三星 SLA-7000 数字显示仪说明书
合集下载
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
The time and date are kept internally with a battery backed up clock allowing time dependent procedures to be performed.
1.2 MODEL 706 FEATURES
The Model 766 scanner includes the following features:
SPECIFICATIONS
GENERAL
DISPLAY: Seven 0.5” LED digits with decimal point, function and IEEE status annunciators.
INTERNAL CLOCK: Displays hours/minutes/seconds or date/ month; less than 1 minute/month error (typical).
DCI, DTI, CO, El. Programmable Parameters: Display Mode, Output Format, EOI,
SRQ, Fir&Last, Open, Close, Display Channel, Alternate Output, Pole Mode, Date Format, Save/Recall, Reset, I/O Port, Time, Date, Settle Time, Interval Time, Alarm Time, Program Mode, Trigger Mode, Terminator, Self Test. Digital I/O Port: A separate edge connector consisting of eight input and eight output lines as well as common and + R/DC. Outputs will drive one lTL load. Inputs represent one lTL load. Mating connector supplied.
Stores present relay setup in buffers l-75. Recalls relay setup in buffers l-75. 1, 2, or Qpole configuration for scanning (I-pole requires 7056). O-pole for matrix card. Set time for Alarm output pulse; repeats daily. Check RAM, ROM, LEDs. Single 706 configuration. Daisy Chain configuration. Daisy Chain configuration. Display closed relays only. Clear buffer location. Reset battery backup parameters to factory values.
FRONT PANEL PROGRAMS
0 - Digital I/O I* - Date Format
2* - Settle Time
3* - IEEE Address
4* - Save Setup 5* - Recall Setup 6* - Poles
7 - Alarm Time
8 - Self Test go* - Stand ห้องสมุดไป่ตู้lone 91, - Master 92* - Slave 93 - Inspect 94 - Clear 99 - Reset
The front panel controls are clearly marked and easy to use. These controls serve several functions such as opening a selected channel, closing the channel, scanning between a selectable first and last channel, selecting scan rate and mode. There are 15 internal programs that are accessible from the front panel. The programs can select primary address, settling time, store a relay set up, recall the stored relay set up, control the digital I/O port, switch from International to American date format, start or stop a scan sequence, select 1, 2 or 4-pole measurement modes and program the Model 706 as a master, slave or stand alone instrument in a daisy chain configuration. The Model 706 may also be operated in a matrix configuration.
STORAGE ENVIRONMENT: -25OC to 65OC. CONNECTORS; Four BNC (lTL compatible): External Trigger,
Alarm Out/Serial-In, Channel Ready, Serial Out. CAPACITY: Ten plug-in cards per mainframe. EXPANSION CAPACITY: Daisy chain allows up to 4 SLAVE units
Speclfi+lons subject to change without notice.
SECTION 1 GENERAL INFORMATION
1.1 INTRODUCTION
The Model 706 is an IEEE488 bus compatible scanner that can accommodate ten plug-in scanner cards. With ten scanner cards installed up to 100 2-pole channels can be on the same IEEE address. Using four additional Model 706s in a daisy chain configuration up to 500 2-pole channels can be on the same IEEE address. The Model 706 scanner adheres to standard IEEE488 interface bus protocol. This enables the Model 706 to be incorporated into any measurement that uses programmed control through the IEEE-488 bus.
with I MASTER unit. SWITCHING RATE: 100 channels/second (IOmsl, programmable
to 1 channel/l6 minutes (999.999s). RELAY DRIVE: 4A minimum. POWER: 90-125V or 195250V (internally selected), 50Hz to 400H2,
.lJp to 100 2-pole channels. aIEEE-488 bus operation. *Selectable scan rate of IOmsec to 999.999sec. aSelectable scan modes that enable the user to scan the first channel to the last channel once, continuously or manually. *Fifteen internal programs that are accessible from the front panel. aModel 706 mainframe can accomodate 10 scanner plug-in cards. *Several different plug-in scanner cards are available as options. They include: a general purpose relay card, a thermocouple card, low voltage card, low current card, high current card, high voltage card, matrix card and universal interface card.
*Battery backed up.
Read or change state on digital I/O port. Changes date display between MM.DD and DD.MM. Time to output CHANNEL READY pulse after closing relay. Set bus address; not programmable from bus.
IEEE-488 BUS IMPLEMENTATION:
Multiline Commands: DCL, LLO, SDC, GET, GTL, UNT, UNL, SPE, SPD.
Uniline Commands: IFC, REN, EOI, SRQ, ATN. Interface Functions: SHI, AHI, T6, TM, L4, LEO, SRI, RLI, PPO,
75V.A maximum. DIMENSIONS, WEIGHT: 178mm high x 438mm wide x 448mm
deep (7” x 17 l/4” x 17 3/8”). Net weight 8.6kg (19 Ibs). ACCESSORIES AVAILABLE:
Model 7008-3: IEEE-488 Cable, 0.9m (3 ft.) Model 70086: IEEE-488 Cable, 1.8m (6 ft.) Model 7010: IEEE-488 Adapter for Model 85 Computer. Model 7024-I: Triaxial Cable, 0.3m (I ft.) Model 7024-3: Triaxial Cable, 0.9m (3 ft.) Model 7024IO:Triaxial Cable, 3.0m (IO ft.1 Model 7051-2: BNC to BNC Cable, 0.6m (2 ft.) Model 7051-5: BNC to BNC Cable, 1.5m (5 ft.) Model 7052: 4 x 5 Matrix Card Model 7053: High Current Scanner Card Model 7054: High Voltage Scanner Card Model 7056: General Purpose Scanner Card Model 7057A: Thermocouple Scanner Card Model 7058: Low Current Scanner Card Model 7059: Low Voltage Scanner Card Model 7061: Universal Interface Card Model 7068: Fixed Rack Mounting Kit for 706 Model 7069: Slide Rack Mounting Kit for 706
BATTERY BACKUP: Rechargeable 3.6V nickel-cadmium. I month retention of data with unit turned off.
OPERATING ENVIRONMENT: O” to 50°C, 0% to 80% relative humidity up to 35OC.
1.2 MODEL 706 FEATURES
The Model 766 scanner includes the following features:
SPECIFICATIONS
GENERAL
DISPLAY: Seven 0.5” LED digits with decimal point, function and IEEE status annunciators.
INTERNAL CLOCK: Displays hours/minutes/seconds or date/ month; less than 1 minute/month error (typical).
DCI, DTI, CO, El. Programmable Parameters: Display Mode, Output Format, EOI,
SRQ, Fir&Last, Open, Close, Display Channel, Alternate Output, Pole Mode, Date Format, Save/Recall, Reset, I/O Port, Time, Date, Settle Time, Interval Time, Alarm Time, Program Mode, Trigger Mode, Terminator, Self Test. Digital I/O Port: A separate edge connector consisting of eight input and eight output lines as well as common and + R/DC. Outputs will drive one lTL load. Inputs represent one lTL load. Mating connector supplied.
Stores present relay setup in buffers l-75. Recalls relay setup in buffers l-75. 1, 2, or Qpole configuration for scanning (I-pole requires 7056). O-pole for matrix card. Set time for Alarm output pulse; repeats daily. Check RAM, ROM, LEDs. Single 706 configuration. Daisy Chain configuration. Daisy Chain configuration. Display closed relays only. Clear buffer location. Reset battery backup parameters to factory values.
FRONT PANEL PROGRAMS
0 - Digital I/O I* - Date Format
2* - Settle Time
3* - IEEE Address
4* - Save Setup 5* - Recall Setup 6* - Poles
7 - Alarm Time
8 - Self Test go* - Stand ห้องสมุดไป่ตู้lone 91, - Master 92* - Slave 93 - Inspect 94 - Clear 99 - Reset
The front panel controls are clearly marked and easy to use. These controls serve several functions such as opening a selected channel, closing the channel, scanning between a selectable first and last channel, selecting scan rate and mode. There are 15 internal programs that are accessible from the front panel. The programs can select primary address, settling time, store a relay set up, recall the stored relay set up, control the digital I/O port, switch from International to American date format, start or stop a scan sequence, select 1, 2 or 4-pole measurement modes and program the Model 706 as a master, slave or stand alone instrument in a daisy chain configuration. The Model 706 may also be operated in a matrix configuration.
STORAGE ENVIRONMENT: -25OC to 65OC. CONNECTORS; Four BNC (lTL compatible): External Trigger,
Alarm Out/Serial-In, Channel Ready, Serial Out. CAPACITY: Ten plug-in cards per mainframe. EXPANSION CAPACITY: Daisy chain allows up to 4 SLAVE units
Speclfi+lons subject to change without notice.
SECTION 1 GENERAL INFORMATION
1.1 INTRODUCTION
The Model 706 is an IEEE488 bus compatible scanner that can accommodate ten plug-in scanner cards. With ten scanner cards installed up to 100 2-pole channels can be on the same IEEE address. Using four additional Model 706s in a daisy chain configuration up to 500 2-pole channels can be on the same IEEE address. The Model 706 scanner adheres to standard IEEE488 interface bus protocol. This enables the Model 706 to be incorporated into any measurement that uses programmed control through the IEEE-488 bus.
with I MASTER unit. SWITCHING RATE: 100 channels/second (IOmsl, programmable
to 1 channel/l6 minutes (999.999s). RELAY DRIVE: 4A minimum. POWER: 90-125V or 195250V (internally selected), 50Hz to 400H2,
.lJp to 100 2-pole channels. aIEEE-488 bus operation. *Selectable scan rate of IOmsec to 999.999sec. aSelectable scan modes that enable the user to scan the first channel to the last channel once, continuously or manually. *Fifteen internal programs that are accessible from the front panel. aModel 706 mainframe can accomodate 10 scanner plug-in cards. *Several different plug-in scanner cards are available as options. They include: a general purpose relay card, a thermocouple card, low voltage card, low current card, high current card, high voltage card, matrix card and universal interface card.
*Battery backed up.
Read or change state on digital I/O port. Changes date display between MM.DD and DD.MM. Time to output CHANNEL READY pulse after closing relay. Set bus address; not programmable from bus.
IEEE-488 BUS IMPLEMENTATION:
Multiline Commands: DCL, LLO, SDC, GET, GTL, UNT, UNL, SPE, SPD.
Uniline Commands: IFC, REN, EOI, SRQ, ATN. Interface Functions: SHI, AHI, T6, TM, L4, LEO, SRI, RLI, PPO,
75V.A maximum. DIMENSIONS, WEIGHT: 178mm high x 438mm wide x 448mm
deep (7” x 17 l/4” x 17 3/8”). Net weight 8.6kg (19 Ibs). ACCESSORIES AVAILABLE:
Model 7008-3: IEEE-488 Cable, 0.9m (3 ft.) Model 70086: IEEE-488 Cable, 1.8m (6 ft.) Model 7010: IEEE-488 Adapter for Model 85 Computer. Model 7024-I: Triaxial Cable, 0.3m (I ft.) Model 7024-3: Triaxial Cable, 0.9m (3 ft.) Model 7024IO:Triaxial Cable, 3.0m (IO ft.1 Model 7051-2: BNC to BNC Cable, 0.6m (2 ft.) Model 7051-5: BNC to BNC Cable, 1.5m (5 ft.) Model 7052: 4 x 5 Matrix Card Model 7053: High Current Scanner Card Model 7054: High Voltage Scanner Card Model 7056: General Purpose Scanner Card Model 7057A: Thermocouple Scanner Card Model 7058: Low Current Scanner Card Model 7059: Low Voltage Scanner Card Model 7061: Universal Interface Card Model 7068: Fixed Rack Mounting Kit for 706 Model 7069: Slide Rack Mounting Kit for 706
BATTERY BACKUP: Rechargeable 3.6V nickel-cadmium. I month retention of data with unit turned off.
OPERATING ENVIRONMENT: O” to 50°C, 0% to 80% relative humidity up to 35OC.