SG6859ATZ,SG6859ATZ,SG6859ATZ, 规格书,Datasheet 资料
SG6858元件中文资料翻译
低成本，绿色模式反激变换器PWM控制器SG6858特征:绿色模式PWM支持“蓝色天使”的标准低启动电流(10µA)低工作电流(2.5mA)前沿消隐恒定输出功率限制通用输入内建同步斜坡补偿电流模式操作Cycle-by-cycle电流限制在电压分离 (UVLO)、过压自锁频率可编程PWMVDD过电压保护（自动重启）Gate output voltage clamped at 17V低成本所需的外部元件数少封装SOT-26和DIP-8应用:普通开关电源和反激式电源转换器，例如：为蜂巢式电话、无绳电话电池充电器、PDAs、数码相机和电动工具电源适配器的喷墨打印机，视频游戏附加电绳。
游戏机和便携式音频播放器开架式SMPS为TV/DVD待机和辅助用品，家电，消费类电子产品可代替线性稳压器和RCC SMPS电脑5V备用电源说明这种高度集成的DWM控制器提供了多种特别强化设计，以满足低功耗SMPS.降低待机功耗，专有绿色模式功能提供关断时间调制线性降低开关在轻载条件下的频率.这绿色模式功能能够电源供应，以满足即使最严格的节能要求.使用了BiCMOS制造工艺能够减少启动电流和工作电流到10µA和2.5mA.为进一步提高节能，大启动电阻.内置同步斜率补偿保证了电流的稳定性峰值模式控制.专有的内部补偿规定在一个恒定的输出功率限制输入通用AC范围(90V AC到264V AC). 脉冲电流限制确保安全运行，以保护其免受外部功率MOSFET由供应过电压事件破坏，SG6858输出驱动器被钳位控制器可以在17V. SG6858用于提高性能和降低生产成本的电源线，可替代和RCC-mode电源适配器.它可用在8-pinDIP和6-pin SOT-26包典型应用引脚说明:使用说明SG6858器件是一款集成了众多有用设计的低功耗开关式电源控制器.下面主要说明SG6858系列的特点。
启动电流启动电流仅为10µA,它允许启动具有高电阻和低功率负载情况下启动电源控制器.即1.5MΩ, 0.25W,启动电阻和10µF/25V V DD滤波电容器适用于具有广泛AC-to-DC电源适配器输入范围(100V AC到240V AC).工作电流工作电流已经降低到2.5mA.低工作电流具有更高的效率并滤波的要求绿色模式操作专有的绿色模式功能，在轻负载条件提供关断时间调制线性降低开关频率.导通是有限的，以提供灰暗的灯光，更强的保护，防止其他不正常条件.用电压反馈环路的反馈电流，是作为参考.一旦反馈电流超过了阈值电流，开关频率开始下降.这个绿色模式功能下大幅降低轻载和零负载条件下的功耗.电源使用SG6858能满足最严格的待机功耗规定。
MM5ZxxxST1G Serie Zener Voltage Regulators 500 mW
MM5ZxxxST1G Series, SZMM5ZxxxST1G Series Zener Voltage Regulators 500 mW SOD−523 Surface MountThis series of Zener diodes is packaged in a SOD−523 surface mount package. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards. Specification Features•Standard Zener Breakdown V oltage Range −2.4 V to 18 V •Steady State Power Rating of 500 mW•Small Body Outline Dimensions:0.047″ x 0.032″ (1.20 mm x 0.80 mm)•Low Body Height: 0.028″ (0.7 mm)•ESD Rating of Class 3 (> 16 kV) per Human Body Model •Tight Tolerance V Z•SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable•These Devices are Pb−Free and are RoHS Compliant*Mechanical CharacteristicsCASE:V oid-free, transfer-molded, thermosetting plasticEpoxy Meets UL 94, V−0LEAD FINISH: 100% Matte Sn (Tin)MOUNTING POSITION:AnyQUALIFIED MAX REFLOW TEMPERATURE: 260°CDevice Meets MSL 1 RequirementsMAXIMUM RATINGSRating Symbol Max UnitTotal Device Dissipation FR−4 Board, (Note 1) @ T A = 25°CDerate above 25°C P D5004.0mWmW/°CThermal Resistance from Junction−to−Ambient (Note 1)R q JA250°C/WJunction and Storage Temperature Range T J, T stg−65 to+150°CStresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.1.FR−4 printed circuit board, single−sided copper, mounting pad 1 cm2.*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.Device Package Shipping†ORDERING INFORMATIONCathode AnodeSee specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet.DEVICE MARKING INFORMATIONSOD−523CASE 502STYLE 1MARKING DIAGRAMXX= Specific Device CodeM Date Code*G= Pb−Free Package(Note: Microdot may be in either location)*Date Code orientation may vary dependingupon manufacturing location.MM5ZxxxST1G SOD−523(Pb−Free)3,000 /Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D.SOD−523(Pb−Free)SZMM5ZxxxST1G3,000 /Tape & ReelSOD−523(Pb−Free)SZMM5ZxxxST5G8,000 /Tape & ReelELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted,V F = 0.9 V Max. @ I F = 10 mA for all types) Symbol Parameter V Z Reverse Zener Voltage @ I ZTI ZT Reverse CurrentZZT Maximum Zener Impedance @ I ZTI ZK Reverse CurrentZ ZK Maximum Zener Impedance @ I ZKI R Reverse Leakage Current @ V RV R Reverse VoltageI F Forward CurrentV F Forward Voltage @ I FQ V Z Maximum Temperature Coefficient of V Z C Max. Capacitance @V R = 0 and f = 1 MHzV Figure 1. Zener Voltage RegulatorELECTRICAL CHARACTERISTICS (V F = 0.9 Max @ I F = 10 mA for all types)Device*DeviceMarkingTestCurrentIzt mAZener VoltageVZZ ZK I Z= 1.0mA WMaxZ ZTI Z = IZT@ 10%Mod WMaxMaxIR @ VRd VZ/dt (mV/k)@ I ZT1 = 5 mA C pF Max @V R = 0f = 1 MHzMin Max m A V Min MaxMM5Z2V4ST1G T2 5.0 2.43 2.631000100120 1.0−3.50450MM5Z2V7ST1G T3 5.0 2.67 2.911000100100 1.0−3.50450MM5Z3V3ST1G T5 5.0 3.32 3.53100095 5.0 1.0−3.50450MM5Z3V6ST1G T6 5.0 3.60 3.85100090 5.0 1.0−3.50450MM5Z3V9ST1G T7 5.0 3.89 4.16100090 3.0 1.0−3.5−2.5450MM5Z4V3ST1G T8 5.0 4.17 4.43100090 3.0 1.0−3.50450MM5Z4V7ST1G/T5G T9 5.0 4.55 4.7580080 3.0 2.0−3.50.2260MM5Z5V1ST1G TA 5.0 4.98 5.250060 2.0 2.0−2.7 1.2225MM5Z5V6ST1G TC 5.0 5.49 5.7320040 1.0 2.0−2.0 2.5200MM5Z6V2ST1G TE 5.0 6.06 6.3310010 3.0 4.00.4 3.7185MM5Z6V8ST1G TF 5.0 6.65 6.9316015 2.0 4.0 1.2 4.5155MM5Z7V5ST1G TG 5.07.287.616015 1.0 5.0 2.5 5.3140MM5Z8V2ST1G TH 5.08.028.36160150.7 5.0 3.2 6.2135MM5Z9V1ST1G TK 5.08.859.23160150.5 6.0 3.87.0130MM5Z12VST1G TN 5.011.7412.2480250.18.0 6.010130MM5Z16VST1G TU 5.015.8516.5180400.0511.210.414105MM5Z18VST1G TW 5.017.5618.3580450.0512.612.416100 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.*Include SZ-prefix devices where applicable.TYPICAL CHARACTERISTICSTEMPERATURE (°C)25010040200P O W E R D I S S I P A T I O N (%)50751001251508060Figure 2. Steady State Power DeratingPACKAGE DIMENSIONSSOD −523CASE 502ISSUE ENOTES:1.DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.2.CONTROLLING DIMENSION: MILLIMETERS.3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PRO-TRUSIONS, OR GATE BURRS.DIM MIN NOM MAX MILLIMETERS D 1.10 1.20 1.30E 0.700.800.90A 0.500.600.70b 0.250.300.35c 0.070.140.20L 0.30 REF H 1.50 1.60 1.70*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*E RECOMMENDEDSIDE VIEW2XBOTTOM VIEWL2L2X2XL20.150.200.25STYLE 1:PIN 1.CATHODE (POLARITY BAND)2.ANODEON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。
H685 系列路由器规格说明书
H685系列路由器规格说明书产品概述H685系列路由器是伊林思科技有限公司基于无线网络需求，采用最新硬件系统平台，使用Linux软件系统引用最新技术研发出来的一款全新的，性能更为优异的物联网无线通信路由器产品。
采用工业级设计标准，它主要应用于行业用户的数据传输业务。
该产品采用高性能的32位嵌入式处理器,内嵌完备的TCP/IP协议栈,同时提供RS串口和10/100M以太网接口。
集成IO端子座，提供串口或者GPIO接口。
串口分别提供RS-232、RS-485、TTL电平接口的透明传输模式，支持的VPN 通信功能，采用IPSec/PPTP/L2TP/GRE VPN技术，企业级VPN隧道技术和防火墙技术，保证高安全性行业的数据安全，支持自动在线检测，实时动态刷新网络状态，保持链路畅通，产品以性能稳定、体积小、易于安装嵌入、抵抗环境能力强等优点，深受用户欢迎。
支持WEB/Telnet/Console多种配置方式，其中用户面对的是WEB图形化管理配制界面，管理方便简单。
该产品已广泛应用于物联网产业链中的M2M 行业，如智能电网、智能交通、智能家居、金融、移动POS 终端、供应链自动化、工业自动化、智能建筑、消防、公共安全、环境保护、气象、数字化医疗、遥感勘测、军事、空间探索、农业、林业、水务、煤矿、石化等领域。
行业应用金融：银行储蓄点机房监控，移动性证券交易和信息查询通信：电信机房动力环境监控，通信维护人员线路资料查询交通：GPRS/SMS/GPS 机动车辆监控调度系统；银行运钞车，邮政运输车监控调度。
公安：公安、110、交警车辆监控调度，公安移动性数据（身份证、犯罪档案等）查询，交警移动通信数据（车辆、司机档案等）查询。
热力：热力系统实时监控和维护电力：电力系统城市中电网实时监控和自动补偿，远程自动抄表公司：移动办公及管理，其他外勤人员移动性数据查询工业：工业遥感，遥测，遥控信息回报气象：气象数据采集与传输水利：水文监测生活：煤气调压站实时数据采集自动控制，自来水，污水管道，闸门、泵站与水厂实时监控维护电子商务：支持B2B、B2C的电子商务和电子支付、股票交易等。
OmniSwitch 6850E产品彩页
272970
OS6850E-24X
270735
OS6850E-48
253153
OS6850E-48X
242611
OS6850E-U24X
290159
* 最大耗电量。不包括接入到 PoE 端口的设备耗电量。 ** 在满传输负载下
● 湿度（运行和存储）：5% 至 95% 非冷凝 ● 在 -5℃至 +55℃、5% 至 90% 相对湿度（RH）环境下，对每
播交换，DHCP 侦听 /82 选项，ITU-T
Y.1731，IEEE 802.1ag
阿尔卡特朗讯 OmniSwitch 6850E 交换机型号 OmniSwitch 6850E 系列为客户提供多种千兆固定配置交换机选择，包括多达 4 条 10GigE 的上行线路，PoE 和电源选项，可满 足大部分需求。所有型号均为 1U 高，提供 2 个 10GBase-CX4 端口，可用于堆叠或替换为 2 端口 10 Gigabit SFP+ 模块。
OS6850E-U24X OS6-XNI-U2
特性
优势
多样特性和型号提供 ：
OmniSwitch 6850 系列拥有各种的接口和型
- 千兆和万兆接口
号，可满足任何客户配置需求，提供卓越的
- IEEE 802.3af 和 802.3at 兼容的 PoE 投资保护和灵活性，同时简化部署、运营和
- 可选的 10GigE 模块，提供 2 个 10GigE 维护
描述
尺寸
OS6850E-BP-D
模块化的 120W 48-V DC 电源。为非 PoE 设备提供系 16×17.5×4.4cm
统电源
(6.3×6.9×1.73 in)
CR6850中文版技术设计指导书
9、CRM 工作模式：
在轻载或空载时，CR6850C 进入 CRM 工作模式，工作频率降低。频率的变化由取自电压反馈环的反馈电 压控制，当反馈电压低于内部门限电压时，振荡器频率线性减小到最小绿色工作频率，约 22KHz 左右 （RI=100KΩ） 。在此振荡频率工作时，MOSFET 的开关损耗和磁芯、电感、吸收电路等各部分的损耗均减小， 从而减小了总损耗。在正常工作或重载时，PWM 频率增大到最大工作频率，约 67kHz 左右（RI=100KΩ） ，工 作频率不受绿色工作模式的影响。
管脚信息： 管脚信息：
典型应用电路图: 典型应用电路图:
CR6850C 应用指导书
一、芯片工作原理
1.功能概述：
CR6853 是用于 36W 以内离线式开关电源 IC，其高集成度，低功耗的电流模 PWM 控制芯片，该芯片适用 于离线式 AC-DC 反激拓扑的小功率电源模块。芯片可以通过外接电阻改变工作频率；在轻载和无负载情况 下自动进入 PFM 和 CRM，这样可以有效减小电源模块的待机功耗，达到绿色节能的目的。CR6850C 具有很低 的启动电流，因此可以采用一个 2 兆欧姆的启动电阻。为了提高系统的稳定性，防止次谐波振荡， CR6850C 内置了同步斜坡补偿电路；而动态峰值限制电路减小了在宽电压输入(90V~264V)时最大输出功率的变化； 内置的前沿消隐电路可以消除开关管每次开启产生的干扰。CR6850C 内置了多种保护功能：过压保护 、逐 周期峰值电流限制、欠压锁定（可以用它实现短路和过流保护）以及输出驱动的高电平钳位在 16.8V 以下。 而驱动输出采用的图腾柱和软驱动有效降低了开关噪声。 CR6850C 提供 SOT23-6L， SOT-8 和 DIP-8 无铅封装。 由于 CR6850C 高度集成，使用外围元件较少。采用 CR6850C 可以简化反激式隔离 AC-DC 开关电源设计， 从而使设计者轻松的获得可靠的系统。
网络模块685接警机说明
网络模块685接警机一、概述目前IP网络接警是大势所趋，基本主流的报警器厂家都有自己的有线网络模块或gprs无线网络模块。
更有甚者，还出现一种DTMF(CID\4+2)的通用型的网络模块或GPRS模块，这样就大大加快了报警设备网络化的进程。
考虑到目前一些联网报警中心软件是很多年前的产品，用户使用较为习惯，不想或暂时不想更换的，我们据此研发出一款“转换软件”，把各种不同的网络模块、gprs无线模块转换成685串口输出，输出到这些用户的老软件。
二、常用网络模块端口序号模块名称端口号1LX网络模块8090理想2HT网络模块6000宏泰3HT网络模块26002宏泰4HT GPRS模块6001宏泰5HT GPRS模块26003宏泰6KS-MGPRS网络模块9021科立信7KS-Z503A网络转换模块50000科立信8KB-AV28网络摄像机模块9020科立信9KB-1288网络模块9022科立信10FOCUS网络模块7974美安11IP2300网络模块5000德尚安12NAL2300网络模块4001海康\迈特安13IPM网络模块3000Honeywell14ZLA网络模块2011正林安15思科瑞网络模块6501思科瑞16飞腾网络模块7200飞腾17ALA网络模块2332艾礼安18AS-9000网络模块9000顺安居19DA2300、2500网络模块8060东昂20LX终端8090理想21好士佳平安钟4050好士佳22B426-CN/B4207700(UDP)博世上述端口未注明的都是TCP端口。
上述端口号是我们总结的各厂家的缺省端口号，如有出入，请用户自行设定。
三、软件安装说明首先找到上述安装文件。
运行如下：四、685接警机使用说明可看到windows桌面上的快捷方式，点击运行设置686串口及波特率开机自动运行表示windows启动登录后，本程序可自动运行。
输出来电显示表示用685协议可输出网络模块的IP地址。
CR6855 电源IC规格书
满足能源之星EPS 2.0版VI级能效标准
应用领域：
电池充电器 数码产品适配器
AC-DC电源适配器 PC、TV辅助电源 开放式电源
CR6855 电源管理 IC 深圳市振华凌云科技有限公司
一、芯片工作原理
1.功能概述：
CR6855是用于40W以内离线式开关电源IC，该IC具有优化的图腾驱动电路以及电流模式PWM控制器。PWM 控制器包含65KHz固定的频率振荡发生器以及各种保护。由振荡电路产生的频率抖动，可以改善EMI特性。 为了获得良好的效率和待机功耗，CR6855在重载或中等负载时，工作在PWM模式，频率为65KHz。当负载 逐渐减小时，振荡器的工作频率逐渐降低，最后稳定在22KHz左右。在空载和轻载时，电路采用间歇开关 模式，有效的降低了待机功耗，达到绿色节能的目的。CR6855具有很低的启动电流，若采用整流桥前启动， 可以使待机功耗降至100mW以内，满足能源之星EPS 2.0版VI级能效标准。为了提高系统的稳定性，防止 次谐波振荡，CR6855内置了同步斜坡补偿电路、内置恒定功率补偿电路,减小了在宽电压输入(85V~264V) 时最大输出功率的变化、内置的前沿消隐电路可以屏蔽开关管每次开启产生的干扰。CR6855内置了多种保 护功能：VDD 欠压保护(UVLO)、过压保护(OVP)及VDD电压钳位功能、过载保护（OLP）、外置可调过温保护 (OTP)、通过RT引脚实现可编程OVP功能，各种保护解除后均可自动恢复工作，以及输出驱动的高电平被嵌 位于12.5V以下。而驱动输出采用的图腾柱和软驱动,有效降低了开关噪声。 由于CR6855高度集成，使用外围元件较少。采用CR6855可简化反激式隔离AC-DC开关电源设计，从而使设 计者轻松的获得可靠的系统。
二、应用指导
SD6855 6 LED驱动原边控制开关电源说明书
杭州士兰微电子股份有限公司
Http: //
版本号：0.2 2010.11.01 共7页 第7页
IPK ；
ISP 为次级线圈的峰值电流，IPK 为原级线圈的峰值电流，n 为原次级线圈的匝比。 因此，在峰值电流恒定的条件下，只需要保持 TOFF1＝TOFF2＋TON 即可实现输出的恒流。
杭州士兰微电子股份有限公司
Http: //
版本号：0.2 2010.11Fra bibliotek01 共7页 第4页
版本号：0.2 2010.11.01 共7页 第2页
SD6855/6 说明书
极限参数（除非特殊说明， Tamb=25°C）
参
数
供电电压
内部电源电压
FB输入电压
其他输入电压
输入电流
工作结温
工作温度
贮存温度
ESD（人体模式）
符号 VCC VREF5V VFB VIN
IIN TJ Tamb TSTG ESD
关断阈值电压
内部供电电源
反馈部分
使能开启电压
过压保护电压
环路开路保护电压
动态特性部分
前沿消隐时间
过压保护恢复时间
限流部分
峰值电流检测阈值
过温保护部分
过热检测
过热迟滞
符号
测试条件
IST IOP VST VSP VREF5V
VCC =14V
VEN VOVP VBLANK
TLEB TOVP
VPK
Tsd Tsdhys
Http: //
版本号：0.2 2010.11.01 共7页 第3页
SD6855/6 说明书
功能描述
SD6855/6是离线式高端开关电源控制器。通过检测变压器原级线圈的导通时间TON、副边线圈放电的时 间TOFF1和衰减振荡的时间TOFF2，来实现输出恒流。
685使用说明书
685使⽤说明书ADEMCO 685 数字通讯接收机安装使⽤⼿册⽬录：1. 安装程序 12. 使⽤介绍(图5) 53. 通讯格式之定义74. 附件：91. 安装程序1.1. 旋开685 上盖的四颗镙丝1.2. 由於运输途中,可能使分别在板槽J1,J3及J5的显⽰驱动器卡,记忆体卡及中央处理器卡与板槽接触不良,因此必须使⽤各电路板两端⽩⾊的启出杆启出各电路板,再重新插⼊以确保各电路板与板槽接触正常.(图1)1.3. 检查各接线插头接触良好(如将来685 需要移动,也需要重覆此步骤1⾄3)1.4. 记忆体卡的安装(图2)1.4.1.将写有"685C" 的691 PROM芯⽚依图2插⼊记忆体卡之691 晶⽚槽内。
注意红⾊三⾓形在左下⾓⽅向1.4.2.依图2和你的周边设备设置跨接线位置1.5. 电话线卡(图3)1.5.1.将电话线卡由板槽J6 起插⼊1.5.2.连接电话接头1.5.3.调整组别号码旋钮开关(如电话线卡#1调为1,电话线卡#2调为2.....)此号码会显⽰在前板数字发光⼆极管GRP.NO. 处1.6. 685接线(图4)1.6.1.连接电话线1.6.2.连接并⾏式打印机(J105). 开启打印机电源(某些打印机其PIN9 必须和PIN16 连接起来才能正常操作)1.6.3.连接外接警号(J104为常闭开关输出,开关最⼤额定值为12 伏特直流2安培)（需外接电源12VDC）1.7. 检查以上各步骤,证实⽆误後连接电源(220VAC,50Hz) 1.8. 这时685被启动,各指⽰灯闪亮,打印机会打印出⼀段⽂字1.9. 接⼊後备电池(J106,J107为并联)后⾯前⾯图 1 685机内俯视图图3 电话线卡电源模块检测串⾏式打印机（20脚为准备好线）：跨线2和3 检测串⾏式打印机（21脚为准备好线）：跨线1和2 不检测串⾏式打印机：出⼚时设置（跨线4和5）图2 记忆体卡设置2. 使⽤介绍(图5)2.1. 前板按钮功能2.1.1.AUTO/MANUAL ⾃动/⼿动开关a. 在AUTO ⾃动位置,如周边设备,如打印机,操作正常,则所有信息将⾃动输出.b. 在MANUAL ⼿动位置,任何信息将被储存在685记忆体中,直⾄操作员按下DISPLAY NEXT MESSAGE 显⽰下⼀信息键* 在AUTO ⾃动位置时,如685检测到周边设备故障,将⾃动切换⾄MANUAL⼿动模式. 685⾃动⽅式还与打印机、电脑选⽤设置及检测开关设置有关。
6850 系列控制器用户手册说明书
前言重要信息 (5)仪器概述 (5)控制器元件 (6)屏幕 (6)键盘 (7)状态屏幕 (8)浏览屏幕 (9)例：配置色谱柱 (9)配置仪器 (13)查看当前配置 (14)调整显示对比度 (14)配置显示器和键盘 (14)设定时间和日期 (17)配置 RS-232 端口 (17)IP 地址设定 (18)控制模式 (18)绘制信号图 (21)绘制多重信号 (24)方法设计方法 (27)将激活方法另存为被命名的方法 (28)将激活方法另存为SERVICE方法 ..30重新存储缺省方法 (30)使用 PC卡 (30)从GC把一个方法拷贝到PC卡上 31从PC卡把一个方法拷贝到GC (31)从PC卡删除方法 (32)存储方法到PC卡的列表中 (32)在GC存储器中存取方法 (33)流量和压力控制氢气关闭 (35)柱关闭 (35)电子气路控制 (36)气体流量开和关 (36)解释流量和压力显示 (36)配置色谱柱 (37)柱模式 (39)柱模式对进样口模式 (39)初始柱流量或压力 (41)程序控制流量或压力 (42)辅助通道 (43)配置热辅助类型 (44)配置气路 (44)设定辅助温度和压力 (45)设定辅助温度梯度 (46)解决流量和压力故障 (47)自动化进样器控制 (50)设置进样器参数 (50)清洗参数 (51)针头深度 (51)停留时间 (52)溶剂参数 (52)序列参数 (54)输入阀参数值 (55)非序列操作 (55)控制序列 (55)启动序列 (55)暂停序列 (56)恢复一个被暂停的序列 (56)取消被暂停的序列分析 (56)停止序列 (56)运行表 (56)存储信号值(Store Signal Value)和信号归零值( Signal zero - value)事件 (59)时钟表 (60)分流/不分流进样口使用氢气 (62)选项 (62)进样口模式 (62)进样口和色谱柱 (63)进样口设定 (64)预运行 (65)设定进样口模式 (66)分流/不分流的术语 (66)压力脉冲模式 (67)设定一个压力脉冲 (68)分流模式 (69)使用配置柱的分流模式 (70)使用未配置柱分流模式 (70)不分流模式 (71)气路 (71)不分流模式进样 (72)配置柱用于不分流模式 (73)未配置柱用于不分流模式 (74)载气节省 (74)吹扫填充进样口使用氢气 (76)进样口和色谱柱控制 (76)进样口设定 (77)使用吹扫填充进样口 (78)填充柱和未配置毛细管柱 (79)配置了的毛细管柱 (79)程序升温汽化进样口使用氢气 (80)进样口模式 (80)进样口和色谱柱 (81)进样口设定 (81)停止行为 (83)设定进样口模式 (84)加热进样口 (84)PTV 的术语 (86)脉冲模式 (87)设定压力脉冲 (88)已经配置色谱柱时使用脉冲不分流模式 (89)在色谱柱没有配置时使用脉冲无分流模式 (90)已经配置色谱柱时使用脉冲分流模式 (92)在色谱柱没有配置时使用脉冲分流模式 (93)分流模式 (94)对温度要考虑的事项 (95)已配置了色谱柱使用分流模式 (95)在没有配置色谱柱时使用分流模式 97不分流模式 (98)流路图 (98)对温度要考虑的事项 (100)启动值 (101)已经配置色谱柱时使用不分流模式 (102)在没有配置色谱柱时使用无分流模式 (103)溶剂放空模式 (104)流动形式 (104)对温度、压力和流速要考虑的事项 (106)操作次序 (108)时间排列 (109)什么是开始运行? (110)已经配置色谱柱时使用溶剂放空模式 (110)未配置色谱柱使用溶剂放空模式 ..111大体积进样 (112)冷柱头进样口进样口温度 (120)冷气流（选项） (120)跟踪柱温箱模式 (121)温度程序模式 (121)设定值的范围 (121)操作冷柱头进样口 (122)热导检测器使用氢气 (124)操作条件 (124)TCD 参数 (124)尾吹气 (127)极性 (128)信号选择 (129)模拟输出 (131)使用TCD (132)火焰离子化检测器使用氢气 (134)检测器操作注意事项 (134)喷嘴 (135)电位计 (135)尾吹气 (136)尾吹气模式 (136)信号选择 (137)模拟输出 (139)自动再点火－点火补偿 (139)FID 参数 (140)使用 FID (142)微池电子捕获检测器线性 (144)检测器气体 (145)温度 (145)电位计 (145)模拟输出 (145)操作检测器 (146)柱箱柱箱性能 (148)柱箱安全措施 (148)柱箱设定 (149)建立恒温运行 (150)程序升温 (151)柱补偿 (154)建立柱补偿图 (155)应用柱补偿谱图 (156)火焰光度检测器(FPD)使用氢气 (158)概述 (158)线性 (159)使用点火补偿 (159)点燃火焰 (160)使用电位计 (161)信号选择 (162)数据速率 (163)使用快速出峰 (163)选择尾吹气模式 (164)加热器配置 (165)FPD 参数 (165)使用FPD (166)阀阀类型 (168)配置阀 (169)进样阀 (169)带进样阀的多通阀 (171)手动控制阀 (172)手动转动一个阀 (172)设定阀箱温度 (173)设置阀箱温度 (173)维修方法维修屏幕 (174)运行记录本 (174)故障诊断 (175)查看诊断状态 (175)泄漏检测（所有的进样口） (175)分流出口检测（仅用于分流/不分流进样口和PTV进样口） (178)喷嘴检测 (180)键盘检测 (182)校正 (182)维修 (186)使用早期维修反馈 (187)重新设定维修期限 (188)决定维修期限 (189)升级功能 (190)GC升级 (190)进样器固件升级 (191)控制器固件升级 (192)前言重要信息©安捷伦科技公司 1998, 1999, 2000, 2002, 2004版权所有，未经书面许可不得擅自复制、引用或翻译，符合版权法者例外。
r980t-manual-chinese说明书
1. Connecting the speakers1. Conexión de los parlantesConecte el parlante activo y el pasivo con el cable de conexión proporcionado. A continuación, conecte los cables de colores a las1. Lautsprecher anschließenVerbinden Sie die aktiven und passiven Lautsprecher mit dem mitgelieferten Lautsprecherkabel. Bitte verbinden Sie das farbigmarkierte Kabel mit der rechten Kabelklemme (das red Kabel mit der roten Klemme und das schwarz mit der schwarzen1. Connessione degli altoparlantiCollegare l'altoparlante attivo e quello passivo con il cavo di connessione incluso (cavo resso al morsetto cavo rosso e cavo14Español1. Bass-Einstellung2. Master Lautstärkeregler3. Line-in-Eingang4. EIN/AUS Schalter5. Netzanschlußkabel6. Kabelklemme1. Bassi2. Controllo volume master3. Segnale ingresso4. Interruttore dell'alimentazione5. Cavo di alimentazione6. Morsetto del cavo1. Bass adjustment2. Master volume control3. Line-in4. Power switch5. Power cord6. Wire clip1. Reguladore de grave2. Control de volumen maestro3. Entrada de línea4. Interruptor de encendido5. Cable de alimentación6. Abrazadera para cable2English8Français1. Trimmer de basses2. Contróle de volume principal3. Entrée ligne4. Interrupteur d'alimentation5. Cordon d’alimentation6. Attaches des câbles1. Connecter les haut-parleursConnecter les haut-parleurs actif et passif avec les câbles de connexion haut-parleur fournis ;connecter les câbles aux attaches selon leur couleur (le câble roug à l’attache rouge et le câble noir à l’attache noire).20Deutsch26Italiano R LR LR LR LR LPleasevisitourwebsiteat:,oremailEDIFIERSupportforfurtherassistanceat:****************,Please visit our website at: or email EDIFIER Support for further assistance at:*******************,Pleasevisitourwebsiteat:www.edifier.caoremailEDIFIERSupportat:******************If you prefer, you may contact us by phone, Toll Free: 1-877-EDIFIER (334-3437) in Canada,Veuillez consulter notre site Internet sur: , ou adresser un email au Support EDIFIER pour plusd’assistanceà:****************,Veuillez consulter notre site Internet sur: , ou adresser un email au SupportEDIFIERpourplusd’assistanceà:*******************,Veuillez consulter notre site Internet sur: www.edifier.ca ou adresser un email au Support EDIFIER à:******************Besuchen Sie unsere Webseite unter: , oder schreiben Sie eine E-Mail an den EDIFIER SupportfürweitereInformationenunter:****************,Besuchen Sie unsere Webseite unter: oder schreiben Sie eine E-Mail an denEDIFIERSupportfürweitereInformationenunter:*******************,Besuchen Sie unsere Webseite unter: www.edifier.ca oder schreiben Sie uns eine E-Mail an den EDIFIERSupportunter:******************Visita il nostro sito web: , o invia un e-mail al Supporto EDIFIER per ulteriore assistenza a:****************,Visita il nostro sito web: o invia un e-mail al Supporto EDIFIER per ulterioreassistenzaa:*******************,Visitailnostrositoweba:www.edifier.caoscriviun’e-mailalSupportoEDIFIERa:******************Se preferisci, puoi contattarci telefonicamente, Numero Verde: 1-877-EDIFIER (334-3437) in Canada,。
rn6854规格书
RN6854规格书1. 项目背景RN6854是一份规格书，旨在详细说明某个产品的规格要求，以便开发团队能够根据这些要求进行产品的设计和开发工作。
本规格书的编写是为了确保产品能够满足客户的需求，并提供给相关利益相关者参考。
2. 产品概述RN6854是一款新型电子设备，主要用于解决特定问题。
该设备具有以下特点： -高性能处理器：采用先进的处理器技术，能够快速运行复杂的算法和应用程序。
- 大容量存储：内置大容量存储器，可以存储大量数据和文件。
- 高清显示屏：配备高清显示屏，能够提供清晰、逼真的图像和视频显示效果。
- 多功能接口：支持多种数据接口，方便用户连接外部设备和传输数据。
- 长续航时间：采用高效能源管理技术，能够提供较长的续航时间。
- 安全可靠：具备完善的安全机制，保护用户的隐私和数据安全。
3. 技术规格3.1 处理器RN6854采用先进的处理器技术，具备以下性能特点： - 主频：2.5 GHz - 核心数：8核 - 缓存：12 MB - 架构：64位3.2 存储RN6854内置大容量存储器，提供以下存储选项： - 内存容量：8 GB / 16 GB /32 GB - 存储类型：固态存储器（SSD） - 扩展存储：支持MicroSD卡，最大支持128 GB3.3 显示屏RN6854配备高清显示屏，具备以下特性： - 尺寸：15.6英寸 - 分辨率：1920 x 1080 - 屏幕比例：16:9 - 技术：LED背光 - 触控：支持多点触控3.4 接口RN6854提供多种接口，方便用户连接外部设备和传输数据： - USB接口：2个USB 3.0接口，1个USB 2.0接口 - HDMI接口：1个HDMI输出接口 - 以太网接口：1个千兆以太网接口 - 无线接口：802.11ac Wi-Fi，蓝牙5.03.5 电池RN6854采用高效能源管理技术，能够提供较长的续航时间： - 电池容量：60 Wh- 续航时间：最长可达8小时3.6 安全性RN6854具备完善的安全机制，保护用户的隐私和数据安全： - 生物识别：支持指纹识别技术，确保只有授权用户可以访问设备。
AT89S52系列规格书,Datasheet 资料
2.2 44-lead TQFP
2.3 44-lead PLCC
(MOSI) P1.5 7 (MISO) P1.6 8 (SCK) P1.7 9
RST 10 (RXD) P3.0 11
NC 12 (TXD) P3.1 13 (INT0) P3.2 14 (INT1) P3.3 15
(T0) P3.4 16 (T1) P3.5 17
VCC GND
RAM ADDR. REGISTER
P0.0 - P0.7 PORT 0 DRIVERS
P2.0 - P2.7 PORT 2 DRIVERS
RAM
PORT 0 LATCH
PORT 2 LATCH
FLASH
AT89S52
B REGISTER
ACC
STACK POINTER
PROGRAM ADDRESS REGISTER
4.4 Port 1
Port 1 is an 8-bit bidirectional I/O port with internal pull-ups. The Port 1 output buffers can sink/source four TTL inputs. When 1s are written to Port 1 pins, they are pulled high by the internal pull-ups and can be used as inputs. As inputs, Port 1 pins that are externally being pulled low will source current (IIL) because of the internal pull-ups.
移动5G产品介绍及配置说明---中兴通讯
移动5G产品介绍及配置说明---中兴通讯中国移动5G配置说明A9611A S26BBUAAU RRU设备V92005G产品一览64TR AAU2TR RRU QcellA9611E S49A9611A S2664TR AAU 8TR RRU R8998E S2600R9606 S26R8139 T2600R8139 M90182326R8139 M182326R8139 M1826 5G设备应用场景场景分类通道数RRU应用场景室外型64TRA9611A S26室外D频段4/5G混摸站点新建A9611E S49室外4.9G频段(高容量、行业应用)站点新建8TR R8998E S2600室外D频段高铁高速以及深度覆盖，补盲补热等特殊场景室内型2TR R9606 S26室内分布D频段站点新建，高铁及隧道覆盖场景分布式微站4TRR8139 T2600室内D频段独立覆盖场景R8139 M90182326室分D/E/1.8G/900M频段覆盖多模大容量场景R8139 M182326室分D/E/1.8G频段覆盖多模大容量场景R8139 M1826室内D/1.8G频段双模覆盖场景大容量多模BBU —— V9200电源板基带板交换管理板智能风扇最大配置15个64TR 100MHz NR小区90个20MHz LTE小区/2U 接口类型及数量10GE/25GE*2尺寸2U/19英寸重量18kg（满配）同步方式GPS/北斗/1588V2供电方式-48VDC/220VAC 功耗315W(S111配置)安装方式19英寸机柜安装、挂墙安装、室外一体化机柜安装、HUB柜安装基带板基带板基带板基带板交换管理板/加速板电源板/环境监控板卡介绍—— V9200板卡名称型号板卡能力V9200 交换管理模块VSW VSWc2用于控制和管理基带单元，并提供传输接口和系统时钟。
支持10GE/25GE*2，40GE/100GE*2，支持1pps+TOD接口，支持GPS和北斗V9200 基带处理模块VBP VBPc55G基带板：每单板支持3*64T64R*100MHz 小区；6*25G+1*100G光口V9200 直流电源模块VPD VPD提供-48VDC电源，支持1+1主备， 2000WV9200 风扇模块VFC VFc1智能风扇模块V9200 环境监控模块VEM VEMc1默认不配置，室外柜配置，提供12路干接点+ RS232+RS485通信接口AAU及RRU产品规格介绍通道设备型号供电方式工作带宽输出功率接口类型64TR AAU A9611A S26直流/交流（由外置P3000A供电160MHz240W4*25G（SFP28），光A9611E S49直流/交流（由外置P3000A供电）100MHz200W1*25G（SFP28），光8TR RRU R8998E S2600直流/交流（由外置P3000A供电）160M8 x 40 W3x10G，光2TR RRU R9606 S26直流/交流160M2*100W2x10G/25G，光QCELLR8139 T2600 POE160M4*250mW1*10G 光电复合缆(SFP28)1*10G CAT6A(RJ45)R8139 M90182326POE160M4*250mW1*10G 光电复合缆(SFP28)1*10G CAT6A(RJ45)R8139 M182326POE160M4*250mW1*10G 光电复合缆(SFP28) 1*10G CAT6A(RJ45)R8139 M1826POE160M4*250mW1*10G 光电复合缆(SFP28)1*10G CAT6A(RJ45)工作频段2515 - 2675 MHz 光接口 4 x 25G(SFP28)通道数64T64R 阵子数192输出功率240 W 供电方式-37VDC 至 -57VDC IBW160 MHz OBW160 MHz 支持移动完整的 160MHz 频段0103支持eCPRI接口，一根 25G 光纤即满足传输要求0264通道、192天线阵子、支持4/5G共模工作频段4800~5000MHz 光接口2 x 100G(QSFP28) + 1 x 25G(SFP28)通道数64T64R 阵子数192输出功率200W 供电方式-37VDC 至 -57VDCIBW200 MHz OBW100 MHz 4.9GHz频段帧结构灵活配置，满足垂直行业应用010302室外2.6GHz频段容量补充，补盲多场景应用支持eCPRI接口，一根 25G 光纤即满足传输要求8T8R R8998E S2600—5G高铁覆盖，支持45G混模u 8T8R 160MHz全带宽设备，大功率320W；u 45G混模；u满足5G高铁覆盖；R8998E S2600工作频段Band41：2515-2675MHz OBW160 MHz IBW160 MHz 输出功率8 x 40 W 通道数8T8R光口3x10GDAS 2T2R RRU—R9606 S26u 160MHz全带宽u DAS信源设备，快速建设室内5G覆盖u满足高铁、地铁等隧道5G建设R9606 S26工作频段Band41：2515-2675MHz OBW160 MHz IBW160 MHz 输出功率2x 100 W 通道数2T2R光口2x10G/25G供电方式AC/DC条目指标型号R8139 T2600R8139 M90182326R8139 M182326R8139 M1826频段2.6G（160M）四频 900M+ 1.8G + 2.3G+ 2.6G（160M）三频1.8G + 2.3G+ 2.6G（160M）双频1.8G + 2.6G（160M）载波配置5GNR 100MHz5GNR 100MHz+ 5个20M LTE载波5GNR 100MHz+ 4个20M LTE载波5GNR 100MHz+ 4个20M LTE载波接口1*10G 光电复合缆1*10G CAT6A1*10G 光电复合缆1*10G CAT6A 1*10G 光电复合缆1*10G CAT6A 1*10G 光电复合缆1*10G CAT6A 供电方式POEPOE POE POE 天线内置天线内置天线内置天线内置天线机顶功率 4 x 250 mW 4 x 250 mW 4 x 250 mW 4 x 250 mWPico RRU4T4R QCell设备介绍-pRRU2.6G 64TR和8TR宏站-NSA分框中移集团技术规范：《中国移动5G NR无线网络主设备技术要求--N41 64通道AAU分册V100》《中国移动5G NR无线网络主设备技术要求--高铁分册V100》工作频段RRU的射频滤波器支持2515MHz - 2675MHz频段。
L6599芯片中文资料讲课讲稿
L6599芯片中文资料L6599高压谐振控制器特征⏹ 50%占空比，谐振半桥变频控制 ⏹ 高精度振荡器⏹ 高至500kHz 的工作频率 ⏹ 两级过流保护：变频和停机闭锁 ⏹ 与PFC 控制器的接口 ⏹ 自锁禁止输入 ⏹ 轻载脉冲工作模式⏹ 上电/断电顺序或欠压保护输入 ⏹ 单调输出电压上升为非线性软启动⏹ 整合了一个能够承受600V 以上电压的高压浮动结构和一个同步驱动式高压横向双扩散金属氧化物半导体(LDMOS)器件，节省了一个外部快速恢复自举二极管⏹ 用低电压下拉方式为两个栅驱动器提供一个输出电流0.3A 和灌入电流0.8A的典型峰值电流处理能力。
⏹ DIP-16，SO-16N 两种封装特征⏹ 液晶电视和等离子电视的电源序号编码器件编码 封 装 包 装 L6599D SO-16N 管装 L6599DTR SO-16N 卷带 L6599NDIP16管装⏹台式电脑和初级服务器⏹电信设备开关电源⏹交直流适配器的开关电源框图目录1 驱动描述 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 引脚设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52.1 引脚排列 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52.2 引脚功能说明 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 典型系统框图 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 电气数据 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.1 极限参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74.2 热相关数据 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 电气参数 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 典型的电气性能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 应用资料 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157.1 振荡器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167.2 工作在空载或非常轻的负载状态 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187.3 软启动 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217.4 电流检测，过流保护和过载保护 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237.5 闭锁关机 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267.6 LINE检测功能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277.7 自举部分 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287.8 应用实例 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 封装外形尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 修订记录 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 驱动描述L6599是一个用于谐振半桥拓扑电路的精确的双端控制器。
A-685掩膜支架安装提示说明书
A-685Mounting Bracket ➤Suction Service ValveInstallation TipsRemove the flange plate, spacer plates, springs and cardboard separators before brazing the suction filter shell into the line. The connections on the shell are copper and can be installed with all normal soldering or brazing material including soft solder, Sta-Brite, Easy-Flo, silver brazing alloys, Sil-Fos or Phos-Copper. For best results, wrap a wet rag around the end of the shell and direct the flame of the torch away from the shell while brazing . In this way one can avoid damaging the paint on the shell andmaintain proper protection from corrosion.screwed into the 1/4" NPT hole in the flange plate. Pipe dope (preferably teflon tape) should be used on the threads to prevent leakage. Then install the access valve core in this fitting. After installation in the suction line, with the side fitting as the inlet,the access valve permits measuring the pressure drop from theupstream side of the filter to the gauge connection on the com-pressor suction service valve, and thus determining if the filter element is plugged. When the access valve is not in use, keep it capped to avoid possible leaks.ReplaceableBEFORE INSTALLINGSporlan Replaceable Suction Filters can be installed in either flow direction , whichever is simpler for piping the individual job. The unit may be installed in either a vertical or horizontal line. However, it is advisable to mount the shell so foreign material cannot drop into it when the elements are removed. Also avoid installing the shell in such a manner that it traps an excessive amount of oil.CAUTION: The Replaceable Suction Filter must be installed with the side fitting as the inlet when Catch-All ® cores are used. This also provides the use of the access valve for pressure drop measurements.When making the installation allow 6-3/4" beyond the flange plate for pull space in removing the filter element. Since the elements are installed in a "muzzle loading" fashion, the pull space is the same for shells using two elements as for the shells using one element.The Sporlan A-685 mounting bracket should be used to support the shell to avoid undue strain on the refrigerant piping.®The filter elements (purchased separately) are installed in place of the cardboard spacers shipped with the unit. Detailed instructions for installing the elements are given on the filter element package. Inspect the edge of the shell and the gasket surface immediately before installing the flange plate to obtain a clean, leak-tight joint. A new gasket is supplied with each filter element. It is recommended that this gasket only be replaced if it is damaged.THE PROPER FILTER ELEMENTThe Sporlan RPE-48-BD Filter Element is recommended for use in all Replaceable Suction Filters. The pleated paper filter element will collect a very large amount of dirt before plug up occurs. This element is suitable for flow in either direction.CATCH-ALL CORES (RC-4864, RC-4864-HH or RCW-48) can be used in Replaceable Suction Filters if certain precautions are followed. The side fitting must be the inlet. Also a special 100 mesh screen (Sporlan Part No. 6171-5) must be obtained from your wholesaler and installed in the outlet end of the core assembly. It is placed between the core and spacer plate at the outlet end as shown in the diagram. This screen will collect any Flow ➠If a bolt is lost or a nut is stripped while installing the flange plate, be sure to obtain a replacement. Installing the flange plate with less than the proper number of flange bolts will very likely result in a refrigerant leak, and could result is an explosion hazard. The bolts should be tightened to a torque value of 14-16 ft. lbs.© C OPYRIGHT 2004 BY S PORLAN V ALVE C OMPANY , W ASHINGTON , M ISSOURISD-107-604P RINTED IN U.S. OF A.FOR USE ON REFRIGERATION and/or AIR CONDITIONING SYSTEMS ONLYThe Replaceable Suction filters are not recommended for use at temperatures below - 50°F. The Sporlan Replace-able Suction Filters are recommended for use in the suc-tion line of R-12, R-134a, R-22, R-404A, R-407C, R-410A, R-502, R-507, and similar halocarbon refrigerant systems.small particles that might be rubbed off the core during assem-bly. The screen should be removed with the molded cores when cleanup is complete. The screen should not be used when filter elements are used.No. 6171-5。
DA-685系列产品配件兼容性指南说明书
DA-685 SeriesComponent Compatibility GuideA list of peripheral components suitable for use with the DA-685 series of computers2016/07/05 Version 2.0Copyright Notice©2016 Moxa Inc.All rights reserved.TrademarksThe MOXA logo is a registered trademark of Moxa Inc.All other trademarks or registered marks in this manual belong to their respective manufacturers.DisclaimerInformation in this document is subject to change without notice and does not represent a commitment on the part of Moxa.Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the products and/or the programs described in this manual, at any time.Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from its use.This document might contain unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication.Technical Support Contact Information/supportMoxa AmericasToll-free: 1-888-669-2872 Tel: +1-714-528-6777 Fax: +1-714-528-6778 Moxa China (Shanghai office) Toll-free: 800-820-5036Tel: +86-21-5258-9955Fax: +86-21-5258-5505Moxa EuropeTel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific Tel: +886-2-8919-1230 Fax: +886-2-8919-1231Moxa IndiaTel: +91-80-4172-9088 Fax: +91-80-4132-10451. IntroductionThis document lists hardware components that are proven to provide the performance listed in the specification when used with the Moxa DA-685 series of embedded computers, or computers that share basic design features with the DA-685 series. Moxa computers come with multiple peripheral options and are engineered to work with components having different hardware specifications. This flexibility could sometimes lead to compatibility issues. When used with the DA-685 series of embedded computers, peripherals from one manufacturer may not work as well as the ones made by another manufacturer. Moxa provides this list of DA-685 series-compatible components, so that users can be certain of a reliable performance from the DA-685 series, when used with the components listed in this document.2. Testing MethodsTo validate that a component meets the Moxa standards for quality and performance, the following five key compatibility tests are run:•Ambient temperature burn-in•Low temperature hard start•Heat/humidity burn-in•Cyclic high-low temperature burn-in•Vibration testAmbient Temperature Burn-InThe component is mounted on to a DA-685 computer and put through a series of stress tests at an ambient temperature of around 25˚C, for a specified period of time. The duration of the test is determined based on the class of peripherals being tested.Low Temperature Hard StartThe component is mounted on to an unpowered DA-685 computer and then the system is booted up at an extremely low temperature. The designated low temperature value depends on the computer model being tested.Heat/Humidity Burn-InThe component is mounted on to a DA-685 computer, placed in a temperature- andhumidity-controlled enclosure, and then put through the burn-in test for a specified period of time. The temperature, humidity, and time targets vary depending on the specification of the computer model used in the test.Cyclic High-Low Temperature Burn-InThe component is mounted on to a DA-685 computer, placed in a temperature controlled enclosure, and then put through the burn-in test wherein the temperature is cyclically varied from very high to very low and back again, over a specified period of time. The target temperature range and the duration of the test can vary depending on the specification of the computer model used in the test.Vibration TestThe component is mounted on to a DA-685 computer that is bound inside an electromagnetic vibrator, and then put through random vibration tests along three orthogonal axes: longitudinal, transverse, and vertical. The vibration tests are compliant with the EN50155/IEC61373 vibration standards.3. Storage EnduranceStorage media, such as SSDs, CF cards, SD cards, Disk on Module, and Cfast, are composed of different electrical components. The main electrical components in these storage media, the NAND-flash memory and NAND-flash controller, impact the storage endurance and lifespan of the storage media.NAND-Flash Memory EnduranceNAND-flash memories have a limit on the number of times they can be programmed and erased (P/E). The P/E cycle as well as the erase count of a NAND-flash memory can be used to determine this limit. For example, an SLC (single-level cell) flash memory has a 60,000 P/E cycle, an MLC (multi-level cell) flash memory has a 3,000 P/E cycle, and TLC NAND flash memories have P/E cycle values up to 1,000. Each flash memory type has a different endurance level, which is why the storage lifespan is based on the flash memory type. Storage that uses SLC type flash memory could have the best endurance level compared with the MLC type storage. SLC storage usually comes with a 5-year OEM warranty (the actual warranty period depends on the original manufacturer). MLC storage only comes with a 1- to 3-year warranty. The major differences between SLC and MLC are: (a) The SLC NAND flash has a lifespan that is around 20 times that of an MLC, and (b) The price can differ by a factor of 4 to 5. The SLC type of storage is recommended for systems that are expected to have high reliability, and for applications that need to frequently write data to a storage medium.Terabytes Written (TBW)TBW is the unit used to evaluate SSD endurance. In actual applications, storage is used for routine operations and data access. Therefore the physical P/E cycle is not appropriate for describing thetotal rewritable data capacity result. For these reasons, Joint Electron Device Engineering Council (JEDEC) has defined a standard for SSD endurance evaluation called JESD218, which uses TBW to measure the endurance of the storage memory. By referring to this TBW value, users can easily estimate the storage specification and select a suitable storage for real-life use cases. For example, when routine operations need a maximum of 20 GB and the expected storage lifespan is 3 years, the total rewritable data demand would be 21.9 TBW (20 GB x 365 x 3). In this case, a storage that has more than 21.9 TBW will meet the requirement. We recommend selecting a storage media with a TBW that is greater than the calculated value.4. Declaration for Liability ExclusionThe specifications, warranty terms, and liability of items listed in this guide are the sole responsibility of the original manufacturers. Moxa does not take any responsibility in this regard. Please visit the manufacturers’ official websites for up-to-date product information before purchasing the components.5. Compatible ComponentsPeripheral components that have been tested and found suitable for use with the DA-685 series of computers are listed in this section. The following table lists the Test Codes and their descriptions:Test Code DescriptionA The component has passed the ambient temperature verification testB The component has passed the low temperature verification testC The component has passed the heat/humidity verification testD The component has passed the cyclic high-low temperature verification testE The component has not been tested, but is similar to another component that has been tested in terms of its material and design.F The component has passed the vibration verification testDRAMVendor MemorySize Moxa’s PN Vendor’s PN Interface Chip Brand Speed Test Codes DSL 1 GB N/A D2SM64162XH30ABIS DDR2 Micron 667 MHz B, C, D DSL 1 GB 1352110012030 D2SP64162XH30AAIS DDR2 ProMOS 667 MHz B, C, D DSL 2 GB 1352110022070 D2SP28082XH30ABIS DDR2 ProMOS 667 MHz B, C, D DSL 2 GB N/A D2SM28082XH30ABIS DDR2Micron 667 MHz B, C, D DSL 2 GB 1352110022080 D2SH28082XH30AB DDR2Hynix 667 MHz B, C, D DSL 4 GB 1352110042040 D2SM56082XH30AB DDR2Micron 667 MHz B, C, D InnoDisk 2 GB N/A M2SJ-2GPF2W05-B DDR2ProMOS 667 MHz B, C Transcend 1 GB N/A TS128MSQ64V8U DDR2Samsung 800 MHz E Transcend 2 GB N/A TS256MSQ64V8U DDR2Samsung 800 MHz A Transcend 2 GB N/A TS256MSQ64V6U-I DDR2Hynix 667 MHz B, C, D Unigen 2 GB N/A UG25T6400M8SU-8CP-000-00 DDR2Hynix 800 MHz B, C, DDOMVendor StorageSize Moxa’s PN Vendor’s PNFlashMemoryBrandFlashMemorySpecController Firmware Warranty WarrantyExclusionTestCodesInnoDisK 2 GB 1352020022080 DE4H-02GD31W1DB-A31 N/A SLC N/A N/A 5 years Endurance >60,000 B, C Memoright 1 GB N/A MRDEM2B001GB7P1IA0 Samsung SLC SM2232 K0407 5 years N/A E Memoright 2 GB N/A MRDEM2B002GB8P1IA0 Samsung SLC SM2232 K1124 5 years N/A B, C, D Memoright 8 GB N/A MRDEM2B008GN2P1IA0 Micron SLC SM2232 K0407 5 years N/A B, C, D Silicon Power 8 GB N/A SP008GBIFM44FOV10-MA Samsung SLC N/A N/A 3 years N/A B, C, D Transcend 1 GB N/A TS1GDOM44V-S Samsung SLC SM223 AC N/A 2 years N/A E Transcend 2 GB N/A TS2GPTM510-44V Samsung SLC SM2231 AD N/A 2 years N/A E Transcend 4 GB N/A TS4GPTM510-44V Samsung SLC SM2231 AD N/A 2 years N/A E Transcend 8 GB N/A TS8GPTM510-44V Samsung SLC SM2231 AD N/A 2 years N/A ACFVendorStorage SizeMoxa’s PNVendor’s PNFlash MemoryBrandFlash Memory SpecControllerFirmwareWarrantyWarranty ExclusionTest CodeApacer 4 GB N/A AP-CF004GL9FS-NR N/A MLC N/A N/A 2 years Endurance > 3,000 E Apacer 8 GB N/A AP-CF008GL9FS-NR N/A MLC N/A N/A 2 years Endurance > 3,000 E Apacer 8 GB N/A AP-CF008GLAFS-NR N/A MLC N/A N/A 2 years Endurance > 3,000 E Apacer 16 GB N/A AP-CF016GLAFS-NR N/A MLC N/A N/A 2 years Endurance > 3,000 E Apacer 16 GB N/A AP-CF016GL9FS-NR N/A MLCN/A N/A 2 years Endurance > 3,000 E Apacer 32 GB N/A AP-CF032GL9FS-NR N/A MLC N/A N/A 2 years Endurance > 3,000 A Apacer 32 GB N/A AP-CF032GLAFS-NR N/A MLC N/A N/A 2 years Endurance > 3,000A Transcend 128 MB N/A TS128MCF200I Samsung MLC SM2232AD N/A 2 years N/AE Transcend 256 MB N/A TS256MCF200I Samsung MLC SM2232AD N/A 2 years N/A E Transcend 512 MB N/A TS512MCF200I Samsung MLC SM2232AD N/A 2 years N/A E Transcend 1 GB N/A TS1GCF133 SanDisk/ MicronMLC SM2232AD N/A 2 years N/A E Transcend 1 GB N/A TS1GCF200I Samsung MLC SM2232AD N/A 2 years N/A E Transcend 2 GB N/A TS2GCF133 SanDisk/ MicronMLC SM2232AD N/A 2 years N/A E Transcend 2 GB N/A TS2GCF200I Samsung MLC SM2232AD N/A 2 years N/A E Transcend 4 GB N/A TS4GCF133 SanDisk/ MicronMLC SM2232AD N/A 2 years N/A E Transcend 4 GB N/A TS4GCF200I Samsung MLCSM2232AD N/A 2 years N/A A Transcend 8 GB N/A TS8GCF400 SanDisk/ Micron MLC SM2236AC N/A 2 years N/A E Transcend 8 GB N/A TS8GCF133 SanDisk/ MicronMLC SM2232AD N/A 2 years N/A E Transcend 8 GB N/A TS8GCF200I Samsung MLCSM2232AD N/A 2 years N/A E Transcend 16 GB N/A TS16GCF1000 SanDisk/ Micron MLC SM2232ENAC N/A 2 years N/A E Transcend 16 GB N/A TS16GCF400 SanDisk/ Micron MLC SM2236AC N/A 2 years N/A E Transcend 16 GB N/A TS16GCF133 SanDisk/ MicronMLC SM2232AD N/A 2 years N/A E Transcend 16 GB N/A TS16GCF200I Samsung MLCSM2232AD N/A 2 years N/A E Transcend 32 GB N/A TS32GCF1000 SanDisk/ Micron MLC SM2236AC N/A 2 years N/A A Transcend 32 GB N/A TS32GCF400 SanDisk/ Micron MLC SM2236AC N/A 2 years N/A A Transcend 32 GB N/A TS32GCF133 SanDisk/ MicronMLC SM2232AD N/A 2 years N/A E Transcend32 GBN/ATS32GCF200ISamsungMLCSM2232ADN/A2 yearsN/AASSDVendorStorage SizeMoxa’s PNVendor’s PNFlash MemoryBrandFlash Memory SpecControllerFirmwareWarrantyWarranty ExclusionTest CodesApacer 64 GB N/A AP64GAS510SB N/A MLC N/A N/A 2 years Endurance > 3,000 A InnoDisk 32 GB N/A DGS25-32GD67SC1QCP Samsung MLC N/A N/A 2 years Endurance > 3,000 B, C, D InnoDisk 32 GB N/A DGS25-32GD81SC1QCP Toshiba MLC N/A N/A 2 yearsEndurance > 3,000B, C Memoright 32 GB N/A MRSAJ6C032GC125C00 Micron MLC JMF612 MRV1.1.5 3 years Endurance > 3,000 B, C, D Memoright 32 GB N/A MRSAJ9A032GTT25C00Toshiba MLC JMF667 MRV1.71b 3 years Endurance > 3,000B, C, D Transcend 16 GB N/A TS16GSSD500 Samsung SLC JM616 120820 2 years N/A E Transcend 32 GB N/A TS32GSSD500 Samsung SLC JM616 120820 2 years N/A E Transcend 64 GB N/A TS64GSSD320 SanDisk/ MicronMLC SF2281 N/A 2 years N/A E Transcend 64 GB N/A TS64GSSD500 Samsung SLC JM616 120820 2 years N/A A Transcend 128 GB N/A TS128GSSD320 SanDisk/ Micron MLC SF2281 N/A 2 years N/A E Transcend256 GBN/ATS256GSSD320SanDisk/ MicronMLCSF2281N/A2 yearsN/AAHDDVendor StorageSize Moxa’s PN Vendor’s PN Controller Firmware Test Code HGST 500 GB N/A HTS725050A7E630 / 0J38075 N/A N/A A HGST 1 TB N/A HCC541010A9E680 N/A N/A A HGST 1 TB N/A HTS541010A9E680 N/A N/A A HGST 1 TB N/A HTS721010A9E630 / 0J22423 N/A N/A A HGST 1 TB N/A HTS541010A9E650 N/A N/A A Samsung 2 TB N/A ST2000LM003 N/A N/A A WD 750 GB N/A WD7500BPKT N/A N/A A WD 1 TB N/A WD10JUCT N/A N/A A WD 1 TB N/A WD10JPVT N/A N/A A WD 1 TB N/A WD10SPCX N/A N/A A。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Low-Cost, Green-Mode PWM Controller for Flyback ConvertersFeaturesGreen-Mode PWMSupports the “Blue Angel” StandardLow Startup Current: 9μALow Operating Current: 3mA300mA Driving CapabilityLeading-Edge BlankingConstant Output Power LimitUniversal InputBuilt-in Synchronized Slope CompensationCurrent-Mode OperationCycle-by-cycle Current LimitingUnder-Voltage Lockout (UVLO)Programmable PWM Frequency with Frequency HoppingV DD Over-Voltage Protection (Auto Restart)Gate Output Voltage Clamped at 17VLow CostFew External Components RequiredSmall SSOT-6 PackageApplicationsGeneral-purpose switching mode power supplies and flyback power converters, such as:Battery chargers for cellular phones, cordless phones, PDAs, digital cameras, and power toolsPower adapters for ink jet printers, video game consoles, and portable audio playersOpen-frame SMPS for TV/DVD standby and auxiliary supplies, home appliances, and consumer electronics Replacements for linear transformers and RCC SMPS DescriptionThis highly integrated PWM controller provides several enhancements designed to meet the low standby-power needs of low-power SMPS. To minimize standby power consumption, the proprietary green-mode function provides off-time modulation to linearly decrease the switching frequency under light-load conditions. This green-mode function enables the power supply to meet even the strictest power conservation requirements.The BiCMOS fabrication process enables reducing the startup current to 9μA and the operating current to 3mA. To further improve power conservation, a large startup resistance can be used. Built-in synchronized slope compensation ensures the stability of peak current mode control. Proprietary internal compensation provides a constant output power limit over a universal AC input range (90V AC to 264V AC). Pulse-by-pulse current limiting ensures safe operation during short-circuits.To protect the external power MOSFET from damage by supply over voltage, the SG6859A’s output driver is clamped at 17V. SG6859A controllers can be used to improve the performance and reduce the production cost of power supplies. The best choice for replacing linear and RCC-mode power adapters, the SG6859A is available in 8-pin DIP and 6-pin SSOT-6 packages.Figure 2. Functional Block Diagram*Marking for SG6859ADZ (Pb-free)F- Fairchild LogoZ- Plant CodeX- 1-Digit Year CodeY- 1-Digit Week CodeTT: 2-Digit Die Run CodeT: Package Type (D=DIP) *Marking for SG6859ADY (Green Compound)Figure 3.feedback to the internal PWM comparator, so that the PWM comparator can control 7 2 FBthe duty cycle.Ground8 1 GNDDCY SAW Duty Cycle of SAW Limit 40 % Oscillator Sectionf OSC Frequency Center FrequencyR I=95kΩ65 70 75kHz Hopping Range ±4.9T HOP HoppingPeriod R I=95kΩ 3.7 msf OSC-G Green-ModeFrequency R I=95kΩ20kHzf DV Frequency Variation vs. V DD Deviation V DD=13.5 to 22V 0 0.02 2.00 %f DT Frequency Variation vs. Temp. Deviation T A=-20 to 85°C 2 %Output Section67.068.069.070.0F O S C (K H z )67.068.069.070.0D C Y M A X (%)Increasing the resistance reduces the amplitude of the input current and the switching frequency. A 95k Ω R I resistor results in a 50µA constant current, I I , and a 70kHz switching frequency. The relationship between R I and the switching frequency is: (kHz))(k R 6650f I PWM Ω=(1) The recommended f PWM is from 50kHz to 80kHz.Leading-Edge BlankingEach time the power MOSFET is switched on, a turn-on spike occurs at the sense-resistor. To avoid premature termination of the switching pulse, a 320ns leading-edge blanking time is built in. Conventional RC filtering can be omitted. During this blanking period, the current-limit comparator is disabled and cannot switch off the gate driver.Constant Output Power LimitWhen the SENSE voltage across the sense resistor, R S , reaches the threshold voltage (around 1V), theThe sensed voltage across the current-sense resistor is used for current-mode control and pulse-by-pulse current limiting. Built-in slope compensation improves stability and prevents sub-harmonic oscillations due to peak-current mode control. The SG6859A has asynchronized, positively-sloped ramp built-in at each switching cycle. The slope of the ramp is: Duty(max.)Duty 0.36× (2)Noise ImmunityNoise from the current sense or the control signal can cause significant pulse-width jitter, particularly in continuous-conduction mode (CCM). While slope compensation helps alleviate these problems, further precautions should still be taken. Good placement and layout practices should be followed. Avoiding long PCB traces and component leads, locating compensation and filter components near the SG6859A, and increasing power MOS gate resistance improve performance.CY1 (Optional) YC 1nF/400V (Y1) R1,R2 R 750KΩ 120647KΩ 1206R 10nF/500V R3,R4C1 CC10μF/400V 105°C R5 R 47Ω 1206C2 ECC3 CC 1nF/500V R6 R 4.7Ω 1206C4 EC10μF/50V R7 R 100Ω 0805C6 CC 4.7nF 0805 R8 R 10Ω 1206C7 (Optional) CC 1nF/100V 1206 R9 R 100KΩ 0805C8 EC470μF/10V 105°C R10 (Optional) R 10Ω 1206220μF/10V 105°C R11 R 100Ω 1/8WC9 ECA) THIS PACKAGE CONFORMS TOJEDEC MS-001 VARIATION BAB) ALL DIMENSIONS ARE IN MILLIMETERS.C) DIMENSIONS ARE EXCLUSIVE OF BURRS,MOLD FLASH, AND TIE BAR EXTRUSIONS.D) DIMENSIONS AND TOLERANC ES PERASME Y14.5M-1994E) DRAWING FILENAME AND REVSION: MKT-N08FREV2.Figure 17. 8-Pin, Dual Inline Package (DIP)。