GA90-160, 2013.6零件手册

合集下载

阿特拉斯GA132-160vsd产品样本

GA 90+-160+ / GA 132-160 VSD90-160 kW / 125-200 hpAtlas CopcoOil-injected Rotary Screw CompressorsWe are committed to your superior productivity through interaction and innovation.Total capability,total responsibilityRight at the heart of your business, Atlas Copco delivers quality compressed air for superior operational capacity. From compressed air generation to point of use, you can choose from our wide range of products to create a complete compressed air system tailored to your specific needs. All Atlas Copco products are engineered to integrate seamlessly, ensuring the highest level of reliability and energy efficiency. As a result, Atlas Copco can take full responsibility for your compressed air infrastructure with a guarantee of best-in-class quality. With a global presence in over 150 countries, we can provide an unrivalled service to maintain and continually improve your compressed air system performance.Backed by 100 years at the forefront of compressed air, Atlas Copco products offer the finest quality and efficiency. Our goal is to be First in Mind—First in Choice ®. That is why Atlas Copco’s pursuit of innovation never ceases, driven by the dedication to meet and exceed your demands. Always working with you, we are committed to providing the customized air solution that is the driving force behind your business.First in Mind—First in Choice 中国空压机在线论坛ｈｔｔｐ：／／ｂｂｓ．ａｉｒ－ｃｏｍｐ．ｃｎ／Powerful efficiencyDRIVING DOWN ENERGY COSTSThe cost of compressed air can represent over 40% of your total electrical costs. The GA compressor range achieves a new standard in energy efficiency, helping you spend less. With the addition of VSD (Variable Speed Drive) you can reduce costs by an additional average of 35%. By tuning compressor capacity to fluctuating air demand we can also reduce overall compressor lifecycle costs (LCC) by an average of 22%. The impact on the environment is considerable, reflecting Atlas Copco’s commitment to a safe, healthy world for future generations.BUILT TO LASTEvery GA is designed, manufactured and tested to comply with ISO 9001, ISO 14001 and ISO 1217 stipulations. It uses the latest generation of Atlas Copco’s patented oil-injected screw element, ensuring a long and trouble-free life at the lowest possible operating cost. Engineered for reliable service, even in ambient temperatures up to 55°C/131°F and very harsh environmental circumstances, the GA takes reliability to a new level.PROTECTING YOUR PRODUCTIONClean dry air expands the lifetime of your equipment and protects your investment. The new built-in refrigerant dryer ensures a lower dew point, which is reflected in higher efficiency.FOLLOW-UPTailored service contracts and state-of-the-art add-ons make sure you get the right maintenance, immediate response and genuine spare parts – anywhere in the world.TAILORINGAt Atlas Copco we offer the industry’s broadest portfolio of offerings to help you achieve the most efficient compressed air system for your needs, and optimize your production process at the same time.CHOICEAtlas Copco masters every principle of your air system and offers the most energy-efficient solution for each application.EASY INSTALLATION AND MAINTENANCEGA compressors are delivered ready to use and designed for trouble-free maintenance. The oil and air filters are easily accessible and cooler cleaning procedures are simple. The GA Full Feature (FF) compressor range with its integrated air treatment equipment reduces your installation costs even further, and leaves you the space you need for your application to run.TOTAL CONTROLFrom the Elektronikon ® compressor controller to the ES compressor room controller, Atlas Copco uses the most advanced algorithms designed to reduce your energy costs and ensure your peace of mind by keeping reliability at the maximum level.Efficient, reliable and built to last, the GA 90+-160+ / GA 132-160 VSD compressors are designed to provide high quality compressed air even under harsh conditions. Thanks to Atlas Copco’s Beyond a superior screw elementDRIVING DOWN ENERGY COSTS• The GA Series’ superior screw elements are designed to give the optimum combination of maximum free air delivery for low energy consumption.• The state-of-the-art compressor element is powered by Efficiency 1 class / NEMA EPAct electric motors, contributing to maximum compressor package efficiency.• GA VSD (Variable Speed Drive) compressors automatically adjust the compressed air supply to the demand. Thus the considerable waste of energy caused by no load operation and oil vessel blow-off losses can be avoided.• The VSD-driven radial cooling fans deliver optimum cooling flow and reduced energy consumption in any conditions, through precise fan speed regulation.• The optional Energy Recovery system can recover up to 94% of the compressor shaft power as hot water.• GA 90+-160+ / GA 132-160 VSD compressors feature no-loss drains, which eliminate the waste of compressed air that conventional drains create.• The integrated compressed air treatment includes a refrigerant dryer with the built-in Atlas Copco Patented Saver Cycle Control mode that reduces energy consumption in light load conditions.PROTECTING YOUR PRODUCTION• The aftercooler with integrated water separator immediately removes 100% of the condensate, delivering a higher quality of air than conventional external separators with typically low efficiencies (40-90%). This protects the downstream equipment from corrosion and water damage.• Thanks to Elektronikon-controlled drains, there is no risk of condensate building up and no risk of water suspended in the compressed air.• The GA’s integrated compressed air treatment (refrigerant dryer and compressed air filter) increases the quality of your end product by removing moisture, aerosols and dirt particles.BUILT TO LAST• The GA series’ superior screw element’s patented asymmetric rotor profile and meticulous bearing selection ensure low wear and tear and increased reliability.• All compressors feature TEFC IP55 motors designed for continuous operation under severe ambient temperature conditions up to 55°C / 131°F*.• The heavy duty air inlet filter works with a 2-step dust separation system, which protects the compressor components from wear, even in the dustiest environments.• The GA VSD (Variable Speed Drive) motors have been designed specifically to operate ideally during flexible air demands. The special motor design includes protection against bearing currents and optimizes motor cooling at lower speeds.• The GA VSD frequency converters feature epoxy coated electronic cards, and a heavy duty cooling air filtration is available as an option for operation under the dustiest environments.* Standard up to 46°C / 115°F. (Optional up to 55°C / 131°F)long-standing experience and pioneering innovations there’s a GA compressor available to cut costs and enable smooth, continuous operation right across your production processes.LOW MAINTENANCE COSTS• The heavy duty air inlet filter features a pre-separation cyclone which reduces the dust load in the fine filter doubling the filter element lifetime without reducing filter efficiency.• The high efficiency air/oil separation system consists of a 2-step separation system providing low residual oil content in the compressed air. Low oil consumption ensures low maintenance costs and longer up time.• The VSD radial cooling fans are maintenance-free with bearings greased for life.• Condensate is constantly removed from the water drains.A large diameter drain port removes the potential for clogging, providing trouble-free operation and minimal maintenance.• Replacement of the heavy duty oil filter is simple and quick.• For extended service intervals 8,000-hour oil filters are included as standard.• A mobile phone messaging option facilitates easy planning of routine maintenance activities. Efficient maintenance practices reduce the maintenance costs and ensure optimal compressor performance.ENVIRONMENTALL Y RESPONSIBLE• The VSD radial cooling fans and strong sound insulation reduce noise emissions to less than 71 db (A).• The Variable Speed Drive automation and instrumentation comply with 89/336/EEC directives and operate without any risk of electromagnetic interference.• VSD reduces electricity consumption by an average of 35%, enabling companies to become more independent of electricity supplies and reducing harmful CO2emissions.• The Energy Recovery system recycles energy back into hot water and air which can be used elsewhere in the production environment.LOWERED INSTALLATION COSTS• Totally assembled compressor package. No need to assemble loose shipped components. Simply connect a power supply, compressed air piping, and cooling water piping (for the water cooled version) and the compressor is ready to work.• The Full Feature concept comprises the total compressed air system compressor and air treatment equipment. It is all integrated inside the compressor canopy, limiting both installation costs and space requirements.A state-of-the-art integrated solution• The unique and patented Saver Cycle Control stops the dryer when the compressor is stopped or in unload mode, drastically reducing the power consumption. T he dew point is continuously monitored and the dryer is started again when the dew point starts to increase.• By adjusting the speed of the refrigerant compressor, the integrated VSD dryer control* provides maximum energy saving in low load conditions.• The dryers can perform at ambient conditions of up to 46°C / 115°F . High ambient temperature version available for temperatures up to 50ºC as an option.• Compressor and dryer are designed to work optimally together to perform smoothly under the most critical conditions.* GA VSD Full Feature onlyFEATURES OF THE ExTREME DUTY INTEGRATED REFRIGERANT DRYERINCREASE YOUR PRODUCTION RELIABILITYLow quality air heightens the risk of corrosion in your system, which can lower the life span of your air tools and production equipment. The GA’s filtration process produces clean air that enhances your system’s reliability, avoiding costly downtime and production delays.PROTECT THE ENVIRONMENTWith leaks and energy waste minimized and the unsafe disposal of untreated condensate eliminated, you can safeguard the environment and comply with stringent international regulations.INTEGRATED PURITYThe filters and integrated refrigerant-type air dryer (IFD) efficiently remove moisture, aerosols and dirt particles to protect your investment. This quality air expands the life of equipment, increasing efficiency and ensuring quality in your final product.SAFEGUARD YOUR PRODUCT QUALITYCompressed air coming into contact with your final products should not affect their quality. T he GA provides the clean, dry air that will protect your product’s reputation in the marketplace.DRIVING DOWN ENERGY COSTSClean, treated air reduces the risk of corrosion and leaks in your compressed air system. A 3 mm leak could easily add up to €1800 to your energy bill annually.Protecting your productionUntreated compressed air contains moisture, aerosols and dirt particles that can damage your air system and contaminate your end product. Resulting maintenance costs can far exceed air treatment costs. We believe in effective prevention.14 BAR 7 BARTotal control, assured efficiencyThe Elektronikon ® operating system provides monitoring to increase your compressor’s efficiency Easily expandable with extra sensors, digital inputs and internet communication functions, the Elektronikon can to your specific needs – offering simple, central and control of up to four compressors. For optimal ease of use, FULL Y OPTIMIZED SYSTEMThe ES Multiple compressors• Eliminating the inefficient transition period from full to no load power.• Avoiding excessive off load power consumption.• Maintaining the net pressure band within 0.10 bar, 1.5 psi.• Reducing overall average working pressure.• Minimizing system leakage due to a lower system pressure.• Increasing flexibility with soft starting gradual motor ramp-up to avoid electricity surges.• Offering flexible pressure selection from 3,5 to 14 bar with electronic gearing to ensure lowered electricity costs.With VSD (Variable Speed Drive) technology, air supply mirrors air usage – automatically adjusting the motor speed depending on demand. Lowered system pressure minimizes energyuse across all production processes to reduce energy costs. With VSD technology, Atlas Copco has made major energy savings a reality.VSD: Adapt to the flow, control your costsUsing innovative analysis technology, Atlas Copco engineers can map the fluctuations in demand in your current compressed air system and simulate the energy savings a VSD compressorcould bring to your production process. Ask your Atlas Copco representative for more information.THE GA VSD REDUCES ENERGY COSTS BY:JUST HOW MUCH CAN YOU SAVE?Driving down energy costsBecause there is no unnecessary power generated, the GA reduce energy costs by more. Lifecycle costs (LCC) of the compressor can be reduced by an average of 22%. In general, extra cost of a VSD compressor compared to a fixed speed one can be earned back after just one to two Traditional compressors with a full load, no control operate between set pressure points. maximum pressure is the compressor goes off During periods of medium to low air demand, the no load thE high PricE of fLUctUating DEmanDAir DemAnDenerGY CoSTStandard costsair Demand TimeVSD costsAir DemAnDTimeenerGY CoSTair Demand VSD: VariabLE VoLUmE, controLLED coStSLcc of a StanDarD comPrESSorinstallationmaintenance investment Energy consumption VSD comPrESSorinstallationmaintenance investment Energy consumption average 35% Energy Savings1234The Elektronikon ® system controls both the compressor and theintegrated converter; thus ensuring maximum machine safety as well as easy networking of the compressor.All Atlas Copco VSD compressors are EMC tested and certified.External sources do not influence the compressor operation, nor does the compressor affect the operation of other instruments via emissions or via the power supply line.Mechanical enhancements ensure that all the components operatebelow critical vibration levels within the complete compressor speed range.The frequency converter, low consumption, cooling fan ensuresstable operation even in high ambient temperatures up to 50°C / 122°F*INTEGRA TED VSD – THE SMART CHOICE• The machine is tested for the complete speed range to eliminate any ‘speed windows’ that could jeopardize the energy savings and the stable net pressure. (Turndown capability of the compressor is maximized to 80-85%.)• Special attention is given to the electric motor, which is specifically designed for VSD operation (inverter duty motor). Bearings are protected against induced bearing currents and both motor and converter are perfectly tuned to obtain the highest possible efficiency over the entire speed range.*Standard up to 46°C/114.8°F , optional high ambient version up to 50°C/122°F .SecondsmaximumFlowoperating rangemotor speedCombined motor/converter efficiency100 %1234WHAT ENERGY?Air compression creates heat that is normally wasted in the coolers. Atlas Copco-designed energy recovery systems enable the recovery of most of this heat. Recovery of energy from the shaft input of the compressor can be up to 94% of the compressor shaft power.WHY RECOVER ENERGY?Energy costs can constitute 80% of the total costs of compressed air production. With rising energy prices, saving energy also means a substantial cost saving .With global warming, Kyoto directives and the gradual depletion of traditional energy sources, every business has a duty to contribute as much as possible to overall energy conservation .HOW IS THE ENERGY RECOVERED?Energy recovery systems are integrated modules that recover heat which is otherwise wasted. The heat in the form of hot water (85-90 °C) is directly usable as a source of energy. The main module of the recovery system is built into the compressor.Shaft power100 %Radiant losses2 %Remaining heat in compressed airJul 04 Oct 04 Jan 05 Apr 05 Jul 05 Oct 05 Jan 06 Apr 06 Jul 06Date0.750.70.650.60.550.50.450.40.350.3P r i c e /l i t e r (€)evolution of the fuel oil prices (example from a european country)Maximize your savings…process water boilerHOW CAN THE RECOVERED ENERGY BE USED?The hot water generated can be put to several uses in the industry:• as preheated boiler feed water for industrial processes • for space heating by circulation in radiators or for showers • for other industrial applications like dyeing textiles, operation of absorption chillers, etc.The hot water produced should be used as an auxiliary source of energy, as the load of the compressor and thus the amount of heat produced may vary.HOW DO I BENEFIT?You save energy wherever energy as an auxiliary source to reduce your operating costs.The investment needed to link the hot oil circuit from the compressor to the existing water circuit is relatively modest and the time needed from your investment is generally very short.ASSUMPTIONS• example chosen is a 160 kW GA compressor• 8,000 running hours/year at full load and full energy recovery• cost of fuel oil: €0.55/l• figures shown are an example. Price calculations can Investment in energy recovery system is recovered in less than 2 months Compressor is paid back in less than 2 years Net gain of €570,000 in 10 years**Calculation only includes energy costs as maintenance will remain approximately the same as for a standard compressor.1570,00090,00060,00030,000S a v i n g s (€)Lifecycle costcentral heatingshowers…recover energyAt Atlas Copco, our responsibility doesn’t stop when the product is delivered. An extensive portfolio of exclusive Aftermarket products and services is designed to add maximum value for our customers – no hidden costs, no surprises and minimized risk to your processes. Guaranteed serviceability within 24 hours ensures optimum availability and reliability of your compressed air systems with the lowest possible operating costs. We deliver this complete service guarantee through our extensive Aftermarket organization, maintaining our position as the leader in compressed air.Peace of mindACTIVITY PRODUCT*Genuine parts Atlas Copco Service kits & oils Extended warranties AIRXtendService contracts ServicePlanSystem audits AIR Scan™Remote monitoring AIR Connect™Energy saving AIR Optimizer™Product improvements Upgrade programs* more information is available from your local atlas copco customer center.Complete scope suiting all needsIncluded as StandardHeavy duty Air inlet filter TEFC IP55 Class F electric motorAir intake flexible StartersAir intake valve (not on VSD units)Pre mounted electrical and VSD cubiclesCompressed air aftercooler and oil cooler Flexible vibration dumpersVSD cooling fans for air cooled units Air / oil separatorIntegrated water separator Elektronikon control systemElectronic water drains with no loss of compressed air Full load / no load regulation system (not for VSD)Heavy duty oil filters Silencing canopyComplete air, oil, water circuit Supression of emissions / harmonic distortionsOil containing structural skid with no need for foundations Stainless steel tube and Shell coolers for water cooled unitsAvailable options / Model GA 90+ - 160+GA 110 - 160GA 132 - 160 VSD Full Feature: integrated ID refrigerant dryer x x x Integrated DD pre-filter (only with integrated dryer)x x x Integrated energy recovery system x x x Separate air intake x x x Modulation Control x x N.A.High Ambient Version (up to 55 ºC / 131 ºF * )x x x Phase sequence relay x x standard** PT1000 T hermal protection in the main motor windings and bearings x x standard** Oversized main motor x N.A.N.A.Anti-condensation Heater in the main motor x x N.A.VSD cabinet heavy duty filtration (Applicable for VSDs)N.A.N.A.xNema 4 Cubicle x x N.A.Roto-Xtend Duty fluid 8000h x x xNPT connections x x x Anchor Pads x x x Performance test certificate x x x Witnessed performance test x x x Material Certificates x x x Seaworthy packaging x x xRain Protection Kit x x N.A.IT / NT network system x x xSPM vibration monitoring system x x xGSM alarm messaging system x x x Automatic water shut-off valve for water cooler units x x x Thermostatic water regulating valve N.A.N.A.x* GA Full feature 50 ºC / 122 ºF; GA VSD 50 ºC / 122 ºF; GA fix speed Pack 55 ºC / 131 ºF** Functionalities integrated in the frequency converter protectionsDimensionsCompressor typeAircooled Pack Aircooled Full Feature Watercooled Pack & Full Feature L W H L W H L W H mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inchGA 90+-160+260010220007920007932001262000792000792600102163064200079 GA 110-160260010220007920007932001262000792000792600102163264200079 GA 132-160 VSD320012620007920007938001502002792347923200126163064234792(1) Unit Performace Measured according to ISO 1217, Ed. 3, Annex C - 1996 faD is measured at the following working pressures- 5.5 bar variants at 5 bar- 7.5 bar variants at 7 bar(4) maximum working pressure for GA VSD - 8.5; 10;14 bar (e) / GA VSD FF - 8.3; 9.8 ; 13.8 bar(1) Unit Performace Measured according to ISO 1217, Ed. 3, Annex C - 1996 faD is measured at the following working pressures- 75 psi variants at 73 psi- 100 psi variants at 100 psi(4) maximum working pressure for GA VSD - 8.5; 10;14 bar (e) / GA VSD FF - 8.3; 9.8; 13.8 barIn order to be First in Mind—First in Choice ® for all your compressed air needs, Atlas Copco delivers the products and services that help increase your business’ efficiency and profitability.Atlas Copco’s pursuit of innovation never ceases, driven by your need for reliability and efficiency. Always working with you, we are committed to providing you the customized quality air solution that is the driving force behind your business.2935 0548 10 – P r i n t e d i n B e l g i u m – S u b j e c t t o a l t e r a t i o n w i t h o u t p r i o r n o t i c e .Never use compressed air as breathing air without prior purification in accordance with local legislation and standards.。

canon 维修技术手册

CANON BJC-6500
1、最大幅面： 2、分辩率： 3、所用墨水盒：
4、打印速度： 5、操作系统： 6、打印缓存： 7、接口：
A3
1440*720
BC-30 450 页/墨盒、160 个喷嘴 BC-31 （BCI-3C/3M/3Y）分别为（54/81/104）页每个墨水盒、 BC-32photo 跟 BC-31 一样，（每种颜色 48 个喷嘴）双墨盒系统：（BC-30+BC-31,BC-31+BC-32PHOTO） 9 张/分（黑墨盒）、6 张/分（彩墨盒） WIN95/98/2000、NT4.0、Mac OS8.1
10、喷嘴检测：通电后，按 RESUME 键听到鸣叫 2 声后松手。
11、清洗操作：通电后，按 RESUME 键听到鸣叫 1 声后松手。
12、故障：开机无动作，指示灯橙、绿色交叉闪烁六次，蜂鸣 6 声。原因：彩色打印头与黑色打印头相互放错位置
CANON S4500
1、最大幅面： 2、分辩率： 3、所用墨水盒：
9、EEPROM 重置： A、按 RESUME 键的同时按下 POWER 不放手。 B、释放 RESUME 键，再按两下 RESUME 键。 C、释放 POWER 键，进入维修模式。 D、按 RESUME 键选取不同的状态（1 次为 EEPROM 测试打印页、 2 次为 EEPROM ALL CLEAR、3 次 WASTE INK CLEAR） E、按 POWER 键确认。
（用户不可排除故障） ROM 错 RAM 错
黄灯闪 1 次黄灯闪 2 次
感谢上海普广数码科技有限公司提供技术支持
响 10 声响 10 声
第 5 页共 60 页
中国打印门户网

高斯特罗部件-电子组件及热元件说明书

[EN][DE][ES][FR][IT][PL][RU]***************************3Find the complete and up-to-date range of products on https://1e l e c t r i c c o m p o n e n t sPart No.418639Ref. No.RATIONAL heATINg eLemeNTs1Part No.420519Ref. No.Part No.417678Ref. No.Part No.4177091Ref. No.1Part No.417694Ref. No. Part No.417714Ref. No.heating elements RatiOnal4Find the complete and up-to-date range of products on https://5Find the complete and up-to-date range of products on https://1e l e c t r i c c o m p o n e n t sPart No.4177101Ref. No.1Part No.417711Ref. No.Part No.417646Ref. No.heating elements for convectionPart No.693548Ref. No.flange suitable for convection heating element W 23mm mountingPart No.693546Ref. No.description flange suitable for convection heating element W 47mm mounting pos. outer length 210RATIONAL heATINg eLemeNTs1Part No.417670Ref. No.heating element 15000W 230V heating circuits 6 ID ø 505mm ED øPart No.417675Ref. No.Part No.418381Ref. No.Part No.417676Ref. No.heating element 18000W 230V heating circuits 3 ID ø 410mm ED øPart No.417671Ref. No.Part No.417677Ref. No.heating element 18000W 230V heating circuits 6 ID ø 407mm ED øheating elements RatiOnal6Find the complete and up-to-date range of products on https://7Find the complete and up-to-date range of products on https://1e l e c t r i c c o m p o n e n t s Part No.418380Ref. No.heating element 18000W 230V heating circuits 6 ID ø 415mm ED Part No.417674Ref. No.Part No.418379Ref. No.description heating element 20000W 230VFor models:CM62, SCC62Part No.418375Ref. No.Part No.417683Ref. No.Part No.418377Ref. No.Part No.417689Ref. No.heating element 9000W 230V heating circuits 3 ID ø 385mm ED RATIONAL heATINg eLemeNTs1Part No.417690Ref. No.heating element 9000W 230V heating circuits 3 ID ø 407mm ED øPart No.418378Ref. No.heating element 9000W 230V heating circuits 3 ID ø 410mm ED øPart No.417691Ref. No.heating element 9000W 230V heating circuits 3 ID ø 440mm EDø 453mm L 470mm H 140mm L1 20mm W1 163mm H1 30mm H2Part No.417692Ref. No.heating element 9000W 230V heating circuits 3 ID ø 445mm ED øPart No.417693Ref. No.heating element 9000W 230V heating circuits 3 ID ø 504mm ED øPart No.417697Ref. No.heating element 9000W 230V heating circuits 4 ID ø 310mm EDheating elements RatiOnal8Find the complete and up-to-date range of products on https://9Find the complete and up-to-date range of products on https://1e l e c t r i c c o m p o n e n t s Part No.417698Ref. No.heating element 9000W 400V heating circuits 3 ID ø 385mm ED Part No.415239Ref. No.descriptionheating element 9000W 400V heating circuits 3 ID ø 440mm ED ø 453mm L 465mm H 140mm L1 15mm W1 150mm H1 30mm H2RATIONAL heATINg eLemeNTs1thermostatsPart No.375160Part No.375086descriptionthermostat t.max. 180°C temperature range 60-180°C 1-pole 1CO16A probe ø 6mm probe L 90mm capillary pipe 2400mm capillarypipe isolated 2300mm gland nut shaft ø 6x4.6mm shaft L 25mm shaftPart No.375401Ref. No.descriptionthermostat t.max. 185°C temperature range 97-185°C 1-pole 1NO16A probe ø 6mm probe L 87mm capillary pipe 1430mm capillarypipe isolated 1100mm gland nut M9x1 shaft ø ø6x4.6mm shaft LPart No.375087descriptionthermostat t.max. 300°C temperature range 50-300°C 1-pole 1CO16A probe ø 3.03mm probe L 160mm capillary pipe 1130mm capil-lary pipe isolated 1103mm gland nut shaft L 23mm shaft positionPart No.375066descriptionthermostat t.max. 300°C temperature range 60-300°C 1-pole 1CO16A probe ø 4mm probe L 98mm capillary pipe 1450mm capillarypipe isolatedmm gland nut shaft ø 6x4.6mm shaft L 25mm shaftPart No.375088descriptionthermostat t.max. 300°C temperature range 60-300°C 1-pole 1NO16A probe ø 4mm probe L 100mm capillary pipe 830mm capillarypipe isolated 800mm gland nut shaft L 15mm shaft position upperthermostats ratIoNaL10Find the complete and up-to-date range of products on https://11Find the complete and up-to-date range of products on https://1e l e c t r i c c o m p o n e n t s Part No.375085descriptionthermostat t.max. 90°C temperature range 0-90°C 1-pole 1CO 16A probe ø 3.1mm probe L 247mm capillary pipe 1430mm capillary pipe isolated 1400mm gland nut shaft ø 6x4.6mm shaft L 18mm shaft Part No.375074descriptionsafety thermostat switch-off temp. 365°C 2-pole 16A probe ø 4mm probe L 116mm capillary pipe 1170mm capillary pipe isolated 1100mm gland nut probe with special screwing screw connection Part No.375090descriptionsafety thermostat switch-off temp. 365°C 2-pole 16A probe ø 4mm probe L 120mm capillary pipe 1170mm capillary pipe isolated Part No.375084descriptionsafety thermostat switch-off temp. 135°C 1-pole 10A probe ø6mm probe L 83mm capillary pipe 1440mm capillary pipe isolated Part No.375776descriptionsafety thermostat switch-off temp. 135°C 1-pole 10A probe ø6mm probe L 87mm capillary pipe 1440mm capillary pipe isolated Part No.375775descriptionsafety thermostat switch-off temp. 160°C 1-pole 10A probe ø6mm probe L 87mm capillary pipe 1440mm capillary pipe isolated 1400mm gland nut probeRATIONAL TheRmOsTATs1Part No.375984Ref. No.descriptionsafety thermostat switch-off temp. 225°C 3-pole 3NC 20A probe ø6mm probe L 94mm capillary pipe 900mm capillary pipe isolated670mm gland nut M10x1 probe SSPart No.375890descriptionsafety thermostat switch-off temp. 650°C 3-pole starting tempera-ture 624°CPart No.390797Ref. No.descriptionsafety thermostat switch-off temp. 157°C 1-pole 16A probe ø6mm probe L 62mm capillary pipe 1520mm capillary pipe isolated1380mm gland nut probePart No.375862descriptionsafety thermostat switch-off temp. 183°C 1-pole 16A probe ø6mm probe L 61mm capillary pipe 1460mm capillary pipe isolated1400mm gland nut probe SSPart No.390977Ref. No.descriptionsafety thermostat switch-off temp. 360°C 1-pole 16A probe ø 4mmprobe L 102mm capillary pipe 1200mm capillary pipe isolated820mm gland nut 1/4“ probe SSPart No.375774safety thermostat switch-off temp. 365°C 1-pole 16A probe ø4mm probe L 96mm capillary pipe 1160mm capillary pipe isolatedthermostats ratIoNaL1e l e c t r i c c o m p o n e n t s Part No.375159safety thermostat switch-off temp. 365°C 1-pole 16A probe øPart No.375083descriptionthermostat t.max. 250°C temperature range 60-250°C 1-pole 1NO 16A probe ø 4mm probe L 100mm capillary pipe 3150mm capillary pipe isolated 3090mm gland nut shaft ø ø6x4.6mm shaft L 23mm Part No.375570Ref. No.descriptionthermostat t.max. 470°C temperature range 100-470°C 1-pole 1NO 16A probe ø 3.9mm probe L 228mm capillary pipe 1110mm capillary Part No.375739Ref. No.switches and momentary switchespush/momentary push switchesPart No.347178Part No.346508Part No.345136RATIONAL TheRmOsTATs /swITches ANd mOmeNTARy swITches1Part No.345125Part No.345216Part No.347949Part No.400023Ref. No.Part No.300048Ref. No.description cam switch 2 operating positions core temperature sequence 1-2 shaft ø 6x4.6mm connection male faston 4-polePart No.300046Ref. No.cam switch 4 operating positions 5NO sequence 0-1-2-3 16A shaft ø switches and momentary switches rationaL1e l e c t r i c c o m p o n e n t sPart No.300049Ref. No.description cam switch 4 operating positions 8NO sequence 0-1-2-3 16A shaft ø Part No.300070Ref. No.description cam switch 5 operating positions 9NO sequence 0-1-2-3-4 16A shaft ø 6x4.6mm shaft L 23mm connection male faston 6.3mm plastic Part No.300051Ref. No.description cam switch 6 operating positions 2NO sequence 1-0-2-3-4-5 6A shaft ø 6x4.6mm shaft L 33mm connection male faston 6.3mm plastic rotary switchesPart No.300052Ref. No.description rotary switch 2 1-2 sets of contacts 4 type D1155N 400V 12A connec-tion screwPart No.300047Ref. No.description rotary switch 4 operating positions 9-pole For models:CD101, CD20, CD201Part No.345217Ref. No.RATIONAL swITches ANd mOmeNTARy swITches1Part No.346510Ref. No.description magnetic switchPart No.3465151Ref. No.1Part No.345109Ref. No.Part No.346511descriptionmagnetic switch 230V 0.2A P max. 50W probe L 60mm 1NO connec-Part No.346514Part No.345110magnet ømm L 25mm H 9mm W 15mmPart No.541986description magnet holder with magnet ø 13mmswitches and momentary switches rationaL1e l e c t r i c c o m p o n e n t s control equipmentPart No.345174Part No.345207push button mounting measurements ø22mm transparent reset Part No.110261descriptionrotary selectorPart No.110260Part No.347709Part No.359606Part No.300198Part No.300196description potentiometer 0-150RATIONAL cONTROL equIpmeNT /eNcOdeRs ANd pOTeNTIOmeTeRs1encoders and potentiometers/lamps rational Part No.403719Part No.300197potentiometer 4.7KOhm rotation 360° shaft ø 5.9mm with switchPart No.300000Part No.300058Part No.300059Part No.300266Part No.Part No.359598Part No.359608Part No.359597description light bulb socket T10 24V 2W ø 10mm L 28mm1e l e c t r i c c o m p o n e n t s RATIONAL LAmpsPart No.359606Part No.359585Part No.359886Part No.Part No.359887Part No.359606Part No.3595851lamps RaTIONal Part No.359610Part No.359598Part No.359608Part No.359597description light bulb socket T10 24V 2W ø 10mm L 28mmPart No.359596oven lampsPart No.359720oven lamp mounting ø 35.5mm 230V 15W socket E14 temp.-resist.Part No.3597011e l e c t r i c c o m p o n e n t s RATIONAL LAmpsPart No.359723Part No.359705description oven lamp glass thr.ø 33.5mm ø 52mm hard glas temp.-resist. 350°CPart No.359888Part No.359876Part No.3598801lamps RaTIONal Part No.359879Part No.360724Part No.359877Part No.359873Part No.359882Part No.359881Part No.359878Part No.359874Part No.3598751e l e c t r i c c o m p o n e n t s RATIONAL LAmps /TImeRs /ALARm devIcesPart No.359610Part No.359888timerselectric timersPart No.350015timer MS65 without bell operation time 120min time spreadminPart No.350074alarm devicesbuzzersPart No.3501361alarm devices/contactors rational Part No.350053Part No.350050Part No.350091Part No.380772Part No.381501Part No.3820011e l e c t r i c c o m p o n e n t s RATIONAL cONTAcTORsPart No.381203descriptionpower contactor resistive load 65A 230VAC (AC3/400V) 32A/15kW main contacts 3NO auxiliary contacts 1NO connection screw connec-Part No.381180description power contactor resistive load 80A 230VAC (AC3/400V) 40A/18.5kW Part No.3806781contactors ratIonaL Part No.380267Part No.380498power contactor resistive load 20A 230VAC (AC3/400V) 9A/4kW main1e l e c t r i c c o m p o n e n t s RATIONAL cONTAcTORsPart No.3802611contactors ratIonaLPart No.380269Part No.1e l e c t r i c c o m p o n e n t s RATIONAL cONTAcTORsPart No.380268Part No.Part No.380169Ref. No.description motor protection circuit breaker Part No.380170Ref. No.description motor protection circuit breaker For models:CC201, CD20, CD201, CM201MOELLER/EATONPart No.380515Part No.380171descriptionpower contactor resistive load 20A 230VAC (AC3/400V) 9A/4kW main contacts 3NO auxiliary contacts 1NO connection screw connection1contactors ratIonaLPart No.380163Ref. No.description motor protection circuit breaker type PKZMPart No.380175TELEMECANIQUE (Schneider Electric)Part No.380367Part No.3801881e l e c t r i c c o m p o n e n t s RATIONAL cONTAcTORsPart No.380300description motor protection circuit breaker type Mbs25-016 setting range 1-1.6A (AC3/400V) 0.55kW Part No.380301description motor protection circuit breaker type Mbs25-025 setting range 1.6-2.5A (AC3/400V) 1.1kW Part No.380304description motor protection circuit breaker type MS25-10 setting range 6.3-10A (AC3/400V) 4kWPart No.380305auxiliary contact contacts 1NO/1NC HMS11Part No.380397descriptionsmall relay switch 24V main contacts 1NO/1NC connection Faston miscellaneous1contactors/solid state relays rationalPart No.381225Ref. No.description power contactor setPart No.401672Ref. No.descriptionsolid state relay CELDUC 2 phase 50A 24-600V 7.5-25VDC L 58mm W46mm jumper at L1 and L2 screw type SOB665200 7.5-25VDCPart No.400105Ref. No.1e l e c t r i c c o m p o n e n t s RATIONAL sOLId sTATe ReLAys /ReLAysPart No.401670Ref. No.descriptionsolid state relayPart No.380502description power relays connection 2.0 plug-in connectionplug-in/print relaysPart No.380501description print relay 12VDCPart No.380281Part No.380283time relay FINDER 82.41.0.240 time range 0.05s-10h 24-240VAC/24-Part No.380319description time relay pickup-delayed 0.06-150sPart No.3802801relays/transformers ratIonalPart No.380282time relay WIELAND NGZ310 time range 1.5-30s 24-240V AC/DC 5Atransformersopen transformersPart No.400104descriptiontransformer primary 230VAC secondary 24VAC 40VA secondary 1.7Aconnection screw 50/60Hz with fusePart No.403774descriptiontransformer primary 400/415/440/480 secondary 240/208 320/820VAsecondary 1.33A H 107mm L 120mm W 105mm type block for com-Part No.403057transformer primary 400/415/440/480V secondary 208/240VPart No.400101description transformer primary 200-260VAC secondary 4.2/14.4/11.5VAC 68.4VAPart No.400117descriptiontransformer primary 200-230V secondary 11.5V 20VA 50/60Hz tem-perature restriction 131°C ambient temperature max. 60°CPart No.400102description transformer primary 230VAC secondary 11.5VAC 10VA1e l e c t r i c c o m p o n e n t s RATIONAL TRANsfORmeRs /eLecTRONIc cONTROLLeRsPart No.400118description transformer primary 230VAC secondary 21VAC 35VA Part No.401472descriptiontransformer 1/20/50VA secondaryA H 70mm L 76mm W 104mm connection plug 50/60Hz type 110170 with fuse secondary Part No.401473description transformer 21.6VA H 70mm L 94mm W 71mm connection plug 50-60Hz type 40.00.592 moulded secondary 12VDC primary 200-250VAC Part No.401470description transformer primary 230V secondary 11.5V 10VA Part No.401471description transformer primary 230V secondary 11.5V 20VAelectronic controllersELIWELLPart No.378303Ref. No.electronic controller ELIWELL type IDPlus 902 mounting measure-Table continues overleaf1electronic controllers/probes rAtionAlprobesproducer-specific probesPart No.381430Ref. No.3014.1000temperature probe thermocouple K (NiCr-Ni) cable silicone probe1e l e c t r i c c o m p o n e n t s RATIONAL pRObesPart No.379425Ref. No.3014.0157Part No.378351Ref. No.40.03.528Part No.379864Ref. No.40.00.395 40.00.594 40.01.097 40.01.099Part No.379441Ref. No.40.00.291Part No.379869Ref. No.40.00.287 40.00.398 87.00.058Part No.379442Ref. No.40.01.0941probes rATIoNALPart No.693523Ref. No.22.00.479descriptionbracketPart No.693522Ref. No.22.00.480descriptionbracket for core temperature probePart No.693524Ref. No.22.00.453descriptionbracket for core temperature probe L 80mm ø 16mm40.00.298Part No.378646Ref. No.24.01.122descriptioncore temperature probe cable PTFE connection coded plug probe ø3x100mm cable length 2.7m handle ø 12mm handle length 44mmPart No.381443Ref. No.40.04.040Pdescriptioncore temperature probe CM_P 61-102 cable PTFE insulated probe -40 up to +250°C probe ø3x100mm cable length 2.45m handle ø 12mm handle length 44mm1e l e c t r i c c o m p o n e n t s RATIONAL pRObes3035.0714 1multipoint probe40.00.295 140.02.100Part No.379865Ref. No.40.00.296 40.00.297 40.00.608Part No.3798661Ref. No.40.00.293 40.00.294 40.00.606 11probes /electronics rAtionAlPart No.550366Part No.901571Ref. No.Part No.403018Ref. No.description EPROM type CPC CODE XS5.06S For models:CPC101, CPC102, CPC201, CPC202, CPC61Part No.400084description control PCBFor models:CCM101, CCM102, CCM201, CCM202, CCM61Part No.400100Ref. No.description control PCBFor models:CCC101, CCC102, CCC201, CCC202, CCC61Part No.402920description control PCB combi-steamer CD 101/CM 101 suitable for RATIONAL For models:CD101, CD102, CD201, CD202, CD61, CM101, CM102, CM201, CM202,1e l e c t r i c c o m p o n e n t s RATIONAL eLecTRONIcsPart No.400098Part No.400103Ref. No.description control PCB combi-steamer CM 61-202 L 460mm W 154mm 61-202Part No.400099Ref. No.description control PCB combi-steamer CM101For models:CM101, CM102, CM201, CM202, CM61Part No.400107description control PCB combi-steamer CM101 edition CM v. 4.91-97For models:CM101, CM201Part No.402827Ref. No.Part No.403319description control PCB combi-steamer CPC-Linie CM 61-202/G model since 10/1997Part No.401475Ref. No.Part No.403796Ref. No.1electronics rAtionAlPart No.403797Ref. No.control PCB for combi-steamer SCC_WE, CM_P 61-202 modelPart No.400109description control PCB regulation and control electronicsFor models: CM101, CM201Part No.403889Ref. No.description display for combi-steamer SCC_WE 61-202 complete incl. controlPart No.401490Part No.401938Ref. No.description keypad PCBPart No.400129Ref. No.1e l e c t r i c c o m p o n e n t s RATIONAL eLecTRONIcsPart No.401493Ref. No.description PCBFor models:CM101, CM201, CM62Part No.401479Ref. No.Part No.400077Ref. No.description PCB combi-steamer CCD 101/201 core temperature Part No.401487description PCB combi-steamer CD 101/CM 101 with axial flow fan for fan motor Part No.401662Ref. No.Part No.400110Ref. No.Part No.400033description PCB for gas valve 240V 28V1electronics/keypads/solenoid valves rationalPart No.401013motor break electronic 50/60Hz for RATIONAL breaking duration 4skeypadsfront foilsPart No.403795description front foil for combi-steamer SCC Line L 540mm W 175mmPart No.401012Part No.403781Ref. No.description membrane keypad for combi-steamer SCC Line L 230mm W 124mmPart No.373021Part No.3730171e l e c t r i c c o m p o n e n t s RATIONAL sOLeNOId vALvesPart No.370852description solenoid valve single straight 230VAC inlet 3/4“ outlet 11.5mm DN10Part No.370853solenoid valve single straight 230VAC inlet 3/4“ outlet 11.5mm input Part No.370851solenoid valve double straight 230VAC inlet 3/4“ outlet 11.5mm Part No.371016Part No.370065solenoid valve double straight 230VAC inlet 3/4“ outlet 11.5mm1solenoid valves RaTionalPart No.370368solenoid valve single straight 230VAC inlet 3/4“ outlet 11.5mm DN10Part No.370006Part No.370195solenoid valve body double straight inlet 3/4“ outlet 11.5mm DN10Part No.370133solenoid valve body single straight inlet 3/4“ outlet 11.5mm DN10Part No.370132solenoid valve body triple straight inlet 3/4“ outlet 11.5mm DN101e l e c t r i c c o m p o n e n t s RATIONAL sOLeNOId vALvesPart No.Part No.370672Part No.370371Part No.370370Part No.370372Part No.370840Part No.3702701solenoid valves/pressure switches rationalPart No.371323solenoid valve filter ø 19.5mm H 10.5mm suitable for RATIONALPart No.699812pressure switchesPart No.541108description pressure controlPart No.541111for combi-steamersPart No.345709pressure control ø 84mm pressure range 0-3mbar for humidity mea-Part No.3452181e l e c t r i c c o m p o n e n t s RATIONAL pRessuRe swITches /eLecTROdesPart No.541329Part No.403298Ref. No.Part No.403297Ref. No.44.00.514 87.01.219Part No.400163Ref. No.Part No.403138Ref. No.descriptionlevel electrode PG9 total length 100mm probe L 85mm insulated probe length 70mm with connection cable connection coded plugPart No.400021Ref. No.Part No.400022Ref. No.Part No.401492description level electrode probe L 85mm1electrodes/flow meters and flow sensors/fans ratIonal Part No.401491Ref. No.Part No.403886Ref. No.Part No.403804Ref. No.44.00.28744.01.37187.01.221ﬂow meters and ﬂow sensorsflow sensorsPart No.403301Ref. No.flow sensor inlet ø 10mm outlet ø 10mm L 104mm connectionPart No.402256Ref. No.Part No.403302Ref. No.Part No.6010301descriptionaxial fan L 119mm W 119mm H 38mm 230VAC 50Hz 18W bearingball bearing manuf. no. 4656Z metal connection male faston 2.8mmebm-papst fan wheel ø 110mm temp.-resist. 75°C1with ball bearingsPart No.6013091descriptionaxial fan L 127mm W 127mm H 38mm 12VDC 21W bearing ball bea-ring manuf. no. DV5212N metal connection cable ebm-papst suitablefor RATIONAL fan wheel ø 120mm temp.-resist. 65°C11e l e c t r i c c o m p o n e n t s RATIONAL fANsPart No.6017521descriptionaxial fan L 127mm W 127mm H 38mm 12VDC 21W bearing ballbearing manuf. no. DV5212N plastic/metal connection cable 310mm ebm-papst fan wheel ø 120mm temp.-resist. 65°C SCC Line since 1Part No.6011131Ref. No.3101.1013descriptionaxial fan L 172mm W 150mm H 38mm 230VAC 50/60Hz 27/28W bea-ring ball bearing connection male faston 2.8mm manuf. no. 7056ES metal ebm-papst fan wheel ø 145mm temp.-resist. 55°CCM102, CM201, CM202, CPC102, CPC201, CPC2021Part No.6010801descriptionaxial fan L 119mm W 119mm H 38mm 230VAC 50/60Hz 23/20W bearing ball bearing connection male faston 2.8mm metal ADDA fan wheel ø 110mm temp.-resist. 70°C1with ball bearingsPart No.6017121descriptionaxial fan L 120mm W 120mm H 38mm 12VDC 10W bearing ball bea-ring connection cable 320mm plastic ADDA fan wheel ø 110mm1with ball bearingsPart No.6016701descriptionaxial fan L 80mm W 80mm H 25mm 12VDC 1.8W bearing ball bearing connection cable 300mm fan wheel ø 75mmCD101, CD102, CD201, CD202, CD61, CM101, CM102, CM201, CM202, 1Part No.602141descriptionguard with filter for axial flow fan L 126mm W 126mm H 13.5mm mounting distance 115mm suitable for ebm-papst。

3200系列侧挂90度转速驱动包 для重载减速机械臂安装、维护与配件手册说明书

For other service manuals visit our website at:/service_manuals.aspDORNER MFG. CORP .INSIDE THE USA OUTSIDE THE USA P .O. Box 20 • 975 Cottonwood Ave.TEL: 1-800-397-8664TEL: 262-367-7600Hartland, WI 53029-0020 USA FAX: 1-800-369-2440FAX: 262-367-5827851-767 Rev. B3200 Series Side Mount 90° Drive Package for Heavy LoadGearmotorsInstallation, Maintenance & Parts ManualDorner Mfg. Corp.2851-767 Rev. B3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsTable of ContentsIntroduction......................................................................... 2Warnings - General Safety.................................................. 3Product Description............................................................. 4Specifications...................................................................... 4Gearmotor Mounting Package Models:........................... 4Table 1: 60 Hz Gearmotor Specifications........................ 4Table 2: Belt Speeds for Fixed Speed90° 60 Hz Gearmotors..................................................... 5Table 3: Belt Speeds for Variable Speed90° 60 Hz Gearmotors..................................................... 5Table 4: Belt Speeds for Fixed Speed90° 60 Hz VFD Gearmotors............................................ 5Table 5: 50 Hz Gearmotor Specifications........................ 6Table 6: Belt Speeds for Fixed Speed90° 50 Hz Gearmotors..................................................... 6Table 7: Belt Speeds for VFD Variable Speed90° 50 Hz Gearmotors (6)Installation............................................................................ 7Required Tools................................................................. 7Mounting.......................................................................... 7Preventive Maintenance and Adjustment............................ 9Required Tools................................................................. 9Gear Reducer Replacement.............................................. 9Motor Replacement........................................................ 11Notes.................................................................................. 12Service Parts....................................................................... 133200 Series Side Mount Drive Packagefor Heavy Load 60 Hz 90° Gearmotors.......................... 133200 Series Side Mount Drive Packagefor Heavy Load 50 Hz 90° Gearmotors.......................... 14Heavy Load 90° Gearmotors.......................................... 1560 Hz Gearmotors....................................................... 1550 Hz Gearmotors....................................................... 15Return Policy. (16)IntroductionUpon receipt of shipment:•Compare shipment with packing slip. Contact factory regarding discrepancies.•Inspect packages for shipping damage. Contact carrier regarding damage.•Accessories may be shipped loose. See accessory instruc-tions for installation.Dorner 3200 Series conveyors have patents pending.Dorner’s Limited Warranty applies.Dorner reserves the right to make changes at any time without notice or obligation.Dorner has convenient, pre −configured kits of Key Service Parts for all conveyor products. These time saving kits are easy to order, designed for fast installation, and guarantee you will have what you need when you need it. Key Partsand Kits are marked in the Service Parts section of this manual with the Performance Parts Kits logo.IMPORTANTSome illustrations may show guards removed. DO NOT operate equipment without guards.851-767 Rev. B3Dorner Mfg. Corp.3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsWarnings - General SafetyA WARNINGThe safety alert symbol, black triangle with white exclamation, is used to alert you to potential personal injury hazards.Climbing, sitting, walking or riding on conveyor will cause severe injury.KEEP OFF CONVEYORS.DO NOT OPERATE CONVEYORS IN AN EXPLOSIVE ENVIRONMENT.A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.AWARNINGGearmotors may be HOT.DO NOT TOUCH Gearmotors.A WARNINGExposed moving parts can cause severe injury.REPLACE ALL GUARDS BEFORE RUNNING CONVEYOR.A WARNINGDorner cannot control the physicalinstallation and application of conveyors. Taking protective measures is the responsibility of the user.When conveyors are used in conjunction with other equipment or as part of a multiple conveyor system, CHECK FOR POTENTIAL PINCH POINTS and other mechanical hazards before system start-up.Dorner Mfg. Corp.4851-767 Rev. B3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsProduct DescriptionRefer to Figure 1 for typical conveyor components.Figure 1SpecificationsGearmotor Mounting Package Models:Example:Table 1: 60 Hz Gearmotor Specifications1Conveyor2Gearmotor Mounting Package 3Gearmotor Assembly 4Spider Web Bushing5Shaft Coupling Half, Three Jaw 6Coupling Half, Three Jaw 7Key, Coupling 8Shaft9Key, Shaft172458963ItemHeavy Load GearmotorSingle- Phase Three Phase VFD Variable Speed DC Variable Speed Output Power0.5 hp (0.37 kw)0.5 hp (0.37 kw) - 2.0 hp (1.5 Kw)0.5 hp (0.37 kw) - 0.75 hp (0.56 Kw)Input Voltage 115VAC 208 - 230/460 VAC 230/460 VAC 90VDCInput Frequency 60Hz 6 - 60Hz N/AInput Current (Amperes)8 2 - 6.2 for 230V & 1 - 3.1 for 460V 1.6 - 5 for 230V & 0.8 - 2.5 for 460V5 - 7.5Gearmotor Ratios 7.5:1, 10:1, 15:1, 20:1, 25:1, 30:1, 40:1, 50:1, 60:1, 80:1, 100:1Frame Size 56C 56C for 0.5 hp - 1 hp & 145TC for 1.5 hp - 2 hp 56CMotor T ypeT otally enclosed, Fan cooledSpecifications Table 2: Belt Speeds for Fixed Speed 90° 60 Hz GearmotorsHeavy Load Gearmotors Belt Speed for Standard Belts Belt Speed for High Strength Belts Part Number RPM In-lb N-m Ft/min M/min Ft/min M/min 32M100HH4(vp)FN1791310317 5.221 6.4 32M080HH4(vp)FN228339422 6.7288.5 32M060HH4(vp)FN2967976298.83611.0 32M050HH423FN3812051363811.64814.6 32M040HH423FN4310231154313.15416.4 32M030HH423FN5812161375817.77322.2 32M025HH423FN7010681217021.38826.8 32M020HH423FN8611831348626.210832.9 32M015HH423FN11590910311535.114544.2 32M010HH423FN1736367217352.721866.4 32M008HH423FN2304825423070.129088.3 (vp) = voltage and phase11 = 115 V, 1-phase23 = 208 – 230/460 V, 3-phaseTable 3: Belt Speeds for Variable Speed 90° 60 Hz GearmotorsStandard Load Gearmotors Belt Speed for Standard Belts Belt Speed for High Strength Belts Part Number RPM In-lb N-m Ft/min M/min Ft/min M/min 32M100HHD9DEN2563071 2.5 - 25.00.8 - 7.7 3.1 - 31.00.9 - 9.4 32M080HHD9DEN3157464 3.1 - 31.00.9 - 9.4 3.9 - 39.0 1.2 - 11.8 32M060HHD9DEN4246853 4.2 - 42.0 1.3 - 12.8 5.3 - 53.0 1.6 - 16.1 32M050HHD9DEN5062470 5.0 - 50.0 1.5 - 15.2 6.3 - 63.0 1.9 - 19.2 32M040HHD9DEN6352960 6.3 - 63.0 1.9 - 19.27.9 - 79.0 2.4 - 24.0 Table 4: Belt Speeds for Fixed Speed 90° 60 Hz VFD GearmotorsHeavy Load Gearmotors Belt Speed for Standard Belts Belt Speed for High Strength Belts Part Number RPM In-lb N-m Ft/min M/min Ft/min M/min 32M100HH423EN17913103 1.7 - 17.00.5 - 5.2 2.1 - 21.50.1- 1.5 32M080HH423EN2283394 2.2 - 22.00.7 - 6.7 2.7 - 27.80.8 - 8.4 32M060HH423EN2967976 2.9 - 29.00.9 - 8.8 3.6 - 36.0 1.0 - 11.1 32M050HH423EN381205136 3.8 - 38.0 1.2 - 11.6 4.8 - 48.0 1.4 - 14.6 32M040HH423EN431023115 4.3 - 43.0 1.3 - 13.1 5.4 - 54.3 1.6 - 16.5 32M030HH423EN581216137 5.8 - 58.0 1.8 - 17.77.3 - 73.0 2.2 - 22.3 32M025HH423EN7010681217.0 - 70.0 2.1 - 21.38.8 - 83.4 2.6 - 26.9 32M020HH423EN8611831348.6 - 86.0 2.6 - 26.210.8 - 108.7 3.2 - 33.1 32M015HH423EN11590910311.5 - 115.0 3.5 - 35.114.5 - 145.3 4.4 - 44.2 32M010HH423EN1766367217.3 - 173.0 5.3 - 52.722.2 - 222.5 6.7 - 67.8 32M008HH423EN3304825433.0 - 330.010.5 - 100.641.7 - 417.212.7 - 127.13200 Series Side Mount 90° Drive Package for Heavy Load Gearmotors851-767 Rev. B5Dorner Mfg. Corp.Dorner Mfg. Corp.6851-767 Rev. B3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsSpecificationsTable 5: 50 Hz Gearmotor SpecificationsTable 6: Belt Speeds for Fixed Speed 90° 50 Hz GearmotorsTable 7: Belt Speeds for VFD Variable Speed 90° 50 Hz GearmotorsItemHeavy Load GearmotorThree Phase VFD Variable Speed Output Power 0.37 to 1.5 kw 0.37 to 1.5 kw Input Voltage 230 / 400 V 230 / 400 V Input Frequency50 Hz 25 to 63 HzInput Current (Amps)see tables 6 & 7Gearmotor Ratios 7.5:1, 10:1, 15:1, 20:1, 30:1, 40:1, 50:1, 80:1, 100:1Frame Size 90B5, 90B5, 90B5, 90B5, 90B5, 80B5, 80B5, 71B5, 71B5Motor T ypeTotally enclosed, Fan cooledPart Number Ratio RPM M/min Standard BeltsM/minHigh Strength BeltsKw Amps N-m 52Z100HH423FN 10014 4.3 5.30.37 2.1/1.212952Z080HH423FN 8017.5 5.3 6.70.37 2.1/1.211552Z050HH423FN 50288.510.70.55 2.6/1.512452Z040HH423FN 403510.713.40.55 2.6/1.510552Z030HH423FN 304714.218.1 1.1 4.7/2.716752Z020HH423FN 207021.326.9 1.1 4.7/2.712252Z015HH423FN 159328.435.8 1.5 6.1/3.512752Z010HH423FN 1014042.753.9 1.5 6.1/3.58952Z008HH423FN7.518756.972.01.56.1/3.568Part Number Ratio RPM M/min Standard BeltsM/minHigh Strength BeltsKw Amps N-m 52Z100HH423EN 1007 to 18 2 to 5 2 to 70.37 2.1/1.212952Z080HH423EN 809 to 22 3 to 7 3 to 80.37 2.1/1.211552Z050HH423EN 5014 to 35 4 to 11 5 to 130.55 2.6/1.512452Z040HH423EN 4018 to 44 5 to 13 6 to 160.55 2.6/1.510552Z030HH423EN 3023 to 597 to 188 to 22 1.1 4.7/2.716752Z020HH423EN 2035 to 8811 to 2713 to 33 1.1 4.7/2.712252Z015HH423EN 1547 to 11814 to 3618 to 45 1.5 6.1/3.512752Z010HH423EN 1070 to 17621 to 5426 to 67 1.5 6.1/3.58952Z008HH423EN7.593 to 23528 to 7235 to 901.56.1/3.568NOTEFor belt speed other than those listed, contact factory for details.851-767 Rev. B7Dorner Mfg. Corp.3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsInstallationRequired Tools•Hex key wrenches:2 mm, 2.5 mm,3 mm, 5 mm •Torque wrenchMountingInstallation Component List:1.Typical components (Figure 2).Figure 2Figure 32.Install spider bushing (Figure 4,item 1) in three jaw coupling (Figure 4,item 2).Figure 43.Verify that three jaw coupling half (Figure 4,item 3) is flush with and against flange (Figure 4,item 4) of shaft (Figure 4,item 5). Loosen set screw on coupling half and push onto shaft until flush, if necessary.4.Making sure key (Figure 4,item 6) is installed in slot in gear reducer output shaft assembly (Figure 4,item 5), install output shaft into gearmotor assembly. Raise gearmotor assembly and install three jaw coupling end of output shaft onto three jaw coupling (Figure 4,item 2).A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.1Conveyor2Gearmotor Mounting Package 3Gearmotor Assembly 4Spider Web Bushing5Shaft Coupling Half, Three Jaw 6Coupling Half, Three Jaw 7Key, Coupling 8Shaft9Key, Shaft172458963NOTEGearmotor may be operated in positions 1, 3 or 4 (Figure 3).132645InstallationNOTEBe sure four spacers on mounting screws(Figure 5,item2) are in place next toconveyor before installing gearmotor.5.Slide and pivot gearmotor and gearmotor mountingbracket (Figure 5,item1) onto four mounting screws(Figure 5,item2) (through slots in gearmotor bracket).22122Figure56.Tighten four mounting screws (Figure 5,item2).3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsDorner Mfg. Corp.8851-767 Rev. B851-767 Rev. B9Dorner Mfg. Corp.3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsPreventive Maintenance and AdjustmentRequired Tools•Hex-key wrenches:2 mm, 2.5 mm,3 mm, 5 mm•Adjustable wrench (for hexagon head screws)•Straight edge •Torque wrenchGear Reducer Replacement1.Loosen the four (4) mounting screws (Figure 6,item 1).Figure 62.Rotate gearmotor assembly and remove gearmotor mounting bracket (Figure 6,item 2) and entire gearmotor assembly from conveyor.3.Remove gear reducer output shaft assembly (Figure 7,item 1), and key (Figure 7,item 2) from coupler housing (Figure 7,item 3).Figure 74.Remove the four (4) coupler housing screws (Figure 8,item 1) and remove the mounting bracket and coupler housing (Figure 8,item 2) as an assembly.Figure 85.Remove four screws (Figure 9,item 1). Detach motor (Figure 9,item 2) from gear reducer (Figure 9,item 3), making note of position of switch (Figure 9,item 4) for reassembly. Retain motor output shaft key (Figure 9,item 5).Figure 9A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.A WARNINGGearmotor can rotate and fall off, causing injury.Support the gearmotor prior to removal.2111112311232451Dorner Mfg. Corp.10851-767 Rev. B3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsPreventive Maintenance and Adjustment6.Inspect gear reducer output shaft assembly for wear or damage. If necessary, loosen set screw (Figure 10,item 1) and remove 3 jaw coupling (Figure 10,item 2) from gear reducer output shaft (Figure 10,item 3).Figure 107.Remove and retain key (Figure 10,item 4) from shaft. Install new components for shaft reverse of removal. Tighten set screw (Figure 10,item 1) to 35 in-lb (4 N −m).Figure 118.With key (Figure 12,item 1) in keyway, slide motor (Figure 12,item 2) and gear reducer (Figure12,item 3) together, noting where position of switch (Figure 12,item 4) will be during installation on conveyor.Figure 129.Install screws (Figure 12,item 5) and tighten to 65 in −lbs (7.3 N −m).10.Install coupler housing (Figure 13,item 1) to gearreducer (Figure 13,item 2) and tighten screws (Figure 13,item 3).Figure 13plete steps 2 through 6 of “Mounting” sectionbeginning on page 7.NOTEIf replacing the 3 jaw coupling on conveyor or output shaft, the coupling hub surface (Figure 10,item 1) should be flush to both output shaft (Figure 10,item 2).IMPORTANTBe extremely careful when coupling motor to gear reducer. Avoid misalignment and forcing the connection causing possible permanent gear reducer seal damage.431212324153312851-767 Rev. B11Dorner Mfg. Corp.3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsPreventive Maintenance and AdjustmentMotor Replacement1.For single phase motor, unplug power cord from outlet.2.For three phase and VFD variable speed motor:a.Loosen terminal box screws (Figure 14,item 1) and remove cover (Figure 14,item 2).Figure 14b.Record wire colors on terminals 1, 2 and 3. Loosen wire nuts and remove wires 1, 2 and 3.c.Loosen cord grip and remove cord.3.For DC variable speed motor, unplug motor cord at disconnect (Figure 15,item 1).Figure 154.Remove four (4) screws (Figure 16,item 1). Detach motor (Figure 16,item 2) from gear reducer (Figure 16,item 3). Retain motor output shaft key (Figure 16,item 4).Figure 165.With key (Figure 16,item 4) in keyway, slide motor (Figure 16,item 2) and gear reducer (Figure16,item 3) together, noting where position of switch (Figure 16,item 5) will be during installation on conveyor.6.Install screws (Figure 16,item 1) and tighten to 65 in −lbs (7.3 N −m).7.Replace wiring:•For a single phase motor, reverse step 1.•For a three phase or VFD variable speed motor, reverse step 2.•For a DC variable speed motor, reverse step 3.A WARNINGExposed moving parts can cause severe injury.LOCK OUT POWER before removing guards or performing maintenance.Hazardous voltage will cause severe injury or death.LOCK OUT POWER BEFORE WIRING.112IMPORTANTBe extremely careful when coupling motor to gear reducer. Avoid misalignment and forcing the connection causing possible permanent gear reducer seal damage.132541Notes3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsDorner Mfg. Corp.12851-767 Rev. B851-767 Rev. B13Dorner Mfg. Corp.3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsService Parts3200 Series Side Mount Drive Package for Heavy Load 60 Hz 90° GearmotorsNOTEFor replacement parts other than those shown in this section, contact an authorized Dorner Service Center or the factory. Key Service Parts and Kits are identified by the Performance Parts Kits logo . Dorner recommends keeping these parts on hand.2Item PartNumber Description1807-1167Gearhead Cover 2807-1328 3 Jaw Rubber Spider 3807-1683 3 Jaw Coupling 4912-111Square Key 5350551Standoff Spacer6350552Mount Plate for Standard Belts 350550Mount Plate for High Strength Belts 351047Mount Plate for Nose Bar T ail 7352312Mount T ube8352313Output Shaft 9450195Cam Spacer10639971M Drop-In T ee Bar for T -Slot Frames Only 11920625M Socket Head Screw,M6-1.00 x 25 mm for T -Slot Frame 807-2344Self-Drilling Hex Head Screw,1/4-20 x 1.25" for Smart Slot Frames 129208100M Socket Head Screw, M8-1.25 x 100 mm 13950816M Low Head Cap Screw, M8-1.25 x 16 mm 14950835M Low Head Cap Screw, M8-1.25 x 35 mm15980618MSquare Key, 6 mm x 18 mmItem Part NumberDescriptionDorner Mfg. Corp.14851-767 Rev. B3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsService Parts3200 Series Side Mount Drive Package for Heavy Load 50 Hz 90° Gearmotors2Item PartNumber Description1807-1167Gearhead Cover 2807-1328 3 Jaw Rubber Spider 3807-1588O-Ring4807-1683 3 Jaw Coupling, 20 mm 807-2239 3 Jaw Coupling, 25 mm 5980850M Square Key 6350551Standoff Spacer7350552Mount Plate for Standard Belts 350550Mount Plate for High Strength Belts 351047Mount Plate for Nose Bar Tail8352312Mount T ube 9350321Output Shaft 10450195Cam Spacer11639971M Drop-In T ee Bar for T -Slot Frames Only 12920625M Socket Head Screw,M6-1.00 x 25 mm for T -Slot Frames 807-2344Self-Drilling Hex Head Screw,1/4-20 x 1.25" for Smart Slot Frames 139208100M Socket Head Screw, M8-1.25 x 100 mm 14950816M Low Head Cap Screw, M8-1.25 x 16 mm 15950835MLow Head Cap Screw, M8-1.25 x 35 mmItem Part NumberDescription851-767 Rev. B15Dorner Mfg. Corp.3200 Series Side Mount 90° Drive Package for Heavy Load GearmotorsService PartsHeavy Load 90° Gearmotors60 Hz Gearmotors50 Hz Gearmotors21Item Part No.Description162MH411FN Motor, 0.5hp (0.37Kw), 115 Volts, 60Hz, 1-Phase62MH411FR Motor, 0.5hp (0.37Kw), 115 Volts, 60 Hz, 1-Phase with Reversing62MH423Motor, 0.5hp (0.37Kw), 208-230/460 Volts, 60 Hz, 3-Phase32MS423EN Motor, 0.5hp (0.37Kw), 230/460 Volts, 3-Phase VFD62MHD9DEN Motor, 0.5hp (0.37Kw), 90 Volts DC 32MHD9DEN Motor, 0.75hp (0.56Kw), 90 Volts DC 32MHH423FN10Motor, 1.0hp (0.75Kw), 208-230/460 Volts, 60 Hz, 3-Phase32MHH423EN10Motor, 1.0hp (0.75Kw), 230/460 Volts, 60 Hz, 3-Phase VFD 32MHH423FN15Motor, 1.5hp (1.1Kw), 208-230/460 Volts, 60 Hz, 3-Phase32MHH423EN15Motor, 1.5hp (1.1Kw), 230/460 Volts, 60 Hz, 3-Phase VFD32MHH423FN20Motor, 2.0hp (1.5Kw), 208-230/460 Volts, 60 Hz, 3-Phase32MHH423EN20Motor, 2.0hp (1.5Kw), 230/460 Volts, 60 Hz, 3-Phase VFD232M008HH Gear Reducer 7.5:1 NEMA 140TC 32M010HH Gear Reducer 10:1 NEMA 140TC 32M015HH Gear Reducer 15:1 NEMA 140TC 32M020HH Gear Reducer 20:1 NEMA 140TC 32M025HH Gear Reducer 25:1 NEMA 140TC 32M030HH Gear Reducer 30:1 NEMA 140TC 32M040HH Gear Reducer 40:1 NEMA 56C 32M050HHGear Reducer 50:1 NEMA 56C 32M060HH Gear Reducer 60:1 NEMA 56C32M080HH Gear Reducer 80:1 NEMA 56C 32M100HHGear Reducer 100:1 NEMA 56CItem Part No. Description1826-285MTR,.37KW,1400R 230/400V 50 3P 826-286MTR,.55KW,1400R 230/400V 50 3P 826-287MTR,1.1KW,1400R 230/400V 50 3P 826-556MTR,1.5KW,1450R 230/400V 50 3P 252Z100HH Gear Reducer,100:1, 71B552Z080HH Gear Reducer,80:1, 71B552Z050HH Gear Reducer,50:1, 80B552Z040HH Gear Reducer,40:1, 80B552Z030HH Gear Reducer,30:1, 90B552Z020HH Gear Reducer,20:1, 90B552Z015HH Gear Reducer,15:1, 90B552Z010HH Gear Reducer,10:1, 90B552Z008HHGear Reducer,7.5:1, 90B5851-767 Rev. B Printed in U.S.A.Dorner Mfg. Corp. reserves the right to change or discontinue products without notice. Allproducts and services are covered inaccordance with our standard warranty. All rights reserved. © Dorner Mfg. Corp. 2014DORNER MFG. CORP .975 Cottonwood Ave., PO Box 20 Hartland, WI 53029-0020 USA TEL 1-800-397-8664 (USA)FAX 1-800-369-2440 (USA)Internet: Outside the USA:TEL 1-262-367-7600FAX 1-262-367-5827Return PolicyReturns must have prior written factory authorization or they will not be accepted. Items that are returned to Dorner without authorization will not be credited nor returned to the original sender. When calling for authorization, please have the following information ready for the Dorner factory representative or your local distributor: and address of customer.2.Dorner part number(s) of item(s) being returned.3.Reason for return.4.Customer's original order number used when ordering the item(s).5.Dorner or distributor invoice number (if available, part serial number).A representative will discuss action to be taken on the returned items and provide a Returned Goods Authorization (RMA) number for reference. RMA will automatically close 30 days after being issued. To get credit, items must be new andundamaged. There will be a return charge on all items returned for credit, where Dorner was not at fault. It is the customer’s responsibility to prevent damage during return shipping. Damaged or modified items will not be accepted. The customer is responsible for return freight.Returns will not be accep ted after 60 days from original invoice date. The return charge covers inspection, cleaning,disassembly, disposal and reissuing of components to inventory. If a replacement is needed prior to evaluation of returned item, a purchase order must be issued. Credit (if any) is issued only after return and evaluation is complete.Dorner has representatives throughout the world. Contact Dorner for the name of your local representative. Our Customer Service Team will gladly help with your questions on Dorner products.For a copy of Dorner's Warranty, contact factory, distributor, service center or visit our website at .For replacement parts, contact an authorized Dorner Service Center or the factory.Product TypeStandard ProductsEngineered to order partsProduct LineConveyors Gearmotors & Mounting Packages Support Stands Accessories Spare Parts (non-belt)Spare Belts - Standard Flat Fabric Spare Belts - Cleated & Specialty FabricSpare Belts -Plastic Chain All equipment and parts110030% return fee for all products except:50% return fee for conveyors with modular belt,cleated belt or specialty beltsnon-returnablecase-by-case22002200 Modular Belt 2200 Precision Move 23002300 Modular Belt 32003200 LPZ3200 Precision Move 4100520053006200Controls 7200 / 730050% return fee for all products7350non-returnable736074007600。

艾特镀金磨砂电路保护元件数据手册说明书

Product feature :•0603 (1608 metric) compact design utilizes less board space•Halogen free, lead free and RoHS compliant•High inrush withstand capability •Fast-acting performance•Ampacity alpha mark on fuse for easy identification•Standard termination design for easy solderability•Compatible with standard lead-free solder reflow and wave soldering processes•Excellent environmental integrityApplicationsFor secondary circuit protection in spaceconstrained applications:• LCD Backlight inverters • Digital cameras • DVD Players • Bluetooth headsets •Battery packsAgency information•cURus Recognized Guide and Card JDXY2/JDYX8, File E19180Packaging•TR - Packaging code suffix for tape-and-reel (8 mm wide tape on 178mm diameter reel -specification EIA 481-1)•Quantity = 5000 fusesCC06HHigh I 2t Chip™ 0603 size fuses7 014PbTechnical Data 4346Effective June 2017CC06H High I2t Chip™ 0603 size fusesElectrical characteristicsAmp Rating% of Amp Rating Opening Time 1-8A100 4 Hours1-7A2001-60 Seconds1-8A250 5 Seconds Max SpecificationsPart NumberAmpRating5VoltageRating(Vdc)InterruptingRating1, 4(A)Typical ColdResistance2(Ω)TypicalPre-Arcing3(I2t)TypicalVoltageDrop(mV)TypicalPowerDissipation(W)AlphaMarkingAgencyInformation(cURus)CC06H1A132500.250.023100.32B x CC06H1.5A 1.532500.130.072500.38H x CC06H2A232500.0680.141700.38K x CC06H2.5A 2.532500.050.251550.38L x CC06H3A332500.0350.301300.38O x CC06H3.5A 3.532500.0230.501000.35R x CC06H4A432500.020.81100.45S x CC06H5A532500.013 1.6950.48T x CC06H6A632500.0076 2.6800.48V x CC06H7A732500.0056 3.3800.56X x CC06H8A832/2450/800.0040 4.5750.60Z x1.DC Interrupting Rating (measured at rated voltage, time constant of less than 50 microseconds, battery source).2.DC Cold Resistance are measured at <10% of rated current in ambient temperature of 20°C -FOR REFERENCE ONLY - CONTROLLED VALUES HELD BY PLANT AND SUBJECT TO CHANGE WITHOUT NOTICE.3.Typical Pre-arcing I2t are measured at rated DC voltage, 10Incurrent (not to exceed interrupting rating).4.The insulation resistance after breaking capacity test is higher than 0.1MΩ when measured by 2X rated voltage.5.Device designed to carry rated current for 4 hours minimum. An operating current 80% or less of rated current is recommended,with further design derating required at elevated ambient temperature. See Temperature Derating Curve on next page./el ectronics23Technical Data 4346Effective June 2017CC06HHigh I 2t Chip™ 0603 size fuses Time-current curves — average melt/el ectronics4Technical Data 4346Effective June 2017CC06HHigh I 2t Chip™ 0603 size fusesI 2t vs. time curvesI 2t (A 2s )5Technical Data 4346Effective June 2017CC06HHigh I 2t Chip™ 0603 size fuses I 2t vs. current curvesI 2t (A 2s )/el ectronics6Technical Data 4346Effective June 2017CC06HHigh I 2t Chip™ 0603 size fusesT emperature derating curve Product characteristicsOperating temperature -40 °C to +85 °C , with proper derating factor applied Storage temperature -40 °C to +85 °CLoad humidity MIL-STD-202G, Method 103B (1000 hr @ +85 °C / 85% RH & 10% rated current)Moisture resistance MIL-STD-202, Method 106E (50 cycles)Thermal shock MIL-STD-202, Method 107D (-65 °C to +125 °C, 100 cycles)Vibration testMIL-STD-202, Method 204D, Test Condition D (10-2,000 Hz)Mechanical shock resistance MIL-STD-202, Method 213B (3000 G / 0.3 ms)Salt spray resistance MIL-STD-202, Method 101, Test Condition B (48 h ou r exposure)Insulation resistance The insulation resistance after breaking capacity test is higher than 0.1 M Ω when measured by 2X rated voltage SolderabilityJ-STD-002C Method B1 (Dip and Look Test), Method G1 (Wetting Balance Test), Method D (Resistance to Dissolution / Dewetting of Metalization)Resistance to soldering heat MIL-STD-202, Method 210F (Solder dip +260 °C, 60 seconds / Solder Iron +350 °C, 3-5 seconds)High temperature life test MIL-STD-202G, Method 108A (1000 Hours @ +70 °C & 60% rated current)Resistance to solventsMIL-STD-202, Method 215KDimensions - mm (in)Drawing not to scale.0.47 ± 0.08Pad layoutA 0B 0D 0E 1E 2F G P 0P 1P 2T W 0.95±0.051.80±0.051.50+0.10,-0.01.75±0.106.25±0.303.50±0.050.75min.4.00±0.104.00±0.102.00±0.050.060±0.058.00±0.20*Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum.** Tolerance for time at peak profile temperature (t p ) is defined as a supplier minimum and a user maximum.Solder reflow profileTechnical Data 4346Effective June 2017CC06HHigh I 2t Chip™ 0603 size fusesLife Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin.EatonElectronics Division 1000 Eaton Boulevard Cleveland, OH 44122United States/electronics © 2017 EatonAll Rights Reserved Printed in USAPublication No. 4346 BU-SB14476 June 2017Eaton is a registered trademark.All other trademarks are property of their respective owners.。

Asahi America, Inc. 沥沥6坑道工具操作手册说明书

Proweld™ EquipmentOperations & MaintenanceManualField 6 Trench Tool (220V)Tel: 781-321-5409 ● Fax: 800-787-6861 ● Toll Free: 800-343-3618 ● asahi@Direct Sales: East 800-232-7244 / Central 800-442-7244 / West: 800-282-7244TABLE OF CONTENTSSection Page I. Safety Precautions 3 II. Welding Conditions 4 III. Machine Set Up and Operation 5 IV. Welding Parameters 10 V. Maintenance 13 VI. Asahi/America Contacts 14Section I - Safety Precautions for Trench Machines1. Keep working area clean and tidy.2. Keep electrical tools away from moisture. Never use in wet environment or humidconditions. Working area should be well illuminated. Keep tools away from chemicals and other corrosive materials.3. Keep visitors at a safe distance.4. Electrical tools not in use should be stored away safely.5. Do not wear loose clothing or jewelry. They can inadvertently get stuck in the moving partsof the machine causing injury.6. Never carry tools by the electric cable. Never unplug by pulling the cable. Keep cables awayfrom oil, heat and sharp edges.7. Always check that the pipe and fittings are clamped down tightly.8. The heating element can reach temperatures in excess of 570° F (300° C). Do not touch thesurface, and keep non-operating personnel at a safe distance.9. Do not touch facing unit blades while tool is connected to power supply. Activate facing unitonly when it is in the working position.10. When bringing clamps and pipe together, make sure hands are not between the clamps.11. Keep tools clean and sharpened. They produce better and safer results. Missing andworn-out parts should be replaced immediately. Always assure that the accessories are properly mounted on the machine. Only use factory parts.12. Always disconnect the machine when not in use when performing maintenance or whenaccessories are being changed.13. Before connecting to power, check that any accessory tools (e.g. facing unit motor) areturned off.14. Always use correct extension cable.15. Do not use tools and machines when housing or handles, specifically plastic ones, are bentor cracked. Dirt and humidity in any fracture can lead to electrical shock should theinsulation in the machine be damaged.Section II - Welding Conditions1. The welding environment needs to be protected against unfavorable conditions, e.g. rain,wind, dust, excessive humidity or temperature below 41° F (5° C).2. It’s necessary to have adequate pipe wall temperature for welding. If necessary, the pipehas to be warmed up or an environmentally-controlled welding t ent needs to be set up. If these conditions are met, the welding can be performed at virtually any environmentaltemperature. It is advisable to verify the weld quality by making some test welds at the given conditions.3. Should the pipe be irregularly heated by intense sunshine, it may be necessary to cover thepipe ends to be welded so that a balanced temperature is obtained.4. The pipe ends to be welded must be checked for damage and be free from oil, grease, dirtand other contaminates. Cleaning the pipe ends must be done just prior to welding.5. The weld must be kept free from external stresses during the weld process until the materialhas sufficiently cooled.6. The weld process has to be observed continuously. It is recommended to keep a record ofeach weld.7. A stop watch is to be available in order to register the actual times for heating up andcooling down.8. A heat stick or pyrometer is to be available in order to verify the correct heating elementtemperature.9. A table is to be available from which you can read the parameters that are prescribed by thewelding regulation for the pipe dimension to be welded.10. The heating element surfaces are to be clean and, above all, free from grease. Therefore,they are to be cleaned with lint-free paper and detergent (e.g. isopropyl alcohol) before every welding or if they are dirty.Section III - Machine Set Up and Operation1. General Tool InformationA. Size Range: 1½“ - 6” (50mm - 160mm)Amperage: 20 Amp.Voltage: 110V ACB. Additional Technical DataPipe/Fitting Material: PE, PP, PVDFPipe/Fitting Sizes: 1½” - 6” (50mm - 160mm)Transport box (L x B x H): 33” x 33” x 26”Weight: Approx. 270 lbs.Fuse: 20 AmpVoltage Requirement: 220 V (+/- 10%)2. Hydraulic Hose Connection & Electrical ConnectionA. Use the two hydraulic hoses to connect the basemachine to the hydraulic unit. The non-drippingquick couplings need to be kept free of dirt. Whennot in use, put on the red caps as protection.⇒Note: Before disconnecting the hoses, make surethat there is zero pressure in the hoses. If there ispressure in the hoses, it will be difficult to re-connect the hoses.B. Put heater and facing unit into the storage case.C. Connect the heating element and facing unit powercables to the power outlets on the hydraulic unit.3. Heating Element Temperature SettingA. The thermostat is located on the handle of theheating element. The main amber light will be onwhen there is power to the unit. The green light willbe on when the unit is heating and will blink whenthe unit is up to temperature.B. Set the thermostat to the appropriate temperature.I. HDPE 420° F - 446° F (215° C - 230° C)II. PP 393° F - 410° F (200° C - 210° C)III. PVDF 436° F - 446° F (225° C - 230° C) 4. Installation of Reducer InsertsA. Unscrew the already mounted reduction insertsfrom the master clamps.B. Screw on the reduction inserts with thecorresponding diameter into the master clamps.C. If necessary (e.g. T-pieces), the fixed outsideclamping tool can be dismantled by unscrewing thethree allen screws.5. Preparation for WeldingA. Place the hydraulic unit so that the manometer iseasily visible. Pull the lever to (< >) and hold untilthe welding carrier has moved back all the way.B. Open the clamps and insert the pipe or fitting thatis to be welded, allowing enough space betweenthe pipe ends for placing the facing unit. Mount theupper clamps and tighten them with the brass nuts.C. Check whether both worked pieces are clampedtight by applying the weld pressure to ensure thatthey do not slide back in the clamps.6. FacingA. Place the facing unit onto the machine shaftsbetween the two pipe ends. Make sure the safetylever is locked in place.B. With the hydraulic unit, carefully move the weldingcarrier in to the rotating facing unit. Use thehydraulic control to adjust the proper pressure forfacing. Do not use too much pressure during thefacing process, as this can burn out the facing unit.7. Adjustment of Carrier Movement Pressure (Drag Pressure)A. Turn the pressure control valve counter clockwise to release the hydraulicpressure.B. Move the lever on the hydraulic unit in the direction (> <) and slowly turn thepressure control valve in a clockwise direction until the carrier moves. Read off thepressure at the manometer (pressure gage on the hydraulic unit). This pressure(referred to as drag pressure) must be added to the calculated weld pressure.C. Bring the pipe ends together and turn the pressure control valve to set the weldpressure (carrier movement pressure + calculated weld pressure).⇒Note: For welding pressures and times, please refer to welding parameters.Instructions how to access parameters are located in section IV.8. AlignmentA. With the pipe ends together, check for any offset. Small adjustments for high lowcan be made by tightening and loosening the brass nuts. AWS/DVS standardsallow a maximum tolerance of 10% of the wall thickness to be misaligned. Afteralignment is verified, move the pipe ends apart.9. Initial HeatingA. Check temperature setting of the heating element(see welding parameters). A heat stick orpyrometer should be used to verify temperature.Once the heater is at the proper temperature, placethe heating element between the pipe ends, so thatit rests by the heater plate ears on the shafts.B. Using the control lever on the hydraulic unit, bringthe pipe ends against the heater applying theproper weld pressure (see charts at the end of thismanual for proper welding pressures).C. Watch for a continuous bead to form around bothpipe ends (see pipe manufacturer or AWS/DVSstandards for size). Bead must be formed 360°around each pipe.D. Lower hydraulic pressure by either carefully movingthe lever or by turning the pressure control valve ina counter clockwise motion.⇒Note: If the control lever is moved too far in this direction, the motor will activate and the carrier will open, moving the pipe away from the heater causing a badweld.10. Heat SoakA. With the pressure almost at zero, begin to time the heat soak process (see weldingparameters). It is important that the pipe ends remain in full contact with theheating element.11. Change Over TimeA. With the hydraulic unit, move the pipe ends apart. Remove the heating elementand then bring the pipe ends back together.B. Bring the hydraulic pressure back to the original weld pressure. Do not overpressurize, as this will cause a bad weld. These steps must be performed withinthe allowable change over time (see parameters at the end of the manual forproper time).C. In the event that there is hydraulic pressure loss during the weld process, activatethe hydraulic unit to bring the pressure back to the weld parameter as noted in theweld chart.12. Cooling TimeA. Keep the machine under pressure until the cooling timehas expired.B.For PP and HDPE, cooling time can be reduced by 50%under the following conditions:I. Prefabrication under workshop conditionsII. Low additional pressure when unclampingIII. No additional pressure during further cooldownIV. System will not see pressure until cool down is completeSection IV - Welding ParametersWeld parameters are located on a separate document. All rented or purchased tools will include a physical copy of the latest weld parameters.Parameters can also be accessed in the following ways:A. Located on our website at under the resourcestab of each product page.B. Through Asahi/America’s welding web app at https://myasahi.asahi-/welding or scan the QR code on the right.How to scan the QR code:1. Most phones now have the native capability to scan QR codes using the camera on thephone, with no additional QR app required. If you’re having trouble with this, there aremultiple free QR reader apps available wherever you download your apps.2. Open up the camera app on your phone or tablet.3. Hover the camera over the QR code (without taking a photo); focus the camera ifneeded.4. Wait for a web address pop-up to appear. Click on the pop-up to take you the weldparameter app.How to use the weld web app:1. To search for a parameter, fill out all four fields: tool, piping system, product line & material, and pipe size from the drop-down options. Then, click ‘search’.2. The appropriate parameters will appear. Click the ‘start’ and ‘reset’ buttons to use the timer. To search for a different parameter, click ‘search’ in the upper left corner.Section V - MaintenanceTo keep the machine in good working condition, the following should be observed:1. Keep the hardened chrome guide shafts free of dirt.2. Assure that the machine is always connected to proper power supply.3. Keep heating element clean. Whenever necessary, wipe residue off with clean, lint-freecloth while the element is at operating temperature.4. Keep sufficient oil in the hydraulic tank in order not to damage the pump. Always usehigh quality hydraulic oil, commonly used in tractors and construction equipment.5. All hydraulic quick couplings need to be kept free of dirt by keeping the protective caps inplace at all times.6. Assure that blades are sharp at all times. The blade design allows for reversal to use bothsides. If necessary, replace blades.7. For a long service life, clean and grease the threaded spindles and the joint parts regularly,which are used for clamping the pipe.8. Asahi/America recommends maintenance work after one year for contractor-owned tools.TOOL DEPARTMENT CONTACTSEquipment RentalRental Equipment Manager781-388-4618*****************************Rental Administration, Billing & Returns781-388-4623****************************Field Technician/Onsite TrainingField Training617-480-7071**********************Technical ServiceHigh Purity, Double Wall or Industrial Piping781-321-5409**********************Asahi/America Corporate HeadquartersAsahi/America, Inc.655 Andover St.Lawrence, MA 01843800-343-3618***********************PAGE LEFT INTENTIONALLY BLANK.Tel: 781-321-5409 ● Fax: 800-787-6861 ● Toll Free: 800-343-3618 ● asahi@asahi Direct Sales: East 800-232-7244 / Central 800-442-7244 / West: 800-282-7244。

Keysight 16089A, B, C, D 金值全尺寸接线片操作和维护手册说明书

16089C16089A16089B16089C16089A 16089B16089DKeysight 16089A, B, C, D Kelvin/Alligator Clip LeadsOperation andService ManualNotices© Keysight Technologies 1991-2015 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Keysight Technologies as governed by United States and international copyright laws.Manual Printing HistoryThe manual’s printing date and part number indicate its current edition. The printing date changes when a new edition is printed (minor corrections and updates that are incorporated at reprint do not cause the date to change). The manual part number changes when extensive technical changes are incorporated. November 1991 Edition 1 January 2000 Edition 2April 2001 Edition 3November 2002 Edition 4July 2010 Edition 5 (part number: 16089-90020)May 2015 Edition 6 (part number: 16089-90030)Manual Part Number16089-90030EditionEdition 6, May 2015Printed in MalaysiaPublished byKeysight TechnologiesInternational Japan G.K,1-3-3 Higashikawasaki-choChuo-kuKobe-shi, Hyogo, JapanWarrantyTHE MATERIAL CONTAINED IN THISDOCUMENT IS PROVIDED “AS IS,”AND IS SUBJECT TO BEINGCHANGED, WITHOUT NOTICE, INFUTURE EDITIONS. FURTHER, TO THEMAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, KEYSIGHTDISCLAIMS ALL WARRANTIES,EITHER EXPRESS OR IMPLIED WITHREGARD TO THIS MANUAL AND ANYINFORMATION CONTAINED HEREIN,INCLUDING BUT NOT LIMITED TO THEIMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESSFOR A PARTICULAR PURPOSE.KEYSIGHT SHALL NOT BE LIABLE FORERRORS OR FOR INCIDENTAL ORCONSEQUENTIAL DAMAGES INCONNECTION WITH THEFURNISHING, USE, ORPERFORMANCE OF THIS DOCUMENTOR ANY INFORMATION CONTAINEDHEREIN. SHOULD KEYSIGHT AND THEUSER HAVE A SEPARATE WRITTENAGREEMENT WITH WARRANTYTERMS COVERING THE MATERIAL INTHIS DOCUMENT THAT CONFLICTWITH THESE TERMS, THE WARRANTYTERMS IN THE SEPARATEAGREEMENT WILL CONTROL.Technology LicensesThe hardware and/or softwaredescribed in this document arefurnished under a license and may beused or copied only in accordancewith the terms of such license.Restricted Rights LegendIf software is for use in theperformance of a U.S. Governmentprime contract or subcontract,Software is delivered and licensed as“Commercial computer software” asdefined in DFAR 252.227-7014 (June1995), or as a “commercial item” asdefined in FAR 2.101(a) or as“Restricted computer software” asdefined in FAR 52.227-19 (June 1987)or any equivalent agency regulation orcontract clause. Use, duplication ordisclosure of Software is subject toKeysight Technologies’ standardcommercial license terms, andnon-DOD Departments and Agenciesof the U.S. Government will receive nogreater than Restricted Rights asdefined in FAR 52.227-19(c)(1-2)(June 1987). U.S. Government userswill receive no greater than LimitedRights as defined in FAR 52.227-14(June 1987) or DFAR 252.227-7015(b)(2) (November 1995), as applicablein any technical data.Safety NoticesCAUTIONA CAUTION notice denotes a hazard. Itcalls attention to an operatingprocedure, practice, or the like that, ifnot correctly performed or adhered to,could result in damage to the productor loss of important data. Do notproceed beyond a CAUTION noticeuntil the indicated conditions are fullyunderstood and met.WARNINGA WARNING notice denotes a hazard.It calls attention to an operatingprocedure, practice, or the like that, ifnot correctly performed or adhered to,could result in personal injury ordeath. Do not proceed beyond aWARNING notice until the indicatedconditions are fully understood andmet.Safety SummaryThe following general safety precautions must be observed during all phases ofoperation, service, and repair of this instrument. Failure to comply with theseprecautions or with specific WARNINGS given elsewhere in this manual mayimpair the protection provided by the equipment. Such noncompliance wouldalso violate safety standards of design, manufacture, and intended use of theinstrument. Keysight Technologies assumes no liability for the customer’sfailure to comply with these precautions.• DO NOT Operate In An Explosive AtmosphereDo not operate the instrument in the presence of inflammable gasses or fumes.Operation of any electrical instrument in such an environment constitutes asafety hazard.• Keep Away from Live CircuitsOperating personnel must not remove instrument covers. Componentreplacement and internal adjustments must be made by qualified maintenancepersonnel. Do not replace components with the power cable connected. Undercertain conditions, dangerous voltage levels may remain even after the powercable has been disconnected. To avoid injuries, always disconnect the powerand discharge circuits before touching them.• DO NOT Service or Adjust the Instrument AloneDo not attempt internal service or adjustment unless another person, capableof rendering first aid and resuscitation, is present.• DO NOT Substitute Parts or Modify the Instrument.To avoid the danger of introducing additional hazards, do not install substituteparts or perform unauthorized modifications to the instrument. Return theinstrument to a Keysight Technologies Sales and Service Office for service andrepair to ensure that safety features are maintained in operational condition.• Dangerous Procedure Warnings.Warning, such as the example below, precede potentially dangerousprocedures throughput this manual. Instructions contained in the warningsmust be followed.WARNING Dangerous voltages level, capable of causing death, are present in this instrument. Use extreme caution when handling, testing, and adjusting this instrument.CertificationKeysight Technologies certifies that this product met its publishedspecifications at the time of shipment from the factory. Keysight Technologiesfurther certifies that its calibration measurements are traceable to the UnitedStates National Institute of Standards and Technology, to the extent allowed bythe Institution’s calibration facility, or to the calibration facilities of otherInternational Standards Organization members.WarrantyThis Keysight Technologies instrument product is warranted against defects inmaterial and workmanship for a period of one year from the date of shipment,except that in the case of certain components listed in InstrumentSpecifications of this manual, the warranty shall be for the specified period.During the warranty period, Keysight Technologies will, at its option, eitherrepair or replace products which prove to be defective.For warranty service or repair, this product must be returned to a service facilitydesignated by Keysight Technologies. The Buyer shall prepay shipping chargesto Keysight Technologies and Keysight Technologies shall pay shippingcharges to return the product to the Buyer. However, the Buyer shall pay allshipping charges, duties, and taxes for products returned to KeysightTechnologies from another country.Keysight Technologies warrants that its software and firmware designated byKeysight Technologies for use with an instrument will execute its programminginstruction when property installed on that instrument. Keysight Technologiesdoes not warrant that the operation of the instrument, or software, or firmwarewill be uninterrupted or error free.Limitation of WarrantyThe foregoing warranty shall not apply to defects resulting from improper orinadequate maintenance by the Buyer, Buyer- supplied software or interfacing,unauthorized modification or misuse, operation outside of the environmentalspecifications for the product, or improper site preparation or maintenance.No other warranty is expressed or implied. Keysight Technologies specificallydisclaims the implied warranties of merchantability and fitness for a particularpurpose.Exclusive RemediesThe remedies provided herein are Buyer’s sole and exclusive remedies. KeysightTechnologies shall not be liable for any direct, indirect, special, incidental, orconsequential damages, whether based on contract, tort, or any other legaltheory.AssistanceProduct maintenance agreements and other customer assistance agreementsare available for Keysight Technologies products.For any assistance, contact your nearest Keysight Technologies Sales andService Office.Safety SymbolsGeneral definitions of safety symbols used on the instrument or in manuals.Instruction Manual symbol: the product is marked with this symbolwhen it is necessary for the user to refer to the instrument manual inorder to protect against damage to the instrument.Alternating current.Direct current.On (Supply).Off (Supply).In-position of push-button switch.Out-position of push-button switch.A chassis terminal: a connection to the instrument’s chassis, whichincludes all exposed metal structure.Standby.Contents 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General InformationIntroduction 9Using the 16089A, B, C, D 9Product Description 10Accessories Supplied 10Operating and Safety Precautions 11Operating 11Service 11Specifications 12Common Specifications for the 16089A, B, C, D 12Specifications for the 16089A, B, C 12Specifications for the 16089D 12Supplemental Performance Characteristics 13Supplemental Performance Characteristics of 16089A 13Supplemental Performance Characteristics of 16089B 13Supplemental Performance Characteristics of 16089C 13Supplemental Performance Characteristics of 16089D 132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation for UseIntroduction 15Initial Inspection 15Ambient Environmental Considerations 20Operating and Storage 20Connecting the Test Leads for Use 20Packaging the Test Leads 203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OperationIntroduction 21Test Leads Features 2116089A, B, C 2116089D 22OPEN and SHORT Compensation 23ContentsOperation 244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ServiceIntroduction 25Replaceable Parts 2516089A Replaceable Parts 2616089B Replaceable Parts 2616089C Replaceable Parts 2716089D Replaceable Parts 28Introduction16089A, B, C, D Operation and Service Manual1General InformationIntroductionThe purpose of this manual is to enable you to use your Keysight 16089A, B, C,Kelvin Clip Leads and Keysight 16089D Alligator Clip Leads efficiently andconfidently. This manual contains both general and specific information. Touse the 16089A, B, C, D to perform a specific function (without having to readthe entire manual), follow the directions in "Using the 16089A, B, C, D". Using the 16089A, B, C, DThe 16089A, B, C, D has been designed to operate specifically with the LCRMeter.•To install the 16089A, B, C, D, turn to Chapter 2.•To operate the 16089A, B, C, D, turn to Chapter 3.•To order replaceable parts for the 16089A, B, C, D, turn to "ReplaceableParts" in Chapter 4.Product DescriptionProduct DescriptionThe 16089A, B, C, D has been designed to operate specifically with thefollowing four-terminal-pair type LCR meters and impedance analyzers.The 16089A, B, C, D make it possible to measure odd-shaped components thatcannot be measured with conventional test fixtures. The 16089A, 16089B, and16089C consist of a direct attachment, four-terminal-pair type test leads thatare equipped with two insulated Kelvin clips. Three sizes of Kelvin clips areprovided. The 16089A Kelvin Clip Leads is equipped with two large Kelvin clips,the 16089B Kelvin Clip Leads is equipped with middle size clips and the16089C Kelvin Clip Leads is equipped with small size clips. The 16089D consistof a direct attachment, four-terminal-pair type test leads that are equippedwith four alligator clips.Accessories SuppliedThe following accessories are supplied with the 16089A, B, C, D:Table 1-1 Furnished AccessoriesDescription Part Number QuantityOperation and Service Manual This manual1Operating and Safety PrecautionsOperating and Safety PrecautionsOperatingYou need to observe only normal precautions in handling and operating the16089A, B, C, D. Do not exceed the operating input power, voltage, andcurrent level and signal type appropriate for the instrument being used, refer toyour instrument's operation manual.CAUTION Electrostatic discharge (ESD) can damage the highly sensitive microcircuits in yourinstrument. ESD damage is most likely to occur as the test leads are being connected ordisconnected. Protect them from ESD damage by wearing a grounding strap that providesa high resistance path to ground. Alternatively, ground yourself to discharge any staticcharge built-up by touching the outer shell of any grounded instrument chassis beforetouching the test port connectors.Never touch the test clip contacts.Use a work station equipped with an anti-static work surface.ServiceThe voltage levels found in these test leads when used with the intendedinstruments do not warrant more than normal safety precautions for operatorsafety. Nevertheless, service should be performed only by qualified personnel.SpecificationsSpecificationsThis section lists the complete 16089A, B, C, D specifications. Thesespecifications are the performance standards and limits against which the 16089A, B, C, D is tested. When shipped from the factory, the 16089A, B, C, D meets the following specifications:Common Specifications for the 16089A, B, C, DSpecifications for the 16089A, B, CSpecifications for the 16089DMaximum dc Bias Voltage ±42V peak max Frequency Range 5 Hz to 100 kHz Operating Temperature 0 to 55°COperating Humidity ≤95% RH (@40°C) Non-operating Temperature – 40 to 70°C Non-operating Humidity ≤95% RH (@40°C)Weight300 gCable length0.94mCable length1.3mSupplemental Performance CharacteristicsThis section gives supplemental performance characteristics. Supplemental performance characteristics are not specifications, but are typical characteristics included as additional information for the operator. Supplemental performance characteristics are not guaranteed.Supplemental Performance Characteristics of 16089ASupplemental Performance Characteristics of 16089BSupplemental Performance Characteristics of 16089CSupplemental Performance Characteristics of 16089DApplicable DUT sizeDiameter of DUT’s terminals≤15mmApplicable DUT sizeDiameter of DUT’s terminals ≤7.9mm Length of DUT’s terminals≥3mmApplicable DUT sizeDiameter of DUT’s terminals ≤1mm Space between DUT’s terminals ≥2mm Length of DUT’s terminals≥2mmApplicable DUT sizeDiameter of DUT’s terminals≤5mmIntroduction16089A, B, C, D Operation and Service Manual2Preparation for UseIntroductionThis chapter explains how to install the Keysight 16089A, B, C Kelvin ClipLeads and Keysight 16089D Alligator Clip Leads. The topics covered includeinitial inspection, ambient environmental considerations, connecting the testleads for use, and repackaging the test leads for shipment.Initial InspectionThese test leads have been carefully inspected electrically and mechanicallybefore being shipped from the factory. They should be in perfect physicalcondition, no scratches, dents or the like. They should also be in perfectelectrical condition. Verify this by carefully performing an incoming inspectionto check the test lead set for signs of physical damage and missing contents.Ifany discrepancy is found, notify the carrier and Keysight Technologies. YourKeysight Technologies sales office will arrange for repair and replacementwithout waiting for the claim to be settled•Inspect the shipping container for damage. Keep the shipping materialsuntil the inspection is completed.•Verify that the shipping container contains everything shown in Figure 2-1, Figure 2-2, Figure 2-3, and Figure 2-4 and listed in Table 2-1, Table 2-2,Table 2-3, and Table 2-4•Inspect the exterior of the 16089A, B, C, D for any signs of damage.16089AFigure 2-116089A Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-1.Table 2-1 Contents of 16089A Description Keysight Part Number QuantityKelvin Clip Leads16089-6000111Operation and Service Manual 216089-900301.16089BFigure 2-216089B Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-2.Table 2-2 Contents of 16089B Description Keysight Part Number QuantityKelvin Clip Leads16089-6000211Operation and Service Manual 216089-90030116089CFigure 2-316089C Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-3.Table 2-3 Contents of 16089C Description Keysight Part Number QuantityKelvin Clip Leads16089-6000311Operation and Service Manual 216089-900301Initial Inspection16089DFigure 2-416089D Product Overview1 Keysight internal-only part number.2 Operation and Service Manual is not shown in Figure 2-4.Table 2-4 Contents of 16089D Description Keysight Part Number QuantityKelvin Clip Leads16089-6000411Operation and Service Manual 216089-900301.Ambient Environmental ConsiderationsAmbient Environmental ConsiderationsOperating and StorageThe 16089A, B, C, D must be operated within an ambient temperature range of0°C to 55°C and relative humidity up to 95% at 40°C (non-condensing).The 16089A, B, C, D may be stored within a temperature range of -40°C to+70°C, and at a relative humidity of up to 95% at +40°C (non-condensing). Connecting the Test Leads for UseFigure 2-5 Connecting the Test LeadsPackaging the Test LeadsIf shipment to a Keysight Technologies service center is required, each testlead set should be repackaged using the original factory packaging materials.Alternatively, comparable packaging materials may be used. Wrap the testleads in heavy paper and pack in anti-static plastic packing material. Usesufficient shock absorbing material on all sides of the 16089A, B, C, D toprovide a thick, firm cushion and to prevent movement. Seal the shippingcontainer securely and mark it FRAGILE..Introduction16089A, B, C, D Operation and Service Manual3OperationIntroductionThis chapter describes using the test leads and compensation techniques forthese test leads.Test Leads Features16089A, B, CFigure 3-1 16089A, B, C Test Leads Features1.Kelvin Clips. These are connected to the DUT.2.Four-terminal-pair BNC terminals. These terminals are connected to theUNKNOWN terminals of your measurement instrument.Test Leads Features16089DFigure 3-2 16089D Test Leads Features1.Alligator Clips (red). These are connected to the high terminal of the DUT.2.Alligator Clips (black). These are connected to the low terminal of the DUT.3.V markers. These show the H pot and L pot terminals.4.Four-terminal-pair BNC terminals. These terminals are connected to theUNKNOWN terminals of your instrument.OPEN and SHORT CompensationThe 16089A, B, C, D have inherent stray capacitance, residual inductance, andresidual resistance that affect the measurement. To cancel the effects causedby these residuals and thus minimize their effect on measurement accuracy,the measurement instrument's OPEN and SHORT compensation capabilitiesmust be used. The procedures are described in the measurement instrument'soperation manual.Figure 3-3 Making a Short Condition for the 16089B and 16089CWhen you perform SHORT compensation for the 16089A or 16089D, use thefurnished short bar as shown in Figure 3-4.Figure 3-4 Making a Short Condition for the 16089A and 16089DNOTE If the furnished short bar of 16089A or 16089D is corroded, worn or damaged, reverse the position or replace it with a new short bar. To reverse the short bar, remove the 2 screwsthat fixes the short bar and reverse the position.OperationStep-by-step instructions on how to make a measurement with the 16089A, B,C, D are:1.Set the Cable Length setting according to the LCR meter/ ImpedanceAnalyzer operation manuals.2.Connect the test leads of 16089A, B, C, D to the measurement instrument'sUNKNOWN terminals.3.Perform OPEN and SHORT compensation as described in the measurementinstrument's operation manual. Figure 3-3 and Figure 3-4 show how tomake short condition for the SHORT compensation.4.Connect the component to be tested into the test clips.NOTE When 16089D is used, connect the test clips to the DUT correctly as follows:•Connect all test clips to the DUT.•Connect the same color test clips to the same terminal of the DUT.•Connect the H pot and L pot clips (marked “V") closer to the DUT than H cur and L cur clips.Figure 3-5 also shows how to connect a DUT using the alligator clips of the16089D. Figure 3-5 Connecting the DUT to the16089DIntroduction16089A, B, C, D Operation and Service Manual4ServiceIntroductionThis chapter gives replaceable parts information for the 16089A, 16089B,16089C and 16089D.Replaceable PartsTable 4-1,Table 4-2, Table 4-3 and Table 4-4 list the replaceable parts for the16089A, B, C, and D, respectively. Figure 4-1 shows the connection from thecable to the clip assembly of the 16089C. The parts listed can be ordered fromyour nearest Keysight Technologies office. Ordering information should includethe Keysight part number and the quantity required.1 The whole unit. Keysight internal-only part.Red and orange cables are screwed on the one Kelvin clip assembly. Gray and black cables are screwed on the other Kelvin clip assembly. Orange and gray cables are marked “V”.16089B Replaceable Parts1 The whole unit. Keysight internal-only part.On one Kelvin clip, the orange cable is screwed on the “V” marked side, and the red cable is screwed on the non-marked side. On the other Kelvin clip, the gray cable is screwed on the “V” marked side, and the black cable is screwed on the non-marked side.Table 4-116089A Replaceable Parts Keysight Part Number Quantity Description16089-600011Test Leads 116089-040011Cover Top0515-09142Screw Flat Head M3X0.5 L616089-600112Large Clip Assembly 7121-26962Wire Marker “V”16089-012011Short Bar 0515-15502ScrewTable 4-216089B Replaceable Parts Keysight Part Number Quantity Description16089-600021Test Leads 116089-040021Cover Top0515-09142Screw Flat Head M3X0.5 L616005-600102Kelvin Clip Assembly.* Corresponding to designator in Figure 4-1.1 The whole unit. Keysight internal-only part.Connection from the cables to the Kelvin clip is shown in Figure 4-1.Figure 4-1Kelvin Clip ConnectionsTable 4-316089C Replaceable PartsReference Designator*Keysight Part Number Quantity Description16089-600031Test Lead 116089-040031Cover Top0515-09142Screw Flat Head M3X0.5 L6116005-600131Test Clip Assembly Red 16005-600151Test Clip Assembly Black 20890-1809 2 cm Tube Heat Shrinkable Red 0890-18082 cmTube Heat Shrinkable Black1 The whole unit. Keysight internal-only part.Table 4-5 shows the correspondence between the Alligator Clips and the Cables.Table 4-416089D Replaceable Parts Keysight Part Number Quantity Description16089-600041Test Leads 116089-040041Cover Top0515-09142Screw Flat Head M3X0.5 L60340-10852Insulator Alligator Clip Red 0340-10861Insulator Alligator Clip Black 1400-12524Alligator Clip 7121-26962Wire Marker “V”16089-012011Short Bar 0515-15502ScrewTable 4-5Clip and Cable Correspondence Alligator Clip Color Cable Color Marker Red Orange “V”Red Red Black Gray “V”BlackBlackThis information is subject to change without notice.© Keysight Technologies 1991, 2000, 2001, 2002, 2010, 2015Edition 6, May 2015*16089-90030*16089C16089A16089B16089C16089A 16089B16089D。

2007年GA132 零件手册ASL 1092083000ed02

Atlas Copco Stationary Air CompressorsNo. 1092 0830 00Ed:02Registration code : APC GA ≥90 / 39 / 9882007-09GA90 - GA110 - GA132 - GA160GA90 W - GA110 W - GA132 W - GA160 W•Copyright 2004, Atlas Copco Airpower n.v., Antwerp, Belgium.Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.•Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.Parts list1092 0830 00231092 0830 001092 0830 00 41092 0830 005Part number Qty Name Remarks 2989 0122 001Service stage1619 6032 001Nipple1)621 5011 00 1Gasket0101 1626 002Pin0147 1380 0318Bolt1616 5735 001Drive shaft Ref.Part number Qty Name Remarks 21302Grating1614 6611 002)3)4)5)1614 9372 006)1614 9371 007)1Gearcasing assembly 1614 4882 80GA90-110(W)1092 0830 006403071092 0830 001092 0830 0081092 0830 00961379_02101092 0830 001092 0830 00111092 0830 00131092 0830 00141092 0830 001561204_02161092 0830 001092 0830 00171092 0830 00181092 0830 00191092 0830 00201092 0830 00211092 0830 00221092 0830 00231092 0830 00241092 0830 00251092 0830 00261092 0830 00271092 0830 00281092 0830 002911 2834 1156 710 9 A13161092 0830 0030Parts list13tube-shell coolers GA90-110W13 Coolers GA90-110 W2Ref. Part number Qty NAME RemarkRef. Part number Qty NAME Remark 1 1621232800 1 PIPE 10 1621485900 1 HOSE ASSEMBLY 2 1092000579 1 PIPE11 1621485800 1 HOSE ASSEMBLY0663210620 1 O-RING0663210611 2 O-RING0147140203 4 BOLT 0147140103 4 BOLT0301235800 4 WASHERMounted tocooler0301235800 4 WASHER Mounted to cooler Hose with code: 10# is same 3 1621209408 1 AFTERCOOLR #1 12 1621205600 1 support 1614663200 1 PLATE 1619533501 8 BOLT Mounted to frame 0147140703 2 BOLT 0147136003 8 BOLT0301235800 4 WASHER 0301234400 8 WASHERMount cooler 0266211200 2 NUT 13 1621209600 1 SUPPORT0663210612 2 O-RINGMounted tocoolers1619533501 4 BOLT Mounted to support 4 1614866108 1 OIL COOLER #1 14 1092000580 1 PIPE 5 1621206100 1 PIPE 0663210620 1 O-RING 6 1619615308 1 BALL V ALVE 0147140203 4 BOLT 7 1621206200 1 PIPE 0301235800 4 WASHERMounted to coolers0663210612 1 O-RING 15 PIPE 0147140703 2 BOLT 1621206300 1 GA90-110W FF 0301235800 4 WASHER 0634100085 1 Victaulic coupling 0266211200 2 NUT Mounted to cooler; pipe with code: 9# is identical 0586100030 1 UNION Pipe joint; Pipe with code:9# is identical 8 1621206000 1 PIPE 16 PIPE 9 16212064001PIPE 1621206500 1 GA90-110W FFNOTE: #1) use O-RING: 1092014700; Qty:421543867910 111213161514Ref. Part number Qty NAME Remark Ref Part number Qty NAME Remark 1 1621484700 1 PIPE8 PIPE 0147140503 4 BOLT 1621204200 1 GA132-160W FF 0301235800 4 WASHER 0634100085 1 Victaulic coupling 0266211200 4 NUT 0586100030 1 UNION Pipe joint; Pipe withcode:9# is identical 0663210612 2 O-RING Coolers joint9 PIPE2 1621485008 2 OIL COOLER #1 1621204500 1 GA132-160W FF1614663200 1 PLATE 101619615308 1 BALL V ALVE 0147140503 2 BOLT 111621204300 1 PIPE0301234400 2 WASHER 121621204600 1 PIPE0266211200 2 NUT 131621493200 1 SUPPORT 0663210612 1 O-RING mount coolers 0147136003 8 BOLT3 1621204700 1 PIPE 0301234400 8 WASHERMount cooler0663210620 1 O-RING 1619533501 8 BOLT Mounted to frame0147140203 4 BOLT 141614663400 1 PIPE0301235800 4 WASHERmounted to cooler 0663210611 2 O-RING Mounted to cooler4 1621205008 1 AFTERCOOLR#1 0147140203 4 BOLT 5 1621484800 1 PIPE 0301234400 4 WASHER 6 1621204400 1 PIPE 15 1621203900 1 HOSE ASSEMBLY0663210612 1 O-RING 161621204000 1 HOSE ASSEMBLY0147140703 2 BOLT 0663210611 2 O-RING0301235800 4 WASHER 0147140103 4 BOLT 0266211200 2 NUT mounted to cooler;pipe with code: 5#is identical0301235800 4 WASHER7 1621204800 1PIPEMounted to cooler; pipe with code:15# is identicalNOTE: #1) use O-RING: 1092014700; Qty.:461391_0461395_091761243_06Ref.Part number Qty Name Remarks 10100661 1000 251Seal washer10150581 0000 451Pipe coupling 10300070 6002 06 AR Plastic tube10350581 0000 861Pipe coupling 10400653 1124 001Flat gasket10450581 0000 531Pipe coupling 10500653 1062 001Flat gasket10550581 0000 451Pipe coupling 10700070 6002 06 AR Plastic tube Ref.Part number Qty Name Remarks 10721621 1091 003Clamp10750581 0000 861Pipe coupling 10800653 1124 001Flat gasket10850581 0000 531Pipe coupling 10900852 0010 331Ball valve20050070 6002 06 AR Plastic tube20100347 6102 001Hose clip20150581 0000 861Pipe coupling 20200661 1000 271Seal washer20250581 0000 531Pipe coupling61245_06Ref.Part number Qty Name Remarks10550070 6002 13 AR Plastic tube 10600581 1200 381Pipe coupling 10650661 1000 251Seal washer 10701613 8084 001Pipe coupling 10750070 6002 05 AR Plastic tube 10800581 1200 231Elbow10850581 0001 041Pipe coupling 10900070 6002 13 AR Plastic tube 10921621 1091 002Clamp10950581 0000 861Pipe coupling 11000661 1000 271Seal washer 11050581 0000 711Pipe couplingRef.Part number Qty Name Remarks10051Drain valve 8102 0425 80230V 50-60Hz 8102 0425 98110V 50-60Hz 10101617 1768 001Support 10150301 2335 003Washer 10200147 1323 033Bolt10250661 1000 291Seal washer 10300605 8700 841Bushing 10350661 1000 291Seal washer 10400605 8820 051Bushing 10450661 1000 271Seal washerGA90(W), GA110(W)10501Pipe coupling0581 0000 71GA90(W), GA110(W)0581 1200 38GA132(W), GA160(W)61244_0621。

阿特拉斯空压机(INSTRUCTION)

阿特拉斯·科普柯固定式空气压缩机
GA90 - GA110 - GA132 - GA160 - GA200 - GA250 - GA315 GA90 W - GA110 W - GA132 W - GA160 W - GA200 W GA250 W - GA315 W
使用说明书
重要提示
1. 对GA/GA W 90到 160, 从系列号 AIF-078 300开始使用 . 2. 对GA/GA W 200 到 315, 从系列号 AIF-078 302开始使用 . 3. 该书必须和 " GA-GR-ZA-ZE-ZR-ZT Elektronikon® 电脑控制器使用手册”联合使用。
1.3 Elektronikon® 控制系统 . . . . . . . . . . . . . . . . . . . . . . . 10 1.3.1 自动控制空压机 . . . . . . . . . . . . . . . . . . . . . . . 10 1.3.2 保护空压机 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.3.3 维修报警 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.3.4 断电后自动重新起动 . . . . . . . . . . . . . . . . . . . 11 1.3.5 允许起动 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2 安装 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.1 尺寸图 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2.2 安装建议 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.3 电缆的规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 2.4 图标 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2.5 冷却水的要求 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 2.5.1 冷却系统的类型 . . . . . . . . . . . . . . . . . . . . . . . 28 2.5.2 冷却水的参数 . . . . . . . . . . . . . . . . . . . . . . . . . 29

s6-150(90)维修手册

4 2.20 1.89 1.50 1.36
5 1.50 1.31 1.00 1.00
6 1.00 1.00 0.81 0.74
R 8.30 6.43 6.48 5.87
重量 (Kg)
225
润滑油容量 (L)
13.0
润滑油级别:
GL－4/5 SAE 80W
安装方式:
右卧或左卧或立式
QJ1506
(打出换档滚针轴承）
变速器总成的装配
中间轴总成的装配二轴总成的装配缓速器支架总成的装配
主要零件的加热温度
中间轴齿轮………………160º～180°C 五档轴承座圈………………100º～120°C 同步齿座…………………….85º～100ºC 轴承……………………………85º～100ºC
ZF-BK型同步器分解图
ZF-D型同步器
ZF-D型双锥面同步器分解图
同步器间隙检测
注意：装配前，用塞尺检查同步锥毂与同步环之间的磨损间隙。在两点相反方向至少检查两点检测，间隙要求大于0.8mm.
1.塞尺 2.间隙大于0.8mm 3.同步环 4.同步锥毂
变速器总成分解图
壳体及附件分解
前端盖分解图
1.装同步外环 2.装加热的齿座(100º~120ºC)
二轴总成的装配
（ZF-D型双锥面同步器）
1. 装同步块 2. 装齿毂
二轴总成的装配
（一档齿轮）
1. 装一档滚针轴承和一档齿轮. 2. 将加热至120°C的倒档齿座装到轴上，台阶朝法兰方向
二轴总成的装配
将加热至100°-120°C的倒档座圈装到轴上.
二轴总成的装配
1.反转二轴180°，装三档滚针轴承、齿轮及同步锥毂、同步环。 2.加热三/四档齿座至100º~120°c注意装配方向，选装卡簧满足0-0.1mm。

Cascade Carton Clamp 30E 零件手册说明书

Parts Manual cFor Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234Carton Clamp 30E-CCS-142ModelSerial Number cascadeாcorporationPublications30EPART NO.DESCRIPTIONParts Manual 215204Service Manual 210273Operator’s Guide212116Installation Instructions 679929Tool Catalog673964Literature Index Order FormBase Unit GroupREF QTY PART NO.DESCRIPTION217495Base Unit Group14210117Cylinder v24217001T-Bar328211689Capscrew, M12 x 30 GR 10.9 44209741Rod End q58768303Capscrew, M10 x 35 q68210490Retainer Half Ring q71216997Baseplate – LH81216998Baseplate – RHv See Cylinder page for parts breakdown.q Included in Cylinder Rod Anchor Kit 213856. Reference: SK-6089.REF QTY PART NO.DESCRIPTION94210489Rod End Anchor q108213735Bearing Spacer114210140Bearing Retainer124787375Capscrew, M8 x 20131212500Bumper144209120Bearing154209119Bearing168211128Capscrew, M16 x 30 GR 10.9213856Service Kit30ECylinderREF QTY PART NO.DESCRIPTION210117Cylinder Assembly 11210118Cylinder/Shell214157-820Rod31213783Cap48768208Capscrew, M8 x 2551209809Bearing v61787375Capscrew, M8 x 2071212452Retainerv Included in Service Kit 210090.Reference: S-4644, S-4643.REF QTY PART NO.DESCRIPTION82210053O-Ring v92210050Back-Up Ring v 101212477Seal v111209808Seal v122214053O-Ring v131562131Wiper v210090Service KitCYLINDERASSEMBLYPART NUMBER30EHydraulic Group STAMPEDVALVEASSEMBLYv See Valve page for parts breakdown,part number stamped on valve.Reference: SK-6090.ValveSideshifting Without RegenerationREF QTY PART NO.DESCRIPTION215873Valve Assembly11215874Valve Body21214405Crossover Relief Valve35682170Seal Kit ▲41210266Flow Divider/Combiner51679992Seal Kit ▲62209847Check Valve73215756Piston816025134Check Valve93604511Fitting, 6-6 ●101605743Fitting, 6-6 ●115604510Fitting, 6121215876Crossover Relief Valve210452Valve Service Kit▲Included in Valve Service Kit 210452.●Included in Fitting Group 212978.Arms and PadsREF QTY PART NO.DESCRIPTION82210154Spring94203405Capscrew, M10 x 16 104210161Pin114787372Capscrew, M8 x 20 124682999Eye Pin1310675620Washer, M10 148200590BushingReference: 3009642, 210495.REF QTY PART NO.DESCRIPTION1512766646Capscrew, M10 x 20 1612768706Capscrew, M12 x 35 1712683170Nut, M1218v673841Contact Pad Repair Kit 191675626Bushing Driver Tool 204787398Washer, M8214217492Shim Kitv Repairs one hole.Common Parts 30EREF QTY PART NO.DESCRIPTION116006345Contact Pad – LH 53.9 in. Wide x 52 in. High 216006346Contact Pad – RH 53.9 in. Wide x 52 in. High 31214401Arm – LH41221402Arm – RH513009662Stabilizer – LH613009682Stabilizer – RH72210180Filler Block – LH Upper/RH Lower 82210179Filler Block – LH Lower/RH UpperArm Bar Bumper Kit30EREF QTY PART NO.DESCRIPTION3005258Arm Bar Bumper Kit43005259Wear Strip13005260Adhesive TapeSee Arm Bar Bumper Kit Installation Instructions page.Installation InstructionscArm Bar Bumper Kit 3005258for E-Series ClampsThis sheet provides instructions on how to apply stick-on type bumper strips to E-Series Clamp arm bars.IMPORTANT: Arm bar surface must be smooth, clean and dry for pressure-sensitive contact adhesive to bond properly. Clean hands thoroughly before performing this procedure. Temperature should be above 70° F (21° C).CONTACT PAD HEIGHT30EBackrest GroupREF QTY 54 in. (1370 mm) – 4-TubeDESCRIPTION11210526Backrest L – 40 in. (1016 mm) Width 22210155Plate34211689Capscrew, M12 x 3048667910Washer, M1254206174Capscrew, M12 x 45L Backrest without Solenoid Adaption mounting.Reference: 211448 (Items 2 thru 5), S-4198, S-4265.For Technical Assistance call: 800-227-2233, Fax: 888-329-8207To Order Parts call: 888-227-2233, Fax: 888-329-0234cascadeᮋBolt-On Mounting GroupCL0236.ill30EITA II REF QTYPART NO.DESCRIPTION211162Upper Mounting Group v 211173Lower Mounting Group q 12210491Upper Hook24768577Capscrew, M20 x 3531212999Center Key42211129Capscrew, M16 x 3552675968Lower Hook64211128Capscrew, M16 x 3074211179Washer, M16v Includes items 1–4.q Includes items 4–6.Reference: SK-6089.Do you have questions you need answered right now? Call your nearest Cascade Parts Department. Visit us online at Cascade (UK) Ltd.15, Orgreave Crescent Dore House Industrial Estate HandsworthSheffield S13 9NQ EnglandTel: 742-697524FAX: 742-695121Cascade Scandinavia AB Box 124Hammarvägen 10567 23 Vaggeryd SwedenTel: 42-0-393-36950 FAX: 46-0-393-36959Cascade N.V. European Headquarters P.O. Box 30091300 El Almere Damsluisweg 561332 ED AlmereThe NetherlandsTel: 31-36-5492911 FAX: 31-36-5492964Cascade Norway Østerliveien 37A 1153 Oslo NorwayTel: 47-22-743160 FAX: 47-22-743157Cascade France S.A.R.L.1D Rue De CharaintruBP 18, 91360 Epinay-Sur-OrgeMorangis Cedex, FranceTel: 33-1- 64547500FAX: 33-1-64547501Cascade Hispania S.A.Carrer 5 Sector CZona Franca DuaneraPoligono de la Zon Franca08040 Barcelona, SpainOffice No. 256Tel: 93-264-07-30FAX: 93-264-07-31Cascade Canada Inc.5570 Timberlea Blvd.Mississauga, OntarioCanada L4W-4M6Tel: 905-629-7777FAX: 905-629-7785Cascade GmbHD-41199 MonchengladbachKlosterhofweg 52GermanyTel: 49-216-668230FAX: 49-216-6682323Cascade N.V.Benelux Sales and ServiceP.O. Box 30091300 El AlmereDamsluisweg 561332 ED AlmereThe NetherlandsTel: 31-36-5492950FAX: 31-36-5492974Cascade FinlandAlbert Petreliuksenkatu 301370 VantaaFinlandTel: 358-9-836-1925FAX: 358-9-836-1935Cascade Corporation2501 Sheridan AvenueSpringfield, OH 45505Tel:888-CASCADE (227-2233)FAX: 888-329-0234Cascade Japan Ltd.5-5-41,Torikai KamiSettsu, OsakaJapan, 566Tel: 81-726-53-3490FAX: 81-726-53-3497Cascade Korea108B, Namdong Ind Complex 658-3 Gojan-Dong Namdong-GuInchon, 405-310 KoreaTel: 82-32-821-2051FAX: 82-32-821-2055Cascade Australia1445 Ipswich RoadRocklea, QLD 4106AustraliaTel: 1-800227-223FAX: (07) 3373-7333Cascade New Zealand15 Ra Ora DriveEast Tamaki, AucklandNew ZealandTel: 9-273-9136FAX: 9-273-9137Cascade (Africa) Pty. Ltd.P.O. Box 625, Isando 160060A Steel RoadSparton, Kempton ParkSouth AfricaTel: 27-11-975-9240FAX: 27-11-394-1147Cascade-XiamenNo. 668 Yangguang Rd. Xinyang Industrial Zone Haicang, Xiamen City Fujian ProvinceP.R. China 361026 Tel: 86-592-651-2500 FAX: 86-592-651-2571Cascade (Singapore) Trading Co.Four Seasons Park Autumn Block - Apt. 1802 12 Cuscaden Walk SingaporeTel: 65-834-1935FAX: 65-834-1936cᮊ Cascade Corporation 20031-2003。

GA290X系列芯片数据手册说明书

无锡思扬微电子科技有限公司美发系列芯片数据手册 GA290X快速加热控制器（Ver1.1）概述GA290X系列芯片是专为卷发器和直发器设计的专用IC。

按下ON键，卷发器开始加热，当卷发器达到预设的温度后，卷发器停止加热并保持恒温状态。

LED1和LED2用于指示卷发器当前的工作状态，加热时，LED以2Hz的频率闪烁（闪亮型号的芯片）。

按下OFF键以后，卷发器停止加热，LED指示灯灭。

在卷发器工作的过程中，芯片持续检测NTC的状态，如果NTC断路，加热立即被停止，LED1和LED2以8Hz的频率快闪，防止温度持续升高对使用者造成伤害。

特点◆110V/220V双电压兼容；◆多模式LED指示；◆NTC断路保护；◆工频60Hz 1小时自动关机，50Hz 72分钟自动关机；◆具有自动加热及恒温控制功能；◆根据交流电源电压来调节SCR输出占空比；◆SCR驱动；◆具有单键和双键两种开关机方式；◆工作电压范围3V~5V。

应用◆卷发器◆直发器订购信息元件标号封装形式GA290XP DIP8LGA290XS SOP8L元件参数对照表元件标号 LED工作方式（加热）定时关机功能开关机控制方式GA2900 闪亮 Y 双键GA2901 常亮 Y 双键GA2902 闪亮 N 双键GA2903 常亮 N 双键GA2904 闪亮 Y 单键GA2905 常亮 Y 单键GA2906 闪亮 N 单键GA2907 常亮 N 单键管脚说明管脚名称输入/输出说明管脚序号2900/1/2/3 2904/5/6/71 NTC1 NTC1 输入 NTC电压输入，NTC断路保护2 NTC2 NTC2 输出输出信号，用于NTC断路保护检测3 CLK CLK 输入工频时钟信号输入4 GND GND - 地5 ON ON/OFF 输入开机键及LED输出；开关机键及LED输出6 GATE GATE 输出 SCR触发输出，高电平有效7 OFF LED 双向关机键及LED输出；LED输出8 VDD VDD - 电源管脚图结构功能框图芯片内部结构框图AC 110V/220V温度状态AC电压温度状态 SCR输出 LED闪烁模式低温全波输出闪亮110V恒温半波输出闪亮高温关常量低温 1/4波输出闪亮220V恒温 1/8波输出闪亮高温关常量* 1. LED的闪烁频率是1/32CLK，占空比为50%。

Cascade Corporation 推拉油门柱系列35E-PHS-160型号说明书

Parts Manual cFor Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234Push/Pull Hyd Platens35E-PHS-160ModelSerial Number cascadeாcorporationPublicationsPART NO.DESCRIPTIONParts Manual686455Service Manual684945Operators Guide685531Operators Pocket Guide684944Installation Instructions680664Servicing Cascade Cylinders-VHS 679929Tool Catalog673964Literature Index Order FormDecalsPlaten Group35EREF QTY PART NO.DESCRIPTION3008460Platen Group113008498Platen – R.H.213008501Platen – Center313008495Platen – L.H.410769583Capscrew510681467Lockwasher6x3008509Shim – .030 in. (.762 mm)7x3008510Shim – .021 in. (.533 mm)823008508Hook923008504Hook10x3008505Shim – .030 in. (.762 mm)11x3008506Shim – .021 in. (.533 mm) 1213008465Hydraulic Component Group s x Quantity as required.s See Hydraulic Components page for part breakdown.35EREF QTY PART NO.DESCRIPTION3008465Hydraulic Component Group 113008466Cylinder – L.H. x213008467Cylinder – R.H. x34617917Fitting, 4-444617641Fitting, 4-4522451Fitting, 4-462222939Fitting, 4-472763024Capscrew82679828Nut923008477Hose s1013008478Hose s1113008479Hose s1226002109Hose sx See Cylinder page for parts breakdown.s Included in Hose Group 3009543.45EREF QTY PART NO.DESCRIPTION3008466Cylinder - L.H.113008471x Piston Rod223008470x Retainer313008469x Tube412712x O-Ring52615116x Back-up Ring623008474x Nylon Ring72641332Seal823008476Washer923017Snap Ring1013008475x Platex Parts cannot be serviced.Order complete Cylinder if replacement needed.45EREF QTY PART NO.DESCRIPTION3008467Cylinder - R.H.113008471x Piston Rod223008470x Retainer313008469x Tube412712x O-Ring52615116x Back-up Ring623008474x Nylon Ring72641332Seal823008476Washer923017Snap Ring1013008475x Platex Parts cannot be serviced.Order complete Cylinder if replacement needed.Frame Group35EREF QTY PART NO.DESCRIPTION6014750Frame Group 116013400Frame 222453Fitting, 6-6323008564Stop35EREF QTY PART NO.DESCRIPTION6013645Mounting Group 116013403Anchor Bracket22671165Upper Bearing32682814Lower Bearing416002591Sideshift Cylinder I52666984Fitting, 4-662675550Restrictor72---Spacer82---Strip916012865Dowel Pin1022617Fitting, 6-6112213774Capscrew1226013090Washer1312680Fitting, 6-61412375Fitting, 6-61512453Fitting, 6-61622669Fitting, 6-41716013406Tube1816013405TubeI See Sideshift Cylinder page for parts breakdown.Sideshift Cylinder35EREF QTY PART NO.DESCRIPTION6002591Sideshift Cylinder 12218324Threaded Retainer 22562132Rod Seal32415866O-Ring42562131WiperQuick-Change Lower Hook Group ITA IIREF QTY PART NO.DESCRIPTION683179Lower Hook Group ITA II12678832Pin22675514Hook34683182Capscrew42675515Guide35E/45EREF QTY PART NO.DESCRIPTION204644Mechanism Group 11204691Arm-Inner Secondary R. H.21204692Arm-Secondary Outer R. H.34683154s Bushing4q683161Shim (.030)5q683162Shim (.060)64205070Roller7q683163Shim (.030)8q683164Shim (.060)94683155s Bushing101682821Pin11156229Washer122685661Capscrew1315682999Eye-Pin142682822Pin-Head152205065Pin166683153s Bushing17q204532Shim (.12)182204694Arm-Outer Primary 194204533Pin-Frame204204535s Bushing214204695Pin221204604Arm-Inner Primary 231204693Arm-Secondary Outer L. H. 241204690Arm-Inner Secondary L. H. 252204696Pin-Outer262682823Pin-Rod272683165Spacer2813767961Capscrewq Quantity as required.s Included in Bushing Service Kit 205075.REF QTY PART NO.DESCRIPTION582635Cylinder Assembly 11—Spacer 21562552s Seal 317348Snap Ring 41562334Piston 51562716Shell 61558626Rod 71559705s Seal 812785s O-Ring91615128s Back-Up Ring 101559696Retainer 111636853s Wiper 124559697Bearing 131559698Spacer 141678019Nut151671047s Seal Loader Kits Included in Service Kit 562338.Reference:S-3424.CylinderHydraulic Group35E/45EREF QTY PART NO.DESCRIPTION685828Hydraulic Group ITA II 11685831Hose22683173Hose312375Fitting, 6-648604511Fitting, 6-651682812s Valve62765329Capscrew, M8x1.25x20-8.8 72685978Hose ITA II82684956Cable tie94605235Fitting 5-6101200647Tube112604510Plug, 6121200649Tube131200648Tubes See Valve page for parts breakdown.ValveLoad Push/PullREF QTY PART NO.DESCRIPTION682812Valve Assembly 11677125Sequence Valve (Retract) 22669597Service Kit31682813Body45663694Fitting, 351677124Sequence Valve (Extend) 61659058Gripper Check Valve 71667516Service KitFaceplate GroupREF QTY PART NO.DESCRIPTION6019141Faceplate Group, 40 x 40 in.■6019055Gripper Jaw Assembly●11206396Gripper Jaw216002134Valve316020444Gripper Cylinder, LH◆416020443Gripper Cylinder, RH◆546020462Collar64617915Fitting, 4-4746014089Pin816002135Gripper Bar91672712Gripper Pad105680253Lockwasher, M8■Width x height.●Includes items 1-19.REF QTY PART NO.DESCRIPTION 115787375Capscrew, M8 x 20 122605743Fitting, 6-6132686573Bearing1426002138Hose, 315 mm 1526002139Hose, 450 mm 164617918Fitting, 4-4178669894Retaining Ring 184684956Wire Tie192787373Capscrew, M8 x 20 2016002170Faceplate, 40 x 40 in.■212768714Capscrew, M16 x 60 224225346Capscrew, M16 x 60◆See Gripper Cylinder page for parts breakdown.45EREF QTY PART NO.DESCRIPTION6020444Gripper Cylinder – LH 11646540▼ Seal 21636850▼ Wiper 312718▼ O-Ring 412710▼ O-Ring51615122▼ Back-Up Ring 616020453Shell 716020461Rod 81685664Retainer 91685665Piston 101563462Nut 111563916Ring 1213137Ring131663728▼ Piston Seal▼Included in Service Kit 684827.REF QTY PART NO.DESCRIPTION6020443Gripper Cylinder – RH 11646540▼ Seal 21636850▼ Wiper 312718▼ O-Ring 412710▼ O-Ring51615122▼ Back-Up Ring 616020452Shell 716020461Rod 81685664Retainer 91685665Piston 101563462Nut 111563916Ring 1213137Ring131663728▼ Piston Seal▼Included in Service Kit 684827.I See Solenoid Valve page for parts breakdown.G See Solenoid Valve page for parts breakdown. L See Control Knob page for parts breakdown.RacineREF QTY PART NO.DESCRIPTION 11614092Solenoid Valve – 36V 21665046Coil – 36V685012Service KitREF QTY PART NO.DESCRIPTION6009148Solenoid Valve Assy 11204978Valve Body216002106Coil - 36V316002084Valve Cartridge416009164Service KitReference: S-21076.Control KnobTwo Function – Sideshift Only35E/45EREF QTY PART NO.DESCRIPTION355058Knob Group11665250Snap Ring21355059Cover31665012Knob41665076Strain Relief51677112s Switch615902Nut, 3/8 NC71665081Adapter81667718Cable Assembly92667752Connector-Grays This switch may be purchased without wires. Order part number 665004. Soldering is required.P A R T S O R D E R I N G L O GP U R C H A S E S E R I A L R E F C A S C A D E C U S T O M E R D A T EO R D E R N U M B E RP A G E N O .Q T Y P A R T N O .P A R T N O .D E S C R I P T I O N P R I C EcDo you have questions you need answered right now? Call your nearest Cascade Parts Department.Visit us online at Cascade Corporation 2501 Sheridan Avenue Springfield, OH 45505Tel:888-CASCADE (227-2233)FAX: 888-329-0234Sales RussiaEMCG Material Handling Equipment MoscowTel: 095-795-2400FAX: 095-795-2475Email:***********Cascade (Singapore)Trading Co.Four Seasons ParkAutumn Block - Apt. 180212 Cuscaden Walk SingaporeTel: 65-834-1935FAX: 65-834-1936Cascade-XiamenNo. 668 Yangguang Rd.Xinyang Industrial Zone Haicang, Xiamen City Fujian Province P.R. China 361026Tel: 86-592-651-2500FAX: 86-592-651-2571Cascade New Zealand 15 Ra Ora DriveEast Tamaki, Auckland New Zealand Tel: 9-273-9136FAX: 9-273-9137Cascade Australia 1445 Ipswich Road Rocklea, QLD 4106AustraliaTel: 1-800227-223FAX: (07) 3373-7333Cascade Korea108B Namdong Ind. Complex 658-3 Gojan-Dong Namdong-GuInchon, 405-310 Korea Tel: 82-32-821-2051FAX: 82-32-821-2055Cascade Japan Ltd.5-5-41,Torikai Kami Settsu, Osaka Japan, 566Tel: 81-726-53-3490FAX: 81-726-53-3497Cascade (Africa) Pty. Ltd.PO Box 625, Isando 160060A Steel RoadSparton, Kempton Park South Africa Tel: 975-9240FAX: 394-1147Sales Poland Targowa 35/6103-728 Warszawa Tel: 022-619 00 49FAX: 022-619 00 49Mobile Phone: 0501-27 29 55Sales Switzerland Fahrzeugbedarf 8810, Horgen SwitzerlandTel: 01-7279797FAX: 01-7279798Sales Portugal FAG Santos Lda Rua do Mercado Lte 6, Loja 2-Tires 2785-630S. Domingos De Rana PortugalTel: 214-448-083FAX: 214-458-098Sales Italy Via Ponzano 1150047 Prato ItalyTel: 0574-571726FAX: 0574-571726Mobile Phone: 0337-673029Cascade Hispania S.A.Carrer 5, Sector C Zona Franca DuaneraPoligono de la Zona Franca 08040 Barcelona SpainTel: 93-264-07-30FAX: 93-264-07-31Cascade France S.A.R.L. MHP1D Rue De Charaintru BP 18,91360 Epinay-Sur-Orge FranceTel: 01-6454-7500FAX: 01-6454-7501Cascade Scandinavia AB Hammarvägen 10PO Box 124S-56723 Vaggeryd SwedenTel: 039-336950FAX: 039-336959Sales ScotlandMacade Systems Ltd.18 Melford Road Righead Ind. Estate Bellshill ML4 3LR ScotlandTel: 01698-845777FAX: 01698-845888Cascade (UK) Ltd.Unit 5, Eden CloseHellaby Lane Ind. Estate Heellaby,Rotherham S66 8RW EnglandTel: 01709-704500FAX: 01709-704501Cascade N.V.Benelux Sales and Service Damsluisweg 56PO Box 30091300 El Almere The Netherlands Tel: 036-5492950FAX: 036-5492974Cascade Finland A. Petreliuksenkatu 301370 Vantaa FinlandTel: 09-8361925FAX: 09-8361935Cascade GmbHDahlener Strasse 57041239 Mönchengladbach GermanyTel: 02166-68230FAX: 02166-682323Cascade Canada Inc.5570 Timberlea Blvd.Mississauga, Ontario Canada L4W-4M6Tel: 905-629-7777FAX: 905-629-7785。

BIOS的设置- 昂达魔剑A790GX 说明书使用手册

BIOS的设置cpu configuration(cpu设置)按[enter]键进入子菜单。

本项目显示你所使用的cpu的相关参数和更改cpu的相关设定。

gart error reporting开启或关闭gart错误功能。

设定值有：disabled,enabledmicrocode update本项目用来启动或关闭微处理器更新(microcode update)功能。

设定值有：disabled,enabledsecure virtual machine mode设定值有：disabicd,enabledcool n quict清凉安静技术，该技术可以使处理器根据所执行的工作来改变频率，降低处理器的功耗，降低cpu 风扇的转速。

acpi srat table设定值:disabled,enabled返回“高级bios功能设置”north bridge configuration(北桥芯片设置)按[enter]键进入子菜单设置。

internal graphics mode (板载显示卡工作模式)可选项：disabled,uma,sideport,uma+sideport其中“uma”表示使用共享显存：“sideport”表示使用集成显存：“uma+sideport”表示使用共享显存+集成显存。

uma frame.buffer size (共享内存的容量选择)可选项：auto,32mb,64mb,128mb,256mb,512mbgfx engine clock override禁止或启用集成显卡的频率调节选项，选“enable”启用则在其下显示“gfx engine clock”选项，在此选项逐兆调节集成显卡核心频率。

surround view(多重显示器支持技术)可选项：disabled,enabledfb location关于最大支持内存大小的一个选项，当你的内存在4g以上时，要设为above 4g才能正常识别。

阿特拉斯螺杆空气压缩机的专业知识试卷

阿特拉斯螺杆空⽓压缩机的专业知识试卷阿特拉斯螺杆空⽓压缩机的专业知识试卷⼀、阿特拉斯．科普柯简介（10分）阿特拉斯·科普柯公司成⽴于1837 年，⽬前是世界上最⼤跨国⼯业集团之⼀，总部设在瑞典的斯德哥尔摩，空压机的总部设在⽐利时的安特卫普，世界各地有50余家⼯⼚，⽣产三千多种产品，在150多个国家设有销售公司，代理商遍布85个国家和地区。

公司压缩机技术部下属共有 10 个分⼚，主要⽣产适⽤于空⽓和其它⼯业⽤⽓体的往复式、螺杆式、离⼼压缩机及其配套⽤⼲燥器、过滤器、冷却器、能量回收系统和控制系统等。

其中⽐利时的AIRPOWER 分⼚是的螺杆压缩机⽣产⼚，年产量达⼏万台，德国的ENERGAS 分⼚专门制造特殊⼯艺⽓压缩机，美国加州的和分⼚制造离⼼式空压机、⼯艺压缩机和膨胀机。

阿特拉斯·科普柯公司⼀百多年来向世界各地提供了⼤量的⾼质量压缩机、膨胀机以及优良的售后服务，获得世界各国⽤户良好信赖。

该公司在 1984 年起对国内进⾏直接销售业务，并向中国转让了有关的喷油螺杆压缩机技术。

年开始在中国设⽴办事处，到⽬前为⾄，在中国已成⽴了七个合资企业，并在北京、上海、西安、⼴州均有办事机构，另外在上海、⼴州还设⽴了维修中⼼。

1995 年在⽆锡⾼新技术开发区成⽴了⽆锡阿特拉斯·科普柯公司，可以为国内⽤户提供与国外阿特拉斯·科普柯公司同步技术⽔平的各类喷油螺杆压缩机。

⾄1995年⽌不完全统计已有数千台各类压缩机在全国医药、纺织、⾷品、电⼦、化⼯、⽯化等⾏业长期稳定动⾏。

⼆、机型认识（30分）1、G系列代表喷油螺杆压缩机GA指喷油式单级压缩，流量0.82-84.7m3/min功率 5.5-500 KW（GA排⽓压⼒：7.5,8.5,10,13GR：指双级压缩空⽓压缩机流量：压⼒为13 巴的压缩机流量为255-442 升/⼩时（541-937 ⽴⽅英尺/分钟）压⼒为20 巴的压缩机流量为211-385 升/秒（447-816 ⽴⽅英尺/分钟）功率110~200KW（110、132、160、200），排⽓压⼒13bar，20barGX ⼩型移动式螺杆机流量0.24~1.6m3/min功率2~11KW（2，3，4，5，6，7，11）；排⽓压⼒7.5bar，8.6bar；GAR是指铁路机车车辆专⽤喷油螺杆压缩机，流量0.6~3.7 m3/min；功率5~30KW；排⽓压⼒13bar，20barGN指双输出压缩机流量：（GN4.1 、GN4.2 、GN4.3、GN7.1、GN7.2、GN7.3、GN4.1、GN18.1、GN18.2）功率：4-18排⽓压⼒：9.75bar、12.75bar2、Z系列代表⽆油机ZA 单级压缩（⽔冷，压⼒在3.5bar左右）ZE 单级压缩（风冷，压⼒在3.5-4 bar）ZT双级压缩（风冷，压⼒在4~13bar）ZT15、ZT18、ZT22、ZT30、ZT37、ZT45、ZT55、ZT75、ZT110、ZT132、ZT145、ZT160、ZT200、ZT250、ZT275、ZT22VSD、ZT37VSD、ZT55VSD、ZT90VSDZR双级压缩（⽔冷，压⼒在4~13 bar左右）ZR30、ZR45、ZR55、ZR55VSD、ZR37VSD、ZR75、ZR90、ZR110、ZR132、ZR145、ZR160、ZR200、ZR250、ZR275、ZR300、ZR315、ZR355、ZR400、ZR425、ZR500、ZR750、ZR900、ZR90VSD、ZR132VSD、ZR250VSD、ZR315VSD、ZR3、ZR4、ZR5、。

电子部件拆装操作指南

电子部件拆装操作指南（仅供培训使用）
天津航空维修工程部编写时间：2013.1.8
电子部件拆装操作指南

一、在拆装板卡与组件时，首先需要注意按照手册要求对相关板卡与组件断电，否则容易导致板卡或组件的损坏。
电子部件拆装操作指南

二、拆装板卡与组件时，应执行飞机静电敏感部件维护标准程序板卡与组件上的大量的电子元件，大部分都属于静电敏感元件。静电敏感元件在日常维护中很容易受到静电，环境污染等外界因素的影响，我司E190 机队曾数次出现串件导致印刷电路板损坏的情况。因此，拆装板卡与组件时，应执行飞机静电敏感元件部件维护标准程序。

7、工作者在施工前接近部件后应仔细检查部件的安装是否有异常，在检查中及施工时发现异常，如本螺钉拧松时吃力，应果断中止工作，查找原因，及时报告，必要时可寻求支援；
8、安装过程中动作必须轻柔，否则容易造成销钉损坏。对相应紧固件应该交替拧松或拧紧，并按照手册要求施加力矩。

谢
谢！
电子部件拆装操作指南

3、静电敏感部件的拆装注意事项： 1）、带有ESDS标识的组件的拆装注意事项：（1）断开系统电源；（2）佩戴已用测试仪测试通过的防静电腕带，并将另外一端有效接地；（3）用清洁过的不沾油污的双手完成拆装步骤；（4）切记不要用手去触摸电插头上的插钉，并且按要求用插头防尘盖将插头盖好； (5) 拆下的部件在串件运输过程中需要注意防止颠簸，轻拿轻放；

3、拆装板卡或者组件时，首先根据手册断电；
4、注意防静电措施，注意带防静电腕带；运输或存储电子部件的过程中应远离电场或磁场等区域，并使用防静电袋。

5、拆除部件后检查底座后部插座状况良好，无异物。安装前应检查所要装的部件后部插针状况良好，无弯曲，无异物。

超同步GA手册

超同步GA手册bkservo第一章前言感谢您购买北京超同步科技有限公司生产的bks伺服控制器。

bks伺服控制器是北京超同步科技有限公司研制、开发生产的高质量、多功能、低噪音的交流伺服控制器。

bks 伺服控制器是鼠笼式电机（im）的伺服控制器，可对普通鼠笼式电机和变频电机的位置、转速、加速度和输出转矩通过编程方式进行控制，bks伺服控制器的研制成功为传动控制领域带来了生机。

BKS伺服控制器的核心采用32位CPU对电机进行数字控制。

电机可以以非常低的速度运行（1 rpm甚至1/8 rpm）。

具有RS232和RS422通信接口，内置22KW以下制动单元。

具有根据所述标准配置的用于定位的码盘接口和用于速度和位置跟踪的第二码盘；12点输入、8点输出接口和模拟输入输出接口，用于顺序控制。

因此，可以实现鼠笼式电动机的高性能控制。

它不仅可以满足普通变频器所能达到的技术指标，还可以应用于对定位精度要求很高的领域，如数控铣床的进给轴。

在数控机床、电动汽车等领域有着广阔的应用前景。

在使用bks伺服控制器之前，请您仔细阅读该手册，以保证正确使用。

错误使用可能造成控制器运行不正常、发生故障或降低使用寿命，甚至发生人身伤害事故。

因此使用前应反复阅读本说明书，严格按说明使用。

本手册为随机发送的附件，务必请您使用后妥善保管，以备今后对控制器进行检修和维护时使用。

1.1开箱检查注意事项在开箱时，请认真确认：在运输中是否有破损现象；控制器铭牌的型号、规格是否与您的订货要求一致。

如发现有遗漏或不相符的情况，请速与供货商联系解决。

1.2控制器铭牌在控制器箱体的右下方，贴有标示控制器型号及额定值的铭牌，铭牌内容如图1-1所示一bkservo控制器型号适用于电机容量、额定输出电压、电流和频率、额定输出容量、电流、频率范围和电压图1-1控制器铭牌1.3控制器型号说明代码：电压等级2220v4380v产品类型：BK伺服控制器bksc-47p5ga版本号代码：控制器类型G通用代码：自适应电机1p51 5kw7p57。

Series 90 130 cc轴向柱塞马达零件手册说明书

Series 90 130 cc Axial Piston MotorParts Manual© 2007 Sauer-Danfoss. All rights reserved.Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material.Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products alreadyordered provided that such alterations aren’t in conflict with agreed specifications. All trademarks in thismaterial are properties of their respective owners.Front cover illustrations: P100 609, P100 682, P100 630, P100 700 5 0L0896 • Rev AB • June 20075 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts Manual ContentsService parts identification .................................................................................................................4Nameplate ................................................................................................................................................4Date code ..................................................................................................................................................5Service bulletins .....................................................................................................................................5Procedure to identify a part (5)Order code ................................................................................................................................................7Common parts ....................................................................................................................................8-9Special hardware ..............................................................................................................................8-15End cap .............................................................................................................................................16-17Loop flushing ..................................................................................................................................18-19Charge pressure .............................................................................................................................20-21Shaft ...................................................................................................................................................22-23Overhaul seal kit .. (23)SB-1995-023 (slipper guide retainer) ............................................................................................24SB-2003-002 (cylinder block redesign) . (25)GeneraL InformatIonfIxed dIspLacement motorservIce buLLetIn5 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts ManualservIce parts IndentIfIcatIonThe following information and procedure is used to identify the module group, item number, manufacture date, part number, and part name of the parts included in the Series 90, 130 cc motors.The parts listed include all parts which may be used when performing either “Minor Repairs”, “Major Repairs” or “Conversions” on the Series 90, 130 cc motor.namepLateEach unit will have a nameplate affixed to the housing. The nameplate will include the following information.model codenumber.number used to identify a specific unit.General information55 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts ManualGeneral informationdate codeThe date code is defined as the year and week of manufacture. The same item number may list more than one part number. This indicates that there is more than one configuration for that item number. You will see that there are different date codes for the different part numbers. Find the date code of your unit from the nameplate to determine which service part number you need to order.EXAMPLE: The service part desired is Item H10N H10 89-38 8800668 Loop flushing spool, defeated1H10 87-02 89-378800021Loop flushing spool, defeated (SB-1989-020)1order date datecode Item begin end part number part nameusageAll units using this order code with a date code of 87-02 and up to and including 89-37, must use part number “8800021”. All units with a date code of 89-38 and newer must use part number “8800668.”.servIce buLLetInsA Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you desire. You must read that Service Bulletin prior to ordering that part. The information contained in these Service Bulletins, as of the print date of this bulletin, are included at the end of this manual. Service Bulletins contain more detailed information such as interchangeability, what additional parts are involved, etc. It is suggested that you add additional Service Bulletins to this manual as you recieve them.procedure to IdentIfy a part General The modular design of Series 90 units results in a simplified service parts list and partnumber identification procedure.The same item numbers are used for same part names on all units within a product type. (Example: The lip seal - Item L40 has the same item number on all motors.)A part number that has another number following it in parentheses is done to make this a world wide manual. The first number is sold in Germany. The number in parentheses is sold in the United States. (Example: 314583 (9008000-0118), customers would order 9008000-0118 if ordering the part in the United States.)example of a part IdentificationThe nameplate on a Series 90 motor has an Order Code of 90M130 NC 0 N 8 N 0 F1 W 00 EBA 00 00 G3 Use the following procedures to determine the part number of the drive shaft used on this motor.1) Referring to the output shaft module in the Order Code (see page 7), the output shaft option for this motor is identified by the code “S1”. (90M130 NC 0 N 8 N 0 f1 W 00 EBA 00 00 G3)2) Referring to the Service Parts List, find the shaft group. Next find the order code that relates to this unit, which is “F1”. The shaft is found to be item L100 and part number 310458.Series 90 130 cc Axial Piston MotorParts ManualNotes65 0L0896 • Rev AB • June 20075 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts Manual Order code90M 013N C0N8F 10N 00W G 30B AE 000seriesdisplacementnot applicablenot applicable end capnot applicable not applicable not applicable shaftLoop flushing not applicableGP100 711EL HWKspecial hardware featuresnot applicable not applicablecharge pressure settingtypeSeries 90 130 cc Axial Piston MotorParts ManualFixed displacement motor85 0L0896 • Rev AB • June 200795 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts Manualcommon partsorder date dateQty. per codeItembegin endpart numberpart namemodel/KitB10 89-04 304014Housing 1 B80A 89-04 001172 (9004201-9000) O-ring 1 B81A 89-04 001172 (9004201-9000) O-ring 1 B83A 89-04 085043 (9004201-3700) O-ring 1 C13 89-04 700922 Spring seat1 C14 89-04 302828 Cylinder block spring 1 C15 89-04 700930 Spring retainer 1 C16 89-04 302836 Retaining ring1 C20 89-04 727750 Piston assembly, welded 9 C30 89-04 735506 Slipper guide1 C40 89-04 500445 Slipper guide retainer (SB-1995-023)1 C45 89-04 505369 Slipper guide retainer spacer (SB-1995-023) 1 C50 89-04 761007 Hold down tube 1 C80 89-04 502190 Valve plate 1 D50 89-04 505364Thrust plate 1 G25 89-04 9004800-3708 Pin2 G30 89-04 304311 End cap gasket 1 G50 89-04 140644Plug assembly 2 G50A 89-04 085043 (9004201-3700) O-ring2 G70 89-04 140644Plug assembly 2 G70A 89-04 085043 (9004201-3700) O-ring 2 G90 89-04 309328 (9007210-1618) Screw 4 G95 89-04 674432 (9007210-1610) Screw 2 G96 89-04 648444 (9007210-1018) Screw1 L10 89-04 304857 Roller beraing 1 L15 89-04 376319 Shim1 L20 89-04 392209 Retaining ring 1 L50 89-04 509353O-ring 1L7089-04395723 (9007315-0805)Screw3Fixed displacement motorSeries 90 130 cc Axial Piston MotorParts ManualFixed displacement motorE100 872EEnlarged bold type itemnumbers are recommendedpart to stock for servicing. 105 0L0896 • Rev AB • June 200711 5 0L0896 • Rev AB • June 20071 5 0L0896 • Rev AB • June 200715 0L0896 • Rev AB • June 2007specIaL hardwareorder date dateQty. per codeItembegin endpart numberpart namemodel/KitEGF B10 89-04 304014Housing1 B80 89-04 320002 (9005110-9200) Plug assembly 1 B80A 89-04 001172 (9004201-9000) O-ring1 B81 89-04 511925Adaptor assembly 1 B81A 89-04 001172 (9004201-9000) O-ring1 B83 89-04 KPPG13703Speed sensor assembly 1 B83A 89-04 085043 (9004201-3700) O-ring1 C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1 L34 89-04 515842Seal assembly, double lip seal 1 L40 89-04 9008000-0114 Lip seal 2 L50 89-04 509353 O-ring1 L60 89-04 515343Retainer plate 1 L70 89-04 395723 (9007315-0805) Screw3 S07 89-04 519277Cylinder block kit w/speed ring1E100 874EEnlarged bold type itemnumbers are recommendedpart to stock for servicing.1 5 0L0896 • Rev AB • June 2007155 0L0896 • Rev AB • June 2007specIaL hardwareorder date dateQty. per codeItembegin endpart numberpart namemodel/KitHAB B10 89-0411014133Housing1 B80 89-04 320002 (9005110-9200) Plug assembly 1 B81 89-04 511925 Adaptor assembly1 B83 89-04 KPPG13703 Speed sensor assembly1 C05 89-04 519259 Cylinder block assembly w/speed ring (SB-2003-002) 1 L34 89-04 510018Seal assembly 1 L40 89-04 9008000-0114 Lip seal 1 L50 89-04 509353 O-ring1 L60 89-04 516769Retainer plate 1 L70 89-04 395723 (9007315-0805) Screw3S07 89-04 519277Cylinder block kit w/speed ring1165 0L0896 • Rev AB • June 2007E100 821EG70axial port end cap with solenoidEnlarged bold type item numbers are recommended part to stock for servicing.G0415 0L0896 • Rev AB • June 2007end caporder date dateQty. per codeItembegin endpart numberpart namemodel/Kit8 G04 89-04 310706 End cap assembly., twin 1 G20 89-04 303693 Journal bearing 1 G50 89-04 140644Plug assembly 2 G50A 89-04 085043 (9004201-3700) O-ring2 G70 89-04 140644Plug assembly 2 G70A 89-04 085043 (9004201-3700) O-ring2185 0L0896 • Rev AB • June 2007E100 876EEnlarged bold type item numbers are recommended part to stock for servicing.H60AH60H30h50aH50H20H30h50aH50H20H10H70h 0aH50H10H50H60H60AH50AH50AH10H50h50aH50h50aH20H30195 0L0896 • Rev AB • June 2007Loop fLushInGorder date dateQty. per codeItembegin endpart numberpart namemodel/KitD H10 89-04519246 Shuttle spool 1 H20 89-04 515828 Spring guide 2 H30 89-04 515829 Spring2 H50 89-04 516119Plug assembly 2 H50A 89-04 012559 (9004202-6200) O-ring2 H60 89-04 001529 (9005100-7500) Plug assembly3 H60A 89-04 001131 (9004201-5000) O-ring3 H70 89-04 140644Plug assembly 1 H70A 89-04 085043 (9004201-3700) O-ring 1K95aKK50E100 878EEnlarged bold type itemnumbers are recommendedpart to stock for servicing.05 0L0896 • Rev AB • June 200715 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts ManualcharGe pressure settInGorder date dateQty. per codeItembegin endpart numberpart name model/Kit00noneFixed displacement motorSeries 90 130 cc Axial Piston MotorParts ManualFixed displacement motorL80L100L100L80L100L90L61E100 775EEnlarged bold type itemnumbers are recommendedpart to stock for servicing.5 0L0896 • Rev AB • June 20075 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts Manualshaftorder date dateQty. per codeItembegin endpart numberpart namemodel/KitC8 L100 89-04304238 Shaft, 27 tooth spline, 16/32 1Fixed displacement motorSeries 90 130 cc Axial Piston Motor Parts Manualproducts affected subject descrIptIon Service Bulletin: SB-1995-023Series 90 130cc fixed motorsChange in slipper guide retainerSauer-Danfoss has changed the slipper guide retainer from a one piece retainer assembly to a two piece retainer on all 130cc fixed motors. This change creates a uniform product design platform for the 100cc, 75cc, 55cc, and 130cc motors.The new slipper guide retainer can be used with any vintage motor. The old slipper guide retainer assembly will be obsoleted and no longer available as a service part.All 97-3000 and 973xxx fixed displacement motorsUnits built with serial number N-95-26-xxxxx and after.modeLs affected serIaL numbersDescription Old p/n New p/nSlipper guide retainer assembly 309443 -Slipper guide retainer - 500445Slipper guide retainer shim - 505369 part numbersaffectedInterchangeableparts dIsposItIon5 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston Motor Parts Manualproducts affected subject descrIptIon Service Bulletin: SB-2003-002Series 90 130 thru 250cc pumps and motorsRedesign of cylinder block running faceAs a product improvement, Sauer-Danfoss is changing the outer foot of the running face on cylinder blocks used in all Series 90 variable pumps, fixed motors, and variable motors. The outer foot is now lower by .0008 to .0039in. [.02 to .1mm] than the running surface around the kidneys. The increased clearance between the outer foot and the valve plate helps optimize the unit’s performance. This change will improve the torque efficiency and volumetric efficiency of the product.A part number change tracks this change. We will replace the part numbers on previous blocks and block kits with new part numbers. The old part numbers are obsolete. They are no longer available for service parts.Series 90 130 thru 250cc pumps and motorsUnits built with serial number N-03-19-xxxxx for 130cc.Units built with serial number N-03-41-xxxxx for 180cc.Units built with serial number N-03-25-xxxxx for 250cc.modeLs affected serIaL numberspart numbers affectedInterchangeableparts dIsposItIon130ccOld part number New part number510330 519258518318 519275518056 519274518405 519277518317 519276519054 519259515351 5192598510087 519275510307 519274503753 519259302851 519258180ccOld part number New part number518355 5192788510160 519278518354 519261510694 519261250ccOld part number New part number518359 5192798510148 519279518356 519265513474 51926555 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston MotorParts ManualNotes65 0L0896 • Rev AB • June 2007Series 90 130 cc Axial Piston MotorParts ManualNotes5 0L0896 • Rev AB • June 2007sauer-danfoss mobile power and control systems – market Leaders worldwideSauer-Danfoss is a comprehensive supplier providing completes ystems to the global mobile market.Sauer-Danfoss serves markets such as agriculture, construction, road building, material handling, municipal, forestry, turf care, and many others.We offer our customers optimum solutions for their needs and develop new products and systems in close cooperation and partnership with them.Sauer-Danfoss specializes in integrating a full range of systemc omponents to provide vehicle designers with the most advanced total system design.Sauer-Danfoss provides comprehensive worldwide service for its products through an extensive network of Global Service Partners strategically located in all parts of the world.our products Hydrostatic transmissions Hydraulic power steering Electric power steering Electrohydraulic power steering Closed and open circuit axial piston pumps and motors Gear pumps and motors Bent axis motors Orbital motors Transit mixer drives Planetary compact gears Proportional valves Directional spool valves Cartridge valvesHydraulic integrated circuits Hydrostatic transaxles Integrated systems Fan drive systems ElectrohydraulicsMicrocontrollers and software Electric motors and inverters Joysticks and control handles Displays SensorsLocal address:Sauer-Danfoss (US) Company 2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239-6000Fax: +1 515 239 6618Sauer-Danfoss GmbH & Co. OHG Postfach 2460, D-24531 NeumünsterKrokamp 35, D-24539 Neumünster, Germany Phone: +49 4321 871-0Fax: +49 4321 871 122Sauer-Danfoss ApSDK-6430 Nordborg, Denmark Phone: +45 7488 4444Fax: +45 7488 4400Sauer-Danfoss-Daikin LTD Sannomiya Grand Bldg. 8F 2-2-21 Isogami-dori, Chuo-ku Kobe, Hyogo 651-0086, Japan Phone: +81 78 231 5001Fax: +81 78 231 50045 0L0896 • Rev AB • June 2007。

阿特拉斯空压机介绍

E – 油/气分离器
L – 油过滤器
M – 回油管 N – 由停止阀
GA200-315 部件展开图
Twin-Element Design
内置干燥器冷却风扇空气过滤器
油气分离器
电脑控制器
油过滤器
马达转子
卸荷阀
GA200-315 全性能
简单高效的调节系统低维护高可靠性能
流程图
Air Out
GA180 VSD
GA315 VSD
GA90-160 部件展开图
单级螺杆设计
内置干燥器冷却风扇空气过滤器油过滤器旁通阀
油气分离器
电脑控制器
转子卸荷阀
马达
润滑油在喷油螺杆中三个作用
橡胶连轴器传动齿轮阳螺杆阴螺杆
轴承
轴承
润滑油在喷油螺杆中三个作用
• 1.润滑齿轮，轴承，螺杆。 • 2.是冷却的媒介。 • 3.在螺杆以及壳体之间形成油膜密封。
液态制冷剂气/液混合气态制冷剂
保温冷却后油
空气进口空气/油混合湿空气干空气
压缩制
GR110-200 流程图
简单高效的调节系统低维护高可靠性能
Air Out
GA180 VSD
流程图
设计简单的空气进口处降低内部损失和提高效率可靠性高
空气
气/油能
卸荷阀 – 调节装置
卸荷阀 – 卸载状态
卸荷阀 – 加载状态
SPM
• 方便可见的测量点 • 可以预测以下部件状态
– 转子 – 齿轮箱 – 马达
干燥器
inlet
SPM
•方便可见的测量点 •可以预测以下部件状态
–转子
–齿轮箱 –马达