晋中学院英文翻译资料模板
参考--学院翻译(英文)原稿
Message from BUU AdministratorsTime and tide has witnessed the birth and growth of BUU, a comprehensive university founded in 1985 with the approval of the Ministry of Education, P. R. China. The University originated from the branch schools established in 1978 upon over 30 major universities in Beijing, including prestigious Peking University and Tsinghua University.Over the past three decades, nourished in the miraculous atmosphere of the Capital, BUU has been cherishing fine traditions of esteemed universities and carrying forward the school motto of “Leaning for Application”, thus distinguishing itself with a spirit and a striking feature of its own. BUU, home to over 170,000 graduates –a remarkable achievement made in the process of popularization of higher education in the Capital, has contributed greatly to social, cultural and economic development of Beijing.Immersed in academic excellence, harmony of the society, and the unique warmth of our best times, BUU will persistently strive forward for the development into a highly qualified university of applied learning to the satisfaction of the people in the Capital.To all both at home and abroad who are interested in studying at BUU, we are pleased to have you over for the exploration in the sea of knowledge to your heart‟s content; to all professionally and academically competent and talent who are interested in pursuing career development at BUU, we welcome you to join us for greater accomplishments on this broad stage.Beijing Union University: An OverviewBeijing Union University (BUU), established upon the approval of the Ministry of Education of the State Council in 1985, is a comprehensive university attached to Beijing Municipality. Formerly, it arose from over 30 branch campuses attached to universities like Peking University, Tsinghua University and etc. Gearing to the municipal as well as national demands in social and economic development, BUU takes it as a prime task to cultivate high-caliber practical talents. Over 30-odd years‟ growth, its comprehensive strength has been remarkably enhanced as a result of the establishment of a complete talent-cultivating system. Under this system, numerous disciplines including economics, management, arts, law, science, engineering, teaching, history, and medicine prop up one another through coordinated development. Currently, BUU is one of the largest universities in Beijing, which focuses on undergraduate education while promoting coordinated development of postgraduate education, higher vocational education, continued education and international education.The university has now a gross floor area of around 600,000 square meters, more than 2.4 million volumes in library collections, nearly 1,800 full-time teachers, around 30,000 registered students, among whom more than 20,000 are undergraduates, nearly 8,000 are students in junior colleges and higher vocational colleges under BUU, more than 1,000 are international students, and a certain number of postgraduate students. In addition, the University also has a total of more than 4,000 students who sign up for its various education programs for adults. Over the past thirty-odd years, the university has nurtured 170,000 graduates, many of whom are now serving as leaders and backbones in government agencies and large-scale enterprises, contributing to the vigorous progress in all walks of life.Exploring InternationalCommunication and CooperationInternationalization is one of the significant developing strategies of BUU. The university aims at enriching students‟ experience both at home and abroad, increasing their international awareness, broadening their horizon, improving their ability to understand people from different cultures and to communicate with them, and making them more competitive in the construction of Beijing into a world city in the future.BUU conducts international programs designed to cultivate excellent and competitive students. The university provides various educational opportunities through internationalcooperative projects with about 180 institutions of higher learning in more than 30 countries and areas overseas. The university conducts “3+1” and “4+1” programs and graduate educatio nal cooperative programs with WestminsterUniversity, Anglia Ruskin University, Gloucester University, Trinity St David Universityof Wales, Roehampton University, Sheffield Hallam University in UK. The University conducts student exchange programs and programs offering master degree diploma with Emporia State University, in which our students are entitled to pay in-state tuition. The university conducts student exchange programs with University of California Riverside in America, Niigata University, Aichi Bunkyo University, and Tokyo Jogakkan College in Japan, Konkuk University and University of Seoul in South Korea, Chinekuo Technology University, National Yunlin University of Science and Technology, Chung Yuan Christian University, Lunghwa University of Science and Technology, Ta Hwa Institute of Technology, and Chaoyang University of Technology in Taiwan. And the University conducts graduate program of outdoor education with Link Ping University in Sweden. Participants in various cooperative projects are granted preferential treatment in tuition and accommodation. An increasing number of students are participating cooperative projects and the university expects that 8% of all the students will have had overseas learning experience by 2015.BUU actively introduces the advanced educational resources and advanced international teaching practices, and thus combining international and national education effectively. It exposes its students to advanced international education through inviting overseas scholars and conducting bilingual teaching or English teaching by domestic bilingual teachers. The university‟s international education attracts students from all over the world. More than 1000 students from over 30 countries come to our university and study here every year. These overseas students experience the international atmosphere on campus and the different cultures around.The university carries out academic exchanges through mutual academic visits, forums and seminars, giving impetus to its development of running a university internationally. In recent years, Beijing Union University has succeeded in hosting the International Seminar among China, South Korea and America, Beijing International Forum for Special Education Scholars, International V ocational Education Forum, and International Seminar on Internationalized Strategy Development of Local Universities. The university alsojoint with universities in Taiwan such as National Taipei University of Technology in hosting Academic Seminars on Higher Education across the Taiwan Strait many times. Great impact has been made in educational circles both home and abroad.College of Applied Arts and ScienceCollege of Applied Arts and Science is devoted to cultivating versatile and practical talents. The College mainly cultivates undergraduates and is gradually expanding its scope of postgraduates. Taking Literature, History, Law, and Geography as its main subjects, the College now owns a first-l evel discipline master‟s unit for Archeology, 4 second-level discipline master units for Specialized History, Cultural Heritage Zone Protection Plan, Business and Law, and Information Resource Management and 1 master unit for Law along with 10 undergraduate specialties. The College has nearly 2,700 undergraduates and 169 postgraduates.Adhering to the characteristic principle of talent cultivation of “putting practice and application first, making study serve the practical purpose”, the College takes “advocating academy, caring humanity, establishing ethics, and fostering elites” as its mission. By constantly deepening education and teaching reforms, the College continuously improves the teaching quality and the level of talent cultivation.Undergraduate Specialties:LawChinese Language and LiteratureJournalism (including Film and Television and Communications)AdvertisingNetwork and New MediaHistoryCultural Relics and MuseologyArchival ScienceHuman Geography and Urban and Rural PlanningGeographic Information SciencePostgraduate Specialties:ArcheologySpecialized HistoryMaster of LawCultural Heritage Zone Protection PlanInformation Resource ManagementTeachers’ CollegeEstablished in 1978, Teachers‟ College was formerly known as the Branch School of Beijing Normal University. The Branch School was incorporated into BUU in 1985, with a school mission to cultivate excellent teachers for basic education, preschool education and vocational education.The College mainly engages in general undergraduate teacher education and actively develops graduate education. It now opens 8 undergraduate programs. Furthermore, it is an authorized institution for Master‟s Degree in Education (Elementary Education, Psychological Health Education and V ocational and Technical Education) and Educational Intelligent Technology.Adhering to the school motto of “making study serves the practical purpose”, the College focuses on fostering students‟ practical skills and innovation ability. It has practical teaching centers with improved systems and advanced technologies, such as Teacher Education Practice Center. Practical teaching conditions are complete for specialties, such as Applied Psychology, Information Control Technology (including Robotics), Digital Media Technology, Musicology and Dancology along with Microteaching and Virtual Scene Teaching. The College has established multiple “Off Campus Talent Cultivation Bases” in industrial parks along with middle and primary schools in related industries. The College helps students better integrate into the society through undertaking …characteristic projects‟ on elementary physical education and aesthetic education.In recent years, the College has won nearly 100 awards at national and city levels and above in various competitions and scientific and technological culture events, such as China Undergraduate Mathematical Contest in Modeling, National Undergraduate Electronics Design Contest, National English Competition for College Students, Singing and Dance Contest and Sports Contest.Undergraduate Education 4-Year ProgramTeacher-related Specialty: Elementary Education, Preschool Education, Applied Psychology, Chinese Language and Literature, English, Musicology, Computer Science and Information Technology and Digital Media Technology.Masters of Education: 2-Year Program, research fields include Elementary Education, Psychological Health Education and Vocational and Technical Education (Information Technology).Academic Masters: 3-Year Program, research fields include Educational Intelligent Technology.Business CollegeEstablished in 1978, Business College is a general undergraduate college devoted to cultivating talents in the fields of Economics and Management Science. Located in Beijing‟s Central Business District (CBD), the College is a member unit of Beijing CBD Business School Alliance. The College boasts Finance as a …national-level characteristic specialty‟. Moreover, experimental classes with English as the language of instruction have been introduced for the International Business course.The College is also an authorized institution which offers Master‟s Degree in Finance as well as Business Administration as the first level discipline. Among specialized teachers, doctors account for 69.33% while 60% of the teachers have the title of associate professor and above. As many as 61.33% of its teachers have either studied or conducted research abroad or have entrepreneurial experience in the related industry.The College strives to cultivate applied business talents with an international appeal. Through cooperation with universities in the United States, Canada, the United Kingdom, France, South Korea, Hong Kong and Taiwan, the College has provided students with nearly 30 international learning and exchange projects. The learning and exchange rate of students going abroad each year is higher than 30%. By virtue of adopting the accreditation system of the Association of Advance Collegiate Schools of Business (AACSB) –the most authoritative international business studies accreditation body– as its quality standard, the College cultivates internationalized business talents and has shaped itself as an international business college.Current Specialties:International Economics and Trade, Finance, International Accounting, Marketing, International Business and Information Management and Information SystemCollege of Biochemical EngineeringCollege of Biochemical Engineeringis an engineering-orientated comprehensive college. It combines engineering with management and engineering with art to produce graduates for modern urban-oriented industries, modern services, cultural & creative industries.The College currently offers 3 master programs and 8 undergraduate programs. The College not only provides her students with favorable learning conditions, but also has established dozens of stable off-campus practice bases through good cooperation with enterprises. By guiding the students to obtain relevant professional certificates, the College helps her graduates to enhance their competitiveness in employment.Moreover, various international programs such as Student Exchange Programs, Dual Bachelor Degree Programs and Master Degree Programs have been introduced into the curriculum to equip students with an international perspective and increase their international competitive edge.Master Programs:Food Science and Engineering: 3-year program, Master of EngineeringFood Science and Engineering (Food Biological Separation Technology): 3-year program, Master of EngineeringMaster of Business Administration (Human Resource Management): 3-year program, Master of ManagementUndergraduate Programs:Building Environment and Energy Application Engineering: 3-8year program, Bachelor of EngineeringIndustrial Design: 3-8year program, Bachelor of EngineeringBiological Engineering: 3-8year program, Bachelor of Engineering Pharmaceutical Engineering: 3-8year program, Bachelor of EngineeringHuman Resources Management: 3-8year program, Bachelor of Management Project management: 3-8year program, Bachelor of ManagementFood Science and Engineering: 3-8year program, Bachelor of EngineeringFood Quality and Safety: 3-8year program, Bachelor of EngineeringTourism CollegeFounded in 1978, Tourism College is the earliest of its kind in China. Its primary purpose is to cultivate senior tourism management talents for tourism industry, especially for Beijing, the capital city. Students are supposed to have solid major basis, practical ability, social responsibility and international perspective at their graduation.Propelled by continuous teaching construction and reform, the College has in recent years made some landmark achievements in its construction ofnational unique specialty, national excellent teaching team, and municipal innovation in training mode and off-campus training base. Tourism Tribune, founded by the Institute, is the only keyjournal of journalism in the country, widely recognized by both the travel industry and the academic professionals as the most authoritative journal of the kind.In pursuit of the talent cultivation philosophy of “Great Learn ing and Graceful Action for Field Trip Abroad”, the Tourism College efforts to enhance international exchange and cooperation, so as to explore a new mode for cultivating internationalized high-end tourism talents meeting the developmental demands of the tourism industry in the capital.The College has set up multiple cooperative education projects in France, Ireland, the United Kingdom, the United States, Poland, Canada, Japan and Taiwan, providing students with opportunities to study abroad, engage in research and studies, and conduct professional practice and exchange.Current specialties:Tourism Management,Events Management,Hospitality Management (4-Year Program, Bachelors in Management), Japanese,English (4-Year Program, Bachelors in Arts)Culinary Arts (3-Year Program)College of Information TechnologyCollege of Information Technology cultivatesapplication-oriented IT talents under four undergraduate programs and offers a master degree on computer science and technology.The College is the principal campus for the national and Beijing municipal Innovative ExperimentalDistrict for Cultivating Service-outsourcing Talents. The establishment of the district was approved by BeijingEducation Commission and the Ministry of Education of the State Council. In 2011, pulling together the best teaching resources of the university, an experimental class of computer science and technology was established within the district so as to intensify the basic training of the program, to cultivate advanced talents with broad international vision, and to meet the rapid development of information service-outsourcing industry in Beijing.The Collegeprovides an excellent environment for experimental teaching. In the last few years, a fund of tens of millions yuan has been invested by both Beijing Municipality and BUU to constructa series of laboratories and study bases of national advanced level, which pertains to DSP, optical fiber communication, mobile communication, microcontroller-and-embedded-systems, IC design, mixed signal and SoC technology, intelligent electronic system, computer network integration system, software engineering and the capital university digital technology innovation base. The college develops extensive production-education-research cooperation with industries and establishes engineering technology center that provides excellent engineering training, learning and research conditions for students.Current programs:Computer Science and TechnologyCommunication EngineeringElectronic Information EngineeringElectronic Information Science and TechnologyCollege of Mechanical and Electrical EngineeringCollege of Mechanical and Electronic Engineering takes mechanical engineering as its key field of discipline development and cultivates advanced application-oriented talents urgently needed by the modern manufacturing and productive service industry. Majors in the College are closely related to the four industries: energy-saving and environmental protection, high-end equipment manufacture, new materials, and new energy vehicles which are among the seven budding industries to be promoted according to the state‟s twelfth five-year plan.In line with the twelfth five-year plan of Beijing Municipality, the high-end manufacturing will be highly fostered, the traditional manufacturing will be improved and advanced, the productive service industry will be promoted, and the budding strategic industry will be developed with great effort. The enrollment of students in the mechanical engineering majors of the College is just targeted at training qualified engineering and technical talents catering for the requirement of the industrial structure adjustment for the state‟s and Beijing‟s economical development.The College has established a close cooperative relation with a series of first-rate high technology enterprises home and abroad, including Siemens from German, Beijing Benz-Daimler. Chrysler Automotive Co. Ltd, SMC Co. from Japan, Beijing Hyundai Motor Co. Ltd, and Beijing Huade Fluid Power Co. Ltd in terms of major development, practical skill training, and the construction of inside-and-outside campus teaching and academic research base.Current programs:Mechanical Engineering and AutomationIndustrial EngineeringMaterial Science and EngineeringAutomobile Service EngineeringAutomationCollegeAutomation College is placed for you to be a reflective, critical practitioner with a variety of careers ranging from engineer to business or management personnel with technological background. The College offers a wide range of undergraduate degree courses and two Master‟s degree courses. The courses in each program focus on current issues and future trends in their respective field and provide tools and methods for addressing problems. The state-of-the-art laboratories provide a good platform to foster applied skills. Over 98% students get employed immediately after graduate.The Collegehas three research centers, Institute of Automation Engineering, Institute of Modern Logistic Engineeringand Institute of Robotics. Research and development interests range from service robots, intelligent transportation and IoT (Internet of Things) to GPS and GIS applications in logistics.The College attaches great important to internationalization. Many of students have opportunities to go abroad for further study and some short-term overseas study programs. Signal and Control of Rail Transit program sponsored by BUU and The Ural State University of Railway Transport (Russia) is scheduled to operation in 2017. Current programs:Electrical Engineering and AutomationAutomationTraffic EngineeringLogistic EngineeringSignal and Control of Rail TransitIntelligent Transportation EngineeringManagement CollegeTaking economic and management as its principal majors, Management College is an undergraduate college underlain by such university-base disciplines as enterprise management science, financial science, and regional economics. The College has established a number of academic research centers including Beijing Research Center for Small and Medium Sized Enterprises, Beijing Center for Financial Research, Beijing Institute of Economic and Business Development, and Research Center of Financial Management for Innovative Enterprises.The College is the core member of the National-level and Beijing Municipal，level Experimental Area of the Service Outsourcing Talent Cultivate Model Innovation. Its Finance specialty is the national-level featured specialty and Beijing's pilot project.Theexperimental teaching center in this College is a model center for colleges and universities in Beijing. It contains first-rate business management laboratories imitating and simulating the real-life working places which serve as a good practical training circumstance for the students to consolidate their disciplinary knowledge, foster their practical and innovative competence,improve their adaptability and become more competitive in employment.In line with social demands on advanced application-oriented talents, the College probes into the teaching rules of application-oriented education, and promotes the cooperation of a production-education-research model. Off-campus cooperative bases are established to provide platforms for the students‟ social experimental practice. Besides, the cooperative enterprises may offer considerable amount of scholarship for excellent students.Current Programs:Business AdministrationBusinessAdministrationFinancialAccountingFinancial ManagementInformation Management &Information SystemE-commerceCollegeof Special EducationCollege of Special Education is China‟s first comprehensive special education college which targets both healthy and physically challenged students. Relying on the educational development platform of Beijing, the College strives to excel in applied education while meeting special education needs and actively building a higher education brand for the physically challenged students of Beijing. Moreover, the College is struggling to shape its characteristic campus culture of “combining healthy and physically challenged people for common growth”.The College has high-standard modern multi-use buildings for students, including laboratories and dormitories. With the provision of comprehensive infrastructural facilities for teaching, the College makes it possible for the students to improve their skills in an all-inclusive manner. With persistent focus on teaching quality, the College strives to enrich stude nts‟ life after school. Students get improved in all aspects, including literature and art, sports and science and technology.As Beijing‟s talent pool and training base of physically challenged athletes, the College has cultivated influential athletes for Beijing and national disabled sports events. At Paralympic Games 2008, Paralympic Games 2012 and Paralympic Games 2016, 8 disabled students from the College won 5 gold medals and 3 silver medals, breaking 2 world records.Current programs:Assistive Technology for Information Accessibility: 3-Year Program, Master, Software EngineeringSpecial Education: 2-Year Program, Master, EducationAcupuncture and Massage: 3-Year Program, Master, Clinical MedicineSpecial Education: 4-Year Program, Undergraduate, PedagogyPreschool Education: 4-Year Program, Undergraduate, PedagogyScience of Rehabilitation and Education: 4-Year Program, Undergraduate, Pedagogy Visual Communication Design: 4-Year Program, Arts, Students with Hearing DisabilityComputer Science and Technology: 4-Year Program, Undergraduate, Engineering, Students with Hearing DisabilityAcupuncture and Massage: 5-Year Program, Undergraduate, Clinical Medicine, Students with Visual DisabilityMusicology: 4-Year Program, Undergraduate, Arts, Students with Visual DisabilityCollege of ArtsWith a strong ability to conduct scientific research and serve the society, College of Arts owns 3 research institutes, namely Handcraft Research Academy, Art and Design Research Institute and Digital Media Research Center, along with 1 Experimental Center of Arts. Talent cultivation has 3 educational levels: postgraduate, undergraduate and students upgrading from junior college to university. With more than 1,900 students, the College is one of the sponsoring colleges of Beijing Excellent Artistic Talent (Art and Design) Cultivation College Union. In 2014, the College was approved as Beijing Municipal Cultural Creative Industry Talents Cultivation Base, thus becoming Beijing‟s important base for fostering artistic talents.The College has characteristic disciplines and advantageous specialties. Facing capital‟s cultural creative industry, the College regards cultivating high-quality applied artistic talents as its duty. Following the talent cultivation philosophy of “Inheriting Tradition, Integrating Industry and Teaching, Achieving Artistic Innovation, and Serving the Society”, the College has developed a unique mode for cultivating versatile, innovative and applied talents. The College has a high popularity and ranks atop among similar colleges in terms of teaching quality.Current programs:Attires and Costumes DesignVisual Communication DesignEnvironmental DesignProduct DesignDigital Media ArtPaintingPerformanceCollege of Applied Sciences and TechnologyCollege of Applied Science and Technology specializes in higher vocational education. Covering 20 specialties of junior college, undergraduate, and postgraduate studies, the College is the only one to offer large-scale vocational education for postgraduates, undergraduates, students upgrading from junior college to university and junior college students in China‟s colleges and universities. The College not only has practice and internship base but also boasts job qualification certificate training base for cultivating vocational education talents at the levels of junior college, undergraduate, and postgraduate, thereby providing students with multi-level comprehensive environment in terms of educational and professional practice.The College collaborates with several international universitiesin the United States, the UK, Japan, New Zealand, Cuba, Spain, etc. Each year, the College sends students abroad for practice and internship.Specialties for Students Upgrading from Junior College To University: Accountancy, Marketing, E-Business, International Economics and Trade, Finance, Business Administration, Information Management and Information System, Electronic Information Engineering and Computer Science and Technology. Specialties for Higher Vocational Colleges:Electronic Information Engineering Technology, Software Technology, Visual Communication Design and Production, Digital Media Art and Design, Business English and Applied Spanish.。
外文翻译模板
大连交通大学信息工程学院毕业设计(论文)外文翻译学生姓名陈辉专业班级机械073班指导教师王凤彪职称讲师所在单位机械工程系教学部主任吕海霆完成日期 2011年4月15日Numerical Control SystemThe numerical control system is the digital control system abbreviation. By early is composed of hardware circuit is called hardware numerical control (Hard NC), after 1970, hardware circuit components gradually instead by the computer called for computer numerical control system.Computerized numerical control system is a system that is use computer control processing function to achieve numerical control system. CNC system according to the computer memory stored in the control program execution part or all, numerical control function, and is equipped with interface circuit and servo drive the special computer system.CNC system consists of NC program, input devices; output devices, computer numerical control equipment (CNC equipment), programmable logic controllers (PLC), the spindle and feed drive (servo) drive (including detection devices) and so on.The core of CNC system is equipment. By using the computer system with the function of software and PLC instead of the traditional machine electric device to make the system logic control more compact, its flexibility and versatility, reliability become more better, easy to implement complex numerical control function, use and maintenance can be more convenient, and it also has connected and super ordination machine and the remote communication function.At present, the numerical control system has variety of different forms; composition structure has its own characteristics. These structural features from the basic requirements of the initial system design and engineering design ideas. For example, the control system of point and continuous path control systems have different requirements. For the T system and the M system, there are also very different, the former applies to rotary part processing, the latter suitable for special-shaped the axially symmetrical parts processing. For different manufacturers, based on historical development factors and vary their complex factors, may also be thinking in the design is different. For example, the United States Dynapath system uses a small plate for easy replacement and flexible combination of the board; while Japan FANUC system is a large plate structure tends to make the system work in favor of reliability, make the system MTBF rate continues to increase. However, no matter what kind of system, their basic principle and structure are very similar.The numerical control system generally consists of three major components, namely the control system, servo system and position measuring system. Control procedures by interpolation operation work piece, issue control instructions to the servo drive system; servo drive system control instructions amplified by the servo motor-driven mechanical movement required; measurement system detects the movement of mechanical position or speed, and feedback to the control system, to modify the control instructions. These three parts combine to form a complete closed-loop control of the CNC system.Control system mainly consists of bus, CPU, power supply, memory, operating panel and display, position control unit, programmable logic controller control unit and datainput / output interface and so on. The latest generation of CNC system also includes a communication unit; it can complete the CNC, PLC's internal data communications and external high-order networks. Servo drive system including servo drives and motors. Position measuring system is mainly used grating, or circular grating incremental displacement encoder.CNC system hardware from the NC device, input / output devices, drives and machine logic control devices, electrical components, between the four parts through the I / O interface to interconnect.Numerical control device is the core of CNC system, its software and hardware to control the implementation of various CNC functions.The hardware structure of no device by CNC installations in the printed circuit board with infixing pattern can be divided into the big board structure and function module (small board) structure; Press CNC apparatus hardware manufacturing mode, can be divided into special structure and personal computer type structure; Press CNC apparatus in the number of microprocessor can be divided into single microprocessor structure and many microprocessor structure.(1)Large panel structure and function templates structure1) Large panel structurePanel structures CNC system CNC equipment from the main circuit board, position control panels, PC boards, graphics control panel, additional I / O board and power supply unit and other components. The main circuit board printed circuit board is big; the other circuit board is a small plate, inserted in the large printed circuit board slot. This structure is similar to the structure of micro-computer.2) Function templates structure(2)Single-microprocessor structure and mulct-microprocessor structure1) Single-microprocessor structureIn a single-microprocessor structure, only a microprocessor to focus on control, time-sharing deals with the various tasks of CNC equipment.2) melt-microprocessor structureWith the increase in numerical control system functions, CNC machine tools to improve the processing speed of a single microprocessor CNC system can not meet the requirement; therefore, many CNC systems uses a multi-microprocessor structure. If a numerical control system has two or more microprocessors, each microprocessor via the data bus or communication to connect, share system memory and common I / O interfaces, each processor sharing system Part of the work, which is multi-processor systems.CNC software is divided into application software and system software. CNC system software for the realization of various functions of the CNC system, the preparation of special software, also known as control software, stored in the computer EPROM memory. CNC Systems feature a variety of settings and different control schemes, and their system software in the structure and size vary widely, but generally include input data processing procedures, computing interpolation procedures, speed control procedures, management procedures and diagnostic procedures.(1)Input data processing proceduresIt receives input part program, the standard code, said processing instructions and datadecoding, data processing, according to the prescribed format for storage. Some systems also calculated to compensate, or interpolation operation and speed control for pre-computation. Typically, the input data processing program, including input, decoding and data processing three elements.(2)Computing interpolation proceduresCNC work piece processing system according to the data provided, such as curve type, start, end, etc. operations. According to the results of operations were sent to each axis feed pulse. This process is called interpolation operation. Feed drive servo system Impulsive table or by a corresponding movement of the tool to complete the procedural requirements of the processing tasks.Interpolation for CNC system is the side of the operation, while processing, is a typical real-time control, so the interpolation directly affects the speed of operation the machine feed rate, and should therefore be possible to shorten computation time, which is the preparation of interpolation Complements the key to the program.(3)Speed control proceduresSpeed control program according to the given value control the speed of operation of the frequency interpolation, in order to maintain a predetermined feed rate. Changes in speed is large, the need for automatic control of acceleration and deceleration to avoid speed drive system caused by mutations in step.(4)Management proceduresManagement procedures responsible for data input, data processing, interpolation processing services operations as the various procedures for regulation and management. Management process but also on the panel command, the clock signal, the interrupt caused by fault signals for processing.(5)Diagnostic proceduresDiagnostic features are found in the running system failure in a timely manner, and that the type of failure. Y ou can also run before or after the failure, check the system main components (CPU, memory, interfaces, switches, servo systems, etc.) function is normal, and that the site of failure.MachiningAny machining must have three basic conditions: machining tools, work piece and machining sports. Machining tool edge should be, the material must be rigid than the work piece. Different forms of tool structure and cutting movements constitute different cutting methods. Blade with a blade-shaped and have a fixed number of methods for cutting tools for turning, drilling, boring, milling, planning, broaching, and sawing, etc.; edge shape and edge with no fixed number of abrasive or abrasive Cutting methods are grinding, grinding, honing and polishing.Machining is the most important machinery manufacturing processing methods. Although the rough improve manufacturing precision, casting, forging, extrusion, powder metallurgy processing applications on widely, but to adapt to a wide range of machining,and can achieve high accuracy and low surface roughness, in Manufacturing still plays an important role in the process. Cutting metal materials have many classifications. Common are the following three kinds.By cutting process feature distinguishing characteristics of the decision process on the structure of cutting tools and cutting tools and work piece relative motion form. According to the technical characteristics of cutting can be divided into: turning, milling, drilling, boring, reaming, planning, shaping, slotting, broaching, sawing, grinding, grinding, honing, super finishing, polishing, gear Processing, the worm process, thread processing, ultra-precision machining, bench and scrapers and so on. By material removal rate and machining accuracy distinction can be divided into: ① rough: with large depth of cut, one or a few times by the knife away from the work cut out most or all allowances, such as rough turning, rough planning, Rough milling, drilling and sawing, etc., rough machining precision high efficiency low, generally used as a pre-processing, and sometimes also for final processing. ② Semi-finishing: General roughing and finishing as the middle between the process, but the work piece accuracy and surface roughness on the less demanding position, but also can be used as the final processing. ③ finishing: cutting with a fine way to achieve higher machining surface accuracy and surface quality, such as fine cars, fine planning, precision hinges, grinding and so on. General is the final finishing process. ④Finishing process: after the finish, the aim is to obtain a smaller surface roughness and to slightly improve the accuracy. Finishing processing allowance is small, such as honing, grinding, ultra-precision grinding and super finishing and so on. ⑤Modification process: the aim is to reduce the surface roughness, to improve the corrosion, dust properties and improve appearance, but does not require higher precision, such as polishing, sanding, etc. ⑥ultra-precision machining: aerospace, lasers, electronics, nuclear energy and other cutting-edge technologies that need some special precision parts, high accuracy over IT4, surface roughness less than Ra 0.01 microns. This need to take special measures to ultra-precision machining, such as turning mirror, mirror grinding, chemical mechanical polishing of soft abrasive.Distinguished by method of surface machining, the work piece is to rely on the machined surface for cutting tool and the work piece to obtain the relative motion. By surface methods, cutting can be divided into three categories. ①tip trajectory method: relying on the tip relative to the trajectory of the surface to obtain the required work piece surface geometry, such as cylindrical turning, planning surface, cylindrical grinding, with the forming surface, such as by turning mode. The trajectory depends on the tool tip provided by the cutting tool and work piece relative motion. ② forming tool method: short forming method, with the final work piece surface profile that matches the shape forming cutter or grinding wheel, such as processing a shaped surface. At this time forming part of the machine movement was replaced by the blade geometry, such as the shape of turning, milling and forming grinding forming and so on. The more difficult the manufacture of forming cutter, machine - clamp - work piece - tool formed by the process system can withstand the cutting force is limited, forming method is generally used for processing short shaped surface. ③generating method: also known as rotary cutting method, cutting tool and work piece during processing as a relatively developed into a campaign tool (or wheel) and the work piece instantaneous center line of pure rolling interaction between thetwo maintain a certain ratio between Is obtained by processing the surface of the blade in this movement in the envelope. Gear machining hobbling, gear shaping, shaving, honing, and grinding teeth (not including form grinding teeth), etc. are generating method processing.PLCEarly called the programmable logic controller PLC (Programmable Logic Controller, PLC), which is mainly used to replace the logic control relays. With the technology, which uses micro-computer technology, industrial control device function has been greatly exceeded the scope of logic control, therefore, such a device today called programmable logic controller, referred to as the PC. However, in order to avoid personal computer (Personal Computer) in the short confusion, it will be referred to as programmable logic controller PLC, plc since 1966, the U.S. Digital Equipment Corporation (DEC) developed there, the current United States, Japan, Germany, PLC Good quality and powerful.The basic structure of Programmable Logic ControllerA. PowerPLC's power in the whole system plays a very important role. If you do not have a good, reliable power system is not working, so the PLC manufacturers design and manufacture of power very seriously. General AC voltage fluctuations of +10% (+15%) range, you can not take other measures to PLC to connect directly to the AC line.B.Central processing unit (CPU)Central processing unit (CPU) is the central PLC control. It is given by the function of PLC system program from the programmer receives and stores the user program and data type; check the power supply, memory, I / O and timer alert status, and to diagnose syntax errors in the user program. When the PLC into run-time, first it scans the scene to receive the status of various input devices and data, respectively, into I / O image area, and then one by one from the user program reads the user program memory, after a shell and press Provisions of the Directive the result of logic or arithmetic operations into the I / O image area or data register. And the entire user program is finished, and finally I / O image area of the state or the output of the output register data to the appropriate output device, and so on to run until stopped.To further improve the reliability of PLC, PLC is also large in recent years constitutes a redundant dual-CPU system, or by three voting systems CPU. Thus, even if a CPU fails, the whole system can still work properly.C.MemoryStorage system software of memory called system program memory. Storage application software of memory called the user program memory.D.Input and output interface circuit1, the live input interface circuit by the optical coupling circuit and the computer input interface circuit, the role of PLC and field control of an interface for input channels.2, Field output interface circuit by the output data registers, interrupt request strobe circuit and integrated circuit, the role of PLC output interface circuit through the on-siteimplementation of parts of the output to the field corresponding control signal.E.Function moduleSuch as counting, positioning modules.munication moduleSuch as Ethernet, RS485, Prefab’s-DP communication module.数控系统数控系统是数字控制系统简称，英文名称为Numerical Control System，早期是由硬件电路构成的称为硬件数控（Hard NC），1970年代以后，硬件电路元件逐步由专用的计算机代替称为计算机数控系统。
介绍山西农业大学英语作文
介绍山西农业大学英语作文Mountain West Agriculture University is a vibrant and dynamic institution located in the heart of Shanxi province. With a focus on practical learning and hands-on experience, students at our university have the opportunity to engagein cutting-edge research and innovative projects that are shaping the future of agriculture.The campus of Mountain West Agriculture University is a bustling hub of activity, with students from diverse backgrounds coming together to learn, grow, and explore new ideas. From state-of-the-art laboratories to sprawlingfields and greenhouses, our university provides studentswith the resources they need to succeed in their academic and professional endeavors.One of the unique features of Mountain West Agriculture University is its strong emphasis on sustainability and environmental stewardship. Students are encouraged to think critically about the impact of their work on the naturalworld and to develop innovative solutions to pressing environmental challenges. Through hands-on projects and research opportunities, students gain valuable skills and knowledge that will serve them well in their future careers.At Mountain West Agriculture University, we believe in the power of community and collaboration. Students have the opportunity to work closely with faculty members andindustry professionals, gaining valuable insights and mentorship that will help them succeed in their chosenfield. Whether through research projects, internships, or study abroad programs, students at our university are constantly expanding their horizons and pushing the boundaries of what is possible in the field of agriculture.In conclusion, Mountain West Agriculture University isa place where students can thrive, grow, and make a real difference in the world. With a focus on practical learning, sustainability, and community engagement, our university is preparing the next generation of agricultural leaders to tackle the challenges of tomorrow. Come join us and be apart of something truly special!。
7-chapter-9-学校简介的汉英翻译(共26张)
❖ Department of Accounting
❖ 化学系 ❖ Department of Chemistry
❖ 东方语言学系
❖ Department of Oriental Languages & Literature
2021年12月28日
第4页，共26页。
English College
❖ 科学院
❖ 职业学校
2021年12月28日
第3页，共26页。
English College
❖ 材料(cáiliào)工程系 ❖ Department of Materials Engineering ❖ 地理系 ❖ Department of Geography
❖ 地质系 ❖ Department of Geology ❖ 电机工程系 ❖ Department of Electrical Engineering
2021年12月28日
第12页，共26页。
English College
2021年12月28日
第13页，共26页。
English College
❖ 浙江越秀外国语学院是经国家教育部批准建立的全日制普通本科外国 语学院，开设有英语、日语、韩语、法语、德语、俄语、西班牙语(xī bān yá yǔ)、阿拉伯语、意大利语等九个外语语种30余个外语及相关涉外 专业，是浙江省开设外语语种最多、外语人才培养规模最大的外语类 院校。
❖ Zhejiang Yuexiu University of Foreign languages is a full-time institute of tertiary education established under the consent of the National Ministry of Education. It is unique in Zhejiang Province for its dedication to and specialty in foreign languages teaching.
文献翻译模板_建筑工程与环境学院_科院
英文翻译分院理工分院专业土木工程届别2008 届学号084174263姓名朱鑫指导教师梧松2011 年 12 月 14日<文献翻译一：原文>USE OF SHALLOW SLOTTED FOUNDATIONSoil Mechanics and Foundation Engineering, V ol. 48, No. 1, March, 2011 (Russian Original No. 1, Jan.-Feb., 2011)Experience acquired with the design and installation of slotted foundations during the construction of buildings in Moscow and the Moscow Oblast is codified. Examples are cited for use of these foundations on construction projects.In Moscow, these foundation designs have been used for the construction of a 22-story adminis-trative building on Nametkina Street, a 25-story hotel on the Dmitrovskii Highway, and a warehouse complex in the city of Vidnoe within the Moscow Oblast . As a rule, continuous monolithic reinforced-concrete slabs on a natural bed are used as foundations for the construction of residential and administrative buildings up to 25-stories high in Moscow.In a number of cases, however, installation of a slab foundation is difficult, since the limiting allowabletilts and the relative difference between settlements of the foundation bed are exceeded with this design;this is frequently caused by nonuniform loads due to the structure, or by nonuniformity of occurrence of geologic-engineering layers of the bed in plan, and with respect to depth. Nonuniformity of the load on the bed may be caused by insufficient stiffness of the building's superstructure resulting from an archi- tectural-planning decision, wind loads, etc.An example of the design and installation of foundations with a nonuniform load on the bed is the construction of the 22-story administrative building on Nametkina Street.The building has a trapezoidal planform with dimensions of 64.7 30.3 m. Clayey loams of slightly plastic and semi-hard consistencies with a layer thickness of 1.5 m below the bottom of the pit, which are underlain by dense sands ranging from silty to medium fineness with a thickness of 1.0-3.0m, reside at a depth of from 10.0 to 11.5 m in the bed of the foundation slab under design. Clayey loams and sandy loams of slightly plastic andsemi-hard consistency with a layer thickness of 3 m, which are underlain by 4 m of clayey loams of fluid consistency, are encountered below throughout the section. Saturated fine and silty sandy soils are encountered at a depth of 20 m and more.It was initially proposed to install a continuous monolithic reinforced-concrete slab 1.6 m thick on the natural bed comprised of slightly plastic and semi-hard clayey loams. The average coefficient of subgrade reaction calculated via the KROSS program C = 402 tons/m. Static analyses based on the SCAD software package indicated that: the maximum slab settlement s max was 14.3 cm, and the relative 2 Fig. 1. Monolithic slotted foundations: a) single-slot; b) dual-slot;c) multiple-slot in the bed of foundation slab; 1) monolithicreinforced-concrete wall; 2) raft; 3) foundation slab; 4) concretepreparation.The slot foundations were installed from a monolithic Class V15 concrete in the ground under a reinforced-concrete slab with use of a bar machine mounted on a MZTs-75 tractor), and were reinforced by a 5VpI-100 mesh. A single-slot foundation was tested in conformity with requirements set forth in [5] to determine the limiting allowable load per 1 m of a single-slot strip foundation for a wall height d = 1.2 m and thickness δ = 0.15 m. The test results indicated that the maximum load taken-up by the foundations ranged from 380 kN for a settlement of 13.8 mm to 470 kN for a settlement of 5.65 mm (Fig. 2).Use of multiple-slot strip foundations in the bed of the foundation slab of the administrative building on Nametkina Street made it possible to accrue a significant saving as compared with a slab- pile foundation. Material outlays were reduced by a factor of 1.9. of slotted foundation based on results of field tests on Nametkina Street.Operations involving the installation of a foundation slab with slotted foundations under the 25- story hotel were conducted on the construction project for the Dmitrovskii business zone. In the upper part of the geologic-engineering section, clayey loams of from highly plastic to semi-hard consistency and of different origin reside at a depth of 3-4 m under a layer of saturated soils 1.5 m thick. Below in a layer 8.2-10.1 m thick, morainic clayey loams of predominantly highly plastic con- sistency exist in the roof, but are semi-hard at the lower surface of the layer.Thereafter, fluvioglacial semi-hard clayey loams are encountered in a layer 1.5 m thick and morainic hard clayey loams in a layer 17.8 m thick. Turning attention to the 0.5-0.7-m layer of highly plastic clayey loams in the upper section of the bed of the foundation slab, it was decided to cut through this layer with slotted foundations, embed- ding the lower surfaces of the walls of the foundations in the slightly plastic clayey loams.To reduce the difference in settlement of the foundation slab, the thickness of which was set equal to 1.5 m in accordance with the initial design, it was specified that multiple-slot foundations be installed in the longitudinal and transverse directions with a wall height of 1,200 mm, thickness of 150 mm, and an inter-wall spacing of 1.2-1.8 m. In conformity with the design, the slotted foundations were built in trenches previously excavat- ed with a bar machine mounted on an MZTs-75 tractor. The foundations were formed from Class 15A segment of a double-slotted foundation with a length of 1.0 m, thickness of 0.15 m, inter-slot distance (spacing) of 1.8 m, and depth of 1.2 m, which is joined along the top to a reinforced-concrete footing (below the raft) with dimensions of 1.8 1.0 m, was tested under a vertical static press-in load [5], which was transferred onto the reinforced-concrete footing by a DG-100 hydraulic jack. In testing one segment of the dual-slot foundations, the press-in load was brought to P = 750 kN with a settlement s = 7.34 mm without separation the soil (Fig. 4). Shallow slotted foundations have also been used in the bed of transportation ramp ona project in the industrial zone of Vidnoe. The consumption of concrete for the retaining wall of the ramp was reduced, and a significant saving accrued owing to the anchoring capacity of the slotted foundation in the silty-clayey soils. The soil conditions at the entrance to the industrial zone for freight-transport facilities are char- acterized by the occurrence of highly plastic clayey loams with a compression modulus of 12-19 In connection with possible collapse of the walls of the trenches, a foundation was installed using a ditcher mounted on a DT 75 crawler tractor with subsequent manual grading of soil in the trench. The geometric parameters of the single-slot foundation were: wall height d = 1.0 m, and thickness δ = 0.25 m. The reinforcement was a single A-III mesh with d = 20 mm and 300 300-mm openings. The cut-through slot was filled with monolithic Class V25 concrete of casting consistency.The foundation was tested under a vertical static press-in load using a DG-100 jack in conformity with requirements of [5]. Settlement was recorded by two dial deflectometers. Results of the tests are presented in Fig. 5. The maximum load on the foundation was 150 kN, and the settlement 19.6 mm. No foundation settlement had been recorded prior to the 40-50 kN load.As for the tests of the single-slot foundation, the dependence of settlement on load was linear during construction of the 22-story administrative building on Nametkina Street. In that case, use of the single-slot foundation made it possible to reduce material consumption by a factor of 1.6 as compared with traditional designs of shallow foundations, and by a factor of 2.1 as compared with pile foundations.The examples cited demonstrate that based on test results, the loads on the shallow slotted foundations are comparable to those of foundations of traditional designs. Use ofmultiple-slot strip foundations in the beds of monolithic reinforced-concrete slabs makes it possible to lower vertical displace-ments of the slabs in required sections, reducing the relative difference in settlements, and also to compensate for bending moments that develop in the foundation slab. Examples of effective implementation of shallow slotted foundations suggest their reliability.REFERENCES1. EA Sorochan, Foundations of Industrial Buildings [in Russian], Stroiizdat, Moscow (1986).2. EA Sorochan, VI Krutkov, and V A Kovalev, Shallow Foundations [in Russian], Izdatel'stvo ASV, Moscow (2009).3. Building Code 50-101-2004. Design and Installation of Beds and Foundations for Buildings and Structures [in Russian].4. Design Manual. Beds, Foundations, and Underground Structures [in Russian], Stroiizdat, Moscow (1985).5. GOST 5686-94. Soils. Methods for the Field Testing of Piles [in Russian].<文献翻译一：译文>使用浅层开槽基础土力学及基础工程第48卷2011年1月（俄罗斯原件2011年1~2月）开槽地基的设计和安装是根据在莫斯科和莫斯科州的楼宇建设中获得的经验而编纂的。
毕业设计(论文)外文资料及译文(模板
大连东软信息学院
毕业设计（论文）外文资料及译文
系所：
专业：
班级：
姓名：
学号：
大连东软信息学院
Dalian Neusoft University of Information
外文资料和译文格式要求
一、装订要求
1、外文资料原文（复印或打印）在前、译文在后、最后为指导教师评定成绩。
2、译文必须采用计算机输入、打印。
3、A4幅面打印，于左侧装订。
二、撰写要求
1、外文文献内容与所选课题相关。
2、本科学生译文汉字字数不少于4000字，高职学生译文汉字字数不少于2000字。
三、格式要求
1、译文字号：中文小四号宋体，英文小四号“Times New Roman”字型，全文统一，首行缩进2个中文字符，1.5倍行距。
2、译文页码：页码用阿拉伯数字连续编页，字体采用“Times New Roman”字体，字号小五，页底居中。
3、译文页眉：眉体使用单线，页眉说明五号宋体，居中“大连东软信息学院本科毕业设计（论文）译文”。
大连东软信息学院毕业设计（论文）译文
-1-。
山西英语专升本作文万能模板
山西英语专升本作文万能模板英文回答：Topic A: The role of technology in modern life。
In the contemporary era, technology has become an inextricable aspect of our lives, playing a multifaceted role that profoundly influences our social, economic, and personal spheres.Firstly, technology has revolutionized the way we communicate and connect with others. The advent of social media platforms, instant messaging apps, and video conferencing tools has enabled us to transcend geographical boundaries and stay connected with friends, family, and colleagues around the world. This has fostered a sense of global community and facilitates collaboration and knowledge sharing.Secondly, technology has transformed the economy andcreated unprecedented opportunities for innovation and growth. Automation and artificial intelligence have increased productivity and efficiency in various industries, leading to economic expansion and job creation. Additionally, e-commerce and online marketplaces have empowered businesses to reach a wider customer base and expand their global footprint.Thirdly, technology has had a significant impact on our personal lives. From fitness trackers and smart homes to entertainment platforms and educational resources, technology has enhanced our well-being, convenience, and access to information. We can now monitor our health, optimize our daily routines, and pursue our interests with greater ease and efficiency.However, it is important to acknowledge that the rapid advancement of technology also poses certain challenges. Concerns about privacy, data security, and the potential displacement of jobs by automation require careful consideration and ethical decision-making. Additionally,the digital divide, which refers to the gap in access toand utilization of technology, remains a persistent issue that needs to be addressed to ensure equitableopportunities for all.In conclusion, technology has become an essential part of modern life, offering numerous benefits and opportunities. While it is crucial to embrace technological advancements, it is equally important to navigate them with wisdom and Verantwortung, ensuring that we harness their potential for the greater good while mitigating potential risks.Topic B: The importance of education。
专升本演讲英语作文模板带翻译
专升本演讲英语作文模板带翻译Title: Speech Template for Adult Education Entrance Examination。
Good morning, ladies and gentlemen,。
I am honored to stand here today to share with you my thoughts on the topic of adult education entrance examination. As we all know, adult education is becoming increasingly popular in our society, and more and more people are choosing to pursue higher education through this pathway. However, the entrance examination for adult education is often a daunting challenge for many individuals, and it is important to be well-prepared in order to succeed.First and foremost, it is crucial to understand the format and content of the entrance examination. Typically, the exam will cover a range of subjects, including mathematics, English, and general knowledge. It is essential to familiarize oneself with the specific requirements of the exam and to allocate sufficient time for preparation. This may involve seeking out study materials, enrolling in preparatory courses, or forming study groups with fellow candidates.In addition to academic preparation, it is important to cultivate a positive mindset and a strong sense of determination. The journey of adult education can be challenging, and it is essential to approach the entrance examination with confidence and resilience. Setting realistic goals and maintaining a disciplined study schedule can help to build a solid foundation for success.Furthermore, time management is a key factor in preparing for the entrance examination. Many adult learners have to juggle their studies with work and family responsibilities, and it is important to allocate time effectively in order to balance these competing demands. Creating a study timetable and prioritizing tasks can help to ensure that sufficient time is dedicated to exam preparation.Moreover, seeking support from friends, family, and mentors can be invaluable during the preparation process. Surrounding oneself with a supportive network of individuals who believe in your potential can provide encouragement and motivation during challenging times. Additionally, seeking advice from individuals who have successfully navigated the adult education entrance examination can offer valuable insights and guidance.Finally, it is important to remember that success in the entrance examination is not solely determined by academic ability, but also by perseverance and determination. It is natural to encounter setbacks and obstacles along the way, but it is essential to remain focused on the end goal and to continue moving forward with determination and resilience.In conclusion, the adult education entrance examination is a significant milestone for individuals seeking to further their education. By understanding the format of the exam, cultivating a positive mindset, managing time effectively, seeking support, and maintaining determination, candidates can position themselves for success. I wish all of the candidates the best of luck in their preparations, and I am confident that with dedication and effort, each and every one of you can achieve your educational goals.Thank you. 。
学校介绍的英语作文翻译
学校介绍的英语作文翻译英文：School Introduction。
I would like to introduce my school to you. My schoolis located in a beautiful and peaceful neighborhood. It has a large campus with modern facilities and well-equipped classrooms. The school offers a wide range of subjects and extracurricular activities for students to choose from. The teachers here are very dedicated and passionate about education, and they always go the extra mile to help students succeed.In addition to academics, my school also places a strong emphasis on character development and personal growth. There are various leadership programs and community service opportunities for students to participate in. This not only helps students to become well-rounded individuals but also teaches them the value of giving back to thecommunity.Furthermore, my school has a vibrant and inclusive community. There are numerous clubs and organizations for students to join, such as sports teams, music ensembles, and cultural clubs. These provide students with the opportunity to make friends and pursue their interests outside of the classroom.Overall, my school is a place where students can thrive academically, socially, and personally. I am proud to be a part of such a supportive and nurturing learning environment.中文：学校介绍。
lecture 1
10/28/2016
• Another problem is my lack of self-control at the theater. I often stuff myself with unhealthy snacks. My choice might include a bucket of popcorn, a giant soda, or other junk-food. The worst problem is some of the other moviegoers. Kids run up and down the aisle; Teenagers laugh and shout at the screen; People of all ages drop soda cups and popcorn tubs, cough and burp, and talk to one another. All in all, I would rather stay home and wait to see the latest
State Your Point at First Thesis(or topic sentence)
a
Support your point wபைடு நூலகம்th evidence
series of reasons
Stated reasons
(followed by examples&details)
Illustrations, anecdotes, Experiences, facts, studies, Statistics, and the opinions Of experts
• Now write a paragraph to introduce yourself in about 10 to 15 minutes. • No length limit
大学英文翻译术语_专联译盟网
Shanghai Jiao Tong University
广西中医学院
Colleges of Traditional Chinese Medicine of Guangxi
上海海事大学
Shanghai Maritime University
山西中医学院
Colleges of Traditional Chinese Medicine of Shanxi
沈阳农业大学
Agricultural University of Shenyang
济南大学
University of Ji'nan
华南农业大学
Agricultural University of South China
吉首大学
University of Jishou
西南农业大学
Agricultural University of Southwest
上海师范大学
Shanghai Normal University
东华大学
Donghua University
上海戏剧学院
Shanghai Theatre Academy
东华理工学院
East China Institute of Technology
上海大学
Shanghai University
华东师范大学
Urban Construction Institutes of Tianjin
长江大学
Changjiang University
皖西学院
Western Anhui University
长沙理工大学
ChangshaUniversity
武汉音乐学院
山西专升本英语 作文模板
山西专升本英语作文模板英文回答：1. Introduction。
Higher education plays a pivotal role in shaping the lives of individuals and fostering their personal and professional development. As a student seeking to advance their academic journey through specialization, I am eager to embark on the path of higher education. I believe that pursuing a bachelor's degree is a critical step towards achieving my aspirations and contributing meaningfully to my field and society.2. Reasons for Pursuing Specialization。
My passion for specialization stems from my profound interest in a particular subject area. I am drawn to the intricacies and depth of knowledge that a specialized program offers. By delving into a specific field, I can notonly enhance my understanding but also develop advanced skills and expertise. This will enable me to become a valuable asset in my chosen profession and make meaningful contributions to my field of study.3. Benefits of Specialization。
学院介绍信模板英文
[Date][Recipient's Name][Recipient's Position][Institution/Company/Organization Name][Address][City, State, Zip Code]Subject: Introduction Letter for [Student's Name]Dear [Recipient's Name],I am writing to introduce [Student's Name], a highly motivated and academically talented student from our esteemed [Your College/Department Name] at [Your University Name]. [Student's Name] has successfully completed [Number of Years] years of undergraduate studies at our institution and is now seeking opportunities for further academic and professional growth.I am pleased to inform you that [Student's Name] has demonstrated exceptional skills and dedication throughout their academic journey at [Your University Name]. With a strong foundation in [Major/Field of Study], [Student's Name] has consistently achieved outstanding academic results, ranking among the top students in their class.[Student's Name] has a diverse skill set, which includes [List of relevant skills, such as technical skills, language proficiency, leadership abilities, etc.]. Their ability to adapt to new challenges and their proactive approach to learning have made them a valuable asset to our academic community. Here are some highlights of [Student's Name]'s academic and extracurricular achievements:1. [List any academic awards, scholarships, or honors received by the student, such as the Dean's List, national/international competitions, etc.]2. [Mention any significant research projects, publications, or presentations in which the student has been involved.]3. [Provide examples of the student's involvement in extracurricular activities, volunteer work, or community service.]4. [Describe any leadership roles or organizational positions held by the student.]In addition to their academic achievements, [Student's Name] has demonstrated exceptional personal qualities. They are known for their strong work ethic, commitment to excellence, and positive attitude. [Student's Name] is a team player and has the ability to workeffectively with others, making them an ideal candidate for [Recipient's Institution/Organization].As a testament to their dedication and potential, [Student's Name] has been accepted into [Recipient's Institution/Organization] for [Program Name], a [Degree Level] program that aligns perfectly with their academic interests and career goals. We are confident that [Student's Name] will excel in this program and contribute positively to the academic and cultural environment of [Recipient'sInstitution/Organization].We would greatly appreciate it if you would consider [Student's Name]for [Program Name] at [Recipient's Institution/Organization]. We believe that [Student's Name] will be an asset to your institution andcontribute to the continued excellence of your academic programs.Please feel free to contact me at [Your Contact Information] if you require any further information or have any questions regarding [Student's Name]. I am confident that [Student's Name] will make a significant impact on your institution and contribute to its ongoing success.Thank you for considering [Student's Name] for [Program Name] at [Recipient's Institution/Organization]. We are proud of their achievements and are confident that they will continue to excel in their academic and professional pursuits.Sincerely,[Your Name][Your Position][Your College/Department Name] [Your University Name][Your Contact Information] Enclosure: [Student's Resume/CV]。
魅力学校英语介绍信模板
[Your Position][Your School Name][School Address][City, State, Zip Code][Email Address][Phone Number][Date][Recipient's Name][Recipient's Position][Recipient's Organization][Recipient's Address][City, State, Zip Code]Dear [Recipient's Name],Subject: Introduction to [Your School Name] – A Haven of Learning and GrowthI am writing to introduce [Your School Name], an institution that has been at the forefront of educational excellence for many years. Nestled in the heart of [City], [Your School Name] has earned a reputation for its commitment to nurturing well-rounded individuals who are not only academically inclined but also socially responsible and culturally aware.Introduction to [Your School Name][Your School Name] was established in [Year of Establishment] with the vision of creating an educational environment that fosters innovation, critical thinking, and a lifelong love of learning. Over the years, we have grown from a small, intimate community to a vibrant, diverse school that serves students from various backgrounds and cultures.Academic ExcellenceAt [Your School Name], we pride ourselves on our rigorous academic programs. Our curriculum is designed to challenge students at every level, ensuring that they are well-prepared for the demands of higher education and the professional world. Our faculty, composed of dedicated educators with advanced degrees and extensive experience, are committed to providing individualized attention and support to every student.We offer a wide range of subjects, including:- Core Academic Subjects: Mathematics, Science, English Language Arts, Social Studies, and Foreign Languages.- Advanced Placement (AP) Courses: These rigorous courses provide students with the opportunity to earn college credit while still in high school.- Honors Courses: Designed for students who excel in their studies, these courses offer an enriched curriculum and prepare students for the challenges of college-level work.- Special Programs: We offer specialized programs in areas such as Engineering, Fine Arts, and Environmental Science, allowing students to pursue their passions and talents.extracurricular ActivitiesWe believe that education is not just about academic success but also about personal growth and development. That’s why [Your School Name] offers a rich array of extracurricular activities that cater to a wide range of interests and talents. Our students can participate in:- Sports: We have a strong athletic program with teams competing at various levels, including varsity, junior varsity, and freshman.- Clubs and Organizations: From academic clubs to cultural societies, our students have the opportunity to join groups that align with their interests and goals.- Arts: Our fine arts department offers a variety of opportunities for students to express themselves through music, drama, and visual arts.- Community Service: We encourage our students to engage in community service projects, helping them to develop empathy and a sense of social responsibility.Campus LifeOur campus is a welcoming and inclusive environment where students can thrive. We have state-of-the-art facilities that include:- Modern Classrooms: Equipped with the latest technology and resources, our classrooms provide an ideal learning environment.- Library: Our library is a hub of knowledge, offering a vast collection of books, periodicals, and online resources.- Science Labs: Our science labs are equipped with the latest equipment, allowing students to conduct experiments and explore scientific concepts.- Sports Facilities: Our sports facilities include a gymnasium, soccer fields, and basketball courts, ensuring that our students have access to a wide range of athletic activities.Admissions Process[Your School Name] is committed to attracting students who are passionate about learning and who will contribute positively to our school community. Our admissions process is designed to evaluate each applicant’s academic record, extracurricular activities, and personal qualities. We welcome students of all backgrounds and look forward to meeting prospective students and their families.ConclusionIn conclusion, [Your School Name] is a place where dreams are nurtured, and futures are shaped. Our commitment to excellence in education, combined with our vibrant campus life and dedicated faculty, makes us an ideal choice for students seeking a top-notch educational experience.I invite you to visit our school and see for yourself the magic that happens here. Should you have any questions or require further information, please do not hesitate to contact me at [Your Email Address] or [Your Phone Number].Thank you for considering [Your School Name] as a potential educational destination for your child. We look forward to the possibility of welcoming you and your family into our esteemed community.Warm regards,[Your Name][Your Position][Your School Name][Email Address][Phone Number]。
大学实训报告英语口语模板
---Introduction:- Good morning/afternoon, everyone. My name is [Your Name], and I am pleased to share with you my experiences and insights from my university practical training.- Today, I will be discussing the objectives of the training, the activities I engaged in, the challenges I faced, and the skills I acquired.Objective of the Training:- The primary goal of this practical training was to [mention the main objective, e.g., apply theoretical knowledge in a real-world setting, gain industry experience, or enhance specific skills].- I aimed to [state your personal objective, e.g., improve myproficiency in [specific skill or software], understand the dynamics of the [specific industry], or develop my problem-solving abilities].Training Duration and Location:- The practical training lasted for [duration, e.g., four weeks, two months] at [name of the company or institution].- During this period, I was based at [location, e.g., the company’s headquarters, a specific department, or a project site].Activities and Responsibilities:- I was involved in a variety of activities, including [list key activities, e.g., data analysis, market research, client meetings, or project development].- My responsibilities included [describe your specific duties, e.g., assisting in the development of [specific project], conducting interviews with [specific group], or managing [specific task or team]].Skills and Knowledge Acquired:- Through this training, I have significantly improved my [mentionskills and knowledge acquired, e.g., technical skills, communication skills, teamwork abilities, or time management skills].- I have also gained a deeper understanding of [mention any new concepts or industry practices learned].Challenges Faced:- One of the main challenges I encountered was [mention a challenge,e.g., adapting to a new work environment, dealing with unexpected issues, or managing tight deadlines].- To overcome this, I [describe how you addressed the challenge, e.g., sought guidance from mentors, used online resources, or collaboratedwith my peers].Reflections and Learning Outcomes:- Reflecting on my experience, I realize that [mention key insights or lessons learned, e.g., the importance of effective communication in a team setting, the value of adaptability in a dynamic work environment,or the significance of continuous learning].- This practical training has not only enhanced my skills but has also given me a clearer perspective on my career path and the industry I am passionate about.Feedback and Evaluation:- I received positive feedback from my supervisors and peers, who appreciated my [mention any specific contributions or qualities, e.g., dedication, creativity, or problem-solving skills].- The evaluation process involved [mention any assessments orevaluations conducted, e.g., performance reviews, self-assessments, or peer evaluations], which helped me identify areas for improvement.Conclusion:- In conclusion, my university practical training has been an invaluable experience that has equipped me with the necessary skills and knowledge to excel in my future career.- I am grateful to [mention any individuals or organizations that contributed to the training] for providing me with this opportunity, and I look forward to applying what I have learned in my future endeavors.---Thank you for your attention. I am now open to any questions you may have regarding my practical training experience.。
母校作文模板英语四级
母校作文模板英语四级My Alma Mater。
My alma mater, the hallowed institution where I spent the formative years of my intellectual and personal growth, holds a special place in my heart. It was within its hallowed halls that I embarked on a transformative journey that shaped not only my academic pursuits but also the trajectory of my life.A Nurturing Academic Environment。
From the moment I set foot on campus, I was immersed in an environment that fostered intellectual curiosity and critical thinking. Renowned professors, experts in their respective fields, guided me through rigorous coursework, challenging my assumptions and broadening my perspectives.I delved into the intricacies of literature, grappled with complex scientific theories, and engaged in lively debates that sparked my passion for lifelong learning.Beyond the classroom, numerous opportunities for research and collaboration enriched my academic experience.I joined research teams, presented my findings at conferences, and worked closely with mentors who nurtured my intellectual growth. The university provided me with access to state-of-the-art facilities, libraries brimming with knowledge, and a dedicated staff that supported my scholarly endeavors.A Vibrant and Inclusive Community。
城市学院英语课文翻译
Don't Wait Until Death Does Its PartWe have but one body. It must last a lifetime. Without it, life ends, and we are done and finished. But do we treat our body fairly, lovingly, like prized possessions? Do we appreciate our body's nonstop efforts to function smoothly?My body asks for little: water to keep hydrated; food for nutrients, energy, and strong bones; rest when I'm tired or sick; and play to lift my spirits. Its ability to self-repair and respond to good care is incredible.But until recently, I have abused my body with excesses of all kinds. Not only did I take its resiliency for granted, I was annoyed when a physical problem, such as a cold or injury, kept me from doing what I want. Moreover, I was harshly critical when it failed to conform to standards of beauty in the media. My overeating, lazy lifestyle, and excessive work had a negative impact on my life, though not fatal. I've also seen friends and family members destroy their body through drugs, alcoholism, or workaholism.For years I had good intentions to change, but I didn't follow through. I could see my future: increased medical expenses, exhausted senses, premature death. Once I understand that it is in my own self-interest to take care of it, I'm struggling to develop a positive relationship with my body. Evidently, I'm not the only one with this awareness now.I begin to make more constructive choices. Instead of asking the question, “What do I want?” I ask, “What does my body need?” And then I respond accordingly. Positi ve actions —exercising, eating mindfully, getting enough rest and water, limiting my work hours, and scheduling recreation —have gradually become regular habits rather than disciplined efforts.After all, each of us gets only one body. So don't wait until death does its part. Appreciate our body and treat it lovingly. It will reward us with a longer, healthier and happier life.不要坐等死忙伸出魔爪我们只有一个身体。
学校简介的翻译
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
晋中学院
本科毕业设计英文参考资料
题目（英文）
______________________
院系______________________
专业______________________
姓名______________________
学号______________________
学习年限年月至年月
指导教师职称
申请学位学士学位
年月日
TOPIC（三号，Times New Roman字体、加粗、居中、其前空一行）
Author’s Name:（×××小三号加粗、Times New Roman，字体居中)
1□☆☆☆☆☆（三号、Times New Roman加粗）
1.1□☆☆☆☆（四号、Times New Roman、加粗，序号后空1个字符）
1.1.1□☆☆☆（小四号、Times New Roman、加粗，序号后空1个字符）
□□☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆正文（正文段前空2个字符，内容小四号、Times New Roman）
（空一行）
2□☆☆☆☆☆（三号、Times New Roman加粗）
2.1□☆☆☆☆（四号、Times New Roman、加粗，序号后空1个字符）
2.1.1□☆☆☆（小四号、Times New Roman、加粗，序号后空1个字符）
□□☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆正文（正文段前空2个字符，内容小四号、Times New Roman）
页面设置：
页边距上下各2.75cm,左边距2.8cm,右边距2.5cm；行间距固定值为22磅。
正文开始标注页码：
位置：页面底端（页脚）；
对齐方式：放置在页面右下角（全部单面打印时）
Notes（小四号、Times New Roman、加粗,顶格，与正文之间空2行）
①(内容小四号Times New Roman顶格）
②
题目（三号、黑体，居中）
作者姓名：（×××小三号黑体，居中)
1□☆☆☆☆☆（三号、黑体、加粗、序号后空1个字符）
1.1□☆☆☆☆（四号、黑体、加粗、序号后空1个字符）
1.1.1□☆☆☆（小四号、宋体、加粗、序号后空1个字符）
1.1.1.1□☆☆☆（小四号、宋体、加粗、序号后空1个字符）
□□☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆正文（下方段前空2个字符，内容小四号、宋体）
（空一行）
2□☆☆☆☆☆（三号、黑体、加粗、序号后空1个字符）
2.1□☆☆☆☆（四号、黑体、加粗、序号后空1个字符）
□□☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆☆正文（下方段前空2个字符，内容小四号、宋体）
页面设置：
页边距上下各2.75cm,左边距2.8cm,右边距2.5cm；行间距固定值为22磅。
正文开始标注页码：
位置：页面底端（页脚）；
对齐方式：放置在页面右下角（全部单面打印时）
注释（四号、黑体、顶格，两字之间空1个字符，与正文之间空2行）
②
参考文献（四号、黑体、左对齐，与前空1行）
[1]内容小四号宋体顶格，格式参照《晋中学院本科毕业论文（设计）工作规定》
[2]。