APHK1608SURCK中文资料
relyon plasma BA-KommCAN_ ES F03536 00 产品说明书
ÍndiceBA-KommCAN_ES / F0353600junio 20161Manual de instruccionesPaquete de comunicación CANBA-KommCAN_ES / F03536002BA-KommCAN_ES / F0353600Nos alegramos de que se haya decidido por un producto de alta calidad de la empresa relyonplasma GmbH y le agradecemos la confianza depositada en nosotros.Para poder utilizar el producto de forma óptima, lea atentamente el manual de instrucciones.¡Nota importante!¡Es imprescindible que lea todo el manual antes del montaje, la instalación y la puesta enservicio!¡Tenga en cuenta a toda costa las indicaciones de seguridad! El incumplimiento de las indicaciones de seguridad puede provocar accidentes y conllevar heridas graves para las personas o daños en la máquina. ¡La puesta en servicio y el funcionamiento del producto solo puede llevarlos a cabo personal técnico cualificado y con la debida formación!¡Instruya al personal! El explotador/usuario es responsable de que el personal haya comprendidocompletamente el manejo del aparato y las disposiciones de seguridad.© Copyright relyon plasma GmbH 2016.Todos los derechos reservados. All rights reserved.Los textos, las imágenes y los gráficos así como su disposición están protegidos por los derechos de propiedadintelectual así como otras leyes sobre protección. Se prohíbe la transferencia así como la distribución de estedocumento, la utilización y la comunicación de su contenido siempre que no se indique expresamente. Las infracciones implicarán una indemnización por daños y perjuicios. Todos los derechos reservados para el caso de registro depatente, registro de modelo de utilidad industrial o registro de modelo estético.Manual de instrucciones originalÍndiceBA-KommCAN_ES / F0353600 junio 2016 31Seguridad .................................................................................................................................. 4 1.1 Peligros residuales ............................................................................................................................ 4 1.2 Indicaciones y obligaciones para el usuario ..................................................................................... 4 1.3 Servicio de acuerdo con la normativa ............................................................................................... 5 1.4 Condiciones de servicio no admisibles ............................................................................................. 5 2Descripción del sistema ........................................................................................................... 6 2.1 Función.............................................................................................................................................. 6 2.2 Vista general del sistema .................................................................................................................. 6 2.2.1 Descripción de los componentes ........................................................................................ 6 2.2.2 Volumen de suministro ....................................................................................................... 7 2.2.3 Componentes de hardware necesarios adicionales ........................................................... 7 3Transporte/Almacenaje ............................................................................................................ 7 4Desembalaje e instalación ....................................................................................................... 7 4.1 Desembalaje ..................................................................................................................................... 7 4.2 Requisitos para la instalación ........................................................................................................... 7 4.3 Instalación de componentes de sistema ........................................................................................... 8 5Funcionamiento ........................................................................................................................ 9 5.1 Puesta en servicio ............................................................................................................................. 9 6 Medio ambiente .. (10)6.1 Eliminación (10)1SeguridadEl sistema se ha construido según las correspondientes normas internacionales. Noobstante, al igual que en cualquier producto técnico, en caso de un uso incorrecto o noadecuado pueden presentarse peligros derivados del sistema.Trabajar con el sistema puede resultar peligroso y provocar heridas graves, o incluso enalgunos casos la muerte. Por este motivo, le recomendamos se proteja usted mismo y aterceros.Además de las indicaciones de este manual de instrucciones, tenga en cuenta lasdisposiciones de seguridad válidas en general.Atención: ¡Peligro!Tenga en cuenta y cumpla las indicaciones de seguridad y los requerimientos de estemanual de instrucciones, ya que en caso de incumplimiento es posible que se produzcanheridas graves al manipular el sistema.1.1Peligros residualesEste sistema se ha fabricado según el estado actual de la técnica. A pesar de ello, nopueden excluirse riesgos residuales.Tenga en cuenta a toda costa las siguientes indicaciones de seguridad:Atención: ¡Tensión eléctrica!•Peligro debido a 230 V. Si se detectan daños en la conexión eléctrica, en el cable de red o en el sistema:- no ponga en servicio el sistema- encargue a un técnico que repare las piezas dañadas o sustitúyalas.¡Peligro de tropezar!Tienda las líneas de conexión en guías de cable adecuadas. Tienda el cable de maneraque no exista peligro de tropezarse con el mismo.1.2Indicaciones y obligaciones para el usuario•En principio, debe contarse con emisiones de interferencias.- El sistema ha sido comprobado según la disposición CEM.- El usuario debe comprobar y garantizar la compatibilidad electromagnética con otros aparatos eléctricos y electrónicos situados justo al lado.•Asegúrese de que:- el personal operario haya leído y comprendido este manual de instrucciones- las personas que se hallan cerca del aparato también hayan sido informadas sobre los peligros y estén equipadas con los medios de protección necesarios- los trabajos de mantenimiento solo sean realizados por personal técnicocualificado.•Instruya al personal operario especialmente sobre las indicaciones de seguridad de este manual de instrucciones.•Mantenga siempre la instalación en estado en condiciones para funcionar.•Las modificaciones en el aparato implicarán la extinción de los permisos de utilización y de la garantía. Excepción: en caso de que el fabricante haya autorizado lasmodificaciones expresamente.4 junio 2016 BA-KommCAN_ES / F03536001.3Servicio de acuerdo con la normativaEl sistema únicamente se ha previsto para el funcionamiento con la fuente de alta tensiónPS2000 y un generador de plasma de la empresa relyon plasma GmbH.Junto con un generador de plasma adecuado, el aparato únicamente es adecuado para eltratamiento de plasma de superficies de materiales (metales, tejidos, vidrio, plásticos) parala activación, la limpieza, el revestimiento o la eliminación de residuos con presiónatmosférica.En ningún caso, el sistema podrá ser accionado por personal que no disponga de ladebida formación.1.4Condiciones de servicio no admisiblesEl servicio del sistema no está permitido en las siguientes condiciones:•uso en áreas con peligro de explosión (EX)•en caso de grandes depósitos de polvo•en caso de humedad del aire muy elevada (>80 % rel.)•con temperaturas fuera del rango 0-40 °C o 32-104 °F•en caso de fuertes vibraciones.¡Nota!Le rogamos tenga en cuenta además las indicaciones de los manuales de instruccionesde todos los componentes adicionales conectados al sistema.BA-KommCAN_ES / F0353600junio 2016 52Descripción del sistema2.1FunciónLos componentes de este sistema son los elementos básicos de una comunicación conuna fuente de corriente PS2000 mediante el bus CAN con un PLC de orden superior.2.2Vista general del sistema2.2.1Descripción de los componentes23146 junio 2016 BA-KommCAN_ES / F03536002.2.2Volumen de suministroEl volumen de suministro incluye los siguientes componentes:•línea CAN (longitud 2 m)•resistencia terminal CAN (Sub-D)•paso de resistencia terminal CAN (Sub-D)•memoria USB con archivo EDS•manual de instrucciones2.2.3Componentes de hardware necesarios adicionalesSegún el PLC utilizado, se precisan componentes de hardware adicionales para unsistema completo en funcionamiento. A continuación encontrará recomendaciones paraello.Otros fabricantes de módulos PLC ofrecen para sus sistemas componentes similares.3Transporte/Almacenaje•Proteja el sistema frente a suciedad y cuerpos extraños.•Proteja el sistema frente a golpes.4Desembalaje e instalación4.1Desembalaje•Abra el embalaje con cuidado.•Extraiga los componentes del embalaje.4.2Requisitos para la instalaciónAntes de instalar el aparato, deben cumplirse los siguientes puntos:•los componentes deben estar en buen estado•en la instalación de tendido fijo y/o en la instalación del edificio, según lasespecificaciones de las respectivas disposiciones de seguridad nacionales (Alemania:VDE 0100) debe preverse un interruptor adecuado o un interruptor automático comodispositivo de aislamiento para todos los polos preconectado para poder aislar elsistema de la tensión de alimentación. Este dispositivo de aislamiento debe disponersecerca del aparato y debe ser fácilmente accesible para el usuario. Además, esteinterruptor debe identificarse como dispositivo de aislamiento para el aparato.•El cableado del sistema solo debe ejecutarlo un técnico electricista con la debida formación.•Tenga en cuenta todos los requisitos de instalación e indicaciones de seguridad de los aparatos conectados adicionalmente.BA-KommCAN_ES / F0353600junio 2016 78 junio 2016 BA-KommCAN_ES / F03536004.3 Instalación de componentes de sistemaPara instalar el sistema ejecute los siguientes puntos en la secuencia indicada:1. Conecte la resistencia de terminal CAN (paso) en el módulo previsto para ello del PLC deorden superior (véase al respecto el capítulo 2.2.3 Componentes de hardware necesarios adicionales).2. Conecte el cable CAN a la resistencia de terminal CAN (paso).3. Conecte la línea CAN con la conexión de la parte trasera de la fuente de corrientePS2000.4. Conecte el bus CAN a la PS2000 con la resistencia de terminal prevista para ello;véase al respecto también en caso necesario el manual de instrucciones de la fuentede corriente PS2000.5. Ajuste el número nodal de la PS2000 según el ajuste especificado en el software delPLC de orden superior.6. Establezca el circuito de parada de emergencia de la PS2000 así como todo el restode conexiones de los aparatos adicionales como se describe en los manuales deinstrucciones correspondientes.El sistema está instalado.5345Funcionamiento5.1Puesta en servicioPara accionar el sistema deben cumplirse los siguientes puntos:- Los interruptores principales de las fuentes de corriente conectadas PS2000 deben estar conectados.- El circuito de parada de emergencia debe estar conectado correctamente.- Las líneas de bus CAN deben estar conectadas, los dos extremos deben finalizar con resistencias terminales y las dirección de bus CAN debe estar ajustadacorrectamente en la parte posterior de la fuente de corriente.- La velocidad en baudios de la fuente de corriente es de 500 kBd. Esto debetenerse en cuenta en la programación del control de orden superior y ajustarsecorrectamente.- El suministro de gas del generador de plasma debe estar presente.- Todos los aparatos/componentes conectados adicionalmente deben estar bien conectados.Si se cumplen estos puntos, podrá controlar su proceso de plasma con el PLC de ordensuperior.Tenga en cuenta que para operar el generador de plasma es imprescindible que sedisponga de un flujo de gas. Se aconseja realizar una comprobación mediante el PLC deorden superior para controlar si hay suficiente flujo de gas. Esto puede realizarse porejemplo con un caudalímetro del tipo SFAB de Festo. Esta comprobación debe preverseen el sistema global. Antes de conectar la alta tensión a la generación de plasma, debeestar disponible durante como mínimo 2 segundos un flujo de gas mediante el generadorde plasma.Cuidado: ¡Daños en el aparato!El generador de plasma puede resultar dañado en caso de accionarse sin gas o con muypoco gas.- ¡No conecte en ningún caso la alta tensión si no fluye suficiente gas por el generador de plasma!BA-KommCAN_ES / F0353600junio 2016 96Medio ambiente 6.1EliminaciónTenga en cuenta la protección del medio ambiente.Los aparatos eléctricos y electrónicos no deben tirarse a la basura doméstica.- El aparato contiene materias primas valiosas que pueden reutilizarse. Por este motivo, recomendamos entregar el aparato en el puesto de recogida correspondiente.relyon plasma GmbHWeidener Straße 1693057 RegensburgAlemaniaTeléfono: +49-941-60098-0Fax: +49-941-60098-100email:**********************10 junio 2016 BA-KommCAN_ES / F0353600。
厨 Ла布斯液压克勒斯瓦亚加菲阿说明书
Intake/delivery connections:CLAMP / DIN / GAS 2” f (*) - flow rate 650 l/min STANDARD: II 3/3 GD c IIB T135°C (zone 2)CONDUCT : II 2/2 GD c IIB T135°C (zone 1)STANDARD: II 3/3 GD c IIB T135°C (zone 2) CONDUCT: II 2/2 GD c IIB T135°C (zone 1)* The curves and performance values refer to pumps with submerged suction and a free delivery outletwith water at 20°C, and vary according to the construction material. ** Attention: the average values of the various configurations of materials by ball and ball seats. *** The value depends on the configuration of the pump.Air supply pressure (bar)Guaranteed head/flow rate according to ISO 9906Air consumption NI/minHead(m)U.S. g.p.m.Flow rate (litres/min)Intake/delivery connections CLAMP / DIN / G 2” f (*)Air connection G 1/2” fMax. flow rate*650 l/minMax. air supply pressure8 barMax. head*80 mMax. self-priming capacity** 5 mMax. stored neg. suction9,5Max. diameter of passing solids8 mmNoise***80 dBDisplacement per cycle 1.825 ccvMax. viscosity50.000 cps(*) NPT connections on requestHeadm)H(ft)Q (U.S. g.p.m.)12007862400102030405060708032,865,698,4131,2164,0196,8229,6262,4 079,266,052,839,626,413,21.534,567,69,1H(ft)FOODBOXER 502: A2-M3M3AISI 316Packing: cardboard box - 79 x 55 x 52 cm-weight 25 KgFB502AISI 316FB502AISI 316STANDARD: II 3/3 GD c IIB T135°C (zone 2)CONDUCT : II 2/2 GD c IIB T135°C (zone 1)FOODBOXER COMPOSITION CODEPRODUCT APPLICATION*) Cover diaphragms (only on Hytrel diaphragms) cannot be fitted individually.ex. FB502-A-HTAAT--Foodboxer 502, body AISI 316, air side diaphragm Hytrel, fluid side diaphragm PTFE, balls AISI 316, ball seats AISI 316, O-Ring in PTFE。
1241.1608;中文规格书,Datasheet资料
Product manualMiniature – Push button switchesSMS(Surface mount) and PMS(PCB mount). CONTENT1. Product_DescriptionSMS/PMS_Base_moduleHeightVariableSMS/PMS2. Technical data and dimensionsSMS/PMSTechnicaldataDimensions SMS/ PMS Base module/Variable HeightDrilling diagram and Solder pads SMS/PMS Base module /Variable height Circuit Diagram SMS/PMS3. Part_numbersPart numbers SMS/PMS Base module/Variable Height4. PackagingPackaging SMS/PMS Base Module/Variable Height5. Qualification Tests6. ROHS Compliant1 Description1.1 SMS/PMS Base moduleMiniature push button switches with a low height of 4,55 - 4,95 mm for surface mounting (SMS) and PCBmounting (PMS).The SMS has large flat surfaces on the top side as well as on the other sides, which are also parallel to each other. This makes the SMS a perfect switch for automatic mounting.The SMS switch is suitable for the SMD soldering process "IR-Reflow".The switch comes with the SMD-leads "Gullwing and J". With J-leads the switch can be lined up with a spacing of 1/2" in one coordinate direction, and with > 13,5 mm in the other coordinate direction. With Gullwing-leads, the switch can be arranged with a spacing of 1/2" in one coordinate direction, and in the other coordinate direction with > 17,5 mm.A minimum spacing of 1/2" to 15 mm is necessary for the PCB version.Basically, the SMS and PMS come in two basic versions concerning the degree of protection. Available are IP 40 and IP 67. According to the degree of protection the IP 40 version is not proof against fluxing and washing, whereas the IP 67 version is. Consequently, the IP 67 version can be exposed to the specified soldering and cleaning processes.The miniature push button switches feature a very good tactile response with an actuation force of about 2N. SMS and PMS are also available with an elongated actuator. These variants serve as base modules for the SMS/PMS variable height version.1.2 SMS/PMS Variable HeightThe variable height SMS/PMS consists of the SMS/PMS base module with elongated actuator and a slip-on button with eight variable heights.The PMS will be supplied with a mounted button. The button for the SMS has to be ordered separately. After soldering, the button must be put on the base module with elongated actuator.Heights between 8,5 mm and 13,75 mm for the SMS and 8,35 mm and 13,60 mm for the PMS are available. Depending on the base module being used, degree of protection for the variable height SMS/PMS is IP 40 or IP 67.2 Data and dimensional drawings2.1 Technical Data SMS/PMS Base module/Variable HeightElectrical data: IP40IP67 Contact material Gold ; Gold/Silver (1) GoldSwitching voltage max. 30V AC/ 42V DC 30V AC/ 42V DCSwitching current max. 50 mA 50 mARated breaking capacity 12 V/10 mA 12 V/10 mALifetime (at 12V/10mA) >1 x 106cycles >1 x 106cyclesLifetime (at 24V/80mA) - ; >1x105 (1) -Initial contact resistance new (IEC 512-2 mV-method) <50 mOhm <50 mOhmInitial contact resistance after 1 x 106 cycles <150 mOhm <150 mOhmInsulation resistance (IEC 512-2) > 1x 108 Ohm > 1x 108 OhmContact bounce time typ. 0,15 ms typ. 0,15 msIP67 Mechanical data: IP40Actuating force 1,8±0,4 N 2,2±0,4 NActuating travel 0,35±0,1 mm 0,35±0,1 mmMechanical strength (force axial, load 1 min.) max. 100 N max. 100 NLifetime(IEC 512-5. Test 9a. Actuating force 5N) >1x 106 cycles >1x 106Soldering data:SMS PMSIP40/IP67 IP40/IP67Soldering method IR Reflow Wave solderingSoldering heat resistance 245 °C/5sec. 248,5 °C/1sec(1)Recommended IR-Reflow Profile for SMSTolerance for Temperature settings T +0°C (according to JEDEC J-STD-020C, July 2004) Used Solder: Omnix O338 (Sn95.5%/Ag4%/Cu0.5%), Alpha Metals Loetsysteme GmbHRecommended Wave Soldering Profile for PMSWave Soldering Equipment: ERSA EMS 3300 Throughput speed: 1m / minSolder type:Sn100C from Nihon Superior (Balver-Solder) Flux material:AW30 Fa. Otto Adjustments Heating ZonesUpper Zone : 280 °C 300 °CLower Zone:450°C500 °C 560 °COther data:SMS PMS SMS PMSIP40 IP40 IP67 IP67Operating temperature(°C) -40 to 85 -40 to 85 -40 to 85 -40 to 85Storage temperature(°C) -40 to 85 -40 to 85 -40 to 85 -40 to 85Degree of protection (DIN 40050) IP40 IP40 IP67 IP67Cleaning agent proofZestronZestronapplied test agent 3) ZestronZestronFlux proof 1) _______ _______ given givenWash proof 2)______________given given1) Visual inspection of switch chamber after immersion in coliophonium solution flux for 3 seconds.2) Inspection of switch chamber after washing process3) CKW and FCKW free mix made of water soluable GlykoletherMechanical data:SMS/PMS SMS/PMS Component Flammabilityrating IP40IP67Socket UL94 V-0 Thermoplast (PA 4.6) Thermoplast (PA 4.6)(PPS) Actuator UL94 V-0 Thermoplast(PPS) ThermoplastCover plate X12 Cr Ni 17 7 X12 Cr Ni 17 7Sealing membrane UL94 HB ________ VMQ Elongated button UL94 V-2 Thermoplast (PC) Thermoplast(PC)Electrical data(material): SMS/PMSSMS/PMSIP40 IP67 Snap dome X12 CrNi 17 7 gold plated on contact sideContacts CuZn37with Ni/Au coated; with Ag coated (1)with Sn coatedTerminals(leads) CuZn372.2 Dimensions SMS/PMS Base module/variable heightSMS Gullwing Base module SMS J-lead Base module PMS PCB Base moduleSMS Gullwing Variable height SMS J-lead Variable height PMS PCB Variable heightSMS Gullwing and J lead with elongated button PMS PCB with elongated buttonGullwing J-AnschlussTotal height information: See point 3.1, Part numbers SMS und PMS Variable height, SMS elongated button must be ordered separately.2.3 Drilling diagram and Solder pads SMS/PMS Base module/variable height Gullwing lead J-lead2.4 Circuit Diagram SMS/PMS3 Part numbers3.1 Part numbers SMS/PMS Base module/Variable HeightPart-Nr. Base moduleType IP40 IP67 Gullwing lead 1241.1600.XX 1241.1606.XX J-lead 1241.1601.XX 1241.1607.XX Through hole lead 1241.1602 1241.1608Part-Nr. Elongated base moduleType IP40 IP67 Gullwing lead 1241.1612.XX 1241.1618.XX J-lead 1241.1613.XX 1241.1619.XX Through hole lead 1241.1614 1241.1620Ordering example______________ Base module_______________________1241.XXXX.XXIndex 11 loose in boxesIndex 23 Blister tapePart-Nr. Variable height PMSHeight in mm IP 40 IP67 Color8,35 1241.1624.11241.1625.1 Yellow1241.1625.2 Orange 9,10 1241.1624.29,85 1241.1624.31241.1625.3 Red1241.1625.4 Blue 10,60 1241.1624.41241.1625.5 Green 11,35 1241.1624.512,10 1241.1624.61241.1625.6 Grey1241.1625.7 Black 12,85 1241.1624.71241.1625.8 White 13,60 1241.1624.8Part-Nr. Elongated buttons for SMSSwitch height SMS with mountedPart-Nr. Color buttons in mm8,50 0862.8101 Yellow9,25 0862.8102 Orange10,00 0862.8103 Red10,75 0862.8104 Blue11,50 0862.8105 Green12,25 0862.8106 Grey13,00 0862.8107 Black13,75 0862.8108 White4 Packaging4.1 Packaging SMS/PMS Base module/Variable Heightloose in boxes SMS/PMS - Index 11 for SMS 100 pieces tape and reel for SMS base module - Index 23 700 pieces tape and reel for SMS elonged. base module -Index 23 450 pieces5 Qualification Tests6 ROHS Compliant分销商库存信息: SCHURTER 1241.1608。
APHIS进口物品清单和说明说明书
FedEx Regulatory News Biologics, reagents, agricultural equipment, and farm machinery potentially subject to APHIS - Tips to avoid clearance delaysMarch 1, 2021Background informationImporters of biologics, reagents, agricultural equipment, and farm machinery could require a change to their import documentation even if the products are determined not to be regulated by the United States Department of Agriculture (USDA) Animal and Plant Health Inspection Service (APHIS).What has changedAlthough the APHIS regulations for these commodities have not changed, effective March 15, 2021, the importer must provide enough information to discern whether the item is APHIS regulated by providing one of the following:• A detailed description that provides enough information to determine the product is not subject to APHIS• A statement confirming the product does not have any plant or animal material and is not subject to APHIS•Any applicable LPCO (License, Permit, Certification, Other) or required APHIS data elements if the product is subject to APHIS•An updated product database with APHIS information or disclaimsWhat are the primary impacts of these changesShippers and importers of biologics, reagents, agricultural equipment, and farm machinery should ensure clearance paperwork or databases provide the broker with enough information for clearance. Failure to do so could result in clearance delays even for unregulated merchandise.Biologics and ReagentsThese products are potentially regulated by USDA APHIS if they contain components of non-human, animal origin.If your biologic or reagent product is classified under one of the Harmonized Tariff Schedule of the United States (HTSUS) codes indicated in Appendix A below, potential clearance delays may occur if a detailed description of the product is not provided.If your product contains no components of animal origin, please ensure that your shipment documents clearly indicate that no animal origin products are contained. The following information is recommended for chemically synthesized materials classified under an AQ1 flagged HTSUS code:• A statement identifying the material (name)• A statement confirming the material is chemically synthesized• A statement confirming the material does not contain any animal or cell culture derived products• A statement confirming the material was not derived from any animal or cell culture derived productsIf your product contains components that are of animal origin, please provide the following information:•Common and scientific name of the animal from which the component was obtained•Country and region of origin for the animal product component as well as the country of origin or production for the final product•Intended use of the product•Any licenses, permits, certificates, or other (LPCO) documents that USDA APHIS requires for the entry of your product.o Please refer to the APHIS Guidelines to determine if your product qualifies for an exemption from import permit requirements. Please include allrequired statements or paperwork indicated in the applicable guideline tominimize the chance of delay.o If you are unsure if your product requires a license, permit, or otherdocument as a condition of entry, please refer to the APHIS website foradditional information.Agricultural Equipment and Farm MachineryUsed farm machinery includes vehicles, equipment, and other implements used in agricultural and farming operations. These products are regulated by USDA APHIS to prevent the introduction of foreign disease vectors that may be harmful to the U.S. agricultural industry.If your farm machinery product is classified under one the HTSUS codes indicated in Appendix B below, clearance delays may occur if a detailed description of the product is not provided.For agricultural equipment and farm machinery, please ensure that your product description indicates if the product is in “new” or “used”.For all used farm machinery, the product must be cleaned and washed prior to entry with U.S. Customs and Border Protection. Additionally, if the used farm machinery is exported from a country or region affected with Foot and Mouth Disease (FMD), then a government certificate from the exporting country is also required or the product will be refused entry into the United States.•For a list of regions affected by FMD, please refer to the APHIS Animal Health Status of Regions website.•For additional information on the government certificate requirements for used farm machinery exported from a region affected by FMD, please refer to the APHIS website for additional information.New farm equipment is considered to be unrestricted by APHIS and will not be subject to their import requirements as long the product is clean and free of dirt or other particulates.References:APHIS Manuals•Animal Product Manual•Animal Products That Do Not Require An Import Permit•Fruits and Vegetables Import Requirements (FAVIR) Online Database•Plants for Planting Manual•Seeds Not for Planting Manual•Miscellaneous Processed Products•Cut Flowers and Greenery Import ManualAPHIS Imports and ExportsAPHIS Core Message Set Questions and AnswersAppendix A – AQ1 Flagged Reagent and Biologic Products3002.11.0000 Malaria diagnostic test kits3002.12.0090 Other antisera and other blood fractions3002.13.0010 Unmixed monoclonal antibodies, not in measured doses or packed forretail sale3002.13.0090 Other unmixed immunological products, not in measured doses orpacked for retail sale3002.14.0010 Mixed Immunological products containing monoclonal antibodies, not inmeasured doses or packed for retail sale3002.14.0090 Other mixed immunological products, not in measured doses or packedfor retail sale3002.15.0010 Diagnostic reagents based on an antibody test, put up in measureddoses or packaged for retail sale3002.15.0090 Other immunological products, put up in measured doses or packagedfor retail sale3002.19.0000 Other antisera, blood fraction, and immunological products notprovided for elsewhere in the tariff schedule3002.20.xxxx Vaccines for human medicine3002.90.1000 Ferments preparations (excluding yeasts)3002.90.5120 Antiallergenic preparations3002.90.5150 Other toxins, cultures of micro-organisms, and similar products notprovided for elsewhere in the tariff schedule3006.20.0000 Blood-grouping reagents3822.00.1010 Diagnostic or lab reagents containing antigens or antisera, alsocontaining methyl chloroform or carbon tetrachloride3822.00.1090 Diagnostic or lab reagents containing antigens or antisera, notcontaining methyl chloroform or carbon tetrachloride 3822.00.5050 Diagnostic reagents based on a polymerase chain, not containingantigens or antisera3822.00.5050 Other diagnostic or lab reagents not provided for elsewhere in the tariffscheduleAppendix B – AQ1 Flagged Farm Machinery Products8424.41.1000 Agricultural or horticultural sprayers, Portable sprayers, Sprayers 8424.41.9000 Agricultural or horticultural sprayers, Portable sprayers, Other 8424.49.0000 Agricultural or horticultural sprayers, Other than Portable sprayers 8424.82.0010 Self-propelled, center pivot irrigation equipment 8424.82.0020 Other, irrigation equipment8424.82.0090 Irrigation equipment, other8429.11.0090 Track laying bulldozers, angledozers, used or rebuilt 8429.19.0090 Bulldozers, angledozers, other, used or rebuilt 8429.20.0000 Graders and levelers8429.30.0060 Scrapers, used or rebuilt8429.51.1065Self-propelled bulldozers, angledozers, graders, levelers,scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers: Mechanical shovels, excavators and shovel loaders: Front-end shovel loaders: Wheel-type: Used or rebuilt8429.51.5060 Front-end loader other, used or rebuilt 8429.52.1050 Backhoes etc., used or rebuilt8429.52.5090Self-propelled bulldozers, angledozers, graders, levelers,scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers: Machinery with a 360˚ revolving superstructure: Other: Used or rebuilt8429.59.1090 Backhoes, shovels, etc., other, used or rebuilt 8429.59.5080 Mechanical shovels, excavators etc., other, used or rebuilt 8432.10.0020 Moldboard plows except listers 8432.10.0040 Disc plows8432.10.0060 Plows, other, nspf8432.21.0000 Disc harrows8432.29.0040 Cultivators, tractor drawn or mounting8432.29.0060 Rotary tillers, walk behind type8432.29.0080 Cultivators, other, nspf8432.29.0090 Scarifiers other, nspf8432.31.0010 Planters and transplanters, No-till direct seeders, planters and transplanters 8432.31.0090 Seeders, No-till direct seeders, planters and transplanters 8432.39.0010 Planters and transplanters, other8432.39.0090 Seeders, other8432.41.0000 Manure spreaders8432.42.0000 Fertilizer distributors8432.80.0010 Machinery for soil prep, lawn, other, tow behind sweepers 8432.80.0080 Machinery for soil prep, lawn, etc., other, nspf8432.90.0010 Agr mach prt,rd whl w/out tire8432.90.0020 Ag mach pt,whl/tire assemblies8432.90.0040 Plow parts8432.90.0050 Harrows, scarifiers, cultivators, etc., parts8432.90.0060 Seeders, planters, etc., parts8432.90.0081 Machinery parts other, nspf8433.53.0000 Root or tuber harvesting machines8433.59.0010 Field forage harvesters8433.59.0090 Harvesting and threshing machinery other, nspf8433.60.0010Harvesting or threshing machinery, including straw or fodderbalers; grass or hay mowers; machines for cleaning, sortingor grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof: Machines for cleaning, sorting orgrading eggs, fruit orother agricultural produce: Machines for cleaning, sorting or grading eggs8433.60.0090Harvesting or threshing machinery, including straw or fodderbalers; grass or hay mowers; machines for cleaning, sortingor grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof: Machines for cleaning, sorting orgrading eggs, fruit orother agricultural produce: Other8434.10.0000 Milking machines8434.20.0000 Dairy machinery8434.90.0000 Milking machines and dairy machinery parts8436.21.0000Other agricultural, horticultural, forestry, poultry-keeping orbee-keeping machinery, including germination plant fitted withmechanical or thermal equipment; poultry incubators and brooders; parts thereof: Poultry-keeping machinery; poultry incubators and brooders: Poultry incubators and brooders8436.29.0000Other agricultural, horticultural, forestry, poultry-keeping orbee-keeping machinery, including germination plant fitted withmechanical or thermal equipment; poultry incubators and brooders; parts thereof: Poultry-keeping machinery; poultry incubators andbrooders: Other8436.80.0040 Barn and barnyard machines8436.80.0090Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders; parts thereof: Other machinery: Other: Other: Other8436.91.0080 Machine parts for poultry keeping, other 8436.99.0040 Barn or barnyard machinery parts8438.50.0010Machinery, not specified or included elsewhere in this chapter,for the industrial preparation or manufacture of food or drink,other than machinery for the extraction or preparation of animalor fixed vegetable fats or oils; parts thereof: Machinery for the preparation of meat or poultry: Meat- and poultry-packing plant machinery8438.50.0090Machinery, not specified or included elsewhere in this chapter,for the industrial preparation or manufacture of food or drink,other than machinery for the extraction or preparation of animalor fixed vegetable fats or oils; parts thereof: Machinery for the preparation ofmeat or poultry: Other8438.80.0000Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable fats or oils; parts thereof: Other machinery8438.90.9060Machinery, not specified or included elsewhere in this chapter,for the industrial preparation or manufacture of food or drink,other than machinery for the extraction or preparation of animalor fixed vegetable fats or oils; parts thereof: Parts: Other: Of machinery for thepreparation of meat orpoultry8438.90.9090Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable fats or oils; parts thereof: Parts: Other: Other8453.10.0000Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines; parts thereof: Machinery for preparing, tanning orworking hides, skins or leather8465.10.0050Machine tools (including machines for nailing, stapling, gluing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials: Machines which can carry out different types of machining operations without tool change between such operations: Other8465.20.1000 Sawing machine tools, oth, nspf 8465.20.8000 Splitting mach tools, etc., oth 8465.91.0091 Sawing machine tools, oth, nspf 8465.92.0091 Planing, etc., mach tools, ot 8465.95.0091 Drilling/mort mach tools, other 8465.96.0051 Splitting mach tools, etc., oth8465.99.0250Machine tools (including machines for nailing, stapling, gluing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials: Other: Other: Other8479.20.00.00 Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter; parts thereof: Machinery for theextraction or preparation of animal or fixed vegetable fats or oils8701.30.10.90 Track-laying tractor: used; suitable for agricultural8716.80.10.00 Vehicle not mechanically propelled: farm wagon and cart 8716.80.5090 Nonmech. Propelled vehicle: other9801.00.1037 U.S. goods returned:8419.31,8424.81,8424.90,8429.11,8429.19etc 9801.00.1045 Other U.S. goods returned: in chapter 84; not advanced in value 9801.00.1063 Other U.S. goods returned: in 8701; not advanced in value9801.00.1074 U.S. Goods Provided For In Chapter 87, Others, Returning, Without HavingBeen Advanced In Value Or Improved In Condition By Any Process 9817.00.5000 Machinery, equipment & implements used for agriculture/horti You can’t make the rules, but with FedEx, you can master them.FedEx Regulatory NewsKeep up with the latest alerts, trade-related rules, updates and learning opportunities. Sign up to receive FedEx Regulatory News emails.For more updates and news about regulatory topics, visit Regulatory News.。
APHK1608SECK资料
元器件交易网
PACKING & LABEL SPECIFICATIONS
APHK1608SECK
SPEC NO: DSAC0592 APPROVED: WYNEC
REV NO: V.5 CHECKED: Allen Liu
DATE: MAY/08/2007 DRAWN: Y.L.LI
元器件交易网
1.6x0.8mm SMD CHIP LED LAMP
Part Number: APHK1608SECK Super Bright Orange
Features
1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT.
Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature
REV NO: V.5 CHECKED: Allen Liu
arthurcclarke英文介绍
arthurcclarke英文介绍Arthur C. Clarke was a British science fiction writer, science writerArthur C. Clarke was a British science fiction writer, science writer, futurist, and author of popular science books. He is best known for his 1948 short story "The Sentinel", which is widely considered to be the first example of hard science fiction, as well as for his collaboration with Stanley Kubrick on the screenplays for the films "2001: A Space Odyssey" (1968) and "A Clockwork Orange" (1971).Clarke's writing spanned a wide range of topics, including space exploration, geopolitics, and artificial intelligence. He was a prolific writer, producing over 100 books during his lifetime, many of which have become classics of science fiction and science fact.In addition to his writing, Clarke was also a passionate advocate for space exploration and the search for extraterrestrial life. He was a strong supporter of NASA's Project Mercury and played a key role in the development of the geostationary satellite concept, which has become an essential part of modern telecommunications.Throughout his career, Clarke received numerous awards and honors for his contributions to science fiction and science fact. In 2000,he was awarded the Presidential Medal of Freedom by President Bill Clinton, and in 2008, he was posthumously awarded the Congressional Gold Medal.Despite his passing in 2018, Arthur C. Clarke's legacy continues to inspire generations of readers and writers alike. His visionary ideas and groundbreaking work have helped shape our understanding of the universe and our place within it, making him one of the most influential figures in science fiction and science fact history.。
P6KE160CA中文资料
P6KE6.8(C)A - P6KE440(C)A1:1Scale 1:1 on letter size paperDimensions shown below are in:inches [millimeters]Part Weight per unit (gram): 0.4TRADEMARKSACEx™CoolFET™CROSSVOLT™E 2CMOS TM FACT™FACT Quiet Series™FAST ®FASTr™GTO™HiSeC™The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.As used herein:ISOPLANAR™MICROWIRE™POP™PowerTrench™QS™Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8TinyLogic™1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a lifesupport device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status DefinitionAdvance InformationPreliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.Formative or In DesignFirst ProductionFull ProductionNot In ProductionDISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.UHC™VCX™。
Hotstuff
21DIOR⿊⾊⻛暴 CHIFFRE ROUGE回归030CARTIER造型艺术 创意⽆限026222024年，AUDEMARS PIGUET爱彼在早春三⽉推出新作，⼗余款作品涵盖了皇家橡树、皇家橡树离岸型以及CODE 11.59这⼏⼤爱彼近年来最受世⼈关注的核⼼系列。
此次亮相，最重磅的作品是⼀款以全新材质打造的Royal Oak皇家橡树系列⾃动上链浮动式陀⻜轮镂空腕表，独特⾦属⾊泽与复杂机械结构相得益彰，呈现出复杂制表⼯艺与当代设计⻛格交映⽽⽣的和谐美感。
新款41毫⽶Royal Oak皇家橡树系列⾃动上链浮动式陀⻜轮镂空腕表是爱皇家橡树系列的另⼀款新作，是彼⾸款以砂⾦打造的时计作品。
这⼀18K合⾦材质由⻩⾦、铜和钯熔合⽽成，因呈现出阳光下⾦⾊砂砾的温润光泽⽽得名。
其⾊泽介于⽩⾦与玫瑰⾦之间，其视觉感官可随光线⽽产⽣微妙变化。
此外，砂⾦还具备不易变⾊、经久耐⽤的特性。
砂⾦表壳和链带采⽤爱彼标志性的缎⾯拉丝与抛光倒⻆交替润饰。
⼋⻆形表圈的加宽倒⻆斜⾯经由镜⾯抛光，与梯形链带各链节和固定链节的抛光倒⻆相得益彰，凸显出这⼀贵⾦属在光影中的迷⼈质感。
爱彼联袂美国知名⾳乐⼈、与品牌有着⻓期深厚渊源的好友John Mayer，共同推出的限量万年历腕表。
在这次合作中，John Mayer结合⾃⾝审美视⻆，与品牌共同打造出⼀款拥有独特设计的腕表作品，这枚万年历腕表以经典优雅的18K⽩⾦表壳搭配深蓝⾊“晶莹夜空（Crystal Sky）”表盘，营造出星空浩瀚、熠熠闪耀的迷⼈效果。
表盘上采⽤物理⽓相沉积（PVD）⼯艺呈现深蓝⾊调，既突显出图案的纵深感，亦衬托出丰富的光影变幻，⽩⾊⽇历功能显⽰精⼼印制于副表盘的蓝⾊边缘区域，⽽⽩/ Chaos 资料提供Hot Stuff 钟表2024/04Royal Oak皇家橡树系列万年历腕表（左）18K白金材质，蓝色“晶莹夜空”表盘，尺寸41mm，Calibre 5134自动上链机心，动力储存40小时，时分秒显示，万年历功能，防水20米Royal Oak皇家橡树系列⾃动上链浮动式陀⻜轮镂空腕表（右）18K砂金材质，镂空表盘，尺寸41mm， Calibre 2972自动上链机心，动力储存65小时，时分显示，浮动陀飞轮，防水50米。
FM1608中文资料
第 1页
管脚描述 管脚名称 A0-A12 DQ0-7 /CE
/OEΒιβλιοθήκη /WEVDD VSS类型 IN I/O IN
IN
IN
Supply Supply
描述 地址：13 位地址线选择内存的某一字节，地址值在/CE 的下降沿被锁存。 数据：访问 FRAM 内存的双向 8 位数据总线 芯片使能：当为低电平时选中芯片，在/CE 的下降沿时地址被内部锁存，在下一 个下降沿来临前，在/CE 为低电平时地址值的改变均被忽略。 输出使能：低电平有效，在读周期中允许输出缓冲区输出，使/OE 变为高电平后 将使 DQ 转变为三态状态。 输入使能：低电平时，允许将数据总线上数据写入在/CE 的下降沿时锁存的地址 单元
The DATASHEET
China Service Center of RAMTRON
absorbed in ferroelectrics professional technology and attentive service
特性
64K 位铁电非易失性随机存储器 l 结构容量为8,192*8位 l 1万亿次以上的读写次数 l 掉电数据保持10年 l 写数据无延时 l 先进的铁电制造工艺
FRAM 的优点 虽然电池后备 SRAM 是一个成熟的和已确立 的方案，但它有很多缺点，这些缺点直接或间 接地由于电池的存在，FRAM 使用具有天然非 易失性的存储机制，它不需要电池，这样就自 然地避免了这样的缺点。简要地设计注意事项 列于下面。
结构问题 1 成本 ＳＲＡＭ 加后备电池的制造和元件成本很高，拥有单片 结构的ＦＲＡＭ必然成为低成本解决方案，另外当进行 表面贴装时不需要电池内建的重复步骤，这样装配就 得到改进而且提高了效率，在采用双列直插电池后备 模组中，用户必须使用穿孔装配，而且不能用水清洗 线路板。 2 湿度 一个典型的电池后备SRAM模组适合的条件是60ºC, 90% Rh，之所以选择这样的条件是因为多元件装配 易受到潮气及灰尘的攻击，FRAM 通过 HAST（highly accelerated stress test）认证，它认证的条件是120ºC at 85% Rh, 24.4 psia at 5.5V。
日本尼康Pronea 6i单反摄影机说明书
Program modes
..P*
Flexible Program
m
~
Print types
ntleimprint Language also can be selected
tIllla..
Print quantity
o
Self-timer
ME SET as you Ike on a single frame for creaIMty
Ctype ~
m Htype
Pronea 61 with IX-Nlkkor 24-70mm f/3 ,5-5,6
6
MEMORIES FOREVER
Pronea 61with IX-Nikkor 20-60mm f/3.S-S.6
I LOVE 'r'DV
- 1996
o I/SEP/ 96 2 ' OOPM #6 ID 123-456
QUICK RECALL
QR You can set your favorite combInatIonI of aI
1m the controls, then Instantly recaI up to three
sets of combinations. It's lice having three
a guide
a flash sync
It' ,hj....rIItI effectively with
back of the camera. the LCD panel can ............".
In the dark and provides comprehensive ~lrnAln 'I~V"
MCL1608V2多层芯片感应器数据表说明书
MCL1608V2-101-R MCL1608V2-3R3-R MCL1608V2-6R8-R MCL1608V2-8R2-RMCL1608V2Multilayer chip inductorProduct features• 0603 (1608 metric) package • High self resonant frequency (SRF)•Multilayer monolithic construction yields high reliability• Suitable for wave and reflow soldering • Inductance range from 1.0 nH to 470 nH •Moisture sensitivity level (MSL): 1Applications• Industrial connectivity (IoT)•Wireless communiations• Bluetooth • WiFi •Antenna• Machine-to-machine (M2M) • Mobile phones •Wearable devices • Wireless LAN• Computing/gaming consoles • Broadband components •RF transciever modulesEnvironmental data•Operating temperature range: -40 °C to +85 °C (ambient plus self-temperature rise)•Solder reflow temperature:J-STD-020 (latest revision) compliantPb HALOGENHF FREE2Technical Data 10927Effective June 2019MCL1608V2Multilayer chip inductor/electronicsProduct specificationsPart numberOCL (nH) ±5%I Rated(mA) maximumDCR (Ω)maximum @ +25°CSRF(MHz) minimumQmimimumTest frequency (MHz)Test voltage (mV)MCL1608V2-1R0-R 1.0 ±0.3nH 5000.0510000810050MCL1608V2-1R2-R 1.2 ±0.3nH 5000.0510000810050MCL1608V2-1R5-R 1.5 ±0.3nH 5000.106000810050MCL1608V2-1R8-R 1.8 ±0.3nH 5000.106000810050MCL1608V2-2R2-R 2.2 ±0.3nH 5000.106000810050MCL1608V2-2R7-R 2.7 ±0.3nH 5000.1260001010050MCL1608V2-3R3-R 3.3± 0.3nH 5000.1560001010050MCL1608V2-3R9-R 3.9 ±0.3nH 5000.1660001010050MCL1608V2-4R7-R 4.7 ±0.3nH 5000.2060001010050MCL1608V2-5R6-R 5.6 ±0.3nH 5000.2550001010050MCL1608V2-6R8-R 6.85000.3050001010050MCL1608V2-8R2-R 8.25000.3545001010050MCL1608V2-100-R 10.03000.4035001210050MCL1608V2-120-R 12.03000.4530001210050MCL1608V2-150-R 15.03000.5023001210050MCL1608V2-180-R 18.03000.5522001210050MCL1608V2-220-R 22.03000.6020001210050MCL1608V2-270-R 27.03000.6517001210050MCL1608V2-330-R 33.03000.7015001210050MCL1608V2-390-R 39.03000.7014001210050MCL1608V2-470-R 47.03000.7012001210050MCL1608V2-560-R 56.03000.7511001210050MCL1608V2-680-R 68.03000.859001210050MCL1608V2-820-R 82.0300 1.00800810050MCL1608V2-101-R 100300 1.20700810050MCL1608V2-121-R 120200 1.40600810050MCL1608V2-151-R 150200 1.60500810050MCL1608V2-181-R 180200 1.90400810050MCL1608V2-221-R 220200 2.40350810050MCL1608V2-271-R 270150 2.60350810050MCL1608V2-331-R 330150 2.80350810050MCL1608V2-391-R 390150 3.20300810050MCL1608V2-431-R 430150 3.4028085050MCL1608V2-471-R4701503.60250850501. Test frequency and voltage are for OCL and Q at +25 °C2. Resistance to soldering heat: +260 ±5 °C for 10 ± 1 second3. At low temperature resistance (-40 ±2°C) the inductance change is within ±10% and the Q within ±20%4. At high temperature resistance (+85 ±2°C) the inductance change is within ±10% and the Q within ±20%5 At high temperature load (+85 ±2°C) the inductance change is within ±10% and the Q within ±20%6. Rated I: When rated I is applied to the product, self-temperature rise will be 40 °C or less. 7. Part Number Definition: MCL1608V2-xxx-R MCL1608 = Product code and size V2= Version indicatorxxx= inductance value in nH, R= decimal point,If no R is present then last character equals number of zeros -R suffix = RoHS compliant3Technical Data 10927Effective June 2019MCL1608V2Multilayer chip inductor /electronics No part markingAll soldering surfaces to be coplanar within 0.1 millimeters Tolerances are ±0.2 millimeters unless stated otherwisePad layout tolerances are ±0.1 millimeters unless stated otherwise Do not route traces or vias underneath the inductorDimensions (mm)SchematicPart Number L W T a A B CMCL1608V2-xxx-R 1.6 ±0.200.80 ±0.200.80 ±0.200.30 ±0.20 1.2 ±0.100.9 ±0.1004 ±0.10Packaging information (mm)Drawing not to scaleSupplied in tape and reel packaging, 4000 parts per 7” diameter reelW ±0.38.00F±0.05 3.50E1±0.10 1.75E2 Min 6.25P0±0.10 4.00P1±0.2 4.00P2±0.1 2.001.50D0+0.10/-0A0 1.1±0.20B0 1.9±0.20T Max 1.10T1 Maxna4MCL1608V2Multilayer chip inductor/electronicsFrequency MHzQ vs frequency100100001000Frequency MHz5Technical Data 10927Effective June 2019MCL1608V2Multilayer chip inductor /electronics Solder reflow profileTable 1 - Standard SnPb solder (T c )Package ThicknessVolume mm3 <350Volume mm3 ≥350<2.5 mm)235 °C 220 °C ≥2.5 mm220 °C220 °CTable 2 - Lead (Pb) free solder (T c )Package thicknessVolume mm 3 <350Volume mm 3350 - 2000Volume mm 3 >2000<1.6 mm 260 °C 260 °C 260 °C 1.6 – 2.5 mm 260 °C 250 °C 245 °C >2.5 mm250 °C245 °C245 °CT e m p e r a t u r eT LT PReference J-STD-020Profile featureStandard SnPb solderLead (Pb) free solderPreheat and soak • Temperature min. (T smin )100 °C 150 °C • Temperature max. (T smax )150 °C 200 °C • Time (T smin to T smax ) (t s )60-120 seconds 60-120 seconds Average ramp up rate T smax to T p 3 °C/ second max. 3 °C/ second max.Liquidous temperature (T l ) Time at liquidous (t L )183 °C60-150 seconds 217 °C60-150 seconds Peak package body temperature (T P )*Table 1Table 2Time (t p )** within 5 °C of the specified classification temperature (T c )10 seconds**10 seconds**Average ramp-down rate (T p to T smax ) 6 °C/ second max. 6 °C/ second max.Time 25 °C to peak temperature6 minutes max.8 minutes max.* Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum.** Tolerance for time at peak profile temperature (t p ) is defined as a supplier minimum and a user maximum.EatonElectronics Division 1000 Eaton Boulevard Cleveland, OH 44122United States/electronics © 2019 EatonAll Rights Reserved Printed in USAPublication No. 10927 BU-MC19059June 2019MCL1608V2Multilayer chip inductorTechnical Data 10927Effective June 2019Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express writtenapproval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin.T e m p e r a t u r eTimeT T T T Wave solder profileReference EN 61760-1:2006Profile featureStandard SnPb solderLead (Pb) free solderPreheat • Temperature min. (T smin )100 °C 100 °C • Temperature typ. (T styp )120 °C 120 °C • Temperature max. (T smax )130 °C 130 °C • Time (T smin to T smax ) (t s )70 seconds 70 seconds D preheat to max Temperature150 °C max.150 °C max.Peak temperature (T P )*235 °C – 260 °C 250 °C – 260 °C Time at peak temperature (t p )10 seconds max5 seconds max each wave 10 seconds max5 seconds max each wave Ramp-down rate~ 2 K/s min ~3.5 K/s typ ~5 K/s max ~ 2 K/s min ~3.5 K/s typ~5 K/s max Time 25 °C to 25 °C4 minutes4 minutesManual solder+350 °C, 4-5 seconds. (by soldering iron), generally manual, hand soldering is not recommended.Eaton is a registered trademark.All other trademarks are property of their respective owners.Follow us on social media to get the latest product and support information.MCL1608V2-101-R MCL1608V2-3R3-R MCL1608V2-6R8-R MCL1608V2-8R2-R。
美国专业左握式 стра托卡斯特 产品说明书
PARTS LAYOUT2105171213143736101516383940131718192024222317181913181925262124283233465368911273431293233313032333135383940PARTS LISTREF#DESCRIPTION PARTNUMBER 1BODY AM PRO STRAT LH 3TS0048702500 1BODY AM PRO STRAT LH OWT0056239505 1BODY AM PRO STRAT LH BLK0056239506 2NECK ASSY AM PRO STRAT LH RW7709884000 2NECK ASSY AM PRO STRAT LH MPL7709885000 3KEY 2-PIN MTG TALL LH 0073119000 4KEY 2-PIN MTG SHORT LH0073120000 5KEY WASHER 0053106049 6KEY BUSHING 0058820049 7STRING TREE W/HARDWARE0994911000 8SCREW SMAB 3 X 3/8 RHP STL NI0011357049 9NECK PLATE CORONA CA TILT W/HARDWARE0991445100 10SCREW SMA 8 X 1-3/4 OHP NI0015636049 11SET SCREW 1/4-20 X 3/8 OP NI HEX0031571000 12PICKGUARD STRAT AM STD LH P/B/P0056199000 12PICKGUARD STRAT AM STD LH MG/BLK/MG0055320000 13SCREW SMAB 4 X 1/2 OHP NI0015578049 145-WAY SELECTOR SWITCH0991367000 15SCREW MA 6-32 X 5/8 RH NI0994925000 16KNOB PICKUP SWITCH VINT AGED WHITE0994938000 17CONTROL 250K 10% R-AUDIO SPLIT SHAFT0063892000 18NUT HEX 3/8-32 X 3/320016352049 19WASHER LCK INTNL 3/8 X 500 X .02 NI0022384049 20CAPACITOR CD 1200pF 1000V 10%0065862000 21CAPACITOR MPF RDL .022MF 250 V 10%0024832049 22RES CF 1/4W 20K 5%0029006001 23RES CF 1/4W 150K 5%0024999001 24KNOBS STRAT 1-VOL 2-TONE AGED WHITE 0991369000 25FERRULE JACK CHROME 0991940000 26JACK PHONE OPEN CIRCUIT 110021956049 27BRIDGE ASSY AM PRO STRAT LH7709951000 27A BRIDGE PLATE TREM AM PRO STRAT LH CHROME7709900000*=NOT PICTURED IN DIAGRAMREF#DESCRIPTION PARTNUMBER 27B BLOCK TREMOLO AM DLX STRAT LH SILVER MET0077091000 27C BRIDGE SECTION ASSY NI AS STRAT SHORT0075123101 27D BRIDGE SECTION ASSY NI AS STRAT TALL0075123102 27E SPRING BRIDGE #1932 0019281049 27F SCREW M 4-40 X 5/8 RHP NI0015693049 27G SCREW M 8-32 X 3/8 FHP NI 0019656049 27H SPRING CLIP ULTRA0036531000 27I BUSHING NYL NAT .31 OD X .191 ID X .87 L7710005000 27J SET SCREW 10-32 X 3/16 HEX SKT FP BLX 0036615049 28PICKUP AM PRO SHAW BRIDGE LH AGED WHITE7709879000 29PICKUP AM PRO SHAW MIDDLE LH AGED WHITE7709891000 30PICKUP AM PRO SHAW NECK LH AGED WHITE7709893000 31PICKUP COVERS STRAT VINTAGE AGED WHITE0053824049 32TUBING LATEX CUT .300 X 1/8 ID X 1/4 OD0994916000 33SCREW TF 6-32 X 3/4 RHP STL NI0099346000 34BRIDGE PIVOT POST ASSY0093273000 35BACK COVER STRAT STD W/SLOT LH MG/BLK/MG0055322000 35BACK COVER STRAT STD W/SLOT LH P/B/P0056214000 36SPRING TREMOLO TENSION BLX 0018671049 37TREM CLAW SPRING TENSION ZINC0010272100 38STRAP BUTTONS CHROME W/HARDWARE0063267049 39FELT WASHERS WHITE0994930000 39FELT WASHER BLACK0994929000 40WOOD SCREW 6 X 1 OHP NI0016188049 *CASE AM ELITE GUITAR7710537000 *TRMOLO ARM AM PRO STRAT RH POLISHED SS7709929000 *TREMOLO ARM KNOB VINT AGED WHITE0994933000 *WRENCH HEX KEY 1/80023811049 *WRENCH HEX KEY .0500018531049 *WRENCH HEX KEY 1/160021109049 *WRENCH HEX KEY 3/320018622000*=NOT PICTURED IN DIAGRAMWIRING ASSEMBLY1200p F1200p FVOLUME CONTROL5-WAY SWITCHTONE 1CONTROLBLACK & WHITE WIRES FROM OUTPUTBLACK WIRE TO TREM CLAWGROUND LUG TO BODY CAVITYTONE 2 CONTROLCAPACITOR .022µFNECK PICKUPMIDDLE PICKUPBRIDGE PICKUPCAPACITOR 1200pFRESISTOR 20K ΩSHRINK TUBE CAPACITOR LEGSRESISTOR 150K ΩSWITCH AND CONTROL FUNCTION43215TONE CONTROLOF 5-WAY SWITCHINDICATES POSITION 5-WAYSWITCH POSITIONPICKUP IS OFFPICKUP IS ON 1BRIDGE PICKUP5 WAY SWITCH POSITIONNECK PICKUPMIDDLE PICKUPT1T1 & T2T2T2T2MASTER VOLUME 5-WAY SWITCHTONE 1 (T1)TONE 2 (T2)NECK PICKUP MIDDLE PICKUPBRIDGE PICKUPADDITIONAL SPECIFICATION DETAIL.054”.094”2-7/16”.820”.920”10-32THREAD.050” HEXØ.375”1/8” HEXSTAGGERED TUNING MACHINE SET W/HDWR P/N 0990820100OUTER SHAFT DIAMETER .394”TUNING MACHINE THRU-HOLEINNER DIAMETER .404”LOGO: AMERICAN PRO STRAT LHAPPLIED UNDER THE FINISHTRUSS ROD NUT P/N 0994943000TRUSS ROD ADJUSTMENT WRENCH:1/8” HEX KEY P/N 0023811049SADDLE HEIGHT ADJUSMENT WRENCH:.050” HEX KEY P/N 0018531049SHORT: P/N 0075536000TALL: P/N 00753840001ST FRET PROFILE12TH FRET PROFILENECK PROFILE: MODERN DEEP “C”FRET SIZE: JUMBO NARROW(FRET DIMENSIONS ARE BEFORE INSTALLATION)Ø.404”Ø.394”PLEASE NOTE: AS EACH NECK IS SANDED & FINISHED BY HAND, THICKNESS DIMENSIONS MAY VARY SLIGHTLY FROMTHOSE SHOWN.SADDLE HEIGHT ADJUSTMENT SCREWS:PICKUP SPECIFICATIONSNECKMIDDLE BRIDGEDC RESISTANCE 6.1 - 6.7KΩ6.4 -7.0KΩ6.4 - 7.0KΩMAGNETS ALNICO 2 & 3BEVELEDALNICO 5 & 2BEVELEDALNICO 5BEVELEDPOLARITY SOUTHNORTHSOUTHPOSITION。
LTF1608L-FP2R4H资料
LTF1608L Series
MULTILAYER CERAMIC LOWPASS FILTER
TYPICAL CHARACTERISTICS
LTF1608L-F1R7L
LTF1608L-FP1R7H
January 2002
2002 TOKO America, Inc. All Rights Reserved Printed in USA CF-225-LTF1608L
Ripple (dB) max. 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50
Attenuation at 2x[Fo ± BW] (dB) min. 25 25 35 25 35 25 35 25 35
Attenuation at 3x[Fo ± BW] (dB) min. 18 18 25 18 25 18 25 18 25
January 2002
2002 TOKO America, Inc. All Rights Reserved Printed in USA CF-225-LTF1608L
2
元器件交易网
LTF1608L Series
MULTILAYER CERAMIC LOWPASS FILTER
TOKO America, Inc. 1250 Feehanville Drive, Mt. Prospect, IL 60056 Tel: 800-PIK-TOKO or 847-297-0070 Fax: 847-699-7864 Web: http://
January 2002
MULTILAYER CERAMIC LOWPASS FILTER
EQUIVALENT CIRCUITS
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Hyper Red 75 30 185 5 -40°C To +85°C -40°C To +85°C
Units mW mA mA V
SPEC NO: DSAD1112 APPROVED: WYNEC
REV NO: V.5 CHECKED: Allen Liu
PAGE: 5 OF 5 ERP: 1204000405
元器件交易网
1.6x0.8mm SMD CHIP LED LAMP
Part Number: APHK1608SURCK Hyper Red
Features
1.6mmx0.8mm SMT LED, 0.7mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT.
元器件交易网
PACKING & LABEL SPECIFICATIONS
APHK1608SURCK
SPEC NO: DSAD1112 APPROVED: WYNEC
REV NO: V.5 CHECKED: Allen Liu
DATE: MAY/08/2007 DRAWN: Y.L.LI
Description
The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications.
DATE: MAY/08/2007 DRAWN: Y.L.LI
PAGE: 3 OF 5 ERP: 1204000405
元器件交易网
APHK1608SURCK
Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1)
SPEC NO: DSAD1112 APPROVED: WYNEC
REV NO: V.5 CHECKED: Allen Liu
DATE: MAY/08/2007 DRAWN: Y.L.LI
PAGE: 1 OF 5 ERP: 1204000405
元器件交易网
Selection Guide
Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature
Tape Specifications (Units : mm)
SPEC NO: DSAD1112 APPROVED: WYNEC
REV NO: V.5 CHECKED: Allen Liu
DATE: MAY/08/2007 DRAWN: Y.L.LI
PAGE: 4 OF 5 ERP: 1204000405
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 650 635 28 35 1.95 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V
Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APHK1608SURCK Hyper Red (InGaAlP) WATER CLEAR 70 Typ. 200 Viewing Angle [1] 2θ1/2 90°
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%.
DATE: MAY/08/2007 DRAWN: Y.L.LI
PAGE: 2 OF 5 ERP: 1204000405
元器件交易网
Hyper Red
APHK1608SURCK
SPEC NO: DSAD1112 APPROVED: WYNEC
REV NO: V.5 CHECKED: Allen Liu