EBF16685_README
KSZ8851-16MLL DEMO BOARD 48-PIN ETHERNET CONTROLLE
SD13
SD7 40
CPU_D14 3
6
SD14
SD8 39
CPU_D15 4
5
SD15
SD9 36
SD10 35
33
SD11 34
CPU_CMD
33
SD12 33
R10
SD13 32
CPU_CSN
33
SD14 31
R12
SD15 30
CPU_WRN
33
CMD
11
R14
CPU_RDN
33
CSN
12
R16
5 6 7 8
TANT
C27
R28 10uF
470pF 2.49K
Power 3.3V 0.1uF (red LED)
CSN CMD
4.7K R27 4.7K R29
GBLC03C_0 D3
GND 2 GND
VR 5 3.3VA
INTRN 4.7K R30
VOUT = 1.24 X [ 1 + ( 2.49k/ 1.5K ) ]
5
4
3
KSZ8851-16MLL (48-pin) Demo Board Black Diagram
D
Headers 20x2
RJ45
LAN1 T
KSZ8851-16MLL
Reset
Power
+1.8V
+2.5V
+3.3V
STATUS LEDs
OSC
EEPROM
C
MIC5209YM
25 MHz
AT93C46
x2
2
1
DATE:
第三方路由器固件支持的路由列表
DD WRT目录DD WRT (1)Supported Devices (3)[edit]3com (3)[edit]Abocom (3)[edit]Accton (4)[edit]Aceex (4)[edit]Actiontec (4)[edit]ADI Engineering (4)[edit]Airlink 101 (5)[edit]Airlive / Ovislink (5)[edit]Alfa Networks (6)[edit]Allnet (6)[edit]Anaptyx Wireless Dynamics (7)[edit]Arada Systems (8)[edit]Askey (8)[edit]Asus (8)[edit]Belkin (11)[edit]Bountiful (13)[edit]Browan (13)[edit]Buffalo (13)[edit]Cisco (16)[edit]Conceptronic (22)[edit]Compex (23)[edit]Conrad Elektronic (27)[edit]Corega (27)[edit]Dell (28)[edit]Devolo (28)[edit]Digitus (29)[edit]D-Link (29)[edit]Doodle Labs (31)[edit]Dynex (31)[edit]Edimax (31)[edit]Encore (32)[edit]EnGenius (32)[edit]Exel Networks (32)[edit]Fluidmesh (32)[edit]FON (33)[edit]Fry's Electronics (33)[edit]Gateway (34)[edit]Gateworks (34)[edit]Intellinet (Reichelt) (36)[edit]Iomega (36)[edit]JJPlus (36)[edit]Lanready (37)[edit]Linksys (38)[edit]Logilink (38)[edit]MagicBox (38)[edit]Meraki (38)[edit]Microsoft (39)[edit]Mikrotik Routerboard (39)[edit]Mitsubishi (39)[edit]Motorola (40)[edit]MSI (40)[edit]MTN Electronics (40)[edit]NewMedia (40)[edit]NetComm (41)[edit]NETCORE (41)[edit]PC-Engines (46)[edit]Planex aka PCi (46)[edit]Ravo (46)[edit]RayTalk (46)[edit]Repotec (47)[edit]RFNet Technologies (47)[edit]Rosewill (47)[edit]Senao / EnGenius (48)[edit]Siemens (50)[edit]Sitecom (51)[edit]Snapgear (52)[edit]SOEKRIS Engineering (52)[edit]SparkLAN (53)[edit]Straight Core (53)[edit]Technaxx (53)[edit]Techniclan (54)[edit]Tonze (54)[edit]Toshiba (54)[edit]Tranzeo (54)[edit]TP-Link (55)[edit]TRENDnet (57)[edit]T&W (58)[edit]Ubiquiti (59)[edit]US Robotics (62)[edit]Valemount (63)[edit]Verizon (64)[edit]Viewsonic (65)[edit]VSCOM (65)[edit]Watchguard (65)[edit]WiliGear (66)[edit]WinStars (66)[edit]Wistron (66)[edit]ZCOM (67)OPEN WRT (67)支援的裝置- 路由器類型 (67)評估板/無品牌主機板 (67)3Com (67)Abicom International (67)Actiontec (67)Accton (68)Alcatel-Sbell (68)ALFA Network (68)Allnet (68)ARC Flex (68)Arcadyan (68)Astoria (68)Asus (69)Atmel (70)Avm (70)Aztech (70)Belkin (70)Buffalo (70)CEEDTec (71)Catch Tec (71)Compex (71)Comtrend (71)D-Link (72)Dragino (73)Edimax (73)Engenius (73)Fon (73)Linksys (75)Meraki (76)Netgear (76)PC Engines (77)Planex (78)Qemu (78)Qi hardware (78)Redwave (78)Sagem (78)Scientific Atlanta (78)Sercom (78)Skyline (79)SimpleTech (79)Siemens (79)Sitecom (79)SMC (79)Sparklan (79)Telsey (79)Tenda (79)Texas Instruments (80)Thomson (80)TP-Link (80)Trendnet (82)T-Com / Telekom (82)Ubiquiti (82)Unbranded (83)Upvel (83)Zcomax (83)ZyXEL (84)支援硬體- 開發板, 電話 (84)At91 SoC (84)Freescale (中譯：飛思卡爾) (84)開發中 (84)Tomato DualWAN (84)Tomato (86)Supported Devices[edit]Abocom[edit]Accton[edit]Aceex[edit]Askey[edit]Conrad Elektronic[edit]Corega[edit]Doodle Labs[edit]Dynex[edit]Encore[edit]Fry's Electronics[edit]Gateway[edit]Intellinet (Reichelt)[edit]Microsoft[edit]Mitsubishi[edit]Motorola[edit]MSI[edit]MTN Electronics[edit]NewMedia[edit]Nokia[edit]OpenMesh[edit]Ravo[edit]Rosewill。
MGate 5118系列快速安装指南说明书
P/N: 1802051180012 *1802051180012*MGate 5118 Series Quick Installation GuideVersion 1.2, January 2021Technical Support Contact Information/support2021 Moxa Inc. All rights reserved.OverviewThe MGate 5118 is an industrial Ethernet gateway for J1939-to-Modbus RTU/ASCII/TCP, PROFINET and EtherNet/IP network communications. Package ChecklistBefore installing the MGate 5118, verify that the package contains the following items:• 1 MGate 5118 gateway•Quick installation guide (printed)•Warranty cardPlease notify your sales representative if any of the above items is missing or damaged.Optional Accessories (can be purchased separately)•Mini DB9F-to-TB: DB9-female-to-terminal-block connector •WK-51-01: Wall-mounting kit, 51 mm wideHardware IntroductionLED IndicatorsLED Color DescriptionPWR 1, PWR 2 Green The power cable is connected Off The power cable is disconnectedReady Off Power is off or a fault condition existsGreen Steady on: Power is on, and the unit is functioningnormallyBlinking: The unit is responding to the software’sLocate functionRed Steady on: Power is on, and the unit is booting upBlinking: Indicates an IP conflict, or the DHCP orBOOTP server is not responding properlyFlashing quickly: the microSD card failedLAN Green(Flashingonly) The Ethernet port is receiving or transmitting data Modbus TCP Client:Modbus communication in progressModbus TCP Server:Modbus communication in progressEIP Scanner:I/O is exchanging data with at least one device EIP Adapter: I/O is exchanging data PROFINET: PROFINET I/O interface is exchanging dataLED Color DescriptionRed (Flashing only) A communication error occurredModbus TCP Client:1.Received an exception code or framing error(parity error, checksum error)mand timeout (slave device is notresponding)3.TCP connection timeoutModbus TCP Server:1.Received an invalid function code or framing error(parity error, checksum error)2.Accessed invalid register address or coil address Ethernet/IP Scanner:mand timeout (the adapter is not responding)2.TCP connection timeoutEthernet/IP Adapter:The connection was refused due to incorrect configurationOff No communicationMB* Green(Flashingonly)Modbus is receiving or transmitting dataRed (Flashing only) A communication error occurredMaster Mode:1.Received an exception code or framing error(parity error, checksum error)mand timeout (the slave device is notresponding)Slave Mode:1.Received an invalid function code or framing error(parity error, checksum error)2.Accessed invalid register address or coil addressOff No communicationCAN Green(Flashingonly) CANbus(J1939) communication is receiving or transmitting dataRed (Steady) A communication error occurred1.The J1939 address claim failed2.CAN is in bus-off state because the error counter isexceeding its limitationsOff No communicationEth1, Eth2 Green Indicates an 100 Mbps Ethernet connection Amber Indicates a 10 Mbps Ethernet connection Off The Ethernet cable is disconnected*Only indicates serial communication status; for Modbus TCP status, please refer to LAN LED indicator.DimensionsUnit = mm (inch)Reset ButtonRestore the MGate to factory default settings by using a pointed object (such as a straightened paper clip) to hold the reset button down until the Ready LED stops blinking (approximately five seconds).Pull-high, Pull-low, and Terminator for RS-485 and CANOn the MGate 5118’s left side panel, you will find DIP switches to adjust each CAN port or serial port’s pull-high resistor, pull-low resistor, and terminator.SWCANMODBUS1 2 3 12 3 Pull-high resistor Pull-low resistor TerminatorPull-highresistorPull-lowresistor TerminatorON Reserved120 Ω(default)1 kΩ1 kΩ120 ΩOFF –150 kΩ(default)150 kΩ(default)– (default)Hardware Installation Procedure1. Connect the power adapter. Connect the 12-48 VDC power line orDIN-rail power supply to the MGate 5118’s terminal block.2. Use a serial cable to connect the MGate to the Modbus or CAN device.3. Use an Ethernet cable to connect the MGate to the Modbus,Ethernet/IP or PROFINET device.4. The MGate 5118 is designed to be attached to a DIN rail or mountedon a wall. For DIN-rail mounting, push down the spring and properly attach it to the DIN rail until it “snaps” into place. For wall mounting, install the wall-mount kit (optional) first and then screw the device onto the wall. The following figure illustrates the two mounting options:Software Installation InformationYou can download the User's Manual and DSU (Device Search Utility) from Moxa's website: . Please refer to the User’s Manual for additional details on using the Device Search Utility. The MGate 5118 also supports login via a web browser. Default IP address: 192.168.127.254 Default account: admin Default password: moxaPin AssignmentsModbus Serial Port (Male DB9)PinRS-232RS-422/ RS-485 (4W)RS-485 (2W) 1 DCD TxD-(A) – 2 RXD TxD+(B) –3 TXD RxD+(B) Data+(B)4 DTR RxD-(A) Data-(A) 5* GND GND GND 6 DSR – – 7 RTS – – 8 CTS – – 9 – ––*Signal groundCAN Port (6-pin Terminal Block)Pin CAN 1 CAN_L 2 CAN_H 3 CAN Signal GND 4 Ext-CAN_L* 5 Ext-CAN_H* 6 CAN_SHLD* For the CAN port, plug CAN_L and CAN_H into the terminal block. If another device is connected to the same CAN bus, use the Ext_CAN_L and Ext_CAN_H as extension pins.Ethernet Port (RJ45) Pin Signal 1 Tx+ 2 Tx- 3 Rx+ 6Rx-Console Port (RS-232)The MGate 5118 series can use a RJ45 serial port to connect to a PC to configure the device. PinSignal 1 DSR 2 RTS 3 GND 4 TXD 5 RXD 6 DCD 7 CTS 8DTRPower Input and Relay Output PinoutsV2+V2-V1+V1-ShieldedGroundDC Power Input 2 DCPower Input 2 N.O.CommonN.C. DC Power Input 1 DCPowerInput 1SpecificationsPower RequirementsPower Input 12 to 48 VDCPower Consumption 416mA@12VDC, 195mA@24VDC,110mA@48VDCOperating Temperature Standard model:0 to 60°C (32 to 140°F)Wide temperature model:-40 to 75°C (-40 to 167°F)Ambient Relative Humidity 5 to 95% RHDimensions 45.8 x 105 x 134 mm (1.80 x 4.13 x 5.27 in) ReliabilityAlert Tools Built-in buzzer and RTCMTBF 727,873 hrs.NOTE In the following section, ATEX and C1D2 certifications will be detailed separately.ATEX Information1.DEMKO Certificate number: 17 ATEX 1848XIECEx Certificate number: IECEx UL 17.0019X2.Ambient Temperature Range:0°C to 60°C (for models without suffix –T)-40°C to 75°C (for models with suffix –T only)3.Certification String: Ex nA nC IIC T4 Gc4.Standards Covered: EN 60079-0:2012+A11:2013/IEC 60079-0 6thEd. AND EN 60079-15:2010/IEC 60079-15 4th Ed.5.The conditions of safe use:a.The equipment shall be installed in an enclosure that provides adegree of protection not less than IP 54 in accordance withIEC/EN 60079-15 and accessible only by the use of a tool.b.Devices are for use in an area of not more than pollution degree2 in accordance with IEC/EN 60664-1.c.Provisions shall be made, either in the equipment or external tothe equipment, to prevent the rated voltage from being exceededby the transient disturbances of more than 140% of thepeak-rated voltage.Installation instructionsa.When wiring the relay contact (R), digital input (DI), and powerinputs (P1/P2), we suggest using AWG (American Wire Gauge) 12-28(0.0804-3.31 mm²) as a cable and the corresponding pin-type cableterminals. The connector can withstand a maximum torque of 4.5 inch-pounds.b.Conductors suitable for use in an ambient temperature of 85°C mustbe used for the power input terminal block.c.The cross-sectional area of the earthing conductors shall be at least3.31 mm²C1D2 Information1.These devices are open-type devices that are to be installed in anenclosure only accessible with the use of a tool and suitable for the environment.2.This equipment is suitable for use in Class I, Division 2, Groups A, B,C, and D or non-hazardous locations only.”Moxa Inc.No. 1111, Heping Rd., Bade Dist., Taoyuan City 334004, Taiwan。
Speedybee F405 WING FC Board User Manual
Specification overviewSpeedybeeF405 WING APPPart1 -OverViewSpeedybee APP Installation guide FacebookAssembly InstructionsM2x4 smallhead cross screwThe direction ofthe arrow is themachine headWireless BoardFC BoardPDB BoardM3x8.1 mmSilicone GrommetsM2 x 12 copperStandoff SpacerM3x4 mmSilicone GrommetsABC1.Align the pin headers between boards andthen press the two boards together tightly.2.Install both boards and onto board ,and tighten the screws.A BA B CAssembly orderABCCFC Board FrontPart2-hardware descriptionLayoutDigital airspeedsensor connectorAnalog VTX solder padsThe default power supply is 9V. Ifthe VTX can only be powered by5V, please change the PDB board'sVTX BEC to output 5V.Telemetry modulesolder padsTelemetry moduleconnectorRS SI sol de r p ad sSBUS inputpin headersMotor and servo outputpin headers MicroSD cardslotDigital VTXsolder padsAnalog camera solder padsAnalog airspeedsensor connectorELRS receiver pin headers same asthe Telemetrymodule connectorAnalog RSSI signalinput, supportsup to 3.3VWith inversioncircuit, connectedto RX2PWM1-11The default power supply is 9V. Ifthe camera can only be poweredby 5V, please connect the powersupply to the 5V solder pad.Built-in voltage divider circuit,supports up to 6.6V.Use these pin headers to connectthe ELRS/TBS receiver.GPS moduleFC Board BackSH1.0 6PAnalog cameraconnectorGPS module connectorAirspeed sensorsolder padsUSB extenderconnectorDigital VTXconnectorConnect to the PDBboardUART6 solderpadsVTXT G9VNCCAMGND9VSBUSGNDRX5TX5G9SDASCL4V5G T RSH1.0 4PThe signals are thesame as theairspeed sensorconnector.Analog VTX connectorUSB extender frontBuzzer USB TYPE-C PortBuzzer mute switchoperating state, the BOOTbutton is also used forcontrolling otherfunctions of thewireless board.FC RGB statusindicator BOOT buttonFC board connectorPDB board FrontConnect as shownin the diagramNote: TX800 requires5V power supply.VTX BEC voltageselection jumperServo BEC voltageselection jumper 12V outputDefault 9V output5V output6V outputDefault 5V output7.2V outputDO NOT connect ESC BEC outputto Vx pad (Red wire in middle ofconnector).4-level battery level indicator.Note: disconnect the UART6 jumper onthe back of the wireless board to useTX6 RX6. TX1 RX1 shares the same signalas the ELRS/TBS receiver pin header.Wireless status indicator (RGB LED)LED mode indicator(orange LED):, and Wireless board FrontLED mode indicator(orange LED)Battery LED：BLE not connectedGreen solid:BLE connected successfullyWhite slow flashing :Wi-Fi not connectedWhite Solid:Wi-Fi connected successfullyBlue slow flashing:Classic Bluetooth SPP not connectedBlue Solid:Classic Bluetooth SPP not connectedRGB LED off: Wireless module turned offPressing the BOOT button for 6 seconds can switch between the 4wireless modes. When the yellow LED flashes rapidly and the boardautomatically restarts, the switch is successful.Orange light always on:Solid orange LED means the 4 sets of LEDstrips are in SB_LED mode, controlled by the wireless chip.A short press of the BOOT button cycles through different displayeffects when the FC is operating normally.Orange light is off - Off orange LED indicates FC_LED mode, wherethe FC controls the 4 sets of LED strips directly.Press and hold the BOOT button for 3 seconds to switch betweenFC_LED mode and SB_LED mode.The maximum power supply for theLED connector is about 5.2V 1.3A.When the power exceeds the limit,the resettable fuse will cut off thepower supply. Please reduce thenumber of light beads appropriatelywhen the power exceeds the limit.Taking SpeedyBee Programable2812 Arm LED strips as an example,a total of 17 LED strips can beinstalled, including approximately68 light beads.LED strip connectorUART6 jumperSH1.0 3PSH1.0 3PSH1.0 3PWiring DiagramUSB extenderSR ST4S2S1VX VX4V5G G GGGGGGGVXVXVXVXVXVXS3S4S5S6S7S8SR14V5GND5VT4R4G8I428P7AA12203T E L EM2/4Wireless boardFC boardPDB boardPower supplyThe power distribution logic for the F405 WING APP is as follows:1、 The 9V pad uses a VTX&CAM BEC for power supply. When the VTX&CAM BEC switches to another voltage through the pad jumper, the 9V pad will output the corresponding voltage.2、The Vx pin headers use a Servo BEC for power supply. When the Servo BEC switches to anothervoltage through the pad jumper, the Vx pin headers will output the corresponding voltage.3、The default voltage for the FC BEC is 5.2V, with power output divided into three directions:·The first path directly outputs to the 5V pad.·The second path outputs to the onboard chip and 4V5 pad through a diode.·The third path outputs to the LED connector through a self-recovering fuse and reverse connection protection circuit.The limit for the LED connector power supply is approximately 68 pieces of SpeedyBee 5050 LED strip beads. Do not exceed this limit.To test if other brands of LED strips meet the power requirements, you can take the following steps:·After connecting the LED strip, let the flight controller be powered and idle for 10 minutes. Observe if the color of the LED strip suddenly dims and feel the wireless board with your hand. If it feels very hot, the power supply is insufficient, and you need to reduce the number of LED beads.·You can also use a multimeter to test the voltage of the 5V pad or the LED strip power pad. If thevoltage is below 5V, it indicates that the power supply is insufficient, and you need to reduce thenumber of LED beads.Note: If your ESC supports BEC output, do not connect the ESC BEC red wire to the Vx pinheaders, as this may burn the ESC or Servo BEC.Please note that the FC BEC can provide a continuous current of 2.4-2.5A and a peak current of 3A. The onboard chip requires less than 1A of power, GPS and receivers generally require less than 0.1A, and the wireless controller requires 0.1A.If the LED connector uses a maximum of 1.3A, the 5V pad will have no remaining capacity.If the LED connector is not used, the 5V pad will have a 1.3A surplus.APP connectionPart3-Firmware upgrade andAPP connection①Press and hold the BOOT button , andconnect the FC to the computer viaUSB cable.②Open the INAV Configurator on yourcomputer, go to the "Firmware Flasher "page, select the flight controller targetas "SPEEDYBEEF405WING", and thenflash the firmware.③To flash Ardupilot firmware, follow thesame steps as above, select "LoadFirmware [local]", and then flashthe firmware.SpeedyBee F405 WING APP not supportingwireless firmware flashing, please update thefirmware on a computer. Follow these steps:Check the color of the wireless status indicator. If it's not flashingwhite, press the BOOT button for 6 seconds to switch to white.Then connect to the "Speedybee F405Wing" Wi-Fi and openQGroundControl, it will automatically connect.Firmware upgradeConnecting Ardupilot firmware to QGroundControl app.Check the color of the wireless statusindicator .If it's slow flashing green, open theSpeedyBee app and follow thesteps to connect to thecorresponding product.Connecting INAV Firmware toSpeedybee APP.23APP ConnectionSuitable for different flight control firmware and Configurator. The supported apps are listed in thefollowing table. It is recommended to use Bluetooth BLE mode for iNav and WiFi mode for Ardupilot.Part4-SpecificationsSpeedyBee F405 WING FC board STM32F405,168MHz,1MB FlashICM-42688-P SPL006-001AT7456EMicroSD Card Slot6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))1x Used for magnetometer, digital airspeed sensor 4x (VBAT, Current, RSSI, Analog AirSpeed)12x (11+1“LED”pad)Supported,connected to UART1Built in inverter for SBUS input (UART2-RX)3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB Supported,Named as RS .INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WINGMCUIMU(Gyro&Accelerometer) Barometer OSD Chip Blackbox UART I2C ADC PWMELRS/CRSF receiver SBUS LED RSSISupported FC FirmwareSpeedyBee F405 WING PDB boardInput voltage range Battery Voltage Sensor Battery Current Sensor TVS Protective diode FC BEC outputVTX BEC output OutputServo BEC output 7~36V (2~6S LiPo)Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOL T_MUL T 11.0 in ArduPilot)90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)YesOutput 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_StripOutput 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A PeakVoltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designedfor Servos.BLE mode, connect to Speedybee APPClassic Bluetooth SPP mode, connect to QGroundControl APP , MissionPlanner4x WS2812 LED strip connectors, adjustable colors and flashing modesMax 5.2V 1.3A, supports around 68pcs 5050 WS2812 LED beads4x RGB indicator LED for battery level display by number of lightsWireless Configuration(long press BOOT button for 6 seconds to switch modes)LED strip controller (short press BOOT button to switch effects, long press 3 seconds to switch modes)On-board battery level indicator Wi-Fi mode, connect to QGroundControl APP , Speedybee APP , MissionPlanner, etc.SpeedyBee F405 WING Wireless boardPart5-pin mappingUART USB TX1 RX15V tolerant I/OUART1ELRS/TBS receiverSBUS receiver, SBUS pad = RX2 with inverter SmartPort Telemetry,enable Softserial_Tx2GPS USER DJI OSD/VTXOnboard wireless controllerTX3 RX35V tolerant I/O UART3TX4 RX45V tolerant I/O UART4TX5 RX55V tolerant I/O UART5TX6 RX65V tolerant I/OUART6TX2 RX2SBUS 5V tolerant I/OSBUS padTX2USB INAV mappingPWM TIMER INAV Plane INAV MultiRotor S1TIM4_CH2Motor Motor 5V tolerant I/O S2TIM4_CH1Motor Motor 5V tolerant I/O S3TIM3_CH3Servo Motor 5V tolerant I/O S4TIM3_CH4Servo Motor 5V tolerant I/O S5TIM8_CH3Servo Motor 5V tolerant I/O S6TIM8_CH4Servo Motor 5V tolerant I/O S7TIM8_CH2N Servo Servo 5V tolerant I/O S8TIM2_CH Servo Servo 5V tolerant I/O S9TIM2_CH4Servo Servo 5V tolerant I/O S10TIM2_CH1Servo Servo 5V tolerant I/O S11TIM12_CH2Servo Servo 5V tolerant I/O LEDTIM1_CH1WS2812LEDWS2812LED5V tolerant I/OADCVBAT CURR AIRSPD RSSIVBAT ADCADC_CHANNEL_1CURRENT_METER ADC ADC_CHANNEL_2AIRSPEED ADC ADC_CHANNEL_3RSSI ADCADC_CHANNEL_4voltage scale 11001K:10K divider builtin 0~30V 0~3.3V10K:10K divider builtin 0~6.6V 0~3.3VCurrent scale 195Analog Airspeed Analog RSSII2CI2C1onboard BarometerCompassDigital Airspeed sensor OLEDSPL06-001QMC5883 / HMC5883 /MAG3110 / LIS3MDL MS45250.96″5V tolerant I/OArduPilot mappingUSB TX1 RX1TX2 RX2SBUSTX3 RX3TX4 RX4TX5 RX5TX6 RX6USBUSART1(With DMA)SBUS pad RX2USART2USART3UART4UART5USART6SERIAL0SERIAL1BRD_AL T_CONFIG 0DefaultBRD_AL T_CONFIG 1SERIAL2SERIAL3SERIAL4SERIAL5SERIAL6ConsoleELRS/TBS receiver Serial RC inputSBUS receiver,SBUS pad = RX2 with inverter IBUS/DSM/PPM USER GPS1USER DJI OSD/VTX Telem1*If sending highspeed serial data (eg. 921600 baud) to the board, use USART1(Serial1).PWM S1S2S3S4S5S6S7S8S9S10S11LEDPWM1 GPIO50PWM2 GPIO51PWM3 GPIO52PWM4 GPIO53PWM5 GPIO54PWM6 GPIO55PWM7 GPIO56PWM8 GPIO57PWM9 GPIO58PWM10 GPIO59PWM11 GPIO60PWM12 GPIO61TIMER TIM4_CH2TIM4_CH1TIM3_CH3TIM3_CH4TIM8_CH3TIM8_CH4TIM8_CH2N TIM2_CH3TIM2_CH4TIM2_CH1TIM1_CH3N TIM1_CH1PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)PWM/DShot(DMA)Group1Group2Group3Group4Group5*All motor/servo outputs are DShot and PWM capable. However, mixing DShot and normal PWM operation for outputs is restricted into groups, ie. enabling DShot for an output in a group requires that ALL outputs in that group be configured and used as DShot, rather than PWM outputs. LED, which corresponds to PWM12, is set as the default output for NeoPixel1. Therefore, if you need to use PWM11 as an output, you need to disable the NeoPixel1 function on PWM12.ADCVBATCURRAIRSPDRSSIBattery voltageCurrent senseAnalog AirspeedAnalog RSSIBATT_VOL T_PINBATT_VOL T_MUL TBATT_CURR_PINBATT_AMP_PERVL TARSPD_ANA_PINARSPD_TYPERSSI_ANA_PINRSSI_TYPE1011.051150152142 1K:10K divider builtin0~30V0~3.3V10K:10K divider builtin0~6.6V0~3.3VI2CI2C1onboard BarometerCompassDigital Airspeed sensorMS4525ASP5033SPL06-001COMPASS_AUTODECARSPD_BUSARSPD_TYPEARSPD_TYPE115 5V tolerant I/OPart7-PackageM2x4 small head4pin Dupont single-headCable(150mm) x18pin SH1.0 USB4pin SH1.0 to 3+2pin JST1.25 FPV CamCable(250mm) x1。
建荣CW6685单芯片蓝牙芯片方案设计
建荣CW6685单芯片蓝牙芯片方案设计资源介绍*支持MP3，wav，wma*支持最大（64G）SD TF U盘*支持USB mass storage 读卡器，声卡功能控制电脑声音，上下曲，播放暂停*支持语音提示，可以自定义语音*支持文件夹切换，文件夹选择*支持全盘，文件夹，单曲，随机循环*支持EQ功能，正常，摇滚，流行，古典，爵士等，可自定义EQ调节音效*支持录音，及扩音器功能，内置混响IC*支持蓝牙通话，数字拨号*支持歌曲文件加密*支持PT2313 2358，做2.1/5.1音箱*支持1628,1621等屏驱*支持IIC协议，uart协议，spi协议或自定义协议完成通讯*支持呼吸灯，频谱灯，完美的闪灯效果产品简介蓝牙作为无线领域的一个标杆，应用越来越广，蓝牙产品也越来越多样化，随着手机蓝牙的普及，蓝牙产品深入到各个领域，蓝牙多媒体设备更是受到了大众的青睐，成为主流。
CW6680/ 1采用建荣集成的性能优越的蓝牙IC CW6680/1用来接收从音频发射源端发射的无线音频信号，如手机、蓝牙适配器等，接收到的数据传送给解码IC；具有优势的性能，局限小，方案适用性更强。
特点·基于CLASS 2 功率等级，采用Bluetooth 2.1+EDR 规范，兼容蓝牙3.0及以下版本应用。
·支持L2CAP/A2DP(AVCTP/AVDTP/AVRCP) ，用来接收立体声音频信号，通过协议可以控制音频发射端的上下曲操作·支持简易配对，不需输入配对密码，支持自动回连功能·更宽的工作电压范围（2.2V~5V）·采用调试好的PCB 天线，无需重新匹配天线·支持低功耗模式sniff mode，stop mode·配合建荣的三解码IC AX2227使用，可以实现MP3 BOOMBOX 所有功能基础上，添加蓝牙音频播放功能，功能更加齐全，还可支持显示功能。
DrayTek Vigor2865 35b Security Firewall Quick Star
Vigor286535b Security Firewall Quick Start Guide (for Wired Model)Version: 1.7Firmware Version: V4.4.2(For future update, please visit DrayTek web site)Date: June 27, 2023Intellectual Property Rights (IPR) InformationCopyrights © All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored ina retrieval system, or translated into any language without written permissionfrom the copyright holders.Trademarks The following trademarks are used in this document:●Microsoft is a registered trademark of Microsoft Corp.●Windows 8,10, 11 and Explorer are trademarks of Microsoft Corp.●Apple and Mac OS are registered trademarks of Apple Inc.●Other products may be trademarks or registered trademarks of theirrespective manufacturers.Safety Instructions and ApprovalSafety Instructions ●Read the installation guide thoroughly before you set up the router.●The router is a complicated electronic unit that may be repaired only beauthorized and qualified personnel. Do not try to open or repair therouter yourself.●Do not place the router in a damp or humid place, e.g. a bathroom.●Do not stack the routers.●The router should be used in a sheltered area, within a temperaturerange of +5 to +40 Celsius.●Do not expose the router to direct sunlight or other heat sources. Thehousing and electronic components may be damaged by direct sunlight or heat sources.●Do not deploy the cable for LAN connection outdoor to prevent electronicshock hazards.●Do not power off the router when saving configurations or firmwareupgrades. It may damage the data in a flash. Please disconnect theInternet connection on the router before powering it off when a TR069/ ACS server manages the router.●Keep the package out of reach of children.●When you want to dispose of the router, please follow local regulations onconservation of the environment.Warranty We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of two (2) yearsfrom the date of purchase from the dealer. Please keep your purchase receiptin a safe place as it serves as proof of date of purchase. During the warrantyperiod, and upon proof of purchase, should the product have indications offailure due to faulty workmanship and/or materials, we will, at our discretion,repair or replace the defective products or components, without charge foreither parts or labor, to whatever extent we deem necessary tore-store theproduct to proper operating condition. Any replacement will consist of a newor re-manufactured functionally equivalent product of equal value, and willbe offered solely at our discretion. This warranty will not apply if the productis modified, misused, tampered with, damaged by an act of God, or subjectedto abnormal working conditions. The warranty does not cover the bundled orlicensed software of other vendors. Defects which do not significantly affectthe usability of the product will not be covered by the warranty. We reservethe right to revise the manual and online documentation and to make changesfrom time to time in the contents hereof without obligation to notify anyperson of such revision or changes.EU Declaration of ConformityWe DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our soleresponsibility that the product●Product name: VDSL2 Security Firewall●Model number: Vigor2865●Manufacturer: DrayTek Corp.●Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan.is in conformity with the relevant Union harmonisation legislation:EMC Directive 2014/30/EU , Low Voltage Directive 2014/35/EU , ErP 2009/125/EC and RoHS2011/65/EU with reference to the following standardsStandard Version / Issue dateEN 550322012+AC:2013 class BEN 61000-3-22014 Class AEN 61000-3-32013EN 550352017+A11:2020EN 62368-12014+A11:2017EC No. 1275/2008 2008Hsinchu2nd September, 2019Calvin Ma / President .Signature)(place) (date)(LegalDeclaration of ConformityWe DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our soleresponsibility that the product●Product name: VDSL2 Security Firewall●Model number: Vigor2865●Manufacturer: DrayTek Corp.●Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan●Importer: CMS Distribution Ltd: Bohola Road, Kiltimagh, Co Mayo, Irelandis in conformity with the relevant UK Statutory Instruments:The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI2016 No.1101), The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019 (SI2019 No.539) and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations2012 (SI 2012 No. 3032) with reference to the following standards:Standard Version / Issue dateEN 550322012+AC:2013 class BEN 61000-3-22014 Class AEN 61000-3-32013EN 550352017+A11:2020EN 62368-12014+A11:2017EC No. 1275/2008 2008Hsinchu2nd September, 2019Calvin Ma / President .Signature)(Legal (place) (date)Regulatory InformationFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:● Reorient or relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device may accept any interference received, including interference that may cause undesired operation.Company nameABP International Inc.Address 13988 Diplomat Drive Suite 180 Dallas TX 75234 ZIP Code 75234 E-mail*******************USA Local RepresentativeContact PersonMr. Henry N CastilloTel. (972)831-1600 140Caution:Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.More update, please visit .*The external power supply used for each product will be model dependent.1 2 3 4 5 6 7 8 9 AManufacturer CWT CWT CWT CWT CWT APD APD APD APDB Address No. 222, Sec.2, Nankan Rd.,LujhuTownship,TaoyuanCounty 338,TaiwanNo. 222, Sec.2, Nankan Rd.,LujhuTownship,TaoyuanCounty 338,TaiwanNo. 222, Sec.2, Nankan Rd.,LujhuTownship,TaoyuanCounty 338,TaiwanNo. 222, Sec.2, Nankan Rd.,LujhuTownship,TaoyuanCounty 338,TaiwanNo. 222, Sec.2, Nankan Rd.,LujhuTownship,TaoyuanCounty 338,TaiwanNo.5, Lane 83,Lung-Sou St.,Taoyuan City330, TaiwanNo.5, Lane 83,Lung-Sou St.,Taoyuan City330, TaiwanNo.5, Lane 83,Lung-Sou St.,Taoyuan City330, TaiwanNo.5, Lane 83,Lung-Sou St.,Taoyuan City330, Taiwan2ABB012F UK 2ABB018F UK 2ABL024F UK 2ABL030F UK 2ABN036F UK WA-12M12FG WB-18D12FG WA-24Q12FG WA-36A12FGC Model identifier2ABB012F EU 2ABB018F EU 2ABL024F EU 2ABL030F EU 2ABN036F EU WA-12M12FK WB-18D12FK WA-24Q12FK WA-36A12FKDInputvoltage 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V InputACfrequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz EOutputvoltageDC 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V F Outputcurrent 1.0A 1.5A 2.0A 2.5A 3.0A 1.0A 1.5A 2.0A 3.0A GOutputpower 12.0W 18.0W 24.0W 30.0W 36.0W 12.0W 18.0W 24.0W 36.0W H Average activeefficiency84.9% 86.2% 87.6% 87.8% 89.8% 83.7% 85.4% 88.6% 88.2%I Efficiency at low load10%73.6% 78.0% 81.3% 83.3% 83.7% 74.5% 80.5% 86.4% 85.4% J No-loadpowerconsumption0.07W 0.07W 0.07W 0.07W 0.07W 0.07W 0.10W 0.07W 0.10W External power supply (Power Adapter) information. For more update, please visit .T a b l e o f C o n t e n t s1. Package Content (1)2. Panel Explanation (2)3. Hardware Installation (4)3.1 Network Connection (4)3.2 Wall-Mounted Installation (5)4. Software Configuration (6)4.1 Quick Start Wizard for Network Connection (6)5. Customer Service (12)Be a Registered Owner (12)Firmware & Tools Updates (12)1.P a c k a g e C o n t e n tTake a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately.Vigor router Quick Start GuideRJ-45 Cable (Ethernet)RJ-11 to RJ-45 Cable (Annex B)RJ-11 to RJ-11 Cable (Annex A) The type of the power adapter depends on the country that the router will be installed. * The maximum power consumption is 22 Watts.UK-type Power Adapter EU-type Power AdapterUSA/Taiwan-type Power Adapter AU/NZ-type Power Adapter2. P a n e l E x p l a n a t i o nLED Status ExplanationOff The router is powered off.ACTBlinking The router is powered on and running normally.On Internet connection is ready. OffInternet connection is not ready. WAN2Blinking The data is transmitting. On The QoS function is active. QoS Off The QoS function is inactive.On USB device is connected and ready for use. OffNo USB device is connected. USB1~2Blinking The data is transmitting.On The router is ready to access Internet through DSL link.DSLBlinkingSlowly: The DSL connection is ready. Quickly: The connection is training. OnThe Web Content Filter is active. (It is enabled from Firewall >> General Setup ). WCFOffWCF is disabled.OnThe VPN tunnel is active. OffVPN services are disabledVPN BlinkingTraffic is passing through VPN tunnel. OnThe DMZ function is enabled. OffThe DMZ function is disabled. DMZ BlinkingThe data is transmitting.LED on ConnectorOnThe port is connected. Off The port is disconnected. Left LED BlinkingThe data is transmitting.On The port is connected with 1000Mbps. WAN2 / P6Right LED Off The port is connected with 10/100Mbps. OnThe port is connected. Off The port is disconnected. Left LED BlinkingThe data is transmitting.On The port is connected with 1000Mbps. LAN P1~P5Right LED OffThe port is connected with 10/100MbpsThe port “WAN2 / P6” is switchable. It can be used for LAN connection or WAN connection according to the settings configured in WUI.Switch on Rear SideInterface DescriptionFactory Reset Restore the default settings. Usage: Turn on the router(ACT LED is blinking). Press the hole and keep for more than5 seconds. When you see the ACT LED begins to blinkrapidly than usual, release the button. Then the router willrestart with the factory default configuration.USB1~2 Connecter for a USB device (for 3G/4G USB Modem orprinter or thermometer).WAN2 / P6 Connecter for local network devices or modem foraccessing Internet.LAN P1-P5 Connecters for local network devices.DSL Connecter for accessing the Internet.PWR Connecter for a power adapter.Switch.ON/OFF Power3.H a r d w a r e I n s t a l l a t i o nThis section will guide you to install the router through hardware connection and configure the router’s settings through web browser.Before starting to configure the router, you have to connect your devicescorrectly.3.1N e t w o r k C o n n e c t i o n1.Connect the DSL interface to the land line jack with a DSL line cable, orConnect the cable Modem/DSL Modem/Media Converter to the WAN port ofrouter with Ethernet cable (RJ-45).2.Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of therouter and the other end of the cable (RJ-45) into the Ethernet port on yourcomputer.3.Connect one end of the power adapter to the router’s power port on therear panel, and the other side into a wall outlet.4.Power on the device by pressing down the power switch on the rear panel.5.The system starts to initiate. After completing the system test, the ACT LEDwill light up and start blinking. (For the detailed information of LED status,please refer to section 2. Panel Explanation)3.2 W a l l -M o u n t e d I n s t a l l a t i o nVigor router has keyhole type mounting slots on the underside.1. Drill two holes on the wall. The distance between the holes shall be 168mm.2.Fit screws into the wall using the appropriate type of wall plug.NoteThe recommended drill diameter shall be 6.5mm (1/4”).3. When you finished about procedure, the router has been mounted on thewall firmly.4.S o f t w a r e C o n f i g u r a t i o nTo access Internet, please finish basic configuration after completing thehardware installation.4.1Q u i c k S t a r t W i z a r d f o r N e t w o r k C o n n e c t i o nThe Quick Start Wizard is designed for you to easily set up your router forInternet access. You can directly access the Quick Start Wizard via WebConfigurator. Make sure your PC connects to the router correctly.Note You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be thesame subnet as the default IP address of Vigor router192.168.1.1. For the detailed information, please refer to -Trouble Shooting of the user’s guide.Open a web browser on your PC and type http://192.168.1.1. A pop-up window will open to ask for username and password. Please type “admin/admin” as the.Username/Password and click LoginNote If you fail to access to the web configuration, please go to“Trouble Shooting” on User’s Guide for detecting and solvingyour problem.Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard.If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickly. The first screen of Quick Start Wizard is entering login password. After typing the password, please click Next.On the next page as shown below, please select the WAN interface that you use. If DSL interface is used, please choose WAN1; if Ethernet interface is used, please choose WAN2; if 3G USB modem is used, please choose WAN5 or WAN6. Then click Next for next step. WAN1, WAN2, WAN5 and WAN6 will bring up different configuration page. Here, we take WAN1 (ADSL/VDSL2) as an example.Click Next to go to the following page. You have to select the appropriate Internet access type according to the information from your ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. In addition, the field of For ADSL Only will be available only when ADSL is detected. Then click Next for next step.P P P o E/P P P o A1.Choose WAN1 as WAN Interface and click the Next button; you will get thefollowing page.2.After finished the above settings, simply click Next.3.Please manually enter the Username/Password provided by your ISP. Thenclick Next for viewing summary of such connection.4.Click Finish. A page of Quick Start Wizard Setup OK will appear.Then,the system status of this protocol will be shown.5.Now, you can enjoy surfing on the Internet.M P o A/S t a t i c o r D y n a m i c I P1.Choose WAN1 as WAN Interface and click the Next button; you will get thefollowing page.2.Please type in the IP address/mask/gateway information originally providedby your ISP. Then click Next for viewing summary of such connection.3.Click Finish. A page of Quick Start Wizard Setup OK will appear.Then,the system status of this protocol will be shown.4.Now, you can enjoy surfing on the Internet.5.C u s t o m e r S e r v i c eIf the router cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send ***************************.B e a R e g i s t e r e d O w n e rWeb registration is preferred. You can register your Vigor router viahttps://.F i r m w a r e&T o o l s U p d a t e sDue to the continuous evolution of DrayTek technology, all routers will beregularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.https://。
Emulex 16Gb Gen 5 Fibre Channel HBA 产品指南说明书
Emulex 16Gb Gen 5 Fibre Channel AdaptersProduct Guide (withdrawn product)The Emulex 16Gb Fibre Channel (FC) host bus adapters (HBAs) are part of a family of high-performance FC HBA solutions. These Generation 5 HBAs deliver exceptional performance, enabling small and medium businesses to experience unsurpassed robustness and reliability for a wide spectrum of servers, storage, and SANs. These adapters provide an ideal solution for all System x servers requiring high-speed data transfer in disk connectivity for virtualized environments and data-backup, mission-critical applications. Emulex Generation 5 16Gb HBAs now seamlessly supports Brocade ClearLink diagnostics through Emulex HBA Manager (formerly named OneCommand Manager), ensuring the reliability and management of storage network configurations when connected to Brocade Gen 5 FC SAN fabrics. In addition, the adapters can offer end-to-end Quality of Service (QoS) application prioritization with ExpressLane technology.The following figure shows the single-port adapter (SFP+ is not present).Figure 1. Emulex 16Gb FC Single-port HBA (with 3U bracket attached; SFP+ is not present)Did you know?The highly integrated multiprocessor design of the Emulex 16 Gb FC HBA minimizes onboard components and improves host performance and efficiency. Advanced error-checking features ensure the integrity of block data passing through the storage area network (SAN). The Emulex HBA Manager enterprise class management application features a multiprotocol and cross-platform architecture that provides centralized management of all Emulex HBAs. The unique Emulex HBA Manager plug-in for VMware vCenter enables HBAs to be managed directly within the VMware environment, simplifying management.Click here to check for updatesFigure 2. Emulex 16Gb FC Dual-port HBA (with 3U bracket attached; SFP+ are not present)Server supportThe Emulex 16Gb FC Single-port and Dual-port HBAs are supported in the servers that are listed in the following tables.Support for System x and dense servers with Xeon E5/E7 v4 and E3 v5 processors Table 2. Support for System x and dense servers with Xeon E5/E7 v4 and E3 v5 processorsPart number Description81Y1655Emulex 16Gb FC Single-port HBA N N Y Y Y Y N 81Y1662Emulex 16Gb FC Dual-port HBANNYYYY NSupport for System x and dense servers with Intel Xeon v3 processors Table 3. Support for servers with Intel Xeon v3 processorsPart number Description81Y1655Emulex 16Gb FC Single-port HBA Y Y Y Y Y Y Y 81Y1662Emulex 16Gb FC Dual-port HBAYYYYYYY x 3250 M 6 (3943)x 3250 M 6 (3633)x 3550 M 5 (8869)x 3650 M 5 (8871)x 3850 X 6/x 3950 X 6 (6241, E 7 v 4)n x 360 M 5 (5465, E 5-2600 v 4)s d 350 (5493)x 3100 M 5 (5457)x 3250 M 5 (5458)x 3500 M 5 (5464)x 3550 M 5 (5463)x 3650 M 5 (5462)x 3850 X 6/x 3950 X 6 (6241, E 7 v 3)n x 360 M 5 (5465)Operating systemsMicrosoft Windows Server 2008 R2Y Y Y N N Y Y Y Y Y Y Y Microsoft Windows Server 2012Y Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server 2012 R2Y Y Y Y Y Y Y Y Y Y N N Microsoft Windows Server 2016N Y Y Y YY Y Y Y Y Y Y Microsoft Windows Server 2019N N N Y N N N Y N Y N N Microsoft Windows Server version 1709N N Y Y Y Y Y Y Y Y N N Microsoft Windows Server version 1803N N N N N N N Y N Y N N Red Hat Enterprise Linux 5 Server EditionN N N N N N N N N N N Y Red Hat Enterprise Linux 5 Server with Xen x64 Edition N N N N N N N N N N N Y Red Hat Enterprise Linux 5 Server x64 Edition N N N N N N N N N N N Y Red Hat Enterprise Linux 6 Server Edition N N N N N N N N N N N Y Red Hat Enterprise Linux 6 Server x64 Edition Y Y N N Y Y Y Y Y Y N Y Red Hat Enterprise Linux 7Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.0N N N Y N N N N N N N N SUSE Linux Enterprise Server 11 for AMD64/EM64T Y Y Y Y Y Y Y Y Y Y Y N SUSE Linux Enterprise Server 11 for x86N N N N N N N N N N Y N SUSE Linux Enterprise Server 11 with Xen for AMD64/EM64T Y Y Y Y Y Y Y Y Y Y N N SUSE Linux Enterprise Server 12N Y Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 12 with Xen N N Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15N N Y Y Y N N Y N Y N N SUSE Linux Enterprise Server 15 with Xen N N Y Y Y N N Y N Y N N VMware vSphere 5.1 (ESXi)Y Y N N Y Y Y N Y N Y Y VMware vSphere Hypervisor (ESXi) 5.5Y Y N N N Y N Y Y Y N N VMware vSphere Hypervisor (ESXi) 6.0Y Y Y NYY Y Y Y YN YVMware vSphere Hypervisor (ESXi) 6.5Y N Y Y Y YY Y Y Y Y YVMware vSphere Hypervisor (ESXi) 6.7NNNY Y Y NY NY N N[in box driver support only]Please refere LSIC (interop site) for latest Lenovo External Storage support configuration.https:///ca/en/lsic/Detail information please refer to Support Tip HT506708 [Emulex 16G FC adapter can't concurrent work with IBM iboot on legancy mode. Retain Tip H213415 :https:///support/entry/portal/docdisplay?brandind=5000008&lndocid=MIGR-5096509 ]x 3850/3950 X 6 (3837)x 3850/3950 X 6 (6241, E 7 v 2)x 3850/3950 X 6 (6241, E 7 v 3)x 3850/3950 X 6 (6241, E 7 v 4)n x 360 M 5 (5465)x 3500 M 5 (5464)x 3550 M 5 (5463)x 3550 M 5 (8869)x 3650 M 5 (5462)x 3650 M 5 (8871)x 3100 M 5 (5457)x 3250 M 5 (5458)444111444442222223221234Operating systemsMicrosoft Windows Server 2008 R2Y Y Y N N Y Y Y Y Y Y Y Microsoft Windows Server 2012Y Y Y Y Y Y Y Y Y Y Y Y Microsoft Windows Server 2012 R2Y Y Y Y Y Y Y Y Y Y N N Microsoft Windows Server 2016N Y Y Y YY Y Y Y Y Y Y Microsoft Windows Server 2019N N N Y N N N Y N Y N N Microsoft Windows Server version 1709N N Y Y Y Y Y Y Y Y N N Microsoft Windows Server version 1803N N N N N N N Y N Y N N Red Hat Enterprise Linux 5 Server EditionN N N N N N N N N N N Y Red Hat Enterprise Linux 5 Server with Xen x64 Edition N N N N N N N N N N N Y Red Hat Enterprise Linux 5 Server x64 Edition N N N N N N N N N N N Y Red Hat Enterprise Linux 6 Server Edition N N N N N N N N N N N Y Red Hat Enterprise Linux 6 Server x64 Edition Y Y N N Y Y Y Y Y Y N Y Red Hat Enterprise Linux 7Y Y Y Y Y Y Y Y Y Y Y Y Red Hat Enterprise Linux 8.0N N N Y N N N N N N N N SUSE Linux Enterprise Server 11 for AMD64/EM64T Y Y Y Y Y Y Y Y Y Y Y N SUSE Linux Enterprise Server 11 for x86N N N N N N N N N N Y N SUSE Linux Enterprise Server 11 with Xen for AMD64/EM64T Y Y Y Y Y Y Y Y Y Y N N SUSE Linux Enterprise Server 12N Y Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 12 with Xen N N Y Y Y Y Y Y Y Y Y Y SUSE Linux Enterprise Server 15N N Y Y Y N N Y N Y N N SUSE Linux Enterprise Server 15 with Xen N N Y Y Y N N Y N Y N N VMware vSphere 5.1 (ESXi)Y Y N N Y Y Y N Y N Y Y VMware vSphere Hypervisor (ESXi) 5.5Y Y N N N Y N Y Y Y N N VMware vSphere Hypervisor (ESXi) 6.0Y Y Y NYY Y Y Y YN YVMware vSphere Hypervisor (ESXi) 6.5Y N Y Y Y YY Y Y Y Y YVMware vSphere Hypervisor (ESXi) 6.7NNNY Y Y NY NY N N[in box driver support only]Please refere LSIC (interop site) for latest Lenovo External Storage support configuration.https:///ca/en/lsic/Detail information please refer to Support Tip HT506708[Emulex 16G FC adapter can't concurrent work with IBM iboot on legancy mode. Retain Tip H213415 :https:///support/entry/portal/docdisplay?brandind=5000008&lndocid=MIGR-5096509 ]x 3850/3950 X 6 (3837)x 3850/3950 X 6 (6241, E 7 v 2)x 3850/3950 X 6 (6241, E 7 v 3)x 3850/3950 X 6 (6241, E 7 v 4)n x 360 M 5 (5465)x 3500 M 5 (5464)x 3550 M 5 (5463)x 3550 M 5 (8869)x 3650 M 5 (5462)x 3650 M 5 (8871)x 3100 M 5 (5457)x 3250 M 5 (5458)444111444442222223221234TrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®ServerProven®System x®The following terms are trademarks of other companies:Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.Emulex 16Gb Gen 5 Fibre Channel Adapters (withdrawn product)11。
X11 AOM-TPM-9670V AOM-TPM-9670H AOM-TPM-9670V(H)-S
TPM for X11AOM-TPM-9670V AOM-TPM-9670HAOM-TPM-9670V(H)-SUSER’S MANUAL1.2aManual Revision 1.2aRelease Date: October 13, 2022Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document.Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.Copyright © 2022 by Super Micro Computer, Inc.All rights reserved. Printed in the United States of AmericaThe information in this user’s guide has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at .Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software and docu-mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.FCC Statement: Refer to Supermicro's website for FCC Compliance Information.California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See /hazardouswaste/perchlorate”.PrefaceAbout This User's GuideThis user's guide is written for system integrators, IT professionals, and knowl-edgeable end users who wish to add additional data security mechanisms to their systems to protect highly sensitive applications. It provides detailed information on configuring, provisioning, and using the Trusted Platform Module (TPM).User's Guide OrganizationChapter 1 provides an overview of the TPM, including its features and uses.Chapter 2 provides detailed instructions on installing, provisioning, and using the TPM.Conventions Used in This User's GuidePay special attention to the following symbols for proper TPM configuration.Warning: Important information given to avoid TPM configuration errors.Note: Additional information given to ensure correct and proper TPM configuration setup.PrefaceSuper TPM User's GuideContacting SupermicroHeadquartersAddress:Super Micro Computer, Inc.980 Rock Ave.San Jose, CA 95131 U.S.A.Tel:+1 (408) 503-8000Fax:+1 (408) 503-8008Email:************************(GeneralInformation)************************(SalesInquiries)***********************************(Gov.SalesInquiries)**********************(TechnicalSupport)******************(RMASupport)************************(Webmaster)Website:EuropeAddress:Super Micro Computer B.V.Het Sterrenbeeld 28, 5215 ML's-Hertogenbosch, The NetherlandsTel:+31 (0) 73-6400390Fax:+31 (0) 73-6416525Email:***************************(SalesInquiries)*****************************(TechnicalSupport)*************************(RMASupport) Website:www.supermicro.nlAsia-PacificAddress:Super Micro Computer, Inc.3F, No. 150, Jian 1st Rd.Zhonghe Dist., New Taipei City 235Taiwan (R.O.C)Tel:+886-(2) 8226-3990Fax:+886-(2) 8226-3992PrefaceAsia-PacificEmail:*************************.tw(SalesInquiries)**********************.tw(TechnicalSupport)******************.tw(RMASupport)Website:Super TPM User's GuideTable of ContentsPreface (3)Chapter 1 Introduction ..............................................................................1-1 1.1 Overview of the Trusted Platform Module (TPM) ...........................................1-1 1.2 Supermicro TPM Features ..............................................................................1-2 1.3 Motherboards Supported for TPM ..................................................................1-3 1.4 Intel® TXT ........................................................................................................1-3 Chapter 2 Deploying and Using the TPM ...............................................2-1 2.1 Installing the TPM Onto the Motherboard .......................................................2-1 2.2 Enabling the TPM via the BIOS and Intel® Provision Utility ...........................2-2 2.3 An Important Note to the User ........................................................................2-9Chapter 1: IntroductionChapter 1Introduction1.1 Overview of the Trusted Platform Module (TPM)The Trusted Platform Module (TPM9670) is a special add-on module that may be installed onto Supermicro X11 dual and single processor motherboards that support CPU Socket 3674 only.Types of TPMsNote: TPM module must be provisioned in order to support Intel® TrustedExecution Technology (TXT). Please contact Supermicro Technical Sup-port to get more details about the Intel tool.The TPM-9670 series add-on modules use TCG (Trusted Computing Group) ver-sion 2.0 firmware.The following SKUs are available:• AOM-TPM-9670V, a vertical TPM module• AOM-TPM-9670H, a horizontal TPM moduleHorizontal vs. Vertical: Generally, whether you should use a TPM with a horizontal or vertical form factor depends on the physical space available. Horizontal TPMs are used in 1U chassis. Vertical TPMs are used in 2U or taller chassis, which are designed with a smaller footprint to occupy less space on the motherboard.Server vs. Client: To use the TXT function, each TPM has been provisioned as a server model or client model. Be sure to use the appropriate TPM for your needs.Both server TPM and client TPM are designed to support motherboards with Socket P (LGA3647) processors installed.Super TPM User's Manual1.2 Supermicro TPM Features1. TCG2.0 compliance2. SPI interface3. Microcontroller in 0.22/0.09-µm CMOS technology4. Compliant embedded software5. EEPROM for TCG firmware enhancements and for user data and key support6. Hardware accelerator for SHA-1 and SHA-256 hash algorithm7. True Random Number Generator (TRNG)8. Tick counter with tamper detection9. Protection against dictionary attack10. Infineon's TPM 2.0 is Common Criteria (CC) certified at Evaluation AssuranceLevel (EAL) 4 Moderate11. General-purpose I/O12. Intel® Trusted Execution Technology (TXT) support13. AMD® Secure Virtual Machine Architecture support14. Full personalization with Endorsement Key (EK) and EK certificate15. Power-saving sleep mode16. 3.3V power supply17. WHQL dual-mode 1.1b + 1.2 TPM Windows Kernel Mode DriverChapter 1: Introduction1.3 Motherboards Supported for TPMPlease refer to the Supermicro website (/) for a complete and most up-to-date list of the motherboards that can support the TPM. As a general rule, besides the X11 motherboards, the list includes most X9 motherboards, all X10 motherboards, and some AMD motherboards. These motherboards will come with a specially designated JTPM1 connector on every board, which will be listed in the respective motherboard's manual.1.4 Intel® TXTThe Intel Trusted Execution Technology (TXT) is a software tool that may be used in conjunction with the TPM to provide additional security for pre-launch firmware of clusters and clouds, including but not limited to the BIOS, IPMI, SAS firmware, and CMM firmware. It is optional, but the TPM is required for it to be provisioned.It will further enhance system security by protecting firmware against malicious attacks on vulnerable areas.It works by matching hypervisor measures with encryption keys upon system launch.If the hypervisor does not match the keys, the hypervisor will be prevented from starting up.To use the TXT, you need to enable TXT support after provisioning the TPM.Note: TXT is only supported on Intel platforms that support TPM use.How the TXT WorksThe Intel TXT, when enabled, follows a step-by-step process to ensure the security of pre-launch components.1. Measures the hypervisor launch upon system startup2. Checks for a match3. If matched: The TXT signals "trusted," and the launch is allowed to proceed.4. If mismatched: The TXT signals "untrusted," and the launch is blocked.Chapter 2: Deploying and Using the TPMChapter 2Deploying and Using the TPMFollow the instructions below to begin using the TPM.2.1 Installing the TPM Onto the MotherboardTo install the Trusted Platform Module onto your motherboard, follow the steps below.1. Find the 9-pin male JTPM1 connector on the motherboard. If you need helplocating this connector, consult your motherboard manual. If the board doesnot have this feature, then it does not support the TPM.2. Using the key pin as a reference, orient, and align your TPM with the connec-tor.key pin3. Carefully insert the TPM into the connector on the motherboard, making surenot to damage the pins.Note: The orientation of the TPM to be installed depends on whether ithas a horizontal or vertical form factor. The vertical TPM is intended to"stand" perpendicular to the motherboard, while the horizontal TPM liesflat (parallel) on the motherboard. See the below two images for the cor-rect orientation.Horizontal TPM Vertical TPMSuper TPM User's Manual2.2 Enabling the TPM via the BIOS and Intel® ProvisionUtilityThere are two components to the process of enabling the TPM. After you have installed the TPM onto the motherboard, you must first "verify" the TPM for the motherboard. This is done through the BIOS, which can also be used to enable TXT support. You then will need to "lock" the TPM in the firmware. This is done through the provision utility provided by Intel.A. Enabling the TPM in the BIOS1. Enter the BIOS setup screen. You may do this either from the IPMI remoteconsole or from the server directly using KVM. Reboot the system, and pressthe <Del> key as the system boots until you reach the BIOS screen.2. You will be presented with the BIOS Setup main screen. Using your arrowkeys, navigate to the "Advanced" tab. From there, navigate down and selectthe "CPU Configuration" option. Press <Enter>.3. You will then be taken to the CPU Configuration page. Using your arrow keys,navigate down to the "Intel Virtualization Technology" option, as shownbelow, and press <Enter>. If this item is not already enabled, select Enableand press <Enter>.Chapter 2: Deploying and Using the TPM4. Once you have enabled virtualization support, press your <Esc> key until youare back to the "Advanced" tab. Navigate down to the "Trusted Computing"option and press <Enter>.The Trusted Computing window will appear.Note: By default, "SHA-1 PCR Bank" and "SHA-256 PCR Bank” areEnabled.5. Disable "PH Randomization" and "TXT Support" only. Using the arrowkeys, select each option, press the <Enter> key to select Disabled, andpress the <Enter> key again.Super TPM User's Manual7. Use the arrow keys to select "Save Changes ". Press the <Enter > key.6. Press the <Esc > key to bring you back to the "Advanced " tab options. Usethe arrow keys to toggle to the "Save & Exit " tab.Chapter 2: Deploying and Using the TPMB. Provisioning Intel TXT (Server)Next, you will need to provision Intel TXT in the UEFI shell.Note: If the TPM part number is AOM-TPM-9670V-S or AOM-TPM-9670H-S, you do not need to get the Intel® Provisioning Tool. Please go aheadand enable the Intel TXT feature in the BIOS.1. Select "UEFI: Built-in EFI Shell" in the BIOS. The system will boot into theUnified Extensible Firmware Interface (UEFI) with a list of available USBdevices.2. Each USB device has its own code. Type the code for the USB device thatyou want to use into the command line at the bottom of the screen. and press the <Enter> key.Note: The device used for the purposes of this user guide had a codeof fs0. Replace this code with the code that corresponds to your device.3. In the command line at the bottom of the screen, follow these steps belowafter typing “FS0”.Super TPM User's Manual4. After the provisioning process has been completed, you will need to go backinto the BIOS and enable "TXT Support". To do this, type "exit" in the com-mand line at the bottom of the screen and press the <Enter> key.Chapter 2: Deploying and Using the TPMC. Enabling TXT SupportThe last step is enabling TXT Support in the BIOS and UEFI shell.1. Go back to the "Advanced" tab in the BIOS and enable Platform Hierarchy,Storage Hierarchy, Endorsement Hierarchy, PH Randomization, and TXTSupport.2. Go back to the "Save & Exit" tab and select "UEFI: Built-in EFI Shell" inthe BIOS. When the confirmation window appears, select <Yes>.Super TPM User's Manual3. After Enabling TXT Support in the BIOS, you will need to run TXT in theUEFI shell. In the Command line at the bottom of the page, type “get-sec64_v2.0.11.efi -l sen -a” and press the <Enter> key. TXT support is now enabled.4. To Exit from the TXT Environment, type “getsec64_v2.0.11.efi -l sexit” inthe command line at the bottom of the screen and press the <Enter> key.Chapter 2: Deploying and Using the TPM2.3 An Important Note to the UserThe graphics shown in this user's guide were based on the latest information available at the time of publishing of this guide. The TPM screens shown on your computer may or may not look exactly like the screen shown in this user's guide.For any further assistance, please refer to our website for details.(Disclaimer Continued)The products sold by Supermicro are not intended for and will not be used in life support systems, medi-cal equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro disclaims any and all li-ability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind。
Intel Notebook CPU Infomation
"Penryn" (Apple iMac specific, 45 nm)∙Die size: 107 mm²∙Steppings: C0, E0Model Number sSpec Number Frequency L2 Cache FSB Mult Voltage TDP Socket Release Date Part Number(s)Release Price (USD) Core 2 Duo E8135SLAQA (C0)2400 MHz6 MB1066 MT/s9x44 W Socket P April 2008FF80576E8135Core 2 Duo E8135SLG8W (C0)2667 MHz6 MB1066 MT/s10x44 W Socket P March 2009AW80576E8135 SLGED (E0)2667 MHz6 MB1066 MT/s10x35 W Socket P March 2009Core 2 Duo E8235SLAQB (C0)2800 MHz6 MB1066 MT/s10.5x44 W Socket P April 2008Core 2 Duo E8335SLAQC (C0)2667 MHz6 MB1066 MT/s10x44 W Socket P April 2008 SLGEB (E0)2933 MHz6 MB1066 MT/s11x35 W Socket P March 2009Core 2 Duo E8435SLAQD (C0)3067 MHz6 MB1066 MT/s11.5x55 W Socket P April 2008 SLGEA (E0)3067 MHz6 MB1066 MT/s11.5x44 W Socket P March 2009Penryn", "Penryn-3M" (medium-voltage, 45 nm)∙All models support: MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, Enhanced Intel SpeedStep Technology (EIST), Intel 64, XD bit (an NX bit implementation), iAMT2 (Intel Active Management), Intel VT (except the non-Mac P7350, P7450, and P7550)[18][19][20], TXT, IDA (Intel Dynamic Acceleration)∙Select Apple subsets of P7000 series processors support Intel VT.[21][22]∙Penryn and Penryn-3M processors support Dynamic Front Side Bus Throttling between 533MT/s and 1066MT/s.∙Die size: 107 mm² (Penryn), 82mm² (Penryn-3M)∙Package size: 35 mm × 35 mm∙Steppings: C0, E0 (Penryn) M0, R0 (Penryn-3M)Model Number sSpec Number Frequency L2CacheFSB MultVoltage TDP SocketReleaseDatePart Number(s)Release Price (USD ) Core 2 Duo P7350 SLB44 (C0) SLB53 (M0) 2000 MHz 3 MB 1066 MT/s 7.5x 1.00 - 1.250 V 25 W Socket P Mid 2008AW80576GH0413MAW80577SH0413M OEM Core 2 Duo P7370[23]SLG8X (R0) 2000 MHz 3 MB 1066 MT/s 7.5x 1.00V - 1.250V 25 W Socket P January2009 AW80577SH0413M OEMAW80577SH0413MLCore 2 Duo P7450 SLB45 (M0) SLGF7 (R0) SLB54 (C0)2133 MHz 3 MB 1066MT/s8x1.00V - 1.250V 25 W Socket PJanuary2009AW80577SH0463MAW80576GH0463M (C0)OEMCore 2 Duo P7550 SLGVT SLGF8 (R0) 2266 MHz 3 MB 1066MT/s 8.5x 1.00V - 1.250V 25 W Socket P June 2009 AW80577SH0513MAOEM Core 2 Duo P7570 SLGLW (R0) 2266 MHz 3 MB 1066MT/s8.5x ??25 W Socket P Q3 2009AW80577SH0513MLOEMCore 2 Duo P8400 SLB3R (M0)SLB3Q (M0) SLB3R (M0) SLB52 (M0)SLG8Z (M0) SLGCC (R0) SLGCQ (R0) SLGCF (R0) SLGCL (R0) SLCGC (R0)2266 MHz 3 MB 1066 MT/s 8.5x 1.00V - 1.250V 25 W Socket P June 13,2008[24]AW80577SH0513MAW80577SH0513MNBX80577P8400$209SL3BU (C0) SLB4M (M0) SLGE2 (R0)FCBGA6AV80576SH0513M (C0) AV80577SH0513MCore 2 Duo P8600 SLB3S (M0) SLGA4 (M0) SLGFD (R0)SLGDZ (R0) 2400 MHz 3 MB 1066MT/s9x1.00V - 1.250V 25 W Socket PJune 13,2008[25]AW80577SH0563MBX80577P8600$241SLB4N (M0) SL3BV (C0) SLGDZ (R0)FCBGA6AV80576SH0563M (C0)AV80577SH0563MCore 2 Duo P8700 SLGFE (R0) SLGFG (R0) 2533 MHz 3 MB 1066 MT/s 9.5x 1.00V - 1.250V 25 WSocket P FCBGA6 December 28, 2008 AW80577SH0613MGAV80577SH0613MG $241 Core 2 Duo P8800 SLGLR (R0) SLGLA (E0) 2667 MHz 3 MB 1066 MT/s 10x 1.00 - 1.25V 25 W 35 W Socket PFCBGA6Q2, 2009 AW80577SH0673MG AV80577SH0673MGBX80577P8800 $241Core 2 Duo P9500 SLB4E (C0)SLGE8 (E0) SL3BW (C0) 2533 MHz 6 MB 1066 MT/s 9.5x1.050V -1.162V25 WSocket P FCBGA6 July 14, 2008 AW80576SH0616MAV80576SH0616M $348Core 2 Duo P9600 SLGE6 (E0) 2667 MHz 6 MB 1066 MT/s 10x1.050V -1.212V25 W Socket P December 28, 2008AW80576SH0676MG$348 Core 2 Duo P9700 SLGQS (E0) 2800 MHz 6 MB 1066MT/s10.5x 1.012V-1.175V 28 W Socket P June 2009 AW80576SH0726MG$348"Penryn" (medium-voltage, 45 nm, Small Form Factor)∙All models support: MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, Enhanced Intel SpeedStep Technology (EIST), Intel 64, XD bit (an NX bit implementation), iAMT2 (Intel Active Management), Intel VT, TXT, IDA (Intel Dynamic Acceleration)∙Die size: 107 mm²∙Package size: 22 mm × 22 mm∙Steppings: C0, E0Model NumbersSpecNumberFrequencyL2CacheFSB Mult Voltage TDP SocketReleaseDatePart Number(s)Release Price(USD)Core 2 Duo SP9300 SLB63 (C0)SLGAF (E0)2267 MHz 6 MB1066MT/s8.5x1.050 -1.150 V25 WµFC-BGA956July 2008 AV80576SH0516M $284Core 2 Duo SP9400 SLB64 (C0)SLGHG (C0)SLGAA (E0)2400 MHz 6 MB1066MT/s9x1.050 -1.150 V25 WµFC-BGA956July 2008 AV80576SH0566M $284Core 2 Duo SP9600 SLB63 (C0)SLGAF (E0)2533 MHz 6 MB1066MT/s9.5x1.050 -1.150 V25 WµFC-BGA956Q1 2009AV80576SH0516MAV80576SH0616M。
SAMS70和SAME70微控制器家族概述说明书
SAMS70 and SAME70 Microcontroller FamiliesSummaryThe SAMS70 MCU familiy is based on the ARM ® Cortex ®-M7 core plus FloatingPoint Unit (FPU) extending Microchip's 32-bit microcontroller portfolio with maximum operating speeds of up to 300 MHz, 2 MB of Flash and up to 384 KB of multi-port SRAM, of which up to 256 KB can be assigned to tightly coupled memory (data and instructions) delivering a zero wait state at 300 MHz. The SAMS70 family is able to accelerate execution from on-chip Flash and Non-Volatile Memory (NVM) connectedto Quad-SPI and EBI with 16 KB of data and 16 KB of instruction cache memory.This unique memory architecture enables the SAMS70 family to be optimized for real-time deterministic code execution and low-latency peripheral data access. Additionally, the SAMS70 family includes an extensive peripheral set including high-speed USB host and device with high-speed PHY , up to eight UARTs, five SPI, three I 2C, I 2S™, SD/MMC interface, a CMOS camera interface, twelve 16-bit timers, eight 16-bits PWMs and analog interfaces. The SAME70 family includes similar features as the SAMS70family as well as a 10/100 Ethernet MAC and dual Bosch CAN-FD interfaces with advanced analog features making them ideal forconnectivity applications.Key Features• ARM Cortex-M7 core running at 300 MHz• FPU for high-precision computing and accelerated data processing• High-performance internal-memory architecture with user-configurable tightly coupled memories and system memory/16 KB I and 16 KB D cache • Dual Bosch CAN-FD controller• 10/100 Ethernet MAC with IEEE 1588 and KSZ8061 PHY • Quad-SPI with eXecute-In-Place• High-speed USB host and device with on-chip high-speed PHY• CMOS image sensor interface• AES hardware-encryption engines, TRNG and SHA-based memory integrity checker• Advanced analog front end based on dual 2 Msps, 12-bit ADCs, including 16-bit average, with up to 24 channels, offset error correction and gain control• Dual 2 Msps, 12-bit DAC and analog comparator • 64- to 144-pin package options• Extended industrial temperature range from −40°C to 105°CDevelopment ToolsSAMV71 Xplained Ultra Evaluation Kit (ATSAMV71-XULT)The SAM V71 Xplained Ultra evaluation kit is ideal for evaluating and prototyping with the SAMV71, SAM V70, SAM S70 and SAM E70 MCUs. Extension boards to the SAM V71 Xplained Ultra can be purchased individually. This kit is also compatible with Arduino Shields.SAME70 Xplained Evaluation Kit (ATSAME70-XPLD)The SAME70-Xplained Evaluation Kit is ideal for evaluating and prototyping with the Microchip SAMS70 and SAME70 MCUs. It provides connectivity for Eth-ernet, HS USB and SD Cards as well as2-XPRO extension headers. Extension boards for the SAME70Xplained can be purchased individually.The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2017, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 6/17DS60001427CPackage Options*QFN with wettable Flanks。
W78E58中文
W78E58B规格书8位微控制器目录:1.概述 (3)2.特性 (3)3.管脚配置 (4)4.管脚描述 (5)5.方块图 (7)6.功能描述 (8)6.1 RAM (8)6.2 定时器0，1，2 (8)6.3 时钟 (9)6.4 晶体振荡器 (9)6.5 外部时钟 (9)6.6 电源管理 (9)6.7 减少EMI辐射 (9)6.8 复位 (9)6.9 I/O口4 (11)6.10 INT2/INT3 (12)6.11 P4口基地址寄存器 (14)6.12 在线编程（ISP）模式 (15)6.13 在线编程控制寄存器（CHPCON） (17)6.14 F04KBOOT 模式（从LDROM启动） (18)7.保密位 (22)7.1 锁止位 (22)禁止 (22)7.2 MOVC7.3 加密 (22)8.电气特性 (23)8.1 绝对最大额定值 (23)8.2 DC特性 (23)出版日期: December 22, 20048.3 AC特性 (25)8.3.1时钟输入波形 (25)8.3.2程序读取周期 (26)8.3.3数据读取周期 (26)8.3.4数据写周期 (27)8.3.5端口访问周期 (27)9.时序波形图 (28)9.1 程序读取周期 (28)9.2 数据读周期 (28)9.3 数据写周期 (29)9.4 端口访问周期 (29)10.典型应用电路 (30)10.1 扩展的外部程序存储器和石英晶体 (30)10.2 扩展的外部程序存储器和振荡器 (31)11.封装尺寸 (32)11.1 DIP40 (32)11.2 44 管脚PLCC (33)11.3 44 管脚PQFP (34)12.应用指南 (35)12.1 ISP 软件编程示例： (35)13.文件版本描述 (42)1. 概述W78E58B是具有带ISP功能的Flash EPROM的低功耗8位微控制器；ISP功能的Flash EPROM可用于固件升级。
易 Wi-Fi 扩展器 RE580D 产品说明书
191001121910011262AC 1900RE580DCOPYRIGHT & TRADEMARKSSpecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright ©2015 TP-LINK TECHNOLOGIES CO., LTD.All rights reserved.FCC STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.●Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1)This device may not cause harmful interference.2)This device must accept any interference received, includinginterference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”CE Mark WarningThis is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.National RestrictionsThis device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitationCountry Restriction Reason/remarkBulgaria None General authorization required foroutdoor use and public serviceFrance Outdoor use limited to10 mW e.i.r.p. withinthe band 2454-2483.5MHz Military Radiolocation use. Refarming of the 2.4 GHz band has been ongoing in recent years to allow current relaxed regulation. Full implementation planned 2012Italy None If used outside of own premises,general authorization is required Luxembourg None General authorization required fornetwork and service supply(not forspectrum)Norway Implemented This subsection does not apply forthe geographical area within a radiusof 20 km from the centre of Ny-ÅlesundRussian Federation None Only for indoor applications Note: Please don’t use the product outdoors in France.5150-5250 MHzCountry Restriction Reason/remarkBulgaria Not implemented PlannedCroatia License requiredItaly General authorization required if used outside own premisesLuxembourg None General authorization required fornetwork and service supply (not forspectrum)Russian Federation No infoNote: Operations in the 5.15-5.25GHz band are restricted to indoor usage only.Canadian Compliance StatementThis device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:1)This device may not cause interference, and2)This device must accept any interference, including interference thatmay cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :1)l'appareil nedoit pas produire de brouillage, et2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectriquesubi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Industry Canada StatementComplies with the Canadian ICES-003 Class B specifications.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.CAN ICES-3 (B)/NMB-3(B)Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Korea Warning Statements당해무선설비는운용중전파혼신가능성이있음.NCC Notice & BSMI Notice注意！依據低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。
Jumper R8 (D16 mode) Compatible Receiver instructi
Introduction：Thanks for choosing Jumper R8 full duplex telemetry receiver.Please read the instruction manual carefully and follow the instructions below to set up the device before using it.Overview：Specifications：Dimension: 35.8*23.7*12.6mm (L x W x H)Weight: <10gNumber of Channels: 16Ch (1~16ch from SBUS channel, 1~8ch from PWM channel) Operating Voltage Range: 3.5V~8.4VOperating Current: 70mA@5VOperating Range: Full rangeCompatibility: FrSky X-series module & radios in D16 modeFeatures：Telemetry TX/RX port enabled.( for PIX telemetry)Binding Procedure：Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module .A transmitter internal or external RFmodule can be bound to multiple receivers (not to be used simultaneously).A receiver can only be bound to one RF module.Follow the steps below to finish the binding procedure.1.Put the transmitter/transmitter RF module into binding mode.For Jumper T16, Taranis X9D/X9D Plus/X9E and Taranis Q X7, turn on the radio, go to the MENU – MODEL SETUP – PAGE 2, choose Internal or External RF, and select BIND.2. Connect battery to the receiver while holding the F/S button on the receiver, the RED LED flashing indicates binding successfully.3. Reboot the receiver and go back to normal Mode of transmitter RF. Green LED constant on indicates linking normally. The receiver/transmitter module binding will not have to be repeated, unless one of the two is replaced.Note: After binding procedure is completed , power on the radio and the receiver and check if the receiver is really under control by linked transmitter.Range Check：A pre-flight range check should be done before each flying session. Reflections from nearby metal fences, concrete buildings or treescan cause loss of signal both during range check and during the flight. Under Range Check Mode, the RF power would be decreasedand Range distance to 1/30--1/10 that of Normal Model, about 30 meters.1. Place the model at least 60cm (two feet) above non-metal contaminated ground(e.g on a wooden bench). The receiver antennashould be in vertical position.2. For Jumper T16，Taranis X9D/X9D Plus/X9E and Taranis Q X7, turn on the radio and the receiver, go to : MODEL SETUP/Internal RF/Range.3. For transmitter RF module, please refer to its manual.Failsafe：Failsafe is a useful feature which is for a preset channel output position whenever control signal is lost for a period.Follow the steps to set Failsafe for channels necessary :Failsafe for receiver supporting D16 RF mode setting can be set via radio interface, which support no pulse, hold and customthree modes for each channel.For Jumper T16，Taranis X9D/X9D Plus/X9E and Taranis Q X7, turn on the radio, go to: MODEL SETUP/Internal RF/Failsafe.Note: Failsafe setting via transmitter for channel output position just for D16 RF mode, and Failsafe setting via transmitter has higher priority to setting via receiver. A reasonable Failsafe setting can decrease falling risk and damage.PIX telemetry:Much more operation and instruction please refer to radio manual.。
CA51F5 系列 MCU 中文用户手册说明书
Built - in 16 Bit PWM / Touch Key / 1T 8051 8K Flash MCUCA51F5系列MCU中文用户手册REV 2.2深圳市锦锐科技股份有限公司电话：*************传真：*************地址：中国广东省深圳市南山区沙河西路深圳湾科技生态园一区2栋B座5层目录1 概述 (5)2 基本特性 (5)3 芯片型号功能介绍 (7)4 系统框图 (8)5 引脚封装及其描述 (9)5.1封装定义 (9)5.2引脚描述 (11)6 中央处理器（CPU） (13)6.1CPU简介 (13)6.2寄存器描述 (13)7 存储器系统 (17)7.1 随机数据存储器（RAM） (17)7.2 特殊功能寄存器（SFR） (17)7.3 Flash存储器 (18)7.3.1 功能简介 (18)7.3.2 Flash存储器组织结构 (18)7.3.3 Flash寄存器描述 (19)7.3.4 Flash控制例程 (22)7.4外部RAM映射为程序空间 (24)8 中断系统 (25)8.1 功能简介 (25)8.2 中断逻辑 (25)8.3 中断向量表 (26)8.4 中断控制寄存器 (26)8.5 外部中断 (28)8.5.1外部中断介绍 (28)8.5.2外部中断寄存器 (28)8.5.3外部中断控制例程 (30)9 时钟系统 (32)9.1 时钟系统介绍 (32)9.1.1 时钟专用名称定义 (32)9.1.2 内置16MHz RC振荡器（IRCH） (32)9.1.3内置131 KHz RC振荡器（IRCL） (32)9.2 时钟控制寄存器描述 (33)9.3 系统时钟 (35)9.3.1 系统时钟结构图 (35)9.3.2 系统时钟控制寄存器描述 (35)9.3.3 系统时钟控制方法及例程 (36)10 供电和复位系统 (37)10.1 供电系统 (37)10.1.1 LDO功能简介 (37)10.1.2 LDO控制寄存器 (38)11 功耗管理 (42)11.1 IDLE模式 (42)11.2 STOP模式 (42)11.3 低速运行模式 (43)11.4 低功耗相关寄存器描述 (43)11.5 低功耗模式控制例程 (44)12 通用定时器（定时器0,定时器1,定时器2） (47)12.1 定时器0 (47)12.1.1 定时器0介绍 (47)12.1.2 定时器0寄存器描述 (48)12.2 定时器1 (50)12.2.1 定时器1介绍 (50)12.2.2 定时器1寄存器描述 (51)12.3 定时器2 (52)12.3.1 功能简介 (52)12.3.2 定时器2寄存器描述 (53)13 看门狗定时器（WDT） (56)13.1 看门狗定时器(WDT)功能简介 (56)13.2 看门狗定时器(WDT)寄存器描述 (56)13.3 看门狗定时器控制例程 (58)14 TMC定时器 (60)14.1 TMC功能简介 (60)14.2 TMC寄存器描述 (60)14.3 TMC控制例程 (61)15 通用输入输出口（GPIO）及复用定义 (62)15.1 功能简介 (62)15.2 引脚寄存器描述 (64)15.3 引脚控制例程 (69)16 通用串行接口（UART0） (70)16.1 功能简介 (70)16.2寄存器描述 (74)17 I²C接口 (76)17.1 功能简介 (76)17.2 I2C主要特点 (76)17.3 I2C功能描述 (76)17.4 I2C通信引脚的映射 (78)17.5 寄存器描述 (78)17.6 I2C控制例程 (81)18 PWM (88)18.1 PWM功能简介 (88)18.2 PWM功能描述 (88)18.3 PWM寄存器描述 (90)18.4 PWM功能控制例程 (99)19 数模转换器（DAK） (102)19.2寄存器描述 (102)19.4 DAK控制例程 (103)20电容式触摸按键（Touch Key） (104)20.1 功能简介 (104)20.2 主要特性 (104)20.3 结构图 (105)20.4 功能描述 (105)20.4.2 手动模式和自动模式 (105)20.4.3 触摸时钟预分频 (105)20.4.4 低功耗模式 (106)20.4.5触摸按键共用LED驱动 (106)20.5 寄存器描述 (107)20.6 触摸控制例程 (120)21低电压检测（LVD） (121)21.1 功能简介 (121)21.2 功能描述 (121)21.3 寄存器描述 (122)21.4 LVD控制例程 (123)22程序下载和仿真 (125)22.1 程序下载 (125)22.2 在线仿真 (125)23电气特性 (126)23.1 极限参数 (126)23.2 直流电气特性 (126)23.3交流电气特性 (128)24封装类型 (129)25附录 (133)附录1 指令集速查表 (133)1 概述CA51F551系列芯片是基于1T 8051内核的8位微控制器，通常情况下，运行速度比传统的8051芯片快10倍，性能更加优越。
dd-wrt固件支持的路由器型号
Pronghorn Metro SBC
-
?
Xscale IXP425@533
64
16
-
depends on card
4
1
?
1 LAN, 1 WAN
yes
17- 30 & 36- 60
CF socket, hw watchdog, temp. and volt. sensor
mini PCI
Serial port
JTAG port
Eth. port count
PoE
Volt. Input [V/A]
Special Features Notes
min required DD-WRT version
Notes for Running DD-WRT
Coyote
-
?
Xscale IXP425@533
v.24 sp2 - build 12646 - 13/08/09
MI424WR
MI424WR
C
LNQ802MAG
Xscale IXP425@533
32
8
depends on card
Atheros b/g
1
1
1
4 LAN 1 WAN
-
5V / 3A
OEM'd to Verizon, FIOS port will not work
clone ofdir-300
V24 RC5
[1]
AP431W
?
RRK-AP431W
Atheros AR2313A@180
16
4
Atheros
b/g
EB-PowerLite L520U L530U L630U L630SU L635SU L730U
EB-PowerLiteL520U/L530U/L630U/L630SU/L635SU/L730U/L735UFirmware Release Note08/10/2023Mar. 19, 2021Ver 1.01 First release of mass-productions.Jul. 2, 2021Ver 1.02 Specification change- The IC for Mic input has been changed, old and new IC areautomatically identified.- Countermeasure against Wireless LAN vulnerability. (Fragattacks)Bug fix- IP address may not be assigned by DHCP in wireless network environment.- The projector may shut down when opening the Reset menu or performing reset.Oct. 14, 2021Ver 1.03 Specification change- Improvement for Factory's adjustment. (There is no change about projector's behavior and function.)Bug fix- Bug fix of V1.02 that volume settings may not be reflected if the audiosource level is low.- IP address may not be assigned by DHCP in wireless network environment.- With the following settings, the audio of the AV amplifier does not muteeven if A/V mute is performed.•Release A/V Mute: A/V Mute•HDMI Link: On•HDMI Link: Audio Out Device: AV SystemApr. 20, 20221.04 Specification change- Added "FW Ver." and "Sequence Num." to "Error Info page" of ASmenu.- Crestron Connected V2: Freeze command support.- Countermeasure against Wireless LAN vulnerability.- Countermeasure against WPA supplicant vulnerability.Bug fix- iProjection is disconnected when you press "Projection My Screen"button of iProjection app during source search.Jun. 7, 20231.06 *V1.05 is the missing number.[Feature improvement]1. The specifications are improved to comply with the Policy for a new cyber law in UK "Product Security and Telecommunications Infrastructure Act 2022".[Usability improvement]1. "EPSON logo" shown during start-up process has changed. (EXCEED YOUR VISION is deleted)* This change applies only to newly manufactured products with V1.06.Products updated to V1.06 from older version: keep EPSON logo (no change)2. Compliant with Chinese national standard GB18030-2022 Level 2.[Bug fixes]Fixed a bug as following:1. The Crestron page of the Web Control where "Issued to" and "Issued by" were displayed in reverse order.2. Sometimes, abnormal standby or Watch Dog Reset happens due to overflow of the CEC system que.3. Unable to set Crestron Connected to "ON" from web control for the first time only.4. Crestron Connected character restriction was not correct.- Detail: cannot set the character including space string.Jan. 3, 2022v1.07Specification change- Add the tag [Windows/macOS] to the step2 in the connection guide of iProjection.- Add the function to load the memory saved by Geometry Correction with the Num key + numberkey on the remote controller.- Crestron Connected V2: Freeze command supportBug fix- Repeated Power ON/OFF under the following conditions may disconnect the network connectionduring standby.- Use ELPAP11- Standby mode: Communication ON- Priority Gateway: Wireless LANMar. 3, 2022v1.08Bug fix- In the following situation, iProjection cannot search the projector.- Standby mode: Communication ON- Many PC that installed iProjection exist in the same network.- When playing H.264/H.265 codec video by PC-free, the video freezes for several hundred msec atthe beginning.Apr. 21, 2022v1.09Specification change- [21:9] has been added to the Screen Type of OSD menu.- With the addition of screen type [21:9], [2560x1080/60Hz] and [1920x810/60Hz] have beenadded to EDID menu.Bug fix- In Crestron Connected V2, you cannot connect to VC-4 with a user name and password.Dec. 8, 2022v1.10Bug fix- When the video signal is input and Dynamic Contrast setting is set to "High Speed" or "Normal",the projected image may turn blue at startup.Dec. 14,2022v1.11Specification change- Vulnerability support: Updated OpenSSL version (1.1.1n)- Support new LSM Assy* (automatic detection for new and old LSM assy)Bug fix- There is a case where it responds to a wrong value with SNMP.* The mass production switchover of the new LSM Assy is scheduled for March 2023. May 30, 2023v1.13 *V1.12 is the missing number.[Specification change]- "EPSON logo" has changed. (EXCEED YOUR VISION is deleted)* This change applies only to newly manufactured products with V1.13.Products updated to V1.13 from older version: keep EPSON logo (no change)- Compliant with Chinese national standard GB18030-2022. (Font added)- Compliant with the Policy for new cyber laws in UK "Product Security and TelecommunicationsInfrastructure Act 2022".Please refer to TI(VP22-GNE-0118) for details.- Change the timing of time settings in initial settings.Less than V1.13: Complete all initial settings.V1.13 or later: Set the time in initial settings.[Bug fixes]Fixed a bug as the following:- The playlist in USB mass-storage is not displayed with "contents playback" and "direct power on"are set ON.- Access the URL related "contents playback" no longer into 403 error with non-setting the webcontrol password.- Sometimes the projector is not stable due to inputting the data immediately after PWR ON[CR]inputwith ESCVP command by connecting to RS232C.Jun. 20, 2023v1.14[Bug fixes]Fixed a bug following:1. Some characters in the language setting screen were displayed larger when the language settingwas set to Chinese (Simplified).[Usability improvement]1. Changed Chinese (Simplified) to bold for better visibility.。
USR-N668 说明书
USR-N668软件设计手册文件版本：V1.0.11.功能特点⏹2路以太网口，10/100Mbps，支持AUTO-MDIX网线交叉直连自动切换⏹8路串口。
每路串口支持RS232/RS485/RS422⏹支持DHCP/StaticIP两种方式获取IP地址⏹工作模式可选择TCP Server、TCP Client、UDP Client、UDP Server、Httpd Client、SSL Client⏹每路均支持双Socket，做Client时可将数据发向两个不同的服务器⏹TCP Server模式下，连接Client的数量最多16个⏹自定义心跳包&注册包。
保证连接真实可靠，杜绝死连接⏹支持ModbusTCP转ModbusRTU⏹支持超时重启（无数据重启）与超时重连，时间可自定义⏹MAC地址可修改，出厂烧写全球唯一MAC⏹支持DNS域名解析，DNS服务器地址可设⏹支持远程监控与远程固件升级⏹支持花生壳DDNS功能⏹支持网络时间同步+内建RTC实时时钟，确保时间准确，用户可通过指令获取时间⏹支持计划任务，用户可自定义少量设备相关的指令⏹通过内置网页升级固件，升级固件更加方便⏹支持网页、设置软件设置参数。
提供AT指令设置协议，供客户集成到自己的软件中⏹支持虚拟串口，配套有人自主开发的USR-VCOM软件⏹同时支持软件和硬件恢复出厂设置⏹可以跨越网关，交换机，路由器运行⏹可以工作在局域网，也可访问外网目录USR-N668软件设计手册 (1)1.功能特点 (2)目录 (3)2.产品概述 (6)2.1.产品简介 (6)3.产品功能 (6)3.1.默认参数 (6)3.2.基础功能 (7)3.2.1.IP地址/子网掩码/网关 (7)3.2.2.DNS (8)3.2.3.VPN-PPTP (8)3.2.4.GRE隧道 (9)3.2.5.网络诊断 (11)3.3.Socket功能 (11)3.3.1.TCP Client工作方式 (11)3.3.2.TCP Server工作方式 (13)3.3.3.UDP Client工作方式 (15)3.3.4.UDP Server工作方式 (16)3.3.5.Httpd Client工作方式 (17)3.3.6.SSL Client工作方式 (19)3.3.7.虚拟串口软件VCOM (20)3.4.串口功能 (21)3.4.1.串口成帧机制 (21)3.4.2.类RFC2217 (22)3.5.特色功能 (24)3.5.1.指示灯说明 (24)3.5.2.SocketB功能 (24)3.5.3.心跳包功能 (24)3.5.4.注册包 (26)3.5.5.ModbusTCP (27)3.5.6.无数据重连时间 (28)3.5.7.动态DDNS (29)3.5.8.远程管理与远程监控 (29)3.5.9.计划任务 (30)4.设置协议 (31)4.1.AT指令概述 (31)4.1.1.AT指令集 (33)AT指令详解： (35)4.1.2.AT+E (35)4.1.3.AT+Z (35)4.1.4.AT+VER (35)4.1.5.AT+RELD (35)4.1.7.AT+RSTIM (36)4.1.8.AT+MID (36)4.1.9.AT+H (36)4.1.10.AT+MAC (37)4.1.11.AT+WEBU (37)4.1.12.AT+WEBPORT (37)4.1.13.AT+PLANG (37)4.1.14.AT+SEARCH (38)4.1.15.AT+WANN (38)4.1.16.AT+DNS (38)4.1.17.AT+UPTIME (39)4.1.18.AT+SOCKMN (39)4.1.19.AT+SOCKLKMN (39)4.1.20.AT+SOCKPORTMN (40)4.1.21.AT+UARTN (40)4.1.22.AT+UARTTLN (40)4.1.23.AT+RFCENN (41)4.1.24.AT+REGENN (41)4.1.25.AT+REGTCPN (42)4.1.26.AT+REGCLOUDN (42)4.1.27.AT+REGUSERN (42)4.1.28.AT+HEARTENN (43)4.1.29.AT+HEARTTPN (43)4.1.30.AT+HEARTTMN (43)4.1.31.AT+HEARTDTN（本功能不推荐使用，请使用HEARTUSERN） (44)4.1.32.AT+HEARTUSERN (44)4.1.33.AT+HTPTPN (44)4.1.34.AT+HTPURLN (45)4.1.35.AT+HTPHEADN (45)4.1.36.AT+HTPCHDN (45)4.1.37.AT+NTPTM (45)4.1.38.AT+NTPTML (46)4.1.39.AT+NTPUTC (46)4.1.40.AT+NTPZONE (46)4.1.41.AT+NTPSVR (46)4.1.42.AT+NTPRF (47)4.1.43.AT+PDTIME (47)4.1.44.AT+HW_VER (47)4.1.45.AT+TRAFFIC (47)4.1.46.AT+MONITOR (48)4.1.47.AT+UPDATE (48)4.1.48.AT+DDNS (49)4.1.49.AT+DDNSEN (49)4.1.51.AT+PPTPDTL (50)4.1.52.AT+GRE (50)5.联系方式 (52)6.免责声明 (52)7.更新历史 (53)2.产品概述2.1.产品简介USR-N668是有人物联网技术有限公司推出的8串口服务器，这是一款实现RJ45网口与RS232/RS485/ RS422接口之间直接的数据透明传输的设备。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
was performed on the EBF build, EAServer compatibility (for those customers
Sybase Engineering
--------------------------------------------------------------------------------
General Information and Technical Notes
---------------------------------------
One Sybase Drive
Dublin, CA 94568
1-800-8-SYBASE (North America)
Web:
Dear Customer:
Enclosed please find:
EBF 16685
for the following platform:
then have a release that has undergone more intensive QA testing.
In the interim, please backup your installation, as you normally would do
prior to making any updates to your install. Likewise, Sybase recommends
------------------------------------------------------------------------------
IMPORTANT:
Sybase recommends that customers exercise caution when using these EBFs.
Product Compatabilities:
-----------------------
Application Servers
PowerBuilder 11.2 has been tested with EAServer 5.5 patched with EBFs 13993
and 14146, and EAServer 6.1.
provided on an Emergency basis. If you decide to use this EBF it will be
necessary for you to retest your entire application.
By applying these files, you agree to upgrade and apply the next Generally
InfoMaker
PowerBuilder Desktop
PowerBuilder Professional
We recommend that you install this EBF as soon as possible.
In response to customer requests, PowerBuilder Emergency Bug Fix (EBF)
OR
You know that a fix you require is in a given EBF, because it is included in
one of the HTML fixed lists provided on the site, or a member of the Sybase
Support staff has informed you that it has been fixed in the EBF.
Be sure to read the readme file included in each zip file for important up-to-
date information specific to that EBF. These readme files also include
this EBF.
This documentation includes these sections:
* General Information and Technical Notes
* Platform Specific Details
* Loading Instructions
Sybase Rollup EBF 16685
=======================
--------------------------------------------------------------------------------
March 12, 2009
Sybase, Inc.
Available public release.
Platform Specific Details
-------------------------
This section contains platform specific details of this EBF.
PB:
The minimum requirement for applying this EBF is the PB 11.2 (Build 8407).
Windows x86 32-bit
This EBF is part of this release:
PowerBuilder 11.2 (8739)
This EBF contains updates for the following product(s):
PowerBuilder Enterprise
testing your application(s) with the patch prior to using it in production.
Sincerely,
Sybase Technical Support
IMPORTANT NOTES:
---------------
This EBF build has received QA automation and manual testing. It is being
subjected to the Sybase QA team's customary standard suite of tests. It is a
requirement that you upgrade to the next official PowerBuilder release on
This section contains general and technical information about this EBF.
The files included in this EBF are 32-bit from PowerBuilder 11.2 EBF Build
-----------------------------------------------------------------------------
Sybase may remove an EBF from the Sybase downloads site if a severe regression
is identified/reported that could potentially adversely affect the majority of
the PowerBuilder customer base.
We appreciate your patience while we resolve problems in the product and your
releases are now generally available to all PowerBuilder customers, and
include a setup program (for PB Enterprise, Professional, and Desktop
versions, as well as InfoMaker) to make the EBF installation process easier.
who use both PowerBuilder and EAServer), as well as additional software
requirements, installation instructions, deployment and supportability
details, etc.
SQL Anywhere
PowerBuilder 11.2 has been tested with SQL Anywhere 10.0.1 and the SQL
Anywhere 10.0.1 Runtime Edition.
PowerDesigner
PowerBuilder 11.2 has been tested with PowerDesigner 12.5.
8ቤተ መጻሕፍቲ ባይዱ39
Dear Sybase Customer,
Please note that you are being provided with an EBF release of the Sybase
software you requested. In addition to the fixes from the previous scheduled