Inspur DC Total Solution

合集下载

拜耳开发聚碳酸酯材料无针注射系统

的理想供应商。团
拜耳开发聚碳酸酯材料无针注射系统
拜耳材料科技日前在上海２１００国
疗级产品聚碳酸酯ＭａｒｌｎｋｏｏＲｘ－
●
，
ｔｌｔ
，
●
际医疗设备设计和技术展上展出了以聚碳酸酯为基础材料的胰岛素注射器、
生产速度远高于传统溶剂型产品的普通线速，其实际生产应用成本也小于溶剂型粘合剂，顺应未来包装粘合剂的发展趋势，同时陶氏产品
安全可靠、环保、且性能出众、应用成熟，成为他们跨入无溶剂复合
吸入器和微型给药泵等新型医疗设备产品。其中，令糖尿病患者关注的胰岛
０５０材料制成。该注射器是一种没２３有针头的新型注射器，在自生高压的作用下，在不到１秒的时间内，将胰
岛素药物通过皮肤压入体内，糖尿病
患者几乎没有痛感。圈
素注射器采用新开发的生物相容性医
２１００年２８卷第９期
国锄舯
年起在全国实施。圃
（博龙乐敏幸笑薇）徐
陶氏推出无溶剂型食品包装粘合剂
日前，全球领先的软包装粘合剂
解决方案供应商陶氏化学公司，在上海召开了其在中国首个关于无溶剂粘为业界提供更高性能、更环保安全的

ISOFLEX TOPAS L 32和L 32 N低温筋膜类型商品说明书

Product informationISOFLEX TOPAS L 32, L 32 N,Prod. 004130, 004227,enEdition 14.08.2019 [replaces edition 28.01.2019]Benefits for your application–Exceed OEM requirements of -40 °C–Long service life due to high corrosion protection and resistance to oxidation and ageing–Many years of successful use in the automotive industry (specified and approved by most car manufacturers and component suppliers worldwide)DescriptionISOFLEX TOPAS L 32 and L 32 N have been designed for extremely low temperatures. These greases consist of asynthetic hydrocarbon oil and a special lithium soap. ISOFLEX TOPAS L 32 and L 32 N are resistant to ageing and oxidation and provide good corrosion protection as well as water resistance.ISOFLEX TOPAS L 32 N also contains a UV indicator, which ensures quality checking even with minimum quantity lubrication.ApplicationISOFLEX TOPAS L 32 and L 32 N are especially used for the lubrication of small gears used in automotive engineering for electrical adjustment mechanisms, e.g. window lifters, sun roofs, seats, headlamps, fan flaps.Both products have been approved by renowned car manufacturers, such as –Volkswagen VW TL 778 A –Daimler DBL 6827.40 and –Daimler DBL 6827.41.ISOFLEX TOPAS L 32 and L 32 N can also be used for:–guideways, bowden cables, door locks –rolling bearings in small motors, fans, pumps–tooth flanks in plastic/plastic gears (e.g. POM, PA and PBT)or plastic/steel material combinations.Application notesThe lubricant is applied by spatula, brush, grease gun or cartridge.Material safety data sheetsMaterial safety data sheets can be requested via our website . You may also obtain them through your contact person at Klüber Lubrication.ISOFLEX TOPAS L 32, L 32 N Special low-temperature greasesISOFLEX TOPAS L 32, L 32 N,Prod. 004130, 004227,enEdition 14.08.2019 [replaces edition 28.01.2019]Product information。

ISO 4401大小的油气方向阀说明书

Options:only for DH-04 and DK-14, see section ݚ:/A = actuator device mounted on side of port B only for DP:/H = adjustable chokes for controlling the main spool shifting time(meter-out to the pilot chambers of the main valve)/H9= adjustable chokes for controlling the main spool shifting time(meter-in to the pilot chambers of the main valve)/R = with check valve on port P/S = main spool stroke adjustment (not available for DP-1*)Valve configuration, see section ݚ0= free, without springs1= spring centered, without detent 3= spring offset external position5= 2 external positions, with detent (only for DH and DK)7= center and external positionsHydraulic operated directional valvesISO 4401 size 06, 10, 16, 25 and 32Table E225-1/EHydraulic operated directional valves are spool type, three or four way, two or three position, designed to operate in oil hydraulic systems.Available with single or double hydraulic actuator.DH-0 = ISO 4401 size 06, flow up to 50 l/min DK-1 = ISO 4401 size 10, flow up to 160 l/min DP-1 = ISO 4401 size 10, flow up to 160 l/min DP-2 = ISO 4401 size 16, flow up to 300 l/min DP-3 = ISO 4401 size 25, flow up to 600 l/min DP-4 = ISO 4401 size 25, flow up to 700 l/min DP-6 = ISO 4401 size 32, flow up to 1000 l/min Max pressure:350 bar for DH-0, DP-1,DP-2, DP-3, DP-6315 bar for DK-1DH-0Type of actuator:4 = single actuator 5 = double actuatorSpool type, see section ݛ1MODEL CODEE225413/A **/*Directional control valve,size:DH-0 = 06DK-1 = 10DP-1 = 10DP-2 = 16DP-3 = 25DP-4 = 25 (high flow)DP-6 = 32Series numberHYDRAULIC CHARACTERISTICS2see note (1)3 (min) 5 (suggested)70Acting the actuator on port A,the hydraulic connections are P →B, A →T, except for spool type 4 and 5 where the con-nections are P →A, B →T.OperationThe spool displacement is achieved by hydraulic pressure on one of the pilot chambers, while the other is unloaded.When pressurizing port X, the port Y has to be directly connected to the tank at null pressure and viceversa.By pressurizing port X, the hydraulic connections are P →A, B →T, except for spool type 4 and 5 where the connections are P →B, A →T.In the spring centered versions the spool is centered by the spring action when both the pilot chambers are unloaded.1) The max pressure on port T has to be not over 50% of pilot pressure.Valve modelMax recommended flow [l/min]Max pressure on port P, A, B[bar]Max pressure on port T (also X, Y for DP)[bar]Minimum pilot pressure[bar]Max recommended pressure on piloting line[bar]3502504250DH-050350DK-1160315DP-1160DP-2300DP-3600DP-4700DP-61000Seals material:omit for NBR (mineral oil & water glycol)PE = FPM3MAIN CHARACTERISTICS OF HYDRAULIC OPERATED DIRECTIONAL VALVESAssembly position / location Any position except for valves type DH-050, DK-150, DP-*50 (without springs) that must be installed withtheir longitudinal axis horizontalSubplate surface finishing Roughness index Ra 0,4 - flatness ratio 0,01/100 (ISO 1101)Ambient temperature-20°C to + 70°CFluid Hydraulic oil as per DIN 51524...535, for other fluids see section ݗRecommended viscosity15 ÷ 100 mm2/s at 40°C (ISO VG 15 ÷ 100)Fluid contamination class ISO 4406 class 21/19/16 NAS 1638 class 10, in line filters of 25 μm (β25 _>75 recommended)Fluid temperature-20°C +60°C (standard seals) -20°C +80°C (/PE seals)4CONFIGURATIONS and SPOOLS valves type DH-*, DK-*NOTES-Spools type 0 and 3 are also available as 0/1 and 3/1, where in centre position oil passage from ports to tank are restricted;-Spools type 1,4 and 5 are also available as 1/1, 4/8 and 5/1. They are properly shaped to reduce water-hammer shocks during the switching;-Spool type 1, 3, 8 and 1/2 for DH-0 and DK-1 are available as 1P, 3P, 8P (only for DH-0), and 1/2P to limit valve leakage.-On request, other type of spools are available.5CONFIGURATIONS and SPOOLS valves type DP-*NOTES-Spools type 0 and 3 are also available as 0/1 and 3/1, where in centre position oil passage from ports to tank are restricted;-Spools type 1,4 and 5 are also available as 1/1, 4/8 and 5/1 (not available for DP-6). They are properly shaped to reduce water-hammer shocks during the switching;-On request, other type of spools are available.6Q/Δp DIAGRAMSDH-0See note and diagrams on table E010 relating the DH* valve from which DH-0* are derivatedDK-1See note and diagrams on table E025 relating the DKE, DKER valve from which DK-1* are derivatedDP-1See note and diagrams on table E085 relating the DPH*-1 valve from which DP-1* are derivatedDP-2See note and diagrams on table E085 relating the DPH*-2 valve from which DP-2* are derivatedDP-3See note and diagrams on table E085 relating the DPH*-3 valve from which DP-3* are derivatedDP-4See note and diagrams on table E085 relating the DPH*-4 valve from which DP-4* are derivatedDP-6See note and diagrams on table E085 relating the DPH*-6 valve from which DP-6* are derivated7DIMENSIONS OF HYDRAULIC OPERATED VALVES ISO 4401 size 06 and 10 [mm]E2258DIMENSIONS OF HYDRAULIC OPERATED VALVES ISO 4401 size 16, 25 and 32 [mm]06/13。

深水海纳公司产品介绍

12-15个月
第四级
超滤过滤器
韩国KOLON集团度假技术，仿肾脏透析原理，精密聚砜材质膜丝高效去除残留细菌、病毒，并保留有益矿物质。
24个月
三、“茉莉泉”淋浴净化器
产品外形：
型号：HBB 尺寸：220*70*142mm
零售价：398
产品特征

针对家庭沐浴用水，有效去除水中余氯、三卤甲烷、四氯化碳、硫化氢及重金属等对人体皮肤有侵害的物质；软化水质，降低水的硬度，减少水垢，保证沐浴用水的洁净； 40000升超大水处理量；安全、方便、免维护。长期使用，可美容保湿肌肤，保护肌肤健康，保护发质，同时还有按摩保健的功能。
9-12个月
第二级
椰炭滤芯
9-12个月
第三级
矿物质碱性还原滤芯
12-18个月
第四级
UF膜滤芯
24个月
技术参数
产品名称型号名外形尺寸冷热式净水机天灵 355*455*1250mm
水箱大小
冷水
3L
热水
2.8L
储水
10L
额定电压有效净水量耗电量
220W,60Hz 2700L 冷水 10 热水 5 W 450W
深水海纳公司产品介绍
资料整合：王晨宇
一、洁水天使（HC-UF-1800）
产品外形：
尺寸：380*130*385mm 价格：2180
产品特征

产品采用超滤工艺，能有效去除原水中的泥沙、悬浮物、胶体、余氯、有机物、重金属、细菌、病毒等对人体有害物质，同时保留对人体有益的微量元素和矿物质，出水可直接饮用，长期饮用，有利健康；全自动机械控制制水，无需电源；安装、使用、维护方便；适合安装于家庭厨柜内；获得韩国净水协会“水”认证、ISO、AWT、 UKAS等多种国际认证，质量更有保障。

普立万公司推出针对医疗保健应用的抗菌溶液助剂

商们现在可以利用Ｗｉｓｎｔｔｄ抗菌技术来达到目的．ｈａ ”普立万全球医疗市场总监，ａｒｏｎｏＬｒＪｈｓｎ说，这一新型助剂为ｙ “ 我们的客户增强产品在医疗工业巾实际性能和价值。 ”
新产品扩大了公司在医疗保健＿面的溶液助剂产品种类。方细菌和微牛物的繁殖是医疗机构面临的严重问题。在美团．每年大约有１万人死于在医院病房中的感染。而且０
效降低成本和提高性能。整个系统结合了荧奎的子公司
据Ａｄａｔ公司介绍．ｅｍｓｒ高达ｌ２０℃温ｄｍｓｒｅＶｒａｔ在ｉｅｏ
度下仍保持稳定，会影响最终制品的透明性、色色泽和不颜
物理性能。
热压、塑、压以及其他食品接触类生物高分子的加工。吹碾
户化的设计可以简化客户的使用井满足其需
要。Ｗｉｓｎｔｔｄ同样包括一系列辅助服务：ｈａ助制和用量选择、
加工和产品丌发说明以及效牢检测。这些服务可以帮助减少产品投入市场ｎｌ并保持高质量的抗菌保护。，￣ｔｌ既可以作为助剂单独使用，也可以与其他普立万系列
的认证，可以销售Ｇｒｐｉｒｎｔａｈｓｅｇｈ型号的多壁碳纳米管ｔ

希森美康血凝仪

CS-2100i/2000i根据SYSMEX在血栓与止血领域多年积累的经验，为全面满足各类实验室的需求率先开发CS-2100i/2000i。

四种方法学：凝固法/发色底物法/免疫比浊法/聚集法unique!多波长高精度光学检测：5种波长检测提供可靠数据新型智能监测：特有的HIL check 功能排除溶血/黄疸/脂血干扰更多新检测项目的选择：FXIII，vWF:Rco等更可靠的实验室质量保证：SNCS实时在线质控全面满足血栓与止血检测需求！CA-7000以全球最快的分析速度提供全面和高精准的止凝血项目检测结果，仪器集中了凝固法，发色底物法和免疫法于一体，设计高度人性化和智能化，操作简便，成为大规模实验室的首选。

● 多参数测试，500测试/小时高速分析能力● 操作简便，灵活对待各种需求● 优秀的试剂管理系统（SRS）● 安全、实用的系统设计● 大容量的数据管理能力，完整的质控系统CA-1500汇集了当今血栓/止血分析仪最新的各种先进功能于一身，是市场上少见的性能/价格比极高的一台仪器，是大型教学医院，综合医院实验室的首选。

它具有快速处理能力，最快180测试/小时，集多种检测功能于一身：凝固法、发色底物法、免疫法。

具有全能随机组合能力，两种方法测定纤维蛋白质，适合常规大量和急诊使用。

● 拥有高速处理能力、随机测试功能和自动再检查功能● 三种分析方式，包括多规则监视的广泛质控文件和平行线生物分析功能● 卓越的性能可以灵活适应实验室的多样化需求CA-500系列CA-500系列包含了六款机型，设计新颖、符合经济原则，是各中小型实验室开展血栓/止血实验的最佳选择，也是半自动升级到全自动的理想机型。

小型台式仪实用可靠,具备三种检测系统即凝固法、发色底物法、免疫法的自由组合用户可根据需要选择相应机型。

CA-50设计上完全沿用了全自动CA系列的检测原理，锁定人为误差因素的设计确保它有别于其他半自动血凝仪，达到全自动仪器的准确性与重复性效果，四通道即可批量检测又可单独检测，内置质控文件，适用于小标本量实验室使用。

DC201 FastPure

使用说明书Version 21.201/产品概述 02/产品组分03/保存条件04/适用范围05/自备材料06/注意事项07/实验原理与流程概要08/实验流程09/常见问题与解决方案目录 Contents .................................................................................................... 02.................................................................................................... 02.................................................................................................... 02. (02) (03) (03) (03) (04) (05)*所有商标均属于各自商标所有者的财产。

某些商标并未在全部行政区注册。

01/ 0202/产品组分01/产品概述取1 - 5 ml 过夜培养的菌液，采用优化的SDS-碱裂解法裂解细胞，30 min 可以完成多个样品的抽提工作，提取过程无需酚氯仿抽提、乙醇沉淀等步骤，采用独特的离心吸附柱在高盐、低pH 状态下高效特异的结合溶液中的质粒DNA ，并最大限度的去除蛋白质、基因组、RNA 和其他杂质，最后在低盐、高pH 的洗脱缓冲液将纯净质粒DNA 从硅基质膜上洗脱，每个吸附柱可吸附高达35 μg 的质粒DNA 。

纯化的质粒DNA 可直接用于酶切、PCR 、测序、连接、转化、转染一些常规的传代细胞等生物学实验。

04/适用范围本产品适用1 - 5 ml 过夜培养的菌液；处理低拷贝质粒时，按比例扩大Buffer P1、Buffer P2和Buffer P3的用量，可将菌液量提升至5 -10 ml 。

Sikaflex

PRODUCT DATA SHEET Sikaflex®-271 PowerCureVersion 03.01 (04 - 2023), en_AU012001252710001000PRODUCT DATA SHEETSikaflex®-271 PowerCureAccelerated glazing adhesiveTYPICAL PRODUCT DATA (FURTHER VALUES SEE SAFETY DATA SHEET)Chemical base Polyurethane Colour (CQP001-1)BlackCure mechanism Moisture-curing A Density (uncured)1.2 kg/l Non-sag properties (CQP061-1)Very good Application temperature 5 ─ 40 °C Open time (CQP526-1)10 minutes B Early tensile lap-shear strength (CQP046-1)See table 1Shore A hardness (CQP023-1 / ISO 48-4)65Tensile strength (CQP036-1 / ISO 527)7 MPa Elongation at break (CQP036-1 / ISO 527)300 %Tear propagation resistance (CQP045-1 / ISO 34)10 N/mm Tensile lap-shear strength (CQP046-1 / ISO 4587) 5 MPa Service temperature (CQP509-1 / CQP513-1)-40 ─ 90 °C Shelf life9 monthsCQP = Corporate Quality Procedure A Provided by PowerCure B 23 °C / 50 % r.h.DESCRIPTIONSikaflex®-271 PowerCure is an accelerated elastic polyurethane adhesive for glazing and vehicle-glass-replacement applications. Suit-able for bonding materials relevant for direct glazing such as paints, glass, ceramic frits, painted and e-coated surfaces in commercial-vehicle production and repair.Curing of Sikaflex®-271 PowerCure is acceler-ated by Sika’s PowerCure technology which makes it largely independent of atmospheric conditions.PRODUCT BENEFITSAccelerated curing and adhesion build-up ▪Excellent application properties▪Ideal for glass replacement in commercial vehicles▪Low climate dependency of the curing speed with Sika® Booster ▪High mechanical strength ▪Solvent-free▪AREAS OF APPLICATIONSikaflex®-271 PowerCure is designed espe-cially for manual direct-glazing application, and vehicle-glass replacement in commercial vehicles. Thanks to the PowerCure Techno-logy Sikaflex®-271 PowerCure exhibits a fast strength and adhesion build-up.This product is suitable for experienced pro-fessional users only. Tests with actual sub-strates and conditions have to be performed to ensure adhesion and material compatibil-ity.1 / 2CURE MECHANISMSikaflex®-271 PowerCure cures by reaction with moisture provided by the accelerator paste and largely independent from atmo-spheric moisture. For typical strength build up data see table below.Time [h]Tensile lap-shear strength at23 °C [MPa]10.72 3.5Table 1: Strength build-up of Sikaflex®-271 PowerCure CHEMICAL RESISTANCESikaflex®-271 PowerCure is generally resistant to fresh water, seawater, diluted acids and di-luted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated mineral acids and caustic solutions or solvents.METHOD OF APPLICATIONSurface preparationSurfaces must be clean, dry and free from grease, oil and dust. Surface treatment de-pends on the specific nature of the substrates and is crucial for a long lasting bond. All pre-treatment steps must be confirmed by pre-liminary tests on original substrates consider-ing specific conditions in the assembly pro-cess.ApplicationSetup the PowerCure Dispenser according to the PowerCure User Manual. If the applica-tion is discontinued for more than 2 minutes, the mixer needs to be replaced.Sikaflex®-271 PowerCure can be processed between 5 °C and 40 °C, but changes in react-ivity as well as application properties need to be considered. The optimum temperature for substrate and adhesive is between 15 °C and 25 °C.The open time is significantly shorter in hotand humid climates. The parts must always bejoined within the open time. As a rule ofthumb, a change of + 10 °C reduces the opentime by half.To ensure a uniform thickness of the bondlineit is recommended to apply the adhesive inthe form of a triangular bead (see figure 1).Figure 1: Recommended bead configurationRemovalUncured Sikaflex®-271 PowerCure can be re-moved from tools and equipment with Sika®Remover-208 or another suitable solvent.Once cured, the material can only be re-moved mechanically. Hands and exposed skinhave to be washed immediately using handwipes such as Sika® Cleaner-350H or a suit-able industrial hand cleaner and water. Donot use solvents on skin.FURTHER INFORMATIONThe information herein is offered for generalguidance only. Advice on specific applicationsis available on request from the Technical De-partment of Sika Industry.Copies of the following publications are avail-able on request:Safety Data Sheets▪General GuidelinesBonding and Sealing with 1-componentSikaflex®▪PowerCure User Manual▪PowerCure Quick Reference Guide▪PACKAGING INFORMATIONPowerCure Pack600 mlBASIS OF PRODUCT DATAAll technical data stated in this document arebased on laboratory tests. Actual measureddata may vary due to circumstances beyondour control.HEALTH AND SAFETY INFORMATIONFor information and advice regarding trans-portation, handling, storage and disposal ofchemical products, users shall refer to the ac-tual Safety Data Sheets containing physical,ecological, toxicological and other safety-re-lated data.DISCLAIMERThe information, and, in particular, the re-commendations relating to the applicationand enduse of Sika products, are given ingood faith based on Sika's current knowledgeand experience of the products when prop-erly stored, handled and applied under nor-mal conditions in accordance with Sika's re-commendations. In practice, the differencesin materials, substrates and actual site condi-tions are such that no warranty in respect ofmerchantability or of fitness for a particularpurpose, nor any liability arising out of anylegal relationship whatsoever, can be inferredeither from this information, or from any writ-ten recommendations, or from any other ad-vice offered. The user of the product musttest the product's suitability for the intendedapplication and purpose. Sika reserves theright to change the properties of its products.The proprietary rights of third parties must beobserved. All orders are accepted subject toour current terms of sale and delivery. Usersmust always refer to the most recent issue ofthe local Product Data Sheet for the productconcerned, copies of which will be suppliedon request.PRODUCT DATA SHEET Sikaflex®-271 PowerCure Version 03.01 (04 - 2023), en_AU 012001252710001000Sika Australia Pty Limited ABN 12 001 342 329 Tel: 1300 22 33 482 / 2。

普洛麦格公司MSI Analysis System说明书

Promega 公司普洛麦格公司（Promega Corporation）成立于1978年，总部设在美国威斯康星州麦迪逊市，在16个国家设有分公司，在全球范围内还有50多个经销商，服务全球100多个国家。

普洛麦格公司是为生命科学产业提供创新型解决方案和技术支持的领导者。

公司拥有3,000多种产品，致力于提高全球范围内的科学家对基因组学、蛋白质组学、细胞分析、分子诊断和遗传鉴定等领域的认知。

普洛麦格产品不仅被生命科学研究者用于对生物学基本问题的理论研究，也被广泛应用于应用科学领域，以帮助诊断、疾病治疗、发现新的治疗方法及应用遗传和DNA测试进行人类遗传鉴定。

普洛麦格公司在多个重要领域拥有重要知识产权和许可，包括：●生物发光，包括基因工程改造的荧光素酶、荧光素酶载体和底物●短串联重复（STR）分析用于基于STR分析的细胞系鉴定、人类遗传鉴定、细胞和组织鉴定及混合样本检测●Halo Tag®蛋白标记和捕获技术微卫星不稳定性及DNA 错配修复微卫星是短串联重复DNA 序列，长度为1-6个碱基对。

这些重复序列广泛存在于基因组中，并且由于其在基因座位点串联重复次数不同，这些重复序列的长度在不同个体中经常有差异。

微卫星标志物可以用于检测微卫星不稳定性（基因组不稳定性的一种）。

微卫星不稳定（Microsatellite Instability ，MSI ）是微卫星等位基因长度的改变，这种改变是由于DNA 复制过程中重复单元的插入或删除以及DNA 错配修复系统纠错失败造成的。

微卫星是短串联重复DNA序列，长度为1-6个碱基对。

这些重复序列广泛存在于基因组中，并且由于其在每一基因座位点串联重复次数不同，这些重复序列的长度在不同个体中经常有差异。

微卫星标志物可以用于检测微卫星不稳定性（基因组不稳定性的一种）。

微卫星不稳定（Microsatellite Instability，MSI）是微卫星等位基因长度的改变，这种改变是由于DNA复制过程中重复单元的插入或删除以及DNA错配修复系统纠错失败造成的。

inhalation solution 英文说明书

inhalation solution 英文说明书Inhalation Solution**产品简介：**This Inhalation Solution is a medical preparation designed for administration via inhalation, providing targeted and rapid therapeutic effects to the respiratory system. It is formulated with carefully selected active ingredients and excipients to ensure optimal efficacy and safety in managing various respiratory conditions.**产品用途：**This Inhalation Solution is indicated for the treatment and management of respiratory disorders such as asthma, chronic obstructive pulmonary disease (COPD), bronchitis, and other conditions characterized by bronchoconstriction, inflammation, or excessive mucus production. It may also be used for prophylactic purposes in individuals prone to respiratory exacerbations.**成分与规格：**The Inhalation Solution contains the following active ingredients: (insert specific drug names and concentrations). It is available in (insert volume, e.g.,20ml) multidose vials, each containing a preservative-free formulation for multiple uses.**用法用量：**Administer the Inhalation Solution using a suitable nebulizer device according to the manufacturer's instructions. The recommended dose is (insert specific dose and frequency, e.g., 2.5mg twice daily). Adjustments may be necessary based on individual patient response and physician guidance. Ensure proper cleaning and maintenance of the nebulizer equipment to maintain product effectiveness and hygiene.**注意事项：**1. **Allergic Reactions**: Discontinue use immediately if signs of allergic reactions such as hives, difficulty breathing, or swelling occur. Seek medical attention promptly.2. **Cardiovascular Conditions**: Use with caution in patients with cardiovascular diseases, particularly those with arrhythmias or hypertension, as certain ingredients may affect heart function.3. **Concomitant Medications**: Inform your healthcare provider about all medications you arecurrently taking, including over-the-counter drugs, herbal supplements, and aerosolized therapies, as potential interactions may affect treatment efficacy or increase side effects.4. **Pregnancy & Lactation**: Consult your physician before using this Inhalation Solution if you are pregnant, planning to become pregnant, or breastfeeding, as its safety in these situations has not been established.**副作用与不良反应：**Common side effects may include throat irritation, coughing, and transient taste alterations. Less frequently, users may experience tremors, palpitations, or paradoxical bronchospasm. Report any persistent or severe adverse reactions to your healthcare provider.**存储条件与有效期：**Store the Inhalation Solution at room temperature (15-25°C), avoiding direct sunlight and moisture. Keep out of reach of children. Do not use beyond the expiration date printed on the packaging.**废弃处理：**Dispose of unused or expired Inhalation Solution and empty containers in accordance with local waste disposalregulations. Do not flush down the toilet or pour into drains.**制造商信息：**This Inhalation Solution is manufactured by (insert company name) and distributed by its authorized representatives. For further information, please refer to the package insert or contact the manufacturer directly.**重要提示：**This product is a prescription medication. Always use under the guidance of a qualified healthcare professional. Adhere to the prescribed dosage and administration schedule. Do not alter, discontinue, or self-prescribe without consulting your physician.---**Product Name:**Inhalation Solution**Product Introduction:**This Inhalation Solution is a medicinal preparation tailored for inhalational administration, delivering targeted and swift therapeutic benefits to the respiratory system. It incorporates meticulously chosen active substances and excipients to guarantee supreme efficacyand safety in addressing diverse respiratory ailments.**Product Usage:**This Inhalation Solution is intended for treating and managing respiratory disorders such as asthma, chronic obstructive pulmonary disease (COPD), bronchitis, and other conditions marked by bronchoconstriction, inflammation, or excessive mucus secretion. It can also serve prophylactic purposes in individuals susceptible to respiratory exacerbations.**Ingredients & Specifications:**The Inhalation Solution comprises the following active ingredients: (insert specific drug names and concentrations). It comes in (insert volume, e.g., 20ml) multidose vials, each filled with a preservative-free formula for multiple applications.**Usage & Dosage:**Administer the Inhalation Solution utilizing an appropriate nebulizer device in accordance with the manufacturer's guidelines. The suggested dose is (insert specific dose and frequency, e.g., 2.5mg twice daily). Adjustments might be needed based on individual patient response and physician advice. Ensure thorough cleaningand upkeep of the nebulizer equipment to preserve product efficiency and cleanliness.**Precautions:**1. **Allergic Reactions**: Cease usage immediately upon manifestation of allergy symptoms like hives, breathing difficulties, or swelling. Promptly seek medical assistance.2. **Cardiovascular Conditions**: Exercise caution when using in patients with cardiovascular diseases, especially those with arrhythmias or hypertension, as some ingredients could impact cardiac function.3. **Concurrent Medications**: Instruct your healthcare provider about all medicines you are currently taking, encompassing OTC drugs, herbal supplements, and aerosol therapies, as potential interactions may influence treatment effectiveness or escalate side effects.4. **Pregnancy & Lactation**: Consult your physician prior to using this Inhalation Solution if you are pregnant, planning pregnancy, or nursing, since its safety in such circumstances remains unestablished.**Side Effects & Adverse Reactions:**Typical side effects may involve throat discomfort,coughing, and temporary taste changes. Less commonly, users might encounter tremors, palpitations, or paradoxical bronchospasm. Report any persistent or severe adverse responses to your healthcare provider.**Storage Conditions & Expiration:**Store the Inhalation Solution at room temperature (15-25°C), steering clear of direct sunlight and moisture. Keep away from children's reach. Do not use post the expiration date inscribed on the packaging.**Disposal Instructions:**Dispose of unused or expired Inhalation Solution and empty containers in line with local waste disposal regulations. Do not flush down the toilet or pour into sinks.**Manufacturer Information:**This Inhalation Solution is produced by (insert company name) and distributed through its authorized agents. For more details, kindly refer to the package insert or contact the manufacturer directly.**Important Reminder:**This product is a prescription medicine. Always utilize under the supervision of a qualified healthcarepractitioner. Adhere strictly to the prescribed dosage and administration schedule. Do not modify, discontinue, or self-prescribe without consulting your physician.。

先进控制系统APC+2.0在聚乙烯装置操作优化中的应用

加工设备与应用CHINA SYNTHETIC RESIN AND PLASTICS合成树脂及塑料， 2024， 41（2）： 59先进控制系统APC+2.0在聚乙烯装置操作优化中的应用梅智鹏（福建炼油化工有限公司，福建泉州 362100）摘要：先进控制系统APC+2.0投用后使聚乙烯装置可靠性、产品质量控制、牌号切换控制都有较大提升，但在运行测试期间出现产品质量稳定性波动和切换牌号波动的问题。

通过对测试数据进行分析，优化了配方参数和操作方案。

运行效果表明：优化后的APC+2.0显著提升了最大加工负荷，降低了切换牌号时副牌号产品数量，减少了异戊烷消耗量，降低了操作强度，提升了产品质量稳定性，实现了产品价值的优化目标，为装置持续带来经济效益。

关键词：聚乙烯先进控制系统APC+2.0 运行难题操作优化运行效果中图分类号： TQ 325.1+2 文献标志码： B 文章编号： 1002-1396（2024）02-0059-07Application of advanced process control system APC+2.0 in optimization of PE plant operationMei Zhipeng（Fujian Petrochemical Company Limited ，Quanzhou 362100，China ）Abstract ： The reliability，product quality control and grade switch control of polyethylene unit have been greatly improved after the commissioning of advanced process control system APC+2.0. Two challenges of product quality and grade switch fluctuation appeared during the operation test. The formula parameters and operation program were optimized by analyzing the test data. The operation results show that the optimized APC+2.0 significantly improves the maximum load，reduces the off-specification products as a result of gradeswitch，saves the reactor 's consumption of iso-pentane，lowers the operational labor intensity，improves the product stability，furthers the product value，and brings economic benefits for the unit on a continuous basis.Keywords ： polyethylene； advanced control system APC+2.0； operational challenge； operation optimization； operation result收稿日期： 2023-10-17；修回日期： 2024-01-16。

检测细胞中1—磷酸鞘氨醇含量的LC—MS／MS分析方法的建立

检测细胞中1—磷酸鞘氨醇含量的LC—MS／MS分析方法的建立目的建立并确证可以检测1-磷酸鞘氨醇（S1P）快速、灵敏、特异的LC-MS/MS定量分析方法。

方法采用C17-S1P作为内参，甲醇一步法进行蛋白沉淀，随后进行正相电喷雾离子化LC-MS/MS分析。

流动相为甲醇-0.1%甲酸水（95∶5，v/v），流速0.2 mL/min，每个样品的分析时间为4 min。

细胞经TNF-α处理后S1P含量显著增加；而经DMS处理后S1P含量显著下降。

结果S1P的标准曲线线性范围为0.1～10 ng/mL。

Sentinel X400 500ml 清洗剂说明书

化学品安全技术说明书产品名称: Sentinel X400 500ml 最初编制日期: 17/09/2018修订日期: 26/06/2019 依据GB/T 16483、GB/T 17519编制版本: 1.1SDS编号: 12301-0035第 1 部分化学品及企业标识产品名称 (中文名): Sentinel X400 500ml产品名称 (英文名) : Sentinel X400 500ml企业名称: Sentinel Performance Solutions LTD标题: 制造商地址: 英国, Warrington, Cheshire, WA4 4BS, 7650 Daresbury 传真: +44 (0)1928 562 070电话号码: +44 (0)1928 704 330电子邮件地址:化学事故应急咨询电话:+86 512 8090 3042 (alternative)分销商: Vaillant Group (China) Heat, Cooling and EnvironmentalTechnology Co., Ltd.地址: Shanghai, 12-15F Jingwei International Plaza,No 558 Luban Road, Huangpu District邮政编码: 200023电话号码:电子邮件地址:建议用途: 中央供暖系统的清污剂第 2 部分危险性概述紧急情况概述GHS 分类健康危害: 皮肤腐蚀/刺激类别1B环境危害: 危害水生环境- 长期危险类别3除上述提到的危害外，没有其他危害的相关信息标签要素象形图 (GHS CN) :警示语 (GHS CN) : 危险。

危险说明 (GHS CN) : H314 - 造成严重皮肤灼伤和眼损伤H412 - 对水生生物有害并具有长期持续影响。

防范说明 (GHS CN)预防措施: P273 - 避免释放到环境中P280 - 戴防护手套、戴防护眼罩。

NVIDIA RTX 服务器解决方案设计指南说明书

TABLE OF CONTENTSChapter 1.SOLUTION OVERVIEW (1)1.1NVIDIA RTX Server Overview (1)Chapter 2.SOLUTION DETAILS (2)2.1Solution Configuration (3)Designed and tested through multi-vendor cooperation between NVIDIA and its system and ISV partners, NVIDIA RTX™ Server provides a trusted environment for artists and designers to create professional, photorealistic images for the Media & Entertainment; Architecture, Engineering & Construction; and Manufacturing & Design industries.1.1NVIDIA RTX SERVER OVERVIEWIntroduction:Content production is undergoing a massive surge as render complexity and quality increases. Designers and artists across industries continually strive to produce more visually rich content faster than ever before, yet find their creativity and productivity bound by inefficient CPU-based render solutions. NVIDIA RTX™ Server is a validated solution that brings GPU-accelerated power and performance to deliver the most efficient end-to-end rendering solution, from interactive sessions in the desktop to final batch rendering in the data center. Audience:The audience for this document include, but not limited to: Sales Engineers, Field Consultants, Professional Services, Partner Engineers, IT Managers and Customers who wish to take advantage of an appliance that is built and optimized to deliver on batch rendering workflows.NVIDIA RTX™ Server for Bare Metal Rendering with Autodesk Arnold 5.3.0.0 on InspurNF5468M5 Server is a reference design comprised of (a) NVIDIA Quadro RTX 8000 graphics cards; (b) Autodesk Arnold 5.3.0.0 rendering software; on a (c) Inspur NF5468M5 Server system. Combined, this validated solution provides unprecedented rendering and compute performance at a fraction of the cost, space, and power consumption of traditional CPU-based render nodes.NVIDIA Quadro RTX 8000, powered by the NVIDIA Turing™ architecture and the NVIDIA RTX platform, brings the most significant advancement in computer graphics in over a decade to professional workflows. Designers and artists can now wield the power of hardware-accelerated ray tracing, deep learning, and advanced shading to dramatically boost productivity and create amazing content faster than ever before.Autodesk Arnold software is an advanced Monte Carlo raytracing renderer. It’s designed for artists and for the demands of modern animation and visual effects (VFX) production. Originally co-developed with Sony Pictures Imageworks and now their main renderer, Arnold is used at over 300 studios worldwide including ILM, Framestore, MPC, The Mill and Digic Pictures. Arnold was the primary renderer on dozens of films from Monster House and Cloudy with a Chance of Meatballs to Pacific Rim and Gravity. It is available as a standalone renderer on Linux, Windows and Mac OS X, with supported plug-ins for Maya, 3dsMax, Houdini, Cinema 4D, and Katana. It is the built-in interactive renderer for Maya and 3dsMax.Inspur NF5468M5 is designed for large-scale deployment in data center and optimization of edge computing. Equipped with the advanced Intel Xeon Skylake processor, it supports 8x NVDIA 8000 GPUs in a compact 4U chassis, making it an ideal choice for Al Cloud, security, finance, communication, healthcare and other scenarios.2.1SOLUTION CONFIGURATIONTable 1 outlines the system configuration utilized to complete the rigorous NVIDIA NVQual verification as well as the NVIDIA RTX Server validation process.Table 1: Solution componentsNoticeALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, “MATERIALS”) ARE BEING PROVIDED “AS IS.” NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE.Information furnished is believed to be accurate and reliable. However, NVIDIA Corporation assumes no responsibility for the consequences of use of such information or for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication of otherwise under any patent rights of NVIDIA Corporation. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all other information previously supplied. NVIDIA Corporation products are not authorized as critical components in life support devices or systems without express written approval of NVIDIA Corporation.TrademarksNVIDIA, the NVIDIA logo, and DGX are trademarks or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated.Copyright© 2019 NVIDIA Corporation. All rights reserved.。

罗杰斯公司 RO2800 TM 低介电电路材料使用说明书

产品安全信息表1.材料（制剂）和公司（企业）的正式名称商品名：RO2800TM 低介电电路材料化学分类：聚四氟乙烯复合材料HMIS 等级：H 1F1R0物品用途印刷电路板发布日期：2014 年 3 月 25 日公司（企业）的正式名称：罗杰斯公司 (Rogers Corporation)100 South Roosevelt AvenueChandler, AZ 85226-3415电话：001-480-961-1382传真：001-480-961-4533电子邮件：******************************2.危害识别材料分类：NE标签要求：NE过度暴露影响：正常操作下无预期危害。

加工会产生粉尘。

在超过分解温度的条件下加工材料会释放有害烟雾。

吸入：粉尘会刺激呼吸系统。

暴露于铜尘或 PTFE分解产物会引起金属或聚合物烟热症状。

以流感样症状（发热、寒颤、肌肉疼痛）为特征，约持续 24 小时。

眼睛接触：粉尘会引起机械性刺激。

皮肤接触：粉尘会引起机械性刺激。

吞食：未知。

慢性危害：未知。

3.原料成分/信息该物质根据 20 CFR 1910.1200 和 REGULATION (EC) N° 1907/2006 生产，因此不属于危害沟通标准及 REACH 范畴内。

在正常使用状况下该物质不会释放有害化学物质，因此无需安全数据说明书。

化学品名称CAS 编号欧洲现有商业化学物质名录/欧洲已通报化学物质名录%OSHA容许接触限值ACGIH最高浓度阈限值欧盟分类熔融石英60676-86-0262-373-8有所不同5毫克/立方米（呼吸尘）3毫克/立方米（呼吸尘）根据 67/548/EEC 未分类第1二氧化钛13463-67-7236-675-5有所不同15毫克/立方米（总粉尘量）10毫克/立方米（总粉尘量）根据 67/548/EEC 未分类铜7440-50-8231-159-6有所不同1毫克/立方米（粉尘和烟雾）1毫克/立方米（粉尘和烟雾）根据 67/548/EEC 未分类4.急救措施吸入：（粉尘和烟雾）移至空气新鲜处。

亚特兰蒂克超导能源公司 UV 水纯化产品说明书

and systems are manufactured in the USA.Model S50C20 GPMModel S37C12 GPMModel S23A6 GPMModel S17A3 GPM(For larger flow rates, see page 9)23 • M The water enters the purifier and flows into the annular space between the quartz sleeve and the chamber wall.N The wiper segments induce turbulence in the flowing liquid to assure uniform exposure of suspended microorganisms to the lethal ultraviolet rays.O Translucent sight port provides positive indication of germicidal lamp operation. P The wiper assembly facilitates periodic cleaning of the quartz sleeve without any disassembly or interruption of purifier operation.Q Water leaving the purifier is instantly ready for use.Model S23A 6 GPMEffectiveVirtually all microorganisms are susceptible to SANITRON ® ultraviolet disinfectionEconomicalHundreds of gallons are purified for each penny of operating costSafeNo danger of overdosing, no addition of chemicalsFastWater is ready for use as soon as it leaves the purifier – no further contact time requiredEasySimple installation and maintenance— Compact units require minimum spaceAutomaticProvides continuous disinfection without special attention or measurementChemical FreeNo chlorine taste or corrosion problemsVersatileCapacities available from 3 to 416 gallons per minute (GPM)Model S2400C40 GPMCRYSTAL CLEAR TM Quartz SleeveEnsures optimum lamp output at normal potable water temperatures. (See interior detail page 3.)Quick Lamp ChangeExclusive EASY-OFF TM End Cap enables effortless lamp replacement without shutdown of water pressure or drainage of tank. No tools required.Removable Flanged HeadUnits disassemble completely and easily in the event that repairs are necessary. No special tools or fixtures required. (Models S2400C and larger feature dual removable heads.)Sight Port PlugVisible glow provides positive indication of germicidal lamp operation.Wiper LockLocks wiper mechanism in retracted position.Patented Dual Action Wiper MechanismFacilitates periodic cleaning of quartz sleeve without interruption of purifier operation. No disassembly required. Complies with U.S Public Health Guidelines.Drain PlugConvenient, in-place drainage of purifier chamber.Type 316 Stainless Steel ConstructionChamber, head, and clamp are made fromelectropolished and passivated stainless steel for an attractive finish and dependable service.STER-L-RAY ® Germicidal Lamp (not shown)Provides the utmost in quaility, sustained5 • Options may be obtained when purchase of SANITRON ® unit is made or added at a later date. For further details visit and .Promate TM Audio AlarmActivated by the SENTRY TM or GUARDIAN TM and alerts user to any malfunction detected Promate TMElapsed Time Indicator Real-time, non-resettable display of accumulated operating hoursPromateTMSolenoid Valve Operates with theGUARDIAN TM or SENTRY TM and prevents flow during detected malfunctionsPromate TMTime Delay Mechanism Operates with GUARDIAN TM or SENTRY TM and Promate TM solenoid valve to provide a 2-minute warm-up period for lamp to achieve full germicidal output SureFLO TMFlow Control Valve • Limits water flow to rated capacities• Available in PVC and stainless steel Promate TMWall Mounting Kit• Stainless steel material provides professional finish • Pre-drilled and ready for quick and easy mounting of water purifier • Optimizes free air circulation to cool ballast housing QUANTUM TMThermal OptimizerUsed to help regulate the water temperature insidethe purifier’s chamberThe STERALERT TM Lamp Status Alarm monitors visible light emitted through the sight port plug of the water purifier and activates an audible alarm when visible light falls below acceptable levels.• Easy installation, no tools required • Mounts on the sight port plug • Operates on a 9v battery• Monitors the visible light emitted bythe ultraviolet lamp (does not monitor the ultraviolet intensity)• Produces a high frequency tone, pulsed at two to three cycles per second• Warns of lamp or power failure • Available with Remote Sounder • Available with Dry Contact forConnection to PLC• Optional 120v 60Hz Power Adapter available• Available for use with allMIGHTY «PURE ® and SANITRON ® modelsThe SENTRY TM Safety Sensor provides constant monitoring of the waterpurifier’s ballast and germicidal lamp operation to give an indication of ballast and germicidal lamp status. The SENTRY TM Safety Sensor is capable of operating an optional audio alarm and/or solenoid valve.• Easy installation• Plug SENTRY TM into an electricaloutlet, then plug water purifier into SENTRY TM• Operates optional Solenoid Valve and/or Audio Alarm• Easily adaptable for use with other water purifier brands• Warns of lamp failure• Available for 120v 50/60Hz or 220v50/60Hz (water purifiers operating with electronic ballasts)• Available for use with most Bio-Logic ®, MINIPURE ®,MIGHTY «PURE ® and SANITRON ® modelsThe GUARDIAN TM Ultraviolet Monitor visually indicates the level of germicidal ultraviolet energy that penetrates the quartz sleeve and the water within thedisinfection chamber. The GUARDIAN TM Ultraviolet Monitor is capable of operating an optional Audio Alarm and Solenoid Valve. In addition, the GUARDIAN TMUltraviolet Monitor will detect loss of ultraviolet due to lamp outage, component or power failure. Use of the Ultraviolet Monitor is recommended by the US Public Health Service “Criteria for the Acceptability of an Ultraviolet Disinfection Unit.”The GUARDIAN TM Ultraviolet Monitor will detect reduction of ultraviolet levels due to:• Fouling or deposits on quartz sleeve. • Poor ultraviolet transmission throughthe water. (Color, turbidity, organic or other impurities in the water can reduce or interfere with the transmission of ultraviolet rays.)• Depreciation of lamp output due tousage or other cause. Lamp output gradually depreciates with use.• Lamp replacement is recommended once each year.• Available for use with all MIGHTYPURE ® and SANITRON ®models.GoodBetterBestInstant Start Germicidal Lamps Preheat Germicidal LampsGX Germicidal LampsModel S37C 12 GPMModel GallonsPerMinuteGallonsPerHourInlet andOutletReplacementLampsPowerConsumptionUnit Dimensions (Inches)LengthS17A31803/4” (19mm)NPT 05-1098-R18 Watts17-3/8(441mm)S23A63603/4” (19mm)NPT 05-1097-R 25 Watts23-3/8(594mm)*S37C127201” (25mm)NPT 05-1343-R48 Watts37-3/8(949mm)S50C201,2001-1/2” (38mm)NPT 05-1334-R65 Watts50-3/8(1280mm)*S2400C402,4002” (51mm)NPT 05-1311-R140 Watts52-1/8(1324mm)Note: When used as directed to disinfect clear water, SANITRON®Water Purifiers provide an ultraviolet dosage in excess of 30,000 microwatt seconds per square centimeter (µWSec/cm2).All inlets and outlets are male pipe threads.Total power consumption including ballast loss.Certified to NSF®/ANSI 61 & 372* compliant version available • Maximum recommended operating pressure for all purifiers is • Pressure drop at maximum recommended flow rate is less than • Flow rates are based on Maximum Concentration Levels.• 120 Volt and 220 Volt units are standard.• 12 and 24 Volt units are also available for• SANITRON® is available for operation on public power supplied throughout the world.• Consult factory with specific power requirements.• Model S2400C is available with alternate inlet/outlet fittings.Inlet and Outlet6ReplacementLampsPowerConsumption7Unit Dimensions (Inches) Shipping Data (lbs.)Length Width Height Gross Wt.2” (51mm) NPT 05-1311-R (2)280 Watts52-1/8(1324mm)17(432mm)15(381mm)116 852” (51mm) NPT 05-1311-R (4)560 Watts52-1/8(1324mm)21-1/8(537mm)34¾(883mm)2671882” (51mm) NPT 05-1311-R (6)840 Watts52-1/8(1324mm)21-1/8(537mm)53¾1365mm)4002632” (51mm) NPT 05-1311-R (8)1120 Watts52-1/8(1324mm)21-1/8(537mm)71¾(1822mm)5343962” (51mm) NPT 05-1311-R (10)1400 Watts52-1/8(1324mm)21-1/8(537mm)90¾(2305mm)670520 Shown with supplied Interconnect piping, optional GUARDIAN TM Digital UltravioletMonitors, Promate TM Solenoid Valve, SureFLO TM Flow Control Valve and customersupplied piping, union and shut-off valve.Model S5,000C83 GPMDisinfection catalog.)Note: When used as directed to disinfect clear water, SANITRON®Water Purifiers provide an ultraviolet dosage in excess of 30,000 microwatt seconds per square centimeter (µWSec/cm2).inlet and 1 outlet.• Maximum recommended operating pressure for all purifiers is 100 PSI.• Pressure drop at maximum recommended flow rate is less than 5 PSI.• Flow rates are based on Maximum Concentration Levels, shown on page 8.• 120 Volt and 220 Volt units are standard.•COMPARISON OF ATLANTIC ULTRAVIOLET WATER PURIFIERSFEATURES[S] - Standard [O] - Optional[X] - YesBio-Logic®Pure Water Pack TM1.5 GPMMINIPURE®1 to 9 GPMUltimate®4 to 9 GPMMIGHTY«PURE®3 to 20 GPMSANITRON®3 to 416 GPMMEGATRON®90 to 450 GPMChamber Material (Stainless Steel Type)316304304316316316 STER-L-RAY® GermicidalUltraviolet Lamp with 10,000 HoursRated Effective LifeS S S S S SQuick Lamp Changewith the EASY-OFF TM End Cap S S–S S S CRYSTAL CLEAR TM Quartz Sleeve S S S S S S Lamp Out Indicator Light(s)S S–––SSight Port to View Lamp Operation––S S S SDrain Fitting–––S S SDual Action Wiper Mechanism––––Manual Manualor Automatic Suggested Mount Installation Horizontal Horizontal Vertical Horizontal Horizontal Horizontal Removable or Rotatable Heads S–––S S Alternate Inlet/Outlet Fittings––––O O Sediment and Carbon Filter S–––––Promate TM Mounting Kit / Bracket S S S O O –GUARDIAN TM Ultraviolet Monitor–––O O S SENTRY TM Safety Sensor O O–O O–Promate TM Audio Alarm S S S O O–Promate TM Solenoid Valve–O–O O–SureFLO TM Flow Control Valve–O S O O–Promate TM Elapsed Time Indicator O O–O O S Promate TM Time Delay Mechanism–O–O O–Residential Use X X X X X–Commercial Use–––X X X Industrial Use––––X X Certified Models –––X X–Certified Models–––X X –SANITRON® Model S10,000C through S25,000C come equipped with mounting rack.MIGHTY«PURE® MP36C and SANITRON® S37C, S2400C, S5000C, S10,000C, S15,000C, S20,000C, and S25,000C are available as Certified.MIGHTY«PURE® MP36C and MP49C are available with NSF®/ANSI 55 for Disinfection Performance, Class B.SANITRON® Models S37C, S50C, and S2400C are certified to NSF®/ANSI 61 & 372. Model S2400C is used in modular form to build larger models.• When used as directed to disinfect clear water, Atlantic Ultraviolet Corporation® water purifiers provide an ultraviolet dosage in excessof 30,000 micro-watt seconds per square centimeter (µWSec/cm2).• This list depicts options for 120v 50/60Hz operation. Consult factory for options with other power requirements.11 • 。

液态全氟硅弹性体SIFEL

什么是信越化学的液态全氟硅弹性体SIFEL？
·全氟硅弹性体是硅端基的全氟材料。SIFEL=Silicone(有机硅)+Fluro(氟)+Elastomer(弹性体)+Liquid(液态)
化学分子构造
·以全氟聚合物为主链，两端架桥了有机硅。 ·具有全氟聚合物的耐油特性。 ·同时具有有机硅的耐腐蚀、耐低温特性。
SIFEL 好好好好好好
很贵
全氟聚醚、全氟橡胶好好不好好好好极贵
氟橡胶(低温型) 一般好不好好不好好很贵
氟硅橡胶好好不好一般不好一般贵
氟橡胶(通用型) 不好好不好好不好好一般
SIFEL与全氟材料、氟橡胶、氟硅橡胶的性能比较
液态全氟硅弹性体
物理特性
·具有良好的耐低温特性，可在-50℃的低温下长期使用。 ·具有优异的耐极性溶剂性和耐碳水化合物溶剂性。这是全氟聚醚都无法比拟的。 ·具有优异的耐油性和耐混合燃料性。 ·具有优异的抗化学品性、耐腐蚀性。 ·透湿透气性比较低。
耐低温性(-50℃) 耐热性耐极性溶剂性耐油性耐胺类物质性耐化学品性市场价格
液态全氟硅弹性体（SIFEL）
东莞市胜威化工有限公司 0769-83420215
液态全氟硅弹性体(SIFEL)
Байду номын сангаас
液态硅胶注射系统（LIMS）简介
通过把具有出色性能的液态硅橡胶，和能够精密且稳定地完成注射成型的设备相结合而形成的新型成型加工系统。只须将A/B两种液态材料装入设备内，从混合到成型全自动完成，在追求简化工艺和缩短加工时间的同时，能很方便地实现高质量制品的加工。不仅如此，利用液态硅橡胶的种特性，还能够广泛应用于以电气、电子、汽车、食品为代表的多种行业。LIMS着眼于生产能力的提高和人工费用的降低，完美体现了出色的经济效能。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Design based on customer requirements, overall structure adopting principle of high reliability, high availability, easy to use and scalability, structural design adopting principle of standardization and modularization, realizing prefabrication and quick assemble and deployment
120% 100%
80% 60% 40% 20%
0%
Traditional DC
time
1. one-time investment on cooling equipment; 2. one-time investment on power equipment 3. Large construction cost; 4. High funds vacancy rate
With the features of flexible application and scalability, MDC can ensure DC infrastructure planning according to requirement in order to guarantee the efficiency of the DC can reach peak during the life cycle
Inspur DC Total Solution
May, 2015
Content
1. DC System Constitution 2. Micromodule DC 3. Micromodule DC Value 4. Inspur DC Products 5. Inspur DC One Stop Solution 6. Inspur DC Achievements
1. DC System Constitution
raised floor
cabling system
ceiling
Partition wall wall
doors and windows
decoration project
video surveillance
security and protection door control
2. Micromodule DC
air distribution
fire fighting
power supply and distribution
intelligent integrated management platform
End cooling lighting
wiring
Infrastructure of Productization DC
response • PUE real-time/interval calculation • Reliable right control
3. Micromodule DC Value
Quick deployment, easy to use—implementation cycle reduce from months to weeks
120% 100%
80% 60% 40% 20%
TRD IDC implementation
raised flooring, complex lighting
Strong and weak current to each
cabinet
V.S
MDC implementation
conductive flooring , simple lighting
Specifically speaking, latest Inspur MDC can increase power supply and cooling by 25%, also reduce the occupied space by 15%, total cost reduced by15%
automatic alarm
power distribution
system
UPS PDC
lighting
lightning protection
1. DC System Constitution
DC computer room construction includes: DC computer room classification and performance requirement, computer room site selection and equipment layout, environmental requirement, architecture and structure, air conditioning, electrical technology, electromagnetic shielding, wiring, monitoring and security protection, water supply and drainage, fire-fighting technology
Combining with cold and hot aisle sealing technology will greatly increases the efficiency of cooling equipment
2.1 2.0
1.6
1.5
Traditional DC
High- Air-condition Sealed hot
Adopting modular structure, that is, no need to design a larger physical scale in early stage. In contrary, the DC scale can expand according to requirements
Heat-Close cooling can realize higher refrigerating efficiency; adopting air condition with horizontal air supply mode can eliminate effectively the hotspot caused by high density computing and realize highest availability;
3. Micromodule DC Value
Modular design from subsystem to overall structure, integrating various energy-saving technologies, effectively reducing PUE, realizing green energy saving
Cooling
technology
3. Micromodule DC ValБайду номын сангаасe
Traditional DC
MDC
total construction period: 6-12 months
OK
02
equipment installation: 3~6 months
01
Decoration cycle: 3~6 months
Inspur MDC intelligent integrated management platform
• Dynamic monitoring/alarm • Server running status monitoring • Power supply on-off cooperative
response • air-condition/server cooperative
high reliability: high-efficient cooling among cabinets
high adaptability: adaptable to various pipes
structural system module
high reliability: high loadbearing, good cooling high adaptability: field assembly, rich accessory
monitoring system
Computer room integrated engineering
Cooling system
precision air conditioner
new wind machine
leakage monitoring
gang control
fire fighting system
Computer equipment
PD system
monitoring system cabling system
Cooling system fire fighting system
infrastructure
As core of DC, the development of computer equipment decides that of DC; also the future application requirement idea guides the development direction of DC
Monitoring system module
high reliability: monitor equipment running and environment high adaptability: unified management inside and outside