VOLVO各机型技术参数

合集下载

TAD731GE发动机参数VOLVO沃尔沃

TAD731GE发动机参数VOLVO沃尔沃沃尔沃TAD731GE发动机是沃尔沃集团旗下的一款高性能柴油发动机，具有高效、可靠和环保等特点。

下面是关于该发动机的详细参数说明：1.发动机型号：TAD731GE-"TAD"是沃尔沃柴油发动机的命名方式；-"73"代表发动机排量的75.3升；-"1"表示发动机系列的第一个版本；-"GE"意味着这是一台高性能柴油发动机。

2.排量：7.3升沃尔沃TAD731GE发动机的排量为7.3升，是一种中型柴油发动机，可以适用于各种用途，包括工业、发电和船舶等。

3.缸数和排列方式：6缸行列（直列）该发动机采用6缸直列排列，具有更高的功率输出和更平稳的运行。

4.进气方式：涡轮增压5.压缩比：17:1发动机的压缩比是指气缸内气体被压缩的程度，沃尔沃TAD731GE发动机的压缩比为17:1，这是一个相对较高的数值，有助于提高燃料燃烧效率和动力输出。

6.最高功率输出：200kW（272马力）7.最大扭矩：1100Nm发动机的最大扭矩为1100牛米，代表发动机在低转速时提供的最大动力输出。

8.燃料消耗率：202g/kWh沃尔沃TAD731GE发动机的燃料消耗率为202克每千瓦小时，表示每消耗1千瓦小时的能量所需的燃料消耗量。

9.应用领域：工业、发电、船舶等10.环保特点：符合欧洲排放标准沃尔沃TAD731GE发动机符合欧洲的排放标准，采用了先进的排放控制技术，能够有效减少废气排放，降低对环境的污染。

总结：沃尔沃TAD731GE发动机是一款高性能柴油发动机，具有7.3升排量、6缸直列排列、涡轮增压进气、17:1的压缩比等特点。

最高功率输出为200kW，最大扭矩为1100Nm，燃料消耗率为202g/kWh。

该发动机适用于工业、发电和船舶等多个应用场景，并且符合欧洲的排放标准，具备环保的特点。

沃尔沃S80L 2010款25T 智雅版汽车参考资料手册

1. 沃尔沃 S80L 2010款2.5T 智雅版汽车参考资料手册1.1. 导购综述市场影响力1.2. 参数资料详细介绍基本资料参考价格￥41上市日期2009年11月汽车类型三厢轿车豪华级别中大型车尺寸重量容积全车长度4991 mm车身宽度1861 mm车身高度1490 mm轴距2976 mm轮距1588/1585 mm（前/后）车身重量1745 kg行李舱容积480 L油箱容积70 L标准座位数5引擎参数标准引擎 2.5T 直列5缸，涡轮增压，横置标准变速器手自一体 6档标准排量 2.5 升</td></tr>气门数20最大功率147/4800 KW/rpm最大扭矩300/1500-4500 N m/rpm燃油系统电子燃油喷射式理论油耗11.0 升最高时速210 km/h加速时间8.6 秒（百公里加速）排放标准欧Ⅳ标准转向悬挂轮胎驱动方式前置前驱制动方式碟/碟转向助力助力转向式悬挂方式麦弗逊式独立悬架/多连杆独立悬架（前/后）轮毂尺寸17”CANICULA铝合金轮毂轮胎225/50R17 W通过性最小转弯半径 6.3 米CPU型号125 mm配置外观内饰电动天窗,铝合金轮圈,米其林Pilot Preceda轮胎,前排侧窗带斥水功能,前风挡玻璃上沿深色遮阳带,钢化玻璃侧窗,双排气尾管,尾标‘2.5T’,侧窗亮条装饰,卤素大灯，带调节器,自动防眩目车内后视镜,前雾灯,后雾灯,高位刹车灯,可折叠电动外后视镜,地面照明灯,侧面定位灯,后雾灯自动熄灭,安全取车照明,安全返家照明,后窗电动遮阳帘,真皮方向盘，带金属镶嵌,侧窗遮阳帘,镀铬控制旋钮,豪华加厚脚垫,拉丝铝内饰条,真皮包覆换档手柄，带金属镶嵌,前排中央扶手,行政级后排中央扶手,后排ISOFIX儿童座椅固定系统,电动驾驶员座椅，带可记忆调节,机械式可调副驾驶座椅,MP3输入端子,单碟CD播放机,高性能级音响系统，8喇叭8个,USB/iPod插口,方向盘带音响控制按钮舒适性GPS卫星导航系统,IDIS智能驾驶信息系统,蓝牙免提系统,全自动双区空调,车外温度显示,车载冰箱,点烟器,花粉过滤器,行车电脑,烟灰缸,前排化妆镜带照明,中文仪表显示,210 km/h限速,镀铬空调风向按钮及出风口,可锁闭手套箱,转速表,前门储物空间,简体中文车主手册,组合仪表,中央控制台前后储物空间,时钟安全防盗驾驶座安全气囊,副驾驶座安全气囊,IC安全充气帘,前排SIPS防侧撞安全气囊,电子儿童安全锁，后侧门,遥控式中控锁系统,防盗报警装置,燃爆式安全带带预紧装置,防盗螺栓,后驻车辅助系统,17”刹车系统,前排WHIPS头颈保护系统,行李箱私人闭锁功能,乘客安全气囊切断开关,三角警示牌,紧急制动灯带闪烁功能,ABS防抱死制动系统,EBA紧急制动辅助系统,IDIS智能驾驶信息系统,起步释放装置,DSTC动态稳定及牵引力控制系统,舒适型底盘,巡航控制,电子驻车制动其他功能发电机，150A,临时备胎,蓄电池，700A,千斤顶1.3. 新闻资讯和讯网 - 2010年10月19日特定人群购车 S40最高优惠可达近10万近日，爱卡汽车编者从北京中汽南方亦庄沃尔沃 4S店获悉，店内针对特定人群（政府实体、公务员、媒体及媒体工作者等）推出多款特价车型，分别为S402.0L智雅版、S402.5T ...新浪网 - 2010年10月15日沃尔沃北京十月特惠 S40与S80降5.3-9.82万沃尔沃汽车通过近百年的耕耘，一直致力于安全、环保、科技领域的创新，在安全和环保领域的全球领先地位使之成为最受尊敬的豪华品牌之一。

沃尔沃XC60车型技术解读

一般来讲，燃油蒸发控制系统（EVAP）通常只在低负载状态下接通，例如平稳驾驶或怠速运行时，这是因为在这些情况下，系统可充分利用发动机进气歧管中的负压产生排放流量，将炭罐内的燃油蒸气引入燃烧室。但通过研究发现，当炭罐在某些低负载条件下接通时，也会对尾气排放产生负面影响。因此，为了应对更为严格的排放法规，新一代VEA发动机采用了Dual Purge系统，使得炭罐在增压状态下也可以工作。
上一代发动机采用了电子调节式节温器，其目的是通过可调节的冷却液循环流
量来提升效率并降低排放，但从实际效果来看，并未达到预期，反而造成了机油消耗量的增加。因此，新一代发动机改回了蜡式节温器，其开启温度为90℃。新发动机油底壳的外观也发生了改变，不再有2个向后的隆起，所以机油容量降低了0.3 L，变更为5.6 L。
挡位
1 1（发动机制动时）
2 3 4 5 6 7 8 倒挡
表2 各挡位执行元件工作情况
离合器
C1
C2
C3
C4
●
●
●
●
●
●
●
●
●●●源自●●●●
制动器 B1 B2
● ●
单向离合器 F1 ● ●
● ●
为了控制这些执行元件，TG-81SC自动变速器在阀体内集成了9个电磁阀，其位置如图6所示。其中，SL1～SL5为线性压力电磁阀，其阀芯位置由变速器控制单元（TCM）通过脉冲宽度调制（PWM）信号控制，断电后电磁阀闭合。电磁阀 SL1～SL4分别无级控制离合器C1～C4，电磁阀SL5则无级控制制动器B1。电磁阀 S1和S2为开关型设计，由TCM向其提供 12 V电压，断电后电磁阀闭合。
图5 TG81-SC自动变速器结构原理图

G990沃尔沃自行式平地机

率先采用11速平地机变速箱备选的volvohte1160有11档前进速度和6档倒退速度它增加了平地机的档位可以在低速时提供更多的控制模式在高速时提供效率更高的行走速度在工作范围内提供更高的精确性并为每一种作业都提供超强的燃油效能
沃尔沃自行式平地机
G970\G976\G990
更多关怀：更多理念
采用 D9 发动机的 G900 自行式平地机系列满足了您对沃尔沃。价值的所有期望。
液压系统的设计实现了从油箱的顶部快速手动或者压力加油。补给的所有液体必须流经一个大型的全流量回油过滤器，以防止水箱意外污染而可能导致设备停机。软管布设在车架表面，便于检查。
沃尔沃冷却模块解决了冷却芯之间的叠放问题。相反，多个冷却芯被固定，用以持续接收新鲜、凉爽的外界空气。恒温调节、液压驱动的风扇可使功率最大，燃油消耗最低。备选的自动换向冷却风扇可以进行持续的自我清洁，进一步提高了冷却性能，减少了维修需求。
自信的质量
无论哪里都没有一个自行式平地机系列比Volvo G900自行式平地机更能经受住严格的测试。通过不断倾听、回应用户的需要和投资于设计创新，沃尔沃持续的改进方案使得 G900 系列的质量一直处于领先地位。
沃尔沃车队，家的感觉
从前到后，从下至上，G900 自行式平地机都合乎需要，非常完美，能够在您的车队中占据一席之地。设计细节和风格为所有沃尔沃机器的主人和操作人员从里到外提供了舒适的工作环境。
Volvo APR 行星减速轴和操作人员控制的液压离合差速器锁可以有效地向地面提供动力，同时保证了可靠的长使用寿命。G900自行式平地机的每一个细节都反应了沃尔沃的持久价值承诺。
日复一日
对于沃尔沃，其细节导致了日常可靠性的不同：四根动力超强的液压软管；封闭的电路连接器；仪表盘保险丝连接；驾驶室内部保持清洁、干燥；高质量的液压联轴节和巧妙的线路和软管布局可以防止磨损。通过每一个操作细节，Volvo Contronics 监控装置对所有重要的功能提供了三级警报系统，进行持续的监控，包括作为标准配置的发动机保护功能。

VOLVO 重卡整车参数1

Important NotesChassis DimensionsCab Height: -115 mm for L1EH1, +404 mm for L2H2, +542 mm for L2H3. Front Axle to Back of Cab: -436 mm for L1EH1.D-measure includes a front clearance of 50 mm and for rigid trucks also a subframe of 100 mm.Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.All dimensions are for unladen chassis and any tag axles down.Weight and dimensions are based upon the following tyres: Chassis weight includes oil, water, AdBlue, 70 litres fuel and without driver. Kerb weight can vary ± 1.5%.Turning diameters are theoretically calculated.Legal weights can differ from country to country.For more detailed weight information, including optional equipment weights, ask your Volvo sales contact to enter your specification into the Volvo WeightChassis Dimensions [mm]WB Wheelbase 3000320034003600A Overall Chassis Length 6537673769377137D Centre of rear axle to back of cab 2004220424042604T TheoreticalWheelbase 3685388540854285Chassis Weights [kg]Front Axle 5175518551955210Rear Bogie 4425427542804290Kerb Weight 9600946094759500Turning Diameter [mm]Turning Circle Diameter Kerb to Kerb 13000136001430014900Turning Circle Diameter Wall to Wall 14700153001590016600Plated Weights [kg] Plated DesignGross Vehicle Weight 2500033100Gross Combination Weight 49000100000Front Axle 70007100Rear Bogie 1800026000Cab 2495■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS). Core components□ L1EH1 Day cab ■ L2H1 Sleeper cab □ L2H2 Sleeper cab with high roof, Globetrotter □ L2H3 Sleeper cab with extra high roof (+140 mm), Globetrotter XL(FH) / LXL (FM) cabs ■ EU3 Euro 3 Engine emission level.■ D13A400 Diesel engine, 13 litre, 400 hp, 2000 Nm. □ D13A440 Diesel engine, 13 litre, 440 hp, 2200 Nm. □ D13A480 Diesel engine, 13 litre, 480 hp, 2400 Nm. □ D13A520 Diesel engine, 13 litre, 520 hp, 2500 Nm.□ D13C420 Diesel engine, 13 litre Euro 5 SCR, 420 hp, 2100 Nm □ D13C460 Diesel engine, 13 litre Euro 5 SCR, 460 hp, 2300 Nm □ D13C500 Diesel engine, 13 litre Euro 5 SCR, 500 hp, 2500 Nm □ D13C540 Diesel engine, 13 litre Euro 5 SCR, 540 hp, 2600 Nm■ EBR-EPG Engine brake, exhaust pressure governor□ EBR-EPGC Engine brake, exhaust pressure governor for I-shift□ EBR-VEB Engine brake, Volvo Engine Brake (incl. exhaust pressure governor)□ EBR-VEB+ Engine compression brake, Volvo Engine Brake+ (VEB+), incl. Exhaust Pressure Governor (EPG).□ EBR-VGT Engine brake, Variable Geometry Turbo□ AT2412C I-Shift, 12 speed, 2400 Nm, max. permitted GCW 44000 kg, fully automated electronically controlled gearshift and clutch, without clutch pedal.□ AT2412D I-Shift, 12 speed, 2400 Nm, max. permitted GCW 44000 kg, fully automated electronically controlled gearshift and clutch, without clutch pedal.□ AT2512CI-shift, 12 speed, 2500 Nm, max. permitted GCW 100000 kg and fully automated electronically controlled gearshift and clutch, without clutch pedal.(Only combinations with T-FLAT and rear axle ratios higher than or equal to 3.61 give GCW 100000 kg, others 80000 kg.) □ AT2612D I-Shift, 12 speed, 2600 Nm, max. permitted GCW 60000 kg, fully automated electronically controlled gearshift and clutch, without clutch pedal.□ ATO2512CI-shift overdrive, 12 speed, 2500 Nm, max. permitted GCW 60000 kg, for use with hub reduction axles. Fully automated electronically controlled gearshift and clutch, without clutch pedal.□ ATO2612DI-shift overdrive, 12 speed, 2600 Nm, max. permitted GCW 60000 kg, for use with hub reduction axles. Fully automated electronically controlled gearshift and clutch, without clutch pedal.□ PT2606 Powertronic 6-speed automatic gearbox, 2600 Nm ■ VT2214B Manual split range gearbox 2400 Nm, 14 speed □ VT2514B Manual split range gearbox 2500 Nm, 14 speed □ VT2814B Manual split range gearbox 2800 Nm, 14 speed□ VTO2214B Manual split range gearbox 2400 Nm with overdrive, 14 speed □ VTO2514B Manual split range gearbox 2500 Nm with overdrive, 14 speed □ VTO2814B Manual split range gearbox 2800 Nm with overdrive, 14 speed □ TP-BAS City gear changing software□ TP-DICON Distribution and Construction optimized gear changing software□ TP-FUEC Fuel optimized gear changing software □ TP-HDHeavy Duty gear changing software□ AMSO-AUT Manual gear shift in automatic mode, (I-Shift). □ AMSO-BAS Basic gear shifting (I-Shift). □ AVO-BAS Basic vocational I-shift software (not for version C)□ AVO-ENH Enhanced vocational I-shift software, construction & timber adapted (not for version C)□ CD40B-O Double disc clutch, diameter 400 mm □ CS43B-O Single disc clutch, diameter 430 mm■ CS43B-OR Single disc clutch, diameter 430 mm, reinforced; version B ■ FAL7.1 Front axle load 7.1 tonnes □ FAL7.5 Front axle load 7.5 tonnes □ FAL8.0 Front axle load 8.0 tonnes □ FAL8.5 Front axle load 8.5 tonnes □ FAL9.0 Front axle load 9.0 tonnes□ FST-MULFront leaf suspension, conventional spring■ FST-PAR Front leaf suspension, parabolic spring □ FST-PAR3 Front leaf suspension, stiff parabolic spring □ FSTAB Front stabilizer, normal stiffness■ FSTAB2 Front stabilizer, medium high stiffness □ FSTAB3 Front stabilizer, stiff■ RADD-TR1 Rear leaf suspension (6x4/8x4), T-ride narrow, 75 mm wide leafs□ RADD-TR2 Rear leaf suspension (6x4/6x6/8x4), T-ride wide, 90 mm wide leafs.■ RT2610HV Rear tandem axle, hub reduction, 3 planet gear, bogie load 26 tonnes, GCW 100 tonnes□ RT3210HV Rear tandem axle, hub reduction, bogie load 32 tonnes, GCW 100 tonnes□ RTS2370A Rear single reduction tandem, bogie load 23 tonnes, GCW 70 tonnes□ RAL23 Bogie load 23 tonnes ■ RAL26 Bogie load 26 tonnes □ RAL32 Bogie load 32 tonnes□ RST-MUL Rear leaf suspension, conventional spring ■ RST-PAR1 Rear leaf suspension, parabolic spring □ RALIM15First rear drive axle load limiter, 15.0 tonnesPackages■ AUDBAS Audio basic□ AUDMED+Audio medium plusTruck use□ ADR2 ADR adaptation, transportation of dangerous goods, 2 switches.□ PSCOOL Power steering cooler. ■ STWPOS-LLeft hand driveChassis■ BRAKE-ZV Volvo Z-cam brakes□ AUXPARK Auxiliary parking brake (2 extra parking brake chambers) ■ ABS-WHL ABS, Anti-lock brake system ■ FRAME88 Frame section thickness 8 mm■ FIL-TXEB Inner liner from transmission member to bogie end. ■ FRAMEHIG Frame rail section height, 300 mm ■ BBOX-L Battery box on left hand side ■ 2BATT170 Batteries 2x170 Ah □ 2BATT225Batteries 2x225 Ah□ BAMAFREE Maintenance free batteries ■ R405A71 Right aluminium 710 mm D-shaped fuel tank, 405 litres volume.Usable volume is 97% of stated volume. Min volume 150lMax volume 810l ■ UL-FUEL Without left fuel tank Min volume 160l Max volume 450l ■ FCAP-L Lockable fuel tank cap■ ESH-LEFT Muffler horizontal, left exhaust outlet □ ESH-REAR Muffler horizontal, rear exhaust outlet □ ESH-RIGH Muffler horizontal, right exhaust outlet□ ESH-VERT Muffler horizontal, vertical exhaust outlet on right hand side □ ESV-VERT Muffler vertical, vertical exhaust outlet on right hand side □ SWCP-BC Spare wheel carrier, behind cab■ SWCP-LB Spare wheel carrier, on left hand side partly under battery box □ SWCP-LF Spare wheel carrier, on left hand side in front of rear axle □ SWCP-T Plastic strips strapped to the chassis used as a temporary spare wheel carrier.□ SWCP-TPSpare wheel carrier transport mounted on top of frame■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS). □ WHC-TRP2 Two foldable wheel chocks delivered loose in cab □ WHCHOCK2 Two foldable wheel chocks □ TB-L80 Toolbox 800 mm, left side □ TB-R80 Toolbox 800 mm, right side □ SUP-BAS Standard side underrun protection □ CHAIN-SSnow chains□ TOWR-ONE One rear towing device ■ RFEND-BRear fenders, basic (3 piece fender with anti-spray function)Rims and Tyres□ WL-AL Aluminium rims□ WL-ALDP Dura-Bright aluminium rims, front-drive□ WL-ALDPD Dura-Bright aluminium rims, dual holes, front-drive □ WL-ALDU Aluminium rims, dual holes □ WL-ALP Polished aluminium rims□ WL-ALPDU Polished aluminium rims, dual holes ■ WL-ST Steel rims□ SPWT-D Spare wheel&tyre equal to drive wheel ■ SPWT-F Spare wheel and tyre equal to front wheel □ WCAPWheel capsPowertrain equipment■ 1COMP530 Single cylinder air compressor 318 cc □ 2COM1080 Dual cylinder air compressor 704 cc □ 2COMP900 Dual cylinder air compressor 636 cc ■ AIRIN-HI High air intake □ AIRIN-LO Low air intake□ ACL1ST-S Air cleaner with additional filter element□ 24AL120B Alternator 120 Ampere □ 24AL150B Alternator 150 Ampere■ 24ALT-HB Alternator 80 Ampere (D13/16) / 90 Ampere (D9/D11) □ 24ALT-XB Alternator 110 Ampere□ CCV-C Closed crankcase ventilation.□ CCV-OX Crank case ventilation for cold markets □ COOLC40 Cooling capacity 40°C, ATB ■ COOLC48 Cooling capacity 48º C, ATB□ TC-HWO Oil cooler for hydraulic transmissions – water/oil□ TC-MAOH2Oil cooler/mechanical transmission, air/oil, extra high performance■ TC-MWO Oil cooler for mechanical transmissions, basic performance,without retarder – water/oil□ TC-MWOH2 Oil cooler/mechanical transmission, water/oil, highperformance □ TRAP-HDSteel gearbox range housing, heavy duty. □ FUEQ-EH Fuel line electric heater■ AF-E Auxiliary fuel filter, electrically heated ■ EST-AID Engine start pre heating element□ PTER-DIN Power Take Off / splined shaft groove (female) DIN5462. □ PTER1400 Rear engine mounted power-take-off with flange SAE 1410 □ HPE-F101 Hydraulic pump F1-101, fixed displacement, single flow, rear engine mounted.□ HPE-F41 Hydraulic pump F1-41, fixed displacement, single flow, rear engine mounted.□ HPE-F51 Hydraulic pump F1-51, fixed displacement, single flow, rear engine mounted.□ HPE-F61 Hydraulic pump F1-61, fixed displacement, single flow, rear engine mounted.□ HPE-F81 Hydraulic pump F1-81, fixed displacement, single flow, rear engine mounted.□ HPE-T53 Hydraulic pump F2-53/53, fixed displacement, double flow, rear engine mounted.□ HPE-T70Hydraulic pump F2-70/35, fixed displacement, double flow, rear engine mounted.□ HPE-V120 Hydraulic pump VP1-120, variable displacement, single flow, rear engine mounted.□ HPE-V45 Hydraulic pump VP1-45, variable displacement, single flow, rear engine mounted.□ HPE-V75 Hydraulic pump VP1-75, variable displacement, single flow, rear engine mounted.□ PTPT-D DIN connection PTO, Powertronic □ PTPT-F Flange connection PTO, Powertronic□ PTR-D DIN connection PTO, low speed, manual gearbox □ PTR-DH DIN connection PTO, high speed, manual gearbox □ PTR-DM DIN connection PTO, medium speed, manual gearbox □ PTR-F PTO, 1 rear flange connection□ PTR-FH Flange connection PTO, high speed, manual gearbox □ PTR-FL Flange connection PTO, low speed, manual gearbox □ PTRD-D Power take-off with 1 front DIN connection + 1 rear DIN connection, manual gearbox□ PTRD-D1 Power take-off with 1 front DIN connection + 1 rear flange connection, manual gearbox□ PTRD-D2 Power take-off with 1 front DIN connection and 2 rear flange connections, manual gearbox□ PTRD-F Power take-off with 1 rear flange connection, manual gearbox □ APF-BAS Basic I-shift PTO functions□ APF-ENH Enhanced I-shift PTO functions□ HPG-F101 Hydraulic pump F1-101, fixed displacement, single flow, gearbox mounted.□ HPG-F41 Hydraulic pump F1-41, fixed displacement, single flow, gearbox mounted.□ HPG-F51 Hydraulic pump F1-51, fixed displacement, single flow, gearbox mounted.□ HPG-F61 Hydraulic pump F1-61, fixed displacement, single flow, gearbox mounted.□ HPG-F81 Hydraulic pump F1-81, fixed displacement, single flow, gearbox mounted.□ HPG-V120Hydraulic pump VP1-120, variable displacement, single flow, gearbox mounted.Cab exterior■ BUMP-S Front steel bumper.□ BUMP-SC Front steel bumper, construction applications. □ GUARD-EH Guard plate for cooling pipes and oil sump □ CABS-FUA Full air cab suspension■ CABS-MEC Mechanical cab suspension□ CABS-REA Cab suspension, rear air and front mechanical □ AD-ROOF Roof air deflector□ AD-ROOFB Roof air deflector with light box □ AD-SIDEL Long cab side air deflector □ AD-SIDES Short cab side air deflector. □ LADDERLadder back of cabSuperstructure preparations□ 5WM-ISHD 5th wheel ISO mounting, heavy duty, 16 mm mounting plate ■ 5WM-ISOHFifth wheel ISO mounting, high Z-profiles (t=8 mm) for 10 mm ISO saddle.Z-profile height above frame = 80 mm. Total height above frame 90 mm. ■ 5WH150 Fifth wheel leg-height 150 mm □ 5WH185 Fifth wheel leg-height 185 mm □ 5WH190 Fifth wheel leg-height 190 mm□ 5WT-GF George Fischer SK-S 36.20 V cast fifth wheel□ 5WT-GFHD Georg Fischer SK-HD 38.36 cast heavy duty fifth wheel ■ 5WT-JOJost cast fixed fifth wheel.Type JSK 37C for 5WM-ISOL/5WM-ISOM/5WM-ISOH, LUB-CENT.Type JSK 37E for 5WM-LPRO, LUB-CENT.Type JSK 42K for all fifth wheel mountings with ULUBCENT. □ 5WT-JOHDJost JSK 38C cast heavy duty fifth wheel■ RAMP-LOW Ramp sliding member, low height□ RAMP-MED Ramp sliding member, medium height ■ RDECKRear deck, basic□ RDECK-M Rear deck, medium□ WL-TA1A Working lamp trailer arch, 1 lamp amber■ WL-TA1W Working lamp trailer arch, 1 lamp white■ TBC-EC European Community trailer brake connection□ TRCON145 Trailer cable connection 14-pin connector for ADR vehicles(ADR).□ TRCON147 Trailer cable connection 14-pin connector without ADR(UADR).□ TRCONKOR Trailer cable connections for Korea□ TTRCON15 Trailer cable connections for ADR□ TTRCON7 Trailer cable connections, UADR■ TTRCON77 Trailer cable, two connections, UADR■ TRBR-HCF Hand controlled trailer brake, full pressure□ TRBR-HCR Hand controlled trailer brake, reduced pressure□ TAILPREP Taillift preparation kit■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).。

进口沃尔沃柴油发动机挖掘机产品性能说明书

驾驶室
8个位置可调，适应不同体型操作手
Volvo Construction Equipment
驾驶室
宽阔的视野
Volvo Construction Equipment
驾驶室
Volvo Construction Equipment
驾驶室
内部加压，13个出风口，超强加热制冷能力
Volvo Construction Equipment
物有所值
• 标准配置LC车架 • Volvo电控直喷柴油发动机 • 标准配置了斗杆、动臂、回转优先系统 • 标准配置了斗杆、动臂保持阀 • 回转摆动防止阀 • 标准配置了多路阀备用阀（破碎锤等） • 标准配置了自动加油机 • 三套控制电脑 • 自动恒温驶室空调 • 钢板布式硬度达到400的高耐磨岩石铲斗 • 标准配置了所有辅助阀 • 众多优化设计（集中润滑、快速换油、防滑板）
挖掘装置
同行业布氏硬度最高钢板，大截面设计机器人焊接而
Volvo Construction Equipment
挖掘装置
标准装备重载型大臂，小臂，岩石型铲斗
Volvo Construction Equipment
挖掘装置
油缸行程长，工作范围
同行业最大铲斗回转角
Volvo Construction Equipment
Volvo Construction Equipment
宁波日兴动力科技有限公司
Volvo Construction Equipment
Volvo Construction Equipment
EC55B
EC140BLC
EC210BLC
EC240BLC
EC290BLC
EC700BLC

VOLVO S60车型手册

独有运动能量，魅力澎湃释放
标准配置表
车型
T5 R–Design 个性运动版
安全性
City Safety 增强版城市安全系统
S
带全力自动刹车的行人和自行车碰撞侦测系统
S
FAHB 全智能主动式远光灯
S
ACC 自适应巡航系统带排队功能
S
LDW 车道偏离警告系统
–
LKA 车道保持辅助系统
S
DAS 驾驶员疲劳警示系统
T5 R–Design 个性运动版
T6 R–Design 个性运动版
1595
4635/1865/1484 2776 67.5 380 136
1711
Drive–E T5 2.0L 4 缸涡轮增压发动机
T6 3.0L 直列 6 缸涡轮增压发动机
1969
2953
8 速手自一体变速箱
Geartronic 6 速手自一体变速箱
S
AUX 辅助音响输入插口
S
USB & IPOD 接口
S
方向盘带音响控制按钮
S
蓝牙免提娱乐系统
S
轮毂
R–Design 18'' Ixion 运动轮毂
S
“S”— 标准配置 “O”— 选装配置
S S S S S S S
S S S S
S – – – S S S – S S S S S
S S S S – S S S S S S
S
R–Design 迎宾踏板
S
空调系统
双区自动空调系统SFra bibliotekIAQS 车内空气质量控制系统
S
CZIS 主动式座舱清洁系统
S
花粉过滤器

沃尔沃挖掘机参数型号大全

沃尔沃挖掘机型号大全1、EC140B Prime性能参数（0.5-0.93m³）EC140B Prime 性能参数发动机Volvo D4D额定功率转速35 r/s (2 100 r/min) ISO 9249/SAE J1349 net 69 kW (94 metric hp) 挖掘力87.3 kN铲斗容积0.55 - 0.93 m3最大挖掘距离8.8 m最大挖掘深度 6.0 m底盘处的举升能力 3.9 t举升距离/高度 6.0 / 1.5 m运行重量13.4 - 15.6 t2、EC200B Prime挖机（0.8-0.9m³）3、EC210B 性能参数(0.75-1.55m³)EC210B 性能参数发动机Volvo D6D额定功率. r/s (r/min) 32 (1 900) ...ISO 9249/DIN 6271. kW (hp) 107 (143)铲斗容积. m30.75 – 1.55 最大挖掘距离. m 9.9底盘处的举升能力. t 6.6 – 7.1 举升距离/高度. m 6.0 / 1.5运行重量. t 20.9 – 22.3 挖掘力 SAE. kN 130.4挖掘力 ISO. kN 147.14、EC210B Prime 性能参数（0.92m³）EC210B Prime 性能参数发动机Volvo D6E额定功率转速30 r/s (1 800 r/min) ISO 9249/SAE J1349 net 110 kW (150 metric hp) 挖掘力130.4 kN铲斗容积0.92 m3最大挖掘距离9.9 m最大挖掘深度 6.7 m底盘处的举升能力7.0 t举升距离/高度 6.0 / 1.5 m运行重量20.4-23.7 t5、EC290B 性能参数（0.9-2.1m³）EC290B 性能参数发动机Volvo D7D 额定功率. r/s (r/min) 32 (1 900) ...ISO 9249/DIN 6271. kW (hp) 143 (192) 铲斗容积. m30.95-2.1 最大挖掘距离. m 10.7最大挖掘深度. m 7.3底盘处的举升能力. t 10.8举升距离/高度. m 6.0 / 1.5 运行重量. t 28.5-30.0 挖掘力 SAE. kN 172.6挖掘力 ISO. kN 198.46、EC360B 性能参数（1.35-3.0m³）EC360B 性能参数发动机Volvo D12D 额定功率. r/s (r/min) 28 (1 700) ISO 9249/DIN 6271. kW (hp) 184 (247) 铲斗容积. m3 1.35–3.0 最大挖掘距离. m 11.2最大挖掘深度. m 7.5底盘处的举升能力. t 11.0 – 11.3 最高处的举升能力. m 7.5 / 1.5 运行重量. t 37.5 – 39.2 挖掘力 SAE. kN 209挖掘力 ISO. kN 2367、EC360B Prime 性能参数（1.61-1.84m3）EC360B Prime 性能参数发动机Volvo D12D额定功率转速28 r/s (1 700 r/min) ISO 9249/SAE J1349 net 184 kW (250 metric hp) 挖掘力209 kN铲斗容积 1.61-1.84 m3最大挖掘距离11.1 m最大挖掘深度7.5 m底盘处的举升能力11.3 t举升距离/高度7.5 / 1.5 m运行重量36.5-38.7 t8、EC460B 性能参数（1.8-3.73 m3）EC460B 性能参数发动机Volvo D12D 额定功率. r/s (r/min) 30 (1 800) ISO 9249/DIN 6271. kW (hp) 235 (316)铲斗容积. m3 1.8–3.73最大挖掘距离. m 12.0最大挖掘深度. m 7.7底盘处的举升能力. t 13.8最高处的举升能力. m 7.5 / 1.5运行重量. t 45.1 – 46.6 挖掘力 SAE. kN 244.2挖掘力 ISO. kN 276.59、EC460B Prime 性能参数EC460B Prime 性能参数发动机Volvo D12D额定功率转速30 r/s (1 800 r/min) ISO 9249/SAE J1349 net 235 kW (320 metric hp) 挖掘力244.2 kN铲斗容积 2.1-2.6 m3最大挖掘距离12.0 m最大挖掘深度7.7 m底盘处的举升能力13.8 t举升距离/高度7.5 / 1.5 m运行重量44.3-47.9 t10、EC700B 性能参数（2.48–6.6m3）EC700B 性能参数发动机Volvo D16E EAE3额定功率. r/s (r/min) 30 r/s (1 800 r/min) 铲斗容积. m3 2.48–6.6m3最大挖掘距离. m 11.5 m最大挖掘深度. m 7.3 m底盘处的举升能力. t 20.0 t举升距离/高度. m 7.5 / 1.5 m运行重量. t 68.3 – 70.6 t。

发电机组规格型号(国内外常用品牌)

国内外各品牌发电机组规格型号进口品牌沃尔沃柴油发电机：该机组是采用瑞典沃尔沃集团公司所生产的沃尔沃遍达柴油发动机配制斯坦福无刷发电机组制而成的。

沃尔沃柴油发电机组除了低油耗、低排放、低噪音、结构紧凑等特点外，该机组还具有高度的承受加载能力、快捷和可靠的冷启动性能，运行费用低。

功率范围68-500KW。

因沃尔沃柴油发动机性能可靠、绿色环保、马力强劲、人性化的安全设计和遍布世界各地的服务网点深受全球用户的青睐。

沃尔沃公司是世界上历史最悠久的发动机生产商之一，同时是世界上唯一一家专注于4缸和6缸柴油机的生产商，技术上傲视群雄。

VOLVO/沃尔沃柴油发电机组技术参数(因技术不断进步，数据仅供参考)沃尔沃发电机控制系统功能介绍沃尔沃柴油发电机控制系统具有最基本的保护功能，具体如下：1、对柴油机的保护：冷却液高温、油压高或低、柴油机超速、超负载等报警并停机功能；2、对发电机的保护：单/三相过电压、欠电压、缺相、过电流、逆功率和相序错误保护；3、测量功能：机组累计使用时间、总发电机功率、电池电压、冷却液温度、机油压力等；4、全自动化机组控制系统：除具备以上功能外，还具有三遥（遥控、遥测、遥信）功能，并具备计算机接口，可与上位机通信实现无人值守。

沃尔沃发电机配置标准•VOLVO PENTA柴油发动机•马拉松无刷交流发电机(或另选其他品牌)•英国深海控制系统(可以选择其他品牌控制器)•密封高能蓄电池及专用连接线•原装冷却液水箱•原装三滤系统(空气滤芯、机油滤芯、柴油滤芯)•工业级消声器•全钢结构共用底座式油箱•ABB断路器(可以选择其他品牌)•发动机原厂合格证、使用手册、保修卡•发电机原厂合格证、使用手册、保修卡•沃尔沃柴油发电机组检测合格证•柴油发电机组操作手册沃尔沃发电机保养建议一般保养注意事项常行发电机组在使用过程中应该保证每日检查保养，主要检查柴油机机油平面、冷却液平面。

每日检查柴油发电机组有无三漏(机油、冷却水、柴油、掺漏)，风扇皮带有无磨损，有否松裂。

无忧车网专业评测沃尔沃XC60

无忧车网对沃尔沃XC60的专业评测一、外观评测沃尔沃XC60的三围尺寸参数分别是：长4628mm，宽1891mm，高1713mm，轴距是2774mm,这样的三围尺寸让XC60的空间得到了很大的保证。

XC60的前脸设计一改往日的低调内敛。

镀铬环绕的六边形散热格栅中间是明显加大的沃尔沃车标，大大提升了视觉冲击力。

则为ACC主动式定速巡航系统的测距雷达。

加大的梯形进气格栅中央卧着的LOGO能够醒目的充满前面车辆的整个后视镜易于识别。

整个前脸可以看到，经典的沃尔沃LOGO不在是以往谨小慎微的谦虚内敛的模样，新的设计显得充满张力，大胆而张扬。

新增的LED日间行车灯虽然没有做的那么处处锋芒，但简约的设计恰恰符合沃尔沃一贯秉承的斯堪地那维亚风格。

大灯为主动双氙气大灯。

既然将其命名而DNALamp，相信在沃尔沃今后的车型上这一设计将得以传承。

车身后视镜设计的宽大而厚实，转向灯在外侧清晰可见，提供更多的安全保障。

银灰色陪黑色的配色显得更有档次感。

我发现，改款后两边的雾灯没有再出现了而是换成了格栅搭配银色镀铬装饰，显然这样的设计有别于传统的设计风格。

XC60还配备了之前已在国产S80L上应用过的盲点信息系统（BliS）。

该系统利用两组装在后视镜下方的摄像头，不断地监测车两侧后方视野盲区内是否有车辆出现。

与普通技术不同的是，该系统采用了红外线影像探测技术，具有极高的灵敏度，当有车辆行驶入监视区内时，车内两侧A柱上的警示灯会立即亮起，及时提醒驾驶者注意，采取规避措施，避免因视觉盲点而引发意外。

XC60上的雷达探头起到很好的安全保护作用，给我们的出行带来更多安全保障，这一点沃尔沃的一直不余遗力坚持遵循的。

隐藏在车尾后备箱拉手处的倒车影像，给乘用时候提供又一个安全保障，方便倒车的同时也负责监控路面环境。

侧面车身，挺拔腰线从前翼子板向后逐渐走高。

以其为界单独看车身的上下两部分。

逐渐向后下切的车顶线条与逐渐攀高的腰线将车身上半部分勾勒出双门轿跑车的运动感。

Volvo新柴油机系列

暂的过渡，Ｃｍｉｓ和他的姐妹公司在集成过程ｏｍｎ将
性能更强的ＥＭ。ＩＬ和ＬＣ提供优化的压缩制ＣＳＳ动。自动油量传感器可以免除日常的油量检查，新的２８６ｋ容量的油底壳可使标准的排油间隔时间２．ｇ
关键点是使用Ｈｌｓ可变几何涡轮增压器和冷ｏｔｅ却ＥＲ系统。２０Ｇ０７年的变动包括电控驱动可变几
２００６年早些时候，ＶｌｏＴｕｋｏｈＡｒａｏｒｃｓＮｒｍｅｃｖｔｉ
展示了将于２００７年上市的一个重型柴油机系列。
Ｃｍｍｎ是唯一的在一个平台下拥有这些技术ｏｉｓ
ＶＭ（Ｎ中等机身）和ＶｌｏＶＬ（机身）卡车ｏＮｖ长上采用。功率范围为２２—３２ｋ，扭矩１９４０Ｗ５— ６１６・６Ｎｍ。主要用于轻便客货两用车、运输车、９零担货运（ＪＩＬ）和近距离运送。其净重为９７ｋ，ｒＩ８ｇ因此对发动机自身重量要求较高的散货船、油轮来
提高到２０英里。０００
Ｖｌｏｖｏ新柴油机系列
领域有一个密切的合作。Ｃｍｍｎ公司大功率产品的旗舰是ＩＸ和ＩＭｏｉｓＳＳ发动机。ＩＸ为直立、１ＬＳ５、６缸发动机，功率为２７— ２Ｗ，扭矩为１６８４１ｋ６—２５８Ｎ・９０ｍ；ＩＭ为Ｓ直立、１Ｌ１、６缸发动机，功率为２９到３６ｋ，００Ｗ扭矩为１５９—２３７４Ｎ・５７．ｍ。两者的排放总和指标接近，和它们从２００２年起开始使用时的相同。ｌｘ和ｌＭ发动机将在２０ｓｓ０６年第四季度有限生产。

volvo 740参数

volvo 740参数Volvo 740是一款豪华轿车，以其卓越的性能和卓越的品质而备受关注。

以下是一份详细的参数说明，帮助您了解这款车型的各个方面。

一、车身尺寸Volvo 740的车身尺寸为长**5070毫米**、宽**1873毫米**、高**1445毫米**。

这款车型提供了宽敞的车内空间，适合多人口家庭使用。

二、发动机参数Volvo 740搭载了一台直列六缸发动机，型号为B6发动机，最大功率为**210马力**，最大扭矩为**320牛·米**。

这款发动机具有出色的燃油经济性和低排放性能，同时提供了充足的动力储备，适合在城市和高速公路上行驶。

三、变速箱与驱动方式Volvo 740采用了一款六速自动变速箱，提供了顺畅的换挡体验。

驱动方式为前置前驱，适合在城市和高速公路上行驶。

此外，这款车型还配备了四驱系统，可以在复杂的路况下提供更好的牵引力和稳定性。

四、悬挂系统Volvo 740采用了前麦弗逊式独立悬挂和后多连杆式独立悬挂，提供了出色的操控性和舒适性。

这款车型还配备了自适应悬挂系统，可以根据路况和驾驶模式自动调整悬挂的硬度，以满足不同的驾驶需求。

五、安全性配置Volvo 740配备了多项安全配置，包括盲点监测、主动刹车、自动紧急制动、车道偏离预警等。

这些配置可以大大提高驾驶安全性，减少交通事故的发生。

六、其他配置Volvo 740提供了丰富的舒适性和便利性配置，包括电动座椅、座椅加热/通风、自动空调、导航系统等。

此外，这款车型还配备了智能互联功能，可以通过手机应用程序远程控制车辆。

七、油耗表现在城市和高速公路行驶条件下，Volvo 740的油耗表现较为理想，百公里综合油耗在**8升左右**。

这得益于其高效的燃油经济性和优化的动力分配系统。

综上所述，Volvo 740是一款性能和品质卓越的豪华轿车，具有宽敞的车内空间、出色的操控性和舒适性、丰富的安全配置和便利性配置以及良好的油耗表现。

如果您正在寻找一款豪华轿车，Volvo 740是一个值得考虑的选择。

沃尔沃柴油机技术参数 Volvo Penta TAD1353ve Technical data

ImportantGeneralliters in 3mm in mm inkg lb kg lb rpm 1200150018001900kW 299345345345hp 407469469469with fankW 290330326325890mmhp 394449443441Nm 2380219618301734lbf ft 1755162013501279Nm lbf ft %m/s 6,37,99,510,0ft/sec 20,725,931,132,8MPa 2,342,161,801,71psi 339313261247MPa 15,215,715,715,1psi 2204227722772190kgm²(not including flywheel)lbft²kW 23334752hp31456471Compression ratio 17,1:1Bore 1315,16Stroke1586,22This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the Volvo Penta application for certification.Requirements marked with are considered as critical for exhaust emissions compliance according to the design specification in the Volvo Penta application for certification.Failing to follow and meet these instructions and requirements when installing a certified engine in a piece of nonroad equipment for use in the United States violates U.S. federal law (40 CFR 1068.105(b)), subject to fines or other penalities as described in the Clean Air Act.In-line four stroke diesel engine with direct injection. Rotation direction, counterclockwise viewed towards flywheel Number of cylinders 6Displacement, total 12,78780Firing order 1-5-3-6-2-43946Performance IFN Power345 kW without fan Wet weightEngine only (Estimated)(excl after treatment comp.)13252921Power pac179023801755Torque at:IFN PowerMax torque at engine speedrpm1200 rpmMax combustion pressure at:IFN PowerTotal mass moment of inertia, J (mR 2)1,14327,1Power tolerance ±2Mean piston speed Effective mean pressure at:IFN Power Friction PowerDerating see Technical Diagramsrpm 1200150019002200kW N/AN/AN/AN/Ahp Nm lbf ft rpm rpm °C°C °F °C °F °C °F liter/h liter US gal Max liter US gal Minliter US gal h h °°°kPa psimax °C °F 99%µ50%µEngine speed range for VCB activation:N/A Min engine speed with VCB still active:N/A Min oil temperature for VCB activation:N/AEngine brake performance (only engines with VCB)Brake power:without fan Brake torque:without fan-13with manifold heater 3 kW and block heater-30-22*Specify oil and fuel qualityT>-15°C Oil VDS3 or VDS4 15W/40 T<-15°C Oil VDS3 or VDS4 5W/40 Cold start performance *Cold start limit temperaturewithout starting aid -155with manifold heater 3 kW-2530°F*See also general section in the sales guide Lubrication system0,02Heater type MakePower kWEngaged hours (-30°C)Cooling water temp engine blockSelf circulatingVolvo 21578298212-1°C Lubricating oil consumption (average)Oil system capacity including filters 369,51Oil pan capacity:(both variants)307,93195,02Engine angularity limits:front up 11front down 11side tilt11Oil change intervals/specifications VDS3500VDS4500Lubrication systemLubrication oil temperature in sump:13026638Oil pressure at rated speed300- 65044- 94Oil filter filtration efficiency(in accordance with ISO 4548-12)14liter/h US gal/h kPa psi Fuel supply line max. pressure, during engine stand stillkPa (meassured at fuel inlet connection)psiFuel supply line min. pressure, during engine stand stillkPa (meassured at fuel inlet connection)psi liter/h US gal/h kPa psi °C °F µ96%µ75%µrpm 1200150018001900m³/min 19,023,02526cfm 671812883918kPapsi kW 229268269280BTU/min 13023152411529815923°C 544539493497°F10111002919927kPa 9121415125mmpsi 1,31,72,02,2m³/min 52,060,06263cfm183621192190222516523,9-125-18,1Fuel systemFuel return line max. restriction(measured at fuel return connection)202,9Max. allowable inlet fuel temp(Measured at fuel inlet connection)60140System return flow at max. Speed 30,07,9System supply flow at max. Speed 13034,3Fuel supply line max. restriction (measured at fuel inlet connection)304,4Intake and exhaust system Prefilter / Water separator micron size 10Governor type/make, standard Volvo/EMS2.3Fuel filter filtration efficiency 46Charge air consumption at:(+25°C and 100kPa)IFN PowerFuel to conform toFuel corresponding to EN590:1999 or ASTM D975-No or JIS KK2204:2004Exhaust gas temperature after turbine at:IFN PowerSee front page for important informationMax allowable back pressure in exhaust line (after turbine)50,7Heat rejection to exhaust at:IFN Power See front page for important informationMax allowable air intake restriction including piping Pipe dimension Ø:Exhaust gas flow at:(temp and pressure after turbine at the corresponding power setting)IFN Powerrpm 1200150018001900kW 11,011,09,610,3BTU/min 626626546586kW 157177182214BTU/min 8928100661035012170m²foot²mm in kW 9,515,019,520,5hp 13202728liter US gal liter US galCoolant pumpdrive/ratio l/s 3,74,75,76US gal/s 1,01,21,51,6l/s 3,24,25,55,5US gal/s 0,81,11,51,5kPapsi °C °F °C °F kPapsikPapsikPapsi°C°F literUS galCoolantYellow Volvo Coolant Solution (VCS)Radiator cooling system type Closed circuitCooling systemHeat rejection radiation from engine at:IFN Power Heat rejection to coolant at:IFN PowerFan diameter890 mm89035,04Standard radiator core area 0,88,61Fan drive ratio fan Ø8900,99:1 ccwFan power consumption 890 mm 6,3belt/1,41:1 cwCoolant flow with standard system Coolant capacity:engine205,3std. 0,8m² radiator with hoses24180fully open92198Maximum static pressure head(expansion tank height + pressure cap setting)10014,5Minimum coolant flowMaximum outer circuit restriction incl. piping 65,09,4Thermostat:start to open 82Maximum top tank temperature 107225Recommended Draw down capacity.The difference between min coolant level in the expansion tank and the lowest level where the engine's coolant system still are functioning20,5Minimum static pressure head(expansion tank height + pressure cap setting)7010,2Standard pressure cap setting 7510,9rpm 1200150018001900kW51606565BTU/min 2900341236963696kg/s 0,370,440,500,51°C 176180178177°F349356352351°C 42464950°F 108115120122kPa psi kPa 211223217214psi 30,6032,3431,4731,04m²foot²0.8pull 890fanrpm kW hp °C °F m 3/s ft 3/s Pa psi 190034555,61329,3328,40,99469Charge air mass flowIFN Power Charge air inlet temp.(Charge air temp after turbo compressor)IFN PowerCharge air cooler systemHeat rejection to charge air cooler IFN Power See front page for important informationMaximum pressure drop over charge air cooler incl. piping 121,74Charge air pressure (After charge air cooler)See front page for important information Max allowable Charge air outlet temp.(Charge air temp after charge air cooler)Engine speed Enginepower Air on temp Air flowExternal restrictionStandard charge air cooler core area0,88,61Cooling performance:m² radiator and Cooling air flow and maximum additional external restriction at different radiator air temperatures based on 107°C TTT and 40% coolant. Valid at 1 atm.Isochronous 0Adjustable PI-constants600-900Energized to run/StopOn/Off On/Off°C 125Oil pressurekPa 25,0kPa 275°C 105OnkPa 5°C80kPa Warning map value +20kPa *Off means no shut down, alarm onlyWarning AlarmDerated 0%to engine protection mapDerated 100% toengineprotection map105°C 107°C 107°C 108°C 125°C 127°C 127°C 130°C Warning map value Alarm map valueN/AN/A 80°C 85°C 85°C 86°CWarning map value Alarm map value Alarm map value Alarm map valueForced idle aftersecForced shut down after 2 sec N/A Governor droop Governor response 1Idle speed 700Engine management system Functionality Alternatives Default settingGovernor mode Engine sensors and switch settings Alarm levelEngine protection Stop functionPreheating function Lamp testRated speed300Shut down, ON/OFF*Oil levelOil temp Setting +5Shut down, ON/OFF*Low idle50Shut down, ON/OFF*Parameter Unit Setting range Default setting LevelAction.Default/Alternative Coolant temp 107Shut down, ON/OFF*Coolant level See cooling systemPiston cooling pressure >1000 rpm kPa Water in fuelAlarm When ClosedCrank case pressure Rapid Pres incShut down, ON/OFF*Fuel feed pressure 1200rpm kPa100Air filter pressure drop Altitude, above seamAutomatic derating, see section deratingEngine speed rpmx % of rated speed 114% ofrated speedAlarm levelShut down, ON/OFF*Charge air temp 85Shut down, ON/OFF*Charge air pressure Alarm map value +30kPaShut down, ON/OFF*High charge air tempN/A N/A High charge air pressureN/A N/AOil tempN/A N/ACoolant temp N/A Low oil pressureN/AAlarm map valueParameterAHz/alternator rev.type kW hpflywheelstarter motorkW ATemperature °C 25-15BatteryAh / CCA235 / 1300145 / 1050145 / 1050rpm 17111898A 290400480kW 6,27,57,7kW 6,58,18,5Ah / CCArpm 1200150018001900Nm 2300214015601620(with a total added mass moment of inertia, J (mR2)≤ 0,05 kgm²)lbf ft 1696157811511195max left kW 42536268hp 57728492max down kW 36445260hp 49607182max rightkW 42536268hp 57728492Nm lbf ft Nm lbf ft Nm lbf ft Nm lbf ft N lbf*Maximum allowed torque at individual PTO´s.If more then one PTO output is used simultaniusly, calculations needs to be performed to determine available maximum. Available torque depends on application inertia.Starter motor:output 79,5153tacho output 6drive ratio5,25105P70 / (105P70 ISS för start/stop)Alternator:output110/150Electrical system Voltage and type 24V Number of teeth on:12Starter input power during crank Battery power during crank Inlet manifold heater (at 20 V)3Power relay for the manifold heater 1Power take offFront end in line with crank shaft max:*Maximum torque on timing gear at rear PTO : *1000Crank speedCrank current738Conditions:(4 mΩ main circuit resistance@Min battery @ 0°C140/800Speed ratio direction of rotation viewed from flywheel side 1,31:1/ccwTiming gear at compressor PTO max:*600Front end belt pulley load. Direction of load viewed from flywheel side:Timing gear at servo pump PTO max:*10074Speed ratio direction of rotation viewed from flywheel side 1,58:1/ccw Max. rear main bearing load4000899,2443Speed ratio direction of rotation viewed from flywheel side 1,31:1/ccw Max allowed bending moment in flywheel housing 1500011063PerformancePower (kW)Rpm IFN Power3451900Signal Range Derating level0,5-4,5 V 50 - 400 kPa map50-0 kΩ-40° - 130 °C85°CDigital 50-0 kΩ-40° - 140 °C 107°C 0,5-4,5 V 0 -15 kPaRapid presincFrequency FrequencyN/A N/A 50-0 kW -40° - 140 °C127°C DigitalN/ASignal Range0,5-4,5 V 50 - 400 kPa60010001200150019003403403403503353503503503603450,5-4,5 V 0-700 kPa05001000150019001502003003001251752752750,5-4,5 V 0-700 kPa6001000120018001900100100100300300N/AN/AN/AN/AN/ARemarksDeratingBoost pressure N/A map value+30 kPaSensors Alarm Alarm switchAlarm LevelCondition/Delay Soft derate VE/Shutdown Powerpack Coolant level switch Alarm when closedLow Boost temperaure N/A80°C Soft derate VE/Shutdown Powerpack Soft derate VE/Shutdown Powerpack Crankcase pressure N/A Rapid pres inc ShutdownCoolant temperature N/A105°C N/A Engine Speed Crank N/A Lost sign N/AEngine Speed Cam N/A Lost sign Soft derate VE/Shutdown Powerpack Oil level sensor Alarm when low levelN/A N/AExhaust gas temp N/AN/A Soft derate VE/Shutdown Powerpack Water In fuel switchAlarm when closedWater in FuelN/AOil temperature N/A 125°C Charge Air pressure Sensors Alarmrpm Map ConditionDeratingSoft derate VE/Shutdown PowerpackShut downFuel pressure Oil pressure Warning Level Warning Level Alarm Level Alarm Level Warning Level Alarm Level 8/199/19。

280KW沃尔沃柴油发电机组技术规格参数发电机组技术参数

Ø工业用9dB消音器及连接用标准件 Ø随机资料：柴油机及发电机原厂技术文件、发电机组说明书、测试报告等。自选配件（费用另计）： Ø机油、柴油、水套、防冷凝加热器 Ø电瓶浮充电器 Ø自保护、自启动机组控制屏 Ø带“三遥”功能机组控制屏 ØATS自动负载转换屏保修期：（国内）机组调试验收合格后的12个月或累计运行1000小时；以先到期为准。由于产品质量问题实行免费维修或换件，终身有偿服务！（易损件、常用件、人为损坏、疏忽保养等均不在保修范围内）如因原厂调整则以原厂保固条例执行！执行标准：质量管理体系ISO9001 行业执行标准GB/T2820.1997 配送方式：上门自提、专车送货、汽车配载等 Ø分体式日用燃油箱、一体式底座燃油箱 Ø防雨型机组（箱柜） Ø静音型机组（箱柜） Ø移动拖车型电站（箱柜拖车） Ø静音型移动电站（箱柜拖车）
280KW沃尔沃柴油发电机组技术规格参数发电机组技术参数：机组型号：JHV-280GF）额定输出电压：400V/230V 额定电流：504A 额定频率/转速：50Hz/1500rpm 启动控制方式：电启动满载燃油耗量：202g/kw/h 燃油牌号：（标准）0#轻柴油（常温）润滑油牌号：（标准） SAE15W／40 外形尺寸（mm）： 3000*1150*1600 柴油机技术参数：品牌：沃尔沃型号：TAD1341GE 功率：310KW 气缸数：6/直列型排气量：12.78L 启动方式：DC24V电启动发电机技术参数：品牌：上海恒声（标配）型号：HSJ 314E 额定功率：280KW 额定电压：400V/230V 绝缘等级：H级发电机组标准配置如下： Ø直喷式内燃发动机（柴油）； Ø交流同步发电机（单轴承）； Ø适合环境40℃－50℃散热器水箱、皮带驱动冷却风扇、风扇安全护罩； Ø发电输出空气开关、标配控制屏； Ø机组钢制共用底座（含：机组减振橡胶垫）； Ø干式空气过滤器，燃油过滤器，润滑油过滤器、启动马达、并配有自充电发电机； Ø启动蓄电池及蓄电池启动连接电缆；防护等级：IP22 接线方式：三相四线、Y型接法调节方式：AVR（自动电压调节器）输出频率：50Hz 励磁方式：无刷自励磁冷却方式：封闭式水循环冷却类型：四冲程，废气涡轮增压，直接喷射压燃式润滑油容量：35L 调速方式：电喷缸径*行程：131mm*158mm 转速：1500rpm 稳态电压调整率： ≤±0.5% 瞬态电压调整率： ≤±15% 电压波动率：≤±0.5% 电压波形失真度： ≤5% 电压稳定时间： ≤1.5sec 稳态频率调整率： ≤±2% 瞬态频率调整率： ≤±5% 频率稳定时间：≤ 3sec 频率波动率（%）：≤±0.5% 噪声（LP1m）：100dB（A）重量：2450KG