74HC00

合集下载

74HC系列通用逻辑电路功能表

74HC00 TTL 2输入端四与非门74HC01 TTL 集电极开路2输入端四与非门74HC02 TTL 2输入端四或非门74HC03 TTL 集电极开路2输入端四与非门74HC04 TTL 六反相器74HC05 TTL 集电极开路六反相器74HC06 TTL 集电极开路六反相高压驱动器74HC07 TTL 集电极开路六正相高压驱动器74HC08 TTL 2输入端四与门74HC09 TTL 集电极开路2输入端四与门74HC10 TTL 3输入端3与非门74HC107 TTL 带清除主从双J-K触发器74HC109 TTL 带预置清除正触发双J-K触发器74HC11 TTL 3输入端3与门74HC112 TTL 带预置清除负触发双J-K触发器74HC12 TTL 开路输出3输入端三与非门74HC121 TTL 单稳态多谐振荡器74HC122 TTL 可再触发单稳态多谐振荡器74HC123 TTL 双可再触发单稳态多谐振荡器74HC125 TTL 三态输出高有效四总线缓冲门74HC126 TTL 三态输出低有效四总线缓冲门74HC13 TTL 4输入端双与非施密特触发器74HC132 TTL 2输入端四与非施密特触发器74HC133 TTL 13输入端与非门74HC136 TTL 四异或门74HC138 TTL 3-8线译码器/复工器74HC139 TTL 双2-4线译码器/复工器74HC14 TTL 六反相施密特触发器74HC145 TTL BCD—十进制译码/驱动器74HC15 TTL 开路输出3输入端三与门74HC150 TTL 16选1数据选择/多路开关74HC151 TTL 8选1数据选择器74HC153 TTL 双4选1数据选择器74HC154 TTL 4线—16线译码器74HC155 TTL 图腾柱输出译码器/分配器74HC156 TTL 开路输出译码器/分配器74HC157 TTL 同相输出四2选1数据选择器74HC158 TTL 反相输出四2选1数据选择器74HC16 TTL 开路输出六反相缓冲/驱动器74HC160 TTL 可预置BCD异步清除计数器74HC161 TTL 可予制四位二进制异步清除计数器74HC162 TTL 可预置BCD同步清除计数器74HC163 TTL 可予制四位二进制同步清除计数器74HC164 TTL 八位串行入/并行输出移位寄存器74HC165 TTL 八位并行入/串行输出移位寄存器74HC166 TTL 八位并入/串出移位寄存器74HC169 TTL 二进制四位加/减同步计数器74HC17 TTL 开路输出六同相缓冲/驱动器74HC170 TTL 开路输出4×4寄存器堆74HC173 TTL 三态输出四位D型寄存器74HC174HC TTL 带公共时钟和复位六D触发器74HC175 TTL 带公共时钟和复位四D触发器74HC180 TTL 9位奇数/偶数发生器/校验器74HC181 TTL 算术逻辑单元/函数发生器74HC185 TTL 二进制—BCD代码转换器74HC190 TTL BCD同步加/减计数器74HC191 TTL 二进制同步可逆计数器74HC192 TTL 可预置BCD双时钟可逆计数器74HC193 TTL 可预置四位二进制双时钟可逆计数器74HC194 TTL 四位双向通用移位寄存器74HC195 TTL 四位并行通道移位寄存器74HC196 TTL 十进制/二-十进制可预置计数锁存器74HC197 TTL 二进制可预置锁存器/计数器74HC20 TTL 4输入端双与非门74HC21 TTL 4输入端双与门74HC22 TTL 开路输出4输入端双与非门74HC221 TTL 双/单稳态多谐振荡器74HC240 TTL 八反相三态缓冲器/线驱动器74HC241 TTL 八同相三态缓冲器/线驱动器74HC243 TTL 四同相三态总线收发器74HC244 TTL 八同相三态缓冲器/线驱动器74HC245 TTL 八同相三态总线收发器74HC247 TTL BCD—7段15V输出译码/驱动器74HC248 TTL BCD—7段译码/升压输出驱动器74HC249 TTL BCD—7段译码/开路输出驱动器74HC251 TTL 三态输出8选1数据选择器/复工器74HC253 TTL 三态输出双4选1数据选择器/复工器74HC256 TTL 双四位可寻址锁存器74HC257 TTL 三态原码四2选1数据选择器/复工器74HC258 TTL 三态反码四2选1数据选择器/复工器74HC259 TTL 八位可寻址锁存器/3-8线译码器74HC26 TTL 2输入端高压接口四与非门74HC260 TTL 5输入端双或非门74HC266 TTL 2输入端四异或非门74HC27 TTL 3输入端三或非门74HC273 TTL 带公共时钟复位八D触发器74HC279 TTL 四图腾柱输出S-R锁存器74HC28 TTL 2输入端四或非门缓冲器74HC283 TTL 4位二进制全加器74HC290 TTL 二/五分频十进制计数器74HC293 TTL 二/八分频四位二进制计数器74HC295 TTL 四位双向通用移位寄存器74HC298 TTL 四2输入多路带存贮开关74HC299 TTL 三态输出八位通用移位寄存器74HC30 TTL 8输入端与非门74HC32 TTL 2输入端四或门74HC322 TTL 带符号扩展端八位移位寄存器74HC323 TTL 三态输出八位双向移位/存贮寄存器74HC33 TTL 开路输出2输入端四或非缓冲器74HC347 TTL BCD—7段译码器/驱动器74HC352 TTL 双4选1数据选择器/复工器74HC353 TTL 三态输出双4选1数据选择器/复工器74HC365 TTL 门使能输入三态输出六同相线驱动器74HC365 TTL 门使能输入三态输出六同相线驱动器74HC366 TTL 门使能输入三态输出六反相线驱动器74HC367 TTL 4/2线使能输入三态六同相线驱动器74HC368 TTL 4/2线使能输入三态六反相线驱动器74HC37 TTL 开路输出2输入端四与非缓冲器74HC373 TTL 三态同相八D锁存器74HC374 TTL 三态反相八D锁存器74HC375 TTL 4位双稳态锁存器74HC377 TTL 单边输出公共使能八D锁存器74HC378 TTL 单边输出公共使能六D锁存器74HC379 TTL 双边输出公共使能四D锁存器74HC38 TTL 开路输出2输入端四与非缓冲器74HC380 TTL 多功能八进制寄存器74HC39 TTL 开路输出2输入端四与非缓冲器74HC390 TTL 双十进制计数器74HC393 TTL 双四位二进制计数器74HC40 TTL 4输入端双与非缓冲器74HC42 TTL BCD—十进制代码转换器74HC352 TTL 双4选1数据选择器/复工器74HC353 TTL 三态输出双4选1数据选择器/复工器74HC365 TTL 门使能输入三态输出六同相线驱动器74HC366 TTL 门使能输入三态输出六反相线驱动器74HC367 TTL 4/2线使能输入三态六同相线驱动器74HC368 TTL 4/2线使能输入三态六反相线驱动器74HC37 TTL 开路输出2输入端四与非缓冲器74HC373 TTL 三态同相八D锁存器74HC374 TTL 三态反相八D锁存器74375 TTL 4位双稳态锁存器74377 TTL 单边输出公共使能八D锁存器74378 TTL 单边输出公共使能六D锁存器74379 TTL 双边输出公共使能四D锁存器7438 TTL 开路输出2输入端四与非缓冲器74380 TTL 多功能八进制寄存器7439 TTL 开路输出2输入端四与非缓冲器74390 TTL 双十进制计数器74393 TTL 双四位二进制计数器7440 TTL 4输入端双与非缓冲器7442 TTL BCD—十进制代码转换器74447 TTL BCD—7段译码器/驱动器7445 TTL BCD—十进制代码转换/驱动器74450 TTL 16:1多路转接复用器多工器74451 TTL 双8:1多路转接复用器多工器74453 TTL 四4:1多路转接复用器多工器7446 TTL BCD—7段低有效译码/驱动器74460 TTL 十位比较器74461 TTL 八进制计数器74465 TTL 三态同相2与使能端八总线缓冲器74466 TTL 三态反相2与使能八总线缓冲器74467 TTL 三态同相2使能端八总线缓冲器74468 TTL 三态反相2使能端八总线缓冲器74469 TTL 八位双向计数器7447 TTL BCD—7段高有效译码/驱动器7448 TTL BCD—7段译码器/内部上拉输出驱动74490 TTL 双十进制计数器74491 TTL 十位计数器74498 TTL 八进制移位寄存器7450 TTL 2-3/2-2输入端双与或非门74502 TTL 八位逐次逼近寄存器74503 TTL 八位逐次逼近寄存器7451 TTL 2-3/2-2输入端双与或非门74533 TTL 三态反相八D锁存器74534 TTL 三态反相八D锁存器7454 TTL 四路输入与或非门74540 TTL 八位三态反相输出总线缓冲器7455 TTL 4输入端二路输入与或非门74563 TTL 八位三态反相输出触发器74564 TTL 八位三态反相输出D触发器74573 TTL 八位三态输出触发器74574 TTL 八位三态输出D触发器74645 TTL 三态输出八同相总线传送接收器74670 TTL 三态输出4×4寄存器堆7473 TTL 带清除负触发双J-K触发器7474 TTL 带置位复位正触发双D触发器7476 TTL 带预置清除双J-K触发器7483 TTL 四位二进制快速进位全加器7485 TTL 四位数字比较器7486 TTL 2输入端四异或门7490 TTL 可二/五分频十进制计数器7493 TTL 可二/八分频二进制计数器7495 TTL 四位并行输入\输出移位寄存器7497 TTL 6位同步二进制乘法器注：同型号的74系列、74HC系列、74LS系列芯片，逻辑功能上是一样的。

STMICROELECTRONICS M74HC00 数据手册

1/8July 2001sHIGH SPEED:t PD = 8ns (TYP .) at V CC = 6V sLOW POWER DISSIPATION:I CC = 1µA(MAX.) at T A =25°C sHIGH NOISE IMMUNITY:V NIH = V NIL = 28 % V CC (MIN.)sSYMMETRICAL OUTPUT IMPEDANCE:|I OH | = I OL = 4mA (MIN)sBALANCED PROPAGATION DELAYS:t PLH ≅ t PHLsWIDE OPERATING VOLTAGE RANGE:V CC (OPR) = 2V to 6VsPIN AND FUNCTION COMPATIBLE WITH 74 SERIES 00DESCRIPTIONThe M74HC00 is an high speed CMOS QUAD 2-INPUT NAND GATE fabricated with silicon gate C 2MOS technology.The internal circuit is composed of 3 stages including buffer output, which enables high noise immunity and stable output.All inputs are equipped with protection circuits against static discharge and transient excess voltage.M74HC00QUAD 2-INPUT NAND GATEPIN CONNECTION AND IEC LOGIC SYMBOLSORDER CODESPACKAGE TUBE T & R DIP M74HC00B1R SOP M74HC00M1RM74HC00RM13TR TSSOPM74HC00TTRM74HC002/8INPUT AND OUTPUT EQUIVALENT CIRCUITPIN DESCRIPTIONTRUTH TABLEABSOLUTE MAXIMUM RATINGSAbsolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied(*) 500mW at 65 °C; derate to 300mW by 10mW/°C from 65°C to 85°CRECOMMENDED OPERATING CONDITIONSPIN No SYMBOL NAME AND FUNCTION 1, 4, 9, 121A to 4A Data Inputs 2, 5, 10, 131B to 4B Data Inputs 3, 6, 8, 111Y to 4Y Data Outputs 7GND Ground (0V)14V CCPositive Supply VoltageA B Y L L H L H H H L H HHLSymbol ParameterValue Unit V CC Supply Voltage -0.5 to +7V V I DC Input Voltage -0.5 to V CC + 0.5V V O DC Output Voltage -0.5 to V CC + 0.5V I IK DC Input Diode Current ± 20mA I OK DC Output Diode Current ± 20mA I ODC Output Current± 25mA I CC or I GND DC V CC or Ground Current± 50mA P D Power Dissipation500(*)mW T stg Storage Temperature -65 to +150°C T LLead Temperature (10 sec)300°CSymbol ParameterValue Unit V CC Supply Voltage 2 to 6V V I Input Voltage 0 to V CC V V O Output Voltage 0 to V CC V T op Operating Temperature -55 to 125°C t r , t fInput Rise and Fall TimeV CC = 2.0V 0 to 1000ns V CC = 4.5V 0 to 500ns V CC = 6.0V0 to 400nsM74HC003/8DC SPECIFICATIONSAC ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = t f = 6ns)CAPACITIVE CHARACTERISTICS1) C PD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. I CC(opr) = C PD x V CC x f IN + I CC /4 (per gate)SymbolParameterTest ConditionValue UnitV CC (V)T A = 25°C -40 to 85°C -55 to 125°C Min.Typ.Max.Min.Max.Min.Max.V IHHigh Level Input Voltage2.0 1.5 1.5 1.5V 4.53.15 3.15 3.156.04.24.24.2V ILLow Level Input Voltage2.00.50.50.5V4.5 1.35 1.35 1.356.0 1.81.81.8V OHHigh Level Output Voltage2.0I O =-20 µA 1.9 2.0 1.9 1.9V4.5I O =-20 µA 4.4 4.5 4.4 4.46.0I O =-20 µA5.96.0 5.9 5.94.5I O =-4.0 mA 4.18 4.31 4.13 4.106.0I O =-5.2 mA 5.685.8 5.635.60V OLLow Level Output Voltage2.0I O =20 µA 0.00.10.10.1V 4.5I O =20 µA 0.00.10.10.16.0I O =20 µA 0.00.10.10.14.5I O =4.0 mA 0.170.260.330.406.0I O =5.2 mA 0.180.260.330.40I I Input Leakage Current6.0V I = V CC or GND ± 0.1± 1± 1µA I CCQuiescent Supply Current6.0V I = V CC or GND11020µA SymbolParameterTest ConditionValue UnitV CC (V)T A = 25°C -40 to 85°C -55 to 125°C Min.Typ.Max.Min.Max.Min.Max.t TLH t THL Output TransitionTime 2.0307595110ns 4.581519226.07131619t PLH t PHL Propagation DelayTime2.027*******ns4.591519226.08131619SymbolParameterTest ConditionValue UnitV CC (V)T A = 25°C -40 to 85°C -55 to 125°C Min.Typ.Max.Min.Max.Min.Max.C IN Input Capacitance 5.05101010pF C PDPower Dissipation Capacitance (note 1)5.020pFM74HC004/8TEST CIRCUITL R T = Z OUT of pulse generator (typically 50Ω)WAVEFORM : PROPAGATION DELAY TIMES(f=1MHz; 50% duty cycle)M74HC00Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.© The ST logo is a registered trademark of STMicroelectronics© 2001 STMicroelectronics - Printed in Italy - All Rights ReservedSTMicroelectronics GROUP OF COMPANIESAustralia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - MoroccoSingapore - Spain - Sweden - Switzerland - United Kingdom© 8/8。

74系列芯片详细功能介绍

74系列数数字电路7400、74H00、74L00、74LS00、74S00、74HC00、74C00、74F00、74ALS00四2输入与非门Y=\AB。

7401、74LS01、74HC01、74ALS01四2输入与非门(OCY=\AB。

7402、74L02、74LS02、74S02、74HC02、74C02、74ALS02、74F02四2输入或非门。

Y=/A+B。

7403、74L03、74LS03、74ALS03、74S03、74HC037404、74H04、74L04、74S04、74HC04、74C04、74F04、74ALS04六反相器Y=/A。

7405、74H05、74LS05、74S05、74HC05、74F05、74ALS05六反相器(OCY=/A。

7406、74LS06六反相缓冲器/驱动器(OC、高压输出Y=/A;是7405高耐压输出型,耐压30V。

7407、74LS07、74HC07六缓冲器/驱动器(OC、高压输出Y=A; 30V耐高压输出。

7408、74LS08、74F08、74ALS08、74S08、74HC08、74C08四2输入与门Y=AB。

7409、74LS09、74F09、74ALS09、74S09、74HC09四2输入与门(OC Y=AB。

7410、74H10、74L10、74LS10、74ALS10、74S10、74HC10、74C10 74H11、74LS11、74S11、74F11、74ALS11、74HC11三3输入与门Y=ABC。

7412、74LS12、74ALS12三3输入与非门(OCY=\ABC。

7413、74LS13双4输入与非门Y=\ABCD。

7414、74LS14、74HC14、74C1474H15、74LS15、74ALS15、74S15三3输入与门(OCY=ABC。

7416、74LS16六反相缓冲器/驱动器Y=/A;7417、74LS17六缓冲器/驱动器(OC、高压输出Y=A;15V耐压输出。

74HC00中文资料_数据手册_参数

IO = −20 µA
2.0
IO = −20 µA
4.5
IO = −20 µA
6.0
IO = −4.0 mA
4.5
IO = −5.2 mA
6.0
VOL
LOW-level output voltage VI = VIH or VIL
IO = 20 µA
2.0
IO = 20 µA
4.5
IO = 20 µA
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC VI VO Tamb
supply voltage input voltage output voltage operating ambient temperature
tr, tf
input rise and fall times
74HC00; 74HCT00
handbook, halfpage
1B 2
1A VCC 1 14
13 4B
1Y 3
12 4A
2A 4 2B 5
GND(1)
11 4Y 10 3B
2Y 6 78
Top view GND 3Y
9 3A
MNA950
handbook, halfpage A B
Y
MNA211
(1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input.
6.0
IO = 4.0 mA

CD74HC00系列芯片英文手册

Data sheet acquired from Harris Semiconductor SCHS116C Features •Buffered Inputs •Typical Propagation Delay: 7ns at V CC = 5V ,C L = 15pF, T A = 25o C •Fanout (Over Temperature Range)-Standard Outputs. . . . . . . . . . . . . . .10 LSTTL Loads-Bus Driver Outputs . . . . . . . . . . . . .15 LSTTL Loads•Wide Operating Temperature Range . . .-55o C to 125o C•Balanced Propagation Delay and Transition Times•Signiﬁcant Power Reduction Compared to LSTTLLogic ICs•Alternate Source is Philips/Signetics•HC Types-2V to 6V Operation-High Noise Immunity: N IL = 30%, N IH = 30% of V CC at V CC = 5V•HCT Types- 4.5V to 5.5V Operation-Direct LSTTL Input Logic Compatibility,V IL = 0.8V (Max), V IH = 2V (Min)-CMOS Input Compatibility, I l ≤1µA at V OL , V OH DescriptionThe CD54HC00,CD74HC00,CD54HCT00,andCD74HCT00logic gates utilize silicon gate CMOStechnology to achieve operating speeds similar to LSTTLgates with the low power consumption of standard CMOSintegrated circuits.All devices have the ability to drive 10LSTTL loads.The 74HCT logic family is functionally pincompatible with the standard 74LS logic family.PinoutCD54HC00, CD54HCT00,(CERDIP)CD74HC00, CD74HCT00(PDIP , SOIC)TOP VIEWOrdering Information PART NUMBER TEMP. RANGE (o C)PACKAGE CD54HC00F3A -55 to 12514 Ld CERDIP CD54HCT00F3A -55 to 12514 Ld CERDIP CD74HC00E -55 to 12514 Ld PDIP CD74HC00M -55 to 12514 Ld SOIC CD74HC00MT -55 to 12514 Ld SOIC CD74HC00M96-55 to 12514 Ld SOIC CD74HCT00E -55 to 12514 Ld PDIP CD74HCT00M -55 to 12514 Ld SOIC CD74HCT00MT -55 to 12514 Ld SOIC CD74HCT00M96-55 to 12514 Ld SOICNOTE:When ordering,use the entire part number.The sufﬁx 96denotes tape and reel.The sufﬁx T denotes a small-quantity reelof 250.1A 1B 1Y 2A 2B 2Y GND V CC 4B 4A 4Y 3B 3A 3Y1234567141312111098January 1998 - Revised September 2003CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.CD54HC00, CD74HC00,CD54HCT00, CD74HCT00High-Speed CMOS LogicQuad 2-Input NAND GateFunctional DiagramLogic SymbolTRUTH TABLEINPUTS OUTPUT nA nB nYL L HL H HH L HH H L1A1B2A2B2YGND12345614131211V CC4Y3Y3B4A4B108793A1YnAnBnYAbsolute Maximum Ratings Thermal InformationDC Supply Voltage, V CC. . . . . . . . . . . . . . . . . . . . . . . .-0.5V to 7V DC Input Diode Current, I IKFor V I < -0.5V or V I > V CC + 0.5V. . . . . . . . . . . . . . . . . . . . . .±20mA DC Output Diode Current, I OKFor V O < -0.5V or V O > V CC + 0.5V . . . . . . . . . . . . . . . . . . . .±20mA DC Output Source or Sink Current per Output Pin, I OFor V O > -0.5V or V O < V CC + 0.5V . . . . . . . . . . . . . . . . . . . .±25mA DC V CC or Ground Current, I CC or I GND. . . . . . . . . . . . . . . . . .±50mA Operating ConditionsTemperature Range (T A) . . . . . . . . . . . . . . . . . . . . .-55o C to 125o C Supply Voltage Range, V CCHC T ypes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to 6V HCT T ypes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V DC Input or Output Voltage, V I, V O . . . . . . . . . . . . . . . . .0V to V CC Input Rise and Fall Time2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000ns (Max) 4.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500ns (Max) 6V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .400ns (Max)Thermal Resistance (T ypical, Note 1)θJA (o C/W) E (PDIP) Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 M (SOIC) Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 Maximum Junction T emperature (Hermetic Package or Die) . . .175o C Maximum Junction T emperature (Plastic Package). . . . . . . .150o C Maximum Storage Temperature Range . . . . . . . . . .-65o C to 150o C Maximum Lead T emperature (Soldering 10s). . . . . . . . . . . . .300o C (SOIC - Lead Tips Only)CAUTION:Stresses above those listed in“Absolute Maximum Ratings”may cause permanent damage to the device.This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this speciﬁcation is not implied.NOTE:1.The package thermal impedance is calculated in accordance with JESD 51-7.DC Electrical SpeciﬁcationsPARAMETER SYMBOLTESTCONDITIONSV CC (V)25o C-40o C TO 85o C-55o C TO 125o CUNITS V I(V)I O(mA)MIN TYP MAX MIN MAX MIN MAXHC TYPESHigh Level Input Voltage V IH--2 1.5-- 1.5- 1.5-V4.5 3.15-- 3.15 - 3.15-V6 4.2-- 4.2- 4.2-VLow Level Input Voltage V IL--2--0.5-0.5-0.5V4.5-- 1.35- 1.35- 1.35V6-- 1.8- 1.8- 1.8VHigh Level Output VoltageCMOS Loads V OH V IH orV IL-0.022 1.9-- 1.9- 1.9-V-0.02 4.5 4.4-- 4.4 - 4.4-V-0.026 5.9-- 5.9- 5.9-VHigh Level Output VoltageTTL Loads---------V -4 4.5 3.98-- 3.84- 3.7-V -5.26 5.48-- 5.34- 5.2-VLow Level Output VoltageCMOS Loads V OL V IH orV IL0.022--0.1-0.1-0.1V0.02 4.5--0.1-0.1-0.1V0.026--0.1-0.1-0.1VLow Level Output VoltageTTL Loads---------V4 4.5--0.26-0.33-0.4V5.26--0.26-0.33-0.4VInput Leakage Current I I V CC orGND-6--±0.1-±1-±1µAQuiescent DeviceCurrentI CC V CC or GND 06--2-20-40µA HCT TYPESHigh Level InputVoltageV IH -- 4.5 to 5.52--2-2-V Low Level InputVoltageV IL -- 4.5 to 5.5--0.8-0.8-0.8V High Level OutputVoltageCMOS LoadsV OH V IH or V IL - 0.02 4.5 4.4-- 4.4- 4.4-V High Level OutputVoltageTTL Loads- 4 4.5 3.98-- 3.84- 3.7-V Low Level OutputVoltage CMOS LoadsV OL V IH or V IL 0.02 4.5--0.1-0.1-0.1V Low Level OutputVoltageTTL Loads4 4.5--0.26-0.33-0.4V Input LeakageCurrentI I V CC and GND - 5.5-±0.1-±1-±1µA Quiescent DeviceCurrentI CC V CC or GND 0 5.5--2-20-40µA Additional QuiescentDevice Current PerInput Pin: 1 Unit Load∆I CC (Note 2)V CC - 2.1- 4.5 to 5.5-100360-450-490µANOTE:2.For dual-supply systems theorectical worst case (V I = 2.4V, V CC = 5.5V) specification is 1.8mA.DC Electrical Speciﬁcations (Continued)PARAMETERSYMBOL TESTCONDITIONSV CC (V)25o C -40o C TO 85o C -55o C TO 125o C UNITS V I (V)I O (mA)MIN TYP MAX MIN MAX MIN MAX HCT Input Loading TableINPUTUNIT LOADS nA1.8nB 1.1NOTE:Unit Load is ∆I CC limit speciﬁed in DC Electrical Speciﬁca-tions table, e.g. 360µA max at 25o C.Switching Speciﬁcations Input t r , t f = 6nsPARAMETERSYMBOL TEST CONDITIONS V CC (V)25o C -40o C TO 85o C -55o C TO 125o C UNITSMIN TYP MAX MIN MAX MIN MAX HC TYPESPropagation Delay,Input to Output (Figure 1)t PLH , t PHL C L = 50pF 2--90-115-135ns 4.5--18-23-27ns 6--15-20-23ns Propagation Delay,Data Input toOutput Y t PLH , t PHL C L = 15pF 5-7-----pFTransition Times (Figure 1)t TLH , t THL C L = 50pF 2--75-9518110ns 4.5--15-19-22ns 6--13-16-19ns Input CapacitanceC I ----10-10-10pF Power Dissipation Capacitance(Notes 3, 4)C PD -5-25-----pFHCT TYPESPropagation Delay, Input toOutput (Figure 2)t PLH , t PHL C L = 50pF 4.5--20-25-30ns Propagation Delay,Data Input toOutput Yt PLH , t PHL C L = 15pF 5-8-----pF Transition Times (Figure 2)t TLH , t THL C L = 50pF 4.5--15-19-22ns Input CapacitanceC I ----10-10-10pF Power Dissipation Capacitance(Notes 3, 4)C PD -5-25-----pF NOTES:3.C PD is used to determine the dynamic power consumption, per gate.4.P D = V CC 2 f i (C PD + C L ) where f i = input frequency, C L = output load capacitance, V CC = supply voltage.Switching Speciﬁcations Input t r , t f = 6ns (Continued)PARAMETERSYMBOL TEST CONDITIONS V CC (V)25o C -40o C TO 85o C -55o C TO 125o C UNITS MIN TYP MAX MIN MAX MIN MAX Test Circuits and WaveformsFIGURE 1.HC AND HCU TRANSITION TIMES AND PROPAGA-TION DELAY TIMES, COMBINATION LOGIC FIGURE 2.HCT TRANSITION TIMES AND PROPAGATION DELAY TIMES, COMBINATION LOGICt PHL t PLH t THL t TLH90%50%10%50%10%INVERTING OUTPUTINPUT GND V CC t r = 6nst f = 6ns 90%t PHL t PLH t THL t TLH 2.7V 1.3V 0.3V 1.3V 10%INVERTING OUTPUT INPUT GND 3V t r = 6ns t f = 6ns 90%INPUT LEVEL HC TYPESHCT TYPES V CC 3VV S 50% V CC1.3V NOTE:Transition times and propagation delay times.PACKAGING INFORMATION Orderable DeviceStatus (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)5962-8683101CAACTIVE CDIP J 141None Call TI Level-NC-NC-NC CD54HC00FACTIVE CDIP J 141None Call TI Level-NC-NC-NC CD54HC00F3AACTIVE CDIP J 141None Call TI Level-NC-NC-NC CD54HCT00FACTIVE CDIP J 141None Call TI Level-NC-NC-NC CD54HCT00F3AACTIVE CDIP J 141None Call TI Level-NC-NC-NC CD74HC00EACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC CD74HC00MACTIVE SOIC D 1450Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM CD74HC00M96ACTIVE SOIC D 142500Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM CD74HC00MTACTIVE SOIC D 14250Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM CD74HCT00EACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC CD74HCT00MACTIVE SOIC D 1450Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM CD74HCT00M96ACTIVE SOIC D 142500Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM CD74HCT00MTACTIVE SOIC D 14250Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -May not be currently available -please check /productcontent for the latest availability information and additional product content details.None:Not yet available Lead (Pb-Free).Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean "Pb-Free"and in addition,uses package materials that do not contain halogens,including bromine (Br)or antimony (Sb)above 0.1%of total product weight.(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.PACKAGE OPTION ADDENDUM 28-Feb-2005Addendum-Page 1IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。

74HC00(芯片资料)

Molded Dual-In Line Package (N) Order Number MM74HC00N NS Package N14A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION As used herein 1 Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user
VIN e VIH lIOUTl s4 0 mA lIOUTl s5 2 mA IIN ICC Maximum Input Current Maximum Quiescent Supply Current VIN e VCC or GND VIN e VCC or GND IOUT e 0 mA

74hc00 74ls00 系列集成电路型号功能表

74HC00 、74LS00 系列集成电路型号功能表74HC00 TTL 2输入端四与非门74HC01 TTL 集电极开路2输入端四与非门74HC02 TTL 2输入端四或非门74HC03 TTL 集电极开路2输入端四与非门74HC04 TTL 六反相器74HC05 TTL 集电极开路六反相器74HC06 TTL 集电极开路六反相高压驱动器74HC07 TTL 集电极开路六正相高压驱动器74HC08 TTL 2输入端四与门74HC09 TTL 集电极开路2输入端四与门74HC10 TTL 3输入端3与非门74HC107 TTL 带清除主从双J-K触发器74HC109 TTL 带预置清除正触发双J-K触发器74HC11 TTL 3输入端3与门74HC112 TTL 带预置清除负触发双J-K触发器74HC12 TTL 开路输出3输入端三与非门74HC121 TTL 单稳态多谐振荡器74HC122 TTL 可再触发单稳态多谐振荡器74HC123 TTL 双可再触发单稳态多谐振荡器74HC125 TTL 三态输出高有效四总线缓冲门74HC126 TTL 三态输出低有效四总线缓冲门74HC13 TTL 4输入端双与非施密特触发器74HC132 TTL 2输入端四与非施密特触发器74HC133 TTL 13输入端与非门74HC136 TTL 四异或门74HC138 TTL 3-8线译码器/复工器74HC139 TTL 双2-4线译码器/复工器74HC14 TTL 六反相施密特触发器74HC145 TTL BCD—十进制译码/驱动器74HC15 TTL 开路输出3输入端三与门74HC150 TTL 16选1数据选择/多路开关74HC151 TTL 8选1数据选择器74HC153 TTL 双4选1数据选择器74HC154 TTL 4线—16线译码器74HC155 TTL 图腾柱输出译码器/分配器74HC156 TTL 开路输出译码器/分配器74HC157 TTL 同相输出四2选1数据选择器74HC158 TTL 反相输出四2选1数据选择器74HC16 TTL 开路输出六反相缓冲/驱动器74HC160 TTL 可预置BCD异步清除计数器74HC161 TTL 可予制四位二进制异步清除计数器74HC162 TTL 可预置BCD同步清除计数器74HC163 TTL 可予制四位二进制同步清除计数器74HC164 TTL 八位串行入/并行输出移位寄存器74HC165 TTL 八位并行入/串行输出移位寄存器74HC166 TTL 八位并入/串出移位寄存器74HC169 TTL 二进制四位加/减同步计数器74HC17 TTL 开路输出六同相缓冲/驱动器74HC170 TTL 开路输出4×4寄存器堆74HC173 TTL 三态输出四位D型寄存器74HC174HC TTL 带公共时钟和复位六D触发器74HC175 TTL 带公共时钟和复位四D触发器74HC180 TTL 9位奇数/偶数发生器/校验器74HC181 TTL 算术逻辑单元/函数发生器74HC185 TTL 二进制—BCD代码转换器74HC190 TTL BCD同步加/减计数器74HC191 TTL 二进制同步可逆计数器74HC192 TTL 可预置BCD双时钟可逆计数器74HC193 TTL 可预置四位二进制双时钟可逆计数器74HC194 TTL 四位双向通用移位寄存器74HC195 TTL 四位并行通道移位寄存器74HC196 TTL 十进制/二-十进制可预置计数锁存器74HC197 TTL 二进制可预置锁存器/计数器74HC20 TTL 4输入端双与非门74HC21 TTL 4输入端双与门74HC22 TTL 开路输出4输入端双与非门74HC221 TTL 双/单稳态多谐振荡器74HC240 TTL 八反相三态缓冲器/线驱动器74HC241 TTL 八同相三态缓冲器/线驱动器74HC243 TTL 四同相三态总线收发器74HC244 TTL 八同相三态缓冲器/线驱动器74HC245 TTL 八同相三态总线收发器74HC247 TTL BCD—7段15V输出译码/驱动器74HC248 TTL BCD—7段译码/升压输出驱动器74HC249 TTL BCD—7段译码/开路输出驱动器74HC251 TTL 三态输出8选1数据选择器/复工器74HC253 TTL 三态输出双4选1数据选择器/复工器74HC256 TTL 双四位可寻址锁存器74HC257 TTL 三态原码四2选1数据选择器/复工器74HC258 TTL 三态反码四2选1数据选择器/复工器74HC259 TTL 八位可寻址锁存器/3-8线译码器74HC26 TTL 2输入端高压接口四与非门74HC260 TTL 5输入端双或非门74HC266 TTL 2输入端四异或非门74HC27 TTL 3输入端三或非门74HC273 TTL 带公共时钟复位八D触发器74HC279 TTL 四图腾柱输出S-R锁存器74HC28 TTL 2输入端四或非门缓冲器74HC283 TTL 4位二进制全加器74HC290 TTL 二/五分频十进制计数器74HC293 TTL 二/八分频四位二进制计数器74HC295 TTL 四位双向通用移位寄存器74HC298 TTL 四2输入多路带存贮开关74HC299 TTL 三态输出八位通用移位寄存器74HC30 TTL 8输入端与非门74HC32 TTL 2输入端四或门74HC322 TTL 带符号扩展端八位移位寄存器74HC323 TTL 三态输出八位双向移位/存贮寄存器74HC33 TTL 开路输出2输入端四或非缓冲器74HC347 TTL BCD—7段译码器/驱动器74HC352 TTL 双4选1数据选择器/复工器74HC353 TTL 三态输出双4选1数据选择器/复工器74HC365 TTL 门使能输入三态输出六同相线驱动器74HC365 TTL 门使能输入三态输出六同相线驱动器74HC366 TTL 门使能输入三态输出六反相线驱动器74HC367 TTL 4/2线使能输入三态六同相线驱动器74HC368 TTL 4/2线使能输入三态六反相线驱动器74HC37 TTL 开路输出2输入端四与非缓冲器74HC373 TTL 三态同相八D锁存器74HC374 TTL 三态反相八D锁存器74HC375 TTL 4位双稳态锁存器74HC377 TTL 单边输出公共使能八D锁存器74HC378 TTL 单边输出公共使能六D锁存器74HC379 TTL 双边输出公共使能四D锁存器74HC38 TTL 开路输出2输入端四与非缓冲器74HC380 TTL 多功能八进制寄存器74HC39 TTL 开路输出2输入端四与非缓冲器74HC390 TTL 双十进制计数器74HC393 TTL 双四位二进制计数器74HC40 TTL 4输入端双与非缓冲器74HC42 TTL BCD—十进制代码转换器74HC352 TTL 双4选1数据选择器/复工器74HC353 TTL 三态输出双4选1数据选择器/复工器74HC365 TTL 门使能输入三态输出六同相线驱动器74HC366 TTL 门使能输入三态输出六反相线驱动器74HC367 TTL 4/2线使能输入三态六同相线驱动器74HC368 TTL 4/2线使能输入三态六反相线驱动器74HC37 TTL 开路输出2输入端四与非缓冲器74HC373 TTL 三态同相八D锁存器74HC374 TTL 三态反相八D锁存器74375 TTL 4位双稳态锁存器74377 TTL 单边输出公共使能八D锁存器74378 TTL 单边输出公共使能六D锁存器74379 TTL 双边输出公共使能四D锁存器7438 TTL 开路输出2输入端四与非缓冲器74380 TTL 多功能八进制寄存器7439 TTL 开路输出2输入端四与非缓冲器74390 TTL 双十进制计数器74393 TTL 双四位二进制计数器7440 TTL 4输入端双与非缓冲器7442 TTL BCD—十进制代码转换器74447 TTL BCD—7段译码器/驱动器7445 TTL BCD—十进制代码转换/驱动器74450 TTL 16:1多路转接复用器多工器74451 TTL 双8:1多路转接复用器多工器74453 TTL 四4:1多路转接复用器多工器7446 TTL BCD—7段低有效译码/驱动器74460 TTL 十位比较器74461 TTL 八进制计数器74465 TTL 三态同相2与使能端八总线缓冲器74466 TTL 三态反相2与使能八总线缓冲器74467 TTL 三态同相2使能端八总线缓冲器74468 TTL 三态反相2使能端八总线缓冲器74469 TTL 八位双向计数器7447 TTL BCD—7段高有效译码/驱动器7448 TTL BCD—7段译码器/内部上拉输出驱动74490 TTL 双十进制计数器74491 TTL 十位计数器74498 TTL 八进制移位寄存器7450 TTL 2-3/2-2输入端双与或非门74502 TTL 八位逐次逼近寄存器74503 TTL 八位逐次逼近寄存器7451 TTL 2-3/2-2输入端双与或非门74533 TTL 三态反相八D锁存器74534 TTL 三态反相八D锁存器7454 TTL 四路输入与或非门74540 TTL 八位三态反相输出总线缓冲器7455 TTL 4输入端二路输入与或非门74563 TTL 八位三态反相输出触发器74564 TTL 八位三态反相输出D触发器74573 TTL 八位三态输出触发器74574 TTL 八位三态输出D触发器74645 TTL 三态输出八同相总线传送接收器74670 TTL 三态输出4×4寄存器堆7473 TTL 带清除负触发双J-K触发器7474 TTL 带置位复位正触发双D触发器7476 TTL 带预置清除双J-K触发器7483 TTL 四位二进制快速进位全加器7485 TTL 四位数字比较器7486 TTL 2输入端四异或门7490 TTL 可二/五分频十进制计数器7493 TTL 可二/八分频二进制计数器7495 TTL 四位并行输入\输出移位寄存器7497 TTL 6位同步二进制乘法器注：同型号的74系列、74HC系列、74LS系列芯片，逻辑功能上是一样的。

74LS系列 74hc系列 CD系列芯片功能

74LS系列芯片功能反相器驱动器LS04 LS05 LS06 LS07 LS125 LS240 LS244 LS245 与门与非门LS00 LS08 LS10 LS11 LS20 LS21 LS27 LS30 LS38 或门或非门与或非门LS02 LS32 LS51 LS64 LS65异或门比较器LS86译码器LS138 LS139寄存器LS74 LS175 LS37374系列：：74LS00 TTL 2输入端四与非门74LS01 TTL 集电极开路2输入端四与非门74LS02 TTL 2输入端四或非门74LS03 TTL 集电极开路2输入端四与非门74LS04 TTL 六反相器74LS05 TTL 集电极开路六反相器74LS06 TTL 集电极开路六反相高压驱动器74LS07 TTL 集电极开路六正相高压驱动器74LS08 TTL 2输入端四与门74LS09 TTL 集电极开路2输入端四与门74LS10 TTL 3输入端3与非门74LS107 TTL 带清除主从双J-K触发器74LS109 TTL 带预置清除正触发双J-K触发器74LS11 TTL 3输入端3与门74LS112 TTL 带预置清除负触发双J-K触发器74LS12 TTL 开路输出3输入端三与非门74LS121 TTL 单稳态多谐振荡器74LS122 TTL 可再触发单稳态多谐振荡器74LS123 TTL 双可再触发单稳态多谐振荡器74LS125 TTL 三态输出高有效四总线缓冲门74LS126 TTL 三态输出低有效四总线缓冲门74LS13 TTL 4输入端双与非施密特触发器74LS132 TTL 2输入端四与非施密特触发器74LS133 TTL 13输入端与非门74LS136 TTL 四异或门74LS138 TTL 3-8线译码器/复工器74LS139 TTL 双2-4线译码器/复工器74LS14 TTL 六反相施密特触发器74LS145 TTL BCD—十进制译码/驱动器74LS15 TTL 开路输出3输入端三与门74LS150 TTL 16选1数据选择/多路开关74LS151 TTL 8选1数据选择器74LS153 TTL 双4选1数据选择器74LS154 TTL 4线—16线译码器74LS155 TTL 图腾柱输出译码器/分配器74LS156 TTL 开路输出译码器/分配器74LS157 TTL 同相输出四2选1数据选择器74LS158 TTL 反相输出四2选1数据选择器74LS16 TTL 开路输出六反相缓冲/驱动器74LS160 TTL 可预置BCD异步清除计数器74LS161 TTL 可予制四位二进制异步清除计数器74LS162 TTL 可预置BCD同步清除计数器74LS163 TTL 可予制四位二进制同步清除计数器74LS164 TTL 八位串行入/并行输出移位寄存器74LS165 TTL 八位并行入/串行输出移位寄存器74LS166 TTL 八位并入/串出移位寄存器74LS169 TTL 二进制四位加/减同步计数器74LS17 TTL 开路输出六同相缓冲/驱动器74LS170 TTL 开路输出4×4寄存器堆74LS173 TTL 三态输出四位D型寄存器74LS174 TTL 带公共时钟和复位六D触发器74LS175 TTL 带公共时钟和复位四D触发器74LS180 TTL 9位奇数/偶数发生器/校验器74LS181 TTL 算术逻辑单元/函数发生器74LS185 TTL 二进制—BCD代码转换器74LS190 TTL BCD同步加/减计数器74LS191 TTL 二进制同步可逆计数器74LS192 TTL 可预置BCD双时钟可逆计数器74LS193 TTL 可预置四位二进制双时钟可逆计数器74LS194 TTL 四位双向通用移位寄存器74LS195 TTL 四位并行通道移位寄存器74LS196 TTL 十进制/二-十进制可预置计数锁存器74LS197 TTL 二进制可预置锁存器/计数器74LS20 TTL 4输入端双与非门74LS21 TTL 4输入端双与门74LS22 TTL 开路输出4输入端双与非门74LS221 TTL 双/单稳态多谐振荡器74LS240 TTL 八反相三态缓冲器/线驱动器74LS241 TTL 八同相三态缓冲器/线驱动器74LS243 TTL 四同相三态总线收发器74LS244 TTL 八同相三态缓冲器/线驱动器74LS245 TTL 八同相三态总线收发器74LS247 TTL BCD—7段15V输出译码/驱动器74LS248 TTL BCD—7段译码/升压输出驱动器74LS249 TTL BCD—7段译码/开路输出驱动器74LS251 TTL 三态输出8选1数据选择器/复工器74LS253 TTL 三态输出双4选1数据选择器/复工器74LS256 TTL 双四位可寻址锁存器74LS257 TTL 三态原码四2选1数据选择器/复工器74LS258 TTL 三态反码四2选1数据选择器/复工器74LS259 TTL 八位可寻址锁存器/3-8线译码器74LS26 TTL 2输入端高压接口四与非门74LS260 TTL 5输入端双或非门74LS266 TTL 2输入端四异或非门74LS27 TTL 3输入端三或非门74LS273 TTL 带公共时钟复位八D触发器74LS279 TTL 四图腾柱输出S-R锁存器74LS28 TTL 2输入端四或非门缓冲器74LS283 TTL 4位二进制全加器74LS290 TTL 二/五分频十进制计数器74LS293 TTL 二/八分频四位二进制计数器74LS295 TTL 四位双向通用移位寄存器74LS298 TTL 四2输入多路带存贮开关74LS299 TTL 三态输出八位通用移位寄存器74LS30 TTL 8输入端与非门74LS32 TTL 2输入端四或门74LS322 TTL 带符号扩展端八位移位寄存器74LS323 TTL 三态输出八位双向移位/存贮寄存器74LS33 TTL 开路输出2输入端四或非缓冲器74LS347 TTL BCD—7段译码器/驱动器74LS352 TTL 双4选1数据选择器/复工器74LS353 TTL 三态输出双4选1数据选择器/复工器74LS365 TTL 门使能输入三态输出六同相线驱动器74LS365 TTL 门使能输入三态输出六同相线驱动器74LS366 TTL 门使能输入三态输出六反相线驱动器74LS367 TTL 4/2线使能输入三态六同相线驱动器74LS368 TTL 4/2线使能输入三态六反相线驱动器74LS37 TTL 开路输出2输入端四与非缓冲器74LS373 TTL 三态同相八D锁存器74LS374 TTL 三态反相八D锁存器74LS375 TTL 4位双稳态锁存器74LS377 TTL 单边输出公共使能八D锁存器74LS378 TTL 单边输出公共使能六D锁存器74LS379 TTL 双边输出公共使能四D锁存器74LS38 TTL 开路输出2输入端四与非缓冲器74LS380 TTL 多功能八进制寄存器74LS39 TTL 开路输出2输入端四与非缓冲器74LS390 TTL 双十进制计数器74LS393 TTL 双四位二进制计数器74LS40 TTL 4输入端双与非缓冲器74LS42 TTL BCD—十进制代码转换器74LS352 TTL 双4选1数据选择器/复工器74LS353 TTL 三态输出双4选1数据选择器/复工器74LS365 TTL 门使能输入三态输出六同相线驱动器74LS366 TTL 门使能输入三态输出六反相线驱动器74LS367 TTL 4/2线使能输入三态六同相线驱动器74LS368 TTL 4/2线使能输入三态六反相线驱动器74LS37 TTL 开路输出2输入端四与非缓冲器74LS373 TTL 三态同相八D锁存器74LS374 TTL 三态反相八D锁存器74LS375 TTL 4位双稳态锁存器74LS377 TTL 单边输出公共使能八D锁存器74LS378 TTL 单边输出公共使能六D锁存器74LS379 TTL 双边输出公共使能四D锁存器74LS38 TTL 开路输出2输入端四与非缓冲器74LS380 TTL 多功能八进制寄存器74LS39 TTL 开路输出2输入端四与非缓冲器74LS390 TTL 双十进制计数器74LS393 TTL 双四位二进制计数器74LS40 TTL 4输入端双与非缓冲器74LS42 TTL BCD—十进制代码转换器74LS447 TTL BCD—7段译码器/驱动器74LS45 TTL BCD—十进制代码转换/驱动器74LS450 TTL 16:1多路转接复用器多工器74LS451 TTL 双8:1多路转接复用器多工器74LS453 TTL 四4:1多路转接复用器多工器74LS46 TTL BCD—7段低有效译码/驱动器74LS460 TTL 十位比较器74LS461 TTL 八进制计数器74LS465 TTL 三态同相2与使能端八总线缓冲器74LS466 TTL 三态反相2与使能八总线缓冲器74LS467 TTL 三态同相2使能端八总线缓冲器74LS468 TTL 三态反相2使能端八总线缓冲器74LS469 TTL 八位双向计数器74LS47 TTL BCD—7段高有效译码/驱动器74LS48 TTL BCD—7段译码器/内部上拉输出驱动74LS490 TTL 双十进制计数器74LS491 TTL 十位计数器74LS498 TTL 八进制移位寄存器74LS50 TTL 2-3/2-2输入端双与或非门74LS502 TTL 八位逐次逼近寄存器74LS503 TTL 八位逐次逼近寄存器74LS51 TTL 2-3/2-2输入端双与或非门74LS533 TTL 三态反相八D锁存器74LS534 TTL 三态反相八D锁存器74LS54 TTL 四路输入与或非门74LS540 TTL 八位三态反相输出总线缓冲器74LS55 TTL 4输入端二路输入与或非门74LS563 TTL 八位三态反相输出触发器74LS564 TTL 八位三态反相输出D触发器74LS573 TTL 八位三态输出触发器74LS574 TTL 八位三态输出D触发器74LS645 TTL 三态输出八同相总线传送接收器74LS670 TTL 三态输出4×4寄存器堆74LS73 TTL 带清除负触发双J-K触发器74LS74 TTL 带置位复位正触发双D触发器74LS76 TTL 带预置清除双J-K触发器74LS83 TTL 四位二进制快速进位全加器74LS85 TTL 四位数字比较器74LS86 TTL 2输入端四异或门74LS90 TTL 可二/五分频十进制计数器74LS93 TTL 可二/八分频二进制计数器74LS95 TTL 四位并行输入\输出移位寄存器74LS97 TTL 6位同步二进制乘法器反相器:Vcc 6A 6Y 5A 5Y 4A 4Y 六非门74LS04┌┴—┴—┴—┴—┴—┴—┴┐ 六非门(OC门) 74LS05 _ │14 13 12 11 10 9 8│ 六非门(OC高压输出) 74LS06 Y = A ）││ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1A 1Y 2A 2Y 3A 3Y GND驱动器:Vcc 6A 6Y 5A 5Y 4A 4Y┌┴—┴—┴—┴—┴—┴—┴┐│14 13 12 11 10 9 8│Y = A ）│ 六驱动器(OC高压输出) 74LS07│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1A 1Y 2A 2Y 3A 3Y GNDVcc -4C 4A 4Y -3C 3A 3Y┌┴—┴—┴—┴—┴—┴—┴┐_ │14 13 12 11 10 9 8│Y =A+C ）│ 四总线三态门74LS125│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘-1C 1A 1Y -2C 2A 2Y GNDVcc -G B1 B2 B3 B4 B8 B6 B7 B8┌┴—┴—┴—┴—┴—┴—┴—┴—┴—┴┐ 8位总线驱动器74LS245│20 19 18 17 16 15 14 13 12 11│）│ DIR=1 A=>B│ 1 2 3 4 5 6 7 8 9 10│ DIR=0 B=>A└┬—┬—┬—┬—┬—┬—┬—┬—┬—┬┘DIR A1 A2 A3 A4 A5 A6 A7 A8 GND页首非门,驱动器与门,与非门或门,或非门异或门,比较器译码器寄存器正逻辑与门,与非门:Vcc 4B 4A 4Y 3B 3A 3Y┌┴—┴—┴—┴—┴—┴—┴┐│14 13 12 11 10 9 8│Y = AB ）│ 2输入四正与门74LS08│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1A 1B 1Y 2A 2B 2Y GNDVcc 4B 4A 4Y 3B 3A 3Y┌┴—┴—┴—┴—┴—┴—┴┐__ │14 13 12 11 10 9 8│Y = AB ）│ 2输入四正与非门74LS00│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1A 1B 1Y 2A 2B 2Y GNDVcc 1C 1Y 3C 3B 3A 3Y┌┴—┴—┴—┴—┴—┴—┴┐___ │14 13 12 11 10 9 8│Y = ABC ）│ 3输入三正与非门74LS10│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1A 1B 2A 2B 2C 2Y GNDVcc H G Y┌┴—┴—┴—┴—┴—┴—┴┐│14 13 12 11 10 9 8│）│ 8输入与非门74LS30│ 1 2 3 4 5 6 7│ ________└┬—┬—┬—┬—┬—┬—┬┘ Y = ABCDEFGHA B C D E F GND页首非门,驱动器与门,与非门或门,或非门异或门,比较器译码器寄存器正逻辑或门,或非门:Vcc 4B 4A 4Y 3B 3A 3Y┌┴—┴—┴—┴—┴—┴—┴┐ 2输入四或门74LS32│14 13 12 11 10 9 8│）│ Y = A+B│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1A 1B 1Y 2A 2B 2Y GNDVcc 4Y 4B 4A 3Y 3B 3A┌┴—┴—┴—┴—┴—┴—┴┐ 2输入四或非门74LS02│14 13 12 11 10 9 8│ ___）│ Y = A+B│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1Y 1A 1B 2Y 2A 2B GNDVcc 2Y 2B 2A 2D 2E 1F┌┴—┴—┴—┴—┴—┴—┴┐ 双与或非门74S51│14 13 12 11 10 9 8│ _____）│ 2Y = AB+DE│ 1 2 3 4 5 6 7│ _______└┬—┬—┬—┬—┬—┬—┬┘ 1Y = ABC+DEF1Y 1A 1B 1C 1D 1E GNDVcc D C B K J Y┌┴—┴—┴—┴—┴—┴—┴┐ 4-2-3-2与或非门74S64 74S65(OC门)│14 13 12 11 10 9 8│ ______________）│ Y = ABCD+EF+GHI+JK│ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘A E F G H I GND页首非门,驱动器与门,与非门或门,或非门异或门,比较器译码器寄存器2输入四异或门74LS86Vcc 4B 4A 4Y 3Y 3B 3A┌┴—┴—┴—┴—┴—┴—┴┐│14 13 12 11 10 9 8│）│ _ _│ 1 2 3 4 5 6 7│ Y=AB+AB└┬—┬—┬—┬—┬—┬—┬┘1A 1B 1Y 2Y 2A 2B GND8*2输入比较器74LS688_Vcc Y B8 A8 B7 A7 B6 A6 B5 A5┌┴—┴—┴—┴—┴—┴—┴—┴—┴—┴┐ 8*2输入比较器74LS688│20 19 18 17 16 15 14 13 12 11│）││ 1 2 3 4 5 6 7 8 9 10│└┬—┬—┬—┬—┬—┬—┬—┬—┬—┬┘CE A1 B1 A2 B2 A3 B3 A4 B4 GND_Y=A1⊙B1+A2⊙B2+A3⊙B3+A4⊙B4+A5⊙B5+A6⊙B6+A7⊙B7+A8⊙B8 页首非门,驱动器与门,与非门或门,或非门异或门,比较器译码器寄存器3-8译码器74LS138Vcc -Y0 -Y1 -Y2 -Y3 -Y4 -Y5 -Y6 __ _ _ _ __ _ _ __ _ _ __ _┌┴—┴—┴—┴—┴—┴—┴—┴┐ Y0=A B C Y1=A B B Y2=A B C Y3=A B C │16 15 14 13 12 11 10 9 │）│ __ _ _ __ _ __ _ __│ 1 2 3 4 5 6 78│ Y4=A B C Y5=A B C Y6=A B C Y7=A B C└┬—┬—┬—┬—┬—┬—┬—┬┘A B C -CS0 -CS1 CS2 -Y7 GND双2-4译码器74LS139Vcc -2G 2A 2B -Y0 -Y1 -Y2 -Y3 __ __ __ __ __ __ __ __┌┴—┴—┴—┴—┴—┴—┴—┴┐ Y0=2A 2B Y1=2A 2B Y2=2A 2B Y3=2A 2B │16 15 14 13 12 11 10 9 │）│ __ __ __ __ __ __ __ __│ 1 2 3 4 5 6 7 8│ Y0=1A 1B Y1=1A 1B Y2=1A 1B Y3=1A 1B└┬—┬—┬—┬—┬—┬—┬—┬┘-1G 1A 1B -Y0 -Y1 -Y2 -Y3 GND8*2输入比较器74LS688_Vcc Y B8 A8 B7 A7 B6 A6 B5 A5┌┴—┴—┴—┴—┴—┴—┴—┴—┴—┴┐ 8*2输入比较器74LS688│20 19 18 17 16 15 14 13 12 11│）││ 1 2 3 4 5 6 7 8 9 10│└┬—┬—┬—┬—┬—┬—┬—┬—┬—┬┘CE A1 B1 A2 B2 A3 B3 A4 B4 GND_Y=A1⊙B1+A2⊙B2+A3⊙B3+A4⊙B4+A5⊙B5+A6⊙B6+A7⊙B7+A8⊙B8寄存器:Vcc 2CR 2D 2Ck 2St 2Q -2Q┌┴—┴—┴—┴—┴—┴—┴┐ 双D触发器74LS74│14 13 12 11 10 9 8 │）││ 1 2 3 4 5 6 7│└┬—┬—┬—┬—┬—┬—┬┘1Cr 1D 1Ck 1St 1Q -1Q GNDVcc 8Q 8D 7D 7Q 6Q 6D 5D 5Q ALE┌┴—┴—┴—┴—┴—┴—┴—┴—┴—┴┐ 8位锁存器74LS373│20 19 18 17 16 15 14 13 12 11│）││ 1 2 3 4 5 6 7 8 9 10│└┬—┬—┬—┬—┬—┬—┬—┬—┬—┬┘-OE 1Q 1D 2D 2Q 3Q 3D 4D 4Q GND74HC系列功能表集成电路-74HC系列型号器件名称厂牌[数据表] 74HC00 四2输入端与非门 TI74HC01 四2输入端与非门(OC)74HC02 四2输入端或非门 TI74HC03 四2输入端与非门(OC) TI74HC04 六反相器 TI74HC05 HEX INVERTERS74HC08 四2输入端与门 TI74HC09 QUADRUPLE 2-INPUT POSITIVE-AND74HC10 三3输入端与非门 TI74HC11 三3输入端与门 TI74HC14 双4输入端与非门 TI74HC20 双4输入端与非门 TI74HC21 双4输入端与门 TI74HC27 三3输入端或非门 TI74HC30 8输入端与非门 TI74HC32 四2输入端或门 TI74HC42 4线-10线译码器(BCD输入) TI74HC73 DUAL J-K FLIP-FLOP TI74HC74 双上升沿D型触发器 TI74HC75 4-BIT BISTABLE LATCH TI74HC85A 四位数值比较器 TI74HC86 四2输入端异或门 TI74HC93 双4输入端与非门 TI74HC107 双主-从J-K触发器 TI74HC109 双J-K触发器 TI74HC112 双下降沿J-K触发器 TI型号器件名称厂牌[数据表]74HC123 可重触发双稳态触发器 TI74HC125 四总线缓冲器 TI74HC126 四总线缓冲器74HC132 四2输入端与非门74HC133 13-INPUT POSITIVE-NAND74HC137 地址锁存3线-8线译码器74HC138 3线-8线译码器74HC139 双2线-4线译码器74HC147 10线-4线优先编码器74HC148 8-LINE TO 3-LINE PRIORITY ENCODERS74HC151 8-INPUT MULTIPLEXER74HC153 DUAL 4-INPUT MULTIPLEXER74HC154 4线-16线译码器74HC157 四2选1数据选择器74HC158 四2选1数据选择器74HC160 DECADE COUNTER74HC161 4位二进制同步计数器74HC162 DECADE COUNTER74HC163 4-BIT BINARY PRESETTABLE COUNTER74HC164 8位移位寄存器74HC165 8位并行输入/串行输出寄存器74HC166 8位并行输入/串行输出移位寄存器 TI,PHI 74HC173 4位D型寄存器 TI74HC174 HEX D-TYPE FLIP-FLOP WITH RESET TI74HC175 四上升沿D型触发器 TI74HC190 十进制同步加/减计数器 TI74HC191 4位二进制同步加/减计数器 TI74HC192 BCD二进制同步加/减计数器 TI型号器件名称厂牌[数据表]74HC193 可预置4位二进制加/减计数器 TI74HC194 4位并入/串入-并出/串出移位寄存 TI74HC195 4位移位寄存器 TI74HC221 双单稳态触器 TI74HC237 3-8线译码器（带地址锁存） TI74HC238 3-8线译码器 TI74HC239 双2-4线译码器74HC240 八反相缓冲/线驱动/线接收器 TI74HC241 八缓冲/线驱动/线接收器 TI74HC243 四总线收发器 TI74HC244 八缓冲/线驱动/线接收器 TI,FSC74HC245 八双向总线发送/接发器 TI,FSC74HC251 8选1数据选择器74HC253 双4选1数据选择器74HC257 四2选1数据选择器74HC258 四2选1数据选择器74HC259 8位可寻址锁存器74HC266 QUADRUPLE 2-INPUT EXCLUSIVE-NOR74HC273 八D触发器74HC280 9位奇偶产生器/校验器 TI74HC283 4位二进制超位全加器74HC297 DIGITAL PHASE-LOCKED-LOOP74HC299 8位双向通用移位/存储寄存器型号器件名称厂牌[数据表]74HC354 带锁存三态8-1多路转换开关74HC365 六总线驱动器74HC366 六反相总线驱动器74HC367 六总线驱动器74HC368 六反相总线驱动器74HC373 六D型锁存器74HC374 六上升沿D型触发器74HC375 4-BIT BISTABLE LATCH74HC377 六上升沿D型触发器74HC378 6-BIT D-TYPE FLIP-FLOP74HC379 QUADRUPLE D-TYPE FLIP-FLOP74HC390 双十进制计数器74HC393 双4位二进制计数器74HC4002 高速CMOS双4输入端或非门74HC4015 高速CMOS双4位串入/并出移位寄存器74HC4016 高速CMOS四传输门74HC4017 高速CMOS十进制计数/分配器74HC4020 高速CMOS14级串行二进制计数/分频器74HC4024 高速CMOS7级二进制串行计数/分频器74HC4040 高速CMOS12级二进制串行计数/分频器74HC4046A 高速CMOS锁相环74HC4049 高速CMOS六反相缓冲/变换器74HC4050 高速CMOS六同相缓冲/变换器CD系列芯片功能CD4000 双3输入端或非门+单非门TICD4001 四2输入端或非门HIT/NSC/TI/GOLCD4002 双4输入端或非门NSCCD4006 18位串入/串出移位寄存器NSCCD4007 双互补对加反相器NSCCD4008 4位超前进位全加器NSCCD4009 六反相缓冲/变换器NSCCD4010 六同相缓冲/变换器NSCCD4011 四2输入端与非门HIT/TICD4012 双4输入端与非门NSCCD4013 双主-从D型触发器FSC/NSC/TOSCD4014 8位串入/并入-串出移位寄存器NSCCD4015 双4位串入/并出移位寄存器TICD4016 四传输门FSC/TICD4017 十进制计数/分配器FSC/TI/MOTCD4018 可预制1/N计数器NSC/MOTCD4019 四与或选择器PHICD4020 14级串行二进制计数/分频器FSCCD4021 08位串入/并入-串出移位寄存器PHI/NSCCD4022 八进制计数/分配器NSC/MOTCD4023 三3输入端与非门NSC/MOT/TICD4024 7级二进制串行计数/分频器NSC/MOT/TICD4025 三3输入端或非门NSC/MOT/TICD4026 十进制计数/7段译码器NSC/MOT/TICD4027 双J-K触发器NSC/MOT/TICD4028 BCD码十进制译码器NSC/MOT/TICD4029 可预置可逆计数器NSC/MOT/TICD4030 四异或门NSC/MOT/TI/GOLCD4031 64位串入/串出移位存储器NSC/MOT/TICD4032 三串行加法器NSC/TICD4033 十进制计数/7段译码器NSC/TICD4034 8位通用总线寄存器NSC/MOT/TICD4035 4位并入/串入-并出/串出移位寄存NSC/MOT/TI CD4038 三串行加法器NSC/TICD4040 12级二进制串行计数/分频器NSC/MOT/TICD4041 四同相/反相缓冲器NSC/MOT/TICD4042 四锁存D型触发器NSC/MOT/TICD4043 4三态R-S锁存触发器("1"触发) NSC/MOT/TI CD4044 四三态R-S锁存触发器("0"触发) NSC/MOT/TI CD4046 锁相环NSC/MOT/TI/PHICD4047 无稳态/单稳态多谐振荡器NSC/MOT/TICD4048 4输入端可扩展多功能门NSC/HIT/TICD4049 六反相缓冲/变换器NSC/HIT/TICD4050 六同相缓冲/变换器NSC/MOT/TICD4051 八选一模拟开关NSC/MOT/TICD4052 双4选1模拟开关NSC/MOT/TICD4053 三组二路模拟开关NSC/MOT/TICD4054 液晶显示驱动器NSC/HIT/TICD4055 BCD-7段译码/液晶驱动器NSC/HIT/TI CD4056 液晶显示驱动器NSC/HIT/TICD4059 “N”分频计数器NSC/TICD4060 14级二进制串行计数/分频器NSC/TI/MOT CD4063 四位数字比较器NSC/HIT/TICD4066 四传输门NSC/TI/MOTCD4067 16选1模拟开关NSC/TICD4068 八输入端与非门/与门NSC/HIT/TICD4069 六反相器NSC/HIT/TICD4070 四异或门NSC/HIT/TICD4071 四2输入端或门NSC/TICD4072 双4输入端或门NSC/TICD4073 三3输入端与门NSC/TICD4075 三3输入端或门NSC/TICD4076 四D寄存器CD4077 四2输入端异或非门HITCD4078 8输入端或非门/或门CD4081 四2输入端与门NSC/HIT/TICD4082 双4输入端与门NSC/HIT/TICD4085 双2路2输入端与或非门CD4086 四2输入端可扩展与或非门CD4089 二进制比例乘法器CD4093 四2输入端施密特触发器NSC/MOT/ST CD4094 8位移位存储总线寄存器NSC/TI/PHICD4095 3输入端J-K触发器CD4096 3输入端J-K触发器CD4097 双路八选一模拟开关CD4098 双单稳态触发器NSC/MOT/TICD4099 8位可寻址锁存器NSC/MOT/STCD40100 32位左/右移位寄存器CD40101 9位奇偶较验器CD40102 8位可预置同步BCD减法计数器CD40103 8位可预置同步二进制减法计数器CD40104 4位双向移位寄存器CD40105 先入先出FI-FD寄存器CD40106 六施密特触发器NSC\TICD40107 双2输入端与非缓冲/驱动器HAR\TICD40108 4字×4位多通道寄存器CD40109 四低-高电平位移器CD40110 十进制加/减,计数,锁存,译码驱动STCD40147 10-4线编码器NSC\MOTCD40160 可预置BCD加计数器NSC\MOTCD40161 可预置4位二进制加计数器NSC\MOTCD40162 BCD加法计数器NSC\MOTCD40163 4位二进制同步计数器NSC\MOTCD40174 六锁存D型触发器NSC\TI\MOTCD40175 四D型触发器NSC\TI\MOTCD40181 4位算术逻辑单元/函数发生器CD40182 超前位发生器CD40192 可预置BCD加/减计数器(双时钟) NSC\TI CD40193 可预置4位二进制加/减计数器NSC\TICD40194 4位并入/串入-并出/串出移位寄存NSC\MOT CD40195 4位并入/串入-并出/串出移位寄存NSC\MOT CD40208 4×4多端口寄存器型号器件名称厂牌备注CD4501 4输入端双与门及2输入端或非门CD4502 可选通三态输出六反相/缓冲器CD4503 六同相三态缓冲器CD4504 六电压转换器CD4506 双二组2输入可扩展或非门CD4508 双4位锁存D型触发器CD4510 可预置BCD码加/减计数器CD4511 BCD锁存,7段译码,驱动器CD4512 八路数据选择器CD4513 BCD锁存,7段译码,驱动器(消隐)CD4514 4位锁存,4线-16线译码器CD4515 4位锁存,4线-16线译码器CD4516 可预置4位二进制加/减计数器CD4517 双64位静态移位寄存器CD4518 双BCD同步加计数器CD4519 四位与或选择器CD4520 双4位二进制同步加计数器CD4521 24级分频器CD4522 可预置BCD同步1/N计数器CD4526 可预置4位二进制同步1/N计数器CD4527 BCD比例乘法器CD4528 双单稳态触发器CD4529 双四路/单八路模拟开关CD4530 双5输入端优势逻辑门CD4531 12位奇偶校验器CD4532 8位优先编码器CD4536 可编程定时器CD4538 精密双单稳CD4539 双四路数据选择器CD4541 可编程序振荡/计时器CD4543 BCD七段锁存译码,驱动器CD4544 BCD七段锁存译码,驱动器CD4547 BCD七段译码/大电流驱动器CD4549 函数近似寄存器CD4551 四2通道模拟开关CD4553 三位BCD计数器CD4555 双二进制四选一译码器/分离器CD4556 双二进制四选一译码器/分离器CD4558 BCD八段译码器CD4560 "N"BCD加法器CD4561 "9"求补器CD4573 四可编程运算放大器CD4574 四可编程电压比较器CD4575 双可编程运放/比较器CD4583 双施密特触发器CD4584 六施密特触发器CD4585 4位数值比较器CD4599 8位可寻址锁存器。

74门电路系列芯片资料图表

74HC00 四 2 输入与非门国际通用符号54/7400 ， 54/74H00 ， 54L 00 ， 54/74S00 ， 54/74LS00 ， 54/74ALS00 ， 54/ 74F 00 ，54/74HC00 ， 54/ 74AC 00 ， 54/74HCT00 ， 54/74ACT00 ， 54/74AHC00 ， 54/74AHCT00 ，74LV00 ， 74LVC00。

74HC02 四 2 输入或非门国际通用符号54/7402 ， 54L 02 ， 54/74S02 ， 54/74LS02 ， 54/74AS02 ， 54/74ALS02 ， 54/ 74F 02 ，54/74HC02 ， 74AC 02 ， 54/74HCT02 ， 54/74ACT02 ， 54/74AHC02 ， 54/AHCT02 ， 74LV02 ，74LVC02。

74HC04 六反相器国际通用符号54/7404 ， 54L 04 ， 54/74H04 ， 54/74S04 ， 54/74LS04 ， 54/74AS04 ， 54/74ALS04 ，54/ 74F 04 ， 54/74HCU04 ， 54/74HC04 ， 54/ 74AC 04 ， 54/74HCT04 ， 54/74ACT04 ，54/74AHC04 ， 54/74AHCT04 ， 74LV04 ， 74LVC04 ， 54/74AHCU04 ， 74LVU04 ， 74LVCU04。

74HC08 四 2 输入与门国际通用符号54/7408 ， 54/74S08 ， 54/74LS08 ， 54/74AS08 ， 54/74ALS08 ， 54/ 74F 08 ， 54/74HC08 ，54/74HCT08 ， 54/ 74AC 08 ， 54/74ACT08 ， 54/74AHC08 ， 54/74AHCT08 ， 74LV08 ， 74LVC08。

74HC系列芯片资料

74HC00 四 2 输入与非门国际通用符号54/7400 ， 54/74H00 , 54L 00 ， 54/74S00 ， 54/74LS00 , 54/74ALS00 ， 54/ 74F 00 , 54/74HC00 , 54/ 74AC 00 ， 54/74HCT00 ， 54/74ACT00 ， 54/74AHC00 ， 54/74AHCT00 ，74LV00 , 74LVC00。

74HC02 四 2 输入或非门国际通用符号54/7402 ， 54L 02 , 54/74S02 , 54/74LS02 , 54/74AS02 ， 54/74ALS02 ， 54/ 74F 02 ，54/74HC02 ， 74AC 02 ， 54/74HCT02 ， 54/74ACT02 ， 54/74AHC02 ， 54/AHCT02 ， 74LV02 , 74LVC02。

74HC04 六反相器国际通用符号54/7404 ， 54L 04 ， 54/74H04 ， 54/74S04 ， 54/74LS04 ， 54/74AS04 ， 54/74ALS04 ，54/ 74F 04 ， 54/74HCU04 ， 54/74HC04 ， 54/ 74AC 04 ， 54/74HCT04 , 54/74ACT04 ，54/74AHC04 ， 54/74AHCT04 ， 74LV04 ， 74LVC04 , 54/74AHCU04 ， 74LVU04 ， 74LVCU04 .74HC08 四 2 输入与门国际通用符号54/7408 ， 54/74S08 ， 54/74LS08 ， 54/74AS08 ， 54/74ALS08 ， 54/ 74F 08 ， 54/74HC08 ，54/74HCT08 ， 54/ 74AC 08 ， 54/74ACT08 ， 54/74AHC08 ， 54/74AHCT08 , 74LV08 ， 74LVC08。

74HC00多谐振荡器电路图

74HC00多谐振荡器电路图一、电路及工作原理电路见下图。

74HC00为四一二输入端与非门。

如果将二输入端与非门的一个输入端接高电平，或者将两个输入端短接，则其输出便与余下的一个输入端或两个短接的输入端反相，相当于一个反相器。

在下图所示电路中，设IC1A的①脚、IC1B的⑤脚为高电平（K1按下，K2断开），则IC1A可看作②脚输入③脚输出、可看作IC1B④脚输入⑥脚输出的反相器，其传输特性如右图所示。

由于R1的负反馈作用，如果②脚电压较低，③脚输出高电压，则通过R1把②脚电平拉高；如果②脚电压较高、③脚输出低，则通过R1把②脚电平拉低，结果折衷停在中心点C。

输出100%反馈到输入，相当于把左下三角形部分按照虚线折到右上角。

虚线与传输特性的交点C就是反相器的工作点，约等于1/2VCC。

C点位于传输特性的陡坡中心。

本例中，74HC00输入变化1mV，输出变化高达1V。

由于IC1③脚和④脚连按，其⑥脚输出的信号与②脚同相但幅度放大。

图中C1起正反馈作用。

只要②脚电压有微小的波动，如提高0.1mV，则③脚电压降低100mV，再经IC1B 反相，⑥脚输出电压升高大于1V，此电压变化通过C1送回②脚，使②脚电压继续升高，直至VCC+0.7V。

这时，IC1内部的保护二极管导通，使输入电压不能高，反相器工作点停在右图的D点。

D点位于传输特性的水平线上，输入变化几乎不影响输出。

此时，IC1的②脚为高电平，③脚为低电平，⑥脚为高电平。

电阻R1接在②、③脚之间。

③脚是输出端，内阻很低，②脚是输入端，内阻极高。

②高③低的电位差使得R1上的电流I的方向如左图所示，放电的起始电压为VCC+0.7V，放电的最终电压为0V。

实际放电到C点（1/2VCC）附近，就停止了。

放电从VCC+0.7V到1/2VCC约需1.1R1C1=1.1（2.2l0（6））（0.110（-6）0.25s。

这时，②脚变低，经过IC1A反相放大③脚变高IC1B反相放大⑥脚快速变低C1②脚。

如何读懂数字逻辑器件手册(74HC00)

IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1998, Texas Instruments Incorporated。

SL74HC00D中文资料

RECOMMENDED OPERATING CONDITIONS
Symbol VCC VIN, VOUT TA tr, t f Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage, Output Voltage (Referenced to GND) Operating Temperature, All Package Types Input Rise and Fall Time (Figure 1) VCC =2.0 V VCC =4.5 V VCC =6.0 V Min 2.0 0 -55 0 0 0 Max 6.0 VCC +125 1000 500 400 Unit V V °C ns
SL74HC00
MAXIMUM RATINGS *
Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL
*
Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package)

74HC00-datasheet

2. Features
Input levels: For 74HC00: CMOS level For 74HCT00: TTL level ESD protection: HBM JESD22-A114F exceeds 2 000 V MM JESD22-A115-A exceeds 200 V Multiple package options Specified from −40 °C to +85 °C and from −40 °C to +125 °C
H = HIGH voltage level; L = LOW voltage level; X = don’t care.
7. Limiting values
Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC IIK IOK IO ICC IGND Tstg Ptot Parameter supply voltage input clamping current output clamping current output current supply current ground current storage temperature total power dissipation DIP14 package SO14, (T)SSOP14 and DHVQFN14 packages
Fig 4.
Pin configuration DIP14, SO14 and (T)SSOP14

74HC00中文资料

单位
ns ns
参数
tPLH输出由低到高传输延迟时间 tPHL输出由高到低传输延迟时间
测试条件
Vcc =5V,CL=50Pf(‘H00 为 25Pf) RL=400Ω(‘H00 和‘S00 为 260Ω，
‘LS00 为 2KΩ
‘00 最大
22
15
‘H00 最大
10
10
‘S00 最大 4.5
5
‘LS00 最大 15
15
54S00/74S00
54LS00/74LS00
单
最小额定最大最小额定最大最小额定最大最小额定最大位
电源电压 54 4.5
5
5.5 4.5
5
5.5 4.5
5
Vcc
74 4.75 5 5.25 4.75 5 5.25 4.75 5
5.5 4.5 5.25 4.75
5 5
5.5 5.25
Vcc＝最大
VI=5.5V VI=7V
1
IIH输入高电平电流 Vcc＝最大
VIH=2.4V VIH=2.7V
40
IIL输入低电平电流 Vcc＝最大
VIL=0.4V VIL=0.5V
-1.6
IOS输出短路电流
Vcc＝最大
54 -20 -55 74 -18 -55
ICCH输出高电平时电源电流
Vcc＝最大
海纳电子资讯网：ｗｗｗ．ｆｐｇａ－ａｒｍ．ｃｏｍ为您提供各种ＩＣ中文资料
54XXX …………………………………. -55~125℃ 74XXX …………………………………. 0~70℃ 存储温度 ………………………………………….-65~150℃ 功能表

74HC00芯片手册

TL F 5292
RRD-B30M105 Printed in U S A
Absolute Maximum Ratings
(Notes 1
2)
Operating Conditions
Supply Voltage (VCC) DC Input or Output Voltage (VIN VOUT) Operating Temp Range (TA) MM74HC MM54HC Input Rise or Fall Times (tr tf) VCC e 2V VCC e 4 5V VCC e 6 0V Min 2 0 Max 6 VCC Units V V
20
40
Note 1 Absolute Maximum Ratings are those values beyond which damage to the device may occur Note 2 Unless otherwise specified all voltages are referenced to ground Note 3 Power Dissipation temperature derating plastic ‘‘N’’ package b 12 mW C from 65 C to 85 C ceramic ‘‘J’’ package b 12 mW C from 100 C to 125 C Note 4 For a power supply of 5V g 10% the worst case output voltages (VOH and VOL) occur for HC at 4 5V Thus the 4 5V values should be used when designing with this supply Worst case VIH and VIL occur at VCC e 5 5V and 4 5V respectively (The VIH value at 5 5V is 3 85V ) The worst case leakage current (IIN ICC and IOZ) occur for CMOS at the higher voltage and so the 6 0V values should be used VIL limits are currently tested at 20% of VCC The above VIL specification (30% of VCC) will be implemented no later than Q1 CY’89

sn74hc00-q1数据手册

PACKAGING INFORMATION Orderable DeviceStatus (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)SN74HC00QDRQ1ACTIVE SOIC D 142500Pb-Free (RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIM SN74HC00QPWRQ1ACTIVE TSSOP PW 142000Pb-Free (RoHS)CU NIPDAU Level-1-250C-UNLIM (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducteddestructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.PACKAGE OPTION ADDENDUM 29-May-2007Addendum-Page 1IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandInterface Digital ControlLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityRFID TelephonyLow Power Video&ImagingWirelessWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。

怎样提高74ls04非门的输出电压

四与非门74HC00芯片资料
74HC00芯片介绍
74HC00是TTL2输入端四与非门，高电平4V，低电平1V，与非门电路经常用来实现组合逻辑的运算。
74HC00引脚图
74HC00引脚图，如图1所示。引脚功能，如表1所示。
74HC00功能表
74HC00功能表，如图表2所示。
74HC00工作特性
电源电压范圈：7V；
输入电压：7V；
工作环境温度：0～70°C。
四与非门74hc00芯片资料74hc00芯片介绍74hc00是ttl2输入端四与非门高电平4v低电平1v与非门电路经常用来实现组合逻辑的运算
怎样提高74ls04非门的输出电压,最好提ห้องสมุดไป่ตู้到5 V,或者用别的芯片代替?
如下图，假定非门的输出高电平，那么NPN三极管导通5V-0.3V（三极管导通管压降）=4.7V加到电阻R1上。已经可以满足后续电路的使用了。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

September 1983Revised February 1999MM74HC00 Quad 2-Input NAND Gate © 1999 Fairchild Semiconductor Corporation DS005292.prf MM74HC00Quad 2-Input NAND GateGeneral DescriptionThe MM74HC00 NAND gates utilize advanced silicon-gateCMOS technology to achieve operating speeds similar toLS-TTL gates with the low power consumption of standardCMOS integrated circuits. All gates have buffered outputs.All devices have high noise immunity and the ability todrive 10 LS-TTL loads. The 74HC logic family is function-ally as well as pin-out compatible with the standard 74LSlogic family. All inputs are protected from damage due tostatic discharge by internal diode clamps to V CC andground.Featuress Typical propagation delay: 8 nss Wide power supply range: 2–6Vs Low quiescent current: 20 µA maximum (74HC Series)s Low input current: 1 µA maximums Fanout of 10 LS-TTL loadsOrdering Code:Devices also available in T ape and Reel. Specify by appending the suffix letter “X” to the ordering code.Connection DiagramPin Assignments for DIP, SOIC, SOP and TSSOPTop ViewLogic DiagramOrder Number Package Number Package DescriptionMM74HC00M M14A14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” NarrowMM74HC00SJ M14D14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WideMM74HC00MTC MTC1414-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm WideMM74HC00N N14A14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 2M M 74H C 00Absolute Maximum Ratings (Note 1)(Note 2)Recommended Operating ConditionsNote 1: Absolute Maximum Ratings are those values beyond which dam-age to the device may occur.Note 2: Unless otherwise specified all voltages are referenced to ground.Note 3: Power Dissipation temperature derating — plastic “N” package: −12 mW/°C from 65°C to 85°C.DC Electrical Characteristics (Note 4)Note 4: For a power supply of 5V ±10% the worst case output voltages (V OH , and V OL ) occur for HC at 4.5V. Thus the 4.5V values should be used when designing with this supply. Worst case V IH and V IL occur at V CC = 5.5V and 4.5V respectively. (The V IH value at 5.5V is 3.85V.) The worst case leakage cur-rent (I IN , I CC , and I OZ ) occur for CMOS at the higher voltage and so the 6.0V values should be used.Supply Voltage (V CC )−0.5 to +7.0V DC Input Voltage (V IN )−1.5 to V CC +1.5V DC Output Voltage (V OUT )−0.5 to V CC +0.5VClamp Diode Current (I IK , I OK )±20 mA DC Output Current, per pin (I OUT )±25 mA DC V CC or GND Current, per pin (I CC )±50 mAStorage Temperature Range (T STG )−65°C to +150°CPower Dissipation (P D )(Note 3)600 mW S.O. Package only 500 mW Lead Temperature (T L )(Soldering 10 seconds)260°C MinMax Units Supply Voltage (V CC )26V DC Input or Output Voltage 0V CCV(V IN , V OUT )Operating Temperature Range (T A )−40+85°CInput Rise or Fall Times (t r , t f )V CC = 2V1000ns V CC = 4.5V 500ns V CC = 6.0V400nsSymbol ParameterConditionsV CC T A = 25°C T A = −40 to 85°C T A = −55 to 125°C Units TypGuaranteed LimitsV IHMinimum HIGH Level 2.0V 1.5 1.5 1.5V Input Voltage4.5V 3.15 3.15 3.15V 6.0V 4.2 4.2 4.2V V ILMaximum LOW Level 2.0V 0.50.50.5V Input Voltage4.5V 1.35 1.35 1.35V 6.0V1.81.81.8VV OHMinimum HIGH Level V IN = V IH or V IL Output Voltage|I OUT | ≤ 20 µA2.0V 2.0 1.9 1.9 1.9V 4.5V 4.5 4.4 4.4 4.4V 6.0V6.05.95.95.9VV IN = V IH or V IL |I OUT | ≤ 4.0 mA 4.5V 4.2 3.98 3.84 3.7V |I OUT | ≤ 5.2 mA6.0V5.75.485.345.2VV OLMaximum LOW Level V IN = V IH Output Voltage|I OUT | ≤ 20 µA2.0V 00.10.10.1V 4.5V 00.10.10.1V 6.0V0.10.10.1VV IN = V IH |I OUT | ≤ 4.0 mA 4.5V 0.20.260.330.4V |I OUT | ≤ 5.2 mA6.0V 0.20.260.330.4V I IN Maximum Input V IN = V CC or GND6.0V±0.1±1.0±1.0µACurrentI CCMaximum Quiescent V IN = V CC or GND 6.0V2.02040µASupply CurrentI OUT = 0 µAMM74HC00AC Electrical CharacteristicsV CC = 5V, T A = 25°C, C L = 15 pF, t r = t f = 6 ns AC Electrical CharacteristicsV CC = 2.0V to 6.0V, C L = 50 pF, t r = t f = 6 ns (unless otherwise specified)Note 5: C PD determines the no load dynamic power consumption, P D = C PD V CC 2 f + I CC V CC , and the no load dynamic current consumption,I S = C PD V CC f + I CC .Symbol ParameterConditionsTyp GuaranteedUnits Limit t PHL , t PLHMaximum Propagation 815nsDelaySymbolParameterConditionsV CC T A = 25°C T A = −40 to 85°C T A = −55 to 125°C Units Typ Guaranteed Limitst PHL , t PLH Maximum Propagation2.0V 4590113134ns Delay4.5V 9182327ns 6.0V8151923ns t TLH , t THL Maximum Output Rise2.0V 307595110ns and Fall Time4.5V 8151922ns 6.0V7131619ns C PD Power Dissipation (per gate)20pFCapacitance (Note 5)C INMaximum Input 5101010pFCapacitance 4M M 74H C 00Physical Dimensions inches (millimeters) unless otherwise noted14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” NarrowPackage Number M14A14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm WidePackage Number M14DMM74HC00Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.M M 74H C 00 Q u a d 2-I n p u t N A N D G a t eLIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:1.Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to the user.2. A critical component in any component of a life support device or system whose failure to perform can be rea-sonably expected to cause the failure of the life support device or system, or to affect its safety or Physical Dimensions inches (millimeters) unless otherwise noted (Continued)14-Lead Plastic Dual-In Line Package (PDIP), JEDEC MS-001, 0.300” WidePackage Number N14A。