ORION_MB_PV3_0516

合集下载

蓝牙模块AT指令集

默认值：1
绑定地址时：对于从设备, 如果已经记忆地址，则不能被查询和配对，只能被它记忆的设备连接；对于主设备，如果已经记忆地址，则一直试着连接它记忆的设备；所以当绑定地
址时，一旦设备记忆了地址，则连接只能在它与它记忆的设备之间建立，而不会与其它设备
建立连接。所以，在绑定地址时，如果希望与其它设备建立连接，则必须清除记忆的地址。
2.ERROR=<Error_Code>—— 3---4800
失败
4---9600
5---19200
6---38400
7---57600
8---115200
9---230400
A---460800
B---921600
C---1382400
默认：4---9600
注意：波特率更改以后，如果不是默认的 9600，在以后参数设置或进行数据通信时，需使用所设置的波特率。
Page 6 of 20
博陆科电子BLK-MD-BC04-B蓝牙模块AT指令集
+BIND=11:22:33:44:55:66 OK
下行命令 16：清除记忆地址
下行命令
应答
参数
AT+CLEAR
OK
无
当两个蓝牙模块匹配成功后，会记住对方的蓝牙地址，本命令用于清除记忆的蓝牙地址
码(非绑定模式)，或者绑定的蓝牙地址码(绑定模式)。
AT
Check if the command terminal work normally
AT+RESET
Software reboot
……
……
下行命令 4：查询/设置——名称
下行命令
应答
AT+NAME

M0516系列中文资料及引脚功能

5.3 管脚描述........................................................................................................................ 11
6
DC 电气特性.............................................................................................................................. 14
5.1 QFN 33 pin...................................................................................................................... 9
5.2 LQFP 48 pin.................................................................................................................. 10
支持串行调试（SWD）接口，2 个观察点/4 断点。
z 内建一组 LDO支持宽工作电压范围：2.5V~5.5V
z 存储器 32KB/64KB Flash用于存储程序代码(APROM)
4KB Flash用于存储数据(DataFlash)
7
AC 电气特性 .............................................................................................................................. 17

A10 datasheet_

A10 DatasheetV1.002011-8-221.IntroductionWith ARM Cortex A8 core, A10 will drive SoC into a brand new era of connected Smart HD which can enhance the application of connected HD SOC as well as user experiences of consumer electronics like multimedia products. Due to its outstanding connected HD video performance and cost efficiency, the highly integrated A10 is target at cool HD pad which can bring end-users better experiences of surfing, watching, gaming and reading.The A10 is dedicated to furthering the development of connected HD video CODEC application, and 1080P H.264 high profile encoding technology can become one of the benchmarks. Besides its remarkable super HD 2160p video decoding capability, A10 can stream smoothly HD video over internet, including FLASH10.3/HTML5/3RD APK.Besides self-developed display acceleration frame, MALI400 2D/3D GPU has also been introduced to strengthen the connected smart HD SOC in terms of high profile display so that it can support popular smart systems such as Android2.3/3.0 better and improve the performance of Android-loaded products as well as user experience.There is no doubt that low power consumption and excellent user experience will be always on the top of end-users’ wish list. A10 has adoped Allwinnertech’s most advanced technology of video CODEC and power consumption is much lower during 1080p decoding process. What’s more, Allwinnertech will keep applying progressive VLSI design under new process so that end products can become even more competitive with shorter R&D cycle and easier production advantages.2.FeatureCPU●ARM Cortex-A8 Core●32KB I-Cache/32KB D-Cache/256K L2 Cache●Using NEON for video, audio,and graphic workloads eases the burden of supporting moredelicated accelerators across the SoC and enable the system to support the standards oftomorrow●RCT JA V A-Accelerations to optimize just in time(JIT) and dynamitic adaptivecompilation(DAC), and reduces memory footprint up to three times●Trustzone technology allows for secure transactions and digital right managements(DRM)GPU3D●support Open GL ES 2.0 / open VG 1.12D●support BLT / ROP2/3/4●Rotation 90/180/270 degree●Mirror / alpha (including plane and pixel alpha) / color key support●Scaling function with 4*4 taps and 32 phase●Support format conversionVPU●Video Decoding (Super HD 2160P)Support all popular video formats, including VP8,A VS, H.264, H.263,VC-1, MPEG-1/2/4Support 1920*1080@60fps in all formats●Video EncodingSupport encoding in H.264 High Profile format1080p@60fps720p @100fpsDisplay Processing Ability●Four moveable and size-adjustable layers●Support 8 tap scale filter in horizontal and 4 tap in vertical direction for scaling●support Multi-format image input●support Alpha blending / color key / gamma●support Hardware cursor / sprite●support Vertical keystone correction●support Output color correction (luminance / hue / saturation etc)●support motion adaptive de-interlace●support Video enhancement●support 3D format content input/output format convert/display (including HDMI)Display Output Ability●Support HDMI V1.3/V1.4●Flexible LCD interface (CPU / Sync RGB / LVDS) up to 1920*1080 resolution●CVBS / YPbPr up to 1920*1080 resolutionImageInput Ability●Dual camera sensor interface (CSI0 supports ISP function)Memory●16/32-bits SDRAM controllersupport DDR2 SDRAM and DDR3 SDRAM up to 800MbpsMemory Capacity up to 16 G-bits●8-bits NAND Flash Controller with 8 chip select and 2 r/b signalsSupport SLC/MLC/TLC/DDR NANDECC up to 64bitPeripherals● 1 USB 2.0 OTG controller for general application/2 USB2.0 EHCI Controller for HOSTapplication● 4 high-speed Memory controller supports SD version 3.0 and MMC version 4.2●8 UARTs with 64 Bytes TX FIFO and 64 Bytes RX FIFO,1 UART with full modem function2 UARTs with RTS/CTS hardware flow control5 UARTs with two wires● 4 SPI controller1 dedicated SPI controller for serial NOR Flash boot application3 SPI for general applications● 3 Two-Wire Interfaces up to 400Kbps●Key Matrix (8x8) with internal debounce filter●IR controller supports MIR, FIR and IR remoter●2-CH 6-bits LRADC for line control●Internal 4-wire touch panel controller with pressure sensor and 2-point touch●I2S/PCM controller for 8-channel output and 2-channel input●AC97 controller compatible with AC97 version 2.3 standard●Internal 24-bits Audio Codec for 2 channel headphone, 2 channel microphone, 2 channel FMinput and Line input● 2 PWM controllerSystem●8 channel normal DMA and 8 channel dedicateed DMA●Internal (32K+64K) SRAM on chip● 4 timer, 1 RTC timer and 1 watchdogSecurity●Security SystemSupport DES, 3DES, AES encryption and decryption.messagedigestSHA-1,MD5SupportSupport hardware 64-bit random generator●128-bits EFUSE chip IDPackage●TFBGA441package●0.8mm pitch3.Functional Block DiagramDisplayHead PhoneMicrophoneAC AdapterPowerManagementPMU System PowerPlug AC LineSupport 4.1V/4.2V/4.36V USB1,2 HOSTUSB0 OGTUSB1,2 ControllerUSB0 Controller Display3G4.Pin Assignments4.1.DimensionFigure 4-1 A10 TFBGA441 Package Dimension4.2.Pin MapThe following pin maps show the top view of the 441-pin FBGA package pin assignments in fourquadrants (A, B, C, D).Figure 4-2 TFBGA441 Pin Map-Top View [Quadrant A]Figure 4-3 TFBGA441 Pin Map-Top View [Quadrant B]Figure 4-4 TFBGA441 Pin Map-Top View [Quadrant C]Figure 4-5 TFBGA441Pin Map-Top View [Quadrant D]5.Pin Description5.1.Pin Characteristics1.BALL#: Ball numbers on the bottom side associated with each signals on the bottom.2.Pin Name: Names of signals multiplexed on each ball (also notice that the name of the pin is thesignal name in function 0).3.Function: Multiplexing function number.Function 0 is the the default function, but is not necessarily the primary mode.Functions 1 to 5 are possible modes for alternate functions.4.Type: signal direction-I =Input-O =Output-I/O =Input/Output- A = Analog-AIO =Analog Input/Output-PWR =Power-GND =Ground5.Pin Reset State: The state of the terminal at reset (power up).-0: The buffer drives VOL(pull down/pull up resistor not activated)-0 (PD): The buffer drives V OL with an active pull down resistor.-1: The buffer drives VOH (pull down/pull up resistor not activated).- 1 (PU): The buffer drives V OH with an active pull up resistor.-Z: High-impedance-L: High-impedance with an active pull down resistor.-H: High-impedance with an active pull up resistor.6.Pull Up/Down: Denotes the presence of an internal pull up or pull down resister. Pull up and pulldown resistor can be enabled or disabled via software.7.Buffer Strength: Drive strength of the associated output buffer.Table 5-1 Pin Characteristics (FBGA441)Table 5-1BALL# Pin Name Function Type ResetStatePullUp/DownBufferStrength(mA)AB4 SDQ0 I/O AC7 SDQ1 I/OAC4 SDQ2 I/OAB8 SDQ3 I/OAC8 SDQ4 I/OAB5 SDQ5 I/OAB7 SDQ6 I/OBALL# Pin Name Function Type ResetStatePullUp/DownBufferStrength(m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in Name Function TypeState Up/Down Strength (mA)V2 SCK# OV1 SCK OJ4 SCKE1 ON3 SCKE0 O W4 SA0 OR4 SA1 OU4 SA2 OM4 SA3 OY4 SA4 ON5 SA5 OV4 SA6 OM3 SA7 OAA3 SA8 OP4 SA9 OL3 SA10 OW3 SA11 OP3 SA12 OY3 SA13 OR3 SA14 OK3 SBA0 OL4 SBA1 OK4 SBA2 OT3 SWE OU3 SCAS OT4 SRAS OV3 SCS0 OAA4 SCS1 O AA5 SDOT0 OJ3 SDOT1 O AA7 SZQAA6 SRST O N8/P8/R8 NCM8/N9/P9 VDD_DLL P M9/N10/P10 GND_DLL PPA0 0/1I/OERXD3 2SPI1_CS0 3D5UART2_RTS 4PA1 0/1I/OERXD2 2E5BALL# Pin Name Function TypeState Up/Down Strength (mA)UART2_CTS 4PA2 0/1I/OERXD1 2SPI1_MOSI 3D6UART2_TX 4PA3 0/1I/OERXD0 2SPI1_MISO 3E6UART2_RX 4PA4 0/1I/OETXD3 2D7SPI1_CS1 3PA5 0/1I/OETXD2 2E7SPI3_CS0 3PA6 0/1I/OETXD1 2D8SPI3_CLK 3PA7 0/1I/OETXD0 2E8SPI3_MOSI 3PA8 0/1I/OERXCK 2D9SPI3_MISO 3PA9 0/1I/OERXERR 2E9SPI3_CS1 3PA10 0/1I/OERXDV 2D10UART1_TX 4PA11 0/1I/OEMDC 2E10UART1_RX 4PA12 0/1I/OEMDIO 2UART6_TX 3D11UART1_RST 4PA13 0/1I/OETXEN 2UART6_RX 3E11BALL# Pin Name Function TypeState Up/Down Strength (mA)PA14 0/1I/OETXCK 2UART7_TX 3D12UART1_DTR 4PA15 0/1I/OECRS 2UART7_RX 3E12UART1_DSR 4PA16 0/1I/OECOL 2CAN_TX 3D13UART1_DCD 4PA17 0/1I/OETXERR 2CAN_RX 3C13UART1_RING 4PB0 0/1I/O A15TWI0_SCK 2PB1 0/1I/O B15TWI0_SDA 2PB2 0/1I/O A14PWM0 2PB3 0/1I/OIR_TX 2NC 3B14EINT16 5PB4 0/1I/O A13IR_RX 2PB5 0/1I/OI2S_MCLK 2B13AC97_MCLK 3PB6 0/1I/OI2S_BCLK 2A12AC97_BCLK 3PB7 0/1I/OI2S_LRCK 2B12AC97_SYNC 3PB8 0/1I/OI2S_DO0 2A11AC97_DO 3BALL# Pin Name Function TypeState Up/Down Strength (mA)I2S_DO1 2PB10 0/1I/O C11I2S_DO2 1PB11 0/1I/O C10I2S_DO3 1PB12 0/1I/OI2S_DI 2AC97_DI 3C9NC 4PB13 0/1I/OSPI2_CS1 2B11NC 4PB14 0/1I/OSPI2_CS0 2A10JTAG_MS0 3PB15 0/1I/OSPI2_CLK 2B10JTAG_CK0 3PB16 0/1I/OSPI2_MOSI 2A9JTAG_DO0 3PB17 0/1I/OSPI2_MOSO 2B9JTAG_DI0 3PB18 0/1I/O A8TWI1_SCK 2PB19 0/1I/O B8TWI1_SDA 2PB20 0/1I/O C8TWI2_SCK 2PB21 0/1I/O C7TWI2_SDA 2PB22 0/1I/OUART0_TX 2A7IR1_TX 3PB23 0/1I/OUART0_RX 2B7IR1_RX 3PC0 0/1I/ONWE# 2M23BALL# Pin Name Function TypeState Up/Down Strength (mA)PC1 0/1I/ONALE 2M22SPI0_MISO 3PC2 0/1I/ONCLE 2L23SPI0_CLK 3PC3 0/1I/ONCE1 2L22SDC1_CMD 3 Pull Up (default)PC4 0/1I/O K23NCE0 1 Pull Up (default)PC5 0/1I/ONRD 1K22SDC1_CLK 2PC6 0/1I/ONRB0 2J23SDC2_CMD 3 Pull Up (default)PC7 0/1I/ONRB1 2J22SDC2_CLK 3 Pull Up (default)PC8 0/1I/OND0 2H23SDC2_D0 3PC9 0/1I/OND1 2H22SDC2_D1 3PC10 0/1I/OND2 2G23SDC2_D2 3PC11 0/1I/OND3 2G22SDC2_D3 3PC12 0/1I/OND4 2H21SDC1_D0 3PC13 0/1I/OND5 2H20SDC1_D1 3PC14 0/1I/OND6 2G21BALL# Pin Name Function TypeState Up/Down Strength (mA)PC15 0/1I/OND7 2G20SDC1_D3 3PC16 0/1I/O M21NWP 1 Pull Down (default)PC17 0/1I/O F23NCE2 1 Pull Up (default)PC18 0/1I/O F22NCE3 1 Pull Up (default)PC19 0/1I/ONCE4 1SPI2_CS0 2L21EINT12 5PC20 0/1I/ONCE5 1SPI2_CLK 2K21EINT13 5PC21 0/1I/ONCE6 1SPI2_MOSI 2J21EINT14 5PC22 0/1I/ONCE7 1SPI2_MISO 2J20EINT15 5PC23 0/1I/O G19SPI0_CS0 2 Pull Up (default)PC24 0/1I/O F21NDQSPD0 0/1I/OLCD0_D0 2AB15LVDS0_VP0 3PD1 0/1I/OLCD0_D1 2AC15LVDS0_VN0 3PD2 0/1I/OLCD0_D2 2AB14LVDS0_VP1 3PD3 0/1I/OLCD0_D3 2AC14BALL# Pin Name Function TypeState Up/Down Strength (mA)PD4 0/1I/OLCD0_D4 2AB13LVDS0_VP2 3PD5 0/1I/OLCD0_D5 2AC13LVDS0_VN2 3PD6 0/1I/OLCD0_D6 2AB12LVDS0_VPC 3PD7 0/1I/OLCD0_D7 2AC12LVDS0_VNC 3PD8 0/1I/OLCD0_D8 2AB11LVDS0_VP3 3PD9 0/1I/OLCD0_D9 2AC11LVDS0_VN3 3PD10 0/1I/OLCD0_D10 2Y15LVDS1_VP0 3PD11 0/1I/OLCD0_D11 2AA15LVDS1_VN0 3PD12 0/1I/OLCD0_D12 2Y14LVDS1_VP1 3PD13 0/1I/OLCD0_D13 2AA14LVDS1_VN1 3PD14 0/1I/OLCD0_D14 2Y13LVDS1_VP2 3PD15 0/1I/OLCD0_D15 2AA13LVDS1_VN2 3PD16 0/1I/OLCD0_D16 2Y12LVDS1_VPC 3PD17 0/1I/O AA12BALL# Pin Name Function TypeState Up/Down Strength (mA)LVDS1_VNC 3PD18 0/1I/OLCD0_D18 2Y11LVDS1_VP3 3PD19 0/1I/OLCD0_D19 2AA11LVDS1_VN3 3PD20 0/1I/OLCD0_D20 2Y10CSI1_MCLK 3PD21 0/1I/OLCD0_D21 2AA10SMC_VPPEN 3PD22 0/1I/OLCD0_D22 2AB10SMC_VPPPP 3PD23 0/1I/OLCD0_D23 2AC10SMC_DET 3PD24 0/1I/OLCD0_CLK 2Y9SMC_VCCEN 3PD25 0/1I/OLCD0_DE 2AA9SMC_RST 3PD26 0/1I/O LCD0_HSYNC 2AB9SMC_SLK 3PD27 0/1I/O LCD0_VSYNC 2AC9SMC_SDA 3PE0 0/1I/OTS0_CLK 2E23CSI0_PCK 3PE1 0/1I/OTS0_ERR 2E22CSI0_CK 3PE2 0/1I/OTS0_SYNC 2D23CSI0_HSYNC 3BALL# Pin Name Function TypeState Up/Down Strength (mA)TS0_DVLD 2CSI0_VSYNC 3PE4 0/1I/OTS0_D0 2C23CSI0_D0 3PE5 0/1I/OTS0_D1 2C22CSI0_D1 3PE6 0/1I/OTS0_D2 2B23CSI0_D2 3PE7 0/1I/OTS0_D3 2B22CSI0_D3 3PE8 0/1I/OTS0_D4 2A23CSI0_D4 3PE9 0/1I/OTS0_D5 2A22CSI0_D5 3PE10 0/1I/OTS0_D6 2B21CSI0_D6 3PE11 0/1I/OTS0_D7 2A21CSI0_D7 3PF0 0/1I/OSDC0_D1 2M20JTAG_MS1 4PF1 0/1I/OSDC0_D0 2M19JTAG_DI1 4PF2 0/1I/OSDC0_CLK 2L20UART0_TX 4PF3 0/1I/OSDC0_CMD 2L19JTAG_DO1 4PF4 0/1I/OSDC0_D3 2K20BALL# Pin Name Function TypeState Up/Down Strength (mA)PF5 0/1I/OSDC0_D2 2K19JTAG_CK1 4PG0 0/1I/OTS1_CLK 2CSI1_PCLK 3F20SDC1_CMD 4PG1 0/1I/OTS1_ERR 2CSI1_MLCK 3E21SDC1_CLK 4PG2 0/1I/OTS1_SYNC 2CSI1_HSYNC 3E20SDC1_D0 4PG3 0/1I/OTS1_DVLD 2CSI1_VSYNC 3D21SDC1_D1 4PG4 0/1I/OTS1_D0 2CSI1_D0 3SDC1_D2 4D20CSI0_D8 5PG5 0/1I/OTS1_D1 2CSI1_D1 3SDC1_D3 4C21CSI0_D9 5PG6 0/1I/OTS1_D2 2CSI1_D2 3UART3_TX 4E19CSI0_D10 5PG7 0/1I/OTS1_D3 2CSI1_D3 3UART3_RX 4C20CSI0_D11 5PG8 0/1I/O D19BALL# Pin Name Function TypeState Up/Down Strength (mA)CSI1_D4 3UART3_RTS 4CSI0_D12 5PG9 0/1I/OTS1_D5 2CSI1_D5 3C19UART3_CTS CSI0_D134 5PG10 0/1I/OTS1_D6 2CSI1_D6 3UART4_TX 4D18CSI0_D14 5PG11 0/1I/OTS1_D7 2CSI1_D7 3UART4_RX 4C18CSI0_D15 5PH0 0/1I/OLCD1_D0 2ATAA0 3UART3_TX 4EINT0 6A6CSI1_D07PH1 0/1I/OLCD1_D1 2ATAA1 3UART3_RX 4EINT1 6B6CSI1_D17PH2 0/1I/OLCD1_D2 2ATAA2 3UART3_RTS 4EINT2 6C6CSI1_D27PH3 0/1I/OLCD1_D3 2ATAIRQ 3UART3_CTS 4A5EINT3 6BALL# Pin Name Function TypeState Up/Down Strength (mA)CSI1_D37PH4 0/1I/OLCD1_D4 1ATAD0 2UART4_TX 3EINT4B5CSI1_D4PH5 0/1I/OLCD1_D5 2ATAD1 3UART4_RX 4EINT5 6C5CSI1_D57PH6 0/1I/OLCD1_D6 2ATAD2 3UART5_TX 4MS_BS 5EINT6 6A4CSI1_D67PH7 0/1I/OLCD1_D7 2ATAD3 3UART5_RX 4MS_CLK 5EINT7 6B4CSI1_D77PH8 0/1I/OLCD1_D8 2ATAD4 3KP_IN0 4MS_D0 5EINT8 6C4CSI1_D87PH9 0/1I/OLCD1_D9 2ATAD5 3KP_IN1 4MS_D1 5EINT9 6D4CSI1_D97BALL# Pin Name Function TypeState Up/Down Strength (mA)PH10 0/1I/OLCD1_D10 2ATAD6 3KP_IN2 4MS_D2 5EINT10 6A3CSI1_D107PH11 0/1I/OLCD1_D11 2ATAD7 3KP_IN3 4MS_D3 5EINT11 6CSI1_D117B3PH12 0/1I/OLCD1_D12 2ATAD8 3PS2_SCK1 4EINT12 6C3CSI1_D127PH13 0/1I/OLCD1_D13 2ATAD9 3PS2_SDA1 4SMC_RST 5EINT13 6A2CSI1_D137PH14 0/1I/OLCD1_D14 2ATAD10 3PS2_KP_IN4 4SMC_VPPEN 5EINT14 6B2CSI1_D147PH15 0/1I/OLCD1_D15 2ATAD11 3KP_IN5 4SMC_VPPPP 5A1EINT15 6BALL# Pin Name Function TypeState Up/Down Strength (mA)CSI1_D157PH16 0/1I/OLCD1_D16 2ATAD12 3KP_IN6 4SMC_DET 5EINT16 6B1CSI1_D167PH17 0/1I/OLCD1_D17 2ATAD13 3KP_IN7 4SMC_VCCEN 5EINT17 6C1CSI1_D177PH18 0/1I/OLCD1_D18 2ATAD14 3KP_OUT0 4SMC_SLK 5EINT18 6C2CSI1_D187PH19 0/1I/OLCD1_D19 2ATAD15 3KP_OUT1 4SMC_SDA 5EINT19 6D1CSI1_D197PH20 0/1I/OLCD1_D20 2ATAOE 3CAN_TX 4EINT20 6D2CSI1_D207PH21 0/1I/OLCD1_D21 2ATADREQ 3CAN_RX 4EINT21 6D3CSI1_D217BALL# Pin Name Function TypeState Up/Down Strength (mA)PH22 0/1I/OLCD1_D22 2ATADACK 3KP_OUT2 4CSI1_D225E2SDC1_CMD7PH23 0/1I/OLCD1_D23 2ATACS0 3KP_OUT3 4SDC1_CLK5E3CSI1_D237PH24 0/1I/OLCD1_CLK 2ATACS1 3KP_OUT4 4SDC1_D05E3CSI1_PCLK7PH25 0/1I/OLCD1_DE 2ATAIORDY 3KP_OUT5 4SDC1_D15E4CSI1_FIELD7PH26 0/1I/OLCD1_HSYNC 2ATAIORDY 3KP_OUT6 4SDC1_D25F3CSI1_HSYNC7PH27 0/1I/OLCD1_VSYNC 2ATAIOW 3KP_OUT7 4SDC1_D35F4CSI1_VSYNC7PI0 0/1I/OA20NC 2PI1 0/1I/OB20NC 2A19 PI20/1I/OBALL# Pin Name Function TypeState Up/Down Strength (mA)NC 2PI3 0/1I/O B19PWM1 2PI4 0/1I/O A18SDC3_CMD 2PI5 0/1I/O B18SDC3_CLK 2PI6 0/1I/O A17SDC3_D0 2PI7 0/1I/O B17SDC3_D1 2PI8 0/1I/O A16SDC3_D2 2PI9 0/1I/O B16SDC3_D3 2PI10 0/1I/OSPI0_CS0 2UART5_TX 3C17EINT22 6PI11 0/1I/OSPI0_CLK UART5_RX 2 3D17EINT23 6PI12 0/1I/OSPI0_MOSI 2UART6_TX 3C16EINT2 6PI13 0/1 I/OSPI0_MISO 2UART6_RX 3D16EINT25 6PI14 0/1 I/OSPI0_CS1 2PS2_SCK1 3TCLKIN0 4A18EINT26 6PI15 0/1 I/OSPI1_CS1 2PS2_SDA1 3TCLKIN1 4B18EINT27 6BALL# Pin Name Function TypeState Up/Down Strength (mA)PI16 0/1 I/OSPI1_CS0 2UART2_RTS 3A17EINT28 6PI17 0/1 I/OSPI1_CLK 2UART2_CTS 3B17EINT29 6PI18 0/1 I/OSPI1_MOSI 2UART2_TX 3A16EINT30 6PI19 0/1 I/OSPI1_MISO 2UART2_RX 3B16EINT31 6PI20 0/1 I/OPS2_SCK0 2UART7_TX 3E14HSCL 6PI21 0/1 I/OPS2_SDA0 2UART7_RX 3E13HSDA 6NC I pull-upT9 GNDW8 UBOOT_SEL I pull-upT10 JTAG_SEL0/1I/O pull-upH16 TEST 0I/O pull-downF5 NMI#AC14 RESET# 0AN20 DM0 0/1 ION21 DP00/1 IOP20 DM10 PWR- - - P21 DP10 GND- - - L16 UVCC_C 0 PWR- - - L14 UGND_C 0 GND- - - L15 UVCC_T 0/1 PWRL13 UGND_T 0/1 GNDBALL# Pin Name Function TypeState Up/Down Strength (mA)K16 ULVDD PWRK14 ULGND GNDR20 DM2 IOR21 DP2 IOY22 XP_TP 0AIAA22 XN_TP 0AIY23 YP_TP 0AIAA23 YN_TP 0AIAC23 MIC1OUTN 0AC22 MIC1OUTP 0Y21 FMINR0Y20 FMINL0AA21 VMIC0 - -AC21 MICIN20 - -AC20 MICIN10 - -W20 VRA10V20 VRA20T19 A VCC 0W21 VRP0AB21 LINEINR0 - -AB20 LINEINL0U19 AGND 0W19 HPR 0Y19 HPL 0V19 HPGND 0AA20 HPCOMFB 0AC19 HPVCC 0Y19 HPL 0AB23 LRADC0 0AIAB22 LRADC1 0AIAC16 TVOUT0 0AOAB16 TVOUT1 0AOAC17 TVOUT2 0AOAB17 TVOUT3 0AOW15 VCC33_TVOUT0 PWR- - - W18 GND33_TVOUT0 GND- - - AC18 NC 0AB18 NC0AA17 NC0Y17 NC0W16 NC 0BALL# Pin Name Function TypeState Up/Down Strength (mA)Y18 NC 0W17 NC 0AA18 NC 0AA16 NC 0Y16 NC 0V23 TX0P_HDMI 0V22 TX0N_HDMI0U23 TX1P_HDMI0U22 TX1N_HDMI0T23 TX2P_HDMI0T22 TX2N_HDMI0W23 TXCP_HDMI0W22 TXCN_HDMI0T13 VP_HMDI 0P13/R13/P14 GND_HDMI 0R23 SCL_HDMI 0R22 SDA_HDMI0P22 HPD_HDMI0P23 CEC_HDMI0R14/T14 NCT20 NC0T21 NC0U21 NC0U20 NC0V21 NC0P19/R19 NC0M16/M15 NC0N15/N16 NC 0M14/N13 NC 0F1 CLK32K_INAF2 CLK32K_OUT0 AK8 RTC_VDDPWR-- - N23 CLK24M_IN 0 AN22 CLK24M_OUT 0 AR16/T16/R15/T15 NC0 PWR- - - P16 PLLVP25 0P15 PLLGND 0GND-- - H8/H9/H10J8/J9/J10 J14/H15 VCC(8) 0PWR- - -BALL# Pin Name Function TypeState Up/Down Strength (mA)N19 VCC_CARD 0PWR- - - H19/J19 VCC_NAND(2) 0 PWR- - -G5/H5/L5/M5/R5/T5/W5/W6/W7/Y7/ VCC_ DRAM(10)0 PWR- - -J5/k5/N5/P5/U5/V5/Y7/Y8/G3/G4GND_DRAM (10)0 GND- - - L8/L9/K9/K10/T8/R9/R10/ K15/J15/J16 VDD(10) 0PWR- - -J12/J13/H11/H12/H13/H14VDD2（6）H11/H12/H13/H14J12/J14VDDCPU(6) T8/R9/R10L8/L9/K9/K10K15/J15/J16VDD_INT(10)L10/L11/L12/K11/K12/K13/J11/M10/M11/M12/M13/N11/N12/ P11/P12/R11/R12/T11/T12 GND(19) 0GND- -W12/W13/W14 VCC_ LVDS (3) 0 PWR- - -W9/W10/W11 GND_LVDS(3) 0 GND- - -F19 VCC_CSI0E18 VCC_CSI1。

Allwinner R8 Datasheet

REVISION HISTORYDECLARATIONTABLE OF CONTENTS5.3. DC Electrical Characteristics2.6.Memory Subsystem&Touch G-SENSORSPI1_CLK UART3_RX42 DDR3_D743 VCC3_DRAM79 AGND80 VRPSDC0_CMD 111PF3PE9 CSI_D6LCD_D10 141PD10PC19 163 VCC4function 0);3)Type: signal directionPC7 Input PC8 InputPE4 Input PE5 InputSignal Name DescriptionOthersVRP Reference voltageV IH High-Level Input Voltage V IL Low-Level Input VoltageFigure 5-1. Power Up Sequence5.5.2.Power Up Reset Sequence RequirementsThe device has a system reset signal to reset the board. When asserted, the following steps give an example of power up reset sequence supported by the R8 device.•AVCC ,VDD_CPU and VCC_DRAM can be powered up simultaneously.•VDD_INT can be powered up after VDD_CPU is powered up, the time difference is T1ms.•VCC can be powered up after VDD_INT is powered up, the time difference is T2ms.Figure 5-2. Power Up Reset Sequence5.5.3.Resume Power Up Sequence from Super Standby ModeTo resume a power up sequence when the device is in Super Standby mode:•VCC_DRAM and AVCC remains powered up always.•VDD_CPU can be powered up firstly.•VDD_INT can be powered up after VDD_CPU is powered up, the time difference is T1ms.•VCC can be powered up after VDD_INT is powered up, the time difference is T2ms.Figure 5-3. Exit Super Standby and Resume Power Up Sequence5.5.4.Power Down Sequence RequirementsTo reduce power consumption,the R8 can be partially powered down.The section lists the power down requirements in each mode.In Super Standby mode,•VCC_DRAM and AVCC must be kept powered up.•VDD_CPU,VDD_INT and VCC are powered down simultaneously.•VCC voltage fall time is more longer than VDD_INT.VDD_CPUVDD_CPU6.PIN ASSIGNMENT6.2.PACKAGE DIMENSIONThe following diagram shows the package dimension of R8.。

华为所有型号交换机查看序列号方法

issuenumbercleicodebomport26archivesinfo版本archivesinfoversion30美元董事会属性boardtype条形码项描述制造vendornameissuenumbercleicodebomport27archivesinfo版本archivesinfoversion30美元董事会属性boardtype条形码项描述制造vendornameissuenumbercleicodebomport28archivesinfo版本archivesinfoversion30美元董事会属性boardtypebarcodetheitemdescriptionmanufacturedvendornameissuenumbercleicodebomthes6500deviceusesthefollowingcommandtoviewtheserialnumberofthemaincontrolboardandthebusinessboardsoftwareversion
2、自研的S23/S33/S53/63/93/S27/S37/S57/67/77/97系列交换机使用命令：display elable
<TH_NongGongSHang_S3328>dis elabel
/$[System Integration Version]
/$SystemIntegrationVersion=3.0
***********************************************************************
*Manufacturing Information
*Product SN:036981A05C000036

浪潮服务器商品编码部件产品名称 Q1对应编码 Q1对应配件名称

商品编码部件产品名称Q1对应编码Q1对应配件名称CPUSPT0CPU0002H Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4809v2(6C,105W,1.9GHz)Processor Option Kit BCX305XeonE7-4809v2(1.9GHz/6c)/6.4GT/12ML3 SPT0CPU0002I Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4820v2(8C,105W,2.0GHz)Processor Option Kit BCX306XeonE7-4820v2(2.00GHz/8c)/7.2GT/16ML3 SPT0CPU0002J Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4830v2(10C,105W,2.2GHz)Processor Option Kit BCX307XeonE7-4830v2(2.2GHz/10c)/7.2GT/20ML3 SPT0CPU0002K Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4850v2(12C,105W,2.4GHz)Processor Option Kit BCX308XeonE7-4850v2(2.3GHz/12c)/7.2GT/24ML3 SPT0CPU0002L Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4860v2(12C,130W,2.6GHz)Processor Option Kit BCX309XeonE7-4860v2(2.6GHz/12c)/8.0GT/30ML3 SPT0CPU0002M Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4870v2(15C,130W,2.3GHz)Processor Option Kit BCX310XeonE7-4870v2(2.3GHz/15c)/8.0GT/30ML3 SPT0CPU0002N Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4880v2(15C,130W,2.5GHz)Processor Option Kit BCX311XeonE7-4880v2(2.5GHz/15c)/8.0GT/37.5ML3 SPT0CPU0002O Inspur NF8460M3,NF8465M3Inbbb Xeon E7-4890v2(15C,155W,2.8GHz)Processor Option Kit BCX312XeonE7-4890v2(2.8GHz/15c)/8.0GT/37.5ML3 SPT0CPU0002P Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8857v2(12C,130W,3.0GHz)Processor Option Kit XeonE7-8857v2-Xeon3_8.0G_30M_12CSPT0CPU0002Q Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8850v2(12C,105W,3.0GHz)Processor Option Kit BCX437XeonE7-8850v2-Xeon2.3_7.2G_24M_12C SPT0CPU0002R Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8870v2(15C,130w,2.3GHz)Processor Option Kit XeonE7-8870v2-Xeon2.3_8.0G_30M_15CSPT0CPU0002S Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8891v2(10C,155W,3.2GHz)Processor Option Kit XeonE7-8891v2-Xeon3.2_8G_37.5M_10CSPT0CPU0002T Inspur NF8460M3,NF8465M3Inbbb Xeon E7-8893v2(6C,155W,3.4GHz)Processor Option Kit XeonE7-8893v2-Xeon3.4_8G_37.5M_6CSPT0CPU0002U Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4809v3(8C,115W,2.0GHz)Processor Option Kit BCX377XeonE7-4809v3(2.0GHz/8c)/6.4GT/20ML3 SPT0CPU0002V Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4820v3(10C,115W,1.9GHz)Processor Option Kit BCX376XeonE7-4820v3(1.9GHz/10c)/6.4GT/25ML3 SPT0CPU0002W Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4830v3(12C,115W,2.1GHz)Processor Option Kit BCX375XeonE7-4830v3(2.1GHz/12c)/8.0GT/30ML3 SPT0CPU0002X Inspur NF8460M4,NF8465M4Inbbb Xeon E7-4850v3(14C,115W,2.2GHz)Processor Option Kit BCX374XeonE7-4850v3(2.2GHz/14c)/8.0GT/35ML3 SPT0CPU0002Y Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8860v3(16C,140W,2.2GHz)Processor Option Kit BCX373XeonE7-8860v3(2.2GHz/16c)/9.6GT/40ML3 SPT0CPU00030Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8870v3(18C,140W,2.1GHz)Processor Option Kit BCX372XeonE7-8870v3(2.1GHz/18c)/9.6GT/45ML3 SPT0CPU00032Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8880v3(18C,150W,2.3GHz)Processor Option Kit BCX371XeonE7-8880v3(2.3GHz/18c)/9.6GT/45ML3 SPT0CPU00033Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8890v3(18C,165W,2.5GHz)Processor Option Kit BCX370XeonE7-8890v3(2.5GHz/18c)/9.6GT/45ML3 SPT0CPU0002Z Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8867v3(16C,165W,2.5GHz)Processor Option Kit BCX369XeonE7-8867v3(2.5GHz/16c)/9.6GT45ML3 SPT0CPU00034Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8891v3(10C,165W,2.8GHz)Processor Option Kit BCX368XeonE7-8891v3(2.8GHZ/10c)/9.6GT/45ML3 SPT0CPU00035Inspur NF8460M4,NF8465M4Inbbb Xeon E7-8893v3(4C,140W,3.2GHz)Processor Option Kit BCX367XeonE7-8893v3(3.2GHz/4c)/9.6GT/45ML3 SPT0CPU00003Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2609v3(6C,85W,1.9GHz)Processor Option Kit BCX323E5-2609v3(1.9GHz/6c)/6.4GT/15ML3SPT0CPU00004Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2620v3(6C,85W,2.4GHz)Processor Option Kit BCX324E5-2620v3(2.4GHz/6c)/8GT/15ML3SPT0CPU00005Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2630v3(8C,85W,2.4GHz)Processor Option Kit BCX325E5-2630v3(2.4GHz/8c)/8GT/20ML3SPT0CPU00006Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2637v3(4C,135W,3.5GHz)Processor Option Kit E5-2637v3(3.5GHz/4c)/9.6GT/15ML3SPT0CPU00007Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2640v3(8C,90W,2.6GHz)Processor Option Kit BCX326E5-2640v3(2.6GHz/8c)/8GT/20ML3SPT0CPU00008Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2643v3(6C,135W,3.4GHz)Processor Option Kit BCX339E5-2643v3(3.4GHz/6c)/9.6GT/20ML3SPT0CPU00009Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2650v3(10C,105W,2.3GHz)Processor Option Kit BCX327E5-2650v3(2.3GHz/10c)9.6GT/25ML3SPT0CPU00010Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2660v3(10C,105W,2.6GHz)Processor Option Kit BCX328E5-2660v3(2.6GHz/10c)9.6GT/25ML3 SPT0CPU00011Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2667v3(8C,135W,3.2GHz)Processor Option Kit E5-2667v3(3.2GHz/8c)9.6GT/20ML3SPT0CPU00012Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2670v3(12C,120W,2.3GHz)Processor Option Kit BCX329E5-2670v3(2.3GHz/12c)9.6GT/30ML3 SPT0CPU00013Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2680v3(12C,120W,2.5GHz)Processor Option Kit BCX330E5-2680v3(2.5GHz/12c)9.6GT/30ML3 SPT0CPU00015Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2690v3(12C,135W,2.6GHz)Processor Option Kit BCX331E5-2690v3(2.6GHz/12c)9.6GT/30ML3 SPT0CPU00016Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2695v3(14C,120W,2.3GHz)Processor Option Kit BCX333E5-2695v3(2.3GHz/14c)9.6GT/35ML3 SPT0CPU00017Inspur NF5280M4Inbbb Xeon E5-2697v3(14C,145W,2.6GHz)Processor Option Kit BCX334E5-2697v3(2.6GHz/14c)9.6GT/35ML3SPT0CPU00018Inspur NF5280M4Inbbb Xeon E5-2698v3(16C,135W,2.3GHz)Processor Option Kit BCX335E5-2698v3(2.3GHz/16c)9.6GT/40MLSPT0CPU00019Inspur NF5280M4Inbbb Xeon E5-2699v3(18C,145W,2.3GHz)Processor Option Kit E5-2699v3(2.3GHz/18c)9.6GT/45ML3SPT0CPU00014Inspur NF5280M4,NF5270M4Inbbb Xeon E5-2683v3(14C,120W,2.0GHz)Processor Option Kit E5-2683v3(2.0GHz/14C)/9.6GT/35ML3 BCX438XeonE3-1220V5(3.0GHZ)/8M/4CBCX439XeonE3-1230V5(3.40GHZ)/8M/4CBCX440XeonE3-1240V5(3.50GHZ)/8M/4CBCX441XeonE3-1240LV5(2.10GHZ)/8M/4CBCX442XeonE3-1260LV5(2.90GHZ)/8M/4CBCX443XeonE3-1270V5(3.60GHZ)/8M/4CBCX444XeonE3-1280V5(3.70GHZ)/8M/4CBCX445i3-6320(3.9GHz)/4M/2CBCX446i3-6300T(3.3GHz)/4M/2CBCX447i3-6300(3.8GHz)/4M/2CBCX448i3-6100T(3.2GHz)/3M/2CBCX449i3-6100(3.7GHz)/3M/2CBCX450G4520(3.0GHz)/3M/2CBCX451G4500T(3.0GHz)/3M/2CBCX452G4500(3.5GHz)/3M/2CBCX453G4400(3.3GHz)/3M/2CBCX322E5-2603v3(1.6GHz/6c)/6.4GT/15ML3BCX401E5-2603v4(1.7GHz/6c)/6.4GT/15ML3BCX402E5-2609v4(1.7GHz/8c)/6.4GT/20ML3BCX403E5-2620v4(2.1GHz/8c)/8GT/20ML3BCX406E5-2630v4(2.2GHz/10c)/8GT/25ML3BCX408E5-2640v4(2.4GHz/10c)/8GT/25ML3BCX412E5-2650v4(2.2GHz/12c)9.6GT/30ML3BCX414E5-2660v4(2.0GHz/14c)9.6GT/35ML3 BCX416E5-2680v4(2.4GHz/14c)9.6GT/35ML3 BCX419E5-2690v4(2.6GHz/14c)9.6GT/35ML3 BCX404E5-2623v4(2.6GHz/4c)8.0GT/10ML3 BCX407E5-2637v4(3.5GHz/4c)/9.6GT/15ML3 BCX409E5-2643v4(3.4GHz/6c)/9.6GT/20ML3 BCX415E5-2667v4(3.2GHz/8c)9.6GT/25ML3 BCX417E5-2683v4(2.1GHz/16c)/9.6GT/40ML3 BCX420E5-2695v4(2.1GHz/18c)9.6GT/45ML3 BCX422E5-2697v4(2.3GHz/18c)9.6GT/45ML3 BCX421E5-2697Av4(2.6GHz/16c)9.6GT/40ML3 BCX423E5-2698v4(2.2GHz/20c)9.6GT/50ML BCX424E5-2699v4(2.2GHz/22c)9.6GT/55ML3 BCX405E5-2630LV4(1.8GHz/10c)8.0GT/25ML3 BCX411E5-2650LV4(1.7GHz/14c)9.6GT/35ML3 BCX410E5-2648LV4(1.8GHz/14c)9.6GT/35ML3 BCX413E5-2658V4(2.3GHz/14c)9.6GT/35ML3 BCX418E5-2687WV4(3.0GHz/12c)9.6GT/35ML3 BCX425XeonE7-4809v4(2.1GHz/8C)/6.4GT/20ML3 BCX426XeonE7-4820v4(2.0GHz/10C)/6.4GT/25ML3 BCX427XeonE7-4830v4(2.0GHz/14C)/8.0GT/35ML3 BCX428XeonE7-4850v4(2.1GHz/16C)/8.0GT/40ML3 BCX429XeonE7-8860v4(2.2GHz/18C)/9.6GT/45ML3 BCX430XeonE7-8855v4(2.1GHz/14C)/8.0GT/35ML3 BCX431XeonE7-8867v4(2.4GHz/18C)/9.6GT/45ML3 BCX432XeonE7-8870v4(2.1GHz/20C)/9.6GT/50ML3 BCX433XeonE7-8880v4(2.2GHz/22C)/9.6GT/55ML3 BCX434XeonE7-8890v4(2.2GHz/24C)/9.6GT/60ML3 BCX435XeonE7-8891v4(2.8GHz/10C)/9.6GT/60ML3 BCX436XeonE7-8893v4(3.2GHz/4C)/9.6GT/60ML3 DDR3内存SPT0MEM00006Inspur32GB DDR3L-1600LRDIMM SPT0MEM00007Inspur16GB DDR3-1866RDIMMSPT0MEM00008Inspur16GB DDR3-1600RDIMMSPT0MEM00009Inspur16GB DDR3L-1600RDIMMSPT0MEM0000A Inspur8GB DDR3-1600RDIMMSPT0MEM0000B Inspur8GB DDR3L-1600RDIMMSPT0MEM0000C Inspur4GB DDR3-1600RDIMMSPT0MEM0000D Inspur4GB DDR3L-1600RDIMMDDR4内存DDR4内存BMD1558G_DDR4_UDIMM-EUBMD15616G_DDR4_UDIMM-EUSPT0MEM00002Inspur8GB DDR4-2133MHz(1Rx4)RDIMM BMD1418G RDIMM DDR4内存SPT0MEM00001Inspur16GB DDR4-2133MHz(2Rx4)RDIMM BMD14216G RDIMM DDR4内存SPT0MEM00003Inspur16GB DDR4-2133MHz(1Rx4)RDIMMSPT0MEM00004Inspur32GB DDR4-2133MHz(2Rx4)RDIMM BMD14332G LRDIMM DDR4内存SPT0MEM00005Inspur32GB DDR4-2133MHz(4Rx4)LRDIMM3.5寸企业级SATA（含托架及包装）3.5寸企业级SATA（含托架及包装）SPT0STG35007Inspur3.5"1TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0231TB SATA（企业级）SPT0STG35001Inspur3.5"2TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0422TB SATA（企业级）SPT0STG35006Inspur3.5"3TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0703TB SATA（企业级）SPT0STG35005Inspur3.5"4TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0834TB SATA（企业级）SPT0STG35003Inspur3.5"6TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT1076TB SATA（企业级）SPT0STG35002Inspur3.5"8TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive8TB SATA（企业级）2.5寸企业级SATA（含托架及包装）2.5寸企业级SATA（含托架及包装）SPT0STG25006Inspur2.5"500GB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT062500GB SATA 2.5"（企业级）SPT0STG25005Inspur2.5"1TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive BHT0611TB SATA 2.5"（企业级）SPT0STG25004Inspur2.5''2TB7.2K Enterprise SATA6Gbps Hot Swap HardDrive2TB SATA 2.5"（企业级）2.5寸SAS（含托架及包装）2.5寸SAS（含托架及包装）7,200RPM7,204RPMSPT0STG25S03Inspur2.5"1TB7.2K Enterprise SAS12Gbps Hot Swap Hard Drive BSA0531TB SAS硬盘2.5"SPT0STG25S05Inspur2.5"1TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive BSA0531TB SAS硬盘2.5"SPT0STG25S01Inspur2.5"2TB7.2K Enterprise SAS12Gbps Hot Swap Hard Drive2TB SAS硬盘2.5"10,000RPM10,004RPMSPT0STG25001Inspur2.5"1.2TB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA0841.2T热插拔SAS硬盘(1万转)2.5" SPT0STG25002Inspur2.5"1.2TB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA0841.2T热插拔SAS硬盘(1万转)2.5"SPT0STG25S02Inspur2.5"1.8TB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA1091.8T热插拔SAS硬盘(1万转)2.5"SPT0STG25S0E Inspur2.5"300GB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA023300G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0G Inspur2.5"300GB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA023300G热插拔SAS硬盘(1万转)2.5"SPT0STG25S08Inspur2.5"600GB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S09Inspur2.5"600GB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S04Inspur2.5"900GB10K Enterprise SAS12Gbps Hot Swap Hard Drive BSA057900G热插拔SAS硬盘(1万转)2.5"SPT0STG25S06Inspur2.5"900GB10K Enterprise SAS6Gbps Hot Swap Hard Drive BSA057900G热插拔SAS硬盘(1万转)2.5"15,000RPM15,004RPMSPT0STG25S0D Inspur2.5"300GB15K Enterprise SAS12Gbps Hot Swap Hard Drive BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S0F Inspur2.5"300GB15K Enterprise SAS6Gbps Hot Swap Hard Drive BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S07Inspur2.5"600GB15K Enterprise SAS12Gbps Hot Swap Hard Drive BSA108600G热插拔SAS硬盘(1万5千转)2.5"日立SPT0STG25003Inspur2.5"600GB15K Enterprise SAS6Gbps Hot Swap Hard Drive600G热插拔SAS硬盘(1万5千转)2.5"日立3.5寸SAS（含托架及包装）3.5寸SAS（含托架及包装）SPT0STG35S09Inspur3.5"1TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive TYP0231TB SAS硬盘SPT0STG35S08Inspur3.5"2TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive BSA0762TB SAS硬盘SPT0STG35S05Inspur3.5"2TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive BSA0762TB SAS硬盘SPT0STG35S07Inspur3.5"3TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive TCP0493TB SAS硬盘SPT0STG35S04Inspur3.5"3TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive TCP0493TB SAS硬盘SPT0STG35S06Inspur3.5"4TB7.2K Enterprise SAS6Gbps Hot Swap Hard Drive BSA1064TB SAS硬盘SPT0STG35S03Inspur3.5"4TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive BSA1064TB SAS硬盘SPT0STG35S01Inspur3.5"6TB7.2K Enterprose SAS12Gbps Hot Swap Hard Drive6TB SAS硬盘3.5寸硬盘托架，2.5寸SAS硬盘7,200RPM7,204RPMSPT0STG25S0N Inspur2.5"1TB7.2K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA0531TB SAS硬盘2.5"SPT0STG25S0P Inspur2.5"1TB7.2K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA0531TB SAS硬盘2.5"SPT0STG25S0H Inspur2.5"2TB7.2K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray2TB SAS硬盘2.5"10,000RPM10,004RPMSPT0STG25S0K Inspur2.5"1.2TB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA0841.2T热插拔SAS硬盘(1万转)2.5"SPT0STG25S0M Inspur2.5"1.2TB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA0841.2T热插拔SAS硬盘(1万转)2.5"SPT0STG25S0J Inspur2.5"1.8TB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA1091.8T热插拔SAS硬盘(1万转)2.5"SPT0STG25S11Inspur2.5"300GB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA023300G热插拔SAS硬盘(1万转)2.5" SPT0STG25S13Inspur2.5"300GB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA023300G热插拔SAS硬盘(1万转)2.5" SPT0STG25S0T Inspur2.5"600GB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0V Inspur2.5"600GB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA036600G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0Q Inspur2.5"900GB10K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA057900G热插拔SAS硬盘(1万转)2.5"SPT0STG25S0R Inspur2.5"900GB10K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA057900G热插拔SAS硬盘(1万转)2.5"15,000RPM15,004RPMSPT0STG25S0Z Inspur2.5"300GB15K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S12Inspur2.5"300GB15K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray BSA059300G热插拔SAS硬盘(1万5千转)2.5"希捷SPT0STG25S0S Inspur2.5"600GB15K Enterprise SAS12Gbps Hot Swap HDD in3.5"Tray BSA108600G热插拔SAS硬盘(1万5千转)2.5"日立SPT0STG25S0U Inspur2.5"600GB15K Enterprise SAS6Gbps Hot Swap HDD in3.5"Tray600G热插拔SAS硬盘(1万5千转)2.5"日立3.5寸云盘和归档盘（含托架及包装）3.5寸云盘和归档盘（含托架及包装）SPT0STG3500A Inspur3.5"4TB7.2K Cloud Storage SATA6Gbps Hot Swap Hard Drive4T云盘（7200转）V03ZVSPT0STG3500E Inspur3.5"4TB5.9K Cloud Storage SATA6Gbps Hot Swap Hard Drive4T云盘（5900转）_W0CCP0B0000060053.5寸硬盘托架，2.5寸企业级SATA3.5寸硬盘托架，2.5寸企业级SATASPT0STG25008Inspur2.5"2TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive in3.5"tray2TB SATA 2.5"（企业级）SPT0STG25009Inspur2.5"1TB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive in3.5"tray1TB SATA 2.5"（企业级）SPT0STG2500A Inspur2.5"500GB7.2K Enterprise SATA6Gbps Hot Swap Hard Drive in3.5"tray500GB SATA 2.5"（企业级）PCIE SSD卡PCIE SSD卡BHD025400G MLC SSD PCIe接口BHD026600G MLC SSD PCIe接口BHD024800G MLC SSD PCIe接口BHD0231.2T MLC SSD PCIe接口BHD0272.4T MLC SSD PCIe接口其他硬盘及组件其他硬盘及组件BHE00264G SATA-DOM硬盘BHD02880G MLC SSD 2.5BHD029120G MLC SSD 2.5BHD004160G MLC SSD 2.5BHD030240G MLC SSD 2.5BHD010300G MLC SSD 2.5BHD016480G MLC SSD 2.5BHD009600G MLC SSD 2.5BHD019800G MLC SSD 2.5TYP004500GB SATA（桌面级）BPT0201T SATA（桌面级）BSA012300G热插拔SAS硬盘(1万5千转)RAID卡RAID卡SPT0POC00R06Inspur SAS3008iMR12Gbps PCIe Adapter BSS012INSPUR八通道高性能SAS3008卡IMR（可选Raid key)SPT0THR00K02Inspur RAID5Upgrate key for SAS3008iMR12Gbps PCIe Adapter BSS013INSPUR八通道高性能3008Raid KeySPT0POC00R02Inspur RAID1GB9271-8i6Gbps PCIe Adapter by Avago BRE028八通道SAS高性能RAID-9271（1G缓存)SPT0THR00D02Inspur iBBU09Battery Backup Unit Upgrade for RAID2208MR,9271-8i PCIe Adapter BDC020八通道SAS高性能RAID-9271电池SPT0THR00D05Inspur Supercapacitor Upgrade for RAID2208MR,9271-8i PCIe Adapter BDC022八通道SAS高性能RAID-9271缓存断电保护模块SPT0THR00K03Inspur RAID CacheCade Pro2.0Key for2208MR,3108MR,9271-8i,9361-8i BRE032RAID卡功能模块-CacheCade模块SPT0POC00R0G Inspur RAID2GB PM806012Gbps PCIe Adapter BDC027INSPUR八通道高性能SAS RAID卡RS0820P(2G缓存)SPT0THR00D01Inspur Supercapacitor for RAID PM8060(1GB,2GB)PCIe Adapter by Adaptec BRE038INSPUR八通道高性能SAS RS0810P缓存断电保护模块SPT0POC00R09Inspur RAID1GB9361-8i12Gbps PCIe Adapter by Avago BRE034八通道SAS高性能RAID-9361（1G缓存)SPT0THR00D03Inspur Supercapacitor Upgrade for RAID1GB9361-8i PCIe Adapter by LSI BDC026八通道SAS高性能RAID-9361（1G缓存)缓存断电保护模块SPT0POC00R08Inspur RAID2GB9361-8i12Gbps PCIe Adapter by Avago BRD036八通道SAS高性能RAID-9361（2G缓存)SPT0THR00D04Inspur Supercapacitor Upgrade for RAID9361-8i(2GB),3108MR(2GB,4GB)by LSI BDC025八通道SAS高性能RAID-9361（2G缓存)缓存断电保护模块SPT0POC00R07Inspur RAID4GB9364-8i12Gbps PCIe Adapter by Avago BRD037八通道SAS高性能LSI RAID-9364（4G缓存+缓存断电保护模块）SPT0POC00R0A Inspur RAID4GB3108MR12Gbps PCIe Adapter BRE040INSPUR八通道高性能SAS RAID卡RS0840L3(4G缓存)电源电源SPT0PSU00001Inspur CRPS800W Platinum Hot Swap Power SupplySPT0PSU00002Inspur CRPS1200W Platinum Hot Swap Power SupplySPT0PSU00003Inspur CRPS550W Platinum Hot Swap Power SupplySPT0PSU00004Inspur CRPS800W Titanium Hot Swap Power SupplySPT0PSU00005Inspur CRPS800W-48VDC Hot Swap Power SupplySPT0PSU00006Inspur CRPS800W336VDC Hot Swap Power SupplyBDY096300W电源适用于NP3020M4BDY097550W白金电源适用于NP3020M4光纤通道连接配件光纤通道连接配件SPT0POC00B01Inspur LPe1250Single Port8Gb Fibre Channel HBA by Emulex TAF019光纤通道HBA卡,FC8Gb,单端口,LC接口SPT0POC00B02Inspur LPe12002Dual Port8Gb Fibre Channel HBA by Emulex TAF021光纤通道HBA卡,FC8Gb,双端口,LC接口SPT0POC00B05Inspur QLE2560Single Port8Gb Fibre Channel HBA by Qlogic TAF019光纤通道HBA卡,FC8Gb,单端口,LC接口SPT0POC00B06Inspur QLE2562Dual Port8Gb Fibre Channel HBA by Qlogic TAF021光纤通道HBA卡,FC8Gb,双端口,LC接口SPT0POC00B03Inspur LPe16000B Single Port16Gb Fibre Channel HBA by Emulex TAF028光纤通道HBA卡,FC16Gb,单端口,LC接口SPT0POC00B07Inspur QLE2670Single Port16Gb Fibre Channel HBA by Qlogic TAF028光纤通道HBA卡,FC16Gb,单端口,LC接口SPT0POC00B04Inspur LPe16002B Dual Port16Gb Fibre Channel Adapter by Emulex TAF029光纤通道HBA卡,FC16Gb,双端口,LC接口转接卡转接卡BKZ013PCI-E转接卡套件（NF8460M3）PCI-E转接卡套件（NF8460M4）网卡及远程管理卡网卡及远程管理卡SPT0POC00W01Inspur I350PCIe1Gb2Port Base-T Ethernet Adapter BNT004双口千兆网卡（RJ45接口）SPT0POC00W02Inspur I350PCIe1Gb4Port Base-T Ethernet Adapter BNT010四口千兆网卡（RJ45接口）SPT0POC00W06Inspur I350PCIe1Gb4Port SPF Ethernet Adapter BNT042四口千兆网卡（光纤接口）SPT0POC00W07Inspur82599ES PCIe10Gb1Port with Multi-mode SFP+module Ethernet Adapter单口万兆网卡（光纤接口含多模模块）SPT0POC00W09Inspur MCX312B-XCCT PCIe10Gb2Port SFP+Ethernet Adapter BNT009双口万兆网卡（光纤接口）SPT0POC00W08Inspur82599ES PCIe10Gb2Port with Multi-mode SFP+module Ethernet Adapter双口万兆网卡（光纤接口含多模模块）SPT0POC00W0J Inspur X710PCIe x8+x110Gb2Port SFP+Ethernet Daughter Card出厂前升级INSPUR双口万兆FLOM网卡（光纤接口），不含光模块SPT0POC00W0H Inspur82599ES PCIe x8+x110Gb1Port SFP+Ethernet Adapter BNT034INSPUR单口万兆网卡（光纤接口），不含光模块SPT0POC00W0K Inspur CX3PCIe x8+110Gb1Port SFP+Ethernet Adapter BNT034INSPUR单口万兆网卡（光纤接口），不含光模块SPT0POC00W0G Inspur82599ES PCIe x8+x110Gb2Port SFP+Ethernet Adapter BNT035INSPUR双口万兆网卡（光纤接口），不含光模块SPT0POC00W0L Inspur CX3PCIe x8+110Gb2Port SFP+Ethernet AdapterSPT0THR00S01Inspur1Gb Single-Mode SPF+Optical Module INSPUR千兆网卡光模块（单模，搭配INSPUR万兆网卡使用）SPT0THR00S02Inspur1Gb Multi-Mode SFP+Optical Module INSPUR千兆网卡光模块（多模，搭配INSPUR万兆网卡使用）SPT0THR00S03Inspur10Gb Single-Mode SFP+Optical Module BNT036INSPUR万兆网卡光模块（单模，搭配INSPUR万兆网卡使用）SPT0THR00S04Inspur10Gb Multi-Mode SFP+Optical Module BNT037INSPUR万兆网卡光模块（多模，搭配INSPUR万兆网卡使用）SPT0POC00W0A Inspur T580-SO-CR PCIe40Gb2Port QSFP+Ethernet Adapter BNT039双口40GbE网卡光纤接口，不含光模块，需搭配40G网卡线缆使用SPT0POC00W03Inspur X540PCIe10Gb2Port Base-T Ethernet Adapter BNT030双口万兆网卡（RJ45接口）SPT0POC00W04Inspur I350PCIe x8+11Gb4Port Base-T Ethernet Adapter出厂前升级INSPUR四口千兆网卡（RJ45接口）SPT0POC00W05Inspur X540PCIe x8+110Gb2Port Base-T Ethernet Adapter INSPUR双口万兆网卡（RJ45接口）BNT002单口千兆网卡（光纤接口）BNT005双口千兆网卡（光纤接口）BNT008单口万兆网卡（光纤接口）BNT040双口40GbE CNA网卡光纤接口，不含光模块，需搭配40G网卡线缆使用BNT04140G网卡线缆，15米Infiniband card Infiniband cardSPT0POC00C01Inspur MCX353A-FCBT56Gb1Port with QSFP Module InfiniBand Adapter TAF027HCA卡(单口IB卡56GB)SPT0POC00C02Inspur MCX353A-FCBT56Gb2Port with QSFP Module InfiniBand Adapter HCA卡(双口IB卡56GB)软驱、光驱、刻录机软驱、光驱、刻录机BHU001U盘软驱MGQ002标准DVDBCD006DVD刻录机BCD017USB DVD刻录机BCD026SLIM DVD刻录机显卡显卡BXK039显卡K420（显存1G）BXK040显卡K620（显存2G）BXK041显卡K2200（显存4G）显示器显示器BOV01419.5寸液晶显示器BOV00921.5寸液晶显示器BOV01523.6寸液晶显示器RACK机柜及组件RACK机柜及组件BOG022浪潮42U标准服务器机柜（无PDU）/2000mm×1100mm×600mm（H×D×W）BPK0396口PDU国标万用插口/10ABPK03821口PDU国标万用插口/32ABTP00140公斤机柜托盘BTP002100公斤机柜托盘BOK001键盘B0M001鼠标BOQ008四合一切换器17寸液晶8口/USBBOQ009四合一切换器17寸液晶16口/USBBOQ0018口切换器BOQ00516口切换器其他其他BPT002配件，背板_INSPUR_SAS_2.5X8BPT017硬盘模组_2.5×8BPT003配件，背板_INSPUR_SAS12G_4X3.5BPT004配件，背板_INSPUR_SAS12G_8X2.5BPT008配件，SAS线BPT010配件，风扇BPT011配件，硬盘托架_2.5寸BPT012配件，硬盘托架_3.5寸BPT013配件，包装箱BPT014配件，电源线BPT015配件，服务器用户手册及睿捷服务器套件光盘BPL001NF5270M42U前面板V08WY0208000B014SPT0BKD00001Inspur Milestone42U3.5"x4Drive Backplane Kit SPT0BKD00002Inspur Milestone42U Rear2.5"x2Drive Backplane Kit SPT0BKD00003Inspur Milestone42U2.5"x8Drive Backplane Kit。

奥索凌阳方案适用屏编码和驱动对照

奥索凌阳方案适用屏编码和驱动对照奥索凌阳方案适用屏编码和驱动对照2011-10-4 08:27阅读(26)转载自风的味道2.8寸屏：5408B----FPCHL2401 07CV05408------H2801 FPCHL2401.14A SXD0017 2401QQ AO24QN029325------12N 17N 154000 SAT28S01A05 SXD0002 SAT24000 37H 12A05 2803 HW240320F-2L-0A-20 HJ2810AO-AOFPC 0000000024-0019325C----3225LS2088A SAT28009A05 DST280AU006 4N 88N V029325B----LS24XD 22N 17N9320------19E TS028HA 1N 07N 9N SR779028-AO DST28014L037 CMS21019331-----FTM280F17N 17E FTM280F6W 7N 6E FTM280F10E 7NV 8Q 8A18 21N FPC2802-VO TTPHJ07NVO1289-----JS28ND603C-FPC WST240320S280AV02 1298-----SK001V02 HL2802 36B 10N M30111A197 CMS2101-03A SX2.8C98-4_3-37C T28-A T28-B FPC4218-V0123225-----AU28 036 SXD0006 001 7C SAT2400 12A FPC2803-VO 28A03-VO 12A05 KK240037 0039-C 280NP04-04 3728E SX2.8T28-4_3-37H SXD0001PNL9328------T-0028-A61505V---LS28XD 21N 21E 07NVO A18 FPC1A0027-01-A SYM280T01-A093116----15400053909335IH----24008C18 0367781-----21VO 24N 11N 4N 10N 18V2 FPC-TTHJ07CVO CM012 81-36A 8B26 SY280CM0204535-----SXD00179331LG----Q365205----17V0 YSD FPC 28A03-V0 18V21505C----2.4TE8347-----46E FPC-FTM280C05N 61N 80E TP65K9320LG----SAT28008A18 8K1304 KFM529B21 SR7790928-A061505W----SAT28008A18-Q337502----16N 13N 16E 17E 13E 12N SXD00651297----SAT28009A1161505U-FTM----B21 FPA-SH9873-01A_56-PCB RO61505R(3062主控上用）S6D04M0----TF28001A68070-----NT4PTM3728B MHJ101V1 ZBH028GT-01 SXD00688347D-----ZBH028GT-06 FPC-FTM280C58W-008367-----ZBH028GT-02V18230----XY-2405-HSD10-V2 LC2803.1R61509----QXD028-1000-FB9328LG----07V9338-----91N TFT028E001 EY028CMIL-001-V029335LG----LS28003ILI9320----826709341-----T-280A03-B-16 YQ24TM41-36CLCM0154------2805-PR112-V22.4屏5408-----A024QN025408B----FPCHL2401 SAT24001005 NOATS-V019325-----FPC-S2 TM240320C1NFWCWC FP-29325C----25N3225----Q36 154002660 FTP240F17N FTP240F22N 8C 24N 25W V1 66N 3624A9328----SPT-024-0061298----SK001V02 10N M30111A1978347----FTP240C61N 46E 5N FTP240C65N 3624F 240C29N 240C09N M403A1079325B----22N LS24XD FPC-JTBJ05JUO1505C----XY-2.4TE-V161580----FTP240H25N FTO240HO 32N 04N 25N9335HY----AST24011C19 091110S61505BOE----AST24011C19L LS-100810背面7781----24N 11N 81-36A61505W----LS24Q35 24036095205----53F F240253F 17V09320----01-1D FPC-FTS240W01 JC T24-E T24-A29340----T24BDHJ71V1 240A28-A-16 40-36A 134 240A37-A FPC-FTM240C179N-00S6D04H0----36PIN SXD0066HX8230------LC32002.1 XY-2405 HSDIO-V34535------SXD00249341-----YQ24TM41-36C T-240A82-D-16261卡屏的屏驱动----32063.5寸ST2102----KR035PA5S VT320240S70-A350TMT035---15400T4500 HW320 158000300 S805037535C R0HS 3.5_FPC_10FTS350----735M2 SN570 FMFU-2F 413450017002 513450006002LQ035----8501显示屏编号与屏驱动对应表1 排线丝印侧面丝印驱动IC2 024-22V1 93203 24WIT36-FPC01 93204 1540001660 TS024HAADD04-00 5408B5 1540002660 9325C6 24008C05-V1 93257 AF240B-36B V1.0 AL240EI-3501 77878 AF-240B-2V4.1 AL-240B-S1 77879 AF283E1-37A V1.2 9320-2.810 AF240E1-36C V1.0 778511 AF240E1-36C V2.0 778512 AF283P3-37A V1.0 9325-2.813 CMS2101-03A 080815 080918-2801A背光片 540814 CMS2101-03A 080815 CMS2101 HCT003-280-41F背光片1298CMT304-1(1)-08 8 30 5408B15 CMS2101-3 932516 FPC-FTS240F01 FTS240H03 150517 FPC-FTS240D03 129818 FPC-FTS240D14 129819 FPC-FTP240CO9N FTS240B03 834720 FPC-FTS240W01 FTP240W47N 129821 FPC-FTM280P04N M30111A150 9325C-2.822 FPC-FTM280C05N 8347-2.823 FPC-FTM280F01N FTM280F01N-00 9320-2.824 FPC-FTM280F06W FPC-FTM280F06N-00 090313(背面）933125 FPC-FTM280F07N R61505-2.826 FPC-FTM280C13N 932527 FPC-FTM280P05N M403A486 9325C28 FPC-Y80032 V01 N0711-14-04 9325-2.829 FTP240D10N-01 0703 129830 FTP240D24N-00 090307 778131 FPC-FTP280P05N FTP280P14N-01背面 778132 FTP240W17N-03 080807 9325B33 FG0280FLW-0802-1 8347-2.834 FPC_HL_2401 540835 HL2801 5408-2.836 HL2402B 5408B CMO37 HL2402A 5409B CMO38 LDH240*320F08M 778539 LS2288A 6813-2.840 M30111A116 129841 M30111A059 932542 MFC-S07024 V02 834743 MT321TLLKJ-13 排线接口不同 9320B-2.844 SX-2.4CPT-9325 9325B45 SAT28009A5 9325C-2.846 STA28008A18 9331-2.847 XJ2402-V01 834748 XD028-V01 9325-2.849 XSY LL240-003-081024 R61505（2.4)50 ZCT-24FPC-S1 778551 ZCT-24FPC-S2 9325xp024cp25-36v0 9325hw240320f-0j-0c-10 9325m403a545 1298hw240400f-3a 5420ygg000240ns04-03 9325zc24t04m 9320kfm281e01 9320truly-c tft8k1081fpc-a1-e 9320cf024lgg31-36av1 9320huaruit-0033-a-fpc 9325huaruit-0012-b 9325af240B-36b 7787af-283e1-37av1.2 9320GIANTPLUS KFM281E01-1D 9320 GIANTPLUS KFM281E01-1B 9320CF024LGG31-36AV1 9320 GIANTPLUS KFM281101-1A 9320JLST24PV25-36A 9325ZC24T02 9325DST280CPT003 9325 2.8寸 13SX-2.8CPT-932502 9325 2.8寸 13BX280V003（B0XIANTICH） 9325 2.8寸 13NT4SGP3T28A 5408B 2.8寸 10NT4SGP3T28A AU9325 2.8寸 17NT4PC36728A-BL AU9325 2.8寸 17FPC-TGG000280NP04-07 9325 2.8寸 24LEB-DO428000028C1 9325 2.8寸 24CMS210-03 9325 2.8寸 12HW240320F-2D-0B-10 9325 2.8寸 12HW240320F-2D-0B-20 9325 触摸 13SAT28009A05 9325 2.8寸 13LS2288A 9325 2.8寸 13LS2289A 1505 2.8C寸 9LS2288A 9328 2.8寸 13FPC-FTP280P04N-00 9325 2.8C寸 13FPC-FTM280F0TN-00 61505 2.8寸 27FPC-FTPM280F09N-01、FTM240D17N-00 61505 2.8寸 27 FPC-FTM280F06W-00（FTM280F06N-00） 9331 2.8寸 32NTSAU3624A 5408B 2.4寸 10NT4SHY3624A 3225+HY 2.4寸 35024HAADD04 9325 2.4寸 13FPC-T240BQC 9325 2.4寸 13AF240E3-36D 9325 2.4寸 13（AL240E1-3S01） 9325 2.4寸SX-TGS240STCPYB00-00 7785 2.4寸 15（TGS240STCP-8V1，LDH240X320F008M）SX-2.4CPT-9325 9325 2.4寸 18（SX-TGS2.4CPT）FPC-FTS240D03-02 1298 2.4寸 6（FTP240D10N-02） 9325 2.4寸 13SX-TGS24C98-4：3-36B 1298 2.4寸 6FPC-BKS2401 1298 2.4寸 6SAT24009C05 9325 2.4寸 13SAT24009C05L 9325 2.4寸 13（18）KTM377A01-1A 1298 2.4寸 6SAT24009C05 9325 2.4寸 13TGG000240NS04-03 9325 2.4寸 18（13）（LCM-TGG000240NS04-03）FPC-TTHJ05E00XA 9325 2.4寸 27 (FECHTKONCPT24-9325)24008CIT-Q29 1505 2.4寸 37 1540003250（FMARK） 9325 2.4寸 26 T-0033-B（HUARUI） 9325 2.4寸 26T-0053-A 1297 2.4寸 30T-0033-B 68B（CPT） 2.4寸 26T-0012-B（T-0024-A） 9325 2.4寸 18 （T-0059-A）T-0028-A(HUARUI) 9325 2.8寸2X-GT009BL 7783 2.4寸 25JLST24IH81-36A 7781 2.4寸 25JST24TM25-36A 9328 2.4寸 13SX24C98-413-36B 1298 2.4寸 6(SX-TGS240SDCPET00-00)CF024LCD87-36AVO 7787 2.4寸 4AF240B-36B V1.0 7787 2.4寸 4凌达所有屏 9320 1T-0030 9320 2.4寸 1KT240FC-003B 9320 2.4寸 1FPC-FTS240W01 9320 2.4寸 1FPC1032 9320 2.4寸 124WIT36-FPC01 9320 2.4寸 1FPC-FTS240F01 1505 2.4寸PF240320F-2C-OA-30 8347 2.4寸FPC24T49-A1 9325 2.4寸FPC-TGG000280NP04-07 9325 2.8寸TSA24002C05 9325 2.4寸ST24TM25-36A V1.0 9325 2.4寸FPC-0047A2 9320 2.4寸排线丝印侧面丝印驱动ICAF240B-36B V1.0 :AL240EI-3501 7787AF-240B-2V4.1 : AL-240B-S1 7787AF283E1-37A V1.2 9320-2.8AF240E1-36C V1.0 7785AF240E1-36C V2.0 7785AF283P3-37A V1.0 9325-2.8FPC-FTS240F01 FTS240H03 1505FPC-FTS240D03 1298FPC-FTS240D14 1298FPC-FTP240CO9N FTS240B03 8347FPC-FTM280C05N 8347-2.8FPC-FTM280F01N FTM280F01N-00 9320-2.8 FPC-Y80032 V01 N0711-14-04 9325-2.8 FTP240D10N-01 0703 1298FTP240W17N-03 080807 9325BJLST24PV25-36A V1.0 9325T-0033-B 9325024-22V1 9320FPC_HL_2401 5408HL2801 5408-2.8MFC-S07024 V02 8347MFC-S07001 V04 932024WIT36-FPC01 9320MFC-M240702-A 9320XJ2402-V01 8347XD028-V01 9325-2.8ZCT-24FPC-S1 7785ZCT-24FPC-S2 9325LDH240*320F08M 77851540001660 TS024HAADD04-00 5408B1540002660 9325C24008C05-V1 9325MT321TLLKJ-13 排线接口不同 9320B-2.8SX-2.4CPT-9325 9325BCMS2101-3 9325CMS2101-03A 080815 080918-2801A背光片 540834 M30111A116 1298HW240320F-oj-oc-10 9325FPC24T49-A1 9325ZCT-24FPC-S2 9325NOAIS NT4SAU3624A V01 5408CMS057-2 @ HX(8347)T028 0741Z HL240HYF 0803 7787Hantech HR24F11#02 7787JYD-G5060 GWIL36S03240A-A恻边号GXBL240-019LL240-003 08031141 9325FPC-Y80030 V01 恻边号yxd02436l09 je-c068(b) 9320FPC-Y80030 V01 9320M30111A055 8347M403A107 8347DM2432003-001 这个是2.8的，37线，驱动9320FPC24T49-A1 2.4 9325AF240E1-36B V2.0 7785FPC-Q90044-1 2.8 9325QD -24034Bo-1 2.4 9325NOAIS NT4SAU36 24A V01JLST24CP25-36A 2.4 9325板号：MP-763C-SL V1.1 2005.12.16上位屏CM50011ACT6-01AL 2006/03/06 20针1.5寸元件排列：由上到下整齐一行：C11-C7-C5-C12-R1-R2-C1-C6-C2-C3-C21-C22-C23-C31-C4-C0-D1可代换下位屏：CD50006ACT6-27PIN 2005/10/24 27针元件排列：由上到下整齐一行：RL-CVLCD-CVB0A-CVB1A(这是个利用同尺寸不同针数进行的代换)板号：SD008-V2 2006-07-25-MDLU （ROCKCHIPS 2606A）原屏：CMT027 V1.0 2006-08-09 29针可用屏：FPC-S95012-1 V01 SZSUCCESS 06.01 29针板号：JR040_MAIN_V3.1 2007.04.17 (2608a JXD858)原屏：TFT-2.4-S3D 36PIN IL9320可用屏：DZX2.4-S2 V06 (2608A JXD859)资源：GAUO GASP29P03200-002-A-FPC SA VER 1.3(即屏侧边的标记)板号：SG243 V2 0703140941P2原屏：GIANTPLUS KFM281E01-1D可用：CF024LGG31-36AV1(36P,2.4')可用：GIANTPLUS KFM281E01-1B可用：TRULY-C TFT8K1081FPC-A1-E适用机型：纽曼K8 (2.0版)-ANYKA-AK3225。

【计算机工程与设计】_嵌入式操作系统_期刊发文热词逐年推荐_20140726

推荐指数 8 4 4 4 4 4 3 3 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2009年序号 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
现场可编程逻辑门阵列状态转换图焓差法滤波温度消息响应测试模型流水线操作水果正则有符号数模糊控制器模拟信号检测机载防撞系统有限脉冲响应智能卡显示界面时差法时实操作系统:嵌入式操作系统无线传感器网络断路器数据链数据挖掘数字控制数字信号处理故障诊断故障注入器故障模式操作系统移植操作系统摄像头接口电路性能测试微控制器操作系统异构性并行常系数乘法嵌入式技术嵌入式usb通信实时进程实时系统实时性实时应用程序接口实时处理安全单向套接字大规模节点多模光纤多方位采样多径多平台图像采集图像融合命令行解释器
科研热词嵌入式系统嵌入式现场可编程门阵列实时操作系统嵌入式实时操作系统 linux 通信协议网络通信系统结构移植电池充电模块化数控系统数字信号处理器接口嵌入式操作系统实时多任务图像处理优先级任务以太网 μ c/os-ⅱ操作系统 μ c/os-ⅱ vxworks can总线 arm 高级精简指令集处理器驱动设计驱动程序通用网关接口赫夫曼解码资源管理谐波检测调度抖动读卡器设备驱动程序视频采集视频监控菜单网络设备驱动网络设备网络服务器网络控制网络缓冲队列经验公式发现红外通信红外图像矿井通风监测系统相对定位相关器

EYSNCN系列蓝牙低功耗模块评估板用户手册说明书

2020 EVALUATION BOARD MANUALEBSNCN SeriesEVALUATION KIT MANUALEKSNCN Seriesfor EYSNCN series BluetoothⓇlow energy Module2020EBSNCN SeriesUSBSerial UART interface and power supply are possiblewith one USB cable. And this board has the SWDconnector terminal for software development.Mounted moduleEYSNCN Series (9.6mm x 12.9mm x 2.0mm_MAX)Nordic nRF52811 / ARM® Cortex™-M4 32 bit processor49-pin Land Grid Array / 30GPIOs / SWD- Basic Module –Taiyo Yuden writes firmware for (EYSNCNZWW) SoftDevice to this product.The user can develop unique application for the module.Content1 EBSNCN Series Evaluation Board (PCB name_TE8648-2) 1 pc2 J-Link Lite (EKSNCN Series Only) 1 set1. EBSNCN2. EKSNCN2020Please cut these 6 lines on the boardif you want to separate U1 and U2.20201) All pin headers are 2.54mm pitch. And distance between CN3 and CN4 is 15.24mm .2) CN3,4,5,6,8, C4,6,10-12, L1, R5-7,9,10, SB1-7, TP1 are not mounted (N.M.).3) D1 (LED): 3.3V Indicator4) D2 (LED): UART TX Indicator5) D3 (LED): UART RX Indicator6) SW1 (Push button): Module Reset (active low)Silkscreen PrintingCN6: Power consumption monitor Default: Short CN5: Jumper of internal 3V3 Default: Short CN3: GPIOs and external DC power supply CN2: miniUSB - UART +5V DC power supply CN1: SWD (for J-link lite) SW1: Reset button U2: BLE Module EYSNCN Series CN4: GPIOs, SWD and DC power supply R6: Antenna selector Default: Internal Antenna CN7: RF Connector U.FL-R-SMT (HIROSE) CN8: GPIOs CN9: GPIOs R8JPW: DC/DC converter setup20202020 3.3V from 3V3OUT of FT232RQ. For software development Nordic-DK and Use case ・SEGGER Embedded Studio・nRF Connect for Desktopetc.miniUSB SWD EBSNCN Series SWD : Serial Wire Debug For example, please use J-Link Lite CortexM-9 JTAG/SWD Emulator. EKSNCN Series included CN1 supports the connection of the 10 pin 1.27 mm flat cable. Nordic-DK /eng/Products/Bluetooth-low-energy/nRF52-DK Please be careful about the directions.Nordic nRF Connect etc. NORDIC DK2020To measure the current, please cut the shorting 1pin and 2 pin of CN6. And connect an ampere-meter between the pins of connector CN6 to monitor the current directly.2) About the power supply of the moduleWhen you use external power supply, please supply power from 15 and 16pin of CN3. On this configuration, please cut the short circuit 1pin and 2pin of CN5 in order to separate 3V3OUT of FT232RQ.3) USB to serial UART interfaceIt needs to install driver of FT232RQ to use USB for UART interface.The drivers are available on FTDI website./Drivers/D2XX.htmIn addition, by the application development, please assign GPIO as follows.GPIO UARTP0.05 RTSP0.06 TXP0.07 CTSP0.08 RX2020。

爱森Moeller系列快速连接速控器198745的产品说明说明书

Eaton 198745Eaton Moeller® series Rapid Link - Speed controllers, 2.4 A, 0.75 kW, Sensor input 4, 180/207 V DC, AS-Interface®, S-7.4 for 31 modules, HAN Q4/2, with manual override switchGeneral specificationsEaton Moeller® series Rapid Link Speed controller198745RASP5-2401A31-412R000S14015081968039157 mm 270 mm 220 mm 3.58 kgUL approval RoHSIEC/EN 61800-5-1 CE UL 61800-5-1Product NameCatalog NumberModel CodeEANProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes 3 fixed speeds and 1 potentiometer speedcan be switched over from U/f to (vector) speed control Connection of supply voltage via adapter480 VIs the panel builder's responsibility. The specifications for the switchgear must be observed.400 V AC, 3-phase480 V AC, 3-phaseMeets the product standard's requirements.0.75 kW500 VMeets the product standard's requirements.-40 °C380 VKey switch position OFF/RESETKey switch position HANDManual override switchIGBT inverterThermo-click with safe isolationPC connectionKey switch position AUTOTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationSelector switch (Positions: REV - OFF - FWD)Control unitInternal DC linkPTC thermistor monitoring0 Hz200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section Generation Change RA-SP to RASP5Electromagnetic compatibility (EMC)Connecting drives to generator suppliesGeneration change from RA-SP to RASP 4.0Generation change RAMO4 to RAMO5Configuration to Rockwell PLC for Rapid LinkGeneration Change RASP4 to RASP5Generation change from RA-MO to RAMO 4.0Rapid Link 5 - brochureDA-SW-drivesConnect - InstallationshilfeDA-SW-Driver DX-CBL-PC-3M0DA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnectDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect USB Driver DX-COM-PCKITDA-SW-drivesConnect - installation helpMaterial handling applications - airports, warehouses and intra-logisticsProduct Range Catalog Drives Engineering-ENProduct Range Catalog Drives EngineeringDA-DC-00004508.pdfDA-DC-00004514.pdfDA-DC-00004184.pdfDA-DC-00003964.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-005.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-004.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.epsETN.RASP5-2401A31-412R000S1.edzIL034085ZUMains voltage - max10.11 Short-circuit ratingRated operational voltage10.4 Clearances and creepage distancesOutput at quadratic load at rated output voltage - max Output voltage - max10.2.3.1 Verification of thermal stability of enclosures Ambient storage temperature - minMains voltage - minFitted with:Output frequency - minStarting current - max Application notes BrochuresCatalogs Certification reports DrawingseCAD model Installation instructions10 kA40 °CAS-Interface1 HP500 Hz8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuitParameterization: FieldbusDiagnostics and reset on device and via AS-Interface Parameterization: drivesConnectParameterization: drivesConnect mobile (App) Parameterization: Keypad-10 °C≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeDoes not apply, since the entire switchgear needs to be evaluated.2.4 ADoes not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Speed controller Rapid Link 5MZ040046_EN MN034004EN MN040003_ENrasp5_v24.stp ramo5_v24.dwgRated conditional short-circuit current (Iq)Ambient operating temperature - maxCommunication interfaceAssigned motor power at 115/120 V, 60 Hz, 1-phase Output frequency - maxSwitching frequencyFeaturesAmbient operating temperature - minBraking currentNumber of HW-interfaces (serial TTY)10.6 Incorporation of switching devices and components Nominal output current I2N10.2.6 Mechanical impact10.3 Degree of protection of assembliesProduct categoryRadio interference class Installation videos Manuals and user guidesmCAD modelC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.C1: for conducted emissions onlyHeat dissipation capacity Pdiss0 WRated control voltage (Uc)180/207 V DC (external brake 50/60 Hz)24 V DC (-15 %/+20 %, external via AS-Interface® plug)Assigned motor power at 460/480 V, 60 Hz, 3-phase1 HPNumber of HW-interfaces (RS-422)Mains current distortion120 %ProtocolASIAS-Interface profile cable: S-7.4 for 31 modules10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP65NEMA 12Ambient storage temperature - max70 °CRated impulse withstand voltage (Uimp)2000 VConnectionPlug type: HAN Q4/2Overload currentAt 40 °CFor 60 s every 600 sFunctionsFor actuation of motors with mechanical brake3 fixed speeds1 potentiometer speedOutput at linear load at rated output voltage - max0.75 kWMains voltage tolerance380 - 480 V (-10 %/+10 %, at 50/60 Hz)Leakage current at ground IPE - max3.5 mAConverter typeU converter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftApplication in domestic and commercial area permittedYesNumber of inputs (analog)Number of phases (output)310.12 Electromagnetic compatibilityIs the panel builder's responsibility. The specifications for the switchgear must be observed.10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.Number of HW-interfaces (RS-485)1Number of HW-interfaces (industrial ethernet)Efficiency97 % (η)System configuration typeCenter-point earthed star network (TN-S network)Phase-earthed AC supply systems are not permitted.AC voltage10.8 Connections for external conductorsIs the panel builder's responsibility.ProtectionFinger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)Braking voltage280/207 V DC -15 % / +10 %, Actuator for external motor brakeApplication in industrial area permittedYesClimatic proofing< 95 %, no condensationIn accordance with IEC/EN 5017810.9.3 Impulse withstand voltageIs the panel builder's responsibility.Overload current IL at 150% overload3.6 AInput current ILN at 150% overload2.5 ANumber of HW-interfaces (RS-232)Number of inputs (digital)4Current limitationAdjustable, motor, main circuit0.2 - 2.4 A, motor, main circuitCable lengthC2 ≤ 5 m, maximum motor cable lengthC1 ≤ 1 m, maximum motor cable lengthC3 ≤ 25 m, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 seconds10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Heat dissipation per pole, current-dependent Pvid0 WElectromagnetic compatibility1st and 2nd environments (according to EN 61800-3)Resolution0.1 Hz (Frequency resolution, setpoint value)Assigned motor power at 460/480 V, 60 Hz1 HPRelative symmetric net voltage tolerance10 %Rated operational current (Ie)2.4 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)Number of outputs (analog)Rated operational power at 380/400 V, 50 Hz, 3-phase0.75 kWNumber of HW-interfaces (USB)Operating modeU/f controlBLDC motorsPM and LSPM motorsSensorless vector control (SLV)Synchronous reluctance motorsRated frequency - min45 HzDelay time< 10 ms, On-delay< 10 ms, Off-delayNumber of outputs (digital)Power consumption32 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Number of HW-interfaces (other)1Rated frequency - max66 HzVibrationResistance: 6 Hz, Amplitude 0.15 mmResistance: According to IEC/EN 60068-2-6Resistance: 10 - 150 Hz, Oscillation frequencyResistance: 57 Hz, Amplitude transition frequency on accelerationShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuit10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Braking torque≤ 30 % (I/Ie)Adjustable to 100 % (I/Ie), DC - Main circuitRelative symmetric net frequency tolerance10 %10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Number of HW-interfaces (parallel)Assigned motor power at 230/240 V, 60 Hz, 1-phase1 HPInterfacesSpecification: S-7.4 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mANumber of slave addresses: 31 (AS-Interface®)Number of phases (input)3Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia27.5 W at 50% current and 90% speed 31.8 W at 100% current and 90% speed 33.5 W at 25% current and 50% speed 34.6 W at 50% current and 50% speed 35.1 W at 25% current and 0% speed 36.6 W at 100% current and 50% speed 36.8 W at 50% current and 0% speed 40.7 W at 100% current and 0% speed 0Max. 2000 mAbove 1000 m with 1 % performance reduction per 100 mHeat dissipation at current/speed Number of interfaces (PROFINET)Altitude。

TRIO 209,205说明书

在控制器发出运动指令后，会根据反馈回来的信号，对运动执行情况作出判断和调整。五、上传监控信息
用户一般需要直观的监控整个系统的运行情况，这样控制器会根据客户的需要，把相关信息上传到上位机或触摸屏。 ¾ 驱动器
受控于运动控制器，接收到运动控制指令后，按指令要求，控制电机等执行机构完成动作。 ¾ 执行机构
3.1.2 各部分介绍
CAN 总线：
6
TRIO MOTION TECHNOLOGY
标准的 CAN 总线，其连接端子在五孔连接器上。用于 I/O 模块扩展，也可以用作与其它 CAN 总线设备通讯。 24V 数字输入通道：
在 Euro209 和 Euro205x 本体上提供了多路数字量输入专用通道，可用作零点开关、限位开关、进给保持（暂停）开关等，在 24V 输入电路连接时把 I/O 电源的 0v 与控制器上 I/O0v 相接。模拟量输入通道：
应用 TRIO BASIC 语言可以对 Euro205x 进行多任务编程，Euro205x 支持脱机运行 TRIO BASIC 程序，当程序调试完毕，下载到控制器后，如果不需要上位机的话，Euro205x 可以单独运行。在运动控制器内部固化许多运动算法，只需要用几条简单的 TRIO BASIC 指令，就可产生像凸轮曲线、电子此轮、轴连接、插补等复杂的运动，以及协调运动。
¾ 运动控制器控制器是整个系统的核心，其功能主要是接收运动控制信号及参数，做
出运算，把控制输出送到相应的驱动器或执行器。一、运动参数，控制信号的获取
要完成一定规律的运动，必须要有一定的参数作为前提，比如速度、距离、哪一轴等，这些参数一般由上位机，或触摸屏传送到控制器中。控制信号包括各种限位，手自动转换等，这些信号一般通过数字量输入，或模拟量输入，传送到控制器内部。二、对运动参数的运算

PW0516 蓝牙透传模块使用手册说明书

PW0516BT02串口透传蓝牙模块数据手册版本：V2.4目录目录 (2)●概述 (1)●工作模式示意图 (1)●封装尺寸脚位定义 (1)➢四层板工艺 (1)●串口透传协议说明(桥接模式) (1)●串口A T指令： (1)➢连接间隔设定 (1)➢模块重命名 (1)➢波特率设定 (1)➢获取物理地址MAC (1)➢模块复位 (1)➢广播周期设定 (1)➢附加自定义广播内容 (1)➢定义产品识别码 (1)➢发射功率设定 (1)➢数据延时设定 (1)●广播数据设置 (1)●系统复位与恢复 (1)●IOS APP编程参考 (1)●BLE协议说明(APP接口) (1)➢蓝牙数据通道【服务UUID：0xFFE5】 (1)➢串口数据通道【服务UUID：0xFFE0】 (1)➢PWM输出(4路)【服务UUID：0xFFB0】 (1)➢ADC输入(2路)【服务UUID：0xFFD0】 (1)➢可编程IO(8路)【服务UUID：0xFFF0】 (1)➢定时翻转输出(2 路)【服务UUID：0xFFF0】 (1)➢电平脉宽计数(2 路)【服务UUID：0xFFF0】 (1)➢防劫持密钥【服务UUID：0xFFC0】 (1)➢电池电量报告【服务UUID：0x180F】 (1)➢RSSI报告【服务UUID：0xFFA0】 (1)➢模块参数设置【服务UUID：0xFF90】 (1)➢设备信息【服务UUID：0x180A】 (1)➢端口定时事件配置【服务UUID：0xFE00】 (1)●用APP测试透传功能 (1)●用USBDongle及Btool测试 (1)➢连接BLE模块 (1)➢测试直驱功能 (1)➢测试透传功能 (1)●主机参考代码（透传） (1)●接线图 ............................................................................................................. E rror! Bookmark not defined.➢单独蓝牙模块上电工作图 (1)➢蓝牙模块与串口调试助手连接接线图 (1)➢蓝牙模块MCU连接接线图 (1)●联系我们 (1)概述模块可以工作在桥接模式(透传模式)和直驱模式。

M903L Bluetooth SiP Module - BT 4.0 LE 初步版本说明书

© MtM Technology Corporation. All rights reserved.
Page 3 / 24
MtM Technology Corporation
1 Description
The SiP module: M903L is a small size module that provides full function of Bluetooth 4.0 Low Energy in a tiny module via 32 pins LGA Foot Print. The M903L module provides everything required to create Bluetooth 4.0 Low Energy product with RF, baseband, MCU, qualified Bluetooth v4.0 stack and customer application running on a single IC. M903L enables ultra-low power connectivity and basic data transfer for applications previously limited by the power consumption, size constraints and complexity of other wireless standards. The low power consumption and excellent radio performance make it the best solution for OEM /ODM customers who require embedded Bluetooth 4.0 Low Energy feature, such as, IP camera, car key, sport and fitness watch, mouse, led light bulb etc. The module is based on CSR Bluetooth Low Energy single mode chipset provides Bluetooth Low Energy communication. M903L provides command line interface (CLI) for being easily controlled by a host CPU through UART communication. It also contains a 16 bit MCU to run a variety of applications and for embedded application development. For the software and driver development, we provide extensive technical document and reference software code for the system integration. Hardware evaluation kit and development utilities will be released base on listed OS and processors to OEM customers.

爱原电子有限公司三相加载中心选购指南说明书

ContentsDescriptionPage1..P roduct.Selection.Guide...................................................................................22..S ubmittal.Drawings (5)3-Phase Loadcenter Program2Technical.Data.TD00302001EEffective February 20143-Phase Loadcenter ProgramEATON CORPORATION 1. Product SelectionType BR 3-Phase LoadcentersService3-Phase, four-wire, 208Y/120 Vac 3-Phase, three-wire, 240 Vac Delta Short Circuit Rating Main Breaker Loadcenters10 kAIC using BR / CC / HLD main breakers 22 kAIC using BRH / DK main breakers 100 kAIC using CHH mainMain lug Loadcenters Up to 100 kAIC using series ratings.The rating of main lug only loadcenter is dependent on the lowest branch breaker AIC rating. Convertible Loadcenters 10 kAIC using BR / CC main breakers 22 kAIC using BRH main breakersBranch BreakersTypes BR, BRH, BRHH: 10-150A single, two, and three pole; selected amperage available in Switching Duty, HACR, shunt trip, and high magnetic settingsType GFCB ground fault circuit interrupter: 15–60A single and two-pole Type AFCI arc fault circuit interrupter: 15-20A single-poleTypes BJ and BJH: 125–225A; two- and three-pole sub-fed breakersType BD Twin: 10–50A; two of one-pole; takes one 1-inch (25.4 mm) spaceType BQ and BQC Multi-breaker: 15–30A. Two of two-pole or one two-pole and two one-pole; takes two 1-inch (25.4 mm) spaces Type BRW: 15–30A; two-pole water heater breakers Type BRSN: 15–30A; two-pole switching neutral breakers Type BR 15–100A; two-pole, 240 Vac delta breakers Enclosures Nema Type 1 Indoor/Nema Type 3R OutdoorNema 4x (Available via Flex Center 800-330-6479)Bussing Tin Plated Aluminum or Copper StandardsUL67Figure 1. Three Phase through 600A.3Technical.Data.TD00302001EEffective February 20143-Phase Loadcenter ProgramEATON CORPORATION Main Breaker, 3-Phase.208Y/120.Vac.or.240.Vac.–.Aluminum.BusMain Breaker TypeAmpere RatingCatalog Number IndoorCatalog Number OutdoorMax # of SpacesMax # of CircuitsBox SizeNema1 Nema 3R Wire Size Range CU/AL 60 C or 75 C for MainBR - 10 kAIC100A 3BR1224B1003BR1224B100R 1224C1C1R #4 – 1/0CC - 10 kAIC125A 3BR3042B1253BR3042B125R 3042L1L1R #4 – 2/0150A3BR3042B1503BR3042B150R 3042L L1R #1 – 3/0200A 3BR3042B2003BR3042B200R 3042L1L1R #1 – 250 MCM 3BR4242B2003BR4242B200R 4242L2L2R #1 – 250 MCM 225A3BR4242B2253BR4242B225R4242L2L2R #1 – 300 MCM DK - 22 kAIC 400A 3BR4242B400S 3BR4242B400R42422447(2) 3/0 – 250 kcmil HLD - 10 kAIC600A3BR4242B600S----424224(2) 3/0 – 500 kcmilMain Lug Only ,.3-Phase.208Y/120V.or.240.Vac.–.Aluminum.BusMainAmpere RatingCatalog Number IndoorCatalog Number OutdoorMax # of SpacesMax # of CircuitsBox SizeNema1 Nema 3RWire Size Range CU/AL 60 C or 75 C for Main125A 3BR1224L1253BR1224L125R 1224C1C1R #6 – 2/0150A3BR2442L1503BR2442L150R 2442D1D1R #1 – 300 MCM 200A3BR1224L2003BR1224L200R 1224C4C3R #1 – 300 MCM 3BR1836L2003BR1836L200R 18361943#1 – 300 MCM 3BR3042L2003BR3042L200R 3042G1G1R #1 – 300 MCM 3BR4242L2003BR4242L200R 4242L1L1R #1 – 300 MCM 225A 3BR4242L2253BR4242L225R4242L1L1R #1 – 300 MCM 400A 3BR4242L400S 3BR4242L400R42422246(1) 250 – 750 kcmil or (2) #3/0 – 250 kcmil 600A3BR4242L600S---424222(2) #2 – 500 kcmilConvertible,.3-Phase.208Y/120.Vac.or.240.VacMain Breaker TypeAmpere RatingBus MaterialCatalog Number* IndoorCatalog Number* OutdoorMax # of SpacesMax # of CircuitsBox SizeNema1 Nema 3RBR 100A Aluminum 3BR3030N1003BR3030N100R 3030D1D1R CC125AAluminum3BR1224N1253BR1224N125R1224C1C1R* Order main beaker kit or main lug kit separatelyMain Breaker Kits:Type BRMain Breaker Kit Catalog NumberBR310010 kAIC BRH310022 kAICType CCMain Breaker Kit Catalog NumberCC3100N 10 kAICCC3125N CC3150N CC3175N CC3200N CC3225NGround Bar KitCatalog NumberGBK5 5 POS #14–4GBK520 5 POS #14–4 + (1) 2/0 POS GBK1010 POS #14–4GBK102010 POS 14–4 + (1) 2/0 POS GBK1414 POS 14–4GBK142014 POS #14–4 + (1) 2/0 POS GBK2121 POS #14–4GBK212021 POS #14–4 + (1) 2/0 POSMain Lug Kits Only:Main Lug Kit Catalog Number3BRSF150Note: Additional product selection is available in the Eaton catalog.4Technical.Data.TD00302001EEffective February 20143-Phase Loadcenter ProgramEATON CORPORATION 3-Phase − Main Lug Loadcenters − Copper Bus Main Ampere RatingMaximum Number 1-inch (24.5 mm) SpacesCircuitsCatalog Number IndoorCatalog Number OutdoorBox SizeNema1 Nema 3RWire Size Range CU/AL 60 C or 75 C for Main125A 12243BR1224LC1253BR1224LC125R C1C1R #6 – 3/0150A 24423BR2442LC1503BR2442LC150R D1D1R #4 – 300 MCM 200A 12243BR1224LC2003BR1224LC200R C4C3R #4 – 300 MCM 200A 30423BR3042LC2003BR3042LC200R G1G1R #4 – 300 MCM 200A 42423BR4242LC2003BR4242LC200R L1L1R #4 – 300 MCM 225A 42423BR4242LC2253BR4242LC225R L1L1R #4 – 300 MCM 400A 42423BR4242LC400S 3BR4242BC400R 2447(2) 3/0 - 250 MCM 600A42423BR4242LC600SN/A24N/A(2) 3/0 - 500MCM3-Phase − Main Circuit Breaker Loadcenters − Copper Bus Main Breaker TypeMain Ampere RatingMaximum Number 1-inch (24.5 mm) Spaces CircuitsCatalog NumberIndoorCatalog Number OutdoorBox SizeNema1 Nema 3RWire Size Range CU/AL 60 C or 75 C for MainBR 10 KAIC 10012243BR1224BC1003BR1224BC100R C1C1R #14 – 1/0CC 10 KAIC 15030423BR3042BC1503BR3042BC150R L1L1R #6 – 4/0CC 10 KAIC 20042423BR4242BC2003BR4242BC200R L2L2R #4 – 300 MCM CC 10 KAIC 22542423BR4242BC2253BR4242BC225R L2L2R #4 – 300 MCM DK 22 KAIC 40042423BR4242BC400S 3BR4242BC400R 2447(2) 3/0 - 250 MCM HLD 10 KAIC60042423BR4242BC600SN/A24N/A(2) 3/0 - 500MCM2. Accessories*Accessories for branch circuit breakers Auxiliary components, lockoffs, hold-down kits, lockdogs, handle ties.Sub-feed devices Main and sub-feed lugs 125,150, 225A two and three pole. Shunt trips available.Surge protection SPD Type 1 devices available for 208Y/120 Vac loadcenters Universal rainproof conduit hubsSmall Hub - Group 1 : 3/4, 1, 1-1/4, 1-1/2, 2 inches Large Hub - Group 2: 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 inches Adapter kits available*rmation..5Technical.Data.TD00302001EEffective February 20143-Phase Loadcenter ProgramEATON CORPORATION DimensionsApproximate Dimensions in Inches (mm)Commercial Loadcenter Unit Enclosures—Box Sizesote:N Box sizes do not include covers/fronts.Loadcenters—NEMA T ype 1 IndoorBox SizeHeightWidthDepthC121.00 (533.4) 14.31 (363.5) 3.88 (98.4)C427.00 (685.8)14.31 (363.5) 3.88 (98.4)D129.13 (739.8)14.31 (363.5) 3.88 (98.4)G134.13 (866.8)14.31 (363.5) 3.88 (98.4)L139.00 (990.6)14.31 (363.5) 3.88 (98.4)L245.00 (1143.0)14.31 (363.5) 3.88 (98.4)1944.00 (1117.6)16.16 (410.4) 6.25 (158.8)2044.00 (1117.6)16.16 (410.4) 6.25 (158.8)2254.00 (1371.6)16.22 (412.0) 6.31 (160.3)2466.50 (1689.1)16.22 (412.0) 6.31 (160.3)A 38.00 (965.2)18.13 (460.4) 5.00 (127.0)B 44.00 (1117.6)18.13 (460.4) 5.00 (127.0)C66.50 (1689.1)18.13 (460.4)6.25 (158.8)Loadcenters—NEMA T ype 3R OutdoorBox SizeHeightWidthDepthD1R 29.13 (739.8)14.31 (363.5) 5.19 (131.8)G1R 34.13 (866.8)14.31 (363.5) 5.19 (131.8)L1R 39.00 (990.6)14.31 (363.5) 5.19 (131.8)L2R 45.00 (1143.0)14.31 (363.5) 5.19 (131.8)C1R 21.00 (533.4)14.31 (363.5) 5.19 (131.8)C3R 25.00 (635.0)14.31 (363.5) 5.19 (131.8)4238.00 (965.2)16.31 (414.3) 6.38 (161.9)4344.00 (1117.6)16.31 (414.3) 6.38 (161.9)4654.00 (1371.6)16.31 (414.3) 6.38 (161.9)4766.56 (1690.7)16.31 (414.3)6.38 (161.9)Approximate Dimensions in Inches (mm)Residential Loadcenter KnockoutsKnockouts for Box Sizes C4, D1, G1, L1, L2, C1R, C3R, D1R, G1R, L1R, L2RCodeDiameterA 0.50 (12.7)0.75 (19.1)———B 0.50 (12.7)————C0.50 (12.7) 1.25 (31.8) 1.50 (38.1) 2.00 (50.8) 2.50 (63.5)D 1.25 (31.8) 1.25 (31.8) 2.00 (50.8) 2.50 (63.5)—E 0.50 (12.7)0.75 (19.1) 1.00 (25.4)——F 0.50 (12.7)0.75 (19.1) 1.00 (25.4) 1.50 (38.1) 2.00 (50.8)G 1.25 (31.8) 1.50 (38.1) 2.00 (50.8)——H 0.50 (12.7)0.75 (19.1) 1.00 (25.4) 1.25 (31.8) 1.50 (38.1)I 1.00 (25.4) 1.25 (31.8) 1.50 (38.1) 2.00 (50.8) 2.50 (63.5)J1.00 (25.4)1.25 (31.8)1.50 (38.1)——Residential NEMA T ype 1 Indoor and NEMA T ype 3R Outdoor EnclosuresOutdoor BoxesB1R, B2R, C1R, C3R, D1R,G1R, L1R, L2RIndoor BoxesC1, C2, C4, D1, G1, L1, L2Submittal DrawingsEaton1000.Eaton.Boulevard Cleveland,.OH.44122 United.States877-ETN-CARE.(877-386-2273) ©.2014.EatonAll.Rights.Reserved A Publication.No..TD00302001E February.2014Eaton.is.a.registered.trademark..All.other.trademarks.are.property.of.their. respective.owners.Technical.Data.TD00302001EEffective February 20143-Phase Loadcenter ProgramApproximate Dimensions in Inches (mm)Commercial Loadcenter KnockoutsNEMA T ype 1 Indoor Commercial EnclosuresKnockouts for Box Sizes 19, 20, 22, 24Code DiameterA0.50 (12.7)———B0.50 (12.7)0.75 (19.1)——C0.75 (19.1) 1.00 (25.4) 1.50 (38.1)—D 1.50 (38.1) 2.00 (50.8) 2.50 (63.5) 3.00 (76.2)E 2.00 (50.8) 2.50 (63.5) 3.00 (76.2)—F 2.50 (63.5) 3.00 (76.2) 3.50 (88.9)—NEMA T ype 3R Outdoor Commercial Enclosures Knockouts for Box Sizes 42, 43, 46, 47Code DiameterA0.50 (12.7)———B0.50 (12.7)0.75 (19.1)——C0.75 (19.1) 1.00 (25.4) 1.25 (31.8)—D 1.50 (38.1) 2.00 (50.8) 2.50 (63.5)—E 2.00 (50.8) 2.50 (63.5) 3.00 (76.2)—F 2.50 (63.5) 3.00 (76.2) 3.50 (88.9)—G 1.25 (31.8) 1.50 (38.1) 2.00 (50.8) 2.50 (63.5)H 3.25 (82.6) Sq.——Indoor Commercial Enclosures Outdoor Commercial EnclosuresBox 19, 20Box 42。

华邦(winbond)产品手册

Copyright 2005 Hengsen Technology. All Rights Reserved.
PRODUCT GUIDE ==Winbond、ISSI 授权香港及中国代理== 8 位单片宽工作电压系列
型号 ROM 型式 ROM RAM I/O 脚外扩存储器空间 64K 工作电压定时器/ 计数器 3 封装 Int 特殊功能 PDIP 6 CMOS 通用功能特殊 I/O 口 /INT2, /INT3,WDT 特殊 I/O 口 /INT2, /INT3,WDT 16 KB 掩膜 ROM W78L54 掩膜 16K 256 32/36 64K 5.5V - 1.8V 3 8 特殊 I/O 口 /INT2,/INT3,WDT W78L801 掩膜 4K 256 36 64K 5.5V - 1.8V 2 12 特殊 I/O 口,P1 口退出省电方式 WDT 可多次编程,特殊 I/O 口 / INT2, /INT3, WDT 可多次编程特殊 I/O 口 / INT2, /INT3, WDT 可多次编程特殊 I/O 口 / INT2, /INT3, WDT 可多次编程,可在线编程特殊 I/O 口/ INT2, /INT3 可多次编程,可在线编程 W78LE516 Flash EPROM 64K 512 32/36 64K 5.5V - 2.4V 3 8 特殊 I/O 口,/ INT2, /INT3, 可多次编程,可在线编程 W78LE365 Flash EPROM 64K 1280 32/36 64 K 5.5V - 2.4V 3 8 特殊 I/O 口/ INT2, /INT3,WTD,PWM 特殊 I/O 口 W78LE812 Flash EPROM 8K 256 36 64K 5.5V - 2.4V 3 14 P1 口退出省电方式 WDT,UART 40 44 44 40 44 44 40 44 44 40 44 44 40 44 44 40 PLCC 44 PQFP 44

罗克韦尔自动化 FLEX I O 远程 I O 适配器模块安装说明说明书

FLEX I/O Remote I/O Adapter Modules 1Publication 1794-IN098E-EN-P - January 2011Installation InstructionsFLEX I/O Remote I/O Adapter ModulesCat. No. 1794-ASB and 1794-ASBK Series E; 1794-ASB2, Series D(Modules with a K in the last position of the catalog number are conformally coated to meet noxious gas requirements of ISA/ANSI-71.040 1985 Class G3 Environment.)European Hazardous Location ApprovalThe following modules are European Zone 2 approved: 1794-ASB and 1794-ASBK Series E; 1794-ASB2, Series DDo not use these adapters (1794-ASB and 1794-ASBK Series E; 1794-ASB2, Series D) with the Classic PLC-5/15 or PLC-5/25 processors. Improper operation of the remote I/O can result.Important User InformationSolid state equipment has operational characteristics differing from those ofelectromechanical equipment. Safety Guidelines for the Application, Installation andMaintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at ) describes some important differences between solid state equipment and hard-wiredelectromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.Throughout this manual we use notes to make you aware of safety considerations.Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss.Identifies information that is critical for successful application and understanding of the product.Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you:•identify a hazard •avoid a hazard•recognize the consequenceEnvironment and EnclosureThis equipment is intended for use in a Pollution Degree 2 industrialenvironment, in overvoltage Category II applications (as defined in IEC 60664-1), at altitudes up to 2000 m (6562 ft) without derating.This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR 11. Without appropriate precautions, there may be difficulties with electromagnetic compatibility in residential and other environments due to conducted and radiated disturbances.This equipment is supplied as open-type equipment. It must be mounted within an enclosure that is suitably designed for those specific environmentalconditions that will be present and appropriately designed to prevent personal injury resulting from accessibility to live parts. The enclosure must have suitable flame-retardant properties to prevent or minimize the spread of flame, complying with a flame spread rating of 5VA, V2, V1, V0 (or equivalent) if non-metallic. The interior of the enclosure must be accessible only by the use of a tool.Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings that are required to comply with certain product safety certifications. In addition to this publication, see:•Industrial Automation Wiring and Grounding Guidelines, RockwellAutomation publication 1770-4.1, or additional installation requirements.•NEMA Standard 250 and IEC 60529, as applicable, for explanations of the degrees of protection provided by different types of enclosure.Preventing Electrostatic DischargeThis equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment:•Touch a grounded object to discharge potential static.•Wear an approved grounding wriststrap.•Do not touch connectors or pins on component boards.•Do not touch circuit components inside the equipment.•Use a static-safe workstation, if available.•Store the equipment in appropriate static-safe packaging when not in use.Power wiring must be less than 10 m (33 ft) in length.FLEX I/O is grounded through the DIN rail to chassis ground. Use zinc plated yellow-chromate steel DIN rail to assure proper grounding. The use of other DIN rail materials (for example, aluminum or plastic) that can corrode, oxidize, or are poor conductors, can result in improper or intermittent grounding. Secure DIN rail to mounting surface approximately every 200 mm (7.8 in.) and use end-anchors appropriately.Do not remove or replace an adapter module while power is applied.Interruption of the backplane can result in unintentional operation or machine motion.To reduce susceptibility to noise, power analog modules and digital modules from separate power supplies.European Zone 2 Certification (The following applies when the product bears the Ex Marking)This equipment is intended for use in potentially explosive atmospheres as defined by European Union Directive 94/9/EC and has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of Category 3 equipment intended for use in Zone 2 potentially explosive atmospheres, given in Annex II to this Directive.Compliance with the Essential Health and Safety Requirements has been assured by compliance with EN 60079-15 and EN 60079-0.Observe the following additional Zone 2 certification requirements:•This equipment is not resistant to sunlight or other sources of UV radiation.•This equipment must be installed in an enclosure providing at least IP54 protection when applied in Zone 2 environments.•This equipment shall be used within its specified ratings defined by Rockwell Automation.•Provision shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40% when applied in Zone 2 environments.•Secure any external connections that mate to this equipment by using screws, sliding latches, threaded connectors, or other means provided with this product.•Do not disconnect equipment unless power has been removed or the area is known to be nonhazardous.2 FLEX I/O Remote I/O Adapter Modules Publication 1794-IN098E-EN-P - January 2011North American Hazardous Location ApprovalThe following modules are North American Hazardous Location approved: 1794-ASB and 1794-ASBK Series E; 1794-ASB2, Series D.Remote I/O Adapter 1794-ASB/E, 1794-ASBK/E, 1794-ASB2/DThese adapters are shipped configured for standard addressing mode. InStandard Addressing Mode, the 1794-ASB(K) series E adapter can be used as a replacement for 1794-ASB series A and B remote I/O adapters, and the 1794-ASB2 series D can be used for a replacement for 1794-ASB2 series A 2-slot remote I/O adapters.Installing Your Adapter ModuleMount on a DIN rail before installing the Terminal Base Units1.Hook the lip on the rear of the adapter onto the top of the DIN rail,and rotate the adapter module onto the rail.2.Press the adapter module down onto the DIN rail until flush. Lockingtab C will snap into position and lock the adapter module to the DIN rail.3.If the adapter module does not lock in place, use a screwdriver orsimilar device to move the locking tab down while pressing theadapter module flush onto the DIN rail, and release the locking tab to lock the adapter module in place. If necessary, push up on the locking tab to lock.4.Connect the adapter wiring as shown under “Wiring” later in thisdocument.Mount or Replace the Adapter on an Existing System1.Remove the RIO plug-in connector from the front of the adapter.2.Disconnect any wiring jumpered to the adjacent terminal base.3.Open the module latching mechanism and remove the module fromthe base unit to which the adapter will be attached.4.Push the FlexBus connector toward the right side of the terminal baseto unplug the backplane connection. (When fully retracted, you will see a raised dot on the connector).5.Release the adapter locking tab and remove the adapter module.The following information applies when operating this equipment in hazardous locations:Informations sur l’utilisation de cet équipement en environnements dangereux:Products marked "CL I, DIV 2, GP A, B, C, D" are suitable for use in Class I Division 2 Groups A, B, C, D, Hazardous Locations and nonhazardous locations only. Each product is supplied with markings on the rating nameplate indicating thehazardous location temperature code. When combining products within a system, the most adverse temperature code (lowest "T" number) may be used to help determine the overall temperature code of the system. Combinations of equipment in your system are subject to investigation by the local Authority Having Jurisdiction at the time of installation.Les produits marqués "CL I, DIV 2, GP A, B, C, D" ne conviennent qu'à une utilisation enenvironnements de Classe I Division 2 Groupes A, B, C, D dangereux et non dangereux. Chaque produit est livré avec des marquages sur sa plaque d'identification qui indiquent le code de température pour les environnements dangereux. Lorsque plusieurs produits sont combinés dans un système, le code de température le plus défavorable (code detempérature le plus faible) peut être utilisé pour déterminer le code de température global du système. Les combinaisons d'équipements dans le système sont sujettes à inspection par les autorités locales qualifiées au moment de l'installation.EXPLOSION HAZARD•Do not disconnect equipment unless power has been removed or the area is known to be nonhazardous.•Do not disconnect connections to this equipment unless power has been removed or the area is known to be nonhazardous. Secure any external connections that mate to this equipment by using screws, sliding latches, threaded connectors, or other means provided with this product.•Substitution of components may impair suitability for Class I, Division 2.•IIf this product contains batteries, they must only be changed in an area known to be nonhazardous.RISQUE D’EXPLOSION•Couper le courant ou s'assurer que l'environnemen t est classé non dangereux avant de débrancher l'équipement.•Couper le courant ou s'assurer que l'environnement est classé non dangereux avant de débrancher les connecteurs. Fixer tous les connecteurs externes reliés à cet équipement à l'aide de vis, loquets coulissants, connecteurs filetés ou autres moyens fournis avec ce produit.•La substitution de composants peut rendre cet équipement inadapté à une utilisation en environnement de Classe I, Division 2.•S'assurer que l'environnement est classé non dangereux avant de changer les piles.Component Identification 1Remote I/O Adapter Module 6Remote I/O cable connector 2Indicators7+V DC connections 3Communication reset button (PRL)8-V common connections 4Access door to switches S1 and S29FlexBus connector5Switches S1 and S2 (behind door)If you insert or remove the module while backplane power is on, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding.If you connect or disconnect the communications cable with power applied to this module or any device on the network, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding.For Class I Division 2 applications, use only Class I Division 2 listed or recognized accessories and modules approved for used within the 1794 platform.During mounting of all devices, be sure that all debris (metal chips, wire strands, etc.) is kept from falling into the module. Debris that falls into themodule could cause damage on power up.FLEX I/O Remote I/O Adapter Modules 3Publication 1794-IN098E-EN-P - January 20116.Before installing the new adapter, notice the notch on the right rear ofthe adapter. This notch accepts the hook on the terminal base unit. The notch is open at the bottom. The hook and adjacent connection point keep the terminal base and the adapter tight together, reducing the possibility of a break in communication over the backplane.plete the adapter mounting as shown below.8.If the adapter module does not lock in place, use a screwdriver orsimilar device to move the locking tab down while pressing theadapter module flush onto the DIN rail, and release the locking tab to lock the adapter module in place. If necessary, push up on the locking tab to lock.9.Reinstall the module in the adjacent terminal base unit.Connect the Wiring1.Connect the remote I/O cable to the removable remote I/Oconnector.2.Connect +V DC power to the left side of the lower connector,terminal A .3.Connect -V common to the left side of the upper connector,terminal B .4.Connections C and D are used to pass +V DC power (D) and -Vcommon (C) to the next module in the series (if required).Set the Addressing Mode Switches1.Lift the hinged switch cover on the front of the adapter to expose theswitches.2.Set the switches as shown below.3.Cycle power to the adapter after setting the switches.Do not wire more than 2 conductors on any single terminal.ConnectTo terminal Blue Wire - RIO 1Shield Wire - RIO SH Clear Wire - RIO2If you connect or disconnect wiring while the field-side power is on, an electrical arc can occur. This could cause an explosion in hazardous location installations.Be sure that power is removed or the area is nonhazardous before proceeding.Push down and in at the same time to lock the adapter to the DIN rail.When the adapter is locked onto the DIN rail, gently push the FlexBus connector into the adapter to complete the backplaneIf this is the last adapter, you must terminate the remote I/O link here. Use a terminating resistor connected across terminals 1 and 2. Refer to your processor manual for information on the size of the resistor.WARNINGWhen you change switch settings while power is on, an electrical arc can occur. This could cause an explosion in hazardous location installations. Be sure that power is removed or the area is nonhazardous before proceeding.ATTENTIONSome switches on this adapter differ from the switches on previous versions. Make certain that you identify each switch before setting.8 and 16-point Mode Switch SettingsWhen using this addressing modeAndMode Switch 2 S1-1Mode Switch 1 S2-5Mode Switch 0 S2-8Standard (as shipped)8 and/or 16-point modulesSee note 1ON ON Compact8-point modules OFF ON OFF 16-point modules ONONOFFComplementary See complementary table below.Primary Chassis 8-point modules OFFOFF ON Complementary ChassisONOFF ON Complementary See complementary table below.Primary Chassis 16-point modules OFF OFF OFF Complementary ChassisON OFF OFF 1In Standard mode, this switch retains its function as switch position 1 of rack addressing. In standard mode, the module is functionally interchangeable with 1794-ASB series A or B adapters.2In compact mode, 32-point modules appear as 8 or 16-point modules.3When programming block transfers, address analog modules as module 0 if switch S1-1 is on; module 1 if switch S1-1 is off.32-point Mode Switch SettingsWhen using thisaddressing modeAndMode Switch 0 S2-8Mode Switch 1 S2-5Mode Switch 2 S1-1ModeSwitch 3 S2-3Mode Switch 4 S2-4Standard – 328, 16 and/or 32-point modulesONONSee note 1OFFOFFComplementary – 324 FLEX I/O Remote I/O Adapter ModulesPublication 1794-IN098E-EN-P - January 2011Primary Chassis 8, 16 and/or 32-point modulesOFF OFF OFF OFF OFF Complementary ChassisOFF OFF ON OFF OFF 1In Standard – 32 mode, any module in the chassis occupies 32 input points and 32 output points in the input/output data table.2In Complementary – 32 mode, any module in the chassis occupies 32 input points or 32 output points in the input/output data table. If using 8 or 16-point modules,unused points in the data table are zeroed out.First I/O Group 1) (see Important)I/O Rack Number S1-8S1-7I/O Group S1-6…S1-1ON ON 0 (1st)Refer to addressing modetables.OFF ON 2 (2nd)ON OFF 4 (3rd)OFF OFF 6 (4th)1) In 32-point mode, starting quarter must be 0 (S1-8 and S1-7 on).S2-8Mode Switch 0Refer to mode selection switches, above.S2-7Hold Inputs S2-6Rack Fault Select ON Hold inputs ON Disabled (default)OFF Reset inputs OFF EnabledS2-5Mode Switch 1Refer to mode selection switches, munication Rate (32-point Mode Select)Processor Restart Lockout Hold Last State S2-4S2-3Bits/s S2-2S2-1ON ON 57.6k ON Restart ON Reset Outputs OFF ON 115.2k OFFLocked outOFFHold Last StateON OFF 230.4k OFFOFFAuto BaudUse only with 32-point modules.1)These switches used to put the adapter in 32-point mode and perform autobaud.1)Cycle power to the adapter or push the RESET button when the baud rate is changed in the scanner.32-point Mode Switch SettingsWhen using thisaddressing modeAndMode Switch 0 S2-8Mode Switch 1 S2-5Mode Switch 2 S1-1ModeSwitch 3 S2-3Mode Switch 4 S2-4FLEX I/O Remote I/O Adapter Modules 5Publication 1794-IN098E-EN-P - January 2011Complementary I/O Rack Number Switch Settings for PLC-5 Processors(refer to your processor documentation for all other processors) SpecificationsPrimary RackRack Number S1 Switch Position 1747-SN PLC-5654321Rack 0Not Valid ON ON ON ON ON OFF Rack 1Rack 1OFF ON ON ON ON OFF Rack 2Rack 2ON OFF ON ON ON OFF Rack 3Rack 3OFF OFF ON ON ON OFF Rack 4ON ON OFF ON ON OFF Rack 5OFF ON OFF ON ON OFF Rack 6ON OFF OFF ON ON OFF Rack 7OFFOFFOFFONONOFFComplementary RackRack Number S1 Switch Position 1747-SN PLC-5654321Rack 0Not Valid ON ON ON OFF ON ON Rack 1Rack 1OFF ON ON OFF ON ON Rack 2Rack 2ON OFF ON OFF ON ON Rack 3Rack 3OFF OFF ON OFF ON ON Rack 4ON ON OFF OFF ON ON Rack 5OFF ON OFF OFF ON ON Rack 6ON OFF OFF OFF ON ON Rack 7OFFOFFOFFOFFONONSpecifications – 1794-ASB/E, 1794-ASBK/E, and 1794-ASB2/D1794-ASB/E, 1794-ASBK/E1794-ASB2/DI/O capacity 8 modules 2 modulesPower supplyPower supply must be capable of providing a turn-on inrush surge current of 23 A (at 24V DC) for 2 ms for each adapter connected to the power supply.Input voltage range 19.2V…31.2 V DC, 450 mA Output voltage 5V DC, 640 mA Communication rate 57.6 Kbps 115.2 Kbps 230.4 KbpsIndicators Power – green; Adapter active – green; Adapter fault – red; Local fault – redDimensions (H x W x D)87 x 69 x 69 mm 3.4 x 2.7 x 2.7 inchesIsolation voltage 50V (continuous), Basic Insulation TypeType tested at 750V DC for 60 s, power to system, power to RIO, and RIO to systemCurrent draw330 mA at 24V DC; 450 mA max Power dissipation, max 4.6 WThermal dissipation, max1.7BTU/**********Enclosure type rating None (open-style)Wire sizePower and RIO connections:Single wire connection: 0.33... 2.5 mm 2 (22...12 AWG) solid or stranded copper wire rated at 75 °C (167 °F ) or greater 1.2 mm (3/64 in.) insulation maxDouble wire connection: 0.33... 1.3 mm 2 (22...16 AWG) solid or stranded (not intermixed) copper wire rated at 75 °C (167 °F ) or greater 1.2 mm (3/64 in.) insulation max Wire category (1)(1)Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.3 – on power ports2 – on communications ports Terminal screw torque 0.8 Nm (7 lb-in.)Remote I/O cable Belden 9463 or equivalent Remote I/O connector plugPart number 942029-03North American temp codeT4A IEC temp codeT4Publication 1794-IN098E-EN-P - January 2011 Supersedes Publication 1794-IN098D-EN-P- March 2005Copyright © 2011 Rockwell Automation, Inc. All rights reserved.Mounting DimensionsEnvironmental Conditions Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0…55 °C (32…131 °F)Temperature,surrounding air, max 55 °C (131 °F)Temperature, nonoperatingIEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold), IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat), IEC 60068-2-14 (Test Na, Un-packaged Non-operating Thermal Shock):-40…85 °C (-40…185 °F)Relative humidity IEC 60068-2-30 (Test Db, Un-packaged Damp Heat):5…95% non-condensingVibration IEC60068-2-6 (Test Fc, Operating): 5 g @ 10…500 HzShock, operating IEC60068-2-27 (Test Ea, Unpackaged shock): 30 gShock, nonoperating IEC60068-2-27 (Test Ea, Unpackaged shock): 50 gEmissions CISPR 11:Group 1, Class A (with appropriate enclosure)ESD immunity IEC 61000-4-2: 8 kV air discharges Radiated RF immunityIEC 61000-4-3:10 V/m with 1 kHz sine-wave 80%AM from 80…2000 MHz 10 V/m with 200 Hz 50% Pulse 100%AM at 900 MHz 10 V/m with 200 Hz 50% Pulse 100%AM at 1890 MHz 3 V/m with 1 kHz sine-wave 80%AM from 2000…2700 MHz EFT/B immunity IEC 61000-4-4:±2 kV at 5 kHz on power ports±2 kV at 5 kHz on communications ports Surge Transient Immunity IEC 61000-4-5:±2 kV line-earth(CM) on communications ports Conducted RF ImmunityIEC 61000-4-6:10 Vrms with 1 kHz sine-wave 80%AM from 150 kHz…80 MHzCertifications (when product is marked)(1)c-UL-usUL Listed Industrial Control Equipment, certified for US and Canada. See UL File E65584.UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E194810.CSA CSA Certified Process Control Equipment. See CSA File LR54689C.CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations. See CSA File LR69960C.CEEuropean Union 2004/108/EC EMC Directive, compliant with: EN 61326-1; Meas./Control/Lab., Industrial Requirements EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial EmissionsEN 61131-2; Programmable Controllers (Clause 8, Zone A & B)C-Tick Australian Radiocommunications Act, compliant with: AS/NZS CISPR 11; Industrial EmissionsExEuropean Union 94/9/EC ATEX Directive, compliant with:EN 60079-15; Potentially Explosive Atmospheres, Protection "n" EN 60079-0; General Requirements II 3 G Ex nA IIC T4 XPublicationsInstallation Instructions 1794-IN098; User Manual 1794-UM009(1)See the Product Certification link at for Declarations of Conformity, Certificates, and other certificationdetails.。

IntelliPack 800系列双报警热电偶和毫伏输入说明书

I n t e l l i P a Intelligent Alarms822A Dual AlarmS i g n a l C o nOptional terminal blocks: barrier strip (left) andspring clamp (right). Cage clamp terminal is standard.I n t e l l i P aS i g n a lC o n I Ordering Information5020-350: AC current sensorBarrier strip (left) and spring clamp (right).I Ordering InformationAC Current Sensor50W SupplyInput Power Requirement85 to 264V AC or 105 to 370V DCOutputDIN-Rail MountingFor your convenience, Acromag offers several mounting accessories to simplify your system installation. Our 19” rack-mount kit provides a 16.7 inches (425mm)3-position:L = 0.66 inches (16.9 mm)6-position:L = 1.26 inches (32.3 mm)Spring Clamp Terminal BlocksTBK-B01Terminal block kit, two 6-position pieces TBK-B02Terminal block kit, four 6-position piecesTBK-B03Terminal block kit, one 3-position and three 6-position pieces3-position: L = 0.87 inches (22.3 mm)6-position: L = 1.47 inches (37.7 mm)Wire range: AWG #12-26Wire range: AWG #12-26Wire range:AWG #12-26TBK-S01Terminal block kit, two 6-position pieces TBK-S02Terminal block kit, four 6-position piecesTBK-S03Terminal block kit, one 3-position and three 6-position piecesMounting Hardware Power SuppliesData Rate: Up to 115.2Kbps RoHS-compliant PC Requirements:Windows® 7 and newerI Ordering Information 4001-095: USB-to-Serial adapter800A ModelsSingle input models801A: Universal temperature input (thermocouple, RTD, or DC millivolts); One DPDT relay or two SPDT relays 811A: DC voltage/current* input; One DPDT relay or two SPDT relays Dual input models812A: DC volt./current* inputs; Two SPDT relays 822A: Thermocouple inputs; Two SPDT relays 832A: RTD inputs; Two SPDT relays *AC current sensor option available.IntelliPack alarms compare inputs against user-defined limit setpoints to control built-in relays.Each unit offers a selection of input ranges and alarm functions to handle a broad range of applications. As your needs change, you can easily reconfigure the unit for different ranges or functions. Alarm functions available on all models include on/off controller, limit alarm, window alarm, deviation alarm, rate-of-change alarm, and peak/valley detection. Other functions are also possible; please consult the factory.Setup is very easy. IntelliPack alarms are config-ured through a user-friendly Windows XP/Vista/7 program. Field adjustments and recalibration are quickly performed with front-panel push-buttons and status LEDs. Once configured, IntelliPacks operate independent of any host computer.Key Features & BenefitsGeneral Operation■Advanced microcontroller has integrated,downloadable flash memory and EEPROM for intelligent signal processing.■Windows XP/Vista/7 software configuration speeds setup and replacement.■Push-button reprogrammability facilitates changes in the field without a host PC.■Plug-in terminal blocks make module installation and removal easy.■Built-in self-diagnostic routines operate upon power-up and during operation for easy maintenance and troubleshooting.■3-way isolation separates inputs, power, and relay contacts from each other.■EMC compliant. Ruggedized circuitry meets directives to provide increased transient immunity and low emissions.■Wide ambient temperature range ensures reliable performance from -25 to 70°C.■Wide DC supply range with diode-coupled reverse polarity protection is useful for redundant supplies and battery backup.Alarm Operation■Multi-purpose inputs accept numerous ranges to reduce spare stock requirements.■User-programmable alarm operation lets you select or change alarm functions(see next page for supported functions).■Dual alarm operation lets you perform two alarm functions at the same time.■High-resolution Sigma-Delta A/D converter delivers high accuracy with low noise.■Input excitation supply on each input provides power for a two-wire transmitter.■High-power relays switch voltages up to 230V AC at 5A.■User-programmable deadband (100%)on each setpoint eliminates relay chatter and prolongs contact life.■User-programmable relay reset enables automatic alarm reset or latching alarm with manual reset.■Failsafe/non-failsafe operation lets you set the default relay position.■Relay delay feature lets you set the reaction time to filter transients.■Thermocouple and RTD signal processing performs linearization, up/downscale break detection, reference-junction compensation and other functions.Universal Temperature Input ◆ DC Voltage/current Input ◆ Thermocouple Input ◆ RTD InputA property sheet to configure a window alarm. Limit alarms and on/off controllers are similar. A property sheet to configure a deviation alarm. Positive, negative, and absolute deviation alarms are supported. Typical applications: speed tracking/monitoring, consistent batch temperature measurement, flow leak detection.Peak/Valley AlarmsRate-of-Change AlarmsA property sheet to configure a peak/valley alarm. Typical applications: force measurement, pressure testing, chemical mixing.A property sheet to configure a rate-of-change alarm. Typical applications: injection molding, speed sensing, monitoring chemical reactions。

OrionNET v3.5产品发布摘要-2022年11月说明书

OrionNET v3.5 Release Summary November 2022CTES™ OrionNET™ v3.5 is now available. Customers with current software maintenance contracts will have access to this new version of OrionNET. New Features• Dark mode• LDT auto-push. All channels pushed to Max Completions• New Manual & Derived System Channels• Predefined Comments updatedEnhancementsLDT Auto-push:• First-time setup through the Configuration Utility is required to confirm the setting• If updating OrionNet, the Max Unit/Rig ID will be remembered otherwise it defaults to “None” for a new install• No longer will you have to select channels to transmit, all channels are transmitted• Go to Setup > Settings to check if LDT is turned onNew Manual & Derived System Channels:• Manual channels are set from the Job Setup section under Comments, which are used to calculate derived channels• Custom Manual Channels can be created from comments.• Ex. FR Rate > Add the channel in System Channel as a data channel. A popup window will appear when the FR Rate Comment is clicked, and the value entered will populate in the FR Rate data windowPredefined Comments Updates:• Predefined comments are loaded from Max Completions• Predefined comments are based on selected Service Line within the Configuration UtilityUpgrade to OrionNET v3.5OrionNET users with a valid software maintenance contract may download the current version from /ctes. Downloading OrionNET v3.51.Navigate to the CTES software download center: https:///CustomerPortal/ProductDownloadsa.Input your Username and Password to access the appropriate file.b.To obtain password information or to renew a software license, contact CTES for assistance:+1.936.777.6200 or ****************.2.Run the CTESOnet35.exe file to install the softwareActivating OrionNET v3.51.License OrionNET Software on Your Computera.Click the OrionNET icon on your desktop OR find the OrionNET app in your Start menub.If this is the first time OrionNET is run, the user must obtain authorization for this copy. You will beprovided instructions for gaining authorization via the software start screen.Activating Cerberus v14.5License Cerberus Software on Your Computer1.Click the Cerberus icon on your desktop OR find the Cerberus app in your Start menu2.If this is the first time Cerberus is run, the user must obtain authorization for this copy of Cerberus. You will beprovided instructions for gaining authorization via the software start screen.Obtaining Max Completions Credentials1.Your company administrator will need to set up your access in Max Completions initially2.As a new user go to , click on Sign In, click on Register Hereplete the Register Account window and click the Register button.4.Log in to the email account to Verify Email Address and Activate the AccountRecommended Computer Specifications for OrionNETSoftware Operation System Windows 10Processor 8th Gen i5 or betterRAM 16 GB with OrionNETAvailable Storage 10 GBDisplay Resolution 1440 x 900HMI Keyboard & Mouse or Touch Screen.NET Framework 4.5。

Nuvoton M051 Series 32-bit NuMicro Family BSP目录说明书

Directory Introduction for 32-bit NuMicro ™ FamilyDirectory InformationThe information described in this document is the exclusive intellectual property ofNuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.Nuvoton is providing this document only for reference purposes of NuMicro microcontroller based system design.Nuvoton assumes no responsibility for errors or omissions.All data and specifications are subject to change without notice.For additional information or questions, please contact: Nuvoton Technology Corporation.M051 Series BSP DirectoryFor sample code mentioned in this document, please download M051 series (M052/M054/M058/M0516) BSP from the link below or check other related application sample code./NuSoftware1Document Information2 Library Information3 Sampel Code Information4 \SampleCode\RegBased5 \SampleCode\StdDriverImportant NoticeNuvoton Products are neither intended nor warranted for usage in systems or equipment, any malfunction or failure of which may cause loss of human life, bodily injury or severe property damage. Such applications are deemed, “Insecure Usage”.Insecure usage includes, but is not limited to: equipment for surgical implementation, atomic energy control instruments, airplane or spaceship instruments, the control or operation of dynamic, brake or safety systems designed for vehicular use, traffic signal instruments, all types of safety devices, and other applications intended to support or sustain life.All Insecure Usage shall be made at customer’s risk, and in the event that third parties lay claims to Nuvoton as a result of customer’s Insecure Usage, custome r shall indemnify the damages and liabilities thus incurred by Nuvoton.。