FURUNO电子海图完整题库
FURUNO ECDIS Multiple Choice Test 古野电子海图题库测试题
1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship’s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b. I c an set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copy of Ow n Ship’s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operator from information received from the Pilot – a Navtex message – a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chartproducer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS and this is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for danger to navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have aRange/Bearing observation from your RADAR? ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNO ECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. error精选文档c. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue – it means? ( A )a. License is valid – chart is up-to-dateb. License is valid – chart is NOT up-to-datec. License is available – chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue – it means? ( C )a. License is valid – chart is up-to-dateb. License is available – chart not installedc. License is valid – up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check? ( A )a. Yes – the only thing preventing me from monitoring would be an impossible Turn message in the WPT tab.b. Yes – if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship’s current position in the Logs? ( D )a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting? ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don’t. The route is automatical ly saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I select “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar – then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.b. In Chart Display.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart – Route – etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated – it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update – only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Plan moded. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Navi mode74. How can you tell if your FURUNO ECDIS is displaying an ENC? ( D )a. There is an “ENC Data available” indication in the Own Ship Function Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problems along own ship’s heading line? ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection? ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route? ( D )a. Nowhere – because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS? ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS? ( A )a. In Chart Alertb. In the route planning tool – on the Alerts tabc. In Chart Displayd. No where – it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS? ( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function? ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on a normal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas –No Go areas – clearing lines etc.? ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS? ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor? ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display – User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object (Buoy-Beacon-Berth etc.) on the FURUNO ECDIS? ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter? ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record精选文档menu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart? ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart object with the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts? ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring? ( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I select Monitor for the desired user chart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart? ( A )a. I select Note as an option for the Area Line or Circle where the information should be displayed.b. I select Note as an option for the Tidal Label or Clearing Line where the information should be displayed.c. I select User Chart from the Main menu and then I select Plan and enter the note to be displayed.d. I left click on Route in the Quick Access Bar and then I select Monitor91. What is the recommended loading sequence when you receive new charts-updates and permits? ( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode? ( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. When the software of the FURUNO ECDIS is being updated – it is important that? ( A )a. The software is updated by a FURUNO Service Engineer.b. The software is updated by the Captain.c. The sof tware is updated by the Ship’s Electrical Engineerd. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date精选文档C. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate? DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate? DA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum changeWhat does the alert number 031 indicate? BA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout单选题] What does the alert number 640 indicate? BA. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)What does the alert number 635 indicate? AA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) errorWhat does the alert number 380 indicate? CA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error单选题] What does the alert number 495 indicate? AA. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init. ErrorWhat does the alert number 450 indicate? DA. Route: Illegal To WPTB. RADAR comm. errorC. LAN adapter version errorD. Heading sensor not available单选题] What does the alert number 820 indicate? CA. AIS lostB. TT lost。
FURUNO ECDIS Multiple Choice Test 古野电子海图题库测试题
1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship’s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b. I can set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copy of Own Ship’s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operator from information received from the Pilot – a Navtex message – a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chart producer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS and this is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for danger to navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have aRange/Bearing observation from your RADAR? ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNO ECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue – it means? ( A )a. License is valid – chart is up-to-dateb. License is valid – chart is NOT up-to-datec. License is available – chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue – it means? ( C )a. License is valid – chart is up-to-dateb. License is available – chart not installedc. License is valid – up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check? ( A )a. Yes – the only thing preventing me from monitoring would be an impossible Turn message in the WPT tab.b. Yes – if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship’s current position in the Logs? ( D )a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting? ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don’t. The route is automatically saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I select “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar – then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.b. In Chart Display.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart – Route – etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated – it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update – only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Plan moded. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Navi mode74. How can you tell if your FURUNO ECDIS is displaying an ENC? ( D )a. There is an “ENC Data available” indication in the Own Ship F unction Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problems along own ship’s heading line? ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection? ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route? ( D )a. Nowhere – because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS? ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS? ( A )a. In Chart Alertb. In the route planning tool – on the Alerts tabc. In Chart Displayd. No where – it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS? ( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function? ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on a normal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas –No Go areas – clearing lines etc.? ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS? ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor? ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display – User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object (Buoy-Beacon-Berth etc.) on the FURUNO ECDIS? ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter? ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record menu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart? ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart object with the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts? ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring? ( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I select Monitor for the desired user chart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart? ( A )a. I select Note as an option for the Area Line or Circle where the information should be displayed.b. I select Note as an option for the Tidal Label or Clearing Line where the information should be displayed.c. I select User Chart from the Main menu and then I select Plan and enter the note to be displayed.d. I left click on Route in the Quick Access Bar and then I select Monitor91. What is the recommended loading sequence when you receive new charts-updates and permits? ( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode? ( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. When the software of the FURUNO ECDIS is being updated – it is important that? ( A )a. The software is updated by a FURUNO Service Engineer.b. The software is updated by the Captain.c. The software is updated by the Ship’s Electrical Engineerd. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate? DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate? DA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum changeWhat does the alert number 031 indicate? BA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout单选题] What does the alert number 640 indicate? BA. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)What does the alert number 635 indicate? AA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) errorWhat does the alert number 380 indicate? CA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error单选题] What does the alert number 495 indicate? AA. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init. ErrorWhat does the alert number 450 indicate? DA. Route: Illegal To WPTB. RADAR comm. errorC. LAN adapter version errorD. Heading sensor not available单选题] What does the alert number 820 indicate? CA. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarmWhich information can you find in the Vector Chart Legend? CA. Notices To MarinersB. Presentation Library edition numberC. Chart edition && Update dateD. Safety Contour settingWhen an ENC is outlined in Magenta in the Chart Catalogue - it means? C。
（完整版）FURUNOECDISMultipleChoiceTest古野电子海图题库测试题
（完整版）FURUNOECDISMultipleChoiceTest古野电子海图题库测试题1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship’s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b.I can set the ECDIS to automatically choosing a Safety contour based on my setting of ship’smaximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there isnot sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details tothe past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or aftercompletion of a voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copyof Own Ship’s past track (120 minutes max.) on a USB memorydevice and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operator from information receivedfrom the Pilot–a Navtex message–a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chartproducer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS and this is not yetincluded in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route duringa voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for dangerto navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have aRange/Bearing observation from your RADAR? ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert theobservation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR asdocumentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNOECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue–it means? ( A )a. License is valid–chart is up-to-dateb. License is valid–chart is NOT up-to-datec. License is available–chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue–it means? ( C )a. License is valid–chart is up-to-dateb. License is available–chart not installedc. License is valid–up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed theRoute Plan Check? ( A )a. Yes–the only thing preventing me from monitoring would be an impossible Turn message inthe WPT tab.b. Yes–if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentationLibrary from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually rec ord Own Ship’s current position in the Logs? ( D)a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to doso byNotice T o Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly updateCDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting?( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don’t. The route is automatically saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observationsentered by the operator.c. The filter continuously monitors the position given by each individual position sensor todetermine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switchedoff when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I selec t “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar–then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart–Route–etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load &Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is beingupdated–it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planninga route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used duringmonitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update–only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in theinformation sidebar.。
(完整版)FURUNOECDISMultipleChoiceTest古野电子海图题库测试题
1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship’s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b.I can set the ECDIS to automatically choosing a Safety contour based on my setting of ship’smaximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there isnot sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details tothe past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copyof Own Ship’s past track (120 minutes max.) on a USB memorydevice and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operator from information receivedfrom the Pilot–a Navtex message–a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chartproducer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS and this is not yetincluded in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route duringa voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for dangerto navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have aRange/Bearing observation from your RADAR? ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert theobservation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNOECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue–it means? ( A )a. License is valid–chart is up-to-dateb. License is valid–chart is NOT up-to-datec. License is available–chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue–it means? ( C )a. License is valid–chart is up-to-dateb. License is available–chart not installedc. License is valid–up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed theRoute Plan Check? ( A )a. Yes–the only thing preventing me from monitoring would be an impossible Turn message inthe WPT tab.b. Yes–if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentationLibrary from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship’s current position in the Logs? ( D)a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to doso byNotice To Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly updateCDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting?( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don’t. The route is automatically saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observationsentered by the operator.c. The filter continuously monitors the position given by each individual position sensor todetermine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switchedoff when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I selec t “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar–then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart–Route–etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load &Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated–it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used duringmonitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update–only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then on “Route Info” in theQuick Access Bar when in Plan moded. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Navimode74. How can you tell if your FURUNO ECDIS is displaying an ENC? ( D )a. There is an “ENC Data available” indication in the Own Ship Funct ion Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problems along own ship’sheading line? ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection? ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route?( D )a. Nowhere–because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS? ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS? ( A )a. In Chart Alertb. In the route planning tool–on the Alerts tabc. In Chart Displayd. No where–it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS?( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function? ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with themonitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on anormal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying iscompleted I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas–NoGo areas–clearing lines etc.? ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS? ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor? ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display–User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object (Buoy-Beacon-Berth etc.) on the FURUNOECDIS? ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter? ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Recordmenu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart? ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart object with the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts? ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring? ( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I select Monitor for the desired userchart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart? ( A )a. I select Note as an option for the Area Line or Circle where the information should bedisplayed.b. I select Note as an option for the Tidal Label or Clearing Line where the information shouldbe displayed.c. I select User Chart from the Main menu and then I select Plan and enter the note to bedisplayed.d. I left click on Route in the Quick Access Bar and then I select Monitor91. What is the recommended loading sequence when you receive new charts-updates and permits?( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode? ( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. When the software of the FURUNO ECDIS is being updated–it is important that? ( A )a. The software is updated by a FURUNO Service Engineer.b. The software is updated by the Captain.c. The software is updated by the Ship’s Electrical Engineerd. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate? DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate? DA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum changeWhat does the alert number 031 indicate? BA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout单选题] What does the alert number 640 indicate? BA. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)What does the alert number 635 indicate? AA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) errorWhat does the alert number 380 indicate? CA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error单选题] What does the alert number 495 indicate? AA. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init. ErrorWhat does the alert number 450 indicate? DA. Route: Illegal To WPTB. RADAR comm. errorC. LAN adapter version errorD. Heading sensor not available单选题] What does the alert number 820 indicate? CA. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarmWhich information can you find in the Vector Chart Legend? CA. Notices To MarinersB. Presentation Library edition numberC. Chart edition && Update dateD. Safety Contour settingWhen an ENC is outlined in Magenta in the Chart Catalogue - it means? C A. License is valid - chart is up-to-date.。
FURUNO-电子海图-完整题库
1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading sensor not available3. What does the alert number 495 indicate?A. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init.4. What does the alert number 380 indicate?A. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate?A. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate?A. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18.Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesB NameC WarningsD Safety Contour setting30. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33.Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insertthe observation in the Record User Event window.<Cell>b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display onthe GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my settingof Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the chartswhere there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.<Cell>b<Cell>142How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memorydevice.D I can create a User Chart from the Voyage Log and save it to a USB memory device. 44Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an externalstorage.46Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding furtherdetail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51What is a Manual Update?A A Manual update is an update applied using the Manual function in Load && UpdateCharts.B A Manual update is an update to the charts created by the operator from informationreceived from the Pilot - a Navtex message - a VHF broadcast etc.C A Manual update is an update applied to the charts by an official representativeof the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS. 52How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the File Export tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendB In the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No61Can you create a Manual Update from a Navtex Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No62Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63Where can you update the ENCs?A In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue. 66How are regular T&Ps updated on the ECDIS?A T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in theLoad && Update function of the Chart Menu.C Most T&&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.D I cannot update T&&Ps on the FURUNO ECDIS.67How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue. 68How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file using the file named ENC.PMT and then I use the S52Presentation Library from the System menu in the Chart Menu to convert the ENCsinto SENCs.69What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart72How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information shouldbe displayed.B I select Note as an option for the Tidal Label or Clearing Line where the informationshould be displayed.C I select User Chart from the Main menu and then I select Plan and enter the noteto be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User Chart being used for monitoring?A I move the monitored route plan to planning mode and edit the Linked User Chartsetting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for thedesired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed report77Which printing option is available for the User Chart?A Full reportB System reportC Clearing Line ReportD Detailed report78Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?A Circle ReportB Full reportC System reportD Detailed report80Which printing option is available for the User Chart?A Label ReportB Full reportC System reportD Detailed report81Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsB On all chartsC Only on vector chartsD Only on raster charts82How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDISscreen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inPlan mode.D By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inNavi mode.83What is the name of category of charts generated by the user to draw up contingency areas - No Go areas - clearing lines etc.?A Private ChartB Pilot DataC User ChartD Non HO Chart84How do you open the User Chart planning tool?A I select "Planning" and then "User Chart" in the Quick Access bar when in Planmode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navimode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85Can you edit the User Chart when the ECDIS is in Navi mode?A YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.D No86What is a Point in the User Chart?A A point is used to create a Manual Update from a chart object.B A point is used to denote/highlight the position of a chart object with the UserChart.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to another?A NoB >Yes - by using the Backup and Restore dialogue to transfer the Manual Updatesto a USB.C Yes - by sending the Manual updates via an email.D No - but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual Update?A Always when I have to update my charts.B When I receive information which must be displayed on my ECDIS and this is notyet included in the official weekly updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitored?A The name of the route will be displayed on my own ship vector.B The name of the route will be displayed in the Route Information box.C By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitored?A By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inPlan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inNavi mode.D I cannot get information on the route which is being monitored.94 Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check?A Yes - the only thing preventing me from monitoring would be an Impossible Turnmessage in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted Area - CautionArea etc.).95 What should you remember to set up before planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.D The Chart Viewing Dates96 What should you remember to set up first when planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenuC The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been edited?A I don't. The route is automatically saved to the hard disc drive whenever changesare applied.B I click on Save or Save As in the Route Planning tool.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning tool?A I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.D I click on Route in the Quick Access bar.99 Can you open the route planning tool when the ECDIS is in Chart mode?A Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.D No100 Where do you set up the Safety Contour used for planning your route?A On the Parameters tab of the Route Planning tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route plan?A Yes in the Ship and Route parameters of the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another route?A NoB Yes but only if I have two ECDIS.C Yes the route planning function is independent from the route monitoring function.D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring function?A NoB Yes but I must copy it to another ECDIS where it can be edited without interferingwith the monitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the fileon a normal office PC.D Yes if I select Copy from monitor in the Route plan menu and edit the copy. Whencopying is completed I select-Exchange with monitor in the Route Plan menu. 104 Which operation can you perform with the FURUNO ECDIS?A I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.D I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.105 Where can you change the setting of the Safety Contour which is used during planning of a route?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart AlertD In the route planning tool.106 Where can you change the settings for the Safety Contour used for monitoring?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?A In Chart AlertB In the route planning tool - on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDIS?A The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS tostart up.C The Kalman Filter is a filter which continuously monitors the status and validityof the navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to theRADAR GPS and AIS.109 Which of these settings generate an alarm from the Chart Alert setting?A Shallow ContourB Safety DepthC Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route Parameters?A Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route Parameters?A Chart alignmentB Safety ContourC Maximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route Parameters?A Position offsetB Safety ContourC Alarm volumeD Ship's maximum speed。
FURUNO电子海图完整题库完整
FURUNO电子海图完整题库完整1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading sensor not available3. What does the alert number 495 indicate?A. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init.4. What does the alert number 380 indicate?A. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate?A. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate?A. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18.Where do you switch between Multicolor and Two Colorsettings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue -it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesB NameC WarningsD Safety Contour setting30. Which information can you find in the Vector Chart Legend?A Notices T o MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33.Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insertthe observation in the Record User Event window.b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display onthe GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my settingof Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the chartswhere there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.b142How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memorydevice.D I can create a User Chart from the Voyage Log and save it to a USB memory device. 44Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an externalstorage.46Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding furtherdetail to the past Voyage.B I can create a User Chart from the monitored Route Planand save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.。
FURUNOECDISMultipleChoiceTest古野电子海图题库测试题
1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship’s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b. I can set the ECDIS to automatically choosing a Safety contour basedon my setting of ship’s maximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas inthe charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance andone bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display onthe RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for displayon the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to aUSB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion ofa voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copy of Own Ship’s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operatorfrom information received from the Pilot – a Navtex message – a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chart producer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS andthis is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for danger to navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have a Range/Bearing observation from your RADAR? ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNO ECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue – it means? ( A )a. License is valid – chart is up-to-dateb. License is valid – chart is NOT up-to-datec. License is available – chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue – it means? ( C )a. License is valid – chart is up-to-dateb. License is available – chart not installedc. License is valid – up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed theRoute Plan Check? ( A )a. Yes – the only thing preventing me from monitoring would be an impossible Turn message in the WPT tab.b. Yes – if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship’s current position in the Logs? ( D )a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting? ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don’t. The route is automatically saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I select “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar – then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.b. In Chart Display.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart – Route – etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated – it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update – only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right cornerof the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Barwhen in Plan moded. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Navi mode74. How can you tell if your FURUNO ECDIS is displaying an ENC? ( D )a. There is an “ENC Data available” indication in the Own Ship Function Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problemsalong own ship’s heading line? ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection? ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route? ( D )a. Nowhere – because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS? ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS? ( A )a. In Chart Alertb. In the route planning tool – on the Alerts tabc. In Chart Displayd. No where – it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS? ( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function? ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB andedit the file on a normal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas –No Go areas – clearing lines etc.? ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS? ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor? ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display – User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object (Buoy-Beacon-Berth etc.) on the FURUNO ECDIS? ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter? ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record menu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart? ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart objectwith the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts? ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring? ( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I selectMonitor for the desired user chart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart? ( A )a. I select Note as an option for the Area Line or Circle where the information should be displayed.b. I select Note as an option for the Tidal Label or Clearing Line where the information should be displayed.c. I select User Chart from the Main menu and then I select Plan andenter the note to be displayed.d. I left click on Route in the Quick Access Bar and then I selectMonitor91. What is the recommended loading sequence when you receive new charts-updates and permits? ( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode? ( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. When the software of the FURUNO ECDIS is being updated – it is important that? ( A )a. The software is updated by a FURUNO Service Engineer.b. The software is updated by the Captain.c. The software is updated by the Ship’s Electrical Engineerd. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate? DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate? DA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum changeWhat does the alert number 031 indicate? BA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout单选题] What does the alert number 640 indicate? BA. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)What does the alert number 635 indicate? AA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) errorWhat does the alert number 380 indicate? CA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error单选题] What does the alert number 495 indicate? AA. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init. ErrorWhat does the alert number 450 indicate? DA. Route: Illegal To WPTB. RADAR comm. errorC. LAN adapter version errorD. Heading sensor not available单选题] What does the alert number 820 indicate? CA. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarmWhich information can you find in the Vector Chart Legend? CA. Notices To MarinersB. Presentation Library edition numberC. Chart edition && Update dateD. Safety Contour settingWhen an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.单选题] When an ENC is outlined in Yellow in the Chart Catalogue - it means? CA. License is valid - chart is NOT up-to-date.B. License is available - chart not installeD:C. License is valid - up-to-date status doubtful.D. License is not available or has expireD:When an ENC is outlined in Red in the Chart Catalogue - it means? DA. License is valid - chart is NOT up-to-date.B. License is available - chart not installeD:C. License is valid - up-to-date status doubtful.D. License is not available or has expiredWhen an ENC is outlined in Blue in the Chart Catalogue - it means? DA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installeD:D. Cancelled chart.。
FURUNOECDISMultipleChoiceTest古野电子海图题库测试题
1.W h i c h o p e r a t i o n c a n y o u p e r f o r m o n t h e F U R U N O E C D I S(B)a.I c a n p l a y b a c k m y s h i p’s p a s t t r a c k o n t h e E C D I Sb.I c a n r e c o r d m y p o s i t i o n m a n u a l l y o n t h e R N C s.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS ( A )a. I can record my position manually on the ENCs.b. I can set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage ( D )a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copy of Own Ship’s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operator from information received from the Pilot – a Navtex message – a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chart producer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS and this is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for danger to navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have a Range/Bearing observation from your RADAR ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNO ECDIS ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate ( D )a. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue – it means ( A )a. License is valid – chart is up-to-dateb. License is valid – chart is NOT up-to-datec. License is available – chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue – it means ( C )a. License is valid – chart is up-to-dateb. License is available – chart not installedc. License is valid – up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check ( A )a. Yes – the only thing preventing me from monitoring would be an impossible Turn message in the WPT tab.b. Yes – if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship’s current position in the Logs ( D )a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting ( C )a. Shallow Contourb. Safety Depthc. Safety Contour52. Can you plan a route while you monitor another route ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited ( B )a. I don’t. The route is automatically saved to the hard disc drive whenever chan ges are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool ( A )a. I select “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar – then I select Plan.59. Where do you select the color Palette used to display the charts ( C )a. In Chart Legend.b. In Chart Display.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart – Route – etc.) ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles) ( B )b. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style) ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated – it is important that ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update – only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menu72-1. How can you verify which route is being monitored ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Plan moded. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Navi mode74. How can you tell if your FURUNO ECDIS is displaying an ENC ( D )a. There is an “ENC Data available” indication in the Own Ship Function Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problem s along own ship’s heading line ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route ( D )a. Nowhere – because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS ( A )a. In Chart Alertb. In the route planning tool – on the Alerts tabc. In Chart Displayd. No where – it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS ( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on a normal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas –No Go areas – clearing lines etc. ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display – User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object (Buoy-Beacon-Berth etc.) on the FURUNO ECDIS ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record menu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart object with the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring ( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I select Monitor for the desired user chart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart ( A )a. I select Note as an option for the Area Line or Circle where the information should be displayed.b. I select Note as an option for the Tidal Label or Clearing Line where the information should be displayed.c. I select User Chart from the Main menu and then I select Plan and enter the note to be displayed.d. I left click on Route in the Quick Access Bar and then I select Monitor91. What is the recommended loading sequence when you receive new charts-updates and permits ( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode ( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. When the software of the FURUNO ECDIS is being updated – it is important that ( A )a. The software is updated by a FURUNO Service Engineer.b. The software is updated by the Captain.c. The software is updated by the Ship’s Electrical Engineerd. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate DA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum changeWhat does the alert number 031 indicate BA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout单选题] What does the alert number 640 indicate BA. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)What does the alert number 635 indicate AA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) errorWhat does the alert number 380 indicate CA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error单选题] What does the alert number 495 indicate AA. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init. ErrorWhat does the alert number 450 indicate DA. Route: Illegal To WPTC. LAN adapter version errorD. Heading sensor not available单选题] What does the alert number 820 indicate CA. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarmWhich information can you find in the Vector Chart Legend CA. Notices To MarinersB. Presentation Library edition numberC. Chart edition && Update dateD. Safety Contour settingWhen an ENC is outlined in Magenta in the Chart Catalogue - it means CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.单选题] When an ENC is outlined in Yellow in the Chart Catalogue - it means CA. License is valid - chart is NOT up-to-date.B. License is available - chart not installeD:C. License is valid - up-to-date status doubtful.D. License is not available or has expireD:When an ENC is outlined in Red in the Chart Catalogue - it means DA. License is valid - chart is NOT up-to-date.B. License is available - chart not installeD:C. License is valid - up-to-date status doubtful.D. License is not available or has expiredWhen an ENC is outlined in Blue in the Chart Catalogue - it means DA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installeD:D. Cancelled chart.When an ENC is outlined in Orange in the Chart Catalogue - it means BA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installeD:D. Cancelled chart.When an ENC is outlined in Green in the Chart Catalogue - it means AA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installeD:D. License is not available or has expireD:Where can you find information concerning the charts stored on the HDD CA. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.Where do you switch between Multicolor and Two Color settings for the charts CA. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart DisplayWhere do you select the color Palette used to display the charts CA. In Chart LegendB. In Chart Display。
FURUNO 电子海图 完整题库
1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading sensor not available3. What does the alert number 495 indicate?A. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init.4. What does the alert number 380 indicate?A. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate?A. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate?A. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18.Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesB NameC WarningsD Safety Contour setting30. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33.Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insertthe observation in the Record User Event window.<Cell>b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display onthe GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my settingof Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the chartswhere there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.<Cell>b<Cell>142How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memorydevice.D I can create a User Chart from the Voyage Log and save it to a USB memory device. 44Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an externalstorage.46Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding furtherdetail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51What is a Manual Update?A A Manual update is an update applied using the Manual function in Load && UpdateCharts.B A Manual update is an update to the charts created by the operator from informationreceived from the Pilot - a Navtex message - a VHF broadcast etc.C A Manual update is an update applied to the charts by an official representativeof the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS. 52How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the File Export tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendB In the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No61Can you create a Manual Update from a Navtex Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No62Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63Where can you update the ENCs?A In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue. 66How are regular T&Ps updated on the ECDIS?A T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in theLoad && Update function of the Chart Menu.C Most T&&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.D I cannot update T&&Ps on the FURUNO ECDIS.67How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue. 68How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file using the file named ENC.PMT and then I use the S52Presentation Library from the System menu in the Chart Menu to convert the ENCsinto SENCs.69What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart72How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information shouldbe displayed.B I select Note as an option for the Tidal Label or Clearing Line where the informationshould be displayed.C I select User Chart from the Main menu and then I select Plan and enter the noteto be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User Chart being used for monitoring?A I move the monitored route plan to planning mode and edit the Linked User Chartsetting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for thedesired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed report77Which printing option is available for the User Chart?A Full reportB System reportC Clearing Line ReportD Detailed report78Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?A Circle ReportB Full reportC System reportD Detailed report80Which printing option is available for the User Chart?A Label ReportB Full reportC System reportD Detailed report81Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsB On all chartsC Only on vector chartsD Only on raster charts82How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDISscreen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inPlan mode.D By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inNavi mode.83What is the name of category of charts generated by the user to draw up contingency areas - No Go areas - clearing lines etc.?A Private ChartB Pilot DataC User ChartD Non HO Chart84How do you open the User Chart planning tool?A I select "Planning" and then "User Chart" in the Quick Access bar when in Planmode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navimode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85Can you edit the User Chart when the ECDIS is in Navi mode?A YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.D No86What is a Point in the User Chart?A A point is used to create a Manual Update from a chart object.B A point is used to denote/highlight the position of a chart object with the UserChart.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to another?A NoB >Yes - by using the Backup and Restore dialogue to transfer the Manual Updatesto a USB.C Yes - by sending the Manual updates via an email.D No - but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual Update?A Always when I have to update my charts.B When I receive information which must be displayed on my ECDIS and this is notyet included in the official weekly updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitored?A The name of the route will be displayed on my own ship vector.B The name of the route will be displayed in the Route Information box.C By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitored?A By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inPlan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inNavi mode.D I cannot get information on the route which is being monitored.94 Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check?A Yes - the only thing preventing me from monitoring would be an Impossible Turnmessage in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted Area - CautionArea etc.).95 What should you remember to set up before planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.D The Chart Viewing Dates96 What should you remember to set up first when planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenuC The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been edited?A I don't. The route is automatically saved to the hard disc drive whenever changesare applied.B I click on Save or Save As in the Route Planning tool.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning tool?A I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.D I click on Route in the Quick Access bar.99 Can you open the route planning tool when the ECDIS is in Chart mode?A Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.D No100 Where do you set up the Safety Contour used for planning your route?A On the Parameters tab of the Route Planning tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route plan?A Yes in the Ship and Route parameters of the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another route?A NoB Yes but only if I have two ECDIS.C Yes the route planning function is independent from the route monitoring function.D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring function?A NoB Yes but I must copy it to another ECDIS where it can be edited without interferingwith the monitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the fileon a normal office PC.D Yes if I select Copy from monitor in the Route plan menu and edit the copy. Whencopying is completed I select-Exchange with monitor in the Route Plan menu. 104 Which operation can you perform with the FURUNO ECDIS?A I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.D I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR. 105 Where can you change the setting of the Safety Contour which is used during planning of a route?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart AlertD In the route planning tool.106 Where can you change the settings for the Safety Contour used for monitoring?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?A In Chart AlertB In the route planning tool - on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDIS?A The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS tostart up.C The Kalman Filter is a filter which continuously monitors the status and validityof the navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to theRADAR GPS and AIS.109 Which of these settings generate an alarm from the Chart Alert setting?A Shallow ContourB Safety DepthC Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route Parameters?A Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route Parameters?A Chart alignmentB Safety ContourC Maximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route Parameters?A Position offsetB Safety ContourC Alarm volume。
FURUNO电子海图完整题库
1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading sensor not available3. What does the alert number 495 indicate?A. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init.4. What does the alert number 380 indicate?A. Route: errorB. User chart: foundC. AIS COM errorD. User chart: error5. What does the alert number 635 indicate?A. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate?A. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18.Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesB NameC WarningsD Safety Contour setting30. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33.Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insertthe observation in the Record User Event window.<Cell>b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display onthe GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my settingof Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the chartswhere there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.<Cell>b<Cell>142How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memorydevice.D I can create a User Chart from the Voyage Log and save it to a USB memory device. 44Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an externalstorage.46Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding furtherdetail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51What is a Manual Update?A A Manual update is an update applied using the Manual function in Load && UpdateCharts.B A Manual update is an update to the charts created by the operator from informationreceived from the Pilot - a Navtex message - a VHF broadcast etc.C A Manual update is an update applied to the charts by an official representativeof the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS. 52How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendB In the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No61Can you create a Manual Update from a Navtex Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No62Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63Where can you update the ENCs?A In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue. 66How are regular T&Ps updated on the ECDIS?A T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in theLoad && Update function of the Chart Menu.C Most T&&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.D I cannot update T&&Ps on the FURUNO ECDIS.67How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue. 68How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit the ENC.PMT and then I use the S52 Presentation Libraryfrom the System menu in the Chart Menu to convert the ENCs into SENCs.69What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart72How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information shouldbe displayed.B I select Note as an option for the Tidal Label or Clearing Line where the informationshould be displayed.C I select User Chart from the Main menu and then I select Plan and enter the noteto be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User Chart being used for monitoring?A I move the monitored route plan to planning mode and edit the Linked User Chartsetting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for thedesired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed report77Which printing option is available for the User Chart?A Full reportB System reportC Clearing Line ReportD Detailed report78Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?A Circle ReportB Full reportC System reportD Detailed report80Which printing option is available for the User Chart?A Label ReportB Full reportC System reportD Detailed report81Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsB On all chartsC Only on vector chartsD Only on raster charts82How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDISscreen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inPlan mode.D By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inNavi mode.83What is the name of category of charts generated by the user to draw up contingency areas - No Go areas - clearing lines etc.?A Private ChartB Pilot DataC User ChartD Non HO Chart84How do you open the User Chart planning tool?A I select "Planning" and then "User Chart" in the Quick Access bar when in Planmode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navimode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85Can you edit the User Chart when the ECDIS is in Navi mode?A YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.D No86What is a Point in the User Chart?A A point is used to create a Manual Update from a chart object.B A point is used to denote/highlight the position of a chart object with the UserChart.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to another?A NoB >Yes - by using the Backup and Restore dialogue to transfer the Manual Updatesto a USB.C Yes - by sending the Manual updates via an email.D No - but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual Update?A Always when I have to update my charts.B When I receive information which must be displayed on my ECDIS and this is notyet included in the official weekly updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitored?A The name of the route will be displayed on my own ship vector.B The name of the route will be displayed in the Route Information box.C By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitored?A By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inPlan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inNavi mode.D I cannot get information on the route which is being monitored.94 Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check?A Yes - the only thing preventing me from monitoring would be an Impossible Turnmessage in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted Area - CautionArea etc.).95 What should you remember to set up before planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.D The Chart Viewing Dates96 What should you remember to set up first when planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenuC The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been edited?A I don't. The route is automatically saved to the hard disc drive whenever changesare applied.B I click on Save or Save As in the Route Planning tool.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning tool?A I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.D I click on Route in the Quick Access bar.99 Can you open the route planning tool when the ECDIS is in Chart mode?A Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.D No100 Where do you set up the Safety Contour used for planning your route?A On the Parameters tab of the Route Planning tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route plan?A Yes in the Ship and Route parameters of the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another route?A NoB Yes but only if I have two ECDIS.C Yes the route planning function is independent from the route monitoring function.D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring function?A NoB Yes but I must copy it to another ECDIS where it can be edited without interferingwith the monitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the anormal office PC.D Yes if I select Copy from monitor in the Route plan menu and edit the copy. Whencopying is completed I select-Exchange with monitor in the Route Plan menu. 104 Which operation can you perform with the FURUNO ECDIS?A I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.D I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR. 105 Where can you change the setting of the Safety Contour which is used during planning of a route?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart AlertD In the route planning tool.106 Where can you change the settings for the Safety Contour used for monitoring?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?A In Chart AlertB In the route planning tool - on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDIS?A The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS tostart up.C The Kalman Filter is a filter which continuously monitors the status and validityof the navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to theRADAR GPS and AIS.109 Which of these settings generate an alarm from the Chart Alert setting?A Shallow ContourB Safety DepthC Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route Parameters?A Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route Parameters?A Chart alignmentB Safety ContourC Maximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route Parameters?A Position offsetB Safety ContourC Alarm volume。
FURUNO ECDIS Multiple Choice Test 古野电子海图题库测试题
1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship’s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b. I c an set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft.c. I can set Ship’s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship’s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. (或更换为Details Log)c. I can create a backup copy of Ow n Ship’s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by the operator from information received from the Pilot – a Navtex message – a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chartproducer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDIS and this is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer’s type of ECDIS.13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for danger to navigation and hazardous objects.17. How do you record Own Ship’s position on the ECDIS charts when you have aRange/Bearing observation from your RADAR? ( B )a. I cannot record own ship’s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNO ECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. error精选文档c. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue – it means? ( A )a. License is valid – chart is up-to-dateb. License is valid – chart is NOT up-to-datec. License is available – chart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue – it means? ( C )a. License is valid – chart is up-to-dateb. License is available – chart not installedc. License is valid – up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship’s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check? ( A )a. Yes – the only thing preventing me from monitoring would be an impossible Turn message in the WPT tab.b. Yes – if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour–Restricted Area–Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship’s current position in the Logs? ( D )a. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting? ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent from the route monitoring function.d. Yes but I must select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don’t. The route is automatical ly saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I select “Planning” and then “User Chart” in the Quick Access bar when in Plan mode.b. I select “Planning” and then “User Chart” in the Quick Access bar when in Navi mode.c. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the information sidebar – then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.b. In Chart Display.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart – Route – etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart (或改为monitored route / plannedroute/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated – it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update – only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored.72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Plan mode.b. The name of the route will be displayed in the Status Bar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Sidebar in Navi mode.d. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Plan moded. By clicking on “Route” and then on “Route Info” in the Quick Access Bar when in Navi mode74. How can you tell if your FURUNO ECDIS is displaying an ENC? ( D )a. There is an “ENC Data available” indication in the Own Ship Function Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problems along own ship’s heading line? ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection? ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route? ( D )a. Nowhere – because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS? ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS? ( A )a. In Chart Alertb. In the route planning tool – on the Alerts tabc. In Chart Displayd. No where – it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS? ( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function? ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on a normal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas –No Go areas – clearing lines etc.? ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS? ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor? ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display – User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object (Buoy-Beacon-Berth etc.) on the FURUNO ECDIS? ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter? ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record精选文档menu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart? ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart object with the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts? ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring? ( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I select Monitor for the desired user chart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart? ( A )a. I select Note as an option for the Area Line or Circle where the information should be displayed.b. I select Note as an option for the Tidal Label or Clearing Line where the information should be displayed.c. I select User Chart from the Main menu and then I select Plan and enter the note to be displayed.d. I left click on Route in the Quick Access Bar and then I select Monitor91. What is the recommended loading sequence when you receive new charts-updates and permits? ( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode? ( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. When the software of the FURUNO ECDIS is being updated – it is important that? ( A )a. The software is updated by a FURUNO Service Engineer.b. The software is updated by the Captain.c. The sof tware is updated by the Ship’s Electrical Engineerd. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date精选文档C. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate? DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate? DA. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum changeWhat does the alert number 031 indicate? BA. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout单选题] What does the alert number 640 indicate? BA. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)What does the alert number 635 indicate? AA. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) errorWhat does the alert number 380 indicate? CA. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error单选题] What does the alert number 495 indicate? AA. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init. ErrorWhat does the alert number 450 indicate? DA. Route: Illegal To WPTB. RADAR comm. errorC. LAN adapter version errorD. Heading sensor not available单选题] What does the alert number 820 indicate? CA. AIS lostB. TT lost。
(完整版)FURUNOECDISMultipleChoiceTest古野电子海图题库测试题
1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship 's past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b. I can set the ECDIS to automatically choosing a Safety contour based on my setting of ship maximum draft.c. I can set Ship ' s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship ' s position in the Voyage log automatically.b. I can record a position fix manually by using just one distance and one bearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can send my Route Plan and User Chart to any RADAR for display on the RADAR.b. I can send my Route Plan and User Chart to any AIS for display on the AIS.c. I can send my Route Plan and User Chart to any GPS for display on the GPS.d. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.5. Which operation can you perform during a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details to the past voyage.b. I can create a User Chart from the monitored Route Plan and save it to a USB memory device.c. I can create a backup copy of the Voyage log on a USB memory device.d. I can view and print a copy of the Chart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage? ( B )a. I can use the Event function to record special events in the Details Log.b. I can view and print a copy of the Voyage Log. ( 或更换为Details Log)c. I can create a backup copyof Own Ship ' s past track (120 minutes max.) on a USB memorydevice and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load & Update Charts.b. A Manual Update is an update to the charts created by theoperator from information receivedfrom the Pilot -a Navtex message -a VHF broadcast etc.c. A Manual Update is an update applied to the charts by an official representative of the chartproducer.d. A Manual Update is a chart created using the digitizer function ofthe FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on myECDIS and this is not yetincluded in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. How can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created usingManual Updates.12. Can you copy your Manual Updates from one FURUNO ECDISto another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer theManual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer ' s typ13. Can you create a Manual Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.14. Can you create a Manual Update from an Navtex Messageshown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS create it automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The Conning Display in Installation Parameters.d. The Chart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the route monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for dangerto navigation and hazardous objects.17. How do you record Own Ship ' s position on the ECDIS charts when you have aRange/Bearing observation from your RADAR? ( B )a. I cannot record own ship ' s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the [CTRL] & [ACQ/ACT] button on the Control Unit.d. I select [Record] [Event Log] and [User Event] from the Instant Access bar and insert theobservation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. I use my paper Logbook as documentation.b. I use my paper Logbook and my VDR or SVDR as documentation.c. I use the tracking function in the symbol display.d. I show a playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNOECDIS? ( B )a. In the Chart Legend.b. In the Manual Update Window.c. In the Chart Catalogue.d. In the Chart Display menu.20. Which color scheme is used for Manual update on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tracked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indicate? (A)a. No official datab. Log errorc. Dual axis log (WT) errord. Dual axis log (BT) error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display29. Where do you set the Shallow Pattern? ( C )a. In Chart Displayb. In Symbol Displayc. In Basic Settingd. In chart catalogue30. Where do you set the Deep Contour? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Alertd. In Chart Display31. Where do you control the AIO? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue -it means? ( A )a. License is valid -chart is up-to-dateb. License is valid -chart is NOT up-to-datec. Lice nse is available -chart not in stalledd. License is not available or has expired33. Whe n an ENC is outli ned in Yellow in the Chart Catalogue -it mea ns? ( C )a. License is valid -chart is up-to-dateb. Lice nse is available -chart not in stalledc. License is valid -up-to-date status doubtfuld. License is not available or has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C )a. Edition numberb. Last displayed updatec. Edition dated. Update issue date36. Which information can you find in the Raster Chart Legend? ( B )a. Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger Targets Logb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority of multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and Route Parametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue of the Menuc. In the About dialogued. In the S52 Presentation Library42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship ' s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Report44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manual Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Optimization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check? ( A )a. Yes —the only thi ng preve nting me from mon itori ng would bean impossible Turn message in the WPT tab.b. Yes —if I enter the Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour—Restricted Area—Caution Area etc.)48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship 's current position in the L)ogs? ( Da. By opening the Voyage Log and entering the current position.b. By right clicking on own ship icon on the user interface.c. By pressing the Record button on the Control Unit..d. By using the record position event function of the Event Log.50. How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so byNotice To Mariners? (或改为a Navtex message / information received via VHF broadcast) ( B )a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use the Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting? ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes the route planning function is independent fromthe routemonitoring function.d. Yes but I must select the same Safety Contour for both r outeplans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don 'tte. Tishaeurt o umatically saved to the hard disc drive whenever changes are applied.b. I click on Save or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calculate an astronomical position from several astronomical observationsentered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Update CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is switched on or off in the Sensor menu on the Position tab.d. The Kalman filter is switched on when steering is switched toAutopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the information on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User Chart planning tool? ( A )a. I select “ Planning ” and then “ User Chart ” in the Quick Access bar when in Plan mode.b. I select “ Planning ” and then “ User Chart ” in the Quick Access bar when in Navi modc. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the in formati on sidebar —the n I select Pla n.59. Where do you select the color Palette used to display the charts? ( C )a. In Chart Legend.b. In Chart Display.c. In Quick Access Bar.d. In Chart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Basic Setting61. Where do you control the visibility of the user overlays (User Chart —Route —etc.)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-1. Where do you change the visibility of your User Chart ( 或改为monitored route / planned route/circles)? ( B )a. In Chart Legendb. In Symbol Displayc. In Chart Displayd. In Chart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In the Chart Manager (Individual Update).b. In the Update function of chart displayc. In the Update function of the System settings.d. In the Update function of the Chart Legend.65. How can you reset the odometer? ( A )a. I can reset the odometer from the Voyage tab of the Menu.b. I can reset the odometer from the Sensor setting dialogue.c. I can reset the odometer from the Symbol Display dialogue.d. I can reset the odometer from the Quick Access sidebar.66. When the software of the FURUNO ECDIS is being updated -it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67. What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS? ( D )a. In the Voyage Log.b. In the Pilot Data.c. In the User Event function.d. In the User Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you modify an existing Manual Update object? ( D )a. I use the ENC tab of the Chart maintenance function.b. I use the Mainer tab of the Symbol Display function.c. I cannot modify a Manual Update -only delete it.d. I use the List tab of manual Update tool function.71. Where do you find information on the presentation library used in the FURUNO ECDIS? ( D )a. In the Basic Setting of the Menu.b. In the Record function of the Quick Access bar.c. In the System dialogue of the Menud. In the About dialogue72-1. How can you verify which route is being monitored? ( B )a. The name of the route will be displayed on my own ship vector.b. The name of the route will be displayed in the Route Information box.c. By right clicking on own ship icon.d. I cannot get information on the route which is being monitored. 72-2. How can you verify which route is being monitored? ( C )a. By clicking on “Route”and then on “Route Info ”in the Quick Access Sidebar in Plab. The name of the route will be displayed in the Status Bar.c. By clicking on “Route”and then on “Route Info ”in the Quick Access Sidebar in Nad. I cannot get information on the route which is being monitored.73. How can you verify which User Chart is being monitored? ( D )a. The name of the User Chart will be displayed in the top right corner of the ECDIS screen.b. The name of the User Chart will be displayed in the information sidebar.c. By clicking on “Route” and then onQ“uicRkoAutceceInsfso Bar”whinenthien Plan moded. By clicking on “Route” and then on“Route Info ” in the Quick Access Bar when in Nmode74. How can you tell if your FURUNO ECDIS is displaying an ENC? ( D )a. There is an “ENC Data avaitliaobnleinthe”Owi n dSichaip Function Box.b. There is an “RNC Data” indication in the Own Ship Function Box.c. The FURUNO ECDIS will give an audible alarm if I am notviewing an ENC.d. There is no special indication in the Own Ship Function Box.75. Where do you set up the chart watch sector to scan the ENCs for problems along own ship heading line? ( D )a. In Chart Display settingsb. In Chart Alert settingsc. In Basic settings.d. In Check Area settings.76. Which Manual Update objects can be hiden from view by operator selection? ( B )a. Only the Manual Updates Special Areas (from the Chart Display dialogue)b. All Manual Updates objects (from the Chart Display dialogue)c. Only the Manual Updates Buoys (from the Chart Display dialogue)d. Only the Manual Updates Soundings (from the Chart Display dialogue)77. Where can you change the setting of the Safety Contour which is used during planning of a route?( D )a. Nowhere -because I must never change the setting for the Safety Contour.b. In the Settings menu and I can only change the setting if I have the service passwordc. In chart alertd. In the route planning tool78. Where do you offset own ship chart position on the FURUNO ECDIS? ( D )a. In symbol displayb. In chart displayc. In chart menud. In own ship function box79. Where do you control the Safety Contour displayed on the charts on FURUNO ECDIS? ( A )a. In Chart Alertb. In the route planning tool -on the Alerts tabc. In Chart Displayd. No where -it is set up automatically80. Where do you find information on magnetic Variation in the ENCs on the FURUNO ECDIS?( D )a. In Chart Displayb. In Chart Cataloguec. In Chart Alertd. In Chart Legend81. Can you edit a route without removing it from the route monitoring function? ( A )a. Nob. Yes but I must copy it to another ECDIS where it can be edited without interfering with the monitoring function of the FURUNO ECDIS.c. Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on a normal office PCd. Yes if I select copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan Menu82. What is the name of category of charts generated by the user to draw up contingency areas-NoGo areas -clearing lines etc.? ( C )a. Private Chartb. Pilot Datac. User Chartd. Non HO Chart83. Where can you display your planned or monitored User Charts on the FURUNO ECDIS? ( B )a. Only on official chartsb. On all chartsc. Only on vector chartsd. Only on raster charts84. How do you select which User Chart to monitor? ( A )a. By linking it to the monitored Route Plan in the route planning tool.b. By clicking Display -User Chart in the Quick Access Bar.c. By right clicking on the chart area.d. By left clicking on the chart area.85. How do you get information on an ENC object(Buoy-Beacon-Berth etc.) on the FURUNO ECDIS? ( C )a. I right click on the User Chart function in the route planning tool.b. I click on the Chart Info in the Instant Access Bar.c. I center click on the object.d. I right click on the object.86. How can you reset the trip counter? ( B )a. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record menu.b. I can reset the Trip Counter by resetting the Voyage tab of the Menu.c. I cannot reset the Trip Counter.d. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue.87. What is a Point in the User Chart? ( B )a. A point is used to create a Manual Update from a chart object.b. A point is used to denote/highlight the position of a chart object with the User Chart.c. A point is the end of a User Chart.d. A point is used to connect the User Chart with a route plan.88. Where do you switch between Multicolor and Two Color setting for the charts? ( C )a. In Chart Legend.b. In Symbol Display.c. In Basic Settingd. In Chart Display89. How do you change the User Chart being used for monitoring?( A )a. I move the monitored route plan to planning mode and edit the Linked User Chart setting.b. I select a different user chart from the Menu to monitor.c. I select User Chart from the planning sidebar and then I select Monitor for the desired user chart.d. I left click on User Chart in the Status Bar and then I select Plan.90. How do you enter information notes in the User Chart? ( A )a. I select Note as an option for the Area Line or Circle where the information should be displayed.b. I select Note as an option for the Tidal Label or Clearing Linewhere the information should be displayed.c. I select User Chart from the Main menu and then I select Planand enter the note to be displayed.d. I left click on Route in the Quick Access Bar and then I selectMonitor91. What is the recommended loading sequence when you receivenew charts-updates and permits? ( D )a. There is no recommended sequence.b. #1:Base CDs#2: Update CD #3: Permitc. #1: Permit #2: Update CD #3: Base CDsd. #1: Permit #2: Base CDs #3: Update CD92. Can you edit the User Chart when the ECDIS is in Navi mode?( D )a. Yesb. Only if the User Chart is not linked to a route plan.c. Yes if the User Chart contains no tidal information.d. No.93. Whe n the software of the FURUNO ECDIS is bei ng updated —itis importa nt that? ( A )a. The software is updated by a FURUNO ServiceEngineer.b. The software is updated by the Captain.c. The software is updated by the Ship 's Electrical End. The software is updated by an IMO representative.When an ENC is outlined in Magenta in the Chart Catalogue - it means? CA. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.What does the alert number 257 indicate? DA. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM errorWhat does the alert number 470 indicate? D。
FURUNO ECDIS Multiple Choice Test 古野电子海图题库测试题
1。
Which operation can you perform on the FURUNO ECDIS？（ B ）a. I can play back my ship’s past track on the ECDISb。
I can record my position manually on the RNCs。
c. I can create Notes from my Voyage Log to document a voyage on the charts.d。
I can set the ECDIS to include engine log information into the Voyage Log automatically. 2。
Which operation can you perform on the FURUNO ECDIS? （ A ）a。
I can record my position manually on the ENCs。
b. I c an set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft。
c。
I can set Ship's maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft。
d。
I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? （ C ）a。
FURUNO-电子海图-完整题库
1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading sensor not available3. What does the alert number 495 indicate?A. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init.4. What does the alert number 380 indicate?A. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate?A. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate?A. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18.Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesB NameC WarningsD Safety Contour setting30. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33.Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insertthe observation in the Record User Event window.<Cell>b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display onthe GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my settingof Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the chartswhere there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.<Cell>b<Cell>142How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memorydevice.D I can create a User Chart from the Voyage Log and save it to a USB memory device. 44Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an externalstorage.46Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding furtherdetail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51What is a Manual Update?A A Manual update is an update applied using the Manual function in Load && UpdateCharts.B A Manual update is an update to the charts created by the operator from informationreceived from the Pilot - a Navtex message - a VHF broadcast etc.C A Manual update is an update applied to the charts by an official representativeof the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS. 52How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the File Export tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendB In the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No61Can you create a Manual Update from a Navtex Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No62Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63Where can you update the ENCs?A In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue. 66How are regular T&Ps updated on the ECDIS?A T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in theLoad && Update function of the Chart Menu.C Most T&&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.D I cannot update T&&Ps on the FURUNO ECDIS.67How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue. 68How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file using the file named ENC.PMT and then I use the S52Presentation Library from the System menu in the Chart Menu to convert the ENCsinto SENCs.69What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart72How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information shouldbe displayed.B I select Note as an option for the Tidal Label or Clearing Line where the informationshould be displayed.C I select User Chart from the Main menu and then I select Plan and enter the noteto be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User Chart being used for monitoring?A I move the monitored route plan to planning mode and edit the Linked User Chartsetting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for thedesired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed report77Which printing option is available for the User Chart?A Full reportB System reportC Clearing Line ReportD Detailed report78Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?A Circle ReportB Full reportC System reportD Detailed report80Which printing option is available for the User Chart?A Label ReportB Full reportC System reportD Detailed report81Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsB On all chartsC Only on vector chartsD Only on raster charts82How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDISscreen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inPlan mode.D By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inNavi mode.83What is the name of category of charts generated by the user to draw up contingency areas - No Go areas - clearing lines etc.?A Private ChartB Pilot DataC User ChartD Non HO Chart84How do you open the User Chart planning tool?A I select "Planning" and then "User Chart" in the Quick Access bar when in Planmode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navimode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85Can you edit the User Chart when the ECDIS is in Navi mode?A YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.D No86What is a Point in the User Chart?A A point is used to create a Manual Update from a chart object.B A point is used to denote/highlight the position of a chart object with the UserChart.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to another?A NoB >Yes - by using the Backup and Restore dialogue to transfer the Manual Updatesto a USB.C Yes - by sending the Manual updates via an email.D No - but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual Update?A Always when I have to update my charts.B When I receive information which must be displayed on my ECDIS and this is notyet included in the official weekly updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitored?A The name of the route will be displayed on my own ship vector.B The name of the route will be displayed in the Route Information box.C By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitored?A By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inPlan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inNavi mode.D I cannot get information on the route which is being monitored.94 Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check?A Yes - the only thing preventing me from monitoring would be an Impossible Turnmessage in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted Area - CautionArea etc.).95 What should you remember to set up before planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.D The Chart Viewing Dates96 What should you remember to set up first when planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenuC The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been edited?A I don't. The route is automatically saved to the hard disc drive whenever changesare applied.B I click on Save or Save As in the Route Planning tool.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning tool?A I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.D I click on Route in the Quick Access bar.99 Can you open the route planning tool when the ECDIS is in Chart mode?A Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.D No100 Where do you set up the Safety Contour used for planning your route?A On the Parameters tab of the Route Planning tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route plan?A Yes in the Ship and Route parameters of the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another route?A NoB Yes but only if I have two ECDIS.C Yes the route planning function is independent from the route monitoring function.D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring function?A NoB Yes but I must copy it to another ECDIS where it can be edited without interferingwith the monitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the fileon a normal office PC.D Yes if I select Copy from monitor in the Route plan menu and edit the copy. Whencopying is completed I select-Exchange with monitor in the Route Plan menu. 104 Which operation can you perform with the FURUNO ECDIS?A I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.D I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR.105 Where can you change the setting of the Safety Contour which is used during planning of a route?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart AlertD In the route planning tool.106 Where can you change the settings for the Safety Contour used for monitoring?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?A In Chart AlertB In the route planning tool - on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDIS?A The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS tostart up.C The Kalman Filter is a filter which continuously monitors the status and validityof the navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to theRADAR GPS and AIS.109 Which of these settings generate an alarm from the Chart Alert setting?A Shallow ContourB Safety DepthC Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route Parameters?A Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route Parameters?A Chart alignmentB Safety ContourC Maximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route Parameters?A Position offsetB Safety ContourC Alarm volumeD Ship's maximum speed。
FURUNO 电子海图 完整题库
1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading sensor not available3. What does the alert number 495 indicate?A. Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: Init.4. What does the alert number 380 indicate?A. Route: errorB. User chart: foundC. AIS COM errorD. User chart: error5. What does the alert number 635 indicate?A. No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchB. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate?A. WGS 84 not usedB. Different geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18.Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. When an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available" indication in the Own Ship Functions Box.B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart CatalogueC In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesB NameC WarningsD Safety Contour setting30. Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&&P Notice32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33.Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Status Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insertthe observation in the Record User Event window.<Cell>b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display onthe GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my settingof Ship's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the chartswhere there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.<Cell>b<Cell>142How do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memorydevice.D I can create a User Chart from the Voyage Log and save it to a USB memory device. 44Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an externalstorage.46Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding furtherdetail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of the Chart Usage Log.47Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogD Details Log50How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using the record position event function of the Event Log.51What is a Manual Update?A A Manual update is an update applied using the Manual function in Load && UpdateCharts.B A Manual update is an update to the charts created by the operator from informationreceived from the Pilot - a Navtex message - a VHF broadcast etc.C A Manual update is an update applied to the charts by an official representativeof the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS. 52How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendB In the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option from the Symbol Display dialogue.59Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No61Can you create a Manual Update from a Navtex Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.D No62Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63Where can you update the ENCs?A In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue. 66How are regular T&Ps updated on the ECDIS?A T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in theLoad && Update function of the Chart Menu.C Most T&&Ps are included in the weekly update CD and these are updated automaticallytogether with the other updates on the CD.D I cannot update T&&Ps on the FURUNO ECDIS.67How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue. 68How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit the ENC.PMT and then I use the S52 Presentation Libraryfrom the System menu in the Chart Menu to convert the ENCs into SENCs.69What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart72How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information shouldbe displayed.B I select Note as an option for the Tidal Label or Clearing Line where the informationshould be displayed.C I select User Chart from the Main menu and then I select Plan and enter the noteto be displayed.D I left click on Route in the Quick Access Bar and then I select Monitor.73How do you change the User Chart being used for monitoring?A I move the monitored route plan to planning mode and edit the Linked User Chartsetting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for thedesired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed report77Which printing option is available for the User Chart?A Full reportB System reportC Clearing Line ReportD Detailed report78Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?A Circle ReportB Full reportC System reportD Detailed report80Which printing option is available for the User Chart?A Label ReportB Full reportC System reportD Detailed report81Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsB On all chartsC Only on vector chartsD Only on raster charts82How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDISscreen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inPlan mode.D By clicking on "Route" and then on "Route Info" in the Quick Access Bar when inNavi mode.83What is the name of category of charts generated by the user to draw up contingency areas - No Go areas - clearing lines etc.?A Private ChartB Pilot DataC User ChartD Non HO Chart84How do you open the User Chart planning tool?A I select "Planning" and then "User Chart" in the Quick Access bar when in Planmode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navimode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85Can you edit the User Chart when the ECDIS is in Navi mode?A YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.D No86What is a Point in the User Chart?A A point is used to create a Manual Update from a chart object.B A point is used to denote/highlight the position of a chart object with the UserChart.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to another?A NoB >Yes - by using the Backup and Restore dialogue to transfer the Manual Updatesto a USB.C Yes - by sending the Manual updates via an email.D No - but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual Update?A Always when I have to update my charts.B When I receive information which must be displayed on my ECDIS and this is notyet included in the official weekly updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.B I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitored?A The name of the route will be displayed on my own ship vector.B The name of the route will be displayed in the Route Information box.C By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitored?A By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inPlan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar inNavi mode.D I cannot get information on the route which is being monitored.94 Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check?A Yes - the only thing preventing me from monitoring would be an Impossible Turnmessage in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted Area - CautionArea etc.).95 What should you remember to set up before planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.D The Chart Viewing Dates96 What should you remember to set up first when planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenuC The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been edited?A I don't. The route is automatically saved to the hard disc drive whenever changesare applied.B I click on Save or Save As in the Route Planning tool.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning tool?A I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.D I click on Route in the Quick Access bar.99 Can you open the route planning tool when the ECDIS is in Chart mode?A Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.D No100 Where do you set up the Safety Contour used for planning your route?A On the Parameters tab of the Route Planning tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route plan?A Yes in the Ship and Route parameters of the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another route?A NoB Yes but only if I have two ECDIS.C Yes the route planning function is independent from the route monitoring function.D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring function?A NoB Yes but I must copy it to another ECDIS where it can be edited without interferingwith the monitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the anormal office PC.D Yes if I select Copy from monitor in the Route plan menu and edit the copy. Whencopying is completed I select-Exchange with monitor in the Route Plan menu. 104 Which operation can you perform with the FURUNO ECDIS?A I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.D I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR. 105 Where can you change the setting of the Safety Contour which is used during planning of a route?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart AlertD In the route planning tool.106 Where can you change the settings for the Safety Contour used for monitoring?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?A In Chart AlertB In the route planning tool - on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDIS?A The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS tostart up.C The Kalman Filter is a filter which continuously monitors the status and validityof the navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to theRADAR GPS and AIS.109 Which of these settings generate an alarm from the Chart Alert setting?A Shallow ContourB Safety DepthC Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route Parameters?A Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route Parameters?A Chart alignmentB Safety ContourC Maximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route Parameters?A Position offsetB Safety ContourC Alarm volume。
FURUNO ECDIS Multiple Choice Test 古野电子海图题库测试题
1。
Which operation can you perform on the FURUNO ECDIS？（ B )a。
I can play back my ship's past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts。
d. I can set the ECDIS to include engine log information into the Voyage Log automatically. 2。
Which operation can you perform on the FURUNO ECDIS? （ A )a. I can record my position manually on the ENCs.b. I c an set the ECDIS to automatically choosing a Safety contour based on my setting of ship’s maximum draft。
c。
I can set Ship’s maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft。
d。
I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS？ ( C )a。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
1. What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. ErrorC. LAN adapter version errorD. Heading ensor not available3. What does the alert number 495 indicate?'• Anchor watch errorB. Track control stoppedC. Steering parameter errorD. Filter: I nit.4. What does the alert number 380 indicate?A. Route: File read errorB. User chart: File not foundl AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate?A No official dataB. Log errorC. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatchChart align: Over 30 mtrtC. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutSensor adapter 2 COt.1 timeoirtC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlGyro 3 COM error9. What does the alert number 470 indicate?10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB In Symbol DisplayIn Chart Display*D. In Basic Setting11. Where do you set the Safety Depth?A. In Chart LegendB. In Symbol DisplayIn Chart AlertD. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol Display f In Chart AlertD. In Chart Display13 Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayIn Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart LegendB. In Symbol Display i In Chart AlertD. In Chart Display15 Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayIn Basic SettingD. In Chart Catalogue16 Where do you control the AIO?A. In Chart LegendB. In Symbol Display i In Chart DisplayD. In Chart Catalogue17.Where do you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayIn Quick Access BarD. In Chart Catalogue18 Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayIn Basic SettingD. In Chart Display19 When an ENC is outlined in Green in the Chart Catalogue - it means?H Licence is valid chart i up to-date.B. License is valid • chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20 When an ENC is outlined in Orange in the Chart Catalogue ・ it means?A. License is valid - chart is up-to-date.License is valid • chart ■ NOT up-to-date.C. License is available • chart not installed.D. Cancelled chart.21 When an ENC is outlined in Magenta in the Chart Catalogue ・ it means?A. License is valid ・ chart is up-to-date.B. License is valid • chart is NOT up-to-dateC License is available chart not installedD. License is valid • up-to-date status doubtful.22 When an ENC is outlined in Yellow in the Chart Catalogue ・ it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C License is valid up-to-date dtatu： doubtful.D. License is not available or has expired.23 When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available ・ chart not installed.C. License is valid - up-to-date status doubtful.I License is not available or has expired24 When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid • chart is NOT up-to-date.C. License is available • chart not installed.L Cancelled chart.25 Where can you find information concerning the charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.c. mmmmD. In the Chart Display menu.26 How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an "ENC Data available I* indication in the Own Ship Functions Box.D I select RNC in the Chart Catalogue.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage logautomatically.<Cell>b<Cell>l42 How do you document your previous voyage on the FURUNO ECDIS?B. There is an "RNC data" indication in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.B Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49 Which recording function is available in the FURUNO ECDIS?A Gyro LogB Engine LogC Ship's LogDetails Log50 How do you manually record Own Ship's current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.I deselect that general type of chart object in the Chart Display dialogue.D I cannot update T&&Ps on the FURUNO ECDIS.67 How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A. In Chart DisplayB In Chart CatalogueC In Chart AlertIn Chart Legend28 Which information can you find in the Vector Chart Legend?Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&&P NoticesC WarningsD Safety Contour setting30 Which information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberChart edition && Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataI ' T&&P Notice32. Which information can you find in the Raster Chart Legend?♦ Honzont.)l datumB Safety DepthC User Permit numberD License number33. Which information can you find in the Raster Chart Legend?A Shallow Contouri Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Raster Chart Legend?A Edition numberB Last displayed update-Edition dateD Update issue date35 How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.I select Raster chart from the drop down li c t in the Status Bar.36 How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.I select Vector chart from the drop down list in the Stdtus Bar.D I select Vector chart in the Chart Catalogue.37.How do you get information on an ENC object (Buoy - Beacon ・ Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.I I right click on the object.38 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ship's position manually on the FURUNO ECDIS.I record LOP in the Record function of the Event Log.C I press the [CTRL] && [ACQ/ACT] button on the Control Unit.D I select [Record][Event Log] and [User Event] from the Instant Access bar and insert theobservation in the Record User Event window.<Cell>b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ship's positions in the Voyage log automatically.B I can record a position fix manually by using just one distance and one bearing.I can playback my past voyage track on the charts,D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on theGPS.40 Which operation can you perform on the FURUNO ECDIS?:I can record my portion manually on the LNCs.B I can set the ECDIS to automatically choosing a Safety Contour based on my setting ofShip's maximum draft.C I can set Ship's maximum height to enable chart alerts from areas in the charts where thereis not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41 Which operation can you perform on the FURUNO ECDIS?A I can play back my ship's past track on the ECDIS.I can record my poiition manually on the RNCs.! I show a playback of my past voyage track on the charts.43 Which operation can you perform during a voyage?4 I can use the Event function to record special events in the Event Log;B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memory device.D I can create a User Chart from the Voyage Log and save it to a USB memory device.44 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ship's past track (120 minutes max.) on a USBmemory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record special events in the Voyage Log.B I can create and save a screen shot for future reference..I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an external storage.46 Which operation can you perform after completion of a voyage?A I can add additional records of manual positions to the Voyage Log adding further detail tothe past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memorydevice.C I can create a backup copy of the Voyage log on a USB memory device.I can view and print a copy of the Chart Usage Log.47 Which recording function is available in the FURUNO ECDIS?Danqer Targets l og! ■ By u.ing the record position event function of the Event Log.51 What is a Manual Update?A A Manual update is an update applied using the Manual function in Load && Update Charts.i A Manual update is an update to the charts created by the operator from information receivedfrom the Pilot ・ a Navtex message a VHF broadcast etc-C A Manual update is an update applied to the charts by an official representative of the chartproducer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.52 How do you delete a specific object added using the Manual Update function?A I select Clear in the Manual Update window.B I use the Delete function in the File Export tool.I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53 How do you modify an existing Manual Update object?A I use the ENC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.I use the List tab of Manual Update tool function.54 How can you see if a chart object is created using Manual Updates?A The Manual Update will be larger than any other chart objects.B It is always shown in red.It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55 Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsI Standard EtJC symbolsC Orange ENC symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsL On all typet of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendIn the Manual Update WindowC In the Chart CatalogueD In the Chart Display menu58 How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.D I deselect the option from the Symbol Display dialogue.59 Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes , by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.DNo61 Can you create a Manual Update from a Navtex Message shown on the ECDIS?♦Yes • by manually creating the object.B Yes • by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automatically.DNo62 Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63 Where can you update the ENCs?In the ( hart Manager ilndividual Update；B In the Update function of the Chart DisplayC In the Update function of the System SettingsD In the Update function of the Chart Legend64 Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuIn the Ch.irt r>1anaqer Jndrvidual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65 How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?I use the Autoload function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue.66 How are regular T&Ps updated on the ECDIS?A T&&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&&Ps using the Manual function in the Load &&Update function of the Chart Menu.Most T&&Ps are included in the weekly update CD and these are updated dutomatically together with the other updates on the CD.I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information using the Chart Details function in the Chart Catalogue.68 How are loaded ENCs converted into SENCs when updating?The I URUfJO LCDIS will normally convert the LfJCi to SEI K s automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file using the file named ENC.PMT and then I use the S52Presentation Library from the System menu in the Chart Menu to convert the ENCs intoSENCs.69 What is the recommended loading sequence when you receive new charts • updates and permits?A There is no recommended sequence.B #l:Base CDs #2:Update CD #3:PermitC #l:Permit #2:Update CD #3:Base CDsL PPermtt e CDs --3 Update CD70 How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71 Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionI In the User Chart72 How do you enter informative notes in the User Chart?A I select Note as an option for the Area Line or Circle where the information should bedisplayed.B I select Note as an option for the Tidal Label or Clearing Line where the information shouldbe displayed.C I select User Chart from the Main menu and then I select Plan and enter the note to beB I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar and then I select Monitor for the desired userchart.D I left click on User Chart in the Status Bar and then I select Plan.74 Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.1- Yes by u：ing the Export/lmport tool in the Settings function of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75 Which printing option is available for the User Chart?■ Tidal ReportB Full reportC System reportD Detailed report76 Which printing option is available for the User Chart?A Full reportUne ReportC System reportD Detailed report77 Which printing option is available for the User Chart?A Full reportB System report.Clearina Line ReportD Detailed report78 Which printing option is available for the User Chart?A Full reportB System reportC Detailed reportD Area Report79 Which printing option is available for the User Chart?, Circle ReportB Full reportC System reportD Detailed report80 Which printing option is available for the User Chart?Label ReportB Full reportC System reportD Detailed report81 Where can you display your planned or monitored User Chart on the FURUNO ECDIS?A Only on official chartsI On all chartsC Only on vector chartsD Only on raster charts82 How can you verify which User Chart is being monitored?A The name of the User Chart will be displayed in the top right corner of the ECDIS screen.B The name of the User Chart will be displayed in the Information Sidebar.C By clicking on "Route" and then on "Route Info" in the Quick Access Bar when in Planmode.By clicking on and then on "Route Info" in the Quick Access Bar when hi hfawi83 What is the name of category of charts generated by the user to draw up contingency areas ・No Go areas - clearing lines etc.?A Private ChartB Pilot Data♦ User ChartD Non HO Chart84 How do you open the User Chart planning tool?A I select "Planning" and then "User Chart" in the Quick Access bar when in Plan mode.B I select "Planning" and then "User Chart" in the Quick Access bar when in Navi mode.C I Select Manual Update from the Menu in Charts mode.D I left click on User Chart in the Information sidebar - then I select Plan.85 Can you edit the User Chart when the ECDIS is in Navi mode?A YesB Only if the User Chart is not linked to a route plan.C Yes if the User Chart contains no Tidal information.A A point is used to create a Manual Update from a chart object.3 A point u$edto denote/hiphlight the position of ■chart object with tlw U”r Chait.C A point is the end of a User Chart.D A point is used to connect the User Chart with a route plan.87 Can you copy your Manual Updates from one FURUNO ECDIS to another?B >Yes - by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.C Yes - by sending the Manual updates via an email.D No ・ but I can transfer them to another manufacturer's type of ECDIS.88 When do you use a Manual Update?A Always when I have to update my charts.! When I receive information which must be displayed on my ECDIS and this is not yet induded in the official ■■■■♦/ updates.C I should never use Manual Updates.D >When I have to update the software of the ECDIS.89 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?A I cannot add any chart objects to the ECDIS unless they are included in the weekly updateCDs.I use the Manual Update，function.C I use the User Chart function.D I use the Chart Edit function.90 How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?A I cannot add any chart objects to the ECDIS unless they are included in the weeklyupdate CDs.I use the nual Updates function.C I use the User Chart function.D I use the Chart Edit function.91 How do you add navigational chart objects to the FURUNO ECDIS when you are required to doso by information received via VHF broadcast?A I cannot add any chart objects to the ECDIS unless they are included in the weekly updateCDs.I use the Manual Updates function.C I use the User Chart function.D I use the Chart Edit function.92 How can you verify which route is being monitored?A The name of the route will be displayed on my own ship vector.L The name of the route will be displayed in the Route Information boxC By right clicking on own ship icon.D I cannot get information on the route which is being monitored.93 How can you verify which route is being monitored?A By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar in Plan mode.B The name of the route will be displayed in the Status Bar.C By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar in Navi mode.D I cannot get information on the route which is being monitored.&4 Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check?Yes • the only thing preventing me from monitorina would be an Impossible Turn message in the WPT tab.B Yes - if I enter the Service Safety Password.C NoD It depends on the type of Alert generated (Safety Contour - Restricted Area ・ Caution Areaetc.).95 What should you remember to set up before planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu.C The Conning Display in Installation Parameters.:The Chart Viewing Dates96 What should you remember to set up first when planning a route?A The settings for the Voyage LogB The Alarm Level in the Operation submenu1 The Safety Contour in the route planning toolD The Radar overlay97 How do you save your route to the Hard Disc Drive when it has been edited?A I don't. The route is automatically saved to the hard disc drive whenever changes areapplied.C I select Save in the Backup and Restore dialogue.D I click New in the Route Planning tool.98 How do you start the route planning tool?A I press Plan on the Control Unit.B I click on the Route icon in the Status bar.C I select Route Plan from the Menu dialogue.I click on Route in the Quick Access bar.99 Can you open the route planning tool when the ECDIS is in Chart mode?A Yes if I open the Menu dialogue first.B Yes if I right click on the chart and select Event.C Yes if I select Plan in the Chart Catalogue.100 Where do you set up the Safety Contour used for planning your route?八On the Parameter^ tab of the Route Pldnnina tool.B In Chart DisplayC In Chart Alert settingsD In Own Ship settings101 Can you set the overall maximum speed for a route plan?, Ye： in the Ship and Route parameters ot the Menu.B Yes in Chart Display.C Yes in Optimization parameters.D Yes in the route planning tool.102 Can you plan a route while you monitor another route?A NoB Yes but only if I have two ECDIS.(Yes the route planning function is independent from the route monitoring function. D Yes but I must select the same Safety Contour for both route plans.103 Can you edit a route without removing it from the route monitoring function?B Yes but I must copy it to another ECDIS where it can be edited without interfering with themonitoring function of the FURUNO ECDIS.C Yes if I create a copy of the route plan in ANTS format on a USB and edit the file on anormal office PC.D Yes if I select Copy from monitor in the Route plan menu and edit the copy. When copying iscompleted I select-Exchange with monitor in the Route Plan menu.104 Which operation can you perform with the FURUNO ECDIS?A I can send my Route Plan and User Chart to any RADAR for display on the RADAR.B I can send my Route Plan and User Chart to any AIS for display on the AIS.C I can send my Route Plan and User Chart to any GPS for display on the GPS.I can send my Route Plan and User Chart to a FURUNO RADAR for display on the105 Where can you change the setting of the Safety Contour which is used during planning of a route?A Nowhere - because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.C InChart AlertI. In the route plannmq tool.106 Where can you change the settings for the Safety Contour used for monitoring?A Nowhere ・ because I must never change the setting for the Safety Contour.B In the Settings menu and I can only change the setting if I have the service password.i In Chart Alert.D In the route planning tool.107 Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS?In Chart AlertB In the route planning tool ・ on the Alerts tabC In Chart DisplayD No where - it is set up automatically108 What is Kalman filter in the FURUNO ECDIS?A The Kalman Filter is a noise filter which improves the precision of the charts.B The Kalman filter is a filter which reduces the time it takes for the ECDIS to start up.C Th痛Kalman Filter is 制fiiter which continuouwly monitor the and validity of th,navigation sensor inputs.D The Kalman Filter is a filter which continuously monitors the connection to the RADAR GPSand AIS.109 Which of these settings generate an alarm from the Chart Alert setting?A Shallow ContourB Safety Depthf. Safety ContourD Deep Contour110 Which ECDIS setting is activated in Ship and Route Parameters?♦ Gyro ErrorB Safety ContourC Notes alarm timesD Ship's minimum speed111 Which ECDIS setting is adjusted in Ship and Route Parameters?A Chart alignmentB Safety ContourMaximum rate of turnD Safety depth112 Which ECDIS setting is adjusted in Ship and Route Parameters?A Position offsetB Safety ContourC Alarm volumeI Ship*s maximum speed113 Where do you set up the chart watch sector to scan the ENCs for problems along own ship's heading line?A In Chart Display settingsB In Chart Alert settingsC In Basic settingsIn Check Area settmq?114 What is the maximum limit of the Check Area?A No limitI 240min , 20NM ♦ 5km ♦ 999mC 120min. + 10NM + 3km + 500mD <Cell>999min. + 999NM + 999km + 999m115 What should you do if you have to leave your planned route during a voyage?A Switch off the FURUNO ECDIS and concentrate on the RADAR.B Disable the route monitoring on the FURUNO ECDIS.。