外贸是销售合同范本(英文版)
外贸销售合同样本中英文6篇
外贸销售合同样本中英文6篇篇1International Sales ContractThis International Sales Contract is entered into on [date], by and between:Seller: [Name of Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address], represented by [Name of Representative], (hereinafter referred to as the "Seller");AndBuyer: [Name of Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address], represented by [Name of Representative], (hereinafter referred to as the "Buyer");Hereinafter collectively referred to as the "Parties".WHEREAS, the Seller is engaged in the business of manufacturing and selling [description of products]; andWHEREAS, the Buyer desires to purchase [description of products] from the Seller for resale in [Country] and the Seller agrees to sell such products to the Buyer;NOW, THEREFORE, in consideration of the mutual agreements contained herein, the Parties agree as follows:1. Product Description: The Seller agrees to sell and the Buyer agrees to purchase [description of products] in accordance with the terms and conditions of this Contract.2. Quantity: The quantity of the products to be purchased from the Seller shall be [quantity] units, unless otherwise agreed upon by the Parties.3. Price: The price per unit of the products shall be [price] USD, subject to adjustment as provided in this Contract.4. Payment Terms: Payment shall be made by the Buyer to the Seller in [currency] in the following manner: [payment terms].5. Delivery: The Seller shall deliver the products to the Buyer at [delivery location] within [delivery time frame] days from the date of this Contract.6. Inspection: The Buyer shall have the right to inspect the products upon delivery and reject any products that do not meet the specifications set forth in this Contract.7. Warranty: The Seller warrants that the products sold under this Contract shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first written above.Seller:Name:Title:Buyer:Name:Title:This International Sales Contract is hereby accepted and agreed to by the Parties as indicated by their signatures below:Signature of Seller: ______________________________Signature of Buyer: ______________________________Date: ______________________________篇2International Sales ContractParties to the ContractSeller: [Company Name]Address: [Company Address]Contact person: [Contact Person]Telephone: [Contact Number]Email: [Email Address]Buyer: [Company Name]Address: [Company Address]Contact person: [Contact Person]Telephone: [Contact Number]Email: [Email Address]Details of GoodsDescription: [Detailed description of goods] Quantity: [Number of units]Unit Price: [Price per unit]Total Price: [Total price of goods]Delivery TermsDelivery Deadline: [Date]Delivery Location: [Address]Delivery Method: [Method of transportation]Payment TermsPayment Method: [Method of payment]Payment Deadline: [Date]Currency: [Currency]Quality ControlAll goods must meet the required quality standards as specified in the contract. The Buyer has the right to inspect the goods upon delivery and reject any defective products.Force MajeureIf either party is unable to fulfill their obligations under this contract due to force majeure events such as natural disasters, strikes, or government regulations, they are not liable for damages.ConfidentialityBoth parties agree to keep all information related to this contract confidential and not disclose it to third parties without consent.Dispute ResolutionAny disputes arising from this contract will be resolved through negotiation between the parties. If no agreement can be reached, the matter will be referred to arbitration.SignaturesSeller: ________________________ Date: _______________Buyer: ________________________ Date: _______________This contract is legally binding upon signing by both parties.Note: This is a sample contract and may need to be customized according to the specific requirements of the parties involved.篇3International Sales ContractThis International Sales Contract is made and entered into on [date], by and between [Company A], located at [address],hereinafter referred to as the "Seller", and [Company B], located at [address], hereinafter referred to as the "Buyer".WHEREAS, the Seller is engaged in the business of manufacturing and selling [products], and the Buyer is interested in purchasing said [products];NOW, THEREFORE, in consideration of the mutual covenants and agreements herein contained, the parties hereto agree as follows:1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1 description]- [Product 2 description]- [Product 3 description]2. Quantity and PriceThe quantity to be purchased shall be [quantity] of each product at the price of [price] per unit. The total purchase price shall be [total amount].3. Payment TermsThe Buyer shall make payment by [payment method] on [payment schedule].4. Delivery TermsThe Seller shall deliver the products to the Buyer's designated location at the Buyer's expense. The delivery date shall be on or before [delivery date].5. Inspection and AcceptanceThe Buyer shall have [number of days] days from the date of delivery to inspect and accept the products. Any defects ornon-conformities must be reported in writing to the Seller within said period.6. WarrantyThe Seller warrants that the products shall be free from defects in materials and workmanship for a period of [warranty period]. If any defects are found within said period, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.SELLER: [Company A]By: _______________________Print Name: ________________Title: ______________________BUYER: [Company B]By: _______________________Print Name: ________________Title: ______________________This International Sales Contract shall become effective upon the signing by both parties.篇4International Sales ContractThis International Sales Contract ("Contract") shall be made and entered into as of [Date], by and between:Seller: [Name of Seller] (hereinafter referred to as "Seller")Address: [Address of Seller]Telephone: [Phone Number of Seller]Email: [Email Address of Seller]Buyer: [Name of Buyer] (hereinafter referred to as "Buyer")Address: [Address of Buyer]Telephone: [Phone Number of Buyer]Email: [Email Address of Buyer]WHEREAS, Seller is engaged in the business of exporting goods internationally; andWHEREAS, Buyer desires to purchase and import the goods from Seller; andNOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties agree as follows:1. Sale of Goods: Seller agrees to sell and deliver to Buyer the following goods:Description of Goods: [Description]Quantity: [Quantity]Unit Price: [Price]2. Delivery: Seller shall deliver the goods to the address specified by Buyer no later than [Delivery Date].3. Payment: Buyer shall pay Seller the total amount of [Total Amount] within [Number] days of receipt of the goods.4. Inspection and Acceptance: Buyer shall inspect the goods upon delivery and shall notify Seller in writing of any defects or discrepancies within [Number] days of receipt.5. Title and Risk of Loss: Title to the goods shall pass to Buyer upon delivery. Risk of loss shall pass to Buyer upon delivery.6. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution: Any disputes arising under this Contract shall be resolved by arbitration in [City], [Country] in accordance with the rules of [Arbitration Organization].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Signature: _______________________________Print Name: _______________________________Buyer:Signature: _______________________________Print Name: _______________________________This Contract is made and entered into as of the date first above written.[Date]【外贸销售合同样本-英文】国际销售合同本国际销售合同（“合同”）应于【日期】之日起生效，并由如下双方达成一致：卖方：【卖方名称】（以下简称“卖方”）地址：【卖方地址】电话：【卖方电话】电子邮件：【卖方邮箱】买方：【买方名称】（以下简称“买方”）地址：【买方地址】电话：【买方电话】电子邮件：【买方邮箱】鉴于，卖方从事国际商品出口业务；以及鉴于，买方希望从卖方购买并进口商品；以及现在，因此，考虑到本合同中包含的双方协议与约定，各方同意如下：1. 商品销售：卖方同意销售并交付以下商品给买方：商品描述：【描述】数量：【数量】单价：【价格】2. 交付：卖方应在【交付日期】之前将商品交付至买方指定的地址。
中英文外贸销售合同范本3篇
中英文外贸销售合同范本3篇篇1Export Sales ContractThis Export Sales Contract is entered into on [Date] between [Exporter Company], a company registered in [Country] with registered address at [Address] (hereinafter referred to as the "Exporter"), and [Importer Company], a company registered in [Country] with registered address at [Address] (hereinafter referred to as the "Importer").1. Product Description: The Exporter agrees to sell and the Importer agrees to purchase the following products:- Product Name: [Product Name]- Description: [Description]- Quantity: [Quantity]- Price: [Price]- Delivery Date: [Delivery Date]- Payment Terms: [Payment Terms]2. Delivery Terms: The Exporter shall deliver the products to the Importer at the designated location [Address] on the agreed delivery date. The Importer shall be responsible for any additional costs associated with the delivery of the products.3. Payment Terms: The Importer shall make payment to the Exporter in the following manner:- Payment Method: [Payment Method]- Payment Currency: [Currency]- Payment Schedule: [Schedule]- Payment Amount: [Amount]4. Inspection and Acceptance: The Importer shall have the right to inspect the products upon delivery and shall notify the Exporter of any defects or discrepancies within [Number] days of delivery. The Exporter shall remedy any defects or discrepancies within a reasonable time frame.5. Non-Disclosure: Both parties agree to keep confidential any information disclosed as a result of this agreement, including but not limited to pricing, product specifications, and business operations.6. Governing Law: This agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising from this agreement shall be settled through arbitration in [City, Country].7. Termination: Either party may terminate this agreement with written notice to the other party in the event of a breach of contract, failure to make payment, or insolvency.This Export Sales Contract constitutes the entire agreement between the Exporter and Importer. Any modifications to this agreement must be made in writing and signed by both parties.In witness whereof, the parties hereto have executed this Export Sales Contract as of the date first above written.Exporter Company:__________________________[Signature]Importer Company:__________________________[Signature]篇2International Sales ContractThis International Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address] (hereinafter referred to as the "Seller"), and [Buyer], a company organized and existing under laws of [Country], with its principal place of business located at [Address] (hereinafter referred to as the "Buyer").1. Subject of the Contract:The Seller agrees to sell and deliver the goods specified in Exhibit A attached hereto to the Buyer, and the Buyer agrees to purchase and accept the goods, under the terms and conditions set forth herein.2. Quantity and Description of Goods:The goods to be sold shall be as described in Exhibit A, including quantity, quality, and specifications.3. Price and Payment:The price of the goods shall be [Price] per unit, as specified in Exhibit A. Payment shall be made by [Payment Terms], as specified in Exhibit B. Payment shall be made in [Currency]. Anytaxes or other charges applicable to the sale of the goods shall be the responsibility of the Buyer.4. Delivery:The Seller shall deliver the goods to the Buyer at the location specified in Exhibit A. The delivery date shall be as specified in Exhibit A. The Seller shall be responsible for the cost of packaging, handling, and transportation of the goods to the Buyer.5. Inspection and Acceptance:The Buyer shall have the right to inspect the goods upon delivery. If the goods do not conform to the specifications set forth in Exhibit A, the Buyer shall notify the Seller in writing within [Number] days of delivery. The Seller shall replace any non-conforming goods at its own expense.6. Force Majeure:Neither party shall be liable for any delay or failure to perform its obligations under this Contract if such delay or failure is due to a force majeure event, including but not limited to acts of nature, war, terrorism, or government actions.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the International Chamber of Commerce.IN WITNESS WHEREOF, the Parties hereto have caused this Contract to be executed by their duly authorized representatives as of the date first above written.[Signature of Seller] [Signature of Buyer][Name and Title of Seller] [Name and Title of Buyer]篇3International Sales ContractThis International Sales Contract (the "Contract") is entered into on this [Date] by and between [Seller Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (the "Buyer").1. Subject of the Contract1.1 The Seller agrees to sell, transfer, and deliver to the Buyer the products as described in Exhibit A attached hereto (the "Products").1.2 The Buyer agrees to purchase and accept delivery of the Products specified in Exhibit A according to the terms and conditions set forth in this Contract.2. Price and Payment Terms2.1 The total purchase price for the Products shall be [Amount], payable by the Buyer to the Seller in the following manner: [Payment Terms].2.2 Payment shall be made in [Currency] and by [Payment Method] within [Number] days from the date of delivery.2.3 In case of late payment, the Buyer shall pay an interest rate of [Interest Rate]% per month until the outstanding amount is fully paid.3. Delivery3.1 The Seller shall deliver the Products to the Buyer's address as specified in Exhibit A within [Number] days from the date of this Contract.3.2 The Buyer shall be responsible for any costs related to customs duties, taxes, and transportation of the Products to their final destination.4. Inspection and Acceptance4.1 Upon delivery, the Buyer shall inspect the Products for any damage, defects, or non-conformity.4.2 The Buyer shall notify the Seller in writing of anynon-conformity within [Number] days from the date of delivery.4.3 If the Products are found to be non-conforming, the Seller shall replace the defective Products at no additional cost to the Buyer.5. Guarantee and Warranty5.1 The Seller guarantees that the Products shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery.5.2 If any defect is discovered during the warranty period, the Seller shall repair or replace the defective Products at no additional cost to the Buyer.6. Governing Law and Disputes6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].6.2 Any disputes arising out of or relating to this Contract shall be settled through amicable negotiations between the parties.6.3 If the parties fail to resolve the dispute amicably, it shall be settled by arbitration in [City], [Country] in accordance with the rules of [Arbitration Commission].IN WITNESS WHEREOF, the parties hereto have duly executed this Contract as of the date first above written.SELLER: [Seller Name]BUYER: [Buyer Name]Exhibit A: List of Products[Product Description, Quantity, Price]。
外贸销售合同中英文5篇
外贸销售合同中英文5篇第一篇：外贸销售合同中英文外贸销售合同中英文外贸合同Contract编号： No：日期： Date ：签约地点： Signed at：卖方：Sellers：地址：Address：邮政编码：Postal Code：电话：Tel：传真：Fax：买方：Buyers：地址：Address：邮政编码：Postal Code：电话：Tel：传真：Fax：买卖双方同意按下列条款由卖方出售，买方购进下列货物：The sellers agrees to sell a nd the buyer agrees to buy the undermentioned goods on the terms a nd conditions stated below.货号 Article No.品名及规格 Description&Specification数量Quantity单价 Unit Price总值：数量及总值均有_____%的增减,由卖方决定。
Total AmountWith _____% more o r less both in amount a nd quantity allowed at the sellers option.生产国和制造厂家 Country of Origin a nd Manufacturer包装： Packing：唛头： Shipping Marks：装运期限：Time of Shipment：装运口岸：Port of Loading：目的口岸：Port of Destination：保险：由卖方按发票全额110%投保至_____为止的_____险。
Insurance：To be effected by buyers for 110% of full invoice value covering _____ up to _____ only.付款条件：买方须于_____年_____月_____日将保兑的，不可撤销的，可转让可分割的即期信用证开到卖方。
外贸销售合同样本中英文6篇
外贸销售合同样本中英文6篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal office located at [Address] (the "Seller"), and [Buyer], a company organized and existing under the laws of [Country], with its principal office located at [Address] (the "Buyer").1. Subject of the ContractSeller agrees to sell and Buyer agrees to purchase the following products (the "Products"):Description of Products:- Quantity:- Price:- Delivery terms:- Payment terms:2. DeliveryThe Seller agrees to deliver the Products to the Buyer at the agreed-upon location on the date specified in the Contract. The Buyer agrees to accept delivery of the Products at the specified location and time.3. AcceptanceUpon delivery of the Products, the Buyer shall inspect the Products to ensure they conform to the specifications agreed upon in the Contract. If the Products do not meet theagreed-upon specifications, the Buyer may reject the Products and the Seller shall replace them with conforming Products at no additional cost to the Buyer.4. Payment TermsThe Buyer agrees to pay the Seller the total amount due for the Products in accordance with the payment terms specified in the Contract. Payment shall be made in [Currency] to the Seller's designated bank account.5. TerminationEither party may terminate this Contract in the event of a material breach by the other party. Notice of termination must be provided in writing and shall be effective upon receipt.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or relating to this Contract shall be resolved through arbitration in [City], [Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]By: ________________________[Buyer]By: ________________________篇2International Sales ContractThis International Sales Contract ("Contract") is made and entered into on [Date] by and between:Seller: [Seller Name]Address: [Address]Country: [Country]Telephone: [Telephone]Email: [Email]Buyer: [Buyer Name]Address: [Address]Country: [Country]Telephone: [Telephone]Email: [Email]Both the Buyer and Seller hereby agree to the following terms and conditions:1. Goods: Seller agrees to sell, and Buyer agrees to buy the following goods:Description: [Description of Goods]Quantity: [Quantity]Price: [Price]2. Payment: The total amount payable by the Buyer to the Seller shall be paid as follows:- [Payment Terms]3. Delivery: The goods shall be delivered to the Buyer at the following address:[Delivery Address]Delivery Date: [Delivery Date]4. Inspection: The Buyer shall have the right to inspect the goods upon delivery. Any defects or discrepancies in the goods must be reported to the Seller within [Number] days of delivery.5. Warranty: The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery.6. Force Majeure: Neither party shall be held liable for any failure to perform its obligations under this Contract if such failure is due to causes beyond its control, including but not limited to acts of God, war, riots, strikes, or natural disasters.7. Governing Law: This Contract shall be governed by the laws of [Country].8. Dispute Resolution: Any disputes arising from this Contract shall be resolved through arbitration in accordance with the rules of [Arbitration Organization].This Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings. This Contract may only be amended in writing and signed by both parties.In witness whereof, the parties hereto have executed this Contract as of the date first written above.Seller:Signature: _____________________Date: _____________________Buyer:Signature: _____________________Date: _____________________篇3Sales ContractThis Sales Contract (“Contract”) is entered into by and between Party A, a company incorporated in [Country] with a registered address at [Address] (“Seller”), and Party B, a company incorporated in [Country] with a registered address at [Address] (“Buyer”), collectively referred to as the “Parties”.1. Subject of the Contract1.1 The Seller agrees to sell and the Buyer agrees to purchase the products specified in Annex A attached hereto (the “Products”).1.2 The quantity, quality, specifications, and price of the Products shall be as set forth in Annex A.2. Payment Terms2.1 The Buyer shall make payment to the Seller in the currency specified in Annex A within [number] days of receipt of the Products.2.2 Any bank charges incurred in connection with the payment shall be borne by the Buyer.3. Delivery3.1 The Seller shall deliver the Products to the Buyer’s designated location as specified in Annex A.3.2 The delivery shall be made within [number] days after receipt of the payment.4. Quality Assurance4.1 The Seller warrants that the Products shall conform to the quality and specifications as set forth in Annex A.4.2 The Buyer shall have the right to inspect the Products upon delivery and shall notify the Seller of any defects ornon-conformities within [number] days of delivery.5. Force Majeure5.1 Neither Party shall be liable for any delay or failure to perform its obligations under this Contract due to force majeure events.5.2 If a force majeure event occurs, the affected Party shall promptly notify the other Party in writing and make all reasonable efforts to mitigate the impact of the event.6. Governing Law and Dispute Resolution6.1 This Contract shall be governed by the laws of [Country].6.2 Any dispute arising out of or in connection with this Contract shall be resolved through amicable negotiation between the Parties.7. Entire Agreement7.1 This Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the Products and supersedes all prior agreements, understandings, and representations, whether oral or written.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________ Date: ________________Buyer: _______________________ Date: ________________篇4International Sales AgreementThis International Sales Agreement ("Agreement") is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].1. Product Description:Seller agrees to sell and Buyer agrees to purchase the following goods (the "Products"): [Description of Products], in the quantities and at the prices set forth in Exhibit A attached hereto.2. Delivery:The Products shall be delivered to [Buyer's Address] within [Number] days after the receipt of the purchase order. Seller shall use its best efforts to ensure that the Products are delivered within the specified timeframe.3. Payment:Buyer shall pay Seller for the Products as set forth in Exhibit A. Payment shall be made in [Currency] within [Number] days from the date of delivery.4. Warranty:Seller warrants that the Products shall conform to the specifications set forth in Exhibit B and shall be free from defects in material and workmanship. In the event that the Products do not conform to the specifications, Buyer may return the Products within [Number] days of delivery for a full refund.5. Governing Law:This Agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Agreement shall be resolved through arbitration in [City], [Country].6. Entire Agreement:This Agreement contains the entire understanding of the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.In witness whereof, the parties hereto have executed this Agreement as of the date first above written.Seller:[Signature]Buyer:[Signature]Exhibit A - PricingExhibit B - Specifications篇5International Sales ContractSeller: XXX CompanyAddress: XXX Street, XXX City, CountryContact: Mr. XXXEmail:***********Telephone: +xxx-xxx-xxxBuyer: XXX CompanyAddress: XXX Avenue, XXX City, CountryContact: Ms. XXXEmail:***********Telephone: +xxx-xxx-xxxDate: XXXThis agreement is made between XXX Company, the seller, and XXX Company, the buyer, on the date mentioned above.1. CommodityThe seller agrees to sell and the buyer agrees to purchase the following commodity:- Description: XXX- Quantity: XXX- Price: $XXX per unit- Total Amount: $XXX2. Payment TermsThe buyer shall pay the total amount in full to the seller within XXX days upon the signing of this contract. Payment shall be made in the currency of XXX to the seller's designated bank account.3. Delivery TermsThe seller shall deliver the goods to the buyer's designated location within XXX days upon receiving the payment. The buyer shall bear all costs associated with the transportation and insurance of the goods.4. Quality AssuranceThe seller guarantees that the goods delivered shall meet the quality and specifications as stated in this contract. In case of any defects or damages, the buyer shall have the right to return the goods and receive a full refund.5. Force MajeureNeither party shall be liable for any failure or delay in performing its obligations under this contract due to circumstances beyond its control, such as acts of God, natural disasters, or government actions.6. Governing LawThis contract shall be governed by and construed in accordance with the laws of XXX. Any disputes arising from this contract shall be settled through amicable negotiations between the parties.Signed and agreed by:Seller: XXX CompanyBuyer: XXX CompanyWitness: ____________________Date: XXXThis sales contract represents the entire agreement between the seller and the buyer and supersedes all prior discussions and negotiations. This contract shall come into effect upon signing by both parties.篇6Foreign Trade Sales ContractParty A: [Seller's Name]Party B: [Buyer's Name]This contract is entered into by Party A and Party B on this [date] day of [month], [year], in accordance with the laws of [country].Article 1: CommodityParty A agrees to sell and Party B agrees to buy the following commodity: [description of the commodity, including quantity, quality, specifications, and price].Article 2: PriceThe total price of the commodity is [amount] and will be paid by Party B to Party A in the following manner: [payment terms, including the currency and method of payment].Article 3: DeliveryThe commodity will be delivered by Party A to Party B at the following address: [delivery address]. The delivery will be made on or before [specified date].Article 4: InspectionParty B has the right to inspect the commodity upon delivery and reject any goods that do not meet the specified quality requirements. Party A will be responsible for replacing any rejected goods.Article 5: WarrantyParty A warrants that the commodity is free from defects and conforms to the specifications listed in this contract. Party A will be liable for any damages caused by defective goods.Article 6: Force MajeureIf either party is unable to perform its obligations under this contract due to force majeure events such as natural disasters or political unrest, the affected party will be excused from its obligations for the duration of the force majeure event.Article 7: Dispute ResolutionAny disputes arising from this contract will be resolved through negotiation between the parties. If a resolution cannot be reached, the parties agree to submit the dispute to arbitration in accordance with the laws of [country].This contract is made in duplicate, with each party retaining one original copy.Party A: [Signature]Date: [Date]Party B: [Signature]Date: [Date]。
2024年外贸销售合同中英文精选8篇
2024年外贸销售合同中英文精选8篇篇1外贸销售合同本合同（以下简称“合同”）由以下双方签订：卖方：____________________（以下简称“甲方”）买方：____________________（以下简称“乙方”）鉴于甲方同意向乙方销售，乙方同意购买本合同项下的商品，双方经友好协商一致，达成如下协议：一、商品描述1. 商品名称：____________________2. 型号/规格：____________________3. 数量：____________________4. 质量标准：严格按照国家标准或双方约定的标准生产。
5. 包装：甲方应按照乙方的要求妥善包装，确保商品在运输过程中不受损坏。
二、价格与支付1. 商品价格：____________________（以具体商品为准）2. 支付方式：通过银行转账/信用证支付。
3. 支付时间：在合同签订后XX天内支付货款的XX%，余款在货物验收合格后支付。
4. 逾期付款责任：如乙方未按时支付货款，甲方有权解除本合同并要求乙方承担违约责任。
三、交货与验收1. 交货期限：自本合同签订之日起XX天内完成交货。
2. 交货地点：____________________。
3. 运输方式：____________________。
4. 验收标准：按照国家标准或双方约定的标准进行验收。
5. 验收时间：货到后XX天内完成验收。
6. 如因甲方原因导致延迟交货或商品质量不符合约定，甲方应承担违约责任。
1. 双方应对本合同的内容和实施过程保密，不得向任何第三方透露。
2. 双方应妥善保管与本合同相关的商业秘密和机密信息。
五、违约责任1. 如一方违反本合同的任何条款，另一方有权要求违约方承担违约责任。
2. 违约方应按照受损方的实际损失进行赔偿。
3. 若因违约导致本合同无法履行，守约方有权解除本合同并要求违约方承担相应责任。
六、法律适用与争议解决1. 本合同的签订、履行、解释及争议解决均适用中华人民共和国法律。
国际贸易合同外贸销售中英文合同8篇
国际贸易合同外贸销售中英文合同8篇篇1国际贸易合同（International Trade Contract）甲方（买方）：___________________地址：___________________________电话：___________________________传真：___________________________邮箱：___________________________法定代表人或授权代表：___________签署日期：___________乙方（卖方）：___________________地址：___________________________电话：___________________________传真：___________________________邮箱：___________________________法定代表人或授权代表：___________签署日期：___________鉴于甲、乙双方同意按照本合同所列条款进行国际贸易，现达成如下协议：一、产品描述与规格（Product Description and Specification）产品名称（Name of Product）：___________ 英文名称（English Name）：___________型号规格（Model and Specifications）：______________________________________数量（Quantity）：______________________________________单价（Unit Price）：______________________________________ （货币种类及金额）总价（Total Price）：______________________________________ （货币种类及金额）交货期限（Delivery Time）：______________________________________质量要求与技术标准（Quality Requirement and Technical Standard）：______________________________________包装要求（Packing Requirement）：______________________________________其它特别要求（Other Special Requirements）：______________________________________二、交货方式（Delivery Terms）乙方应按照合同规定的方式和期限将产品交付给甲方。
外贸销售中英文合同5篇
外贸销售中英文合同5篇篇1Foreign Trade Sales ContractThis Foreign Trade Sales Contract (the “Contract”) is made and entered into on [insert date] by and between:Seller: [insert name and address of seller]Buyer: [insert name and address of buyer]Whereas, the Seller is engaged in the business of [insert description of the Seller’s business], and the Buyer desires to purchase certain products from the Seller;Now, therefore, in consideration of the mutual covenants and agreements contained herein, the parties hereto agree as follows:1. Definitions1.1 “Products” shall mean the products to be sold by the Seller to the Buyer under this Contract, as described in Exhibit A attached hereto.2. Purchase and Sale of Products2.1 The Seller agrees to sell and the Buyer agrees to purchase the Products in accordance with the terms and conditions of this Contract.2.2 The Buyer shall purchase the Products from the Seller at the prices and in the quantities set forth in Exhibit A.3. Delivery3.1 The Seller shall deliver the Products to the Buyer at the location specified in Exhibit A.3.2 The delivery of the Products shall be made in accordance with the Incoterms specified in Exhibit A.4. Payment4.1 The Buyer shall pay the Seller for the Products in accordance with the payment terms specified in Exhibit A.4.2 All payments shall be made in [insert currency].5. Quality5.1 The Seller warrants that the Products shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship.5.2 The Buyer shall have the right to inspect the Products upon delivery and shall notify the Seller of any defects within [insert number] days of delivery.6. Force Majeure6.1 Neither party shall be liable for any delay or failure to perform its obligations under this Contract due to events beyond its reasonable control, including but not limited to acts of God, war, terrorism, labor disputes, and governmental actions.7. Governing Law7.1 This Contract shall be governed by and construed in accordance with the laws of [insert governing law].8. Entire Agreement8.1 This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Products and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________篇2Foreign Trade Sales English ContractContract Number: FTSC2022This Contract is made on this ____ day of ________, 2022, by and between:Seller: XYZ CompanyAddress: ABC Street, City, CountryContact Person: John SmithEmail:************************Phone: +123456789Buyer: ABC EnterprisesAddress: DEF Street, City, CountryContact Person: Mary JohnsonEmail:******************************Phone: +987654321Whereas, the Seller and Buyer agree to enter into a contract under the following terms and conditions:1. Product Description:The Seller agrees to sell and deliver the following products to the Buyer: [Insert product details including quantity, quality specifications, packaging requirements, etc.]2. Price and Payment:The total price for the products shall be [Insert total amount in USD] which shall be paid by the Buyer to the Seller in the following manner:- 50% of the total amount shall be paid as an advance payment upon signing of this contract.- The remaining 50% of the total amount shall be paid upon confirmation of delivery by the Buyer.3. Delivery Terms:The Seller shall deliver the products to the Buyer's designated address at the Buyer's expense. The delivery date shall be agreed upon by both parties in writing. Any delay in delivery due to unforeseen circumstances shall be communicated to the Buyer in advance.4. Quality Assurance:The Seller shall ensure that the products delivered conform to the quality specifications agreed upon by both parties. In case of any defects or discrepancies, the Seller shall replace or refund the affected products at no additional cost to the Buyer.5. Inspection and Acceptance:The Buyer shall have the right to inspect the products upon delivery and shall have [Insert number of days] days to inform the Seller of any defects or non-conformities. Failure to notify the Seller within the specified timeframe shall constitute acceptance of the products.6. Force Majeure:Neither party shall be liable for any delay or failure to perform its obligations under this Contract due to force majeure events such as natural disasters, government actions, or labor strikes. In such cases, both parties shall work together to find a mutually acceptable solution.7. Governing Law:This Contract shall be governed by and interpreted in accordance with the laws of [Insert governing law and jurisdiction].In witness whereof, the parties hereto have executed this Contract on the date first above written.Seller: XYZ CompanySignature: ______________________Print Name: John SmithBuyer: ABC EnterprisesSignature: ______________________Print Name: Mary JohnsonThis Contract is hereby agreed and accepted by both parties.Date: ___________篇3International Sales ContractThis International Sales Contract ("Contract") is made and entered into as of [date], by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address], and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address].1. Subject Matter of Contract: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept from Seller, the following goods: [description of goods], in the quantities and at the prices set forth in Exhibit A, attached hereto and incorporated herein by reference.2. Purchase Price: The purchase price for the goods shall be as set forth in Exhibit A.3. Payment Terms: Payment for the goods shall be made by Buyer in accordance with the payment terms set forth in Exhibit A.4. Delivery Terms: Seller agrees to deliver the goods to Buyer at the delivery location specified in Exhibit A. The parties agree that the goods shall be delivered in accordance with the delivery terms set forth in Exhibit A.5. Inspection and Acceptance: Buyer shall have the right to inspect the goods upon delivery. Buyer shall notify Seller of any defects or nonconformities in the goods within [number] days after delivery. Failure to timely notify Seller of any defects or nonconformities shall constitute acceptance of the goods by Buyer.6. Title and Risk of Loss: Title to the goods shall pass to Buyer upon delivery. Risk of loss shall pass to Buyer upon delivery.7. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications set forth in Exhibit A. Seller further warrants that it has good and marketable title to the goods.8. Limitation of Liability: Seller's liability under this Contract shall be limited to the purchase price of the goods. Seller shall not be liable for any special, incidental, or consequential damages.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [country].10. Entire Agreement: This Contract constitutes the entire agreement between Seller and Buyer with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: __________________________Buyer: __________________________Exhibit ADescription of Goods:Quantity:Price:Delivery Location:Delivery Terms:Payment Terms:篇4International Trade Sales ContractSeller: ABC CompanyAddress: 123 Main Street, City, CountryContact: Mr. John DoeEmail:**********************Tel: +123456789Buyer: XYZ CorporationAddress: 456 Park Avenue, City, Country Contact: Ms. Jane SmithEmail:****************************Tel: +987654321This contract is made and entered into on this __ day of __, 20__, between ABC Company, hereinafter referred to as the Seller, and XYZ Corporation, hereinafter referred to as the Buyer.1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Product name: _______- Quantity: _______- Price: _______- Delivery date: _______- Payment terms: _______- Packaging: _______2. Shipping and DeliveryThe Seller shall be responsible for arranging and paying for the shipment of the products to the Buyer's designated location. The products shall be delivered by the agreed-upon deliverydate in good condition and in accordance with the specifications outlined in this contract.3. Payment TermsThe Buyer agrees to make payment to the Seller according to the following terms:- 30% of the total amount as a down payment upon signing this contract- 70% of the total amount upon the delivery of the products4. Quality AssuranceThe Seller assures that the products supplied under this contract shall comply with the quality and safety standards agreed upon by both parties. In the event of any defects or non-conformities, the Seller shall replace the products at no additional cost to the Buyer.5. ConfidentialityBoth parties agree to keep all commercial and technical information exchanged during the course of this contract confidential and not disclose it to any third party without the other party's consent.6. Governing LawThis contract shall be governed by and construed in accordance with the laws of the Seller's country. Any dispute arising from or in connection with this contract shall be resolved through amicable negotiations between both parties. If a resolution cannot be reached, the dispute shall be referred to arbitration in accordance with the rules of the International Chamber of Commerce.In witness whereof, the parties hereto have executed this contract as of the date first above written.Seller: ABC CompanyBy: _______________________________Buyer: XYZ CorporationBy: _______________________________This international trade sales contract is hereby accepted and agreed upon by both parties.Date: _______________________________Signature: _________________________Name:______________________________篇5International Trade Sales ContractThis International Trade Sales Contract (the "Contract") is made and entered into as of [Contract Date] by and between:Seller: [Name of Seller]Address: [Seller’s Address]Contact Person: [Seller’s Contact Person]Buyer: [Name of Buyer]Address: [Buyer’s Address]Contact Person: [Buyer’s Contact Person]The Parties hereby agree to the following terms and conditions:1. Product Details1.1 The Seller agrees to sell and deliver the following products to the Buyer:- Product Name: [Product Name]- Quantity: [Quantity]- Price: [Price]1.2 The Seller guarantees that the products conform to the specifications and quality standards as agreed upon by the Parties.2. Delivery2.1 The Seller shall deliver the products to the Buyer in accordance with the specified delivery date and location.2.2 The Buyer shall be responsible for all shipping and transportation costs associated with the delivery of the products.3. Payment3.1 The total purchase price for the products shall be [Total Amount] payable by the Buyer to the Seller in the following manner:- [Deposit Amount] as a deposit upon signing the Contract.- The balance amount of [Balance Amount] shall be paid by the Buyer upon receipt of the products.3.2 The Seller shall provide the Buyer with an invoice for the purchase of the products.4. Inspection and Acceptance4.1 The Buyer shall have the right to inspect the products upon delivery and shall notify the Seller within [Number of Days] days of any defects or non-conformities.4.2 If the products do not conform to the specifications as agreed upon by the Parties, the Seller shall replace the products at no additional cost to the Buyer.5. Force Majeure5.1 Neither Party shall be liable for any failure or delay in performance under this Contract due to circumstances beyond its reasonable control, including but not limited to acts of God, acts of governmental authorities, wars, fires, floods, and strikes.6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Governing Law Jurisdiction].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller:Signature: ___________________Print Name: _________________Date: _________________Buyer:Signature: ___________________Print Name: _________________Date: _________________This Contract constitutes the entire agreement between the Parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Contract.[Additional clauses can be included as deemed necessary by the Parties]The above Contract is hereby accepted and agreed to by the Parties.Seller:Signature: ___________________Print Name: _________________Date: _________________Buyer:Signature: ___________________ Print Name: _________________ Date: _________________。
外贸销售中英文合同8篇
外贸销售中英文合同8篇篇1合同编号：XXX/XXXX/XXXX/XX甲方：（出口商全称）地址：（出口商地址）电话：（出口商联系电话）传真：（出口商传真号码）邮编：（出口商邮政编码）法定代表人：（出口商法人姓名）公司名称：（出口商公司名称）注册国家或地区：（注册国家或地区）营业注册证号码：（营业执照注册号）业务类型：对外贸易货物销售等进出口相关业务（以下简为甲方）以下简称买方篇2合同编号：【编号】甲方（卖方）：【公司名称】地址：【公司地址】电话：【公司电话】传真：【公司传真】电子邮箱：【公司邮箱】乙方（买方）：【客户名称】地址：【客户地址】电话：【客户电话】传真：【客户传真】电子邮箱：【客户邮箱】鉴于甲方同意向乙方销售以下商品：【商品名称和数量】现甲、乙双方根据《中华人民共和国合同法》等相关法律法规，就有关事宜达成如下协议：一、商品描述1. 商品名称：【商品名称】2. 商品规格：【商品规格】3. 商品数量：【商品数量】4. 商品质量：按照附件中的质量标准和规格要求进行生产和检验，符合国际标准。
5. 商品包装：按照甲方的标准包装，确保商品在运输过程中完好无损。
二、价格条款1. 商品价格：【商品价格】2. 货币种类：本合同所涉及的金额均以【货币种类】计价。
3. 运输费用：运输费用由乙方承担，甲方负责安排运输。
如因运输导致商品损失，由承运方负责赔偿。
4. 支付方式：【支付方式】，支付时间为【支付时间】。
乙方需在支付期限内完成付款，否则视为违约。
5. 退换货条款：如因甲方原因导致商品质量问题，乙方有权要求退换货。
退换货产生的费用由甲方承担。
如因乙方原因导致退换货，退换货产生的费用由乙方承担。
退换货的具体流程和条件详见附件。
三、交货期限和地点1. 交货期限：【交货时间】。
甲方需在约定时间内完成交货。
如因特殊情况无法按时交货，甲方需及时通知乙方并协商解决方案。
2. 交货地点：【交货地点】。
货物到达指定地点后，由乙方自行安排验收。
外贸销售中英文合同5篇
外贸销售中英文合同5篇篇1甲方（买方）：_____________地址：____________________电话：____________________传真：____________________电子邮箱：________________公司注册号/统一社会信用代码：_______税务登记证号：___________乙方（卖方）：_____________地址：____________________电话：____________________传真：____________________电子邮箱：________________公司注册号/统一社会信用代码：_______税务登记证号：___________鉴于甲、乙双方本着互惠互利的原则，经友好协商，就甲方向乙方购买产品（以下简称“货物”）事宜达成如下协议：一、货物名称、规格、数量及价格（在此添加货物名称、型号、规格、数量及价格的详细列表，可以中英文对照）二、交货期限和方式乙方应在合同签署后的___天内将货物送达至甲方指定的地点，同时提供必要的出货文件。
因乙方原因导致延迟交货的，乙方应承担违约责任。
若因不可抗拒因素导致延迟交货，乙方应及时通知甲方并协商解决方案。
三、质量标准与验收方式乙方应保证所销售的货物符合合同规定的质量标准。
甲方在收到货物后有权对货物进行检验，如发现质量问题，应在收到货物后的___天内书面通知乙方，乙方应在接到通知后___天内予以解决。
如因乙方原因导致货物质量不符合合同规定，乙方应承担违约责任。
验收标准和方法按国际通行标准执行或由双方协商确定。
四、付款方式及期限甲方应按照合同规定的方式支付货款。
具体的付款方式和期限如下：（添加详细的付款条款，如预付款比例、支付方式、支付时间等）。
如甲方未能按时支付货款，乙方有权按照合同规定收取滞纳金或采取其他合法手段进行催收。
但乙方不得以此为由延迟交货。
如因不可抗拒因素导致甲方延迟付款，双方应协商解决。
外贸合同英文版7篇
外贸合同英文版7篇篇1This contract is hereby made by and between [买方名称], hereinafter referred to as the Buyer, and [卖方名称], hereinafter referred to as the Seller, concerning the import of [商品名称] from the Seller to the Buyer.1. Contract Article and Quantity本合同涉及的商品名称为[商品名称]，数量详见附件清单。
2. Price and Payment Terms商品价格及支付条款如下：- The total contract price shall be USD [金额] （总合同金额）。
- Payment terms: 30% T/T in advance as a down payment; 70% balance to be paid against the copy of the shipping documents.- All prices are FOB [港口名称], including necessary loading charges but excluding any other cost or charges beyond the port.3. Delivery and Quality Assurance交货及质量保证条款如下：- The Seller shall ensure proper packaging of the goods and shall mark the cases with the gross weight, net weight, manufacturer's name and necessary shipping marks.- The Seller shall guarantee that the goods are new and of the quality, specifications and quantity specified in the contract. Any discrepancies in quality must be reported to the Buyer immediately upon discovery.- The Seller shall arrange shipment within [交货期限] from the date of receiving the L/C or payment. The Seller shall inform the Buyer 4 weeks prior to the expected date of shipment of the estimated date of shipment and vessel name.4. Terms of Shipment and Delivery运输和交付条款如下：- The Seller shall arrange for shipment of the goods by sea under a confirmed, binding and valid shipping document. The Seller shall ensure that proper packing is made for ocean transportation and ensure that the goods are delivered to the vessel within the agreed time at the loading port nominated by the Seller. The risk of damage or loss in transit is borne by theSeller until delivery of the goods is made to the vessel at the port nominated by the Seller.- The Seller shall provide shipping documents required for customs clearance at destination port in a timely manner after shipment has been completed in full compliance with all contractual requirements pertaining to time, quantity, specifications and other matters covered by this Contract.Failure to comply with these requirements shall constitute a breach of Contract by the Seller.The Seller shall be responsible for any delay in delivery attributable to late delivery of documents by the Seller, provided however that timely notice of such delay has been given by Fax/E-mail/Letter and if requested by the Buyer, such delay is caused by reasonable factors beyond the Seller's control.The Seller shall be responsible for any damage or loss attributable to late delivery of documents as well as any delay in delivery caused by such late delivery of documents beyond the time limit agreed in this Contract or required by the applicable law.If late delivery results in loss to the Buyer, any claim should be settled mutually through friendly negotiations based on facts.In case such negotiations fail, claims could be filed in court with due evidence against compensation for direct losses only due to late delivery as confirmed by compensation regulations under international commercial law at the court’s decision, after consultation with relevant authorities about laws of China's Maritime Law as regards handling such claims.The claim should be filed within a reasonable period from date of discovery of loss or damage attributable to late delivery but not later than three months from date of arrival of goods at destination port stipulated in this Contract.篇2甲方（买方）：___________地址：___________电话：___________电子邮箱：___________法定代表人（或授权代表）：___________乙方（卖方）：___________地址：___________电话：___________电子邮箱：___________法定代表人（或授权代表）：___________鉴于甲、乙双方同意按照以下条款进行国际贸易交易，特订立本合同协议：一、商品名称、规格及数量甲方同意购买，乙方同意出售以下商品：（请在此处详细列出商品的名称、规格、型号、数量等详细信息）二、价格及支付方式1. 甲方应按照以下条款支付商品价款：___________ （请在此处明确价格条款，包括货币种类、单价、总价等）2. 支付方式：___________ （请在此处明确支付方式，如电汇、信用证等）3. 付款期限：___________ （请在此处明确付款期限）三、交货与装运1. 交货期限：乙方应在合同生效后_______天内交货。
外贸合同范本中英文6篇
外贸合同范本中英文6篇篇1合同编号：【合同编号】甲方（买方）：【买方名称】乙方（卖方）：【卖方名称】鉴于甲、乙双方同意按照本合同的条款进行货物交易，现特此签订本合同。
一、货物描述及规格（中文）货物名称：【货物名称】（中文）型号/规格：【型号/规格】（英文）Goods Description：【Goods Name】（英文）Model/Specification：【Model/Specs】二、数量及单位（中文）数量：【数量】（中文）计量单位：【计量单位】（英文）Quantity：【Quantity】（英文）Unit of Measurement：【Unit】三、价格与支付方式（中文）货物单价：【货物单价】（中文）总金额：【总金额】（英文）Unit Price：【Unit Price】（英文）Total Amount：【Total Amount】支付方式：【支付方式描述，例如：通过不可撤销的信用证，货到付款等】四、交货与包装（中文）交货期限：【交货日期】（中文）交货地点：【交货地点】（英文）Delivery Time：【Delivery Date】（英文）Delivery Place：【Delivery Place】包装要求：【包装描述，例如：按照惯例进行适当包装，保证货物安全等】五、品质保证与检验乙方应保证货物符合合同规定的品质与数量。
甲方有权在货到后进行检验，如发现品质或数量与合同不符，甲方有权要求乙方更换或退货。
六、保密条款双方应对本合同内容及在执行过程中获知的对方商业秘密和技术秘密予以保密，未经对方许可，不得向任何第三方泄露。
七、违约责任如一方违反本合同的任何条款，违约方应承担由此造成的一切损失。
八、不可抗力如因不可抗力因素致使一方不能履行本合同，应及时通知对方，双方可通过友好协商，确定是否修改或解除合同。
九、法律适用与争议解决篇2合同编号：【编号】甲方（买方）：【买方名称和地址】乙方（卖方）：【卖方名称和地址】根据《中华人民共和国合同法》及相关法律法规的规定，甲乙双方在平等、自愿、公平和诚实信用的基础上，就买方向卖方购买商品事宜，经友好协商，达成如下协议：一、商品名称、规格、数量及价格（中英文对照）Commodity Name, Specifications, Quantity and Price （中英文对照）商品名称商品规格数量价格备注（请根据实际情况填写）二、交货期限与方式（中英文对照）Delivery Time and Mode （中英文对照）乙方应按照甲方要求的交货期限将商品交付给甲方。
外贸常见合同(中英版)5篇
外贸常见合同(中英版)5篇篇1Contract for Foreign Trade Common Practice甲方（甲方公司名）：______________乙方（乙方公司名）：______________签订日期：______________________一、合同概述与目的本合同旨在对甲、乙双方在对外贸易中的合作关系进行明确规范，保护双方的合法权益，实现共赢。
甲乙双方根据平等互利原则，经过友好协商，就甲方购买乙方产品事宜达成如下协议。
本合同是双方共同遵守的法律约束文件。
二、合同双方信息甲方信息（公司全称）：________________________ 联系方式：_______________________乙方信息（公司全称）：________________________ 联系方式：_______________________三、交易商品与规格商品名称：________________________规格型号：________________________数量及单位：______________________单价及总价：______________________交货期限：______________________包装方式及标准：______________________付款方式及期限：______________________付款方式说明：本合同的付款方式为________（如电汇、信用证等）。
乙方收到货款后按合同规定时间发货。
双方可约定预付款比例，余款在交货前或交货后支付等条款。
质量保证及售后条款：乙方应保证商品质量符合相关标准，并承担质保期内出现的任何质量问题导致的后果。
甲方享有合法的售后服务权利等条款。
双方应明确商品质量标准和验收方法。
四、交货与运输方式交货地点及方式：______________________运输方式及费用承担：______________________交货期限及延迟交货责任：双方应明确交货期限，如因乙方原因导致延迟交货，应按照约定承担相应责任等条款。
2024年外贸销售合同英文版7篇
2024年外贸销售合同英文版7篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer:Seller:Name: _____________________________Address: _____________________________Country: _____________________________Buyer:Name: _____________________________Address: _____________________________Country: _____________________________Article 1: Scope of SupplyThe Seller agrees to sell the following products to the Buyer: (Insert details of the products, including name, specifications, quantity, and price).Article 2: Terms of DeliveryArticle 3: Price and PaymentThe total contract value is USD _______ (Total Amount). The payment terms are as follows:a) Deposit: USD _______ (Deposit Amount) to be paid within _______ (Days/Weeks) after the Contract is signed.b) Balance payment: The balance amount shall be paid against the presentation of shipping documents in accordance with the terms of L/C.Article 4: Quality and InspectionArticle 5: Force MajeureArticle 6: Warranty and ClaimsArticle 7: DisputesArticle 8: General ProvisionsIn witness whereof, the parties have signed this Contract on behalf of themselves on the date mentioned below.Signed on behalf of Seller: _________________________ Date: _________ Place: _________ Witness Signature: _________ Date:_________ Place: _________篇2SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer:Seller:Name: _________________________Address: _________________________Country: _________________________Buyer:Name: _________________________Address: _________________________Country: _________________________Article 1: Product DescriptionThe Seller shall sell to the Buyer the following products (hereinafter referred to as "Products"): [Specific products and their specifications, quantities, etc.]Article 2: Price and Payment1. The total price of the Products shall be [specific amount] USD.2. Payment terms: [Letter of Credit (L/C), Telegraphic Transfer (T/T), or other agreed payment methods].3. Details of payment: [Date of payment, amount due at each stage, etc.]Article 3: Delivery and Quality Assurance1. Delivery date: [Specific delivery date or period].2. Quality standards: [Product quality specifications].3. The Seller shall ensure that the Products are in conformity with the agreed quality standards and shall bear any costs arising from failure to meet such standards.Article 4: Packaging and Shipping1. The Seller shall properly package the Products for international shipping.2. Shipping terms: [FOB (Free On Board), CIF (Cost, Insurance and Freight), or other agreed shipping terms].3. The Seller shall provide necessary shipping documents.Article 5: Risk and Ownership TransferRisk of loss or damage to the Products shall pass to the Buyer upon delivery to the carrier nominated by the Buyer. Ownership of the Products shall transfer at the point of delivery as per Article 3.Article 6: Confidentiality and Intellectual PropertyBoth parties shall maintain confidentiality of any confidential information shared during the performance of this Contract and shall not disclose such information to third parties without the other party's consent.Article 7: Warranty and After-Sales Service1. The Seller shall provide a warranty period for the Products. Details of warranty period and terms shall be agreed upon by both parties.2. The Seller shall provide necessary after-sales service in case of product defects or issues during the warranty period.Article 8: Force MajeureIn case of force majeure events, both parties shall negotiate and seek to resolve any issues arising from such events.Article 9: Dispute ResolutionAny dispute arising from or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specified court/arbitration institution] for resolution.Article 10: Miscellaneous1. This Contract is made in [number of copies] originals, each party holding [number of copies]. All copies shall have the same legal effect.2. This Contract shall be subject to the laws of [specified country].3. Any amendments or modifications to this Contract must be made in writing and agreed by both parties.4. This Contract is effective from the date of signing by both parties and shall remain valid for [specified duration].In witness whereof, the parties have signed this Contract in _________ (place) on _________ (date).篇3FOREIGN TRADE SALES CONTRACTContract No. [合同编号]Date: [签订日期]Buyer:Name: [买方名称]Address: [买方地址]Contact Person: [联系人姓名]Email: [买方邮箱]Tel: [买方电话]Seller:Name: [卖方名称]Address: [卖方地址]Contact Person: [联系人姓名]Email: [卖方邮箱]Tel: [卖方电话]This contract is made by and between the Buyer and the Seller: [买卖双方名称]，whereby they agree to buy and sell the following commodities according to the terms and conditions stipulated below:Article (商品条款)The Seller agrees to sell and the Buyer agrees to purchase the following products under the terms and conditions specified in this contract. The specifications and quantities are listed in the appendix.Terms of Delivery (交货条款)Payment Terms (支付条款)The Seller shall provide an invoice with proper value-added tax invoice to be paid by the Buyer against delivery of goods.The Seller shall provide a copy of original bill of lading to be confirmed by the Bank for final payment against full settlement of amount due on presentation of original documents to Bank of Payee for negotiation.All banking charges, remittance fees, and other related costs are borne by the Buyer unless otherwise agreed by both parties.Bank details are as follows: Bank Name, Bank Address, Bank Account No., SWIFT Code and Branch Name for further credit or transfer.All documents must be presented within XX days from the date of shipment/ date on Bill of Lading which ever is later for negotiation of payment. Any delay in presentation of documents will not be acceptable and the buyer will be responsible for all losses arising therefrom.Any document not issued by Sellers named on L/C must be confirmed by Sellers before shipment. All other terms and conditions stipulated in International Chamber of Commerce rules & regulation ICC 500 will be strictly observed and adhered to by both parties.In case of non-performance on either side，the parties agree that the court at _____ have exclusive jurisdiction in all disputes arising out or in connection with this Contract whose substantive matters are governed by laws of ____. （如双方不能履约，双方同意由______法院对由此合同产生的或与本合同有关的纠纷进行裁决，该合同实质内容应遵守______的法律。
外贸销售合同英文版6篇
外贸销售合同英文版6篇篇1Foreign Trade Sales ContractContract Number: [Insert Contract Number]Date of Contract: [Insert Date]Seller:Name of Company: [Insert Seller’s Company Name] Address: [Insert Seller’s Address]Country: [Insert Seller’s Country]Buyer:Name of Company: [Insert Buyer’s Company Name] Address: [Insert Buyer’s Address]Country: [Insert Buyer’s Country]In consideration of the mutual promises and conditions set forth below, the Seller and the Buyer agree to enter into this Foreign Trade Sales Contract:Article 1: Product DescriptionThe Seller shall sell and the Buyer shall purchase the following products: [Insert detailed list of products, including product name, specifications, quantity, and unit price].Article 2: DeliveryThe Seller shall deliver the products to the Buyer at the following location: [Insert delivery location]. The delivery date shall be no later than [Insert delivery date].Article 3: PaymentThe Buyer shall make payment in full via [Insert agreed payment method (e.g., T/T transfer, L/C, etc.)]. Payment terms shall be as follows: [Insert payment terms (e.g., 30% advance, balance against delivery, etc.)].Article 4: Quality and InspectionThe Seller shall ensure that the products are of the agreed quality. The Buyer shall have the right to conduct inspectionsupon receipt of the products. If any defects are found, the Seller shall be responsible for rectifying or replacing the products.Article 5: Force MajeureIf performance of this Contract is prevented, restricted or delayed due to any cause beyond the control of either party, such party shall notify the other promptly and provide sufficient evidence to prove such occurrence. The affected party shall strive to overcome the hindrance and continue performance as soon as possible.Article 6: WarrantyThe Seller guarantees that the products are free from any defects in material and workmanship and agrees to replace or repair any defective products, at its option, within a period of [Insert warranty period] from the date of delivery to the Buyer.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. This obligation shall survive the termination of this Contract.Article 8: Liability for Breach of ContractIf any party fails to perform its obligations under this Contract, the non-breaching party may claim compensation for any losses incurred. If such breach is fundamental, thenon-breaching party may terminate this Contract.Article 9: Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Insert applicable country/region]. Any disputes arising from or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [Insert applicable court/tribunal] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the Seller and the Buyer pertaining to the subject matter hereof and supersedes all prior agreements, understandings and communications, whether oral or written. No modification or amendment of this Contract shall be binding unless made in writing and signed by both parties.IN WITNESS WHEREOF, the Seller and the Buyer have signed this Contract in [Insert number] counterparts, each party retaining one counterpart.Seller: _____________________ Date: _________________(Signature of Seller) (Date of Signature)Buyer: _____________________ Date: _________________(Signature of Buyer) (Date of Signature)Note: This is a legal document and should be reviewed by legal counsel before execution. The above terms are subject to negotiation and may be modified as per the parties’ agreement.篇2This Sales Contract is made by and between the Buyer and the Seller:Buyer: _________________ (hereinafter referred to as "Party A") Seller: _________________ (hereinafter referred to as "Party B")WHEREAS the Buyer is interested in purchasing certain goods from the Seller, and the Seller is willing to sell the goods to the Buyer on the terms and conditions set out in this Contract.NOW, THEREFORE, the parties hereby agree as follows:Article 1: Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following goods:（产品描述和数量）Article 2: Price and Payment TermsThe price of the goods shall be （价格）. The payment terms are as follows: （支付条款）.Article 3: Delivery and ShippingThe Seller shall deliver the goods to the Buyer's designated port within （交货期限）. The shipping terms are as follows: （运输和装运条款）.Article 4: Quality and InspectionThe Seller shall ensure that the goods are in accordance with the contracted quality standards. The Buyer shall have the right to inspect the goods prior to shipment. （质量和检验条款）Article 5: Terms of WarrantyThe Seller shall provide a warranty for the goods, covering any defects in material or workmanship for a period of （保修条款）.Article 6: Force MajeureIf either party is prevented from performing this Contract due to force majeure, the affected party shall notify the other party immediately and take reasonable measures to mitigate the losses. （不可抗力条款）Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract, which is not intended for public disclosure. （保密条款）Article 8: Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to （争议解决方式）.Article 9: Applicable Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of （适用法律和司法管辖）.Article 10: Miscellaneous（其他条款）IN WITNESS WHEREOF, the parties have executed this Contract in duplicate, each party holding one original.Buyer: ________________(Signature)Date: ________Seller: ________________(Signature)Date: ________篇3Contract for Foreign Trade Sales甲方（买方）：____________乙方（卖方）：____________根据平等互利原则，经友好协商，甲乙双方就甲方向乙方购买产品事宜达成如下协议：This contract is made by and between Party A (Buyer) and Party B (Seller) on the basis of equality and mutual benefit, through friendly consultation, for the purpose of purchasing products from Party B by Party A.一、产品描述及规格（Product Description and Specifications）1. 产品名称：____________2. 型号/规格：____________3. 数量：____________4. 单价：____________5. 总价：____________6. 质量标准：按照国际标准和双方协商的质量要求执行。
外贸销售合同英文版3篇
外贸销售合同英文版3篇篇1International Sales ContractThis International Sales Contract (hereinafter referred to as the "Contract") is made and entered into on this [insert date] by and between:Seller: [Insert Name], a company incorporated and registered under the laws of [Insert Country], with its registered office at [Insert Address], hereinafter referred to as the "Seller";Buyer: [Insert Name], a company incorporated and registered under the laws of [Insert Country], with its registered office at [Insert Address], hereinafter referred to as the "Buyer".PreambleWhereas, the Seller is engaged in the business of manufacturing and selling [Insert Product], and the Buyer is interested in purchasing the same for resale in its own territory;Now, therefore, in consideration of the mutual covenants and agreements contained herein, the Parties hereto agree as follows:1. Subject Matter of the Contract1.1 The Seller agrees to sell and deliver to the Buyer and the Buyer agrees to purchase from the Seller the following goods: [Insert Description of Goods], in accordance with the specifications and quantities as set forth in Exhibit A hereto.2. Price2.1 The price for the goods shall be [Insert Price] per unit, as specified in Exhibit A. The total purchase price for the goods shall be [Insert Total Price], as set forth in Exhibit A.2.2 The price includes all costs of packaging, labeling, loading, and delivery of the goods to the Buyer's designated location, as set forth in Exhibit A.3. Delivery3.1 The Seller shall deliver the goods to the Buyer's designated location as specified in Exhibit A within [Insert Number] days from the date of signing this Contract.3.2 The Buyer shall be responsible for inspecting the goods upon delivery and shall notify the Seller of any defects or discrepancies within [Insert Number] days from the date of delivery.4. Payment Terms4.1 The Buyer shall pay the total purchase price as specified in Exhibit A within [Insert Number] days from the date of delivery. Payment shall be made by [Insert Payment Method].4.2 In the event of late payment, the Buyer shall be liable to pay interest at the rate of [Insert Interest Rate] per annum on the outstanding amount from the due date until the date of payment in full.5. Quality Assurance5.1 The Seller warrants that the goods delivered under this Contract shall conform to the specifications and quality standards as set forth in Exhibit A.5.2 In the event of any non-conformity or defect in the goods, the Seller shall, at its own expense, replace the defective goods or refund the purchase price to the Buyer, as mutually agreed upon by the Parties.6. Governing Law and Dispute Resolution6.1 This Contract shall be governed by and construed in accordance with the laws of [Insert Country].6.2 Any dispute arising out of or in connection with this Contract shall be resolved through amicable negotiations between the Parties. If the dispute cannot be resolved amicably, it shall be referred to arbitration in accordance with the rules of [Insert Arbitration Institution].In witness whereof, the Parties hereto have executed this Contract as of the date first above written.Seller: ___________________________ [Insert Name and Title]Buyer: ___________________________ [Insert Name and Title]篇2Sales ContractThis Sales Contract is entered into on [Date] between [Seller Name], a company registered in [Country], with its principal place of business located at [Address], hereinafter referred to as the "Seller", and [Buyer Name], a company registered in [Country], with its principal place of business located at [Address], hereinafter referred to as the "Buyer".1. Subject of Contract1.1 The Seller agrees to sell and the Buyer agrees to buy the following goods: [Description of Goods].2. Price2.1 The price of the goods shall be [Amount] per unit.2.2 The total price for the goods shall be [Amount].2.3 Payment shall be made in [Currency] and shall be paid in [Number] installments as follows:- [Amount] due upon signing of this Contract- [Amount] due upon delivery of the goods- [Amount] due [Number] days after delivery of the goods3. Delivery3.1 The Seller shall deliver the goods to the Buyer's premises located at [Address] on or before [Delivery Date].3.2 The Buyer shall be responsible for all costs associated with the delivery of the goods, including but not limited to shipping, insurance, and customs duties.4. Inspection and Acceptance4.1 The Buyer shall have [Number] days from the delivery date to inspect the goods and notify the Seller of any defects or non-conformities.4.2 The Buyer shall be deemed to have accepted the goods if no notice of defects is given within the specified timeframe.5. Warranty5.1 The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of [Number] months from the delivery date.5.2 The Seller's liability under this warranty shall be limited to the repair or replacement of the defective goods or a refund of the purchase price.6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].7. Dispute Resolution7.1 Any dispute arising out of or in connection with this Contract shall be settled through negotiation between the parties.7.2 If the dispute cannot be resolved through negotiation, it shall be submitted to arbitration in accordance with the rules of the [Arbitration Institution].8. Entire Agreement8.1 This Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: [Seller Name]Buyer: [Buyer Name]篇3Export Sales ContractThis Export Sales Contract is made and entered into on [date], by and between [exporter name], hereinafter referred to as the "Seller", and [importer name], hereinafter referred to as the "Buyer". Both parties agree to the following terms and conditions:1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products: [description of products], hereinafter referred to as the "Products".The Buyer agrees to purchase [quantity] of the Products as specified in the Annex attached to this contract.3. Price:The price of the Products shall be [price] per unit, with a total price of [total price], as specified in the Annex attached to this contract.4. Payment Terms:The Buyer shall pay the total price of the Products within [number] days of receiving the invoice. Payment shall be made in [currency] via [payment method].5. Delivery:The Seller shall deliver the Products to the Buyer's designated location on or before [delivery date]. The Buyer shall cover all shipping costs and insurance.6. Inspection:The Buyer shall have the right to inspect the Products upon delivery. Any defects or discrepancies shall be reported to the Seller within [number] days of delivery.The Seller warrants that the Products shall be free from defects in materials and workmanship for a period of [warranty period] from the date of delivery.8. Force Majeure:Neither party shall be liable for any delay or failure to perform under this contract due to circumstances beyond their control, including but not limited to acts of God, war, terrorism, government actions, or natural disasters.9. Governing Law:This contract shall be governed by the laws of [governing law], without regard to its conflict of laws principles.In witness whereof, the parties hereto have executed this contract as of the date first written above.Seller:Name: [seller name]Title: [seller title]Date:Buyer:Name: [buyer name] Title: [buyer title] Date:。
外贸购销合同模板英文
外贸购销合同模板英文这是小编精心编写的合同文档，其中清晰明确的阐述了合同的各项重要内容与条款，请基于您自己的需求，在此基础上再修改以得到最终合同版本，谢谢！外贸购销合同模板英文Contract for Import and Export of Goods本合同由以下双方签订：卖家（以下简称“卖方”）：地址：联系方式：买家（以下简称“买方”）：地址：联系方式：第一条 商品描述1.1 商品名称：1.2 商品规格：1.3 商品数量：1.4 商品单价：1.5 商品总价：第二条 付款条款2.1 付款方式：2.2 付款期限：2.3 付款地点：第三条 交货条款3.1 交货方式：3.2 交货期限：3.3 交货地点：第四条 质量保证4.1 卖方保证商品符合约定规格和质量标准。
4.2 如果商品存在质量问题，买方有权在收到商品后一定时间内要求退货或换货。
第五条 违约责任5.1 如果任何一方违反本合同的任何条款，违约方应承担相应的法律责任。
5.2 如果卖方未能按照约定时间、地点和方式交货，买方有权解除合同并要求赔偿。
5.3 如果买方未能按照约定时间付款，卖方有权解除合同并要求赔偿。
第六条 争议解决6.1 双方应通过友好协商解决合同执行过程中的任何争议。
6.2 如果协商无果，任何一方均有权向合同签订地人民法院提起诉讼。
第七条 其他条款7.1 本合同自双方签字（或盖章）之日起生效。
7.2 本合同一式两份，双方各执一份。
卖方（盖章）：买方（盖章）：签订日期：。
外贸销售合同样本中英文6篇
外贸销售合同样本中英文6篇篇1International Sales ContractThis International Sales Contract (“Contract”) is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address], and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address].1. Subject Matter of the ContractSeller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A. The goods shall conform to the specifications set forth in Exhibit A.2. Price and Payment TermsThe price for the goods shall be [Amount] per unit, for a total price of [TotalAmount]. Payment shall be made by Buyer in [Currency] within [Number] days of the date of the invoice.3. Delivery TermsDelivery of the goods shall be made by Seller at [DeliveryLocation]. The goods shall be delivered by [DeliveryMethod] within [Number] days of the date of this Contract.4. Inspection and AcceptanceBuyer shall have [Number] days from the date of delivery to inspect the goods. Buyer may reject any goods that do not conform to the specifications set forth in Exhibit A. Buyer shall notify Seller of any non-conforming goods within [Number] days of delivery.5. Title and Risk of LossTitle to the goods shall pass to Buyer upon delivery. Risk of loss shall pass to Buyer upon delivery.6. WarrantiesSeller warrants that the goods shall conform to the specifications set forth in Exhibit A. Seller makes no other warranties, express or implied.7. Governing LawThis Contract shall be governed by the laws of [Country]. Any disputes arising out of or in connection with this Contract shallbe resolved through arbitration in accordance with the rules of [Arbitration Organization].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first written above.[Seller]By: ___________________________Name: _________________________Title: __________________________[Buyer]By: ___________________________Name: _________________________Title: __________________________Exhibit A[Description of goods]篇2International Sales ContractThis International Sales Contract is entered into on [date] by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address], and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address].Whereas, Seller is engaged in the business of manufacturing and selling [products], and Buyer desires to purchase such products from Seller; andWhereas, Seller and Buyer desire to enter into an agreement for the purchase and sale of products on the terms and conditions set forth herein.Now, therefore, in consideration of the covenants and agreements set forth herein, Seller and Buyer agree as follows:1. Product Description: Seller shall sell and Buyer shall purchase the following products: [description of products].2. Quantity: The quantity of products to be purchased under this Contract shall be as agreed upon by Seller and Buyer.3. Price: The price of the products shall be as agreed upon by Seller and Buyer.4. Payment Terms: Payment for the products shall be made in [currency] within [number] days of delivery of the products.5. Delivery: Seller shall deliver the products to Buyer's designated location on the date agreed upon by the parties.6. Inspection: Buyer shall have the right to inspect the products within [number] days of delivery and shall notify Seller of any defects or non-conforming products.7. Warranty: Seller warrants that the products shall be free from defects in materials and workmanship for a period of [number] days from the date of delivery.8. Governing Law: This Contract shall be governed by the laws of [country], and any disputes arising out of this Contract shall be resolved through arbitration in [city], [country].9. Entire Agreement: This Contract constitutes the entire agreement between Seller and Buyer and supersedes all prior agreements and understandings, whether oral or written.In witness whereof, the parties have executed this Contract as of the date first above written.[Seller]By: __________________________ Name: __________________________ Title: __________________________[Buyer]By: __________________________ Name: __________________________ Title: __________________________This International Sales Contract is hereby accepted and agreed to by the parties as of the date first above written.————————————————————————————————————In Chinese:国际销售合同本国际销售合同由[日期]签订，双方为[卖方]，一家依照[国家]法律组织和存在的公司，总部设在[地址]，和[买方]，一家依照[国家]法律组织和存在的公司，总部设在[地址]。
2024年外贸销售合同英文版8篇
2024年外贸销售合同英文版8篇篇1SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [date] by and between [name of exporter/foreign trade company of the People's Republic of China] (hereinafter referred to as the "Seller") and [name of importer/international company] (hereinafter referred to as the "Buyer").1. Product Description:The Seller shall sell and the Buyer shall purchase the following products: [list of products with detailed specifications, quantity, unit price, total value, etc.]2. Terms of Delivery:The products shall be delivered within [agreed period of time]. Delivery terms are EXW (Ex-Works) or as otherwise agreed upon by both parties.3. Price and Payment:The total value of the contracted products is [total contract value]. The payment terms are as follows: [specify payment terms such as T/T (telegraphic transfer), L/C (letter of credit), etc.]4. Quality Inspection:The quality of the products shall be inspected by athird-party inspection agency mutually agreed upon by both parties. The inspection shall be conducted in accordance with the specifications agreed in this Contract.5. Claims:In case of any claim by the Buyer, the Seller shall promptly investigate and resolve the issue in accordance with the terms and conditions stipulated in this Contract. Any claim shall be filed within [specified period] after the arrival of the products at the port of destination.6. Force Majeure:Neither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, wars, riots, etc., beyond its reasonable control.7. Confidentiality:Both parties shall keep confidential all information related to this Contract which is not intended for public disclosure.8. Termination:This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, which cannot be rectified within a reasonable period of time. Termination shall be subject to written notice from thenon-breaching party to the breaching party.9. Dispute Resolution:Any dispute arising out of or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, such disputes shall be submitted to [specified court/arbitration institution] for resolution.10. Miscellaneous:This Contract constitutes the entire understanding and agreement between the Seller and the Buyer concerning the subject matter hereof and supersedes any prior agreements or understandings, whether oral or written, between the parties. No modification or amendment of this Contract shall be bindingunless made in writing and signed by authorized representatives of both parties. This Contract shall be governed by and construed in accordance with the laws of the People's Republic of China.In witness whereof, the Seller and the Buyer have executed this Contract in duplicate originals, each party retaining one original for their respective records.Seller: _____________________ (Authorized Representative)Date: ________________Buyer: _____________________ (Authorized Representative)Date: ________________Note: Please make sure to adapt this contract to your specific needs and circumstances before signing. Legal advice is recommended prior to executing any contract.篇2SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made on [date] by and between [name of the buyer](hereinafter referred to as the "Buyer") and [name of the seller] (hereinafter referred to as the "Seller").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following goods as stated in this Contract: [detailed list of products to be sold with specifications, including product name, model number, quantity, unit price, total value, and any other necessary details].2. Terms of Payment2.1 Payment Term: The total amount due under this Contract shall be paid in [specify currency and payment terms, e.g., US dollars, T/T wire transfer at sight].2.2 Timing of Payment: [describe the schedule of payments including due dates and any applicable terms of installment].3. Delivery3.1 Delivery Period: The Seller shall ensure delivery of the goods within [specify delivery period].3.2 Shipping Terms: The goods shall be shipped from the Seller's port to the Buyer's port via [specify route and mode of transportation, e.g., air, sea, land].4. Quality & Inspection4.1 Quality Assurance: The Seller shall ensure that the goods are in conformity with the quality standards specified in this Contract.4.2 Inspection: The Buyer shall have the right to conduct inspections at the Seller's premises prior to shipment and at the port of discharge after shipment.5. Force MajeureIn case of Force Majeure events causing delay or failure in performance, the Seller shall notify the Buyer promptly and provide evidence thereof. The Seller shall strive to overcome such events and complete performance under this Contract as soon as possible.6. Warranty & Liabilities6.1 Warranty Period: The Seller shall provide a warranty period for the goods specified in this Contract. During this period, any defects in material or workmanship shall be rectified by the Seller at its cost.6.2 Liabilities: If the Seller fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the Buyer as a result of such failure.7. Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute may be submitted to [specify arbitration institution or court] for arbitration/litigation.8. General Terms8.1 Changes: No changes to this Contract shall be made except by a written agreement signed by both parties.8.2 Assignment: Neither party may assign its rights or obligations under this Contract without the prior written consent of the other party.8.3 Entire Agreement: This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed upon in writing by both parties.8.4 Governing Law: This Contract shall be governed by and construed in accordance with the laws of [specify applicable jurisdiction].In witness whereof, the parties have signed this Contract in duplicate with each party holding one original for their respective records and archives.篇3SALES CONTRACT FOR FOREIGN TRADEContract No.: [Insert Contract Number]Date: [Insert Date]BUYER:Name: [Insert Buyer's Full Name]Address: [Insert Buyer's Address]Country: [Insert Buyer's Country]SELLER:Name: [Insert Seller's Full Name]Address: [Insert Seller's Address]Country: [Insert Seller's Country]In consideration of the parties hereby mutually agree to the following terms and conditions for the sale of goods:Article 1: Description of GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Insert detailed description of goods, including product name, specifications, quantity, and unit price].Article 2: Origin of GoodsThe origin of the goods shall be [Insert Origin of Goods].Article 3: Price and Terms of PaymentThe total price for the goods is [Insert Total Price] (Currency). Payment shall be made within ____ (days/weeks/months) upon receipt of invoice. The terms of payment are ____ (e.g., T/T Bank Transfer, L/C, etc.).Article 4: Delivery and ShippingThe delivery date shall be [Insert Delivery Date]. The goods shall be shipped from [Insert Port of Origin] to [Insert Port of Destination]. The risk of loss or damage passes to the Buyer upon delivery to the carrier at the port of origin.Article 5: Quality and InspectionThe Seller shall ensure that the goods are in conformity with the contract specifications. The Buyer shall have the right to inspect the goods prior to shipment. If any discrepancies are found, the Seller shall promptly rectify them.Article 6: Packing and MarkingThe goods shall be properly packed in accordance with customary practices for ocean transportation. All necessary marking and labeling shall be provided. The costs of packing and marking are included in the contract price.Article 7: Terms of ShipmentThe Seller shall choose a reliable carrier for transportation and ensure timely delivery of the goods. The costs of transportation are included in the contract price.Article 8: Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as war, natural disaster, government action, etc. However, the affected party shall promptly notify the other party and provide evidence of such occurrence.Article 9: Warranty and GuaranteeThe Seller guarantees that the goods are free from defects in material and workmanship and conform to the contract specifications. Any defects must be rectified promptly upon notification by the Buyer.Article 10: Claims and DisputesAny claims or disputes arising from or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, the dispute shall be submitted to arbitration in accordance with the rules of [Insert Arbitration Institution]. The arbitration award shall be final and binding on both parties.Article 11: Law ApplicableThis contract shall be governed by and construed in accordance with the laws of [Insert Applicable Law Country].In witness whereof, the parties have signed this contract on the dates indicated below.Buyer: [Insert Buyer's Signature]Date: ____________Seller: [Insert Seller's Signature]Date: ____________This Sales Contract for Foreign Trade is made in English and may be executed in ____ (number) counterparts, each of which shall be deemed an original when signed by both parties. All counterparts shall constitute one and the same agreement.(Signature continues on the following page)篇4SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer:Seller:Name: _____________________________Address: _____________________________Country: _____________________________Buyer:Name: _____________________________Address: _____________________________Country: _____________________________Article 1: Product DescriptionThe Seller shall sell to the Buyer the following products (hereinafter referred to as "Products"): [Detailed list of products, including product name, specifications, quantity, and unit price].Article 2: Contract Price and Payment1. The total contract price for the Products shall be __________ (amount).2. Payment terms: [Detailed payment terms, including payment method, timing of payment, and any conditions related to payment].Article 3: Delivery and Shipping1. Delivery of Products shall be made within ________ (time frame) from the date of signing this Contract.2. Shipping shall be arranged by the Buyer through a recognized carrier/shipper. The Seller shall provide necessary assistance for smooth shipping.Article 4: Quality and Inspection1. The Seller guarantees that the Products shall be in conformity with the agreed specifications mentioned in Article 1.2. The Buyer shall have the right to inspect the Products during production and prior to shipment.Article 5: Terms of Shipment and Risk Transfer1. The risk of loss or damage to the Products shall pass to the Buyer upon delivery to the carrier/shipper.2. Any claims for loss or damage during transit must be filed by the Buyer directly with the carrier/shipper.Article 6: Force MajeureIn case of force majeure events, both parties shall be released from their obligations under this Contract, except for the obligation to make good on already agreed terms. Force majeure events include natural disasters, war, riots, and other events beyond the control of either party.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________ (period) for the Products. During this period, any defects in material or workmanship shall be rectified by the Seller at no additional cost to the Buyer. After-sales service shall be provided as per the terms and conditions agreed by both parties.Article 8: ConfidentialityBoth parties shall keep confidential all information related to this Contract which is not intended for public disclosure.Article 9: Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, the dispute shall be submitted to the court having jurisdiction over the matter.Article 10: General Provisions1. This Contract constitutes the entire agreement between the Seller and the Buyer and supersedes any prior agreements or understandings, oral or written, concerning the subject matter of this Contract.2. No modification or amendment of this Contract shall be valid unless made in writing and signed by both parties.3. This Contract shall be governed by and construed in accordance with the laws of ________ (country).篇5FOREIGN TRADE SALES CONTRACTContract No. [Contract Number]Date: [Date of Signing]Buyer:Name: ________________________Address: _______________________Contact Person: ________________Email: _________________Phone: _________________Seller:Name: _________________________Address: _______________________Contact Person: ________________Email: _________________Phone: _________________This Foreign Trade Sales Contract is made by and between the Buyer and Seller, wherein they agree as follows:Article 1: Product DescriptionThe Seller shall sell the following products to the Buyer:[Product Description including item number, product name, specifications, quantity, and unit price].Article 2: Contract Price & Payment TermsThe total contract price is ____ (currency and amount).Payment terms: The Buyer shall make full payment within __ days upon receipt of the invoice.In case of delayed payment, the Buyer shall pay a penalty of __% per day on the overdue amount.Article 3: DeliveryDelivery shall be made within __ days from the date of receiving the full payment. The Seller shall ensure timely delivery. In case of delay, the Seller shall compensate the Buyer for any losses incurred.Article 4: Quality AssuranceThe Seller guarantees that all products are of good quality, free from defects, and comply with all applicable international standards and regulations. Any defect in material or workmanship shall be rectified by the Seller at its cost.Article 5: Shipping & RisksThe Seller shall arrange for shipping and insurance of the products. Risks shall pass to the Buyer upon delivery to the carrier. Any loss or damage during transportation shall be borne by the Seller.Article 6: Warranty & After-Sales ServiceThe Seller provides a one-year warranty for all products. During this period, any defect in material or workmanship shall be rectified free of charge. The Seller also offers after-sales service and technical support.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this contract, including product details, pricing, and business strategies. Neither party shall disclose such information to any third party without the other party's consent.Article 8: Force MajeureIn case of force majeure events, such as natural disasters, wars, riots, etc., both parties shall strive to resolve the issues and continue fulfilling their contractual obligations. However, any losses incurred due to such events shall be borne by the respective party affected.Article 9: Settlement of DisputesAny dispute arising from or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with itsrules. The arbitration award shall be final and binding on both parties.Article 10: MiscellaneousThis contract is made in English and is subject to the laws of [Country]. Any amendment or modification to this contract must be made in writing and approved by both parties. This contract is valid for both parties and shall be binding on them until fully performed.This contract is executed in __ copies, with each party holding __ copies.In witness thereof, the parties have signed this contract on the date stated at the beginning of this document.Buyer: ____________________________Seller: _____________________________Date: _______________________________ [Signature of Buyer] [Signature of Seller]篇6Foreign Trade Sales ContractContract No.: [合同编号]Date: [签订日期]Buyer: （买方名称和地址）Seller: （卖方名称和地址）THIS CONTRACT is made by and between the Buyer and the Seller: Whereby the Buyer agrees to buy and the Seller agrees to sell the following goods according to the terms and conditions stipulated below: 买方和卖方双方签订本合同，买方同意购买，卖方同意销售以下货物，遵循以下条款：Article 1: Contract Commodities 合同商品The Seller shall sell to the Buyer the following commodity: （商品名称、规格、数量等细节）。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
外贸销售合同范本（英文版）
合约编号：＿＿＿＿＿＿＿＿
ContractNO.＿＿＿＿＿＿＿
售货合约
SALESCONTRACT
－－－－－－－
买方：＿＿＿＿＿
日期：＿＿＿＿年＿＿月＿＿日
Buyers:＿＿＿＿＿cate:＿＿＿＿＿
卖方：＿＿＿＿中国＿＿＿进出口公司＿＿＿省分公司
Sellers:ChinaNationalMetals&MineralsImport& Exportcorporation
,____Branch
双方同意按下列条款由买方购进卖方售出下列商品：
TheBuyersagreetobuyandtheSellersagreetosellthefollowing
goodsontermsandconditionssetforthbelow:
──────────────┬───────┬──────┬──────
（１）货物名称及规格，包装及│（２）数量│（３）单价│（４）总价
装运唛头│││
NameorcommodityandSpeci-│Qoantity│unitprice│Total
ficationsPackingandshpp-│││Amount
ingMarks│││
──────────────┼───────┼──────┼──────
（装运数量允许有％的增减）│││
（ShipmentQoantity%more│││
orlessallowd│││
──────────────┴───────┴──────┴──────
（５）装运期限
TimeofShipment:
（６）装运口岸
PortsofLoading
（７）目的口岸
PortofDestination:
（８）保险：投保＿＿＿险，由＿＿＿按发票金额＿＿＿％，投保
Tnsurance:Covering Risksfor____%ofInvoiceValuetobeeffected
bythe
（９）付款条件：＿＿＿……
TermsofPayment:＿＿＿凭保兑的，不可撤消的，可转让的，可分割的即期付款信用证，信用证以中
国五金矿产进出口公司＿＿分公司为受益人并允许分批装运和转船。
Byconfirmedirrevocable,transferableanddivisibleletterofcredit
infavourofChinaNationalMetals&MineralsImport& ExportCorporation
___Branchpayableatsightallowingpartialshipmentsandtranshipment.
该信用证必须在＿＿＿前开到卖方，信用证的有效期应为装船期后１５天，在上述装运口岸到期，
否则卖方有权取消本售货合约并保留因此而发生的一切损失的索赔权。
注意：开立信用证时，请在证内注明本售货确认书号码ChinaNationalTextiesImportand
ExportCorporation
IMPORTANT:WhenestablishingL/C,please
indicatethemumberofthisSalescofr SHANTUNGBRANCH
mationintheL/C.
买方（TheBuyers）：＿＿＿＿＿
卖方（TheSellers）：＿＿＿＿＿
请在本合同签字后寄回一份存档
Pleasesignandreturnonecopyforoutfile.。