ANDPSI056ET0S-HB-KIT中文资料
艾顿滤芯清洁筛选系统商品介绍说明书
Success Story: Paint ManufacturerMarkets ServedChemical: Paint ManufacturingEaton Corporation is a diversified power management company with 2010 sales of $13.7 billion. Celebrating its 100th anniversary in 2011, Eaton is a global technology leader in electrical components and systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approxi-mately 73,000 employees and sells products to customers in more than 150 countries. ©2011 Eaton Corporation, All Rights Reserved, October 2011Eaton Filters Sparkling for Global Paint SupplierLocation:Mumbai, India Segment:Paint ManufacturingProblem:Cleaning filtration equipment was labor intensive and hazardous to plant employees. Solution:Eaton filtration systemResults:The quality of finished paints has improved while the companyreduced process costs, and gained a safer and cleaner work enviroment. Contact Information:Eaton Corporation Filtration Division 70 Wood Ave. South Iselin, NJ 08830USABackgroundA large paint company in India manufactures a wide range of paints for decorative and industrial use.Fully committed to continuous quality improvements in itsbusiness practices, the company routinely tracks thoseachievements with measurable procedures. Its plants arecertified as environmentally safe.ChallengesIn the process of meeting both of those objectives, thecompany was recently forced to investigate a new way to filter impurities from soy-based resins used in the manufacturing of certain paints. Three different types of impurities compounded the problem.First, the dominant intruder, consisted of oversized particles that occur naturally in resins. Second, foreign fiber matters, which are finer than resinparticles, were also proving to be troublesome.The third was the buildup of colloidal haze, which again occurs naturally, and canadversely affect the quality of the paint.The existing setup was highly labor intensive requiring the manual dismantling of the equipment for cleaning.Exposure to hazardous gases and high temperatures were also present during cleaning. In addition, maintenance was becoming increasingly more difficult and costly, and plant officials believed that the aging system was occupying too much floor space. Its shabbyappearance due to years of resin spillage was also disconcerting to workers and visitors alike.SolutionWorking with plant officials, Eaton filtration experts based in China and India installed an Eaton DCF-1600 mechanically cleaned filter to remedy the problems associated with the large particles and foreign fibers.With two-thirds of the challenges met, an Eaton LOFDISC™ Module filter was additionally installed to remove the haze impurities and neatly close the loop on the system.The DCF-Series filters are ideal for highly viscous, abrasive or sticky liquids – including paint. DCF filters perform a self-cleaning action by mechanically scraping collected debris from the filter screen with a spring loaded cleaning disc that travels down and up, wiping the media clean of concentrated solids in both strokes. Collected debris is automatically purged from the collection chamber at the bottom of the filter.Based on a remarkably simple concept, the self-cleaning filter consists of a cylindrical stainless steel housing that contains a filter screen. Unfiltered liquids enter the inlet, solids aredeposited on the interior surface of the filtration media, and filtered fluid exits the outlet.Note: Features and specifications listed in this document are subject to change without notice and represent the maximum capabilities of the software and products with all options installed. Although every attempt has been made to ensure the accuracy of information contained within, Eaton makes no representation about the completeness, correctness or accuracy and assumes no responsibility for any errors or omissions. Features and functionality may vary depending on selected options.Without halting production, this self-cleaning action provides the highest quality filtering under continuous demand.The horizontal LOFDISC Module filter housings are equallyeffective, just as uncomplicated, yet better suited for filtering out tiny, fine particles like thecolloidal impurities barely larger than a standard molecule.ResultsOfficials at the paint company report that quality objectives have been met with the finished paint’s sparkle and finish better than ever.But best of all, the path togetting there is less costly, safer, and more environmentally friendly than what was experienced in the past.Financial gains are mainly attributed to filtration time reductions and improved flow rates that roughly have gone from one batch (18 tons) to four batches a day. Significantly less resin loss and reduced labor, disposal, and maintenance costs are bringing about additional savings.Meanwhile, the manual,hazardous cleaning of filters has been essentially eliminated.As for the aesthetics – a prettier picture is certainly now being painted with the smallerfootprint and cleaner operation of the new Eaton filtration system.Eaton Corporation Eaton Filtration70 Wood Ave. South Iselin, NJ 08830USA© 2011 Eaton CorporationAll Rights Reserved. Printed in USA.November 2011In Eaton’s DCF mechanically cleaned filter unit, incoming fluids (1) are channeled from the interior cylinder through a wire screen (2) to the outer cylinder and out the discharge port (3). A cleaning disc (4) travels down and up inside the cylinder to periodically clear the filter screen. Particles are collected at the bottom of the housing where they can be discharged (5).。
安迪桑安全保护设备说明书
ContentsPagen o i t p i r c s e D Introduction ..............................2Installation . (3)Installation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWCCircuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)Instruction Leaflet IL29C182F E ective February 2015Installation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWCCircuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION 23Instruction Leaflet IL29C182FInstallation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWC Circuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION E ective February 20154Instruction Leaflet IL29C182FInstallation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWC Circuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION Labels (Supplied Comb AlarmConnection Diagram Label (Pigtail Lead Label Shown)AccessoryIdent. LabelWire Marking Labels (Supplied With Double Alarm Sw. Only)Replacement Interphase BarrierWire MarkingLabels (SuppliedWith Comb.Alarm Aux. Sw.Only)Plug-In Module With Pigtail Leads (Double ASL Switch Shown)E ective February 20155Instruction Leaflet IL29C182FInstallation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWC Circuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION RecessedRecessed HoleHoleTripUnitRear Exiting LeadsPreferredSide Exiting LeadsTerminal BlockOpposite -Side Exiting LeadsSupplied With ASL Switch KitHandle Retaining Screw Molded Handle Handle ArmCradle Reset PinInterphase BarrierAt Angle ToPosition Actuator Arm Under CradleASL Switch Actuator ArmCradleSlot InReplacement Interphase BarrierE ective February 2015Instruction Leaflet IL29C182F Installation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/LockoutSwitch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWCCircuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION Arm (Must BeAnd OperatedBy the Cradle)(Interphase Barrier Omitted for Clarity)UnitCircuitBreakerHandlePositioned UnderAccessoryCombination Module t oPosition ASL SwitchActuator A r m UnderASL SwitchActuator A r mSlot In Replacementlnterphase BarrierCradleAuxiliarySwitchASL Switch(Cutaway toShow Detail)CradleAccessoryOperatingProjectionAuxiliarySwitchOperatingArmE ective February 201567Instruction Leaflet IL29C182FInstallation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWC Circuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION E ective February 20158Instruction Leaflet IL29C182FInstallation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWC Circuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION 312E ective February 20159Instruction Leaflet IL29C182FInstallation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/Lockout Switch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWC Circuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)EATON CORPORATION E ective February 2015Instruction Leaflet IL29C182F Installation Instructions for Alarm (Signal)/Lockout Switch and Alarm (Signal)/LockoutSwitch and Auxiliary Switch Combination for DK, KDB, KD, HKD, KDC, KW, HKW, KWCCircuit Breakers, Molded Case Switches, and K-Frame Motor Circuit Protectors (HMCP)Eaton CorporationElectrical Group1000 Cherrington ParkwayMoon Township, PA 15108United States877-ETN-CARE (877-386-2273)© 2013 Eaton CorporationAll Rights ReservedPrinted in Dominican Republic Publication No. IL 29C182E / TBG000553 Part No. 6632C65H06February 2015Eaton is a registered trademark of Eaton Corporation.All other trademarks are property of their respective owners.The instructions for installation, testing, maintenance, or repairherein are provided for the use of the product in general commercial applications and may not be appropriate for use in nuclear applica-tions. Additional instructions may be available upon requestto replace, amend, or supplement these instructions to qualify themfor use with the product in safety-related applications in a nuclear facility.The information, recommendations, descriptions, and safety nota-tions in this document are based on Eaton’s experience and judg-ment with respect to R tting of Power Breakers. This instruction-al literature is published solely for information purposes and shouldnot be considered all-inclusive. If further information is required, you should consult an authorized Eaton sales representative.The sale of the product shown in this literature is subject to theterms and conditions outlined in appropriate Eaton selling policiesor other contractual agreement between the parties. This literatureis not intended to and does not enlarge or add to any such contract. The sole source governing the rights and remedies of any purchaserof this equipment is the contract between the purchaser and Eaton.NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OR WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, ARE MADE REGARDING THE INFORMATION, RECOMMENDATIONS, AND DESCRIPTIONS CONTAINED HEREIN. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or otherwise for any special, indirect, incidental or conse-quential damage or loss whatsoever, including but not limited to damage or loss of use of equipment, plant or power system, costof capital, loss of power, additional expenses in the use of existing power facilities, or claims against the purchaser or user by its cus-tomers resulting from the use of the information, recommendations and description contained herein.E ective February 2015。
艾顿克屈服系列产品说明说明书
S U P P O R TB AC K ED BY Whether you’re maintaining a new truck or extending the service life of an older truck, Eaton's clutch portfolio ensures you get the right clutch for every stage of your truck's life cycle. Eaton clutches have navigated millions of miles, for thousands of customers, in a variety of applications. Each clutch is manufactured with Genuine Eaton parts, is thoroughly tested by Eaton, and is backed by our nation-wide Roadranger support team. Choose quality. Choose genuine.Best: Advantage Series Original equipment spec New, industry-leading technology designed and tested to outperform the highest OE specifications.• Leading strap drive technology improves intermediate plate connection, for more reliable performance • Designed to eliminate lug rattle and fatigue • Dual seal release bearing for best-in-class 50,000 mile lubrication intervals • Tuned, dual damper system absorbs engine vibrations and prevents idle rattle • Soft rate springs protect driveline components• Two wear indicators for improved serviceability• 3 year/unlimited mile warranty*Better: EverT ough® Series Genuine Eaton: extends the life of your truck Industry standard, proven technology for the aftermarket.• Industry-standard lug drive intermediate plate connection • Release bearing seal features a 360° design for 25,000 mile lubrication intervals • Three lubrication ports provide easy access for maintenance • Premium single damper system for superior driveline vibration control • 2 year/unlimited mile warranty*Good: Reman Series Prolong the life of an older truck Proven technology for price-conscious buyers.• Industry-standard lug drive intermediate plate connection • Release bearing seal features a 360° design • Two lubrication ports provide easy access for maintenance • Genuine Eaton parts • 1 year/unlimited mile warranty Why a Strap Drive Intermediate Plate Connection? The strap drive connection found on the Advantage series clutch improves the connection to the intermediate plate, eliminating lug failures and open clutch rattle. The alternative to the strap drive is a lug drive, which is the most common design in the market. However, since the lug is not fastened to the housing, it floats and vibrates when the clutch is open. This vibration of the intermediate plate lug can result in fatigue, and over time this fatigue can lead to failure. The straps in the Advantage clutch design affix the intermediate plate to the housing so it does notvibrate, eliminating lug rattle and improving longevity.*USA and Canada only. Please refer to the Roadranger Warranty Guide TCWY0900 for the latest warranty time and miles offering.Eaton genuine clutches provide the most value in the aftermarket, no matter the ageof your truck.Clutch Cross Reference Chart Eaton Clutches: Proven Superior PerformanceS U P P O R T B A C K E D B Y For spec’ing or service assistance, call 1-800-826-HELP (4357) or visit /roadranger . In Mexico, call 001-800-826-4357.Eaton Vehicle Group P .O. Box 4013Kalamazoo, MI 49003 USA800-826-HELP (4357)/roadranger © 2022 Eaton All Rights Reserved. Printed in USA.CLSL15320122Eaton, Roadranger, Fuller, UltraShift, Fuller Advantage, EverTough, Advantage Self-Adjust and Easy Pedal Advantage are registered trademarks of Eaton. All trademarks, logos and copyrights are those of their respectiveowners.。
安讯士5600系列机械热探测器技术规格说明书
5600 SeriesMechanical Heat DetectorsDN-6931:A1 • I-304GENERALSystem Sensor’s 5600 Series mechanical heat detectors offerproperty protection against fire and for non-life-safety installa-tions, where smoke detectors are inappropriate.Multiple configurations. The 5600 Series offers a full line ofconfigurations to accommodate a broad range of applications.Bo th single- and dual-circuit mo dels are o ffered, each avail-able fo r lo w- and high-temperature ratings with either fixed-temperature o r c o mbinati o n fixed-temperature/rate-o f-rise(ROR) activation. The ROR element of the fixed/ROR modelsis restorable, to accommodate field-testing the unit.Installation flexibility. To satisfy a variety of installations, the5600 Series easily mounts to single-gang and octagonal back-bo xes. These mo dels also acco mmo date 4" (101.6 mm)square backboxes when used with a plaster ring. The mount-ing bracket is reversible to allow for flush- and surface-mount backbox installations.Visual identification. The 5600 Series provides clear mark-ings on the exterior of the unit to ensure that the proper detec-to r is being used. Alphanumeric characters identify the activatio n metho d, as well as the temperature rating, in degrees Fahrenheit and Celsius. Fixed temperature mo dels are identified “FX”, while co mbinatio n fixed/rate-o f-rise units are marked “FX/ROR”. The 5600 Series also provides a col-lecto r as a po st-activatio n indicato r. Once the detecto r has been activated, the collector drops from the unit to allow easy identification of the specific unit in alarm.FEATURES•Multiple configurations available:–Fixed-temperature (no n-resettable) o r co mbinatio n fixed (non-resettable)/rate-of-rise (self-restoring).–Low-temperature and high-temperature ratings.–Single-circuit and dual-circuit.•Easy-to-read alphanumeric identificatio n o f detecto r type and temperature rating.•External collector provides visual indication of activation.•Reversible mo unting bracket fo r flush- and surface-mo unt installations.•Flexible mounting capabilities: single-gang, 3.5" or 4" octag-onal, 4" (101.6 mm) square with plaster ring.•Easy-to-use terminal screws provide a more positive wiring connection.•Low-profile design to coordinate with room aesthetics.AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.•UL Listed: S2101•ULC Listed: S2101 (all with “A” suffix)•MEA: 199-03-E•CSFM: 7270-1209:227, 7270-1653:167•FM Approved SPECIFICATIONSPHYSICAL SPECIFICATIONSMaximum installation temperature:For models 5601P, 5603, 5621, 5623: 100°F (38°C).For models 5602, 5604, 5622, 5624: 150°F (65.6°C).Alarm temperature:For models 5601P, 5603, 5621, 5623: 135°F (57°C).For models 5602, 5604, 5622, 5624: 194°F (90°C).Rate of Rise Threshold: 15°F (8.3°C) per minute (mo dels 5601, 5602, 5621, 5622 only).Operating Humidity Range: 5% to 95% RH noncondensing. Input Terminals: non-polarized, accept 14 to 22 AWG (2.0 to 0.33 mm²).Dimensions: diameter with mounting bracket: 4.57" (116 mm); height with mounting bracket: 1.69" (43 mm).Weight: 6 oz. (170 grams).Mounting Options: 3.5" (88.9 mm) o ctago nal backbo x; 4" (101.6 mm) o ctago nal backbo x; single-gang backbo x; 4" (101.6 mm) square backbo x with a square-to-ro und plaster ring.ELECTRICAL SPECIFICATIONSMechanical heat detecto r shall be a System Senso r 5600 Series model number ______, Listed to Underwriters Labora-tories UL 521 for Heat Detectors for Fire Protective Signaling Systems. The detector shall be either a single-circuit or a dual-circuit type, normally open. The detector shall be rated for acti-vation at either 135°F (57°C) or 194°F (90°C), and shall acti-vate by means o f a fixed-temperature thermal senso r, o r a c mbinati n fixed-temperature/rate-f-rise thermal sens r. The rate-o f-rise element shall be activated by a rapid rise in temperature, appro ximately 15°F (8.3°C) per minute. The detector shall include a reversible mounting bracket for mount-Operating Voltage Contact Ratings (resistive)6 - 125 VAC 3.0 A6 - 28 VDC 1.0 A125 VDC0.3 A250 VDC0.1 A6931pho1.jpgDN-6931:A1 • 2/9/10 — Page 1 of 2Page 2 of 2 — DN-6931:A1 • 2/9/10©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements.All specifications are subject to change without notice.For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.ing to 3.5-inch (88.9 mm) octagonal, 4-inch (101.6 mm) octag-o nal, single gang, and 4-inch (101.6 mm) square backboxes with a square-to -ro und plaster ring. Wiring co nnectio ns shall be made by means of SEMS screws that shall accommodate 14 – 22 AWG wire. The detecto r shall co ntain alphanumeric markings on the exterior of the housing to identify its tempera-ture rating and activation method. The rate-of-rise element of co mbinatio n fixed-temperature/rate-o f-rise mo dels shall be restorable, to allow for field-testing. The detectors shall include an external collector that shall drop upon activation to identify the unit in alarm.ORDERING INFORMATIONWIRING DIAGRAMSModel*IdentificationMethod on ExteriorCircuit TemperatureRatingActivationUL Protected Spacing,10’ (3.048 m) Ceiling*5601P None Single 135°F (57°C)Fixed-Temperature/Rate-of-Rise 50 ft. x 50 ft. (15.24 m x 15.24 m)5602Lettering Single 194°F (90°C)Fixed-Temperature/Rate-of-Rise 50 ft. x 50 ft. (15.24 m x 15.24 m)5603Lettering Single 135°F (57°C)Fixed-Temperature 25 ft. x 25 ft. (7.62 m x 7.62 m)5604Lettering Single 194°F (90°C)Fixed-Temperature 25 ft. x 25 ft. (7.62 m x 7.62 m)5621Lettering Dual 135°F (57°C)Fixed-Temperature/Rate-of-Rise 50 ft. x 50 ft. (15.24 m x 15.24 m)5622Lettering Dual 194°F (90°C)Fixed-Temperature/Rate-of-Rise 50 ft. x 50 ft. (15.24 m x 15.24 m)5623Lettering Dual 135°F (57°C)Fixed-Temperature 25 ft. x 25 ft. (7.62 m x 7.62 m)5624Lettering Dual 194°F (90°C)Fixed-Temperature 25 ft. x 25 ft. (7.62 m x 7.62 m)NOTE: Refer to NFPA 72 guidelines for spacing reductions when ceiling heights exceed 10 feet (3.048 m).* Add an “A” to part number for ULC model .Single-Circuit ModelsDual-Circuit Models6931wir1.wmf6931wir2.wmf。
石油密度自动测定仪(中英文说明3)
石油密度自动分析仪使用说明书泰州市奥普特分析仪器有限公司TaiZhou City AoPuTe Analysis Instruments Co. Ltd.Chapter III Equipment and proceduredescriptionsTest operations Description:Step one: open airTotal gas cylinder valve turn half a turn, valve opening pressure itto 75~85kPa(0.075~0.085mPa).Step two: onlineOpen the power switch on the side of the instrument, then clickthe SKM-1 -software icon . (Note: the first, and then open software)The third step: calibration( Note: when manipulating the sample tubes, please wear gloves to prevent hand temperature effects on the test) According to the sample, the selection of the appropriate sample tubing. (Fewer samples, select a small sample tube; amount of samples, select medium or large sample tube),Tube installed in the test sample. Align the nozzle and test sample interface, left-handed wild card and pushed up right push the sample tube from the Middle upwards, let go of the left hand sleeve automatically locking (when taken above). Click in the software , enter andclick .When the test is finished, automatically save data for a week.(Note: the recommended disposable sample tubes all volume testing, labels, tests can be directly used in the future will no longer test the air traffic volume, after testing you can omit this step)The fourth step: zhuangyang( Note: when manipulating the sample tubes, please wear gloves to prevent hand temperature effects on the test)To get the specimen to be measured in the sample tube and then put to the test, installation method and measuring air traffic volume.Fifth step: testingA True density test1,click on the configuration run project , enter and click"configuration works" , in the settings window, enter"sample number" and "sample quality," install sample tube,click , and then click And automaticsample volume measurement instrument, specific gravity,eventually automatic translation into standard density (20℃) 2,determination of completion of real-time data can be automatically printed in the background, the measured data and automaticallysaves a week, available for future reference.The sixth step: shutdown, turn off gasClick on the left corner of the software "menu", "exit", then power off the instrument; close the cylinder valve to tighten, closing the valve to loosen.第三章仪器操作步骤简介测试操作简介：第一步：开气气体钢瓶总阀门打开半圈，减压阀打开使其压力到75～85kPa（0.075～0.085mPa）。
FE1901W-DU中文资料
Short Form Catalog 2008Liquid Crystal DisplaysFull Line of Displays:p-Si and a-Si Technology Small TFT Color MonitorsLarge and Medium TFT Color ModulesIntelligent LCD Graphic Displays Intelligent LCD Alphanumeric DisplaysPanel/Segment Displays Film Super Twist NematicSuper Twist Nematic720 Palomar Avenue Sunnyvale, CA 94085Tel: 408.523.8200 Fax: 408.733.1287Email: sales@Precision Custom Enhancements:Anti-Reflective Films High-Bright Backlights White LED BacklightsHeatersInterface CardsInvertersCabling元器件交易网Color TFT Monitors (includes CCFL backlight, inverter and control circuitry; *Control circuitry includes integrated DC-AC inverter to drive CCFL backlight.)Part Number Screen Diagonal (inches)Pixel Count W x H Brightness Nits (cd/m 2)Pixel Pitch (mm)W x H Active Area (mm)W x H Overall Dimension (mm)W x H x D Driving Voltage (V)Input SignalANDpSi020TD-LED 2.0320 x 2402500.053 x 0.15940.67 x 30.4846.1 x 40.96 x 2.5312.0NTSC, PAL AND-TFT-25XS-LED 2.5160 x 2342500.1025 x 0.16349.68 x 37.4460.6 x 48.4 x 3.4512.0NTSC, PAL ANDpSi025TD-LED 2.5320 x 2402500.053 x 0.15950.91 x 38.1661.7 x 44.5 x 2.6812.0NTSC, PAL AND-TFT-35PA 3.5160 x 2342500.149 x 0.22571.6 x 52.784 x 69 x 712.0*NTSC, PAL AND-TFT-35XS-LED 3.5320 x 2342500.074 x 0.22571.6 x 52.6583.5 x 63.1 x 3.612.0NTSC, PAL AND-TFT-35PA-4HB 3.5160 x 2341,5000.149 x 0.22571.6 x 52.784 x 69 x 912.0NTSC, PAL AND-TFT-35VX 3.5640 x 4802100.1125 x 0.109572 x 52.5684.25 x 65.40 x 3.45 5.0VGA, NTSC, PAL AND-TFT-5PA 5.0320 x 2344000.107 x 0.319102.7 x 74.5127 x 93 x 13 12.0*NTSC/PAL AND-TFT-5PA-DHB 5.0320 x 2345000.32 x 0.32102.7 x 74.5127 x 93 x 13 12.0*NTSC/PAL AND-TFT-5TS 5.0320 x 2343500.107 x 0.319102.7 x 74.5119 x 91 x 7.512.0NTSC/PAL, VGA AND-TFT-5TS-DHB 5.0320 x 2345000.107 x 0.319102.7 x 74.5119 x 91 x 7.512.0NTSC/PAL, VGA AND-TFT-5VX 5.0640 x 4804000.156 x 0.15974.88 x 101.7691.4 x 119.3 x 7.912.0VGA, NTSC, PAL AND-TFT-5VX-4HB 5.0640 x 4801,0000.156 x 0.15974.88 x 101.7691.4 x 119.3 x 7.912.0VGA, NTSC, PAL AND-TFT-64PA 6.4320 x 2343300.135 X 0.416129.6 x 97.3156.3 x 120 x 14.312.0*NTSC/PAL AND-TFT-64PA-DHB 6.4320 x 2345000.135 x 0.416129.6 x 97.3156.3 x 120 x 14.312.0*NTSC/PAL AND-TFT-7WX 7.0800 x 4804000.190 x 0.190152.4 x 91.44165 x 104 x 6.212.0NTSC/PAL AND-TFT-8PA8.0480 x 4683500.112 x 0.252161.28x117.936172.4 x 132.0 x 6.612.0NTSC/PALNote 1: VGA =640 x 480 resolution; SVGA =800 x 600 resolution; XGA =1024 x 768 resolution Note 2:6bit=256K colors 8bit=16.2M colors Note 3: Wide Viewing angle displayColor TFT Modules (includes CCFL backlight)Part NumberScreen Diagonal (inches)Pixel Count (1)W x H Brightness Nits (cd/m 2)Pixel Pitch (mm) W x HActive Area (mm) W x HOverall Dimension (mm)W x H x DDriving Voltage (V)Input Signal (2)Poly-Silicon Color TFT Displays (denoted in part number as pSi meaning a higher definition and more durable than amorphous silicon)ANDpSi056ET0S-HB 5.61024 x 6002500.120 x 0.120122.88 x 72141.8 x 84.4 x 7.5 3.3LVDS 6-bit interface ANDpSi08C351-HB 8.4800 x 6003500.213 x 0.213170.4 x 127.8200 x 150 x 123.3Digital 6-bit interface ANDpSi089C362S 8.91024 x 6002500.1905 x 0.1890195.07 x 113.40219.5 x 134.5 x5.2 3.3LVDS 6-bit interface ANDpSi089C362S-4HB 8.91024 x 6008000.1605 x 0.1890195.07 x 113.40219.5 x 134.5 x 8.4 3.3LVDS 6-bit interface ANDpSi104EA5S-HB 10.41024 x 7681800.2055 x 0.2055210.4 x 157.8242 x 172 x 6 3.3LVDS 6-bit interface ANDpSi104EA5S-4HB 10.41024 x 7681,0000.2055 x 0.2055210.4 x 157.8238 x 173 x 15 3.3LVDS 6-bit interface ANDpSi121EC5S-HB 12.11024 x 7682500.24 x 0.24245.76 x 184.32261.0 x 199.0 x 5.03.3LVDS 6-bit interface ANDpSi121GA0S-HB 12.11024 x 7683500.24 x 0.24245.8 x 184.3278 x 209 x 123.3LVDS 6-bit interface Amorphous-Silicon Color TFT DisplaysAND050VL-LED 5.0640 x 4804500.159 x 0.156101.76 x 74.88120.7 x 92.8 x 12.5 5.0LVDS 6-bit interface AND064VT4N1-HB 6.4640 x 4804000.203 x 0.203129.6 x 97.4175 x 127 x 13 5.0Digital 6-bit interface AND064VT5N1-WVHB 6.4640 x 4803500.203 x 0.203129.6 x 97.4175 x 127 x 13 5.0Digital 6-bit interface AND065A041F-HB2 6.5640 x 4804000.207 x 0.207132.48 x 99.36153 x 118 x 11 3.3Digital 6-bit interface AND10C210-HB 10.4640 x 4804000.33 x 0.33211.2 x 158.4265 x 189 x 14 5.0Digital 6-bit interface AND10C210-DHB 10.4640 x 4805000.33 x 0.33211.2 x 158.4265 x 189 x 14 5.0Digital 6-bit interface AND10C210-4HB 10.4640 x 4801,0000.33 x 0.33211.2 x 158.4265 x 189 x 14 5.0Digital 6-bit interface AND12C285-DHB 12.1800 x 6005000.3075 x 0.3075246.0 x 184.5290 x 220 x 15 5.0Digital 6-bit interface AND12C285-4HB12.1800 x 6008500.3075 x 0.3075246.0 x 184.5290 x 220 x 175.0Digital 6-bit interfaceIntelligent Alphanumeric STN DisplaysAll use Hitachi HD44780 controllers or equiv. All displays have 6:00 viewing angle For extended temp. & electroluminescent backlight options, contact factoryPart NumberLines x CharactersCharacter Size (mm) W x HViewing Area (mm) W x HOutline Dimensions (mm) W x H x DDriving Voltage(V)Built-in ControllerBacklightAND081GST 1 x 8 4.45 x 8.3548.0 x 13.060 x 36 x 105HD44780–AND081GST-LED 1 x 8 4.45 x 8.3548.0 x 13.060 x 36 x 135HD44780LED AND082GST 2 x 8 2.96 x 5.5638.0 x 16.058 x 32 x 8.45HD44780–AND082GST-LED 2 x 8 2.96 x 5.5638.0 x 16.058 x 32 x 12.85HD44780LED AND671GST 1 x 16 3.07 x 6.5664.5 x 13.880 x 36 x 11.35HD44780–AND671GST-LED 1 x 16 3.07 x 6.5664.5 x 13.880 x 36 x 165HD44780LED AND471GST 2 x 16 4.84 x 9.6699 x 24122 x 44 x 11.35HD44780–AND471GST-LED 2 x 16 4.84 x 9 .6699 x 24122 x 44 x 15.85HD44780LED AND481GST 2 x 16 2.78 x 4.8962 x 1685 x 30 x 10.15HD44780–AND481GST-LED 2 x 16 2.78 x 4.8962 x 1685 x 30 x 15.8 5HD44780LED AND491GST 2 x 16 2.95 x 4.3564.5 x 13.880 x 36 x 11.35HD44780–AND491GST-LED 2 x 16 2.95 x 4.3564.5 x 13.880 x 36 x 15.85HD44780LED AND731GST 4 x 16 2.95 x 4.7562 x 25.687 x 60 x 8.85HD44780–AND731GST-LED 4 x 16 2.95 x 4.7562 x 25.687 x 60 x 12.75HD44780LED AND501GST 2 x 20 3.2 x 5.5583 x 18.6116 x 37 x 11.35HD44780–AND501GST-LED 2 x 20 3.2 x 5.5583 x 18.6116 x 37 x 15.85HD44780LED AND501WGST 2 x 20 3.2 x 5.5583 x 18.6116 x 37 x 15.85HD44780–AND501WGST-LED 2 x 20 3.2 x 5.5583 x 18.6116 x 37 x 15.85HD44780LED AND721GST 4 x 20 2.95 x 4.7576 x 25.298 x 60 x 125HD44780–AND721GST-LED 4 x 20 2.95 x 4.7576 x 25.298 x 60 x 165HD44780LED AND771GST 2 x 24 3.2 x 5.5094.5 x 17.8118 x 36 x 11.35HD44780–AND771GST-LED 2 x 24 3.2 x 5.5094.5 x 17.8118 x 36 x 15.85HD44780LED AND591GST 2 x 40 3.2 x 5.55154 x 15.3182 x 33.5 x 8.85HD44780–AND591GST-LED 2 x 40 3.2 x 5.55154 x 15.3182 x 33.5 x 12.75HD44780LED AND791GST 4 x 40 2.78 x 4.89149 x 29.5190 x 54 x 8.85HD44780–AND791GST-LED4 x 402.78 x 4.89149 x 29.5190 x 54 x 135HD44780LEDIntelligent Graphic Displays (STN, FSTN, BST) See Notes on top of page 4Part NumberPixel Count W x HPixel Pitch (mm) W x HViewing Area (mm) W x HOverall Dimension (mm) W x H x DDriving Voltage (V)Built-In ControllerBacklight Contrast Ratio-30-ELAND1021ST-EO 120 x 640.56 x 0.6062.5 x 43.5 85 x 70 x 20 +5/-8.5T6963C -EL 4:1AND1021ST 120 x 640.56 x 0.6062.5 x 43.585 x 70 x 20 +5/-8.5T6963C -- 4:1AND1264GST-LED 128 x 640.52 x 0.5272.0 x 40.087 x 70 x 12.7+5T6963C LED 7:1AND1391ST-EO 128 x 1280.43 x 0.4362 x 6284.4 x 100 x 14 +5/-14.5T6963C -EL 4:1AND1391ST 128 x 1280.43 x 0.4362 x 6284.4 x 100 x 14 +5/-14.5T6963C -- 4:1AND1013ST-EO 160 x 1280.60 x 0.60101 x 82129 x 104.5 x 14 +5/-8.5T6963C -EL 4:1AND1013ST-30160 x 1280.60 x 0.60101 x 82129 x 104.5 x 14 +5/-8.5T6963C -30- 4:1AND711AST-EO 240 x 640.53 x 0.53132 x 39180 x 65 x 12 +5/-8.5T6963C -EL 4:1AND711AST-30240 x 640.53 x 0.53132 x 39180 x 65 x 12 +5/-8.5T6963C -30-4:1AND1781BST 240 x 640.53 x 0.53127.2 x 33.9180 x 70 x 14+5/-12.2T6963C CCFL 6:1AND1781BST2240 x 640.53 x 0.53127.16 x 33.9180 x 65 x 9.7+5/-12.2T6963C CCFL 6:1AND1781MST 240 x 640.53 x 0.53127.2 x 33.9180 x 70 x 14+5/-13.0T6963C CCFL 12:1AND1741MST 240 x 1280.50 x 0.50126 x 70170 x 106 x 14+5/-18.5T6963C CCFL 12:1AND1743FST-T 240 x 1280.50 x 0.50132 x 76170 x 102 x 14+5/-19.5T6963C CCFL 6:1AND1742MST2240 x 1280.51 x 0.51134 x 76180 x 110 x 15.1+5RAIO CCFL 6:1AND3222MST2320 X 2400.36 X 0.36120 X 92148 X 120 X 20.5+5/-22.0SED1330CCFL6:1LCD – Panel/Segment Displays (Wide T emperature & High Humidity)Backlight viewing mode designation is:•DU for “reflective” surface to reflect ambient light back through the liquid crystal materials for illumination.•EU for “transflective” surface which uses a partially reflecting surface for viewing with a backlight or using reflected light.•Example: T o receive a 0.5-inch high, 4-digit, wide temperature, high humidity, reflective panel display, order: FE202+W-DU = FE0202W-DU•“30” means that the LCD has a transflective reflector. Part would be ordered with a “-30” suffix. (i.e. AND1013ST -30)•“EO” means that an electroluminescent panel is installed in the LCD. Order with the “EO” suffix. (i.e. AND1013ST -EO)•CCFL means that a cold cathode fluorescent lamp is installed in the module•“MST” means Film Super Twist Nematic (FSTN)•“BST” means Blue Mode Super T wist Nematic LCDNotes for the Intelligent Graphic DisplaysPurdy ElectronicsThe Design Engineer’s Source for High Quality Component SolutionsThe mission of Purdy Electronics Corporation is to provide our original equipment manufacturer (OEM) customers with the highest quality electronic components at competitive prices, supported with superior customer and technical service and value added enhancements.Purdy Electronics has been providing electronic components to OEMs for over 75 years. We specialize in manufacturing a limited number of product lines including:Fans and BlowersLight Emitting DiodesLiquid Crystal Display ProductsRotary and Thumbwheel SwitchesFiber Optic Components andCable Assemblies。
泰勒顿组件产品目录索引说明书
SK9458
N/A
SK9459
Thompson Components
SK9459
Thomson
SK9460
Thomson
SK9461
Thompson Components
SK9461
Thomson
SK9462
Thomson
SK9463
Thompson Components
SK9463
Thomson
SK9464
SK9478
Thompson Components
SK9478
Thomson
SK9479
Thompson Components
SK9479
Thomson
SK9480
Thompson Components
ห้องสมุดไป่ตู้
SK9480
Thomson
SK9481
Thompson Components
SK9481
Thomson
SK9474
Thompson Components
SK9474
Thomson
SK9475
Thompson Components
SK9475
Thomson
SK9476
Thompson Components
SK9476
Thomson
SK9477
Thompson Components
SK9477
Thomson
Bipolar Transistor Selection Guide /SK9466-datasheet.html QUOTE
Si NPN Power HF BJT
/SK9466-datasheet.html QUOTE
实验室常见仪器中英文对照表
实验室常见仪器中英文对照表量杯measuring cup烧杯beaker量筒measuring flask/measuring cylinder量筒graduated flask/measuring cylinder坩埚crucible坩埚钳crucible clamp坩埚crucible pot, melting pot试管test tube试管架test tube holder漏斗funnel分液漏斗separatory funnel烧瓶flask 锥形瓶conical flask塞子stopper洗瓶plastic wash bottle滴定管burette玻璃活塞stopcock冷凝器condenser试剂瓶reagent bottles玻棒glass rod搅拌棒stirring rod蒸馏烧瓶distilling flask碘量瓶iodine flask表面皿watch glass蒸发皿evaporating dish容量瓶volumetric flask/measuring flask 移液管(one-mark) pipette刻度移液管graduated pipettes称量瓶weighing bottle吸液管pipette滤管filter天平balance/scale分析天平analytical balance台秤platform balance游码crossbeams and sliding weights 酒精灯alcohol burner酒精喷灯blast alcohol burner搅拌装置stirring device洗耳球rubber suction bulb研磨钵mortar研磨棒pestle玛瑙研钵agate mortar瓷器porcelain白细口瓶flint glass solution bottle with stopper 滴瓶dropping bottle小滴管dropper蒸馏装置distilling apparatus蒸发器evaporator升降台lab jack铁架台iron support万能夹extension clamp蝴蝶夹double-buret clamp双顶丝clamp regular holder止水夹flatjaw pinchcock圆形漏斗架cast-iron ring移液管架pipet rack试管架tube rack沸石boiling stone橡胶管rubber tubing药匙lab spoon镊子forceps坩埚钳crucible tong剪刀scissor打孔器stopper borer石棉网asbestos-free wire gauze电炉丝wire coil for heater脱脂棉absorbent cottonphph试纸universal ph indicator paper滤纸filter paper称量纸weighing paper擦镜纸wiper for lens秒表stopwatch量杯glass graduates with scale白滴定管（酸）flint glass burette with glass stopcock棕色滴定管（酸）brown glass burette with glass stopcock 白滴定管（碱）flint glass burette for alkali棕色滴定管（碱）brown glass burette for alkali比重瓶specific gravity bottle水银温度计mercury-filled thermometerph计ph meter折光仪refractometer真空泵vacuum pump冷、热浴bath离心机centrifuge口罩respirator防毒面具respirator、gasmask磁力搅拌器magnetic stirrer电动搅拌器power basic stirrer烘箱oven闪点仪flash point tester马弗炉furnace电炉heater微波炉电热套heating mantleAging Property Tester 老化性能测定仪Amino Acid Analyzer 氨基酸组成分析仪Analyzer for Clinic Medicine Concentration 临床药物浓度仪Atomic Absorption Spectroscopy 原子吸收光谱仪Atomic Emission Spectrometer 原子发射光谱仪Atomic Fluorescence Spectroscopy 原子荧光光谱仪Automatic Titrator 自动滴定仪Basic Physics 基本物理量测定Biochemical Analyzer 生化分析仪Biochemicalanalysis 生物技术分析Bio-reactor 生物反应器Blood-gas Analyzer 血气分析仪Centrifuge 离心机ChemiluminescenceApparatus 化学发光仪CHN Analysis 环境成分分析仪CO2 Incubators CO2培养箱Combustion PropertyTester 燃烧性能测定仪Conductivity Meter 电导仪Constant Temperature Circulator 恒温循环泵Direct Current Plasma Emission Spectrometer 直流等离子体发射光谱仪DNA Sequencers DNA测序仪DNA synthesizer DNA合成仪Electrical Property Tester 电性能测定仪Electro Microscopy 电子显微镜Electrolytic Analyzer 电解质分析仪Electron Energy Disperse Spectroscopy 电子能谱仪Electron Paramagnetic ResonanceSpectrometer 电子顺磁共振波谱仪Electrophoresis 电泳Electrophoresis System 电泳仪ELIASA 酶标仪Energy Disperse Spectroscopy 能谱仪Fermenter 发酵罐Flow Analytical and Process AnalyticalChemistry 流动分析与过程分析Fraction Collector 部分收集器FreezeDrying Equipment 冻干机FT-IR Spectrometer 傅里叶变换红外光谱仪FT-Raman Spectrometer 傅里叶变换拉曼光谱仪Gas Analysis 气体分析Gas Chromatograph 气相色谱仪GC-MS 气相色谱-质谱联用仪Gel PermeationChromatograph 凝胶渗透色谱仪HighPressure/Performance Liquid Chromatography 高压/效液相色谱仪Hybridization Oven 分子杂交仪ICP-MS ICP-质谱联用仪Inductive Coupled Plasma Emission Spectrometer 电感偶合等离子体发射光谱仪Instrument for Nondestructive Testing 无损检测仪Instrument for Polymerase Chain Reaction PCR仪Inverted Microscope 倒置显微镜Ion Chromatograph 离子色谱仪Isotope X-Ray Fluorescence Spectrometer 同位素X荧光光谱仪LC-MS 液相色谱-质谱联用仪Mass Spectrometer 质谱仪Mechanical Property Tester 机械性能测定仪Metal/material elemental analysis 金属/材料元素分析仪Metallurgical Microscopy 金相显微镜Microwave Inductive Plasma Emission Spectrometer 微波等离子体光谱仪Nuclear Magnetic Resonance Spectrometer 核磁共振波谱仪Optical Microscopy 光学显微镜Optical PropertyTester 光学性能测定仪Other/Miscellaneous 其他Particle Size Analyzer 粒度分析仪PCR Amplifier PCR仪Peptide synthesizer 多肽合成仪pH Meter pH计PhysicalProperty Analysis 物性分析Polarograph 极谱仪Protein Sequencer 氨基酸测序仪Rheometer 流变仪Sample Handling 样品处理Scanning Probe Microscopy FG|8oU 扫描探针显微镜Sensors 传感器Sequencers and Synthesizers for DNA and Protein DNA及蛋白质的测序和合成仪Shaker 摇床Size Exclusion Chromatograph 体积排阻色谱Surface Science 表面科学SurfaceAnalyzer 表面分析仪Thermal Analyzer 热分析仪Thermal Physical Property Tester 热物理性能测定仪Ultrahigh Purity Filter 超滤器Ultra-low Temperature Freezer 超低温冰箱Ultrasonic Cell Disruptor 超声破碎仪Ultraviolet Detector 紫外检测仪UltravioletLamp 紫外观察灯Urine Analyzer 尿液分析仪UV-Visible Spectrophotometer 紫外-可见光分光光度计Viscometer 粘度计Voltammerter 伏安仪Water Test Kits 水质分析仪X-Ray Fluorescence Spectrometer X射线荧光光谱仪X-RayDiffractomer X射线衍射仪一、化学试剂1、氨基酸alanine (Ala, A)丙氨酸valine (Val, V)缬氨酸生物leucine (Leu, L)亮氨酸isoleucine (Ile,I)异亮氨酸proline (Pro, P)脯氨酸phenylalanine (Phe, F) 苯丙氨酸tryptophan (Trp, W) 色氨酸methionine (Met, M) 蛋氨酸glycine (Gly, G)甘氨酸serine (Ser, S)丝氨酸threonine (Thr, T)苏氨酸cysteine (Cys, C)半胱氨酸。
艾顿绿色电气液氢产品介绍说明书
XIRIAAutomotiveAerospaceElectricalTruckHydraulicsAutomotive Aerospace Electrical Truck Hydraulics Poweringbusiness worldwideEaton delivers the power inside hundreds of products that are answering the demands of today’s fast changing world. We help our customers worldwide manage the power they need for buildings, aircraft, trucks, cars, machinery and entire businesses. And we do it in a way that consumes fewer resources.Next generationtransportationEaton is driving the development of newtechnologies – from hybriddrivetrains and emission control systems to advanced engine components – that reduce fuel consumption and emissions in trucks and cars. Higher expectationsWe continue to expand our aerospace solutions andservices to meet the needs of new aviation platforms,including the high-flying light jet and very light jet markets. Building on our strengths Our hydraulics businesscombines localised service and support with an innovative portfolio of fluid powersolutions to answer the needs of global infrastructure projects, including locks, canals and dams.Powering Greener Buildings and BusinessesEaton’s Electrical Group is a leading provider of powerquality, distribution and control solutions that increase energy efficiency and improve power quality, safety and reliability. Our solutions offer a growing portfolio of “green” products and services, such as energy audits and real-time energy consumption monitoring.Eaton’s Uninterruptible Power Supplies (UPS), variable-speed drives and lighting controls help conserve energy and increase efficiency.1Eaton’s range ofSF6free switchgear for Medium Voltage Eaton Corporation is a worldwide leader in the design, manufacture, and sale of safe, reliableand high-performance medium voltage power distribution equipment in accordance with IEC,ANSI and GB / DL standardsComplete Global Medium Voltage Switchgear Solutions Eaton, a premier leader in designing and manufacturing power distribution and protection equipment in the electrical industry, offers a comprehensive range of medium voltage (MV) solutions to meet the needs of virtually every application. From products that feature cutting-edge design that allow for easy access, maintenance and space savings, to arc-resistant products that enhance safety, Eaton’s medium voltage solutions provide a variety of products for every need. Additionally, Eaton’s global service network provides maximum customer support in all regions of the world.As one of the few completely vertically integrated and diversified industrial manufacturers in the world, Eaton designs not only MV assemblies, but also the key components that comprise the MV solutions – from steel housing and circuit breaker compartments to vacuum interrupters, circuit breakers, bus systems and fuses. Eaton’s MV heritage, strengthened by acquisitions such as Westinghouse DCBU, Cutler Hammer, MEM and Holec, has resulted in breakthrough MV technologies and numerous international patents over the years.Part of Eaton’s complete electrical PowerChain Solutions–which help businesses minimize risks while realizing greater reliability, cost efficiencies, capital utilization and safety – Eaton’s medium voltage equipment meets all applicable standards and certifications such as IEC, NEMA / ANSI, GB / DL, UL, IEEE, KEMA and CSA.When it comes to medium voltage solutions, you can trust theone name with a long history of proven performance: Eaton.XIRIA green gas insulated RMUProduct FeatureGreen, Smart, Compact solution: XIRIA XIRIA is Eaton’s new generation of environmental-friendly type green gas insulated Ring Main units.They are characterized by their high level of operational safety and applicable for 12kV power distribution system.XIRIA units are also very compact and can provide modular single anel and combination block panel.Both the primary and mechanical parts are housed in a fully sealed stainless steel tank with 0.02Mpa dry air which effectively protects the system against environmental influences.Two basic function versions in our product range:a vacuum load break switch for ring cable connectionsa vacuum circuit breaker for protecting transformers and cableconnections.Both versions can be supplied in a unit in any desired combination and order.XIRIA is a well designed environmental-friendly Ring Main Units. For example, when developing the system we intentionally opted for protection in the form of a circuit breakercombined with an electronic relay. This is a modern, safe andflexible alternative to fuse protection.In addition it also makes Xiria very easy to use in an automated distribution network. These specific features make Xiria aneasy-to-use system that responds perfectly to changing electricity distribution requirements, both now and in the future. Green and cleanXiria is made exclusively of environmentally-friendlymaterials. The insulation medium is clean, dry airand the switching medium is vacuum. Thus Xiriaresponds to the demand for sustainability in energydistribution. The unit is easy to dismantle at the endof its service life as the materials used are clearlylabelled and can be reused. This facilitates recyclingand avoids excessive costs and environmentaltaxes when the unit is decommissioned.3XIRIA green gas insulated RMUMaintenance-freeAll the live primary parts and mechanisms in a Xiria unit are installed in a fully enclosed housing. This prevents dust,moisture and other environmental influences from affecting the operation of the unit. The switching mechanism has been designed with a minimum number of parts, and is specifically intended for switching after a long period ofinactivity – precisely the way it happens in practice. What is more, the mechanism does not use any lubricants, which also benefits its operationalsafety. As it is maintenance-free, Xiria significantly cuts inspection and maintenance costs without adversely affecting the operational safety of your distribution network. Which is something to look forward to in today’s liberalised energy market.Intrinsically safeWhen carrying out operational actions and work on the cables, it is vital to have unambiguous status indications.When it comes to the safety of the operatingpersonnel, Eaton leaves nothing to chance. That is why Xiria is fitted with directly visible isolation by means of inspection windows in the front which makes the isolating distance between the cable and the busbar system directly visible. A visible,short-circuit proof earthing can take place via theload break switch or circuit-breaker.Energized position Isolation postion Earthed positionXiria is designed with a fully sealed stainless steel housing combined with 0.02Mpa dry air of all primary live parts. Thisreduces the risk of an internal fault to an absolute minimum, thus providing a high degree of safety and availability. The tested arc-proof housing also offers additional protection for operating personnel.1.Busbar system2.three-position disconnector3.Vacuum load break switch or circuit breaker4.Voltage indicator5.Cable connection4XIRIA green gas insulated RMUCompactXiria is one of the smallest ring main units of itskind. This high degree of compactness is a directresult of the combination of technologies used byEaton – electrical field control and the use ofextremely compact vacuum interrupters. Thiscompactness offers direct financial benefits in newbuildings and when refurbishing existingtransformer stations because of the minimal floorarea required.Extensible designFocusing to the requirements towards metering panels andextensible solutions in markets, modular single panel andextensible plugs are developed on the basis of original products,easy for users to conduct circuit extension and add functions suchas metering.Modular single panel Ready for automated networksXiria is completely ready for use in fully-automatednetworks. There are various options available for thesystem, depending on the level of remote signallingand remote control required. These options aremodular, so they can be quickly and easily added inthe future. In this way Xiria anticipates futuredevelopments in automation and operationalcontrol, so you can be sure that you will not be leftwith control, display and communication standardsthat are too specific or possibly even obsolete.5XIRIA green gas insulated RMUT echnical dataGeneralRated voltage kV 12Impulse withstand voltage kV 75/85Power frequency withstand voltage kV-1m 42/48Rated frequency Hz 50Internal arc resistance (IAC) kA/s AFLR 20/1Partial Discharge pC ≤10（1.1Ur）Protection degree Gas tank IP67Whole panel IP41Green gas (Dry air) Water content≤300ppmRated gas pressure (20℃ gauge) Mpa 0.02Min. function gas pressure (20℃ Gauge) Mpa 0Annual leakage ≤0.05%Busbar system Rated current A 630Rated short-time withstand current kA/s 20/4Rated peak withstand current kA 50Load break switch Rated current A 630Rated short circuit making current kA 50Rated short time current kA/s 20/4Rated cable charging break current A 10Main switch mechanic endurance M2 10000 times3-postion disconnector mechanic endurance M1 3000 timesLoad break switch electrical life E3 200 timesEarthing making (By vacuum interrupter) 5 timesCircuit breaker Rated current A 630Rated breaking current kA 20Rated short circuit making current kA 50Rated cable charging break current A 25Main switch mechanic endurance M2 10000 times3-postion disconnector mechanic endurance M1 3000 timesCircuit breaker electrical life 30 timesRated short time current kA/s 20/4Switching sequence O-180s-CO-180s- CO or O-0.3s-CO-180s- COEarthing making (By vacuum interrupter) 5 times6XIRIA green gas insulated RMUXIRIA StandardsXIRIA type tests are based on below standards：GB 3906-2006 AC metal-enclosed switchgear and control gear for rated voltages from 3.6kV to 40.5kV GB 3804-2004 AC high voltage switches for rated voltages from 3.6kV to 40.5kVGB 1984-2003 AC high-voltage circuit-breakers7XIRIA green gas insulated RMUConfiguration informationOrder informationXIRIA -□ - 12 / 630 - 20Short time currentRated currentRated voltageType C functionType T functionType D functionType B functionType Cv functionType M functionProduct typeLoad break switch panelType C function Standard Options630A vacuum LBS Motor operationThree-position disconnector Fault indicatorVoltage indicator Current transformer and meter630A type C bushing LV compartmentCircuit breaker panelType T function Standard Options630A vacuum CB Motor operationThree- position disconnector Fault indicatorVoltage indicator external auxiliary supply relay630A type C bushing Current transformer and meterProtection CT LV compartmentCT powered relay8XIRIA green gas insulated RMUCable connection panelType D functionStandard Options Voltage indicator Fault indicator630A type C bushing Current transformer and meter Padlock for cable compartmentLV compartmentMetering panelType M panelBus couplerType B functionStandardTwo 0.2s single phase metering PTs Two 0.2s single phase metering CTsLow voltage compartmentOptionsMoisture sensor and heater Electrical locking of energized HV compartment Voltage meterStandard 630A LBSmolded busbar connection Voltage indicatorOptions 630A CB Motor operationCurrent transformer and meters LV compartment9XIRIA green gas insulated RMUDimensionsModular single panelType C Type T Type MCombination block typeType CTCExample for combination：Modular single panel 420*1300*600mm (W*H*D) weight 150kgCombination block type 1120*1300*600mm (W*H*D) weight 350kg10XIRIA green gas insulated RMUFloor planModular single panelCable type: 1X3 35-400mm2 Cable type: 1X3 35-400mm2Circuit breaker(T function)11XIRIA green gas insulated RMU Combination block typeCable cone type: C630 Cable cone type: C630Cable type: 1X3 35-400mm2 Cable type: 1X3 35-400mm2Circuit breaker(T function)12XIRIA green gas insulated RMU Application fieldPower plants Commercial buildingsshopping centersMain feeder stationsPower distribution stationtransformer stationIndustry light industry residential applicationsEaton provides power transmission and distribution products, from generation to supply to the consumer.Eaton electricalEaton provides electrical system solutions designed to ensure a safe, reliable supply of energy. The development and production of its systems and components is based on the concept that they should always yield clear value-added for the customer. The products are designed in such as way that they can be fully integrated into their application. This approach enables you to achieve almost any solution you want with Eaton products. Medium voltage businessEaton’s medium voltagebusiness focus primarily onpower distribution and industrysystems. All Eaton systems arefitted with circuit breakers withEaton manufactured vacuuminterrupters. These high-techsystems are not only safe tooperate, but areenvironmentally friendly as well.Y our total partnerIn addition to the productsalready mentioned, Eaton canalso provide key solutions. Wecan call upon a large number ofspecialists in all the requireddisciplines for this purpose.Working closely together withyour organization and yourselected partners, Eaton canhandle your entire project fromstart to finish. In doing so, weoffer you simplicity andconvenience you would expectfrom an experienced partner. 13Eaton is a power management company with 2017 sales of $20.4 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 96,000 employees and sells products to customers in more than 175 countries. For more information, visit.Eaton CorporationNo.3, Lane 280, Linhong Road,Changning District,Shanghai, China 200335/electrical© 2018 Eaton Corporation Eaton is a registered trademarkAll Rights Reserved of Eaton Corporation.Printed in ChinaCHICA0101005_EN All trademarks are property of theirMay 2018 respective owners.。
迪莱克特 Pitot-静态检测仪系列产品简介说明书
Ground SupportYour success is our concernTo buy, sell, rent or trade-in this product please click on the link below:/TIC-Tel-Instruments-TB-2100-transponder-DME-Mode-S-Test-Set.aspx> Ideal for flightline calibration checks and troubleshooting > Performs precision Pitot-Static leak tests> Two-instrument combination with optional ranges > Correction cards for all analog instruments > Fully portable and self-contained(No electric or external pressure sources needed)> Lightweight plastic case for portability1811D Pitot static> Compact fiberglass case allows unit to fit in tight quarters > Performs on board instrument calibration checks > Performs precision Pitot-Static leak tests> Three-instrument capability for analog units with optional ranges> Correction cards for all analog instruments> Operates from 115/230 VAC 50-400 Hz (1811HA)> Fully portable, self-contained(No electric or external pressure sources required)> Vacuum & pressure hand pumps installed on both models (1811GA & 1811HA)1811GA-1811HA Pitot static> Transducer Technology provides the highest accuracy and best long-term stability available for line maintenance equipment> Menu-driven operator interface provides protection of instruments under test with programmable limits on the following parameters: • Altitude (feet or meters) • Airspeed (knots or km/hr)• Rate of Climb (ft/min or m/min) • Mach (mach)> Leak testing mode displays leak rates in ft/min, knots/min and metric equivalent units> Meets .0030 inHg accuracy on static channelDPS350w w w .b a r fi e l d i n> Fully automated unit > Handheld remote control> Database capable of saving the limit data of up to thirty different aircraft and stored in a battery backed memory> GO TO GROUND feature automatically and safely depressurizes both systems to ambient pressure > Compatible with any Centronics standard parallel interface printer of 80 or 132-column width> PC programmable via RS 232 using optional Test Program Manager (TPM) software kit > Available with an IEEE 488 Connector> Meets .0030 inHg accuracy on static channelDPS500> Three independent pressure control channels for altitude, air speed and angle of attack> High accuracy resonant silicon sensors on all channels > Internal pressure and vacuum generation, high pump reliability> GO TO GROUND feature automatically and safely depressurizes both systems to ambient pressure > Manual or stored test sequence operation> RS232 port for PC control or test data transfer > Limits protection for aircraft instruments> Compact and lightweight for quick and easy portability > Meets .0030 inHg accuracy on static channelADTS 206ADS-B Compliant> ADS-B and TIS Test features> Tests transponder (Modes A, C and S)> Allows simulation of ATCRBS and Mode S Intruders for TCAS testing > Simulates DME distance and velocity> Performs transponder tests required by FAR Appendix F Part 43> Download test data to PC via an RS-232 interface > 2-year limited warranty; 5 & 10-year available> Generates ILS signals to ICAO Annex 10 CAT III precision> Checks VOR, GS, LOC, MB, VHF COMM, Flight Director & Autopilot > Operates in shop, on ramp and in cockpit> Tests antenna-to-antenna or direct connect coax> US and European frequencies with 8.33 kHz channels > Meets requirements of MIL-PRF-28800F > Built-in NICAD battery and charger > 2-year limited warranty> Two independent, non-coherent RF channels for Mode S testing > Tests the latest Mode S Capabilities• Automatic Dependent Surveillance Broadcast (ADS-B) • Extended Squitter• Elementary (ES) and Enhanced Surveillance (EHS) • Traffic Information Systems (TIS)> Color LCD display features wide viewing angle> Touch-sensitive screen allows quick setup of test parameters > Easy to navigate menus require minimal training to operate > Continuous display of critical measurements including power, pulse parameters, percent reply and frequency > 2-year limited warranty> Permits ICAO Annex 10 CAT III ILS ramp check certification > Checks VOR, GS, LOC, MB, Flight Director & Autopilot > Dual VOR/LOC/GS frequencies > Separate and simultaneous MB/ILS > Dual extended-range variable ILS > Easy one-man operation> Fully adjustable functions allowing precise testing and measurements > 2-year limited warranty; 5 & 10-year availableT-30D VOR/ILS/MB Ramp T est SetT-36C Cat III Nav/Comm T est SetTR-220 Multi-Function T est SetTB-2100 ATC/DME T est SetADS-B Compliantw w w .b a r fi e l d i n c.c o mPre-T est Probes>> The pre-testers are employed to verify the integrity of the pitot test adapter, hoses and air data test set prior to connection to the aircraft. The probe is inserted into the pitot test adapter while connected to the hose and air data test set. By applying pneumatic pressure, the entire assembly (tester, hoses & adapters) are checked for leakage.Pitot T est Adapters>> The pitot test adapter body is of solid uni-body construction. There is no metal to metal contact between pitot tube and test adapters. Seals and spacers inside the adapter body ensure a leak free connection. They are easily exchanged withoutspecial tools. Optional high temperature seals and spacers can be installed upon request.Static T est Adapters>> Static test adapters provide a connecting seal at the aircraft’s static ports. The means of attachment depend on the aircraft type.Installation and removal of our adapters takes just seconds.Air Data Accessory Kits>> Air data accessory kits contain all the required test adapters and hoses to connect the air data test set to the aircraft type for which the kit is designed.Also included as standard equipment are pre-test adapters, seal kits and lubrication fluid.Depending on the need, additional equipment such as control consoles and suspension arms are a part of the kit.RVSM Air data accessory kits are available.Cable AdapterP/N 101-00932 and 101-00939For GE Engine CF6-80A, A1 and C2Cable AdapterP/N 101-00933For GE Engine CF6 and CF6-50CT12A Cable tensiometerThe CT12A provides accurate readings in pounds over awide range of cable sizes from 1/16” to 1/4” (US Std).Operating temperatures range from 14°F (-10°C) to 120°F (50°C).> Meets new OEM specificationsw w w .b a r fi e l d in c .c o mTT1000A T urbine temperature test set> Automatically compensates for ambient temperature at test lead connection junction point or indicates cold junction temperature> Thermocouple and lead resistance measurements to 0.01 ohm and insulation measurements up to two (2) megohms > Large, 9mm (0.35”) high character, 3 1/2-digit liquid crystal display with pre-programmed legends> Range: from 0 to 1000º C certified, -60 to 1160º C extended > Measures and displays values of CH/AL thermocouple in terms of degrees Celsius (ºC) temperature> Simulates CH/AL thermocouple with or without simulated system lead resistance> Accuracy: Typical measurement error at ambient (25ºC) less than ± 1ºCP/N 101-00902-908> Calibration device for mounted aircraft compass > Rugged, durable and lightweight > Accurate to within ± 1º> Hand-held and portable> 5-foot monopod support included > Protective carrying case included> Manufactured with lightweight aluminium-alloy > Field tests aircraft fluid pressure systems > Provides for both leak and calibration tests> Pressure source for pressure transducers, warning switches & direct reading pressure gauges > Applicable for shop or line use> No electrical or pneumatic source needed > Analog and digital gauges available> Hand-held, portable, rugged, durable and lightweight> Panel switch selector for 100, 200 and 500 volt test potentials > Push to test probe button activation > Simple forward reading scale > Absolutely no shock hazards > Sensitive operational amplifier > Solid-state circuitrySC063 Sight compass2311FA Pressure tester2471F Megohmmeter> Completely self contained DC capacitance fuelquantity test system> Capability to bench check aircraft fuel quantity system components> Capacitance simulation in the range of 0 to 400 pF with infinite resolution> 4 1/2-digit liquid crystal display> Digital readout of quantity system output in (volts, lbs., ratio, etc.)> Interchangeable aircraft interface modules > Powered from common AA batteries> Provisions for bench-testing of system components > State-of-the-art low battery drain circuitry> Maximum ease of operation and maintenanceDC400AFuel quantity test set>> Aircraft specific modules include:BAe Jetstream 32BAe Jetstream 41 Bell Helicopter 214STBell Helicopter 412SP, 412HP Canadair CL600, CL601Dehavilland DHC8Embraer EMB-120Hawker Beechcraft King Air C-99 & 1900Hawker Beechcraft 125-800Hawker Beechcraft 125-1000Piper Meridian SAAB SF-340Swearingen SJ30-2DC400 adapter modulesThe interchangeable adapter modules customize the DC400A to interface directly with specific aircraft without the need for an external cable.w w w .b a r fi e l din c .c o mDFQ40KFuel quantity test set> Microprocessor based> Completely self contained AC capacitance fuel quantity test system> Measures capacitance, insulation, DC voltage, resistance and distance to fault> Capacitance simulation and indicator testing > Custom multi-line backlit graphic display> Direct keypad entry of Tank and Comp simulation values > Uses all existing fuel quantity cables> Uses new generation of Smart Cables to perform Automated Test Routines> Calibration date available from display with user alerts to approaching calibration date > Numerous user prompts> Powered from common C-cell batteries with auto-off feature to conserve energyAC adapter modulesContrary to popular belief, there is no “black magic” in trouble-shooting and calibrating fuel capacitance systems, but only if you have the right equipment.>> Aircraft modules available for ATR AirbusBell Helicopter Boeing Canadair Casa Cessna Dehavilland EmbraerEurocopter/Aerospatiale/MBB Fairchild Falcon Jet Fokker Gulfstreamaircraft using AC fuel systems include:Hawker Beechcraft (C-90, A100) Beechjet Hawker-Siddeley IAI Learjet LockheedMcDonnell-Douglas\Boeing Mitsubishi Nord Pilatus Piper Rockwell Sikorsky SocataSwearingen> Measurement of voltage delivered by smoke detectors> Measure current circulating on the smoke detectors circuits > C.C Alarm function > On/Off A.L function> Test rack function for tool set self-test > Select 5mA or 400mA range on milliammeter> Activate side stick solenoid to enable the adjustment of transucer unit input lever > Simulate auto pilot mode to check operation of spring rod in artificial feel unit> Models available for A319, A320, A321> Models available for A330, A340> Models available for A340-500-600> Control the rotation direction of the motors> Control the speed of the motors > Check the RPM of the motors > Unit is supplied eith 28VDC and protected by a 5A fuse> Drive motor support drives landing gear tachometer generators means of drive shaftsG5M5M0-113-0000Smoke Detector T est Set> APU & ECU cable interface > Panel meter digital readout > Monitor aircraft signals > Fault simulations> Resistance measurements > Current measurements > GO/NO-GO indications > Self-testAT600A (GTCP85 Series)> APU & ECU cable interface > Panel meter digital readout > Monitor aircraft signals > Electrical loading > Fault simulations> Resistance measurements > GO/NO-GO indications > Battery noise detectionAT300A (GTCP331 Series)> APU cable interface> Panel meter digital readout > Monitor aircraft signals > Fault simulations> Resistance measurements > Pressure measurements > GO/NO-GO indications > Self-testAT100A (GTCP660 Series)G5-5M0-319-0000Main Landing Gear Wheel T achometer Driving T ool28 VDC Power Supply T oolAeroframe Airepairsw w w .b a r fi e l d i n c> Receive OEM designated free mods, including software updates> Dedicated repair shop and customer service team> Highest level of technical knowledge about the equipment > Advanced Cal/Bench Check; Standard System & Component Checks> Latest revision verification on users’ operation manuals > Receive OEM warranty benefits> Outdated operation manuals replaced as neededWhy send your equipment to the OEM?With the OEM you receive additional benefits and extras that other calibration shops are unable to provide such as: > Transducer technology (No more blown instruments)> Virtually immune to overpressure damage > One-button leak test feature > DAS650 displays Airspeed.> Mach displayed when coupled with the DALT55 > DALT55 displays Altitude and VSI simultaneously > 1-year calibration cycle (OEM suggested cycle)> Rechargeable battery pack> Battery power level displayed on main screen > Backlit for nighttime operation > No correction cards neededDigital retrofit serviceCONTACT US: 4101 NW 29th Street Miami, FL 33142 USA。
北极工具-Ultra-Tow XTP系列自动锁定A框拖车耦合器说明书
Auto Locking A-Frame Trailer Coupler14,000-Lb. CapacityOwner’s ManualWARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.Item #54549Thank you very much for choosing an Ultra-Tow XTP Series™ product! For future reference, please complete the owner’s record below:Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.This coupler is designed for certain applications only. Northern Tool and Equipment is not responsible for issues arising from modification or improper use of this product such as an application for which it was not designed. We strongly recommend that this product not be modifiedand/or used for any application other than that for which it was designed. For technical questions, please call 1-800-222-5381.Intended Use (4)Technical Specifications (4)Important Safety Information (4)Specific Operation Warnings (5)Towing (6)Installation Instructions (6)Before Each Use (6)Operating Instructions (7)After Each Use (9)Maintenance (9)Troubleshooting (10)Parts Diagram (11)Parts List (12)Replacement Parts (12)Limited Warranty (13)The Ultra-Tow XTP Series Auto Locking A-Frame Trailer Coupler features an auto-locking system with a steel lock assembly. The secondary lock has a safety clip with a hole designed to fit an off-the-shelf padlock without an adaptor. This coupler can be used with any 2 5/16" ball having a capacity rating equal to or higher than the coupler.Weld LocationsWeld the coupler to the front of the trailer tongue. Care must be taken to get good penetration without undercutting the coupler or the tongue. See the illustration below for weld locations.Auto Lock FunctionSecondary LockPrimary LockSafety ClipUnlocked PositionThe illustration shown is in the unlocked position. When the Primary Lock shows no green, the coupler is open.Hitching Up1. Before hitching up, inspect for proper operation and for worn, damaged, or missing parts.2. Unlock the coupler by removing the Safety Clip and insuring that the Primary Lock shows no green, indicating the coupler is open.3. Back the vehicle up to the trailer until 2 5/16" of the ball is located under the coupler (shown above).4. As you lower the coupler onto the ball, the Primary Lock andSecondary Lock will end up in the locked position, as shown.Green means LOCKEDLocked PositionThe illustration shown to the right is in the locked position,with the Safety Clip installed. Be sure the lock assembly is in theunlock position before hook-up.Un-Hitching1. Unlock by removing the Safety Clip. Top Hole Secondary Lock2. Flip the Secondary Lock forward until it is pointing up.Hold this while raising the jack.3. If both hands are needed, the Secondary Lock can beheld by inserting the Safety Clip in the Top Hole whileraising the jack.4. Jack up the coupler until it clears the hitch ball and pull out the Safety Clip. The coupler is now back to the unlock position, as shown in the first illustration.Maintain the coupler hitch by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule.Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance.∙For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. ∙Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.∙When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.∙The distributor reserves the rights to make design changes and improvements to product lines and manuals without notice.Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Ultra-Tow product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of three years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. If the product does not comply with this limited warranty, Your sole and exclusive remedy is that We will, at our sole option and within a commercially reasonable time, either replace the product or product component without charge to You or refund the purchase price (less shipping). This limited warranty is not transferable.Limitations on the WarrantyThis limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a workmanlike manner.Obligations of PurchaserYou must retain Your product purchase receipt to verify date of purchase and that You are the original purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make and model number, and follow the claim instructions that will be provided. The product and the purchase receipt must be provided to Us in order to process Your warranty claim. Any returned product that is replaced or refunded by Us becomes our property. You will be responsible for return shipping costs or costs related to Your return visit to a retail store.Remedy LimitsProduct replacement or a refund of the purchase price is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be liable for: service or labor charges or damage to Your property incurred in removing or replacing the product; any damages, including, without limitation, damages to tangible personal property or personal injury, related to Your improper use, installation, or maintenance of the product or product component; or any indirect, incidental or consequential damages of any kind for any reason.Assumption of RiskYou acknowledge and agree that any use of the product for any purpose other than the specifieduse(s) stated in the product instructions is at Your own risk.Governing LawThis limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or consequential damages, so the above limitations may not apply to You. This limited warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction for any disputes relating to this warranty.Distributed by:Northern Tool & Equipment Company, Inc.Burnsville, Minnesota 55306Made in China。
安全气泡检测器产品说明书
621 Hunt Valley CircleNew Kensington, PA 15068 3015-5744 Tel: 724-334-5000 Revision 1 Fax: 724-334-5001December 2015Battery Replacement Kitfor Portable Area Gas Monitors (PAGMs)Instruction Manual1. ScopeThis instruction manual describes how to replace the battery in your PAGM infrared gas leak detector. It is assumed that the user is familiar with the device. If necessary, refer to the instructions for detailed operation and maintenance information for each PAGM model.WARNING: Failure to comply with these instructions may void the warranty.2. Items Required• Original PAGM instruction manual (optional) •Replacement Battery Kit (3015-5743)o Rechargeable lithium-ion battery (colors may vary) o Cable with 2.1 mm jack (for newer series PAGMs)o Cable with 2.5 mm jack (marked in red, for older series PAGMs) o Battery chargero This instruction manualNOTE: The 2.1 mm and 2.5 mm cables look very similar. For easy identification, the cable with the 2.5 mm plug is marked in red. Note that this cable is used for certain older series PAGMs.Battery Replacement Kit for Portable Area Gas Monitors3. Charging the New BatteryThe lithium-ion battery in your kit will likely be partially charged when you receive it. However, you should fully charge the battery prior to operating the PAGM.Charging4. Replacement ProcedurePreparationRemoving InsertingBattery Replacement Kit for Portable Area Gas Monitors Removing the Old BatterySelecting the Appropriate Battery CableDuring its lifetime, the PAGM has had two unique battery pack connectors:•one that supports a battery cable with a 2.5 mm jack•one that supports a battery cable with a 2.1 mm jack.Your battery replacement kit includes both cables, however, you must determine which cable your PAGM requires. For most PAGMs, this determination can be made based on part number. However, in some cases, you may need to try both cables to determine which is appropriate. The following instructions step you through the determination process.Battery Replacement Kit for Portable Area Gas MonitorsInstalling the New BatteryBattery Replacement Kit for Portable Area Gas MonitorsInserting Removing ValidationEnsure that the battery is powered ON per the instruction label on the battery pack.Verify that the PAGM powers up. You should hear the pump turn on and see the lights on the top of the unit energize.∇∇∇Headquarters621 Hunt Valley Circle, New Kensington, PA 15068-7074Toll Free: 1-800-736-4666 • Tel: +1-724-334-5000 • Fax: +1-724-334-5001Website: • E-mail:********************Printed in U.S.A. ® Registered Trademark of Bacharach Inc.。
美国安迪斯公司产品说明书：非接触速度开关SSW201系列
The SSW switch combines the function of a proximity switch with a timing network. This combination allows for adjustable initial power-up delay and an adjustable low speed setpoint.This initial power-up delay permits the target to accelerate to its normal operating speed. After the initial delay, the output remains energized, provided the object’s speed is above the low setpoint. If the object loses speed, the circuit returns to its non-conductive state.NON-CONTACT SPEED SWITCHESSSW201 Seriesߜ For All Metal Targets ߜ Ideal for Motion Control of Rotating Machinery ߜRugged Construction for Dirty, Humid, Oily or Dusty Applications* Requires external dc power supply such as PSS-D12A , ($114)Comes with complete operator’s manual.Ordering Example: SSW201-SN,non-contact speed switch with NPN output with 6-150per min. capacity, + MBL-8/12,mounting bracket + TX4-100,wire, $305 + 10 + 28.50 = $343.50SPECIFICATIONSExcitation: 10-50 Vdc @10 mA Voltage Drop: <2 VdcSwitch: Open collector, 3-wire, normally open, reverse polarity and short circuit protectedSensing Distance: 8 mm (0.3")Max Switching Current: 250 mA Power-Up Delay:3-20 sec adj.Low Setpoint:Slow, 0.1-2.5 Hz (6-150 per min.);Fast, 2-50 Hz (120-3,000 per min.)Operating Temperature: -25 to 75°C (-13 to 168°F)Target: Any metal Case Material:30 mm nickel plated brass rolled threads Thread: M30 x 1.5 x 60 mm (2.3" length)Electrical Connection:3 screw terminals 0.20-0.27" dia wire Weight: 255 g (9 oz)J-45Shown Larger Than Actual SizeSSW201$305Model ShownCANADA www.omega.ca Laval(Quebec) 1-800-TC-OMEGA UNITED KINGDOM www. Manchester, England0800-488-488GERMANY www.omega.deDeckenpfronn, Germany************FRANCE www.omega.frGuyancourt, France088-466-342BENELUX www.omega.nl Amstelveen, NL 0800-099-33-44UNITED STATES 1-800-TC-OMEGA Stamford, CT.CZECH REPUBLIC www.omegaeng.cz Karviná, Czech Republic596-311-899TemperatureCalibrators, Connectors, General Test and MeasurementInstruments, Glass Bulb Thermometers, Handheld Instruments for Temperature Measurement, Ice Point References,Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders Relative Humidity Measurement Instruments, RTD Probes, Elements and Assemblies, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching Devices, Thermistor Elements, Probes andAssemblies,Thermocouples Thermowells and Head and Well Assemblies, Transmitters, WirePressure, Strain and ForceDisplacement Transducers, Dynamic Measurement Force Sensors, Instrumentation for Pressure and Strain Measurements, Load Cells, Pressure Gauges, PressureReference Section, Pressure Switches, Pressure Transducers, Proximity Transducers, Regulators,Strain Gages, Torque Transducers, ValvespH and ConductivityConductivity Instrumentation, Dissolved OxygenInstrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis InstrumentationHeatersBand Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and SwitchingDevices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular HeatersFlow and LevelAir Velocity Indicators, Doppler Flowmeters, LevelMeasurement, Magnetic Flowmeters, Mass Flowmeters,Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Flowmeters, Vortex Shedding FlowmetersData AcquisitionAuto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data LoggersPlug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers。
爱特顿产品说明书
UL2900 cybersecurity certificationUL2900 cybersecurity certificationSecure connectivity providesyou unmatched flexibilityWe make what matters work.At Eaton, we believe that power is a fundamental part of just about everything people do. Technology, transportation, energy and infrastructure—these are things the world relies on every day. That’s why Eaton is dedicated to helping our customers find new ways to manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. To improve people’s lives, the communities where we live and work, and the planet our future generations depend upon. Because that’s what really matters. And we’re here to make sure it works. See more at eatoncanada.ca*Power and energy monitoring that supports your operational goalsEaton can provide knowledge about your system to help you deliver results. Every business faces decisions about data: what to collect, how to collect it, proper analysis and decisioning to meet system performance requirements.Eaton’s Power Xpert Gateways (PXGs) help you understand electrical system performance, identify concerns, establish baselines and guide proper actions to support operational needs.Our PXGs come equipped with a powerful, yet simplified user interface, and provide a remote information-rich window into a facility’s energy andpower systems. The PXG acquires and consolidates data from devices typically found in electrical assemblies and systems including low- andmedium-voltage switchgear, switchboards, panel boards, transfer switches, and motor control centers.4G LTE & WiFi connectivity We tested our solution to meet UL2900 cybersecurity standards. Protecting your network by putting devices behind a single secure access point with role-basedaccess control (RBAC), advanced password management features, and SSL encryption.Follow us on social media to get the latest product and support information.Eaton is a registered trademark.All other trademarks are property of their respective owners.Eaton5050 MainwayBurlington, ON L7L 5Z1CanadaEatonCanada.ca© 2020 EatonAll Rights ReservedPublication No. SA005028EN August 2020Power Xpert GatewayRemote power monitoring platform with cloud connectivity2x Modbus TCP , 2x Modbus RTU,1x INCOMComparing the PXG 950-4G with the PXG 900Dimensions Supply power System memory1x Modbus TCP w/POE, 2x Modbus RTU1x USB A - for resetSecure and connected data at a glance helps you make better decisions fastertenant residencesMunicipal buildingsHealthcare facilities and research campusesCommercial buildings and retail shopping centersGovernment offices Office buildingsDistribution Data centersThe PXG 950-4G provides unmatched flexibility when bidding on your next commercial project and allows you to integrate modern connectivity without making costly updates to the IT infrastructure. The isolated cellular network provides this additional layer of security for even the most security conscious businesses. The wireless capabilities allow your customers to connect components such asPower Xpert Release (PXR) trip units, meters, relays, drives, and I/O devices to othercloud-based solutions, like Eaton’s Power Xpert Visualization & Analytics (PX EVA) software.Eaton’s PXG 950-4GPower Xpert Gateway 950-4G provides the reliable and secure connectivity to help you understand your electrical system’s performance.•Cellular and wireless “remote” IoT connectivity (4G LTE, WiFi or wired ethernet) •Accepts AT&T cellular connection•UL2900 cybersecurity certificationTo learn more on how to stay connected to your devices /pxg.Our PXG 900 offering is the ideal solution for systems with INCOM devices, allowing you to connect to components such as PXR trip units, and I/O devices to other cloud-based solutions, like Eaton’s PX EVA software.Eaton’s PXG 900。
洪利巴水质仪表产品简介说明书
Total Dissolved SolidsSalinityResistivityConductivity Ion ORP pH M E T E R SWA RR A N TY2 YEARM A D E I NJ A P A NBenchtop Water Quality Instruments| 01Benchtop Water Quality InstrumentsColour Touchscreen MetersD-50 (portable) Waterproof, IP67-rated housing and multi-parameter.HORIBA introduces Japan’s first glass electrode pH meter.1950M-5 (benchtop) conversion from vacuum tube tosemiconductor allows miniaturization and development of fast response meter1964Model F-7AD (benchtop)Incorporating an industry-first LCD display, the combination of a glass electrode, a reference electrode and a temperature-compensating electrode, makes testing easier.1977L-7 (integrated)Introduction of a small, handheld pH meter with integrated electrode.Model F-80 (benchtop) The world’s first instrument capable of measuring pH at 0.001 resolution includes an integral computer with automatic calibration and a self-diagnostic function.1980C-1 (card) Development of the world’s first flat sensor.1987B-111 (Pen type) The pen type sensor allows small samples to be tested.1990F-20 (benchtop) The world’s first wireless pH meter. Large graphical display gives user instructions on screen.1993F-50 (desktop) The world’s first pH meter with colour LCD display. Navigation panel guides operators on how to use the meter as well as resolve errors.2003LAQUA Benchtop Water Quality Instruments LAQUAtwin Pocket Water Quality Meters LAQUA Handheld Water Quality Instruments201120122013History of theHORIBA pH MeterThe humble beginning of HORIBA...In 1950, Dr. Masao Horiba pioneered and launched Asia’s first pH meter in Kyoto, Japan. Since then, HORIBA has been introducing several of the world’s firsts such as the first 0.001 resolution pH meter, the first flat sensor featured in the Cardy, the first wireless pH meter, the first colour LCD display, etc.02 |• Chemical-resistant, 2mm thick super white glass panel with protection cover• Easy to clean and elegant round body • GLP / GMP compliant•Switchable display—digital, graph, and analogTouchscreen Precision. The New Benchmark.Protection Cover 21 CFR Part 11 SoftwareUniversal Power Adapter• Multi-voltage (100-240V)•6 types of international standard plugs included (US,UK, EU, Australia / New Zealand, Korea and China)| 03360º Electrode Stand Maneuverability• E ach meter comes with standard (Height: 384mm) electrode stand with arm• Electrode stand arm holds up to 3 electrodes • Taller electrode stand (Height: 650mm) with telescopic shaft is also available•Arm level is adjusted by pressing and holding down the clip end while moving it up or down the shaft• Stopper controls vertical slide of the electrode stand arm•A r m rot ate s 360º s o be a kers c a n be conveniently positioned anywhere around the standBenchtop Water Quality InstrumentsColour Touchscreen MetersAnalogGraphDigitalDragFlick Tap Intuitive Touch-Control Operation04 |Data Management•Meter internal memory stores up to 2000 data withsample ID for easy referenceSample ID• Data can be stored simultaneously on both meter and USB flash drive (if inserted)•Calibration and measurement data are logged automatically at set time intervalData Storage•Data search by date, parameter, or sample IDData Search•P a s s w o r d s e t t in g f o r s e c u r i t y•Up to 25 administrators or operators can be registeredMeter Security•A u t o o r m a n u a l p r i n t i n g o f c a l i br a t i o n a n d measurement values for record keeping•Printout contents can be customized based on user preference or GMP/GLP requirements—date and time, operator, electrode and meter information,electrode status, and calibration dataCustom Printout• Data output via USB to PC / USB flash drive or via RS232C to PC / printer (cables sold separately)•Analog output adjustment—voltage output can beacquired from digital multimeter or recorder connected tothe analog output connectorMeter Connections•Data key shows settings that allow users to search, view, delete, and copy data from meter to USB flash driveData Key| 05Intelligent AssistantProvides step-by-step guidance on calibration, sample measurement, application methods, maintenance, inspection and troubleshooting• Electrode model, either selected from preset list or entered manually, and lot or MFG no. (entered manually) are included in storeddata and printouts•Temperature sensor calibration functionBenchtop Water Quality InstrumentsColour Touchscreen MetersSMARTCalibration Support FunctionReading Stability Check• Perform proper calibration with stable readings• Determine the stability of reading at a glance in either digital or graph display during pH and ion calibration•Stability value is a deviation between the maximum and minimum readings in the last 10 secondseInspection FunctionEasy navigation for meter and electrode inspections using a simulator. Various industrial standards (JIS, USP , EP , JP , CP) are also supported.•Convenient for IQ / OQ / PQ validationNAVIGATIONSupports USP/EP/JP/CPDisplay result after inspectionStart inspection Supports ion standard addition methodsADVANCEDBenchtop Water Quality InstrumentsColour Touchscreen MeterspH• 5 pH buffer groupsUSA (1.68, 4.01, 7.00, 10.01, 12.45) NIST (1.68, 4.01, 6.86, 9.18, 12.45) NIST2 (1.68, 4.01, 6.86, 10.01, 12.45) China (1.68, 4.01, 6.86, 9.18, 12.46)Custom (any pH buffers)mV•Display absolute potential and relative potential•Up to 5 calibration points• 0.01 and 0.001 pH Resolutions• Auto setting allows the meter to toggle between 0.01 and 0.001 resolution depending on the stability of the reading•Auto calibration / Auto buffer recognitionIon• Make your own calibration curve with maximum of 5 points or perform standard addition techniques•Programmed with standard addition methods—known addition and sample addition (single and double are available for both methods)•Measurement units - µg/L, mg/L, g/L, mmol/L, mol/LORP•Capable of 1-point calibrationConductivity• Automatic / manual calibration up to 4 points• Adjustable temperature coefficient and reference temperature for temperature compensated readings • Selectable cell constants – 0.1, 1.0, 10.0• Auto ranging S/cm and S/m units, fix mS/cm unit•Support conductivity standard methods for pharmaceutical water—USP , EP , JP and CPTDS Calibration Curves08 |Multi-Language•Choose a language that you are familiar with—English, J a p a n e s e , C h i n e s e , Korean, and VietnameseSalinity• Programmed with 2 predetermined salinity curves—NaCl and seawater• Salinit y value is calculated based on measured conductivity value• 1-point calibration using standard solution•Measurement units—percentage (%) and parts per thousand (ppt)FEATURESAuto Log Data•Log data automatically by setting time interval from 1 to 999 secondsSound Setting•Play a click sound every time you tap a keyAuto Stable / Auto Hold • In measurement mode, the meter displays live readings continuously• Activate auto hold by tapping START•Auto hold settings—Exact, Normal, Brief, Time, Customize, and ManualScreen Settings• Set stylish theme on your meter screen—Standard, Cool, Monotone, and Kyoto•Power saving mode—turns off the backlight to save powerNaCl Curve| 09F-72GSingle ChannelF-73GDual ChannelBenchtop Water Quality InstrumentsColour Touchscreen Meters(3999960011)F-73A-S (3999960012)Features:• Up to 5 calibration points for pH and Ion• 5 pH buffer groups – USA, NIST, NIST2, China, and Custom • 0.01 and 0.001 pH resolutions•pH calibration interval setting – 1 to 999 days• 1-point ORP calibration• Ion calibration curve and standard addition methods • Temperature sensor calibration function•Single channel for F-72 and dual channel display for F-7310 || 11DS-72GSingle ChannelFeatures:• Wide conductivity range• Automatic / manual conductivity calibration • Up to 4 calibration points• Adjustable temperature coefficient, reference temperature, and cell constant• Temperature sensor calibration function• Auto ranging S/cm and S/m and fix mS/cm conductivity units • Parts per thousand (ppt) and percentage (%) salinity units • NaCl and seawater salinity curves•4 Total dissolved solids (TDS) curves – EN27888, Linear, NaCl, 442Benchtop Water Quality InstrumentsColour Touchscreen MetersConductivity (mS/cm)T D S (m g /L )T D S 442 / p pm442 (Myron) Curve25020015010050NaCl / mMC O ND / m S /c m -1Dimensions170 (W) x 174 (D) x 73 (H) mm12 || 13F-74GDual ChannelFeatures:• Combine the functions of F-72 and DS-72 models • Dual channel and simultaneous measurements - Channel 1: pH, Ion, mV, ORP- Channel 2: Conductivity, Salinity, Resistivity and TDS•Switchable single or dual channel displayBenchtop Water Quality InstrumentsColour Touchscreen MetersF-74A-S(3999960014)14 |waterproofwater proofThe sensor is located on the flat surface of the electrode tip, with less than a 100 μm protrusion from the housing.Measurements can be made from a minute amount of moisture on the solid sample e of a semiconductor sensor means there are no concerns that the electrode will be damaged.Also perfect for measuring samples in shallow containers such as Petri dishes.water proof Pb Freewater proof Pb Freewater proof Pb FreeStable measurement for routine testing. Standard plastic electrode (9625-10D)water proof Pb FreeThe electrode has a plastic body which is ideal for general purpose measurement.Can be submerged up to 1m depth and 30mins. (with refilling port closed)Combination ISEIon-selective electrodes are responsive to concentration of particular ions in the test liquid and are variable-potential electrodes. They are used in conjunction with reference electrodes to measure the concentration of particular ions. HORIBA’s years of experience and know-how in this field are behind the wide range of ion electrodes we offer. When measurements are made using an ion meter, calibrating it with various standard solutions will give direct readings of the ion concentration. Note that since volume-detection level changes with temperature, measurements must be taken at a fixed temperature.Ammonia ion (NH) electrode • membrane cap, 3pcs• 1000mg/L ammonium ion standard solution, 50ml • 100mg/L ammonium ion standard solution, 50ml • ammonia electrode filling solution, 50ml• calcium electrode tip, 2pcs• 1000mg/L calcium ion standard solution, 50ml • 100mg/L calcium ion standard solution, 50ml• chloride electrode tip• 1000mg/L chloride ion standard solution, 50ml • 100mg/L chloride ion standard solution, 50ml • chloride electrode filling solution, 50ml• fluoride electrode tip• 1000mg/L fluoride ion standard solution, 50ml • 100mg/L fluoride ion standard solution, 50mlNitrate ion (NO) electrode • nitrate electrode tip, 2pcs• 1000mg/L nitrate ion standard solution, 50ml • 100mg/L nitrate ion standard solution, 50mlPotassium ion (K+) electrode • potassium electrode tip, 2pcs• 1000mg/L potassium ion standard solution, 50ml • 100mg/L potassium ion standard solution, 50ml| 177683S7660S7661S7681S7682SNote: Detailed information on standard solutions, ISAs, and filling solutions can be found on page 2118 || 19ModelCell Constant Measurement Range 3551-10D0.1 cm 3552-10D3553-10D1000 m 9382-10D100 m 3561-10D3562-10D3573-10C1000 m 3574-10C1000 m 3014081712Overall length: 175 mm Diameter of probe: 23 mm Connectors: BNC & phono jack3014081714Overall length: 175 mm Width of probe: 28 mmConnectors: BNC & phono jack3014046709Overall length: 150 mm Diameter of probe: 16 mm Connectors: BNC & phono jack3014082350Overall length: 143 mm Diameter of probe: 18 mm Connectors: BNC & phono jack3014082350Overall length: 205 mm Diameter of probe: 18 mm Connectors: BNC & phono jack3014082590Overall length: 222 mm Diameter of probe: 18 mmConnector: BNC3014082592Overall length: 136 mm Diameter of probe: 66 mmConnector: BNCConductivity Cells (Submersible Type)Conductivity Cells (Flow Type)3014081545Overall length: 150 mm Diameter of probe: 12 mm Connectors: BNC & phono jack9300-10D Waterproof platinum 3-in-1 type3014046710Overall length: 150 mm Diameter of probe: 12 mm Connectors: BNC & phono jack100-2320043639pH 1.68 Buffer Solution at 25C500ml100-4320043638pH 4.01 Buffer Solution at 25 C500ml100-7320043637pH 6.86 Buffer Solution at 25 C500ml100-7U3200738711pH 7.00 Buffer Solution at 25 C500ml100-9320043636pH 9.18 Buffer Solution at 25 C500ml100-10U3200738712pH 10.01 Buffer Solution at 25 C500mlConductivity Standard SolutionsCode Part No.Description Volume100-21320073871384 µS/cm Conductivity Standard Solution500ml100-2232007387141413 µS/cm Conductivity Standard Solution500ml100-23320073871512.88 mS/cm Conductivity Standard Solution500ml100-243200738716111.8 mS/cm Conductivity Standard Solution500mlORP PowdersCode Part No.Description Volume160-51320004361889 mV at 25°C (for 250ml solution)10 sachets/pack160-223200043617258 mV at 25°C (for 250ml solution)10 sachets/packpH/ORP Electrode Filling SolutionsCode Part No.Description Volume3003200043640 3.33M KCl250mlpH Electrode Cleaning SolutionsCode Part No.Description Volume2203014028653For removing inorganic residues from glassmembrane and liquid junction 2 x 50ml2303200530494For removing inorganic and organic residues fromglass membrane (30ml Solution A & 100ml Solution B)30ml & 100ml2503200366771For removing protein residues from glassmembrane and liquid junction 400ml ORP PowdersCleaning Solutions22025023030020 || 21500-NH4-SH 32006971711000 mg/L Ammonium Ion Standard Solution 500ml 500-NH4-SL 3200697172100 mg/L Ammonium Ion Standard Solution 500ml 500-CA-SH 32006971751000 mg/L Calcium Ion Standard Solution 500ml 500-CA-SL 3200697176100 mg/L Calcium Ion Standard Solution 500ml 500-CL-SH 32006971671000 mg/L Chloride Ion Standard Solution 500ml 500-CL-SL 3200697168100 mg/L Chloride Ion Standard Solution 500ml 500-F-SH 32006971631000 mg/L Fluoride Ion Standard Solution 500ml 500-F-SL 3200697164100 mg/L Fluoride Ion Standard Solution 500ml 500-NO3-SH 32006971791000 mg/L Nitrate Ion Standard Solution 500ml 500-NO3-SL 3200697180100 mg/L Nitrate Ion Standard Solution 500ml 500-K-SH 32006971831000 mg/L Potassium Ion Standard Solution 500ml 500-K-SL3200697184100 mg/L Potassium Ion Standard Solution500mlIonic Strength AdjustorsCode Part No.DescriptionVolume 500-NH3-ISA 3200697174Ammonia Ionic Strength Adjustor 500ml 500-CA-ISA 3200697178Calcium Ionic Strength Adjustor 500ml 500-CL-ISA3200697170Chloride Ionic Strength Adjustor 500ml 500-F-TISAB 3200697166Fluoride Ionic Strength Adjustor 500ml 500-NO3-ISA 3200697182Nitrate Ionic Strength Adjustor 500ml 500-K-ISA3200697186Potassium Ionic Strength Adjustor500mlIon Selective Electrode Filling SolutionsCodePart No.DescriptionVolume 500-NH3-IFS 3200697173Ammonia Electrode Filling Solution 500ml 500-CA-IFS 3200697177Calcium Electrode Filling solution 500ml 500-CL-IFS 3200697169Chloride Electrode Filling Solution 500ml 500-F-IFS 3200697165Fluoride Electrode Filling Solution 500ml 500-NO3-IFS3200697181Nitrate Electrode Filling Solution 500ml 500-K-IFS3200697185Potassium Electrode Filling Solution500mlCalcium Ion Electrode SolutionsChloride Ion Electrode SolutionsFluoride Ion Electrode SolutionsPotassium Ion Electrode SolutionsAmmonia Ion Electrode SolutionsNitrate Ion Electrode Solutions22 |AccessoriesCode Part No.Description320070716121 CFR Part 11 Software includes CD with PIN code, USB cable, and manual5700012747Printer (for GLP/GMP compliance) Cable sold separately, Plain paper3014030148Printer cable (1.5 m)3014030149Printer paper (20 rolls)3014030150Ink ribbon (5 pcs/set)3200647413Multi-Voltage (100-240V) with 6 plugs, (US, UK,EU, ANZ, Korea and China)1.8 m cable3014028368Digital simulator X-51 (pH, mV, Ion, DO, tempera-ture simulator)3014028370Digital simulator X-52 (Conductivity, temperature simulator)3200382462LCD protection sheet (2 pcs/pack)3200382441Protection cover (Protects the meter for F-70, DS-70, 1000 series)3200373941USB cable (to connect meter and PC.)3014030152Analog cable (Analog (alarm) output cable)3014030151Serial cable (to connect meter and PC (Serial, 9 pins))FA-70S 3200382557Adjustable, free-standing electrode stand (Height: 384 mm) image on the rightFA-70L3200382560Long, free-standing electrode stand (Height: 450-650mm) image on the right3200373991Arm for electrode stand FA-70A, FA-70S, & FA-70L 3200373961 Electrode holders, 2pcs (for mounting electrode with round cap on electrode stand arm)3200382477Electrode protection caps, 3pcs (for 9615S-10D, 9618S-10D, 9681S-10D pH electrode)3200043508Electrode protection caps, 5pcs (for 9621-10D, 9625-10D, 9630-10D, 9631-10D, 9632-10D, 6367-10D, 6377-10D, 6252-10D, 6261-10C, 1066A-10C, 1076-10C, 2060-10T, 9300-10D, 9382-10D, 3552-10D pH electrode)3200382482Electrode protection cap for long electrode (for 9680S-10D, 9480-10C pH Electrode)PrinterPrinter cableInk ribbon Printer paperUniversal AC adapterX-51X-52USB cableSerial cableLCD protection sheetProtectioncover174m m73m m170mm160mm46m m338m m 650m m307m m 195mm343m m Body Standard Electrode StandLong Type Electrode StandStretch shaftLong Type Electrod e Stand FA-70L (450~650m m)Standard Electrode StandFA-70S (384mm)LAQUA-SW-21CFR11(a r m m o v a b l e r a n g e )(a r m m o v a b l e r a n g e )*W h e n a r m i s h o u s e d 450m mHORIBA offers a variety of services to conform to quality standards and international guidelines such as GLP , GMP and ISOSUPPORT HORIBA CUSTOMER SUPPORT SYSTEMValidation SupportPlease contact us with any questions or requirements for your validation procedure. • Traceability certification*•IQ/OQ/PQ support* • SOP guidance • FAQ*Optional servicesElectrodesHORIBA’s superior electrode technology has been employed in manufacturing our unparalleled tough pH glass bulbs and unique flat sensors. Our electrodes have different designs to cater a wide range of applications—from pure water to complex samples. Select the suitable electrode that is specially designed for your application. Handheld MetersIn the lab, in the field or anywhere you need it. LAQUA Handheld meters are designed for use with one hand and with an IP67 waterproof rating and shock-resistant casing. Meters can be used for long periods, even in dark places, making it ideal for field measurements in rivers and lakes.Pocket MetersAnalyzing water quality is simplified when using our LAQUAtwin range of meters. Designed to produce accurate and reliable results. Anyone, anywhere, at any time can measure samples easily with a LAQUAtwin meter. See just how good they are at our website.Application NotesLAQUAtwin pocket meters offer quick and convenient alternative to analyze important parameters with high accuracy. Several application notes are available at (http://goo.gl/znwE6j ) detailing the use of LAQUAtwin and the results achieved for the respective applications. Additional application notes will be added when available.Please read the operation manual before using this product to assure safe and proper handling of the product.• The contents of this catalog are subject to change without prior notice, and without any subsequent liability to this company.• The color of the actual products may differ from the color pictured in this catalog due to printing limitations.• It is strictly forbidden to copy the content of this catalog in part or in full.• All brand names, product names and service names in this catalog are trademarks or registered trademarks of their respective companies.• •Complies with all ACMA RCM compliance requirements EMC Systems Doc Number: C160104-2HORIBA Instruments Incorporation9755 Research Drive Irvine, CA 92618 U.S.A.Tel: +1 (949) 250-4811Fax: + 1 (949) 250-0924e-mail:******************。
安迪尔温度传感器产品说明书
24
21⁄2
—
41⁄2
3⁄4
71⁄2
3⁄4
101⁄2
3⁄4
131⁄2
3⁄4
161⁄2
3⁄4
221⁄2
3⁄4
1 NPT
1-260S-U21/ 2- (*) 1-260S-U41/ 2- (*) 1-260S-U71/ 2- (*) 1-260S-U101/ 2- (*) 1-260S-U131/ 2- (*) 1-260S-U161/ 2- (*) 1-260S-U221/ 2- (*)
– –
–
Carbon Steel 5200 5000 4800 4600 3500 1500 –
A.I.S.I.-304 7000 6200 5600 5400 5200 4500 1650
A.I.S.I.-316 7000 7000 6400 6200 6100 5100 2500
Monel
6500 6000 5400 5300 5200 1500 –
Discounts apply to similar thermowells.
B-20
3 /4-260S-U21/ 2- (*)
4
3 /4-260S-U41/ 2- (*)
6
3 /4-260S-U71/ 2- (*)
9
3 /4-260S-U101/ 2- (*)
12
3 /4-260S-U131/ 2- (*)
15
3 /4-260S-U161/ 2- (*)
18
3 /4-260S-U221/ 2- (*)
Series 260S—General Use
13/4 1
THREAD ALLOWANCE
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
ANDpSi056ET0S-HB-KIT
Analog RGB Interface
The ANDpSi056ET0S-HB-KIT is a 100% Plug in Play LCD controller board with VESA standard RGB 8 bit supports. It
utilizes poly-silicon (psi) technology to provide a brighter, thinner and lighter display with high-resolution and measures only 4.25” x 4.0” x 0.35.”
Features:
•VESA standard Analog RGB 8 bit supports –VGA (640 x 480) @60Hz, 70Hz, 75Hz –SVGA (800 x 600) @ 60Hz, 70Hz, 75Hz –XGA (1024 x 768) @60Hz, 70Hz, 75Hz –SXGA (1280 x 1024) @60Hz, 70Hz, 75Hz •Scaling engine ST Micro ADE3700•On board LVDS interface
•Dedicated interface connectors for VGA, SVGA, XGA, &SXGA displays
•Compact size 4.25”” x 4.0” x 0.35”, low profile components •Internal +12V power supply
•Low profile VGA connector available •Supports 16 million colors •Interface TTL / LVDS
•100% Plug in Play LCD controller board
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Dimensions:
4.25” x 4.5” x 0.25”
Connector Definitions:
Con8: Touch screen connector Con9: XGA/SXGA panel interface Con4: VGA/SVGA panel interface Con2: Backlight interface Con3: +12V AC/DC Power In
J2: +12V DC internal support from PC power supply Con6: DB15 Analog RGB standard
Con11: Analog RGB low profile connector
LCD Display Supports:
• One LVDS / Two LVDS support • Supports VGA, SVGA, XGA, SXGA • Panel interface TTL 12bit, 18bit, 24bit • Panel interface LVDS: 24bit / 48bit
• Brightness control10% to 100% programmable
• Auto sync, Auto input detect, Auto setup, Auto color level
GND= Pin 7, Pin 14, Pin 17, Pin 24VCC= Pin 1, Pin 2, Pin 3
CON9: LCD Panel Data Interface
Pin2VDD Red T
wisted pair Pin3VDD Red Pin 7Vss Black T wisted pair Pin 30Rin0-Black T wisted pair Pin 29Rin0+White Pin 14Vss Black Single wire Pin 28Rin1-Black T wisted pair Pin 27Rin1+White Pin 17Vss Black Single wire Pin 26Rin2-Black T wisted pair Pin 25Rin2+White Pin 24Vss Black Single wire Pin 23Rclk-Black T wisted pair
Pin 22
Rclk+
White
CON2: CCFL Cable Linfinity
On Board
Molex (53261-1090)
Linfinity
Molex (53261-0890)
Red Vin + 12V Red Vin + 12V NC Black GND Black GND NC White Sleep (on/off)Brightness
Y ellow NC NC NC
NC
CON1: OSD Key Pads Interface
Molex (WM1759ND)Pin1= KB0 (Input data)Pin2= KB1 (Input data)Pin3= GND Pin4= GND
Pin5= O-LED (Input data)Pin6= G-LED (Input data)Pin7= NC Pin8= NC
OSD Support:
ADE3700 OSD Keys: (Six Buttons)
Board Photo。