RGF3AB中文资料

合集下载

B3F中文资料

B3F中文资料

B3F-1jjj, -3jjj
B3F-4jjj, -5jjj, -9jjj
OF: 260 gf
OF: 150 gf
OF: 130 gf
Forward Current Derating Curve
Operating force (gf) Operating force (gf) Forward current (mA)
Switching capacity Insulation voltage
5 to 24 VDC, 1 to 50 mA (resistive load) 30 VDC
Characteristics
Contact form Contact resistance Insulation resistance Dielectric strength Bounce time Vibration resistance Shock resistance Life expectancy
1.27±0.49 N (130±50 gf)
2.55±0.69 N (260±70 gf)
0.29 N (30 gf)
0.49 N (50 gf)
0.3+0.2/–0.1 mm
元器件交易网
Engineering Data
Operating Force vs. Stroke (Typical)
元器件交易网
Mechanical Key Switch
A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force.
Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting to PCBs. Up to 2.55 N (260-gf) operating force for a firmer operating touch. Pushbuttons available in nine colors.

S3F9498中文资料

S3F9498中文资料
元器件交易网Leabharlann S3C9498/F9498
8-BIT CMOS MICROCONTROLLER USER'S MANUAL Revision 1
元器件交易网
Important Notice
The information in this publication has been carefully checked and is believed to be entirely accurate at the time of publication. Samsung assumes no responsibility, however, for possible errors or omissions, or for any consequences resulting from the use of the information contained herein. Samsung reserves the right to make changes in its products or product specifications with the intent to improve function or design at any time and without notice and is not required to update this documentation to reflect such changes. This publication does not convey to a purchaser of semiconductor devices described herein any license under the patent rights of Samsung or others. Samsung makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Samsung assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation any consequential or incidental damages. S3C9498/F9498 8-Bit CMOS Microcontroller User's Manual, Revision 1 Publication Number: 21-S3-C9498/F9498-102004 © 2004 Samsung Electronics All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of Samsung Electronics. Samsung Electronics' microcontroller business has been awarded full ISO-14001 certification (BVQ1 Certificate No. 9330). All semiconductor products are designed and manufactured in accordance with the highest quality standards and objectives. Samsung Electronics Co., Ltd. San #24 Nongseo-Ri, Giheung- Eup Yongin-City, Gyeonggi-Do, Korea C.P.O. Box #37, Suwon 449-900 TEL: FAX: (82)-(031)-209-1934 (82) (331) 209-1889 "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by the customer's technical experts. Samsung products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, for other applications intended to support or sustain life, or for any other application in which the failure of the Samsung product could create a situation where personal injury or death may occur. Should the Buyer purchase or use a Samsung product for any such unintended or unauthorized application, the Buyer shall indemnify and hold Samsung and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly or indirectly, any claim of personal injury or death that may be associated with such unintended or unauthorized use, even if such claim alleges that Samsung was negligent regarding the design or manufacture of said product.

C8051F330中文资料

C8051F330中文资料

(2)IO: IO 信号输出控制程序。 (3)Keyled: 键盘读取及 LED 数码管显示程序。 (4)IIC_EEPROM: IIC 接口 EEPROM(AT24C02A, 容量256字节)读写程序。 (5)IIC_RTC: IIC 接口实时时钟(PCF8563)读写程序。 (6)PWM: PWM 信号输出控制程序。 (7)RS232: RS232串行数据通信程序。 (8)ADC_Uart: ADC 采样转换及计算程序。 (9)ADC_display: ADC 采样转换及数据处理数码管显示。 (10)DAC: DAC 转换及计算程序。 (11)Timer: Timer2、Timer3计时程序。 (12)INT0: 外部中断0测试程序。 (13)bootloader: 如果 C8051F330内部 bootloader 程序不慎被擦除,可应用 C8051F 网络生产的 EC3将 bootloader.hex 程序下载到芯片中。
时钟源 − 两个内部振荡器:
24.5MHz,±2%的精度,可支持无晶体 UART 操作 80/40/20/10 kHz 低频率、低功耗振荡器 − 外部振荡器:晶体、RC、C、或外部时钟 − 可在运行中切换时钟源,适用于节电方式 封装:20脚 MLP
性能最好,价格最低的 C8051F 单片机学习板 c8051f 单片机应用解析之 c8051f330 内容:
3.本学习板主要特点 (1)选择与 MCS51单片机兼容高性能的混合信号处理器 C8051F330作为控制芯片。 (2)可以不使用仿真器(EC3)就可以进行软件下载调试,节约开发费用。 (3)编写了完善的软件例程,基本覆盖了 C8051F330单片机的所有功能。
4.学习板软件例程 (1)Delay: 软件延时程序,利用软件进行延时操作。

夏普複合機 MX-3114N MX-2614N MX-2314N MX-2010U MX-M

夏普複合機 MX-3114N  MX-2614N  MX-2314N  MX-2010U  MX-M

10
Copy 影印 - Special Modes 其他功能
Pamphlet Copy 書冊影印
Arrange copies into an attractive
booklet or pamphlet 此功能可影印並摺疊成書冊,如有 安裝中央釘裝分頁機,可自動釘裝 摺成書冊
Multi Shot 多頁合併
Select the desired action
選擇所需操作
7
Copy 影印
You can always save frequently used settings for quick access 您可以選擇儲存常用選項為捷徑
Tap Program Registration
點擊[程式登錄]
9
Copy 影印 - Special Modes 其他功能
Erase 消除週邊陰影
Tap the desired erase mode and
select one of the 4 erase modes 此功能可消除書脊或較厚原稿 週邊的陰影
Dual Page Copy 雙頁影印
Produces separate copies of two
altering the number inside the box 設定每檔指定頁面方便掃描大量文件
Destination 傳送位址
Tap Address Book to select desti-
nation 從[位址目錄]選取目的地
Drag or tap the navigation bar to
Modes (Page 1) 點擊[特殊功能]以使用更多 功能 (第一頁)
Please go to P.9 for more infor-

ATF33143中文资料

ATF33143中文资料
120 100 80
Cpk = 2.3 Std = 0.2
80
60
-3 Std
+3 Std
60
-3 Std
+3 Std
40
40
20
20
0 29
31
33 OIP3 (dBm)
35
37
0 13
14
15 GAIN (dB)
16
17
Figure 3. OIP3 @ 2 GHz, 4 V, 80 mA. LSL=30.0, Nominal=33.3, USL=37.0
test requirements. Circuit losses have been de-embedded from actual measurements. 10. The probability of a parameter being between ±1σ is 68.3%, between ±2σ is 95.4% and between ±3σ is 99.7%.
0.3
0.4
0.5 NF (dB)
0.6
0.7
0.8
Figure 1. Typical Pulsed I-V Curves [7]. (VGS = -0.2 V per step)
100 Cpk = 1.21 Std = 0.94
Figure 2. NF @ 2 GHz, 4 V, 80 mA. LSL=0.2, Nominal=0.53, USL=0.8
Applications
• Low Noise Amplifier and Driver Amplifier for Cellular/PCS Base Stations • LNA for WLAN, WLL/RLL, LEO, and MMDS Applications • General Purpose Discrete PHEMT for Other Ultra Low Noise Applications

MP24833真正中文版

MP24833真正中文版

描述MP24833 是 55V,3A白光 LED 驱动器适用于降压,反相升/降压和升压应用。

它具有 3A输出电流在较宽的输入电压范围内具有优异的负载和线性调整。

电流模式能提供快速的瞬态响应和环路稳定性设计。

故障保护包括热关断,逐周期峰值电流限制,开弦保护和输出短路保护。

MP24833 采用模拟和PWM调光复用一个控制引脚。

单独的输入参考接地引脚可以直接使能芯片或者调光控制为正的负功率转换。

MP24833需要最少的标准外部元件和采用SOIC8E 封装。

特点•3A 最大输出电流•独特的升降压操作 (降压-升压模式)•宽输入电压范围:4.5V~55V(降压模式)•0.19Ω 内部功率MOSFET开关•开关频率:200KHz•模拟和PWM调光•0.198V 参考电压•6μA 关断模式•无LED最小数量•稳定低ESR陶瓷输出电容器•逐周期过流保护•热关断保护•开弦保护•输出短路保护•封装: SOIC8E应用•常规 LED 照明•LCD背光板•笔记本电脑•汽车内部照明•便携式多媒体播放器•便携式 GPS 设备For MPS green status, please visit MPS website under Quality Assurance.“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc.MP24833A, 55V3白光LED驱动器The Future of Analog IC Technology绝对最大额定值 (1)供应电压 V DD - V SS .............................................. 60V V SW - V SS ......................................-0.3V to V IN + 0.3V V BST .............................................................V SW + 6V V EN/Dim - V INGND ..........................................-0.3Vto+6V V INGND - V SS ............................................-0.3V to 60V 其他引脚 - V SS ….....................................-0.3V to +6V 连续功率耗散(T A= +25°C) (2)SOIC8E..............................................................2.5W 结温……………………....................................150°C 铅温度………………….....................................260°C 贮存温度……………..................-65°C to +150°C推荐的操作条件 (3)供应电压 V DD - V SS ..................................4.5V to 55VJ C热阻 (4) θJA θJCSOIC-8 EP ..............................50 ......10...°C/W备注:1) 超过绝对最大额定值可能会损坏芯片.2) 最大允许功率耗散是一个函数的最大结温T J (MAX), 结到环境热阻 θJA , 和 环境温度 T A . 在任何环境温度的最大允许连续功率耗散计算由P D (MAX) = (T J (MAX)-T A )/θJA . 超过最大允许功耗 会导致过高的模具温度, 同时芯片将进入热关断.对内部热关断电路造成永久性的损坏.3) 芯片不能保证在推荐的工作条件以外的情况下正常工作. 4) 测试是在 JESD51-7, 4-layer PCB.定购信息引脚配置4.5V V IN 55V5) 保证所设计的.典型性能特征性能波形测试在评估板的设计示例部分. V IN = 36V, I LED = 1A, 7个WLEDs 串联, L = 68µH, T A = 25°C, 降压应用,除非另有说明.典型的性能特征(续)性能波形测试在评估板的设计示例部分. V IN = 24V, I LED = 1A, 7个WLEDs 串联, L = 68µH, T A = 25°C, 降压升压应用, 考阅 INGND, 除非另有说明.引脚功能功能方框图图1: 功能框图操作MP24833是一个电流型调节器,误差放大器 (EA) 的输出电压与峰值电感电流成正比。

PF3WB PF3WC PF3WS PF3WR数字流量开关-多功能型说明书

PF3WB PF3WC PF3WS PF3WR数字流量开关-多功能型说明书

Page 1 of 3Instruction ManualDigital Flow Switch – Manifold type PF3WB / PF3WC PF3WS / PF3WRThe intended use of thedigital flow switch manifoldis to monitor and adjust fluid flow to a device while connected to the IO-Link protocol.These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.”They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC) *1), and other safety regulations. *1)ISO 4414: Pneumatic fluid power - General rules relating to systems. ISO 4413: Hydraulic fluid power - General rules relating to systems.IEC 60204-1: Safety of machinery - Electrical equipment of machines. (Part 1: General requirements)ISO 10218-1: Manipulating industrial robots -Safety. etc.• Refer to product catalogue, Operation Manual and Handling Precautions for SMC Products for additional information. • Keep this manual in a safe place for future reference.CautionCaution indicates a hazard with a low level of risk which, ifnot avoided, could result in minor or moderate injury.WarningWarning indicates a hazard with a medium level of riskwhich, if not avoided, could result in death or serious injury.DangerDanger indicates a hazard with a high level of risk which, ifnot avoided, will result in death or serious injury.Warning• Always ensure compliance with relevant safety laws and standards.• All work must be carried out in a safe manner by a qualified person in compliance with applicable national regulations.• This product is class A equipment intended for use in an industrial environment. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted or radiated disturbances.• Refer to the operation manuals on the SMC website (URL: https:// ) for more safety instructions.Warning• Special products (-X) might have specifications different from those shown in the following section. Contact SMC for specific drawings.2 Specifications2.1 Manifold Common Specifications2.2 IO-Link specifications (for PF3W7##-L flow switch)• Refer to the PF3WB Operation Manual and the Operation Manual for the PF3W7, PF3W7-L or PF3W5 series on the SMC website (URL: https:// ) for more Specification details.3.1 PF3WB type ManifoldPart DescriptionSupply(Supply unit)This unit supplies the fluid from the supply side main piping to the application.Flow adjustment valve and stop valve can be combined to comprise the equipment.• The supply unit is not suitable for a flow switch. Return(Return unit)This unit returns the fluid exhausted from the application.Flow adjustment valve and stop valve can be combined to comprise the equipment.Flow switch The flow switch displays or outputs the flow rate when flow is applied.• Applicable to integrated display type / remote sensor type (temperature sensor type can be selected).• IO-Link compatible (Integrated display type PF3W7##-L only).• Cannot be used for the supply unit.Display The integrated display type displays flow rate, set value and error codes.The remote type displays POWER indicator and FLOW indicator.For display, refer to the Operation Manual.(Display integrated type: PF3W7, remote sensor type sensor: PF3W5)Connector This is for connecting the lead wire.PartDescriptionLead wire with M8 connectorLead wire to supply power to and obtain output signals from the flow switchFlow adjustment valveOrifice mechanism to adjust the flow rate.• The flow adjustment valve is not suitable for applications which require constant adjustment of flow rate.• This valve is not suitable for stopping the flow. • Applicable to both the supply and return unit. Flow adjustment knob This knob is for adjusting the flow rate. Lock ringThis is used for holding the flow adjustment valve.Stop valveThis is the mechanism for stopping the flow rate. ∗: Not suitable for adjusting the flow rate. ∗: Applicable to supply/return unit.Stop valve handleThis handle is for stopping the flow rate. When the handle is rotated by 90°, it is possible to stop the flow rate.AttachmentTo connect the piping of the supply/return units. Main pipingTo connect the piping of the manifold body. Open or close cannot be selected.• PF3WC series is not applicable to “Close”. • It is not possible to change the main piping after ordering.ORIGINAL INSTRUCTIONSModel PF3WBPF3WCPF3WSPF3WRManifold specifications Integrated type Remote type Arrangement 1 to 10 stationSupply or Return: 1 to 5 station1 to 10 station1 to 10 stationU n i t Rated flow range 0.5 to 4 L/min, 2 to 16 L/min, 5 to 40 L/min Supply unit construction With flow adjustment valve / stop valve- Return unit construction Flow switch,flow adjustment valve,stop valve-Flow switch, adjustment valve, stop valveF l u i d Applicable fluid Water and ethylene glycol solution with aviscosity of 3 mPa •s(3 cP) or less Fluid temp. 0 to 90 o C (No freezing and condensation)P r e s s u r e Operating pressure range 0 to 1 MPa Proof pressure 1.5 MPaPressure loss Refer to graph for pressure lossE n v i r o n m e n tEnclosure IP65Operating temp. range 0 to 50 oC (No freezing and condensation)Operating humidity range Operation, Storage: 85%R.H. (No condensation)Materials in contact with fluidPPS, SUS304, FKMGrease free P i p i n g p o r tMain piping 1 inch Attachments 3/8, 1/2, 3/4 inch•The PF3WB type manifold is shown .The individual parts of the PF3WC, PF3WS and PF3WR are the same.4.1 InstallationWarning•Do not install the product unless the safety instructions havebeen read and understood.•Use the product within the specified operating pressure andtemperature range.•Tighten to the specified tightening torque.If the tightening torque is exceeded the mounting screws, brackets andthe product can be broken. Insufficient torque can cause displacementof the product from its correct position.•Do not drop, hit or apply excessive shock to the product.Otherwise damage to the internal parts can result, causing malfunction.•Do not pull the lead wire forcefully, and do not lift the product bypulling the lead wire (tensile force 49 N or less).4.2 EnvironmentWarning•Do not use in an environment where corrosive gases, chemicals, saltwater or steam are present.•Do not use in an explosive atmosphere.•Do not expose to direct sunlight. Use a suitable protective cover.•Do not install in a location subject to vibration or impact in excess ofthe product’s specifications.•Do not mount in a location exposed to radiant heat that would result intemperatures in excess of the product’s specifications.•Do not use the product in places where there are cyclic temperaturechanges.Heat cycles other than ordinary changes in temperature can adverselyaffect the inside of the product.4.3 Mounting•Never mount the product in a location where it will be used as a support.•Mount the product so that the fluid flows in the direction indicated bythe arrow on the product label or on the product body.•Check the flow characteristics data for pressure loss and the straightinlet pipe length effect on accuracy, to determine inlet pipingrequirements.•Do not sharply reduce the piping size.•The monitor with integrated display can be rotated. It can be set at 90ointervals clock and anticlockwise, and also at 45o and 225o clockwise.Rotating the display with excessive force will damage the end stop.•When a stop valve is mounted, rotate the monitor after closing the stopvalve handle.Rotating the monitor with excessive force with the stop valve open, themonitor and stop valve will interfere with each other, causing damage(refer to the figure below).4.4 Direct mounting (PF3W704 / 720 / 740)•When mounting the product, mount it to a panel with screws(equivalent to M6) using the mounting holes provided.•Mounting plate thickness should be approximately 3 mm.•Screws and nuts must be prepared by the user.The PF3WB uses 6 mounting screws, and the PF3WC, PF3WS and4.5 PipingCaution•Before connecting piping make sure to clean up chips, cutting oil, dustetc.•When installing piping or fittings, ensure sealant material does notenter inside the port.•Eliminate any dust left in the piping using an air blow before connectingthe piping to the product.•Ensure there is no leakage after piping.•When connecting piping to the product, hold the piping with a wrenchon the metal part of the piping (piping attachment) and main port of themain piping, which is integrated into the piping.•Using a spanner on other parts may damage the product.In particular, do not let the spanner come into contact with the M8connector. The connector can be easily damaged.After hand tightening, apply a spanner of the correct size to thespanner flats on the product, and tighten it for 2 to 3 rotations, to thetightening torque shown in the table below.If the tightening torque is exceeded, the product can be damaged. Ifthe correct tightening torque is not applied, the fittings may becomeloose.Nominal Thread size Tightening torque Width across flatsRc (NPT) 3/8 15 to 20 N•m 20.9 mmRc (NPT) 1/2 20 to 25 N•m 23.9 mmRc (NPT) 3/4 28 to 30 N•m 29.9 mmRc (NPT) 1 36 to 38 N•m 41.0 mm4.6 WiringCaution•Do not perform wiring while the power is on.•Confirm proper insulation of wiring.Poor insulation (interference from another circuit, poor insulationbetween terminals, etc.) can lead to excess voltage or current beingapplied to the product, causing damage.•Do not route wires and cables together with power or high voltagecables.Otherwise the product can malfunction due to interference of noise andsurge voltage from power and high voltage cables to the signal line.Route the wires (piping) of the product separately from power or highvoltage cables.•Keep wiring as short as possible to prevent interference fromelectromagnetic noise and surge voltage.Do not use a cable longer than 30 m. (IO-Link compatible device: 20m or less).•Ensure that the FG terminal is connected to ground when using acommercially available switch-mode power supply.•When an analogue output is used, install a noise filter (line noise filter,ferrite element, etc.) between the switch-mode power supply and thisproduct.4.7 Connector Wiring5 SettingsRefer to the Operation manuals on the SMC website(URL: https://) for the following Settings:Flow switch Setting and Function setting•Integrated display type: PF3W7•Integrated display type (IO-Link compatible): PF3W7-L•Remote type sensor: PF3W56.1 General MaintenanceCaution•Not following proper maintenance procedures could cause the productto malfunction and lead to equipment damage.•If handled improperly, compressed air can be dangerous.•Maintenance of pneumatic systems should be performed only byqualified personnel.•Before performing maintenance, turn off the power supply and be sureto cut off the supply pressure. Confirm that the air is released toatmosphere.•After installation and maintenance, apply operating pressure andpower to the equipment and perform appropriate functional andleakage tests to make sure the equipment is installed correctly.•If any electrical connections are disturbed during maintenance, ensurethey are reconnected correctly and safety checks are carried out asrequired to ensure continued compliance with applicable nationalregulations.•Do not make any modification to the product.•Do not disassemble the product, unless required by installation ormaintenance instructions.•How to reset the product after a power cut or when the power hasbeen unexpectedly removedWhen the flow switch is the integrated display type, the settings of theproduct are retained from before the power cut or de-energizing.The output condition also recovers to that before the power cut or de-energizing, but may change depending on the operating environment.Therefore, check the safety of the whole system before operating theproduct.7 Troubleshooting7.1 Error indication (PF3W7 Integrated display type)When using PF3W7 integrated display or PF3W5 remote sensorWhen PF3W7-L (IO-Link) is used in SIO modeNo. Name Wire colour Function1 DC(+) Brown 12 to 24 VDC2 N.C./ OUT2 White N.C. / Switch output 2 (SIO)3 DC(-) Blue 0 V4 OUT1 Black Switch output 1 (SIO)When PF3W7-L (IO-Link) is used as IO-Link deviceNo. Name Wire colour Function1 L+ Brown 18 to 30 VDC2 N.C./ OUT2 White N.C. / Switch output 2 (SIO)3 L-Blue 0 V4 C/Q BlackIO-Link data /Switch output 1 (SIO)∗: Wire colours are for the lead wire included with the PF3W7 series.Page 3 of 37.2 Error indication (PF3W5 Remote sensor type) If the error cannot be reset after the above measures are taken, or errors other than the above are displayed, please contact SMC.Refer to the Operation manual on the SMC website (URL: https:// ) for more detailed information about Troubleshooting.8 How to OrderRefer to the operation manual or catalogue on the SMC website (URL: https:// ) for How to order information.9 Outline Dimensions (mm)Refer to the Operation manual on the SMC website (URL: https:// ) for outline and mounting dimensions for the PF3WB, PF3WC, PF3WS and PF3WR.10.1 Limited warranty and Disclaimer/Compliance Requirements Refer to Handling Precautions for SMC Products.11 Product disposalThis product should not be disposed of as municipal waste. Check your local regulations and guidelines to dispose of this product correctly, in order to reduce the impact on human health and the environment.12 ContactsRefer to or www.smc.eu for your local distributor / importer.URL: https:// (Global) https:// (Europe) SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, Japan Specifications are subject to change without prior notice from the manufacturer. © 2021 SMC Corporation All Rights Reserved. Template DKP50047-F-085M。

RBK753 全家型三带无线网6系统说明书

RBK753 全家型三带无线网6系统说明书

Data SheetRBK753Whole Home Tri-band Mesh WiFi 6 SystemOverviewBreak free from limitations with strong,reliable, and lightning fast WiFi in every room of your home. From the top floor down to the basement, Orbi Tri-band Mesh WiFi 6 Systems bring you higher performance & simultaneous WiFi streaming, gaming & browsing on even more devices. This system includes NETGEAR Armor ™, advanced cyber security for your connected devices.Robust smart home WiFi.FeaturesCutting Edge Performance.Get the ultimate experience with 8 Streams of WiFi 6 a nd speeds up to 4.2Gbps.† Enjoy 4K/8K UHD streaming, l ag-free gaming & smooth streaming.It’s Easy.Enjoying your WiFi has never been easier. With the Orbi app, s et up your WiFi, customize your settings & enjoy your new O rbi WiFi in minutes.Gigabit Speeds Where You Need Them.Don’t let your home be a maze of dead zones. Get consistent speeds everywhere with Tri-band dedicated wireless backhaul & 8 Gigabit Ethernet ports.Cybersecurity With NETGEAR Armor ™.Protect your connected home devices from Internet threats with best-in-class anti-virus, anti-malware & data protection.1More Capacity, More Battery Life.Don’t be held back by limited capacity. Enjoy more devices simultaneously with 4X the capacity than before & improvedefficiency for longer battery life.Manage Your Kids’ Screen Time.NETGEAR Smart Parental Controls ™ let you easily manage your kids’ time online across their connected devices.2Data Sheet RBK753Whole Home Tri-band Mesh WiFi 6 SystemHouse DiagramRobustSmart Home ExperienceBuilt for Gigabit Internet Speeds EverywhereYou’ve paid for the fastest Internet speeds, now experience it everywhere in your home.Orbi AppUse the Orbi app to setup and manage your Orbi WiFi.NETGEAR Armor empowers you to eliminatevulnerabilities or simply know the status of your home network and devices, anytime, anywhere. Get instant notifications when malicious threats are detected, block unknown devices from joining your Orbi home network or take action on vulnerabilities as they are discovered easily through the Orbi App.Data SheetRBK753 Whole Home Tri-band Mesh WiFi 6 SystemOrbi Router (RBR750)Orbi Satellite (RBS750)Data Sheet RBK753Whole Home Tri-band Mesh WiFi 6 SystemWhat’s In the Box?• One (1) Orbi Router (RBR750)• Two (2) Orbi Satellites (RBS750)• One (1) 2m Ethernet cable• Three (3) 12V/2.5A power adapters • Quick start guideWhat Do I Need for Orbi to Work?• High-speed Internet connection• Connect to existing modem or gatewayTechnical Specifications• O rbi AX4200 Router & AX4200 Satellites (600 + 1200 + 2400Mbps)†• Simultaneous Tri-band WiFi - R adio 1: IEEE ® 802.11b/g/n/ax2.4GHz—1024-QAM support - R adio 2: IEEE ® 802.11a/n/ac/ax5GHz—1024-QAM support - R adio 3: IEEE ® 802.11a/n/ac/ax5GHz—1024-QAM supportPhysical Specifications• Dimensions: 9.1 x 7.2 x 2.8 in each • Weight: 1.9 lb eachSoftware Features• Orbi Mobile App• M U-MIMO capable for simultaneous data streaming • I mplicit & Explicit Beamforming for 2.4GHz & 5GHz bands• Processor - Router & Satellite - P owerful quad-core 1.4GHz processor • Memory – Router - 512MB NAND flash and 1GB RAM • Antenna – Router & Satellite (each) - S ix (6) high-performance internal antennas withhigh-power amplifiers • Ports – Orbi Router - T hree (3) 10/100/1000Mbps Gigabit EthernetLAN ports - O ne (1) 1Gbps Gigabit Ethernet WAN port • Ports – Orbi Satellite (each) - T wo (2) 10/100/1000Mbps Gigabit EthernetLAN ports • L ink aggregation using WAN port and a Gigabit Ethernet port • Security - C omprehensive anti-virus & data theftprotection for your PC, Mac ® and mobile devices with NETGEAR Armor ™-S tandards-based WiFi Security(802.11i, 128-bit AES encryption with PSK) - G uest WiFi Network is easy to setup separate &secure Internet access for guests • Voice Control - A mazon Alexa ™- The Google © Assistant • N ETGEAR Smart Parental Controls ™ — Manage your kids’ time online across their connected devices. Learn more at /spcThis product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller. /warranty *90-day complimentary technical support following purchase from a NETGEAR authorized reseller.‡Maximum wireless signal rate derived from IEEE 802.11 specifications. Actual data throughput and wireless coverage will vary and be lowered by network and environmental conditions, including network traffic volume, device limitations, and building construction. NETGEAR makes no representations or warranties about this product’s compatibility with future standards. Up to 4,200Mbps wireless speeds achieved when connecting to other 802.11ax 4,200Mbps devices. 1NETGEAR Armor ™ is free during the trial period. A yearly subscription, after the trial period, protects your connected devices. Visit /armor 2NETGEAR Smart Parental Controls™ fees apply for a Premium Plan. Visit /spc for more information. For regulatory compliance information, visit /about/regulatory For indoor use only.NETGEAR, the NETGEAR Logo, NETGEAR Armor, NETGEAR Smart Parental Controls, and Orbi are trademarks of NETGEAR, Inc. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC. Any other trademarks mentioned herein are for reference purposes only. © 2021 NETGEAR, Inc. NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, /supportD-RBK753-3。

液晶模块G320240A(RA8835)附程序

液晶模块G320240A(RA8835)附程序

一:模块命名规则PART NUMBER: HP-AB..BC-D-EFGHIJ-KLHPA DISPLAY CONTENTS C---CHARACTER TYPE(字符型)G---GRAPHIC TYPE (点阵型)B…B SERIALS NUMBER FOR SM CHARACTERS Vs. LINES FOR CM(字符数VS行数)COLUMNS Vs. ROWS FOR GM(列VS行)C VERSION OF PCB(PCB版本号)D DIFFERENT TYPE OF THE SAME PART(修改版本)E LCD TYPE:P---POS. TN, N---NEG. FSTN, Y---YELLOW STN, G---GRAY STNB---BLUE STN, F---FSTN POSITVEF POLARIZER TYPE(偏光片类型)R---REFLECTIVE(反射), F---TRANSFLECTIVE(半透), T---TRANSMISSIVE(全透)G VIEWING ANGLE 6---6 O’CLOCK, 0---12 O’CLOCK,3---3 O’CLOCKH OPERATING TEMPRETURE N---NORMAL, E---EXTENDEDI BACKLIGHT TYPE: N---NO BACKLIGHT, D---BOTTOM LED, S---SIDE LED,J COLOR OF BACKLIGHT Y---YELLOW/GREEN, G---GREENW---WHITE, B---BLUE, A---AMBERKL FOR CM, CONTROLLER/DRIVER DESIGNATORJ: IC TYPEK: DENOTE DIFFERENT CHARACTER TABLEFOR GM. J: BACKLIGHT DRIVER Y---WITH, N---WITHOUTK: DC-DC CONVERTER Y---WITH, N---WITHOUTFOR EXAMPLE: HP-C2001A-1-YF6EDY-B0HPC CHARACTER TYPE(字符型)2001 20 CHARACTER PER LINES 1 ROWS (每行20个字符,共1行)A A VERSION OF PCB(PCB为A版本)1 THE FIRST TYPE (第一次修改)Y LCD TYPE IS YELLOW/GREEN STN(液晶屏的颜色为黄绿色)F POLARIZER TYPE IS TRANSFLECTIVE(液晶的偏光片为半透型)6 VIEWING ANGLE IS 6 O’CLOCK(液晶的视角为6点钟视角)E EXTENDED TEMPRETURE (操作温度为宽温型)D BACKLIGHT TYPE BOTTOM LEDE LED (背光类型为:底背光)Y COLOR OF BACKLIGHT Y---YELLOW/GREEN (背光颜色为黄绿色)B0 B: CONTROL IC TYPE IS SUNPLUS(控制IC为凌阳)K: DENOTE CHARACTER TABLE IS 00(IC的字库为CODE 00)时序说明 at Ta = 25 deg C, Vdd = 5V+/-10%, Vss =0V项目符号最小值最大值单位地址延时时间Tah8 13 - ns 地址上升时间Taw8 5 - ns 系统循环时间Tcyc8 (*2)- ns 存储脉冲建立时间Tcc8 190 - ns 数据保持时间Tdh8 7 - ns 数据建立时间Tds8 190 ns 数据稳态时间Tacc8 13 - ns时序说明at Ta = 25 deg C, Vdd = 3.3V+/-10%, Vss =0V项目符号最小值最大值单位地址延时时间Tah8 13 - ns 地址上升时间Taw8 5 - ns 系统循环时间Tcyc8 (*2)- ns 存储脉冲建立时间Tcc8 150 - ns 数据保持时间Tdh8 7 - ns 数据建立时间Tds8 150 ns 数据稳态时间Tacc8 7 - ns 说明:*1. 输入信号的上升/下降时间不应该小于20 NS*2. 对于存储控制和系统控制指令:tcyc8=2tc+Tcea+75>tacv+245*3. 对于所有其他的指令:tcyc8=4tc+tcc8+30*4. 关于详细的说明请参考RA8835的数据手册(2)6800 时序时序说明 at Ta = 25 deg C, Vdd = 5V+/-10%, Vss =0V项目符号最小值最大值单位地址延时时间Tah6 13 - ns 地址上升时间Taw6 5 - ns 系统循环时间Tcyc6 (*2)- ns 存储脉冲建立时间Tcc6 190 - ns 数据保持时间Tdh6 5 - ns 数据建立时间Tds6 125 ns 数据稳态时间Tacc6 13 - nsTIMING SPECIFICATIONS at Ta = 25 deg C, Vdd = 3.3V+/-10%, Vss =0V项目符号最小值最大值单位地址延时时间Tah6 5 - ns 地址上升时间Taw6 13 95 ns 系统循环时间Tcyc6 (*2)- ns 存储脉冲建立时间Tcc6 150 - ns 数据保持时间Tdh6 5 - ns 数据建立时间Tds6 150 ns 数据稳态时间Tacc6 - 165 ns NOTE:*1. 输入信号的上升/下降时间不应该小于20 NS*2. 对于存储控制和系统控制指令:tcyc6=2tc+ Tew6+tcea+75>tacv+245*3. 对于所有其他的指令:tcyc8=4tc+tcc+30*4. 关于详细的说明请参考RA8835的数据手册(3)复位时序时序说明 at Ta = 25 deg C, Vdd = 5V+/-10%, Vss =0V项目符号最小值最大值单位复位脉冲Tres 1.0 - ms时序说明 at Ta = 25 deg C, Vdd = 3.3V+/-10%, Vss =0V项目符号最小值最大值单位复位脉冲Tres 1.0 - ms八:光电特性项目符号条件最小值典型值最大值单位参考.对比度CR 25℃-- 12 -- 备注1上升时间tr 25℃-- 160 240 ms 备注2下降时间tf 25℃-- 100 150 ms 备注 2参观视角θ1-θ225℃-- -- 60DEG 备注 3 Ø1, Ø2-40 -- 40帧频率Ff 25℃-- 70 -- Hz 备注 2 备注(1): 对比率是由以下条件决定的:CR= 选择情况的亮度非选择情况的亮度(a). 温度------------25C(b). 帧频率------64Hz。

新华龙电子 C8051F410 1 2 3 混合信号 ISP FLASH 微控制器 数据手册

新华龙电子 C8051F410 1 2 3 混合信号 ISP FLASH 微控制器 数据手册

C8051F410/1/2/3混合信号ISP FLASH微控制器数据手册潘琢金译Rev 0.7 2006.02版权所有新华龙电子有限公司 电话:0755-******** 83645242 传真: 0755-******** 1版权声明本手册中文版版权归译者和新华龙电子有限公司所有。

研究和开发人员可以自由使用本手册。

任何单位和个人未经版权所有者授权不得在任何形式的出版物中摘抄本手册内容。

原文中比较明显的错误已经在译文中更正。

译者将在本手册英文版更新后及时更新中文版内容。

译文中一定存在不少错误和不准确之处,望各位同仁不吝赐教,以便在新版本中更正。

译者联系方式:沈阳航空工业学院计算机学院潘琢金电话:024-********,130********Email:panzhuojin@或panzhj@2 新华龙电子有限公司 电话:0755-******** 83645242 传真: 0755-********C8051F410/1/2/3 混合信号ISP FLASH微控制器模拟外设−12位 ADC±1LSB INL;无失码可编程转换速率,最高200ksps可多达24个外部输入数据窗口中断发生器内建温度传感器−两个12位电流输出DAC−两个比较器可编程回差电压和响应时间可配置为唤醒或复位源上电复位/欠压检测器电压基准— 1.5V、2.2V(可编程)在片调试−片内调试电路提供全速、非侵入式的在系统调试(不需仿真器)−支持断点、单步、观察/修改存储器和寄存器−完全的开发套件供电电压 2.0V ~ 5.25V−内建LDO稳压器:2.1或2.5 V高速8051微控制器内核−流水线指令结构;70%的指令的执行时间为一个或两个系统时钟周期−速度可达50MIPS(时钟频率为50MHz时)−扩展的中断系统存储器−2304字节内部数据RAM(256+2048)−32/16KB FLASH;可在系统编程,扇区大小为512字节−64字节电池后备RAM(smaRTClock)数字外设−24个端口I/O;推挽或漏极开路,耐5.25 V电压−可同时使用的硬件SMBus(I2C兼容)、SPI和UART串口−4个通用16位计数器/定时器−16位可编程计数器/定时器阵列(PCA),有6个捕捉/比较模块和WDT−硬件实时时钟(smaRTClock),工作电压可低至1V,64字节电池后备RAM和后备稳压器时钟源−内部振荡器:24.5MHz,±2%精度,可支持UART操作;时钟乘法器可达50MHz−外部振荡器:晶体、RC、C、或外部时钟−smaRTClock振荡器:32KHz晶体或谐振器−可在运行中切换时钟源32脚LQFP或28脚5x5 QFN封装温度范围:-40°C - +85°C交叉开关新华龙电子有限公司 电话:0755-******** 83645242 传真: 0755-******** 1目录1 . 系统概述 (8)1.1CIP-51TM微控制器核 (12)1.1.1 与8051完全兼容 (12)1.1.2 速度提升 (12)1.1.3 增加的功能 (12)1.2片内调试电路 (13)1.3片内存储器 (14)1.4工作方式 (15)1.512位模/数转换器 (16)1.612位电流输出DAC (17)1.7可编程比较器 (17)1.8循环冗余检查单元 (18)1.9稳压器 (18)1.10串行端口 (18)1.11 SMA RTC LOCK(实时时钟) (19)1.12端口输入/输出 (20)1.13可编程计数器阵列 (21)2. 极限参数 (22)3. 总体直流电气特性 (23)4. 引脚和封装定义 (25)5. 12位ADC(ADC0) (33)5.1模拟多路选择器 (34)5.2温度传感器 (34)5.3工作方式 (35)5.3.1 转换启动方式 (35)5.3.2 跟踪方式 (35)5.3.3 时序 (36)5.3.4 跟踪方式 (38)5.3.5 输出转换码 (39)5.3.6 建立时间要求 (40)5.4可编程窗口检测器 (46)5.4.1窗口检测器 (47)6. 12位电流模式DAC(IDA0和IDA1) (50)6.1IDA0输出更新 (50)2 新华龙电子有限公司 电话: 0755-******** 83645242 传真: 0755-********6.1.1 On-Demand输出更新 (50)6.1.2 基于定时器溢出的输出更新模式 (51)6.1.3 基于CNVSTR边沿的输出更新模式 (51)6.2IDAC输出字格式 (51)6.3IDAC外部引脚连接 (55)7. 电压基准 (58)8. 稳压器(REG0) (61)9. 比较器 (63)10. CIP-51 微控制器 (73)10.1指令集 (74)10.1.1 指令和CPU时序 (74)10.1.2 MOVX指令和程序存储器 (74)10.2寄存器说明 (78)10.3电源管理方式 (81)10.3.1 空闲方式 (81)10.3.2 停机方式 (81)10.3.3 挂起方式 (81)11. 存储器组织和SFR (83)11.1程序存储器 (83)11.2数据存储器 (84)11.3通用寄存器 (84)11.4位寻址空间 (84)11.5堆栈 (84)11.6特殊功能寄存器 (85)12. 中断系统 (89)12.1MCU中断源和中断向量 (89)12.2中断优先级 (89)12.3中断响应时间 (89)12.4中断寄存器说明 (91)12.5外部中断 (96)13. 指令预取引擎 (98)14. 循环冗余检查单元(CRC0) (99)14.1CRC计算前的准备 (99)14.2执行CRC计算 (99)14.3访问CRC结果 (99)新华龙电子有限公司 电话:0755-******** 83645242 传真: 0755-******** 314.4CRC0的位反转功能 (100)15. 复位源 (103)15.1上电复位 (104)15.2掉电复位和VDD监视器 (105)15.3外部复位 (106)15.4时钟丢失检测器复位 (106)15.5比较器0复位 (106)15.6PCA看门狗定时器复位 (107)15.7FLASH错误复位 (107)15.8 SMA RTC LOCK(实时时钟)复位 (107)15.9软件复位 (107)16. FLASH存储器 (110)16.1FLASH存储器编程 (110)16.1.1 FLASH锁定和关键码功能 (110)16.1.2 FLASH擦除 (110)16.1.3 FLASH写 (111)16.2非易失性数据存储 (112)16.3安全选项 (112)16.4FLASH写和擦除指南 (115)16.4.1 VDD维护和VDD监视器 (115)16.4.2 PSWE维护 (116)16.4.3 系统时钟 (116)16.5FLASH读定时 (118)17.外部RAM (120)18. 端口输入/输出 (121)18.1 优先权交叉开关译码器 (122)18.2 端口I/O初始化 (125)18.3 通用端口I/O (129)19. 振荡器 (136)19.1可编程内部振荡器 (137)19.1.1 内部振荡器挂起方式 (137)19.2外部振荡器驱动电路 (139)19.2.1 外部振荡器直接用作定时器时钟 (139)19.2.2 外部晶体示例 (139)19.2.3 外部RC示例 (140)19.2.4 外部电容示例 (141)19.3时钟乘法器 (143)4 新华龙电子有限公司 电话: 0755-******** 83645242 传真: 0755-********19.4系统时钟选择 (145)20. SMARTCLOCK(实时时钟) (147)20.1 SMA RTC LOCK接口 (148)20.1.1 smaRTClock锁定和关键码功能 (148)20.1.2 使用RTC0ADR和RTC0DAT访问smaRTClock的内部寄存器 (148)20.1.3 smaRTClock接口的自动读功能 (149)20.1.4 RTC0ADR自动增1功能 (149)20.2 SMA RTC LOCK时钟源 (152)20.2.1 使用smaRTClock振荡器的晶体方式 (152)20.2.2 使用smaRTClock振荡器的自振荡方式 (152)20.2.3 自动增益控制(仅限于晶体方式) (153)20.2.4 smaRTClock偏置加倍 (153)20.2.5 smaRTClock时钟丢失检测器 (153)20.3 SMA RTC LOCK定时器和报警功能 (155)20.3.1 设置和读取smaRTClock定时器值 (155)20.3.2 设置smaRTClock报警值 (156)20.4后备稳压器和后备RAM (157)21. SMBUS (161)21.1支持文档 (162)21.2SMB US配置 (162)21.3SMB US操作 (163)21.3.1 总线仲裁 (163)21.3.2 时钟低电平扩展 (164)21.3.3 SCL低电平超时 (164)21.3.4 SCL高电平(SMBus空闲)超时 (164)21.4SMB US的使用 (164)21.4.1 SMBus配置寄存器 (165)21.4.2 SMBus控制寄存器 (168)21.4.3 数据寄存器 (171)21.5SMB US传输方式 (172)21.5.1 主发送器方式 (172)21.5.2 主接收器方式 (173)21.5.3 从接收器方式 (174)21.5.4 从发送器方式 (175)21.6SMB US状态译码 (176)22. UART0 (178)22.1增强的波特率发生器 (179)22.2工作方式 (181)新华龙电子有限公司 电话:0755-******** 83645242 传真: 0755-******** 522.2.1 8位UART (181)22.2.2 9位UART (182)22.3多机通信 (183)23. 增强型串行外设接口(SPI0) (188)23.1信号说明 (189)23.1.1 主输出、从输入(MOSI) (189)23.1.2 主输入、从输出(MISO) (189)23.1.3 串行时钟(SCK) (189)23.1.4 从选择(NSS) (189)23.2SPI0主方式 (191)23.3SPI0从方式 (192)23.4SPI0中断源 (192)23.5串行时钟时序 (193)23.6SPI特殊功能寄存器 (194)24. 定时器 (200)24.1定时器0和定时器1 (200)24.1.1 方式0 — 13位计数器/定时器 (200)24.1.2 方式1 (202)24.1.3 方式2 (202)24.1.4 方式3 (203)24.2定时器2 (208)24.2.1 16位自动重装载方式 (208)24.2.2 8位自动重装载定时器方式 (209)24.2.3 外部/smaRTClock捕捉方式 (210)24.3定时器3 (213)24.3.1 16位自动重装载方式 (213)24.3.2 8位自动重装载定时器方式 (214)24.3.3 外部/smaRTClock捕捉方式 (215)25. 可编程计数器阵列 (218)25.1PCA计数器/定时器 (219)25.2捕捉/比较模块 (221)25.2.1 边沿触发的捕捉方式 (222)25.2.2 软件定时器方式 (223)25.2.3 高速输出方式 (224)25.2.4 频率输出方式 (225)25.2.5 8位脉宽调制器方式 (226)25.2.6 16位脉宽调制器方式 (227)25.3看门狗定时器方式 (228)6 新华龙电子有限公司 电话: 0755-******** 83645242 传真: 0755-********25.3.1 看门狗定时器操作 (228)25.3.2 看门狗定时器的使用 (229)25.4PCA寄存器说明 (231)26. C2接口 (235)26.1C2接口寄存器 (235)26.2C2引脚共享 (237)新华龙电子有限公司 电话:0755-******** 83645242 传真: 0755-8364524371 . 系统概述C8051F41x器件是完全集成的低功耗混合信号片上系统型MCU。

f663nv3a参数

f663nv3a参数

f663nv3a参数F663NV3A是一款半导体MOS场效应管,是一种高性能的功率放大器。

1. 低导通电阻 - 特别适用于低电源电压应用,使得器件具有更高的效率;2. 高速开关能力 - 针对高频率和高效率应用进行了优化;3. 极低的输入电容 - 适用于高频应用,可以减少输入信号的失真;4. 集成了反极性保护二极管 - 提高了器件的稳定性。

F663NV3A的参数如下:1. 电流 - 最大5.5安培,连续电流应为3.5安培;2. 电压 - 最大60伏特,建议操作范围为20-50伏特;3. 功率 - 最大120瓦特,该功率取决于环境和散热装置;4. 导通电阻 - 典型值为0.14欧姆,最大值为0.18欧姆;5. 输出电容 - 典型值为100皮法,最大值为150皮法。

F663NV3A适用于各种不同的应用场合,包括音频功放、电源管理、电机控制以及高频应用等。

由于其高效率、高速度和可靠性,它经常被用于要求高度可靠的应用。

F663NV3A是一款通用型的半导体MOS场效应管,被广泛应用于高频、高效率和高可靠性的电路中。

其特点是具有低导通电阻、高速开关能力、极低的输入电容和反极性保护等功能。

该器件已经被广泛应用于多种不同类型的电路和应用中,如:音频功放、电源管理、电机控制、高频应用等。

F663NV3A的低导通电阻和高速开关能力使得它适用于高效率电路。

在电源管理电路中,我们通常需要使用MOSFET以控制电源的开/关状态,以保证电路稳定性和安全性。

与传统的BJT相比,MOSFET最大的特点是具有非常低的导通电阻,因此在高负载电路中它可以有效降低能量损耗。

F663NV3A的高速开关能力可以保证开关时的快速反应,从而提高了电路的稳定性和效率。

在音频功放电路中,F663NV3A的低输入电容可以降低输入信号的失真,从而提高整个音频信号的质量。

其反极性保护二极管功能可以充分保护电路的元器件不会受到反向电压的损坏。

这些都是非常重要的,可以确保音频功放的稳定性和可靠性。

SM-BF-3中文资料

SM-BF-3中文资料
元器件交易网
Adaptenuators
50Ω, 3,6,10 dB,
Features
• • • • • improved interface matching wideband, DC-2000 MHz, useable to 4 GHz excellent VSWR, 1.1:1 typ. excellent flatness, ±0.1 dB typ. rugged unibody construction
1.1 1.1 1.1
1.2 1.2 1.2
1.2 1.25 DJ866 1.2 1.25 DJ866 1.2 1.25 DJ866
19.95 19.95 19.95
NF-BF-3 NF-BF-6 NF-BF-10
N-Female N-Female N-Female
BNC-Fem BNC-Fem BNC-Fem
DC-2000 DC-2000 DC-2000
3±0.3 6±0.3 10±0.3
0.05 0.15 0.05 0.15 0.05 0.15
0.10 0.20 0.10 0.20 0.15 0.25
0.15 0.25 1.1 0.15 0.25 1.1 0.20 0.30 1.1
1.2 1.2 1.2
1.1 1.1 1.1
1.2 1.2 1.3
1.2 1.25 DJ868 1.2 1.25 DJ868 1.2 1.25 DJ868
19.95 19.95 19.95
* Flatness defined as peak to peak attenuation over band divided by 2
DC-2000 DC-2000 DC-2000

活体科技 3人员专用 3 Megapixel 综合能力 D N 适应型红外 LED 基本 WDR 变

活体科技 3人员专用 3 Megapixel 综合能力 D N 适应型红外 LED 基本 WDR 变
28 Kbps - 6 Mbps (per stream) Constant, Variable
Basic WDR (74 dB); White balance: automatic, hold, and manual; Brightness; Contrast; Sharpness (auto); Auto gain control; Digital noise reduction; Flickerless
4 configurable regions User defined text on video User defined image layer on video
Image flip and mirror
• Audio
Compression Audio-In Audio-Out
8 kHz, Mono, PCM, 16 bit encoding; G.711 Cable with 3.5mm phone jack Cable with 3.5mm phone jack
Microsoft Internet Explorer 8.0 or newer (full functionality); Safari with QuickTime installed, and other browsers with VLC installed (partial functionality)
• Interface
Digital Input Digital Output Local Storage
1, cable without connector 1, cable without connector MicroSDHC/MicroSDXC memory card slot (card not included)

E+H超声波液位计FMU30系列说明中文版

E+H超声波液位计FMU30系列说明中文版

操作手册Prosonic T FMU30超声波物位测量BA00387F/28/ZH/14.14简明操作指南Prosonic T2Endress+Hauser简明操作指南《操作手册》的内容《操作手册》介绍了Prosonic T 超声波物位变送器的安装和调试。

包含常规测量操作所需的所有功能参数。

此外,仪表还具有许多其他功能参数,例如:优化测量点和转换测量值。

这些功能参数未列举在本《操作手册》中。

仪表功能参数概述请参考“附录”章节。

仪表功能参数的详细说明请参考随箱CD 光盘中的《操作手册》BA00388F “Prosonic T -仪表功能描述”。

… …1003330A4unlock parameter 0A3resetProsonic T 目录Endress+Hauser3目录1安全指南 . . . . . . . . . . . . . . . . . . . . . . . 41.1 指定用途 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41.2 安装、调试和操作 . . . . . . . . . . . . . . . . . . . . . . . . 41.3 操作安全和过程安全 . . . . . . . . . . . . . . . . . . . . . . 41.4安全符号和图标说明 . . . . . . . . . . . . . . . . . . . . . . 52标识 . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.1 铭牌 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.2 产品选型表 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72.3 供货清单 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.4 证书和认证 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.5注册商标 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83安装 . . . . . . . . . . . . . . . . . . . . . . . . . . . 93.1 设计及外形尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . 93.2 安装方式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103.3 安装条件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113.4 测量范围 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143.5 安装提示 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153.6安装后检查 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154接线 . . . . . . . . . . . . . . . . . . . . . . . . . . 164.1 电气连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164.2 接线端子分配 . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.3 供电电压 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.4 电势平衡 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.5连接后检查 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185操作 . . . . . . . . . . . . . . . . . . . . . . . . . . 195.1 显示与操作单元 . . . . . . . . . . . . . . . . . . . . . . . . . 195.2 菜单号 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225.3 操作选项 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225.4 通过现场显示操作 . . . . . . . . . . . . . . . . . . . . . . . 235.5 通过FieldCare 操作 . . . . . . . . . . . . . . . . . . . . . . . 245.6 锁定/解锁设置 . . . . . . . . . . . . . . . . . . . . . . . . . 255.7 复位用户自定义参数 . . . . . . . . . . . . . . . . . . . . . 265.8复位干扰回波抑制(罐体抑制) . . . . . . . . . . . . . 266调试 . . . . . . . . . . . . . . . . . . . . . . . . . . 276.1 仪表上电 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276.2 基本标定 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286.3包络线 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 337故障排除 . . . . . . . . . . . . . . . . . . . . . . 367.1 系统错误信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . 367.2应用错误 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388维护和维修 . . . . . . . . . . . . . . . . . . . . 408.1 外部清洁 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408.2 维修 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408.3防爆型(Ex)设备的维修 . . . . . . . . . . . . . . . . . . . 408.4 更换 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408.5 备件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418.6 返厂 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428.7 废弃 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428.8 Endress+Hauser 的联系地址 . . . . . . . . . . . . . . . . 429 附件 . . . . . . . . . . . . . . . . . . . . . . . . . .439.1 安装支架 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439.2 螺纹法兰 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439.3 带安装支架或墙装支架的悬臂 . . . . . . . . . . . . . . 449.4 安装支架 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469.5 墙装支架 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469.6 Commubox FXA291 . . . . . . . . . . . . . . . . . . . . . . . 479.7 ToF 适配器FXA291 . . . . . . . . . . . . . . . . . . . . . . . 4710 技术参数 . . . . . . . . . . . . . . . . . . . . . . .4810.1 技术参数概述 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4811 附录 . . . . . . . . . . . . . . . . . . . . . . . . . .5211.1 操作菜单 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5211.2 测量原理 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56索引 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57安全指南Prosonic T1安全指南1.1指定用途Prosonic T是一体式测量仪表,用于连续、非接触式物位测量。

ADA-4643 Datasheet说明书

ADA-4643 Datasheet说明书

ADA-4643Silicon Bipolar Darlington Amplifi erData SheetAttention: Observe precautions forhandling electrostatic sensitive devices.ESD Machine Model (Class A)ESD Human Body Mode (Class 1B)Refer to Avago Application Note A004R:Electrostatic Discharge, Damage and Control.RFinGNDRFout & VdGND DescriptionAvago Technologies’ ADA-4643 is an economical, easy-to-use, general purpose silicon bipolar RFIC gain block am-plifi ers housed in a 4-lead SC-70 (SOT-343) surface mount plastic package which requires only half the board space of a SOT-143 package.The Darlington feedback structure provides inherent broad bandwidth performance, resulting in useful ope-rating frequency up to 2.5 GHz. This is an ideal device forsmall-signal gain cascades or IF amplifi cation. ADA-4643 is fabricated using Avago’s HP25 silicon bipolarprocess, which employs a double-diff used single poly-silicon process with self-aligned submicron emitter geometry. The process is capable of simultaneous high f T and high NPN breakdown (25 GHz f T at 6 V BVCEO). The process utilizes industry standard device oxide isolation technologies and submicron aluminum multilayer inter-connect to achieve superior performance, high uniformity, and proven reliability.Surface Mount PackageSOT-343Pin Connections and Package MarkingNote:Top View. Package marking provides orientation and identifi cation.“2T” = Device Code“x” = Date code character identifi es month of manufacture.V CC = 5 VRF inputRF Features∙ Small Signal gain amplifi er∙ Operating frequency DC – 2.5 GHz ∙ Unconditionally stable ∙ 50 Ohms input & output∙ Flat, Broadband Frequency Response up to 1 GHz∙ Operating Current: 20 to 60 mA ∙ Industry standard SOT-343 package∙ Lead-free option available Specifi cations900 MHz, 3.5 V, 35 mA (typ.)∙ 17 dB associated gain ∙ 13.4 dBm P 1dB ∙ 28.3 dBm OIP 3∙ 4 dB noise fi gure∙ VSWR < 2.2 throughput operating frequency ∙ Single supply, typical I d = 35 mAApplications∙ Cellular/PCS/WLL base stations ∙ Wireless data/WLAN ∙ Fiber-optic systems ∙ ISMTypical Biasing Confi gurationADA-4643 Electrical Specifi cationsT A = 25° C, Zo = 50 Ω, Pin = -25 dBm, I d = 35 mA (unless specifi ed otherwise)SymbolParameter and Test Condition:I d = 35 mA, Zo = 50 ΩFrequencyUnitsMin.Typ.Max.Std. Dev.V d Device Voltage I d = 35 mA V 3.2 3.5 3.9Gp Power Gain (|S 21|)2100 MHz 900 MHz [1,2]dB15.517.517.018.5∆Gp Gain Flatness 100 to 900 MHz 0.1 to 2 GHz dB 0.51.8F 3dB 3 dB BandwidthGHz3.2VSWR in Input Voltage Standing Wave Ratio0.1 to 6 GHz2.0:1VSWR out Output Voltage Standing Wave Ratio 0.1 to 6 GHz 1.6:1NF 50 Ω Noise Figure100 MHz 900 MHz [1,2]dB 3.94.00.070.1P 1dB Output Power at 1dB Gain Compression 100 MHz 900 MHz [1,2]dBm 14.713.4OIP 3Output 3rd Order Intercept Point100 MHz [3]900 MHz [1,2]dBm 29.028.3DV/dTDevice Voltage Temperature Coeffi cientmV/°C-5.3Notes:1. Typical value determined from a sample size of 500 parts from 3 wafers.2. Measurement obtained using production test board described in the block diagram below.3. I) 900 MHz OIP 3 test condition: F1 = 900 MHz, F2 = 905 MHz and Pin = -25 dBm per tone. II) 100 MHz OIP 3 test condition: F1 = 100 MHz, F2 = 105 MHz and Pin = -25 dBm per tone.ADA-4643 Absolute Maximum Ratings [1]SymbolParameterUnitsAbsolute MaximumI d Device CurrentmA 70P diss Total Power Dissipation [2]mW 270P in max.RF Input Power dBm 18T j Channel Temperature ︒C 150T STG Storage Temperature ︒C -65 to 150θjcThermal Resistance [3]︒C/W152Notes:1. Operation of this device above any one of these parameters may cause permanent damage.2. Ground lead temperature is 25° C. Derate 6.6 mW/°C for TL >109° C.3. Junction-to-case thermal resistance measured using 150° C Liquid Crystal Measurement method.Block diagram of 900 MHz production test board used for V d , Gain, P 1dB , OIP 3, and NF measurements.Circuit losses have been de-embedded from actual measurements.Product Consistency Distribution Charts at 900 MHz, I d= 35 mAGAIN (dB)300250200150100500V d (V)300250200150100500*********************************=15.5,Nominal=17,USL=18.5Figure 2. V d *********************=3.2,Nominal=3.5,USL=3.9Notes:1. Statistics distribution determined from a sample size of 500 parts taken from 3 diff erent wafers.2. Future wafers allocated to this product may have typical values anywhere between the minimum and maximum specifi cation limits.ADA-4643 Typical Performance Curves (at 25° C, unless specifi ed otherwise)Figure 3. Gain vs. Frequency at I d = 35 mA.Figure 4. P 1dB vs. Frequency at I d = 35 mA.Figure 5. OIP 3 vs. Frequency at I d = 35 mA.Figure 6. NF vs. Frequency at I d = 35 mA.Figure 7. Id vs. V d and Temperature.Figure 8. Gain vs. I d and Temperature at 900 MHz.FREQUENCY (GHz)G A I N (d B )62135420151050FREQUENCY (GHz)P 1d B (d B m )06213542015105FREQUENCY (GHz)O I P 3 (d B m )062135430252015105FREQUENCY (GHz)0621354N F (d B )65432V d (V)I d (m A )706050403020100I d (mA)G A I N (d B )18171615141312Figure 9. P 1dB vs. I d and Temperature at 900 MHz.Figure 10. OIP 3 vs. I d and Temperature at 900 MHz.Figure 11. NF vs. I d and Temperature at 900 MHz.Figure 12. Gain vs. I d and Frequency (GHz).Figure 13. P 1dB vs. I d and Frequency (GHz).Figure 14. OIP 3 vs. I d and Frequency (GHz).I d (mA)O I P 3 (d B m )0.10.50.91.52.02.53456403530252015105I d (mA)P 1d B (d B m )20151050-5-10I d (mA)O I P 3 (d B m )I d (mA)N F (d B )16543210I d (mA)G A I N (d B )402010303030302018161412108I d (mA)P 1d B (d B m )2520151050-5-10Figure 15. NF vs. I d and Frequency (GHz).Figure 16. Input Return Loss vs. I d and Frequency (GHz).Figure 17. Output Return Loss vs. I d and Frequency (GHz).I d (mA)N F (d B )65.554.543.53FREQUENCY (GHz)I R L(d B )-5-10-15-20FREQUENCY (GHz)O R L (d B )0-5-10-15-20-25Freq. GHz11 211222K Mag. Ang. dB Mag. Ang. Mag. Ang. Mag. Ang.0.10.172 1.1 17.2 7.246 175.9 0.093 -0.8 0.245 -4.1 1.10.5 0.202 10 17.04 7.113 160.2 0.091 -4.5 0.245 -12.6 1.10.9 0.277 12.3 16.67 6.814 144.7 0.088 -7.4 0.269 -20.4 1.11.0 0.286 9.9 16.56 6.726 141.1 0.087 -7.9 0.274 -23.1 1.11.5 0.349 -2.8 15.98 6.292 124.2 0.083 -9.3 0.28 -37.6 1.11.9 0.375 -11.3 15.54 5.984 111.4 0.080 -9.5 0.273 -48.9 1.22.0 0.382 -13.8 15.44 5.918 108.3 0.080 -9.5 0.271 -51.7 1.22.5 0.397 -24.2 14.93 5.581 93.20.078-8.9 0.249 -65.8 1.23.0 0.402 -34.7 14.475.29 78.60.078 -7.8 0.22 -81.7 1.33.5 0.394 -46 14.025.021 64.2 0.079 -6.6 0.192 -100.9 1.34.0 0.378 -58.7 13.58 4.775 50 0.082 -5.4 0.176 -123.8 1.34.5 0.361 -73.1 13.16 4.55 35.9 0.087 -4.6 0.179 -148.6 1.35.0 0.340 -89.3 12.64 4.284 21.9 0.094 -4.9 0.191 -169.9 1.35.5 0.328 -107.1 12.15 4.05 8.3 0.102 -5.9 0.212 173.3 1.26.0 0.318 -124.8 11.6 3.803 -5.4 0.112 -8.3 0.233 158.2 1.26.5 0.299 -141.1 11.09 3.584 -18.6 0.124 -11.5 0.25 141.6 1.17.0 0.274 -159.7 10.56 3.371 -32 0.138 -16.5 0.27 123 1.17.5 0.243 177.3 9.96 3.149 -45.6 0.150 -22.8 0.3 103.6 1.18.0 0.222 148.7 9.29 2.914 -59.1 0.161 -30 0.337 84.8 1.18.5 0.226 119.9 8.41 2.632 -71.8 0.168 -36.7 0.381 70.1 1.19.0 0.26 95.4 7.62 2.406 -83.7 0.177 -43 0.429 58.4 1.19.5 0.305 75.2 6.67 2.155-96.1 0.187 -49.9 0.48148.4 1.110.0 0.356 60.1 5.82 1.954 -107.1 0.195-57.3 0.529 39.7 1Notes:1. S-parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the input lead.The output reference plane is at the end of the output lead.Freq. GHz11211222K Mag. Ang. dB Mag. Ang. Mag. Ang. Mag. Ang.0.1 0.151 1.6 17.51 7.504 175.9 0.091 -0.8 0.223 -4.1 1.10.5 0.185 13.1 17.35 7.367 160.1 0.09 -4.2 0.224 -11.7 1.10.9 0.265 14.9 16.98 7.06 144.6 0.087 -7 0.251 -19 1.11.0 0.272 12.4 16.86 6.97 140.9 0.086 -7.5 0.256 -21.7 1.11.50.340 -0.7 16.27 6.511 123.9 0.082 -8.8 0.264 -36.2 1.11.9 0.367 -9.5 15.82 6.178 111 0.080 -9.1 0.259 -47.6 1.22.0 0.373 -12.1 15.72 6.107 108 0.079 -9.1 0.256-50.3 1.22.5 0.39 -22.7 15.19 5.745 92.8 0.078 -8.5 0.236 -64.4 1.23.0 0.395 -33 14.715.436 78.3 0.077 -7.3 0.209 -80.4 1.33.5 0.387 -44.3 14.235.149 63.9 0.079 -6 0.181 -99.9 1.34.0 0.370 -57.4 13.79 4.89 49.9 0.082 -4.8 0.166 -123.4 1.34.5 0.353 -71.6 13.36 4.657 35.9 0.087-3.9 0.17 -148.9 1.35.0 0.332 -87.7 12.84 4.383 21.9 0.093 -4.2 0.185 -170.6 1.25.5 0.319 -106 12.34 4.141 8.3 0.102 -5.1 0.207 172.5 1.26.0 0.310 -123.6 11.8 3.889 -5.4 0.112 -7.5 0.23 157.5 1.26.5 0.293 -140.2 11.28 3.666 -18.6 0.124 -10.8 0.248 140.9 1.17.0 0.266 -158.8 10.75 3.449 -32 0.138 -15.8 0.27 122.3 1.17.5 0.238 177.8 10.15 3.219 -45.5 0.151 -22.2 0.301 103 1.18.0 0.217 148.5 9.48 2.979 -59 0.161 -29.3 0.34 84.3 1.18.5 0.222 119.5 8.62 2.697 -71.7 0.169 -36.1 0.385 69.6 1.19.0 0.256 95 7.81 2.458 -83.4 0.178 -42.5 0.434 57.9 1.19.5 0.300 74.9 6.88 2.208 -95.8 0.188 -49.5 0.486 47.9 110.0 0.357 59.1 6.01 1.996 -107.2 0.196 -56.9 0.53439.2 1Notes:1. S-parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the input lead.The output reference plane is at the end of the output lead.Freq. GHz11211222K Mag. Ang. dB Mag. Ang. Mag. Ang. Mag. Ang.0.1 0.137 2.417.72 7.691 175.9 0.09-0.70.207 -4 1.10.5 0.174 15.317.567.547 1600.089 -4 0.209-10.9 1.10.9 0.25717.417.19 7.234 144.5 0.086 -6.8 0.238-17.6 1.11.0 0.267 14.717.087.144140.80.085 -7.2 0.243 -20.3 1.11.50.334 0.716.47 6.664 123.70.081 -8.50.253-34.8 1.11.9 0.36 -8.416.01 6.317 110.70.079 -8.7 0.249 -46.1 1.12.0 0.367-10.915.91 6.241107.70.079 -8.7 0.247-48.9 1.22.5 0.386-21.615.36 5.86292.5 0.077 -8.1 0.227 -62.9 1.23.0 0.39 -32.114.865.534 78 0.077 -7 0.201 -78.9 1.23.5 0.382-43.414.385.237 63.6 0.078 -5.70.174 -98.4 1.34.0 0.365 -56.4 13.93 4.97149.7 0.081 -4.5 0.159-122.3 1.34.5 0.348 -70.813.5 4.732 35.7 0.086-3.6 0.164-148.3 1.35.0 0.327 -86.8 12.97 4.45 21.7 0.093 -3.9 0.179-170.4 1.25.5 0.314 -105.112.48 4.205 8.20.101-4.8 0.202172.6 1.26.0 0.304-122.811.93 3.947 -5.5 0.112 -7.1 0.226 157.6 1.26.5 0.287 -139.6 11.41 3.721 -18.70.124 -10.40.245 140.9 1.17.0 0.26-159.1 10.88 3.498 -32 0.138 -15.40.268122.3 1.17.5 0.232177.610.28 3.264 -45.6 0.151 -21.80.3 102.9 1.18.0 0.213147.8 9.6 3.02 -59.10.161 -28.90.339 84.2 1.18.5 0.218120.28.7 2.724 -71.7 0.169 -35.80.385 69.5 1.19.0 0.2694.27.95 2.498 -83.70.179-42.10.434 57.9 1.19.5 0.30374 6.98 2.233 -96.20.189-49.20.48747.9 110.0 0.35259.4 6.14 2.027-107.1 0.196 -56.60.53539.1 1Notes:1. S-parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the input lead.The output reference plane is at the end of the output lead.Freq. GHz11211222K Mag. Ang. dB Mag. Ang. Mag. Ang. Mag. Ang.0.1 0.126 2.4 17.88 7.834 175.9 0.089 -0.7 0.194 -3.8 1.10.5 0.165 18.1 17.73 7.696 159.9 0.088 -3.8 0.196 -9.9 1.10.9 0.252 19.6 17.36 7.377 144.3 0.085 -6.4 0.227 -16.1 1.11.0 0.261 16.4 17.24 7.28 140.6 0.085 -6.9 0.233 -18.8 1.11.5 0.33 2 16.63 6.787 123.3 0.081 -8.2 0.244 -33.2 1.11.9 0.359 -7.4 16.16 6.424 110.3 0.079 -8.4 0.241 -44.4 1.12.0 0.365 -9.8 16.05 6.343 107.2 0.078 -8.4 0.239 -47.2 1.12.5 0.386 -21 15.49 5.948 91.9 0.077 -7.8 0.221 -61 1.23.0 0.387 -31.5 14.985.61 77.4 0.077 -6.7 0.195 -76.8 1.23.5 0.381 -43 14.495.301 63.1 0.078 -5.5 0.168 -96.2 1.34.0 0.363 -56 14.025.025 49 0.081 -4.3 0.153 -120.3 1.34.5 0.344 -70.7 13.58 4.777 35 0.086 -3.5 0.157 -146.9 1.35.0 0.323 -87.3 13.04 4.488 21 0.093 -3.7 0.172 -169.4 1.25.5 0.31 -105.8 12.54 4.235 7.5 0.101 -4.6 0.195 173.4 1.26.0 0.301 -123.6 11.98 3.971 -6.2 0.111 -6.9 0.22 158.2 1.26.5 0.281 -140.6 11.44 3.735 -19.4 0.124 -10.2 0.239 141.4 1.17.0 0.257 -159.9 10.9 3.507 -32.7 0.138 -15.2 0.262 122.5 1.17.5 0.228 176.3 10.29 3.271 -46.3 0.151 -21.5 0.294 103 1.18.0 0.212 145.6 9.61 3.022 -59.8 0.161 -28.6 0.333 84.3 1.18.5 0.218 117.8 8.72 2.728 -72.4 0.169 -35.6 0.38 69.5 1.19.0 0.257 92.7 7.94 2.494 -84.1 0.178 -41.8 0.429 57.9 1.19.5 0.302 72.9 6.98 2.234 -96.4 0.189 -48.9 0.482 47.9 110.0 0.359 57.7 6.11 2.02 -107.7 0.196 -56.4 0.531 39.2 1Notes:1. S-parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the input lead.The output reference plane is at the end of the output lead.11Ordering InformationPart NumberNo. of DevicesContainerADA-4643-TR1 3000 7” ReelADA-4643-TR2 10000 13” ReelADA-4643-BLK 100 antistatic bag ADA-4643-TR1G 3000 7” ReelADA-4643-TR2G 10000 13” Reel ADA-4643-BLKG 100antistatic bagNote: For lead-free option, the part number will have the character “G” at the end.Package DimensionsOutline 43SOT-343 (SC70 4-lead)Recommended PCB Pad Layout for Avago’s SC70 4L/SOT-343 ProductsDIMENSIONS (mm)MIN.1.151.851.800.800.800.000.150.550.100.10MAX.1.352.252.401.101.000.100.400.700.200.46SYMBOL E D HE A A2A1b b1c LNOTES:1. All dimensions are in mm.2. Dimensions are inclusive of plating.3. Dimensions are exclusive of mold flash & metal burr.4. All specifications comply to EIAJ SC70.5. Die is facing up for mold and facing down for trim/form, ie: reverse trim/form.6. Package surface to be mirror finish.1.30(0.051)Dimensions inmm (inches)(0.039)For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-3753EN AV02-3598EN - June 8, 2012(COVER TAPE THICKNESS)DESCRIPTIONSYMBOL SIZE (mm)SIZE (INCHES)LENGTH WIDTH DEPTH PITCHBOTTOM HOLE DIAMETERA 0B 0K 0P D 12.40 ± 0.102.40 ± 0.101.20 ± 0.104.00 ± 0.101.00 + 0.250.094 ± 0.0040.094 ± 0.0040.047 ± 0.0040.157 ± 0.0040.039 + 0.010CAVITYDIAMETER PITCH POSITIOND P 0E 1.50 ± 0.104.00 ± 0.101.75 ± 0.100.061 + 0.0020.157 ± 0.0040.069 ± 0.004PERFORATIONWIDTHTHICKNESS W t 18.00 + 0.30 - 0.100.254 ± 0.020.315 + 0.0120.0100 ± 0.0008CARRIER TAPE CAVITY TO PERFORATION (WIDTH DIRECTION)CAVITY TO PERFORATION (LENGTH DIRECTION)FP 23.50 ± 0.052.00 ± 0.050.138 ± 0.0020.079 ± 0.002DISTANCEWIDTHTAPE THICKNESSC T t 5.40 ± 0.100.062 ± 0.0010.205 + 0.0040.0025 ± 0.0004COVER TAPE Device OrientationTape DimensionsFor Outline 4TUSER FEEDEND VIEWTOP VIEW。

ES2GA-13-F中文资料

ES2GA-13-F中文资料

ES2GA-13-F中文资料e 3ES2A/A - ES2D/A2.0A SURFACE MOUNT SUPER-FAST RECTIFIER·Case: SMA/SMB·Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0·Moisture Sensitivity: Level 1 per J-STD-020C ·Terminals: Lead Free Plating (Matte TinFinish). Solderable per MIL-STD-202, Method 208 ·Polarity: Cathode Band or Cathode Notch ·Marking Information: See Page 3·Ordering Information: See Page 3·SMA Weight: 0.064 grams (approximate)·SMB Weight: 0.093 grams (approximate)·Glass Passivated Die Construction·Super-Fast Recovery Time For High Efficiency ·Surge Overload Rating to 50A Peak ·Ideally Suited for Automated Assembly ·Lead Free Finish/RoHS Complaint (Note 4)Mechanical DataMaximum Ratings and Electrical Characteristics@ T A = 25°C unless otherwise specifiedSingle phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.AA, BA, CA, DA Suffix Designates SMA Package A, B, C, D, Suffix Designates SMB PackageFeaturesNotes:1.Unit mounted on PC board with 5.0 mm 2 (0.013 mm thick) copper pads as heat sink.2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.3. Measured with I F = 0.5A, I R = 1.0A, I rr = 0.25A. See Figure 5.4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.5. Short duration pulse test used to minimize self-heating effect.0102030110100I , P E A K F O R W A R D S U R G E C U R R E N T (A )F S M NUMBER OF CYCLES AT 60HzFig. 3 Surge Current Derating Curve4050600.11.01010010004080120PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics00.81.62.4255075100125150175I , A V E R A G E F O R W A R D C U R R E NT (A )O T , TERMINAL TEMPERATURE (°C)T Fig. 1 Forward Current Derating Curve 2.00.41.2Set time base for 50/100 ns/cm+0.5A0A -0.25A-1.0AFig. 5 Reverse Recovery Time Characteristic and Test Circuit I , I N S T A N T A N E O U S F O R W A R D C U R R E N T (A ) F V , INSTANTANEOUS FORWARD VOLTAGE (V)F Fig. 2 Typical Forward Characteristics0.010.11.0100.40.81.21.6oT = 25C jES2XA = Product type marking code, ex: ES2BA (SMA package)ES2X = Product type marking code, ex: ES2A (SMB package) = Manufacturers’ code marking YWW = Date code markingY = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52YWW ES2X(A)Ordering Information(Note 6)* x = Device type, e.g. ES2BA-13-F (SMA package); ES2A-13-F (SMB package).Notes:6. For Packaging Details, go to our website at /datasheets/ap02007.pdf.IMPORTANT NOTICEDiodes Incorporated and its subsidiaries reserve the right tomake modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.LIFE SUPPORTDiodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.Marking Information。

HIF3B系列连接器产品说明书

HIF3B系列连接器产品说明书

HIF3-2022SC HIF3-2226SCF HIF3-2428SCA HIF3-2630SCC HIF3-2428SCF HIF3-2428SCFA HIF3B-6D-2.54R HIF3B-14D-2.54R HIF3-GPIN(A)B15Ribbon Cable connector Compliant with MIL StandardHIF3B Series■Features1. Product Compliant with MIL StandardHIF3B series has been developed as a product compliant with MIL standard, and used for wide applications.2. UL Approval ProductHIF3B series connectors are UL approved.3. Mechanism to Prevent Mis-insertionThis connector is equipped with the mechanism to prevent Mis-insertion as follows.1The system provides the convex area to insert the guide-key on the pin header side, and to guide it in combination with the socket convex area (MIL standard).2The system embeds and guides the polarizing key in the socket holes.4. Applicable Cable AWG#28The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. 0.9±0.1mm).O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B16HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Ordering InformationHIF 3B - * D - 2.54 Rqwre tyq Series Name: HIFw Series No.: 3B, 3BA, 3BB (50, 60, 64 contacts only )e Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64 r Contact alignment : D : Double t Contact pitch : 2.54mmy Connection typeR : ID type ●SocketHIF 3B - *P A - 2.54 DSqwretyuq Series Name : HIF w Series No.:3B: (14 contacts not included)3BC: (10 contacts only) 3BA, 3BB: (50, 60, 64 contacts only)3BD: (10 contacts only)e Number of contacts : 6,10,14,16, 20, 26, 30, 34, 40, 50, 60, 64r P : Pin headertA: Selective gold plated y Contact pitch : 2.54mm u Contact styleDS : Right angle type DSA: Straight type●Pin HeaderO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B17HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Socket (With guide to prevent mis-insertion)Unit:mmNote1, Note2: The number of polarizing keys and polarizing keyways changes according to products. Refer to the list as shown below.Note3: The 50, 60 and 64 contact connector contain two types of polarizing guides. Use the products, referring to Notes 1 and 2.Note4: The 6 contact has no polarizing mark.Body Protector ClampO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B18HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■SocketNote1: The number of polarizing keys and polarizing keyways changes according to products. For details, refer to the list as shown below.Note2: The 6 contact has no polarizing mark.Body Protector ClampUnit:mmThe products marked with ★comply with MIL standard.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B19HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Four Wall Angle Through holeBPCB mounting patternNote 1, Note 2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3: The spacer moves to the right according to the number ofcontacts.Note 4: The 10, 50, 60 and 64 contact connectors contain two types ofpolarizing slots.Use products, referring to (Note 1) (Note 2).■n=number of contactsUnit:mmThe products marked with ★comply with MIL standard.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B20HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Four-Wall Straight Through holeBPCB mounting patternNote 1, Note 2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3: The spacer moves to the right according to the number ofcontacts.Note 4: The 10, 50, 60 and 64 contact connectors contain two types ofpolarizing slots.Use products, confirming (Note 1) (Note 2).Note 5: The 6 contact has no polarity mark.■n=number of contactsUnit:mmO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B21HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Three Wall Angle TypeBPCB mounting patternNote 1, Note 2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3: The spacer moves according to the number of contacts.Note 4: The 10 contact connector consists of two types.Use products, confirming (Note 1) (Note 2).■n=number of contactsUnit:mmThe products marked with ★comply with MIL standard.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B22HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Three Wall Straight Through holeBPCB mounting patternNote1,Note2: The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note3: The spacer moves to the right according to the number ofcontacts.Note4: The 10 contact connector consists of two types.Use products, referring to (Note 1) and (Note 2).■n=number of contactsUnit:mmThe products marked with ★comply with MIL standard.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B23HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Four Wall Wrapping TypeBPCB mounting patternNote 1, Note 2. The number of polarizing slot and key installed positionschanges according to products. Refer to the list as shown below.Note 3. The spacer moves to the right according to the number ofcontacts.Note 4. The 10, 50, 60 and 64 contact connectors consists of two types.Use products, confirming (Note 1) (Note 2).Note 5. The mark *indicates the number of contacts.Note 6. The nut built-in specification product is also provided.The product can be fixed by M2 screws from the rear e the screw of (board thickness) +4 mm under the neck.■n=number of contactsUnit:mmThe products marked with ★comply with MIL standard.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .■Four Wall Straight Through hole [Flux Blister Prevention Type ]BPCB mounting patternNote1: The number of polarizing slot and key installed positions changesaccording to products. Refer to the list as shown below.■n=number of contactsUnit:mmO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .■Two Stage Staking Right Angle Through holeNote 1, Note 2: The number of polarizing slot and key installed positions changes according to products. Referto the list as shown below.Note 3: The spacer moves to the right according to the number of contacts.Note 4: The 10, 50, 60 and 64 contact connectors consists of two types.Use products, confirming (Note 1) (Note 2).Note 5: The mark *ndicates the number of contacts.Note 6: The locator is located optionally.Unit:mmThe products marked with ★comply with MIL standard.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .BCombination PatternBPCB mounting pattern■Mounting Hole SpacerNote : Fix the HIF3-mounting hole spacer by screws between upper stage and lower stage connectors.Note : 2 pieces are contained in a bag.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .BPolarizing KeyNote1: One unit of thisproduct is a set of five pieces in conjunction with a runner. The unit for sale is defined one pack containing 20pieces.Note2: This product isapplicable to the HIF3BA-*D2.54R product.HIF3-GPIN(A)HIF3BA-GPINNote1: One unit of thisproduct is a set of five pieces in conjunction with a runner. The unit for sale is defined one pack containing 20pieces.Note2: This product isapplicable to HIF3A-*D2.54R, HIF3C-*D2.54C and HIF3BA-*D2.54C products.HIF3B-GK CL562-0601-8O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B HIF3-Multi Clamp B HIF3-*CL Pull Tab●Low Profile Lock Pin HeaderB Lock●F Type Lock Pin HeaderLow profile type, and used for lock ejection.Locking range more reduced than conventional lock type.This clamp is used for intermediate connection in the bus-line system, etc. Remove compulsory force from the insulation displacement area of the connector in intermediate connection.Note: The pin header corresponds to the HIF3BAEseries (lock E).This pull tab is used for the HIF3 series equipped with cable clamp function. Remove all compulsory force, which is loaded on the insulation displacement area of the connector for extraction.Note: This HIF3-* Pull Tab can not be used for HIF3BA-*PD.Note: The pin header corresponds to the HIF3BAE series (lock E).27.321.5O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .■Socket for CrimpingO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .■Cover Case for Crimping socketNote 2: Note that the product cannot be used with AWG #20.Applicable jacket diameters are as described below.20 contacts: 1.7 mm diameter MAX26 to 40 contacts: 1.6 mm diameter MAX 50 to 60 contacts: 1.4 mm diameter MAXO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .RoHS■Contact for Crimping SocketType VA (Selective gold plated in reel)Type VA (Selective gold plated contact in bag)RoHSRoHSRoHS RoHSRoHSO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .B Tools●Crimping ToolManual Crimping Tool HIF3-T2226HC●Automatic Crimping Tool (Type: CM-105)●Contact Extraction Tools How to use the extraction tool(1) How to extract contactsAs shown in Figure 1, where the extraction tool is inserted in the lance fixed slot on the insulated case, slightly pull the cable, and the contact can be removed.(2) How to adjust the lance (raise)In order to re-insert the contact removed from the insulated case,raise the contact lance area using the tool A, and re-insert the contact, asshown in Figure 2.Figure 1Part Number CL No.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .Note1: AP106-HIF3-22-28SCF and AP105-HIF3-22-28CFA can be modified by changing a few parts.O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardB Socket Side (Crimping) Assembling Procedures(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown Figure 2.(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).Note1 : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".Note2 : Wire strip length: Refer to crimp condition sheet.Figure 1Figure 2Figure 3Figure 4Wire strip lengthO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardHIF3B Connection Circuit DiagramType ABType ADType CDT y p e A BT y p e A D T y p e C D O c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardType ACType CCType AA T y p e A CT y p e C CT y p e A AO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardHIF2E R(S) A to HIF3B Connection Circuit DiagramType AAType ACO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardType BAType BCO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardHIF2E R(S)B to HIF3 Connection Circuit DiagramType AAType ACO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL StandardType BAType BCO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■Features1. In-line TypeThis connector can be used for internal wiring cable to cable within equipment.2. CompatibilityThis connector is compatible with HIF3A series as well as HIF3B series socket.3. Applicable CableThe applicable cable is UL2651 AWG#28 flat cable (7 pcs./6.127mm, jacket diameter: 0.8to 1.0mm).Note 1: Includes temperature rise caused by current flow.Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range andHumidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for aspecific part number shown.■Ordering InformationHIF3BA - *P D - 2.54 R - MCqerwutyq Series Name: HIF3BB (50, 60, 64 contacts only)HIF3BD (10 contacts only)HIF3BAE (60 contacts only)w Number of Contacts : 10, 16, 20, 26, 30, 34, 40, 50, 60and 64e P : Plug r D : contact alignment : D : Double t Contact Pitch : 2.54mm y Connection type : Ribbon cable u MC: Mold clampO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series ●Ribbon Cable connector Compliant with MIL Standard■PlugNote 1, Note 2: The number of polarizing slot and key installed positions changes according to products.The 10 contact connector only has no position for polarizing key insulation.Note 3: The number indicated in parentheses are sizes for 60 and 64 contact connectors.Note 4: The HIF3BAE-60PD-2.54R-MC product partially differs in a locking form, and the mating member isapplicable for HIF3A only.Unit:mm*D sizeunlocking sizeO c t .1.2018 C o p y r i g h t 2018 H I R O S E E L E C T R I C C O ., L T D . A l l R i g h t s R e s e r v e d .HIF3B Series●Ribbon Cable connector Compliant with MIL Standard BConnection ProceduresType AOType BOType COType DONote1: Cable length tolerance Less than 500 (mm)More than 500 (mm)Note2: When a cable such as a twist cableor a slit (like a roller screen) cable isused, the cable pitch will changeaccording to cable manufacturers.If connection failure has occurred,please contact Hirose sales.+10+3Oct.1.218Copyright218HIROSEELECTRICCO.,LTD.AllRightsReserved.HIF3-2022SC HIF3-2226SCF HIF3-2428SCA HIF3-2630SCC HIF3-2428SCF HIF3-2428SCFA HIF3B-6D-2.54R HIF3B-14D-2.54R HIF3-GPIN(A)。

RGF简介

RGF简介

RGF简介美国RGF环保集团于1985年由以Ron Fink 为首的世界顶级环境净化专家创立,他们都具有超过40年的环境净化经验。

RGF的创立宗旨就是不使用任何化学试剂而为世界提供最纯净的空气、水和食品。

美国RGF成立20年以来,一直居于世界环境净化领域的技术领头羊地位,发明了众多的世界最先进的净化技术,先后开发出:高级氧化技术、紫外线直接照射技术、臭氧应用、催化氧化技术、羟基应用、(钛-银-铑-铜)稀有特殊金属催化技术、银离子、氧离子、超氧离子、臭氧离子、广谱紫外线照射技术、软表面放射、放射催化离子化技术(Radiated Catalytic Ionization TM)、羟基离子、高强度紫外线、金属化合物烧结技术、UV管PPC覆盖技术、光催化氧化技术、光氢催化氧化技术(Photohydrocatalytic TM)和今天最先进的光氢离子化技术(PHI TM)。

通过应用这些技术,RGF开发出多项专利和超过500种产品,应用在世界60多个国家。

RGF拥有多项技术专利,世界上很多净化器生产厂家都向RGF购买专利技术或委托RGF进行OEM生产,如美国乃至世界最大的净化器生产销售厂家ECOQUEST;日本大基金控股的、在全世界拥有众多企业的的SHARKLEE集团;荷兰、德国、英国等欧洲国家及墨西哥等拉美国家。

更有美国本土及日本、韩国企业努力想模仿RGF 的技术而称自己的技术为所谓的“等离子净化”等。

RGF的产品畅销世界上60 多个国家,大多数财富500强公司都使用RGF产品,赢得了广泛的赞誉,其客户包括:由于RGF的突出净化技术和在业界的领先地位,在美国出现炭疽邮件袭击后,美国国家实验室和RGF合作,利用RGF的技术作为生物反恐之用。

而中国政府则在2001年SARS 袭击时利用RGF的产品在上海地铁、解放军301医院、北京小汤山医院运送SARS病人的救护车、中国航空航天城、“远望号”远洋科学考察船等消灭SARS病毒。

MEMORY存储芯片MT29F32G08AFABAWP-ITB中文规格书

MEMORY存储芯片MT29F32G08AFABAWP-ITB中文规格书

output begins at the column address last specified in the READ PAGE (00h-30h) com-mand. The RANDOM DATA READ TWO-PLANE (06h-E0h) command is used to enabledata output in the other cache registers.Figure 38: READ PAGE (00h-30h) OperationCycle typeI/O[7:0]RDYFigure 39: READ PAGE (00h-30h) Operation with Internal ECC EnabledRDYSR bit 1 = 0 READ errorREAD PAGE CACHE SEQUENTIAL (31h)The READ PAGE CACHE SEQUENTIAL (31h) command reads the next sequential pagewithin a block into the data register while the previous page is output from the cacheregister. This command is accepted by the die (LUN) when it is ready(RDY = 1, ARDY = 1). It is also accepted by the die (LUN) during READ PAGE CACHE(31h, 00h-31h) operations (RDY = 1 and ARDY = 0).To issue this command, write 31h to the command register. After this command is is-sued, R/B# goes LOW and the die (LUN) is busy (RDY = 0, ARDY = 0) for t RCBSY. Aftert RCBSY, R/B# goes HIGH and the die (LUN) is busy with a cache operation(RDY = 1, ARDY = 0), indicating that the cache register is available and that the specifiedpage is copying from the NAND Flash array to the data register. At this point, data canbe output from the cache register beginning at column address 0. The RANDOM DATAREAD (05h-E0h) command can be used to change the column address of the data beingoutput from the cache register.The READ PAGE CACHE SEQUENTIAL (31h) command can be used to cross blockboundaries. If the READ PAGE CACHE SEQUENTIAL (31h) command is issued after thelast page of a block is read into the data register, the next page read will be the next logi-cal block in which the 31h command was issued. Do not issue the READ PAGE CACHESEQUENTIAL (31h) to cross die (LUN) boundaries. Instead, issue the READ PAGECACHE LAST (3Fh) command.Figure 70: TWO-PLANE PAGE READWE#ALERE#I/OxR/B#Notes: 1.Column and page addresses must be the same.2.The least significant block address bit, BA6, must be different for the first- and second-plane addresses.Figure 71: TWO-PLANE PAGE READ with RANDOM DATA READR/B# RE# I/OxR/B# RE# I/Ox1 1Figure 72: TWO-PLANE PROGRAM PAGER/B#I/Ox1st-plane address2nd-plane addressI/OxFigure 74: TWO-PLANE PROGRAM PAGE CACHE MODER/B#I/Ox12R/B#I/OxR/B#I/Ox。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

3.0A Sintered Glass Passivated Fast Recovery Rectifier
Features
• Fast switching for high efficiency
• Ideal for surface mount automated applications
• High temperature soldering guaranteed: 260°C/10 seconds, at terminals
• Plastic package has UL Flammability Classification 94V-0
• RoHS Compliance
Mechanical Data
Case: JEDEC DO-214AA (SMB) molded plastic over passivated chip Terminals: Tin plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position:
Any
Weight:
0.004 ounes,0.12 gram
Maximum Ratings and Electrical Characteristics (T A =25ºC unless otherwise noted)
Symbol
Description RGF 3AB
RGF 3BB
RGF 3DB
RGF 3GB
RGF 3JB
RGF 3JAB
RGF 3KB
RGF 3KAB
RGF 3MB
RGF 3MAB
Unit Conditions
V RRM Max. Repetitive Peak
Reverse Voltage
50 100 200 400 600 600 800 800 1000 1000 V V RMS Max. RMS Voltage 35 70 140 280 420 420 560 560 700 700 V V DC Max. DC Blocking Voltage
50
100
200
400 600
600
800
800
1000
1000
V
V F Max. Forward Voltage
1.3 V I F(AV)=3.0A
I F(AV) Max. Average Forward Rectified Current
3.0 A T L =100°C
I R(AV) Max. Full Load Reverse Current 100 µA T A =55°C
I FSM
Peak Forward Surge Current 115 A Note 1 5 T A =25°C 50 T A =125°C I R
Reverse Current @ VR = VRRM
120
µA T A =150°C
SMB
Fig.2- Maximum Non-Repetitive Forward Surge Current Number of Cycles at 60Hz
Symbol
Description RGF 3AB
RGF 3BB
RGF 3DB
RGF 3GB
RGF 3JB
RGF 3JAB
RGF 3KB
RGF 3KAB
RGF 3MB
RGF 3MAB
Unit Conditions
Trr
Max. Reverse Recovery Time 150
250 150 500 300 500 300 nS I F =0.5A,
I R =1.0A,
I rr =0.25A.
Rth JA 55
Rth JL Typical Thermal Resistance 15
°C / W
Note 2
C J
Typical Junction Capacitance
60 pF
V R =4V,
f=1MHz T J,T STG Operating Junction
and Storage
Temperature Range
-65 to +175
° C
Note: 1. 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)
2. Thermal resistance from junction to ambient and from junction to lead P.C.B mounted on
0.2 × 0.2” (5.0 × 5.0mm) copper pad areas.
Typical Characteristics Curves
Fig.1- Forward Current Derating Curve Lead Temperature (°C) A v e r a g e F o r w a r d C u r r e n t , (A )
P e a k F o r w a r d S u r g e C u r r e n t , (A )
Fig.4-Typical Reverse Characteristics
Percent of Rated Peak Reverse Voltage (%)
Fig.5-Typical Junction Capacitance
Reverse Voltage (V)
Fig.3- Typical Forward Characteristics Instantaneous Forward Voltage (V)
I n s t a n t a n e o u s R e v e r s e L e a k a g e C u r r e n t , (µA )
I n s t a n t a n e o u s F o r w a r d C u r r e n t , (A )
J u n c t i o n C a p a c i t a n c e , (p F )
Dimensions in inches (mm)
Marking Information:
Packing Information:
Carrier Tape Dimensions (in mm)
Reel Dimensions (in mm)
Components Outline
A0 B0 D E F K0 B1 See note 1
See note 1
1.5±0.1 1.75±0.1 5.50±0.05
See note 1
8.20max. P
P0
P2
T max.
W
T2 D1 SMB
8.00±0.10 4.0±0.10 2.0±0.1 0.40 12.00±3.00
2.67±0.10
1.5min.
A
B
C
w
T
330 ± 2.0(TR30) 178 ± 2.0(TR70)
50min. 13.0±0.5 18.7max. 14.4max.
Packing Quantity Information:
Quantity PCS per Reel
PCS per Inner Box
PCS per Carton
-TR70 Tape & Reel 750 3000 18000 - TR30 Tape & Reel
3200
6400
32000
Carton Size Information:
Cartoon Size (TR70) Cartoon Size (TR30) 400X207X240( in mm)
360X360X240( in mm)
How to contact us:。

相关文档
最新文档