330495-1中文资料
批准黑龙江省分析测试中心计量认证的产品(参数)
证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第1页证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第2页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8 页第3页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第4页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第5页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第6页证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第7页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共8页第8页扩项批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11 页第 1 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11 页第 2 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11 页第 3页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共11页第 4 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11 页第 5 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共11页第 6 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共11页第 7页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11页第 8 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11页第 9 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11页第 10 页批准黑龙江省分析测试中心计量认证的产品（参数）证书号：（）量认（黑）字（）号有效期：200 年月日～200 年月日共 11页第 11 页。
Canon Cartridge 054 H Black 安全数据表说明书
SECTION 1: Identification of the substance/mixture and of the company/undertaking1.1. Product Identifier Product name Canon Cartridge 054 H Black Product Code(s)3028C0021.2. Relevant identified uses of the substance or mixture and uses advised against UseToner for electrophotographic machines1.3. Details of the supplier of the safety data sheet Supplier ImporterCanon Europa N.V.Bovenkerkerweg 59, 1185XB Amstelveen, The Netherlands +31 20 5458545, +31 20 5458222Manufacturer Canon Inc.30-2, Shimomaruko 3-Chome, Ohta-ku, Tokyo 146-8501, Japan 1.4. Emergency Telephone Number *1 Kontakt Giftlinien på tlf.nr.: 82 12 12 12 (åbent 24 timer i døgnet). Se punkt 4 om førstehjælp.*2 Only for the purpose of informing medical personnel in cases of acute intoxications.*3 Ask for Poison InformationSECTION 2: Hazards identification2.1. Classification of the substance or mixtureClassification according to Regulation (EC) No 1272/2008Not classified2.2. Label ElementsLabelling according to Regulation (EC) No 1272/2008112Safety Data SheetMalta 112Bulgaria Netherlands +31 (0)30-2748888 [*2]112Poland 112Version : 01Portugal +351 808 250 143CroatiaRomania +40 21 318 36 06+385 (0)1-23-48-342Slovakia +421 2 5477 4166Slovenia 112Cyprus Spain1121401Sweden 112 [*3]Issuing date : 02-Nov-2018United Kingdom 111 (UK only)Czech Republic Iceland 112+420 224919293Liechtenstein 145Norway+47 22 59 13 00Denmark Switzerland145+45 82 12 12 12 [*1]Estonia 16662SDS # : TCW 1791 N - 01 EU ENFinland +358 (0)9 471977France +33 (0)1 45 42 59 59Greece +30 210 7793777Austria Hungary +36 80 20 11 99+43 (0) 1 406 43 43Italy+39 (0)55 7947819Revision date : -Latvia+371 67042473Belgium Lithuania +370 687 53378+32 (0) 70 245 245LuxembourgHazard pictogramsNot requiredSignal wordNot requiredHazard statementsNot requiredPrecautionary statementsNot requiredOther InformationNone2.3. Other HazardsNoneSECTION 3: Composition/information on ingredients 3.2. MixturesChemical name CAS-No EC-No REACH registrationnumber Weight %Classification (Reg.1272/2008)Note toOtherHazardsStyrene acrylate copolymer CBI CBI None75 - 85NoneWax CBI CBI None 5 - 10NoneCarbon black1333-86-4215-609-9CBI 5 - 10NoneAmorphous silica7631-86-9231-545-401-2119379499-16-xxxx 1 - 3NoneFull texts of Hazard statement(s) are listed in SECTION 16Note to Other Hazards : The following substance(s) is (are) marked with (1), (2) and/or (3)- (1) Substance for which EU Occupational Exposure Limit(s) is (are) established (See SECTION 8)- (2) PBT substance or vPvB substance under Regulation (EC) No 1907/2006- (3) Substance listed in Candidate List of SVHC for Authorisation under Regulation (EC) No 1907/2006SECTION 4: First aid measures4.1. Description of first aid measuresInhalation Move to fresh air. Get medical attention immediately if symptoms occur.Ingestion Rinse mouth. Drink 1 or 2 glasses of water. Get medical attention immediately if symptomsoccur.Skin Contact Wash off immediately with soap and plenty of water. Get medical attention immediately ifsymptoms occur.Eye Contact Flush with plenty of water. Get medical attention immediately if symptoms occur.4.2. Most important symptoms and effects, both acute and delayedInhalation None under normal use. Exposure to excessive amounts of dust may cause physicalirritation to respiratory tract.Ingestion None under normal use.Skin Contact None under normal use.Eye Contact None under normal use. May cause slight irritation.Chronic Effects None under normal use. Prolonged inhalation of excessive amounts of dust may cause lungdamage.4.3. Indication of any immediate medical attention and special treatment neededNoneSECTION 5: Firefighting measures5.1. Extinguishing mediaSuitable extinguishing mediaUse CO 2, water, dry chemical, or foam.Unsuitable extinguishing mediaNone5.2. Special hazards arising from the substance or mixtureSpecial HazardMay form explosive mixtures with air.Hazardous combustion productsCarbon dioxide (CO 2), Carbon monoxide (CO)5.3. Advice for firefightersSpecial protective equipment for fire-fightersNoneSECTION 6: Accidental release measures6.1. Personal precautions, protective equipment and emergency proceduresAvoid breathing dust. Avoid contact with skin, eyes and clothing.6.2. Environmental PrecautionsKeep out of waterways.6.3. Methods and material for containment and cleaning upClean up promptly by scoop or vacuum. If a vacuum cleaner is used, be sure to use a model with dust explosion safety measures. May form explosive mixtures with air.6.4. Reference to other sectionsNoneSECTION 7: Handling and storage7.1. Precautions for safe handlingAvoid breathing dust. Avoid contact with skin, eyes and clothing. Clean contaminated surface thoroughly. Use only with adequate ventilation.7.2. Conditions for safe storage, including any incompatibilitiesKeep in a dry, cool and well-ventilated place. Keep out of the reach of children. Incompatible with oxidizing agents.7.3. Specific end usesToner for electrophotographic machines. Obtain special instructions before use.SECTION 8: Exposure controls/personal protection8.1. Control parametersExposure LimitsChemical name EU OEL Austria Belgium Bulgaria Cyprus Carbon black1333-86-4None None TWA: 3.5 mg/m3None NoneAmorphous silica 7631-86-9None TWA: 4 mg/m3inhalable fractionNone None NoneChemical name Czech Republic Denmark Finland France GermanyCarbon black 1333-86-4TWA: 2.0 mg/m3 dust TWA: 3.5 mg/m3TWA: 3.5 mg/m3STEL: 7 mg/m3TWA: 3.5 mg/m3NoneAmorphous silica 7631-86-9TWA: 4.0 mg/m3amorphous SiO2None TWA: 5 mg/m3None TRGS TWA: 4 mg/m3inhalable fractionDFG TWA: 4 mg/m3inhalable fractionChemical name Greece Hungary Ireland Italy NetherlandsCarbon black 1333-86-4TWA: 3.5 mg/m3STEL: 7 mg/m3None TWA: 3.5 mg/m3STEL: 7 mg/m3None NoneAmorphous silica 7631-86-9None None TWA: 6 mg/m3 totalinhalable dustTWA: 2.4 mg/m3respirable dustSTEL: 18 mg/m3 totalinhalable dustSTEL: 7.2 mg/m3respirable dustNone NoneChemical name Poland Portugal Romania Slovakia SpainCarbon black 1333-86-4TWA: 4.0 mg/m3 totalinhalable dustTWA: 3.5 mg/m3None TWA: 2 mg/m3respirable fraction, 5%or less fibrogeniccomponentTWA: 10 mg/m3respirable fraction,greater than 5%fibrogenic componentTWA: 10 mg/m3 totalaerosolTWA: 3.5 mg/m3Amorphous silica 7631-86-9None None None TWA: 4.0 mg/m3 totalaerosolNoneChemical name Sweden United Kingdom Norway Switzerland TurkeyCarbon black 1333-86-4TLV: 3 mg/m3 totaldustTWA: 3.5 mg/m3STEL: 7 mg/m3TWA: 3.5 mg/m3STEL: 3.5 mg/m3None NoneAmorphous silica 7631-86-9None TWA: 6 mg/m3inhalable dustTWA: 2.4 mg/m3respirable dustTWA: 1.5 mg/m3respirable dustSTEL: 1.5 mg/m3respirable dustTWA: 4 mg/m3inhalable dust, alsomanufactured in wetprocessingNone8.2. Exposure controlsAppropriate engineering controls None under normal use conditions. Individual protection measures, such as personal protective equipment Eye/face Protection Not required under normal use.Respiratory Protection Not required under normal use.Thermal hazardsNot ApplicableSECTION 9: Physical and chemical properties9.1. Information on basic physical and chemical properties Appearance Black ; powder OdorSlight odorOdor threshold No data available pHNot ApplicableEvaporation RateNot ApplicableFlammability (solid, gas)Not flammable; estimatedFlammability Limits in AirUpper Flammability Limit Not Applicable Lower Flammability Limit Not Applicable Vapor pressure Not Applicable Vapor density Not Applicable Relative density 1.0 - 1.2Solubility(ies)Organic solvent; partly soluble Partition coefficient: n-octanol/water Not Applicable Explosive properties May form explosive mixtures with air Oxidizing properties No data available9.2. Other Information No data availableSECTION 10: Stability and reactivity10.1. Reactivity None10.2. Chemical stability Stable10.3. Possibility of Hazardous Reactions None10.4. Conditions to Avoid None10.5. Incompatible materialsAcids, Bases, Oxidizing agents, Reducing agents.10.6. Hazardous Decomposition Products Carbon dioxide (CO 2), Carbon monoxide (CO)Melting/Freezing point (°C)Autoignition Temperature (°C)No data available 80 - 130 (Softening point)Decomposition Temperature (°C)> 200Boiling Point/Range (°C)Viscosity (mPa s)Not ApplicableNot Applicable Flash Point (°C)Not ApplicableSECTION 11: Toxicological information11.1. Information on toxicological effectsAcute toxicity Estimate: LD50 > 2000 mg/kg (Ingestion)Skin corrosion/irritation Estimate: Non-irritantSerious eye damage/eye irritation Estimate: Transient slight conjunctival irritation only.Sensitization Estimate: Non-sensitizingGerm cell mutagenicity Ames Test (S. typhimurium, E. coli): NegativeCarcinogenicity The IARC evaluated carbon black as a Group 2B carcinogen, for which there is inadequatehuman evidence, but sufficient animal evidence. The latter is based upon the developmentof lung tumors in rats receiving chronic inhalation exposure to powdered carbon black atlevels that induce particle overload of the lung.However, there is a two-year inhalation study of a toner containing carbon black whichdemonstrated no association between toner exposure and tumor development in rats. Reproductive Toxicity No data availableSTOT - single exposure No data availableSTOT - repeated exposure Muhle et al. reported pulmonary response upon chronic inhalation exposure in rats to atoner enriched in respirable-sized particles compared to commercial toner. No pulmonarychange was found at 1 mg/m3 which is most relevant to potential human exposure. Aminimal to mild degree of fibrosis was noted in 22% of the animals at 4 mg/m3, and a mildto moderate degree of fibrosis was observed in 92% of the animals at 16 mg/m3.These findings are attributed to "lung overloading", a generic response to excessiveamounts of any dust retained in the lung for a prolonged interval.Aspiration hazard No data availableOther Information No data availableSECTION 12: Ecological information12.1. ToxicityEcotoxicity effectsEstimate: Fish, 96h LC50 > 100 mg/lEstimate: Crustaceans, 48h EC50 > 100 mg/lEstimate: Algae, ErC50(0-72h) > 100 mg/l12.2. Persistence and degradabilityNo data available12.3. Bioaccumulative potentialNo data available12.4. Mobility in soilNo data available12.5. Results of PBT and vPvB assessmentThis preparation contains no substance considered to be persistent, bioaccumulating nor toxic (PBT).This preparation contains no substance considered to be very persistent nor very bioaccumulating (vPvB).12.6. Other adverse effects No data availableSECTION 13: Disposal considerations13.1. Waste treatment methodsDO NOT put toner or a toner container into fire. Heated toner may cause severe burns. DO NOT dispose of a toner container in a plastic crusher. Use a facility with dust explosion prevention measures. Finely dispersed particles form explosive mixtures with air.Dispose of in accordance with local regulations.SECTION 14: Transport informationSECTION 15: Regulatory information15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture (EC) No 1907/2006 Authorisation Not regulated (EC) No 1907/2006 Restriction Not regulated (EC) No 1005/2009Not regulated (EC) No 850/2004Not regulated (EU) No 649/2012Not regulated Other InformationNone15.2. Chemical safety assessment NoneSECTION 16: Other informationKey literature references and sources for data- World Health Organization International Agency for Research on Cancer, IARC Monographs on the Evaluation on the Carcinogenic Risk of Chemicals to Humans- EU Regulation (EC) No 1907/2006, (EC) No 1272/2008, (EC) No 1005/2009, (EC) No 850/2004, (EU) No 649/2012None 14.7. Transport in bulk according to Annex II of MARPOL and the IBC CodeNot Applicable 14.3. Transport Hazard Class 14.1. UN numberNone None 14.4. Packing Group None14.5. Environmental Hazards Not classified as environmentally hazardous under UN Model Regulations and marine pollutant under IMDG Code.14.2. UN Proper Shipping Name 14.6. Special Precautions for usersIATA: Not regulatedKey or legend to abbreviations and acronyms used in the safety data sheet- PBT: Persistent, Bioaccumulative and Toxic- vPvB: very Persistent and very Bioaccumulative- SVHC: Substances of Very High Concern- EU OEL: Occupational exposure limits at Union level under Directive 2004/37/EC and (EU) 2017/2398, 98/24/EC, 91/322/EEC, 2000/39/EC, 2006/15/EC, 2009/161/EU and (EU) 2017/164.- TWA: Time Weighted Average- STEL: Short Term Exposure Limit- IARC: International Agency for Research on Cancer- IATA: International Air Transport Association- CBI: Confidential Business InformationIssuing date :02-Nov-2018Revision date :-Revision Note NoneThis safety data sheet (SDS) is supplied voluntarily.DisclaimerThe information provided on this SDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.。
Trigonox 501-CS40产品数据表说明书
产品数据表Trigonox 501-CS401,2,4,5,7,8-Hexoxonane, 3,6,9-trimethyl-3,6,9-tris(Et and Pr) derivs, 40%solution in odorless mineral spiritsTrigonox® 501-CS40用作引发剂，用于生产受控流变聚丙烯（CR-PP）和LDPE。
CAS 编号1613243-54-1EINECS/ELINCS编号810-295-5TSCA 状态清单上列出的活性氧含量过氧化物17.8规格外观, 20-25 °C透明液体色度50 Pt-Co/APHA max.总活性氧 6.90-7.30 %特性密度, 20 °C0.88 g/cm³应用Trigonox® 501-CS40是挤出工艺生产可控流变聚丙烯(CRPP)时使用的一种有效的过氧化物。
Trigonox® 501-CS40允许聚丙烯生产商在控制聚合物熔融指数方面有很大的灵活性。
通过改变过氧化物的浓度或者工艺温度可有显著地改变其熔融指数。
Trigonox®501-CS40的一个重要优点是在CR-PP终制品中，由过氧化物分解产生的挥发份的含量极低，Trigonox® 501-CS40分解产物中不含有丙酮和叔丁醇。
半衰期数据有机过氧化物的活性通常以其在不同温度下的半衰期(t½)表示。
Trigonox® 501-CS40 在氯苯中的半衰期为：0.1 小时170°C1 小时146°C10 小时125°C公式 1kd = A·e-Ea/RT公式 2t½ = (ln2)/kdEa150.60 kJ/moleA 1.09E+15 s-1R8.3142 J/mole·KT(273.15+°C) K热稳定性有机过氧化物是热不稳定物质，可发生自加速分解。
REACH SVHC 物质清单 (144项) 中英文整理完整版
54 锌黄(C.I.颜料黄 36)
Pentazinc chromate octahydroxide
55 硅酸铝耐火陶瓷纤维
Aluminosilicate Refractory Ceramic Fibres (RCF)
56
氧化锆硅酸铝耐火陶瓷纤 Zirconia Aluminosilicate Refractory
401-750-5 219-514-3 423-400-0 202-027-5 202-959-2 208-953-6
219-943-6
229-851-8
13 *
84
α，α-二[(二甲氨基)苯基]- 4,4'-bis(dimethylamino)-4''-
4-甲氨基苯甲醇
(methylamino)trityl alcohol
18 69 叠氮化铅 19 70 2,4,6-三硝基苯二酚铅
20 71 苦味酸铅
1
72
1,2-二（2-甲氧基乙氧 基）乙烷
2 73 乙二醇二甲醚
1,2-Dichloroethane
Bis(2-methoxyethyl) ether
Arsenic acid Calcium arsenate Trilead diarsenate
43 三氧化铬和
Chromium trioxide
44
铬酸/重铬酸/铬酸及重铬 酸低聚物
Chromic acid Dichromic acid
45 乙二醇乙醚醋酸酯
Ethylene glycol monoethyl ether acetate(CAC), Cellusolve acetate
46 铬酸锶
12 27 铬酸铅(铬黄) 13 28 丙烯酰胺 1 29 三氯乙烯
38049中文资料
3804138049ONE PHASE POWER DISTRIBUTION BLOCKS•Speed of mounting and wiring •IP20 Finger Safe •DIN Rail or Panel Mount •Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm)•Accessories increase the number of outputs with only one input.Part Number:White3804938041Gray (RoHS compliant)DB16DB35ApprovalsCurrent Rating 80A 80A 115A 125A Voltage Rating 600V AC 690V AC 600V AC 690V AC No. of Inputs 1111Wire Range 8-4 AWG 6-16mm 28-2 AWG 10-35mm 2Torque13.5lb. in.1.5Nm 31lb. in.(40 for 3.5Nm No. of Outputs 556DB35)6Wire Range 2x8-4 AWG 2x6-16mm 214-6 AWG 2.5-16mm 2Torque13.5lb. in. 1.5Nm 17.5lb. in.2NmWire Range 3x14-10 AWG 3x2.5-6mm 2Torque 7.2lb. in.0.8NmOptional Marking TagMT2MT2(for DB16ad DB35)Dimensions:Accessories Part Number:Fork Type Busbar 38045to jump 2 Blocks 38046to jump 8 Blocks can be cut to customer needsCopper Jumper Bar 3803221Fork Type Busbar 38045380413803223Altech Corp.®•35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • 380323802038019Part Number:ApprovalsCurrent RatingVoltage RatingNo. of InputsWire RangeTorqueNo. of OutputsWire RangeTorqueWire RangeTorqueWire RangeTorqueDimensions:AccessoriesPart Number:3802038019230A250A310A400A600V AC690V AC600V AC690V AC11112-4/0AWG35-120mm23/0-350kcmil95-185mm2170lb. in.19Nm230lb. in.25Nm111111112x 14-2AWG 2.5-35mm22x 14-2AWG 2.5-35mm231lb. in. 3.5Nm31lb. in. 3.5Nm5x 14-6AWG 2.5-16mm25x 14-6AWG 2.5-16mm217.5lb. in.2Nm17.5lb. in.2Nm4x 14-8AWG 2.5-10mm24x14-8AWG 2.5-10mm217.5lb. in.2Nm17.5lb. in.2Nm38032160A160A600V AC690V AC118-2/0AWG10-70mm235.5lb. in.4Nm6614-6 AWG 2.5-16mm217.5lb. in.2NmCopper Jumper Bar3803221for 2 Blocks3803231for 3 Blocks3803241for 4 Blockscan be cut to customer needsAltech Corp.®•35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • 243807538073Part Number: Approvals Current Rating Voltage Rating No. of InputsWire RangeTorque No. of Outputs Wire RangeTorque Dimensions:3807538073115A115A175A175A 600V AC690V AC600V AC690V AC 3x13x13x13x18-2AWG10-35mm28-2/0AWG10-70mm2 31lb. in. 3.5Nm35.5lb. in.4Nm 3x63x63x63x614-4AWG 2.5-16mm214-4AWG 2.5-16mm2 17.5lb. in.2Nm17.5 lb. in.2Nm3PoleTHREE PHASE POWER•Speed of mountingand wiring•IP20 Finger Safe•DIN Rail or Panel Mount•Blocks fit with other DIN Railmountable modular devices•Same compact size forboth ratings25 Altech Corp.®•35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • 。
中德材料牌号对照表2
do not use
S275JRC
1. 0128
Q St 44-2
DIN EN 10025 (invalid)
Q 275
GB 700-88
Unalloyed engineering steels
do not use
S355J0
1. 0553
-
DIN EN 10025 (invalid)
16Mn
GB 1591-88
GB 1591-88
High strength low alloy structural steels
similar
Fine-grained engineering steels, weldable
Q 235 C
GB 700-88
Unalloyed engineering steels
similar
S235J2G3
1. 0116
St 37-3N
DIN EN 10025 (invalid)
Q 235 D
GB 700-88
Unalloyed engineering steels
similar
S235J2G3C
Q 345 D Q 345 C
GB T 1591-94 GB T 1591-94
High strength low alloy structural steels High strength low alloy structural steels
similar identical
S235J0
1. 0114
do not use
do not use
do not use
Materials german-chinese-2006-01-01_INTRANET.xls
超越号950胶水盐过液安全数据表说明书
SAFETY DATA SHEETSUPERIOR No. 950DATE REVISED: January 3, 2019SECTION 1 -- IDENTIFICATIONProduct Name/Part number: Superior No. 950Recommended use: Rosin Flux PasteManufacturer:Superior Flux & Mfg. Co. Emergency Contact: CHEMTREC 6615 Parkland Blvd Emergency Phone: 1-800-424-9300Cleveland OH, 44139For other info: (440) 349-3000 SECTION 2 – HAZARD(S) IDENTIFICATIONClassification of the substance or mixtureGHS Classification in accordance with OSHA HCS (29 CFR 1910)Acute toxicity, Oral (Category 4) H302Skin irritation (Category 2) H315Skin sensitization (Category 1) H317Serious eye damage (Category 1) H318Specific target organ toxicity – Single exposure, Respiratory system(Category 3) H335Specific target organ toxicity – Repeated exposure, Inhalation, Lungs(Category 1) H372Specific target organ toxicity – Repeated exposure, Oral, Kidney(Category 2) H373Acute aquatic toxicity (Category 3) H402See below for full text of H-StatementGHS Label Elements, including precautionary statementsPictogram(s):Signal Word: DangerHazard Statement(s)**H302 Harmful if swallowedH315 Causes skin irritationH317 May cause an allergic skin reactionH318 Causes serious eye damageH335 May cause damage to respiratory systemH372 Causes damage to lungs through prolonged or repeated exposure if inhaled.H373 May cause damage to kidney through prolonged or repeated exposure if swallowed.H402 Harmful to aquatic life.**May be omitted from label due to presence of stronger/stricter statement.Precautionary statement(s)P260 Do not breathe dust, fumes, mist, vapours, or spray.P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P271 Use only outdoors or in a well-ventilated area.P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves and eye protection.P301+P312+P330 IF SWALLOWED: Call a POISON CENTER or doctor if you feel unwell.Rinse mouth.P302+P352 IF ON SKIN: Wash with plenty of soap and water.P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a positioncomfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Removecontact lenses, if present and easy to do. Continue rinsing.P312 Call a POISON CENTER or doctor if you feel unwell.P332+P313 If skin irritation occurs: Get medical advice.P337+P313 If eye irritation persists: Get medical attention.P362 Take off contaminated clothing and wash before reuse.P403+P233 Store in a well-ventilated place. Keep container tightly closed.P405 Store locked up.P501 Dispose of contents to an approved waste disposal plantHazards not otherwise classified or not covered by GHS: NoneSECTION 3 – COMPOSITION INFORMATIONComponents CAS Number %Rosin 8050-09-7 20-50Benzoic acid 65-85-0 5-10 Dimethylamine hydrochloride 506-59-2 <5Ethylene glycol 107-21-1 <5Unlisted percentages are non-hazardous stabilizers, and water.SECTION 4 – FIRST AID MEASURESDescription of first aid measuresGeneral advice: Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.Inhalation: If breathed in, move to fresh air. If not breathing, give artificial respiration.Consult a physician.Eyes:Rinse thoroughly with plenty of water for at least 15 minutes.Skin:Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.Ingestion:Rinse mouth with water. Never give anything by mouth to an unconscious person.Rinse mouth with water. Consult a physician immediately.Most Important Symptoms and effects, both acute and delayedThe most important known symptoms and effects are described in section 2 (labeling)Medical Conditions Generally Aggravated by Exposure: Any weakness of the lungs, kidneys or liver will be aggravated.SECTION 5 – FIREFIGHTING MEASURESSuitable Extinguishing Media: Use dry chemical, carbon dioxide foamSpecial Hazards: No data availableSpecial protective actions for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.SECTION 6 - ACCIDENTAL RELEASE MEASURESPersonal Precautions and Equipment and emergency procedures: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. See section 8 for personalprotection.Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.In Case Material is spilled:Contain spillage, then collect by wet-brushing and place in container for disposal according to local regulations.SECTION 7 - HANDLING AND STORAGEPrecautions for safe handling: Avoid contact with skin and eyes. Provide adequate and appropriate ventilation for fumes when using this product.General Precautions: Do not eat, drink, or smoke while using this product. Wash hands after use. Remove contaminated clothing and protective equipment before entering eating areas.For full precaution statements see Section 2Storage Requirements: Keep container tightly closed in a dry and well-ventilated place.Containers which are opened must be carefully resealed and kept upright to preventleakage.SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION CONTROL PARAMETERSOSHA Permissible Exposure Limit (PEL): 1 mg/m3ACGIH Threshold Limit Value (TLV): 1 mg/m3Engineering Controls: Use local exhaust ventilation to maintain air concentrations of vapors and fumes below occupational exposure standards.Special Engineering Control Needs: No data availableRespiratory Protection: For nuisance exposures use type P95 (US) respirator. For higher level protection use type OV/AG/P99 respirator cartridges as a backup to engineering controls.If the respirator is the sole means of protection, use a full-face respirator. Use respirators and components tested an approved under appropriate government standards such asNIOSH (USA) or CEN (EU).Protective Gloves: Handle with gloves. (Nitrile Rubber recommended) Gloves must be inspected prior to use. Use proper glove removal techniques (without touching glove’souter surface) to avoid skin contact with this product. Dispose of contaminated glovesafter use in accordance with applicable laws and good lab practices. Wash and dry hands after handling.Eye Protection: Use tightly fitting safety goggles. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (USA) or EN 166(EU)Body Protection: Complete suit protecting against chemical, flame retardant protective clothing recommended. The type of protective equipment must be selected according to theconcentration and amount of the dangerous substance at the specific workplaceIf used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.SECTION 9 - PHYSICAL AND CHEMICAL CHARACTERISTICS Appearance Amber pasteOdor MildOdor threshold No data availablepH Not applicableMelting point/Freezing point 49°C/120°FInitial boiling point and boiling range No data availableFlash point No data availableEvaporation rate Not applicableFlammability (Solid, gas) No data availableUpper flammability or explosive limits Upper explosion limit: No data available Lower flammability or explosive limits Lower explosion limit: No data available Vapor pressure No data availableVapor density No data availableRelative density 1.20 (Water = 1)Solubility(ies) MinimalPartition coefficient: n-octanol/water No data availableAuto-ignition temperature No data availableDecomposition temperature No data availableViscosity No data availableSECTION 10 - STABILITY AND REACTIVITYReactivity: No data availableStability: Product is stable under recommended storage conditionsPossibility of hazardous reactions: No data availableConditions to Avoid: Excessive heatIncompatibility: No data availableHazardous Decomposition Products Hydrogen chloride gas, carbon monoxide, carbon dioxide (Under fire conditions)In the event of fire: See Section 5SECTION 11 - TOXICOLOGICAL INFORMATIONLikely Route(s) of Exposure: Inhalation, ingestion, skin and eye contactSymptoms (Immediate and Chronic) fromAcute Exposure No data availableProlonged or Repeated Exposure No data availableMeasure(s) of toxicityNo data availableIARC:No component of this product is present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. NTP:No component of this product is present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.OSHA:No component of this product is present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHASECTION 12 - ECOLOGICAL INFORMATIONToxicityNo data availablePersistence and degradabilityNo data availableBioaccumulative potential No data availableMobility in soil No data availableOther adverse effectsNo data availableSECTION 13 - DISPOSAL CONSIDERATIONSWaste treatment methodsProduct Offer surplus and non-recyclable solutions to a licensed disposal company.Contact a licensed professional waste disposal service to dispose of this material. Contaminated packaging Dispose of as unused product.SECTION 14- TRANSPORTATIOND.O.T. (USA)Proper Shipping Name: Non-hazardousIdentification Number: N/A Hazard Class(es): N/APacking Group: N/A Reportable Quantity (RQ): N/ASpecial Precautions to Note:Environmental HazardsN/A Marine Pollutant? N/ASECTION 15 - REGULATORY INFORMATIONSARA 302 Components No Chemicals in this material are subject to the reportingrequirement of SARA Title III, Section 302.SARA 313 Components The following components are subject to reporting levelsestablished by SARA Title III, Section 313CAS No. Revision Date:Rosin 8050-09-7 03/01/2007SARA 311/312 Hazards Skin sensitizationCalifornia Prop. 65 ComponentsThis product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.T HIS PRODUCT IS R O HS3 COMPLIANTSECTION 16 - OTHER INFORMATIONFurther information:Judgments as to the suitability of information herein or the purchaser's purposes are necessarily the purchaser's responsibility. The above information does not represent any guarantee of the properties of the product. It is believed to be correct, but does not purport to be all inclusive and should be used only as a guide. Reasonable care has been taken in the preparation of this material, and is based on the present state of our knowledge.Superior Flux & Mfg. Co. shall not be held liable for any damage resulting from handling or from contact with the above product. There are NO WARRANTIES, NO REPRESENTATIONS AND NO RESPONSIBILITY AS TO THE ACCURACY OR THE SUITABILITY OF THIS INFORMATION FOR ANY PURCHASER'S USE OR FOR ANY CONSEQUENCE TO USE.Preparation informationSuperior Flux & Mfg. Co.440-349-3000。
Technical Manual for Power Supply PP-3495 UG说明书
*(Non-Registered) NAVSHIPS 94503TECHNICAL MANUALforPOWER SUPPLYPP-3495/UGFUTURONICS CORPORATIONPORT WASHINGTON, NEW YORKDEPARTMENT OF THE NAVYBUREAU OF SHIPSContract NObsr 87318 Approved by BuShips: 15 August 1962Effective Pages NAVSHIPS 94503 FRONT MATTERLIST OF EFFECTIVE PAGESPAGE CHANGE IN PAGE CHANGE INNUMBERS EFFECT NUMBERS EFFECTORIGINALFRONT MATTER Promulgating LetterNAVSHIPS 94503DEPARTMENT OF THE NAVYBUREAU OF SHIPSWASHINGTON 211, D. C. IN REPLY REFER TOCode 242-100From: To: • Subj: Chief, Bureau of ShipsAll Activities concerned with the Installation, Operation, and Maintenance of the Subject EquipmentTechnical Manual for Power Supply PP-3495/UG, NAVSHIPS 945031. This is the Technical Manual for the subject equipment and isin effect upon receipt.2. When superseded by a later edition, this publication shall be destroyed.3. Extracts !'rom this publication may be made to facilitate the preparation of other Department of Defense publications.4. Errors found in this publication (other than obvious typographical errors), which have not been corrected by means of Temporary Corrections or Pe rman ent Changes should be reported. Such reports should include the complete title of the publication and the publication number (short title); identify the page and line or figureand location of the error; and be fo rwar ded to the PublicationsSection of the Bureau of Ships.5. All Navy requests for Bureau of Ships electronic publications should be directed to the Naval Supply Depot, 5801 Tabor Avenue, Philadephia, Pennsylvania.ORIGINAL R. K. JAMESChief of BUREAUiiiCorrection PageCHANGE NO.-ivNAVSHIPS 94503RECORD OF CORRECTIONS MADEDATE FIELD CHANGE NO.FRONT MATTERSIG NATUREORIGINAL.FRONT MATTER NAVSHIPS 94503TABLE OF CONTENTSSECTION 1 -GENERAL INFORMATIONParagraph1-1. Functional Description1-2. Reference Data ....SECTION 2 -INSTALLATION2-1. Site Selection . . . . . . .2-2. Power Requirem ents ...2-3. Terminal Board Connections ...2-4. Voltage Adjustment ...SECTION 3 -OPERATION3-1. Operating Procedures . . . . . . . . . . . . . . . . . . . . . .SECTION 4 -PRINCIPLES OF OPERATION4-1. Functional Description .....SECTION 5-TROUBLESHOOTING5-1. General 0 SECTION 6 -REP A IR6-1. 6-2. 6-3. Failure Report Adjustments . Repair .SECTION 7 -PARTS LIST7-1. Introduction .......7-2. Maintenance Parts List .7-3. List of Manufacturers.LIST OF ILLUSTRATIONSSECTION 1 -GENERAL INFORMATION Figure1-1. Power Supply PP-3495/UG .......... 1-2. Power Supply PP-3495/UG, System Diagram ORIGINAL ContentsPage1-21-22-02-02-02-03-04-15-06-16-16-17-17-17-1Page1-11-2vConte nts NAVSHIPS 94503 LIST OF ILLUSTRATIONS (Cont'd)SECTION 2 -INSTALLATIONFigure2-1. Power Supply PP-3495/UG, Outline Drawing 2-2. Terminal Board Connections 48-Volt Output . 2-3. Terminal Board Connections 120-Volt OutputSECTION 3 -OPERATION FRONT MATTERPage2-02-12-13-1. Power Supply PP-3495/UG, Front View ..............3-0 SECTION 6 -REPAIR6-1. 6-2. 6-3. Power Supply PP-3495/UG, Top View ...... Power Supply PP-3495/ U G, Schematic Diagram. Power Supply PP-3495/UG, Wiring Diagram ..LIST OF TABLESSECTION 7 -PARTS LIST Table7-1. Maintenance Parts List .SECTION 7 -PARTS LIST 7-2. List of Manufacturers ..Vl6-26-36-4Page7-27-3 ORIGINALPP-3495/UGGENERAL INFORMATION NAVSHIPS 94503Figure 1-1. Power Supply, PP-3495/UG ORIGINAL Figure1-11-1Paragraph 1-1NAVSHIPS 94503PP-3495/UGGENERAL INFORMATIONSECTION IGENERAL INFO R MATION 1-l.FUNCTIONAL DESCRIPTION.Power Supply PP-3495/UG is a unit designed to produce either 120 or 48 volts d. c. when operated from a 120-volt a. c . 50-or 60-cycle supply.Thed. c. voltage output is regulated and will remain constant within plus or minus So/o with an a. c. voltage input change of plus or minus lOo/o at a load of l. 0 ampere.Power Supply PP-3495 /UG is intended to be used as a d. c. supply for the operation of teletypewriters, radio adapters, and associated equipments.Figure 1-2 shows Power Supply PP-3495/UG used in a typical radio teletype system.No vacuum tubes are used and the unit requires no operation adjustments.The circuit comprises a powertransformer, a silicon bridge rectifier , an inductance-capacitance filter, and a d. c. voltage regulator consisting of a magnetic amplifier and Zener diodes. Fuses are provided for overload and short circuit protection and a pilot light indicates when the power is on. l-2.REFER ENCE DATA.a.Navy Type: Power Supply PP-3495/UGCommercial Type:PowerSupply DE 1034b.Contract:NObsr-87318c.Contractor:FuturonicsCorporation, Port Washington, N.Y.CONVERT ERCOMPARA TOR GR OUP• • • • 0•RECEIVERRECEIVEROUT PUT POWER120VOR48VDC±5%INPUT 120V±IO%,D50 OR 60 CYCL ESO OOO'fPOWER SUPPLY••T TYFigure 1-2.Power Supply PP-3495/UG , System DiagramPANELl -2ORIGINALPP-3495/UG NAVSHIPS 94503 Paragraphl-2 GE NERAL INFORMATION�· Inspector: Inspector of Naval Material, Garden City, N.Y.�· Number of Packages: One complete unit per packagef. Cubical Contents: 855 cubic inches uncratedORIGINALg_. Total Weight: 38 poundsh. Power Supply: 120 volts, plus or minus l O o/o, 50 or 60 cycles, plusor minus 5o/o, single phasei. Output Voltage: 120 or 48 volts d. c.� plus or minus 5o/o at l. 0 ampere1-3Paragr aph 2-1NAVSHIPS 94503 PP-3495/UG INSTALL ATIONSECTION 2 INSTALLATION 2-1.SITE SE LECTION.Power Supply PP-3495 /UG may be located on any shelf, table, deck, or other horizontal surface.Sufficientclearance should be provided from other equipment and structures to allow adequate ventilation.Figure 2-1, Power Supply PP-3495 / UG Outline Dr awing, indicates the over-all dimensions. Six 1/4-20 boltsare required to fasten the unit to itsfoundation. 2-2.POWER REQUIREMENTS.Power Supply PP-3495/UG operates from a 120-volt, 50-or 60-cycle, single phase supply.��A removable plate is provided on the rear of the cabinet for access to the cable terminations and voltage adjustment control R5.Cable entrancearea for stuffing tube is indicated onenclosure as shown in figure 2-1. 2-3.TERMINAL BOARD CONNECTIONS.Terminal board connections for output voltages of 48 volts and 120 volts are shown in figures 2-2 and 2-3. 2-4.VOLT A GE ADJUSTMENT.After connecting as shown in figures 2-2 or 2-3 for the desired voltage, fine adjustment of voltage is obtained by means of control R5.To adjust R5,loosen locking nut, turn shaft with screwdriver for desired setting and retighten locking nut.T �c=JLOUVERS9f� c:::00SESb(j� 0PANELSWITCH10"FRONT VIEWSIDE VIEWREAR VIEWFigure 2-1. Power Supply PP3495/UG, Outline Drawing2-0ORIGINAL•,PP-3495/UGINSTALLATIONNAVSHIPS 94503Figure 2-2. Terminal Board C onnection 48-Volt OutputIF MAXIMUM VOLTAGEOBTAINABLE WITHJUMPERS GONNECTEDAS SHOWN IN FIG AIS LESS THAN 120 V,CONNECT JUMPERSAS SHOWN IN FIG B.Figure 2-3. Terminal Board Connections 120-Volt OutputFigures 2-2, 2-3ORIGINAL 2-1Paragr aph 3-l NAVSHIPS 94503 PP-3495/UGOPERATIONSECTION 3OPERATION3-l. OPER ATING PR OCEDURES.With Power Supply PP-3495/UG properly wired to the a. c. source andits d. c. load, and set for desired output voltage as per paragraph 2-4, itis energized by placing the a. c. power line switch in the ON position. T he power light DS l should come on,F3 F2 Fl indicating that a. c. power is availableto the Power Supply.Figure 3-1, Power Supply PP-3495 /UG, Front View, shows the location of the power line, switch, power light and fuses.Power Supply PP-3495/UG may be closed down by placing the a. c. power line switch S l to the OFF position. No other operation or special precautions are ne c e s s a r y.51Figure 3-1. Power Supply PP-3495/UG, Front View3-0ORIGINALPP-3495 /UG NAVSHIPS 94503 Paragraph4-1 PRINCIPLES OF OPERATIONSECTION 4PRINCIPLES OF OPERATION4-1. FUNCTIONAL DESCRIPTION.Power Supply PP-3495 /UG (seefigure 6-2) operates from a 120-volt,50-or 60-cycle, single phase, a. c. source. TermiU:al board TB 1m ay be connected for an output voltage of 48 volts (see figure 2-2) or 120 volts(see figure 2-3).When switch S 1is in the ON position, input power is applied through radio frequency interference filter Z2, lighting POWER indicator DS 1. The negative half-cycle of the input voltage is pas s ed through diode CR 7and an input winding of the magnetic amplifierto the primary of Transformer T l. The positive half-cycle is passed by diode CR8 and the other input winding of the magnetic amplifier to the primary of transformer T 1. The magnetic amplifier provides voltage regulations asde scribed below.The voltage across the primary of transformer T 1is induced across the secondary which provides outputs of approximately 48 volts and 120 voltson pins 6 and 7, respectively. The voltage is stepped-down across the center-tapped secondary which provides two 9 -volt outputs. The centertapped secondary is a voltage supplyORIGINAL used to compensate for variationscaused by the 5o/o tolerance of the Zener diodes, CR l and CR2. The selected voltage (either 48 volts or 120 volts)is full-wave rectified by bridge rectifier CR3, CR4, CR5, and CR6. Fora 48-volt output, the rectified voltageis filtered by inductor L 1and capacitor C 1; resistor R4 is a bleeder. For a120-volt output, the rectified voltageis filtered by inductor L l and capacitors C2A and C2B; resistor R3 is a bleeder.Voltage regulation of plus or minus5o/o is achieved by varying the degreeof saturation of the magnetic amplifierto compensate for load and line variations. The bias winding of the magnetic amplifier (in series with resistor R2) biases the magnetic amplifier partially into saturation. The bias winding is energized through resistor R2. The control winding of the magnetic amplifier (in series with fuse F3) senses voltage variations in the output andvaries the voltage drop across the magnetic amplifier, thereby adjusting the voltage across the primary of transformer T l. The control windingis voltage referenced by voltage reference diodes CR 1and CR2 in serieswith potentiometer R5. Potentiomete�R5 is adjusted until the desired output voltage is reached. Fuse F3 provides protection against short circuiting ofthe Zener diodes.4-1Paragr aph 5-1 NAVSH IPS 94503 PP-3495/UGTROUBLESHOOTINGSECTION 5TROUBLESHOOTING5-l. GENERAL.NOTEThe Bureau of Ships nolonger requires the submission of failure reports for all equipments.Failure Reports and Performance and OperationalReports are to be accomplished for designatedequipments to the extentre quired by existing directive s. All failuresshall b e reported forthose equipments requiring Failure Reports.If d. c. output voltage is absent make the following checks:Observe power indicatinglight D S l for the presence of input power.b. Check blown fuse indicators for XF 1 and XF2. The neon lights in the knob sections of these fuseholders 5-0 will glow to indicate a blown fuse. Spare fuses will be found in clip holders inside the bottom cover.�· Check the a. c. voltage at the input to the silicon bridge rectifier. This should read approximately 48 or 120 volts. If an abnormally iow voltage is indicated, an open condition may exist in transformer T 1, in magnetic amplifier Z 1, or in rectifiers CR7 or CR8.Check the d. c. voltage across the filter capacitors. This should read approximately 48 or 120 volts.If no d. c. voltage is indicated, check capacitors C 1, C2A and C2B where app.ticable for a possible shorted condition. Defective silicon rectifiers CR3, CR4, CR5, and CR6 will also cause the d. c. voltage to be low or absent.e. Excessive variations in thed. c. output voltage may be caused by defective Zener diodes CR 1 and CR2, magnetic amplifier Z 1, diodes CR 9 and CR lO, or resistors R l, R2, andR5. Check indicating fuseholder F3.It indicates fuse has blown, diodesCR 1 or CR2 may be shorted.ORIGINALPP-3495/UGREPAIRSECTION 6REPAIR6-1. FAILURE REPORT.NOTEThe Bureau of Ships nolonger requires the submission of failure reports for all equipments.Failure Reports and Performance and OperationalReports are to be accomplished for designatedequipments to the extentrequired by existing directives. All failuresshall be reported forthose equipments requiring Failure Reports. ORIGINAL NAVSHIPS 94503 Paragraph6-1 6-2. ADJUSTMENTS.Except for resistor R5 described in section 2-4, Power Supply PP-3495/UGdoes not require any operational adjustments.6-3. REPA IRFigure 6-1 indicates the parts location in Power Supply.Before any part is tested for a .suspected defect, it should be disconnected from the circuit.Circuit continuity and test pointsmay be readily determined from figure 6-2, schematic diagram; and figure 6-3, wiring diagram.6-1Figure 6-16-2NAVSHIPS 94503Figure 6-1. Power Supply PP-3495/UG, Top ViewPP-3495/UGREPAIRORIGINALP P-3495/UG PARTS LIST NAVSHIPS 94503 Paragr aph7-1SECTION 7PARTS LIST7-1. INTRODUCTION..§!:.· Refe r enee designations, previously referred to as circuit symbols, have been assigned to identify all maintenance parts of the equipment. They are used for marking the equipment, adjacent to the part they identify, and are included on drawings, diagrams, and the parts list.b. Stock number of parts usedin this equipment may be obtained by referring to the Stock Number Identification Table (SNIT) published byE.S.O.ORIGINAL 7-2. MAINTENANCE PARTS LIST.Table 7-1 lists the maintenance parts for Power Supply PP-3495 /UG.Column 1 lists the reference designation of the various parts in alphanumerical sequence.Column 2 lists the name and description of the various items.Column 3 lists the locating function of the part in the equipment.7-3. LIST OF MANUFACTUR ERS.Table 7-2 lists manufacturers of parts used in the equipment. Column 1 indicates the abreviations used to identify the Manufacturers.7-1Table7-lReference DesignationCRlCR2CR3CR4CR5CR6CR7CR8CR9CRlOClC2DSlLlRlR2R3R47-2NAVSHIPS 94503Table 7-l. Maint enance Parts Lis tSEMI CONDUCTOR DE VICE, DIODE, 43V lOW,Zener, MIL type lN2993BSEMI CONDU CTOR DEVIC E, DIODE, 75V lOW,Zener, MIL type lN3002BCRYSTAL UNIT, RECTIFIER; JAN lN540CRYSTAL UNIT, RECTIFIER; JAN lN540CRYSTAL UNIT, RECTIFIER; JAN lN540CRYSTAL UNIT, RECTIFIER; JAN lN540CRYSTAL UNIT, RECTIFIER; MIL typeIN l l24ACRYSTAL UNIT, RECTIFIER; MIL type1Nll24ACRYSTAL UNIT, RECTIFIER; JAN lN538CRYSTAL UNIT, RECTIFIER; JAN lN538CAPACITOR, FIXED, ELECTROLYTIC;500 mfd, 50 vdc, MIL type CE51C501GCAPA CITOR, FIXED, ELECTROLYTIC;160-160 mfd, 150 vdc, MIL type CE52Cl6lJLAMP, NEON: General E lectr ic Co.Part No. NE-51FUSE; 4 amp, MIL type F02A250V -4AFUSE; 4 amp, MIL type F02A250V -4AFUSE; l/8 amp, MIL type F02A250V-l/8AREACTOR; P /N DE 1028, Type TF4RX04J BMIL-T-27ARESISTOR, FIXED, WIRE WOUND: 1800 ohms.±_ 5o/o MIL type R W2 9RESISTOR, FIXED, WIRE WOUND: 820 ohms+5o/o, MIL type RW29RESISTOR, FIXED, WIRE WOUND: 2000 ohms+ So/o, MIL type R W2 9RESISTOR, FIXED, WIRE WOUND: 510 ohms±_5o/o, MIL type R W29PP-3495/U GPARTS LISTLoca tingFunctionFigure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3Figure 6-3ORIGINALPP-3495/UGPARTS LI ST NAVS H IPS 94503 Table 7-1 (continu ed}Table 7-1Reference Lo ca tin gDesig na tion R5 S l TB l TB2 Tl XDSl XF l ) .XF2 XF3 Z l Z2 -RESI STOR, VARI ABLE; 50 ohms, + 10% MIL type RA20SWITCH , TOGGLE: MS 35059-22 TERMINA L BO ARD: MIL type 8TB6 TERMINAL BO ARD: MIL type 42TB5 TRANSFORMER, PO WER: P/N DE1030 type TF4RX02JA, MIL-T-27ALIGH T, INDI CA TOR: MIL type LH 76LC14RD FUSEHOLDER: MIL type FHL 1 7G FUSEHOLDER: MIL type FHL 17G FUSEHOLDER: MIL type FHL 18G A MP LI FI ER, MAGNETIC: P/N DE1027 type TF4RX41MA, MIL -T-27AFILTER, RADIO INTERFERENCE : Filt ron Co. , Inc. Part No. DE 1032Table 7-2. List of Manufa cturersNam e Address Function Figure 6-3Figure 6-3 Figure 6-3 Figure 6-3 Figure 6-3Figure 6-3 Figure 6-3 Figure 6-3 Figure 6-3 Figure 6-3Figure 6-3Filtron Company, Inc. 131-15 Fowler Ave., Flushing , N.Y.General Ele ctri c Company ORIG INAL Mini ture Lamp Div., Nela Park,Clevelan d, O hi o7-3。
瀚洲化工 水溶性聚对苯二甲酸乙二醇酯 说明书
安全技术说明书瀚洲化工安全技术说明书日期/修订:06.05.2019版本:4.1产品:水溶性聚对苯二甲酸乙二醇酯Petra®130FRProduct:PETRA130FR(30215362/SDS_GEN_CN/ZH)印刷日期16.05.20191.物质/制剂及公司信息水溶性聚对苯二甲酸乙二醇酯Petra®130FRPETRA130FR公司:四川瀚洲化工科技有限公司中国四川Sichuan Hanzhou Chemical Technology Co.,Ltd.眉山市经济开发区东区邮政编码620010East Economic Development Zone,Meishan City,电话:+862838603881SichuanProvince Post Code:620010传真号:+862838603686Tel:+86-28-38603881E-mail地址:**************Fax:+86-28-38603686E-mail address:**************2.危险性识别纯物质和混合物的分类:根据GHS标准，该产品不需要进行分类。
标签要素和警示性说明:根据GHS标准，该产品不需要添加危险警示瀚洲化工安全技术说明书日期/修订:06.05.2019版本:4.1产品:水溶性聚对苯二甲酸乙二醇酯Petra®130FRProduct:PETRA130FR(30215362/SDS_GEN_CN/ZH)印刷日期20.05.2019 3.成分/组分信息化学性质:混合物化合物制备基于：填料,添加剂4消防措施适宜的灭火介质:水喷雾,干粉末,二氧化碳,泡沫特殊危害:无已知特殊危害。
环境污染预防:无需特殊防护措施。
清理或收集方法:如果可能,收回过程.扫除/铲除遵循国家、州及当地的法规处理。
5操作处置与储存操作处置防火防爆:容器应接地以防静电。
储存适于作容器的材料:低密度聚乙烯关于存储条件的详细信息:保持容器密封。
AO4459中文资料
AO4459中⽂资料SymbolTyp Max 33406275R θJL 1824Maximum Junction-to-Lead CSteady-State°C/WThermal Characteristics ParameterUnits Maximum Junction-to-AmbientAt ≤ 10s R θJA °C/W Maximum Junction-to-Ambient ASteady-State °C/W AO4459AO4459SymbolMin TypMaxUnits BV DSS -30V -1T J =55°C-5I GSS ±100nA V GS(th)-1.5-1.85-2.5V I D(ON)-30A 3846T J =125°C53685872m ?g FS 11S V SD -0.78-1V I S-3.5A C iss 668830pF C oss 126pF C rss 92pF R g69?Q g (10V)12.716nC Q g (4.5V) 6.4nC Q gs 2nC Q gd 4nC t D(on)7.7ns t r 6.8ns t D(off)20ns t f 10ns t rr 2230ns Q rr15nCTHIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE.DYNAMIC PARAMETERS Maximum Body-Diode Continuous CurrentGate resistanceV GS =0V, V DS =0V, f=1MHzV GS =0V, V DS =-15V, f=1MHz Input Capacitance Output Capacitance Turn-On Rise Time Turn-Off DelayTime V GS =-10V, V DS =-15V, R L =2.5?, R GEN =3?Turn-Off Fall TimeTurn-On DelayTime SWITCHING PARAMETERSTotal Gate Charge (4.5V)Gate Source Charge Gate Drain Charge Total Gate Charge (10V)V GS =-10V, V DS =-15V, I D =-6.5Am ?V GS =-4.5V, I D =-5AI S =-1A,V GS =0V V DS =-5V, I D =-6.5AR DS(ON)Static Drain-Source On-ResistanceForward TransconductanceDiode Forward VoltageI DSS µA Gate Threshold Voltage V DS =V GS I D =-250µA V DS =-24V, V GS =0VV DS =0V, V GS =±20V Zero Gate Voltage Drain Current Gate-Body leakage current Electrical Characteristics (T J =25°C unless otherwise noted)STATIC PARAMETERS ParameterConditions Body Diode Reverse Recovery Time Body Diode Reverse Recovery ChargeI F =-6.5A, dI/dt=100A/µsDrain-Source Breakdown Voltage On state drain currentI D =-250µA, V GS =0V V GS =-10V, V DS =-5V V GS =-10V, I D =-6.5AReverse Transfer Capacitance I F =-6.5A, dI/dt=100A/µs A: The value of R θJA is measured with the device mounted on 1in 2FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The value in any a given application depends on the user's specific board design. The current rating is based on the t ≤ 10s thermal resistance rating.B: Repetitive rating, pulse width limited by junction temperature.C. The R θJA is the sum of the thermal impedence from junction to lead R θJL and lead to ambient.D. The static characteristics in Figures 1 to 6 are obtained using < 300µs pulses, duty cycle 0.5% max.E. These tests are performed with the device mounted on 1 in 2FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The SOA curve provides a single pulse rating. Rev0 Sept 2006AO4459AO4459。
朔德335845自然吸气4.25英寸6气匠柴油引擎筛选说明书
APPLICATION: Combines: 6600 After 156500; 6602 After 1500; 7700 After 8000;Tractors: 4230, 4040;QTY ITEM # DESCRIPTION LETTERED ITEMSINCLUDED IN KIT1 951418 Underhaul Kit U1 954422 In-Frame Kit I1 955422 Out-of-Frame Kit O1 956422 Major Kit M 1 956423 Major Kit (Hi-Comp / Hypereutectic Pistons) M6 6 6 6 6 1 1 151526 151524 151527 151519 151115 151486 151521 Sleeve & Piston Assembly Sleeve & Piston Asb (Hi-Comp / Hypereutectic Pistons) Piston Assembly (Late Hi-Ring Design)Liner AssemblyLiner O-Ring Package.002 Liner ShimBlock Repair Insert, Lower Liner Pilot Bore (2 Grooves)MM O I6 151528 Piston Ring Set (1-1/8K 1-3/32 1-3/16)6 6 6 6 6 251167 251168 251169 251171 251172 STD Rod Bearing .002 Rod Bearing.010 Rod Bearing.020 Rod Bearing.030 Rod BearingM M O I U1 1 1 1 1 251222 251223 251224 251225 251226 STD Main Bearing Set w/Thrust Washers .002 Main Bearing Set w/Thrust Washers.010 Main Bearing Set w/Thrust Washers.020 Main Bearing Set w/Thrust Washers.030 Main Bearing Set w/Thrust WashersM M O I U1 1 251521 251522 STD Thrust Washer Set .007 Thrust Washer Set1 1 1 6 12 351537 351345 351527 351161 301114 Head Gasket Set (1) Valve Cover Gasket (2)Manifold Gasket SetIntake Valve Seal (Viton O-Ring)Positive Valve Seal, Optional (Not in Gasket Sets) (3)I1 1 1 1 1 351538 351539 351312 351348 351569 Overhaul Gasket Set wo/Seals Block Gasket Set (4)Pan Gasket Set: Tractors (Incls 4 Gaskets & 5 O-Rings) (5) Pan Gasket: CombinesLower Pan-Clutch Hsg Gasket: Tractors w/SRT or QRT (6) M M O I IUU1 1 1 351152 351153 751179 Front Crank Seal Kit Rear Crank Seal Kit "Seal Housing Gasket - 351342" Rear Seal Housing Bolt Kit (Self Locking Bolts & W ashers)M M M M O O6 6 6 4 1 251518 251519 251244 251259 751182 Pin Bushing (Boreable) Pin Bushing (Honeable) Pin Bushing (.010 Oversize OD) Cam Bearing Rear Cam Plug M M M MMM12 1 1 751163 751263 751183 Rod Bolt Head Bolt KitEx Manifold Bolt Kit (8 Bolts & Washers)M M O I U(1)STD Thin Head Gasket - 351534 / Optional Thick Gasket (Piston Protrusion .009-.017") - 351575 (2)Special Cover Screw - 751256APPLICATION: Combines: 6600 After 156500; 6602 After 1500; 7700 After 8000;Tractors: 4230, 4040;QTY ITEM # DESCRIPTION LETTERED ITEMSINCLUDED IN KIT1 959513 Camshaft Kit C1 959313 Basic Valve Kit B1 959113 Valve Train Kit, Thru #532429 V1 959146 Valve Train Kit, After #532429 V1 551191Camshaft (7) (8) C 1 551186 Cam Thrust Plate (4 Bolt / .187" Thick)1 551278 Cam Gear Bolt, Late or Replacement Cam (1/2 x 2.000") (9)12 551181 Tappet C6 451216 STD Exhaust Valve (10) V V B6 451217 STD Intake Valve (11) V V B12 401141 Service Repair Valve Guide (.502" OD / 3.062" OAL) (12)12 451115 Valve Spring V V B6 451187 Exhaust Rotator V V6 451411 Intake Retainer, Thru #5324296 451187 Intake Rotator, After #532429 V12 451198 Valve Wear Cap24 451164 Keeper (Half) V V B6 451412 STD Exhaust Seat (1.500x1.750x.250) ".010 OS - 451414"6 451413 STD Intake Seat (1.687x1.937x.250) ".010 OS - 451415"6 451257 Rocker Arm, LH6 451258 Rocker Arm, RH1 451264 Rocker Arm Shaft (13) (14)1 551279 Cam Timing Gear1 551182 Crank Timing Gear, Early Design Crank (.750" Wide)1 551158 Crank Timing Gear, Late Design Crank (.910" Wide)1 551281 Injection Pump Drive Gear12 551277 Push Rod1 651216 Oil Pump: Combines1 651218 Oil Pump Drive Gear/Shaft 1 651215 Oil Pump Gear Set1 651221 Oil Pump Intake Screen: Tractors1 651217 Oil Cooler1 751123 Crankshaft (6 Bolt Flange)1 751265 Crank Update Parts Kit (2 Keys, 2 Plugs, Dowel Pin, Gear)1 751151 Damper Pulley: Tractors1 751266 Damper Pulley: Combines6 751255 Connecting Rod "Cap Alignment Sleeve - 751262"1 851365 Fuel Pump2 851211 Thermostat: Tractors (180 Degree) (15)2 851174 Thermostat: Combines (180 Degree)1 851255 Water Pump: Tractors "Overhaul Kit w/Impeller - 851256"1 851254 Water Pump: Combine "Overhaul Kit w/Impeller - 851257"1 851248 Block Heater (Press Fit Design)1 851249 Block Heater (Threaded Plug Design)(7)Cam Key - 551173 (8).193" Gear Spacer - 551198 (9)Cam Gear Washer - 551194(10)Oversizes: .003 - 451394 / .015 - 451395 / .030 - 451396 (11)Oversizes: .003 - 451397 / .015 - 451398 / .030 - 451399。
INTERZONE 954 BLACK PART A-中文-化学品安全技术说明书
International Paint Singapore Pte Ltd化学品安全技术说明书EAY999 INTERZONE 954 BLACK PART A版本1 版本修订日 07/05/131.化学品及企业标识1.1.产品名称INTERZONE 954 BLACK PART A产品代码EAY9991.2.纯物质或者混合物的建议用途及禁止用途拟定用途请参阅产品技术说明书仅供专业人员使用施工方法请参阅产品技术说明书1.3.安全技术说明书供应商的信息制造商International Paint Singapore Pte Ltd3 Neythal RoadJurong TownSingapore 628570电话号码+65 6261 5033传真号码+65 6264 46121.4.应急咨询电话+65 6261 5033中毒咨询电话仅供医生及医院参考2.危险性概述2.1.纯物质或混合物的分类2.2.标签要素用第11和12章列出的毒性数据，产品标签如下所示。
预防响应储存处置2.3.其他危害3.成分/组成信息该产品是一种混合物，包含下列危害物质。
成分/化学名称重量 %GHS分类注意环氧树脂CAS 号码: 不提供 >50Eye Irrit. 2;H319Skin Irrit. 2;H315Skin Sens. 1;H317[1]Aquatic Chronic 2;H411C12-C14烷基缩水甘油醚CAS 号码: 0068609-97-2 10-25Skin Irrit. 2;H315Skin Sens. 1;H317[1]氧化铁CAS 号码: 0001317-61-92.5-10[1]丁酮CAS 号码: 0000078-93-3 1-2.5Flam. Liq. 2;H225Eye Irrit. 2;H319STOT SE 3;H336[1][2]3-缩水甘油丙氧基-三甲氧基硅烷CAS 号码: 0002530-83-81-2.5Eye Dam. 1;H318[1]（1）健康或环境危害物质（2）有工作场所有害因素职业接触限值的物质（3）PBT-物质或vPvB-物质*短语的全文参阅第16章。
3551说明书
HIOKI使用手册HIOKI E.E公司3551型电池寿命测试仪内 容介绍 (1)验收 (1)安全 (1)预防措施 (2)手册的组织结构 (4)第1章 概要 (5)1.1 产品概要 (5)1.2 产品特征 (5)第2章 测试仪及功能介绍 (6)第3章 规格说明 (9)3.1 基本参数 (9)3.2 测试范围 (11)3.2.1 最大工作额定电压 (12)3.2.2 绝缘强度 (13)第4章 标准测量 (14)4.1 准备测量 (14)4.1.1 更换电池 (14)4.1.2 连接9418-10交流适配器 (15)4.1.3 测试线和外控开关的连接 (15)4.2 测量电池 (15)4.2.1 测量注意事项 (15)4.2.2 测量 (16)第5章 高级测量功能 (18)5.1 比较器功能 (18)5.1.1 比较器功能的介绍 (18)5.1.2 设置比较器 (18)5.1.3 比较器结果裁决表 (19)5.1.4 启动或关闭比较器 (20)5.1.5 改变比较器的编号 (20)5.2 存储测量值 (20)5.2.1 存储 (21)5.2.2 覆写 (21)5.2.3 清除 (21)5.2.4 读数 (22)5.2.5 打印 (22)5.3 关闭或启动蜂鸣器功能 (23)5.4 锁屏功能 (24)5.5 移动平均数功能 (24)5.6 零调节功能 (24)5.6.1 9465测试线的零调节 (24)5.6.2 9460测试线的零调节 (25)5.7 电池低电压警告 (25)5.8 自动关机模式 (26)5.9 “EXT. HOLD”端和“EXT. MEMO”端的电路图 (27)5.10复位 (27)5.11交流四终端法 (28)5.12铅蓄电池的内阻 (28)第6章 维护 (29)6.1 故障及解决 (29)6.2 参考信息 (30)6.3 清洁 (30)----------------------------------------介绍感谢你购买HIOKI 电池测试仪。
loctite乐泰3491UV胶水中文版MSDS
生物种类
阴性的
不排除致畸可 能。
bacterial reverse mutation assay (e.g Ames test)
哺乳动物细胞基因 突变试验
有或没有 有或没有
硅烷 专有组分
不排除致畸可 能。
家鼠
测试方法
世界经济合作与发展组织
准则
473
（哺乳类动物细胞体外染色
体畸变试验）
世界经济合作与发展组织
保存于阴凉、通风良好的场所，远离热源、火花和明火。容器不用时保持密闭。
第八部分 接触控制/个体防护
国家标准 GBZ 2.1-
2007
无 无 无 (经皮) 6 mg/m3TWA 无 无
ACGIH
无 无 无 2 ppm TWA
无 无
NIOSH
OSHA
无 无 无 无
无 无
提供足够的局部通风以维持工人暴露于职业接触限值以下的浓度环境。
大鼠
NOAEL=0,225
吸入
14 d
mg/kg
大鼠
测试方法
世界经济合作与发展组织 准则 407 （啮齿类动物28天反复经口 毒性试验） 世界经济合作与发展组织 准则 412 （反复吸入毒性试验21/14天）
MSDS-No.: 153581 V001.5
LOCTITE 3491 UNLB 25ML SYRINGE
碳氧化物。 刺激性有机蒸气。
二氧化碳、泡沫、干粉
万一着火，用雾状水保持容器冷却。 配备自给式呼吸器设备，穿全身防护服，如消防战斗服。
第六部分 泄漏应急处理
确保足够的通风。 不得使产品排入下水道或排水沟。
储存于部分充装，封闭的容器中以待进一步处置。 用惰性吸附剂吸收。
乙烯厂碳三阻聚剂技术规格书
乙烯厂碳三阻聚剂技术规格书
附 录 A 外观的测定
A.1方法概述 目视法 A.2仪器
50mL 移液管、150mL 锥形瓶 A.3测定步骤
用50mL 移液管吸取试样50mL ，置于150mL 锥形瓶内，在自然光下目视试样的外观。
附 录 B
4-羟基-2，2,6，6-四甲基哌啶-1-氧自由基的测定
B.1 方法概述
气相色谱法，在选定的工作条件下，样品经汽化通过毛细管色谱柱，使其中各组分得到分离，用氢火焰离子化验仪器检测。
B.2仪器
分析仪器:配有氢火焰离子化检测器
色谱柱：固定相为10%二甲基聚硅氧烷浸渍的弹性石英毛细管柱子 B.3 试剂
氢气:体积分数不低于99.99%，经硅胶与分子筛干燥、净化； 氮气:体积分数不低于99.99%，经硅胶与分子筛干燥、净化； 空气:经硅胶与分子筛干燥、净化； B.4 测定步骤
启动色谱仪，稳定后用进样器进样分析，用色谱工作站处理计算结果。
B.5计算
)100(A =
w I
1
1水W A -⨯∑ 式中：
A 1—4-羟基-2，2,6，6-四甲基哌啶-1-氧自由基的峰面积； A I — 所有组分的峰面积之和；
W 水 —按GB/T6283中直接电量滴定法测定的水含量； 计算至小数点后一位。
B.6红外光谱图
傅利叶红外光谱扫描后得到红外光谱，谱图匹配率≥90%以上为合格。
丙烯酸乙酯MSDS-GHS版
丙烯酸乙酯安全技术说明书主要用途.高分子合成材料单体。
并用于制造涂料、粘合剂、皮革加工处理剂、纺织助剂、油漆添加剂等。
与乙烯•的共聚物是一种热熔性粘合剂；与5%氯乙基乙烯基醚的共聚物是一种耐油、耐热性能良好的合成橡胶,某些情况下可代替丁腈橡胶第二部分：危险性概述1危脸睦S11"易燃衲类别2皮肤腐團剌激类别2眼损伤/砌激类别2A皮肤敏化作用类别1昵性刼2特定目标器官毒性单整匸..次接融：呼吸道剌激疋危害水也境急14S沖心性危害水断境曲°m删U3性1GHS标签要素吨＜^＞①&信号词危险危险性说明H225高廳勰删蒸气H31 5造成皮肤剌黑H31 9H31 7H35 1H33 5可能适成呼HEIOJ^IH40 1物有毒H41Z刘雄生搠有害井具有删持绘罔1防范说胡*预防摧施P20 1脂示°P2O 2在明口所有虫全防护措施之前駅嗣°P21 0远奩热源伙花/明火爲表面。
禁止哄P233怩持客器密诩“P24 O □接45dS<^W^势題P341桂年龌的电气/通凤/瑕明笔设孰P24 2只能筋不产生火花的車P24 3采肛昉止静电放电的措版P261P264作底琢P27 1只^^卜嗣P27 2受沾染的工作月陽不得带出工作馳0P27 3逐瞬施!1环境中BP28O戟防护手套瘠防护鯛防抑舞膚则面具BF512如戟坏适「吁叫解走申心/医生P3O2^P3525D皮跌沾:闻水充分洁洗.P3M+P34O如误q&人:捋受胄人i證至!^新鲜处r操持呼矚适的休息姿势°F30S+P513如堆画或有疑虑；求蚩/就臥P3J2+P313如发生臣.期熾：求團就诊。
P393-^P313如爱生皮拱剌激或皮療：护医用歡.P337-.PJ1S如仍党飜隐：求医/就次PMJ+P3M脱埠所有沾東的衣黏序诟方可里新麒nP3O^P3fil-，P353如皮酣或头蚩^単：立即珈鞋萌抒謹由衣鼠月水淸洗皮肤脯浴。
Dielectric Capillary Cleaning Powder - Alconox, Pa
Dielectric Capillary Cleaning Powder - Alconox, Part Number 5190-1401*************(24小时)化学品安全技术说明书GHS product identifier 应急咨询电话（带值班时间）::供应商/ 制造商:安捷伦科技贸易（上海）有限公司中国（上海）外高桥自由贸易试验区英伦路412号（邮编:200131)电话号码： 800-820-3278传真号码: 0086 (21) 5048 2818Dielectric Capillary Cleaning Powder - Alconox, Part Number 5190-1401化学品的推荐用途和限制用途5190-1401部件号:物质用途:安全技术说明书根据 GB/ T 16483-2008 和 GB/ T 17519-2013GHS化学品标识:电介质毛细管清洁粉末 - Alconox，部件号 5190-1401有关环境保护措施，请参阅第 12 节。
物质或混合物的分类根据 GB13690-2009 和 GB30000-2013紧急情况概述固体。
[粒状固体。
]白色。
轻微H318 - 造成严重眼损伤。
H330 - 吸入致命。
H335 - 可能造成呼吸道刺激。
H400 - 对水生生物毒性极大。
物理状态:颜色:气味:GHS危险性类别警示词:危险:标签要素象形图急性毒性 (口服) - 类别 4急性毒性 (吸入) - 类别 2H315皮肤腐蚀/刺激 - 类别 2H318严重眼损伤/眼刺激 - 类别 1H335特异性靶器官毒性 一次接触 (呼吸道刺激) - 类别 3H400危害水生环境一急性危险 - 类别 1H318 - 造成严重眼损伤。
H330 - 吸入致命。
H335 - 可能造成呼吸道刺激。
H400 - 对水生生物毒性极大。
防范说明预防措施:P271 - 只能在室外或通风良好之处使用。
长春330胶水
长春330胶水长春330胶水是透明、无色、液体单一成份的瞬间接着剂，粘度较高，做为装饰品、填缝、嵌合、家具组合、石材修补等方面的用途，尤其适合多孔状表面材质的接着；技术参数：外观：无色透明液体固化时间，S≤：5-10秒粘度（mpa.s(25℃)：230-270填充间隙，mm:0.20可使用温度℃：－30-80℃保质期：20℃：12个月包装规格：20克／支，50支／盒，600支／箱产品特点：本产品单组份、固化速度快、使用方便、粘接力强、粘接材料广泛，可用于钢铁、有色金属、橡胶、皮革、塑料、陶瓷、玻璃、木材等，但用于聚乙烯、聚丙烯、聚四氟乙烯制品，材料表面需经特殊处理。
广泛用于电器、仪表、机械、电子、光仪、医疗、轻工民用等到行业。
使用方法：1.使用干布或砂纸将接着面的灰尘，油型剂，钢锈等除去，再以丙酮或三氯乙烯擦拭，以清洁接着面。
2.打开前盖，并以手指轻弹尖端部分，使不留有残余液体，再以附针戳开孔穴。
3.在被接着面滴一小滴接着剂，即刻进行接着，并保持至硬化为止，硬化时人数秒至数分不等；约30分钟即可连到实用强度，12小时后可达到最高强度。
4.使用后擦拭容器尖端，并将盖子盖上。
5.使用完毕请将本剂存放在阴凉干燥处。
CA330胶水的成分是α-氰基丙烯酸乙酯。
主体成份:NCH2=C-COOC2H5物化性质:无色透明、低粘度、不可燃性液体，单一成分、无溶剂，稍有刺激味、易挥发、挥发气具弱摧泪性。
遇潮湿水气即被催化，迅速合固化粘着。
固化后无毒。
安全事项：1）勿穿戴编织手套使用：瞬间胶对手套的编织材料吸收将迅速发生聚合反应，反应热会烧伤手，所以请勿穿戴编织手套。
2）保持通风：CA330胶水蒸汽具有刺激性,在大量使用时工作场所应保持通风。
3）使用方法：尽可能清除接着面上的不洁物如油、灰尘、土等。
在移开时先以手指轻弹瓶子尖嘴部份，让尖嘴内胶水流回容器，并将尖嘴头远离你的脸，再以图钉在尖嘴上开一个洞。
4）泄漏：当大量泄漏时可用水固化后再刮除。
HIOKI 3454-51数字兆欧表 日本日置 HIOKI
Safety system for high voltage measurement ● Sliding cover Basic specifications Model 3454-11/51 250 V DC (testing voltage), 4.000 M-ohm to 500 M-ohm (measurement range), Accuracy at first effective range ±3 %rdg. ±4 dgt. at 0.200 to 50.0 M-ohm 500 V DC (testing voltage), 4.000 M-ohm to 500 M-ohm (measurement range), Accuracy at first effective range ±3 %rdg. ±4 dgt. at 0.200 to 50.0 M-ohm 1000 V DC (testing voltage), 4.000 M-ohm to 4000 M-ohm (measurement range), Accuracy at first effective range ±3 %rdg. ±4 dgt. at 0.200 to 200.0 M-ohm Model 3454-10 50 V DC (testing voltage), 4.000 M-ohm to 200.0 M-ohm (measurement range), Accuracy at first effective range ±3 %rdg. ±4 dgt. at 0.200 to 10.00 M-ohm 125 V DC (testing voltage), 4.000 M-ohm to 200.0 M-ohm (measurement range), Accuracy at first effective range ±3 %rdg. ±4 dgt. at 0.200 to 10.00 M-ohm
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
330495-1 Product Details
Home | Customer Support | Suppliers | Site Map | Privacy Policy | Browser Support
© 2008 Tyco Electronics Corporation All Rights Reserved Search
Products Documentation Resources My Account Customer Support
Home > Products > By Type > > .050 Inch Centerline > Product Feature Selector > Product Details
330495-1
TE Part Number: 330495-1
Active
Add to Part List .100, .125, .156 Centerline Wrap-Type and
TERMI-TWIST
Not reviewed for RoHS Compliance
Product Highlights:
?Clip-Style Contact
?Post Size = 0.79 x 1.57 [.031 x .062]
mm [in]
?Gold (3) Contact Mating Area Plating
Material
?Termination Style = TERMI-POINT
View all Features | Find Similar
Products
Check Pricing &
Availability
Search for Tooling
Product Feature
Selector
Contact Us About
This Product
Quick Links
Documentation & Additional Information
Product Drawings:
?termi-point clip .031x.062 system(PDF, English)
Catalog Pages/Data Sheets:
?None Available
Product Specifications:
?None Available
Application Specifications:
?None Available
Instruction Sheets:
?AMP* TERMI-POINT TOOL AND CLIP SELECTION DATA(PDF,
English)
CAD Files:
?None Available
List all Documents Additional Information:
?Product Line Information
Related Products:
?Tooling
Product Features (Please use the Product Drawing for all design activity)
Product Type Features:
?Product Type = Clip-Style Contact
?Post Size (mm [in]) = 0.79 x 1.57 [.031 x .062]
?Termination Style = TERMI-POINT
?Wire Size (mm²[AWG]) = 0.08-0.09²[28]
Contact Related Features:
?Contact Mating Area Plating Material = Gold (3)
Housing Related Features:
?Clip-Style Contact Color = Black Industry Standards:
?RoHS/ELV Compliance = Not reviewed for
ELV/RoHS compliance
?Lead Free Solder Processes = Not reviewed for
lead free solder process
Packaging Related Features:
?Packaging Quantity = 40 Strips/25 Pieces Each Other:
?Brand = AMP
Provide Website Feedback | Need Help?。