n6669308
诺基亚N96 CODE码汇总
0556531 印尼-白色
N96
RM-247 CTR INDONESIA DARK GREY
0543696 印尼-暗灰
N96
RM-247 CTR INDIA LATIN DARK GREY
0543700 印度-拉丁系-暗灰
N96
RM-247 CTR NORTH AFRICA OYSTER
0556587 北非-白色
N96
RM-247 CUST.TRX Movistar Spain DG
0569384 西班牙Movistar-暗灰
N96
RM-247 CUST.TRX Brasil NDB DG
0543725 独联体-暗灰
N96
RM-247 CTR SSA-PT DARK GREY
0554453 撒哈拉沙漠以南非洲多个国家-葡萄牙系-暗灰
N96
RM-247 CTR RUSSIA/BELARUS DARK GREY
0543722 俄罗斯/白俄罗斯-暗灰
N96
RM-247 CTR UAE DARK GREY
N96
RM-247 CTR TURKEY DARK GREY
0543721 土耳其-暗灰
N96
RM-247 CTR ARABIC2 OYSTER
0556586 阿拉伯2-白色
RM-247 CTR ISRAEL OYSTER
0556585 以色列-白色
N96
RM-247 CTR CIS OYSTER
0556598 保加利亚/罗马尼亚-白色
OSRAM DRAGONpuck DP3 Data Sheet
DP3DRAGONpuck®Data SheetPicture for Datasheet is missingBenefitsCompact High-Flux LED light source with high light intensity¾Flat design for wide range of novel applications¾ApplicationsSpecialized spot lighting¾Reading lights ¾Small signals¾Technical FeaturesOperation only with OPTOTRONIC® constantcurrent devices (see page 3)¾Dimensions: H: 12 mm, Ø: 35 mm¾Assembly with M3 screw on metallic heat sink ¾Factory installed 200 mm / AWG22 double polecable¾Protection class IP 22 according to DIN EN60529¾Proofed according to IEC 60068-2 (shock andvibration)¾To obtain maximum LED lifetime please readthe recommended procedures concerning thermal management before beginning design and construction of luminaires.¾Color Power [W]*Radiance Angle [°]*Wavelength [nm] Color Temp [K]*Lum. Intensity[cd]*Current [mA]*Product Number of LEDsTechnical Operating Datawhite 3,6206500 K 410350DP3-W2B-8653white 3,6165400 K 900350DP3-W3F-8543white 3,6204700 K 410350DP3-W2B-8473white 3,6162700 K 630350DP3-W3F-7273red 2,420616 nm 500350DP3-A23red 2,416616 nm 215350DP3-A13yellow 2,416589 nm 215350DP3-Y13green 3,616531 nm 850350DP3-T23verde 3,616505 nm 295350DP3-V13blue 3,620468 nm 115350DP3-B23blue3,616468 nm95350DP3-B13All Data are related to the entire moduleDue to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data.*)+)Preliminary DataDrawingDrawing is missingOperating Temperature at Tc-Point [ °C ] *Storage Temperature[ °C ] *Product Reverse Voltage[ V dc ] *Minimum and Maximum RatingsMax. Current [ A dc ] *DP3-W2B-86524-3085-3085......0,5DP3-W3F-85424-3085-3085......0,5DP3-W2B-84724-3085-3085......0,5DP3-W3F-72724-3085-3085......0,5DP3-A224-3085-3085......0,5DP3-A124-3085-3085......0,5DP3-Y124-3085-3085......0,5DP3-T224-3085-3085......0,5DP3-V124-3085-3085......0,5DP3-B224-3085-3085......0,5DP3-B124-3085-3085......0,5Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module.Exceeding maximum ratings for operating current will cause hazardous overload and will likely destroy the LED Module. Several modules may be connected in series up to the maximum voltage of 100 V DC (outside SELV limits).The temperature of the LED module must be measured at the Tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. For exact location of the Tc-point see drawing below.*)The module is designed to work with current sources. The maximum output voltage may not exceed 100 V DC. Reverse operation is not allowed and may destroy the module.Safety InformationThe LED module itself and all its components must not be mechanically stressed.¾Assembly must not damage or destroy conducting paths on the circuit board.¾Serial connection is highly recommended as safe electrical operation mode.Parallel connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the LED module.Correct electrical polarity needs to be observed. Wrong polarity may destroy the module.¾¾¾Recommended power supply:¾OT 9/200-240/350 or OT 9/100-120/350(E): 350 mA constant current operation¾OT 9/10-24/350 DIM, OT 9/10-24/350 DIM(E): 350 mA constant current PWM dimming, 1..10V interface ¾OT 9/200-240/350 DIM: 0-350 mA constant current operation, 1..10 V interface (dimming), strain relief ¾Maximum number of DP3 for OT9: White/Blue/Green: 2; Red/Yellow: 3¾OT 18/200-240/700 DIM: 0-500 mA constant current operation, 1..10 V interface (dimming), strain relief. The OT18 comes with preset limitation to 500mA, thus giving 12W due to SELV (<=25V)¾Maximum number of LEDs for OT18: White/Blue/Green: 2; Red/Yellow: 3¾Pay attention to standard ESD precautions when installing the module.¾The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion.¾Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.¾The LED Module incorporates no protection against short circuits, overload or overheating. Therefore it is absolutely necessary to operate the modules with a electronically stabilised power supply offering protection against the above mentioned safety risks.For dimming applications attention should be paid to specific references in "OPTOTRONIC ® Technical Guide".OSRAM OPTOTRONIC ® power supplies are specifically designed with protection features for safe operation.When using power supplies other than OPTOTRONIC ® the following basic safety features are required, in addition to any other application specific concerns and local safety codes:Short circuit protection ¾Overload protection Overheat protection¾¾Assembly Information¾The mounting of the module is facilitated by means of a M3 screw which fits to a threaded hole in the rear of the DRAGONpuck® housing. Do not exceed a torque of 40 Ncm.¾The module should be in good thermal contact with the designed metallic mounting surface. Use of an appropriate heat sink compound is recommended to eliminate air gaps.¾To obtain maximum LED-lifetime please read carefully the recommended procedures concerning thermal management in ourapplication note "Lifetime of LED-modules" before beginning construction of luminaires. This application note is available from your OSRAM representative.Productgroup Productname EAN *S-Unit *Ordering GuideDRAGONpuck®DP3-W2B-865400832103340616DRAGONpuck®DP3-W3F-8544008321214508DRAGONpuck®DP3-W2B-847400832103336916DRAGONpuck®DP3-W3F-7274008321214447DRAGONpuck®DP3-A2400832114953416DRAGONpuck®DP3-A1400832103318516DRAGONpuck®DP3-Y1400832103342016DRAGONpuck®DP3-T2400832114951016DRAGONpuck®DP3-V1400832103334516DRAGONpuck®DP3-B2400832114947316DRAGONpuck®DP3-B1400832103320816EAN: Ordering number per single module S-Unit: Modules per shipping unit*) Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves.Related and Further InformationThe new dimension of light ¾153 S006 GBOPTOTRONIC® Data Sheets ¾ OPTOTRONIC® Technical Guide ¾130 T008 GBOSRAM LED systems¾/led-systemsApplication Note: Life Expectancy¾/led-systems-downloadsSales and Technical SupportSales and technical support is given by the local OSRAM subsidiaries.On our world wide homepage all OSRAM subsidiaries are listed with complete address and phone numbers.OSRAM GmbH Hellabrunner Strasse 1D - 81536 München Germany +49 (0)89 6213-0。
Motorola 3.5 kHz 产品说明书
RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。
Bussmann
Finger-safe power distribution blocksCatalog symbol:• PDBFS_Description:The small footprint, high Short-Circuit Current (SCCR) Bussmann™ series power distribution blocks provide IP20* finger-safe protection under specified conditions. These UL® Listed, single-pole blocks are of a modular design that permits dovetailing together the required number of poles for an application and still meet the UL 1953 minimum 1” and 2” spacing required per UL 508A for feeder circuit applications and per NEC® for field installations.With SCCRs up to 200 kA, these blocks help achieve compliance with National Electrical Code (NEC) and OSHA requirements by resolving a common SCCR “weak link” in industrial control panels.To increase application flexibility, these blocks feature dual-wire rated ports that accept copper or aluminum conductors while retaining a UL Listed status.With panel or 35 mm DIN-Rail** mounting for application flexibility these blocks are suitable for installation in wireways and industrial control panel feeder and branch circuits.* See table on page 5.** PDFFS504 panel mount only.Catalog number example:PDBFS204 is a 1-pole blockWhere:• The catalog symbol “PDBFS” defines the block as a finger-safe design.• The catalog number ending “204” in this example defines this block’s lineside and loadside characteristics covering the ampacity, number of ports and wire sizes, etc.• See the catalog number table for details on the available lineside/loadside characteristics.How to order:From the catalog number table, select the catalog number that defines the desired lineside/loadside port and conductor characteristics.Order one block per pole for the application. Multiple single-pole blocks can be ganged together via the dovetailing feature to form multi-pole configurations.Specifications:Ratings• Volts:• 600 V (UL)• 690 V (IEC)• Amps: 175 to 760 A• SCCR: Up to 200 kA (see table for circuit protection details)Agency information• UL 1953 Listed, Guide QPQS, File E256146• CSA® Certified, Class 6228-01, File 47235• RoHS compliant• CEFlammability rating• UL 94 V0Storage and operating temperature range • -4°F to 248°F (-20°C to 120°C)Conductors†• Stranded 75°C copper and aluminum• Higher temperature rated conductors permitted with appropriate derating† As specified in the catalog number table.2Technical Data 10536Effective June 2021Finger-safe power distribution blocks/bussmannseriesFeatures and benefits•IP20 finger-safe under specified conditions increases safety by isolating energized connections.•Wire-ready captive termination screws cannot be misplaced and are shipped “backed out” to save time on conductor installation.• Sliding DIN-Rail latch provides easy block mounting.•For multiple pole applications, all single-pole units can be gang mounted by using the interlocking dovetail pins that are pre-installed on the side of the blocks.•Elongated panel-mounting holes provide greater flexibility and installation ease when matching up with drilled panel holes.Dual wire port application•Rated for dual wire port application to increase the possiblenumber of lineside and loadside connections. E.g., PDBFS220 can accept two wires into the lineside port (#4 - #14 Cu, #4 - #8 Al) and two wires per port (eight connections total) on the loadside lug (#8 - #14 Cu, #8 Al).•Dual wire applications are only viable when using two wires of the same size, stranding, and insulating and conductor material.Ferrule terminal application•Bussmann series PDBFS power distribution blocks are rated for use with UL Listed ferrules (see catalog number table for details).•Ferrule applications allow for the use of a broader range of conductor stranding and simulate a more efficient, solid wire connection with the PDBFS terminal port.•Always use UL Listed ferrules in accordance with the manufacturer’s specifications and instructions.Catalog numbers:(customer supplied) applied according to the manufacturer’s specifications. Ferrule ratings apply to copper wire only.** See pages 4 and 5 for the tested upstream overcurrent protective devices necessary for achieving these SCCRs.† Torque rating for dual wire and ferrule application is 30.5 N•m (270 Lb-in).†† Torque rating for ferrule application is 13.6 N•m (120 Lb-in).3Finger-safe power distribution blocksTechnical Data 10536Effective June 2021/bussmannseries Selecting SCCR power distribution blocks and terminal blocksShort-circuit current rated power distribution blocksBussmann series power distribution blocks have three distinct styles to match different application needs. There are the PDBFS_ and PDB_ high short-circuit current rated power distribution blocks and the 16_ power terminal blocks. The differences are whether the power distribution blocks are enclosed or not, and whether they are UL 1953 Listed power distribution blocks or UL 1059 Recognized power terminal blocks, which have different minimum spacing requirements. The table on this page will assist you in selecting which block is right for your application.Why these are importantPer the NEC and OSHA, equipment cannot be installed in anelectrical system at a location where the available fault (short-circuit) current is greater than the equipment’s SCCR.Further, equipment SCCRs are required in the 2014 NEC and for UL 508A Listed control panels. Marking the equipment SCCR on control panels (NEC 409.110), industrial machinery electrical panelsSelection tableThis table provides an overview of the three Bussmann series power distribution and terminal blocks mentioned above. For details on the PDB_ blocks, see data sheet number 10537. For the 16_ blocks, see data sheet numbers 10533 (UL Recognized power distribution blocks),10534 (splicer blocks) and 10535 (stud blocks).PDBFS_distribution blocksY es***Y es Y es Y es Y es Y es Y esPDB_UL 1953 Listed powerdistribution blocksNo †Y es Y es Y es Y es Y es Y es, with optional cover 16_UL 1059 Recognizedterminal blocksNo †Y esNo ††Y esNo ††Y esNo* When protected by proper fuse class with maximum ampere rating specified or smaller.** For details, see PDB and TB minimum spacing requirements for equipment table below.*** IP20 finger-safe under specific conditions, see data sheet page 5.† Optional covers are available. Not IP20, but provide a safety benefit.††No, except: Y es, if single pole units installed with proper spacings.Power distribution and terminal block minimum spacing requirements for equipment508A branch circuits 3/8”1/2”1/2”1995 HVAC3/8”1/2”1/2”Note: Refer to specific UL standards for complete spacing details.(NEC 670.3(A)), and HVAC equipment (NEC 440.4(B)) is required by the NEC.Power distribution and terminal blocks not marked with a component SCCR are typically one of the weakest links in a control panel’s equipment SCCR and may limit the equipment SCCR to no more than 10 kA. The PDBFS_ and PDB_ products have the increased spacing required for use in feeder circuits of equipment listed to UL 508A (UL 1059 terminal blocks must be evaluated for proper spacings). Also, for building wiring systems, the PDBFS_ andPDB_ power distribution blocks can be used to meet the 2014 NEC requirements in section 376.56(B) for power distribution blocks in wireways.See the last page of this data sheet for SCCR tools and resources to help you further understand and solve your SCCR needs.4Technical Data 10536Effective June 2021Finger-safe power distribution blocks/bussmannseriesUpstream fusing for SCCR and minimum enclosure dataThis table contains the tested SCCR levels for each PDBFS power distribution block using the specified lineside and loadside conductors and Bussmann series Class J, RK1, RK5 and T fuses. Using these tested SCCR levels also requires the power distribution block be installed in anenclosure with the minimum size indicated for each catalog number.PDBFS2202/0 - #8#4 - #1220010060200200 kA 16 x 16 x 6.75#4 - #1417510030175100 kA 2001006020050 kA PDBFS303350 - #6350 - #6400200100400200 kA 36 x 30 x 12.625PDBFS330500 - #6#2 - #6400200100400200 kA 24 x 20 x 6.75#6 - #142001006020050 kA 17510030175100 kA PDBFS377300 - #4#4600400200600200 kA 24 x 20 x 6.75400200100400100 kA #4 - #142001006020050 kA #4#460040020060050 kA PDBFS500350350600400200600200 kA 36 x 30 x 12.625350 - #4350 - #4600400200600100 kA PDBFS504500500600600200800**200 kA 36 x 30 x 12.625500 - #6500 - #6600400200600100 kAAmpacities 75°C per NEC ® Table 310.16 and UL 508A Table 28.1.* Class G 60 A (SC-60) or less or Class CC 30 A (LP-CC-30, FNQ-R-30, KTK-R-30) or less are suitable for all SCCRs in this table.** Class L 800 A (KRP-C 800_SP) or less fuses suitable for this particular SCCR case.Upstream circuit breakers for SCCR and minimum enclosure dataThis table contains the tested SCCR levels for each PDBFS power distribution block using the specified lineside and loadside conductors and Eaton and General Electric circuit breakers. Using these tested SCCR levels also requires the power distribution block be installed in an enclosure with the minimum size indicated for each catalog number.PDBFS SCCR as rated with Eaton circuit breakersPDBFS2042/0 - #82/0 - #865480E125H, EGB125, E125B, EGE125,E125G, EGS125, E125S, PDG13P , PDG13M12516 x 16 x 6.75PDBFS330500 - #3#2 - #814480LGH400, L400H, LGE400, L400E, LGS400, L400S, PDG33M, PDG33G, PDG33K 40024 x 20 x 6.7525LGC400, L400C, LGU400,L400U, LGX400, L400X, PDG33P PDBFS377(2) 300 - #2#430480LGH600, L600H, LGE600, L600E, LGS600, L600S, PDG33M, PDG33G, PDG33K60024 x 20 x 6.75#618#814#442LGC600, L600C, LGU600,L600U, LGX600, L600X, PDG33P#635#8145Finger-safe power distribution blocksTechnical Data 10536Effective June 2021/bussmannseriesPDBFS SCCR as rated with General Electric circuit breakersPDBFS2042/0 - #82/0 - #848016 x 16 x 6.7525SEHA, PEAC, PEBC,PEAE, PEBE150PDBFS2202/0 - #8#4 - #1265480SELA, PEAN, PEBN 15016 x 16 x 6.7525SEHA, PEAC, PEBC,PEAE, PEBE150PDBFS303250 - #6350 - #665480SFLA, PEDN, PEEN 25024 x 20 x 6.75250 - #635SFHA, PEDE, PEEE 2503/0 - #6350 - #665SELA, PEAN, PEBN 15025SEHA, PEAC, PEBC,PEAE, PEBE150PDBFS330250 - #6#2 - #1265480SFLA, PEDN, PEEN 25024 x 20 x 6.7535SFHA, PEDE, PEEE 2503/0 - #665SELA, PEAN, PEBN 15025SEHA, PEAC, PEBC,PEAE, PEBE150Specified installation conditions for IP20 finger-safe ratingsThis table contains the installed wire and trim lengths, and other conditions the PDBFS power distribution blocks need in order to be compliant withIP20 specifications. IP20 compliance status is indicated in the lineside and loadside wire port and terminal screw opening columns.PDBFS2202/0 - #80.75 (19)Y es Y es #4 - #14Top row 0.55 (14), Bottom row 0.85 (22)Y es Y es Screws fully opened N/A Y es No wire in hole No N/A PDBFS303350kcmil - 2/01.35 (34)Y es Y es 350kcmil - 2/01.25 (32)Y es Y es 1/0 - #6No Y es 1/0 - #6No Y es PDBFS330500 - 250kcmil1.25 (32)Y esY es #2 - #14Top row 0.59 (15), Bottom row 1.2 (30)Y es Y es 4/0 - #6No Y es Screws fully opened N/A Y es No wire in hole Y es N/A PDBFS377300kcmil - 4/0Top row 1.15 (29)bottom row 1.4 (36)Y esY es #4 - #14Top row 0.55 (14), Middle row 1.00 (35), Bottom row 1.22 (31)Y es Y es 3/0 - #4No Y es Screws fully open N/A Y es Screws fully open N/A No No wire in port Y es N/A No wire in port No N/A PDBFS500350kcmil - 2/01.25 (32)NoY es 350kcmil - 2/01.25 (32)Y esY es 1/0 - #4No Y es 1/0 - #4No Y es Screws fully opened N/A No Screws fully open N/A No No wire in port No N/A No wire in port No N/A PDBFS504500 - 350kcmil 1.25 (32)Y esY es 500 - 350kcmil 1.25 (32)Y esY es 300 - #6No Y es 300 - #6No Y es Screws fully open N/A No Screws fully opened N/A No No wire in portNoN/ANo wire in portNoN/A6Technical Data 10536Effective June 2021Finger-safe power distribution blocks/bussmannseriesDimensions — in (mm)PDBFS2201.03 (26) 3.73 (95) 2.15 (54) 3.55 (90) 2.92 (74)0.20 (5)0.40 (10)N/A PDBFS3031.54 (39) 4.66 (118) 2.87 (73) 4.49 (114) 3.82 (97)0.20 (5)0.44 (11)N/A PDBFS3301.54 (39) 4.66 (118) 2.87 (73) 4.49 (114) 3.82 (97)0.20 (5)0.44 (11)N/A PDBFS3771.88 (47) 4.66 (118) 2.93 (74) 4.49 (114) 3.82 (97)0.20 (5)0.44 (11)N/A PDBFS500 2.37 (60) 4.66 (118) 2.60 (66) 4.49 (114) 3.82 (97)0.20 (5)0.44 (11)N/APDBFS5042.54 (64)4.49 (114)3.15 (80)—3.82 (97)0.20 (5)0.35 (9)1.81 (46)LinesideLoadsideLinesideLoadsidePDBFS220PDBFS204PDBFS303PDBFS3307Finger-safe power distribution blocksTechnical Data 10536Effective June 2021/bussmannseries LinesideLoadsideLinesideLoadsideLinesideLoadsidePDBFS377PDBFS500PDBFS504Multi-pole block gangingPDBFS power distribution blocks are single-pole devices that can be ganged for the required number of poles using the interlocking dovetail pins that are pre-installed on each block.To interlock and gang two or more blocks (DIN-Rail or panel mount):•Place blocks of the same catalog number side-by-side and slide the dovetail pin of one block into the reciprocal slot on the other and press together until fully seated and the backs of both blocks are coplanar.•Repeat the step above until the number of desired poles are gangedNote: Dissimilar PDBFS blocks can be ganged together. E.g., a PDBFS204 can be ganged with a PDBFS220 using the interlocking dovetailing pins. Ganging a PDBFS504 with any other PDBFS will prevent DIN-Rail mounting.Dovetailing feature permits easy ganging for multi-pole applications8Finger-safe power distribution blocksTechnical Data 10536Effective June 2021Eaton, Bussmann and OSCAR are valuable trademarks of Eaton in the U.S. and other countries. Y ou are not permitted to use the Eaton trademarks without prior written con-sent of Eaton.CSA is a registered trademark of the Canadian Standards Group.NEC is a registered trademark of the National Fire Protection Association, Inc.UL is a registered trademark of the Underwriters Laboratories, Inc.Eaton1000 Eaton Boulevard Cleveland, OH Bussmann Division 114 Old State Road Ellisville, MO 63021United States/bussmannseries © 2021 EatonAll Rights Reserved Publication No. 10536June 2021Follow us on social media to get thelatest product and support information.For Eaton’s Bussmann series product information,call 1-855-287-7626 or visit:/bussmannseriesThe only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.DIN-Rail mountingAll versions of the Bussmann series PDBFS power distribution blocks can be DIN-Rail mounted except for the PDBFS504, which can only be panel mounted.It is recommended for multi-pole applications that the individual blocks be ganged using the included dovetailing feature. See Multi-pole block ganging for details.To mount, perform the following:•Using an appropriate size flat blade screw driver, open the DIN-Rail latch that is on the lineside of each block.•Hook the loadside DIN-Rail tabs onto the lower edge of the 35 mm DIN-Rail•Rotate the block(s) up until they are seated over the upper and lower edges of the DIN-Rail•Push the DIN-Rail latch(es) down and into the locked position.To remove blocks, reverse the previous steps.Note: To prevent damage to the block housing when torquing the terminal screws, DIN-Rail end stops are required on each side of the block or ganged blocks.The recommended Bussmann series DIN-Rail end stops are:BRKT-NDSCRW2DIN-Rail end stop with screw-clamp anchorPanel mountingAll Bussmann series PDBFS power distribution blocks can be panel mounted. It is recommended for multi-pole applications that the individual blocks be ganged using the included dovetailing feature. See Multi-pole block ganging for details.Use two (2) suitable length #10 or M5 screws for each block being mounted. Use four (4) screws for each PDBFS504 block. The max torque for the mounting screws is 17 in-lbs (1.92 N •m).SCCR tools and resourcesEaton offers many resources that help customers understand and assess their SCCR needs.Please use the following whenever you have questions, concerns or just need help with SCCR ratings.Engineering services for SCCROSCAR™ compliance software eliminates the guesswork in equipment SCCR calculations.This innovative OSCAR compliance software assists customer compliance with new Code and standards requirements for short-circuit current ratings as they relate to control panels, equipment and assemblies. Go to and request a seven-day free trial.If your equipment SCCR needs improvement, contact the Bussmann Application Engineers for a free design review. Call toll-free1-855-BUSSMANN (855-287-7626) or email FuseT *************.Online SCCR tools and publications•Free SCCR Protection Suite online tool. An easy, fast way to search for components and their SCCRs. Visit .•Application notes:• Developing an effective SCCR plan for facilities and purchasers of industrial equipment — publication no. 10367•Developing an equipment SCCR standard for manufacturers of industrial equipment — publication no. 10368•Four steps to determine equipment SCCR — publication no. 10538• Equipment SCCR made easy brochure — publication no. 10374•SPD (Selecting Protective Devices) handbook; over 250 pages covering the application of overcurrent protective devices, SCCR and more — publication no. 3002。
BTS3900A 产品编码对照表
BOM编码:01060361展开层数:3展开层数序列号编码01060361110219016621021127143202112731330415006034041500593504150047360211277822021127093102112723320211272933041500603404150059350415004722521127373202120461330212046434003020DQY35003020HFD3603301000737040125333801602023639026010496310026010316312021020357313026010032314021100041315021100015316021100144317040902252302120467310210300773701902012738003020HBC31004090219311026010382312026010346313026010333314026010550315026010527316026010302317026010526318016020300319016020298 320016020288 321016020286 322016020289 2402315692 31003020HXM 32021211183 33029041123 34026010526 35026010317 36026010418 37027060125 38047030041 3907090975 310014990077 311014990076 312090010094 313090010052 314029040626 315063200084 2502315743 31003020HYL 32027060124 33014990076 34026010418 35026010526 36026010317 37026010527 38029041125 39047030042 31007090975 311021211183 312090010094 313090010052 314014990077 315029040626 316063200084 2602315819 3102120458 3202315528 33003030HNK 34021135211 35021135212 3602112722 37063200084 2702315639 31003020HPT32003020GKE 33021135260 34026020131 35026020197 28003020FED 31019020076 32014060235 33014060060 3407010747 35016070004 36021135144 37026010585 3803018455 2904070020 32014060191 33025050177 34014060050 21002130608 21102313069 21202315111 31003020DTN 33003020EAE 3504045385 36026020113 38021030034 39003020DNF 310029040626 311026010302 312026010526 21302315686 32003030HVX 35021100041 36026010298 37026010526 38026010527 39021030076 310021201001 311026010316 312014990076 31304150063 314063160007 315005020BCK 21404050036 21504050017 21604050097 21704050098 2180405009921904050100 220021140585 22102234487 222031504391 223031504393 22404070027 31014060050 32014060191 33025050209 225029042533 226029042534 12027060133 21027060134 31027010148 32027010159 33027010200 34027010230 35027010240 36027010242 37027010246 38027010247 39027010248 310027150006 311027150010 312027150017 22027060135 31027010115 32027010118 33027010139 34027010164 35027010166 36027010169 37027010170 38027010172 39027010178 310027010186 311027150017 23027060136 31027010134 32027010157 33027010162 34027010180 35027150006 36021150158 37021150173 24027060137 3102701014333027010152 34027010157 35027010202 36027010203 37027010206 38027150006 25027060131 31014040137 3204026159 3304026160 34027150001 35027150009 36027150002 37027150008 312025070076 313025070017 314025070133 315025070018 316014040201 317014040222 318027020067 26027060139 3102236756 3202236758 3302236757 3402236759 3502236760 3602236761 3702237169 3802237173 3842237326 3852237327 3902237170 31002237174 31102237168 31202237172 31302237171 31402237175 31502236769 31602236770 31702236771 31802236772 31904026160 32004060229 321014170060 322030070011324021101240 325027150064 32604047376 327027150041 328030030071 1302237164 254027101 31014080082 32025050014 2202210177 23028050001 24021101239 25021101240 26021101323 27021101324 28021101325 29021101326 210021101327 211021101321 212021101322 214028040009 215029080015 21602235738 38029040428 39029040429 312030040054 217014170017 218014170059 219014170060 220014170023 221014170147 222014170020 223014170016 224014170002 225031183045 226031183047 227014170005 228014170096 229014180221 230014180185 231028040023 232028040011 233028040013 234028010026 235063200065 236021100015238021100144 1404000417 2104120002 31014060191 32014990083 33025070055 2204120003 31014060191 32025050107 23014040200 24025030461 24525030669 25025030433 26025030432 27025030427 28025030428 29025030024 210025030026 211025030431 212025030429 213025030403 21404070026 31025050207 32014080128 21604047376 31014040253 32014040252 33025070071 217025030190 21804150051 31014060252 32025030708 33025030709 34014170005 21904080029 31014080128 32025050207 22004070023 31025050207 32014080128 22104070025 31025050207 32014080128 22204150049 31014170005 3201406025233025030704 34025030705 22304150052 31025030699 32014170023 33014170017 22404047466 31014080114 33025050238 1502237165 21021150606 22021150484 23021170210 1602237166 2102112567 31021020338 32016100026 3304047592 3404047535 3504047552 36026010531 3704044773 38029040013 39021100041 310021100015 311021100144 2202112574 31021020339 32032010084 33014120129 34003020FKK 35016100026 3603025469 37026010526 38026010542 39026020141 310029040013 311029042398 31204080011 31304080010 31404041838 31504150003 316026020161 317026010531 318026020075 31904044773 32004046897322003020HRY 323021100041 324021100015 325021100144 2302080998 31021011082 3202080982 2402080023 25024020615 26024020614 2702350374 31021040631 3202233083 33029041150 34029040738 35030011009 2902314551 3103028906 32003030EDY 33014120141 34014120129 35021040936 3604046764 37026010316 38031070008 39021100041 31004043189 31104045462 31204046763 314030011572 315031017607 316029020502 21002112732 31021020356 32033010007 34016020236 3504090221 3604150048 37026010032 21102112733 31021020353 32032010084 33003020HRY 34003020FKK 35003020HFD 3603301000738003020FDR 3904012538 310026020079 311026010316 312026010421 21202120469 31021030080 3204090224 33026010526 35026010421 36029042537 37029040626 38029040013 39029041013 310003020HBC 311016020286 312016020289 313014180245 314014120129 315021100041 316014170017 213014180178 21402234032 21504043955 34014120021 35014110033 36014170002 37025030044 38025030052 21604046176 31014170009 32014170005 33025030608 217028010104 218033010293 219033010089 220033010007 221033010286 222025050163 17030000094 21030011636 31030020487 32030050606 33030050607 34030040139 3503010000522030011637 23030011552 31030035257 32030020454 33030040258 34030050081 35030050082 24030011634 25030011635 26030011655 27030011605 28030011659 1802231914 21088020648 22088020649 23088020650 24088021088 25088021089名称版本图纸版本无线通信设备-HUAWEI BTS3036A-BTS3036A 室外型宏蜂窝基站 B.1-无线基站-BTS3036A-GM5C2BTS-BTS3036A 室外宏基站 B.1-总装机箱-BTS3036A-GM8B1DMC-BTS3036A 室外宏铝制总装机柜 D.1-总装机柜-HERT MPE-WD2B4RFC-6RFU总装机柜B E.1-电源电缆-0.90m-10mm^2-蓝-(OT10-4)-(H07Z-K-10^2蓝)-(OT10-6)-LSZH B.2-电源电缆-0.90m-10mm^2-黑-(OT10-4)-(H07Z-K-10^2黑)-(OT10-6)-LSZH B.2-A.3-电源电缆-0.85m-16mm^2-黄绿-(OT16-6)-(H07Z-K-16^2黄绿)-(OT16-6)-LS总装机柜-BTS3900A-GM5B2OPC-APM30总装机柜 B,with PDU(220V) A.5-总装机箱-BTS3036A-GM8B2DMC-BTS3036A 室外宏钢制总装机柜 B.2-总装机柜-HERT MPE-WD2B1OPC-APM30总装机柜A F.1-总装机柜-HERT MPE-WD2B3RFC-6RFU总装机柜A E.1-电源电缆-0.90m-10mm^2-蓝-(OT10-4)-(H07Z-K-10^2蓝)-(OT10-6)-LSZH B.2-电源电缆-0.90m-10mm^2-黑-(OT10-4)-(H07Z-K-10^2黑)-(OT10-6)-LSZH B.2-A.3-电源电缆-0.85m-16mm^2-黄绿-(OT16-6)-(H07Z-K-16^2黄绿)-(OT16-6)-LS总装机柜-HERT MPE-WD2B9RFC-3RFU总装机柜B C.2-配电盒-HERT MPE-WD2EDCDU-02-直流配电单元-带防雷板 C.1-风机盒-HERT MPE-WD2E1OCFB-室外机柜风扇盒 C.1-制成板-MPE-WD22FEMA-风扇环境监控板 C.1A制成板-HERT MPE-WD22TSIB-温度传感器板-4*4 A.5A门磁开关-常开-隐蔽安装型 C.1-内部成套电缆-HERT MPE-HRFC-3机柜内部成套电缆 C.2-空气开关-磁断路器-80VDC-100A-1极-2000A-Medium Delay-19*47*63-常开A.9-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M4*10-镀彩锌标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*6-镀彩锌B.3-A.1-户外机柜机架-DKBA4.100.1024-HERT MPE V200R301 3RFU直通风室外机柜(标准紧固件-十字槽盘头螺钉-GB818-85-M3*8-不锈钢- B.3-非金属件-DKBA0.480.0457-线扣-GT-100M---100*2.5mm-强度8.1kg B.1-非金属件-DKBA0.480.0457-线扣-GT-150I-150*3.6mm-强度18.2kg B.1-非金属件-DKBA0.480.0457-线扣-GT-300I-300*3.6mm-强度18.2kg B.1-线束-HERT MPE-HRFC-3机柜内置蓄电池电缆线束 B.1-配电盒-Hert MPE-WD2E2HPDU-HAPM配电盒-220VAC三相输入-分体式 E.1-盒式模块-DKBA4.104.2053MX-配电框-436mm*86.1mm*355mm-配电框 A.1-电源避雷器-65KA(8/20us)-1500V-220VAC/380AC-冷压端子-螺钉固定 A.5-制成板-HERT MPE -WD22DLPB-直流电源防雷板 A.17B线束-Hert MPE-WD2E1HPDU-HAPM配电盒电缆线束 D.2-标准紧固件-1型六角螺母-A级和B级-GB6170-86-M6-镀彩锌 A.3-标准紧固件-标准型弹簧垫圈-GB93-87-6-镀彩锌 A.3-标准紧固件-平垫圈-A级-GB97.1-85-6-镀彩锌 A.4-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M4*8-镀彩锌A.3-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*12-镀彩锌标准紧固件-十字槽沉头螺钉-GB819-85-M3*6-镀彩锌 A.4-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌B.1-断路器-断路器-250VAC-16A-3极-1.5KA-中延时-63.5*57.53*80mm-无-面板A.6-断路器-液压磁断路器 -250VAC/80VDC-10A-1极-1.5KA-中延时-63.5*19.18A.4-断路器-磁断路器-80VDC-30A-1-600A-C-19*39*48-无-面板卡装-摇键式-防A.5-断路器-磁断路器-80VDC-12A-1-600A-C-19*39*48-无辅助开关-面板卡装-摇A.6-断路器-磁断路器-80VDC-4A-1-600A-C-19*39*48-无-面板卡装-摇键式-防误功能模块-BTS3036-GM5MBDRFU-双密度射频与滤波单元-M900 C.1-制成板-BTS3036-GM5BDBRU-DRFU 基带与射频单元-1*1 F.1BA.2-压铸机加壳体-DKBA4.140.2029MX-DRFU 模块组件-BTS3036-366.9*68.5*30产品标签-DKBA8.817.1955-M900标签-BTS312-20x6-3M7815 C.20标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌A.3-A.5-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.8-88-M3*10-镀彩锌标准紧固件-十字槽盘头螺钉-GB818-85-M2.5*6-镀彩锌 A.3-天馈组件-DDPE-GSM BTS3036-Tx:925MHz~960MHz,RX:880MHz~915MHz-DIN/fA.5-射频隔离器-920--960MHz-45dB.-1.2-150W-Dual Junction A.8-E.1-片式厚膜电阻器-250W-50ohm-+/-5%-24.80*9.53mm-射频高功率法兰安装负B.1-连接器附件-DIN7/16母型同轴连接器防尘帽-配DIN7/16 母型同轴连接器-1连接器附件-SMA母型同轴连接器防尘帽-配SMA母型同轴连接器-1:1- B.1-A.3-固体生产辅料-导热垫-406.4mm(L)*203.2mm(W)*2.5mm(H) -导热系数1.0W/固体生产辅料-导热硅脂-/-/-元器件导热 A.2-B.1-产品标签-DKBA8.817.1003-产品防拆警告标签(1PCS含标签1张)-50mm*12mm塑胶件-DKBA8.034.0704-Dust-proof Cushion-Metro 3600 B.2-功能模块-BTS3036-GMKM1DRFU-双密度射频与滤波单元-M1800 B.1-制成板-BTS3036-GMKBDBRU-DRFU基带与射频单元-1*1 E.1BA.7-天馈组件-DDPD-GSM BTS3036-Tx:1805MHz~1880MHz,RX:1710MHz~1785MHz-D连接器附件-SMA母型同轴连接器防尘帽-配SMA母型同轴连接器-1:1- B.1-标准紧固件-十字槽盘头螺钉-GB818-85-M2.5*6-镀彩锌 A.3-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌A.5-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.8-88-M3*10-镀彩锌A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*12-镀彩锌产品标签-DKBA8.817.1959-M1800标签-BTS312-20x6-3M7815 B.20射频隔离器-1805--1880MHz-45dB.-1.2-150W-Dual Junction A.7-E.1-片式厚膜电阻器-250W-50ohm-+/-5%-24.80*9.53mm-射频高功率法兰安装负A.2-压铸机加壳体-DKBA4.140.2029MX-DRFU 模块组件-BTS3036-366.9*68.5*30A.3-固体生产辅料-导热垫-406.4mm(L)*203.2mm(W)*2.5mm(H) -导热系数1.0W/固体生产辅料-导热硅脂-/-/-元器件导热 A.2-B.1-连接器附件-DIN7/16母型同轴连接器防尘帽-配DIN7/16 母型同轴连接器-1B.1-产品标签-DKBA8.817.1003-产品防拆警告标签(1PCS含标签1张)-50mm*12mm塑胶件-DKBA8.034.0704-Dust-proof Cushion-Metro 3600 B.2-C.1-功能模块-BTS3036-GM5M1BBU-GSM分布式基站主控单元(基本配置)-无防雷单风机盒-HERT BBU-WD2E1FAN-2U风扇模块 B.1-功能模块-HERT BBU - WD22MPEUA--48V 电源环境接口单元 A.5-成品板-HERT BBU-WD22GTMU1-GBTS 主控传输单元 (4E1+2FE+6CPRI) 含CANB.1-拉手条-DKBA4.130.6965-4HP假面板拉手条-154.5*16*19.8-钣金 A.1-拉手条-DKBA4.130.6966-电源板假面板拉手条-85.3*14.3*40.1-钣金 A.2-总装机箱-HERT BBU-WD2BBBUC-HERT BBU插框 A.2-塑胶件-DKBA8.034.0704-Dust-proof Cushion-Metro 3600 B.2-功能模块-HERT BBU-WD2M1UEIU-通用环境接口控制单元 A.2-制成板-HERT BBU-WD22UEIB-通用环境接口底板-1*2 B.1B制成板-HERT BBU-WD22UEIC-环境监控接口板-1*2 A.20BA.1-拉手条-DKBA4.130.7042MX-UEIU 拉手条-85.3(L)*40.1(H)*264.0(D)-Shee非标紧固件-DKBA0.480.0268-PCB紧固螺钉-PCB-M3X6-PCB板固定 A.3-非标紧固件-DKBA8.610.4681-六角支柱-28.5-阴M3*6-阳M3*5-HERT BBU A.1-制成板-DBS3800-WD22UELP-通用E1/T1雷电防护单元 B.1A气体放电管-90V-5000A-Φ8*10mm-Φ1mm*3 C.3-电缆连接器-D型(三排)-26PIN-弯脚,母座-PCB焊接型-引脚长3.2mm,螺母规C.1-电缆连接器-D-SUB型-25PIN-弯母-PCB焊接型-螺母UNC 4-40,引脚长3.1mm D.1-金属膜电阻器-2W-4.7ohm-±5% A.4-拨码开关-SPST-24VDC-0.025A-PCB直插-3.2mm-4bit-侧面-11.7*9.7*9.7mmF.2-拉手条-DKBA4.130.6870MX-WD22UELP 拉手条-154.45*20.5*19.8mm-钣金A.1-B.4-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-(GB9074.4-88)-M2.5*6-Zi印制板-BBU3806-WD22UELP-通用E1/T1防雷单元-2*1 C.3A信号电缆-E1转接电缆-0.65m-(D25公)-(CC8P0.48黑(S))-(D26公(三排))A.2-电缆连接器-D型-26PIN-公头-电缆焊接型-三排 B.5-对称双绞线缆-100ohm-SEYVP-0.48mm-26AWG-8对-黑 B.2-电缆连接器-D型-25PIN-公头-电缆焊接型 A.7-一次电源--33degC-65degC-90V-290V-(-53.5)V/30A-AC/DC系统电源 D.1-功能模块-WCDMA NodeB BTS3812A-EPMU01-电源系统监控模块-无- C.3-功能模块-HUAWEI BTS3012AE -GM51DEPM-电源系统监控模块 C.1-制成板-BTS3012AE-GM51DPMA-电源监控面板-2*2 A.7A制成板-BTS3012AE-GM51DPMP-电源监控电源扣板-1*1 C.1AA.80单根电缆-监控板通信电缆-0.2m-(IDC40双直)-(扁平排线40)-(IDC40双直)非标紧固件-DKBA8.045.0190-Hexagonal Post 32.0-双阴M3x6(两端）-固定B.3-盒式模块-DKBA4.127.0703MX-电源监控模块-106.1*88.1*243-盒式模块A.2-制成板-BTS3012AE-GM51DPMU-电源监控单板-1*1 E.1A产品标签-DKBA8.817.1003-产品防拆警告标签(1PCS含标签1张)-50mm*12mmB.1-标准紧固件-十字槽沉头螺钉-GB819-85-M3*6-镀彩锌 A.4-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌功能模块-BTS3036系列-GM5M1GATM-GSM 天线&塔放控制模块 C.1-成品板-BTS3036系列-GM52DATU-天线&塔放控制板 B.1-非金属件-DKBA0.480.0457-线扣-GT-100M---100*2.5mm-强度8.1kg B.1-标准紧固件-十字槽沉头螺钉-GB819-85-M4*10-镀彩锌 A.4-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*12-镀彩锌盒式模块-DKBA4.106.1629-DATM盒体-436.0*41.6*310.0-1U盒式插箱 A.1-塑胶件-DKBA8.079.0205-3PIN导光柱--BTS3012 A.3-B.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*6-镀彩锌连接器附件-SMA母型同轴连接器防尘帽-配SMA母型同轴连接器-1:1- B.1-电源电缆-0.48m-(D3公-2公1母)-(2*18UL3385黑)-(H4(3.96))-LSZH B.2-散热器件-73080113-S16单板电源散热器-S16单板电源-黑色 A.3-单板软件-WD22MPTB0-GM5DATU04-GM52DATU单板运行程序-FLASH-加载型A.6-外购电缆-SFP高速传输电缆-4m-(SFP20公)-(CC2P0.5黑)-(SFP20公)-室内型B.3-C.3-外购电缆-SFP高速传输电缆-1m-(SFP20公)-(CC2P0.5黑)-(SFP20公)-室内型外购电缆-SFP高速传输电缆-1.5m-(SFP20公)-(CC2P0.5黑)-(SFP20公)-室内A.7-A.5-外购电缆-SFP高速传输电缆-2m-(SFP20公)-(CC2P0.5黑)-(SFP20公)-室内型A.8-外购电缆-SFP高速传输电缆-0.6m-(SFP20公)-(CC2P0.5黑)-(SFP20公)-室内外购电缆-SFP高速传输电缆-0.3m-(SFP20公)-(CC2P0.5黑)-(SFP20公)-室内A.8-面板-DKBA4.124.1741MX-DRFU假面板-HERT MPE V200R301-钣金 A.1-组件｜附件-WCDMA NodeB BTS3812A-电源假面板 C.1-BTS3900A快速安装指南-(V300R008_01) B.2-BTS3036A Quick Installation Guide-(V300R008_01) A.1-信号电缆-0.65m-(D25公)-(CC8P0.48黑(S)-I)-(D26公(三排))-LSZH A.3-电缆连接器-D型-25PIN-公头-电缆焊接型 A.7-电缆连接器-D型-26PIN-公头-电缆焊接型-三排 B.5-对称双绞线缆-100ohm-SEYYP-0.48mm-26AWG-8对-黑-低烟无卤阻燃电缆B.2-A.1-产品标签-DKBA8.817.8344-110V交流机柜配置标签-BTS3036A-300*150-PETA.1-产品标签-DKBA8.817.8345-220V交流机柜配置标签-BTS3036A-300*150-PET天馈组件-BTS3036A天馈组件 A.2-天馈组件-GSM BTS 850M天线 A.2-A.3-定向天线-806~960MHz-16.5dBi-±45°双极化-0r-600W-否-7/16 DIN Fema定向天线-806~960MHz-15dBi-±45°-6r-600W-否-7/16 DIN Female-0m A.3-定向天线-806~960MHz-垂直极化-0r-500W-不带支架,支架编码27150017-7/B.2-定向天线-806~960Mhz-17dBi-90deg-单极化-0r-500W-自带支架-7/16DIN B.3-C.1-定向天线-806~960MHz-15.5dBi-65deg-双极化-0r-500W-C-PANEL-不带支架A.6-定向天线-806~960MHz-18dBi-65deg-双极化-0r-500W-C-Panel-不带支架-DB.2-定向天线-806~960MHz-15dBi-65deg-X pol.-6r-600W-自带支架-7/16"DIN-B.2-定向天线-806~960MHz-17dBi-90deg-X pol.-0r-500W-自带支架-7/16"DIN-B.2-定向天线-806-960MHz-18dBi-65deg-X pol.-6r-500W-自带支架-7/16"DIN-E.1-天馈附件-天线支架-配1.3m F-panel天线-调角0~16°-配KATHREIN天线-普E.1-天馈附件-俯仰调节和固定件-配2580mm F-Panel天线-调角0~8度-配KATHREC.1-天馈附件-天线支架-蜂窝移动通信-3点支撑支架/调角范围0~8°-用于KATH天馈组件-GSM BTS 900M天线 A.1-A.3-定向天线-880~960MHz-17dBi-±45°双极化-0r-500W-否-7/16 DIN FemaleA.3-定向天线-880~960MHz-15dBi-±45°双极化-0r-500W-否-7/16 DIN FemaleA.3-全向天线-870~960MHz-11dBi-垂直极化-全向-500W-0r-7/16 DIN Female-自A.3-全向天线-870~960MHz-11dBi-垂直极化-全向-500W-3r-7/16 DIN Female-自A.3-定向天线-880~960MHz-15dBi-±45°-7r-500W-自带支架-7/16 DIN FemaleA.3-定向天线-870~960MHz-14dBi-定向天线-0r-500W-自带支架-7/16 DIN Fema全向天线-870~960MHz-11dBi-全向-500W-5r-7/16 DIN Female-自带支架A.3-全向天线-870~960MHz-11dBi-全向-500W-0r-7/16 DIN Female-自带支架A.3-B.2-定向天线-870~960MHz-17dBi-90deg-垂直极化-0r-500W-否-7/16 DIN Fema定向天线-880~960MHz-±45°-6r-500W-否-7/16 DIN Female-0m B.2-天馈附件-天线支架-蜂窝移动通信-3点支撑支架/调角范围0~8°-用于KATHC.1-天馈组件-GSM BTS 1800M天线 A.1-A.3-定向天线-GSM900/1800MHz（双频）-15dBi/16.5dBi-±45°双极化-0r-150A.3-定向天线-1710~1990MHz-18dBi-±45°极化-6r-200W-否-7/16 DIN FemaleA.3-全向天线-1710~1880MHz-11dBi-垂直极化-全向-200W-0r-7/16 DIN FemaleA.3-定向天线-1710~1880MHz-17.5dBi-±45°-0r-250W-自带支架-7/16 DIN FeE.1-天馈附件-天线支架-配1.3m F-panel天线-调角0~16°-配KATHREIN天线-普工程安装件--DCS1800基站定向天线俯仰调节器-- A.20工程安装件--M1800基站双极化定向天线俯仰调节器-- A.20天馈组件-GSM BTS 1900M天线 A.1-C.2-定向天线-1710~2170MHz-18dBi-双极化--0r-150W-自带支架-7/16DIN-FEMA定向天线-1710~1990MHz-8dBi-±45°极化-0r-200W-否-7/16DIN/Female-0A.3-B.1-定向天线-1710~2170MHz-18dBi-65deg-+/-45°双极化-2r-300W-否-7/16DIA.3-定向天线-1710~1990MHz-18dBi-±45°极化-6r-200W-否-7/16 DIN FemaleB.3-定向天线-1710~2170MHz-17dBi-90deg-+/-45°-2r-300W-不带支架-7/16DIA.4-全向天线-1850~1990MHz-11dBi-垂直-全向-200W-0r-7/16DIN Female-自带D.1-定向天线-1710~2200MHz-18dBi-65deg-双极化-0~10deg-0r-300W-不带支架E.1-天馈附件-天线支架-配1.3m F-panel天线-调角0~16°-配KATHREIN天线-普天馈组件-BTS3036&BTS3036A 每站点通用安装材料 B.1-射频同轴连接器-7/16DIN型-50ohm-插头/直式-公-配1/2英寸超柔跳线H.1-G.5B 单根电缆-射频电缆-2.5m-(DIN50直公-Ⅱ)-(COAX50-8.7/3.55)-(DIN50直公G.5B 单根电缆-射频电缆-1.5m-DIN50直公-Ⅱ-(COAX50-8.7/3.55)-DIN50直公-Ⅱ天馈附件-过墙密封窗-4*3孔-7/8英寸(馈管)-400mm*400mm-铝板 B.2-天馈附件-过墙密封窗-9*3孔-7/8英寸(馈管)-500mm*500mm-铝板 D.1-天馈附件-过墙密封窗-4*3孔-5/4英寸(馈管)-400mm*400mm-铝板 E.1-天馈附件-过墙密封窗-9*3孔-5/4英寸(馈管)-500mm*500mm-铝板 D.1-同轴电缆-铜包铝线-50ohm-13.5mm-8.7mm-3.55mm-黑色-超柔1/2英寸跳线F.1-同轴电缆-光滑铜管-50ohm-28mm-22.2mm-9mm-黑色 F.3-同轴电缆-光滑铜管-50ohm-27.8mm-21.5mm-9.3mm-黑色-7/8"铝电缆 A.5-同轴电缆-光滑铜管-50ohm-39.4mm-32.2mm-13mm-黑色G.1-C.1-射频同轴连接器-N(male)-7/16DIN(female)-50ohm-直式转换接头-N(公)-7射频同轴连接器-7/16 DIN-50ohm-直式/插头-母-配1/2英寸跳线-镀银 C.1-B.1-无源分路器-GSM/DCS-1分2大功率无源功分器-800~2200MHz-7~16DIN/Femal天馈组件-BTS3036A每扇区通用天馈安装材料包组 B.1-组件｜附件-一般地区7/8"铜馈线包-GBTS B.1-组件｜附件-寒冷地区7/8"铜馈线包-GBTS B.1-组件｜附件-一般地区5/4"铜馈线包-GBTS A.1-组件｜附件-寒冷地区5/4"铜馈线包-GBTS A.1-组件｜附件-一般地区7/8"铝馈线包-GBTS B.1-组件｜附件-寒冷地区7/8"铝馈线包-GBTS A.1-组件｜附件-BTS3036A-塔放包-一般地区-900MHz A.1-组件｜附件-BTS3036A-塔放包-寒冷地区-900MHz A.1-组件｜附件-BTS3036A-塔放包-一般地区-EGSM B.1-组件｜附件-BTS3036A-塔放包-寒冷地区-EGSM B.1-组件｜附件-BTS3036A-塔放包-一般地区-1800MHz A.1-组件｜附件-BTS3036A-塔放包-寒冷地区-1800MHz A.1-组件｜附件-BTS3036A-塔放包-一般地区-850MHz A.1-组件｜附件-BTS3036A-塔放包-寒冷地区-850MHz A.1-组件｜附件-BTS3036A-塔放包-一般地区-1900MHz A.1-组件｜附件-BTS3036A-塔放包-寒冷地区-1900MHz A.1-组件｜附件-GBTS-单双频合路器套件-一般地区 A.1-组件｜附件-GBTS-单双频合路器套件-寒冷地区 A.1-组件｜附件-GBTS-双双频合路器套件-一般地区 A.1-组件｜附件-GBTS-双双频合路器套件-寒冷地区 A.1-G.5B 单根电缆-射频电缆-1.5m-DIN50直公-Ⅱ-(COAX50-8.7/3.55)-DIN50直公-Ⅱ外部电源线-塔放PGND-2m-25mm^2-(OT25-8)-(227IEC02-25^2黄绿) E.5-裸压端子-OT-25mm^2-M8-镀锡-圆形裸端子 C.3-胶带-DKBA0.480.0497-防水胶带-50mm*1.65mm*3.0m C.3-非金属件-DKBA0.480.0393-PVC绝缘胶带 Scapa 2705---19mm*0.18mm*20mB.2-B.2-非金属件-DKBA0.480.0394-PVC绝缘胶带3M Super 33+---19mm*0.18mm*20mB.1-天馈附件-OOK Bias Tee (Indoor)-GSM-800MHz~960MHz-Din/Female,Din/MA.3-单根电缆-Bias-T射频电缆-2.2m-(SMA50弯公)-(RG316-50-1.5/0.5棕-Ⅰ)-C.1-天馈附件-OOK Bias Tee-GSM-800MHz~960MHz-Din/Female,Din/male,SMA/F纸包装容器-DKBA4.172.0082-纸箱-OptiX 单板总装-510*415*310 B.2A0组件｜附件-BTS3036A-发货附件 B.1-D.41单根电缆-交叉网线-2.00m-(网口8位-Ⅰ)-(CC4P0.5灰)-(网口8位-Ⅰ)-非屏网口连接器-8PIN-8bit-非屏蔽-水晶插头-配25050014 E.1-F.2-对称双绞线缆-100ohm-超五类线-0.51mm-24AWG-8芯-PANTONE 430U-配插头配套工具-防静电手套-中英文资料 A.2-导电材料-防静电手腕--300degC--300degC C.1-B.2-非金属件-DKBA0.480.0393-PVC绝缘胶带 Scapa 2705---19mm*0.18mm*20mB.2-非金属件-DKBA0.480.0394-PVC绝缘胶带3M Super 33+---19mm*0.18mm*20m非金属件-DKBA0.480.0393-红色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-非金属件-DKBA0.480.0393-黄色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-非金属件-DKBA0.480.0393-蓝色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-非金属件-DKBA0.480.0393-紫色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-非金属件-DKBA0.480.0393-橙色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-非金属件-DKBA0.480.0393-绿色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-非金属件-DKBA0.480.0393-白色PVC绝缘胶带-天馈-聚氯乙烯-天馈标识A.1-热缩套管-14mm-50%-黑色--55degC-105degC B.1-电缆标签-DKBA8.817.8282-射频成套电缆标签-BTS3036 A.1-组件｜附件-成套标签-GSM基站用-非天馈用 B.1-C.1-产品标签-DKBA8.817.0836-小区(包括CDU方式)电源线及小区号标签-2PCS/标签-88170837-GSM基站小区(包括CDU方式)中继线标签-4PCS/套 A.1A0胶袋-DKBA8.840.0069-防静电薄膜袋-所有产品-300*200-自封袋 D.2-裸压端子-OT-6mm^2-M4-镀锡-圆形预绝缘端子-12~10AWG-黄色 C.3-裸压端子-OT-25mm^2-M6-镀锡-圆形裸端子 C.3-裸压端子-OT-25mm^2-M8-镀锡-圆形裸端子 C.3-裸压端子-OT-6mm^2-M6-镀锡-圆形预绝缘端子-12~10AWG-黄色 C.3-裸压端子-OT-25mm^2-M6-镀锡-宽度小于12.4mm-OEM专用 A.9-裸压端子-OT-16mm^2-M6-镀锡-圆形裸端子 C.4-裸压端子-OT-10mm^2-M6-镀锡-圆形裸端子 C.5-裸压端子-OT-1.5mm^2-M4-镀锡-圆形预绝缘端子-22~16AWG-红色 C.3-BTS3036A电子手册-(V300R008_01) A.1-BTS3036A Electronic Documentation-(V300R008_01) A.1-裸压端子-OT-2.5mm^2-M4-镀锡-圆形预绝缘端子-16~14AWG-蓝色 C.3-裸压端子-单线冷压端子-1mm^2-5A-镀锡-插深6mm-黄色 C.1-线缆端子座-2PIN-顶部螺钉,水平引线-AWG 14-6-选用前试装 A.6-线缆端子座-8PIN-顶部螺钉/水平引线-AWG20-6 A.3-热缩套管-8mm-50%-黑色--55degC-105degC B.1-热缩套管-11mm-50%-黑色--55degC-105degC B.1-热缩套管-18mm-50%-黑色--55degC-105degC B.1-绝缘材料-阻燃型PVC波纹管-φ25 D.1-塑胶件-DKBA0.480.0238-Cable Tie-GT-300HDUV- 7.6X300-防紫外线耐寒,A.40非金属件-DKBA0.480.0457-线扣-GT-150I-150*3.6mm-强度18.2kgB.1-非金属件-DKBA0.480.0238-扎线带GT-300IUV（3.6*300）-防紫外线耐寒,黑B.1-非金属件-DKBA0.480.0457-线扣-GT-300I-300*3.6mm-强度18.2kg B.1-外部成套电缆-BTS3036A-外部成套电缆 B.1-中继电缆-10m-75ohm-4E1-2.2mm-(D26公(三排))-(SYFVZP75-1.2/0.25*8(SA.3-电缆连接器-D型-26PIN-公头-电缆焊接型-三排B.5-连接器附件-D型连接器转接用端子-OEM专用G.1-同轴电缆-SYFVZP-75-1-1x8-75ohm-9.65mm-1.2mm-0.252mm-华为白-140402E.1-中继电缆-10m-120ohm-4E1-0.4mm-(D26公(三排))-(120CC8P0.4黑) A.5-电缆连接器-D型-26PIN-公头-电缆焊接型-三排 B.5-对称双绞线缆-120ohm-SEYPVP-0.4mm-26AWG-16芯-黑色-室外型,OEM专用D.1-射频同轴连接器-SMB-75ohm-直/插头-母-配SYFVZ-75-1-1-镀金 C.2-A.6-电子电力线缆-300V/500V-227IEC10(BVV)-6mm^2-黑色护套(芯线:蓝,棕)-4A.5-电子电力线缆-300V-227IEC10(BVV)-2.5mm^2-绝缘颜色：黄/绿、蓝、黑、电子电力线缆-450V/750V-227 IEC 02(RV)-25mm^2-红-110A B.2-电子电力线缆-450V/750V-227 IEC 02(RV)-25mm^2-黑-110A B.2-电子电力线缆-450V/750V-227 IEC 02(RV)-16mm^2-红-85A B.2-电子电力线缆-450V/750V-227 IEC 02(RV)-16mm^2-黑-85A B.2-电子电力线缆-450V/750V-227 IEC 02(RV)-6mm^2-蓝-44A B.2-电子电力线缆-450V/750V-227 IEC 02(RV)-6mm^2-黑-44A B.3-电子电力线缆-450V/750V-227 IEC 02(RV)-25mm^2-黄绿-110A B.2-电子电力线缆-450V/750V-227 IEC 02(RV)-16mm^2-黄绿-85A B.2-C.1-电子电力线缆-300V-SJTW-0.82mm^2-18AWG-黑色护套(蓝,黑)-1A-圆2芯,OE信号电缆-1.6m-(网口8位-VI)-(CC4P0.48黑(S)-I)-(网口8位-VI)-LSZH A.2-对称双绞线缆-100ohm-SEYYP-0.48mm-26AWG-4对-黑-低烟无卤阻燃电缆B.2-E.1-网口连接器-单排-单端口-8PIN-8bit-屏蔽-插头-AWG 26-28AWG,内导体多股A.3-单根电缆-Bias-T射频电缆-2.2m-(SMA50弯公)-(RG316-50-1.5/0.5棕-Ⅰ)-射频同轴连接器-SMA-50ohm-弯式/插头-公型-配SFF-50-1.5-1-OEM专用A.5-射频同轴连接器-SMA-50ohm-直式/插头-公型-配SFF-50-1.5-1-OEM专用A.5-E.1-同轴电缆-7/0.17mm镀银铜包钢绞合导体-50ohm-2.5mm-1.55mm-0.54mm-棕色电子电力线缆-450V/750V-227 IEC 02(RV)-10mm^2-黄绿-62A B.3-电源电缆-0.7m-(D3母-2母)-(H07Z-K-2.5^2蓝+H07Z-K-2.5^2黑)-(2*OT2.5A.3-电缆连接器-D型-3PIN-母头-电缆焊接注塑型-无中间公端子G.1-A.4-电子电力线缆-450V/750V-H07Z-K-2.5mm^2-蓝-低烟无卤阻燃电缆,OEM专用A.3-电子电力线缆-450V/750V-H07Z-K-2.5mm^2-黑-29A-低烟无卤阻燃电缆,OEM裸压端子-OT-2.5mm^2-M4-镀锡-圆形预绝缘端子-16~14AWG-蓝色 C.3-监控和告警电缆-监控电缆-1.1m-(网口8位-VI)-(CC4P0.48黑(S)-I)-LSZH A.3-E.1-网口连接器-单排-单端口-8PIN-8bit-屏蔽-插头-AWG 26-28AWG,内导体多股对称双绞线缆-100ohm-SEYYP-0.48mm-26AWG-4对-黑-低烟无卤阻燃电缆B.2-信号电缆-1.1m-(网口8位-VI)-(CC4P0.48黑(S)-I)-(网口8位-VI)-LSZH A.2-对称双绞线缆-100ohm-SEYYP-0.48mm-26AWG-4对-黑-低烟无卤阻燃电缆B.2-E.1-网口连接器-单排-单端口-8PIN-8bit-屏蔽-插头-AWG 26-28AWG,内导体多股信号电缆-0.6m-(网口8位-VI)-(CC4P0.48黑(S)-I)-(网口8位-VI)-LSZH A.2-对称双绞线缆-100ohm-SEYYP-0.48mm-26AWG-4对-黑-低烟无卤阻燃电缆B.2-E.1-网口连接器-单排-单端口-8PIN-8bit-屏蔽-插头-AWG 26-28AWG,内导体多股A.4-电源电缆-0.7m-(D3母-2母)-(H07Z-K-1.5^2黑+H07Z-K-1.5^2蓝)-(2*OT2.5裸压端子-OT-2.5mm^2-M4-镀锡-圆形预绝缘端子-16~14AWG-蓝色 C.3-电缆连接器-D型-3PIN-母头-电缆焊接注塑型-无中间公端子G.1-电子电力线缆-450V/750V-H07Z-K-1.5mm^2-黑-低烟无卤阻燃电缆,OEM专用A.3-A.4-电子电力线缆-450V/750V-H07Z-K-1.5mm^2-蓝-低烟无卤阻燃电缆,OEM专用电源电缆-0.4m-6mm^2-黄绿-(OT6-4)-(H07Z-K-6^2黄绿)-(OT6-6)-LSZH A.2-电子电力线缆-450V/750V-H07Z-K-6mm^2-黄绿-低烟无卤阻燃电缆 A.2-裸压端子-OT-6mm^2-M6-镀锡-圆形预绝缘端子-12~10AWG-黄色 C.3-裸压端子-OT-6mm^2-M4-镀锡-圆形预绝缘端子-12~10AWG-黄色 C.3-A.3-单根电缆-直通网线-20m-(网口8位-Ⅳ)-(CC4P0.5PB(S))-(网口8位-Ⅳ)-户D.2-网口连接器-水晶插头-8PIN-8bit-屏蔽-插头-24~26AWG-CAT 6/配25050064对称双绞线缆-100ohm-SFTP CAT5E-0.53mm-24AWG-4对-黑-户外电缆 B.1-组件｜附件-BTS3036A-安装成套件 B.1-工程安装件-DKBA4.070.0964MX-Hert 户外底座-BTS3036A-底座 A.1-工程安装件--400mm线梯-- A.2-导电体-DKBA4.150.0526MX-双孔接地排-BTS3606A A.1-组件｜附件-BTS3036A-配套设备 B.2-总装机柜-APM30-QWFB1BATC-蓄电池柜 D.1-户外机柜机架-DKBA4.100.0945MX-APM30蓄电池柜-APM30-480*600*700 A.2-B.1-微动开关-1A1B-250VAC-10A-螺钉安装-0mm-13*30*34mm-100,000-行程开关单根电缆-27V电源线-0.46m-(OT16-6)-(6UL1015红)-(OT16-6) A.6-单根电缆-27V电源线-0.7m-(OT16-6)-(6UL1015黑)-(OT16-6) A.4-B.3-单根电缆-门磁告警线-5m-(2*平行250型)-(2*22UL1007红)-(2*T0.5^2桔红标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M4*20-镀彩锌A.3-单根电缆-PGND馈电线-0.2m-(OT6-6)-(10UL1015黄绿)-(OT6-6) C.10-C.2-产品标签-DKBA8.812.0012-空白合格证标签-ViewPoint Production-70*46非金属件-DKBA0.480.0457-线扣-GT-100M---100*2.5mm-强度8.1kg B.1-非金属件-DKBA0.480.0457-线扣-GT-150I-150*3.6mm-强度18.2kg B.1-非金属件-DKBA0.480.0457-线扣-GT-300I-300*3.6mm-强度18.2kg B.1-总装机柜-APM30-QWFB2APMC-APM30总装机柜(-48V) F.1-户外机柜机架-DKBA4.100.0947MX-APM30 机架-APM30-600*480*700 A.2-风扇-36V-75V-24.96W/36.96W-4.347m^3/min-92*92*38-450mm-4PIN C.2-普通插头-2pin-单排-5.08mm-配14100203 A.7-制成板-APM-WD41APMI-监控防雷转接板-1*1 F.1AB.1-微动开关-1A1B-250VAC-10A-螺钉安装-0mm-13*30*34mm-100,000-行程开关制成板-BSC6800-QW11WFSI-风扇状态指示板 A.30A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M4*45-镀彩锌非标紧固件-DKBA0.480.0090-面板螺钉-M6x12TM-通用 A.3-C.2-产品标签-DKBA8.812.0012-空白合格证标签-ViewPoint Production-70*46产品标签-DKBA8.807.2155-APM30 传输柜-APM 30-70*46-PET,Silver A.1-监控和告警电缆-监控电缆-0.60m-(D15母)-(CC8P0.48黑(S))-(D15母) A.5-监控和告警电缆-告警电缆-1.0m-(H5(2.5))-(3*22UL1007黑)-(H4(2.5))A.6-单根电缆-PGND馈电线-0.35m-(OT6-5)-(10UL1015黄绿)-(OT6-4) E.4-电源电缆-0.95m-(2*OT2.5-4)-(16UL1015蓝+16UL1015黑)-(D3母-2母) C.3-A.3-非标紧固件-DKBA8.092.0729-绝缘垫圈-内径￠4.0mm,外径￠8.0mm-BTS381A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M4*20-镀彩锌非标紧固件-DKBA0.480.0113-浮动螺母-M6 B.3-单根电缆-PGND馈电线-0.2m-(OT6-6)-(10UL1015黄绿)-(OT6-6) C.10-单根电缆-监控电缆-2.5m-(4*平行250型)-(3*22UL1007黑)-(H2(2.5)) C.3-线缆端子座-4PIN-螺钉压线-24~12AWG-公母成对使用,OEM专用 C.1-制成板-APM-WD41AFMU-透气膜单板-1*1 C.1B非金属件-DKBA0.480.0457-线扣-GT-100M---100*2.5mm-强度8.1kg B.1-非金属件-DKBA0.480.0457-线扣-GT-150I-150*3.6mm-强度18.2kg B.1-非金属件-DKBA0.480.0457-线扣-GT-300I-300*3.6mm-强度18.2kg B.1-配线设备-8E1-MPX286-FL-8系统120欧数字配线单元 B.1-机柜机箱-DKBA4.106.1364-8系统120欧DDF防雷单元-防雷盒-482*240*1U A.1-配线设备-MPX286-4-4系统120欧姆数字配线模块 A.3-配线设备-JPX-DXD1-打线刀 B.1-B.1-蓄电池-阀控式密封铅酸蓄电池(狭长型)-48V-50Ah-电池组-单体390*110*2蓄电池-阀控式密封铅酸蓄电池-48V-12Ah-电池组-单体151*98*100mm B.1-装配组件-iSite MBA-GMUZ1HEAT-MBA加热器插框 C.2-插箱机箱-DKBA4.104.1039MX-加热框- A.20B.3-组件｜附件-iSite BTS3001C-一体化蓄电池箱加热板/220V/300W-320mm*22A.10产品标签-DKBA8.807.0416-加热框标签-MBA一体化工作箱-8.0X30.0-3M781A.1A0产品标签-Q/DKBA8.817.1012-防止过热警告标签-所有产品-16*16-FASSON:B.20单元成套包装材料-DKBA4.170.0708MX-个体单元-MBA 一体化工作箱加热框功能模块-BBU3806-QWF1EMUA1-32路EMUA环境监控模块(-48VDC)H.1-制成板-M900-M1800 BTS3012A -GMO1EMSI -环境监控接口板 -1*1 E.2D成品板-BTS3606E-QCK1EMBA0-环境监控单板 A.3-普通插头-8pin-单排-5.08mm-配14100204 A.7-普通插头-2pin-单排-5.08mm-配14100203 A.7-插箱机箱-DKBA4.104.1469MX-EMU插框- A.2-单根电缆-控制电缆-0.32m-(H8(2.5))-(CC6P0.48黑(S))-(D9母) D.3-B.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*6-镀彩锌DKBA8.807.0205-合格证-部件产品用 A.2-非金属件-DKBA0.480.0457-线扣-GT-100M---100*2.5mm-强度8.1kg B.1-D.3-单根电缆-电源线-0.28m-(H4(3.96))-(18UL1015黑+3*18UL1015红)-(H4(3.C.6-单根电缆-LED告警电缆-0.32m-(H4(2.5))-(2*22UL1007黑+2*22UL1007白)-φ5红2+LEDφ5绿2.5)-E 单根电缆-通信电缆-0.3m-(IDC50牛头)-(扁平排线64)-(IDC50牛头) C.3-单元成套包装材料-DKBA4.170.1805MX-个体单元-BBU3703 模块 A.2-HUAWEI EMUA 用户指南/HUAWEI EMUA User Guide-(V100R001_04) D.1-标志-DKBA8.817.6580--48V-32Port-EMU-70*46-PET A.1-总装机柜-HERT MPE-WD2B5BATC-HBBC总装机柜B E.1-户外机柜机架-DKBA4.100.1022-HBBC蓄电池柜(SUS)-HAPM-480X600X700A.1-门磁开关-常开-隐蔽安装型 C.1-A.9-空气开关-磁断路器-80VDC-100A-1极-2000A-Medium Delay-19*47*63-常开线束-HERT MPE-蓄电池柜电缆线束 B.1-电源电缆-0.25m-6mm^2-黄绿-(OT6-6)-(H07Z-K-6^2黄绿)-(OT6-6)-LSZH A.3-标准紧固件-十字槽盘头螺钉-GB818-85-M3*8-不锈钢- B.3-总装机柜-HERT MPE-WD2B6TMC-HTMC总装机柜B D.1-户外机柜机架-DKBA4.100.1021-HAPM-AL cabinet-HAPM-480X600X700 A.1-风扇-36V-75V-24.96W/36.96W-4.347m^3/min-92*92*38-450mm-4PIN C.2-制成板-APM-WD41AFMU-透气膜单板-1*1 C.1B制成板-APM-WD41APMI-监控防雷转接板-1*1 F.1A制成板-HERT MPE-WD22TSIB-温度传感器板-4*4 A.5A门磁开关-常开-隐蔽安装型 C.1-普通插头-2pin-单排-5.08mm-配14100203 A.7-制成板-BTS3012AE-GM51DFIU-风扇接口板-2*2 B.1A内部成套电缆-HERT MPE-传输柜内部成套电缆 D.1-非标紧固件-十字槽沉头自攻螺钉-ST4.8x12-螺钉头部Φ6.2-镀彩锌 A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*6-镀彩锌B.3-标准紧固件-十字槽盘头螺钉-GB818-85-M3*8-镀彩锌 A.3-配电盒-BTS3036-GMKE3DCDUA-直流配电单元 B.1-盒式模块-DKBA4.106.1639MX-直流配电盒-03-442mm*42mm*200mm-配电框A.1-线束-DBS3036-直流配电箱电缆线束 B.1-A.3-标准紧固件-十字槽盘头螺钉,弹垫,平垫组合件-GB9074.4-88-M3*8-镀彩锌标准紧固件-十字槽盘头螺钉-GB818-85-M3*8-镀彩锌 A.3-产品标签-DKBA8.817.8429-Label-DCDU-03A-25*4mm-PC T0.25mm A.1-B.1-产品标签-DKBA8.817.1003-产品防拆警告标签(1PCS含标签1张)-50mm*12mm产品标签-DKBA8.812.0012-空白合格证标签-ViewPoint Production-70*46C.2-A.2-产品标签-DKBA8.817.1759-Product Blank Nameplate-ViewPoint Product制成板-HERT MPE -WD22DLPB-直流电源防雷板 A.17BA.5-断路器-磁断路器-80VDC-12A-1-600A-C-19*39*48-无辅助开关-面板卡装-摇A.6-断路器-磁断路器-80VDC-4A-1-600A-C-19*39*48-无-面板卡装-摇键式-防误线缆端子座-2pin-配14120129-2pin单排间距5.08mm B.1-普通插头-2pin-单排-5.08mm-配14100203 A.7-非金属件-DKBA0.480.0457-线扣-GT-100M---100*2.5mm-强度8.1kg B.1-裸压端子-OT-6mm^2-M4-镀锡-圆形预绝缘端子-12~10AWG-黄色 C.3-线缆端子座-4PIN-螺钉压线-24~12AWG-公母成对使用,OEM专用 C.1-组件｜附件-ONUF01D-薄膜加热板(AC 220V,100W)-蓄电池箱/舱适用 A.9-B.40单根电缆-负48V馈电线-2m-(H2(3.96))-(18UL1015蓝+18UL1015黑)-(2*OT1普通插头-2PIN-单排-3.96mm-14110033 B.3-普通端子-母-18/24AWG-2.79mm-0.0109m B.2-裸压端子-OT-1.5mm^2-M4-镀锡-圆形预绝缘端子-22~16AWG-红色 C.3-电子电力线缆-600V-UL1015-0mm^2-18AWG-蓝-0A A.2-电子电力线缆-600V-UL1015-0mm^2-18AWG-黑-0A A.2-A.4-单根电缆-PGND馈电线-0.38m-(OT2.5-5)-(14UL3386黄绿)-(OT2.5-4)-LSZH裸压端子-OT-2.5mm^2-M5-镀锡-圆形预绝缘端子-16~14AWG-蓝色 C.3-裸压端子-OT-2.5mm^2-M4-镀锡-圆形预绝缘端子-16~14AWG-蓝色 C.3-电子电力线缆-600V-UL3386-2mm^2-14AWG-黄/绿-27A-低烟无卤阻燃电缆A.1-绝缘材料-塑料胀管-φ6*26 C.2-烟雾传感器-24V-两线制-光电感烟型 -天花板外露式-中文资料- C.1-液位传感器-18*77mm(直径*长度)-电缆线长度为2700mm/中文资料H.2-门磁开关-常开-隐蔽安装型 C.1-D.1-温湿度传感器-15V~24VDC--20~80degC/0~100%RH-±0.8degC/±5%RH(15~50D.1-对称双绞线缆-120ohm-SEYVP-120-0.4mm-26AWG-2对-Pantone 430U-OEM专用产品成套包装材料-BTS3036A C.1-B.1-单元成套包装材料-DKBA4.170.2184MX-个体单元-HERT MPE 室外宏堆叠机柜A.2-木质包装材料-DKBA4.171.0576-木箱-HERT MPE 室外宏堆叠机柜-1500*690缓冲衬垫-DKBA8.846.0973-泡沫衬垫-BTS312机柜 A.3-缓冲衬垫-DKBA8.846.0974-泡沫衬垫-BTS312机柜 A.3-胶袋-DKBA8.840.0099-防潮袋-所有产品-650*550*1700-立体袋 C.2-干燥剂-DKBA 0.420.0040-蒙脱石干燥剂-16Unit B.20。
TDSBELDEN7860ENHCAT6FUTPLSNHv4
7860ENHNetworking CablesDatatwist® cableCAT 6 bonded F/UTP LSNH2013-03-20 v4Applications• Horizontal and building backbone cable• Support current and future Category 6 and 5e applications, such as:1000Base-T (Gigabit Ethernet), 100 Base-T, 10 Base-T, FDDI, ATMGeneral standards• International standard: ISO/IEC 11801 2nd edition (2002) and ISO/IEC 11801 Amendment 2 (2010) • European standard: EN 50173-1 (2002) and EN 50173-1 Amendment 1 (2009)• U.S. Standards: ANSI/TIA/EIA 568-B.2-1 (2002)Construction & Dimensions1. ConductorMaterial Solid bare copper ETPDiameter AWG 232. InsulationMaterial PolyethyleneNominal diameter over insulation 1.35 mm3. Cable corePair 2 twisted bonded insulated conductorsCross Web PolyolefinNumber of pairs 4, all twisted togetherColour code pair 1 White / Blue & BlueColour code pair 2 White / Orange & OrangeColour code pair 3 White / Green & GreenColour code pair 4 White / Brown & BrownFoil Overlapping polyester foil over cable core4. Foil shieldingMaterial Laminated Aluminium / PolyesterPosition aluminium Facing outside, in contact with drain wireDrain wire material Solid tinned copperDrain wire diameter AWG 265. JacketMaterial LSNHDiameter 7.3 ± 0.3 mmElectrical characteristicsReference standard: ISO/IEC 61156-5 edition 2.0 (2009)Low frequency and D.C. (at 20°C) Specification Unit D.C. resistance conductor < 9.5 Ω/100m Resistance unbalance: within a pair / between pairs < 2 / < 4 % Insulation resistance ≥ 5000 MΩ.km Dielectric strength conductor-conductor and conductor-screen (2 sec.) 2.5 kV DC Mutual capacitance < 56 nF/km Capacitance unbalance pair to ground < 1600 pF/km Nominal velocity of propagation (for information only) > 0.6 cDelay skew (differential delay) ≤ 40 ns/100m Transfer impedance according IEC 61156-5 Grade 2Coupling attenuation according IEC 61156-5 Type IIHigh frequency (at 20°), reference standard: ISO/IEC61156-5TYPE 1* 4 10 16 20 31.2 62.5 100 155 200 250 MHz Attenuation 2.1 3.8 6.0 7.6 8.5 10.7 15.5 19.9 25.3 29.1 33.0 dB/100m NEXT 75.3 66.3 60.3 57.2 55.8 52.9 48.4 45.3 42.4 40.8 39.3 dB/100m PS NEXT 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 39.4 37.8 36.3 dB/100m ACR 73.2 62.4 54.3 49.6 47.3 42.1 32.9 25.4 17.1 11.6 6.3 dB/100m PS ACR 70.2 59.4 51.3 46.6 44.3 39.1 29.9 22.4 14.1 8.6 3.3 dB/100m ACR-F 70.0 58.0 50.0 45.9 44.0 40.1 34.1 30.0 26.2 24.0 22.0 dB/100m PS ACR-F 67.0 55.0 47.0 42.9 41.0 37.1 31.1 27.0 23.2 21.0 19.0 dB/100m Return Loss 20.0 23.0 25.0 25.0 25.0 23.6 21.5 20.1 18.8 18.0 17.3 dB/100m TCL level 1 40.0 34.0 30.0 28.0 27.0 25.1 22.0 20.0 18.1 17.0 16.0 dB/100m EL TCTL 35.0 23.0 15.0 10.9 9.0 5.1 dB/100mImpedance122.2 115.2 111.9 111.9 111.9 114.1 118.3 121.9 126.0 128.8 131.5 Ωupper limitImpedance81.8 86.8 89.4 89.4 89.4 87.7 84.5 82.0 79.3 77.6 76.0 Ωlower limitPropagation570 552 545 543 540 539 538 537 537 537 536 dB/100m delayNOTE: Limits below 4MHz are for information onlyMechanical characteristics SpecificationUnit Elongation at break of the conductors 8 % Minimum elongation at break of the insulation ≥ 100 % Minimum elongation at break of the sheath ≥ 100 % Tensile strength of sheath > 9 MPa Environmental and overall characteristicsBelden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product.Specification Unit Maximum operating voltage (for all temperatures cable is intended to be used) 72 V D.C. Maximum continuous current per conductor (@25°C) 1.5 A Temperature rating installation 0 / 50 °C Temperature rating operation - 30 / 60 °C Total cable weight 50 kg/km Minimum bending radius (during operation and installation) 29 / 58 mm Maximum pulling strength 80 N Burning load 745 kJ/m Smoke density acc. to IEC 61034-1/2 & EN50268-1/2; transmittance > 60 % Amount of halogen acid gas acc. to IEC 60754-1/2 & EN50267-1/2; pH > 4.3Amount of halogen acid gas acc. to IEC 60754-1/2 & EN50267-1/2; Conductivity < 10 µS/mm Fire performance according IEC 60332-1 Pass。
WM8995__Natertech
wDigital Audio Hub CODECDESCRIPTIONThe WM8995 is a digital audio hub CODEC designed for smartphones. The device integrates two-wire SPDM interfaces for up to six digital microphones and four digital speaker amplifiers. All data, clocking and control of these remote transducers is managed using the SPDM interfaces. Four DAC channels and four ground-referenced class W output drivers provide interfaces to a headset connector, earpiece or line output. Ground loop feedback is employed to reduce common mode noise on these outputs. A low power accessory interface provides plug-in and removal detection and hookswitch button press detection in standby mode. Load impedance sensing circuits provide support for a wide range of 3.5mm accessory types. High PSRR, a fully differential internal architecture and on-chip RF noise filters ensure a very high degree of noise immunity. Stereo full duplex asynchronous sample rate converters are integrated to support digital mixing and loopback across asynchronous clock domains. The WM8995 is supplied in a very small and thin W-CSP package, ideal for portable systems.AVDD1 AVDD2 LDO1ENAWM8995FEATURES• • • • • 4-channel DAC with 100dB SNR (‘A’ weighted) 6-channel SPDM digital MIC interface 4-channel SPDM digital speaker interface Class W ground-referenced headphone/line outputs Headset connector interface Advanced accessory detect function Headphone common mode feedback Multi-channel digital audio interfaces - All standard data formats and 4-channel TDM supported - All standard sample rates from 8kHz to 96kHz - 192kHz ultrasonic MIC output mode - Sample rate conversion, digital mixing and loopback Low power dual FLL - Provides all necessary internal clocks - 32kHz to 27MHz input frequency with exact 8kHz support Dual control interface - Standard 2-wire control interface - Interrupts to DSP and application processor 69-ball W-CSP package (3.67 x 3.57 x 0.7mm, 0.4mm pitch)•• • •APPLICATIONS• Smartphones and music phonesDBVDD2 DBVDD3 DCVDD DGND DBVDD1DMICCLK1 DMICDAT1 DMICCLK2 DMICDAT2 DMICCLK3 DMICDAT36-CHANNEL DIGITAL MIC INTERFACEDAC L1HPOUT1L HPOUT1FBDAC R1HPOUT1RIN1LN IN1LP PGAs IN1RN IN1RPADC L DIGITAL MIXING COREDAC L2HPOUT2L HPOUT2FBADC RDAC R2HPOUT2RMICDET HPDETL HPDETR ACCDETCOM ACCESSORY INTERFACE MICVDD MICBIAS1 DIGITAL AUDIO ENHANCEMENTS 1 DIGITAL AUDIO ENHANCEMENTS 2 ASYNCHRONOUS SAMPLE RATE CONVERSION4-CHANNEL DIGITAL SPEAKER AMPLIFIER INTERFACESPKCLK1 SPKDAT1 SPKCLK2 SPKDAT2 GPIO14 GPIO2MICBIAS2FLL2 MIXERS AND MULTIPLEXERS REFERENCE GENERATOR AUDIO INTERFACE 1 AUDIO INTERFACE 2 AUDIO INTERFACE 3 CONTROL INTERFACE1 CONTROL INTERFACE2 CHARGE PUMP CPCA CPCB CPVOUTP CPVOUTNFLL1WOLFSON MICROELECTRONICS plcTo receive regular email updates, sign up at /enewsAGNDVREFCCPGNDCPVDDMCLK2 MCLK1ADCLRCLK1/GPIO1 ADCDAT1 DACDAT1 DACLRCLK1 BCLK1ADCDAT2 GPIO6/ADCLRCLK2 DACDAT2 DACLRCLK2 BCLK2GPIO11/BCLK3 GPIO10/LRCLK3 GPIO8/DACDAT3 GPIO9/ADCDAT3CIFMODE CS/ADDR SDA1 SCLK1Product Brief, February 2010, Rev 1.8Copyright ©2010 Wolfson Microelectronics plcSDA2 SCLK2WM8995 BLOCK DIAGRAMProduct PreviewwProduct Brief, February 2010, Rev 1.8 2Product PreviewWM8995PIN CONFIGURATIONORDERING INFORMATIONORDER CODE WM8995ECSN/R Note: Reel quantity = 3500 TEMPERATURE RANGE -40°C to +85°C PACKAGE 69-ball W-CSP (Pb-free, Tape and reel) MOISTURE SENSITIVITY LEVEL MSL1 PEAK SOLDERING TEMPERATURE 260°CwProduct Brief, February 2010, Rev 1.8 3WM8995 PIN DESCRIPTIONPIN NO A1 A2 A3 A4 A5 A6 A7 A8 A9 B1 B2 B3 B4 B5 B6 B7 B8 B9 C1 C2 C3 C4 C5 C6 C7 C8 C9 D1 D2 D3 D7 D8 D9 E1 E2 E3 E7 E8 E9 F1 F2 F3 F8 F9 NAME GPIO9/ ADCDAT3 DBVDD3 DMICDAT2 DMICCLK3 DMICCLK1 DNC MICBIAS2 IN1LP IN1RP SPKCLK1 GPIO11/ BCLK3 DMICDAT3 DMICCLK2 MICBIAS1 DNC MICDET IN1LN AGND GPIO14 SPKDAT1 DMICDAT1 MICVDD VREFC AVDD1 IN1RN AVDD2 HPDETR SPKCLK2 SPKDAT2 GPIO10/ LRCLK3 ACCDETCOM HPDETL HPOUT1FB BCLK1 DACLRCLK1 GPIO8/ DACDAT3 HPOUT1R HPOUT1L HPOUT2R MCLK2 GPIO2 MCLK1 HPOUT2FB HPOUT2L Analogue Input Analogue Input Supply Digital Input / Output Digital Output Digital Input Supply / Analogue Output Analogue Output Supply Analogue Input Supply Analogue Input / Output Digital Output Digital Output Digital Input / Output Analogue Input / Output Analogue Input / Output Analogue Input Digital Input / Output Digital Input / Output Digital Input / Output Analogue Output Analogue Output Analogue Output Digital Input Digital Input / Output Digital Input Analogue Input Analogue Output Analogue Output Analogue Input Analogue Input Digital Output Digital Input / Output Digital Input Digital Output Analogue Output TYPE Digital Input / Output Supply Digital Input Digital Output Digital Output DESCRIPTION General Purpose pin GPIO 9 / Audio interface 3 ADC digital audio data Digital buffer (I/O) supply (for Audio Interface 3) Digital Microphone data input 2 Digital Microphone clock output 3 Digital Microphone clock output 3 Do not connectProduct PreviewMicrophone bias 2 (for microphone / accessory detection circuit) Left channel non-inverting single-ended input / Left channel positive differential input Right channel non-inverting single-ended input / Right channel positive differential input Digital Speaker (PDM) clock output 1 General Purpose pin GPIO 11 / Audio interface 3 bit clock Digital Microphone data input 3 Digital Microphone clock output 2 Microphone bias 1 (digital microphone supply) Do not connect Microphone / accessory detect sense input Left channel inverting single-ended input / Left channel negative differential input Analogue ground (Return path for AVDD1, AVDD2, MICVDD) General Purpose pin GPIO 14 Digital Speaker (PDM) data output 1 Digital Microphone data input 2 Microphone supply / LDO2 output Bandgap reference decoupling capacitor LDO2 input Right channel inverting single-ended input / Right channel negative differential input Analogue core supply Headphone Right sense input Digital Speaker (PDM) clock output 2 Digital Speaker (PDM) data output 2 General Purpose pin GPIO 10 / Audio interface 3 left / right clock Headphone detect ground (Return path for HPDETL / HPDETR) Headphone Left sense input HPOUT1L and HPOUT1R ground loop noise rejection feedback Audio interface 1 bit clock Audio interface 1 DAC left / right clock (can also be used for ADC clock) General Purpose pin GPIO 8 / Audio interface 3 DAC digital audio data Right headphone 1 output Left headphone 1 output Right headphone 2 output Master clock 2 General Purpose pin GPIO 2 Master clock 1 HPOUT2L and HPOUT2R ground loop noise rejection feedback Left headphone 2 output Product Brief, February 2010, Rev 1.8 4wProduct Preview PIN NO G1 G2 G3 G4 G5 G8 G9 H1 H2 H3 H4 H5 H6 H7 H8 H9 J1 J2 J3 J4 J5 J6 J7 J8 J9 NAME CIFMODE SCLK1 CS/ADDR ¯¯ SDA2 LDO1ENA CPVOUTP CPVOUTN SDA1 DCVDD DGND ADCDAT1 ADCDAT2 DACDAT2 BCLK2 CPCA CPCB SCLK2 DBVDD1 DACDAT1 ADCLRCLK1/ GPIO1 GPIO6/ ADCLRCLK2 DACLRCLK2 DBVDD2 CPVDD CPGND TYPE Digital Input Digital Input Digital Input Digital Input / Output Digital Input Analogue Output Analogue Output Digital Input / Output Supply / Analogue Output Supply Digital Output Digital Output Digital Input Digital Input / Output Analogue Output Analogue Output Digital Input Supply Digital Input Digital Input / Output Digital Input / Output Digital Input / Output Supply Supply Supply Control interface 1 clock input DESCRIPTION Control interface 1 mode selectWM8995Control interface 1 3-/4-wire (SPI) chip select or 2-wire (I2C) address select Control interface 2 data input / acknowledge output Enable pin for LDO1 Charge pump positive supply decoupling pin (HPOUT1 / HPOUT2) Charge pump negative supply decoupling pin (HPOUT1 / HPOUT2) Control interface 1 data input / 2-wire acknowledge output Digital core supply / LDO1 output Digital ground (Return path for DCVDD, DBVDD1, DBVDD2, DBVDD3) Audio interface 1 ADC digital audio data Audio interface 2 ADC digital audio data Audio interface 2 DAC digital audio data Audio interface 2 bit clock Charge pump fly-back capacitor pin Charge pump fly-back capacitor pin Control interface 2 clock input Digital buffer (I/O) supply (core functions and Audio Interface 1) / LDO1 input Audio interface 1 DAC digital audio data Audio interface 1 ADC left / right clock / General Purpose pin GPIO 1 General Purpose pin GPIO 6 / Audio interface 2 ADC left / right clock Audio interface 2 DAC left / right clock (can also be used for ADC clock) Digital buffer (I/O) supply (for Audio Interface 2) Charge pump supply Charge pump ground (Return path for CPVDD)wProduct Brief, February 2010, Rev 1.8 5WM8995 ABSOLUTE MAXIMUM RATINGSProduct PreviewAbsolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical Characteristics at the test conditions specified. ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage of this device. Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage conditions prior to surface mount assembly. These levels are: MSL1 = unlimited floor life at <30°C / 85% Relative Humidity. Not normally stored in moisture barrier bag. MSL2 = out of bag storage for 1 year at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag. MSL3 = out of bag storage for 168 hours at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag. The Moisture Sensitivity Level for each package type is specified in Ordering Information. CONDITION Supply voltages (AVDD1, MICVDD, DBVDD2, DBVDD3) Supply voltages (AVDD2, DCVDD, DBVDD1) Supply voltages (CPVDD) Voltage range digital inputs (DBVDD1 domain) Voltage range digital inputs (DBVDD2 domain) Voltage range digital inputs (DBVDD3 domain) Voltage range analogue inputs Operating temperature range, TA Junction temperature, TJ Storage temperature after soldering MIN -0.3V -0.3V -0.3V DGND -0.3V DGND -0.3V DGND -0.3V AGND -0.3V -40ºC -40ºC -65ºC MAX +4.5V +2.5V +2.2V DBVDD1 +0.3V DBVDD2 +0.3V DBVDD3 +0.3V AVDD2 +0.3V +85ºC +150ºC +150ºCRECOMMENDED OPERATING CONDITIONSPARAMETER Digital supply range (Core) Digital supply range (I/O) Digital supply range (I/O) Analogue supply 1 range Analogue supply 2 range Charge Pump supply range Microphone Bias supply Ground Notes 1. All digital and analogue grounds must always be within 0.3V of each other. SYMBOL DCVDD DBVDD1 DBVDD2, DBVDD3 AVDD1 AVDD2 CPVDD MICVDD DGND, AGND, CPGND MIN 0.95 1.62 1.62 1.71 1.71 1.71 1.71 TYP 1.0 1.8 1.8 3.0 1.8 1.8 2.5 0 MAX 2.0 2.0 3.6 3.6 2.0 2.0 3.6 UNIT V V V V V V V VwProduct Brief, February 2010, Rev 1.8 6Product PreviewWM8995PACKAGE DIMENSIONSB: 69 BALL W-CSP PACKAGE 3.670 X 3.570 X 0.7mm BODY, 0.40 mm BALL PITCH DM076.A6 2 A A2 A B C e D E F G H I 2X e 0.10 Z 0.10 Z f1 SOLDER BALL 5 E1 9 8 7 6 5 4 3 2 1 DDETAIL 1A1 CORNER 4EDETAIL 2D12XTOP VIEWBOTTOM VIEWf2h 1 Z A1DETAIL 2Symbols A A1 A2 D D1 E E1 e f1 f2 h MIN 0.645 0.170 0.465 3.630 3.530Dimensions (mm) NOM MAX 0.755 0.700 0.235 0.210 0.490 0.525 3.670 3.710 3.200 3.610 3.570 3.200 0.400NOTE50.215 0.165 0.221 0.258 0.295NOTES: 1. PRIMARY DATUM -Z- AND SEATING PLANE ARE DEFINED BY THE SPHERICAL CROWNS OF THE SOLDER BALLS. 2. THIS DIMENSION INCLUDES STAND-OFF HEIGHT ‘A1’ AND BACKSIDE COATING. 3. A1 CORNER IS IDENTIFIED BY INK/LASER MARK ON TOP PACKAGE. 4. BILATERAL TOLERANCE ZONE IS APPLIED TO EACH SIDE OF THE PACKAGE BODY. 5. ‘e’ REPRESENTS THE BASIC SOLDER BALL GRID PITCH. 6. THIS DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE. 7. FOLLOWS JEDEC DESIGN GUIDE MO-211-C.wProduct Brief, February 2010, Rev 1.8 7WM8995 IMPORTANT NOTICEProduct PreviewWolfson Microelectronics plc (“Wolfson”) products and services are sold subject to Wolfson’s terms and conditions of sale, delivery and payment supplied at the time of order acknowledgement.Wolfson warrants performance of its products to the specifications in effect at the date of shipment. Wolfson reserves the right to make changes to its products and specifications or to discontinue any product or service without notice. Customers should therefore obtain the latest version of relevant information from Wolfson to verify that the information is current.Testing and other quality control techniques are utilised to the extent Wolfson deems necessary to support its warranty. Specific testing of all parameters of each device is not necessarily performed unless required by law or regulation.In order to minimise risks associated with customer applications, the customer must use adequate design and operating safeguards to minimise inherent or procedural hazards. Wolfson is not liable for applications assistance or customer product design. The customer is solely responsible for its selection and use of Wolfson products. Wolfson is not liable for such selection or use nor for use of any circuitry other than circuitry entirely embodied in a Wolfson product.Wolfson’s products are not intended for use in life support systems, appliances, nuclear systems or systems where malfunction can reasonably be expected to result in personal injury, death or severe property or environmental damage. Any use of products by the customer for such purposes is at the customer’s own risk.Wolfson does not grant any licence (express or implied) under any patent right, copyright, mask work right or other intellectual property right of Wolfson covering or relating to any combination, machine, or process in which its products or services might be or are used. Any provision or publication of any third party’s products or services does not constitute Wolfson’s approval, licence, warranty or endorsement thereof. Any third party trade marks contained in this document belong to the respective third party owner.Reproduction of information from Wolfson datasheets is permissible only if reproduction is without alteration and is accompanied by all associated copyright, proprietary and other notices (including this notice) and conditions. Wolfson is not liable for any unauthorised alteration of such information or for any reliance placed thereon.Any representations made, warranties given, and/or liabilities accepted by any person which differ from those contained in this datasheet or in Wolfson’s standard terms and conditions of sale, delivery and payment are made, given and/or accepted at that person’s own risk. Wolfson is not liable for any such representations, warranties or liabilities or for any reliance placed thereon by any person.ADDRESS:Wolfson Microelectronics plc 26 Westfield Road Edinburgh EH11 2QB United KingdomTel :: +44 (0)131 272 7000 Fax :: +44 (0)131 272 7001 Email :: sales@wProduct Brief, February 2010, Rev 1.8 8。
2N6668;中文规格书,Datasheet资料
2N6668SILICON PNP POWER DARLINGTON TRANSISTORsSTMicroelectronics PREFERRED SALESTYPEs PNP DARLINGTONsINTEGRATED ANTIPARALLEL COLLECTOR-EMITTER DIODEAPPLICATIONS: s GENERAL PURPOSE SWITCHINGs GENERAL PURPOSE SWITCHING AND AMPLIFIERDecember 2000ABSOLUTE MAXIMUM RATINGS®1/4s Pr od u c t () -l s lOb so e t ePr od u c t () -O bs o e t eP THERMAL DATAELECTRICAL CHARACTERISTICS (T case = 25 oC unless otherwise specified)For PNP type voltage and current values are negative.2N66682N6668l s l c )Ob so e t ePr od u c t () -O bs o e t eP r od u t (sInformation furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.The ST logo is a trademark of STMicroelectronics© 2000 STMicroelectronics – Printed in Italy – All Rights ReservedSTMicroelectronics GROUP OF COMPANIESAustralia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.2N6668分销商库存信息: STM2N6668。
手机解锁密码大全
手机解锁密码大全三、GSM手机密笈&e r.b]'a D:V（一）摩托罗拉摩托罗拉所有机锁：按MENU+5+1/2 2f} o U%AT190解锁密码： 20010903T191解锁密码：199807223X8/2X88/998/8088/L2000/7689/T189/C289等初始密码为1234 ；话机密码为000000 ；解锁方法：如无测试卡，则先输入1234，如密码已更改，先按Menu键会出现“修改开锁密码”，按OK键，然后输入000000就会显示四位数的话机密码，如保密码已更改，则只能用测试卡或软件工具解。
2C&r/_F3@X!JT2688/2988万能解锁码：19980722C300解话机锁：20020801摩托罗拉手机出现“话机坏，请送修”：可利用测试卡，输入0205#、0205068#即可修复，无须重写码片。
T2688/2988/988d设置中文：*#0000# ok（插卡）V60/V66/V70解锁：插入测试卡，开机后输入menu+048263*进入测试状态后按18*1总清除，输入18*0是主复位。
V998外文改中文：MENU—左方向键按3下—OK—左方向键按5下—OK—Simplified—CHINESE摩托罗拉2688时间不走修复密诀：将电源1脚和8脚用漆包线短接，必杀！（二）诺基亚初始保密码：12345 W"w2K z k#i)A n5110锁码机解码：在保密码锁死，输入正确保密码无效的情况下，可1、按C键不放，2、按*键不放，3、按*键不放，4、输入04*PIN*PIN*PIN# 解除锁码。
;z8N M4s y!q3210解 SP 锁： 1、按C键 2、按向下键 3、按C键直到屏幕清除 4、按住*键直到其闪烁 5、再按住*键直到其闪烁，输入04*PIN码*PIN 码*PIN 6~,O Y)^/W"K vTN7650恢复出厂设置：*#7370#诺基亚手机省30%电密码：*#746025625# |(H3K诺基亚手机查出厂日期：*#0000#诺基亚能打过进不能呼出：如果显示屏左上角有“2”字，按住#键两秒，再按确认即可；如果没有显示“2”，则按“功能键”+6+1+4+2再按确认即可。
1732 ArmorBlock 诊断16点I O模块系列A用户指南说明书
Wiring Diagrams Pinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series ACatalog Numbers 1732D-8X81212D, -8X81212HD,-8I8O1212D, -IB161212D, -IBDPM12MND, -8X8M12D Package ContentsYour package contains one 1732 ArmorBlock module and these wiring instructions.For complete installation instructions, refer to the Module Publication Number table and visit .Module Publication NumberModule PublicationNumber1732D-IN009 DeviceNet 1732 ArmorBlock Network-powered 8-input Auxiliary-powered8-output Module, Series A (cat. no. 1732-8X81212D)1732D-IN010 DeviceNet 1732 ArmorBlock Network-powered 8-input/8-output Module,Series A (cat. no. 1732-8I8O1212D)1732D-IN011 DeviceNet 1732 ArmorBlock Network-powered 8-input Auxiliary-powered8-output Module, Series A (cat. no. 1732-8X81212DH)1732D-IN012 DeviceNet 1732 ArmorBlock Network-powered 16-input Module, Series A(cat. no. 1732-IB161212D)1732D-IN007 DeviceNet 1732 ArmorBlock Network Powered 16-Input Module, Series A(cat. no. 1732D-IBDPM12MND)1732D-IN004 DeviceNet 1732 ArmorBlock Network-powered 8-input Auxiliary-powered8-output Module, Series A (cat. no. 1732D-8X8M12D)Publication 1732-WD003C-EN-P - July 20092 Pinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series A Publication 1732-WD003C-EN-P - July 2009DeviceNet ConnectorsI/O Connectors1732 DeviceNet Micro-style(view into connector)Pin 1DrainPin 2V+Pin 3 V-Pin 4CAN_HPin 5CAN_L (view into connector)Pin 1DrainPin 2V+Pin 3V-Pin 4CAN_HPin 5CAN_LNetwork-in Male Connector Network-out Female Connector1732 DeviceNet Mini-styleNetwork-in Male Connector(view into connector)Pin 1 Sensor Source VoltagePin 2 Input BPin 3 ReturnPin 4 Input APin 5 PE 5-pin Female Input Micro-stylePinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series A 3Publication 1732-WD003C-EN-P - July 2009Auxiliary Power Connector ATTENTION Two sets of mounting holes are used to mount the module directly to a panel or machine. Mounting holes accommodate #6 (M3) pan head screws. The torquespecification is 0.64 Nm (6 in-lb).ATTENTION This equipment is considered Group 1, Class A industrial equipment accordingto IEC/CISPR Publication 11. Without appropriate precautions, there may bepotential difficulties ensuring electromagnetic compatibility in otherenvironments due to conducted as well as radiated disturbance.(view into connector)Pin 1 Not UsedPin 2 Output BPin 3 ReturnPin 4 Output APin 5 PE5-pin Female Output Micro-style(view into connector)Pin 1Sensor Source VoltagePin 2 OutputPin 3 ReturnPin 4 InputPin 5 PE5-pin Female Combination Micro-style(view into connector)Pin 1Output Power+Pin 2No ConnectionPin 3No ConnectionPin 4Output Power-4-pin Mini-style4 Pinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series A Publication 1732-WD003C-EN-P - July 2009SpecificationsEnvironmental Specifications AttributeValue Temperature, operating-20…60 °C (-4…140 °F)Ambient temperaturerating (UL)60 °C (140 °F)Operating voltage11…30V DC Output current 1732D-8I8O1212D - 0.5A per output1732D-8X81212D - 0.5A per output1732D-8X81212HD - 1.4A per output1732D-8X8M12D - 0.5A per outputEnclosure type ratingMeets IP65/66/67/69K (when marked), and NEMA 4X/6P withreceptacle dust caps or cable termination.CertificationsCertifications (whenproduct is marked)(1)(1)See the Product Certification link at for Declarations of Conformity, Certificates, and other certification details.Value c-UL-usUL Listed Industrial Control Equipment, certified for US and Canada. See UL File E322657CE European Union 2004/108/EC EMC Directive, compliant with:EN 61326-1; Meas./Control/Lab., Industrial RequirementsEN 61000-6-2; Industrial ImmunityEN 61000-6-4; Industrial EmissionsEN 61131-2; Programmable Controllers (Clause 8, Zone A & B)C-Tick Australian Radiocommunications Act,compliant with: AS/NZS CISPR 11; Industrial EmissionsDeviceNetODVA conformance tested to DeviceNet specificationsPinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series A 5 Notes:Publication 1732-WD003C-EN-P - July 20096 Pinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series A Notes:Publication 1732-WD003C-EN-P - July 2009Pinout Guide for 1732 ArmorBlock Diagnostic 16-point I/O Modules, Series A 7 Notes:Publication 1732-WD003C-EN-P - July 2009Publication 1732-WD003C-EN-P - July 2009PN-51088Supersedes Publication 1732-WD003B-EN-P - January 2008Copyright © 2009 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.Rockwell Automation SupportRockwell Automation provides technical information on the Web to assist you in using its products. At , you can find technicalmanuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.For an additional level of technical phone support for installation, configuration and troubleshooting, we offer TechConnect Support programs. For more information, contact your local distributor or Rockwell Automation representative, or visit .Installation AssistanceIf you experience a problem with a hardware module within the first 24 hours ofinstallation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your module up and running:New Product Satisfaction ReturnRockwell tests all of its products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned:Allen-Bradley, Rockwell Automation, TechConnect, and ArmorBlock are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.United States1.440.646.3434 Monday – Friday, 8am – 5pm EST Outside United States Please contact your local Rockwell Automation representative for any technical support issues.United States Contact your distributor. You must provide a Customer Support case number (see phone number above to obtain one) to your distributor in order to complete the return process.Outside United StatesPlease contact your local Rockwell Automation representative for returnprocedure.。
各国各运营商MCC,MNC号
[edit]Angola - AO[edit]Barbados - BB[edit]Republic of the Congo - CG[edit]Egypt - EG[edit]Israel - ILThis section does not cite any references or sources. Please help improve this section by adding citationsto reliable sources. Unsourced material may be challenged and removed. (August 2010)MCC MNC Brand Operator Status Bands (MHz) References and notes 401 01 Beeline KaR-Tel LLP Operational GSM 900 / GSM 1800401 02 Kcell GSM Kazakhstan Ltd Operational GSM 900 / GSM 1800401 07 Dalacom Operational CDMA2000 800401 08 Kazakhtelecom Operational CDMA2000 800 / CDMA2000 450401 77 MobileTelecomServiceMobile Telecom ServiceLLPOperational GSM 900[edit]Kenya - KEMCC MNC Brand Operator Status Bands (MHz) References and notes 639 02 Safaricom Safaricom Limited Operational GSM 900 / GSM 1800 [64]639 03 Airtel Bharti Airtel Operational GSM 900 [24]639 07 OrangeKenyaTelkom Kenya OperationalCDMA2000 / GSM 900 / GSM1800639 05 yu Econet Wireless Kenya Operational GSM 900 / GSM 1800 [64][edit]Kiribati - KIMCC MNC Brand Operator Status Bands (MHz) References and notes545 09 KiribatiFrigateTelecom Services KiribatiLtdOperational GSM 900[edit]North Korea - KPMCC MNC Brand Operator Status Bands (MHz) References and notes467 192 Koryolink Cheo Technology JvCompanyOperational UMTS 2100467 193 SunNet Korea Posts andTelecommunicationsCorporationOperational GSM 900[65] UMTS 2100 ispending[edit]South Korea - KRMCC MNC Brand Operator Status Bands (MHz) References and notes450 02 KT KT Operational CDMA2000 1700 Formerly Hansol PCS, Merged with KT450 03 Power 017 Shinsegi Telecom, Inc. NotoperationalCDMA2000 800Merged with SKTelecom in 2002450 04 KT KT Operational CDMA2000 1700 HSM 450 05 SKT SK Telecom Operational CDMA2000 800 / UMTS 2100 [66] 450 06 LGT LG Telecom Operational CDMA2000 1700450 08 olleh KT Operational UMTS 2100[edit]Moldova - MD[edit]Morocco - MA。
ELT-400电磁场曝光级别测量器说明书
Safety Evaluation Within a Magnetic Field EnvironmentDirect evaluation of field exposure incomparison with major standards andregulations such as Directive 2013/35/EU forworkplacesAutomatic exposure evaluation for variouswaveforms in compliance with Weighted RMSand Weighted Peak methodsEliminates the overestimation thatoccasionally occurs with FFT-based evaluationUltra wide frequency range(1 Hz to 400 kHz)Wide measurement range up to 80 mT(dependent on type)IEC/EN 62311 and 62233 standard compliantincluding isotropic 100 cm² and 3 cm² probeThree-axis analog signal outputExposure Level Tester ELT-400t a b l i s h e d1981NSTS 0714-E0205O 1 / 8Subject to change without noticeNSTS 0714-E0205O 2 / 8Subject to change without noticeAPPLICATIONSThe ELT-400 is an innovative exposure level meter for measuring magnetic fields in the workplace and in public spaces. The model is designed for health and safety professionals in industry, the insurance business and service industries.The instrument can simply and precisely handle practically any level measurement required in the low and medium-frequency range. It is comparable to the sound level meters that are commonly used in the assessment of noise at the workplace.Production AreasThe ELT-400 is useful for checking fields caused by various manufacturing plant, including induction heating, melting and hardening equipment. Thanks to its extremely low frequency limit and high power capability, it can also be used to check most magnetic stirrers.Special demands often occur with machinery in production areas where non-sinusoidal signals are common, e.g. in industrial applications that use resistance welding machinery (pulse waveform, phase angle control) with traditional 50/60 Hz systems, as well as in newer medium-frequency switching units.General EnvironmentThe different types of electronic article surveillance systems generate complex fields in public spaces. Most electromagnetic and magneto acoustic gates operate within the frequency range of the ELT-400.EMC Test HouseThe magnetic fields generated by household appliances or other electrical devices have become the focus of increased attention. Some new standards such as IEC/EN 62233 describe how to investigate such products. The ELT-400 is the ideal measuring device when it comes to compliance with these standards. Benefits include the perfectly matched frequency range and implementation of the specified transfer function.The ELT-400 allows to greatly simplify the assessment process. With EXPOSURE STD (Shaped Time Domain) mode, the instrument achieves a new standard in simple but reliable measurement of magnetic fields, whether in straightforward or in very complex field environments. Industrial melting furnaceResistance welding machinery in operation Magneto acoustic gate used for product surveillanceNSTS 0714-E0205O 3 / 8Subject to change without noticeThe easily misinterpreted time-consuming measurements with aspectrum analyzer or scope are rendered obsolete. Detailed knowledgeabout the evaluation procedure or the field waveform or frequency is nolonger needed. The results are reliable, and speed and ease of use aresignificantly better than all traditional methods.BASIC OPERATIONThe ELT-400 covers the wide frequency range of 1 Hz to 400 kHz. Themeasurement range of the ELT-400 is far wider than the reference limitsof common guidelines. The instrument has an external isotropicmagnetic field probe with a 100 cm2cross-sectional area. This issuitable for standards-compliant measurement even in non-homogeneous fields. The ELT-400 has a rugged housing and is easy tooperate using only six buttons. The measurement result and theinstrument settings are clearly displayed on a backlit LCD panel.The optional probe extension cable is specially designed for lowinfluence on the frequency response and sensitivity of the instrument.The cable is a good choice in cases where the probe and instrumentmust be handled separately. Variants of the ELT-400 are available withdifferent operating mode combinations, e.g. “Exposure STD” or “FieldStrength”. Please refer to the Ordering Information section for details.EXPOSURE STD (SHAPED TIME DOMAIN) MODESignal-Shaped-Independent Field EvaluationIn EXPOSURE STD mode, the level of the magnetic (B) field is directlydisplayed as a “Percent of Standard” regardless of the signal shape andfrequency. The numeric result clearly reflects the current situation andthe remaining safety margin. The method employed can be compared tosound level meters that are commonly used to determine noise in theworkplace.The variation with frequency specified in the standard is normalized bymeans of an appropriate filter. Users no longer need to know thefrequency or the frequency-dependent limits. The standard is easilyselected by pressing just one button. Multi-frequency signals are just aseasy to measure as single frequencies.Compliance testing of household appliancesCoupling factors can be determined in compliancewith IEC/EN 62233 by use of the optional 3 cm2 probeNSTS 0714-E0205O 4 / 8Subject to change without noticeThe newer safety standards and guidelines also specify waveform-specific evaluation procedures. For example, stationary sinusoidal and pulsed fields are differentiated. With the ELT-400 the waveform is automatically taken into account. Users no longer need any knowledge about the waveform or the duty cycle. Measurements on pulsed signals are also possible. Different evaluation patterns are occasionally specified in the standard for certain pulse waveforms. These patterns (valid for all imaginable waveforms) are directly handled by EXPOSURE STD mode. This completely eliminates the need to analyze the waveform in the time domain using a scope.Even when faced with pulses that include DC fields, the EXPOSURE STD method provides valuable results. The ELT-400 covers all the signal components down to 1 Hz that are relevant in assessing such a situation.Occasionally both the RMS value and the peak value are critical for assessing exposure in the low-frequency range. Both detector types are provided (Weighted RMS and Weighted Peak), and are simultaneously activated in the default setting. Depending on the incoming signal and standard selected, the most suitable detector is automatically employed at all times. The necessary weighting factors are also taken into account. The detectors may also be selected independently for further interpretation of the signal.Detailed knowledge of the field, the test equipment and other auxiliary conditions is necessary to obtain insight into the degree of exposure when using traditional analysis instruments. The exposure level is derived through extensive calculation. Results can be easily misinterpreted or other problems may occur. For example, FFT spectrum analysis tends to overestimate results for the ICNIRP standard. The ELT-400 continuously monitors the field, and the results are constantly updated. Any change in the field, e.g. due to a power reduction, can be evaluated immediately.Proper evaluation in a personal safety context is achieved quickly and reliably using the STD technique. In Exposure STD mode the result is displayed directly as a percentage of the permitted limitExposure STD automatically sets the prescribeddetector applicable for the selected standardNSTS 0714-E0205O 5 / 8 Subject to change without noticeFIELD STRENGTH MODEBroadband Field Strength MeasurementsIf the field under test is essentially a single frequency component, broadband mode is also a good choice.The ELT-400 provides an ultra wideband, flat frequency response. The measurement range can handle extremely high field strength levels. Both detectors, RMS and Peak, are available for broadband measurement. The field strength result is displayed in “Tesla”.ACTIVE FIELD PROBEThree-Axis Analog Signal OutputFor scientific studies or advanced signal-shape / frequency analysis, a scope or an FFT analyzer can be connected to the analog output. The output signal ensures proper phase within the three axes and covers the full bandwidth of the instrument.The buffered output provides an adequate voltage swing to allow forsimple operation.Broadband measurement in “mT”with RMS detectorThe oscilloscope display shows the welding current when using the analog signal output of ELT-400aa Unless otherwise stated, these specifications apply fort the reference condition: ambient temperature 23±3 °C,relative air humidity 40 % to 60 %, continuous wave signal (CW) and RMS detectionb Depends on type; see Ordering Informationc Detection: Automatic according to selected standard, for IEC/EN 62233 based on ICNIRP limit valuesd Includes flatness, isotropy, absolute and linearity variations (frequency range: 1 Hz to 400 kHz or 10 Hz to 400 kHz).The uncertainty increases at the frequency band limits to ±1 dB based on the nominal frequency response.e For Frequency Range 10 Hz to 400 kHz and 30 Hz to 400 kHz only.NSTS 0714-E0205O 6 / 8Subject to change without noticea Unless otherwise stated, these specifications apply for the reference condition: ambient temperature 23±3 °C,relative air humidity 40 % to 60 %, continuous wave signal (CW) and RMS detectionb Depends on type, see Ordering Informationc Detection: Automatic according to selected standard, for IEC 62233 based on ICNIRP limit valuesd Includes flatness, isotropy, absolute and linearity variations (frequency range: 1 Hz to 400 kHz or 10 Hz to 400 kHz).The uncertainty increases at the frequency band limits to ±1 dB based on the nominal frequency response.e For frequency range 10 Hz to 400 kHz and 30 Hz to 400 kHz only.NSTS 0714-E0205O 7 / 8Subject to change without noticeNSTS 0714-E0205O 8 / 8 Subject to change without notice® Names and Logo are registered trademarks of Narda Safety Test Solutions GmbH and L3 Communications Holdings, Inc. – Trade names are trademarks of the owners.Narda Safety Test Solutions GmbH Sandwiesenstrasse 772793 Pfullingen, Germany Phone: +49 7121 9732 0 Fax: +49 7121 9732 790E-Mail:*************************** Narda Safety Test Solutions 435 Moreland RoadHauppauge, NY 11788, USA Phone: +1 631 231-1700 Fax: +1 631 231-1711E-Mail:*******************Narda Safety Test Solutions Srl Via Leonardo da Vinci, 21/23 20090 Segrate (Milano) - Italy Phone: +39 02 2699871 Fax: +39 02 26998700E-mail:**************************www.narda-sts.it。
Agilent PNA系列RF网络分析器扩频范围升级套件说明书
Agilent Part Number:E8801-90026Printed in USADecember2001Installation NoteExtended Frequency Range Upgrade KitsFor PNA Series RF Network Analyzers (E8801A,E8802A,N3381A,and N3382A)Network Analyzer Model Number Upgrade Kit Part Number Frequency Extension E8801A,N3381A E8801-601013GHz to 6GHz E8801A,N3381A E8801-601023GHz to 9GHz E8802A,N3382AE8802-601016GHz to 9GHz1981Notice.The information contained in this document is subject to change without notice.Agilent Technologies makes no warranty of any kind with regard to this material,including but not limited to,the implied warranties of merchantability and fitness for a particular purpose.Agilent shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance,or use of this material.©Copyright2001Agilent Technologies,Inc.All rights reserved.About the Upgrade KitsProducts affected..........................E8801A,E8802A,N3381A,and N3382A;all options(See NOTE below.)Installation to be performed by..............Agilent service center,personnel qualifiedby Agilent,or customerEstimated installation time.................E8801A and N3381A–15minutesE8802A and N3382A–5minutesEstimated verification time.................5minutesEstimated calibration adjustment time........45minutesNOTE If the Time Domain option,Option010,is already installed on your analyzer,you will need a new license key for that option to function after installation of thefrequency upgrade.Contact Agilent for this new license key.If you need assistance,refer to“Getting Assistance from Agilent”on page5.Description of the UpgradesThese upgrade kits are used to extend the frequency range of the:•E8801A or N3381A PNA RF network analyzer from3GHz to either6GHz or9GHz•E8802A or N33802A PNA RF network analyzer from6GHz to9GHzInstallation Note E8801-900263Items Included in the Upgrade KitsThe following three tables list the parts included in the upgrade kits for the affected network analyzers.Check the contents of your kit against the appropriate list.If any item is missing or damaged,contact Agilent Technologies.Refer to“Getting Assistance from Agilent”on page5.Table1Option006Upgrade Kit to Extend the E8801A or N3381A to6GHz (E8801-60101)Description Qty Part Number Installation note(this document)1E8801-90026 License key certificate15964-5136Model number nameplate1E8802-80001 Model number nameplate1N3382-80001A12source assembly1E8803-60062 Table2Option009Upgrade Kit to Extend the E8801A or N3381A to9GHz (E8801-60102)Description Qty Part Number Installation note(this document)1E8801-90026 License key certificate15964-5136Model number nameplate1E8803-80001 Model number nameplate1N3383-80001A12source assembly1E8803-60062 Table3Option009Upgrade Kit to Extend the E8802A or N3382A to9GHz (E8802-60101)Description Qty Part Number Installation note(this document)1E8801-90026 License key certificate15964-5136Model number nameplate1E8803-80001 Model number nameplate1N3383-800014Installation Note E8801-90026Getting Assistance from AgilentBy internet,phone,or fax,get assistance with all your test and measurement needs. Table4Contacting AgilentOnline assistance:/find/assistUnited States (tel)180********Latin America(tel)(305)2697500(fax)(305)2697599Canada(tel)187********(fax)(905)282-6495Europe(tel)(+31)205472323 (fax)(+31)205472390Australia(tel)1800629485(fax)(+61)392105947New Zealand(tel)0800738378(fax)(+64)44958950Japan(tel)(+81)426567832 (fax)(+81)426567840Singapore(tel)180********(fax)(65)8360252Malaysia(tel)1800828848(fax)1800801664India(tel)1600112929 (fax)0008006501101Hong Kong(tel)800930871(fax)(852)25069233Taiwan(tel)0800047866(fax)(886)225456723Philippines(tel)(632)8426802(tel)(PLDT subscriber only) 180016510170(fax)(632)8426809(fax)(PLDT subscriber only) 180016510288Thailand(tel)(outside Bangkok)(088)226008(tel)(within Bangkok)(662)6613999(fax)(66)16613714People’s Republic of China(tel)(preferred)8008100189(tel)(alternate)108006500021(fax)108006500121Installation Note E8801-9002656Installation Note E8801-90026Installation Procedurefor the Upgrade KitThe network analyzer must be in proper working condition prior to installing this option.Any necessary repairs must be made before proceeding with this installation.WARNINGThis installation requires the removal of the analyzer’s protective outer covers.The analyzer must be powered down and disconnected from the mains supply before performing this procedure.Electrostatic Discharge ProtectionProtection against electrostatic discharge (ESD)is essential while removing or connecting cables or assemblies within the network analyzer.Static electricity can build up on your body and can easily damage sensitive internal circuit elements when discharged.Static discharges too small to be felt can cause permanent damage.To prevent damage to the instrument:•always wear a grounded wrist strap having a 1M 9resistor in series with it when handling components and assemblies.•always use a grounded,conductive table mat while working on the instrument.•always wear a heel strap when working in an area with a conductive floor.If you are uncertain about the conductivity of your floor,wear a heel strap.Figure 1shows a typical ESD protection setup using a grounded mat and wrist strap.Refer to “Tools and Equipment Required for the Installation”on page 7for part numbers.Figure 1ESD Protection SetupOverview of the Installation ProcedureNote that step2is necessary only for the E8801A and N3381A network analyzers because they require a new A12source assembly.1.Verify the serial and option numbers of the analyzer.2.Replace the A12source assembly(E8801A and N3381A only).3.Enter the new model number.4.Verify that the new model number is shown correctly.5.Replace the model number nameplate on the front panel.6.Perform source and receiver calibration adjustments.Tools and Equipment Required for the InstallationDescription Model/Part Number Tools for A12Source Assembly Replacement(E8801A and N3381A Only)T-10TORX driver(set to9in-lbs)N/AT-20TORX driver(set to21in-lbs)N/A5/16-inch open-end torque wrench(set to10in-lb)N/AESD EquipmentESD grounding wrist strap9300-13675ft grounding cord for wrist strap9300-09802x4ft conductive table mat and15ft grounding wire9300-0797ESD heel strap(for use with conductive floors)9300-1308Test Equipment for Calibration AdjustmentsPower meter E4419BPower sensor(100kHz–4.2GHz)8482APower sensor(10MHz–18GHz)E4412AType-N adapter(female-to-female)1250-0777Type-N RF cable N6314AStep1.Verify the Serial and Option Numbers of the AnalyzerRefer to the License Key Certificate supplied with the kit:•Verify that the analyzer’s serial number matches the serial number on the certificate.•Verify that the option number on the certificate is correct:M02for an E8801A6GHz upgrade;M03for an E880xA9GHz upgrade;M82for an N3381A6GHz upgrade;M83for an N338xA9GHz upgrade.If either the serial number or the option number does not match the expected results,you will not be able to install the option.If this is the case,contact Agilent for assistance.Refer to “Getting Assistance from Agilent”on page5.Installation Note E8801-900267Step2.Replace the A12Source Assembly(E8801A and N3381A Only) This step is necessary only for the E8801A and N3381A network analyzers.If installing an upgrade kit for the E8802A or N3382A network analyzer,proceed to Step3.Remove the Outer and Inner Covers from the AnalyzerRefer to Figure2for this procedure.Remove the Outer CoverCAUTION This procedure is best performed with the analyzer resting on its front handles in the vertical position.Do not place the analyzer on its front panel without thehandles.This will damage the front panel assemblies.1.Disconnect the power cord(if it has not already been disconnected).2.With a T-20TORX driver,remove the strap handles(item )by loosening the screws (item )on both ends until the handle is free of the analyzer.3.With a T-20TORX driver,remove the four rear panel feet(item )by removing the center screws(item ).4.Slide the four bottom feet(item )off the cover.5.Slide the cover off of the frame.Remove the Inner Cover1.With a T-10TORX driver,remove the15screws(item ).2.Lift off the cover.8Installation Note E8801-90026Installation Note E8801-900269Figure2Outer and Inner Cover Removal10Installation Note E8801-90026Replace theA12Source Assembly Refer to Figure 3for this step.1.Place the A31hard disk drive assembly in the service position.a.With a T-10TORX driver,remove the mounting screw (item).b.Move the HDDA to the outside of the analyzer and slide the HDDA bracket feet into the slots on the frame to the horizontal position.This is the service position.Figure 3Placing the A31HDDA in the Service PositionRefer to Figure 4for the following steps.2.Disconnect the two flexible cables (item )from the A12source assembly being careful to note their locations for reconnection later.CAUTIONBe careful not to damage the center pins of the semirigid cables.Some flexing of the cables is necessary to remove the assembly.Do not over-bend the semirigid cables.3.With a 5/16-in torque wrench,disconnect the two semirigid cables (item )from thebottom of the A12source assembly.CAUTIONTo avoid damage to the semirigid cables (item ),pull down on the cables from the bottom of the analyzer to move them away while sliding out the A12source assembly.The cables have some spring to them and the RF pins could be damaged by the A12source assembly .4.Slide the A12source assembly out of the analyzer.5.Slide the new A12source assembly into the analyzer being careful not to damage the semirigid cables.Refer to the CAUTION s above.6.With a5/16-in torque wrench,reconnect the two semirigid cables(item¦ )to the bottomof the A12source assembly.7.Reconnect the two flexible cables(item )to the A12source assembly.Refer to Figure3for the following steps.8.Reinstall the A31hard disk drive assembly into its original position.9.With a T-10TORX driver,replace the mounting screw(item )Figure4A12Source Assembly ReplacementReinstall the Inner and Outer CoversRefer to Figure5for this procedure.Reinstall the Inner Cover1.Place the inner cover on the analyzer.There are two alignment pins on the front framethat must be aligned with holes in the cover.2.With a T-10TORX driver,install the15screws(item ).Reinstall the Outer CoverCAUTION This procedure is best performed with the analyzer resting on its front handles in the vertical position.Do not place the analyzer on its front panel without thehandles.This will damage the front panel assemblies.1.Slide the cover onto the frame.2.With a T-20TORX driver,install the four rear panel feet(item )by installing the center screws(item ).3.Slide the four bottom feet(item )onto the cover.4.With a T-20TORX driver,install the strap handles(item )by tightening the screws(item )on both ends.Figure5Inner and Outer Cover ReinstallationStep3.Enter the New Model NumberProcedure Requirements•The analyzer must be powered up and operating to perform this procedure.•The Network Analyzer program must be running.•A keyboard is required for this procedure.•A mouse is recommended for this procedure but is not required.Mouse Procedure1.On the analyzer’s System menu,point to Service,then click Option Enable.2.Click Repair.3.Check Model shown is incorrect!,then click Begin Repair.4.In the Model Change box,select the appropriate new model number:E8802A or N3382A(for the6GHz upgrade)or E8803A or N3383A(for the9GHz upgrade).ing the keyboard,enter the keyword in the box provided.The keyword is printed on theLicense Key Certificate.Enter this keyword exactly as it is printed on the certificate.6.Click Enter Model.7.Verify that the new model number displayed is correct,then click YES.If it is not correct,click NO and repeat the repair.8.When the installation is complete,click Exit.Front Panel Keys Procedure1.In the COMMAND block,press Menu/Dialog.2.In the NAVIGATION block,press the Right Tab and Arrows to move over to the Systemmenu and down to the Service selection.Press the Right Tab to display the extended menu and the Arrows to select Option Enable.Press Click.3.Press Menu/Dialog,then press R on the keyboard to select Repair.4.Tab to Model shown is incorrect!,then press Click.5.Tab to the Model Change box,then use the Arrows to select the appropriate new modelnumber:E8802A or N3382A(for the6GHz upgrade)or E8803A or N3383A(for the9GHz upgrade).6.Tab to the Keyword box and,using the keyboard,enter the keyword.The keyword isprinted on the License Key Certificate.Enter this keyword exactly as it is printed on the certificate.7.Tab to Enter Model,then press Click.8.Verify that the new model number displayed is correct,then tab to Yes and press Click.Ifit is not correct,tab to NO,press Click,and repeat the repair.9.When the installation is complete,Tab to Exit,then press Click.Step4.Verify that the New Model Number Is Shown Correctly Procedure Requirements•The analyzer must be powered up and operating to perform this procedure.•The Network Analyzer program must be running.•A mouse is recommended for this procedure but is not required.Mouse Procedure1.On the analyzer’s Help menu,click About Network Analyzer.2.Verify that the new model number is shown correctly in the display.Click OK.3.On the analyzer front panel,press Preset.Verify that the full frequency range of theanalyzer is correct.Front Panel Keys Procedure1.In the COMMAND block,press Menu/Dialog.2.In the NAVIGATION block,press the Right Tab and Arrows to move over to the Help menu,and down to the About Network Analyzer selection.Press Click.3.Verify that the new model number is shown correctly,then press Click.4.On the analyzer front panel,press Preset.Verify that the full frequency range of theanalyzer is correct.Step5.Replace the Model Number Nameplate on the Front Panel Refer to Figure6for this procedure.Remove the Old Nameplateing a sharp object such as a knife blade,lift one end of the old nameplate(item ).Becareful not to scratch the painted surface.ing your fingers,pull the nameplate completely off of the front panel and discard it.3.If any adhesive remains on the front panel surface,it can be removed by rubbing it withyour finger.Do not use a sharp object to remove this adhesive.If necessary,the surface can be cleaned with isopropol alcohol.Install the New NameplateNOTE There are two nameplates provided in the upgrade kit.Make sure that you install the correct one for your analyzer.The E8802A and E8803A nameplatesare for2-port analyzers,and the N3382A and N3383A nameplates are for3-portanalyzers.1.Remove the protective backing from the new nameplate to expose the adhesive.Avoidtouching the adhesive with your fingers as this may affect its ability to adhere to the front panel surface.2.Loosely align the new nameplate over the recess in the front panel and apply lightly.3.Once the overlay is properly aligned,press it firmly onto the surface to secure it.Figure6Model Number Nameplate ReplacementStep6.Perform Source and Receiver Calibration AdjustmentsThe following adjustments must be made due to the change in the full frequency range of the analyzer.Source Calibration AdjustmentThe source calibration is used to adjust your network analyzer for a flat source power across its full frequency range.The differences between Port1and Port2are negligible;therefore,a Port2adjustment is not required.1.Connect the equipment as shown in Figure7.Connect a GPIB cable between the networkanalyzer and the power meter.Figure7Setup for the Source Calibration Adjustment2.On the System menu,point to Service,Adjustments,then click Source Calibration.3.Ensure the GPIB settings are correct.4.Click Calibrate,then follow the instructions as they are displayed.Receiver Calibration AdjustmentThe receiver calibration is used to adjust the network analyzer receivers for a flat response across its full frequency range.A power meter is connected to Port1,as shown inFigure8,to establish a reference for flatness.A signal from Port1,as shown inFigure9,is used to adjust the“B”receiver at Port2.The adjustment is repeated using a signal from Port2to adjust the“A”receiver at Port1.1.Connect the equipment as shown in Figure8.Connect a GPIB cable between the networkanalyzer and the power meter.Figure8Setup for the Receiver Calibration AdjustmentFigure9Setup for the Receiver Calibration Adjustment of Port22.On the System menu,point to Service,Adjustments,then click Receiver Calibration.3.Ensure the GPIB settings are correct.4.Click Calibrate,then follow the instructions as they are displayed.Performance Tests and System VerificationThe analyzer should now operate and phase lock over its entire frequency range.If you experience difficulty with the basic functioning of the analyzer,contact Agilent.Refer to “Getting Assistance from Agilent”on page5.Although the analyzer functions,its performance relative to its specifications has not been verified for the additional frequency range enabled by this upgrade.It is recommended that a full instrument calibration be performed using the N2721A performance test software.If the testing of the analyzer’s full range of specifications is not required,a system verification can be performed.Refer to the analyzer’s Service Guide for information on performance tests and system verification.。
E63,最新code码
E63最新CODE码查询0561988 RM-437 CTR EURO-A Ultramarine 200.21.012 GENERIC UK KEYBOARD LAYOUT0564064 RM-437 CTR MEA-A1 Arabic Ultramarine 200.21.0120567293 RM-437 CTR EURO B1 Ultramarine 200.21.0120568632 RM-437 CTR EURO B2 Ultramarine 200.21.0120568705 RM-437 CTR EURO-C Ultramarine 200.21.0120568835 RM-437 CTR EURO-C ALS ON Ultramarine 200.21.0120568836 RM-437 CTR EURO-D Ultramarine 200.21.0120568837 RM-437 CTR EURO-D ALS ON Ultramarine 200.21.0120568838 RM-437 CTR EURO-E1 Ultramarine 200.21.012 SPANISH KEYBOARD LAYOUT0568839 RM-437 CTR EURO-E2 Ultramarine 200.21.012 PORTUGUESE KEYBOARD LAYOUT0568840 RM-437 CTR EURO-F Ultramarine 200.21.0120568841 RM-437 CTR EURO-G1 Ultramarine 200.21.0120568842 RM-437 CTR EURO-G2 Ultramarine 200.21.0120568843 RM-437 CTR EURO-N Ultramarine 200.21.0120568868 RM-437 CTR EURO-H Ultramarine 200.21.0120568869 RM-437 CTR EURO-I Ultramarine 200.21.0120568870 RM-437 CTR EURO-J Ultramarine 200.21.0120568878 RM-437 CTR EURO-K1 Ultramarine 200.21.0120568879 RM-437 CTR EURO-K1 CIS Ultramarine 200.21.0120568880 RM-437 CTR EURO-K2 Ultramarine 200.21.0120568881 RM-437 CTR EURO-K1 UA Ultramarine 200.21.0120568882 RM-437 CTR EURO-K1 Moldova Ultramarine 200.21.0120568883 RM-437 CTR EURO-L Ultramarine 200.21.0120568885 RM-437 CTR EURO-M Ultramarine 200.21.0120568886 RM-437 CTR EURO-M ALS ON Ultramarine 200.21.0120568887 RM-437 CTR EURO-Y Ultramarine 200.21.0120568888 RM-437 CTR MEA-A2 Ultramarine 200.21.0120568889 RM-437 CTR MEA-B1 Ultramarine 200.21.0120568890 RM-437 CTR MEA-F1 Pakistan Ultramarine 200.21.0120568891 RM-437 CTR MEA-B3 Ultramarine 200.21.0120568893 RM-437 CTR MEA-D Ultramarine 200.21.0120568894 RM-437 CTR MEA-F1 South-Afr. Ultramarine 200.21.0120568897 RM-437 CTR MEA-F1 Ultramarine 200.21.0120568898 RM-437 CTR MEA-F2 Ultramarine 200.21.0120568936 RM-437 CTR APAC-R Singapore Ultramarine 200.21.0120568937 RM-437 CTR APAC-R Indonesia Ultramarine 200.21.0120568939 RM-437 CTR APAC-U Ultramarine 200.21.0120568940 RM-437 CTR APAC-S Ultramarine 200.21.0120568941 RM-437 CTR APAC-S Bangladesh Ultramarine 200.21.012 0568942 RM-437 CTR APAC-S Australia Ultramarine 200.21.0120568943 RM-437 CTR APAC-S NewZealand Ultramarine 200.21.012 0568944 RM-437 CTR APAC-S Philippines Ultramarin 200.21.012 0568945 RM-437 CTR APAC-T Ultramarin 200.21.0120569321 RM-437 CTR EURO-A Ruby 200.21.0120569390 RM-437 CTR MEA-A1 Arabic Ruby 200.21.0120569587 RM-437 CTR EURO B1 Ruby 200.21.0120569588 RM-437 CTR EURO B2 Ruby 200.21.0120569900 RM-437 CTR EURO-C Ruby 200.21.0120569901 RM-437 CTR EURO-C ALS ON Ruby 200.21.012 0569902 RM-437 CTR EURO-D Ruby 200.21.0120569903 RM-437 CTR EURO-D ALS ON Ruby 200.21.012 0569904 RM-437 CTR EURO-E1 Ruby 200.21.0120569905 RM-437 CTR EURO-E2 Ruby 200.21.0120569906 RM-437 CTR EURO-F Ruby 200.21.0120569907 RM-437 CTR EURO-G1 Ruby 200.21.0120569908 RM-437 CTR EURO-G2 Ruby 200.21.0120569909 RM-437 CTR EURO-N Ruby 200.21.0120569910 RM-437 CTR EURO-H Ruby 200.21.0120569911 RM-437 CTR EURO-I Ruby 200.21.0120569913 RM-437 CTR EURO-J Ruby 200.21.0120569914 RM-437 CTR EURO-K1 Ruby 200.21.0120569915 RM-437 CTR EURO-K1 CIS Ruby 200.21.0120569916 RM-437 CTR EURO-K2 Ruby 200.21.0120569917 RM-437 CTR EURO-K1 UA Ruby 200.21.0120569918 RM-437 CTR EURO-K1 Moldova Ruby 200.21.012 0569919 RM-437 CTR EURO-L Ruby 200.21.0120569921 RM-437 CTR EURO-M Ruby 200.21.0120569922 RM-437 CTR EURO-M ALS ON Ruby 200.21.012 0569923 RM-437 CTR EURO-Y Ruby 200.21.0120569931 RM-437 CTR MEA-A2 Ruby 200.21.0120569932 RM-437 CTR MEA-B1 Ruby 200.21.0120569933 RM-437 CTR MEA-F1 Pakistan Ruby 200.21.012 0569934 RM-437 CTR MEA-B3 Ruby 200.21.0120569935 RM-437 CTR MEA-D Ruby 200.21.0120569936 RM-437 CTR MEA-F1 South-Afr. Ruby 200.21.012 0569937 RM-437 CTR MEA-F1 Ruby 200.21.0120569938 RM-437 CTR MEA-F2 Ruby 200.21.0120569941 RM-437 CTR APAC-R Singapore Ruby 200.21.012 0569942 RM-437 CTR APAC-R Indonesia Ruby 200.21.012 0569943 RM-437 CTR APAC-U Ruby 200.21.0120569944 RM-437 CTR APAC-S Ruby 200.21.0120569945 RM-437 CTR APAC-S Bangladesh Ruby 200.21.012 0569946 RM-437 CTR APAC-S Australia Ruby 200.21.012 0569947 RM-437 CTR APAC-S NewZealand Ruby 200.21.0120569948 RM-437 CTR APAC-S Philippines Ruby 200.21.0120569949 RM-437 CTR APAC-T Ruby 200.21.0120572514 RM-437 CTR APAC-S India Ruby 200.21.0120572527 RM-437 CTR APAC-S India Ultramarine 200.21.0120573388 E63-1 RM-437 CTR SWAP MEA-F1 South-Afr. Ultram 100.21.110 0575097 RM-437 CTR APAC-R CAMBODIA Ruby 200.21.0120575098 RM-437 CTR APAC-R CAMBODIA Ultramarine 200.21.012 0576446 E63-1 RM-437 Country Variant United Kingdom GB v2 Red E63-1 RM-437 Country Variant United Kingdom GB v3 Red Java Games0576447 E63-1 RM-437 Country Variant United Kingdom GB v2 Blue_COLOR E63-1 RM-437 Country Variant United Kingdom GB v3 Blue JavaUpdate_COLOR0577242 E63-1 RM-437 TIM IT IT blue V1 110.21.0060578140 RM-437 CTR APAC-Q Ultramarine 200.21.0120578141 RM-437 CTR APAC-Q Ruby 200.21.0120578489 E63-1 RM-437 Country Variant Finland FI BLUE V1_COLOR E63-1 RM-437 Country Variant Finland FI BLUE V1_COLOR0578493 E63-1 RM-437 Country Variant Finland FI RED V1 E63-1 RM-437 Country Variant Finland FI RED V10579637 E63-1 RM-437 Country Variant Estonia EE RUBY RED 3 Games V1 100.21.1100579639 E63-1 RM-437 Country Variant Estonia EE BLUE 3 Games V1_COLOR 100.21.1100579641 200.21.012 E63-1 RM-437 Country Variant Croatia HR Ultramarine blue0579877 200.21.012 E63-1 RM-437 Si***l d.d. SI Ultramarine blue 0580760 200.21.012 E63-1 RM-437 Country Variant Croatia HR Ruby redCU_COLOR0581516 200.21.012 E63-1 RM-437 Turkcell TR V10581753 E63-1 RM-437 HK Country Variant HK Red V2 110.21.006 0581754 E63-1 RM-437 HK Country Variant HK Blue V2_COLOR 110.21.006 0582369 RM-437 CTR EURO-A Midnight Black 200.21.0120582428 RM-437 CTR EURO B1 Midnight Black 200.21.0120582429 RM-437 CTR EURO B2 Midnight Black 200.21.0120582435 RM-437 CTR EURO-C Midnight Black 200.21.0120582436 RM-437 CTR EURO-C ALS ON Midnight Black 200.21.0120582441 RM-437 CTR EURO-D Midnight Black 200.21.0120582443 RM-437 CTR EURO-D ALS ON Midnight Black 200.21.0120582444 RM-437 CTR EURO-E1 Midnight Black 200.21.0120582445 RM-437 CTR EURO-E2 Midnight Black 200.21.0120582446 RM-437 CTR EURO-F Midnight Black 200.21.0120582448 RM-437 CTR EURO-G1 Midnight Black 200.21.0120582449 RM-437 CTR EURO-G2 Midnight Black 200.21.0120582450 RM-437 CTR EURO-N Midnight Black 200.21.0120582451 RM-437 CTR EURO-H Midnight Black 200.21.0120582452 RM-437 CTR EURO-I Midnight Black 200.21.0120582454 RM-437 CTR EURO-J Midnight Black 200.21.0120582455 RM-437 CTR EURO-K1 Midnight Black 200.21.0120582456 RM-437 CTR EURO-K1 CIS Midnight Black 200.21.0120582459 RM-437 CTR EURO-K2 Midnight Black 200.21.0120582460 RM-437 CTR EURO-K1 UA Midnight Black 200.21.0120582461 RM-437 CTR EURO-K1 Moldova Midnight Black 200.21.012 0582462 RM-437 CTR EURO-L Midnight Black 200.21.0120582464 RM-437 CTR EURO-M Midnight Black 200.21.0120582465 RM-437 CTR EURO-M ALS ON Midnight Black 200.21.012 0582466 RM-437 CTR EURO-Y Midnight Black 200.21.0120582467 RM-437 CTR MEA-A1 Arabic Midnight Black 200.21.0120582468 RM-437 CTR MEA-A2 Midnight Black 200.21.0120582470 RM-437 CTR MEA-B1 Midnight Black 200.21.0120582471 RM-437 CTR MEA-F1 Pakistan Midnight Black 200.21.012 0582472 RM-437 CTR MEA-B3 Midnight Black 200.21.0120582473 RM-437 CTR MEA-D Midnight Black 200.21.0120582474 RM-437 CTR MEA-F1 Midnight Black 200.21.0120582475 RM-437 CTR MEA-F2 Midnight Black 200.21.0120582476 RM-437 CTR APAC-Q Midnight Black 200.21.0120582477 RM-437 CTR APAC-R Singapore Midnight Black 200.21.012 0582478 RM-437 CTR APAC-R Indonesia Midnight Black 200.21.012 0582479 RM-437 CTR APAC-R CAMBODIA Midnight Black 200.21.012 0582480 RM-437 CTR APAC-U Midnight Black 200.21.0120582481 RM-437 CTR APAC-S Midnight Black 200.21.0120582483 RM-437 CTR APAC-S India Midnight Black 200.21.0120582485 RM-437 CTR APAC-S Bangladesh Midnight Black 200.21.012 0582486 RM-437 CTR APAC-S Australia Midnight Black 200.21.012 0582487 RM-437 CTR APAC-S NewZealand Midnight Black 200.21.012 0582488 RM-437 CTR APAC-S Philippines Midnight Black 200.21.012 0582632 E63-1 RM-437 Virgin Australia AU Red V1 200.21.0120582793 E63-1 RM-437 Vodafone New Zealand NZ Local Blue V1 110.21.006 0582794 E63-1 RM-437 3 ROI IE Red V1 GV 100.21.1100582795 E63-1 RM-437 3 UK GB GV V1 (Blue) GV 100.21.1100582796 200.21.012 E63-1 RM-437 Si***l d.d. SI Ruby red CU_COLOR 0583689 RM-437 CTR APAC-T Midnight Black 200.21.0120583825 E63-1 RM-437 Optimus PT V1-Blue 110.21.0060583827 200.21.012 E63-1 RM-437 3 AT AT ULTRA BLUE GV0583838 E63-1 RM-437 Vodafone Spain ES RED 100.21.1100584422 E63-1 RM-437 Mobistar BE Blue v1 110.21.0060584456 E63-1 RM-437 Vipnet HR Black 110.21.0060584467 E63-1 RM-437 Country Variant Finland FI BLACK V1_COLOR E63-1 RM-437 Country Variant Finland FI BLACK V1_COLOR0584592 E63-1 RM-437 O2 Ireland IE Ultra Blue V1 100.21.1100584630 RM-437 CTR MEA-F1 South-Afr. Midnight Black 200.21.012 0585258 E63-1 RM-437 3 UK GB GV V1 (Black) GV 100.21.1100585480 E63-1 RM-437 Vodacom ZA Black V1 110.21.0060585481 110.21.006 E63-1 RM-437 MTN ZA Black V10585804 E63-1 RM-437 Virgin Australia AU Black V1_COLOR 100.21.110 0585866 E63-1 RM-437 TeliaSonera Finland FI SIML RevB.1 Red E63-1 RM-437 TeliaSonera Finland FI SIML RevB.1 Red0586830 E63-1 RM-437 O2 Ireland IE Black O2_COLOR 100.21.110 0586843 200.21.012 E63-1 RM-437 TeliaSonera Finland FI RevB.1Blue_COLOR0587650 E63-1 RM-437 Virgin UK GB V1 Black_COLOR 100.21.110 0587800 E63-1 RM-437 Optimus PT V1-Black_COLOR 110.21.0060588052 200.21.012 E63-1 RM-437 Orange Spain ES Black0588186 200.21.012 E63-1 RM-437 Vodafone Ireland IE Black V10588200 E63-1 RM-437 Vodafone Portugal PT V1 - Blue 110.21.006 0588659 200.21.012 E63-1 RM-437 Vodafone UK GB Contract Black 0589029 E63-1 RM-437 Play Mobile PL (black)_COLOR 110.21.006 0590143 200.21.012 E63-1 RM-437 Virgin Mobile France FR Black Virgin V1 0590454 200.21.012 E63-1 RM-437 Virgin Australia AU Black V1 SIM Lock。
“A”字头代码（SMDMarkingCode）一
“A”字头代码(SMD Marking Code)一代码规格型号生产商封装备注A94 SMV1202-94 SOT23AA1 SMV1211-001 SOT23AB1 SMV1212-001 SOT23AB3 SMV1212-004 SOT23AC1 SMV1222-001 SOT23AD1 SMV1223-001 SOT23AE1 SMV1225-001 SOT23AEG SMV1204-68 SOT23AF1 SMV1249-001 SOT23AF3 SMV1249-004 SOT23AF9 SMV1249-003 SOT23AG1 SMV1250-001 SOT23AG3 SMV1250-004 SOT23AH1 SMV1251-001 SOT23AH3 SMV1251-004 SOT23AH9 SMV1251-003 SOT23AJ1 SMV1253-001 SOT23AJ3 SMV1253-004 SOT23AK1 SMV1255-001 SOT23AK3 SMV1255-004 SOT23AK9 SMV1255-003 SOT23AM1 SMV1422-001 SOT23AN1 SMV1203-91 SOT23AP1 A21096V434 SOT23AQ1 SMV1236-001 SOT23AQ3 SMV1236-004 SOT23AQ9 SMV1236-003 SOT23AR1 SMV1413-001 SOT23AR3 SMV1413-004 SOT23AS1 SMV1414-001 SOT23AS3 SMV1414-004 SOT23AT1 SMV1415-001 SOT23AT3 SMV1415-004 SOT23AU1 SMV1416-001 SOT23AU3 SMV1416-004 SOT23AV1 SMV1417-001 SOT23AV3 SMV1417-004 SOT23AW1 SMV1411-04 SOT23AX1 SMV1404-001 SOT23AY1 SMV1146-001 SOT23AZ1 SMV1410-001 SOT23AZ3 SMV1410-004 SOT23A BA892 Sie SCD80 35V 100mA pinA 1SS355 Roh USM 100V 50mA swA MRF947 Mot SOT323 npn RF 8 GHzA0 HSMS-2800 HP SOT23 HP2800 schottkyA0 HSMS-280B HP SOT323 HP2800 schottkyA03 VAM-03 MC - modamp MAR 3 Similar A06 VAM-06 MC - modamp MAR 6 Similar A07 VAM-07 MC - modamp MAR 7 Similar A1 HSMS-2801 HP - HP2800 schottkyA1 BAW56W Phi SOT323 dual ca BAW62 (1N4148) A1 BAW56 Phi SOT23 dual ca BAW62 (1N4148) A1 BAW56 Phi SOT23 dual ca BAW62 (1N4148) A1p BAW56 Phi SOT23 dual ca BAW62 (1N4148) A1t BAW56T Phi SOT416 dual ca BAW62 (1N4148) A1t BAW56S Phi SOT363 dual ca BAW62 (1N4148) A1s BAW56W Sie SOT323 dual ca BAW62 (1N4148) A1s BAW56 Sie SOT23 dual ca BAW62 (1N4148)A1s BAW56U Sie SC74 dual ca BAW62 (1N4148) A1X MBAW56 Mot - dittoA2 HSMS-2802 HP SOT23 dual HP2800A2 HSMS-280C HP SOT323 dual HP2800A2 BAT18 Phi SOT23 BA482A2s BAT18 Sie SOT23 BA482A2 MMBD2836 Mot SOT23 dual ca sw diode 75V A2 CFY30 Sie SOT143 n-ch GaAsfet 6 GHzA2 MBT3906DW1 Mot SOT363 dual 2N3906A22 BAS21 Phi SOD27 BAV21A2X MMBD2836 Mot SOT23 dual ca sw 75V 100mA 15nsA3 BAP64-03 Phi SOD323 3 GHz pin diode A3 HSMS-2803 HP SOT23 HP2800 ser pairA3 MMBD1005 Mot SOT23 dual ca Si diode low leakageA3 BAS16 Zet - Si sw 75V 100mA A3 BAT17 Phi SOT23 BA481A3p BAT17 Phi SOT23 BA481A3t BAT17 Phi SOT23 BA481A3 MBT3906DW Mot SOT363 dual 2N3906A3X MMBD2835 Mot SOT23 dual ca sw 35V 100mA 15nSA4 HSMS-2804 HP SOT23 dual cc HP2800 schottky A4s BAV70W Sie SOT323 dual cc BAW62A4s BAV70 Sie SOT23 dual cc BAW62A4s BAV70T Sie SOT416 dual cc BAW62A4s BAV70U Sie SC74 dual cc BAW62A4 BAV70W Phi SOT323 dual cc BAW62A4p BAV70 Phi SOT23 dual cc BAW62A4t BAV70 Phi SOT23 dual cc BAW62A4t BAV70 Phi SOT363 dual cc BAW62A4X MBAV70 Mot - dittoA5 BAP51-03 Phi SOD323 GP RF pin diodeA5p BRY61 Phi SOT143 -A5t BRY61 Phi SOT143 -A5 HSMS-2805 HP SOT143 dual HP2800 schottky A5 MMBD1010 Mot SOT23 dual cc Si diodesA5 MMBD2837 Mot SOT23 dual cc diodes 30V 150mAA6s BAS16W Sie SOT323 BAW62 (1N4148)A6s BAS16 Sie SOT23 BAW62 (1N4148)A6s BAS16U Sie SC74 BAW62 (1N4148)A6 BAS16W Phi SOT323 BAW62 (1N4148)A6p BAS16 Phi SOT23 BAW62 (1N4148)A6t BAS16 Phi SOT23 BAW62 (1N4148)A6 BAS16T Phi SOT416 BAW62 (1N4148)A6 BAS216 Phi SOD110 BAW62 (1N4148)A6p BAS316 Phi SOD323 BAW62 (1N4148)A6 MMBD2836 Mot SOT23 dual sw diode cc 75V A6A MMUN2111 Mot SOT23 pnp dtr 10k+10kA6B MMUN2112 Mot SOT23 pnp dtr 22k+22kA6C MMUN2113 Mot SOT23 pnp dtr 47k+47kA6D MMUN2114 Mot SOT23 pnp dtr 100k+100kA6E MMUN2115 Mot SOT23 pnp dtr R1 10kA6F MMUN2116 Mot SOT23 pnp dtr R1 4k7A6G MMUN2130 Mot SOT23 pnp dtr 1k0+1k0A6H MMUN2131 Mot SOT23 pnp dtr 2k2+2k2A6J MMUN2132 Mot SOT23 pnp dtr 4k7+4k7A6K MMUN2133 Mot SOT23 pnp dtr 4k7+47kA6L MMUN2134 Mot SOT23 pnp dtr 22k+47kA6X MMBD2838 Mot SOT23 dual sw 50V 100mAA7s BAV99 Sie SOT23 dual ser BAW92A7s BAV99W Sie SOT323 dual ser BAW92A7s BAV99T Sie SC75 dual ser BAW92A7s BAV99U Sie SC74 dual ser BAW92A7 BAV99W Phi SOT323 dual ser BAW92A7 BAV99 Phi SOT23 dual ser BAW92A7 HSMS-2807 HP SOT143 HP2800 ring quadA8 HSMS-2808 HP SOT143 HP2800 bridge quadA8 BAP50-03 Phi SOD323 GP RF pin diodeA8 BAS19 Phi SOT23 BAV19A8 SI2308DS Sil SOT23 N-ch mosfet, 60V 0.1A A8A MMUN2211 Mot SOT23 npn dtr 10k +10kA8B MMUN2212 Mot SOT23 npn dtr 22k +22kA8C MMUN2213 Mot SOT23 npn dtr 47k+47kA8D MMUN2214 Mot SOT23 npn dtr 100k+100kA8E MMUN2215 Mot SOT23 npn dtr R1 10kA8F MMUN2216 Mot SOT23 npn dtr R1 4k7A8G MMUN2230 Mot SOT23 npn dtr 1k0 +1k0A8H MMUN2231 Mot SOT23 npn dtr 2k2+2k2A8J MMUN2232 Mot SOT23 npn dtr 4k7+4k7A8K MMUN2233 Mot SOT23 npn dtr 4k7+47kA8L MMUN2234 Mot SOT23 npn dtr 22k+47kA9 SI2309DS Sil SOT23 P-ch mosfet, 60V 0.1A A11 MMBD1501A Fch SOT23 180V 200mA diodeA13 MMBD1503A Fch SOT23 180V 200mA dual diode seriesA14 MMBD1504A Fch SOT23 180V 200mA dual diode ccA15 MMBD1505A Fch SOT23 180V 200mA dual diode caA16 ZC934A Zet SOT23 25-95pF hyperabrupt varicapA17 ZC933A Zet SOT23 12-42pF hyperabrupt varicapA51 BRY62 Phi SOT143 -A81 BAS20 Phi SOT23 BAV20 A82 BAS21 Phi SOT23 BAV21 A91 BAS17 Phi SOT23 BA314AA BCX51 Sie SOT89 pnp 45V audio comp BCX54AA BCW60A TT SOT23 BCY58-viiAA ZMV829A Zet SOD323 varicap hyperabrupt 28V 8.2pF@2VAAs BCW60A Sie SOT23 BCY58-viiAAA MMBF4856 Mot SOT23 2N4856 n-ch chopper jfetAAAA MAX809LXR MAX SOT23 microproc -ve reset gen 5.0VAAAX MAX2470 MAX SOT23-6 VCO Buffer Amplifiers AAAY MAX2471 MAX SOT23-6 VCO Buffer Amplifiers AAG MMBR951AL Mot SOT23 npn RF 8GHzAAH MAX6326_R22-T Max SC70 microproc -ve reset gen 2.200VAAI MAX6327_R22-T Max SC70 microproc +ve reset gen 2.200VAAJ MAX6328_R22-T Max SC70 microproc -ve reset gen 2.200VAAK MAX6410BS33-T Max UCSP-4 Volt. Detect. (3.300 V /Push-Pull,Active-High )AAL MAX6410BS34-T Max UCSP-4 Volt. Detect. (3.400 V /Push-Pull,Active-High )AAM MAX6410BS35-T Max UCSP-4 Volt. Detect. (3.500 V /Push-Pull,Active-High )AAN MAX6410BS36-T Max UCSP-4 Volt. Detect. (3.600 V /Push-Pull,Active-High )AAN MAX809LXR Max SC70 microproc -ve reset gen5.0VAAO MAX6410BS37-T Max UCSP-4 Volt. Detect. (3.700 V /Push-Pull,Active-High )AAO MAX809MXR Max SC70 microproc -ve reset gen 5.0VAAP MAX6410BS38-T Max UCSP-4 Volt. Detect. (3.800 V /Push-Pull,Active-High )AAP MAX809TXR Max SC70 microproc -ve reset gen 3.3VAAQ MAX6410BS39-T Max UCSP-4 Volt. Detect. (3.900 V /Push-Pull,Active-High )AAQ MAX809SXR Max SC70 microproc -ve reset gen 3.3VAAR MAX6410BS40-T Max UCSP-4 Volt. Detect. (4.000 V /Push-Pull,Active-High )AAR MAX809RXR Max SC70 microproc -ve reset gen 3.0VAAS MAX6410BS41-T Max UCSP-4 Volt. Detect. (4.100 V /Push-Pull,Active-High )AAS MAX803ZXR Max SC70 microproc -ve reset gen 2.5VAAT MAX6410BS42-T Max UCSP-4 Volt. Detect. (4.200 V /Push-Pull,Active-High )AAT MAX810LXR Max SC70 microproc +ve reset gen 5.0VAAU MAX6410BS43-T Max UCSP-4 Volt. Detect. (4.300 V /Push-Pull,Active-High )AAU MAX810MXR Max SC70 microproc +-ve reset gen 5.0VAAV MAX6410BS44-T Max UCSP-4 Volt. Detect. (4.380 V /Push-Pull,Active-High )AAV MAX810TXR Max SC70 microproc +ve reset gen 3.3VAAW MAX6410BS45-T Max UCSP-4 Volt. Detect. (4.500 V /Push-Pull,Active-High )AAW MAX810RXR Max SC70 microproc +ve reset gen 3.0VAAX MAX6410BS46-T Max UCSP-4 Volt. Detect. (4.630 V /Push-Pull,Active-High )AAX MAX810SXR Max SC70 microproc +ve reset gen 3.3VAAY MAX6411BS33-T Max UCSP-4 Volt. Detect. (3.300V/OpenDrain,Active-Low)AAY MAX810ZXR Max SC70 microproc +ve reset gen 2.5VAAZ MAX6411BS34-T Max UCSP-4 Volt. Detect. (3.400 V/OpenDrain,Active-Low)AAZ MAX803LXR Max SC70 microproc -ve reset gen 5.0VAB BCW60B ITT SOT23 BCY58-viiiAB ZMV830A Zet SOD323 varicap hyperabrupt 28V 10pF@2VABs BCW60B Sie SOT23 BCY58-viii ABp BCW60B Phi SOT23 BCY58-viii ABt BCW60B Phi SOT23 BCY58-viiiABA MAX6411BS35-T Max UCSP-4 Volt. Detect. (3.500 V/OpenDrain,Active-Low)ABA MAX803TXR Max SC70 microproc -ve reset gen 5.0VABAA MAX809MXR Max SOT23 microproc -ve reset gen 5.0VABB MAX6411BS36-T Max UCSP-4 Volt. Detect. (3.600 V/OpenDrain,Active-Low)ABB MAX803MXR Max SC70 microproc -ve reset gen 3.3VABC MAX6411BS37-T Max UCSP-4 Volt. Detect. (3.700 V/OpenDrain,Active-Low)ABC MAX803SXR Max SC70 microproc -ve reset gen 3.3VABD MAX6411BS38-T Max UCSP-4 Volt. Detect. (3.800 V/OpenDrain,Active-Low)ABD MAX803RXR Max SC70 microproc -ve reset gen 3.0VABE MAX6411BS39-T Max UCSP-4 Volt. Detect. (3.900 V/OpenDrain,Active-Low)ABE MAX803ZXR Max SC70 microproc -ve reset gen 2.5VABF MAX6411BS40-T Max UCSP-4 Volt. Detect. (4.000 V/OpenDrain,Active-Low)ABF LM4041AIX3-1.2Max SC70 1.225V 0.1% shunt V refABG MAX6411BS41-T Max UCSP-4 Volt. Detect. (4.100 V/OpenDrain,Active-Low)ABG LM4041BIX3-1.2Max SC70 1.225V 0.2% shunt V refABH MAX6411BS42-T Max UCSP-4 Volt. Detect. (4.200 V/OpenDrain,Active-Low)ABH LM4041DIX3-1.2Max SC70 1.225V 0.5% shunt V refABI MAX6411BS43-T Max UCSP-4 Volt. Detect. (4.300 V/OpenDrain,Active-Low)ABI LM4041DIX3-1.Max SC70 1.225V 1.5% shunt V ref2ABJ MAX6411BS44-T Max UCSP-4 Volt. Detect. (4.380 V/OpenDrain,Active-Low)ABJ LM4040AIX3-2.1Max SC70 2.048V 0.1% shunt V refABK MAX6411BS45-T Max UCSP-4 Volt. Detect. (4.500 V/OpenDrain,Active-Low)ABK LM4040BIX3-2.1Max SC70 2.048V 0.2% shunt V refABL MAX6411BS46-T Max UCSP-4 Volt. Detect. (4.640 V/OpenDrain,Active-Low)ABL LM4040CIX3-2.1Max SC70 2.048V 0.5% shunt V refABM LM4040DIX3-2.1Max SC70 2.048V 1% shunt V refABN LM4040AIX3-2.5Max SC70 2.5001% shunt V refABO LM4040BIX3-2.5Max SC70 2.500V 0.2% shunt V refABP LM4040CIX3-2.5Max SC70 2.500V 0.5% shunt V refABQLM4040DIX3-2.5Max SC70 2.500V 1% shunt V ref ABRLM4040AIX3-3.Max SC70 3.000V 0.1% shunt V refABS LM4040BIX3-3.Max SC70 3.000V 0.2% shunt V refABT LM4040CIX3-3.Max SC70 3.000V 0.5% shunt V refABU LM4040DIX3-3.Max SC70 3.000V 1% shunt V refABV LM4040AIX3-4.1Max SC70 4.096V 0.1% shunt V refABW LM4040BIX3-4.1Max SC70 4.096V 0.2% shunt V refABX LM4040CIX3-4.1Max SC70 4.096V 0.5% shunt V refABY LM4040DIX3-4.1Max SC70 4.096V 1% shunt V refABZ LM4040AIX3-5.Max SC70 5.000V 0.1% shunt V refAC BCX51-100 Sie SOT89 45V pnp audio hfe 100。
Sennheiser SR IEM G4 半机械式立体音频传输器说明书
FEATURES• Half-rack stereo transmitter in a full-metal housing with OLED display for full control• Easy and flexible wireless synchronization between transmitter and receiver via infrared• Compatible with Sennheiser WSM control software for flexible frequency allocation• Up to 16 compatible channels• Up to 42 MHz bandwidth with 1680 selectable frequen-cies, fully tunable in a stable UHF range• Transmission Range: up to 100 meters / 300 feet• High RF output power (up to 50 mW) depending on country regulations DELIVERY INCLUDES• SR IEM G4 stereo transmitter • rod antenna• power supply• GA 3 rackmount set• quick guide• safety guide• manufacturer declaration sheetHalf-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.PRODUCT VARIANTSMade in GermanySR IEM G4-A1470 - 516 MHz Art. no. 507842 SR IEM G4-A516 - 558 MHz Art. no. 507843 SR IEM G4-GB606 - 648 MHz Art. no. 507844 SR IEM G4-G566 - 608 MHz Art. no. 507845 SR IEM G4-B626 - 668 MHz Art. no. 507846 SR IEM G4-C734 - 776 MHz Art. no. 507847 SR IEM G4-E823 - 865 MHz Art. no. 507848Assembled in USASR IEM G4-A1470 - 516 MHz Art. no. 508181 SR IEM G4-A516 - 558 MHz Art. no. 508182 SR IEM G4-AS520 - 558 MHz Art. no. 508183 SR IEM G4-G566 - 608 MHz Art. no. 508184 SR IEM G4-B626 - 668 MHz Art. no. 508185 SR IEM G4-C734 - 776 MHz Art. no. 508186 SR IEM G4-D780 - 822 MHz Art. no. 508187SPECIFICATIONSRF characteristicsModulation Wideband FM stereo(MPX pilot tone) Frequency ranges A1: 470 - 516 MHzA: 516 - 558 MHzAS: 520 - 558 MHzG: 566 - 608 MHzGB: 606 - 648 MHzB: 626 - 668 MHzC: 734 - 776 MHzD: 780 - 822 MHzE: 823 - 865 MHz Transmitting frequencies Max. 1680 frequencies,adjustable in 25 kHz steps20 frequency banks, eachwith up to 16 factory-presetchannels, no intermodula-tion6 frequency banks withup to 16 programmablechannelsSwitching bandwidth up to 42 MHzNominal/peak deviation±24 kHz / ±48 kHzMPX pilot tone(frequency/deviation)19 kHz/±5 kHz Frequency stability±10 ppmAntenna output BNC socket, 50 ΩRF output power at 50 Ωswitchable:Low: typ. 10 mWStandard: typ. 30 mWHigh: typ. 50 mWAF characteristicsCompander system Sennheiser HDXAF frequency response25 Hz to 15 kHzAF inputBAL AF IN L (I) + MONO/BAL AF IN R (II)2x XLR-3/¼" (6.3 mm) jackcombo socket, electroni-cally balancedMax. input level+22 dBuTotal harmonic distortion(THD)<0.9 %Signal-to-noise ratio (atnominal load and peakdeviation)>90 dBAF outputLOOP OUT BAL L (I)/LOOP OUT BAL R (II)¼" (6.3 mm) stereo jacksocket,balancedOverall deviceTemperature range-10 °C to +55 °CPower supply12 V DCCurrent consumption max. 350 mA Dimensions Approx. 202 x 212 x 43 mm Weight Approx. 980 gCONNECTIONSDIMENSIONSARCHITECT‘S SPECIFICATIONThe wireless stereo rack-mount transmitter shall be for use with a companion receiver as part of a wireless RF monitoring system.The transmitter shall operate within nine UHF frequency ranges, with a switching bandwidth of up to 42 MHz: 470 –516 M Hz, 516 – 558 M Hz, 520 – 558 M Hz, 626 – 668 M Hz, 734 – 776 M Hz, 780 – 822 M Hz, 823 – 865 M Hz, 566 – 608 MHz, 606 – 648 M Hz; transmitting frequencies shall be 1,680 per range and hall be tunable in 25 kHz steps. The transmitter shall feature 20 fixed frequency banks with up to 16 compatible frequency presets and 6 user banks with up to 16 user programmable frequencies.The transmitter shall be menu-driven with a backlit OLED display showing the current frequency, frequency bank and channel number, metering of AF level, transmission status, transmission power, equalizer setting, input sensitivity, and lock status. An auto-lock feature shall be provided to prevent settings from being accidentally altered.The parameters of associated receivers shall be configurable in the transmitter menu and synchronized with the receivers via an integrated infrared interface.Frequency stability shall be ±10 ppm. RF output power at 50 Ω shall be switchable between 10 mW (low), 30 mW (stan-dard) and 50 mW (high).The stereo audio input shall utilize two discrete (left/right) electronically balanced ¼" (6.3 mm) jack/XLR-3F combo sockets; the audio output shall utilize a balanced ¼" (6.3 mm) jack socket; an audio loop output shall be provided utilizing two balanced ¼" (6.3 mm) jack sockets. A headphone output with headphone volume control shall be provided and shall utilize a ¼" (6.3 mm) stereo jack socket. The transmitter shall have an Ethernet port (RJ-45) for remote network-based monitoring and control using the Sennheiser Wireless System Manager software. One 50 Ω BNC-type input socket shall be provided for connecting the antenna.Nominal/peak deviation shall be ±24 kHz/±48 kHz. The transmitter shall incorporate the Sennheiser HDX compander system and shall include a 19-kHz MPX pilot tone with a ±5 kHz deviation. The audio frequency response shall range from 25 –15,000 Hz. Maximum input level shall be +22 dBu. Total harmonic distortion (THD) at 1 mV and nominal deviation shall be < 0.9 %. Signal-to-noise ratio at nominal load and peak deviation shall be > 90 dB.The transmitter shall operate on 12 V power supplied from the NT 2-3 mains unit (for 100 – 240 V AC, 50/60 Hz). Power consumption shall be 350 mA. The transmitter shall have a rugged metal housing; dimensions shall be approximately 202 x 212 x 43 mm (7.95" x 8.35" x 1.69"). Weight shall be approximately 980 grams (2.16 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131 °F).The transmitter shall be the Sennheiser SR IEM G4.Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · 。
iphone6电路图原理图
CRITICAL BOM OPTIONPART#DESCRIPTION QTY REFERENCE DESIGNATOR(S)PART NUMBER ALTERNATE FOR PART NUMBER BOM OPTION REF DES COMMENTS:CRITICAL BOM OPTIONPART#DESCRIPTIONQTY REFERENCE DESIGNATOR(S)PART NUMBER ALTERNATE FOR PART NUMBER BOM OPTION REF DES COMMENTS:Apple Inc.1. ALL RESISTANCE VALUES ARE IN OHMS, 0.1 WATT +/- 5%.BDRAWING NUMBERSIZEDDATEDACACDBAPPDCK 3. ALL CRYSTALS & OSCILLATOR VALUES ARE IN HERTZ.2. ALL CAPACITANCE VALUES ARE IN MICROFARADS.DRAWING TITLEDESCRIPTION OF REVISIONREVECNREVISION CRITICAL BOM OPTIONPART#DESCRIPTIONQTY REFERENCE DESIGNATOR(S)N61 BOM CALLOUTSALTERNATE NAND BOM OPTIONSN61 CARRIER BUILDSCH 051-9903MCO 056-6825BRD 820-3486NAND BOM OPTIONSSHIELD BOM OPTIONSBOM 639-4237 (16GB,BETTER)BOM 639-5838 (32GB,BEST)BOM 639-5839 (64GB,ULTRA)BOM 639-00210 (64GB,ULTRA,DTD)BOM 639-00209 (32GB,BEST,DTD)BOM 639-00208 (16GB,BETTER,DTD)ALTERNATE BOM OPTIONSThu Apr 17 17:11:44 2014SCHEM,MLB,N61051-99032014-04-1800027272417ENGINEERING RELEASED7.0.0EEEE FOR 639-00210 64GB EEEE_FQJY EEEE_64G_TDDLTECRITICAL 825-68381EEEE FOR 639-00209 32GB EEEE_FQK0EEEE_32G_TDDLTECRITICAL 825-68381825-6838EEEE FOR 639-00025 128GB EEEE_G16N EEEE_128GCRITICAL 1PCB PCBF, MLB, N61820-34861?CRITICAL EEEE_G16T 825-6838EEEE_16GEEEE FOR 639-4237 16GB CRITICAL 1EEEE_G16R CRITICAL EEEE_32GEEEE FOR 639-5838 32GB 1825-6838EEEE_G16Q EEEE_64G825-6838EEEE FOR 639-5839 64GB 1CRITICAL 825-6838EEEE_F98F EEEE FOR 639-00208 16GB EEEE_16G_TDDLTE1CRITICAL EEEE FOR 639-00212 128GBEEEE_FY9W825-68381CRITICALEEEE_128G_TLC_TDDLTESCH, MLB, N61051-99031CRITICAL ?SCH POWER:ADI(1/2)N56_MLB 121208/29/201308/26/2013N61_MLB 1010AUDIO:L67 CODEC (2/2)AUDIO:L67 CODEC (1/2)N61_MLB 08/26/201399IO:BUTTON FLEX CONN N61_MLB 08/26/201388ALTERNATE 338S00017338S00028U2203CARBON, BOSCH, BMI162BC335S00013U0301335S0894ST 8K EEPROMALTERNATE155S0610FL1802,FL1803ALTERNATE 155S0885155S00011CMC,90OHM,MURATAL1135ALTERNATE 155S00008338S00029CARBON, ST, AP6DS2AAU2203338S00017ALTERNATE ALTERNATE 155S0773155S0453TY 120OHM FERRITEFIJI, B1, E339S00006ALTERNATE 339S0246U0201339S00008FIJI, B1, S339S0246ALTERNATE U0201CUMULUS C1, FAB4343S0688343S0638U2401ALTERNATE 15UF,0402,HRTZL CAP138S00005ALTERNATE 138S00003C1290377S0168ALTERNATE 377S0140DZ1113118S0764118S0717R1309ALTERNATE 3.92KOHM, 01005FIJI, B1, H339S0246339S00007U0201ALTERNATE 197S0369197S0399ALTERNATE Y1200NDK ALT XTAL152S2033152S2034ALTERNATE 1.2MM 1.0UH, CYNTECN61_RADIO_MLB 03/24/20143534BASEBAND (1 OF 2)03/24/2014N61_RADIO_MLB 3635MOBILE DATA MODEM (2 OF 2)N61_RADIO_MLB 03/24/20144241VERY LOW BAND PAD ANTENNA SWITCH N61_RADIO_MLB 03/24/20144645N61_RADIO_MLB 03/24/20145049GPSWIFI/BT: MODULE AND FRONT END N61_RADIO_MLB 03/24/20145251N61_RADIO_MLB03/24/20145554JUMPERSOC:CAM,LCD,LPDP,PCIE N56_MLB 08/29/20137766SOC:NANDN56_MLB 08/29/2013N56_MLB 08/29/201322SOC:MAIN CONTENTSPDF PAGEN61_RADIO_MLB 03/24/20144746HIGH BAND SWITCH N61_MLB 08/26/20131818IO:DOCK FLEX CONN 08/26/20132020DISPLAY:FLEX CONN N61_MLB 08/26/2013N61_MLB 2121SENSORS:MESA FLEX CONNN61_MLB 08/26/20131717IO:TRISTAR2N61_MLB 2323CAMERA:REAR FLEX CONN 08/26/2013N56_MLB 08/29/201333SOC:I/OS152S1836ALTERNATE L1604152S1844TY ALT INDUCTOR152S1842L1519ALTERNATE 152S1849TY ALT INDUCTOR197S0369197S0392Y1200ALTERNATE ESPON ALT XTAL338S1202ALTERNATE 338S1285U1601L21 SPKAMP152S2049152S00004ALTERNATE 1.2MM 0.47UH, CYNTECFIJI, B0, SAMSUNGU0201339S0246339S00005ALTERNATE FIJI, B0, HYNIXU0201ALTERNATE 339S0246339S0247ALTERNATE 138S0648138S0652C1018138S0702C1106138S0657ALTERNATE NAND_64GU0604CRITICAL NAND,19NM,64GX8,MLC,PPN1.5335S09941NAND_16GNAND,19NM,16GX8,MLC,PPN1.5U0604CRITICAL 335S09981N61_MLB 08/26/201311CAMERA:FRONT FLEX CONN 11NAND_32GNAND,19NM,32GX8,MLC,PPN1.51CRITICAL U0604335S0993N61_RADIO_MLB 03/24/20143231BASEBAND PMU (1 0F 2)03/24/2014N61_RADIO_MLB 3130AP INTERFACE & DEBUG CONNECTORS 03/24/2014N61_RADIO_MLB 3837RF TRANSCEIVER (2 OF 3)N61_RADIO_MLB 03/24/20143736RF TRANSCEIVER (1 0F 3)LOW BAND PAD N61_RADIO_MLB 03/24/20144342N61_RADIO_MLB 03/24/20143332BASEBAND PMU (2 OF 2)N56_MLB 1313POWER:ADI(2/2)08/29/2013SOC:VDDCA,VDD1/2,VDD,VDD_CPU,VDD_GPU N56_MLB 4408/29/2013N61_RADIO_MLB 03/24/20143433BASEBAND (1 OF 2)03/24/2014N61_RADIO_MLB 3938RF TRANSCEIVER (3 OF 3)N61_RADIO_MLB 03/24/201441402G PAQFE DCDC N61_RADIO_MLB 03/24/20144039HIGH BAND PAD N61_RADIO_MLB 03/24/20144445N61_RADIO_MLB 03/24/20145453JUMPER N61_MLB SENSORS:COMPASS 191908/26/2013N61_MLB 08/26/20132222SENSORS:OSCAR,CARBON,PHOS,MAGNESIUM 1335S00010NAND,19NM,128GX8,TLC,PPN1.5U0604CRITICAL NAND_128GPOWER:TIGRISR,VIBE DRIVERN61_MLB 08/21/20131414335S1040ALTERNATE U0604335S0994HYNIX,NAND,64GB08/26/2013AUDIO:SPKR AMP,STROBE 1616N61_MLB DISPLAY:CHESTNUT,BACKLIGHT DRIVER N61_MLB 08/26/20131515TOSHIBA,NAND128GB335S00010ALTERNATE 335S00015U0604335S0992U0604335S0998TOSHIBA,NAND,16GBALTERNATE ALTERNATE 335S0998335S1038U0604HYNIX,NAND,16GB335S00014TOSHIBA,NAND,64GBU0604ALTERNATE335S0994N/A N/A2424TOUCH:CUMULUS,MESONN61_MLB 08/26/20132525POWER:BATT CONN,TPS,PD FEATURES N56_MLB 2626SYSTEM:VOLTAGE PROPERTIES 09/10/201309/10/2013N56_MLB 2727SYSTEM:N61 SPECIFIC 09/10/2013N56_MLB2828BLANK3029CELL:ALIASES138S0867C0610,C0611,C0614,C0634CRITICAL 1NAND_16GCAP,X5R,10UF,20%,6.3V,0.65MM,HRTZ,0402NAND_32G & NAND_64G138S08671CRITICAL CAP,X5R,10UF,20%,6.3V,0.65MM,HRTZ,0402NAND_128GCRITICAL1138S00003CAP,X5R,15UF,20%,6.3V,0.65MM,HRTZ,0402604-00244CRITICALSH2506SUBASSY, SA SHIELD, N611COMMONSANDISK,NAND,64GB,TLC335S0994335S00009U0604ALTERNATESOC:GND,VDDIO18,VDDIOD,VDD_VAR_SOC 55N56_MLB 08/29/2013SUBASSY, SHIELD, LOWER FRONT, N61604-00242COMMON1SH2502CRITICAL 604-00241COMMON CRITICAL SUBASSY, SHIELD, UPPER FRONT, N611SH2501COMMON SUBASSY, SHIELD, LOWER BACK, N611CRITICAL 604-00243SH2504N61_RADIO_MLB 03/24/20145352N61_RADIO_MLB 03/24/20145150ANTENNA FEEDSN61_RADIO_MLB 03/24/20144948GPS N61_RADIO_MLB 03/24/20144847RX DIVERSITY 03/24/2014N61_RADIO_MLB 4443MID BAND PADApple Inc.BDCBANOTICE OF PROPRIETARY PROPERTY:DACPAGE TITLEDSIZEDRAWING NUMBERREVISION BRANCH PP_MIPIOD_VREGBOARD_ID0PP1V8_PLLVOLTAGE PROPERTIESI1I10I100I101I103I104I105I106I107I108I109I11I110I111I112I113I114I115I116I117I118I119I12I120I121I122I123I124I125I126I127I128I129I13I130I131I132I133I134I135I136I137I138I140I141I143I147I148I149I150I151I152I153I154I155I16I17I2I20I21I23I24I25I26I27I28I29I30I33I34I35I37I38I4I40I41I42I43I44I46I47I48I5I50I51I52I53I54I55I56I57I58I59I60I61I64I65I66I67I68I69I7I70I71I72I73I74I75I76I77I78I79I8I80I81I82I83I85I86I87I88I89I90I91I92I93I96I97I98I99SYSTEM:VOLTAGE PROPERTIESPP_VCC_MAIN VOLTAGE=4.6V PP3V0_NAND VOLTAGE=3.0V VOLTAGE=3.0V PP3V0_TRISTAR PP3V0_IMU VOLTAGE=3.0V PP_CODEC_VCPFILT-VOLTAGE=2.5V VOLTAGE=3.0V PP2V85_FCAM_AVDD_CONN PP_BUCK4_LX VOLTAGE=4.6V PP_BUCK2_LX VOLTAGE=4.6V CHARGER_LDO VOLTAGE=5.0V CHG_BOOT VOLTAGE=4.6V VOLTAGE=0.2V PP_LCM_BL_CAT1PP1V2_OSCARVOLTAGE=1.2V PP_BATT_VCC VOLTAGE=4.6V PP1V8_MESA_CONN VOLTAGE=1.8V PP3V0_PROX_CONNVOLTAGE=3.0VPP0V95_FIXED_SOC VOLTAGE=1.0V PP_PMU_VDD_REF VOLTAGE=2.5VVOLTAGE=1.0V PP_BUCK5_LX1PN_SAGE_TO_TOUCH_VCPL VOLTAGE=-12V VOLTAGE=13.5V PP_SAGE_TO_TOUCH_VCPH VOLTAGE=-12V PN_SAGE_TO_TOUCH_VCPL_CONN VOLTAGE=1.8V PP_CUMULUS_VDDCORE VOLTAGE=13.5V PP_SAGE_TO_TOUCH_VCPH_CONN PP_SAGE_LX VOLTAGE=5.7V VOLTAGE=1.8V PP1V8_XTAL VOLTAGE=5.0V PP_TRISTAR_PINPP1V8_MESAVOLTAGE=1.8VVOLTAGE=22.0V PP_LCM_BL_ANODE_CONN PP1V8_LCM_CONNVOLTAGE=1.8V VOLTAGE=4.6V PP_E75_TO_TRISTAR_ACC2_CONN VOLTAGE=1.8V PP1V8_GRAPE PP3V3_ACC VOLTAGE=3.0V VOLTAGE=5.0V PP_LED_BOOST_OUT VOLTAGE=2.9VPP2V9_LDO9PP_CODEC_TO_MIC1_BIAS_CONN VOLTAGE=1.8V PP_CODEC_FILT+VOLTAGE=1.8V PP_CODEC_TO_REARMIC2_BIAS VOLTAGE=1.8VVOLTAGE=1.8VPP1V8_RCAM_CONNPP2V85_CAM_VDD VOLTAGE=3.0V VOLTAGE=1.8V PP2V85_RCAM_AVDD_CONN VOLTAGE=1.2V PP_CUMULUS_VDDANA VOLTAGE=1.8V PP_EXTMIC_BIAS PP_TIGRIS_VBUS_DETVOLTAGE=5.0VVOLTAGE=1.2V PP1V2_PLL PP0V95_FIXED_SOC_PCIE VOLTAGE=1.0V VOLTAGE=5.0V PMID_CAP PP_VAR_SOCVOLTAGE=1.0VPP_STRB_DRIVER_TO_LED_COOLVOLTAGE=5.0VPP_STRB_DRIVER_TO_LED_WARM VOLTAGE=5.0V PP6V0_LCM_BOOSTVOLTAGE=6V VOLTAGE=-5.7V PN5V7_SAGE_AVDDN PP_LCM_BL_CAT1_CONN VOLTAGE=0.2V PP_E75_TO_TRISTAR_ACC1VOLTAGE=5.0V BOARD_ID2VOLTAGE=1.8V VOLTAGE=1.2VPP1V2_NAND_VDDIVOLTAGE=1.8V PP1V8VOLTAGE=1.8V PP1V8_SDRAM PP_GPU VOLTAGE=1.1VPP16V5_MESA_CONNVOLTAGE=16.5VPP_CPU VOLTAGE=1.1V VOLTAGE=3.0V PP3V0_MESA VOLTAGE=1.8V PP1V8_ALWAYS VOLTAGE=3.0V PP3V0_PROX_IRLED VOLTAGE=1.0V PP1V0PP5V7_LCM_AVDDH_CONNVOLTAGE=5.7VVOLTAGE=5.0V PP_LED_DRV_LX PN_SAGE_VBST_OUTL VOLTAGE=-14.0V PP1V2VOLTAGE=1.2V VOLTAGE=1.8V PP_PMU_VDD_RTC PP_SAGE_VBST_OUTH VOLTAGE=14V PP_PMU_VREF VOLTAGE=1.8V PN_SAGE_VCPL_FVOLTAGE=-12V PP3V0_PROX_ALS VOLTAGE=3.0V PP3V3_USB VOLTAGE=3.3V VOLTAGE=1.8V PP1V8_VA_L19_L67PP_CODEC_SPKR_VQ VOLTAGE=2.2V PP_CODEC_TO_MIC1_BIAS VOLTAGE=1.8V PP_EXTMIC_BIAS_IN VOLTAGE=1.8V PP_EXTMIC_BIAS_FILT VOLTAGE=1.8V PP_CODEC_TO_FRONTMIC3_BIAS VOLTAGE=1.8VPP_SPKAMP_LDO_FILT VOLTAGE=1.8V PP_SPKAMP_FILT VOLTAGE=1.8V PP_L19_VBOOST VOLTAGE=8.0V VOLTAGE=22.0V PP_WLED_LX PP5V7_LCM_AVDDH VOLTAGE=5.7V PP5V7_SAGE_AVDDH VOLTAGE=5.7V PP_CHESTNUT_CN VOLTAGE=6.0V PP_CHESTNUT_LXP VOLTAGE=6.0VPP_BUCK0_LX0VOLTAGE=4.6V PP_BUCK0_LX1VOLTAGE=4.6V VOLTAGE=4.6V PP_BUCK1_LX0VOLTAGE=4.6V PP_BUCK1_LX1VOLTAGE=3.0VPP3V0_ALS_CONN VOLTAGE=1.8V PP_CODEC_TO_FRONTMIC3_BIAS_CONN VOLTAGE=2.5V PP_CODEC_VHP_FLYP VOLTAGE=1.8V PP1V8_FCAM_CONN PP_CODEC_VHP_FLYN VOLTAGE=2.5V PP_CODEC_VCPFILT+VOLTAGE=2.5V VOLTAGE=3.0V PP3V0_MESA_CONN PP_LCM_BL_CAT2_CONN VOLTAGE=0.2V PP_LCM_BL_CAT2VOLTAGE=0.2V VOLTAGE=22.0V PP_LCM_BL_ANODE PP_E75_TO_TRISTAR_ACC1_CONN VOLTAGE=5.0V PP_EXTMIC_BIAS_FILT_IN VOLTAGE=1.8V VOLTAGE=1.8V PP1V8_OSCARVOLTAGE=1.2V PP1V2_SDRAM VOLTAGE=-5.7V PN5V7_LCM_AVDDN_CONN PP_E75_TO_TRISTAR_ACC2VOLTAGE=4.6V VOLTAGE=5.0V PP5V0_USB PP_BUCK0_LX3VOLTAGE=4.6V PP_BUCK5_LX0VOLTAGE=4.6V VOLTAGE=5.0V PP5V0_USB_TO_PMU PP1V2_RCAM_CONN VOLTAGE=1.2V PP_SAGE_LYVOLTAGE=17.0V PP5V1_GRAPE_VDDH VOLTAGE=5.1V P17V0_MOJAVE_LDOIN VOLTAGE=17.0V PP_CHESTNUT_CP VOLTAGE=6.0V VOLTAGE=4.6V PP_BUCK0_LX2PP_BUCK3_LX VOLTAGE=4.6V PP16V5_MESA VOLTAGE=16.5V PP_SPKAMP_SW VOLTAGE=8.0VVOLTAGE=1.2V PP1V2_FCAM_VDDIO_CONN PP18V0_MESA_SW VOLTAGE=18.0V CHG_LXVOLTAGE=4.6V VOLTAGE=0.2V PP_CODEC_VHP_FLYC PN_SAGE_TO_TOUCH_VCPL_FILT VOLTAGE=-12.0V VOLTAGE=3.0V VIBE_DRIVE_P VIBE_DRIVE_NVOLTAGE=3.0VPP_BB_VDD_2V7_CONNVOLTAGE=2.7VPP_RCAM_AF_CONN VOLTAGE=1.8V 051-99037.0.0Apple Inc.B DCBANOTICE OF PROPRIETARY PROPERTY:DAC PAGE TITLEDSIZEDRAWING NUMBERREVISION BRANCH BLANK051-99037.0.0。
Tie down 拉紧器 澳洲 AS 4380 -product requirement
Marking
critic al
S2
2
Physical and appearance check
1 critic al critic al critic S2
Sewing shall be done by a lock-stich or similar machine and the stitching shall be evenly embedded into both surfaces of the webbing joint. 2 Edges conacting with webing shall be rounded off. 3 Function, Assembly and Safety tests Load restraint webbing which shall not elongate by more than 12% when 50% of the mean breaking strengthwebbing of the 1 webbing All load-bearing components excluding the is applied. complete load restraint system shall show no indication of permanent deformation at 1.25 times of the lashing capacity(LC) and shall afterwards withstand a force of at Load-bearing least twice the lashing capacity(LC). 2 components Ability to The force required to release the tension in the webbing release under restraint system shall be equal or less than 500N. tention 3
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
邕宁区2009年固定资产投资建设项目计划表
附注：
1、此表每月30日由责任单位以书面形式报到城区发改局，由城区发改局汇总后上报城区政府，对不按进度完成的责任单位要说明理由，并提出下月如何 采取措施把缺口补上。
2、在报此表的同时，责任单位应督促项目业主按城区统计局的表式填报统计局。
3、城区督查组负责组织相关部门定期或不定期地对责任单位进行督查，并将督办的情况进行通报。
4、由城区固定资产投资办公室定期或不定期地出《邕宁固投简报》，每月至少出一期，通报固定资产投资的完成情况、先进典型、经验总结等。
5、原以邕发[2009]6号下发的《关于印发2009年南宁市邕宁区国民经济和社会发展工作目标责任分解表的通知》中“南宁市邕宁区2009年固定资产投资 任务分解表”。