HLMP-1790C0000中文资料
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
HLMP-7000, -7019, -7040
Package Dimensions
A B
HLMP-1700, -1719, -1790
HLMP-4700, -4719, -4740
Note:
1. θ1/2 is the typical off-axis angle at which the luminous intensity is half the axial luminous intensity.
Part Numbering System
HLMP-X7XX - X X X XX
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02, BH: Tape & Reel, Straight Leads
A1, B1: Right Angle Housing, Uneven Leads
A2, B2: Right Angle Housing, Even Leads
FH: 2 Iv bins select with Inventory Control
Color Bin Options
0: Full color bin distribution
B: Color bins 2 & 3 only
Maximum Iv Bin Options
0: Open (No. max. limit)
Others: Please refer to the Iv bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Color Option
00: GaP HER
19: GaP Yellow
40: GaP Green
90: GaP Green
Package Options
4: T-13/4 (5 mm)
1: T-1 (3 mm)
Electrical/Optical Characteristics at T A = 25°C
Test Symbol Description T-13/4T-1Min.Typ.Max.Units Conditions V F Forward Voltage47001700 1.7 2.0V 2 mA
47191719 1.8 2.5
47401790 1.9 2.2
V R Reverse Breakdown47001700 5.0V I R = 50 µA Voltage47191719 5.0
47401790 5.0
λd Dominant47001700626nm Note 1 Wavelength47191719585
47401790569
∆λ1/2Spectral Line4700170040nm
Halfwidth4719171936
4740179028
τS Speed of Response4700170090ns
4719171990
47401790500
C Capacitance4700170011pF V F = 0,
4719171915 f = 1 MHz
4740179018
RθJ-PIN Thermal47001700260[3]°C/W Junction to Resistance47191719290[4]Cathode Lead
47401790
λPEAK Peak Wavelength47001700635nm Measurement
47191719583at peak
47401790565
ηV Luminous Efficacy47001700145lumens Note 2
47191719500watt
47401790595
Notes:
1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
2. The radiant intensity, I e, in watts per steradian, may be found from the equation I e = I V/ηV, where I V is the luminous intensity in
candelas and ηV is luminous efficacy in lumens/watt.
3. T-13/
4.
4. T-1.
Parameter
Maximum Rating
Units Power Dissipation
Red 24mW
(Derate linearly from 92°C at 1.0 mA/°C)Yellow 36Green
24
DC and Peak Forward Current
7mA Transient Forward Current (10 µs Pulse)[1]500mA Reverse Voltage (I R
= 50 µA) 5.0
V
Operating Temperature Range Red/Yellow -55°C to 100°C Green
-20°C to 100°C
Storage Temperature Range -55°C to +100°C Lead Soldering Temperature 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Note:
1. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
Figure 2. Forward Current vs. Forward Voltage.Figure 3. Relative Luminous Intensity vs. Forward Current.
VOLTAGE – V
6
2
4
8
10