plant controlequipment(5) Medical equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (7) Traffic signal equipment (8) Disaster/crimeprevention equipment(9) Data-processing equipment (10) Applications of similar complexity and/or reliability requirements to the applications listed in the above11.2 Precautions on ratingAvoid using in exceeded the rated temperature range, rated voltage, or rated current.Usage when the ratings are exceeded could lead to wire breakage, burning, or other serious fault.11.3 Inrush currentIf an inrush current (or pulse current or rush current) that significantly exceeds the rated current is applied to the product, overheating could occur, resulting in wire breakage, burning, or other serious fault.11.4 Corrosive gasPlease refrain from use since contact with environments with corrosive gases (sulfur gas [hydrogen sulfide, sulfur dioxide, etc.], chlorine, ammonia, etc.) or oils (cutting oil, silicone oil, etc.) that have come into contact with the previously stated corrosive gas environment will result in deterioration of product quality or an open from deterioration due to corrosion of product electrode, etc. We will not bear any responsibility for use under these environments.12. Precautions for UseThis product is for use only with reflow soldering. It is designed to be mounted by soldering. If you want to use other mounting method, for example, using a conductive adhesive, please consult us beforehand.Also, if repeatedly subjected to temperature cycles or other thermal stress, due to the difference in the coefficient of thermal expansion with the mounting substrate, the solder (solder fillet part) in the mounting part may crack.The occurrence of cracks due to thermal stress is affected by the size of the land where mounted, the solder volume, and the heat dissipation of the mounting substrate. Carefully design it when a large change in ambient temperature is assumed.12.1 Land dimensionsThe following diagram shows the recommended land dimensions for reflow soldering.The land dimensions are designed in consideration of electrical characteristics and mountability. Use of other landdimensions may preclude achievement of performance. In some cases, it may result in poor solderability, including positional shift. If you use other land pattern, consider it adequately.a 0.23b 0.65c 0.4(in mm)WDLabelH12.2 Flux and solder usedFlux• Use a rosin-based flux that includes an activator with a chlorine conversion value of 0.06(wt)% to 0.1(wt)%. • Do not use a highly acidic flux with a halide content exceeding 0.2(wt)% (chlorine conversion value). • Do not use a water-soluble flux.Solder• Use Sn-3.0Ag-0.5Cu solder.• Standard thickness of solder paste: 80 μm to 100 μmIf you want to use a flux other than the above, please consult our technical department.12.3 Soldering conditions (reflow)• Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150°C max.Cooling into solvent after soldering also should be in such a way that the temperature difference is limited to 100°C max. Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of product quality. • Standard soldering profile and the limit soldering profile is as follows.The excessive limit soldering conditions may cause leaching of the electrode and/or resulting in the deterioration of product quality.Standard profile Limit profilePre-heating 150°C to 180°C/90 s±30 s 150°C to 180°C/90 s±30 s HeatingAbove 220°C/30 s to 60 sAbove 230°C/60 s max.Peak temperature 245°C±3°C 260°C/10 s Number of reflow cycles2 times2 times12.4 Reworking with soldering ironDo not perform reworking with a soldering iron on this product.12.5 Solder volumeSolder shall be used not to increase the volume too much.An increased solder volume increases mechanical stress on the product. Exceeding solder volume may cause the failure of mechanical or electrical performance.Limit ProfileStandard Profile90s±30s230℃260℃245℃±3℃220℃30s～60s60s max.180150Temp.(s)(℃)Time.12.6 Product's locationThe following shall be considered when designing and laying out PCBs.(1) PCB shall be designed so that products are not subject to mechanical stress due to warping the board. [Products direction]Products shall be located in the sideways direction (length: a < b) to the mechanical stress.(2) Components location on PCB separationIt is effective to implement the following measures, to reduce stress in separating the board.It is best to implement all of the following three measures; however, implement as many measures as possible to reduce stress.Contents of measures Stress level(1) Turn the mounting direction of the component parallel to theboard separation surface.A > D *1 (2) Add slits in the board separation part.A >B (3) Keep the mounting position of the component away from the board separation surface.A > C*1 A > D is valid when stress is added vertically to the perforation as with hand separation. If a cutting disc is used, stress will be diagonal to the PCB, therefore A > D is invalid.(3) Mounting components near screw holesWhen a component is mounted near a screw hole, it may be affected by the board deflection that occurs during the tightening of the screw.Mount the component in a position as far away from the screw holes as possible.12.7 Handling of substrateAfter mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product.Bending Twisting〈Poor example 〉〈Good example〉ba12.8 CleaningThe product shall be cleaned under the following conditions.(1) The cleaning temperature shall be 60°C max. If isopropyl alcohol (IPA) is used, the cleaning temperature shall be 40°Cmax.(2) Perform ultrasonic cleaning under the following conditions. Exercise caution to prevent resonance phenomenon inmounted products and the PCB.Item RequirementPower 20 W/L max.Time 5 min max.Frequency 28 kHz to 40 kHz(3) CleanerAlcohol-based cleaner: IPAAqueous agent: PINE ALPHA ST-100S(4) There shall be no residual flux or residual cleaner. When using aqueous agent, rinse the product with deionized wateradequately and completely dry it so that no cleaner is left.* For other cleaning, consult our technical department.12.9 Storage and transportationStorage period Use the product within 12 months after delivery.If you do not use the product for more than 12 months, check solderability before using it.Storage conditions • The products shall be stored in a room not subject to rapid changes in temperature and humidity.The recommended temperature range is -10°C to +40°C. The recommended relative humidityrange is 15% to 85%.Keeping the product in corrosive gases, such as sulfur, chlorine gas or acid, oxidizes theelectrode, resulting in poor solderability or corrosion of the coil wire of the product.• Do not keep products in bulk packaging. Doing so may cause collision between the products orbetween the products and other products, resulting in core chipping or wire breakage.• Do not place the products directly on the floor; they should be placed on a palette so that they arenot affected by humidity or dust.• Avoid keeping the products in a place exposed to direct sunlight, heat or vibration.Transportation Excessive vibration and impact reduces the reliability of the products. Exercise caution whenhandling the products.12.10 Resin coatingThe inductance value may change due to high cure-stress of resin to be used for coating/molding products.A wire breakage issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operatingcondition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some operating condition may cause corrosion of wire of coil, leading to wire breakage.So, please pay your careful attention when you select resin in case of coating/molding the products with the resin.Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your board.12.11 Handling of product• Sharp material such as a pair of tweezers or other material such as bristles of cleaning brush, shall not be touched to the winding portion to prevent the breaking of wire.• Mechanical shock should not be applied to the products mounted on the board to prevent the breaking of the core.12.12 Handling with mounting equipment• With some types of mounting equipment, a support pin pushes up the product from the bottom of the base (paper) tape when the product is sucked with the pick-up nozzle.When using this type of equipment, detach the support pin to prevent the breaking of wire on the product.• In some cases, the laser recognition function of the mounting equipment may not recognize this product correctly.Please contact us when using laser recognition. (There is no problem with the permeation and reflection type.)13. Note(1) Please make sure that your product has been evaluated in view of your specifications with our product being mounted toyour product.(2) You are requested not to use our product deviating from the reference specifications.(3) The contents of this reference specification are subject to change without advance notice. Please approve our productspecifications or transact the approval sheet for product specifications before ordering.14. AppendixElectrical performance: Measuring method for inductance/Q (Q measurement is applicable only when the Q value is included in the rating table.)Perform measurement using the method described below. (Perform correction for the error deriving from the measuring terminal.)(1) Residual elements and stray elements of the measuring terminal can be expressed by the F parameter for the 2-poleterminal as shown in the figure below.(2) The product's impedance value (Zx) and measured impedance value (Zm) can be expressed as shown below, by usingthe respective current and voltage for input/output.Zm=V1I1Zx=V2I2(3) Thus, the relationship between the product's impedance value (Zx) and measured impedance value (Zm) is as follows.Zx=αZm-β1-ZmΓHere,α=D/A=1β=B/D=Zsm - (1 - Yom Zsm) ZssΓ=C/A=YomZsm: measured impedance of short chipZss: residual impedance of short chip (0.480 nH)Yom: measured admittance when measuring terminal is open (4) Calculate inductance Lx and Qx using the equations shown below.Lx=Im (Zx)2πfLx: inductance of chip coilQx: Q of chip coilf: measuring frequencyQx=Im (Zx) Re (Zx)。
AMARI Callbox Ultimate产品说明说明书
Packaged in a plug and play integrated PC,AMARI Callbox Ultimate is an ideal solution for LTE and NR testing of all types of user equipment with advanced configuration.It acts as a 3GPP compliant eNodeB,gNodeB,EPC and 5GC allowing functional and performance testing of NR,LTE,LTE-A,LTE-M and NB-IoT devices.The offer is completed by an integrated IMS server as well as an eMBMS gateway for VoLTE and eMBMs testing.The Callbox is powered by a deployment quality LTE and NR software suite offering the same level of baseband functionality as an indoor/outdoor network.The Multi Gbps 4G/5G callboxAMARICallbox UltimateEPC/5GCeNodeB/gNodeBIMS ServereMBMS serverLINUX X86 CPU4 SDR 100MHz 4x4Easy ConfigurationEasy configuration thanks to JSON files with example configurations already included in each software release for eNodeB,gNodeB,EPC and 5GC.End to End Data TestingRunning on top of standard Linux in user space mode allowing easy integration with IP services and using of native Linux tools for throughput testing.Channel SimulationSimulation of different DL channel types as per 3GPP models specified in 36101specification.Test FeaturesTest features to override the nominal protocol behavior in order to simulate error cases.High Performance●Highly optimized software supporting multiple UEs and cells.●High data rates in LTE and NR supporting downlink and uplink rates of 5Gbps and 500Mbps Frequency AgnosticSupport of all FDD and TDD frequency bands even non standard ones allowing to test custom frequencies in Sub-6GHz.3GPP FeaturesEarly access to 3GPP features for rapid validation of features under development.Logging and MeasurementsSelective logging and display of all layers of 3GPP LTE and NR stacks as well as useful graphs and analytic tools.Automatic Test Setup and ScriptingExtensive WebSocket API allowing to send remote commands to eNodeB,gNodeB,EPC and 5GC to ease test automation.PC Specifications PCIe SDR SpecificationsDimensions H ×W ×D46.5 cm ×23.3 cm ×53.3 cm Number of PCIe SDR Cards4 Weight14kgCPU X86 architecture Power supply voltage100-240V AC Operating System Linux Fedora Dimensions H ×W ×D2cm ×11.5 cm ×21 cm Weight0.28kg Power supply voltage12 V DC input RF Coverage500 MHz to 6.0 GHz RF bandwidth200 KHz to 100 MHz Wireless range10 meters Operation mode FDD and TDD MIMO DL 4x4eNodeB Technical Specifications3GPP release LTE release14 Frequency bands All FDD and TDD bands in sub-6GHzBandwidth 1.4, 3, 5, 10, 15 and 20 MHz in LTE200 KHz for NB-IoT supporting all operation modes (in-band, guard band andstandalone). Supported number of UEs Up to 1000 UEs distributed within the configured cellsUE category0/1/2/3/4/5/6/7/9/10/11/12DL category up to 20UL category up to 13 Carrier aggregation Up to 8carriers in DL and 3 in UL allowing mixed FDD/TDD combinations in DL Transmission modes 1 (single antenna) and 2 to 10 (MIMO 4x4) Modulation schemes Up to 1024QAM in DL and 64QAM in UL AS encryption and integrity protection AES, SNOW3G, ZUC Handover Intra eNodeB, S1 and X2 handover supportIoT LTE category 0 and 1LTE-M cat M1NB-IoT cat NB1 and NB2 NB-IoT subcarrier spacing15 kHz and 3.75 kHzNetwork interfaces S1AP and GTP-U to EPCX2AP between eNodeBsM1 and M2 for eMBMSgNodeB Technical Specifications3GPP release Release 15Frequency bands FDD/TDD FR1 (< 6 GHz)Bandwidth Up to 100 MHzSubcarrier spacing All SSB/data subcarrier spacing combinationsMIMOUp to MIMO 4x4 in DLSupported modes NSA, SA Modulation schemes Up to 256QAM in DL and 256QAM in ULNR Split Bearer 3, 3a and 3xUse caseeMBBSupported number of cellsMax number of LTE cells 8Max number of 5G cells 2Max total number of cells8Configuration examplesLTE Only 8CC 20MHz 2x2, 4CC 20MHz 4x45G NSA: 2 5G NR TDD 100MHz 4x4 + 2 LTE 20MHz 4x4 or 2 5G NR FDD 50 MHz 4x4 + 2 LTE 20MHz 4x4SA: 2 5G NR TDD 100MHz 4x4 or 2 5G NR FDD 50 MHz 4x4NB-IoT 8 NB-IoT standalone cells, 8 LTE cells with 8 in-band or guard-band NB-IoT cellsLTE-M8 LTE cells with CAT M1 supportNetwork interfaces NG interface (NGAP and GTP-U) to 5GCCarrier AggregationUp to 2 carriers in SA and NSAEPC Technical SpecificationsNetwork elements Mobility Management Entity (MME), Serving Gateway (SGW), Packet DataNetwork Gateway (PGW), and Home Subscriber Server (HSS) all integratedwithin the same software component 3GPP release Release 14 NAS encryption and integrity protection AES, SNOW3G, ZUC USIM authentication XOR, Milenage, TUAK IP version IPv4 and IPv6 QoS Support of all LTE QCIs as well TFT and dedicated bearers Handover S1 based support Network interfaces S1AP and GTP-U to eNodeBRX for external IMS serverS6a for optional external HSS RAT NR, LTE, NB-IoT CIoT features control plane CIoT optimization, Non IP data delivery, Attach without PDNconnectivity Power saving features PSM and extended DRX IMS Server Technical SpecificationsNetwork elements Proxy-CSCF (P-CSCF), Interrogating-CSCF (I-CSCF), Serving-CSCF (S-CSCF), andHome Subscriber Server (HSS) all integrated within the same softwarecomponent ISIM authentication XOR, Milenage, TUAK Security features MD5, AKAv1 and AKAv2 for authentication and IPSec at transport level Network interfaces Rx interface for support of precondition and dedicated bearerCx interface for external authentication IP versions IPv4 and IPv6 Services Voice call, Video call, Voice echo test, Call hold, SMS over SIP and SMS over SG eMBMS Gateway Technical SpecificationsNetwork elements LTE eMBMS Gateway (eMBMS-GW) and Multi-cell Coordination Entity (MCU) Network interfaces M1 interface to eNodeB for user planeM2AP interface to eNodeB for control plane5G Core Technical SpecificationsNetwork elementsAccess and Mobility Management Function (AMF),Authentication Server Function (AUSF), Session Management Function (SMF) andUser plane Function(UPF)all integrated within the same software component3GPP releaseRelease 15NAS encryption and integrity protection AES, SNOW3G, ZUCIP versionIPv4, IPv4v6, IPv6 and unstructured PDUs supportUSIM authentication XOR, Milenage, TUAK 5G-AKANetwork interfacesNG interface (NGAP and GTP-U protocols) to several gNodeBsRX for external IMS serverQoS Configurable QoS flows PDUMulti PDU sessions supportWeb GUI interface for logging and analysis。
合金装备 和平行者 设计图
《合金装备和平行者》设计图全资料种别设计图名称获得地点手枪EZ GUN（LR）EXTRA OPS:032 機密書類回収第一个场景树荫下EZ GUN(MR)パスとデートパス泳装状態时使用言霊「眠れ･･･」。
用动作ボディチェック获得。
（言霊「眠れ･･･」需要英雄度到达115000时获得）PMEXTRA OPS:016 フルトン回収カミーノ・デ・ラーパ/三叉路北侧树下PB/6P9 MAIN OPS ザドルノフ捜索6通过后M1911A1 MAIN OPS サンディニスタ司令官接触通过后M1911A1カスタムEXTRA OPS:034 クレイモア回収地图西南的门内EXTRA OPS:050 完全ステルスバナネル・フルタ・デ・オロ/選別所终点前的仓库C96（RANK3）EXTRA OPS:020 S评价通过M19 EXTRA OPS:009 ターゲット射撃通过后カンプピストルOUTER_OPSの『敵前哨部隊の排除03』OUTER_OPSの『敵主力部隊の撃破01』支援補給マーカー射出器支援攻撃マーカー射出器バナナの栽培説明書EXTRA OPS:035ホールドアップ通过后散弹枪水平二連ショットガン MAIN OPS アマンダ追跡选别所的小房间水平二連(ゴム弾) EXTRA OPS:023 敵兵殲滅通过M37EXTRA OPS:028 アイテム奪取越过西端木箱的袋小路スパス12 EXTRA OPS:062 亡者の遺産通过后CAW OUTER_OPSの『敵拠点の制圧01』冲锋枪M16A1 (ショットガン)EXTRA OPS:023 敵兵殲滅ロス・カントス/渓谷桥下阶层东南方最里侧洞口M16A1（ショットガン＋レーザー）EXTRA OPS:046 完全ステルスカフェタル・アロマ・エンカンタド/精製所1层中央orカミーノ・デ・ラーバ/坂道东北的墙壁パトリオットEXTRA OPS:068 カズとデート使用ボディチェック让カズ气绝M16A1 (グレネード)EXTRA OPS:025 敵兵殲滅セルバ・デ・ラ・レチェ/ジャングルM16A1 (グレネード＋レーザー)EXTRA OPS:055 米兵救出S评价通过M16A1（スモークG）EXTRA OPS:026 敵兵殲滅米軍ミサイル基地/通用口机枪座里侧M16A1（スモークG＋レーザー）EXTRA OPS:066 ミサイル迎撃S评价通过M653 EXTRA OPS:059 心霊写真南端中央部集装箱上M653(グレネード) EXTRA OPS:047 完全ステルスセルバ・デ・ラ・レチェ/坂道中央M653(ショットガン) EXTRA OPS:048 完全ステルス通用口出口附近的集装箱上因为1个人上不去所以需要纸箱子或者使用スネークフォーメーション。
奶牛器材说明书
NoDescription List DS24030Catgut With Needle DZ $47.55DS24B30Braunamid With Needle Dz DZ $47.55DS30B20Braunamid With Needle Dz DZ $47.55HR2600Catgut With Needle DZ $42.15J0001Prod with Batteries EA $82.00J0003Bull Ring Medium Steel 2 1/2"ID EA $6.30J0003CCopper Bull Ring 2 1/2"ID-3"OD EA $13.50J0004Hug'S Teat Knife EA $36.00J0005Danish Teat Knife EA $15.00J0005STeat Knife Probe Pt W/Hook EA $16.50J0007Christensen'S Teat Scissors EA $70.00J0008Danish Teat Slitter EA $51.00J0009CCornell Teat Curette EA $15.60J0009LBLichty Teat Knife Blunt EA $19.50J0009LSLichty Teat Knife Sharp EA $19.50J0010Teat Blades 6Pk 6PK $15.00J0011BTeat Tumor Extractor 4.5mm EA $54.00J0012Teat Cannula Disposable 100*$5.70J0012DPlastic Teat Dilators 100*$21.00J0012XShort Nozzle Teat Cannula 100$12.00J0013LTeat Tube Ex Long W/Stylet DZ $19.50J0014LLarsen'S Teat Tube Card 36$74.00J0014LADr. Larsen's Test Tube for 3PK $9.00J0014LBDr Larson's Teat Tube for 10$37.00J0014TBTeat Bandage 5M EA $18.00J0015Cesarean OB Forceps EA $42.00J0015CBovine Cervical Forceps EA $52.00J0016Linde Embryotomy Knife EA $45.00J0017Embryotomy Knife EA $33.00J00180B Wire 10Mtrs EA *$29.90J0018CCase for Fetatome EA $51.00J0018HHauptner OB Wire EA $38.50J0018IInsert. Coil & Cleaning Brush EA $50.00J0018TThygesen Fetatome W/Coil EA $382.00J0018USUtrecht Fetatome With Insert EA $387.00J0018USD4Nut Cover Guide Hole EA $33.00J0019OB Double Action Hook EA $28.00J0019COstertag'S Blunt Eye Hook EA $9.00J0019HBHarm'S OB Hook Blunt EA $12.00J0019HSHarm'S OB Hook Sharp EA $12.00J0019RRuggeberg'S Dble Eye Hook EA $21.00J0019VVienna Double Eye Hook EA $39.00J0020OB Wire Guide EA $8.10J0020DOB Wire Drop Guide EA $9.00J0020HHauptner OB Wire Guide EA $59.50J0021OB Wire Handle & Container EA $39.00J0021HOB Wire Handle EA $13.50J0021LLyss OB Wire Handle EA $24.00J0021SSutter OB Wire Handle EA $21.00J0022Pig OB Forceps EA $25.50J0022APuppy OB Forceps EA $15.00J0022HMclean'S OB Forceps EA $36.00J0022TT-Bar Swine Snare EA $49.00J0023SOB Chain Handle EA $9.60J0024GLOB Chain Stainless 60"EA $62.00J0024GSOB Chain Stainless 30"EA $53.00J0024TT-Bar OB Chain Handle EA $40.50J0024VIVulva Insertion Needle EA $9.00J0024WOB Chain Handle EA $12.60J0024WHOB Chain Plated 45"EA $9.00J0024WLOB Chain Plated 60"EA *$10.50J0024WMOB Chain Handle W/Cover EA $9.00J0024WSOB Chain Plated 30"EA *$7.50J0024XLNylon Calving Strap 60"EA $16.50J0024XSNylon Calving Strap 30"EA $14.55J0025Perivaginal Tape 5M EA *$21.30JORGENSEN LABORATORIES, INC.Price list effective JULY 2022Page 1J0025UA Umbilical Tape 1/8" X 20yds EA*$12.00 J0025UB Umbilical Tape 3/8" X 20yds EA*$17.40 J0025UC Umbilical Tape 1/4" X 20yds EA*$15.40 J0026Buhner Suture Needle EA$24.00 J0026EN Ewe Prolapse Retainer Protainer EA$9.60 J0026G Gerlach'S Prolapse Needle EA$18.00 J0027G Chamber'S Equine Catheter EA$37.50 J0027R Bulb & Iv Pump EA$15.00 J0029SP JorVet Shoulder EA$19.00 J0029SPS JorVet Shoulder Small EA$19.00 J0031A10cc Hauptner Syringe EA$117.00 J0031B30cc Hauptner Syringe EA$101.00 J0031C50cc Hauptner Syringe EA*$101.00 J0031D01Comp.Grip 30/50cc Hauptner Syr EA$68.00 J0031D01A Hauptner Complete Grip 10cc EA$60.00 J0031D01E Hauptner Complete Grip 25cc EA$66.50 J0031D02Thumb Grip W/O Dos.Reg.30/50cc EA$21.00 J0031D02A Hauptner Thumb Grip L/R 10cc EA$28.00 J0031D02E Hauptner Thmb.Grip Ls/Reg.25cc EA$27.00 J0031D02R Hauptner Thmb Grip W/Regulator EA$42.00 J0031D03Haupt.Syr.Grip W/Ratchet EA$28.00 J0031D04Hauptner Syr.Lock Screw EA$3.00 J0031D05Hauptner Syr. Grip Spring EA$1.80 J0031D06Hauptner Syr. Ratchet W/Screw EA+$10.00 J0031D07Hauptner Ratchet Spring EA+$1.50 J0031D08Hauptner Dosage Reg. 30/50cc EA$26.00 J0031D08A Hauptner Dosage Regul. 10cc EA$24.00 J0031D08E Hauptner Dosage Regul. 25cc EA$24.00 J0031D08S Haupt.Sprng Clip for Dos.Reg EA$1.50 J0031D09A Hauptner Comp.Plung. 10cc EA$27.00 J0031D09B Hauptner Comp.Plung. 30cc EA$27.00 J0031D09C Hauptner Comp.Plunger 50CC EA$28.00 J0031D09E Hauptner Comp.Plung. 25cc EA$28.00 J0031D10A Hauptner Inner Rod 10cc EA$9.30 J0031D10B Hauptner Inner Rod 30cc EA$8.30 J0031D10C Hauptner Inner Rod 50CC EA$8.30 J0031D10E Hauptner Inner Rod 25cc EA$8.30 J0031D11A Hauptner Outer Rod 10cc EA$10.50 J0031D11B Hauptner Outer Rod 30cc EA$10.50 J0031D11C Hauptner Outer Rod 50CC EA$10.50 J0031D11E Hauptner Outer Rod 25cc EA$10.50 J0031D12Hauptner Plate Plunger 30/50CC EA$4.50 J0031D12A Hauptner Plate Plung. 10cc EA$4.50 J0031D12E Hauptner Plate Plung. 25cc EA$4.65 J0031D13Hauptner Tension Screw 30/50CC EA$4.50 J0031D13A Hauptner Tension Screw 10cc EA$4.50 J0031D14A Hauptner Metal Cover 10cc EA$16.50 J0031D14B Hauptner Metal Cover 30cc EA$16.50 J0031D14C Hauptner Metal Cover 50cc EA$18.00 J0031D14E Hauptner Metal Cover 25cc EA$21.00 J0031D15A Hauptner Glass Barrel 10cc EA$6.00 J0031D15B Hauptner Glass Barrel 30cc EA$6.00 J0031D15C Hptnr. Glass Barrel 50cc EA$6.00 J0031D15E Hauptner Glass Barrel 25cc EA$6.00 J0031D15PB Plastic Barrel 30cc EA$2.40 J0031D15PC Plastic Barrel 50cc EA$6.00 J0031D16Haupt. Washer Set Comp. 50/30C EA*$7.50 J0031D16A Hauptner Wash/Pack Set 10cc EA$7.50 J0031D16E Hauptner Wash/Pack 25cc EA$7.50 J0031D16M Haupt.Washer Set(Less#19)50/30SET+$6.75 J0031D16PR Piston Rubber Only EA$1.80 J0031D22Haupt Luerlck W/Endpl 30/50cc EA$7.50 J0031D22A Haupt Luerlock W/Endpl. 10cc EA$15.00 J0031D22DE Haupt Luerlock W/Endpl. 25cc EA$14.25 J0031D22DEM LL & End Plate - One Piece 25cc EA$9.50 J0031D22EA Endplate 10cc EA$4.50 J0031D23Kit Hauptner Syringe Repair EA$18.00 J0031E25cc Hauptner Minidose Syringe EA$115.00 J0032E Swiss Style Hoof Knife EA$27.50 J0032F Folding Hoof Knife W/Pick EA$12.75Page 2J0032HG Hoof Groover - Angled EA$18.00J0032HGS Hoof Groover - Straight EA$19.50 J0032HL Hauptner Hoof Knife Left EA$42.00 J0032HLE Hoof Knife Left-Economy EA$12.00 J0032HR Hauptner Hoof Knife Right EA$42.00 J0032HRE Hoof Knife Right Economy EA$12.00 J0032HSE Econ.Hoof Knife Set EA$60.00 J0032HWL Hauptner Hoof Knife Left EA$34.90 J0032HWR Hauptner Hoof Knife Right EA$34.90 J0032JL Jorvet Hoof Knife - Left EA$18.00 J0032JR Jorvet Hoof Knife - Right EA$18.00 J0032P Hoof Pick EA$2.25 J0032Z Loop Hoof Knife EA$21.00 J0033H Hoof Knife Hone EA$16.50 J0034Hoof Knife W/Double Edge EA$36.00 J0034AD Aesculap Double Edge Hoof Knife EA$24.30 J0034CL Hoof Knife Left 5/8"Blade EA$33.00 J0034CLE Hoof Knife-Left Economy EA$12.90 J0034CNL Hoof Knife 3/8"-Lh EA$24.00 J0034CNLE Hoof Knife Left-Economy EA$9.00 J0034CNR Hoof Knife 3/8"-Rh EA$24.00 J0034CNRE Hoof Knife Right Economy EA$9.00 J0034CR Hoof Knife Right 5/8" Blade EA$33.00 J0034CRE Hoof Knife-Right Economy EA$12.90 J0034CVL Hoof Knife - Left EA$24.30 J0034CVR Hoof Knife-Right EA$24.30 J0034KL Hoof Knife - Left EA$15.00 J0034KR Hoof Knife - Right EA$15.00 J0034L Small Loop Abscess Knife EA$50.00 J0034O Oval Hoof Knife EA$40.00 J0034S Hoof Searcher EA$9.00 J0035Steel Hoof Trimmer EA$167.00 J0035B Hauptner Hoof Tester EA$113.00 J0035D1spare Blades for Hoof Trimmer EA$47.00 J0035EC Ryding Hoof Tester EA$214.00 J0035F Adjustable Hoof Tester EA$145.00 J0035LP Hoof Tester Large EA$45.00 J0035P Hoof Tester Special Size EA$40.50 J0035XL Hoof Tester SS 21"EA$92.00 J0036B Latex Elastrator Bands100$3.00 J0036E Even Crush Emasculator EA$230.00 J0036ED1Center Bolt (J0036E)EA$23.00 J0036ED2Extra Crush Iece Screw EA$6.60 J0036FS Franks Emasculator S/S EA$105.00 J0036G Sands Emasculator EA$192.00 J0036GD3Ratchet Spring for Sands Emaculator EA$17.00 J0036HD Elastrator- Heavy Duty EA$21.00 J0036P Standard Emasculator EA$136.00 J0036ED1Center Bolt J0036E EA$20.00 J0036PD1Center Bolt EA$23.00 J0036S Small Emasculator 8"EA$99.00 J0036W White'S Mod.Emasculator 12"EA$240.00 J0036WD1Center Bolt J0036W EA$23.00 J0036WD2Extra Crush Iece Screw EA$16.00 J0036WS White'S Mod. Emasculator 8"EA$66.00 J0037Reimer Emasculator S/S EA$456.00 J0037C Reimer Emasculator S/S M09EA$495.00 J0037CD1Handle Spring-M09EA$13.00 J0037DCD2Ratchet-M09EA$27.00 J0037CD3Rachet Spring-M09EA$14.00 J0037CD5Center Bolt Wing Nut-M09EA$27.00 J0037CD6Center Bolt Washer-M09EA$9.00 J0037CD7Handle Spring Screw EA$6.00 J0037CD8Thumb Screw for Ratchet Spring EA$12.00 J0037CD13Cutting Handle Only EA$80.00 J0037D02Ratchet for Reimer EA$37.00 J0037E Chain Ecrasseur EA$450.00 J0037EMC Emasculatome 14"EA$157.00 J0037EMD Emasculatome 16"EA$166.00 J0037EME Emasculatome 19"EA$186.00 J0037H Hauptner Reimer Emasculator EA$920.00Page 3J0037K Knee Brace for Emasculatome EA$15.00J0037N Newberry Castrating Knife EA$33.00 J0037NB Newberry Blade EA$4.50 J0037S Serra Emasculator W/Ratchet EA$704.00 J0037SA Serra Emasculator Modified EA$780.00 J0037SAS Serra Modified S/S EA$565.00 J0037SS Serra Emasculator S/S EA$546.00 J0038Bayer Mouth Wedge EA$107.00 J0038DL Drinkwater Mouthgag Left EA$22.00 J0038DR Drinkwater Mouthgag Right EA$22.00 J0038F Frick'S Oral Speculum EA$27.00 J0038JM JorVet Equine Mouth Gag EA$699.00 J0038KPB Spare Rubber Block for Pony EA$25.50 J0038M Meier Equine Dental Wedge EA$67.00 J0038ML Millenium Equine Mouth EA$399.00 J0038MPS Mc Pherson Mouth Gag S/S EA$365.00 J0038MPSP McPherson Mouth Gag-Pony Size EA$354.00 J0038S Schoupe Eq Dental Wedge EA$60.00 J0038ZM Meister Equine Mouth Gag EA$840.00 J0040EK Equine Trocar / Cannula EA$143.00 J0040F Corkscrew Trocar Plastic EA*$7.20 J0040OM Oval Bloat Trocar Metal Handle EA$18.00 J0040RT Round Bloat Trocar (2 cannulas EA$21.00 J0041A Carnivore Dental Elev/Small EA$54.00 J0041B Carnivore Dental Elev/Medium EA$54.00 J0041C Carnivore Dental Elev/Large EA$54.00 J0041CC X Long Cross Cut Burr EA$24.00 J0041CR Crossley Rabbit Incisor Luxator EA$45.00 J0041E Columbia Curette Dbl. End EA$24.00 J0041EA Columbia Curette Dbl. End EA$24.00 J0041ES McCall Dental Scaler DBL End EA$14.00 J0041F Mc Calls Curette Dbl. End EA$24.00 J0041GF Molar Rasp Fine EA$62.00 J0041J Jacquette Scaler Dbl. End 2. 3ss EA$24.00 J0041JA Jacquette Scaler Dbl. End 6. 7ss EA$24.00 J0041JF Feline Fine Jacquette 11. 12EA$14.00 J0041JFS Feline Fine Jaquette EA$14.00 J0041JS Jacquette Supragingival Scaler EA$14.00 J0041K Kit- Basic Dental Prophy EA$105.00 J0041MC Rodent Molar Cutter EA$48.00 J0041MD Double Ended Mirror EA$23.00 J0041MDS Double Ended Mirror EA$23.00 J0041ME Rodent Molar Extractor EA$48.00 J0041MI Dental Mirror 22mm EA$10.50 J0041MID Dental Mirror Double Ended EA$23.00 J0041MIDS Dental Mirror Dble Ended EA$14.00 J0041MIS Dental Mirror Silicon Blue EA$14.00 J0041MR Crossley Molar Luxator EA$45.00 J0041R Molar Rasp - Rabbits EA$42.00 J0041RF Molar Rasp Fine-Diamond EA$102.00 J0041RK Rabbit Burr Kit3PK$110.00 J0041RKR Round Burr Only for J0041RK EA$21.00 J0041RKTS Taper Side Cut Burr 2.3mm EA$21.00 J0041SS Diamond Disc Safety Shield EA$124.00 J0041ST Soft Tissue Protector EA$98.00 J0041T Autoclaveable Double Layer EA$165.00 J0042Equine Molar Cutter EA$190.00 J0042A K-9 Tartar Scraper Triangular EA$5.70 J0042B K-9 Tartar Scraper Dbl Ended EA$21.00 J0042BS Dog Tartar Scraper DBL End EA$14.00 J0042D Dental Extractor Forceps EA$23.00 J0042E Dental Extractor Forceps EA$22.50 J0042F Dental Extractor Forceps EA$23.00 J0042G Dental Extractor Forceps EA$23.00 J0042H Pig Tooth Nipper EA*$23.00 J0042HS Pig Tooth Nipper S/S EA*$10.50 J0042J Dental Tartar Scraper #6EA$4.50 J0042K Equine Small Dental Forceps Set EA$92.00 J0042M Dental Scraper And File EA$7.50 J0042Q Dental Explorer/Measuring Prob EA$27.00 J0042QF Feline Fine Explor / Measuring EA$14.00Page 4J0042QFS Feline Fine Explorer / Probe EA$14.00J0042QS Silicon Dental Explorer /EA$14.00 J0042R Feline Dental Extractor EA$40.50 J0042S Subgingival Curette EA$15.00 J0042T Feline Dental Extractor EA$33.00 J0042W Double End Small Elevator EA$34.50 J0042WS Feline 2mm Dble Ended Elevator EA$14.00 J0042X Dental Root Tip Pick EA$20.25 J0042Y Double End Elevator 4mm EA$33.00 J0042YS Double End Elevator 4mm Silicone EA$14.00 J0043Equine Molar Forceps EA$90.00 J0043AB Burgess Wolftooth Set EA$113.00 J0043ABN Burgess Wolftooth Set Gen II EA$124.00 J0043B Short/Narrow Jaw Molar Extract.EA$180.00 J0043BM Short / Narrow Mini Equine EA$140.00 J0043H Wolftooth Extractor EA$52.00 J0043M Dental Elevator Medium EA$15.00 J0043RL Reynolds Tooth Ext Lower EA$94.00 J0043RU Reynolds Tooth Ext Upper EA$94.00 J0043S Dental Elevator Small EA$13.80 J0043W Wolftooth Elevator EA$25.50 J0043WB Wolftooth Elevator Blade EA$14.25 J0043X Equivet Cap Forceps W/ Flexible EA$228.00 J0043Y Wolftooth Elevator Set EA$99.00 J0043Z Burgess Wolftooth Elevator and Extractor EA$240.00 J0044Equine Humane Twitch EA$17.40 J0044A Equine Chain Twitch EA$53.00 J0044B Equine Nylon Twitch EA$52.00 J0045Set- Diagnostic EA$184.00 J0045A Otoscope EA$162.00 J0045AD1Otoscope Bulb EA$23.00 J0045AD4CONE (6MM X 80MM)EA$9.75 J0045AD5CONE (4MM X 80MM)EA$10.50 J0045AD6CONE (5MM X 58MM)EA$10.50 J0045D1BULB FOR OTOSCOPE EA$18.00 J0045D3D BULB OPTHALMOSCOPE EA$23.00 J0045D4CONE (6MM X 80MM)EA$9.75 J0045D5CONE (4MM X 80MM)EA$10.50 J0045D6CONE (5MM X 58MM)EA$10.50 J0046A Casey Classic Dog Collar 7.5cm10*$42.75 J0046AC Classic Transparent Collar 7.510$27.00 J0046B Casey Classic Dog Collar 10cm10*$25.65 J0046BCC Plast. Bird Collar 14Cm10$29.50 J0046C Casey Classic Dog Coll. 15Cm10*$34.20 J0046D Casey Classic Dog Coll. 20Cm10*$45.60 J0046DC Classic Transparent Collar 20cm10$49.80 J0046E Casey Classic Dog Coll. 25Cm10*$52.70 J0046F Casey Classic Dog Coll. 30Cm10*$65.55 J0046G Casey Classic Dog Coll.12.5Cm10*$31.35 J0046HC Classic Transparent Collar 40cm10$148.00 J0046J Classic Dog Collar 35cm10$122.00 J0046JC Classic Transparent Collar 35cm10$148.00 J0046R Rack for Dog Collars EA$204.00 J0046S Dog Collar Set 7 Sizes SET*$37.50 J0047JorVet Aural Hematoma Pad EA$6.00 J0047A Casey Clear Collar 7.5Cm10*$26.00 J0047B Casey Clear Collar 10Cm10*$25.65 J0047C Casey Clear Collar 15Cm10*$35.00 J0047D Casey Clear Collar 20Cm10*$42.75 J0047E Casey Clear Collar 25Cm10*$51.30 J0047EC Comfort Collar 25cm5PK$44.00 J0047F Casey Clear Collar 30Cm10*$62.70 J0047G Casey Clear Collar 12.5Cm10*$31.35 J0047RC Rodent & Rabbit Collar 5cm10$22.50 J0047UCA Under Construction Dog Collar10$28.60 J0049B Behney Ear Instrument EA$45.00 J0049C Wire Cutter EA$21.90 J0049F Buck Ear Curette Straight-Econ EA$12.00 J0049FG Buck Ear Currette Straight EA$18.00 J0049G Buck Ear Curette Curved EA$12.00 J0049HB Straight Ear Clamp 4"EA$45.00Page 5J0049HC Curved Ear Clamp 5"EA$80.00J0049HD Straight Ear Clamp 5"EA$46.00 J0049LT Laboratory Eartags100$45.00 J0049LTA Eartag Applicator EA$97.00 J0049LTAD1Spring & Screw for Applicator EA$7.50 J0049MA Schnauzer Ear Trim Clamp EA$39.00 J0049MB Boxer Ear Trim Clamp EA$39.00 J0049MC Doberman Ear Trim Clamp EA$39.00 J0049MD Great Dane Ear Trim Clamp EA$39.00 J0049ME Boston Terrier Ear Trim Clamp EA$39.00 J0049MS K-9 Ear Trim Clamp Set5PK$180.00 J0049P Billeau Ear Curette EA$25.50 J0049S Earcrop Cartilage Scissors EA$30.00 J0049WA Implants 2"6PK$24.00 J0049WB Implants 2 1/2"6PK$24.00 J0049WD Implants 3 1/2"6PK$24.00 J0049WE Implants 4"6PK$24.00 J0049X Martin Cartilage Scissors 8"EA$67.50 J0050A Danish Iv Ndle 14 Ga W/Case EA$25.50 J0050B Danish Iv Ndle 11 Ga W/Case EA$27.00 J0051A Canine Mouth Gag Small EA$15.75 J0051B Canine Mouth Gag Medium EA$16.50 J0051C Canine Mouth Gag Large EA$17.10 J0051D1RUBBER INSERTS FOR K-9 MOUTH PR$3.90 J0051F Feline Mouth Gag EA$18.00 J0051FD Plastic Inserts - Pair PR$3.90 J0051G Nazzy Ferret Mouth Gag EA$37.50 J0051H Nazzy Ferrett Gag - Large EA$40.00 J0051K Feline Stomach Tube Spec.EA$10.50 J0051M Canine Stomach Tube Spec.EA$10.50 J0051N Lge K-9 Stom.Tube Speculum EA$11.25 J0051Q Dental Wedge Small EA$21.75 J0051R Dental Wedge Large EA$21.75 J0051RDL Rodent Cheek Dilator - Large EA$21.00 J0051RDLX Cheek Dilator-Long EA$21.00 J0051RDS Rodent Cheek Dilator - Small EA$35.00 J0051RG Rodent Mouth Gag EA$75.00 J0051RGS Lightweight Rodent Mouth Gag EA$60.00 J0051RK Rabbit/ Rodent Dental Starter EA$200.00 J0051RR Dental Tooth Rasp EA$60.00 J0051RS Rodent Dental Spatula EA$24.00 J0051S Set- Avian Oral Spec. /3EA$64.00 J0051SBA Smith-Baxter Mouth Gag Sm EA$15.00 J0051SBB Smith-Baxter Mouth Gag Medium EA$15.00 J0051SBC Smith-Baxter Mouth Gag Lg EA$18.00 J0051SBD Smith-Baxter Mouth Gag Xl EA$21.00 J0051SBS Smith-Baxter Mouth Gag Set EA$66.00 J0051X Sm.Avian Oral Speculum EA$19.00 J0051Y Medium Avian Oral Speculum EA$22.00 J0051Z Large Avian Oral Speculum EA$26.00 J0052K Killian K-9 Vaginal Speculum EA$21.00 J0052P Polansky Vaginal Speculum EA$95.00 J0052T Equine Thorobred Vag.Speculum EA$70.00 J0053D01Rear Grip Roux Syringe EA$36.00 J0053D01B Rear Grip 10cc Roux Syringe EA$33.00 J0053D06Spring Holding Screw Roux EA$0.60 J0053D07Handle Connect/Screw Roux EA$6.45 J0053D13GUDGEON BOLT ROUX SYRINGE EA+$1.35 J0053D14Ratchet Tip Roux Syringe EA$6.00 J0053D18COMPRESS. SPRING ROUX EA+$0.45 J0053D20B DOSAGE WHEEL 10CC ROUX EA$6.00 J0053D24Front End & Ll 30/50cc Roux EA$12.00 J0053D24B ENDPLA.W/LUERLOCK 10CC ROUX EA$21.00 J0053D25Washer Set Roux Syringe EA+$3.30 J0053D25B WASHER SET 10CC ROUX EA$3.30 J0053D26ROUX GLASS BARREL 50CC EA$4.95 J0053D26A GLASS BARREL 30CC ROUX EA$4.95 J0053D26B Glass Barrel 10cc Roux EA$4.95 J0053D26P Plastic Barrel 50cc Roux EA$6.00 J0053D26R Barrel W/Ll 50cc Roux EA$10.50 J0053D27Metal Frame 50cc Roux EA$15.00Page 6J0053D27A METAL FRAME 30CC ROUX EA$15.00J0053D27B METAL FRAME 10CC ROUX EA$14.70 J0053D28Inner Rod 50cc Roux EA$9.00 J0053D28A INNER ROD 30CC ROUX EA$9.90 J0053D28B INNER ROD 10CC ROUX EA$9.90 J0053D30Rubber Piston Roux 30/50cc EA+$2.70 J0053D30B RUBBER PISTON 10CC ROUX EA$3.30 J0053D31DISC FOR PISTON 30/50CC ROUX EA$1.80 J0053D31B DISC FOR PISTON 10CC EA$3.30 J0053D32Outer Rod 50cc Roux EA$12.00 J0053D32A OUTER ROD 30CC ROUX EA$12.00 J0053D32B OUTER ROD 10CC ROUX EA$12.00 J0053D33Knurled Knob Roux Syringe EA$6.60 J0053D35SPRING FOR HANDLES EA$4.05 J0053D36DOSAGE WHEEL MINIDOSE 30CC EA$9.00 J0053D37OUTER ROD MINIDOSE 30CC EA$4.50 J0053D42Henke Set Screw EA$3.35 J0053D43HENKE STEEL BALL 4MM EA$1.95 J0053D44HENKE BALL SPRING EA$2.10 J0053D45HENKE REAR HANDLE COMPLETE EA$49.50 J0053D49HENKE DOSAGE WHEEL EA$21.00 J0053D51Henke Ratchet Clip EA$3.00 J0053D52Henke Ratchet Screw EA$3.00 J0053D53HENKE FORWARD HANDLE COMPLETE EA$42.00 J0053D54HENKE ROUX REPAIR KIT EA$24.00 J0053D55HENKE ROUX DOSAGE REPAIR KIT EA$19.50 J0053D56HENKE ROUX PLUNGER ROD REPAIR K EA$30.00 J0053DMD8Screw Cap EA$12.00 J0053F91Ferromatic Syringe 5cc M19EA$119.00 J0053FD02M FERROMATIC BARREL 5CC M86EA$9.90 J0053FD04WASHER PISTON FERROMATIC EA$3.00 J0053FD08DOSING DEVICE FERROMATIC EA$9.00 J0053FD08M FERROMATIC DOSING DEVICE M86EA$4.50 J0053FD12RUBBER VALVE FERROMATIC EA$3.00 J0053FD13OUTLET VALVE SPRING FERROMATIC EA$4.50 J0053FD1391Outlet Spring Valve M91EA$2.60 J0053FD14G VALVE HEAD NON-COLL BTTLE M91EA$39.00 J0053FD14V91Valve Screw EA$6.00 J0053FD15CLOSING CAP FERROMATIC EA$9.00 J0053FD19Screw Cap Ferromatic EA$4.50 J0053FD191FRAME M91 (Same as J 53VD 1M)EA$27.00 J0053FD19M Screw Cap - 07EA$12.00 J0053FD21CLOSING CAP FERROMATIC 5CC EA$7.50 J0053FD2291FRONT PIECE M91EA$35.00 J0053FD23LUERLOCK ADAPTOR EA$4.50 J0053FD27Piston Rod Assm. 3 4 5 6 Ferr EA$34.00 J0053FD28Rep.Kit 4 10 12 13 16 17 18 20EA$24.00 J0053FD2891Kit 91 Repair Ferromatic EA$33.00 J0053FD3291ATTACHMENT M91EA$6.00 J0053FD391PISTON M91EA$5.50 J0053FD591PISTON ROD & HANDLE M91EA$10.50 J0053FD691Ferromatic Front Screw EA$27.00 J0053FD791GUIDING CAP M91EA$6.00 J0053FD891DOSING DEVICE M91EA$6.00 J0053FD991FIXING NUT M91EA$3.60 J0053FM18Ferromatic Syringe 5cc M19EA$124.00 J0053FMD1Barrel Frame EA$25.00 J0053FMD10Washer EA$2.80 J0053FMD11Valve with Washer EA$6.00 J0053FMD12Valve Spring EA$2.40 J0053FMD13Front Part Luer Lock EA$26.00 J0053FMD14Washer EA$2.20 J0053FMD15Adaptor Plastic Bottles EA$41.00 J0053FMD16Washer EA$2.80 J0053FMD17Valve Screw EA$14.00 J0053FMD18Fixing Screw EA$19.60 J0053FMD19Closing Cap EA$6.00 J0053FMD2Screw for Front Part EA$19.00 J0053FMD20Washer EA$1.20 J0053FMD21Washer EA$1.30 J0053FMD22Adaptor Glass Bottles EA$41.00Page 7J0053FMD23Screw EA$13.00J0053FMD24Rubber Valve EA$3.10 J0053FMD25Valve Spring EA$2.80 J0053FMD26Valve Spring EA$2.80 J0053FMD27Universal Bottle Holder EA$18.00 J0053FMD28Universal Bottle Adaptor EA$2.40 J0053FMD29Universal Bottle Adaptor EA$2.40 J0053FMD2M Glass Barrel EA$9.55 J0053FMD30Gasket EA$1.40 J0053FMD31Spare Part Kit -EA$24.60 J0053FMD4Piston Rod EA$19.00 J0053FMD5Compressing Spring EA$2.80 J0053FMD6Dosing Sheath EA$12.00 J0053FMD7Fixing Nut EA$9.00 J0053FMD8Screw Cap EA$12.00 J0053FMD9Piston EA$14.00 J0053H Henke Roux Syringe 50cc EA*$64.00 J0053HA30cc Henke Roux Syringe EA*$61.50 J0053HB10cc Henke Roux Syringe EA*$68.00 J0053HFE50CC Roux Flexible Extension EA$64.00 J0053HRE50CC Roux Syringe Extension -EA$104.00 J0053V94Vetamatic 5cc Syringe 94EA$95.00 J0053VD01M METAL FRAME EA$30.20 J0053VD03M WASHER M86 & M91EA$2.60 J0053VD04M GLASS BARREL M86 & M91EA$9.90 J0053VD06SPRING SLEEVE EA$4.50 J0053VD07M VETAMATIC SPRING M86EA$6.00 J0053VD08M VETAMATIC DOS.SCRW. & TUBE M86EA$8.00 J0053VD09M VETAMATC DOSE FIXING NUT M86EA$5.40 J0053VD1094Screw Cap EA$6.00 J0053VD10M Vetamatic Screw Cap M86EA$4.20 J0053VD1294Piston W/Hole EA$4.50 J0053VD1494VALVE AND WASHER EA$6.60 J0053VD1794Front End EA$18.00 J0053VD17M VETAMATIC FRONT END M86EA$21.00 J0053VD22SINKER EA$4.50 J0053VD23TUBING EA$6.00 J0053VD24A Filler Needle 4 3/4"EA$21.00 J0053VD24B Filler Needle 7 1/2"EA$19.50 J0053VD24C Filler Needle 8.5"EA$21.00 J0053VD26Screw Cap Vetamatic M91EA$12.00 J0053VD28REPAIR KIT VETAMATIC EA$21.00 J0053VD2894REPAIR KIT EA$21.00 J0053VD28M VETAMATIC REPAIR KIT M86EA$24.00 J0053VD294Front Screw EA$10.50 J0053VD594PISTON ROD EA$28.00 J0053VD794COMPRESSION SPRING EA$3.60 J0053VD894DOSING SHEATH EA$6.00 J0053VD994FIXING NUT EA$2.40 J0054KA Kit - Castration # 10EA*$6.20 J0054KC Kit - Castration #12EA*$6.20 J0054KE Kit Castration #20 Blade EA*$7.60 J0054KF Kit Castration #21EA*$7.60 J0054KG Kit Castration #22 Blade EA*$7.60 J0054SA Scalpel Blade #10100*$49.00 J0054SB Scalpel Blades #11100*$49.00 J0054SC Scalpel Blades #12100*$49.00 J0054SD Scalpel Blades #15100*$49.00 J0054SE Scalpel Blades #20100*$49.00 J0054SF Scalpel Blades #21100*$49.00 J0054SG Scalpel Blades #22100*$49.00 J0055A Scalpel Blade Handle #3EA*$3.00 J0055B Scalpel Blade Handle #4EA*$3.30 J0055DA Disposable Scalpel #1010*$18.50 J0055DB Disposable Scalpel #1110*$18.50 J0055DC Disposable Scalpel #1210*$18.50 J0055DD Disposable Scalpel #1510*$18.50 J0055DE Disposable Scalpel #2010*$18.50 J0055DF Disposable Scalpel #2110*$18.50 J0055DG Disposable Scalpel #2210*$18.50 J0055GA German Scalpel Hdle #3EA$7.50Page 8J0055GB German Scalpel Hdle #4EA$7.50J0055PA Scalpel Hdl. Plastic #3EA$4.60 J0055PB Scalpel Hdl. Plastic #4EA$4.60 J0056Disp Sterile Umbilical Clamp EA$3.00 J0056B Umbilical Clamps50$22.00 J0056G Umbilical Hernia Clamp 14Cm EA$46.00 J0056HA Huston Umbl Clamp 5"EA$9.90 J0056HB Huston Umbl Clamp 7"EA$11.70 J0057Medium Grit Carbide Float Blade EA$115.00 J0057C Carbide Float Blade- Coarse EA$116.00 J0057F Carbide Float Blade EA$130.00 J0057S Short Carbide Float Blade EA$99.00 J0057SF Carbide Short Blade - Short EA$80.00 J0058CT Curved Float Blade T/C EA$37.50 J0058FT Flat Float Blade T/C EA$25.50 J0058HA Angle Shaft Less Blade EA$18.00 J0058HC House Float Comb. L/Blade EA$54.00 J0058HH Handle Only EA$21.00 J0058HQ Float With Hdle & Str Shaft EA$36.00 J0058HS Straight Shaft Less Blade EA$18.00 J0058HZ Float Handle & Angle Shaft EA$36.00 J0058L Universal Dental Float 26"EA$89.00 J0058P Proctor Dental Float EA$53.00 J0058S Universal Dental Float 20"EA$77.00 J0061B Technovit Wooden Blocks EA$1.80 J0061BH Hoof Blocks 3/4"EA$1.50 J0061BQ Hoofblock Orange EA$2.40 J0061BX Technovit Plastic Block EA$3.60 J0061LA Technovit Liq. 240CC EA*$22.80 J0061LB Technovit Liq 480CC EA*$35.70 J0061PA Technovit Pwdr. 500 gm EA*$49.00 J0061PB Technovit Pwdr. 1000gm EA*$92.00 J0061SL Cow Boot - Left EA$6.60 J0061SR Cow Boot - Right EA$6.60 J0061T12Kit - Technovit 12EA*$121.00 J0061T12H Technovit 12 Treatment Kit EA*$103.00 J0061T12W Technovit 12 Treatment Kit EA*$103.00 J0061T6Technovit 6 Treatment Kit EA*$73.00 J0061T6H Tech 6 Treatment Kit w/ Sm Wood EA*$59.50 J0061T6S Technovit 6 Treatment Kit W/EA*$70.50 J0061T6W Technovit 6 Treatment Kit EA*$66.40 J0061XL Smart Block Gray Left EA$5.90 J0061XR Smart Block Green Right EA$5.90 J0062S French Model Roaring Burr EA$18.90 J0062ST Strawberry Roaring Burr EA$30.00 J0063IV Set Funnel Style EA$11.40 J0063D1IV Latex Surgical Tubing 50Ft EA$43.00 J0063D1A I.V. Latex Tubing 50Ft EA$34.50 J0063D1B I.V. Latex Tubing 50Ft EA$56.00 J0064BL 5 Gal. IV Bag W/Adapt. 20L.EA$24.60 J0064SL Set- Complete IV 20L.EA$45.90 J0064T Willoughby Tubing EA$30.00 J0064TL Tubing Only W/Adapt.EA$30.00 J0065M Disp. Trans. & Infusion Set EA$3.75 J0067Pet Pill Dispenser DZ$14.40 J0068Eyelid Retractor EA$30.00 J0068B Barraquer Eyelid Speculum EA$37.50 J0068D Chalazion Forceps EA$18.00 J0068G Graefe Eyelid Speculum EA$15.00 J0068GW Graefe Eyelid Speculum EA$56.00 J0070C Mosquito Forceps Curved EA*$5.75 J0070CW Mosquito Forc.German Cvd EA$27.00 J0070S Mosquito Forceps Straight EA*$5.75 J0070SW Mosquito Forc German Str EA$27.00 J0071C Kelly Forceps Curved EA*$5.75 J0071CW Kelly Forc German Cvd EA$24.00 J0071S Kelly Forceps Straight EA*$5.75 J0071SW Kelly Forc German Str EA$25.00 J0072C Crile Forceps Curved EA*$6.80 J0072CW Crile Forc German Cvd EA$26.40 J0072DV DeBakey Vascular Clamp 23cm EA$272.00Page 9J0072RO Rochester-Ochsner Forceps Economy curved EA$7.50J0072ROW Rochester Oschner Forceps German Cvd EA$29.70 J0072RS Rochester Oschner Forceps Economy Straight EA$7.50 J0072RSW Rochester Oschner Forceps German Straight EA$31.00 J0072S Crile Forceps Straight EA*$6.80 J0072SW Crile Forc German Str EA$24.00 J0073C Ferguson Angiotribe Curved EA*$15.00 J0073CW Ferguson Angiotribe Curved EA$60.00 J0073S Ferguson Angiotribe Straight EA*$15.00 J0073SW Ferguson Angiotribe Straight EA$75.00 J0074A Bandage Scissors 5 1/2"EA*$6.00 J0074B Bandage Scissors 7 1/2"EA*$9.00 J0074HB Heavy Duty Cast/Band.Scissors EA$51.00 J0074WA Bandage Scis German 5 1/2"EA$28.50 J0074WB Bandage Scis German 7 1/2"EA$32.30 J0074X Knowles Bandage Scissors EA$27.00 J0075A Surg Scissors Curved S/B 5.5"EA*$5.35 J0075AW German Surg Sciss Cvd S/B 5.5"EA$22.00 J0075B Surg.Scissors Curved B/B 5.5"EA*$5.35 J0075BW German Surg Scissors Curved EA$22.00 J0075C Surg.Scissors Str. S/B 5.5"EA*$5.35 J0075CMW Metzenbaum Curved EA$30.40 J0075CMWL Metzenbaum Scissors Curved 7" -EA$55.00 J0075CW German Surg Scis Str S/B 5.5"EA$22.00 J0075D Surg.Scissors B/B Straight 5.5:EA*$5.35 J0075DW German Surgical Scissor Straigh EA$22.00 J0075E Surg.Scissors S/S Straight 5.5"EA*$5.35 J0075EW German Surg Sciss St. S/S 5.5"EA$22.00 J0075F Surg.Scissors Curved S/S 5.5"EA*$5.35 J0075FW German Surg Scis Cvd S/S 5.5"EA$22.00 J0075IWC Iris Scissors Curved EA$22.80 J0075IWS Iris Scissors Straight EA$22.80 J0075N Postmortem Scissors 7 3/4"EA$38.00 J0075SMW Metzenbaum Straight EA$30.00 J0075SMWL Metzenbaum Scissors Straight 7"EA$53.00 J0075TB Stevens Tenotomy Scissors Str EA$27.90 J0075TS Stevens Tenotomy Scissors Str EA$28.00 J0075U Universal Scissors Black EA*$10.00 J0075UBL Universal Scissors Blue EA$10.00 J0075UG Universal Scissor Green EA$10.00 J0075UMB Umbilical Scissor EA$7.00 J0075UR Universal Scissor Red EA$10.00 J0075US Universal Lister EA$9.75 J0075UY Universal Scissor Yellow EA$10.00 J0076Stitch Scissor EA*$5.40 J0076SW Germ Spencer Stitch Scissor EA$28.00 J0076W German Stitch Scissors EA$29.00 J0077AC Mayo Scissor Cvd EA*$8.25 J0077AS Mayo Scissor Straight EA*$8.25 J0077BC Mayo Scissor Serrated Cvd EA*$8.90 J0077BS Mayo Sciss. Serrated Straight EA*$8.90 J0077CWA Mayo Scis Cvd 5 1/2" German EA$24.70 J0077CWAL Mayo Scissors Curved 5.5" -EA$72.00 J0077CWB Mayo Scis Cvd 7"German EA$25.80 J0077SWA Mayo Sciss Str 5 1/2" German EA$22.80 J0077SWAL Mayo Scissors Str. 5.5" -EA$69.00 J0077SWB Mayo Scis Str 7"German EA$24.70 J0078A Mayo Hegar Needle Holder 6"EA$9.00 J0078B Mayo Hegar Needle Holder 7"EA$12.00 J0078WTA Mayo Hegar T/C 6"Ndle Hlder EA$96.00 J0078WTB Mayo Hegar T/C 7"EA$84.00 J0078X Crile-Wood Needle Holder EA$54.30 J0079A Olsen Hagar Needle Holder 6"EA$12.80 J0079B Olsen Hegar Needle Holder 7"EA$14.80 J0079WTA Olsen Hegar T/C 5 1/2" N.H.EA$96.00 J0079WTB Olsen Hegar T/C 6 1/2" N.H.EA$99.00 J0079WTBL Left Hand Olsen-Hegar Needle EA$150.00 J0079WTD Olsen Hegar T/C 7 1/2"EA$102.00 J0079WTXL Extra Long Needle Holder T/C EA$260.00 J0080Mathieu Needle Holder EA$16.40 J0080A Allis Tissue Forceps 6"EA$10.00Page 10J0080AW Germ. Allis Tissue 6"EA$27.00。
GaInP
!!太阳电池能为在轨运行的航天器提供长期0 稳 定 的 电 源!是 航 天 器 的 重 要 部 件/3%C-B$ 3%I)$3* 三 结 太 阳 电 池 由 3%C-B 顶 电 池0 3%I)中 电 池03*底 电 池 及 两 个 隧 穿 结 共 同 组 成/与传统的 4#和 3%I)单 结 太 阳 电 池 相 比! 其 具 有 结 构 稳 定 0可 靠 性 高 0寿 命 长 0小 型 轻 质 0 光 电 转 换 效 率 高 0光 吸 收 系 数 高 等 优 点 !目 前 已 成 为 空 间 电 源 系 统 的 核 心 元 器 件!广 泛 应 用 于 航天器的电 源 系 统 / &E' 基 于 工 艺 成 熟 度0性 价 比0可 靠 性 等 诸 多 因 素 综 合 考 量!URRU 年 后 国
摘要3%C-B$3%I)$3*三结太阳电池是当前 航 天 器 空 间 电 源 系 统 的 核 心 元 器 件!其 在 空 间 辐 射 环 境 中 遭受的辐照损伤会导致 太 阳 电 池 性 能 参 数 衰 降!甚 至 导 致 航 天 器 供 电 系 统 功 能 失 效/ 为 获 取 3%C-B$ 3%I)$3*三结太阳电池高能质子辐 照 损 伤 退 化 规 律!以 国 产 3%C-B$3%I)$3*三 结 太 阳 电 池 为 研 究 对 象!通过开展ERR F*K 质子不同注量下的辐照实验!分析质子位移 损 伤 诱 发 3%C-B$3%I)$3*三 结 太 阳 电池的开路电压"#,0#0短路电流"!)0#0最大 输 出 功 率 "?$ #0光 电 转 换 效 率 "T;;#等 辐 射 敏 感 参 数 的 退 化 规 律 和 损 伤 机 理 /结 果 表 明 %注 量 范 围 为 EQEREE 'UQEREU 0$ZU 时 !#,00!)00?$ 0T;;的 退 化 程 度 随 辐 照 注 量 的 增 加 而 增 大 !当 注 量 为 UQEREU0$ZU时 !?$ 和 T;;归 一 化 处 理 后 的 退 化 程 度 均 为 EHSPPf !与 #,0 和!)0相 比 !衰 减 更 严 重 /对 不 同 注 量 辐 照 所 得#,00!)00?$ 0T;;进 行 拟 合!获 得 了#,00!)00?$ 0T;;随 辐 照 注 量变化的特征曲线!根据该曲线可预估 3%C-B$3%I)$3*三结太阳电池不同注量下性能的衰减幅度/ 关 键 词 3%C-B$3%I)$3*三 结 太 阳 电 池 *质 子 辐 照 *位 移 损 伤 *辐 射 敏 感 参 数 中图分类号@MXX*@FXEY!!! 文献标志码I!!!文章编号ERRR9HXVE"URUV#EU9UVYP9RX */,ER=OJVP$'8D=URUV=',6<#%-=ROER
Oracle Sun Storage 系列产品的基准固件版本说明书
This document provides RAID and open systems array baseline firmware versions delivered with Oracle’s Sun Storage Common Array Manager 6.8.1.■Sun Storage 2500-M2Arrays and StorageTek 2500Series Arrays ■Sun Storage 6000Series,StorageTek 6000Series,and FlexLine Arrays ■Sun Storage J4000Series Arrays,Sun Storage F5100Flash Array,and Sun Blade 6000Disk Module Sun Storage 2500-M2Arrays and StorageTek 2500Series Arrays 1Note –For the StorageTek 2500Series,upgrading from an 06.xx.xx.xx controller version to 07.xx.xx.xx requires the use of an upgrade utility.Consult the Sun StorageTek 2500Series Array Firmware Upgrade Guide .If you attempt an upgrade that fails,you should contact a support representative.See ”Technical Support”.1.Sun Storage 2500-M2 Arrays is a different array series from StorageTek 2500 Series Arrays.Controller Version Firmware File251006.70.54.11nge/RC_06705411_desperado_apollo_1532.dlp 2510_exmoor07.35.67.10nge/RC_07356710_exmoor_apollo_1532.dlp 253006.70.54.11nge/RC_06705411_desperado_apollo_133x.dlp 2530_exmoor07.35.67.10nge/RC_07356710_exmoor_apollo_133x.dlp 2530-M207.77.13.11nge/RC_07771311_e10_777_26x0_apollo.dlp 254006.70.54.11nge/RC_06705411_desperado_apollo_1932.dlp 2540_exmoor07.35.67.10nge/RC_07356710_exmoor_apollo_1932.dlp 2540-M207.77.13.11nge/RC_07771311_e10_777_26x0_apollo.dlp NVSRAM Version Firmware File2510N1532-670843-001nge/N1532-670843-001.dlpSun Storage Common Array ManagerArray Baseline Firmware Reference, Version 6.8.12510_exmoor N1532-735843-002nge/N1532-735843-002.dlp2510-Simplex N1532-670843-901nge/N1532-670843-901.dlp2510_exmoor-Simplex N1532-735843-902nge/N1532-735843-902.dlp2530N133X-670843-001nge/N133X-670843-001.dlp2530_exmoor N133X-735843-002nge/N133X-735843-002.dlp2530-M2N2530-777843-006nge/N2530-777843-006.dlp2530-Simplex N133X-670843-901nge/N133X-670843-901.dlp2530_exmoor-Simplex N133X-735843-902nge/N133x-735843-902.dlp2540N1932-670843-001nge/N1932-670843-001.dlp2540_exmoor N1932-735843-002nge/N1932-735843-002.dlp2540-M2N2540-777843-006nge/N2540-777843-006.dlp2540-Simplex N1932-670843-901nge/N1932-670843-901.dlp2540_exmoor-Simplex N1932-735843-902nge/N1932-735843-902.dlpIOM Version Firmware File2500SAS0196nge/esm0196.esm2501-M20343nge/esm0343.esmDisk Drive Version Firmware FileH7220AA30SUN2.0T A28A disk/D_H7220AA30SUN2.0T_A28A_LCA.dlp HDS7250SASUN500G AV0A disk/D_HDS7250SASUN500G_AV0A_LCA.dlp HUA7210SASUN1.0T AC5A disk/D_HUA7210SASUN1.0T_AC5A_LCA.dlp HUA7250SBSUN500G AC5A disk/D_HUA7250SBSUN500G_AC5A_LCA.dlp HUA7275SASUN750G AC5A disk/D_HUA7275SASUN750G_AC5A_LCA.dlp HUS1514SBSUN146G SA04disk/D_HUS1514SBSUN146G_SA04_LCA.dlp HUS1530SBSUN300G SA04disk/D_HUS1530SBSUN300G_SA04_LCA.dlp HUS1530SCSUN300G A5C6disk/D_HUS1530SCSUN300G_A5C6.dlpHUS1560SCSUN600G A5C6disk/D_HUS1560SCSUN600G_A5C6.dlpHUS1573SBSUN72G SA04disk/D_HUS1573SBSUN72G_SA04_LCA.dlp ST31000NSSUN1.0T SU0F disk/D_ST31000NSSUN1.0T_SU0F_LCA.dlp ST31001NSSUN1.0T SM04disk/D_ST31001NSSUN1.0T_SM04_LCA.dlp ST314655SSUN146G0D92disk/D_ST314655SSUN146G_0D92.dlpST314656SSUN146G0B1C disk/D_ST314656SSUN146G_0B1C.dlpST32000NSSUN2.0T SM04disk/D_ST32000NSSUN2.0T_SM04_LCA.dlpST330055SSUN300G0D92disk/D_ST330055SSUN300G_0D92.dlpST330056SSUN300G0B1C disk/D_ST330056SSUN300G_0B1C.dlpST330057SSUN300G0805disk/D_ST330057SSUN300G_0805.dlpST340008SSUN0.4T0643disk/D_ST340008SSUN0.4T_0643.dlpST345056SSUN450G0B1C disk/D_ST345056SSUN450G_0B1C.dlpST35000NSSUN500G3AZY disk/D_ST35000NSSUN500G_3AZY_LCA.dlpST360057SSUN600G0805disk/D_ST360057SSUN600G_0805.dlpST373455SSUN72G0D92disk/D_ST373455SSUN72G_0D92.dlpST37500NSSUN750G3AZY disk/D_ST37500NSSUN750G_3AZY_LCA.dlpSun Storage6000Series,StorageTek6000Series,and FlexLine Arrays Note–For the6140,6540and FLX380array types,upgrading from a06.xx.xx.xx version to07.xx.xx.xx requires a special utility.Consult the Sun Storage6000Series Array Firmware Upgrade Guide.If you attempt an upgrade that fails,you should contact a support representative.See”Technical Support”.Controller Version Firmware File613006.60.22.10nge/RC_06602210_chromium2_apollo_288x.dlp614006.60.22.10nge/RC_06602210_chromium2_apollo_399x.dlp6140_allegheny07.60.56.10nge/RC_07605610_09q2_apollo_fc_399x.dlp618007.77.13.11nge/RC_07771311_e10_777_49xx_apollo.dlp654006.60.22.10nge/RC_06602210_chromium2_apollo_6091.dlp6540_allegheny07.60.56.10nge/RC_07605610_09q2_apollo_fc_6091.dlp658007.77.13.11nge/RC_07771311_e10_777_7091_apollo.dlp678007.77.13.11nge/RC_07771311_e10_777_7091_apollo.dlpFLX24006.60.22.20nge/RC_06602220_chromium2_silverado_288x.dlpFLX28006.60.22.20nge/RC_06602220_chromium2_silverado_588x_06600400.dlpFLX38006.60.22.20nge/RC_06602220_chromium2_silverado_6091.dlpFLX380_allegheny07.60.56.10nge/RC_07605610_09q2_apollo_fc_6091.dlpNVSRAM Version Firmware File6130N288X-660843-003nge/N288X-660843-003.dlp6140N399X-660843-003nge/N399X-660843-003.dlp6140_allegheny N399X-760843-005nge/N399X-760843-005.dlp6180N49XX-777843-001nge/N49XX-777843-001.dlp6540N6091-660843-003nge/N6091-660843-003.dlp6540_allegheny N6091-760843-004nge/N6091-760843-004.dlp6580N7091-777843-001nge/N7091-777843-001.dlp6780N7091-777843-001nge/N7091-777843-001.dlpFLX240N288X-660855-003nge/N288X-660855-003.dlpFLX280N588X-660855-003nge/N588X-660855-003.dlpFLX380N6091-660855-003nge/N6091-660855-003.dlpFLX380_allegheny N6091-760855-002nge/N6091-760855-002.dlpIOM Version Firmware FileCSM100FC9682nge/esm9682.s3rCSM100iSATA9728nge/esm9728.dlCSM20098D0nge/esm98D0.esmCSM20098D4nge/esm98D4.esmCSM20098E4nge/esm98E4.esmFLA3009682nge/esm9682.s3rFLA2009330nge/esm9330.s3rFLC200iSATA9728nge/esm9728.dlFLC200dSATA9566nge/esm9566.dlDisk Drive Version Firmware FileH106060SDSUN300G0804(LP2238-A2B0)disk/D_H106060SDSUN300G_0804.dlp H106060SDSUN600G0804(LP2238-A2B0)disk/D_H106060SDSUN600G_0804.dlp H7220AA30SUN2.0T0711(LP1160-A28A)disk/D_H7220AA30SUN2.0T_0711.dlp HDS7225SCSUN250G0705(LP1160-A7BA)disk/D_HDS7225SCSUN250G_0705.dlp HDS7240SBSUN400G AC7A disk/D_HDS7240SBSUN400G_AC7A.dlp HDS7250SASUN500G0705(LP1160-AV0A)disk/D_HDS7250SASUN500G_0705.dlp HUA7210SASUN1.0T0710(LP1160-AC5A)disk/D_HUA7210SASUN1.0T_0710.dlp HUA7250SBSUN500G0710(LP1160-AC5A)disk/D_HUA7250SBSUN500G_0710.dlp HUA7275SASUN750G0710(LP1160-AC5A)disk/D_HUA7275SASUN750G_0710.dlp HUS1014FASUN146G2A08disk/D_HUS1014FASUN146G_2A08.dlp HUS1030FASUN300G2A08disk/D_HUS1030FASUN300G_2A08.dlp HUS1073FASUN72G2A08disk/D_HUS1073FASUN72G_2A08.dlpHUS1530FCSUN300G E5B0disk/D_HUS1530FCSUN300G_E5B0.dlp HUS1561FCSUN600G E5B0disk/D_HUS1561FCSUN600G_E5B0.dlp MAT3073F SUN72G1403disk/D_MAT3073FSUN72G_1403.dlp MAT3147F SUN146G1403disk/D_MAT3147FSUN146G_1403.dlp MAT3300F SUN300G1403disk/D_MAT3300FSUN300G_1403.dlp MAW3073FCSUN72G1303disk/D_MAW3073FCSUN72G_1303.dlp MAW3147FCSUN146G1303disk/D_MAW3147FCSUN146G_1303.dlp MAW3300FCSUN300G1303disk/D_MAW3300FCSUN300G_1303.dlp MAX3073FDSUN72G0403disk/D_MAX3073FDSUN72G_0403.dlp MAX3147FDSUN146G0403disk/D_MAX3147FDSUN146G_0403.dlp ST31000NSSUN1.0T0708disk/D_ST31000NSSUN1.0T_0708.dlp ST31001NSSUN1.0T0704disk/D_ST31001NSSUN1.0T_0704.dlp ST314655FSUN146G3292disk/D_ST314655FSUN146G_3292.dlp ST314655FSUN146G3192disk/D_ST314655FSUN146G_3192.dlp ST314656FSUN146G091C disk/D_ST314656FSUN146G_091C.dlp ST314656FSUN146G0A1C disk/D_ST314656FSUN146G_0A1C.dlp ST314670FSUN146G055A disk/D_ST314670FSUN146G_055A.dlp ST314680FSUN146G0407disk/D_ST314680FSUN146G_0407.dlp ST314685FSUN146G042D disk/D_ST314685FSUN146G_042D.dlp ST314695FSUN146G0409disk/D_ST314695FSUN146G_0409.dlp ST32000NSSUN2.0T0704disk/D_ST32000NSSUN2.0T_0704.dlp ST32500NSSUN250G0706(LP1160-3AZY)disk/D_ST32500NSSUN250G_0706.dlp ST330000FSUN300G055A disk/D_ST330000FSUN300G_055A.dlp ST330055FSUN300G3292disk/D_ST330055FSUN300G_3292.dlp ST330055FSUN300G3192disk/D_ST330055FSUN300G_3192.dlp ST330056FSUN300G091C disk/D_ST330056FSUN300G_091C.dlp ST330056FSUN300G0A1C disk/D_ST330056FSUN300G_0A1C.dlp ST330057FSUN300G0705disk/D_ST330057FSUN300G_0705.dlp ST340008FSUN0.4T0443disk/D_ST340008FSUN0.4T_0443.dlp ST345056FSUN450G091C disk/D_ST345056FSUN450G_091C.dlp ST345056FSUN450G0A1C disk/D_ST345056FSUN450G_0A1C.dlp ST35000NSSUN500G0706(LP1160-3AZY)disk/D_ST35000NSSUN500G_0706.dlpST360057FSUN600G0605disk/D_ST360057FSUN600G_0605.dlpST360957FSUN600G9305disk/D_ST360957FSUN600G_9305.dlpST373207FSUN72G055A disk/D_ST373207FSUN72G_055A.dlpST373307FSUN72G0407disk/D_ST373307FSUN72G_0407.dlpST373453FSUN72G0449disk/D_ST373453FSUN72G_0449.dlpST373454FSUN72G042D disk/D_ST373454FSUN72G_042D.dlpST373455FSUN72G3292disk/D_ST373455FSUN72G_3292.dlpST373455FSUN72G3192disk/D_ST373455FSUN72G_3192.dlpST373554FSUN72G0409disk/D_ST373554FSUN72G_0409.dlpST37500NSSUN750G0706(LP1160-3AZY)disk/D_ST37500NSSUN750G_0706.dlpZ16IFE3B-73UC MS04disk/D_Z16IFE3B_73UC_3804204_800_012.dlpSun Storage J4000Series Arrays,Sun Storage F5100Flash Array,and Sun Blade6000Disk ModuleSIM Board Version Firmware FileStorage J42003A53qnt/J4200.3A53.fwStorage J44003R53qnt/J4400.3R53.fwStorage J44103524qnt/J4410.3524.fwExpander Board Version Firmware FileJ4500 5.3.73.0(0349)sun/sasxfwlo.5.03.73.fwF5100B 5.4.5.0(0405)sun/sasxfwmo.5.04.05.fwF5100 5.3.73.0(0349)sun/sasxfwmo.5.03.73.fwB6000Blade Storage 5.4.03.0(0403)sun/sasxfwnv.5.04.03.fwB6000NEM Plus 5.4.03.0(0403)sun/sasxfwnv.5.04.03.fwB6000NEM GOA 5.4.03.0(0403)sun/sasxfwnv.5.04.03.fwB6000NEM Hydra 5.4.03.0(0403)sun/sasxfwhv.5.04.03.fwFMOD Version Firmware FileSD88SA024SA0-SATA D129sun/D129.binSSD Version Firmware FileSSDSA2SH032G1SB8626sun/rel8626SunPhyParams.binDisk Drive Version Firmware FileH101414SCSUN146G SA25disk/H101414SC.SA25.fwH101473SCSUN72G SA25disk/H101473SC.SA25.fw H103030SCSUN300G A2A8disk/H103030SC.A2A8.fw H7220AA30SUN2.0T A28A disk/H7220AA30.A28A.fw HUA7210SASUN1.0T AC5A disk/HUA7210SA.AC5A.fw HUA7250SBSUN500G AC5A disk/HUA7250SB.AC5A.fw HUA7275SASUN750G AC5A disk/HUA7275SA.AC5A.fw HUS1514SBSUN146G SA04disk/HUS1514SB.SA04.fw HUS1530SBSUN300G SA04disk/HUS1530SB.SA04.fw HUS1573SBSUN72G SA04disk/HUS1573SB.SA04.fw MAY2073RCSUN72G0701disk/MAY2073R.0701.fw MBB2073RCSUN72G0705disk/MBB2073R.0705.fw MBB2147RCSUN146G0705disk/MBB2147R.0705.fw ST31000NSSUN1.0T SU15disk/ST31000NS.SU15.fw ST314655SSUN146G0D92disk/ST314655S.0D92.fw ST314656SSUN146G0B1C disk/ST314656S.0B1C.fw ST31001SSSUN1.0T0514disk/ST31001SS.0514.fwST32000SSSUN2.0T0514disk/ST32000SS.0514.fwST32500NSSUN250G3AZY disk/ST32500NS.3AZY.fw ST32502NSSUN250G SU15disk/ST32502NS.SU15.fw ST330055SSUN300G0D92disk/ST330055S.0D92.fw ST330056SSUN300G0B1C disk/ST330056S.0B1C.fw ST330057SSUN300G0705disk/ST330057S.0705.fwST340008SSUN0.4T0643disk/ST340008S.0643.fwST345056SSUN450G0B1C disk/ST345056S.0B1C.fw ST35000NSSUN500G3AZB disk/ST35000NS.3AZB.fw ST35002NSSUN500G SU15disk/ST35002NS.SU15.fw ST360057SSUN600G0705disk/ST360057S.0705.fwST373455SSUN72G0D92disk/ST373455S.0D92.fw ST37500NSSUN750G3AZB disk/ST37500NS.3AZB.fw ST37502NSSUN750G SU15disk/ST37502NS.SU15.fw ST914602SSUN146G0603disk/ST914602S.0603.fwST914603SSUN146G0868disk/ST914603S.0868.fwProduct DocumentationYou can view,print,or purchase a broad selection of documentation,including localized versions,at:/technetwork/indexes/documentation/index.htmlTechnical SupportIf you have technical questions about this product that are not answered in this document,go to:https://ST930003SSUN300G 0868disk/ST930003S.0868.fwST973402SSUN72G 0603disk/ST973402S.0603.fwST973451SSUN72G 0302disk/ST973451S.0302.fwCopyright ©2009,2011,Oracle and/or its affiliates.All rights reserved.Copyright ©2009,2011,Oracle et/ou ses affiliés.Tous droits réservés.Part No.: E25379-01August 2011。
MIC2033 高精度高侧固定电流限制电源分布开关说明书
MIC2033 Evaluation BoardHigh-Accuracy, High-Side, Fixed Current Limit Power SwitchMicrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 •General DescriptionThe MIC2033 is a high-side MOSFET power distribution switch providing increased system reliability using 5% current limit accuracy.The MIC2033 has an operating input voltage range from 2.5V to 5.5V, is internally current limited, and has thermal shutdown to protect the device and system. The MIC2033 is offered with either active-high or active-low logic level enable input controls. It has an open drain fault status output flag with a built-in 32ms delay that asserts low during overcurrent or thermal shutdown conditions.The MIC2033 is available with several different fixed current limit options: 0.5A, 0.8A, 1A, and 1.2A. A capacitor-adjustable soft-start circuit minimizes inrush current in applications using high capacitive loads.The MIC2033 is offered in both 6-pin SOT-23 and 6-pin 2mm x 2mm thin DFN packages. It has an operating junction temperature range of −40°C to +125°C. RequirementsThe MIC2033 evaluation board requires a single power supply to provide V IN . The V IN power supply must be able to deliver a minimum of 2.5V and more than 1.5A capability. The output load can either be active or passive. PrecautionsThe evaluation board does not have reverse polarity protection. Applying a negative voltage to the V IN terminal can damage the device. In addition, the maximum V IN operating voltage of the MIC2033 evaluation board is 5.5V. Exceeding 5.5V on V IN can permanently damage the device.Getting Started1. Connect an external supply to the V IN terminal .Apply the desired input voltage to the V IN and ground terminals of the evaluation board, paying careful attention to polarity and supply voltage. The user can place an ammeter between the input supply and the V IN terminal to the evaluation board. Make sure that the supply voltage is monitored at the V IN terminal. The ammeter and/or power lead resistance can reduce the voltage supplied to the input.2. Connect the load to the V OUT and ground terminals.The load can be either passive (resistive) or active (as in an electronic load). The user can place an ammeter between the load and the V OUT terminal. Make sure that the output voltage is monitored at the V OUT terminal.3. Enable the switchThe MIC2033-12AYxx evaluation boards are configured for default enable using a 10k Ω pull-up resistor from the ENABLE pin to VIN. To disable the switch, place a jumper short across the jumper pins at TP2. The MIC2033-05BYxx evaluation boards are configured for default disable. To enable the switch, place a jumper short across the jumper pins at TP2. 4. Fault detectionThe MIC2033 is equipped with an error flag, FAULT/. TP3 is provided to monitor the FAULT/ pin.Ordering InformationPart Number DescriptionMIC2033-05BYM6 EV Evaluation board featuring the MIC2033-05BYM6 500mA Switch MIC2033-12AYM6 EV Evaluation board featuring the MIC2033-12AYM6 1.2A Switch MIC2033-05BYMT EV Evaluation board featuring the MIC2033-05BYMT 500mA Switch MIC2033-12AYMT EVEvaluation board featuring the MIC2033-12AYMT 1.2A SwitchApplication InformationSoft-StartSoft-start reduces the power supply input surge current at startup by controlling the output voltage rise time. The input surge appears while the output capacitor is charged up. A slower output rise time draws a lower input surge current.During soft-start, an internal current sink discharges the external capacitor at CSLEW to ground to control the ramp of the output voltage. The output voltage rise time depends on the value of C CSLEW, the input voltage, output voltage, and the current limit. Micrel recommends that the value of the CSLEW external capacitor be in the range of 0.1µF to 1µF. For the MIC2033 evaluation board, CSLEW = C3 = 0.1µF. Output VoltageThe MIC2033 evaluation board is available with either a 0.5A or 1.2A fixed current limit. If the output current exceeds the current limit, the MIC2033 switch enters constant current limit mode. The maximum allowable current limit can be less than the full specified and/or expected current if the MIC2033 is not mounted on a circuit board with sufficiently low thermal resistance. The MIC2033 responds to short circuits within 10µs to limit the output current. It also provides an output fault flag that asserts (low) for an overcurrent condition that lasts longer than the overcurrent fault response delay time (t FAULT/), which is typically 32ms.MIC2033-xxxYMx Evaluation Board SchematicsMIC2033-xxxYMT Evaluation BoardMIC2033-xxxYM6 Evaluation BoardBill of MaterialsNumber Manufacturer Description Qty. Item PartC1608X5R0J105K TDK(1)C1, C21.0µF/6.3V ceramic capacitor, X5R, 0603 206036D105KAT2A AVX(2)06033C104KAT2A TDK0.1µF/25V ceramic capacitor, X7R, 0603 1C3C1608X7R1E104K AVXR1, R2 CRCW060310K0FKEA Vishay/Dale(3) 10.0kΩ, film resistor, 0603, 1% 2U1 MIC2033-xxxYMx Micrel(4)High-accuracy, high-side, fixed current limit power switch 1Notes:1. TDK: .2. AVX: .3. Vishay: .4. Micrel, Inc.: .Evaluation Board PCB LayoutMIC2033-xxxYMT Evaluation Board – Top LayerMIC2033-xxxYMT Evaluation Board – Bottom LayerEvaluation Board PCB Layout (Continued)MIC2033-xxxYM6 Evaluation Board – Top LayerMIC2033-xxxYM6 Evaluation Board – Bottom Layer。
AETHER ARIEL AETHER 65 产品手册
OWNER'S MANUALAETHER ™| ARIELAETHER 65AETHER 55ARIEL 55ARIEL 65Welcome to Osprey. We pride ourselves on creating the most functional, durable and innovative carrying products for your adventures. Please refer to this owner’s manual for information on product features, use, maintenance, customer service and warranty.12345678911MAIN bluesign ®-approved 420HDnylon packcloth, PFC-free DWR ACCENT b luesign ®-approved 210Dnylon Diamond, PFC-free DWR BOTTOM b luesign ®-approved 420HDnylon packcloth, PFC-free DWRSHARED 1 Included raincover made with PFC-free DWR and bluesign ®-approved materials 2 Large front panel zip access to main compartment 3 Floating top lid with lash points 4 Fabric reinforced front shove-it pocket5 Large dual-access stretch mesh side water bottle pockets6 Dual upper/lower side compression straps7 Dual front panel compression straps with StraightJacket compression 8 Dual zippered hipbelt pockets 9Dual ice axe loops with bungee tie-offs10 Zippered sleeping bag compartment with removable divider 11 Removable sleeping pad straps +Internal hydration reservoir sleeveAETHER 65MEN'SSPECS S/M L/XL Inches3967 4150 CubicLiters 65 68 Pounds 4.92 4.962.23 2.19 KilogramsInches 32 h x 16 w x 11 d 31 h x 15 w x 10 d Centimeters 80 h x 40 w x 28 d 78 h x 38 w x 25 d LOAD RANGE30-60 lb | 14-27 kgAETHER 55MEN'SSPECS S/M L/XL Inches3356 3539 CubicLiters 55 58 Pounds 4.83 4.872.19 2.21 KilogramsInches 31 h x 15 w x 10 d 33 h x 15 w x 10 d Centimeters 78 h x 38 w x 25 d 83 h x 38 w x 25 dLOAD RANGE30-60 lb | 14-27 kgARIEL 65WOMEN'SSPECS XS/S M/L Inches3783 3967 CubicLiters 62 65 Pounds 4.85 4.892.20 2.22 KilogramsInches 30 h x 16 w x 11 d 31.5 h x 16 w x 11 d Centimeters 75 h x 40 w x 28 d 80 h x 40 w x 28 d LOAD RANGE30-60 lb | 14-27 kgARIEL 55WOMEN'SSPECS XS/S M/L Inches3173 3356 CubicLiters 52 55 Pounds 4.77 4.82 Kilograms 2.17 2.19Inches 29 h x 15 w x 10 d 31 h x 15 w x 10 d Centimeters 73 h x 38 w x 25 d 78 h x 38 w x 25 d LOAD RANGE35-60 lb | 15-27 kgCARRYLIGHTWIRE SUSPENSION +3.5 LightWire peripheral frame effectively transfers load to hipbelt.AIRSCAPE BACKPANEL +Injection-molded, die-cut foam AirScape framesheet maintainscomfortable back contact with ventilated airflow channels and maximum stability for carrying heavy loads .+Mesh-covered foam lumbar for supportive, lightweight and comfortable contact surfaces.HARNESS + Easily adjustable harness system for various torso lengths +Custom Fit-on-the-Fly Shoulder Straps includedLOAD LIFTERSSTERNUM STRAPLIGHTWIRE FRAMEERGOPULL HIPBELTLADDER LOCK HARNESS TORSOADJUSTMENTSAIRSCAPE INJECTION- MOLDED FRAMESHEETFIT-ON-THE-FLY ® SHOULDER STRAPCUSTOM FIT-ON-THE-FLY ® HIPBELTTORSO LENGTH GUIDELINESCUSTOM FIT-ON-THE-FLY SHOULDER STRAP + Custom Fit-on-the-Fly Shoulder Straps allow for a precise shoulder wrap and fit.+Spacer mesh fabric provides a soft and comfortable contact surface.CUSTOM FIT-ON-THE-FLY HIPBELT + Extendable Custom Fit-on-the-Fly Hipbelt offers a precise fit for varying waist sizes.+ Incremental length and angle adjustments allow for a fine-tuned fit +Crossbody ErgoPull hipbelt pulls weight into lumbar when hipbelt is tightened.ENHANCED LOAD TRANSFER +The Custom Fit-on-the-Fly Hipbelt integrates the LightWire frame into the adjustment system—creating a better distribution of weight and, in turn, a better carry.HOW TO MEASURE YOUR BACK FOR YOUR PACKPACK FIT INSTRUCTIONS4 TIGHTEN SHOULDER STRAPTighten the shoulder harness straps by pulling them down and back.5 TIGHTEN LOAD LIFTERSTightening the load lifters will pull the pack close to the body and help stabilize the load.I f the torso length on the pack is adjusted correctly, the load lifters will sit between a 30 to 60-degree angle and align naturally with the shoulder straps.1 POSITION THE PACKC ompletely loosen the pack’s hipbelt, harness and load-lifter straps. Load the pack with 10-20 lbs./ 4-9 kg. of gear. Put the pack on and make sure the hipbelt is centered and rests over the hipbone. The hipbelt padding should sit halfway above/below the hipbone.2 BUCKLE HIPBELTBuckle and tighten the hipbelt evenly using Osprey’s cross-body ErgoPull.The padding of the hipbelt should wrap around the hips with approximately 1-3 in./2.5-6 cm. of webbing between the buckle and the hipbelt when tightened.3 HIPBELT ADJUSTMENTI f the hipbelt is too large and “tops out” or does not offer the preferred amount of coverage, the customer may need a differentpack size, model or adjustment (Fit-On-The-Fly hipbelt imaged).45PACK FIT INSTRUCTIONS (CONTINUED)6 CHECK TORSO LENGTHLocate the harness yoke – this is where the harness straps come together near the base of the user’s neck. Locate the C7 vertebra – the large protruding bone at the base of the neck. The yoke should be 1 in./2.5 cm. - 2 in./5 cm. below the C7 vertebra.8 CHECK HARNESS FITThe harness straps should wrap fully around the shoulders with no gaps between the pack and back.The padded part of the shoulder straps should end at 2 in./5 cm. or more below the armpits without topping out.7 TORSO LENGTH - HARNESS ADJUSTMENTI f the torso length is too long or short, the customer may need a different pack size, model or an adjustment.Consider making an adjustment if: • L oad lifters are angled below/above 30-60 degrees• Y oke to C7 vertebra distance is more than 2 in./5 cm. or less than 1 in./2.5 cm. •T here is a gap between the harness and back of the shoulder9 HARNESS/SHOULDER STRAP ADJUSTMENTI f the harness is too small or large, but the torso length of the pack is correct, the customer may need a different pack size, model or adjustment (Fit-On-The-Fly shoulder strap imaged).10 BUCKLE THE STERNUM STRAPThe sternum strap adjusted to approximately 2 in./5 cm. below the collarbone.TORSO LENGTH - ADJUSTING THE HARNESSCUSTOM FIT-ON-THE-FLY HIPBELTC ompletely loosen the pack's load lifters and harness straps.T o lengthen the torso length:1W hile releasing the ladder locks, located on either side of the backpanel directly above the lumbar, slide the harness up along the LightWire frame to the appropriate torso length.2 I t is easiest to do this one side at a time, sliding the harness with one ladder lock and then the other. 3U se the white markings on the edge of the backpanel as a guideline to align each side of the harness.When the pack is not in use, the harness will easily slide up and down the LightWire frame. However, when the pack is on-body, the ladder locks will engage the harness’ webbing and the harness will adjust to the desired height.To shorten the torso length:1 S lide the harness down along the LightWire frame to the appropriate torso length.2 U se the white markings on the edge of the backpanel as a guideline to align each side of the harness. 3T ighten the webbing at the ladder locks, located on either side of the backpanel directly above thelumbar, to tension.The customizable hipbelt pad extends up to 6 in./15 cm. directly from the lumbar to accommodate different hip shapes and sizes and provide a fine-tuned fit. To adjust the hipbelt:C ompletely loosen the pack’s hipbelt webbing.1 S eparate one of the pack’s hipbelt wings from the padded hipbelt by disengaging the hook-and-loop closure.2 W ith one hand, hold the pack’s hipbelt wing. With the other hand, guide the padded hipbelt in/out from behind the padded lumbar to the desired position.3P ress firmly to re-engage the hook-and-loop closure. While slight angle/height adjustments can be made when engaging the hipbelt wing, the white markings on the padded hipbelt should be used as the guideline.N OTE: The rough “hook” of the pack’s hipbelt wing should always be engaged to the soft “loop” of the paddedhipbelt. If disengaged, it may rub and cause abrasion to clothing.4 R epeat these steps on the other side. Extend the pads the same distance on both hipbelt wings so packweight is distributed evenly.FIT-ON-THE-FLY SHOULDER STR APA customizable strap extension allows for the perfect shoulder wrap.To adjust the shoulder strap:C ompletely loosen the pack harness’ load lifter and shoulder strap webbing.1 S tart with one shoulder strap and separate the shoulder strap sleeve from the padded shoulderstrap by disengaging the hook and loop closure.2 S lide the padded strap in/out of the shoulder strap sleeve to desired length.3 U se the white markings as a guideline and press firmly to re-engage the hook-and-loop closure.N OTE: The rough “hook” of the pack’s shoulder strap sleeve should always be engaged to the soft “loop”of the padded shoulder strap. If disengaged, it may rub and cause abrasion to clothing.4 R epeat these steps on the other side. Extend the pads the same distance on both shoulder straps so packweight is distributed evenly.NOTE: The webbing keeper, located by the ladder lock at the end of the padded hipbelt wings and shoulder strap, aligns the webbing before it goes into the ladder lock. The webbing coming out of the ladder lock should not be threaded through these keepers as it will create an incorrect angle, inhibiting the straps from tightening when pulled while putting on and fitting the pack.CORRECT:INCORRECT:RAINCOVER 1 Locate raincover icon on the toplid. 2 R emove raincover from compartment and slip it over the top and bottom of the pack. 3 T ighten the cord lock at the bottom of raincover to tension raincover into place.4 T o detach raincover, unfasten toggle from cord loop.T ip: To prevent mildew, allow raincover to dry entirely before storing.DUAL ICE TOOL ATTACHMENTThe ice tool loops and bungee tieoffs provide secure tool attachment.A S lide the tool shaft through the top of the ice tool loop and flip the shaft up towardthe top of the pack.B L oosen the bungee cord lock and route the tool handle through the bungee.Tighten the cord lock nesting it into the Y-clip to secure the tool into place.CReverse to remove.SLEEPING PAD STRAPSRemovable sleeping pad straps for external attachment.A Unclip the two sleeping pad strap bucklesB R emove the webbing from the triglide at the base of the packC Reverse to reattachINTERNAL RESERVOIR SLEEVEPlace reservoir inside sleeve to help ensure proper pack weight distribution.Clip reservoir to buckled loop to keep upright.SLEEPING BAG COMPARTMENTLower zippered compartment for dedicated sleeping bag storage. Detach the divider for unimpeded access to pack interior. Unthread the divider webbing from the triglidebuckle, and reverse to reattach.DUAL UPPER AND LOWER SIDE COMPRESSION STRAPSUpper and lower compression straps provide added stability when the pack is not full oroffer additional attachment points for carrying gear on the outside of the pack.DUAL STRAIGHTJACKET COMPRESSION STRAPSDual front panel compression straps help stabilize loads. When minimal pack volume isneeded, the compression straps can be attached to the additional StraightJacket.DUAL MESH SIDE POCKETSZIPPERED HIPBELT POCKETSFABRIC REINFORCED FRONT SHOVE-IT POCKETLARGE FRONT PANEL ZIP ACCESSTO MAIN COMPARTMENTFLOATING TOP LID WITH LASH POINTSFor more information on this product and others, pack care, how to pack your pack, our lifetime guarantee, or to contact Osprey Customer Service, visit .。
合金装备 和平行者 美版 金手指
_G 潛龍碟影和平行者_S ULUS-10509_C0 遊戲總時間00:00:00_N0 代码片段_L 0x2050242C 0x00000000_C0 過關時間00:00:00_N0 代码片段_L 0xC0019158 0xAE000034_C0 時間停止(※因爲時間停止，開發和派遣等也不進行。
) _N0 代码片段_L 0xC0019154 0x00000000_C0 生命値不減_N0 代码片段_L 0xC0195DDC 0x00000000_C0 無限彈藥1_N0 代码片段_L 0xC00532D4 0x24020000_C0 無限彈藥2_N0 代码片段_L 0xC0101EDC 0x24140000_C0 無限道具1_N0 代码片段_L 0xC00FE44C 0x02401023_C0 無限道具2_N0 代码片段_L 0xC00FE308 0x24130000_C0 迷彩率100%_N0 代码片段_L 0xC017E924 0x240203E8_C0 不受傷_N0 代码片段_L 0xC01148B0 0x24050000_C0 自動QTE (原日版碼作者xb26※要在劇情開始以前使用。
) _N0 代码片段_L 0xC0073A8C 0x0E200408_L 0xC0073A90 0xAE629F30_L 0x20001020 0x8C620004_L 0x20001024 0x1040000A_L 0x20001028 0x240101E8_L 0x2000102C 0x844402B0_L 0x20001030 0x14240007_L 0x20001034 0x24011000_L 0x20001038 0xA44102BE_L 0x2000103C 0x3C010001_L 0x20001040 0x00220821 _L 0x20001044 0xAC200EE0 _L 0x20001048 0xAC206248 _L 0x2000104C 0xAC206F80 _L 0x20001050 0x03E00008 _C0 高速移動_N0 代码片段_L 0x2044E398 0x00000410 _C0 移動速度1.25倍_N0 代码片段_L 0xC017C2A8 0x00C08021 _L 0xC017C2B0 0x4614003C _L 0xC017C2B4 0x3C033FA0 _L 0xC017C2B8 0x44836000 _L 0xC017C314 0x46146302 _C0 Channeler效果常開_N0 代码片段_L 0xC0242838 0x24020001 _C0 Engineering效果常開_N0 代码片段_L 0xC01314AC 0x24020001 _C0 SWAT效果常開_N0 代码片段_L 0xC0155090 0x24020001_L 0xC01741F0 0x10000077_L 0xC0182DDC 0x24020001_L 0xC018A5D8 0x00000000_L 0xC018A708 0x24020001_L 0xC0235418 0x24020001_C0 Pro Wrestling Maniac效果常開_N0 代码片段_L 0xC0154D54 0x24020001_L 0xC0174210 0x24020001_L 0xC0174224 0x24020001_L 0xC018A618 0x24020001_L 0xC018A744 0x24020001_L 0xC0196E0C 0x24020001_C0 無限徵兵_N0 代码片段_L 0xD07EF349 0x0000C30C_L 0x207EF350 0x00000000_C0 徵兵數必6人(※要和無限徵兵併用) _N0 代码片段_L 0xD07EF349 0x0000C30C_L 0x207EF280 0x24170006 _C0 新兵必女性_N0 代码片段_L 0xC00421E4 0x2408FFFE _L 0xC00421FC 0x02682824 _C0 新兵必男性_N0 代码片段_L 0xC00421FC 0x36650001 _C0 Railgun最大_N0 代码片段_L 0xC0061560 0x10000006 _L 0xC0061564 0x24040C00 _C0 Stunrod最大_N0 代码片段_L 0x104F77B0 0x00002710 _C0 Soliton雷達表示_N0 代码片段_L 0xC0246504 0x1000028A _C0 英雄度最大_N0 代码片段_L 0x604F5068 0x000F423F _L 0x00020001 0x00000B30_C0 實戰部隊能力最大(包括GMT+) _N0 代码片段_L 0xC0030384 0x0A200800_L 0xC0030388 0x3C010001_L 0x20002000 0x3421869F_L 0x20002004 0xAC810038_L 0x20002008 0x2401270F_L 0x2000200C 0xA4810044_L 0x20002010 0xA481004C_L 0x20002014 0x3C0104E2_L 0x20002018 0x342104E2_L 0x2000201C 0xA4810052_L 0x40002020 0x00030001_L 0xAC810054 0x00000004_L 0x2000202C 0xA4810060_L 0x20002030 0x240103E7_L 0x40002034 0x00040001_L 0xA4810064 0x00000004_L 0x20002044 0xA4810082_L 0x20002048 0xA4800076_L 0x2000204C 0xA480007A_L 0x20002050 0xA480007C_L 0x20002054 0xA4800080_L 0x20002058 0x0A2120B6_L 0x2000205C 0x8C840038_C0 開發界面按住△再確定立即开发_N0 代码片段_L 0xE0073EE6 0x0080B24C_L 0x20804ECC 0x24050002_L 0x2080B258 0x8C620004_L 0x2080B25C 0x50520127_L 0xD0000003 0x10001000_L 0x20804ECC 0x24050003_L 0x2080B258 0x24110003_L 0x2080B25C 0x50000127_C0 全開發完成(※武器、道具、設計圖等全開啓) _N0 代码片段_L 0xC00487D4 0x0A200400_L 0xC0049B98 0x0A200400_L 0x20001000 0x10800002_L 0x20001004 0x24010003_L 0x20001008 0xAC810004_L 0x2000100C 0x03E00008_L 0x20001010 0x8C820004_C0 全武器_N0 代码片段_L 0xC00487D4 0x24020003 _L 0xC00487D8 0xAC820004 _C0 全武器等級3_N0 代码片段_L 0xC0049758 0x24030003 _L 0xC004975C 0xA0830016 _C0 全道具_N0 代码片段_L 0xC0049B98 0x24020003 _L 0xC0049B9C 0xAC820004 _C0 全AI晶片_N0 代码片段_L 0xC010F398 0x00002812 _L 0xC010F39C 0xA0A20000 _C0 全勳章_N0 代码片段_L 0xC0313C1C 0xA065ADA1 _C0 全稱號_N0 代码片段_L 0xC0313A48 0x24020017_L 0xC0313A4C 0xA062AD98 _C0 按□刪除所選的道具_N0 代码片段_L 0x200487D4 0x10800002 _L 0x20049B98 0x10800002 _L 0xD0000002 0x10008000 _L 0x200487D4 0xAC800004 _L 0x20049B98 0xAC800004 _C0 全ZEKE零件_N0 代码片段_L 0x603E77D4 0x0000000D _L 0x00020001 0x000125C0 _L 0x603E77D4 0x00010000 _L 0x0002000D 0x00012758 _L 0x90000003 0x00000000 _L 0x603E77D4 0x00640101 _L 0x00020005 0x0001275C _L 0x90000003 0x00000100 _L 0x603E77D4 0x00640102 _L 0x00020002 0x00012798 _L 0x90000003 0x00000100 _L 0x603E77D4 0x00640103_L 0x00020003 0x000127B0 _L 0x90000003 0x00000001 _L 0x603E77D4 0x00640205 _L 0x00020003 0x000127D4 _L 0x90000003 0x00000100。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
AETOS艾拓思每日焦点：三大因素致黄金暴跌，隔夜下挫0.5%
2014-05-29
欧洲时段，ICE美元指数在近期高点盘整，贵金属在周二低点窄幅整理，白银价格仍企稳长期顶部上方。
周二公布的美国耐用品订单报告参差不齐，虽然4月耐用品订单月率上升0.8%，高于市场普遍预期，但主要受到国防需求推动，私人部门耐用品订单需求大幅下滑。
衡量未来商业投资的关键指标—非国防资本品新订单(除飞机)下降1.2%，3月份该指标一度大幅上涨4.7%，核心资本品订单意外走弱暗示了投资前景可能面临显著的下行风险。
随后公布的制造业PMI和消费者信心数据均表现不俗，5月Markit综合PMI初值从55.6升至58.6，5月消费者信心指数也从82.3进一步改善至83.0。
从已经公布的4月同步指标来看，美国经济在二季度初依旧放缓。
DXY(H4-CHART)
三大因素致金价暴跌，金价再挫0.5%
当前阶段市场焦点均集中在下周欧央行利率决议上，宽松预期正持续发酵并对欧元构成严峻的下行压力，在宽松预期得以兑现或缓和之前欧元可能持续承压，美元则有望维持强势。
经历周二的暴跌2%之后金价似乎已经打开短期下行空间，昨日黄金价格再次下挫0.5%，在之前一个交易日跌至2月以来的最低水平，但是市场参与者依然犹豫不肯入市采购，金价连续第三个交易日下挫，主力黄金合约报价场内交易中再度收跌在每盎司1259.30美元，导致金价暴跌的原因主要有三大因素：
第一：美数据的靓丽表现，打压黄金风险偏好
第二：美国股市持续大涨将市场投资资金带离了低收益的黄金市场
第三：前日北京时间20点左右，市场出现4.5亿美元的炮弹，打压黄金快速走低，令金价连续下挫没能像以往反弹起死回生。
技术上目标位将指向前期底部1180-1200区间，银价再度走弱测试18.50-19，关注该位置能否提供有效阻力，下破将确认中期趋势依旧向下，持续企稳则形成新的底部。
XAUUSD（D1-CHART)
以上内容属于一般性信息，并未有将您的投资目标、财务状况和投资需求考虑在内。
在您作出投资决定前，请务必仔细阅读并完全理解我们的产品披露声明(Product Disclosure Statement - PDS) 和金融服务指南(Financial Services Guide – FSG)。
您可以在AETOS艾拓思官方网站上获得这些文件。
艾拓思资本
合所有投资者。
在选择交易差价合约和保证金产品前，我们建议您咨询独立投资顾问的意见。