acerpure sv552-10w 無線吸塵器 使用說明書说明书

目 錄
05
06
07
08
09
10
11
12
12
13
安全指示表示應「禁止」表示需「注意」
電池說明與規格表示應「禁止」表示需「注意」
電池型號
提供一顆或兩顆電池，電池數量視購買的型號而有所不同。

· 型號名稱：PF072LMG
· 類型：充電式鋰離子電池
· 額定電壓：DC 25.2 V⎓
· 容量：2500mAh/ 63Wh
產品配備與結構
手持吸塵器主機
充電式鋰離子電池延長管
壁掛架+固定螺絲
電源供應器
說明書+保證卡
電動渦輪刷吸頭電動除螨刷頭隙縫清潔吸頭
二合一吸頭
1
2
３4
5
6
[ 主機配件 ]
[ 吸頭刷 ]
產品結構
18
910
1112
14
23
4
5
6
7
8. 電池9. 壁掛架10. 集塵盒11. 二合一吸頭12. 隙縫清潔吸頭13. 電源供應器14. 電動除螨刷頭
請按下電池的拆卸按鈕並將其放入手持吸塵器的頂部。

正確安裝後，請確實將電池卡入到位。

1. 待您開機後，本產品共有5
式顯示當前電池的電量。

2. 當本產品的5 待產品充滿電後，5 且於完成充電5分鐘後關閉指示燈，進入睡 眠模式。

請注意，當電池電量低於3% 動關機。

充電口位於電池上。

請將充電器插入電源插座，即可為機器充電；您也可以取出電池，單獨為電池充電。

請注意 : 充電時請勿使用吸塵器。

電池安裝與充電
電池
電池拆卸按鈕手持吸塵器
產品組裝與使用
請將延長管插入手持吸塵器主機中，並確認其卡入到位。

將電動渦輪刷吸頭插入延長管中，並確認其卡入到位，按下吸頭拆卸鍵即可移除管子。

手持輕便版組裝
請將二合一吸頭/隙縫清淨吸頭/電動除螨刷頭插入至手持吸塵器主機中，並確認其卡入到位。

使用前請確保吸塵器電池有充足電量。

首次使用時請先為產品充電3小時。

手持延長版組裝
您也可將二合一吸頭/隙縫清淨吸頭/電動除螨刷頭插入至延長管，再結合至手持吸塵器主機中，並確認其卡入到位。

電源開啟/關閉
您可以開始或停止使用本產品。

吸力模式調整鍵
本產品共有三段吸塵速度模式 (極強、標準與節能模式)，可依需求調配速度，以達最佳清潔效果。

清潔與保存
請關閉吸塵器電源，按下集塵盒開啟按鈕，即可一鍵清空集塵盒。

集塵盒開啟按鈕
[取出濾網]
將集塵杯中的灰塵清空後，即可將濾網取出。

集塵杯的底部亦可拆卸，您可以使用隨附的的清潔刷清洗金屬濾網和海綿過濾網。

請注意 :
在濾網必須完全乾燥後， 才能重新安裝回本產品中。

將吸塵器電源關閉後，您可使用硬幣或其他工具轉開並解鎖滾刷鎖，即可取下電動渦輪刷或電動除蟎刷進行清潔。

使用包裝隨附的螺絲將壁掛架安裝在牆上，並將本產品插入掛鉤中。

二合一吸頭和隙縫清淨吸頭可以存放在壁掛架上，如右圖所示。

請注意不可將產品懸空。

限用物質含有情況標示
1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

3.
〝－〞係指該項限用物質為排除項目。

尋求售後服務之前
若發現產品有故障的問題，在連絡客服之前，請先檢查以下事項。

規格
公司資訊
台灣客服專線：0800-520-555
T able of Contents
05
06
07
08
09
10
11
12
13
Specifications
Battery model
Available with one or two batteries, the number of batteries varies depending on the model purchased.
· Model name: PF072LMG
· T ype: Rechargeable Lithium-ion Battery
· Rated voltage: DC 25.2 V⎓
· Capacity: 2500mAh/ 63Wh
Product Configuration and Structure
Handheld Vacuum
Cleaner
Rechargeable Lithium-ion
Battery
Extension T ube
Wall Mount + Fixation Screws
Power Supply
User Manual + Warranty Card
Main Cleaner Mite T urbo Brush Crevice T ool 2 in 1 Brush
1
2
34
5
6
[ Device Accessories ]
[ Tip Brush
Product Structure
18
910
1112
14
23
4
5
6
7
8. Battery
9. Wall Mount Rack 10. Dust Box 11. 2 in 1 Brush 12. C revice T ool 13. Power Supply 14. M ite T urbo Brush
Please press the battery removal
button, and place it inside the top of
the handheld vacuum cleaner. Once
the battery has been correctly
installed, make sure to snap the
battery back into place.1. A
display the current battery level.
2. W hen the 5 indicator lights of this product are
charging process, all five indicator lights will
the five indicators will return to their normal
state of being on, and the indicator will be
Sleep Mode.
P lease note that this product will
automatically shut down when the battery
level drops below 3%.
The charging port is located on the battery. Plug
the charger into a power outlet to charge the
device, or remove the battery and charge the
battery separately.
N ote: Do not use the vacuum cleaner while
charging.
Battery Installation and Charging
Battery Battery Removal
Button Handheld Vacuum Cleaner
Product Assembly and Usage
Install the extension tube onto the
vacuum cleaner, and make sure it
clicks into place.
Install the Main Cleaner onto the
extension tube, and make sure it
snaps into place. Press the head
removal button to remove the
vacuum head.Handheld Lightweight Version
Assembly
Please install the 2 in 1 Brush/Crevice
T ool/Mite T urbo Brush onto the
that it clicks into place.
Please make sure that the vacuum cleaner is fully charged before use. Please charge the product for 3 hours before using it for the first time.
Handheld Extended Version Assembly
You can also install the 2 in 1 Brush/
Crevice T ool/Mite T urbo Brush onto
the extension tube, and then
combine it with the Handheld
Vacuum Cleaner, and make sure that it clicks into place.
Power ON/OFF You can press it to start or stop using this product . Suction Mode Adjustment Button This product has three vacuum suction modes (T urbo, Daily, Energy-saving modes), which can be
adjusted according to your needs to achieve the best cleaning effect.
Cleaning and Preservation
Please turn off the vacuum cleaner's power
and press the dust box opening button to empty the dust box with one click.
Dust Box Opening Button
The filter can be removed after the dust
in the dust box has been emptied. The
bottom of the Dust Box is also
removable, and you can use the included
cleaning brush to clean the metal and
sponge filters.
P LEASE NOTE: The filter must be
completely dry before it is
reinstalled onto the product.After turning the vacuum cleaner off,
you can use a coin or other tool to turn
and unlock and remove the Main
Cleaner & Mite T urbo Brush for cleaning.Attach the wall mount to the wall using
the screws provided in the package, and
insert the product onto the hooks. The 2
in 1 Brush and Crevice T ool can be
stored on the wall mount, as shown in
the photo to the right.
P lease note that the product
cannot be left hanging in the air.
Before Seeking After-sales Service
If you discovered that the product malfunctioned, please check the following items before contacting customer service.
Specifications
Company Information 。