2012-2016年 含醋酸纤维长丝≥85%色织机织物(HS54082320 )进出口分析报告
en12165-2016国际标准中文
EN xxx-2016国际标准中文一、概述EN xxx-2016是一项重要的国际标准，其内容涉及到许多难以理解的技术术语和概念。
本文旨在对该标准的主要内容进行解读和分析，帮助读者更好地理解和运用这一标准。
二、标准概况EN xxx-2016标准的全称是“EN xxx:2016 Copper and copper alloys - Seamless, round copper and copper alloy tubes for 本人r conditioning and refrigeration - Technical conditions”。
该标准规定了空调和制冷用途的无缝铜及铜合金管材的技术条件，包括材料、尺寸、允许偏差、化学成分、力学性能、表面质量、检验方法等方面的要求，适用于空调和制冷设备的制造和安装。
三、标准的重要性1. 对产品质量的保证EN xxx-2016标准对铜及铜合金管材的材料、尺寸、化学成分、力学性能等方面进行了严格的规定，这些规定可以有效保证产品的质量和性能稳定性。
通过遵循该标准，生产厂家可以生产出合格的管材产品，从而为用户提供更加可靠和安全的空调和制冷设备。
2. 促进国际贸易的发展EN xxx-2016标准是一项国际标准，其统一的技术要求可以促进不同国家和地区之间的贸易往来。
在国际贸易中，遵循同一套技术标准可以降低产品的技术壁垒，提高产品的竞争力，有利于扩大市场份额，增加企业的出口额。
3. 保障用户的权益EN xxx-2016标准对铜及铜合金管材的使用与安装也进行了规范，包括了合适的尺寸、允许偏差、表面质量等要求。
符合该标准的产品能够更好地满足用户的需求，保障用户的权益，避免因产品质量问题带来的损失。
四、标准的主要内容EN xxx-2016标准的内容主要包括以下几个方面：1.范围标准规定了适用于空调和制冷设备的铜及铜合金无缝管材的技术条件，包括了材料、尺寸、允许偏差、化学成分、力学性能、表面质量、检验方法等方面的要求。
2016 Civic型号商业信息说明书
Body Repair NewsJuly 2019Version 1 2016 Civic: Body Repair InformationAPPLIES TO2016 Civic Model SeriesDISCLAIMER : This publication contains a summary of body and vehicle technology that may affect collision and other body repairs. Always refer to the appropriate service information and body repair manual for complete repair information. A subscription may be purchased at .OVERVIEW OF BODY FEATURES•Next-Generation Advanced Compatibility Engineering™ (ACE™) body structure.•Body construction using extensive amounts of high-tensile-strength steel (HSS) and ultra-high-strength steel (UHSS - 980 MPa and higher).•Weight saving 1,500 MPa steel center pillar stiffener and rear frame with soft zones for crash performance on 4-door models.•Bolt-on resin composite lower front bulkhead assembly.•Introduction of the Honda Sensing™ suite of advanced safety and driver-assistive technologies, including Adaptive Cruise Control with Low-Speed Follow, Lane Keeping Assist System, Road Departure Mitigation, and Collision Mitigation Braking System™ with pedestrian sensing capability.BODY TECHNOLOGYBODY CONSTRUCTION AND HIGH-STRENGTH STEEL CONTENT (4-Door Models)•Steel parts are color-coded based on their tensile strength in megapascals (MPa).•High strength steel (HSS) is defined as any steel with a tensile strength of 340 MPa or higher.•Ultra-high-strength steel (UHSS) is defined as any steel with a tensile strength of 980 MPa or higher.•Steel repair and welding procedures vary depending on the tensile strength of the parts involved.NOTEThese illustrations are for general reference only. Some body parts are constructed from multiple layers of different tensile strength steels. Always refer to the body repair manual body construction section for specific steel tensile strength information.•High strength steel (HSS) is defined as any steel with a tensile strength of 340 MPa or higher.•Ultra-high-strength steel (UHSS) is defined as any steel with a tensile strength of 980 MPa or higher.•Steel repair and welding procedures vary depending on the tensile strength of the parts involved.NOTEThese illustrations are for general reference only. Some body parts are constructed from multiple layers of different tensile strength steels. Always refer to the body repair manual body construction section for specific steel tensile strength information.•High strength steel (HSS) is defined as any steel with a tensile strength of 340 MPa or higher.•Ultra-high-strength steel (UHSS) is defined as any steel with a tensile strength of 980 MPa or higher.•Steel repair and welding procedures vary depending on the tensile strength of the parts involved.NOTEThese illustrations are for general reference only. Some body parts are constructed from multiple layers of different tensile strength steels. Always refer to the body repair manual body construction section for specific steel tensile strength information.1,500 MPa (HOT STAMP) STEEL LOCATIONS1,500 MPa steel is stronger than ordinary steel, so it can help protect vehicle occupants while reducing overall vehicle weight to improve fuel efficiency.The numbered parts in the diagrams below are constructed of 1,500 MPa steel:1.Front Inner Upper Pillar2.Front Pillar Upper Stiffener3.Front Side Frame Extension4.Side Sill Reinforcement5.Roof Side Stiffener6.Roof Front Rail (4- and 5-Door only)7.Center Pillar Stiffener (4- and 5-Door only)8.Rear Frame (4-Door only)1,500 MPA STEEL REAR FRAME (4-DOOR MODELS)4-door models use weight-saving 1,500 MPa steel rear frame rails with soft zones for impact crush control.•If rear frame damage is suspected, measure the entire vehicle using a three-dimensional measuring system.•If the rear frame is damaged, replace the affected rear frame(s) as a complete assembly only.•The traditional replacement of only the rear portion of the frame (Rear Frame B) is not possible because the 1,500 MPa rear frame cannot be sectioned.•For further repair information, refer to Rear Floor/Rear Frame Replacement in the service information.RESIN COMPOSITE FRONT BULKHEADThis vehicle has a lower bulkhead assembly constructed of resin composite material.•The upper bulkhead frame is constructed of 270 MPa mild steel.•The front upper and lower bulkheads are only sold as a complete assembly.•The bulkhead design improves engine compartment access during factory assembly and service.•The cooling fans, radiator, A/C condenser, hood lock, outside air temperature sensor, and related piping/ components are attached to the front bulkhead.•The bulkhead is attached to the body with 20 bolts.• A damaged bulkhead must be replaced.•For more information, refer to Front Bulkhead Replacement in the service information.ACOUSTIC SEPARATOR LOCATIONSA combination of molded, extruded, and tape acoustic separators are applied in various body locations.•These are applied within the body pillars.•They are designed to block the noise paths into the cabin from hollow body cavities.•Repairs are similar to previous models using commercially available products.•Refer to the Replacement section of the service information for specific procedures.。
新能效标签指令EU8742012解读
“终端用户”指购买或准备购买灯具或照明设备的自然人。灯具 不用于商贸、手工制作或专业教学。
“最终所有者”指个人或经济实体对产品生命周期的使用阶段的 拥者，或任何代表这样的个人或经济实体的任何人或经济实体。
8
©2012 SGS
• 第98/11/EC号指令中Article 1(1)和(2)所提及的灯泡于 2013年9月1日前投放市场的应符合该指令规定要求；
• 2013年9月1日前，第98/11/EC号指令中Article 1(1)和(2) 所提及的灯泡符合本条例生产的，已投放市场销售或准备 进入市场销售、出租或分期付款销售的都被认为是符合第 98/11/EC号指令的要求。
SGS EEC
5
©2012 SGS
SGS EEC
四、引用到的条款
98/11/EC指令中Article 1(1)和(2)
Article 1(1)：适用的产品 • 直接由主电源供电的细丝灯，整体式紧凑型荧光灯和家用 的直管型，非整体式紧凑型荧光灯，即使它们按非家用的 销售。
Article 1(2)：排除在98/11/EC范围外的产品 • 光通量超过6500 lm的产品; • 输入功率小于4 W的产品 • 反射灯泡 • 销售或商用首推其他节能源的，如电池 • 非销售或商用首推可见光的 • 是其他产品的一部分，首要目的非照明用的。但如果灯泡 单独销售或单独销售则包含在指令范围内
Article 4 (1)(a-c)：
• 在销售、出租或分期付款销售产品的场所，若最终用户无法看到产品的实物展示，应提供 市场推广使用的、由供应商按照附件四的规定编制的信息资料；
• 任一型号产品的广告、报价或招标书中包含了能源或价格信息，则应包含该型号产品的能 效等级信息；
en50525标准tⅰ6和eⅰ8
en50525标准tⅰ6和eⅰ8EN 50525是一项电力电缆标准，其中TⅠ6和EⅠ8是该标准下的两个规范。
下面是关于EN 50525 TⅠ6和EⅠ8的相关参考内容（不少于500字）：EN 50525 TⅠ6:EN 50525 TⅠ6是一项规范，用于电力电缆制造商和供应商在生产和提供家庭和类似用途的电缆时的要求。
该规范涉及到电缆的结构、金属导体、绝缘材料、护套材料和其他特定要求。
- 结构: 标准规定了电缆的内部结构，包括导体、绝缘层、护套和填充物。
导体可以是铜或铝，其截面积和导体材料的选择必须符合相关的国际和欧洲标准。
绝缘层可以是PVC、PE或XLPE材料，具体要求将根据电缆的用途和环境条件而定。
护套材料可以是PVC、PE或低烟无卤材料，用于提供额外的机械保护和防火性能。
- 金属导体: 标准规定了电缆中金属导体的要求。
导体的截面积和材料应符合国际和欧洲的相关标准。
导体的电阻、弯曲半径和绝缘厚度也有明确的要求。
- 绝缘材料: 标准规定了电缆绝缘层的要求。
绝缘材料必须具有足够的绝缘性能，以防止电缆中的电流泄漏。
绝缘材料必须符合相关的国际和欧洲标准，并且必须能够承受预定的环境条件下的温度和湿度变化。
- 护套材料: 标准规定了电缆护套层的要求。
护套材料必须能够提供机械保护和防火性能。
护套材料的选择和厚度将取决于电缆的应用环境和特定要求。
EN 50525 EⅠ8:EN 50525 EⅠ8是一项电力电缆规范，用于工业和类似用途的低电压电缆，包括控制电缆和仪器电缆。
该规范涵盖了电缆的结构、导体、绝缘材料、电缆屏蔽、护套材料和其他相关要求。
- 结构: 标准规定了工业用低电压电缆的内部结构。
导体可以是铜或铝，其截面积和导体材料的选择必须符合相关的国际和欧洲标准。
电缆可能包含多芯、绞合或屏蔽等特殊结构，具体要求将根据电缆的用途和环境条件而定。
- 导体: 标准规定了低电压电缆中金属导体的要求。
导体的截面积和材料应符合国际和欧洲的相关标准。
hott s066 user 说明书
S066 User ManualWarning:This device is recommended to use in house. Don’t use this device in high temperature and poisonous environment. Don’t put this device into water to avoid damage. Inserted battery, and don’t put the device close to fire to avoid exploding. Don’t repair and change the device yourself avoid losing warranty. Don’t use for long time, especially in high volume, which will hurt your ear.Important safety notice1. Please read the User Guide.2. Please save the User Guide3. Please pay attention to the Warning4. Please use the device according to the User Guide5. Don’t use this device exceed the function definition.SpecificationSupport Bluetooth call, FM, time display.ode/Device name: HOTTBluetooth Version: BT5.0Range: 10m (Free space)Output power: 3WFrequency: 20Hz~20kHzSNR: ≥80dBBattery capacity: 3.7B 1000mAPlay time: >10H (Default volume)Charging time: 3~4hInserted MICIPX4 waterproofMicro USB interface Charging IN: DC 5V Packaging；Bluetooth kitMicro USB cable User GuideProduct DiagraMain function1. Press power key for 3s to power on or off.2. Short press can play/ pause. Disconnect Bluetooth in BT mode.3. Volume up/ Next4. Volume down/ Previous5. Answer/Reject/Dial call6. Screen display user interface7. Charging with USB cable, connect to DC 5V or PC.8. Blue LED on when working, Red LED on when charging.9. FM/M mode change, BT FM Time10．MIC wholeCharging can reset the device if work abnormally.Product operationA. Running stationPress the power button for 3 seconds, hear the warning tone, the blue led will flash, and it will be on if connected successfully.B. Power offPress the power button for 3 seconds, after hearing the warning tone, the device will power off.C. Bluetooth pairingIf not connected before, you need connect your loudspeaker box with the Bluetooth device according the program below.1. Power on, after hearing the wa rning tone, the box will be in pairing mode, and the blue led will flash.2. Activate your Bluetooth device, and search.3. Select the box name, which was searched by your Bluetooth device.Notice: If the box is being connected with other device, you need disconnect, and search again.4. The password is “0000” if need, and choose “OK”. The password would be different between different manufactures.5. If paired successfully, the blue led will be on all the time. Now,you can use your box to play music and call. When playing the music, the blue led will breath slow. When pause the music, the blue led will flash several seconds, the be on all the time. Notice:If connected with the box before, you need connect according to the instruction below.Activate Bluetooth function in your device, the loudspeaker box will connect with your device automatically and can hear the warning tone.Play music after Bluetooth connectingShort press to play and pause if playing.Long press to play next, and short press to volume up.Long press to play previous, and short press to volume down.Hands free call modeIf connected, you can press to answer the call, and press to hang up when talking. At the same time, music will stop automatically.Charging for the loudspeaker boxBattery inside, can connect the USB cable to PC to charge the box, or connect the USB cable to DC 5V adaptor. When charging, the red led will be on. If charging finished, the red led will be off. Please remove the cable.The working time will depend on the volume level, the higher volume, the shorter time. You need re-charge the box if you didn’t use it for a long time. It’s recommended to charge the box once per month, so that can protect the battery better, and the battery will work for longer time.FM modeLong press into FM scan mode, and save automatically.Short press can play the channel saved.Long press to change the channel saved, long press to delete the channel.Long press/to modify frequency, short press can change volume.Time modePress change key into time mode, long press and type12h/24h system, press /to change.Short press to M/S mode and short press/to set time.Absorbed function when having a bathWhen having a bath, can listen to the music and answer the call, as the product can absorb the wall with the pedestal.Notice:Don’t dip the product into water, which will damage the product.CapacityBluetooth version: BT5.0, support profile: A2DP /HFP/AVRCPThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC ID: YB2-S602Question and instructionIf find some problem when using this product, you can solve according to the solution below.Trouble Trouble shooting SolutionCharge failure USB power charger (notincluded in this package) is not inserted into thewall socket or USBcable (included in thepackage) is not insertedinto the 2.0mm interfaceon the side of thespeakerInsert the chargerinto the wall socket orUSB cable into the2.0mm interface onthe side of thespeakerThe wall socket doesn'twork.Insert the device intoanother wall socket tomake sure theplayback failsThe USB port of thecomputer doesn't work.Make sure yourcomputer is turned onand try another USBport.There is no sound The battery in thespeaker is deadRechargePhone not connected.Read the "speakeractions" section toconnect speakers Volume is too low.Volume up yourproductCan’t connect with theproduct. Can’t pairCheck your Bluetoothdevice if supportA2DP profileSound source offOpen the soundsource/The Bluetooth is offOpen the Bluetooth inyour device Bluetooth isincompatibleUse different playdevicePoor quality/ interrupt The device exceeds therange10m in free space.Notice, all the information above only for your reference.S066中文参考说明书警告此设备只限于室内使用。
中华人民共和国国家标准公告2016年第8号
������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
GB/T 32614—2016 《户外运动服装 冲锋衣》 将于 2016 年 11 月 1 日开始实施。本标准规定了户外运动服装冲锋衣 的产品号型、 要求、 检验规则、 判定规则、 产品使用说明、 包装、 运输和贮存。本标准适用于鉴定以纺织面料为主生产的 冲锋衣的品质。本标准不适用于年龄在 36 个月及以下的婴幼儿冲锋衣。 标准中面料功能性对表面抗湿性、 静水压、 透湿率进行考核， 划分为 I 级和 II 级。标准要求应在吊牌中标注 I 级或
ห้องสมุดไป่ตู้
������������������������������������������������������������������������������������������������������������������������������������������������
GB/T 32614—2016 《户外运动服装 冲锋衣》 将于 2016 年 11 月 1 日开始实施
55
微标准
纺织检测与标准 （2016 No.3）
（续 表 6）
汽车零部件检测标准大全汇总
精品文档，放心下载，放心阅读汽车零部件检测标准大全汽车发动机离合器压燃式发动机排气污染物?ESC 稳态循环GB17691-2001车用压燃式发动机排气污染物试验排放限值及测试方法1?ELR 负荷烟度0324**GB17691-2005 车用压燃式、气体燃料点燃试验0512式发动机与汽车排气污染物排放限值及测试?ETC 瞬态循环方法试验ECE R49压燃式发动机排气污染物?OBD?耐久性压燃式发动机排气0324GB3847-2005车用压燃式发动机和压燃式发2动机汽车排气烟度排放限值及测量方法可见污染物0512ECE R24可见污染物3柴油机全负荷烟度0324DB11/046-1994 汽车柴油机全负荷烟度测量0512方法车用点燃式发动机GB14762-2002车用点燃式发动机及装用点燃4及装用点燃式发动0324式发动机汽车排气污染物排放限值及测量方机汽车排气污染物0512法GB/T17692-1999 汽车用发动机净功率测试方5发动机净功率0324法ECE R85发动机净功率80/1269/EEC 发动机净功率6发动机性能0324GB/T18297-2001 汽车发动机性能试验方法7发动机可靠性0324GB/T19055-2003 汽车发动机可靠性试验方法8发动机产品质量检0324QC/T901-1998 汽车发动机产品质量检验评定验评定试验方法9冷却系0324Q/QJX 004-2003 汽车发动机冷却系冷却能力试验方法QC/T630-1999 汽车排气消声器性能试验方法10排气消声器性能0324 QC/T631-1999 汽车排气消声器技术条件GB/T 4759-1995 内燃机排气消声器测量方法QC/T 25-2004 汽车干磨擦式离合器总成技术1技术要求0324 条件QCT27-2004 汽车干磨擦式离合器台架试验方变速箱1技术要求0324法精品文档，超值下载QC/T29063-1992 汽车机械式变速器总成技术条件QC/T568-1999 汽车机械式变速器台架试验方法QC/T513-1999 汽车前轴台架疲劳寿命试验方前轴1疲劳寿命0324 法制动器1效能2热衰退及恢复3衬片（块）磨损4管路失效及加力器失效5静效力6动效力7密封性8所需液量9强度10耐久性1总成静扭2桥壳垂直弯曲疲劳032403240324QC/T 483-1999 汽车前轴疲劳寿命限值QC/T 239-1997 货车、客车制动器性能要求QC/T479-1999 货车、客车制动器台架试验方法QC/T 564-1999 轿车制动器台架试验方法QC/T237-1997 汽车驻车制动器性能台架试验方法QC/T592-1999 轿车制动钳总成性能要求及台架试验方法QC/T316-1999 汽车行车制动器疲劳强度台架试验方法驱动桥传动轴半轴燃油箱3桥壳刚性4桥总成支承刚性5齿轮疲劳6噪声1静扭强度2扭转疲劳3临界转速1静扭强度2扭转疲劳1安全性能要求QC/T534-1999 汽车驱动桥台架试验评价指标0324 QC/T533-1999 汽车驱动桥台架试验方法日产柴试验规范0324 QC/T29082-1992 汽车传动轴总成技术条件0324 QC/T 294-1992 汽车半轴技术条件QC/T 293-1992 汽车半轴台架试验方法GB18296-2001汽车燃油箱安全性能要求和试 0324 验方法筒式减振器1技术条件0324QC/T644-2000 汽车金属燃油箱技术条件QC/T491-1999 汽车筒式减振器尺寸系列及技术条件真空助力器制动轮缸制动主缸液压感载比例阀QC/T545-1999 汽车筒式减振器台架试验方法QC/T546-1999 汽车筒式减振器清洁度限值及测定方法1一般要求QC/T 307-1999 真空助力器技术条件2基本性能03243可靠性1总成性能要求0324 QC/T 77-1993 汽车液压制动轮缸技术条件1性能要求0324 QC/T 311-1999 汽车液压制动主缸技术条件1性能要求0324 QC/T 593-1999 液压感载比例阀技术条件气压控制装置（制动系统阀类）后下部防护1技术要求03241后下部防护装置QC/T 36-1992 汽车与挂车气压控制装置通用技术条件QC/T 35-1992 汽车与挂车气压控制装置台架试验方法QC/T 37-1992 汽车与挂车气压调节保护装置通用技术条件QC/T 38-1992 汽车与挂车气压调节保护装置台架试验方法装置储气筒钢板弹簧具有后下部防护装0324 GB11567.2-2001 汽车和挂车后下部防护要求2置的车辆1技术要求及试验方0324QC/T200-1995 汽车气制动装置用储气筒技术法条件1性能要求0324 QC/T29035-1991 汽车钢板弹簧技术条件扭杆弹簧1性能要求0324 JISB 2705-87 扭杆弹簧操纵拉索1技术要求0324 QC/T29101-1992 汽车用操纵拉索总成取力器1一般技术要求0324QC/T 319-1999 自卸汽车取力器技术条件1一般要求气弹簧2力学性能3气密性能0324QC/T 207-1996 汽车用普通气弹簧4耐久性5耐腐蚀性6抗拉强度1环境测试轿车背门撑2支撑力测定3撑杆伸出速度0324B28 4160 轿车背门撑杆试验方法杆4拉伸阻力5疲劳试验1伸缩试验GB/T13061-1991 汽车悬架用空气弹簧橡胶橡胶气囊2弹簧特性气囊3垂直疲劳03241性能遮阳板2耐光性QC/T 629-1999 汽车遮阳板3寿命1密封性制动气室、2输出力特性3恢复性EQCT-159-1999汽车制动气室台架试验方法储能弹簧制4耐久性0324EQC-193-1999汽车制动气室技术条件5高温试验动气室总成6低温试验7耐压试验空气干燥器1技术要求0324CCAP/SB 538.1-2001产品技术要求转向机构1防止转向机构对驾0324GB11557—1998 防止汽车转向机构对驾驶员驶员的伤害0512伤害的规定安全带总成10324GB 14166 — 2003 机动车成年乘员用安全带性能及约束系统0512ECE R16安全带及约束系统座椅总成及白车身座椅头枕客车座椅白车身车门锁门铰链1座椅总成性能2座椅强度1性能要求1强度及安装要求1安全带固定点门锁纵向、横向半1.锁、全锁性能2.门锁纵向、横向动态门铰链纵向、横向性1.能缩颈后的内孔通过1量ECE R17座椅0324GB15083-1994 汽车座椅系统强度要求和试验0512 方法GB 11550—1995 汽车座椅头枕的性能要求和03240512试验方法ECE R25座椅头枕GB 13057-2003 客车座椅及其车辆0324ECE R80,客车座椅0512QC/T 633-2000 客车座椅0324 GB14167-1993汽车安全带安装固定点0512 ECE R14安全带安装固定点0324 GB15086-2004汽车门锁及车门保持件的性能要求和试验方法0512ECE R11门锁及门保持件GB15086-2004汽车门锁及车门保持件的性能0324 要求和试验方法0512ECE R11门锁及门保持件气压制动软管2气密性试验3长度变化率4爆裂强度5抗拉强度6粘附强度0324GB16897-1997制动软管7耐高温性8耐低温性05129耐机油性10耐水性11耐臭氧性尼龙软管的耐氯化12锌性13接头的耐腐蚀性液压制动软管真空制动软管后视镜性能纺织品橡胶制品缩颈后的内孔通过1量2最大膨胀量3爆裂强度4制动液相容性5挠曲疲劳6抗拉强度7吸水性8耐低温性9耐臭氧10接头耐腐蚀1缩颈后的内孔通过量2真空度3爆裂强度4弯曲试验5粘附强度6耐高温7耐低温8耐臭氧9耐汽油10变形要求11耐腐蚀1曲率半径2反射率3撞击性能4抗弯性能1色牢度2拉伸性能1拉伸性能2硬度3耐液体性4压缩永久变形03240512 GB16897-1997制动软管0324GB16897-1997制动软管05120324 GB15084-1994汽车后视镜的性能和安装要求0512 ECE R46后视镜GB3920-1997纺织品色牢度试验，耐磨擦色牢 0224 度0512 GB/T3923.1-1997 纺织品，织物拉伸第1 部分：断裂强力和断裂伸长率的规定条样法GB/T528-1998 硫化橡胶或泪塑料性橡胶拉伸0314 应力应变性能的测定0324 GB/T531-1999 橡胶袖珍硬度计压入硬度试验方法塑料制品汽车内饰材料汽车V 带汽车转向盘车辆用橡胶密封条5热空气老化1密度2力学性能3拉伸性能4压缩性能5热空气老化6冲击试验7状态调节8弯曲性能1燃烧时间2燃烧距离1拉伸强度2伸长率3耐高温4耐低温5疲劳寿命1外观2热性能3受力变形4表面硬度5耐溶剂6摩擦性能1硬度2拉伸性能3撕裂性能4压缩永久变形5脆性温度6热空气老化GB1690-1992硫化橡胶耐液体试验方法GB1683-1981硫化橡胶恒定形变压缩永久变形的测定方法GB3512-2001硫化橡胶或热塑性橡胶热空气加速老化和耐热试验GB 1033-1986 塑料密度和相对密度试验方法GB/T 1039-1992 塑料力学性能试验方法总则GB/T 1040-1992 塑料拉伸性能试验方法GB/T 1041-1992 塑料压缩性能试验方法GB/T 7141-1992 塑料热空气暴露试验方法0315GB/T 1043-1993 硬质塑料简支梁冲击试验方0324 法GB/T 1843-1996 塑料悬臂梁冲击试验方法GB/T 2918-1998 塑料试样状态调节和试验的标准环境GB 9341-2000 塑料弯曲性能试验方法0324 GB 8410－1994 汽车内饰材料的燃烧特性 95/28/EEC 内饰材料的燃烧特性GB12732/T-1996 汽车 V 带GB/T13352-1996 汽车 V 带尺寸0324 GB/T 3686-1998V 带拉伸强度和伸长率试验方法GB/T11545-1996 汽车 V 带疲劳试验方法0324 QC/T563－1999 汽车转向盘试验方法0324 QC/T639－2004 汽车用橡胶密封条7耐臭氧8污染性、耐候性汽车燃油箱1性能（塑料）车辆用植绒1耐磨损密封条1硬度2密度3拉伸性能车辆用塑料4断裂伸长5热空气老化密封条6冲击脆化温度7热稳定性8耐臭氧9污染性1功率2光通量3前照灯配光性能4气体放电光源前照灯配光性能5前雾灯配光性能6后雾灯配光性能汽车灯具7倒车灯配光性能转向信号灯配光性8能9回复反射器光度10后牌照板照明11前后位灯、制动灯、示廓灯配光性能12侧标志灯配光性能13驻车灯配光性能GB18296-2001 汽车燃油箱安全性能要求和试0324 验方法ECE R34防火0324 QC/T639－2004 汽车用橡胶密封条0324 QC/T641－2005 汽车用塑料密封条GB15766.1-2000 道路机动车辆灯丝灯泡尺寸、光电性能要求、 ECER37 、 IEC809-1992 GB 4599-1994 汽车前照灯配光性能ECER1关于批准发射非对称近光和 /或远光并装有 R2/或HS1类白炽灯的机动车前照的统一规定ECER5关于批准发射对称近光或远光或两者兼有的机动车封闭式前照灯（SB ）的统一规定0324 ECER8关于批准发射非对称近光或远光装有卤素灯 H1 、 H2 、H3 、 HB3 、HB4 、 HB 、H7 ）认可规定ECER20关于批准发身非对称近光或远光或两者兼有装有卤素灯（ H4 ）的机动车前照灯的统一规定ECER31关于批准发射非对称近光或远光或两者兼有的卤素封闭式（ HSB ）机动车前照灯的统一规定ECER11214三角警告牌光度15色温16耐候性17耐温性18耐振动性19耐冲击性20防尘性21防水性22防盐雾性汽车灯具23温变及劣化1声压级2性能3耐电压试验喇叭4温度变化试验5湿热6振动7盐雾ECER98关于批准装用气体放电光源的机动车前照灯的统一规定ECER99关于批准用于已通过认证的机动车的气体放电灯具的气体放电光源的统一规定GB 4660-1994 汽车前雾灯配光性能ECE R19前雾灯GB11554-1998汽车及挂车后雾灯配光性能ECE R38后雾灯GB15235-1994汽车倒车灯配光性能ECE R23、SAE J593 OCT95GB17509-1998汽车及挂车转向信号灯配光性能ECE R6、 SAE J588 DEC.94 、GB11564-1998、ECER3 、 76/757/EEC 、ECE R69 、ECE R70 、 ECER104GB18408-2001 汽车及挂车后牌照板照明装置配光性能GB5920-1999汽车及挂车前位灯、后位灯、示廓灯和制动配光性能ECE R7, SAE J222DEC.94 ， *SAE J586SEP95 ， SAE J585DEC.1994 、 ECE R91 、ECE R4GB18099-2000汽车及挂车侧标志灯配光性0324 能GB18409-2001汽车驻车灯配光性能GB 19151-2003 机动车用三角警告牌ECER77、CMVDR127 、 ECER27 、 GA184-1999GB 4785-1998 汽车及挂车外部照明和信号装置的安装规定GB/T10485-1989 汽车及挂车外部照明和信号装置基本环境试验ISO/DIS 12346 ：1997 照明和信号装置基本环境试验**GA 406-2002 车身反光标识GB15742-2001 机动车用喇叭性能要求和试验方法0324 ECE R28QC/T 30-2004 汽车用电喇叭技术条件QC/T 413-2002 汽车电器设备基本技术条件8耐久性车载接收机的无线电骚1骚扰电压0324扰GB18655-2002 用于保护车载接收机的无线电骚扰特性的限值和测量方法1低温2高温3湿热4盐雾5振动6转换力7耐电压8电压降9耐久性10操作力矩11触点通断12触点电压降13耐电压性能各种开关14温升性能15断电能力16插拔力17转换力矩18外观19档位20抗干扰特性21转换力22强度23绝缘电阻24过负载能力25片式插头插拔力26接线柱强度27安装部位强度QC/T 198-1995 汽车用开关通用技术条件QC/T 413-2002 汽车电器设备基本技术条件QC/T 427-1999 汽车用电源总开关技术条件QC/T218-1996 汽车用转向管柱上组合开关技术条件QC/T 504-1999 汽车用点火开关技术条件0324QC/T 505-1999 汽车用车灯开关技术条件QC/T 506-1999 汽车用仪表灯开关技术条件QC/T 632-2000 汽车用翘板式开关技术条件QC/T 219-1996 汽车用脚踏式变光开关QC/T 20-1992 汽车用气压式制动灯开关技术条件28互换性29外形及尺寸30气密性31超压性32抗温变1发电机性能汽车用交流2发电机耐久性3湿热试验发电机4盐雾试验5振动试验1钥匙转动力矩2钥匙强度3转向锁强度汽车用带点4点火开关接线柱强度火开关的转5绝缘电阻6触点电压降向锁7触点温升8耐温性9耐盐雾10振动试验11耐久性车用电线束1耐久性2插拔力插接器、接线3电压降4振动盒5低温试验6高温试验1尺寸2电线与端子及接点汽车用低压拉力3电压降电线束4低温试验5高温试验6湿热QC/T 729-2005 汽车用交流发电机技术条件0324QC/T 413-2002 汽车电器设备基本技术条件QC/T 628-1999 汽车用带点火开关的转向锁0324QC/T 413-2002 汽车电器设备基本技术条件0324 QC/T 417-2001 车用电线束插接器**QC/T707-2004 车用中央电气接线盒QC/T29106-2004 汽车用低压电线束技术条0324 件QC/T 413-2002 汽车电器设备基本技术条件7盐雾8振动1电压降2低温试验汽车用熔断3高温试验4湿热器5振动6负载性能7电流周期耐久性8加速老化试验1低温试验2高温试验汽车用点烟3耐振动4产品消耗功率器5绝缘介电强度6插拔力7产品接线柱强度8耐久性1基本性能汽车用蜂鸣2电压变化3绝缘电阻器4耐振性5耐温性6耐久性1声压级2电压波动3耐高温性车用电子警4耐振动性5耐湿热性报器6耐低温性7抗雨淋性8耐粉尘适应性9连续运行能力汽车倒车报1基本性能0324 QC/T 420-2004 汽车用熔断器QC/T 413-2002 汽车电器设备基本技术条件0324 QC/T 415-1999 汽车用点烟器技术条件0324 QC/T 550-1999 汽车用蜂鸣器0324 GB 8108-1999 车用电子报警器0324 QC/T 549-1999 汽车倒车报警器2电压变化警器起动特性34绝缘电阻5耐振性6耐温性7耐潮性8防溅性9频谱特性10耐久性1电压降2绝缘强度3超负荷性4耐振动性汽车信号闪耐撞击性56耐潮性光器7耐温性8耐久性9耐振动性10耐冲击性1分电器性能分电器分电器寿命21起动机性能起动机起动机寿命21性能0324 QC/T 501-1999 汽车信号闪光器技术条件0324 QC/T 19-1992 汽车用分电器技术条件QC/T731-2005 汽车用起动机技术条件0324QC/T 277-1999 起动机特性试验方法QC/T29090-1992 汽车用刮水电动机技术条电动刮水器寿命21性能0324件QC/T 44-1997 汽车风窗玻璃电动刮水器技术条件GB15085-1994汽车风窗玻璃刮水器、洗涤器洗涤器寿命21性能继电器寿命2的性能要求及试验方法QC/T548-1999 汽车用洗涤电动机技术条件0324QC/T413-2002 汽车电器设备基本技术条件QC/T246-1997 汽车风窗玻璃电动洗涤器技术条件QC/T 419-1999 喇叭继电器技术条件0324 **QC/T695-2002 汽车通用继电器 QC/T413-2002 汽车电器设备基本技术条件1性能点火线圈寿命2玻璃升降器1性能、寿命汽车电动门1性能、寿命锁1额定容量2大电流放电3低温放电4过放电5密封反应效率6荷电保持能力蓄电池7循环寿命8耐振性9综合性能10极性11安全性12水损耗13外观14尺寸及重量汽车仪表1性能农用运输车1噪声2照明与信号装置3制动4转向5操纵件指示器6灯具7座椅8喇叭9车速表QC/T 16-1992 点火线圈通用技术条件0324QC/T 416-1999 点火系统的测试方法0243 QC/T 636-2000 电动汽车玻璃升降器 QC/T 626-1999 汽车玻璃升降器0324 QC/T 627-1999 汽车电动门锁装置GB/T5008.1-2005 起动用铅酸蓄电池技术条件GB/T5008.2-2005 起动用铅酸蓄电池产品品种和规格**GB/T18332.1-2001 电动道路车辆用铅酸蓄电池0324 **GB/T18332.2-2001 电动道路车辆用金属氢化物镍蓄电池**GB/Z18333.1-2001 电动道路车辆用锂离子蓄电池**GB/Z18333.2-2001电动道路车辆用锌空气蓄电池GB/T19056-2003 汽车行驶记录仪0324 QC/T727-2004 汽车、摩托车用仪表GB/T19118-2000 农用运输车噪声测量方法GB/T19119-2003 农用运输车照明与信号装置的安装规定GB/T19120-2003 农用运输车制动系统结构、0348 性能和试验方法GB/T 19121-200 农用运输车转向系GB/T19122-2003 农用运输车操纵件、指示器及信号装置的符号GB/T19123-2003 农用运输车转向信号灯配光性能10号牌板11外廓12侧倾13后视镜14自由加速烟度1动力性摩托车2燃油消耗量3噪声GB/T19124-2003 农用运输车前照灯GB/T19125-2003 农用运输车前位灯、后位灯和制动灯配光性能GB/T19135-2003 农用运输车倒车灯配光性能GB/T19126-2003 农用运输车座椅系统强度要求及试验方法GB/T19129-2003 农用运输车电喇叭性能要求及试验方法GB/T19130-2003 农用运输车车速表使用性能GB/T19131-2003 农用运输车号牌板（架）及其位置GB/T19132-2003 农用运输车外廓尺寸限值GB/T19133-2003 农用运输车最大侧倾稳定角试验方法GB/T19134-2003 农用运输车后视镜性能和安装要GB18322-2001 农用运输车自由加速烟度限值GB/T 5383-1994 摩托车和轻便摩托车最低稳定车速试验方法GB/T 5384-1994 摩托车和轻便摩托车最高车速试验方法GB/T 5385-1994 摩托车和轻便摩托车加速性能试验方法GB/T 5386-1994 摩托车和轻便摩托车滑行试验方法GB/T 5387-1994 摩托车和轻便摩托车爬坡能力试验方法CMVDR640关于摩托车和轻便摩托车最高车速0241 及发动机最大扭矩和最大净功率的设计规则0512 GB/T16486-1996 摩托车和轻便摩托车燃油消耗量试验方法GB16169-2005摩托车和轻便摩托车加速行驶噪声限值及测量方法GB4569-2005摩托车和轻便摩托车定置噪声限值及测试方法ECER41关于就噪声方面批准摩托车的统一规定ECER63关于就噪声方面批准轻便摩托车的统一规定78/1015/EEC 摩托车——噪声试验CMVDR 463关于轻便摩托噪声的设计规则CMVDR 409关于三轮机动车噪声的设计规则CMVDR 441关于摩托车噪声的设计规则93/14/EEC 二轮或三轮机动车辆的制动GB17355-1998摩托车和轻便摩托车制动性能指标限值GB/T5382.1—1996 摩托车和轻便摩托车制动4制动装置性能试验方法GB/T15364-1994 摩托车和轻便摩托车驻车性能试验方法ECER78关于就制动方面批准 L 类车辆的统一规定CMVDR178关于 L 类车辆制动的设计规则GB15365-1994摩托车操纵件、批示器及信号装置的图形符号5操作件 . 指示器 .ECER60关于就驾驶员操纵的控制件，含图形标志控制件的识别，信号装置和指示器方面批准二轮摩托车的规定93/29/EEC 控制件、信号装置和指示器的识别GB17353-1998摩托车和轻便摩托车转向锁止防盗装置6防盗ECER62关于就防盗方面批准带有操纵把的机动车的统一规定93/33/EEC 摩托车防盗装置7声响报警93/30/EEC 二轮或三轮机动车辆的声响报警装置摩托车GB17352-1998 摩托车和轻便摩托车后视镜及其安装要求8后视镜ECER46关于批准后视镜和就后视镜的安装方面批准机动车辆的统一规定ECER81关于就车把上后视镜安装方面批准后视镜及其带与不带边斗二轮机动车的规定9扶手93/32/EEC 摩托车乘客扶手10支架024193/31/EEC 摩托车支架051293/34/EEC 摩托车标记93/93/EEC 摩托车质量和尺寸93/94/EEC 摩托车后号牌板10一般要求97/24/EEC 摩托车轮胎安装要求、外部凸出物、后视镜、燃油箱、防改动措施、电磁兼容性要求、噪声要求、联接装置、安全带及安全带固定点、刮水器、洗涤器、除霜及除雾摩托车灯具1摩托车灯配光性能1强制性标准检验混合动力电整车性能23可靠性行驶试验动汽车和电4动力性能动汽车5轻型车能量消耗量6重型车能量消耗量7车辆结构要求8功能安全要求GB5948-1998摩托车白炽丝光源前照灯配光性能GB17510-1998摩托车光信号装置配光性能**GB19152-2003 轻便摩托车前照灯配光性能ECER50关于批准轻便摩托车、摩托车前后位置灯、转向信号灯和后牌照板照明装置的规定ECER53关于就灯光及光信号装置的安装方面批准 L2 类（摩托车）的统一规定ECER56关于批准轻便摩托车以及类似车辆前照灯的统一规定ECER57关于批准摩托车以及类似车辆前照灯的统一规定0241ECER65关于批准摩托车特别警告灯的统一规定ECER72关于批准发射非对称近光或远光并装有卤素灯（ HS 灯）的摩托车前大灯的统一规定93/92/EEC 摩托车照明和信号装置的安装要求ECER74关于就灯光和光信号装置方面批准轻便摩托车的统一规定ECER76关于批准发射远光和近光的轻便摩托车前照灯的统一规定ECER82关于批准装有白炽卤素灯（ HS2 ）的轻便摩托车前照灯的统一规定93/92/EEC 两轮、三轮机动车辆灯光和光信号装置的安装**GB/T19750-2005 混合动力电动汽车定型试验规程**GB/T19752-2005 混合动力电动汽车动力性能试验方法0324 **GB/T19753-2005 轻型混合动力电动汽车能量消耗量试验方法**GB/T19754-2005 重型混合动力电动汽车能量消耗量试验方法**GB/T19751-2005 混合动力电动汽车安全要求混合动力电动汽车和电动汽车9故障防护10标记11蓄电池排出气体动力蓄电池 12.1 绝缘电阻**GB/T18384.1-2001电动汽车安全要求第1212.2 爬电距离一部分：车载储能单元12.3 通风动力蓄电池过点断13开器14车载储能装置碰撞的特殊要求15操作安全要求**GB/T18384.2-2001 电动汽车安全要求第16故障防护要求二部分：功能安全和故障防护触电防护17.1绝缘电阻1717.2 耐压**GB/T18384.3-2001 电动汽车安全要求第17.3电位平衡三部分：人员触电防护18防水19轻型车污染物排放**GB/T19755-2005 轻型混合动力电动汽车污染物排放测量电机及控制器20.1 电机空载转速20.2冷态电阻20.3匝间绝缘20.4机械强度0324 **GB/T 18488.1 － 2001 电动汽车用电机及其2020.5绝缘电阻控制器技术条件20.6耐电压**GB/T18488..2-2001 电动汽车用电机及其20.7过载保护控制器试验方法20.8 振动20.9环境试验20.10转速试验20.11 耐久。
12ss508
12ss508IntroductionThe SS508 is a versatile and high-performance device that is designed to meet the needs of modern technology users. This document will provide an overview of the key features and specifications of the SS508, as well as instructions on how to set up and use the device.FeaturesThe SS508 offers a range of features that make it an ideal choice for both personal and professional use. Some of the key features include:1.Powerful Performance: The SS508 is powered by a high-performance processor, which ensures smooth and efficient multitasking.Whether you are browsing the web, editing documents, or running resource-intensive applications, the SS508 can handle it all with ease.2.Ample Storage: With a spacious internal storage capacity, the SS508provides ample space for storing all your important files, documents, andmedia. Additionally, it also supports expandable storage options, allowing you to further increase the storage capacity as per your needs.3.High-Resolution Display: The SS508 features a vibrant and high-resolution display that delivers crisp and clear visuals. Whether you arewatching videos, playing games, or working on graphic-intensive tasks, theSS508 ensures an immersive viewing experience.4.Long Battery Life: With a long-lasting battery, the SS508 enables youto stay productive on the go. You can enjoy extended usage without worrying about frequent charging or running out of battery power.5.Advanced Connectivity Options: The SS508 is equipped with arange of connectivity options, including Wi-Fi, Bluetooth, and USB ports. This ensures seamless connectivity with other devices and allows you to transfer data, share files, and connect to the internet effortlessly.SpecificationsThe SS508 comes with the following specifications:•Processor: [Insert processor details]•RAM: [Insert RAM details]•Storage: [Insert storage capacity and type]•Display: [Insert display size and resolution]•Battery: [Insert battery capacity]•Operating System: [Insert operating system details]•Connectivity: [Insert connectivity options]SetupSetting up the SS508 is a straightforward process. Follow the steps below to get started:1.Unbox the SS508 package and ensure all the accessories are included.2.Power on the device by pressing the power button located [Insertlocation].3.Follow the on-screen instructions to complete the initial setup process,such as selecting language preferences, connecting to a Wi-Fi network, andsigning in with your Google account.4.Once the setup is complete, you can customize various settingsaccording to your preferences, such as display brightness, sound, andnotifications.UsageOnce you have set up the SS508, you can start using it for various tasks and activities. Here are some common use cases:1.Web Browsing: Use the pre-installed web browser or download yourpreferred browser from the app store to browse the internet, access websites, and stay updated with the latest news and information.2.Document Editing: Install a productivity suite such as MicrosoftOffice or Google Docs to create, edit, and collaborate on documents,spreadsheets, and presentations.3.Media Consumption: Download and install media players to enjoyyour favorite movies, TV shows, and music. You can also use streaming services to watch online content.4.Gaming: Install games from the app store or download gamingplatforms to play a wide range of games on the SS508. Enjoy gaming on thehigh-resolution display and powerful performance of the device.munication: Use communication apps such as email clients,messaging apps, and video conferencing tools to stay connected with yourfriends, family, and colleagues.ConclusionThe SS508 is a feature-packed device that offers powerful performance, ample storage, and a high-resolution display. With its versatile functionality, it can cater toa wide range of needs, be it personal or professional. Whether you are using it for work, entertainment, or communication, the SS508 is sure to enhance your productivity and deliver an enjoyable user experience.。
JBT8734-2016版与2012版的差异培训
11
2016版
2012版
12
2017/12/28
3、删除了RVV 2 ×1.0（见2012版表5）（注：在 GB/T5023中有） 4、删除了RVV备注栏允许选用其他芯数或更多 芯数电缆结构。（见2012版表5 ） 5、增加了RVB型电缆曲挠试验条件。
13
6、增加了RVV型电缆的非污染试验。（见表7） 增加了“非污染试验”项目 标准规定：“当采用非硫化型橡皮填充时，其组分与绝 缘和（或）护套之间不应产生有害的相互作用。”这就 是进行非污染试验的依据；标准的规范，是从IEC（ GB/T 5023.1-2008）引用过来的;(注：硫化是指绝缘和/或 护套挤好后的一道加工，目的是为了使弹性体永久交联 ） 非污染试验，是考核电缆材料相互影响的程度，因而是 很重要的。鉴于国内电线电缆多数都是采用天然或合成 纺纤或者纸来做填充，而不是采用非硫化型橡皮填充， 通常都不需进行非污染试验 ！！！ 7、增加了RVS 0.5mm²、0.75mm²软电缆不进行低温冲击 试验的要求。
18
2017/12/28
◆六、第6部分：电梯电缆差异
我公司不生产电梯电缆，暂不介绍。
19
2017/12/28
◆七、注意事项
1、对于已不在CCC范围的产品应注意避免打印CCC标识。 2、对于需要重新取证的产品，有部分增加的实验项目 应避免遗漏。 3、对于非CCC产品无护套电缆，需要在绝缘上 印识别标志。内容应至少包括厂名、型号、电压。
铜 158 92.3 69.2 48.2 39 26 19.5 13.3 4.95
镀锡铜 163 95 71.2 49.6 40.1 26.7 20 13.7 5.09
铜 167 97.8 73.4 51.1 41.4 27.6 20.7 14.1 8.47
刹车片国内型号FMIS代码表格2013
2012-2013 菲亚特500 掀背/两箱/500C
派朗
2008- 博锐 1.4
2004-2007 E87/E81 116i/118i/120i
2007- E87/E81 120i/130i
1989-1998 E36 所有车款
1998-2005 E46 所有车款
2005-2007 E90 318i 320i
2006- 速腾 1.8T (Sagitar)
2005- 新甲壳虫
(Beetle) 进口车
一汽大众 2006-
迈腾 1.6 迈腾 2.0
(Magotan)
2004- 辉腾 3.0/4.2 (Phaeton) 进口车
2002- 辉腾 6.0 (Phaeton) 进口车
一汽大众
2002-2006 途锐 02款
2008- 奥迪 A5 1.8T 2.0TDI 3.0T 3.2FSI
1994-1997 奥迪 A6 老款 C4 旧款6缸
1997-1998 奥迪 A6 2.7(8片）
2005- 奥迪 A6 2.7T/3.7/4.2quattro
1997-2005 奥迪 A6 C5 1.8L/1.8T/2.4/2.8
2008- CC 1.8T 2.0T
2008- CC 3.6
2009-2012 CC VR6
2013- CC VR6 新款
2009
CC
2010-2012 CC
奥迪 80
1990-1994 奥迪 100
2003- 奥迪 A3
2001-2008 奥迪 A4
2008- 奥迪 A4L
2008- 奥迪 A4L 2.0T 3.0
1995-2002 W210 E200/220/230/250
瑞特拉电子产品购买指南说明书
241For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberUseful Cooling Capacity: 2400 - 5794 BTU (703 - 1697 W)Part No. with basic controller 3303.1042)3303.1142)3304.1043304.1143304.1443305.1043305.1143305.144Part No. with comfort controller 3303.5042)3303.5142)3304.5043304.5143304.5443305.5043305.5143305.544Voltage V , Hz230, 50/60115, 60230, 50/60115, 60400, 50/ 460, 60, 3~230, 50/60115, 60400, 50/ 460, 60, 3~Dimensions inches (mm)H x W x D24 x 11 x 12 (620 x 285 x 298)40 x 16 x 14 (1020 x 405 x 358)Useful cooling capacity Q KBTU (W)T i 131 T a 1312400 (703)3916 (1147)5794 (1697)Useful cooling capacity Q K to DIN 3168 BTU (W)T i 95 T a 951708/2083(500/610)1708 (500)3415/3620 (1000/1060)5123/5157 (1500/1510)T i 95 T a 122956/1195(280/350)956 (280)2698/2869 (790/840)4201/4269 (1230/1250)Rated current maximum 2.6/2.6 A 5.7 A 5.4/5.0 A 10.6/11.1 A 2.8/2.9 A 6.0/6.5 A 12.1/13.6 A 2.6/2.9 A Starting current 5.1/6.4 A 11.5 A 12.0/14.0 A 26.0/28.0 A 11.5/12.7 A 22.0/24.0 A 42.0/46.0 A 12.2/11.3 A Pre-fuse T 10.0 A 10.0 A 10.0 A 16.0 A 10.0 A 1)16.0 A 20.0 A 10.0 A 1)Power consumption Pel toDIN 3168T i 95 T a 95360/380 W 470 W 700/650 W 725/680 W 580/550 W 850/1000 W 880/1050 W 800/980 W T i 95 T a 122420/390 W500 W 750/710 W 780/750 W 660/680 W 1000/1160 W 1040/1200 W 960/1150 W Cooling coefficient j =Q K /PelT i 95 T a 95 1.4 1.7 1.8 1.7 1.9Refrigerant R134a, 6.0 oz (170 g)R134a, 17.6 oz (500 g)R134a, 21.1 oz (600 g)Maximum allowable operating pressure 406 psi (28 bar)363 psi (25 bar)Temperature and setting range Comfort Controller - 68 to 131° F (+20 to +55° C) / Basic Controller - 86 to 131° F (+30 to +55° C)Environmental ratings UL Type 4X (IP 66)Duty cycle 100%Type of connection Plug-in terminal strip Weight lb (kg)55.1 (25)108.2 (49)119.0 (54)110.2 (50)112.4 (51)123.5 (56)114.6 (52)Material Type 304 stainless steelAir displacement offans External circuit 203 cfm (345 m 3/h)530 cfm (900 m 3/h)530 cfm (900 m 3/h)Internal circuit 182 cfm (310 m 3/h)353 cfm (600 m 3/h)471 cfm (800 m 3/h)Temperature control Basic or comfort controller (factory setting 95° F [+35° C])Accessories PU Page Door-operated switch 14127.010–Master/slave cable for comfortcontroller13124.100–3124.100267RiDiag II including cables for comfortcontroller13159.100267Interface card for comfort controller 13124.200268Condensate hose 13301.6103301.6122731) Motor circuit breaker. 2)Internal condensate evaporator not included. Special voltages and technical modifications available on request.Wallmounted UL T ype 4X Air ConditionerCon guration:Fully wired ready for connection, including drilling template and assembly parts. With nano-coated condenser and integrated condensate evaporator.Protection Ratings:UL and cUL recognized, CSA UL Type 4XUL file: SA8250 Material:Type 304 stainless steel Note:Air conditioner with comfortcontroller may be integrated into a monitoring system with an optional interface card 3124.20 (RS 232, RS 485, RS 422 and PLC interface). See page 268. Made in the USA.000C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o242For additional technical information visit Metric measurements for this product are exact, imperial measurements are rounded to the nearest whole numberUseful Cooling Capacity: 8706 - 10525 BTU (2550 - 3083 W)Part No. with basic controller 3328.1043328.1143328.1443329.1043329.1143329.144Part No. with comfort controller 3328.5043328.5143328.5443329.5043329.5143329.544Rated operating voltage V , Hz 230, 50/60115, 50/60400, 50/460, 60, 3~230, 50/60115, 50/60400, 50/460, 60, 3~Dimensions inches (mm)H x W x D 65 x 16 x 15 (1650 x 405 x 388)Useful cooling capacity Q K BTU (W)T i 131 T a 1318706 (2550)10525 (3083)Useful cooling capacity Q K to DIN 3168 BTU (W)T i 95 T a 956860/8025 (2000/2350)8538/9392 (2500/2750)T i 95 T a 1224952/5772 (1450/1690)5464/5977 (1600/1750)Rated current max. 7.5 A/9.1 A 14.7 A/17.3 A 2.8 A/3.3 A 8.6 A/10.6 A 17.0 A/22.0 A 3.7 A/3.8 A Start-up current 22.0 A/26.0 A36.0 A/39.0 A6.8 A/7.8 A 21.0 A/21.0 A44.0 A/42.0 A6.8 A/7.6 A Pre-fuse T16.0 A25.0 A 10.0A/10.0 A 1)16.0 A 25.0 A 10.0 A/10.0 A 1)Power consumption Pel to DIN 3168 T i 95 T a 951025/1200 W 1085/1250 W 1050/1275 W 1450/1675 W 1500/1725 W 1425/1625 W T i 95 T a 1221250/1350 W1300/1410 W1275/1525 W1625/2000 W1675/2065 W1675/1975 WCooling coefficient j = Q K /Pel T i 95 T a 951.72.31.92.0RefrigerantR134a, 31.7 oz (900 g)Maximum allowable operating pressure 406 psi (28 bar)Temperature and setting range Comfort Controller - 68 to 131° F (+20 to +55° C) / Basic Controller - 86 to 131° F (+30 to +55° C)Protection rating UL Type 4X (IP 66)Duty cycle 100%Type of connection Plug-in terminal stripWeight lb (kg)176.4 (80)191.8 (87)176.4 (80)183.0 (83)198.4 (90)183.0 (83)MaterialType 304 stainless steelAir displacement of fans External circuit 377 cfm (640 m 3/h)418 cfm (710 m 3/h)Internal circuit324 cfm (550 m 3/h)377 cfm (640 m 3/h)Temperature control Basic or comfort controller (factory setting 95° F [+35° C])Accessories PU Page Door-operated switch14127.010–Master/slave cable for comfort controller13124.100267RiDiag II including cables for comfort controller 13159.100267Interface card for comfort controller 13124.200268Condensate hose13301.6122731)Motor circuit breaker. Special voltages available on request. We reserve the right to make technical modifications.Wallmounted UL T ype 4X Air ConditionerCon guration:Fully wired ready for connection, including drilling template and assembly parts. With nano-coated condenser and integrated condensate evaporator.Protection Ratings: UL and cUL recognized UL Type 4X UL file: SA8250Material:Type 304 stainless steelNote:Air conditioner with comfortcontroller may be integrated into a monitoring system with an optional interface card 3124.200(RS 232, RS 485, RS 422 and PLC interface). See page 268. Made in the USA.C o u r t e s y o f C M A /F l o d y n e /H y d r a d y n e ŀ M o t i o n C o n t r o l ŀ H y d r a u l i c ŀ P n e u m a t i c ŀ E l e c t r i c a l ŀ M e c h a n i c a l ŀ (800) 426-5480 ŀ w w w .c m a f h .c o。
车辆电子设备可靠性测试标准及项目汇总
车辆电子设备可靠性测试标准及项目汇总本文档旨在提供车辆电子设备可靠性测试的标准和项目汇总，以确保车辆电子设备的可靠性和稳定性。
以下是可靠性测试的一些关键标准和项目。
1. 标准- ISO : 该标准规定了车辆电子设备可靠性测试的要求，包括振动、温度、湿度、电磁兼容性等方面的测试。
在进行可靠性测试时，应符合ISO 标准的相关要求。
ISO 16750: 该标准规定了车辆电子设备可靠性测试的要求，包括振动、温度、湿度、电磁兼容性等方面的测试。
在进行可靠性测试时，应符合ISO 16750标准的相关要求。
- SAE J1211: 该标准主要指导车辆电子设备的可靠性设计和测试。
其核心内容包括温度、湿度、振动、冲击等环境试验、电磁兼容性试验、可靠性试验等方面的要求。
SAE J1211: 该标准主要指导车辆电子设备的可靠性设计和测试。
其核心内容包括温度、湿度、振动、冲击等环境试验、电磁兼容性试验、可靠性试验等方面的要求。
2. 项目汇总2.1 振动测试- 频率响应分析：通过将车辆电子设备暴露在各种不同频率的振动环境下，测量设备的频率响应特性，以评估其在振动环境下的可靠性。
频率响应分析：通过将车辆电子设备暴露在各种不同频率的振动环境下，测量设备的频率响应特性，以评估其在振动环境下的可靠性。
- 冲击响应测试：通过施加冲击负载来模拟车辆行驶过程中的冲击，评估设备在冲击环境下的可靠性和耐久性。
冲击响应测试：通过施加冲击负载来模拟车辆行驶过程中的冲击，评估设备在冲击环境下的可靠性和耐久性。
2.2 温度测试- 低温测试：将车辆电子设备置于低温环境下，测试设备在低温条件下的性能和可靠性。
低温测试：将车辆电子设备置于低温环境下，测试设备在低温条件下的性能和可靠性。
- 高温测试：将车辆电子设备暴露在高温环境下，测试设备在高温条件下的性能和可靠性。
高温测试：将车辆电子设备暴露在高温环境下，测试设备在高温条件下的性能和可靠性。
2.3 湿度测试- 湿热测试：将车辆电子设备置于高温高湿环境下，测试设备在湿热条件下的性能和可靠性。
REV121620 N150钢质轮胎拖车车辆说明书
Steel Trailer Cart, 18 cu.ft., 2000 lb.,PneumaticInstruction & AssemblySAVE THESE INSTRUCTIONS FOR FUTURE REFERENCETable of ContentsGeneral Warnings and Rules (3)Hazard Signal Word Definition (4)Controls and Features Identification (5)Component & Hardware .................................................................................... 6, 7 Assembly Instructions ................................................... 8, 9, 10, 11, 12, 13, 14, 15 Operation Instructions .. (16)Maintenance and Storage (17)Specification (18)Parts Drawing & Parts List ...................................................................... 19, 20, 21 Limited Warranty . (22)GENERAL WARNINGSREAD and UNDERSTAND this manual completely before using Steel Trailer Cart. Operator must read and understand all safety and warning information, operating instructions, maintenance and storage instructions before operating this equipment. Failure to properly operate and maintain the steel trailer cart could result in serious injury to the operator or bystanders.Operation Warnings●Do not at any time carry passengers sit or stand on the cart.●Do not allow children to play on, stand upon or climb in the cart.●Always inspect the cart before using to assure it is in good working condition.●Replace or repair damaged or worn parts immediately.●Always check and tighten hardware and assembled parts before operation.●Do not exceed equipment maximum load capacity of 2000lb.●Avoid large holes and ditches when transporting loads.●Be careful when operating on steep grades (hill) the cart may tip over.●Always operate at reduce speed in rough terrain, along creeks, ditches and on hillsides.●Do not operate close to creeks, ditches and public highways.●To avoid personal injury and/or equipment damage DO NOT EXCEED 10MPH.●Always use caution when loading and unloading the cart.●Only tow with recommended vehicles (Lawn/Garden Tractors and ATVs).●Always secure and lock steel trailer cart to the vehicle hitch before operating.Crush and Cut Hazards●Always keep hands and feet clear from moving parts while operating the equipment.●Always clear and keep work area clean when operating.●Always wear safety gear, eye protection, gloves and work boots when operating the steel trailercart.WARNINGThe warnings, cautions, and instructions outlined in this instruction manual cannot cover all possible conditions or situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product and must be supplied by the operator.PROP 65 WARNINGThis product can expose you to chemicals including lead and lead compounds whichare known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to Assembly Is RequiredThis product requires assembly before use. See “Assembly” section for instructions. Because of the weight and/or size of the steel trailer cart, it is recommended that another adult be present to assist with the assembly. INSPECT ALL COMPONENTS closely upon receipt to make sure no components are missing or damaged.Hazard Signal Word DefinitionsABOUT YOUR STEEL TRAILER CARTThis steel trailer cart has a rugged steel construction and is designed to carry a wide range of materials. The steel trailer cart will easily haul up to 2000lbs of tools, firewood, animal feed, trash, landscaping materials, cement or anything else that needs to moved. Easy to use removable tailgate makes loading and un-loading fast and convenient. Never exceed the rated load capacity of 2000lbs when operating the steel trailer cart.Technical specifications on the steel trailer cart are provided in the “Specifications” section of this manual.DANGERWARNING CAUTION CAUTION used without the safety alert symbol potentially hazardous situation which, if not avoided, may result in property damage.CAUTIONRead this owner’s manual before operating the equipment. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference.1) Removable Tailgate – Push up to remove for loading or unloading. 2) Cart Box – Do not exceed rated load capacity 2000lb. 3) Tires / Wheel – Do not exceed the recommended rate.4) Hitch – Pin-type design use only with approve vehicles .1 3CAUTION Array Read and follow all instructions for assembly and operation. Failure to properly assemble this equipment could result in serious injury to the user or bystanders, or cause equipment damage.STEEL TRAILER CART COMPONENT PARTS AND ASSEMBLYTake all parts out of the shipping crate and inspect components to ensure there are no missing pieces before starting to assemble the steel trailer cart follow steps 1 through 15.TOOLS REQUIRED•Pliers•Screw Driver•10mm & 14mm WrenchRef. Description QTY Ref. Description QTY1 Tailgate 1 10 Tie Rod 12 Tailgate Reinforcement Bracket 1 11 Hitch Bracket 13 Cart Bed Side Panel 2 12 Tongue, Front Section 14 Cart Bed Bottom Panel 2 13 Tongue, Rear Section 15 Front Panel 1 14 Pivot Bars 26 Wheel Support 2 15 Wheels 47 Axle, Rear 1 16 Tailgate Guides 28 Front Axle Support 2 17 Tongue Reinforcement Angle 19 Front Axle Channel 1 18 Corner Caps 2Ref. Description QTY Ref. Description QTYA Hex Bolt M12x120 1 L Hair Cotter Pin Ø12 7B Hex Bolt M8x65 4 M Large Flat Washer Ø12 1C Hex Bolt M12x30 3 N Hair Cotter Pin 1D Hex Bolt M8x20 14 O Cotter Pin 6E Round Head Bolt M6x16 45 P Hitch Pin 1F Round Head Bolt M8x16 36 Q Pivot Bushing 1G Hex Nut M6 45 R Flat Washer Ø20 8H Hex Nut M8 54 S Hub Cap 4I Lock Nut M12 4 T Flat Washer Ø6 45 J Lock Washer Ø6 45 U Flat Washer Ø8 54 K Lock Washer Ø8 54NOTE: You may have extra nuts & bolts when finished.STEP 1:1. Remove the hardware pack and all loose parts from the carton. Be sure the carton is empty beforediscarding.2. Lay out all the parts and hardware as shown on pages 2 and3.3. Assemble the cart bed side body and bottom body with Round Head Bolt M6x16 (E), Flat Washer Ø6(T), Lock Washer Ø6 (J) and Hex Nut M6 (G). See Figure 1.Do not tighten at this stage.Figure 1STEP 2:1. Position cart body halves upright on a smooth level surface such as a garage floor or a paveddriveway. See Figure 2.2. Assemble halves together using nine Round Head Bolt M6x16 (E), Flat Washer Ø6 (T), Lock WasherØ6 (J) and Hex Nut M6 (G) as shown in Figure 2.Do not tighten at this stage.Figure 2STEP 3:1. Position the tailgate reinforcement bracket on outside of cart as show in figure 3. Assemble the bottomof the cart body using six Round Head Bolt M8x16 (F), Flat Washer Ø8 (U), Lock Washer Ø8 (K) and Hex Nut M8 (H). Do Not tighten. See Figure 3.2. Position the tailgate guides with the holes to the rear as shown in figure3. Assemble the guides to theinside of the cart using six Round Head Bolt M6x16 (E), Flat Washer Ø6 (T), Lock Washer Ø6 (J) and Hex Nut M6 (G). Do Not tighten.3. Assemble two Round Head Bolt M6x16 (E), Flat Washer Ø6 (T), Lock Washer Ø6 (J) and Hex Nut M6(G) to the top rear corners of the cart. Do not tighten. See Figure 3.4. Tighten the six bolts assembled in step 6 and the two bolts in step 8. Tighten the nine bolts assembledin step 5, keeping the bottom of the cart body halves even.Figure 3STEP 4:1. Tighten the six bolts assembled in step 6 and the two bolts in step 8. Tighten the nine bolts assembledin step 5, keeping the bottom of the cart body halves even.2. Lower the cart to rest upside down on its top flanges. See Figure 4.3. Assembling the wheel support at the rear of the cart using twelve M8X16 Round Head Bolts (F), FlatWasher Ø8 (U), Lock Washer Ø8 (K) and M8 Hex Nuts (H) as shown in Figure 4. Bolt heads go on inside of cart. Tighten.4. Connecting the 2 wheel supports by eight M8X20 Hex Bolts (D), Flat Washer Ø8 (U), Lock Washer Ø8(K) and M8 Nuts.Figure 4STEP 5:1. Assemble the axle through the wheel support as shown in Figure 5.2. Apply grease to the ends of the axle now or use a grease gun after the wheels are assembled.3. Assemble a Ø20 Flat Washer (R), a wheel (valve stem out), another Ø20 Flat Washer and a Cotter Pin(O) to each end of the axle as shown in Figure 5.4. Assemble a Hub Cap (S) over the Ø20 Flat Washer (R) on each end of the axle as shown in Figure5.Figure 5STEP 6:1. Stand the cart on end, front end facing up.2. Assemble the two front axle supports to the cart using twelve M8X16 Round Head Bolts (F), FlatWasher Ø8 (U), Lock Washer Ø8 (K) and M8 Hex Nuts (H) as shown in Figure 6. Do not tighten yet.Figure 61. Place the front axle channels between the front axle supports. Assemble two M8X65 Hex Bolts (B)through the holes in the ends of the supports and secure with Ø8 Lock Washer (K), Ø8 Flat Washer (U) and M8 Hex Nuts (H). Don’t tighten. See Figure 7.Figure 7STEP 8:1. Assemble the tongue reinforcement angle to the back side of the axle supports as shown in Figure 8.Use two M8X65 Hex Bolts (B), Ø8 Lock Washer (K), Ø8 Flat Washer (U) and M8 Hex Nuts (H). Don’t tighten.2. Make sure the center bolt (pivot bolt ) is inserted as far as possible through the axle channels and thentighten the four bolts assembled in Figure 8,which fasten the front axle supports to the cart bed.Figure 81. Connecting the front panel with the bottom panel by using six M8X16 Round Head Bolts (F), Ø8 LockWasher (K), Ø8 Flat Washer (U) and M8 Hex Nuts (H). Then connect the front panel with the side panel by using six M6X16 Round Head Bolts (E), Ø6 Lock Washer (J), Ø6 Flat Washer (T) and M6 Hex Nuts (G). See Figure 9.2. Assemble two corner caps to the front of the cart using four M6X16 Round Head Bolts (E), Ø6 LockWasher (J), Ø6 Flat Washer (T) and M6 Hex Nuts (G). Tighten. See Figure 9.Figure 9STEP 10:1. Assemble the tie rod to the axle spindles using two M12X30 Hex Bolts (C), four Ø12 Flat Washer (L)and two M12 Hex Lock nuts (I), Tighten, leaving loose enough that the spindles still pivot. See Figure10.Figure 10STEP 11:1. Remove the M12 Lock nut (I) from the center pivot bolt. Assemble rear tongue section, the PivotBushing (Q), the Large Ø12 Flat Washer (M) and M12 Hex Lock Nut (I) onto the pivot bolts as shown in Figure 11. (The Pivot Bushing (Q) fits into the hole in the tongue.) Tighten.2. Fasten the tongue to the tie rod as shown in Figure 11, using a M12X30 Hex Bolt (C), two Ø12 FlatWasher (L) and a M12 Hex Lock Nut (I). tighten, leaving loose enough that the tongue can pivot.3. Apply grease to the axle spindles now or use a grease gun after wheels are assembled.Figure 11STEP 12:1. Assemble a Cotter Pin (O) to the inside hole in an axle spindle. Place a Ø20 Flat Washer (R), a wheel(valve stem facing out) and another Ø20 Flat Washer (R) onto the axle spindle. Assemble a Cotter Pin (O) to the end hole in the axle. Repeat on other side. See Figure 12. Note: Prevent the axle spindle from pivoting downward until the wheel is secures to it by the outer Cotter Pin (O).2. Assemble a Hub Cap (S) over the Ø20 Flat Washer (R) on each wheel. See Figure 12.Figure 121. To lower the cart onto its wheels you should: a：Chock the rear wheels as shown in Figure 13.b: Getthe assistance of another person to help you lower the cart onto it’s wheels.Figure 13STEP 14:1. Assemble the two pivot bars to the front tongue section using four M8X20 Hex Bolts (D), Ø8 LockWasher (K), Ø8 Flat Washer (U) and M8 Hex Nuts (H). Don’t tighten yet. See Figure 14.2. Assemble the pivot bars to the rear tongue section using a M12X120 Hex Bolt (A) and Ø12 FlatWasher (L) and M12 Hex Lock Nut (I). Tighten the Lock nut, leaving it just loose enough to allow the front tongue to pivot. Now tighten the four Hex Bolts, Lock Washers and Hex Nuts assembled to the front tongue in Step 31. See Figure 14.Figure 141. Assemble the hitch bracket to the front tongue section using two M8X20 Hex Bolts (D), Ø8 LockWasher (K), Ø8 Flat Washer (U) and M8 Hex Nuts (H). Tighten. See Figure 15.2. Assemble the Hitch Pin (P) through the hitch bracket and the tongue and secure with the Hair CotterPin (N) shown in Figure 15.3. Place the tailgate down into the tailgate guides with the top and bottom lips of the tailgate facing to therear.4. If you have not yet greased the wheels, fill the wheel hubs with automotive bearing type grease.Figure 15WARNINGBefore using the steel trailer cart, review the instructions below and safety information. Failure to follow these instructions may result in property damage or injury to the operator or bystanders.USING YOUR STEEL TRAILER CART1. DO NOT exceed rated capacity of 2000lb (907kg).2. ALWAYS secure and lock the steel trailer cart to the vehicle hitch before operating.3. ONLY use approved vehicles when towing the steel trailer cart (Lawn/Garden Tractors and ATVs)4. NEVER tow the steel trailer cart with box raised.5. DO NOT over fill the steel trailer cart. Over flow loads can cause the cart and towing vehicle to losetraction and skid out of control.6. ONLY fill the steel trailer cart to a comfortable load. Extremely heavy loads will be difficult to operateand unload.7. ALWAYS use the steel trailer cart for its intended purpose.8. ALWAYS make sure that the tow vehicle and the combined weight of the operator MUST BE greaterthan the load of the cart weight for proper control.9. DO NOT use cart on public highways or roads.10. NEVER exceed 10mph when towing the steel trailer cart.11. DO NOT make sharp turns that may cause the Lawn/Garden Tractor or ATV tires to rub against thesteel trailer cart.12. ALWAYS slow down before turning.13. ALWAYS use caution when backing the utility cart. To avoid the cart from “jack-knifing” always backup in a straight line.WARNINGImproper maintenance and storage of the steel trailer cart may void your warranty.MAINTENANCE•After each use clean material out of the cart box.•Rinse/dry inside and outside of the steel trailer cart after each use.•Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE.•Regularly grease the axle and the wheel bearing area or when needed.•Periodically check all fasteners for tightness.•Annually clean and lightly lubricate parts.•Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.•Never exceed load capacity rating of 2000lb (907kg) it will damage the steel trailer cart.IMPORTANT:If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement parts that do not meet specifications may result in a safety hazard or poor operation.STORAGE•Never allow material to remain in the steel trailer cart for extended periods of time.•Before storing make sure the cart is clean and dry for years of trouble-free service.•Store indoors or protected area during severe weather and winter months.•When storing outside always keep the tongue a little higher than the back of the cart to allow the moister to easily run out the back and will not accumulate in the box.Load Capacity .............................................................................................. 2000lb Box and Frame Material .................................................................................. S teel Cart Box Size ................................................................................ 60” x 36.5” x 14” Overall Size ................................................................................... 60.5” x 37” x 15” Axle Dimensions ................................................................................................ 3/4” Wheel Size ...................................................................................... 16" x 5" /650-8 Wheel Type ............................................................................................ Pneumatic Hitch Type ................................................................................................. P in StyleRef# Drawing No. Description Qty1 N120-00001-000 Cart Bed 22 N120-00002-000 Front Panel 13 N180-00006-000 Corner 24 9110-06016-000 Screw M6x16 455 9303-06000-000 Lock Washer Ø6 456 9203-06000-000 Hex Nut M6 457 N180-00004-000 Tailgate Guide 28 N120-00003-000Tailgate 19 N120-10000-000 Tailgate Bracket 110 9103-08020-000 Hex Bolt M8x20 1411 N120-00004-000 Pin 112 N180-00012-000 Hitch Bracket 113 N120-00005-000 Tongue 114 9499-03000-000 Pin 115 9303-08000-000 Lock Washer Ø8 5416 9203-08000-000 Hex Nut M8 5417 N120-00006-000 Pivot Bar 218 9103-12120-000 Hex Bolt M12x120 219 9307-12000-000 Flat Washer Ø12 720 9203-12000-000 Nylon Lock nut M12 521 N120-00007-000 Tongue 122 9103-08065-000 Hex Bolt M8x65 423 N120-00008-000 Tie Rod 124 9103-12030-000 Hex Bolt M12x30 325 N150-00024-000 Wheel Support 226 N120-00009-000 Front Axle Support 227 9404-03030-000 Cotter Pin Ø3x30 628 9103-10100-000 Hex Bolt M10x100 229 N120-00010-000 Front Axle Channel 230 N120-00011-000 Split Plastic Bearing 431 N120-00012-000 Steering Shaft Washer 832 N120-20000-000 Steering Shaft 233 9307-10000-000 Flat Washer Ø10 234 9203-10000-000 Lock Nut M10 2Ref# Drawing No. Description Qty35 N120-00013-000 Tongue Bracket 136 N120-00014-000 Pivot Bushing 137 9302-12000-000 Big Flat Washer Ø12 138 N180-00016-000 Axle Cover 239 N120-00017-000 Axle Bushing 440 N180-20000-000 Wheel 441 N120-00016-000 Axle 1WarrantyFor one year from the date of purchase YTL International will replace for the original purchaser, or repair the steel trailer cart. The warranty will not apply to any unit which was not assembled correctly, misused, overloaded or which has been used or operated contrary to our instructions, or which has been repaired or altered by anyone other than an authorized representative.Warranty ExclusionsThis warranty does not cover cosmetic defects such as paint, decals or wear items such as tires. This warranty will not cover failures or problems due to acts of God, or events or forces beyond the control of the manufacturer.Normal Wear ExclusionThe steel trailer cart needs periodic service to perform well. This warranty does not cover repair when normal use has exhausted the life of a part or the equipment as a whole.Installation, Use and Maintenance ExclusionThis warranty will not apply to parts and/or labor if the steel trailer cart has been misused, neglected, involved in an accident, abused, loaded beyond its limits, modified or assembled incorrectly. Normal maintenance is not covered under this warranty.Limits of Implied Warranty and Consequential Damage ExclusionYTL International disclaims any obligation to cover any loss of time, use of this product, freight, or any incidental or consequential claim by anyone from using this steel trailer cart. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR.An exchange unit will be subject to the original warranty. The length of the warranty governing the exchanged unit will have the date as the purchase date of the original unit. This warranty gives you certain legal rights which may change from state to state. Your state may also have other rights you may be entitled to that are not listed within this warranty.Contact InformationYTL International Inc.17517 Fabrica Way, Suite HCerritos, CA 90703Phone: (888) 723-6534Phone: (562) 404-8016Fax: (562) 404-8013Email:**************************。
PE-BR-0025 20367 产品说明书
Parts Breakdown Model PE-BR-0025 20367Parts Breakdown Model PE-BR-0025 20367Model PE-BR-0025 20367Parts Breakdown27686PFS Sex UNC1/4x3/4 RTZB for 2036700030.227709Screw M8x16 DIN 933 ZB for 2036719059.427748Nylon Washer for 2036734330.738143Screw 5/16x5/16 for 2036700031.038341Washer 1/4x5/8x1.2mm Stainless Steelfor 2036719384.427749Door Set for 2036734339.030234Washer L 1/4x1 6 ZB for 2036700100.7AN884Prepared Glue for 2036720468.427750Motor Support for 2036734354.427688Clamp K22 (T 50R) for 2036700210.027711Screw M5x10 DIN 933 Stainless Steelfor 2036721081.127751Trigger Axis C / Fold for 2036734365.038142Moving Poley for 2036700955.527712Ring 10 DIN 6799 for 2036721127.324025Abrasive Disc for 2036734366.8 21838Sphere with Hole 1/2 for 2036701661.627714PFS M5x5 DIN 916 Inox for 2036722786.227757Lateral Latch Cover for 2036735264.0 27694Ring 10x1 DIN 471 for 2036703115.127715PFS M6x30 DIN 933 Inox for 2036724861.427758Pino da Trava Lateral for 2036735266.7 16403Washer L 3/8 Stainless Steel for 2036703213.127716Key Way 4.76x25 for 2036725657.927759Side Lock Spring for 2036735280.2 66186Term. Pre-Isol.AN-2434 for 2036703283.227720Omcan Logo (Machines) for 2036727154.3AE679CB.3x3.3mm2 SJX2M Certif. for 2036735740.5 27696Nylon Cover CN 4478 for 2036703678.127721Button for 2036727551.427760Chapa Contactor Grey for 2036736094.5 27697Knob M5x10mm for 2036703967.527722Bearing 6005 DDU for 2036728584.627761Nipple/Reduction Set for 2036736394.4 27699Cramp T 18R Small for 2036704203.027725Etiq.Para Buttonhole Timer for 2036731211.827762Aluminum Oxide No.46 for 2036736969.1 AN883Nipel 1/2" - PVC (Krona) for 2036704625.667039Nut M4 DIN 985 Stainless Steel for 2036731800.038140Flange Fixacao da Porta for 2036745231.9 30194Reduction Bush for 2036704626.427726Cord Holder PG13.5 LC+P/9 for 2036731923.638141Driven Pulley D.164 (Primer) for 2036746047.8 27702PFS M6x20 DIN 965 Inox for 2036708779.327727Water Inlet Set for 2036733630.038145Door with Rubber for 2036749073.3AH533PFS M3x16 DIN 7985 ZB for 2036709093.0AE678American Plug Cert.20A 115V (4A255)for 2036733870.2AN193Rotary Disconnect Switch MSW 20 P2for 2036750808.027703Ring 47x1.75 DIN 472 for 2036709217.7AN885CS Disco BR. for 2036734131.264824Central Shaft for 2036752275.916416Screw M6x12 DIN 933 Stainless Steelfor 2036712384.627728Background Machined (Etched) for 2036734132.064822Guide Pin 8x50 DIN 7 M6 for 2036752276.7AH588PFS M6x16 DIN 933 Inox for 2036712426.527730Aro Usinado (Cinza) for 2036734139.865981Insulation Frame FE006-230 for 2036756228.916422Screw M8x20 DIN 933 Stainless Steelfor 2036712455.927734Retainer 25x47x10 for 2036734175.4AN886Mini Cont.CWB25-11-30D13 110V50/60Hz for 2036761414.916423Washer L.A8.4 Stainless Steel for 2036712460.527736Rubber Protection for 2036734177.0AM613Wago Splicing Connector 5x0.25-4mm2for 2036766546.038044Nut M3 DIN 934 Stainless Steel for2036712853.827737Washer 7x30x3 for 2036734179.7AM614Wago Splicing Connector 2x0.25-4mm2for 2036767178.938144Belt A 22 for 2036712945.327741PE Machined (Etched) for 2036734209.2AN887Outlet Tub for 2036767186.038086Screw M8x16 DIN 933 Stainless Steelfor 2036713238.127742Rim with Mounted Feet for 2036734210.6AN888Fund Closing for 2036768181.424021Timer for 2036714050.327743Spring Trigger for 2036734215.7AN889CS Cabinet for 2036768184.9 16435Screw M4x10 for 2036714463.027744Separator Door for 2036734218.1AN890Full Cabinet for 2036768185.7 30279Screw B.3.5x9.5 DIN 7971 for 2036715599.327745Tampa Trigger for 2036734225.4AN200Nylon Washer 30x22x4.5mm for 2036769406.1 64823Screw M5x5 DIN 916 for 2036715725.224024Funnel Lid (MOL.37663.9) for 2036734305.6AN891Complete Electrical Harness for 2036769961.1 27706Timer Label for 2036716833.527747Adapt.Short Thread D.60x2 for 2036734329.3。
技术数据2031 有效日期：2017年8月 替代：2016年6月 产品特点说明书
Product features •UL® Listed, Std. 248-14, Guide JDYX, File E19180•CSA® Certified, C22.2 No. 248.14, Class 1422-01, File 53787•CEFuse holderHLR•UL Recognized, 12A, 300 Vac, Guide IZLT2, File E14853•CSA Certified, 12A, 300 Vac, Class 6225-01, File 47235•CEHLR-2 and HRL-2L•UL Recognized, 15A, 300 Vac, Guide IZLT2, File E14853•CSA Certified, 15A, 300 Vac, Class 6225-01, File 47235•CEG MF and GRF(fuse) HLR (fuse holder) Non-rejecting, time-delay fuse and in-line fuse holders•HLR carrier comes with 6” of #18 red insulated solid copper wire attached to the line side•Customer inserts a #18 insulated solid copper wire into load side receptacle•Order part number HLR-2 to obtain 6”of #18 black insulated solid copper wire pre-installed in a load side receptacle•Order part number HLR-2L to obtain 6”of #18 black insulated solid copper wire packaged loose (un-installed)•An alternative to the HLR fuseholder isthe A fuseholder. The A fuseholder comes WITHOUT leads. The customer inserts #18 insulated solid copper wire into the line side receptacle as well as into the load side receptacle. It has the same body dimensions, utilizes the same mounting hole, and takes the same mounting clips as the HLR. The A fuseholder is UL Recognized, 10A, 300Vac, Guide IZLT2, File E14853 and CSA Certified, 10A, 300Vac, Class 6225-01, File 47235•Fuse and knob are an integral one-piece unit. There are no replacement knobs (caps)•Units can be panel mounted with a separate steel clip. For the knockout hole (see above), choose #BK/A-104. For the keyhole punch type hole, choose #6374 for panels 0.043”to 0.062” thick, or #4909 for panels 0.030” to 0.042” thick •Do not put tension on line (rear) terminal of fuseholder Catalog symbol:G MF, GRF (fuse) HL R (fuse holder) Ampere Rating:GMF 3/10-6 1/4 A, GRF 7 - 10 A Voltage Rating: 300 Volts AC or lessInterrupting Rating: 10,000 AAgency informationFuseGMF, GRFHLRFuse Holder Fuse HolderGMF-3/10HLR GMF-3HLRGMF-1/2HLR GMF-3 2/10HLRGMF-6/10HLR GMF-4HLRGMF-8/10HLR GMF-5HLRGMF-1HLR GMF-6 1/4HLRGMF-1 1/4HLR GRF-7HLRGMF-1 6/10HLR GRF-8HLRGMF-2HLR GRF-10HLRGMF-2 1/2HLR GMF-10HLRGMF-2 8/10HLRCatalog numbersEatonElectronics Division 1000 Eaton Boulevard Cleveland, OH 44122United States/electronics © 2017 EatonAll Rights Reserved Printed in USAPublication No. 2031 SB02233 August 2017Eaton is a registered trademark.All other trademarks are property of their respective owners.Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin.GMF and GRF(fuse) HLR (fuse holder)Non-rejecting, time-delay fuse and in-line fuse holdersTechnical Data 2031Effective August 2017T i m e i n s e c o n d s0.10.30.5111.6233.2410100200Time-current curves–average meltAmp rating100101.10.01RMS symmetrical current in ampsDimensions - in (mm):T i m e i n s e c o n d s0.1151010100200Time-current curves–average meltAmp 78rating1001010.10.01RMS symmetrical current in amps(15.9mm)FuseKeyhole punchKnockout holeFuse and carrier。
减压阀标准汇总
减压阀标准汇总标准编号标准中文名称 标准英文名称JB/T10367-2002 液压减压阀GB/T12245-1989 减压阀性能试验方法 Methods of performance test for pressure reducing valves GB/T12246-1989 先导式减压阀 Pilot-operated reducing valves GB/T12244-1989 减压阀一般要求General specification for pressure reducing valvesGB/T1852-1993 船用法兰铸钢蒸汽减压阀 Marine steel flanged steam pressurereducing valvesGB10868-1989电站减温减压阀技术条件 Specification of the steam convertingvalve for fossil power stationsJB/T7376-1994(2005复审)气动空气减压阀 技术条件 JB/T7310-1994(2005复审)装载机用减压阀式先导阀 JB/T53361-1994 液压减压阀产品质量分等(试行)JB/T53265-1999 先导式减压阀 产品质量分等JB/T2205-2000 减压阀结构长度NF P43-035-2000建筑阀门.供水减压阀和复合供水减压阀.要求和试验 (Building valves - Water pressure reducing valves and combination waterpressure reducing valves - Requirements and tests.)NF A84-420-1991气焊设备和有关方法.减压阀入品接头.尺寸(Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.)NF M88-773-1981商用丁烷容器装置.低压固定调节的家用商品丁烷减压阀(INSTALLATIONS BURNING COMMERCIAL BUTANE. PRESSURE REGULATOR TRIP,LOW-PRESSURE FIXED FLOW,FOR COMMERCIAL BUTANE FOR DOMESTIC USE.)NF M88-775-1990装液态碳氢化合物的钢瓶.可移动部分和半移动部分用高压可调减压阀.功能.标记、试验(LIQUEFIED HYDROCARBONS SYSTEMS IN CYLINDERS. FIXED ADJUSTEMENT,HIGH PRESSURE REGULATOR FOR MOBILE AND SEMI-MOBILE PREMISES. CONSTRU CT ION. OPERATION, MARKING,TESTS.)NF M88-737-2003可运输可再填充液化石油气瓶用减压阀(Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG ).)NF E48-423-2001液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.(Hydraulic fluid power -Pressure-reducing valves, sequence装配面 valves, unloading valves, throttle valves and check valves - Mounting surfaces.)ANSI/ASSE 1003-1995 家用供水系统用减压阀 (Water Pressure Reducing Valves for Domestic Water Supply Systems) ANSI/ASSE 1046-1990 热膨胀减压阀 (Thermal Expansion Relief Valve) ANSI Z 21.22a-1999 减压阀和真空减压阀 (Pressure Relief Valves and Vacuum Relief Valves)ANSI Z 21.22b-2001热水供应系统的减压阀(Relief Valves for Hot Water Supply Systems (same as CSA 4.4b))ANSI/ASTM F 1508-1997 用于蒸汽、气体和液体设备的角型减压阀规范(Specification for Angle Style,Pressure Relief Valves for Steam, Gas, and Liquid Services)ASME A112.4.1-1993 热水器减压阀排水管 (Water heater relief valve drain tubes) ASME PTC 25.3-1988 安全和减压阀(Safety and relief valves)ASTM E 1008-2003地热和其它高温液体设备用减压阀体的安装、检验及维修用标准实施规范(Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications)标准编号 标准中文名称 标准英文名称ASTM F 1795-2000 空气或氮气系统用减压阀标准规范(Standard Specification forPressure-Reducing Valves for Air or Nitrogen Systems)ASTM F 1565-2000 蒸汽设备用减压阀标准规范(Standard Specification forPressure-Reducing Valves for Steam Service)ASTM F 1508-1996 用于蒸汽、气体和液体设备的角型减压阀标准规范(Standard Specification for AngleStyle, Pressure Relief Valves for Steam, Gas and Liquid Services) ASTM F 1370-1992 船上给水系统用减压阀(Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard)BS EN 1567-2000 建筑物阀门.减压阀和组合减压阀.要求和试验(Building valves - Water pressurereducing valves and combination water reducing valves - Requirements and tests)BS ISO 5781-2000 液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.安装面(Hydraulic fluid power - Pressurereducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)BS ISO 6264-1998 液压传动.减压阀.装配面 (Hydraulic fluid power -Pressure-relief valves - Mountingsurfaces)prEN 14071-2000 液化石油气（LPG）罐的减压阀 辅助设备 Pressure relief valves for LPG tanks - Ancillary equipmentBS 6283-2-1991 热水系统中使用的安全和控制装置.压力范围从1bar到10bar温度减压阀规范 (Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar)BS 6283-4-1991 热水系统中使用的安全和控制装置.第4部分:最大供给压力为12bar,标准尺寸包括DN50的微量绷紧减压阀规范 (Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 ba)DIN EN 13953-2003 液化石油气(LPG)用可运输的可再充式储气瓶的减压阀 (Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003)DIN EN 1567-2000 建筑阀门.水减压阀和组合水减压阀.要求和试验 (Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999)JIS B8652-2002 比例电动液压减压阀及安全阀的试验方法 (Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves)JIS F0504-1989 船上机械装置用减压阀的应用和压力调节 (Application and setting pressure of relief valves for ships' machinery)UL 1478-1995 消防泵减压阀 (Fire pumps relief valves )UL 1468-1995 防火设备用直接控制的减压阀和压力控制阀 (Direct acting pressure reducing and pressure restricting valves )JIS B8666-2001 液压动力.减压阀.安装表面 (Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces)JIS B8372-1994 气动装置用减压阀 (PRESSURE REDUCING VALVES FORPNEUMATIC USE)JIS B8664-2001 液压动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀.安装表面 (Hydraulic fluid power --Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)JIS B8410 AMD 1-2003 水管用减压阀(修改件1) (Pressure reducing valves for waterworks (Amendment 1))JIS B8651-2002 比例电动液压减压阀试验方法 (Test methods for electro-hydraulic proportional pressure relief valves) JIS B8410-1999水管用减压阀(Pressure reducing valves for water works)ISO 15500-12-2001 道路车辆.压缩天然气(CNG)燃料系统元部件.第12部分:减压阀(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)) ISO 6264-1998液压传动.减压阀.装配面 (Hydraulic fluid power -Pressure-relief valves - Mounting surfaces)ISO 5781-2000液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.装配面(Hydraulic fluid power -Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)GB/T10868-2005电站减温减压阀。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
二、 含醋酸纤维长丝≥85%色织机织物(HS54082320 )出口数据分析
从出口数量方面来看，千数网数据显示，2016年我国 含醋酸纤维长丝≥85%色织机织物出口数量达到2011米。与去年同期 相比降低了-42.87%。
2012-2016 年 含醋酸纤维长丝≥85%色织机织物出口数量统计
2012-2016 年 含醋酸纤维长丝≥85%色织机织物进口金额统计
一、 含醋酸纤维长丝≥85%色织机织物(HS54082320 )进口数据分析
从进口数量方面来看，千数网数据显示，2016年我国 含醋酸纤维长丝≥85%色织机织物进口量达到783784米。与去年同期 相比降低了-48.05%。
2012-2016 年 含醋酸纤维长丝≥85%色织机织物进口数量统计
含醋酸纤维长丝≥85%色织机织物(HS016年数据）
一、 含醋酸纤维长丝≥85%色织机织物(HS54082320 )进口数据分析
从进口金额方面来看，千数网数据显示，2016年我国 含醋酸纤维长丝≥85%色织机织物进口金额达到25.12万美元。与去 年同期相比增长了36.72%。
二、 含醋酸纤维长丝≥85%色织机织物(HS54082320 )出口数据分析
从出口金额方面来看，千数网数据显示，2016年我国 含醋酸纤维长丝≥85%色织机织物出口金额达到124.47万美元。与去 年同期相比降低了-45.56%。
2012-2016 年 含醋酸纤维长丝≥85%色织机织物出口金额统计