2015年美国荷兰摩托车公司Honda生产的SXS1000M3车型的配件安装说明书
合集下载
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
LEFT BED SIDE COVER
9. Install the well nuts as shown.
LEFT BED SIDE COVER
LEFT BED SIDE COLOR PANEL
MARKER Mark in the center.
8. Remove the left bed side color panel. Drill 9.5 mm holes at the marked points using an electric drill.
<Left side>
(4) (7)
(8)
(9)
(3)
Align with the line of left front door.
No.
Description
Qty
(1)
Right front door panel
1
(2)
Left front door panel
1
(3)
Well nut
18
(4)
LEFT BED SIDE COVER
ELECTRIC DRILL (9.5 mm BIT)
ELECTRIC DRILL (9.5 mm BIT)
3. Install the well nuts as shown.
LEFT FRONT DOOR
BOLT (Save)
6. Temporarily install the left bed side color panel as shown.
Accessory
Application
INSTALLATION INSTRUCTIONS
COLOR PANELS (3P)
P/N 08F70-HL4-A51ZD (Red) P/N 08F70-HL4-A51ZE (Green)
SXS1000M3
Honda Dealer: Please give a copy of these instructions to your customer.
Publication No.
MII 15262
Issue Date
September 2015
PARTS LIST
(5)
TORQUE CHART
Tighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts.
10 mm
ELECTRICAL TAPE
WELL NUT
10. Install the left bed side color panel as shown.
LEFT BED SIDE COLOR PANEL
MARK
LEFT BED SIDE COVER
WASHER
8 mm SPECIAL BOLT
LEFT FRONT DOOR PANEL
© 2015 American Honda Motor Co., Inc. - All Rights Reserved.
1 of 3
87974-HL4-A510
2. Remove the left front door panel. Drill 9.5 mm holes at the marked points using an electric drill.
5 mm screw
18
(5)
Right bed side color panel
1
(6)
Left bed side color panel
1
(7)
Installation Instructions URL
1
(8)
Washer
18
(9)
8 mm special bolt
6
TOOLS AND SUPPLIES REQUIRED
• Remove any burrs from the edge of the hole.
Wind the tape around the drill bit, leaving 10 mm of the tip of the drill bit exposed, to serve as a drill-stop.
Item
N·m kgf·m Ibf·ft
5 mm screw
8 mm special bolt (6)
0.5 0.05 0.4
Hale Waihona Puke 262.719
INSTALLATION
(1)
1. Position the left front door panel as shown and make
(2)
marks at the positions shown.
• Remove any burrs from the edge of the hole.
Wind the tape around the drill bit, leaving 10 mm of the tip of the drill bit exposed, to serve as a drill-stop.
Hex wrench (5 and 6 mm) Electric drill Drill bit (9.5 mm) Ruler Electrical tape Marker Torque wrench
LEFT FRONT DOOR
MARKER Mark in the center.
MARKER Mark in the center.
10 mm
ELECTRICAL TAPE
MARK
LEFT FRONT DOOR
4. Install the left front door panel as shown.
5 mm SCREW
WASHER
LEFT FRONT DOOR PANEL
5 mm SCREW
5. Remove the indicated parts. <Left side>
5 mm SCREW
11. Repeat Steps 1 through 10 on the right side.
ELECTRIC DRILL (9.5 mm BIT)
3 of 3
LEFT BED SIDE COLOR PANEL
WELL NUT
2 of 3
8 mm SPECIAL BOLT
8 mm SPECIAL BOLT
7. Position the left bed side cover panel as shown and make marks at the positions shown.
9. Install the well nuts as shown.
LEFT BED SIDE COVER
LEFT BED SIDE COLOR PANEL
MARKER Mark in the center.
8. Remove the left bed side color panel. Drill 9.5 mm holes at the marked points using an electric drill.
<Left side>
(4) (7)
(8)
(9)
(3)
Align with the line of left front door.
No.
Description
Qty
(1)
Right front door panel
1
(2)
Left front door panel
1
(3)
Well nut
18
(4)
LEFT BED SIDE COVER
ELECTRIC DRILL (9.5 mm BIT)
ELECTRIC DRILL (9.5 mm BIT)
3. Install the well nuts as shown.
LEFT FRONT DOOR
BOLT (Save)
6. Temporarily install the left bed side color panel as shown.
Accessory
Application
INSTALLATION INSTRUCTIONS
COLOR PANELS (3P)
P/N 08F70-HL4-A51ZD (Red) P/N 08F70-HL4-A51ZE (Green)
SXS1000M3
Honda Dealer: Please give a copy of these instructions to your customer.
Publication No.
MII 15262
Issue Date
September 2015
PARTS LIST
(5)
TORQUE CHART
Tighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts.
10 mm
ELECTRICAL TAPE
WELL NUT
10. Install the left bed side color panel as shown.
LEFT BED SIDE COLOR PANEL
MARK
LEFT BED SIDE COVER
WASHER
8 mm SPECIAL BOLT
LEFT FRONT DOOR PANEL
© 2015 American Honda Motor Co., Inc. - All Rights Reserved.
1 of 3
87974-HL4-A510
2. Remove the left front door panel. Drill 9.5 mm holes at the marked points using an electric drill.
5 mm screw
18
(5)
Right bed side color panel
1
(6)
Left bed side color panel
1
(7)
Installation Instructions URL
1
(8)
Washer
18
(9)
8 mm special bolt
6
TOOLS AND SUPPLIES REQUIRED
• Remove any burrs from the edge of the hole.
Wind the tape around the drill bit, leaving 10 mm of the tip of the drill bit exposed, to serve as a drill-stop.
Item
N·m kgf·m Ibf·ft
5 mm screw
8 mm special bolt (6)
0.5 0.05 0.4
Hale Waihona Puke 262.719
INSTALLATION
(1)
1. Position the left front door panel as shown and make
(2)
marks at the positions shown.
• Remove any burrs from the edge of the hole.
Wind the tape around the drill bit, leaving 10 mm of the tip of the drill bit exposed, to serve as a drill-stop.
Hex wrench (5 and 6 mm) Electric drill Drill bit (9.5 mm) Ruler Electrical tape Marker Torque wrench
LEFT FRONT DOOR
MARKER Mark in the center.
MARKER Mark in the center.
10 mm
ELECTRICAL TAPE
MARK
LEFT FRONT DOOR
4. Install the left front door panel as shown.
5 mm SCREW
WASHER
LEFT FRONT DOOR PANEL
5 mm SCREW
5. Remove the indicated parts. <Left side>
5 mm SCREW
11. Repeat Steps 1 through 10 on the right side.
ELECTRIC DRILL (9.5 mm BIT)
3 of 3
LEFT BED SIDE COLOR PANEL
WELL NUT
2 of 3
8 mm SPECIAL BOLT
8 mm SPECIAL BOLT
7. Position the left bed side cover panel as shown and make marks at the positions shown.