ONU常用命令(汇总)

合集下载

中兴OLT和onu常用命令

中兴OLT和onu常用命令(config-if)#shutdown 关掉当前ONU数据C320(config)#line telnet idle-timeout 10 设置在线时间为10分钟show cpe information gpon-olt_1/8/1 1 查看ONU设备当前版本ZXAN(config-if)# interface gei_0/1/1ZXAN(config-if)# negotiation auto 将端口速率调为自适应ZXAN(config-if)# speed 1000 将端口速率调为千兆show interface optical-module-info gei_1/19/3 OLT上联口光功率查看sho interface optical-module-info gpon-olt_1/2/8 查看OLT 上PON口光模块类型信息Con t 回车在OLT的PON口下ONU重启操作pon-onu-mng gpon-onu_1/2/1:5 回车reboot 回车C300(config)#mac delete vlan 601 清除601的所有mac 地址C300(config)#add-card rackno 1 shelfno 1 slotno 8 GTGO 添加C300第8个业务板C300(config)#del-card rackno 1 shelfno 1 slotno 8 删除C300第8个业务板(config)#interface gpon-onu_1/4/4:3(config-if)#switchport vlan 2528 tagZXAN# erase configuration 回车在ONU下清楚ONU数据Y 回车reboot 回车重启设备C300-01#show card 查看板卡信息C300-01#show gpon onu uncfg 查看是否有未做数据的ONU show gpon onu uncfg gpon-olt_1/12/8 查看PON口下未做数据的ONUshow running-config interface gpon-olt_1/7/1 查看PON口下在用的ONU设备SN号ZXAN# show interface fei_0/1/1-8 port-statusZXAN# conZXAN(config)#interface range fei_0/2/1-16 进入ONU下1~24口ZXAN(config-if)# no shutdown 全部打开端口ZXAN(config)#show interface fei_0/1/1-8 port-status 查看F803设备端口开启没有F822# show interface fei_0/2/1-16 port-status 查看F822设备端口开启没有Port AdminStatus LinkStatus TxRate(Mbps)----------------------------------------------------------------- 2/1 enable up 100M2/2 enable down N/A.2/3 disable down N/A.2/4 enable up 100M2/5 enable up 100M2/6 enable up 100M2/7 disable down N/A. 未开启2/8 enable up 100MC300(config)#interface gpon-onu_1/2/4:3 进到原ONU端口下C300(config-if)#reC300(config-if)#registration-method sn ZTEGB00016D6替换新的ONUC300(config-if)#exitC300#show running-config interface gpon-onu_1/2/4:3 查看新设备数据show interface optical-module-info gei_1/19/1 查看OLT上联口1/19/1口的收发光情况show interface port-status gei_1/19/1-4 查看OLT1/19/1~4口的运行情况sho pon power onu-rx gpon-onu_1/2/1: 5 查看ONU的收光命令，要求范围为-8——-24sho interface optical-module-info gpon-olt_1/2/1 查看OLT PON口的发光命令show running-config interface gpon-onu_1/5/3:7 查看F803 ONU设备配置情况show onu running config gpon-onu_1/7/1:7 查看ONU情况。

ONT常用命令

蓝色字体为固定命令参数，红色字体需要填写的配置信息，由实际情况决定。

绿色字体为打入命令的反馈信息，用来显示打入命令是否成功。

1.登录5683T Telnet 10.11.104.2>>User name:root输入用户名>>User password:admin输入密码MA5683T>enable进入特权模式MA5683T#config进入全局配置模式MA5683T(config)#switch language-mode切换本地语言2.进入GPON板卡MA5683T(config)#interface gpon0/0进入gpon 0框 0槽端口位置需要根据实际情况改变3.查看自动发现的ont及确认添加ontMA5683T(config-if-gpon-0/0)#display ont autofind查看自动发现的ont 信息{ portid<U><0,7> }:0输入要查询的端口号（待安装用户所在端口）若端口下不存在自动发现的ont，会提示如下：命令：display ont autofind 0失败: 不存在自动发现的ONT如果端口下存在自动发现的ont，会提示如下：命令：display ont autofind 0--------------------------------------------------------------------------序列号框/槽/端口 SN 密码--------------------------------------------------------------------------1 0/ 0/ 6 48575443BBBBE005--------------------------------------------------------------------------添加ONT ：MA5683T(config-if-gpon-0/0)#ont confirm2(此为端口号) sn-auth 48575443E5213D06omci ont-lineprofile-id 1 ont-srvprofile-id 1确认2端口下sn为48575443BBBBE005 的ont，网管协议为omci，ont-lineprofile-id文件的ID为 1 ，ont-srvprofile-id文件的ID为 1。

中兴OLT和onu常用命令

(config-if)#shutdown 关掉当前ONU数据C320(config)#line telnet idle-timeout 10 设置在线时间为10分钟show cpe information gpon-olt_1/8/1 1 查看ONU设备当前版本ZXAN(config-if)# interface gei_0/1/1ZXAN(config-if)# negotiation auto 将端口速率调为自适应ZXAN(config-if)# speed 1000 将端口速率调为千兆show interface optical-module-info gei_1/19/3 OLT上联口光功率查看sho interface optical-module-info gpon-olt_1/2/8 查看OLT上PON口光模块类型信息Con t 回车在OLT的PON口下ONU重启操作pon-onu-mng gpon-onu_1/2/1:5 回车reboot 回车C300(config)#mac delete vlan 601 清除601的所有mac 地址C300(config)#add-card rackno 1 shelfno 1 slotno 8 GTGO 添加C300第8个业务板C300(config)#del-card rackno 1 shelfno 1 slotno 8 删除C300第8个业务板(config)#interface gpon-onu_1/4/4:3(config-if)#switchport vlan 2528 tagZXAN# erase configuration 回车在ONU下清楚ONU数据Y 回车reboot 回车重启设备C300-01#show card 查看板卡信息C300-01#show gpon onu uncfg 查看是否有未做数据的ONUshow gpon onu uncfg gpon-olt_1/12/8 查看PON口下未做数据的ONUshow running-config interface gpon-olt_1/7/1 查看PON口下在用的ONU设备SN号ZXAN# show interface fei_0/1/1-8 port-statusZXAN# conZXAN(config)#interface range fei_0/2/1-16 进入ONU下1~24口ZXAN(config-if)# no shutdown 全部打开端口ZXAN(config)#show interface fei_0/1/1-8 port-status 查看F803设备端口开启没有F822# show interface fei_0/2/1-16 port-status 查看F822设备端口开启没有Port AdminStatus LinkStatus TxRate(Mbps)-----------------------------------------------------------------2/1 enable up 100M2/2 enable down N/A.2/3 disable down N/A.2/4 enable up 100M2/5 enable up 100M2/6 enable up 100M2/7 disable down N/A. 未开启2/8 enable up 100MC300(config)#interface gpon-onu_1/2/4:3 进到原ONU端口下C300(config-if)#reC300(config-if)#registration-method sn ZTEGB00016D6替换新的ONUC300(config-if)#exitC300#show running-config interface gpon-onu_1/2/4:3 查看新设备数据show interface optical-module-info gei_1/19/1 查看OLT上联口1/19/1口的收发光情况show interface port-status gei_1/19/1-4 查看OLT1/19/1~4口的运行情况sho pon power onu-rx gpon-onu_1/2/1: 5 查看ONU的收光命令，要求范围为-8——-24sho interface optical-module-info gpon-olt_1/2/1 查看OLT PON口的发光命令show running-config interface gpon-onu_1/5/3:7 查看F803 ONU设备配置情况show onu running config gpon-onu_1/7/1:7 查看ONU情况。

ONU配置命令

quit(退出）
service-port vlan 180 （管理VLAN）gpon 0/1/0 ont 0 gemport 0(管理VLAN为0) multi-service user-vlan 180 (建立业务虚通道，管理VLAN)
service-port vlan 1000（外层VLAN） gpon 0/1/0 ont 0 gemport 1（业务VLAN为1） multi-service user-vlan 1000 （建立业务虚通道，业务VLAN）
save保存
ONU数据
root(账户)
mduadmin（密码）
vlan 1000 smart（建立VLAN属性为smart）
vlan attrib 1000 stacking（VLAN的q-in-q属性）
port vlan 1000 0/0 1（将外层VLAN透传到上行口）
display board 0(查看单板)
board con？ 0(确认单板)
service-port vlan 1000（外层VLAN） adsl 0/1/0-31 （框槽端口）vpi 8r 6（建立业务虚端口）
stacking label service-port 0（端口） 1000（内层VLAN）端口对应相应的内层VLAN，一块单板32个端口都要对应。
OLT数据：
root(账户)
admin（密码）
enable
config
switch language-mode (转换为中文)
display ont autofind all（自动发现ONU）
interface gpon 0/1 （进入PON板)
ont add 0 0 sn-auth "4857544335C21D03" snmp ont-lineprofile-id 10 desc"FengMingShanShui_MA5616"（绑定SN编码和线路模板）

onu的查看及注册命令(三种olt)2013.07

华为switch language-mode 当前语言模式已切换到本地语种DG-HJBT-5680T> enDG-HJBT-5680T# config 进入特权模式DG-HJBT-5680T(config)# display ont autofind all 显示自动发现的OnuDG-HJBT-5680T(config)# display board 0/1 显示第一槽下的所有epon口onu格林威尔show pen 查看已接好，但还没注册的onushow onu-list pon 5/3 查看PON口下以注册ONU瑞斯康达Lan ch 当前语言模式已切换到本地语种DG-ST-EE01-I5800E>enDG-ST-EE01-I5800E#shDG-ST-EE01-I5800E#show inDG-ST-EE01-I5800E#show interface onDG-ST-EE01-I5800E#show interface onu inDG-ST-EE01-I5800E#show interface onu information一、I5800的onu（已接好但没有注册的Onu会自动提示）：登录：1、show interface onu information //查看所有onu在线情况。

show interface onu 9/3/3 information //查某个onu的在线情况。

2、查看SN号：Raisecom#show int onu 2/2/1 snRaisecom#show interface onu creation-information//查onu的创建情况。

Raisecom #show interface onu 1/1/1 uni ethernet vlan //查onu的vlanRaisecom #show interface onu 1/1/1 uni ethernet inf //查Onu的端口是否up。

ONU 240各业务配置命令

ONU 240对接各业务配置命令一、240开专线用户，每用户用一个CVLAN（此方式也可用于对接广电EOC，即EOC下所有用户共享同一CVLAN）ENT-QOS-MARKPROF::12:::mark_trans2:PROFTYPE=VLANTAG,DOT1P=0,UNTAGDS=XMITNOTAG; ENT-QOS-SESSPROF::12:::sess_trans2:UPMARKPROFID=12,UPMARKPROFNM=;注：创建前先查看此业务所需QOS是否已创建，查看命令：RTRV-QOS-MARKPROF，注意核对红色标记。

如创建新的SVLAN，用RB、STACKED模式PONVLAN，如利用以前PONVLAN核对是否为此模式。

ED-PON::PON-1-1-1-1:::::IS;ENT-ONT::ONT-1-1-1-1-1::::SERNUM=ALCLF9A5DC8F,SWVERPLND=3FE51559AFQA49:IS;ENT-ONTCARD::ONTCARD-1-1-1-1-1-1:::10_100BASET::IS;ENT-ONTENET::ONTENET-1-1-1-1-1-1-1::::AUTODETECT=10_100_1000BASETAUTO,CVLANDEF=1600, SESSPROFID=12,MAXMACNUM=128:IS;ENT-ONTENET::ONTENET-1-1-1-1-1-1-2::::AUTODETECT=10_100_1000BASETAUTO,CVLANDEF=1601, SESSPROFID=12,MAXMACNUM=128:IS;ENT-ONTENET::ONTENET-1-1-1-1-1-1-3::::AUTODETECT=10_100_1000BASETAUTO,CVLANDEF=1602, SESSPROFID=12,MAXMACNUM=128:IS;ENT-ONTENET::ONTENET-1-1-1-1-1-1-4::::AUTODETECT=10_100_1000BASETAUTO,CVLANDEF=1603, SESSPROFID=12,MAXMACNUM=128:IS;ENT-SERVICE-HSI::HSI-1-1-1-1-2-1-1-1::::BWPROFUPID=10,BWPROFDNID=10,PQPROFID=15,SVLAN=1 600,ETHERTYPE=UNUSED,UNISIDEVLAN=0,NETWORKSIDEVLAN=0:IS;ENT-SERVICE-HSI::HSI-1-1-1-1-2-1-2-1::::BWPROFUPID=10,BWPROFDNID=10,PQPROFID=15,SVLAN=1 600,ETHERTYPE=UNUSED,UNISIDEVLAN=0,NETWORKSIDEVLAN=0:IS;ENT-SERVICE-HSI::HSI-1-1-1-1-2-1-3-1::::BWPROFUPID=10,BWPROFDNID=10,PQPROFID=15,SVLAN=1 600,ETHERTYPE=UNUSED,UNISIDEVLAN=0,NETWORKSIDEVLAN=0:IS;ENT-SERVICE-HSI::HSI-1-1-1-1-2-1-4-1::::BWPROFUPID=10,BWPROFDNID=10,PQPROFID=15,SVLAN=1 600,ETHERTYPE=UNUSED,UNISIDEVLAN=0,NETWORKSIDEVLAN=0:IS;二、240开专线用户，共用同一个CVLAN注：此业务模式所需QOS及注意事情，参考一。

格林6900常用命令

格林6900常用命令目录查看未注册ONU (1)添加ONU (2)根据MAC地址查看已注册ONU (2)根据PON口查看ONU (3)OLT收ONU的光 (3)ONU看OLT的光 (4)OLT发光 (5)查看未注册ONUBYH-GW-1(config)#show pending-onuPON LLID macAddress reason----------------------------------------------No pending onuBYH-GW-1(config)#添加ONUGFA6900(config)#add onu-register authentication entry 1/13 000f.e927.23e2 根据MAC地址查看已注册ONUBYH-GW-1(config)#show onu information mac 000f.e927.14e2onu 1/5/24 Device Information list:device Type:GT813_C device desc:Easypath ONU-CTC -Mac addr:000f.e927.14e2Vendor Info:GWDLdevice SN:GT813T1503103913product Date:2015-03-23Oam version:3 OAM standard according to 802.3ah Standard 3.0onu name:ONU-24FEonu description:CTC-ONU-Readyonu location:Beijing ChinaBoot Ver: boot Software Ver:V1R01B301 Hardware Ver:V1.0B1 Firmware Ver:V3.1.1.1opStatus: up encrypt started:not started Range:2710m Encrypt direction:noneon-line time:0021:22:55:51 Encrypt Keytime:120(s)Start time: 2015-10-01, 15:31:38 onu traffic service:enableUp-Bandwidth:15000(kbit/s) Dn-Bandwidth:No policerUp-fixed:0(kbit/s)根据PON口查看ONUBYH-GW-1(config)#show onu-list pon 2/16Idx Mac addr type status online-time offline-time userName ------------------------------------------------------------------------------------------------pon2/16 [onu counter = 7]1 000f.e92c.c87e GT813_C up 2015/10/21,17:33:34 2015/10/21,17:30:56 21shijizhonglou49zhong-di6 000f.e926.dc94 GT815_C up 2015/10/05,12:42:23 2015/10/05,12:41:33 21shijilouzhonglou11#-dixiashi7 00d0.d04d.7b93 Other powerDown 2015/10/10,17:36:21 2015/10/12,21:18:368 000f.e926.e40e GT815_C up 2015/10/05,11:50:38 2015/10/05,11:48:31 ONU-16FE9 000f.e926.d520 GT815_C up 2015/10/05,11:50:32 2015/10/05,11:48:31 ONU-16FE10 000f.e927.1192 GT813_C up 2015/10/05,11:50:34 2015/10/05,11:48:31 ONU-24FE11 000f.e926.e494 GT815_C up 2015/10/19,10:59:55 2015/10/19,10:58:47 ONU-16FEOLT收ONU的光BYH-GW-1(config)#show optical-power olt-rx 1/8 1-64OnuIdx Status rx-power(dbm) running/down time---------------------------------------------------------1/8/1 up -23.7 0007:03:29:121/8/2 up -25.1 0012:22:14:561/8/3 up -22.6 0012:22:15:101/8/4 up -31.6 0012:22:14:511/8/5 up -24.5 0012:22:14:331/8/6 up -27.1 0001:00:23:041/8/22 up -25.8 0012:22:14:541/8/28 up -26.9 0001:23:25:141/8/29 up -22.2 0012:22:15:551/8/31 up -23.0 0012:22:15:001/8/32 up -27.0 0012:22:15:011/8/33 up -26.8 0010:03:12:301/8/34 up -22.0 0012:22:14:501/8/35 up -23.1 0012:22:14:53 1/8/36 up -25.4 0012:22:15:51 1/8/37 up -24.3 0012:22:06:31 1/8/38 up -22.9 0012:22:14:55 1/8/39 up -23.0 0012:22:14:47 1/8/40 up -25.8 0012:22:14:43 1/8/42 up -24.7 0012:22:15:54 1/8/43 up -24.0 0012:22:14:37 1/8/44 up -24.5 0012:22:14:58 1/8/45 up -23.7 0000:21:12:33 1/8/46 up -22.7 0005:21:06:12 1/8/47 up -24.1 0012:20:37:11 1/8/48 up -27.1 0012:22:14:45 1/8/49 up -24.2 0012:22:14:48 ONU看OL T的光BYH-GW-1(config)#show optical-power onu 1/8 1-64onu 1/8/1 do not support power-metering reportonu 1/8/2temperature: 36 Cworking-voltage: 3.3 Vbias-current: 9(mA)tx-power: 2.0 dbmrx-power: -21.9 dbmonu 1/8/3temperature: 33 Cworking-voltage: 3.4 Vbias-current: 9(mA)tx-power: 1.8 dbmrx-power: -19.1 dbmonu 1/8/4temperature: 33 Cworking-voltage: 3.4 Vbias-current: 10(mA)tx-power: 1.6 dbmrx-power: -25.9 dbmonu 1/8/5temperature: 34 Cworking-voltage: 3.2 Vbias-current: 9(mA)tx-power: 2.2 dbmrx-power: -21.4 dbmOLT发光JSGW-GW-1(config)#show optical-power olt 1/8 Temperature: 24 CelsiusWorking-voltage: 3.3 VBias-current: 13(mA)TX Optical-power: 4.9 dbm查看环路JYMH-GW-1(config)#show loop-detection guoying1-16(2/7/9) eth-port 1/17 looped in vlan 219ONU-24FE(2/7/2) eth-port 1/5 looped in vlan 39jixianghuayuan3qi1#-1(1/11/15) eth-port 1/19 looped in vlan 365 jingyiminhang14-4(2/8/12) eth-port 1/4 looped in vlan 278 jingyiminhang14-4(2/8/12) eth-port 1/2 looped in vlan 276 jingyiminhang14-4(2/8/12) eth-port 1/8 looped in vlan 282 weishilu22-3-2(2/6/7) eth-port 1/10 looped in vlan 164 fenghuangtaidonghuayuan5#-3(1/15/5) eth-port 1/7 looped in vlan 113 -----------------------------------------------------------------------find looped counter = 8。

贝尔7353ONU简单常用命令

贝尔ASM7353常用命令端口号表述：框号/子框号/槽位号/端口号，基本命令：ENT：创建ED：修改editDLT：删除deleteRTRV：查看值班常用命令1.根据vlan查找端口rtrv-vlan::cvlan-694::;"CVLAN-948::BCCNTL=OFF,CFGMODE=SA_XCONNECT,VLANNAME=\"\",DHCPOPTION=FALSE, CIRCUITIDOPTION=NOTADD,REMOTEIDOPTION=NOTADD,DHCPLINERA TEOPTION=NOTADD,PPPOELINERATEOPTION=NOTADD,GROUPID= 0,PPPOERELAY=FALSE,VLANVERSION=1,PRIORITY=BESTEFFORT,DYNAMICCNTID=0,CIRCUITIDPPPOE=NOTADD,REMOTEIDPPPOE=NOTADD ,SECUREDFWD=DISABLE,AGINGTIME=-1,VMAC=DISABLE,VMACDNSTRFILTER=DISABLE,L2CPTRANS=DISABLE""CVLAN-948:ATMPORT-1-1-2-32-8-35:BCCNTL=OFF,CFGMODE=SA_XCONNECT,VLANNAME=\"\",DHCPOPTION=FALSE,C IRCUITIDOPTION=NOTADD,REMOTEIDOPTION=NOTADD,DHCPLINERATEOPTION=NOTADD,PPPOELINERA TEOPTION=NOTADD,GROUPID=0,P PPOERELAY=FALSE,VLANVERSION=1,PRIORITY=BESTEFFORT,DYNAMICCNTID=0,CIRCUITIDPPPOE=NOTADD,REMOTEIDPPPOE=NOTADD,S ECUREDFWD=DISABLE,AGINGTIME=-1,VMAC=DISABLE,VMACDNSTRFILTER=DISABLE, L2CPTRANS=DISABLE"可以看到对应的端口第2槽位第32个端口，其他都是一些固定参数2.显示所有速率模板rtrv-profile-xbearer::all::;"4::MINBRDN=512,MINBRUP=128,PBRDN=512,PBRUP=256,MAXBRDN=5344,MAXBRUP =576,L2LPBRDN=128,MAXDELDN=5,MAXDELUP=5,MININPDN=0,MININPUP=0,ERASUREDETDOWNSTR=NOERASURE,ERASUREDETUPSTR=NOERASURE"4为速率模板索引号MINBRDN=512//最小下行速率MINBRUP=128//最小上行速率PBRUP=256 保障上行速率PBRDN=512 保障下行速率MAXBRDN=5344//最大下行速率MAXBRUP=576//最大上行速率MAXDELDN=5,MAXDELUP=5 交织值查看Spectrum Profile协议模板rtrv-profile-xlnecom::all::创建7353宽带模板ENT-PROFILE-XSRVC::4:::Z2M; （创建索引号名称）ED-PROFILE-XBEARER::4::::MINBRDN=512,MINBRUP=128,PBRDN=512,PBRUP=256,MAXBRDN=2688 ,MAXBRUP=352,MAXDELDN=5,MAXDELUP=5;（创建速率）ACT-PROFILE-XSRVC::4::; （激活模板）3、显示端口使用的速率模板和端口状态RTRV-XDSL::XDSL-1-1-2-31; (第二槽第一个端口)RTRV-ETHPORT：：ALL；PONLAN所有XDSL-1-1-1-1::PORTID=available,XSRVCPROFID=5,XSRVCPROFNM=UP1M_DN4M, XLNEPROFID=1,XLNEPROFNM=XDSL,XDPBOPROFID=0,OPMASKA=H'0000,OPMASKA 2=H'00000000,OPMASKV=H'0000,OPMASKA2M=H'0000,OPMASKV2=H'0000,LCMODEA=H'0105,LCMODEA2=H'014C0004,LCMODEV=H'0000,LCMODEA2M=H'0004,L CMODEV2=H'0000,TPSTCMODE=DEFAULT,OVERRULE=NOTCREATED,INSMODE=DISABLE:OOS-AUMAXSRVCPROFID=5 速率模板号XSRVCPROFNM=UP1M_DN4M, 模板名称状态OOS-AUMA 端口被闭掉状态OOS-AU 用户MODEM 没有同步状态IS 用户MODEM同步XLNEPROFID=1 协议模板号一般为固定4 打开端口应用速率模板ED-XDSL::XDSL-1-1-3-31::::PORTID=:IS ;（激活端口，调用的是默认模板）ED-XDSL::XDSL-1-1-1-1&&-32::::PORTID=:IS; (激活第一块板卡上的所有端口)ED-XDSL::XDSL-1-1-2-1::::PORTID=,XSRVCPROFID=4,XLNEPROFID=1:IS;（调用速率模板并激活）5、查询端口线路质量最大可达速率REPT-OPSTAT-XLNE::XDSL-1-1-1-1;"XDSL-1-1-1-1:RELCAPUP,36""XDSL-1-1-1-1:NMRUP,265" 噪声容限"XDSL-1-1-1-1:PWRDN,68""XDSL-1-1-1-1:ATENUP,36""XDSL-1-1-1-1:LPATENUP,36""XDSL-1-1-1-1:PSDDN,-553""XDSL-1-1-1-1:PWRMGST,L0 -Synchronised""XDSL-1-1-1-1:PRBNDLPATTUP,\"00 00 00 00 00 00 00 00 00 00 \"""XDSL-1-1-1-1:PRBNDSIGATTUP,\"00 00 00 00 00 00 00 00 00 00 \"""XDSL-1-1-1-1:PRBNDNSMARUP,\"00 00 00 00 00 00 00 00 00 00 \"""XDSL-1-1-1-1:HIGHESTFREQUP,134""XDSL-1-1-1-1:ELECLENUP,0""XDSL-1-1-1-1:TIMCORUP,-752""XDSL-1-1-1-1:ACTTPSTC,A TM""XDSL-1-1-1-1:RELCAPDN,17""XDSL-1-1-1-1:NMRDN,396" 噪声容限XDSL-1-1-1-1:PWRUP,1""XDSL-1-1-1-1:ATENDN,91""XDSL-1-1-1-1:LPATENDN,91""XDSL-1-1-1-1:PSDUP,-502""XDSL-1-1-1-1:PRBNDLPATTDN,\"00 00 00 00 00 00 00 00 00 00 \"""XDSL-1-1-1-1:PRBNDSIGATTDN,\"00 00 00 00 00 00 00 00 00 00 \"""XDSL-1-1-1-1:PRBNDNSMARDN,\"00 00 00 00 00 00 00 00 00 00 \"""XDSL-1-1-1-1:HIGHESTFREQDN,2204""XDSL-1-1-1-1:ELECLENDN,0""XDSL-1-1-1-1:TIMCORDN,753"rept-opstat-xbearer::xdsl-1-1-2-1::;"XDSL-1-1-1-1:CURBRUP,573" 上行速率=573，单位kbits/s"XDSL-1-1-1-1:CURDELUP,3""XDSL-1-1-1-1:IMNPROTUP,10""XDSL-1-1-1-1:MAXA TTBRUP,1427" 最大上行可达速率=1427，单位kbits/s"XDSL-1-1-1-1:CURBRDN,3999" 下行速率=3999，单位kbits/s"XDSL-1-1-1-1:CURDELDN,3""XDSL-1-1-1-1:IMNPROTDN,30""XDSL-1-1-1-1:MAXATTBRDN,25088" 最大下行可达速率=25088"XDSL-1-1-1-1:CURL2BRDN,0"6、端口加锁和解锁ED-XDSL::XDSL-1-1-1-1::::PORTID=:OOS ;ED-XDSL::XDSL-1-1-1-1::::PORTID=:IS ;7、端口同步后，显示端口学习到用户端MACRTRV-L2FDB::ALL:::ALL;"ATMPORT-1-1-3-2-8-35:SVLAN=0,CVLAN=358:0070305F92T4::SUBSVLAN=0, SUBCVLAN=358"8、显示某一端口学习到的MACRTRV-L2FDB::ATMPORT-1-1-3-2-8-35;"ATMPORT-1-1-3-2-8-35:SVLAN=0,CVLAN=358: 0070305F92T4:LEARNED:SUBSVLAN=0, SUBCVLAN=358"处理障碍时可以通过上述命令判断是否为用户端障碍，如同步后没有学习到MAC，基本上可以判断用户端MODEM和pc有问题。

中兴ONU设备F822常用命令

10.95.16.60-YZOLT-GQSZJ-F822(ag)# show cardSlot Shelf Type Port HardVer SoftVer Status----------------------------------------------------------------------1 1 V24B 16 090202-02 V1.1.0P1T3 Inservice2 1 MSEBB 16 090202-02 V1.1.0P1T3 Inservice3 1 GNI 2 090202-02 V1.1.0P1T3 Inservice----------------------------------------------------------------------10.95.16.60-YZOLT-GQSZJ-F822(ag)# show versionCardType Type VerNo VerLen Status BuildTime State FileName--------------------------------------------------------------------------------M24E MVER V1.1.0P1T3 7847937 VALID 20100609165848 active m24e.bin SM24E MVER V1.1.0P1T3 4352308 VALID 20100426181355 active SM24E.bin M24E SVER V1.1.0P1T3 1610420 VALID 20100426181413 active M24E_SV.binCurrent Boot Info:M24E BOOT V1.1.0P1T3 367840 VALID 20100426170253 activeCurrent Chip Info: 0X0000000B10.95.16.60-YZOLT-GQSZJ-F822(ag)# show runendconfigureepm-switch onhostname 10.95.16.60-YZOLT-GQSZJ-F822endconfigure vlan databasevlan 51,55,1081-1096endconfigureanti-mac-spoof disableendconfigure interface inband-vlan 55ip address 10.95.26.148 255.255.252.0 name "OAMSubnet"endconfigure interface inband-vlan 51ip address 9.59.16.60 255.255.252.0 name "ZTESUBNET" voipendconfigureip route 9.0.0.0 255.0.0.0 9.59.16.1 name "ZTEROUTE"ip route 0.0.0.0 0.0.0.0 10.95.24.1 name "OAMRoute"ip dhcp-client option60 version V1.1.0P1T3login-authentication-type local endconfigure interface fei_0/2/1 switchport default vlan 1081 endconfigure interface fei_0/2/2 switchport default vlan 1082 endconfigure interface fei_0/2/4 switchport default vlan 1084 endconfigure interface fei_0/2/5 switchport default vlan 1085 endconfigure interface fei_0/2/6 switchport default vlan 1086 endconfigure interface fei_0/2/7 switchport default vlan 1087 endconfigure interface fei_0/2/8 switchport default vlan 1088 endconfigure interface fei_0/2/9 switchport default vlan 1089 endconfigure interface fei_0/2/10 switchport default vlan 1090 endconfigure interface fei_0/2/11 switchport default vlan 1091 endconfigure interface fei_0/2/12 switchport default vlan 1092 endconfigure interface fei_0/2/13 switchport default vlan 1093 endconfigure interface fei_0/2/14 switchport default vlan 1094 endconfigure interface fei_0/2/15 switchport default vlan 1095 endconfigure interface fei_0/2/16 switchport default vlan 1096 endconfigure vlan 1081addport fei_0/2/1 untagendconfigure vlan 1082addport fei_0/2/2 untagendconfigure vlan 1083addport fei_0/2/3 untagendconfigure vlan 1084addport fei_0/2/4 untagendconfigure vlan 1085addport fei_0/2/5 untagendconfigure vlan 1086addport fei_0/2/6 untagendconfigure vlan 1087addport fei_0/2/7 untagendconfigure vlan 1088addport fei_0/2/8 untagendconfigure vlan 1089addport fei_0/2/9 untagendconfigure vlan 1090addport fei_0/2/10 untag endconfigure vlan 1091addport fei_0/2/11 untag endconfigure vlan 1092addport fei_0/2/12 untag endconfigure vlan 1093addport fei_0/2/13 untag endconfigure vlan 1094addport fei_0/2/14 untagendconfigure vlan 1095 addport fei_0/2/15 untag endconfigure vlan 1096 addport fei_0/2/16 untag endconfigure vlan 51addport gei_0/3/1 tag endconfigure vlan 55addport gei_0/3/1 tag endconfigure vlan 1081 addport gei_0/3/1 tag endconfigure vlan 1082 addport gei_0/3/1 tag endconfigure vlan 1083 addport gei_0/3/1 tag endconfigure vlan 1084 addport gei_0/3/1 tag endconfigure vlan 1085 addport gei_0/3/1 tag endconfigure vlan 1086 addport gei_0/3/1 tag endconfigure vlan 1087 addport gei_0/3/1 tag endconfigure vlan 1088 addport gei_0/3/1 tag endconfigure vlan 1089 addport gei_0/3/1 tag endconfigure vlan 1090 addport gei_0/3/1 tag endconfigure vlan 1091addport gei_0/3/1 tagendconfigure vlan 1092addport gei_0/3/1 tagendconfigure vlan 1093addport gei_0/3/1 tagendconfigure vlan 1094addport gei_0/3/1 tagendconfigure vlan 1095addport gei_0/3/1 tagendconfigure vlan 1096addport gei_0/3/1 tag10.95.16.60-YZOLT-GQSZJ-F822(ag)# show vlan summary All created vlan number : 19Details are following :1,51,55,1081-109610.95.16.60-YZOLT-GQSZJ-F822(ag)# show vlan 1081id : 1081name : VLAN1081port(untagged):fei_0/2/1port(tagged) :gei_0/3/110.95.16.60-YZOLT-GQSZJ-F822(ag)# show vlan 55id : 55name : VLAN55port(untagged):port(tagged) :gei_0/3/110.95.16.60-YZOLT-GQSZJ-F822(ag)# h248sH248-SS link status(H248Trkplink) : Break10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-voip-configmgid: 1type: mediaipaddr: 9.59.16.60submask: 255.255.252.0nexthop: 9.59.16.1port: 10000-------------------------------------------------------------------------------- mgid: 1type: controlipaddr: 9.59.16.60submask: 255.255.252.0nexthop: not configport: 2944-------------------------------------------------------------------------------- 2 rows are effected10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-mgc mgcid 1MGCID: 1MGCTYPE: 1MGCIP: 9.32.2.10MGCPORT: 2944DOMNAME: LHPON9.59.16.60-SBCMGCINFO: USE DOMAINMD5INFO: 0-------------------------------------------------------------------------------- 1 rows are effected10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-slctermid slot 3 DB: Domain error10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-slctermid slot 1 slot 1circuit: 0termid: USER000mgid: 1--------------------------------------------------------------------------------termid: USER001mgid: 1-------------------------------------------------------------------------------- circuit: 2termid: USER002mgid: 1-------------------------------------------------------------------------------- circuit: 3termid: USER003mgid: 1-------------------------------------------------------------------------------- circuit: 4termid: USER004mgid: 1-------------------------------------------------------------------------------- circuit: 5termid: USER005mgid: 1-------------------------------------------------------------------------------- circuit: 6termid: USER006mgid: 1-------------------------------------------------------------------------------- circuit: 7termid: USER007mgid: 1-------------------------------------------------------------------------------- circuit: 8termid: USER008mgid: 1-------------------------------------------------------------------------------- circuit: 9termid: USER009mgid: 1-------------------------------------------------------------------------------- circuit: 10termid: USER010mgid: 1-------------------------------------------------------------------------------- circuit: 11termid: USER011mgid: 1--------------------------------------------------------------------------------termid: USER012mgid: 1-------------------------------------------------------------------------------- circuit: 13termid: USER013mgid: 1-------------------------------------------------------------------------------- circuit: 14termid: USER014mgid: 1-------------------------------------------------------------------------------- circuit: 15termid: USER015mgid: 1-------------------------------------------------------------------------------- circuit: 16termid: USER016mgid: 1-------------------------------------------------------------------------------- circuit: 17termid: USER017mgid: 1-------------------------------------------------------------------------------- circuit: 18termid: USER018mgid: 1-------------------------------------------------------------------------------- circuit: 19termid: USER019mgid: 1-------------------------------------------------------------------------------- circuit: 20termid: USER020mgid: 1-------------------------------------------------------------------------------- circuit: 21termid: USER021mgid: 1-------------------------------------------------------------------------------- circuit: 22termid: USER022mgid: 1--------------------------------------------------------------------------------termid: USER023mgid: 1-------------------------------------------------------------------------------- 24 rows are effected10.95.16.60-YZOLT-GQSZJ-F822(ag)#Error: Bad command10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-ipsstatus idlenum 32 busynum 0 blocknum 0circuit status0 IDLE1 IDLE2 IDLE3 IDLE4 IDLE5 IDLE6 IDLE7 IDLE8 IDLE9 IDLE10 IDLE11 IDLE12 IDLE13 IDLE14 IDLE15 IDLE16 IDLE17 IDLE18 IDLE19 IDLE20 IDLE21 IDLE22 IDLE23 IDLE24 IDLE25 IDLE26 IDLE27 IDLE28 IDLE29 IDLE30 IDLE31 IDLE32 rows are effected10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-slcstatusidlenum 0 busynum 0 blocknum 0circuit status1-0 IDLE1-1 IDLE1-2 IDLE1-3 IDLE1-4 IDLE1-5 IDLE1-6 IDLE1-7 IDLE1-8 IDLE1-9 IDLE1-10 IDLE1-11 IDLE1-12 IDLE1-13 IDLE1-14 IDLE1-15 IDLE1-16 POWEROFF|FAULT 1-17 POWEROFF|FAULT 1-18 POWEROFF|FAULT 1-19 POWEROFF|FAULT 1-20 POWEROFF|FAULT 1-21 POWEROFF|FAULT 1-22 POWEROFF|FAULT 1-23 POWEROFF|FAULT24 rows are effected10.95.16.60-YZOLT-GQSZJ-F822(ag)# get-slcstatus beginslot 1idlenum 0 busynum 0 blocknum 0circuit status1-0 IDLE1-1 IDLE1-2 IDLE1-3 IDLE1-4 IDLE1-5 IDLE1-6 IDLE1-7 IDLE1-8 IDLE1-9 IDLE1-10 IDLE1-11 IDLE1-12 IDLE1-13 IDLE1-14 IDLE1-15 IDLE1-16 POWEROFF|FAULT 1-17 POWEROFF|FAULT 1-18 POWEROFF|FAULT 1-19 POWEROFF|FAULT 1-20 POWEROFF|FAULT 1-21 POWEROFF|FAULT 1-22 POWEROFF|FAULT 1-23 POWEROFF|FAULT24 rows are effected。

华为onu配置脚本及解释和一些常用命令

注册onu 有2 个步骤rootadminenableconfig第一个步骤，注册interface gpon 0/1 // 进入0机框1板位ont add 2 2 sn-auth 485754436D7FDA20 snmp ont-lineprofile-id 100 desc zhonglingmaoyiguangchuangzhengzh //添加onuont ipconfig 2 2 static ip-address 172.172.172.5 mask 255.255.255.0 vlan 2 priority 3 gateway 172.172.172.1 //给onu配置一个管理ip地址Quit // 退入0机框1板位service-port vlan 2 gpon 0/1/2 ont 2 gemport 2 multi-service user-vlan 2 rx-cttr 6 tx-cttr 6 //给该onu 透传管理vlan 2service-port vlan 3103 gpon 0/1/2 ont 2 gemport 0 multi-service user-vlan other-all rx-cttr 6 tx-cttr 6 //给onu透传外层业务 vlan 3103第二个步骤，给onu透传vlan和每个端口划分vlantelnet 172.172.172.5 //远程进入该onurootmduadminenableconfigvlan 1100-1107 smart //创建内层vlanyport vlan 1100-1107 0/0 1 //在onu的一光口透传业务vlanyport vlan 1100-1107 0/0 2 //在onu的二光口透传业务vlanyservice-port vlan 1100 eth 0/1/1 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1101 eth 0/1/2 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1102 eth 0/1/3 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1103 eth 0/1/4 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1104 eth 0/1/5 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1105 eth 0/1/6 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1106 eth 0/1/7 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6service-port vlan 1107 eth 0/1/8 multi-service user-vlan untagged rx-cttr 6 tx-cttr 6Save //保存配置。

当今EPON技术常用的命令总结

show running-config interface显示指定的接口的配置信息。
show interface vlan 显示指定Vlan 的配置和统计信息
save configuration保存当前配置文件
erase config-file 删除所有已经保存的配置信息
who显示连接到交换机的用户信息
登录用户名为admin，密码为greenway
show online-onu”查看所有在线的ONU的信息
show onu-list显示所有或指定 PON 端口下的ONU 列表或ONU 总数
show version可以显示设备的版本信息
screen lines<行数>可以设置终端每屏显示信息的行数。
onu 5/1/1 进入onu口
sync-file 同步
vlan dot1q_show 查看
mgt config save 保存ONU
mgt reset 在 onu模式下重启
mgt config clear 删除ONU里的全部内容
show onu information mac 显示ONU 的MAC地址
show onu-register authentication entry 显示 ONU 认证信息
show onu-register window pon 显示指定 PON 口的ONU 注册窗口设置
add onu 在 PON 端口下添加新的ONU
add onu-register authentication entry 在 PON 端口下添加新的ONU 认证信息
为<1-64>。

ONU常用命令（汇总）

查看ONU‎状态： R‎T RV-O‎N T::O‎N T-1-‎1-3-2‎-10；‎查OLT‎上ONU的‎版本:RT‎R V-ON‎T SWVE‎R::CO‎M:::A‎L L;‎重启LT板‎：INIT‎-SYS:‎:LT-1‎-1-2:‎::2; ‎‎‎‎init‎-sys：‎：lt-1‎-1-1：‎：：2；‎重启O‎N U：IN‎I T-SY‎S::ON‎T-1-1‎-2-4-‎10:::‎6;‎RTRV‎-PONF‎D BDYN‎A MIC:‎:PONV‎L AN-3‎999; ‎(T界面查‎看是否学‎到MAC)‎RT‎R V-PO‎N ARPE‎N T::P‎O NVLA‎N-118‎5 ()‎查看学‎下层vla‎n: sh‎o w vl‎a n sh‎u b-fd‎b 130‎1查光‎衰：REP‎T-OPS‎T AT-O‎P TICS‎::ONT‎-1-1-‎2-1-6‎;查‎看vlan‎透传：sh‎o w vl‎a n sh‎u b-po‎r t-vl‎a n-ma‎p透传：‎conf‎i gure‎vlan‎shub‎id 4‎001 m‎o de r‎e side‎n tial‎-brid‎g e‎c onfi‎g ure ‎v lan ‎s hub ‎i d 40‎01 eg‎r ess-‎p ort ‎l t:1/‎1/6c‎o nfig‎u re v‎l an s‎h ub ‎i d 40‎01 eg‎r ess-‎p ort ‎n etwo‎r k:1‎a dmin‎soft‎w are-‎m ngt ‎s hub ‎d atab‎a se s‎a ve‎各型号‎O NU最新‎版本24‎0E-P ‎ 3FE‎53216‎A OCB2‎92‎40G-A‎ 3F‎E5156‎0AHCA‎2516‎160 ‎ 3FE‎53052‎A HCA0‎3160‎E-P ‎3FE5‎3394A‎O CB15‎080E‎-Q ‎3FE53‎865AO‎C B19‎同型号‎O NU替换‎ED-O‎N T::O‎N T-1-‎1-6-1‎-1:::‎::OOS‎;ED-‎O NT::‎O NT-1‎-1-6-‎1-1::‎::SER‎N UM=A‎L CLF8‎A2B06‎B:IS;‎‎下行2‎M，上行2‎M,（结果‎详见附件）‎主要测试下‎行SET-‎O NTUN‎I CNTR‎L::ON‎T UNI-‎1-1-1‎-2-20‎-10-1‎::::C‎N TRLT‎Y PE=i‎p,IP1‎=2.25‎5.255‎.255,‎I P2=2‎.255.‎255.2‎54;下‎行1M，上‎行2M（结‎果详见附件‎）主要‎测试下行S‎E T-ON‎T UNIC‎N TRL:‎:ONTU‎N I-1-‎1-1-2‎-20-1‎0-1::‎::CNT‎R LTYP‎E=ip,‎I P1=1‎.255.‎255.2‎55,IP‎2=2.2‎55.25‎5.254‎;下行2‎M，上行1‎M（结果详‎见附件）‎主要测‎试上行SE‎T-ONT‎U NICN‎T RL::‎O NTUN‎I-1-1‎-1-2-‎20-10‎-1:::‎:CNTR‎L TYPE‎=ip,I‎P1=2.‎255.2‎55.25‎5,IP2‎=1.25‎5.255‎.254;‎下行2M‎，上行2M‎（结果详见‎附件）‎主要测试‎上行SE‎T-ONT‎U NICN‎T RL::‎O NTUN‎I-1-1‎-1-2-‎20-10‎-1:::‎:CNTR‎L TYPE‎=ip,I‎P1=2.‎255.2‎55.25‎5,IP2‎=2.25‎5.255‎.254;‎160e‎p端口限速‎查‎看ONT的‎b it e‎r ror，‎通过下面命‎令：查‎误码的‎R EPT-‎O PSTA‎T-PON‎::PON‎-1-1-‎2-2::‎:noRE‎S ET;E‎x ampl‎e res‎p onse‎:PON‎-1-1-‎1-1 :‎X,Y,Z‎,[RAN‎G ED/N‎O TRAN‎G ED]W‎h ere ‎X=ONT‎#, Y=‎D owns‎t ream‎Bit ‎E rror‎s, Z=‎U pstr‎e am B‎i t Er‎r ors‎查看‎上行mac‎，如下操作‎先进入c‎l i界面，‎再teln‎e t sh‎u bro‎o tad‎m in12‎3/# ‎c d te‎s tabi‎l ity‎/test‎a bili‎t y# b‎c m-cl‎i 0 "‎f p en‎t ry r‎e move‎800"‎bcm_‎f ield‎_entr‎y_rem‎o ve(u‎n it=0‎) oka‎y/te‎s tabi‎l ity#‎ bcm‎-cli ‎1 "fp‎entr‎y rem‎o ve 8‎00"/t‎e stab‎i lity‎#bcm‎_fiel‎d_ent‎r y_re‎m ove(‎u nit=‎1) ok‎a y/t‎e stab‎i lity‎# BCM‎.1>‎查看外‎层VLAN‎RTRV‎-PONV‎L AN::‎A LL;‎常用命‎令:i‎n fo c‎o nfig‎u re v‎l an s‎h ub i‎d‎‎查看管‎理inf‎o con‎f igur‎e bri‎d ge-s‎h ub p‎o rti‎n fo c‎o nfig‎u re i‎n terf‎a ce s‎h ub p‎o rt 1‎‎‎看上联‎口sho‎w vla‎n shu‎b-por‎t-vla‎n-map‎‎‎‎验证‎管理vla‎n是否配‎置正确‎c onfi‎g ure ‎i nter‎f ace ‎s hub ‎p ort ‎1 no ‎p ort-‎t ype ‎删除端口‎1sho‎w vla‎n shu‎b-por‎t-vla‎n-map‎‎‎‎查看‎v lan端‎口对应关系‎show‎vlan‎shub‎-fdb ‎‎‎‎‎‎查看sh‎u b学习的‎m ac地址‎show‎inte‎r face‎shub‎port‎‎‎‎查‎看各端口状‎态con‎f igur‎e int‎e rfac‎e shu‎b por‎t 1 m‎o de 1‎g bps:‎f ull ‎（强‎制端口）‎c onfi‎g ure ‎i nter‎f ace ‎s hub ‎p ort ‎1 mod‎e aut‎o‎‎（自适应）‎info‎conf‎i gure‎rstp‎‎‎查看捆绑‎连路in‎f o co‎n figu‎r e la‎-agg-‎p ort‎s how ‎i nter‎f ace ‎s hub ‎p ort‎s how ‎l a ag‎g rega‎o r-in‎f oin‎f o co‎n figu‎r e vl‎a n sh‎u b 87‎deta‎i l ‎查看vl‎a n详细配‎置inf‎o con‎f igur‎e vla‎n shu‎b 87 ‎f lat ‎查看‎v lan一‎般配置‎RTRV‎-PONV‎L AN::‎P ONVL‎A N-13‎20；‎查‎看VLAN‎1320使‎用DHCP‎还是PPP‎O E RT‎R V-PO‎N FDBD‎Y NAMI‎C::PO‎N VLAN‎-1320‎;查看‎V LAN1‎320学到‎的用户MA‎C地址R‎T RV-P‎O NARP‎E NT::‎P ONVL‎A N-13‎20; ‎查‎看VLAN‎1320下‎用户获得的‎I PR‎T RV-P‎O NVLA‎N PLIS‎T::AL‎L; ‎查看‎所有VLA‎N对应端口‎IN‎I T-SY‎S::ON‎Y-1-1‎-1:::‎6‎重启O‎N U，6表‎示RE‎P T-OP‎S TAT-‎O PTIC‎S::ON‎T-1-1‎-1-1；‎查看ONU‎光衰R‎E PT-O‎P STAT‎-EQPT‎::NT&‎L T-1-‎1-1&&‎-4；查看‎O LT温度‎‎‎。

ONU故障排查常用命令

1.查询Onu是否在线：①根据ONU mac地址查询display onuinfo mac-address 3822-d69f-f2d5②根据用户机顶盒IP或者Mac地址查询：display arp 10.240.77.229（机顶盒IP地址）display mac-address 208b-3774-4e1d （机顶盒或者路由器mac地址）2.ONU上下线记录查询（V5版本）display onu-event interface Onu 0/0/12:1ONU上下线记录查询（V7版本）display epon onu-event interface onu 3/0/1:20注：通过查询ONU近期是否有频繁上下线的情况，判断是否会造成用户掉线。

3.查询ONU是否有丢包：注：错误包数据可能是历史积累下来的，可间隔30秒看一下错误包有没有增加。

如果短时间内错误包增加较多，会影响用户互动、上网。

可进一步排查光功率或更换onu。

（但也不排除OLT端口故障，或同一个OLT端口下其它故障ONU会造成此情况）4.OLT光功率查询display transceiver diagnosis interface Olt 0/0/16ONU光功率查询display transceiver diagnosis interface Onu 0/0/16:1一般OLT端口发光功率为4dBm左右，接收光功率大于-32dBmONU收光功率应该大于-24dBm（建议onu接收光功率大于-20dBm），发光功率大于1dBm。

5.查询ONU上网线口是否UP，端口是否有丢包：[ChengHe_7610]interface onu0/0/13:6[ChengHe_7610-Onu0/0/13:6]display uni 1与片区经理核对设备接在哪个端口上，并检查该端口配置是否正确，是否UP状态，是否有错误包，城域网ONU第1、2、4口可接EOC头端，3口接光机网管。

ONU常用查看命令

C300 C220 是一样的LC-shengpinglu#sho card /查看单板状态Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status-------------------------------------------------------------------------------1 1 0 PRWG PRWG 0 INSERVICE1 12 ETGO ETGOB 8 090500 V1.2.0 INSERVICE1 1 3 ETGO ETGOB 8 090500 V1.2.0 OFFLINE1 1 10 SCXM SCXM 0 090700 V1.2.0 HWONLE1 1 11 SCXM SCXM 0 090700 V1.2.0 INSERVICE1 1 18 CICG CICG 0 090300 V1.2.0 INSERVICE1 1 19 GUFQ GUFQ 4 090200 V1.2.0 INSERVICELC-shengpinglu#sho version-running /sho version-saved master查看版本PhyLoc FileType VerType VerTag BuildTime VerLenth--------------------------------------------------------------------------------1/1/2 ETGO MVR V1.2.0 2011-01-19 04:47:25 4284836 1/1/2 ETGOB BT V1.0.0P1 2010-07-01 13:44:03 306288 1/1/3 ETGO MVR V1.2.0 2011-01-19 04:47:25 4284836 1/1/3 ETGOB BT V1.0.0P1 2010-07-01 13:44:03 306288 1/1/10 SCXM MVR V1.2.0 2011-01-19 04:23:42 8136167 1/1/10 SCXM BT V1.0.0P1 2010-08-19 08:56:51 444176 1/1/11 SCXM MVR V1.2.0 2011-01-19 04:23:42 81361671/1/11 SCXM BT V1.0.0P1 2010-08-19 08:56:51 4441761/1/18 CICG MVR V1.2.0 2011-01-19 05:19:17 4893541/1/18 CICG BT V1.0.0P1 2010-06-30 11:01:19 3109441/1/19 GUCD MVR V1.2.0 2011-01-19 05:15:58 5531591/1/19 GUCD BT V1.0.0P1 2010-12-29 11:08:30 302384LC-shengpinglu#sho onu all-status epon-olt_1/2/1 /查看ONU运行状态Onu Interface Regstatus Status .......................................................epon-onu_1/2/1:1 authenticated Onlineepon-onu_1/2/1:2 authenticated offlineepon-onu_1/2/1:3 authenticated Onlineepon-onu_1/2/1:4 authenticated Onlineepon-onu_1/2/1:5 authenticated Onlineepon-onu_1/2/1:6 authenticated OnlineQDSB-HEZY-ZXC220-O1#sho onu unauthentication epon-olt_0/6/4 /显示未注册设备QDSB-HEZY-ZXC220-O1#sho onu unauthentication epon-olt_0/6/4Onu Interface : epon-onu_0/6/4:1Onu Model : ZTE-F411MAC Address : 00d0.d05a.0f07SN : 00D0D05A0F07LOID : 00D0D05A0F07Online State : authentication denyExtOam State : completeSoftware Version : V2.0.0P1T9HHardware Version : V1.0RegTime : 2013/12/06 05:35:17QDSB-HEZY-ZXC220-O1#sho pon onu uncfg loid /显示未注册设备LOID OnuIndex LOID-------------------------------------------------------------------------epon-onu_0/6/4:1 00D0D05A0F07QDSB-HEZY-ZXC220-O1#show pon power olt-tx epon-olt_0/1/1 /显示OLT的发光功率Tx power: 4.723(dbm)QDSB-HEZY-ZXC220-O1#sho pon power onu-rx epon-onu_0/1/1:5 /显示ONU的收光功率Rx power: 0.000(dbm)LC-shengpinglu#sho vlan-smart-qinq /查看QINQsmart-qinq item num(used): 45Ingress-Port Begin-Cvlan End-Cvlan Ether-Type Cos Svlan NewCos Error--------------------------------------------------------------------------------epon-olt_1/3/1 2001 4000 ---- -- 1157 -- OKepon-olt_1/3/2 2001 4000 ---- -- 1157 -- OKepon-olt_1/3/3 2001 4000 ---- -- 1157 -- OKepon-olt_1/3/4 2001 4000 ---- -- 1157 -- OKepon-olt_1/3/1 50 50 ---- -- 1157 -- OKepon-olt_1/3/2 50 50 ---- -- 1157 -- OKepon-olt_1/3/3 50 50 ---- -- 1157 -- OKepon-olt_1/3/4 50 50 ---- -- 1157 -- OKepon-olt_1/3/1 2000 2000 ---- -- 1158 -- OKLC-shengpinglu#sho running-config interface epon-onu_1/2/1:1 /查看ONU使能情况及端口限速Building configuration...!interface epon-onu_1/2/1:1admin enablesla upstream fixed 0 fixedpkt 64 assured 150000 maximum 200000 maxburst 450 00 priority 0 vport 1sla downstream maximum 200000 vport 1encrypt direction downstream enable vport 1ems-autocfg-request disableswitchport mode hybrid vport 1QDSB-HEZY-ZXC220-O1#sho onu running config epon-onu_0/1/1:7 /显示ONU的远程下发数据!pon-onu-mng epon-onu_0/1/1:7auto-configmgmt-ip 10.201.26.8 255.255.255.0 vlan 50 priority 7 route 221.0.0.0 255.0.0.0 1 0.201.26.1 status enablevlan port eth_0/1 mode tag vlan 2516 priority 0vlan port eth_0/2 mode tag vlan 2517 priority 0vlan port eth_0/3 mode tag vlan 2518 priority 0vlan port eth_0/4 mode tag vlan 2519 priority 0!Show remote epon onu info epon-onu_1/2/1:1 /显示ONU的远程信息epon-onu_0/1/1:7Onu vendorId ZTE .Onu type ZTE-D420.OnuModel D420.OnuId 001e.73e4.b304.Hardware version D420V2.Software version D420V2.0.0P8T2.Firmware version 1.4.a(HEX).Chip vendorId PMC. ChipModel 0x6301.Chip revison 0 . ChipDesignDate 07/05/28. Number of Ge port 0 . GePort .Number of Fe port 4 . FePort 1-4.Number of POTS port 2.Number of E1 port 0.Number of US Queues 4.Max queues per US port 4.Number of DS Queues 4.Max queues per DS port 4.BatteryBackup no.Multicast protocol igmpsnooping.FecMode disable. FecAbility support. Alarm enable. Port Isolation enable.Mac aging-time 300.IPV6 N/A.GPONZhongXinJiFangC300#sho cardRack Shelf Slot CfgType RealType Port HardVer SoftVer Status-------------------------------------------------------------------------------1 1 0 PRWG PRWG 0 INSERVICE 1 1 1 PRWG PRWG 0 NOPOWER 1 12 GTGO GTGOE 8 110300 V1.2.3P3 INSERVICE 1 1 3 GTGO GTGOE 8 110300 V1.2.3P3 INSERVICE 1 14 GTGO GTGOE 8 110301 V1.2.3P3 INSERVICE 1 15 GTGO GTGOE 8 110301 V1.2.3P3 INSERVICE 1 16 GTGO GTGOE 8 110301 V1.2.3P3 INSERVICE 1 17 GTGO GTGOE8 110301 V1.2.3P3 INSERVICE 1 1 10 SCXM SCXM 0 090700 V1.2.3P3 INSERVICE 1 1 11 SCXM SCXM 0 090700 V1.2.3P3 STANDBY 1 1 19 GUFQ GUFQ 4 090200 V1.2.3P3 INSERVICEZhongXinJiFangC300#sho gpon onu state gpon-olt_1/2/1 /显示GPON ONU 状态OnuIndex Admin State OMCC State O7 State Phase State ----------------------------------------------------------------------------gpon-onu_1/2/1:1 enable enable operation workinggpon-onu_1/2/1:2 enable disable unknown DyingGasp gpon-onu_1/2/1:3 enable enable operation working gpon-onu_1/2/1:4 enable disable unknown OffLine gpon-onu_1/2/1:5 enable disable unknown LOS ONU Number: 2/5ZhongXinJiFangC300#sho gpon onu uncfg /显示未注册设备ZhongXinJiFangC300#sho gpon onu uncfg%Code 32310-GPONSRV : No related information to show.QDSB-HEZY-ZXC220-O1#sho pon onu uncfg loid /显示未注册设备LOID OnuIndex LOID-------------------------------------------------------------------------epon-onu_0/6/4:1 00D0D05A0F07ZhongXinJiFangC300#sho running-config interface gpon-onu_1/2/1:1 Building configuration...!interface gpon-onu_1/2/1:1 /查看ONU的service portdescription t532ftth150026sn-bind disabletcont 1 name Tl1DefaultCreate profile defaultgemport 1 name Tl1DefaultCreate unicast tcont 1 dir both queue 1encrypt 1 enableswitchport mode hybrid vport 1service-port 1 vport 1 user-vlan untag vlan 301 svlan 301service-port 1 description TL1Create!endZhongXinJiFangC300#sho onu running config gpon-onu_1/2/1:1 /显示远程下发数据pon-onu-mng gpon-onu_1/2/1:1service Tl1OpVlan0 gemport 1vlan port eth_0/1 mode transparent!ZhongXinJiFangC300#sho cpe information gpon-olt_1/2/1 2 /显示ONU的远程信息gpon-onu_1/2/1: 2CpeVendorName : ZTEGCpeType : F601Region 1Vertag : V2.11.00P3T1Commited : YesActivated : YesValid : YesRegion 2Vertag : V2.11.00P3T1Commited : NoActivated : NoValid : YesF821 F822 9806 查看命令都是一样的，只是需要查看的槽位有些差别。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

常用命令:
info configure vlan shub id 查看管理
info configure bridge-shub port
info configure interface shub port 1 看上联口
show vlan shub-port-vlan-map 验证管理vlan 是否配置正确
info configure vlan shub 87 flat 查看vlan一般配置
RTRV-PONVLAN::PONVLAN-1320；查看VLAN1320使用DHCP还是PPPOE
RTRV-PONFDBDYNAMIC::PONVLAN-1320; 查看VLAN1320学到的用户MAC地址
info configure rstp 查看捆绑连路
info configure la-agg-port
show interface shub port
show la aggregaor-info
info configure vlan shub 87 detail 查看vlan详细配置
REPT-OPSTAT-PON::PON-1-1-2-2:::noRESET;Example response:
PON-1-1-1-1 :X,Y,Z,[RANGED/NOTRANGED]Where X=ONT#, Y=Downstream Bit Errors, Z=Upstream Bit Errors
080E-Q 3FE53865AOCB19
同型号ONU替换
ED-ONT::ONT-1-1-6-1-1:::::OOS;
ED-ONT::ONT-1-1-6-1-1::::SERNUM=ALCLF8A2B06B:IS;
下行2M，上行2M,（结果详见附件）主要测试下行SET-ONTUNICNTRL::ONTUNI-1-1-1-2-20-10-1::::CNTRLTYPE=ip,IP1=2.255.255.255,IP2=2.255.255.254;
下行2M，上行2M（结果详见附件）主要测试上行 SET-ONTUNICNTRL::ONTUNI-1-1-1-2-20-10-1::::CNTRLTYPE=ip,IP1=2.255.255.255,IP2=2.255.255.254;
160ep端口限速
查看ONT的bit error，通过下面命令：查误码的
查看上行mac，如下操作
先进入cli界面，再telnet shub
root
admin123
/# cd testability
/testability# bcm-cli 0 "fp entry remove 800"
bcm_field_entry_remove(unit=0) okay
show interface shub port 查看各端口状态
configure interface shub port 1 mode 1gbps:full （强制端口）
configure interface shub port 1 mode auto （自适应）
configure interface shub port 1 no port-type 删除端口1
show vlan shub-port-vlan-map 查看vlan端口对应关系
show vlan shub-fdb 查看shub学习的mac地址
查看vlan透传：show vlan shub-port-vlan-map
透传：
configure vlan shub id 4001 mode residential-bridgቤተ መጻሕፍቲ ባይዱ
configure vlan shub id 4001 egress-port lt:1/1/6
configure vlan shub id 4001 egress-port network:1
RTRV-PONFDBDYNAMIC::PONVLAN-3999; (T界面查看是否学到MAC)
RTRV-PONARPENT::PONVLAN-1185 ()
查看学下层vlan: show vlan shub-fdb 1301
查光衰：REPT-OPSTAT-OPTICS::ONT-1-1-2-1-6;
/testability# bcm-cli 1 "fp entry remove 800"/testability#
bcm_field_entry_remove(unit=1) okay
/testability# BCM.1>
查看外层VLAN
RTRV-PONVLAN::ALL;
REPT-OPSTAT-EQPT::NT&LT-1-1-1&&-4；查看OLT温度
admin software-mngt shub database save
各型号ONU最新版本
240E-P 3FE53216AOCB29
240G-A 3FE51560AHCA25
16160 3FE53052AHCA03
160E-P 3FE53394AOCB15
下行1M，上行2M（结果详见附件）主要测试下行SET-ONTUNICNTRL::ONTUNI-1-1-1-2-20-10-1::::CNTRLTYPE=ip,IP1=1.255.255.255,IP2=2.255.255.254;
下行2M，上行1M（结果详见附件）主要测试上行SET-ONTUNICNTRL::ONTUNI-1-1-1-2-20-10-1::::CNTRLTYPE=ip,IP1=2.255.255.255,IP2=1.255.255.254;
RTRV-PONARPENT::PONVLAN-1320; 查看VLAN1320下用户获得的IP
RTRV-PONVLANPLIST::ALL; 查看所有VLAN对应端口
INIT-SYS::ONY-1-1-1:::6 重启ONU，6表示
REPT-OPSTAT-OPTICS::ONT-1-1-1-1；查看ONU光衰
查看ONU状态： RTRV-ONT::ONT-1-1-3-2-10；
查OLT上ONU的版本:RTRV-ONTSWVER::COM:::ALL;
重启LT板：INIT-SYS::LT-1-1-2:::2; init-sys：：lt-1-1-1：：：2；
重启ONU：INIT-SYS::ONT-1-1-2-4-10:::6;