天梭T~Touch使用说明书
141-en T-TOUCH EXPERT
Polar
Temperate
Arid
Tropical
Mediterranean
2 sec. or
Climate zone display
Setting mode
Select hemisphere: North = North, South = South not set = not set
Set the local climate: T = temperate; M = Mediterranean; A = arid; tr = tropical; P = polar
Validate setting
w ww. ti ss o t .c h
4/13
141_EN
T-TOUCH EXPERT
*
Setting > Standby
Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn.
*
T-TOUCH EXPERT User’s Manual
Acknowledgements
We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your T-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Weather, Altimeter, Chronograph, Compass, Alarm and Thermometer.
T-TOUCH SOLAR E84 用户手册说明书
T-TOUCH SOLAR E84 USER’S MANUALAcknowledgementsWe would like to thank you for choosing a TISSOTwatch, a Swiss brand among the most highly renownedin the world. Your T-TOUCH SOLAR E84 watch enjoysthe most recent technical innovations. It gives you aconstant analogue time display and a variety of digitaldisplays.In addition, the following functions can be accessedsimply by touching the glass: Meteo, Altimeter,Chronograph, Compass, Alarm and Countdown.Official service centers adresses&Recommended service priceswww.tissot.chTISSOT TACTILE WATCHES MUST ONLY BE SERVICED BY TISSOT’S AUTHORIZED CUSTOMERSERVICE CENTERS, WHICH ARE LOCATED IN OVER 160 COUNTRIESWARNINGIn Battery display mode, chargestate (see page 6)Touch-sensitive glass activeWater resistance: 10 bar (100 m / 330 ft)ML2016 accumulatorWeek number or day of the week display(see page 4)� other data may be displayed depend-4)� other data may be displayed depend-)� other data may be displayed depend-ing on the selected function.Refer to the functions for further detailsAzimuth heading settingdirection display (see page 15)FUNCTIONSActivating the touch-sensitive glassActivate glassWhen the glass is activated, thesymbol will flash on the digital display.If the glass is not touched, it will automatically deactivateafter 20 seconds.Exception: In time-setting mode, the glass will deactivateafter 60 seconds.Date display = Default displayTime 1: T1 displayTime 2: T2 displayBattery charge level display (see page 5)Options display (see page 6)DATE > SETTINGThe calendar is perpetual, i.e. the number of days per month is predefined. The date units are linked, so completing a full cycle of the months will move the year forward.BAT (BATTERY) > READING THE CHARGE LEVELIn this state, the watch can no longer operate correctly.All the functions are deactivated, except for time T1 and the date. The watch will enter energy saving mode (see page 9).The watch will need to be exposed to light to obtain sufficient charge to run normally.Battery drainedBattery flatThe watch is stopped.It automatically exits this state after prolonged exposure to light.The time and date must be reconfigured upon exiting this state .A micro-controller manages the watch's consumption and the battery charge state display. According to this state, it deactivates certain functions, or switches the watch to energy saving mode (see page 9).Note 1: The battery charge is checked periodically (1x/min), and continually when the light is activated.Note 2: You are advised to recharge the battery within a few days of the "bAt" symbol appearing.Note 3: When fully charged and used sparingly, the watch can operate for up to one year in a low-light environment.Battery charge timeThe table below indicates the charge time recommended for daily use.Exposure levelDaily use Sunlight outdoors7 minutes Sunlight through a window 16 minutes Daylight with cloudy sky 26 minutes Daylight indoors2 hours Fluorescent light indoors5 hoursNote: If the battery is completely flat, the watch must be exposed to light for at least 18 hours before it can be used.recharged by means of the solar cell.displayBattery at 1/3 charge Battery chargedBattery at 2/3 charge Battery drained or flatBAT (BATTERY) >GLOSSARYOPTIONS > READINGSETTINGThe watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions.The watch is desynchronised when its electric motor mechanism has been disrupted, by heavy impacts for example.NB: The glass must be active to access synchronisation mode.Synchronisation mode displayAL (ALARM) > WEEKEND DAYS SELECTIONThe alarm may be programmed to sound at the weekend or during the week only (see page 17). The days considered as the weekend mayhemisphere and climate zone to your geographic location. Select yourclimate zone according to the simplified Koeppen climate classification(see illustration on right).If the watch is not set ("Not Set"), the standard atmosphere modelis used: set temperature at sea level = 15°C, mean pressure at sea level:1013.25 hPaClimate zone display Setting mode Select hemisphere:nor =Northsou =Southnot =not setSet the local climate:tEM = temperate /MEd = Mediterranean /dRY = dry / tRO = tropical /POL = polarValidate settingNoteIt is not possible to select polarlocal climate for the SouthHemisphere.2 sec.or Polar Temperate Arid Tropical Mediterranean1 sec.1 sec.ECO (ENERGY SAVING MODE) > SETTINGThis mode is used to save the battery at night if the watch is not operated for one hour, when time T1 is between 22:00 and 5:00.The digital display is deactivated and the analogue display indicates time T1. The chrono or countdown are not stopped if theyare running. It is not possible to switch to energy saving mode from the Altimeter function.This mode economises the battery when the watch is not being worn.IMPORTANT: Calibrate the altitude or relative pressure by exiting standby mode, in order to obtain the correct altimetric and barometric values.Switch to standby mode after5 seconds Beep every secondBack to time & date modeb)/ : stop the count, the watchdoes not switch to standby mode.Activate standbymodeMETEO (WEATHER) > READINGIn meteo mode, the hands are superimposed to indicate the weather trend.The T-TOUCH SOLAR E84 program takes account of atmospheric pressure vari-ation over the last 6 hours to calculate the trend to indicate. Furthermore, thepressure variation caused by a rapid change in altitude is detected by the watchand compensated for automatically. So it only has a minimal impact on thebarometric trend.The T-TOUCH SOL AR E84 digital displayindicates the absolute and relative atmos-pheric pressure values in hectoPascals [hPa].Absolute atmospheric pressure is the actualpressure at the time and place of measure-ment, and cannot be altered. Relative pres-sure is a value relative to sea level, basedon local absolute atmospheric pressure.Barometers and weather charts show relative pressure values. The relativepressure value depends on the climate zone set, and can be preset on thewatch. The relative pressure presetting is in line with the altitude.Characteristics of functionMeasurement range: absolute pressure: 300 hPa to 1100 hParelative pressure: 950 hPa to 1100 hPaAccuracy: absolute pressure: ± 3 hParelative pressure: varies with altimeterResolution: 1 hPaUnit conversion: 1 hectoPascal [hPa] = 1 millibar [mb]Description of functionIn weather mode, the hands are superimposedto indicate the weather trend.Explanationsatmospheric pressure. When atmospheric pres-sure increases the sky clears. The area is thenreferred to as a "high pressure" area or "anticy-clone" (A). When atmospheric pressure decreas-es the sky clouds over. The area is then referredto as a "low pressure" area or "depression" (D).The T-TOUCH SOLAR E84 watch measures thesepressure variations and indicates the weatherthe weather developments:- 6’: Big pressure drop, rapid deterioration- 4’: M oderate pressure drop, probabledeterioration- 2’: S mall pressure drop, probable slightdeterioration12 o'clock: N o notable weather change+ 2’: S light pressure rise, probable slightimprovement+ 4’: M oderate pressure rise, probableimprovement+ 6’: Big pressure rise, rapid improvementALTIMETER > READINGThe altitude is displayed on the digital screen for 10 hours continuously. After 10 hours, altimeter mode is deactivated,and the date is displayed.The altitude unit system for displaying the altitude (m or ft) depends on the m/ft unit configuration in the options (see page 8).We advise you to stop the altitude difference meter during rest times and then restart it, in order to obtain more accurate results.Note 1: "Presetting" an altimeter means setting it to the actual altitude of a known point (see pre-setting procedure on page 11). The actual altitude values are indicated on various media: signposts, contour lines and spot heights on maps. The al-titude "presetting" is in line with relative atmos-pheric pressure.Note 2: In an airliner, since the cabin is pressurised, your altimeter will not indicate an accurate altitude.Note 3: To optimise the accuracy of your altimeter, you are advised to select the climate zone, see page 9.Characteristics of functionDescription of functionIn altimeter mode, your T-TOUCH SOL AR E84 be-comes a barometric altimeter, displaying the alti-tude relative to mean sea level.ExplanationsThis is a barometric instrument, which calculates the altitude as a function of absolute pressure (atmospheric). As the altitude rises, pressure drops, and vice versa. So the altimeter measures the difference between absolute pressure (atmos-pheric) and relative pressure (relative to sea level)to display the altitude. Your T-TOUCH SOLAR E84 is temperature compensated, and you can adjust your geographic location (hemisphere and climate zone). The altitude displayed is therefore corrected automatically.This makes it the ideal instrument for measuring vertical movement with the altitude difference function (e.g. in mountain trekking). The altitude difference meter indicates the elapsed time, cumulative altitude gains and losses and mean vertical speeds of ascent and descent.ALTIMETER > GLOSSARYMeasurement range – 400 m to +9000 m– 1333 ft to +29,500 ftAltimeter resolution 1 m3 ft Unit conversion1 metre [m] = 3.281 feet [ft] 1 foot [ft] = 0.305 metres [m]Altitude difference meter max. measurement time 99 days 23 hours 59 minutes 59 secondsMaximum altitude difference +/- 30,000 m+/- 99,000 ftAltitude difference meter resolution1 m 3 ft Maximum vertical speed 4999 m/min (appr. 300 km/h)16,401 ft/min (appr. 187.5 mph)Minimum vertical speed 5 m/min (appr. 0.3 km/h)16.4 ft/min (appr. 0.2 mph)Vertical speed resolution 1 m/min3 ft/min Minimum vertical movement 5 m 16 ft Minimum time of movement5 mins5 minsIMPORTANT: The stored data (lap times, see page 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 14) is erased when you start a chrono from zero. Only LAP or SPLIT ) is erased when you start a chrono from zero. Only LAP or SPLIT chrono times are memorised. To be able to select the LAP chrono function, the SPLIT chrono needs to be reset.Activate glass LAP CHRONO (LAP TIME) > READING STORED DATAAll times measured by the lap time chronograph function are stored, and can be displayed on the watch with the statistics for the total race time, and the fastest, slowest and average lap times. Maximum timing limit: 99 d 23 h 59 min 59 sec.Activate glass Use the push-buttons to browse through thelap timesevent. For example: measuring the finish time for several runners in a 100 metre sprint.IMPORTANT: The stored data (lap times, see page 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 13 or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT or split times, see page 14) is erased when you start a chrono from zero. Only LAP or SPLIT 14) is erased when you start a chrono from zero. Only LAP or SPLIT ) is erased when you start a chrono from zero. Only LAP or SPLIT chrono times are memorised. To be able to select the SPLIT chrono function, the LAP chrono needs to be reset.Activate glassSPLIT CHRONO (SPLIT TIMES) > READING STORED DATAAll the times measured by the split times function are stored, and can be displayed on the watch.Maximum timing limit: 99 d 23 h 59 min 59 sec.Activate glassUse the push-buttons to browsethrough the split timesNote 1: After 1 h, the hour indicator is displayedExample:Note 2: After 24 h, the hundredthsdisappear, and the days, hours, minutes and seconds are displayedExample: Exit stored data reading modeat any timeBack to split time chronoangle between 12 o'clock and the minute hand.AZIMUTH > READINGIn compass mode, your T-TOUCH enables you to define and follow an azimuth. To do so, you need only set the azimuth value and align theCompassIn compass mode, your T-TOUCH SOLAR E84 indicates the True North Pole, factoring in magnetic declination.Compass explanationsThe vertical lines (meridians) on the Earth converge at the True North Pole (Ng), indicating its direction. The hand of a conventional compass indicates the direction of the Magnetic North Pole (Nm). The angle (α) between these two directions Ng and Nm is known as magnetic declination. The magnetic declination value depends on your location on Earth. Furthermore, the Magnetic North Pole is constantly moving. So the magnet-ic declination value also depends on the date. If the correct magnetic declination value (for the location and date) is set (see the setting procedure on page 15), the minute hand of your T-TOUCH SOL AR E84 will point to True North(Ng). If the magnetic declination is set to 0, your T-TOUCH SOL AR E84 will point to Magnetic north (Nm). The magnetic declination values and dates are indicated on topographic charts, or can be found using special software avail-able on the Internet.For the whole world:/AzimuthIn azimuth mode, your T-TOUCH indicates the azimuth heading you should take.Azimuth explanationsThe azimuth is the horizontal angle between the direction of an object from 0° to 359° (e.g.: East = 90°). In azimuth mode, the T-TOUCH when the 6-12 o'clock axis of the watch is aligned with the azimuth heading set.12 o'clock represents the azimuth heading relative to True North.Note 1For a correct indication of North, it is extremely important to hold the watch as level as possible.Note 2The compass function, like any other compass, should not be used near a metal or magnetic object. In case of doubt, you can recalibrate your compass.Characteristics of function Accuracy: ± 8°Resolution: 2°COMPASS > GLOSSARYreached, you can stop the alarm by pressing one of the push-buttons.ALARM > SETTINGThe alarm can be programmed to sound every day, on week days or at the weekend only (see page 8).TIMER (COUNTDOWN) > SETTINGMeasurement range: 99 days 23h59’59’’zero, the watch switches to chronograph mode for the race.REGATTA > SETTINGRegatta countdowndisplayRegattaA regatta is a race between two or more boats, generally sailing boats.It comprises several stages, and begins with a "start procedure" which can last up to 10 minutes, during which all the boats competing in the regatta must remain behind the start line. As the boats are constantly moving behind this line, the goal is to remain as close as possible to it when the countdown ends, in order to gain the advantage from the off. Throughout the "start procedure", cannon shots tell the regatta competitors the time remaining before the start signal. To maximise your chances of a flying start, you can synchronise your T-TOUCH SOLAR E84 with the cannon shots.Once the countdown has finished, the race starts and all the competitors must follow a course marked by buoys around which they must navigate on their way to the finish line. The boat finishing the course first wins the regatta.Description of functionYour T-TOUCH SOLAR E84 is equipped with a special countdown for regattas, which can be set to a value of between 0 and 10 minutes, and used during the regatta "start procedure". The watch emits a triple beep at the end of every minute, a double beep every ten seconds during the last minute, a single beep for each of the last 9 seconds, and finally a quintuple beep announcing the start of the race when the countdown reaches zero.Furthermore, during the countdown you can synchronise your T-TOUCH SOLAR E84 with the cannon shots using the "-" push-button. It is synchronised to the nearest whole minute.When the countdown reaches zero, it automatically switches to a race chronograph, indicating the days, hours,minutes and seconds elapsed on the LCD screen.Fast continuous settingWhen setting the watch, you can press and hold the push-button to switch to fast continuous setting mode, in which the display moves at a faster rate than in non-continuous or normal speed setting mode. To exit fast continuous setting mode, you need to release the push-buttons for 1 second to continue in normal speed setting mode.SENSOR FAULT5 sec.When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor.Error: the display is clearedBack to time T1 displayIf this happens, please contact your retailer.WARNINGSBattery type: ML2016 accumulator.To activate the functions on your T-TOUCH SOL AR E84 a gentle press on the push-buttons or touch on the glass is all that is required. Excessive force may damage the watch.The brightness of the digital display decreases when the hands are in motion.TemperatureDo not expose your watch to sudden temperature changes (exposure to sunlight followed by immersion in cold water) or extreme temperatures (e.g. under a car windscreen in direct sunlight).Watch operating range:-5°C to +55°C / 23°F to 131°FThe T-TOUCH SOL AR E84 is water resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is not an instrument suitable for sports diving. You must not use the push-buttons when the watch is underwater. None of the functions can be activated if the glass is in contact with a liquid.A watch cannot be permanently guaranteed absolutely water-resistant. It may be affected by ageing of the gaskets or by an accidental impact on the watch. We recommend that you have your watch's water resistance checked once a year by an approved TISSOT ® service centre.CARE AND MAINTENANCEwww.tissot.ch 154_EN 21/21Do not expose your watch to intense magnetic fields such as those generated by speakers, mobile phones, computers, refrigerators or other electromagnetic appliances.Shocks and impactsAvoid thermal shocks or impacts, since they may harm your watch. In the event of a violent impact please have your watch checked by an approved TISSOT ® service centre.Harmful productsPrevent your watch from coming into any direct contact with solvents, detergents, perfumes, cosmetic products etc., since they may damage the bracelet, the case or the gaskets.CleaningWe would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and lukewarm soapy water. After immersion in salty water, rinse your watch in fresh water and leave it to dry completely.Like any precision instrument, a watch must be serviced regularly for optimum operation. As a general rule, we recommend that you have your watch checked every 3 to 4 years by your approved TISSOT ® retailer or service centre. However, please note that depending on the climate and the conditions of use of the watch, a shorter interval may be required. To benefit from the highest standards of ser-vice and to ensure your guarantee remains in force, please always contact an approved TISSOT ® retailer or service centre.Additional information in the "International Warranty – Service centres" booklet.Collection and treatment of end of life quartz watches*This symbol indicates that this product should not be disposed of as household waste. It must be returned to an approved collection point. By following this procedure you will contribute to safeguarding the environment and human health. Recycling the materials will help to conserve natural resources.* valid in European Community member states and in any countries with com-parable legislation.。
天梭手表G15系列用户手册说明书
*Chronographs G15User's ManualStandard modelHour hand Minute hand Seconds hand Date indicatorStandard chronograph:60-second counter hand 30-minute counter 1/10 second counter Retrograde model Hour hand Minute hand Seconds hand Date indicator Retrograde chronograph: 30-second retrograde counter hand 60-minute counter 5-minute retrograde counterCrown with 3 positions (8) :I Neutral position (screwed down*, not pulled out)II Setting position for date (unscrewed*, half pulled out)III Setting position for time (unscrewed*, completely pulled out)SettingsModels with a screwed down crown To ensure even better water-resistance, some models are fitted with a screwed down crown. Before setting the time or date, you must first unscrew the crown to position IB , before pulling it out to position II or III .Important : After each operation, you must always screw the crown back down to ensure that your watch remains water-resistant.Setting the time Pull the crown out to position III and turn it clockwise or anticlockwise to set the desired time. Synchronise the small seconds hand at the 6 o'clock position with an official time signal (radio/ TV/Internet) by pulling out the crown to the second notch; the hand will then stop. Once the time has been synchronised, push the crown back down into position I (and tighten it back down on models with a screwed down crown).Winding Quartz watches never need to be wound.Rapid date correction Pull the crown out to position II and turn it anticlockwise until the correct date is displayed.Speedometer (depending on the model)The speedometer is used to measure the speed of an object which is moving at a constant speed. Start the timing operation and stop it again once you have covered a distance of 1 km. The chronograph hand then points at a numeral on the tachometric scale, indicating the speed in km/h.AcknowledgementsThank you for choosing a chronograph from TISSOT ®, one of the most highly renowned Swiss brands in the world. Meticulously assembled using high quality materials and components, it is protected against impacts, temperature variations, water and dust.This manual applies to TISSOT ® standard and retrograde quartz chronographs with G15 movement. For the settings and operation of your chronograph, please refer to the instructions corresponding to your model.Your chronograph allows you to time events lasting up to 30 or 60* minutes, and offers you the following functions:– Standard chronograph START–STOP function– ADD function (partial times)– SPLIT function (intermediate times)To ensure that your chronograph operates with perfect precision for many years to come, we advise you to pay careful attention to the advice given in this manual.*Retrograde modelResetting the counters (standard model)The counters must be reset before starting timing. If necessary, proceed as follows:• Reset the 30-minute counter hand:- Crown in position II , push-piece B• Reset the 60-second counter hand:- Crown in position III , push-piece A• Reset the 1/10 second counter hand:- Crown in position III , push-piece B Resetting the counters (retrograde model)The counters must be reset before starting timing. If necessary, proceed as follows:1 Reset the 60-minute counter hand:- Crown in position II , push-piece B 2 Reset the 30-second retrograde counter hand:- Crown in position III , push-piece A 3 Reset the 5-minute retrograde counter hand:- Crown in position III , push-piece BSimple timingThe "simple timing" function enables you to measure isolated events.1START2STOPTime readout (as per example above)- 5 minutes,- 57 seconds,- 7/10ths of a second3ResetNB: Before each timing operation, the chronograph hands must be at their start points. If necessary, refer tothe RESETTING THE COUNTERS paragraph.Notes : All the timing functions are available with the crown pressed into position I.On the Retrograde model, the "simple timing" function is no different from that on a standard chronograph, but the retrograde counter hand turns anticlockwise, from 9 o' clock to 3 o'clock.ADD functionThe ADD function enables you to measure consecutive events without having to reset in between. Each timeis added to the previous total.1START2 STOP Readout3RESTART4 STOP Readout5RESTART6 STOP ReadoutX Reset countersSPLIT-TIME functionThe SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting timing. When you restart, the chronograph hands "catch up" to the ongoing elapsed time.1START2SPLIT 1Time 1 readout (as per fig. 2)- 5 minutes,- 4 seconds,- 6/10ths of a second3RESTART (catchup)4SPLIT 2Time 2 readout- 15 minutes,- 36 seconds,- 8/10ths of a second5 RESTART (catchup)6STOPFinal time readout (cumulative time)- 25 minutes,- 18 seconds,- 4/10ths of a second7 Reset countersCare and maintenanceWe would advise you to clean your chronograph regularly (except for the leather strap) using a soft cloth and lukewarm soapy water. After immersion in salt water, rinse it in fresh water and leave it to dry completely.Do not leave it anywhere subjected to high variations in temperature or humidity, direct sunlight or strong magnetic fields.We would advise you to have your watch inspected every 3 to 4 years by an approved TISSOT® representative or retailer. To enjoy impeccable maintenance service and ensure the guarantee remains valid, always consult an authorised TISSOT® representative or retailer.TISSOT®quartz chronographs have the incomparable precision of quartz. Their power reserve is usually more than 2 years in continuous use. If you plan not to wear your chronograph for several weeks or months, we would advise you to store it with the crown pulled out to position III. This cuts the electrical power supply to the motor, thereby extending battery life considerably.Replacing the batteryOnce the battery has been drained, it must be replaced without delay by an approved TISSOT® representative or retailer.Battery type: button-type zinc-silver oxide primary battery cell, 1.55 V Battery, No. 394, SR 936 SW.Collection and treatment of end of life quartz watches*This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By following this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve natural resources.* valid in the EU member states and in any countries with corresponding legislation.。
天梭表说明书-中文
We would like to thank you for choosing a TISSOTwatch, a Swiss brand among the most highly renownedin the world. Your T-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays.In addition, the following functions can be accessed simply by touching the glass: Weather, Altimeter, Chronograph, Compass, Alarm and Thermometer.T-TOUCH EXPERT User’s Manual*天气、高度、秒表、指南针、 闹钟、温度等功能。
感谢感谢您选择享誉世界的瑞士名表：天梭表 T-touch表具有最新的技术创新，呈现给您持久的指针时间显示和各种不同的数字显示。
值得一提的是，下属功能都可以通过简单的触摸屏幕获得：Active touch-sensitive glass触摸屏激活显示标志上图中，各小图标解释：（表示页码），以下相同第3页setting > tiMes t & t2setting >DAtePressing and holding or will move the hands forward or backward. After a full revolution, the minutes hand will stop and the hourhand advances/reverses in steps of one hour. time t2 is set in steps of 15 minutes.Activate glass Time t or t2 display(example: T): forward 1 min.: back 1 min.(hands and display)Activate glass Date displaythe calendar is perpetual, i.e. the number of days per month is predefined. in continuous setting, the days scroll past slowly at first, and thenquicker. After a full month, the calendar scrolls in months, and then likewise in years.1 sec.1 sec.2 sec.: forward one day:back one dayActivating thetouch-sensitive glass Activating the light setting modeselect a functionTouch one of the 7 touch-sensitive areasof the glass to activate thecorresponding function.Display modeWhen the glass is activated, thesymbol will flash on the digitaldisplay.If the glass is not touched,it will automatically deactivate after15 seconds.exception: In compass and altitudedifference meter mode, the glass willdeactivate after 30 seconds2 sec.Default display:move display and/or handposition forward:move display and/or handposition backwardIf no manipulation for10 seconds, the setting modeis deactivated.The display light will stay onfor 5 seconds.Return toDate display一般使用信息表发出嘀一声触摸屏激活时，数字显示屏上显示T标志不触摸屏幕，屏幕会在15秒后自动处于非激活状态，在指南针和高度计状态，触摸屏在30秒后处于非激活状态激活亮灯按压2秒表发出嘀声亮灯持续亮秒选择功能触摸表盘上的7处触摸位置激活相应功能设定模式表发出嘀声+：向前调整-：向后调整10秒内无操作，自动退出设置功能显示模式激活显示屏返回日期显示设置>时间1和时间2按压+或-向前或向后移动指针，旋转一圈后，分针停止，时针转动一个小时，时间2只能按15分钟间隔设置激活触摸屏点击中央区域时间或时间2显示按压+按钮2秒进入设置模式+：向前调整1秒-：向后调整1秒设置>日期激活显示屏点击中央区域日期显示进入设置模式-：向后一天units displaysetting > units setting > BeeP Select mode 12/24 hours – in 12 hour mode, the letter A (AM) or P (PM) appears be-tween minutes and seconds when setting the timeBeep displaysetting modeDeactivating the sound silences adjustment beeps but not the alarms.Activate glassoptions display (see page 3)Switch to sub-menus:units displayAutomatic switch to standby mode after5 seconds Beep every secondBack to units displayAt any time: exit sub-menu – back to date displayclimate zone displayBeep display1 sec.按如图操作，激活显示屏按如图操作，其它选项显示按如图操作，进入子菜单，显示单位按如图操作， 鸣叫模式显示按如图操作，5秒钟后自动进入 待机模式，每秒钟鸣叫一次按如图操作 显示气候区按如图操作，返回 单位显示任何时候点击中间按钮，退出子菜单，返回日期显示设置>单位按如图所示操作， 在单位显示时按+按钮2秒，进入 设置模式按+按钮，选择使用12或24小时模式， 在12小时模式，在分和秒之间会显示 A或P字母，分别代表上午和下午按如图操作，完成设置在12小时模式时，日期按月天年 显示，在24小时模式时，日期按天月 年显示设置鸣叫模式按如图操作，进入鸣叫模式按如图操作，进入设置模式按压+或-按钮，激活或关闭鸣叫模式关闭鸣叫模式不会关闭闹钟的鸣叫setting > heMisPheRe AnD cliMAte zoneto get the best from the altimeter function, it is possible to adjust thehemisphere and climate zone to your geographic location. select yourclimate zone according to the simplified Koeppen climate classification(see illustration on right).if the watch is not set ("no set"), the standard atmosphere model is used: settemperature at sea level = 15°c, mean pressure at sea level: 1013.25 hPaclimate zone display setting mode Select hemisphere:north =North,south =Southnot set =not setTemperate Mediterraneanstandby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated.this mode economises the battery when the watch is not being worn.Back to time & date modeb) / : stop the count,the watch does not switch to standby modea) The watch is in standbyAutomatic switch to standbymode after 10 secondsBeep every secondBack to time & date modeor设置>待机模式待机模式是一种省电模式，除了更新时间，所有的功能均关闭鸣叫10秒后，该表自动进入待机模式表处于待机模式点击中间按钮，返回时间日期模式按+或-按钮，表不进入待机模式返回日期时间模式设置>所处地球半球和气候区设置为了更好的实现高度显示功能，应当设置所处半球和时区如果没有设置，缺省使用1013.25hPa，可按右图设置，图中颜色代表如下：地中海按如图操作，显示时区按+按钮2秒，进入设置模式选择所处半球：North北半球South南半球not set 不设置WeAtheRActivate glassRelative pressure display in hPa: up one hectopascal : down one hectopascalValidate settingsetting this pressure changes the altitude displayed. the possible relative pressure is deliberately limited between 950 hPa and 1100 hPa.Absolute pressure display in hPasetting > RelAtive PRessuRe PResetting 1 sec.in weather mode, the hands are superimposed to indicate the weather trend.or if they are not correctly superimposed when accessing the functions.the watch is desynchronised when its electric motor’s mechanism is disturbed due to heavy impacts for example. n.B.: the glass must be active to access the synchronisation mode.units displaysynchronisation setting mode The hands should beperfectlysuperimposed in the 12 o'clock positionsynchronised Desynchronised表针和数字显示同步表针和数字显示不同步表针和数字显示不同步时，需要校正两者同步按如图操作，显示 单位按中间按钮5秒，进入同步模式 表针应当精确重叠在12点位置天气在天气模式下，表针重叠以指示天气趋势激活显示屏按图中操作，显示相对压力按图中操作，显示绝对压力设置>相对压力预设设置该压力会改变高度显示。
天梭码表使用说明书T17.1.586.52
*调节与使用方法这款的三根马表针停放的位置都是可以调整的，需要配合中间的表把旋出后再拔出。
然后配合上下两个摁钮来调节。
首先将中间的表把往下旋转，旋到一定程度，就可拔出，拔出一节时，摁下上方的钮就能调整1/10秒的短黄针的停放位置。
拔出一节时，摁下下方的摁钮长的黄马表秒针就能调整。
然后中间的那个表把拔出第二节的时候，摁上方的摁钮就能调整30分钟计时的短黄针了，全部调整成正朝上方就可以了。
完之后一定要记得将中间的表把摁进两格后，再旋转进去旋紧。
这款表长的那根黄针和表盘上方的左右两个小表盘的短针，这三根针为马表计时针。
正常情况下，这三根都是静止不动的，它们的停止位置都应该是各自表盘的正上方。
当想用马表功能的时候，摁下表右方的三个摁钮中最上方的钮一下，这时黄色长针开始走，当想结束本次计时的时候，再摁最上方的钮就停止了。
这时观察三根马表针分别处的位置，例如：左边的短针走了4格，长黄针停在15格处，右边的短黄针停在8格处。
即代表，这段计时时间为：4分15.8秒，这时再摁下最下方的钮，三根计时针归零，回到各自表盘的正上方。
测速计使用方法一般带秒表功能的手表外圈会刻有500/400/350等依次减小的数字，这些代表的物理量为速度，单位为公里/小时，这个表圈称为TACHYMETER(测速计)。
在高速公路上行驶的车辆，因为高速公路上一般竖有距离指示标杆，当经过起始点时启动秒表，秒表针从12点开始计时，当移动1公里时候，停止计时，此刻针所指的数字就是前一公里的平价速度。
譬如在12点位置有60，因为一分钟走了1公里，那么速度就是60公里/小时。
表圈上数字对应的位置是怎么推算出来的呢？例如要知道500这个数字应该刻在那个位置？那么需要做个简单的除法，即演算在500公里/小时的速度下行驶1公里需要多少时间，单位为秒。
计算公式 ：1小时=3600秒，那么500公里需要3600秒完成，根据等比原则，1公里需要的时间就是3600/500=7.2秒，所以500一定是刻在表盘的7.2秒处。
Tissot Heritage Visodate Automatic 使用手册说明书
*www.tissot.ch157_EN / 11.161/3Analogue MechanicalWatchesUser’s ManualDisplay and functionsSeconds hand Minute hand Hour hand Date* Day** According to modelQuesto manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Tissot Heritage Visodate Automatic T0194301603101 o cerca il tuo prodotto tra le migliori offerte di Orologi da Polsowww.tissot.ch157_EN / 11.162/3CongratulationsWe congratulate you on choosing a T ISSOT ® watch, a Swiss brand among the most highly renowned in the world. Meticulously designed, using only the highest quality materials and components, your watch is protected against shocks and impacts, variations in temperature, water and dust.To ensure that your watch operates with perfect precision for many years to come, we recommend that you pay careful attention to the advice provided hereafter.T his user manual applies to all TISSOT ® mech anical watch es (hand-wound or automatic). Please refer to the explanations relating specifically to your watch model.WindingModels with screwed crownTo ensure even better water resistance, certain models are fitted with a screwed crown. Before setting the time, winding or setting the date* or day*, you must first unscrew the crown into position IB .Important: After every operation, th e crown must be screwed back in to maintain the water-resistance of the watch.Hand-wound mechanical watchesHand-wound watches must be wound regularly by hand in order to remain in continuous operation (e.g. every morning before putting the watch on your wrist). To do so, pull the crown into position I and turn it forward until it locks. The power reserve of fully wound mechanical movements varies from 36 to 80 hours, depending on the models. Automatic mechanical watchesYour watch must be wound manually if it has stopped or not been worn for several days, in order to ensure that your watch remains in continuous operation during periods of low activity (e.g. during sleep). In these cases, turn the crown through 30 revolutions forward or backward, depending on the model, in position I . The automatic winding system will then ensure that the movement is fully wound if the watch is on your wrist. It is also possible to fully wind an automatic watch manually by means of the winding crown. However, please note that automatic movements have a slipping spring, which disengages the winding system (the crown can be turned infinitely) once the movement has been fully wound. Generally speaking, 80 revolutions of the crown are enough to fully wind most automatic mechanical watches.The efficiency of the automatic winding system of a mechanical movement depends on th e wrist movements of th e person wearing th e watch. Do not deliberately sh ake your automatic watch to wind it; this has no effect and could damage the watch.SettingsNB: Please take account of the information above if your watch is fitted with a screwed crown.Setting the timePull the crown out to position III and turn it in either direction until the desired time is displayed.On certain models with a seconds hand, you can synchronize it with an official time signal (radio/ TV/Internet). When the crown is pulled out to position III , the seconds hand is stopped. Once the time is synchronised, push the crown back into position I (and screw it back in on models with a screwed crown).Note: certain calibres do not have a “stop seconds” mechanism. To synchronise them, you need to turn the crown backward slightly and hold back the tension, thereby stopping the seconds hand. You then need only release the tension when the display matches the time signal. Rapid correction of the date* and day*NB: Do not perform a rapid date correction between 22:00 and 02:00.Pull the crown out to position II and turn it clockwise until the desired date is displayed, or counterclockwise to correct the day. During this operation, your watch will keep operating, so you will not need to adjust the time.Technical informationPower reserveTISSOT ® Automatic watches draw their energy from an oscillating weight which is activated in response to the natural movements of your wrist. This weight keeps the watch wound. Automatic watches do not need a battery. Depending on the model, the power reserve varies from 36 to 80 hours.AccuracyT he accuracy of a mechanical watch depends on the movements and habits of the person wearing it, and so it can vary. A T ISSOT ® qualified watchmaker can adjust the accuracy of a watch within the T ISSOT ® tolerance thresholds. Most watches which are not certified chronometers have an average accuracy tolerance of around -10/+30 seconds per day.A chronometer is a precision mechanical watch which has obtained an official certificate issued by COSC (Contrôle Officiel Suisse des Chronomètres), after its movement has passed several accuracy tests in various positions and at various temperatures, as well as water-resistance tests performed in the laboratory for 15 days and 15 nights. T o be awarded the title of chronometer, the average accuracy of a mechanical movement must be between -4/+6 seconds per day.Water-resistanceTISSOT ® watches are designed to withstand a pressure of up to 3 bar (30 m / 100 ft), 5 bar (50 m / 165 ft), 10 bar (100 m / 330 ft), 20 bar (200 m / 660 ft) or 30 bar (300 m / 1000 ft), depending on the information shown on the case-back.A watch cannot be permanently guaranteed absolutely water-resistant. It may be affected by ageing of the gaskets or by an accidental impact on the watch. We recommend that you have your watch’s water resistance checked once a year by an approved TISSOT ® service centre.Care and maintenanceTemperatureDo not expose your watch to sudden temperature changes (exposure to sunlight followed by immersion in cold water) or extreme temperatures (over 60°C (140°F) or below 0°C (32°F)).Magnetic fieldsDo not expose your watch to intense magnetic fields such as those generated by loudspeakers, mobile phones, computers, refrigerators or other electromagnetic appliances.Shocks and impactsAvoid thermal shocks or impacts, since they may harm your watch. In the event of a violent impact please have your watch checked by an approved TISSOT ® service centre.www.tissot.ch157_EN / 11.163/3Harmful productsPrevent your watch from coming into any direct contact with solvents, detergents, perfumes, cosmetic products etc., since they may damage the bracelet, the case or the gaskets.CleaningWe would advise you to clean your watch regularly (except for the leather strap) using a soft cloth and lukewarm soapy water. After immersion in salty water, rinse your watch in fresh water and leave it to dry completely.ServicesLike any precision instrument, a watch must be serviced regularly for optimum operation. As a general rule, we recommend that you have your watch checked every 3 to 4 years by your approved T ISSOT ® retailer or service centre. However, please note that depending on the climate and the conditions of use of the watch, a shorter interval may be required. To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSOT ® retailer or service centre.Availability of spare partsFrom the stoppage date of the watch production, TISSOT ® guarantees the availability of its spare parts for a minimum period of 10 years for standard watches, and for a period of up to 20 years for gold watches. If for any reason production of a particular spare part is stopped or deferred, TISSOT ® reserves the right, at its sole discretion, to offer the customer an alternative solution.。
Tissot天梭推出航海表 Sailing Touch
Tissot天梭推出航海表 Sailing Touch
隻需触摸表盘，水手现在可以面对任何天气情况。
Sailing Touch是一台非常有用的仪器，可以通过六小时前的综合直方图和测量的相对气压来检查天气情况。
它还配备了一个计算器，预示目的地港口的潮汐情况。
但这还不是全部！这台强大的有触觉的仪器的倒计时功能对帆船是必不可少的，在比赛开始前关键的十分鐘时通过嗶嗶声和数字发出提示。
令人印象深刻的功能范围还包括一个测量一定距离的速度的机制，指南针，两个闹鐘，两个时区，万年歷和背部照明。
Tissot 1853 手表说明书
Tissot 1853 watch not working. How do you change the time on a tissot 1853. Tissot 1853 not working.
w w w.t iss ot .c h 106-eng.anual Displays and functions Hour hand Minute hand 24 hour hand Internal bezel External bezel Setting crown 1 * TISSOT 1853 1/2 3.10.2003, 11:22 1 06_ E / 1 0.
03 ( 613 relevant results, with Ads Sellers looking to grow their business and reach more interested buyers can use Etsy’s advertising platform to promote their items. You’ll see ad results based on factors like relevancy, and the amount sellers pay per click. Learn more. ) The Tissot user's manual give information about the use, the settings and the maintenance of the different Tissot watches. Download your user's manual : User's manuals Tissot watches bought from an authorised retailer are covered by a 24 month sales warranty as per below conditions, downloadable in PDF format. A warranty card, properly filled in by the point of sale, is provided and specify the activation date of the warranty.
QLOCKTWO TOUCH 使用说明书
享受时光1.3 位置重要说明 请注意以下事项，以免造成物品损坏：■请勿在湿度较高的房间（例如浴室）内使用时钟。
■确保将时钟摆放在儿童和动物触及不到的位置。
■选择坚固、防滑、结实的表面。
■请勿将时钟直接放在硬盘、电脑、手机、信用卡或其 他对磁体敏感的电子元件上或其附近。
■将您的 QLOCKTWO TOUCH 放在适当的位置， 以免在发生意外碰撞或拉动电缆时掉落。
■避免直接的热辐射，例如来自散热器的热量。
■避免阳光直射。
1.4 清洁警告 抛光布和溶剂（例如松节油或苯）以及含醇的清洁剂（例如酒精）可能会损坏表面。
面板以磁性方式固定，进行清洁时应将其取下来: >小心地从外壳中拉出面板。
>将面板放在干净的水平面上进行清洁。
>清洁干净后将面板准确地装回到外壳的前部。
白色外壳，防紫外线（QLOCKTWO TOUCH PURE ）:用提供的超细纤维布，略微沾湿后擦拭污渍。
亚克力玻璃面板 (QOLOR )： ■用超细纤维布清除轻微污垢（供货随附）。
■用合适的亚克力玻璃清洁剂或者用软布和含有少许洗碗机用清洁剂的水清除顽垢。
拉丝不锈钢面板（FULL METAL 全金属）： ■用超细纤维布清除轻微污垢（供货随附）。
■用合适的不锈钢清洁剂清除顽垢。
表面涂层的不锈钢面板（DEEP BLACK, GOLDEN LEGEND 深黑色、经典金色）：使用说明书请仔细阅读说明书，以便安全使用 QLOCKTWO TOUCH ， 确保其拥有长使用寿命，并将其放置在安全的地方。
此外，也可在线获得使用说明书： > Information1. 安全说明1.1 发货内容开箱并检查发货内容。
如果有零件缺少或损坏，请联系您的经销商。
发货内容：■带可更换面板的 QLOCKTWO TOUCH ■仅限底座 ■自粘保护条 ■3 米 USB 电缆 ■5 V USB 电源 ■超细纤维布1.2 运输和存放重要说明 请注意以下事项，以免造成物品损坏：■使用原包装■避免在运输过程中发生碰撞、摇晃和振动。
天梭触摸表
天梭触摸表
天梭是瑞士著名的高档手表品牌，它的触摸表更是在手表结构、功能、外观等方面做出了许多极富创意和实用性的改进。
从外观上看，天梭触摸表更注重简洁和时尚感，它的设计风格以简单大方为主，流畅的线条优美而舒适，表带可根据个人需要轻松调整大小，戴着非常舒适。
其金属表盘菱形纹理的设计使表盘在不同光线下的变化更加优雅，表圈上的数字在暗光环境下发光，更方便夜间阅读时间。
搭载的触摸屏幕设计也使其使用更加简单、快捷。
此外，天梭触摸表还拥有许多实用的功能，如多时区显示、天气预报、闹钟、计时器、定时器、步数、海拔高度、气压、指南针等功能，足以满足人们在日常生活中的使用需求和户外运动爱好者的需求。
天梭触摸表的定位是高端手表市场，其价格也较为昂贵。
但相对于其高品质、高档次的品牌形象以及丰富的功能，它的价格也是合理的。
值得一提的是，天梭触摸表不仅拥有卓越的手表品质，还以“创新、经典、精准”为品牌理念，每一枚手表都具有独特的魅力和风格，使得人们能够更好地享受时间和生活的美好。
总之，天梭触摸表在外观、品质、功能等方面都展现出了其独特的魅力和价值，它是一枚功能齐全、质量上乘、造型优美、使用方便的手表，能够满足人们对于高端手表的品质和
性能的追求，也能够满足人们对于时尚、实用、品牌的多种需求，是一款非常值得拥有的高档手表。