Pm-postprocessor
美国Eaton公司产品：高速工业网关卡X2卡说明书
Eaton Gigabit Industrial Gateway X2 CardIndustrial gateway cardThe Eaton Gigabit IndustrialGateway X2 Card (INDGW-X2) is Eaton’s latest UPS connectivity device that delivers industrial professionals with new andexciting capabilities and features. The first UPS network card to meet both UL 2900-1 and IEC 62443-4-2 cybersecurity standards, the Gigabit Industrial Gateway X2 Card improves power system reliability by providing warnings of pending issues to administrators and helping to perform orderly graceful shutdown of servers and storage. The new network card works with Intelligent Power Manager (IPM) v1.61 (and higher) to improve business continuity by triggering policies configured to keep missioncritical applications running in the event of power or environmental anomalies, including virtualmachine relocation or automated disaster recovery action.Details• G igabit speed: compatible with better performing, cost effective and widely deployed gigabit network switches • C ompliance with Gigabit only data center networks• C ybersecurity enhancements for UL 2900-1 and IEC 62443-4-2 certifications,including stronger encryption, configurable passwordpolicy and X.509 Public Key Infrastructure• R eal-time clock with battery backup and linkage to NTP (Network Time Protocol) server• I ncreased memory for improved operation and larger data storage• A dvanced Management with RESTful API over HTTPS • S ecure SMTP for email alertsEaton1000 Eaton Boulevard Cleveland, OH 44122 United States © 2021 EatonAll Rights Reserved Printed in USA BR152075EN / GG October 2021Eaton is a registered trademark.All other trademarks are property of their respective owners.Optional monitoring probeEaton is also offering a new Environmental Monitoring Probe (EMP) Gen 2 (EMPDT1H1C2), an environmental monitoring probe with sensors (temperature, humidity and dry-contact monitoring) and the ability to be daisy-chained (up to 3 per host), allowing multiple sensorconnection to a single host. The probe is compatible with the Gigabit Industrial Gateway X2 Card and Eaton rackPDUs including G3 (firmware 4.x or later), G3HD and G3+.Technical specifications 1Eaton Gigabit Industrial Gateway X2 CardFunction Web/Industrial communicationsHardware compatibility BladeUPS, 9155, 9355, 9395, 9395P , 9395C Compatible with IPv4/IPv6 TLS 1.2Catalog number INDGW-X2Protocol support HTTPS, TLS 1.2, SNMPv1, SNMPv3, NTP , TFTP , SMTP , SMTPS,B OOTP , DHCP , SLAAC, SSH, MQTTS, ModbusTCP , Modbus RTU, BACnet IP , BACnet BBMD UPS slot type X-SlotNetwork support Ethernet 10/100/1000BaseTTemperature and Yes, only with the Eaton Environmental Monitoring humidity monitoring Probe Gen 2Software supportI ntelligent Power Manager 1.61 and higher (visit /IPM for all power management capabilities including hyperconverged infrastructure), Intelligent Power Protector 1.61 and higher (visit /IPP for a full compatibility operating system matrix), any SNMP compliant Network Management System (NMS)Supported MIB MIB II – Standard IETF UPS MIB (RFC 1628) – Eaton xUPS MIB Supported browsersC hrome and Firefox Local language support English, French, German, Italian, Spanish, Chinese Simplified,Chinese Traditional, Japanese, Russian Operating temperature 32 to 104° F (0 to 40° C)Operating humidity 90% RH max. without condensation Power input 5 V – 12 VCurrent consumption 500/1000mA max. depending on UPS Dimensions (H x W x D) 4.4 x 1.5 x 4.5 in. (112 x 38 x 115 mm)Weight 4.6 oz. (131 g)RegulatorySame as UPSFor more information, please visit:/INDGW-X21. D ue to continuous product improvements, program specifications are subject to change without notice.Follow us on social media to get thelatest product and support information.Eaton Gigabit IndustrialGateway Card (installed)Eaton Gigabit IndustrialGateway X2 Card (front)。
极限交换机VDX6740和VDX6740T产品介绍说明书
The VDX 674 0 T-1G ( Fig ure 3) offers 4 8 10 0 0 BA SE-T p ort s and t w o 4 0 Gb E QSFP+ p ort s. Each 4 0 Gb E p ort can b e b roken out int o four ind ep end ent 10 Gb E SFP+ p ort s, p rovid ing an ad d it ional eig ht 10 Gb E SFP+ p ort s for up link. A ll 4 8 10 0 0 BA SE-T p ort s can b e up g rad ed t o 4 8 10 GBA SE-T p ort s via t he Cap acit y on Dem and (CoD) soft w are license. Tw o 4 0 Gb E p ort s are enab led as p art of t he b ase license. The ad d it ional t w o 4 0 Gb E p ort s can b e up g rad ed via t he Port s on Dem and ( PoD) soft w are license.
- Meet s t od ay?s ap p licat ion d em and s w it h high perform ance and low latency
- Delivers line-rate t hroughput for all p ort s and p acket sizes
Dat a Sheet
海康威视 HPM 系列产品维护指南说明书
Lifecycle Solutions & ServicesPreventive Maintenance Tips: Power Systems 1It Doesn’t Run Without Power—Proper Maintenance of Power SystemsMaintaining the power system is critical for any of your systems and that is definitely true when dealing with the PM/APM/HPM (xPM) family. Depending on your configuration and process, the failure of proper maintenance practices and ignoring alarms from the power system could lead to failures that have the potential to bring a process or plant to a standstill. This includes loss of view, loss of control, or even loss of the process.How Proper Power System Maintenance Can Help You• Reassurance that your power system and battery back-ups are running properly • Reduced risk of downtime due to power system issues • Allows you to be proactive in your maintenance approach • Simplified ordering for maintenance items available in a kit versus individual components • Lower cost of replacement to mitigate costly unplanned system downtime• Current version of Power Supply has multiple improved characteristicsProper maintenance of the power system includes addressing the power supplies, battery backup and the CMOS memory backup batteries. The expected lifespan of each of these components is different and the lifespan of each is also affected by the environment in which they are used. Benchmarks for changing out each component are every 10 years for the power supply, every five years for the battery backup (and possibly every three), and every two years for the CMOS batteries. Honeywell now offers an upgrade kit, MC-ZPSUG2, which provides all of these components packaged together. The power supply provided is the current version with improved characteristics.Any failures of these power system components should be changed immediately.DescriptionLifeExpectancyReplacement Part #Power Supply 10 years 51198651-100 48V Battery Backup 3 to 5 years 51303948-100 Size “AA” Ni-Cad CMOS Battery 2 years 51190422-100 Size “C” Ni-Cad CMOS Battery2 years51192060-100CMOS Memory Battery BackupThe xPM power systems are designed to provide battery backup to all the CMOS memory. The CMOS battery backup prevents the loss of the data base during a power outage after the battery backup has been depleted or if no battery backup module is present. There are two different power system chassis out in the field with CMOS batteries. The older style power system introduced with PM/APM requires three specific “AA” size Ni-Cad batteries. For the current back panel introduced for HPM the CMOS memory requires three specific “C” size Ni-Cad batteries. The size “C” batteries are required if the full 50 hours of CMOS memory backup is desired for HPM due to the larger memory available in HPM. In either scenario, the incorrect usage of other batteries than what have been tested and qualified by Honeywell may result in the battery overheating and could possibly cause the battery to rupture.The batteries in the standard power system are periodically tested by the charging circuit. If the voltage falls below the allowed limit, a battery failure alarm will be generated and the batteries should be replaced. Regardless of alarms, Honeywell recommends that new batteries be installed every two years. All three batteries should be replaced at one time.DescriptionReplacement Part #Size “AA” Ni-Cad CMOS Battery51190422-100 Size “C” Ni-Cad CMOS Battery 51192060-100Preventive Maintenance Tips: Power Systems 2 48 Volt Battery BackupThe battery backup is designed to maintain a fully loaded xPM fora minimum of 20 minutes. It will shutdown when the voltage reaches38 volts to prevent the power supply from going out of regulation and an alarm will be generated. Rechargeable batteries will lose their full charging capabilities over time and will need to be tested and replaced when they fall below 60 percent of their original capacity.The battery backup has been designed to operate in standby (float) service for approximately five years. The five years is based on the battery being kept at 20C (68F) and the float charge voltage being maintained between 2.25 and 2.30 volts per cell. This includes the battery being fully discharged once every three months. No battery should be left in service over five years, and if no maintenance is done it should be replaced every three years.The service life is directly affected by the number of discharges, the depth of discharge, ambient temperature, and the charging voltage. The expected service life can be shorted by 20% for each 10C that the ambient is above 20C.The batteries should never be left in a discharged state. This allows sulfating to occur which will increase the internal resistance of the battery and lower its capacity. The self-discharge rate is about 3% per month at an ambient of 20C. The self discharge rate doubles for each 10C in ambient above 20C. The discharged voltage of the battery should never go below 1.30 volts to maintain the best battery life.With this in mind it is recommended to periodically load test the batteries to ensure they have sufficient capacity to maintain the system during a power outage. Tests should be done on an annual basis and more frequently as they become older and begin to lose capacity. The load test is recommended off-process if possible as there will be no battery backup available while performing the test and recharging of the battery pack can take up to 16 hours. Having a spare available to swap, especially if doing on process, is a wise option leading to minimal time without battery backup and allowing the tested battery to be recharged on a bench outside the system for future swap with the next test.If regular maintenance is not performed the recommendation is to change at least every three years rather than every five.Power SuppliesThe power supply is the heart of the xPM power system and the recommendation is for a redundant power supply configuration having each power supply fed by its own dedicated power source. Honeywell has introduced the next generation power supply for this family which increases the robustness of the power system. Even with redundant power supplies, one must be careful when changing out a failed power supply. This is to minimize disturbance of the environment and to reduce the introduction of particles into the area around and near the power supplies. Those particles can be pulled through the airflow of the working power supply and result in the second power supply failing.For this reason, Honeywell does not recommend replacing a working power supply on-process (other than the black-colored version). However, power supplies do not last forever and you should consider upgrading older power supplies, or prepare to do so, when the opportunities arise.The recommendation for changing out the power supplies is every ten years and this replacement should be included during a scheduled down time if possible. The power supply replacement procedure listed in the Honeywell xPM Service manual should be followed at all times.Recommend Change of Original Black Power SuppliesIn October of 1996 Honeywell issued a customer priority notification (PN #1986) about a possible over-voltage issue with the black-colored (51109456-200) power supplies that were sold from 1988 through 1994. The Honeywell recommendation was to change out those black power supplies with the new silver version. Honeywell still recommends and strongly suggest that these black power supplies be replaced with the current power supply under part number 51198651-100 regardless of when they were put into service.Silver Power SuppliesThere have been three part number versions of the silver power supplies. The first (51109684-100/300) was sold from 1993 through 1997. The second (51198947-100) sold from 1997 through today. The next generation power supply was released in early 2009 and was introduced initially through the power system maintenance upgrade kit. If a site is running the original silver version they have now been in service for over 10 years and sites should consider the need to replace before they are forced to do so by failure of the power supply. Note that there is always risk involved when powering down equipment and possible issues when the equipment is powered back up. As stated previously, it is recommended to change these out off-process if possible. Replacements on- process should be done only when a power supply fails and replacement is then required immediately.Description Replacement Part #48V Battery Backup51303948-100Preventive Maintenance Tips: Power Systems 3Power Supply IssuesThe xPM power supplies have proven to be a reliable and robust power source. However, as with any electrical component they do not last forever and there is the potential for failure modes. Issues such as foreign particles introduced have already been discussed. In addition, even clean environments are susceptible to whiskers which have the potential to short out active circuits. Whiskers are a real issue and further details may be found in the Customer Resource Manual (CRM) in the Process Manager section PD22_G97(G).The new power supply available through the power system maintenance kit includes design improvements specifically done to address some of these possible failure modes to make a robust power supply even better.Remember that the power supply is a critical component to your system and regular maintenance as well as having spares available is highly recommended to keep your site running without problems. Monitor the power system alarms and take action when they do occur.DescriptionReplacement Part #Power Supply51198651-100Preventive Maintenance Tips: Power Systems 4Importance of Power System AlarmsAlways ensure that all power supply alarm contacts are properly implemented, working, and are being monitored. Failure to monitor these alarms and take appropriate action in a timely manner can lead to failures of the power system that could have otherwise been prevented. There are DC Out, Battery, Fan/Temp, AC In, and Charging LED indicators for each Power Supply module. If the Power system is fully functional, all five of the indicators are illuminated. In addition, each of these conditions, plus a CMOS/Memory is available as a digital input for each supply.DC Out IndicatorIf a DC Out LED is off, AC line power has been lost (check the AC In LED) or the Power Supply Module has failed. If the Power System is non-redundant, or if both DC Out LEDs are off, the HPM has lost 24 VDC. The CMOS backup system maintains power to the CMOS memory, so subsystem programs are not lost. See the Battery LED description below. The annunciator contact illustrated in the following figure will open when these conditions occur.Battery IndicatorIf the Battery LED is off and the Charging LED is on, the 48 Volt Battery switch is in the off position or the 48 V Battery Backup system has failed. The annunciator contact illustrated in the following Figure will open when these conditions occur. If the Power System does not have the battery pack option, the Battery LED will normally be on, and the Charging LED will normally be on.Fan/Temp IndicatorIf the Fan/Temp LED is off, the fan in the Power Supply Module has failed or the temperature of the supply has exceeded a safe value. The annunciator contact, discussed below, is activated.AC In IndicatorIf the AC In LED is off, AC power to the HPM has been lost or the switch on the Power Supply Module is off. Backup systems, if operating, are maintaining the unit. Check the DC Out and Battery indicators to determine the state of the system. Many installations may have the Power Supply Modules connected to separate AC power sources to minimize outage caused by a power loss. The Annunciator contact signifying power loss from either supply, are opened independently.Charging IndicatorWhen the Charging LED is off, the charging circuit that maintains the optional 48 V Battery Backup system has failed. Check the batteries, their corresponding connections, and the charging circuits in the Power Supply Module(s). The annunciator contact output is opened by this condition.For More InformationLearn more about how Honeywell’s Preventive Maintenance Tips can limit downtime and assure system power supplies and battery backups are working properly visit our website or contact your Honeywell account manager. Honeywell Process Solutions Honeywell1250 West Sam Houston Parkway South Houston, TX 77042Honeywell House, Arlington Business Park Bracknell, Berkshire, England RG12 1EB Shanghai City Centre, 100 Junyi Road Shanghai, China 20051 AlarmsThe primary Power Supply Module alarm and secondary Power Supply Module alarm contacts monitor five functions within each Power Supply Module. The appropriate contact will open when any of the following occur:• The DC output voltage is not within normal limits. • AC input power to the supply has failed.• The Power Supply Module electronics have overheated or the Power Supply Module fan has failed. • The 48 V backup-battery system has failed because the batteries have discharged or they have been disconnected. • The battery charger in the Power Supply Module has failed.Servicing the Power SystemThe power system is critical to your process. Loss of the power system may lead to loss of control, loss of view, or loss of process. Honeywell strongly recommends regular maintenance to the power system and service checks with regular component replacements performed by Honeywell trained service technicians. • Options for Power System Upgrade/Maintenance • Order the power system upgrade kit• Order replacement parts for immediate installation. • Order spares to have in stock as needed.• Add power system components to a parts contract.Preventive Maintenance Tips: Power Systems 5Orderable Power System Components• CMOS Batteries • 48V Battery Backup • Power Supply• Power System Chassis AssemblyBenefits of New Power Supply• Improved airflow handling• Conformal coating of all metallic components • Enhanced mechanical design • Extended temperature range • Added thermal shutdown capability • More reliable power switch design • More consistent alarm handlingAdditional Power System InformationAdditional details on proper maintenance procedures such as load testing and specifics on the power supplies and batteries may be found in the Honeywell Customer Resource Manual. This is located in the Process Manager section of the CRM under TAB 22. As always, you may also contact your local Honeywell account manager or service technician for further details.SV-12-37-ENG May 2012© 2012 Honeywell International Inc.。
Net Customisation User Guide
.NET Customization User GuideAVEVA Solutions LtdDisclaimerInformation of a technical nature, and particulars of the product and its use, is given by AVEVA Solutions Ltd and its subsidiaries without warranty. AVEVA Solutions Ltd and its subsidiaries disclaim any and all warranties and conditions, expressed or implied, to the fullest extent permitted by law. Neither the author nor AVEVA Solutions Ltd, or any of its subsidiaries, shall be liable to any person or entity for any actions, claims, loss or damage arising from the use or possession of any information, particulars, or errors in this publication, or any incorrect use of the product, whatsoever.CopyrightCopyright and all other intellectual property rights in this manual and the associated software, and every part of it (including source code, object code, any data contained in it, the manual and any other documentation supplied with it) belongs to AVEVA Solutions Ltd or its subsidiaries.All other rights are reserved to AVEVA Solutions Ltd and its subsidiaries. The information contained in this document is commercially sensitive, and shall not be copied, reproduced, stored in a retrieval system, or transmitted without the prior written permission of AVEVA Solutions Ltd Where such permission is granted, it expressly requires that this Disclaimer and Copyright notice is prominently displayed at the beginning of every copy that is made.The manual and associated documentation may not be adapted, reproduced, or copied, in any material or electronic form, without the prior written permission of AVEVA Solutions Ltd. The user may also not reverse engineer, decompile, copy, or adapt the associated software. Neither the whole, nor part of the product described in this publication may be incorporated into any third-party software, product, machine, or system without the prior written permission of AVEVA Solutions Ltd, save as permitted by law. Any such unauthorised action is strictly prohibited, and may give rise to civil liabilities and criminal prosecution.The AVEVA products described in this guide are to be installed and operated strictly in accordance with the terms and conditions of the respective licence agreements, and in accordance with the relevant User Documentation. Unauthorised or unlicensed use of the product is strictly prohibited.First published September 2007© AVEVA Solutions Ltd, and its subsidiaries 2007AVEVA Solutions Ltd, High Cross, Madingley Road, Cambridge, CB3 0HB, United KingdomTrademarksAVEVA and Tribon are registered trademarks of AVEVA Solutions Ltd or its subsidiaries. Unauthorised use of the AVEVA or Tribon trademarks is strictly forbidden.AVEVA product names are trademarks or registered trademarks of AVEVA Solutions Ltd or its subsidiaries, registered in the UK, Europe and other countries (worldwide).The copyright, trade mark rights, or other intellectual property rights in any other product, its name or logo belongs to its respective owner.AVEVA .NET CustomizationContents Page.NET Customization User GuideIntroduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1:1 About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 .NET Customization Architecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1 Common Application Framework Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:2 Database Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:2 Geometry Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:3 Shared Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:3 Utilities Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 Graphics Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 Sample Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 AttributeBrowserAddin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 ExamplesAddin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 NetGridExample. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 PMLNetExample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:4 PMLGridExample. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:5 Reference Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:5 Compatibility with future versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:5How to Write an Addin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2:1 The IAddin Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:1 The WindowManager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:3 Window Creation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:3IWindow Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:4 Window Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:4WindowManager Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:5 The StatusBar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:5Addin Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:6 Writing a Command Class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:6 Command Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:9 Resource Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:9 Configuring a Module to Load an Addin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2:9 Menu and Command Bar Customization . . . . . . . . . . . . . . . . . . . . .3:1 Configuring a Module to Load a UIC File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:1 Editing the UIC File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:2 Selection of Active Customization File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:3 The Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:4Selecting a Node in the Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:5 Drag & Drop within the Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:5 Node Context Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:5 List of Command Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:6 Selecting a Node in the List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:6 Drag & Drop from the List to the Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:6 List Context Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:7 Tool Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:8 Sorting List via Heading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:10 Property Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:10 Action Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:12 Resource Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:13 Resource Editor Command Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:14 Using Resources for Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:16 Standalone Resource Editor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3:16Database Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4:1 Data Model Definition Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1 DbElementType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1 Constructors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1 Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:2 Related ENUMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:2 Related Pseudo Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:2 DbAttribute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 Constructors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 Related ENUMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:4 DbElementTypeInstance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:4 DbAttributeInstance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:4Element access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:5 DbElement Basics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:5 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:5 Constructors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:5 Identity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:5 Element Validity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:6 Error Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:6 Basic Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:6 Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:7 Basic Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:7 Pseudo Attributes Relating to Element Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:8 Secondary Hierarchies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:8 Getting Attribute Values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:9 Basic Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:9 List of Valid Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:10 Qualifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:11 Getting an Attribute as a Formatted String . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:11 Database Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:11 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:11 The Modification Pipeline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:12 Claiming Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:13 Pseudo Attributes Relating to Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:13 Set Attribute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:14 Creating Element. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:14 Moving Element. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:15 Changing Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:15 Pseudo Attributes Relating to Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:15 Storage of Rules and Expressions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:16 Database Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:16 Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:17 Pseudo Attributes Relating to Rules and Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:17 Comparison of Data with Earlier Sessions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:17Filters/Iterators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:19 Iterators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:19 Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:19Dabacon Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:19 Overview of Dabacon Tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:19 Table Classes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:20 DBs, MDBs and Projects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:21 MDB Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:21 DB Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:22 Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:23 Overview of Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:23 Overview of C# Mechanism. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:23 General Capture of DB Changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:24Adding Pseudo Attribute Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:24 DB/MDB Related Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:26PMLNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5:1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:1 Design Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:1 Using PMLNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:1Limitations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:2 Object Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:3 Query Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:3 Global Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:4 Method Arguments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:4 Method Overloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:5 Custom Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:5 Private Data and Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:6 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:6 Instantiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:7 ToString() Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:7 Method Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:7 Double Precision. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:7 Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:7 Error Handling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:8 Rules for Calling .NET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:8 Tracing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:9 .NET Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:9 Creating a Container. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:9 Hosting .NET Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:10 Events. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:10 Examples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:10 PMLGridExample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:10 PMLNetExample. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:10The AVEVA C# Grid Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6:1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:1 Creating a C# Addin which Contains an AVEVA Grid Control. . . . . . . . . . . . . . 6:1 Providing Access to the Addin in PDMS Design or Outfitting Design . . . . . . . 6:3 Using the AVEVA Grid Control with Different Data Sources: . . . . . . . . . . . . . . 6:4 Adding an XML Menu to the Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:5 Adding an Event to the Addin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:6 Other Functionality Available within the PDMS Environment. . . . . . . . . . . . . . 6:7 Use of the C# Grid Control with PML. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:7 AVEVA Grid Control API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:7 Input Mask Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6:121Introduction1.1About this GuideThis manual is designed to give a software engineer with experience of softwaredevelopment in C# using Visual Studio guidance on the development of .NET customizationfor the AVEVA PDMS and AVEVA Marine products. Customization ArchitectureThe introduction of a customization capability using Microsoft .NET technology has openedup a whole new world of customization and is particularly relevant for the integration ofAVEVA products with other customer systems. .NET API's provided access to variousaspects of the product including Graphical User Interface, Database and Geometry.As part of AVEVA's strategy of 'continual progression' the .NET customization capability hasbeen introduced in such a way that it can be used alongside the existing PML basedcustomization. Through the use of , an enhancement to PML which allows thePML programmer to call .NET code, customization which utilizes the strengths of .NETcompiled code and PML can be achieved.Figure 1: customization ArchitectureThe above diagram illustrates the two new methods of customization using .NETtechnology. The first is via the concept of a .NET Addin and the second using .Both methods provide a mechanism whereby a .NET assembly (dll) can be dynamicallyloaded into a module at runtime.1.2.1Common Application Framework InterfacesThe Common Application Framework (CAF) is an extensible framework which provides the.NET programmer with access to various services which support both applicationdevelopment and customization. The foundations of the CAF are provided by the twointerface assemblies:•Aveva.ApplicationFramework.dll•Aveva.ApplicationFramework.Presentation.dllThese interfaces provide the following major services:Namespace: Aveva.ApplicationFramework•AddinManager: This class provides properties and methods for the management of ApplicationFramework Addins.•ServiceManager: This class defines an interface which provides a means by which the various components of the ApplicationFramework can publish their services. TheServiceManager also acts as a service provider responding to requests for services. Itcan also be used by applications and application addins to publish additional services.•SettingsManager: This class provides properties and methods for the management of application settings which are stored in settings groups which are persisted betweensessions.Namespace: Aveva.ApplicationFramework.Presentation•CommandBarManager: This provides access to the menus and commandbars of a CAF based application. It also has methods to load the definition of menus andcommandbars from User Interface customization (UIC) files.•CommandManager: This class defines an interface to provide the presentation framework client with a mechanism for the management of command objects whichcan be associated with Tools or other User interface objects. The action of invoking atool (e.g clicking a ButtonTool) will cause the execution of the associated commandobject. It is possible to associated the same command object with a number of differentuser interface objects (e.g. ButtonTool on a Menu and a LinkLabel) thereby allowing forthe centralisation of these user interface objects action within a command. Variousstate-like properties of a command (e.g. enabled/checked) would also be reflected in alluser interface objects associated with a command. For example, disabling a commandwould cause all associated user interface objects to be disabled. User interface objectsare associated with a command via a CommandExecutor derived class.•ResourceManager: This class defines an interface to provide Addins with a simplified mechanism to access localizable resources.The ResourceManager provides a numberof methods which allows an addin to then access the various types of resources (string,image, cursor, icon etc.) which resource files may contain.•WindowManager: This provides access to the main application window, the StatusBar and a collection of MDI and docked windows. It also provides the addin writer withmethods to create MDI and docked windows to host user controls.1.2.2Database InterfacesThe database related interfaces are provided by the interface assemblies:•Aveva.Pdms.Database.dll & PDMSFilters.dllThis interface has the following main classes:Namespace: Aveva.Pdms.Database•DatabaseService: The sole purpose of this class is to open a project.。
DP83848C中文资料
The DP83848C easily interfaces to twisted pair media via an external transformer. Both MII and RMII are supported ensuring ease and flexibility of design.
The DP83848C includes a 25MHz clock out. This means that the application can be designed with a
• Energy Detection Mode • 25 MHz clock out • SNI Interface (configurable) • RMII Rev. 1.2 Interface (configurable)
2.0 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.1 Auto-Negotiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 2.1.1 Auto-Negotiation Pin Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.1.2 Auto-Negotiation Register Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2.1.3 Auto-Negotiation Parallel Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.1.4 Auto-Negotiation Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.1.5 Enabling Auto-Negotiation via Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.1.6 Auto-Negotiation Complete Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
系统集成项目管理工程师真题集锦英语题及答案
●Which of the following statement related to PMO is not correct? (71)(71) A. The specific form, function, and structure of a PMO is dependent upon the needs of the organization that it supports.B. One of the key features of a PMO is managing shared resources across all projects administered by the PMO.C. The PMO focuses on the specified project objectives.D. The PMO optimizes the use of shared organizational resources across all projects.［答案C］●The inputs of developing project management plan do not include (72).(72) A. project charter B. stakeholder management strategyC. project scope statementD. outputs from planning processes［答案B］● A project life cycle is a collection of generally sequential project （73）whose name and number are determined by the control needs of the organization or organizations involved in the project. The life cycle provides the basic （74）for managing the project, regardless of the specific work involved.（73）A. phases B. processes C. segments D. pieces（74）A. plan B. fraction C. main D. framework［答案A、D］●（75）is one of the quality planning outputs.(75) A. Scope base lineB. Cost of qualityC. Product specificationD. Quality checklist［答案D］69. 71．Ris kmanagement allows the project menaget and the project team not to(71) 。
阶段性生产件批准程序(PPAP)常见问题中英文对照
Phased PPAP Frequently Asked Questions (FAQ)阶段性生产件批准程序（PPAP）常见问题Q: How can I obtain copies of the Phased PPAP manual and Capacity Verification documentation?A: Information is available at: FSP:https:///servlet/PostBulletin?action=viewBulletin&bulletinID =1964 and FSN: https://.问: 我怎样才能得到阶段性生产件批准程序（PPAP）手册和生产能力验证文件副本?答: 通过以下网站可获取相关信息：FSP：https:///servlet/PostBulletin?action=viewBulletin&bulletinID =1964和FSN：https://。
Q: Are suppliers still required to update the EASI system or will tracking take place in CMMS3?A: The EASI system will be phased out over the two years, and replaced by a modified version of CMMS3 that will include dates, etc., for PSW. PSW and parts progress tracking will take place in CMMS3 going forward. Once an EASI user is transitioned to CMMS3, they should continue all parts progress in CMMS3. There will also be on-line training for these changes.问：供应商是否还需要对EASI系统进行更新？在CMMS3中是否将进行跟踪？答： EASI系统将在两年内逐步废除，代之以改良后的CMMS3系统。
专有名词介绍2
1. PMP ( Process Management Plan ) 製程管理計劃 2. FPF ( Frist Pass Fullout ) 不良直通率 3. CTO ( Configuration To Order ) 依客戶之要求所生產 4. BTO ( Build To Order ) 自訂規格與配備讓客戶選擇 5. DTS ( Deliver To Stock ) 免驗或僅需核對部份項目 6. JIT ( Just In Time ) 入料後直接上線不經IQC檢驗 入料後直接上線不經 檢驗 7. DMR ( Defect Material Review ) 不良材料重新確認 8. MRB ( Material Review Board ) 材料複審會 9. CR( Critical) 影響使用者生命或財產安全之問題. 嚴重缺點 :影響使用者生命或財產安全之問題 影響使用者生命或財產安全之問題 10.MA ( Major ) 主要缺點: 影響產品之功能運作,無法達到預期之效果 但不影響生命安全) 主要缺點 影響產品之功能運作 無法達到預期之效果.(但不影響生命安全 無法達到預期之效果 但不影響生命安全 11 MI ( Minor) 不影響產品之功能運作,但仍有暇疵存在 但仍有暇疵存在. 次要缺點 : 不影響產品之功能運作 但仍有暇疵存在 11.IQC: Incoming Quality Control: 進料檢驗品質管制 進料檢驗品質管制. 12. IPQC In Process Quality Control : 製程品質管制 製程品質管制. 13. OQC Outgoing Quality Control : 成品出貨品質管制 14. TQC(M) Total Quality Control(Manggement ) :全面品質管制 理). 全面品質管制(理 全面品質管制 15. AQL Acceptable Quality Level : 可允收之品質水準 16.ASN Average Sample Number : 平均樣品數 平均樣品數. 17.LTPD Lot Tolerance Percent Defective:拒收品質水準 拒收品質水準. 拒收品質水準 18.ECR ( Engineering Change Request ) 工程變更需求. 工程變更需求 19. ECO( Engineering Change Order ) R/D 改變通知書 改變通知書. 20. ECN( Engineering Change Notice ) 工程變更通知書. 工程變更通知書 20. FN ( Factory Notice ) 製程及臨時代用料變更部份, 製程及臨時代用料變更部份 或材料報廢 . 21. SCAR ( Supplier Corrective Active Request ) 供應商不良材料對策回饋單
QE试题
最新资料，word文档，可以自由编辑！！精品文档下载【本页是封面，下载后可以删除!】1.解说下列名词意义(18分), q+ j( g! s: e. p: Q# S) j(1)SPC____Statistical process control 统计制程控制(2)PPM____ Parts Pre million 百万分之一(3)PPK_____________________________(4)X-R chart____中心值全距控制图9 b! \3 \- E! F9 m% o(5)P chart______不良率控制图.西格玛品质论坛4 n% l/ u {5 C1 Y* a质(6)PN chart____不良数控制图.(7)σ_________制程标准差.(8)Ca______________________________ S' R c; z7 C" R' v o(9)Cp______工序潜能指数(CP=USL-LSL)/6{.σ.b3 @3 Y9 x CPK=Capability index of process(10)CPK____制程能力指数(CPK=(CPU,CPL)/最小值1.CPU=(USL-平均值)9 //3/c* N\σ 2.CPL=(X-LSL) /3/c* N\σ.(11)AQL___ Accepteable Quality Level% f9 X& B/允收品质水准(12)GR &R__________________________(13)MSA----( measurement system analysis 测量系列分析)(14)IS0------ ( International Organization for standardization 国际标准化组织)(15)APQA---(Advanced Product Quality Planning 高级产品质量策划)(16)PPAP-----( Production Parts Approvel Process 生产件批准程序)(17)M3X0.5,牙孔擠牙底孔需要( 2.73MM ),M3代表(普通螺丝大径为3MM),0.5代表(螺距)(18)質量成本包括( 人工成本,质量成本, 材料成本, 税收成本)四種成本.2.漢譯英/英譯英:burr( 毛刺/披锋) 變形( deform ) 攻牙( Tap ) 熱處理: (Heat treament ) 硬度:( Hardness ) 氧化( anodize )表面處理:( surface processing tolerances(公差) customer(客户)material (材料)2.品管七大手法是哪几种?哪种手法是用来找寻问题的主要矛盾?哪种手法用于制程过程控制?(5分)" Q# x: d7F( n5 P, M) O5 I1 ~# l1。
PRISMA-P中英文版
PRISMA-P中英文版nThe PRISMA-P 2015 ___.___The title of the protocol should clearly identify it as a protocol for a systematic review。
If the protocol is an update of a us systematic review。
this should be stated。
If the protocol has been ___。
the name of the registry ___ should be provided.___The names。
nal ns。
and email addresses of all protocol authors should be provided。
The physical mailing address of the corresponding author should also be included。
The ns of each protocol author should be described。
and the guarantor of the review should be identified。
If the protocol ___ or published protocol。
this should be ___。
a plan for documenting important protocol amendments should be provided.Support___ may include funding agencies。
ns。
or individuals who have provided support for the review。
If there are no sources of support。
英文版计算机试题及答案
英文版计算机试题及答案一、选择题（每题2分，共20分）1. Which of the following is not a function of an operating system?A. Process managementB. Memory managementC. Data storageD. File management2. In a computer network, what does the term "bandwidth" refer to?A. The width of the network cableB. The maximum rate of data transferC. The number of users connectedD. The speed of the network processor3. What is the primary purpose of a firewall?A. To prevent unauthorized access to a networkB. To encrypt dataC. To manage network trafficD. To store user passwords4. Which of the following is a type of software used for creating and editing documents?A. Spreadsheet softwareB. Database softwareC. Word processing softwareD. Graphics software5. What is the term used to describe the process of converting data from one format to another?A. Data migrationB. Data transformationC. Data conversionD. Data translation6. What does the acronym "CPU" stand for in computing?A. Central Processing UnitB. Central Processing UnitC. Computer Processing UnitD. Computing Processing Unit7. What is the function of a router in a network?A. To connect multiple networksB. To store dataC. To provide power to devicesD. To print documents8. What is the process of finding and fixing errors in software called?A. DebuggingB. PatchingC. UpdatingD. Patching9. Which of the following is a type of computer virus that replicates itself by attaching to other programs?A. TrojanB. WormC. RansomwareD. Spyware10. What is the term for the graphical representation of data on a computer screen?A. Data visualizationB. Data representationC. Data graphingD. Data mapping二、填空题（每题2分，共20分）1. The _________ is the primary memory used by a computer to store data and instructions that are currently being processed.2. A _________ is a type of software that allows users to create and edit images.3. The process of converting analog signals to digital signals is known as _________.4. A _________ is a collection of data stored in a structured format.5. The _________ is a hardware component that connects a computer to a network.6. In computer programming, a _________ is a sequence of statements that perform a specific task.7. The _________ is a type of malware that hides its presence and waits for a trigger to activate.8. A _________ is a type of software that is designed to protect a computer from unauthorized access.9. The _________ is the process of organizing and managing data in a database.10. A _________ is a type of software that allows users tocreate and edit spreadsheets.三、简答题（每题10分，共30分）1. Describe the role of a server in a computer network.2. Explain the difference between a compiler and an interpreter in programming.3. Discuss the importance of data backup and recovery in a computing environment.四、编程题（每题15分，共30分）1. Write a simple program in Python that calculates the factorial of a given number.2. Create a function in Java that takes an array of integers and returns the largest number in the array.答案：一、选择题1. C2. B3. A4. C5. C6. A7. A8. A9. B10. A二、填空题1. RAM (Random Access Memory)2. Graphics software3. Analog-to-digital conversion4. Database5. Network interface card (NIC)6. Function or procedure7. Trojan8. Antivirus software9. Database management10. Spreadsheet software三、简答题1. A server in a computer network is a powerful computer or system that manages network resources, including hardware and software, and provides services to other computers on the network, such as file storage, web hosting, and print services.2. A compiler is a program that translates source codewritten in a programming language into machine code that a computer can execute. An interpreter, on the other hand, reads and executes the source code line by line without the need for a separate compilation step.3. Data backup and recovery are crucial in a computing environment to prevent data loss due to hardware failure, software bugs, or malicious attacks. Regular backups ensure that data can be restored to a previous state in case of corruption or deletion.四、编程题1. Python Program for Factorial Calculation:```pythondef factorial(n):if n == 0:return 1 else:。
PM项目管理师英文简历
PM项目管理师英文简历2022-09 ～2022-07 Xian Peihua University English Junior CollegeTarget Jobs: Project Management、 Sales CS、 SQATraining2022-03 ～2022-05 China Wisdom PMP PMP training certification2022-11 ～ 2022-12 Walton printing co., LTD., Training internal auditors---Training courses2022-08 ～2022-09 xian foreign affairs college strengthening human resources management ---training courses 2022-06 ～ 2022-07 Xian finance and economics institute marking promotion training---training courseSelf Assessment:First, work carefully, positively and earnestly, have strong responsibility for work and can complete the task on time; Second, have strong learning capability, can unceasingly study the new electron technology and have creativity ;Third, am self-confident, have the ideal, can perseverein work and don’t pursue an impractical goal ;Forth, can endure hardship, unite the colleague, obey the leadership request and have the good team cooperation spirit.Project Experience一、Bluetooth mono headset series:Nokia：scallop,squid,chabao;HTC：bliss (2022-01 ～ 2022-07)Job Title: PMProject Description: Responsible for the follow up Nokia and HTC two big customers new module development ,From RFQ to final production until after-sales service .Mainly responsible for project bluetooth headset, project name (Nokia: scallop, squid, chabao, HTC: bliss) all above projects after the project team and customer good coordinated and right now they all in normal production and market sales better than expected effect.Responsibility: 1. Responsible for the customer file material preparation and submission of quotation integrated research personnel all information for open case offer to do the most adequate preparation2. Offer trial and to improve the success rate for quotation and prepare backup plan and TL summarize each research and development group of the main problems and provide feasible solutions3. According to customer needs make elaborate research and development and the production schedule and productionschedule for internal discussion to the efficiency of the development process4. Research and development stage of the preparation and the follow-up work is finished product development stage all the necessary report data preparation and later submit (EV - DV - PV - LV - MP)5. Responsible for the overall development project each research personnel team resource integration and gather the whole work report6. Production after complete the project development in the process of trial-produce experience lessons learned7. To the quality problem of the after-sales service and follow upSpecial SkillsProfessional Title: Computer skillsComputer Level: national computer exam. grade 4Computer Skills: Computer basic WORD, EXCEL, POWERPOINT office of software, especially in skilled practitioners to manage the production of courseware during the co-ordination have some experience, and skilled use of the companys ORECL, PLM, SAP, MS OUTLOOK, LUTE NOTES and other commonly used systems. Strengths: 1. For the electronic OEM OEM, ODM industry,project management, especially with the RD NPI projects and other work processes to develop into a very skilled and has a long experience, and can be adjusted according to actual work for the degree of difficulty of the project reasonable working arrangements.2. In human resources with training experience, especially for corporate candidates, keep people, educating p eople, a profound understanding of the deployment of employees, which will soon make their own team to work with core strength while for the smooth conduct of the human enterprise Cost is also a very effective use.3. In marketing has also had professional training experience and insight to the strong market conditions, based on time in the company or other specific issues the project implementation will have sufficient resources in favor of reference to make the right judgments to ensure that focus does not will be deviated from.4. Engaged in a customer service has accumulated a wealth of experience to understand customer needs, with the most cost-effective way to make customers satisfied at the same time allows the company to pay a minimum investment. Customers benefit first, but the company is maintaining the integrity andeffectiveness of top priority, and in the office served as the printing industry, while responsible for the QE handling customer complaints and 35 cases of customer complaints well done well done at the same time has also been praise for the guests.5. I was working as a quality of the quality of the company documents such as quality management system, management system, environmental management system are all very familiar.6. And the skilled use of the companys ORACLE, PLM, SAP MS OUTLOOK, LUTE NOTES and other commonly used systems.Language SkillsChinese: Good Cantonese: GeneralEnglish Level: Majored in English CET-4 CET-6 PETS-3 Spoken GoodJapanese: GeneralCareer Direction: Proficient in the electronic telecommunication product development entire process, I am Quite familiar electronic products from project kick off to mass production the whole process, responsible for product project management, follow up trial-produce; Lead project team according to customer or their own product positioning and development requirements and regulations and given theschedule of new product development running smoothly to mass production; According to project plan tracking and report project progress and problems;Prepare and control project budget; Prediction and control project risk; Research and development team internal communication, and customer, market, procurement, communication, Quantity postpartum production abnormal assist maintenance etc.1.About EMS especially for OEM, ODM industry project management especially NPI project fit RD development such as import working process very skilled and have a long work experience.Requirements: 2. Engaged in is customer service has accumulated rich experience to understand customer needs, with the most economic and effective way to make the guest satisfaction, at the same time and allow companies pay a minimum of the devotion. Guest benefit first but the company integrity and efficiency maintenance is top priority.3. And skillfully use company ORACLE, PLM, SAP MS OUTLOOK, LUTE NOTES OA system.Self Assessment: Has a strong sense of responsibility and optimism, I enjoy reading, making friends, and outings. Hope you wise for my vision to provide a platform to showcasethemselves to fully realize my potential to create wealth for your company, and continuously improve the self- . honest, reliable, quick thinking, good group spirit of cooperation and communication; a positive, optimistic and bold pioneering spirit. Good telephone communication skills, proactive and has a good sense of service, with good English listening, speaking, reading and writing ability, office software. able to familiarize themselves with the operation of the process product quickly established good relationships inside and outside the company, determined the long-term, challenge themselves, and I firmly believe that my super power and executive power is subject to you and your The company chose my key. also very grateful for your appreciation!RewardsOutstanding research and development team model 2022-06-08yearly outstanding representatives 2022-12-17CertificationsGraduate certificate 2022-07-05PMP Training Certificate 2022-04-21PETS - 3 2022-09-17CET-4 2022-06-17CET-6 2022-12-17computer grade certificate 2022-09-17。
Oracle ESB与BPEL PM的使用指南说明书
- JDeveloper ESB Diagrammer - BPEL JDev service browser - File Adapter - Transformation - Routing Service Routing Rules
Steps
- Start ESB and BPEL PM - Open ESB LoanRouter Project - Register LoanRouter Project - Open BPEL LoanFlow Project - Modify and Deploy LoanFlow Project - Test and View Results
ESB Lesson08
Page 13
BPEL Console: Initiate process
- Select “LoanFlow” on Dashboard - Enter HTML or XML data on form - Select “Post XML Message”
to initiate BPEL process
Wait for the pop-up window to indicate the SOA Suite startup has completed
ESB Lesson08
Page 5
JDeveloper: Deploy Dependant Processes
- Start BPEL Developer Prompt
- Create ESBSamples folder from zip file(s)
- unzip ESBSamples.zip to C:\ESBSamples or any other location - ESBSamples.zip is in the “SampleData” folder
Travel Post Ticket Change Amadeus Ticket Change
Post Ticket Change / Amadeus Ticket Changer (ATC)
Section 1: IMPORTANT – About this Guide
Be aware of the following: • Infinite variables: Certain scenarios have an infinite number of variables or extremely unusual circumstances, like rare cancellation or refund situations. So, not all scenarios can be presented in this guide. Also, certain processes may be influenced by third- or fourth-party providers. In some cases, you must contact the provider directly. • User interface, fees, rates, schedules: When other providers change their user interface (for example, web site) or their fees/rates/schedules, they are under no obligation to make SAP Concur aware of those changes. If a screen sample in this guide is outdated because of a change made by a provider, we will update that screen sample when we become aware of the change and at our earliest convenience. • Permissions: A company's admin may or may not have the correct permissions to manage the feature described in this guide. If an admin needs to manage this feature and does not have the proper permissions, they should contact the company's SAP Concur administrator.
Fujitsu PrimeQuest企业服务器商品说明书
Global Support Center Availability 24 x 7 x 365 Your choice of service levelsTo succeed in today’s highly demanding business environments, you depend upon your IT resources as never before. At Fujitsu, we understand the technological challenges you face everyday, after all, we’ve been providing enterprise solutions for over thirty-five years.excellent service and support for priMeQuest enterprise serversAs the world’s fourth largest IT services provider, Fujitsu focuses on keeping IT and business objectives aligned through close collaboration with our customers. For over 35 years Fujitsu has provided IT infrastructure services and support to some of the world’s largest, most successful corporations. The Fujitsu core competencies in world class data service and support have evolved from mission-critical data center business systems to encompassing the entire enterprise world, including distributed computing environments.Global support center availability 24 x 7 x 365The cornerstone of our business is Mission Critical Support delivered by experienced engineers and backed by an ISO 9001 certified Global Support Center that operates 24 hours a day, 7 days a week, 365 days a year.service coMMitMentThe Fujitsu support structure allows you to select the support type that best fits your day to day needs. Customers can select Premium, Enhanced Plus, Enhanced or Basic support options. All support options include live telephone support, replacement parts, and onsite support within defined coverage hours. In addition to warranty service, support options are offered as uplifts and as post-warranty support service.preMiuM and enhanced plus servicesPremium or Enhanced Plus Service supports operational objectives of the most demanding mission-critical customer environments.fact sheetsupport and services offerinGs for fujitsu priMeQuest enterprise serverspreMiuM service and support for your enterpriseReady 24 hours a day, 7 days a week, 365 days a year, we respond with reliable parts and live telephone expertise to quickly restore your environment. Our onsite response time goal of 2 or 4 hours (Premium and Enhanced Plus respectively), is available in defined service areas encompassing major metropolitan areas.enhanced serviceThe Enhanced Service level is for customers who require an expanded window of onsite support coverage during the normal Monday—Friday business week, 8AM to 8PM local time (except Holidays), with parts and an onsite response time goal of 4 business hours. Enhanced Service includes live telephone support 24 hours a day, 7 days a week, 365 days a year.basic serviceThe Basic Service level is for customers with less stringent support needs, requiring both telephone and onsite coverage during a normal workday, Monday – Friday, 8AM to 8PM local time (except Holidays). Basic Service provides live telephone support, with parts and an onsite response time goal of 4 business hours between 8AM and 5PM, Monday - Friday.reMote support toolFujitsu offers a Remote Support Tool to capture machine status and error information. This data is securely transmitted via the Internet to a central location and made immediately available to support engineers to take action. The basic Remote Support Tool is bundled with the product and included at no additional cost.Warranty offerinG— north aMericaThe warranty period, hardware and software telephone assistance/ response times, onsite coverage hours/response times and additional program features are described in the Service Program Offerings matrix. Warranty offerings vary by country—check with your country Fujitsu Business Manager, as well as your agreement to purchase the hardware and license the software.custoMized consultinG/professional servicesFujitsu can assist customers in optimizing your investment in technology by offering a full range of additional services. Whether you require advice on server consolidation, helpwith deployment, additional support levels, or education, Fujitsu can deliver the services you need.PRIMEQUEST Enterprise QuickStart ServiceVirtualization Assessments and ImplementationFlexFrame™ for SAP®BW-Accelerator Solution for SAPSAP Discovery System ConfigurationLinux Cluster Implementation Services (PRIMECLUSTER®)Microsoft® SolutionsRed Hat Linux Fundamentals TrainingNovell SUSE Linux Fundamentals Trainingabout fujitsu aMericaFujitsu America, Inc. provides a complete portfolio of business technology services, computing platforms, and industry solutions. Fujitsu platform products are based on scalable, reliable and high-performance server, storage, software, point-of-sale, and mobile technologies. Fujitsu combines its renowned platform offerings with a full suite of onshore, near shore and offshore system integration, outsourcing, and datacenter services covering applications, operations, infrastructure, customer service, and multi-vendor lifecycle services. Fujitsu provides industry-specific solutions for retail, manufacturing, healthcare, government, education, financial services, and telecommunications sectors. For more information on Fujitsu America’s business scope, visit .Service Program Service Level offeringS Warranty, uplift and Post Warranty SupportProduct (1)Hardware WarrantyBasic enhancedenhanced Period (1) Plus Premium (5)Pq1800e3-Year Basic WarrantyWarranty Warranty WarrantyService Leveluplift uplift uplift Post Post Post Post Warranty Warranty Warranty WarrantyPq540a/ Pq580a1-Year enhanced Plus n/a n/a WarrantyWarrantyService Leveluplift Post Post Post Post Warranty Warranty Warranty WarrantyPq520a1-Year Basic WarrantyWarranty Warranty WarrantyService Leveluplift uplift uplift Post Post Post Post Warranty Warranty Warranty WarrantySoftware Warranty Period 90-day media replacementinstallation fee-BasedSupport features (1)telephone assistance Hours24 x 7 x 365 (3) 3338am – 8Pm Site Local timemon – fri, except Holidays8am – 5Pm Site Local timemon – fri, except Holidays 3telephone response time target (3)Severity 1 – Live transfer 3333 Severity 2 2 Hours 2 Hours 2 Hours 2 Hours Severity 3 4 Hours 4 Hours 4 Hours 4 Hours onsite coverage Hours24 x 7 x 365 (3) 338am – 8Pm Site Local timemon – fri, except Holidays 38am – 5Pm Site Local timemon – fri, except Holidays 3onsite response target time (4)(5)Severity 1 next Business day 4 Business Hours 4 Hours 2 Hours Severity 2 next Business day next Business day next Business day 4 Hours Severity 3 next Business day next Business day next Business day next Business day Spare Parts (5)response time (Severity 1) next Business day 4 Business Hours 4 Hours 2 Hours Parts replacement By fujitsu By fujitsu By fujitsu By fujitsu account Support featuresSingle Point of contact for HW & SW problems 3333time-Based alert and escalation Process 3333 Service account management n/a n/a 33 account Support Plan (6) n/a n/a 33 account Support review (7) n/a Semi-annual Semi-annual quarterly firmware update Service 3333field change order (fco) management assistance 3333 mission-critical Support Process n/a Severity 1 only Severity 1 only 3 designated contacts Per Site authorizedto call global Support center 3333 additional contacts Per Site fee-Based fee-Based fee-Based fee-Based remote maintenance (8) 3333 driver updates (9) 3333fee-Based Support featuresSoftware maintenance (10) fee-Based fee-Based fee-Based fee-Based Software version upgrades (11) fee-Based fee-Based fee-Based fee-Based onsite Parts n/a n/a n/a fee-Based Professional ServicesSoftware installation fee-Based fee-Based fee-Based fee-Basedfujitsu aMerica, inc.1250 east arques avenueSunnyvale, ca 94085-3470, u.S.a. telephone: 800 831 3183 or 408 746 6000 fax: 408 764 5060Web: email:********************.comfujitsu and the fujitsu logo are registered trademarks and PrimequeSt is a trademark of fujitsu Limited in the united States and other countries. all other trademarks referenced herein are the property of their respective owners.Product description data represents fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. Specifications are subject to change without notice.copyright ©2010 fujitsu america, inc. all rights reserved. fPc58-0480-06 07/10 10.0720NOTES:(1) P roducts and/or specific Support Features are subject to local geographic availability.(2) Th is 24 x 7 x 365 coverage period is the only coverage period that includes local Holidays.(3) Th e following definitions apply for problem severity: Severity 1: Server down, business outage. Severity 2: A serious problem, but impaired production is proceeding. Severity 3: An important problem that does not affect production.(4) O nsite Response Target by a Service Engineer is within the contracted Onsite Coverage Hours. Two-hour Onsite Response Target for Severity 1 priorities is offered for sites within a fifty (“50”) mile radius of a Fujitsu authorized service operation. Onsite Coverage applies to hardware support. Software is supported remotely by the Fujitsu Global Support Center.(5) O nce a failed component is identified, the Spare Parts Response Time is measured from the time a replacement part is ordered to the time the part arrives at the site where the system is located, and may be impacted by import/export limitations. The time used is local site time where the system is located.(6) L ocal customer support management will provide the process for the design of an Account Support Plan for the customer.(7) Q uarterly or semi-annual onsite Technical Account Support Reviews include discussion of product support and service issues during the previous period as well as problem resolution and/or action plans.(8) Th e Fujitsu Remote Support Tool monitors machine status continuously. Machine status and failure data is securely sent to Fujitsu America support personnel for analysis and action. Should the customer decline setup of the Remote Support Tool, or it cannot be configured for other reasons, Fujitsu’s ability to meet certain response time targets may be impaired. Please contact your Fujitsu Business Manager for details.(9) D river updates are available from our secure download site: https:///,(10) S upport for certain software (e.g. Red Hat Linux, Novell SUSELinux, Microsoft Windows Server, etc.) may require an annual subscription fee and/or annual fee based service.(11) S oftware version upgrades (e.g. 1.x to 2.x, etc.) mayrequire additional license fee. Software installation is a fee-based service.。
powermill10.0安装说明
powermill10.0安装说明
1.安装powermill 10前先运⾏dotnetfx20.exe安装microsoft netframework
2.0（你的系统⾥⾯如果有这个组件或者是
3.0以后版本则可以不安装）
2.运⾏PM_10_Setup.exe安装powerimill 10，
⼀直点next到这⾥，如果要改变安装位置则不要含有中⽂名字
确保chinese被选择上，否则没有中⽂版的
然后再点⼀下next和install即可开始安装，安装完成后不要重启电脑
3.运⾏PM10006_SP5.exe升级为SP5版
4.运⾏DELCAM_DUCTPOST1516.exe及PostProcessor 4800.exe安装后处理程序，安装过程⽐较简单，⼀直点next即可，安装完成后不要重启电脑
5.运⾏Exchange612005_nsis_200912.exe安装⽂件格式转换器
6.上述程序都安装完成后双击运⾏crack.exe进⾏破解
切换到conifg services标签
点save service保存服务
保存后即可关闭这个程序
7.重启⼀下电脑（⼀定要重启！）
8.ok了。
半导体刻蚀设备LAMTCP9400PMSOP
半导体刻蚀设备LAMTCP9400PMSOPPM SOP - TCP 9400SE/PTX POLY ALLIANCEETCHER1.0 Safety HighlightsAll PM and corrective maintenance are only allowed to be perform by trained personnel or under strict guidance of the trained personnel for trainees.1.1Before start of PM, use SMS SMM06TJ1 or SMM17TJ1,put thecorrect chamber to PM state. Input the reason for wet clean.1.2Place a ‘Man at work –Plasma’ sign at working area throughoutthe whole PM.1.3Remember to purge the chm for 5-10 minutes with the in housevacuum immediately when the chamber is vented for wet clean orcorrective maintenance.1.4Remember to wear facemask with acid gas filter cartridgeduring dismantling and while cleaning the dirty chamber orparts.1.5Please remember to wear SK gloves/chemical goggles glove whileusing 100% IPA.1.6Remember to use AK gloves/chemical goggles while using HF acid,nitric acid and H2O2.1.7Remember to use SK gloves/chemical goggles while usingethylene glycol/galden or brine.1.8Use SK gloves and handle sharp edges with care & cautious.1.0a Lock Out Tag Out (LOTO) procedures1.0a Turn off RF power supply and high voltage power supply.1.0b Lock out and tag out circuit breaker to RF power supply andhigh voltage power supply.2.0Pre-PM ProcedureWaiverOnly the manufacturing module manager, fab manager or fab engineering manager has the authority to give PM waiver. The equipment will be moved to PMw state if a PM waiver is given.Write down the reason for the wet clean. Eg. RF due, high B/E or etc.2.1Records down the wafer count, RF time for the chamber.RF on time = _____________ hours/minTotal wafer count = _____________ wafersTop qtz lifetime = _____________ hours2.2Perform a chamber leakrate with the TM at vacuum.Chamber leak rate = _____________ mt/min2.3Record down all the MFC configuration in PM checksheet.2.4Record down the top/bottom RF configuration value in PMchecksheet.2.5Perform pre wetclean gas calibration and partial pressurecheck as per setpoint in PM checksheet. Record down all gas cal and partial pressure (gas balance) data in checklist. Note: Chamber volume setpoint at 32000.Chamber temperature at 60c.ESC temperature at 70c.2.6Prepare and get ready 1 bottle of 100% IPA and DIW.2.7Prepare the PM parts, o-rings, swap kit, cleanroom wipes andscotch brite.2.8Check & verify to ensure correct PM kits and parts. Inform EEif any wrong parts or missing parts.2.9Run 2 times WAC900 recipe.2.10Pump/purge chamber for 40 cycles.2.11Perform a leak check up to ISO valve after turbo pump winddown.2.12Goto diagnose page, 'Temp Macro' and lower the followingtemperature to avoid heat hazards.Using Diagnose/IO-PM_/Temperature Macro page set the following temperature.Chamber vent procedure:2.12Turn off the PRK and change the chmb from auto to manual mode.Put turbo pump to local, and off turbo pump.2.13Chamber vent procedure:Manually open the VAT gate in local mode.Disconnect the pneumatic line from turbo iso & rough valve.Manually vent the chamber via manual vent valve V09.Close back the VAT valve after chmb vented to ATM to cover& protect the turbo pump.3.0Parts removal3.1Remove the chamber top quartz and o-ring.3.2Remove the quartz focus ring.3.3Remove the 2 vespel covers for ET491 & ET514, nuts and washersthat fasten the lower gas ring.For ET451, removed 4 vespel plugs bsr & 3 screws that fastenthe BSR gas ring to the chamber bottom.3.4Lift the lower gas ring out of the chamber. Use thelower chamber ring puller to remove this part.3.5Remove the two o-ring from the grooves on the undersideof the gas ring that seals against the chamber bottom.3.6Remove the two o-ring that seals the gas ring to gasinjection rod and alignment post.3.7Remove the ceramic insert ring from lower electrode.3.8Vacuum the chamber with vacuum hose.3.9Wash and flush the gas ring, top quartz disk and ceramicinsert ring with DIW and scotchbrite lightly to removeall polymers and stains on the process kits.3.10Remove the 100-militorr manometer’s assembly fromreactor endpoint plate. Clean the mounting flange withIPA and set aside in a safe place.Do not remove the manometer connector. Always ensure thatthe manometer is heated up.3.11Disassemble the chamber view and endpoint windowassembly.4.0 Chamber and Parts CleaningPrecautiousUse correct type of gloves when handling IPA.Protect the gas feed-thru; ESC chuck and turbopump from IPA. Cover with cleanroom wipes and ESC covers for ESC chuck protection.Do not wipe ESC with DIW, only ipa is allowed if ESC was not remove for cleaning.Use fluorescent light while doing wet clean to ensure all polymers are completely removed and cleanChamber Cleaning:4.1Use soft scrotch brite to scrub lightly the chmb wall with100% IPA until all stain is removed.4.2Thorough clean all exposed surfaces in main chamber. Wipe thechamber hardware until the wipes come out clean, showing no remaining etch residue. Scrub the wall lightly with scotch brite if required.Pay special attention to the window and gate valve port4.3Remove the eight screws that secure the middle chamber.4.4Remove the middle chamber o-ring and RF gasket.4.5Clean the transition manifold thoroughly. VAT valve must be inclose position while cleaning the manifold area to avoid contamination of the turbo pump.4.6Final wipe all surface with 100% IPA.Wipe down the ESC chuck and chamber wall with IPA until no discoloration on the wipes. Inspect the ESCchuck to check for any scratches and exposed aluminum.Protect the ESC chuck with ESC cover to prevent accidentally damage on the ESC chuck.4.7Flush the gas ring, ceramic insert ring, and chamber quartzdisk under flowing DI water then baked the parts in oven at 110c for 30 mins.TM Slot valve/Inner Door Cleaning4.8Vent the TM to ATM. Vacuum and clean the TM cover beforeopening the TM cover.4.9Clean the polymer and particles trapped at the edge of thechmb side with scrotch brite and IPA.4.10Scrotch brite and clean the inner door and install back.Inspect the chemraz door o-ring, replace if the chemraz o-ring is crack or worn out.4.11Exercise the door up/down few times to ensure that thealignment is correct and door is fully close properly.4.12Clean and vacuum the TM and robot assembly with DI water andfinal wipe with 100% IPA.4.13Pump down the TM and follow by pump purge with 3 cycles.VAT Valve Cleaning:4.14Remove the pendulum valve and locking ring to replace thelocking ring O-ring.4.15Scotch brite, clean the pendulum plate, locking ring andpendulum plate and bake the parts in oven at 110c for 30 mins.ESC cleaning procedure:Apply to when chmb down due to AL ball/ Type A defects/ lifterpin & lifter bellows replacement.Be careful of the ESC RF rod and protect the ESC surface formdamage at all time when cleaning!1.Remove the ESC chuck and clean and flush under running DIwater./doc/cadfddeef8c75fbfc77db2c1.html e N2 to blow-dry the ESC. Pay extra attentation to the groove of the ESC, He feed thru hole, lifter pinhole andcoolant inlet/outlet hole. Make sure no particles or watertrapped at the above areas.3.Cover the ESC surface with hard Teflon protective cover andbake in the oven at 110 deg for 1 hr. (Do not scratch the ESCsurface!)/doc/cadfddeef8c75fbfc77db2c1.html e N2 to clean and final wipe down the ESC with 100% IPA before install back to chmb.5.Proceed with normal ESC installation procedure and lifter pinchk.5.0 Chamber Process kit and parts/hardware Installation 5.2Clean the VAT valve and change out the o-ring.5.3Install back the pendulum plate & locking ring. Exercise thevate gate by opening & closing it, check for smooth operation.5.4Install the transition manifold service cover with new o-ring5.5Install endpoint plate assembly and replace with new o-ring.Install 4 strips of RF EMI type gasket.5.6Install the RF EMI type gasket and o-rings 2pcs on the 100MTmanometer and penning gauge ports.5.7Install back 100MT manometer weldment and penning gaugeassembly.5.8Install endpoint view port and o-ring. Change out the endpointview port at every 2 wetclean or the endpoint view port is badly etched/blurr.5.9Install the window screen and retainer.5.10Install all clean chamber parts baked from oven and inspectthem again5.11Clean the lifter pin and up/down the lifter pin few time toinspect for any rubbing & speed of lifter pin. Inform EE if suspect lifter rubbing or speed problem.Lifter pin rubbing and speed problem will cause AL ball defects and HE clamp flow problem5.12Did a final wipe down of the chamber with IPA before pump downthe chamber5.13Replace the top & mid chamber o-ring and final wipe down ontop window quartz disk. Clean and install the window clear lid to prepare for wfr handsoff chk.6.0 Post PM Procedure Chamber Pump Down Procedure:6.1Install back the pneumatics air tubing for rough ISO valve &manually pumpdown the chamber through rough ISO-valve using clear lid6.2Once the chamber pressure falls below 100mt, plug in thepneumatics air tubing for turbo ISO valve and wind up the turbo pump.6.3Put the VAT controller to remote mode when turbo pump fullywind up to full speed and put the chmb back to auto mode6.4Turn on the PRK.Wafer Handsoff & HE Clamp Flow Check6.3Verify the wafer handoff in chamber. Ensure wafer is notwobbling when it was resting on chamber 4 pins lifter.6.4Perform a HE clamp flow check by cycling with 5 dummy waferswith HE pressure set to 8 or 10 torr according to process recipe. Inspect and ensure that wafer is seated properly on ESC chuck and no wobbling.6.5Go to IO/diagnose sub page 'Temp Macro' ensure the followingsetpoint are correct:# Turbo temperature setpt 65 c# Gate valve temperature setpt 80 c# Chamber temperature setpt 60 c# Main temperature tols 10 c6.6Using the maintain/schedule-PM page, vent the chamber.6.7Remove the top clear lid and perform a final wipe down chamberwith IPA.6.8Clean and install back the top quartz disk.When installing the quartz disk, ensure that the same surface facing the chamber is facing down and correct orientation according to the top TCP coil. Changes the new quartz disk on every 2 wet clean or top qtz lifetime exceed 700 RF hr. 6.9Using the Maintain/Schedule-PM page, Inactive chamber vent -to pump down the chamber.6.10Perform a HE clamp flow check with a dummy wafer with b/s hepressure after pump down.8 torr for 52 poly etcher10 torr for 20 poly etcher6.11Wait for chamber leakrate.6.12Perform a chamber leakrate check at tm vacuum and tm atm.Chamber leakback must be <= 2.0 mtorr/min.6.13Perform chmb auto zero to zero the chmb base pressure.6.14Perform an MFC gas calibration and chamber partial pressure(gas balance) check once chamber leakrate come within specification according to respective prod recp setpt.Note: chamber volume setpoint at 32000.Chamber temperature at 60c.ESC temperature at 70c.All gas calibration error must be within SPC specification. If failed, please notify EE and change the MFC configuration with EE adviseAll chamber partial pressure must be within SPC specification.7.0PM RecoveryFor 100 Series 20 etch chamber:Run 2-5 dummy using recipe for qtz conditioning:Alliance Recipe: WAC_TOP_QTZ-X (x → chamber number) ?Season chmb with 1st lot of dummy wafers using:Alliance Recipe: PM-20-SEASON-X (x → chamber number) ?Season with 2nd lot of dummy wafers using:Alliance Recipe: T16-20season-X (x → chamber number)Use only 20 etch dummy wafers.7.1Change m/c state to pc qual state, run gas on pc withSequence ‘PC-Check-X’ (x- represent the chm. #).7.2Perform an etchrate qual. Refer to sms for qual procedureand specification.‘Reqe20qual’ -------- 20 etch qual procedures7.3 Rls to start t/w when all qual in spec and inform M.E.For 100 Series 52 etch chamber:Run 2-5 dummy using recipe for qtz conditioning:Alliance Recipe: WAC_TOP_QTZ-X (x → chamber number)TCP 9400 Recipe: 300Season with 1st lot of dummy wafers using:Alliance Recipe: 55-SEASON-X (x → chamber number)TCP 9400 Recipe: N.A.Season with 2nd lot of dummy wafers using:Alliance Recipe: T16-52season-X (x → chamber number)TCP 9400 Recipe: 2222Use only 52 etch dummy wafers.7.3Change m/c state to pc qual state, run gas on pc withSequence ‘PC-Check-X’ (x- represent the chm. #).7.4Perform an etchrate qual. Refer to sms for qual procedureAnd specification.‘Reqe52qual’ -------- 52 etch qual procedures8Key in all pre/post PM data into engineering template attached below when release the machine. The template ID:o‘ET49PM’ for 20 etch ET491o‘ET45PM’ for 52 etch ET451o‘2ET45PM’ for 2ET451(52 etch)/2ET452(20 etch)o‘ET51PM’ for 52 etch ET5149.0 Test Wafer RecoveryFor 100 Series 20 etch chamber:Rls to start 2 test wafers with 1 piece of 20 topo wafer after all machine qual in spec. Start the t/w and topo immediately after seasoning 6 dummy wafers without chamber idling.Expedite 1st T/w for CD/EB and 2nd T/w for RDA result & topo wafer x-section profile.Rls to season 2nd lot of dummy using T16-20season-X & start 3rd t/w as backup & push for RDA result.Release the m/c for production if all qual come in spec and inform the manufacturing engineer.For 100 Series 52 etch chamber:Rls to start 2 test wafers at 2 different step 5 timing after all machine qual in spec.1st t/w at –1.0 sec from current step 5 timing.2nd t/w at –1.5 sec from current step 5 timing.Spec for step 5 timing 15 +/- 5 sec.Consult EE/PEE if unsure about step 5 timing adjustment.Expedite both T/w for CD/EB and 1 T/w for RDA result.Release the m/c for production if all qual come in spec and inform the manufacturing engineer.End of Procedure。
福特FPDS milestone名词解释-Eng
4.5 4.5 4.5 4.5 3.5 3.5
3.25 3.25 3.25 3.25 … …
0 0 0 0 0 0
S5/P5 50.2 47/43 Scale S4/P4 43 S3/P3 38 S2/P2 28 S1/P1 21 40 33 … …
˙Program scaleability is based on degree of Vehicle & P/T changes. ˙The com bi scal assi ent det i m iest ned e gnm erm nes l one tm i i ng. Scale 6 5 4 3 2 1 Vehicle Change(s) All New Vehicle New Exterior, modified lower structure New Exterior, C/O lower structure Moderate Freshening Minor Freshening Trim
Notes
3
<KO>Kick-Off (The Beginning of Program Specific Work)
•Program “Black Book” that contains strategy/customer
information, business assumptions, technical requirements/targets, and implementation information compiled and signed-off
Develop Vehicle Package & 3D Designs AP0 &AP1 Prototype Phase
PF6 FlexSystem产品说明书
4
Easy system integration
A modular PF6 FlexSystem reduce your engineering e orts, making the integration with line equipments easier and e ective .
Improve your safety, while eliminate multiple cables and increase reliability and MTBF without worry about dirt or wet environments.
Result data collection
Operator guidance
PROFIsafe
IP 54
What customer are saying?
“I saved two whole installation days using the PF6 FlexSystem. The product is extremely fast and smooth. I also saved seven seconds in cycle times.
In conjunction with the most durable
Application Centers have the ability to combine standard Atlas Copco acessories to innovate a customized solution, such as a torque arm, wheel multiple, and more.
PF6 FlexSystem
The future of exible production
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
PowerMILL的后处理应用技巧1引言PowerMILL是一种专业的数控加工自动编程软件，由英国Delcam公司研制开发。
从PowerMILL的使用来看，PowerMILL可以说是世界上功能最强大、加工策略最丰富的数控加工编程软件系统之一，同时也是CAM软件技术最具代表性的、增长率最快的加工软件。
它实现了CAM系统与CAD系统的分离，可以更充分发挥CAM和CAD各系统的优势，可在网络下完成一体化集成，所以更能适应工程化的要求。
其广泛应用于航空航天、汽车、船舶、家电以及模具等行业，尤其对各种塑料模、压铸模、橡胶膜、锻模、冲压模等具有明显的优势.软件的数控自动编程主要是软件经过刀位等自动计算产生加工刀具路径文件，但刀路文件并不是数控程序。
需要从加工刀具路径文件中提取相关的加工信息，并根据指定数控机床的特点及要求进行分析、判断和处理，最终形成数控机床能直接识别的数控程序，这就是数控加工的后置处理。
本文针对PowerMILL自动编程软件后处理方面的技巧进行探讨。
2 PowerMILL后处理使用技巧在PowerMILL生成刀具路径后，提供了两种后处理方法:NC程序和PM-Post后处理.2.1 NC程序NC程序模块存在于PowerMILL浏览器中，如图1所示，没有工具栏也没有快捷图标，只能通过"NC程序"菜单和NC程序对象菜单进行参数设置。
NC程序生成的主要步骤如下：(1)右键单击产生的每个刀具路径，在弹出的菜单、中选择"产生独立的NC程序";或者右键单击PowerMILL浏览器中的"NC程序"，在弹出的菜单路径，在弹出的菜单中选择"增加到NC程序"选项。
(2)右键单击生成的每个NC程序，在弹出的菜单中选择"写人";或者右键单击Poirer112ILL浏览器中的"NC程序"，在弹出的菜单中选择"全部写人"选项。
2.2 PM-Post后处理PM-Post是Delcam提供的专用后处理模块，其后处理操作步骤如下:(1)在PowerMILL的"选项"中将NC程序输出文件类型改成"刀位"，输出后缀名为cut的刀具路径文件。
(2)启动PM-Post进人PostProcessor模块，如图2所示，分别添加NC程序格式选项文件Option files和第一步产生的刀具路径文件CLDATA Gles.(3)右键单击某个刀具路径文件，在弹出的菜单中选择Process选项，实现该刀具路径文件的NC程序的输出。
可以看出，NC程序方法简单，当程序后处理设置为固定无需改动时，只需要选择相应的后处理选项文件，即可快速生成所需的NC程序代码。
这种方法适用于单位设备固定统一，软件后处理对应性较强的情况。
PM-Post方法不但可以生成所需的NC程序，还可以通过PM-Post中的Editor模块对NC程序格式选项文件进行设置，有利于生成更加简洁高效的NC 程序代码。
这种方法比较适合单位设备的种类型号较多，且自动数控编程由工艺组统一负责，然后再根据设备分配情况生成NC加工程序等场合。
3 PowerMILL后处理设置技巧早期的PowerMILL后处理程序DuctPost以及其它数控编程软件提供的后处理程序大部分都是基于纯文本文档，用户可通过文本编辑器修改这些文件。
该文件结构主要有注释、定义变量类型、定义使用格式、常量赋值、定义问题、字符串列表、自定义单节及系统问题等部分。
最新的PowerMILL后处理程序PM-Post基于图形窗口和对话框，使后处理选项文件的设置变得直观、明了。
PM-Post的格式选项文件的修改在Editor模块中进行，如图3所示。
下面以Fanuc系统为例，给出常用后处理设置的方法:为保留系统自带的Fanuc后处理文件，我们在修改前先将该文件另存为Fanuc OM.pmopt，并在此基础上进行修改。
启动PM-Post，进人Editor模块，点击"Load Option file"快捷图标选中并加载Fanuc.pmopt后处理文件，然后另存为Fanuc OM.pmopt。
后处理的实际应用中，经常需要修改或删除的部分主要有几方面:程序头的修改;程序尾的修改;刀具调用的修改;第四轴的开启与关闭;各种注释部分的删除;钻孔循环的定制;行号的设定与省略;新参数的设定等。
(1)程序头的修改。
选中任务树窗口中的"Fanuc OM.pmopt Commands-Start Program"项，在右边图形窗口中，选中程序中不需要的部分，再点击上方的删除图标，可以删除该部分内容;如程序中默认的机床回参考点程序段"G91G28XOYOZO"，如在程序启动时不必首先回参考点，可删除该段内容。
(2)程序尾的修改。
在任务树窗口中的"Fanuc OM.pmopt-Commands-Finish Program"项中可以定义程序尾部分的内容。
默认的程序尾包含了"G91G28Z0"和"G28XOY0"机床回参考点选项，如不需要也可以删除。
(3)换刀程序段的修改。
选中任务树窗口中的"Fanuc OM.pmopt -Commands-Tool Control-Load First Tool"项，可以通过选中图形窗口中的"M6"项，点击添加"BlockNumber"，使T指令和M6指令分行;同样可以使Change Tool项中的T指令和M6指令分行;如采用手动换刀，则NC程序中不需换刀程序，可右键点击"Load First Tool"和"Change Tool"，在快捷键中选中"Deactivate，以关闭换刀程序。
(4)第4轴的开启和关闭。
选中任务树窗口中的"Fanuc OM.pmopt-Settings-Machine Kinematics"项，右边图形窗口中"KinematicModel"的选项，默认的"3-Axis"项则关闭第4轴;"4-Axis"项则打开第4轴，第4轴打开后，需对其方向、原点及行程范围等进行设置。
(5)各种注释部分的删除。
程序头部分、换刀部分等都设定了相应的注释，如不需要这些注释，可以进人程序头部分、换刀部分，将其中的注释内容选中删除即可。
(6)钻孔循环指令的定制。
打开任务树窗口中的"Fanuc OM.pmopt-Commands-Drilling Cycles"项，这里定义了各种钻销循环。
如其中的"Single Pecking Setup"定义了基本钻削循环G81指令;"Deep Drill Setup"中定义深孔钻削循环G83指令。
如要取消，可右键点击该指令，在快捷键中选中"Deactivate"，即可取消该项定义。
"DrillingCycles"子目录下还有其他钻镬削循环，可根据机床具体情况进行定义或删除。
(7)行号的设定与省略。
点击任务树窗口中的"Fanuc OM.pmopt-Settings-Global Constants"选项，右边图形窗口中"OutputBlock Number，项的"Value"框中的值，默认的为Yes ,显示行号;改为No，则不显示行号;"Block Increment"项为程序行号间距，"Value"值默认的为10，可根据需要修改成适合自己的行号间距。
(8)新参数的设定。
当数控机床的控制系统在PowerMILL自带的后置处理选项文件中没有的时候，就需要重新定义新的控制系统选项文件。
如需专门定义各种常用G,M,F,S代码以及坐标表示等，可在"Fanuc OM.pmopt-Parameters"项中进行。
如，需修改快进G代码G00，可双击"Fanuc OM.pmopt -Parameters -General -MotionMode"，在弹出的对话框中对"RAP状态项后面的"Value"值进行修改，还可以在对话框上半部分的"Prefix"修改快进指令的前缀+G ;如需修改冷却模式的M代码，可双击"Fanuc OM.pmopt-Parameters-General-Coolant Mode"，在弹出的对话框中进行相应修改;主轴转速可在"FanucOM.pmopt-Parameters-General-Spindle Speed"中进行。
4基于宏的后处理快速定制在PowerMILL的应用过程中，一般软件自动编程所对应的机床控制系统都是固定不变的，如果每次启动都对NC程序的后处理进行相同的设置则显得较麻烦。
利用PowerMILL自带的宏的编制，可以实现每次软件启动后自动进行NC程序后处理的默认定制，加速NC程序代码的生成，简化NC程序生成过程。
PowerMILL默认每次启动后会自动运行的宏"pmuser.mac"保存在程序安装目录下"X:1ProgramFiles\Delcam\PowerMILL6008\lib\macro"。
其中"X"代表PowerMILL的安装根目录。
这里可以采用宏将固定不变的NC程序后处理相关设置步骤记录下来，实现程序启动后自动加载默认的后处理定制。
如:希望每次NC程序后处理默认的机床选项文件为系统自带的"Fanuc.pmopt"，默认的NC程序后缀名改为".nc"，所有NC程序的存放文件夹为"E:\Temp\FANUC"。
具体实现步骤如下:(1)启动PowerMILL后，右键单击浏览器最下端的"宏"，点选"记录"，在弹出的"选取记录宏文件"的对话框中设置好宏的保存目录和文件名，程序开始将后面的每一步操作都记录在宏文件中。
(2)打开菜单"工具-选项"，在弹出的"选项表格"对话框中的"NC程序"标签下，"文件类型"选择"NC程序"，"选项文件"选择"Fanuc"，后缀名"tap"改为+nc;，路径输人"FANUC".(3)右键点击浏览器中的"NC程序"，选"参数选择"，在弹出的"NC参数选择"对话框中的"输出目录"中输人"E:/1emp"，在"机床选项文件"中找到"Fanuc.pmopt"的存放路径，本机存放路径为"D:/ProgramFiles/Delcam/PMPost40001fi1e/Genetic/Fanuc.pmopt"。