CEI41003

COMITATO ELETTROTECNICOITALIANOLa norma fornisce inoltre le rego-le per i documenti di ubicazione e installazione utilizzati principal-mente per le attività installative. Criteri per l’identificazione di pro-dotti, componenti e oggetti uti-lizzati in un impiantoLa CEI EN 61346-1 (CEI 3-43)“Sistemi industriali, installazioni e apparecchi e prodotti industriali - Principi di strutturazione e desi-gnazioni di riferimento.Parte 1:Regole di base” è la norma che stabilisce i principi generali per la descrizione della struttura delle informazioni relative ai sistemi e dei sistemi stessi.In base a questi principi, sono indicate le regole e le direttive per la formulazione di designazioni di riferimento univoche relative aglioggetti in un qualsiasi designazione di riferimento identifica gli oggetti al fine di sta-C •E •I •N •F •O •R •M •AMensile di informazioneAnno VII/n. 6viale Monza, 259 20126 Milano Tel.(02) 25773.1Fax (02) 25773222 - Vendite Fax (02) 25773210 - Direzione E-mail: ceinforma@ceiuni.it http://www.ceiuni.itAutorizzazione del Tribunale di Milano N°334 del 4/5/1991Direttore responsabile Emilio CamagniSpedizione in abbonamento postale art. 2, comma 20/c, legge 662/96 -Filiale di MilanoLitostampa Natali s.r.l.CEINFORMA viene spedito ad Autorità, Ministeri, Enti pubblici e privati, Associazioni di categoria,Albi professionali nonché, a richie-sta, a tutti gli operatori del settore.Settembre 1997Il CEI segnala...Segni graficiSono uscite tre norme del Comitato Tecnico 3 “Segni gra-fici” che coprono diversi settori dell’elettrotecnica:Tecnica dell’informazione La CEI EN 61286 (CEI 3-41) si applica al campo dell’ Information Technology , definendo un insie-me di caratteri grafici codificati e normalizzati da usare nella pre-parazione di documenti, in parti-colare disegni e schemi, e nella progettazione di simboli grafici. I caratteri grafici specificati posso-no essere validamente utilizzati anche per il trasferimento delle informazioni.Documenti utilizzati in elettrotecnica La norma CEI EN 61082-4 (CEI 3-42) riguarda la preparazione di documenti utilizzati in elettro-tecnica per la parte relativa alla documentazione di posa e di installazione.Tratta differenti sistemi e oggetti quali disegni di posa o installa-zione per siti, edifici e apparec-chiature, disegni o schemi di installazione per siti o edifici e disegni relativi al posizionamen-to sui o nei componenti.IN QUESTO NUMERO:IL CEI SEGNALA...CEI EN 61286CEI EN 61082-4CEI EN 61346-1CEI EN 41003CEI EN 50016CHE FINE HA FATTO LA CARTOLINA?COSTITUZIONE DEL CT 102/103CLIMATIZZAZIONE DEGLI AMBIENTI ELEZIONE DI DIRIGENTI IEC RECEPIMENTO DIRETTIVA B.T.PROROGATA LA SCADENZA DELLA 46/90INOLTRE:NUOVE NORME CEINORME CEI REINGEGNERIZZATE PROGETTI CEI IN INCHIESTA PUBBLICA DOCUMENTI CENELEC IN INCHIESTAPROGETTI DI NORMA ESTERI PROGETTI ETS IN INCHIESTA NUOVE NORME ETSIDisegno di base con aggiunta dell’impianto di illuminazione (Norma CEI EN 61082-4)Costruzioni elettriche per atmo-sfere potenzialmente esplosive È uscita anche la terza edizione della CEI 31-2 (CEI EN 50016) che con-sidera le costruzioni elettriche per atmosfere potenzialmente esplosi-ve realizzate con il modo di prote-zione a sovrapressione interna “p”.La norma deve essere utilizzata con-giuntamente alla norma CEI EN 50014 “Regole generali” (CEI 31-8).La norma contiene le regole per la costruzione della custodia e dei suoi componenti associati, comprese le canalizzazioni di alimentazione e di scarico del gas di protezione, se sono previsti, e le regole relative alle dispo-sizioni ed ai dispositivi di sicurezza necessari per il modo di protezione a sovrapressione interna “p”.Specifica infine le regole per le custodie a sovrapressione interna con o senza sorgente interna di emissione di sostanze infiammabili e contiene le prescrizioni per le custodie a sovrapressione interna comportanti una sorgente di emis-sione illimitata di gas o di vapori infiammabili soltanto quanto la sor-gente di emissione illimitata provie-ne dalla superficie di un liquido.bilire una correlazione delle infor-mazioni relative a un oggetto fra diversi tipi di documenti e i pro-dotti che implementano il sistema. I principi enunciati sono generali e sono intesi come applicabili a tutti i settori tecnici. Possono essere uti-lizzati per sistemi basati su tecno-logie differenti o per sistemi che combinano diverse tecnologie.Macchine d’ufficio e per l’elabo-razione dei datiÈ stata pubblicata la terza edizione della CEI 74-3 (CEI EN 41003)“Requisiti particolari di sicurezza per apparecchiature da collegare a reti di telecomunicazioni”. È una norma che si applica alle apparecchiature progettate e desti-nate ad essere collegate ad una ter-minazione di rete di telecomunica-zione. Comprende i requisiti di sicurezza ed i criteri di conformitàin ordine alla:• protezione per gli utilizzatori dell’apparecchiatura di teleco-municazione dai pericoli insiti nell’apparecchiatura;• protezione per il personale di ser-vizio che lavora sulla rete di tele-comunicazione e degli altri uti-lizzatori della rete di telecomuni-cazione contro le eventuali conseguenze del collegamento dell’apparecchiatura;•protezione per l’utilizzatore dell’apparecchio dalle tensioni sulla rete di norma segue ed estende i prin-cipi della Guida IEC 105 e concilia le specifiche di sicurezza stabilite dalla IEC per l’uso di prodotti elet-trici con la considerevole esperien-za sulla sicurezza dei gestori delle reti di telecomunicazione riguardoal funzionamento delle loro reti.La 74-3 indica di applicare alcuni requisiti particolari quando l’appa-recchiatura collegata alle reti viene usata negli ambienti dell’abbona-to. Questi requisiti assicurano la non propagazione alla rete di even-tuali pericoli provenienti dall’appa-recchiatura, che nessun contatto con le tensioni di rete possa avve-nire attraverso l’apparecchiatura stessa e che vengano impediti con-tatti involontari o contatti di ampie superfici di pelle con le prese di col-legamento cui deve essere dispo-nibile l’accesso.I livelli di prova usati per le appa-recchiature tengono conto della possibilità che si verifichino sovra-tensioni sulla rete di telecomunica-zione. È stata dedicata particolare attenzione alle parti di apparec-chiatura previste per essere tenute in mano o toccate durante l’uso normale, come ad esempio gli apparecchi telefonici.La norma si applica senza tenere conto della proprietà o responsa-bilità per l’installazione o manu-tenzione dell’apparecchiatura, e senza tenere conto della sorgente d’alimentazione.1 2 34 27 6a2bc C u s t od i a con com-pensazione delle perdi-te: macchi-na elettrica rotante con un ventila-tore esterno di raffredda-mento.Norma CEI EN 50016CENELEC: INCHIESTA PUBBLICA SU DOCUMENTI IN LINGUA ORIGINALE Sono richiesti commenti ai seguenti documenti entro il:22 luglio 1997PrEN 45510-1 Guide for procurement of power station equipment -Part 1: Common rules1 settembre 1997prEN 60519-6 Safety in electroheat installations -- Part 6: Specifica-tions for safety in industrial microwave heating equipment10 settembre 1997PrEN 45510-5-1 Guide for procurement of power station equipment - Part 5-1: Steam turbinesPrEN 45510-5-2 Guide for procurement of power station equipment - Part 5-2: Gas turbinesPrEN 45510-5-3 Guide for procurement of power station equipment - Part 5-3: Wind turbines15 settembre 1997PrEN 60317-0-1/AX Specifications for particular types of winding wires -- Part 0: General requirements -- Section 1: Enamelled round copper wirePrEN 60317-0-2/AX Specifications for particular types of winding wires -- Part 0: General requirements -- Section 2: Enamelled rectangular copper wire PrEN 60317-0-3/AX Specifications for particular types of winding wires -- Part 0: General requirements -- Section 3: Enamelled round aluminium wirePrEN 60317-0-4/AY Specifications for particular types of winding wires -- Part 0: General requirements -- Section 4: Glass-fibre wound bare or enamelled rectangular copper wirePrEN 60317-0-5/AX Specifications for particular types of winding wires -- Part 0: General requirements -- Section 5: Glass-fibre brai-ded, bare or enamelled rectangular copper wirePrEN 60317-0-5/AY Specifications for particular types of winding wires -- Part 0: General requirements -- Section 5: Glass-fibre brai-ded, bare or enamelled rectangular copper wirePrEN 60317-39/AX Specifications for particular types of winding wires -- Part 39: Glass-fibre braided, polyester or polyesterimide var-nish-treated, bare or enamelled rectangular copper wire, temperatu-re index 180PrEN 60317-40/AX Specifications for particular types of winding wires -- Part 40: Glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200prEN 61558-2-2 Safety of power transformers, power supply units and similar -- Part 2-2: Particular requirements for control transformers prEN 61558-2-5 Safety of power transformers, power supply units and similar -- Part 2-5: Particular requirements for shaver transfor-mers and shaver supply units24 settembre 1997PrEN 45510-5-4 Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage, pumps and pump-turbines 30 settembre 1997prEN 60081 Double-capped fluorescent lamps - Performance specifi-cationsprEN 60286-1 Packaging of components for automatic handling --Part 1: Tape packaging of components with axial leads on conti-nuous tapesprEN 60286-2 Packaging of components for automatic handling --Part 2: Tape packaging of components with unidirectional leads on continuous tapesprEN 60286-3/A1 Packaging of components for automatic handling -- Part 3: Packaging of leadless components on continuous tapes prEN 60335-2-35 Safety of household and similar electrical applian-ces -- Part 2: Particular requirements for instantaneous water heaters PrEN 60730-2-5/A2 Automatic electrical controls for household and similar use -- Part 2: Particular requirements for automatic electrical burner control systemsprEN 61305-2 Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance --Part 2: FM radio tunersprEN 61830 Microwave ferrite components - Measuring methods for major properties 7 ottobre 1997PrEN 45510-6-1 Guide for procurement of power station equipment- Part 6-1: Turbine auxiliaries - DeaeratorsPrEN 45510-6-2 Guide for procurement of power station equipment- Part 6-2: Turbine auxiliaries - Feedwater heatersPrEN 45510-6-3 Guide for procurement of power station equipment- Part 6-3: Turbine auxiliaries - Condenser plantPrEN 45510-6-7 Guide for procurement of power station equipment- Part 6-7: Turbine auxiliaries - Moisture separator reheaters15 ottobre 1997prEN 50206-1 Railway applications - Rolling stock - Pantographs:Characteristics and tests -- Part 1: Pantographs for main line vehiclesprEN 60286-4 Packaging of components for automatic handling --Part 4: Stick magazines for electronic components encapsulated inpackages of form E and GPrEN 60335-2-9/A1 Safety of household and similar electricalappliances -- Part 2: Particular requirements for toasters, grills, roa-sters and similar appliancesprEN 60404-2 Magnetic materials -- Part 2: Methods of measure-ment of the magnetic properties of electrical steel sheet and strip bymeans of an Epstein frameprEN 60534-2-3 Industrial-process control valves -- Part 2: Flowcapacity -- Section 3: Test proceduresprEN 60674-1 Specification for plastic films for electrical purposes --Part 1: Definitions and general requirementsprEN 60679-1 Quartz crystal controlled oscillators of assessed quality-- Part 1: Generic specificationprEN 60838-1 Miscellaneous lampholders -- Part 1: General require-ments and testsPrEN 60870-5-103 Telecontrol equipment and systems -- Part 5:Transmission protocols -- Section 103: Companion standard for theinformative interface of protection equipmentprEN 61000-4-16 Electromagnetic compatibility (EMC) -- Part 4-16:Testing and measurement techniques - Test for immunity to con-ducted, common mode disturbances in the frequency range 0 Hz to150 kHzprEN 61800-1 Adjustable speed electrical power drive systems -- Part1: Rating specifications for low voltage d.c. power drive systems31 ottobre 1997PrEN 50124-1 Railway applications - Insulation coordination -- Part1: Basic requirements - Clearances and creepage distances for allelectrical and electronic equipmentprEN 50250 Conversion adapters for industrial usePrEN 60172/A1 Test procedure for the determination of the tempe-rature index of enamelled winding wiresPrEN 60264-4-1/A1 Packaging of winding wires -- Part 4: Methods oftest -- Section 1: Delivery spools made from thermoplastic materialprEN 60312 Vacuum cleaners for household use - Methods of mea-suring the performanceprEN 60317-27 Specifications for particular types of winding wires --Part 27: Paper tape covered rectangular copper wirePrEN 60335-2-11/A1 Safety of household and similar electricalappliances -- Part 2: Particular requirements for tumbler dryersPrEN 60335-2-2/A1 Safety of household and similar electricalappliances -- Part 2: Particular requirements for vacuum cleaners andwater suction cleaning appliancesPrEN 60335-2-7/A1 Safety of household and similar electricalappliances -- Part 2: Particular requirements for washing machinesprEN 60335-2-85 Safety of household and similar electrical applian-ces -- Part 2: Particular requirements for fabric steamersprEN 60646 Test methods for crucible induction furnacesprEN 60674-2 Specification for plastic films for electrical purposes --Part 2: Methods of testprEN 60674-3-2 Specification for plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Require-ments for balanced biaxially oriented polyethylene terephthalate(PET) films used for electrical insulationprEN 60674-3-3 Specification for plastic films for electrical purposes -- Part 3: Specifiations for individual materials -- Sheet 3: Require-ments for polycarbonate (PC) films used for electrical insulationprEN 60674-3-7 Specification for plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 7: Require-ments for fluoroethylene-propylene (FEP) films used for electricalinsulationprEN 60679-4 Quartz crystal controlled oscillators of assessed quality-- Part 4: Sectional Specification - Capability approvalprEN 60684-3-136 Flexible insulating sleeving -- Part 3: Specificationfor individual types of sleeving -- Sheet 136: Extruded fluorosiliconesleeving - General purposeprEN 60875-1 Fibre optic branching devices -- Part 1: Generic speci-ficationprEN 60875-1-1 Fibre optic branching devices -- Part 1-1: Blankdetail specificationprEN 60947-1/A1 Low-voltage switchgear and controlgear -- Part 1:General rulesprEN 61032 Test probes to verify protection by enclosuresPrEN 61161/A1 Ultrasonic power measurement in liquids in the fre-quency range 0,5 MHz to 25 MHzprEN 61675-1 Radionuclide imaging devices - Characteristics andtest conditions -- Part 1: Positron emission tomographsprEN 61675-2 Radionuclide imaging devices - Characteristics andtest conditions -- Part 2: Single photon emission computer tomo-graphsprEN 61847 Ultrasonics - Surgical systems - Measurement and decla-ration of the basic output characteristicsprEN 60286-3 Packaging of components for automatic handling --Part 3: Packaging of leadless components on continuous tapesprHD 384.5.537 S1/A1 Electrical installations of buildings -- Part 5:Selection and erection of electrical equipment -- Chapter 53: Switch-gear and controlgear - Section 537: Devices for isolation and switching15 novembre 1997prEN 61012 Filters for the measurement of audible sound in the pre-sence of ultrasoundprEN 61333 Marking on U and E ferrite cores15 gennaio 1998prEN 50254 High efficiency communication subsystem for smalldata packagesprHD 53.8 S5 Rotating electrical machines -- Part 8: Terminalmarkings and direction of rotation of rotating machines24 gennaio 1998PrEN 45544-4 Workplace atmospheres - Electrical apparatus for thedirect detection and concentration measurement of toxic gases andvapours -- Part 4: Guide for selection, installation, use and mainte-nance15 febbraio 1998prHD 22.4 S3/A1 Rubber insulated cables of rated voltages up toand including 450/750 V -- Part 4: Cords and flexible cablesprHD 22.7 S2/A1 Rubber insulated cables of rated voltages up toand including 450/750 V -- Part 7: Cables with increased heat resi-stance for internal wiring for a conductor temperature of 110 ¯CprHD 22.8 S2/A1 Rubber insulated cables of rated voltages up toand including 450/750 V -- Part 8: Polychloroprene or equivalentsynthetic elastomer sheathed cable for decorative chainsprHD 22.9 S2/A1 Rubber insulated cables of rated voltages up toand including 450/750 V -- Part 9: Single core non-sheathed cablesfor fixed wiring having low emission of smoke and corrosive gasesPROGETTI DI NORMA ESTERI NOTIFI-CATI SECONDO LA DIRETTIVA CEE83/189 (LEGGE ITALIANA N. 317/86)AUSTRIA:Scad. : 31/10/97CENELEC/BT (AT/Revision) 007: Lightning protec-tion systemsSVEZIA:Scad. : 15/9/97CENELEC/BT (SE/Notification) 14: Safety of hou-sehold and similar electrical appliances - Part 2: Par-ticular requirements for room heaters for sanitaryaccomodations, nursery schools and after-schoolscentres.INCHIESTA PUBBLICA SU PROGETTI DI NORME ETS Sono sottoposti ad inchiesta pubblica i seguenti progetti di norme ETS e I-ETS elaborati dai Comi-tati Tecnici dell’ETSI (European Telecommunica-tions Standard Institute). Osservazioni o commenti devono pervenire al CEI (o all’UNI) entro il:27 ottobre 1997EN 301 060-1 ed. 1.1.1 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call applications enhancement at the "b" service entry point for Virtual Priva-te Network (VPN) applications; Part 1: Protocol specificationEN 301 061-1 ed. 1.1.1 Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functional protocol for the support of supplementary services for Virtual Private Network (VPN) applications; Part 1: Protocol specificationEN 301 062-1 ed. 1.1.1 Integrated Services Digital Network (ISDN); Signalling System No.7; NNI extensions to support VPN applications EN 301 069-1 ed. 1.1.1 Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP); Application Transport Mechanism (APM) Part 1: Protocol specificationEN 301 080 ed. 1.1.1 Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Frequency Division Multiple Access (FDMA) point to multipoint DRRS in the band 3 GHz to 11 GHzEN 301 082 ed. 1.1.1 Network Aspects (NA); Integrated Services Digital Network (ISDN) Outgoing Call Barring-Fixed (OCB-F); Service descrip-tionEN 301 084 ed. 1.1.1 Network Aspects (NA); Integrated Services Digital Network (ISDN); Outgoing Call Barring-User Controlled (OCB-UC) sup-plementary service; Service descriptionEN 301 238 ed. 1.1.1 Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services with roaming mobility (service type D, mobility class 2)EN 301 239 ed. 1.1.1 Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Isochronous data bearer services for closed user groups (service type D, mobility class 1)EN 301 240 ed. 1.1.1 Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Point-to-Point Protocol (PPP) interworking for internet access and general multi-protocol datagram transportEN 301 241-1 ed. 1.1.1 Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementa-tion Conformance Statement (ICS); Part 1: Portable radio Termination (PT)EN 301 241-2 ed. 1.1.1 Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for intermediate system configuration; Profile Implementa-tion Conformance Statement (ICS); Part 2: Fixed radio Termination (FT) EN 301 242 ed. 1.1.1 Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM integration based on dual-mode terminalsETS 300 417-6-1 ed. 1 Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment; Part 6-1: Synchro-nization layer functions28 ottobre 1997EN 300 481 ed. 1.2.1 Terminal Equipment (TE); Integrated Services Digi-tal Network (ISDN) B-Channel Aggregation Unit (CAU); Procedures and terminal requirementsETS 300 504 ed. 4 Digital cellular telecommunications system (Phase 2); Types of Mobile Stations (MS) (GSM 02.06 version 4.5.1)ETS 300 505 ed. 3 Digital cellular telecommunications system (Phase 2); Mobile Station (MS) features (GSM 02.07 version 4.8.1)ETS 300 506 ed. 2 Digital cellular telecommunications system (Phase 2); Security aspects (GSM 02.09 version 4.4.0)ETS 300 574 ed. 6 Digital cellular telecommunications system (Phase 2); Multiplexing and multiple access on the radio path (GSM 05.02 version 4.9.0)ETS 300 575 ed. 4 Digital cellular telecommunications system (Phase 2); Channel coding (GSM 05.03 version 4.5.0)ETS 300 578 ed. 10 Digital cellular telecommunications system (Phase 2); Radio subsystem link control (GSM 05.08 version 4.19.0)ETS 300 904 ed. 2 Digital cellular telecommunications system (Phase 2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.02 version 5.3.1)ETS 300 905 ed. 3 Digital cellular telecommunications system (Phase 2+); Teleservices supported by a GSM Public Land Mobile Network (PLMN); (GSM 02.03 version 5.3.1) ETS 300 906 ed. 2 Digital cellular telecommunications system (Phase2+); Mobile Stations (MS) features (GSM 02.07 version 5.3.1)ETS 300 908 ed. 3 Digital cellular telecommunications system (Phase2+); Multiplexing and multiple access on the radio path (GSM 05.02 ver-sion 5.4.0)ETS 300 911 ed. 3 Digital cellular telecommunications system (Phase2+); Radio subsystem link control (GSM 05.08 version 5.4.0)ETS 300 920 ed. 2 Digital cellular telecommunications system (Phase2+); Security aspects (GSM 02.09 version 5.1.0)ETS 300 924 ed. 2 Digital cellular telecommunications system (Phase2+); enhanced Multi-Level Precedence and Pre-emption service (eMLPP)- Stage 1 (GSM 02.67 version 5.0.4)29 ottobre 1997EN 300 197 ed. 1.2.1 Transmission and Multiplexing (TM); Digital RadioRelay Systems (DRRS); Parameters for DRRS for the transmission of digitalsignals and analogue video signals operating at 38 GHzEN 300 198 ed. 1.2.1 Transmission and Multiplexing (TM); Digital RadioRelay Systems (DRRS); Parameters for DRRS for the transmission of digitalsignals and analogue video signals operating at 23 GHzEN 300 236 ed. 1.2.1 Terminal Equipment (TE); Syntax-based videotexprotocol; Terminal conformance testingEN 300 386-2 ed. 1.1.3 Equipment Engineering (EE); Telecommunica-tion network equipment; Electro-Magnetic Compatibility (EMC) require-ments; Part 2: Product family standardEN 301 192 ed. 1.1.1 Digital Video Broadcasting (DVB); DVB specifica-tion for data broadcastingEN 301 234 ed. 1.1.1 Digital Audio Broadcasting (DAB); MultimediaObject Transfer (MOT) protocolEN 301 251 ed. 4.1.1 Digital cellular telecommunications system (Phase2); Fault management of the Base Station System (BSS) (GSM 12.11 ver-sion 4.1.1)ETS 300 175-5 ed. 3 Digital Enhanced Cordless Telecommunications(DECT); Common Interface (CI); Part 5: Network (NWK) layerETS 300 374-3 ed. 2 Intelligent Network (IN); Intelligent Network Capa-bility Set 1 (CS1); Core Intelligent Network Application Protocol (INAP);Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification forService Switching Function (SSF) and Specialized Resource Function(SRF)NUOVE NORME EUROPEEDI TELECOMUNICAZIONIPUBBLICATE DALL'ETSIETS 300 019-1-3/A1 ed. 1Equipment Engineering (EE); Environmentalconditions and environmental tests for telecommunications equipment;Part 1-3: Classification of environmental conditions Stationary use atweatherprotected locationsETS 300 019-1-4/A1 ed. 1 Equipment Engineering (EE); Environmentalconditions and environmental tests for telecommunications equipment;Part 1-4: Classification of environmental conditions Stationary use at non-weatherprotected locationsETS 300 019-2-3/A1 ed. 1 Equipment Engineering (EE); Environmentalconditions and environmental tests for telecommunications equipment;Part 2-3: Specification of environmental tests Stationary use at weather-protected locationsETS 300 019-2-4/A1 ed. 1 Equipment Engineering (EE); Environmentalconditions and environmental tests for telecommunications equipment;Part 2-4: Specification of environmental tests Stationary use at non-weatherprotected locationsETS 300 052-4 ed. 1 Integrated Services Digital Network (ISDN); MultipleSubscriber Number (MSN) supplementary service; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite(ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the userETS 300 052-5 ed. 1 Integrated Services Digital Network (ISDN); MultipleSubscriber Number (MSN) supplementary service; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 5: Test Suite Structure andTest Purposes (TSS&TP) specification for the networkETS 300 052-6 ed. 1 Integrated Services Digital Network (ISDN); MultipleSubscriber Number (MSN) supplementary service; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite(ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the networkETS 300 058-4 ed. 1 Integrated Services Digital Network (ISDN); CallWaiting (CW) supplementary service; Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) and partialProtocol Implementation eXtra Information for Testing (PIXIT) proformaspecification for the userETS 300 058-5 ed. 1 Integrated Services Digital Network (ISDN); CallWaiting (CW) supplementary service; Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes(TSS&TP) specification for the networkETS 300 058-6 ed. 1 Integrated Services Digital Network (ISDN); CallWaiting (CW) supplementary service; Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partialProtocol Implementation eXtra Information for Testing (PIXIT) proformaspecification for the networkETS 300 061-4 ed. 1 Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) andpartial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the userETS 300 061-6 ed. 1 Integrated Services Digital Network (ISDN);Subaddressing (SUB) supplementary service; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) andpartial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the networkETS 300 064-4 ed. 1 Integrated Services Digital Network (ISDN); DirectDialling In (DDI) supplementary service; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS) andpartial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the userETS 300 064-5 ed. 1 Integrated Services Digital Network (ISDN); DirectDialling In (DDI) supplementary service; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 5: Test Suite Structure and TestPurposes (TSS&TP) specification for the networkETS 300 064-6 ed. 1 Integrated Services Digital Network (ISDN); DirectDialling In (DDI) supplementary service; Digital Subscriber SignallingSystem No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) andpartial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the networkETS 300 092-4 ed. 1 Integrated Services Digital Network (ISDN); CallingLine Identification Presentation (CLIP) supplementary service; DigitalSubscriber Signalling System No. one (DSS1) protocol; Part 4: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the userETS 300 092-5 ed. 1 Integrated Services Digital Network (ISDN); CallingLine Identification Presentation (CLIP) supplementary service; DigitalSubscriber Signalling System No. one (DSS1) protocol; Part 5: Test SuiteStructure and Test Purposes (TSS&TP) specification for the networkETS 300 092-6 ed. 1 Integrated Services Digital Network (ISDN); CallingLine Identification Presentation (CLIP); supplementary service; DigitalSubscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract TestSuite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the networkETS 300 093-4 ed. 1 Integrated Services Digital Network (ISDN); CallingLine Identification Restriction (CLIR) supplementary service; DigitalSubscriber Signalling System No. one (DSS1) protocol; Part 4: AbstractTest Suite (ATS) and partial Protocol Implementation eXtra Informationfor Testing (PIXIT) proforma specification for the userETS 300 093-6 ed. 1 Integrated Services Digital Network (ISDN); CallingLine Identification Restriction (CLIR); supplementary service; DigitalSubscriber Signalling System No. one (DSS1) protocol; Part 6: AbstractTest Suite (ATS) and partial Protocol Implementation eXtra Informationfor Testing (PIXIT) proforma specification for the networkETS 300 097-4 ed. 1 Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary servi-ce; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 4:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the userETS 300 097-5 ed. 1 Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary servi-ce; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5:Test Suite Structure and Test Purposes (TSS&TP) specification for thenetworkETS 300 097-6 ed. 1 Integrated Services Digital Network (ISDN);Connected Line Identification Presentation (COLP) supplementary servi-ce; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6:Abstract Test Suite (ATS) and partial Protocol Implementation eXtraInformation for Testing (PIXIT) proforma specification for the networkETS 300 098-4 ed. 1 Integrated Services Digital Network (ISDN); ConnectedLine Identification Restriction (COLR) supplementary service; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 4: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the userETS 300 098-6 ed. 1 Integrated Services Digital Network (ISDN); ConnectedLine Identification Restriction (COLR) supplementary service; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS)and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for the networkETS 300 138-1 ed. 2 Integrated Services Digital Network (ISDN); ClosedUser Group (CUG) supplementary service; Digital Subscriber Signalling。