模切行业专用名词中英文对照

合集下载

模切专业术语

模切专业术语

模切----Die cutting刀具---tool平刀---Flatbed die圆刀---Rotary die精度---precision公差---tolerance圆刀模切---Rotary die cutting平刀模切---Flatbed die cutting激光模切---Laser die cutting刀座---station冲压---stamping印刷---printing喷漆---painting镀金属(法)---metallization数码装饰(法)---digital decoration碾压,层压---laminate分切---slit装配---Assembly嵌缝材料---Joint material保护膜---Protective Film粘结胶带---Bonding Adhesive Tape单面胶带---single-sided adhesive tape双面胶带---Double-coated Adhesive Tape防尘网---Dustproof Mesh泡棉---Foam金属箔膜---Metal foil film空间填补---Space Filling网孔冲压---Mesh Stamping按键板---Key Plate金属冲压件---Metal Punching Part塑胶薄膜类---Plastic Film低粘性保护膜---Low-adhesive protective film 静电---static厚度---thickness密度---density定制---customize基材---carrier硬度---rigidity透明色---transparent colorGlassine liner-----格钠辛底纸paper liner----纸离型膜Ployester liner-----PET离型膜Vacume die--真空刀Strip bar---剥刀Nip roller--胶辊Relaese tab---小耳朵Die cut----模切Flatbed die---平刀Rotary Die---圆刀Kiss cutting--半切Through cutting--全切ID slug---内框废料Waste matrix---外框废料Thermal bonding film-----热溶胶Polyester film----PET 膜Release liner---离型模Fine-tuning----微调Bi-level die----双层刀Stee rule die----平板刀Etch Die----蚀刻刀Male/femal die----公母模Engraving die----雕刻模Seek Pin---套位针Tension---张力Torque---扭力Slitting----分切Rewind----收料Unwind----放料机器名称1 大断机/裁断机2 全自动分切机3 精密复合机4 油压裁断机5 精密油压裁切机6 热压机7 圆磨刀床8 精密切卷机9 切片机10 排废切片机11 高速冲床12 高速精密模切机13 高速高精密模切机14 复合机15 多功能精密复合机16 排线收卷机17 自动流水线11.The fault / Cutting Machine2.Automatic Slitter3.Precision Machine Complex4.hydraulic cutting machine5.Precision hydraulic cutting machine6.Hot-press7.circular bed Brothers8.vol fine close -9. Slicing Machine10.row waste Slicing Machine11.high-speed presses12.high-speed precision die-cutting machine13.high-speed high-precision cutting machinebo15.precision machine composites16.line winding machine17.auto assembly line 1Thermal bonding film-----热溶胶Polyester film----PET 膜Release liner---离型模Fine-tuning----微调Bi-level die----双层刀Stee rule die----平板刀Etch Die----蚀刻刀Male/femal die----公母模Engraving die----雕刻模Seek Pin---套位针Tension---张力Torque---扭力Slitting----分切Rewind----收料Unwind----放料。

模具专业术语-中英文对照

模具专业术语-中英文对照

Female Die 母模(凹模) Binder Plate 压板
Flask 上箱
Upper Mold Plate 上模板 Blank Holder 防皱压板 Floating Punch 浮动冲头
Lower Mold Plate 下模板 Blanking Die 落料冲头 Gate 浇口
Die Pad 下垫板
Parting Line 分模线
滑块板
Upper Holder Block 上压 Ejector Guide Pin 顶出 Parting Lock Set 合模定

导梢
位器
Upper Mid Plate 上中间 Ejector Leader Bush 顶 Pass Guide 穴型导板

出导梢衬套
Die Button 冲模母模
Locating Center Punch
定位中心冲头
Die Clamper 夹模器
Locating Pilot Pin 定位
导梢
Die Fastener 模具固定用 Locating Ring 定位环
零件
Die Holder 母模固定板 Lock Block 压块
Roller 滚轴
Located Pin 定位销
Diaphragm Gate 盘形浇口 Knockout Bar 脱模杵
Outer Bush 外导套
Die Approach 模头料道 Land 合模平坦面
Punch 冲头
Die Bed 型底
Land Area 合模面
Insert 入块(嵌入件) Deburring Punch 压毛边 冲子 Groove Punch 压线冲子
Isoheight Sleeve 等高套 Cold Punched Nut 冷冲螺 Inlay Bush 嵌入衬套

(精编)模具注塑术语中英文对照

(精编)模具注塑术语中英文对照

(精编)模具注塑术语中英文对照(精编)模具注塑术语中英文对照根据国家标准,以下为部分塑料模具成形术语的标准翻译。

动模MovableMouldMovingHalf定模座板FixedClampPlateTopClampingPlateTopPlate动模座板MovingClampPlateBottomClampingPlateBottomPlate上模座板UpperClampingPlate下模座板LowerClampingPlate凹模固定板Cavity-retainerPlate 型芯固定板MouldCore-retainerPlate凸模固定板Punch-retainerPlate模套DieBodyDieSleeveDieBlank支承板BackingPlateSupportPlate垫块SpacerParallel支架EjectorHousingMouldBaseLeg模头DieHead模具分类8InjectionMold注塑模PlasticRubberMould塑胶模RubberMolding橡胶成形HotChamberDieCasting热室压铸SandMoldCasting砂模铸造ExtrusionMold挤出模Multi-CavityMold多模穴模具PalletizingDie叠层模PlasterMold石膏模ThreePlatesMold三板模PlainDie简易模PierceDie冲孔模FormingDie成型模ProgressiveDie连续模GangDies复合模ShearingDie剪边模CavityDie型腔模RivetingDie铆合模CompressionMolding压缩成型FlashMold溢流式模具ExtrusionMold挤压式模具SplitMold分割式模具MouldCavity型腔母模MoldCore模芯公模LargeDieMold大型模具PreciseDieMold 精密模具ComplexDieMold复杂模具FoamingMould发泡模具MetalDie金属模具PlasticMold塑料模具ToolStampingDiePunchDie冲压模具ExtrusionDie挤压模具GraphiteDie石墨模具流道浇口部分RunnerSystem浇道系统SprueColdMaterialTrap浇道冷料井SpruePuller拉杆RunnerDesign流道设计MainRunner主流道SecondaryRunner 次流道MouldGateDesign浇口设计SubmarineGate潜伏浇口TunnelGate隧道式浇口PinpointGate点浇口FanGate扇形浇口SideGate侧浇口EdgeGate侧缘浇口TabGate 搭接浇口FilmGate薄膜浇口FlashGate闸门浇口SlitGate缝隙浇口DishGate盘形浇口DiaphragmGate隔膜浇口RingGate环形浇口Runnerless无浇道Sprueless无射料管方式LongNozzle延长喷嘴方式Sprue浇口,溶渣Insulated/HotRunner热浇道RunnerPlat 浇道模块ValveGate阀门浇口SlagWell冷料井ColdSlag冷料渣SprueGate射料浇口Nozzle 射嘴SprueLockPin料头钩销(拉料杆)注塑缺陷Flash飞边Warpage翘曲AirTrap积风Blush发赤FlowLine流痕Splay银纹ShortShot 短射SinkMark缩痕Streak条纹Void缩孔WeldLine熔接线GasMark烧焦ColdSlug冷斑Delamination起皮Burr毛刺FlawScratch刮伤Gloss光泽Glazing光滑SurfaceCheck表面裂痕Hesitation迟滞注塑工艺MoldingConditions成型条件Drying烘干BarrelTemperature 料筒温度MeltTemperature熔化温度MoldTemperature模具温度InjectionPressure注塑压力BackPressure背压InjectionSpeed注塑速度ScrewSpeed螺杆转速TensileStrength抗拉强度T ensileElongation延伸率FlexuralModulus弯曲模FlexuralStrength抗弯强度Shrinkage收缩率RegrindUsage次料使用Moulding模塑机械设备Lathe车床Planer刨床Miller/MillingMachine铣床Grinder磨床Driller钻床LinearCutting线切割ElectricalSparkle电火花Welder电焊机PunchingMachine冲床Robot机械手CommonEquipment 常用设备EDMElectronDischargeMachining放电加工3DCoordinateMeasurement三次元量床BoringMachine搪孔机ContouringMachine轮廓锯床CopyGrindingMachine仿形磨床CylindricalGrindingMachine外圆磨床DieSpottingMachine合模机EngravingMachine 雕刻机EngravingE.D.M雕模放置加工机FormGrindingMachine成形磨床GraphiteMachine石墨加工机HorizontalBoringMachine卧式搪孔机HorizontalMachineCenter卧式加工制造中心InternalCylindricalMachine内圆磨床模具零件TopPlate上托板(顶板)T opBlock上垫脚PunchSet上模座PunchPad上垫板PunchHolder上夹板StripperPad脱料背板UpStripper上脱料板MaleDie公模(凸模)FeatureDie公母模FemaleDie母模(凹模)UpperMoldPlate上模板LowerMoldPlate 下模板DiePad下垫板DieHolder下夹板DieSet下模座BottomBlock下垫脚BottomPlate下托板(底板)StrippingPlate内外打(脱料板)OuterStripper外脱料板InnerStripper内脱料板LowerStripper下脱料板InnerGuidingPost 内导柱InnerHexagonScrew内六角螺钉DowelPin固定销MouldCoilSpring模具弹簧LifterPin 顶料销IsoheightSleeve等高套筒Pin销LifterGuidePin浮升导料销GuidePin导正销WireSpring圆线弹簧OuterGuidingPost外导柱StopScrew止付螺丝LocatedPin定位销OuterBush外导套Punch冲头Insert入块(嵌入件)DeburringPunch压毛边冲子GroovePunch压线冲子StampedPunch字模冲子RoundPunch圆冲子SpecialShapePunch 异形冲子BendingBlock折刀Roller滚轴BafflePlate挡块LocatedBlock定位块SupportingBlockforLocation定位支承块AirCushionPlate气垫板Air-CushionEject-rod 气垫顶杆TrimmingPunch切边冲子StiffeningRibPunchStinger加强筋冲子RibbonPunch压筋冲子Reel-stretchPunch卷圆压平冲子GuidePlate定位板SlidingBlock滑块SlidingDowelBlock滑块固定块ActivePlate活动板LowerSlidingPlate 下滑块板UpperHolderBlock上压块UpperMidPlate上中间板SpringBox弹簧箱Spring-BoxEject-rod弹簧箱顶杆Spring-BoxEjec模具技术用语各种常用模具成形方式AccurateDieCasting精密压铸PowderForming粉末成形CalendaringMolding压延成形PowderMetalForging粉末锻造ColdChamberDieCasting冷式压铸PrecisionForging 精密锻造ColdForging冷锻PressForgingstampforging冲锻CompactingMolding粉末压出成形RockingDieForging摇动锻造CompoundMolding复合成形RotaryForging回转锻造CompressionMolding压缩成形RotationalMolding离心成形DipMold浸渍成形RubberMolding橡胶成形EncapsulationMolding注入成形SandMoldCasting砂模铸造ExtrusionMolding挤出成形ShellCasting壳模铸造FoamForming 发泡成形SinterForging烧结锻造ForgingRoll轧锻SixSidesForging 六面锻造GravityCasting重力铸造SlushMolding凝塑成形HollowBlowMolding中空(吹出)成形SqueezeCasting高压铸造HotChamberDieCasting热室压铸Swaging挤锻HotForging 热锻TransferMolding转送成形InjectionMolding射出成形WarmForging温锻InvestmentCasting精密铸造MatchedDieMethod对模成形法LaminatingMethod被覆淋膜成形LowPressureCasting低压铸造LostWaxCasting脱蜡铸造MatchedMouldThermalForming对模热成形模CloseMold合模Demould脱模脱模剂MouldUnloading开模ToolChangeRetoolingDieChanging换模MouldClamping锁模各式模具分类用语BismuthMold铋铸模LandedPlungerMold有肩柱塞式模具BurnishingDie挤光模LandedPositiveMold有肩全压式模具ButtonDie镶入式圆形凹模LoadingShoeMold料套式模具Center-GatedMold中心浇口式模具LooseDetailMold活零件模具ChillMold冷硬用铸模LooseMold活动式模具ColdHobbing冷挤压制模法LouveringDie百叶窗冲切模CompositeDies复合模具ManifoldDie分歧管模具CounterPunch反凸模ModularMold组合模具DoubleStackMold双层模具Multi-CavityMold多模穴模具ElectroformedMold电铸成形模Multi-GateMold复式浇口模具ExpanderDie扩径模OffsetColdBendingDie双折冷弯模具ExtrusionDie挤出模PalletizingDie叠层模FamilyMold反套制品模具PlasterMold石膏模BlankThroughDies漏件式落料模PorousMold通气性模具DuplicatedCavityPlate复板模PositiveMold全压式模具FantailDie扇尾形模具PressureDie压紧模FishtailDie鱼尾形模具ProfileDie轮廓模FlashMold溢料式模具ProgressiveDie顺序模GypsumMold石膏铸模PortableMold手提式模具Hot-RunnerMold热流道模具PrototypeMold雏形试验模具原型模具IngotMold钢锭模PunchingDie落料模LancingDie切口模切缝模Raising(Embossing)压花起伏成形Re-entrantMold倒角式模具SectionalDie拼合模RunlessInjectionMold无流道冷料模具SectionalDie对合模具SegmentMold组合模Semi-PositiveMold半全压式模具Shaper 定型模套SingleCavityMold单腔模具SolidForgingDie整体锻模SplitForgingDie拼合锻模SplitMold双并式模具SpruelessMold无注道残料模具SqueezingDie挤压模StretchFormDie拉伸成形模SweepingMold 平刮铸模SwingDie振动模具ThreePlatesMold三片式模具TrimmingDie切边模UnitMold单元式模具UniversalMold 通用模具UnscrewingMold退扣式模具YokeTypeDie轭型模t-Plate弹簧箱顶板BushingBlockLinerBushing衬套CoverPlate盖板GuidePad导料块模具厂常用之标准零配件AirVentValve通气阀AnchorPin锚梢AngularPin角梢Baffle调节阻板AngularPin倾斜梢BafflePlate折流档板BallButton球塞套BallPlunger定位球塞BallSlider球塞滑块BinderPlate压板BlankHolder防皱压板BlankingDie落料冲头Bolster上下模板Bottomboard浇注底板Bolster垫板BottomPlate下固定板Bracket托架BumperBlock 缓冲块Buster堵口CastingLadle浇注包Castinglug铸耳Cavity模穴(模仁)CavityRetainerPlate模穴托板CenterPin中心梢ClampingBlock 锁定块CoilSpring螺旋弹簧ColdPunchedNut冷冲螺母CoolingSpiral螺旋冷却栓Core心型CorePin心型梢Cotter开口梢Cross十字接头CushionPin缓冲梢DiaphragmGate盘形浇口DieApproach模头料道DieBed型底DieBlock块形模体DieBody铸模座DieBush合模衬套DieButton冲模母模DieClamper夹模器DieFastener模具固定用零DieHolder母模固定板DieLip模唇DiePlate冲模板DieSet冲压模座DirectGate直接浇口DogChuck爪牙夹头Dowel定位梢DowelHole导套孔DowelPin合模梢Dozzle辅助浇口DowelPin定位梢Draft拔模锥度DrawBead张力调整杆DriveBearing传动轴承EjectionPad顶出衬垫Ejector脱模器EjectorGuidePin顶出导梢EjectorLeaderBush顶出导梢衬套EjectorPad顶出垫EjectorPin 顶出梢EjectorPlate顶出板EjectorRod顶出杆EjectorSleeve顶出衬套EjectorValve顶出阀EyeBolt环首螺栓FillingCore填充型芯椿入蕊FilmGate薄膜形浇口FingerPin指形梢FinishMachinedPlate 角形模板FinishMachinedRoundPlate圆形模板FixedBolsterPlate固定侧模板FlangedPin带凸缘针FlashGate毛边形浇口Flask上箱FloatingPunch浮动冲头Gate浇口GateLand浇口面Gib凹形拉紧楔GooseNeck鹅颈管GuideBushing引导衬套GuidePin导梢GuidePost 引导柱GuidePlate导板GuideRail导轨HeadPunch顶头冲孔HeadlessPunch直柄冲头HeavilyT aperedSolid整体模蕊盒HoseNippler管接头ImpactDamper缓冲器InjectionRam压射柱InlayBush嵌入衬套InnerPlunger内柱塞InnerPunch内冲头Insert 嵌件InsertPin嵌件梢KingPin转向梢KingPinBush主梢衬套KnockoutBar脱模杵Land 合模平坦面LandArea合模面LeaderBush导梢衬套LiftingPin起模顶针起模杆Lining内衬LocatingCenterPunch定位中心冲头LocatingPilotPin定位导梢LocatingRing定位环LockBlock压块LockingBlock定位块LockingPlate定位板LooseBush活动衬套MakingDie打印冲子ManifoldBlock歧管档块MasterPlate靠模样板MatchPlate分型板MoldBase塑胶模座MoldClamp铸模紧固夹MoldPlaten模用板MovingBolster换模保持装置MovingBolsterPlate可动侧模板OnePieceCasting整体铸件ParallelBlock平行垫块PartingLine 分模线PartingLockSet合模定位器PassGuide穴型导板PeenedHeadPunch镶入式冲头锤击强化冲头钻杆凸模PilotPin定位销导向销子PinGate针尖浇口Plate衬板PreExtrusionPunch顶挤冲头Punch冲头Puncher推杆PusherPin衬套梢Rack机架RappingRod起模杆Re-entrantMold凹入模RetainerPin嵌件梢RetainerPlate托料板ReturnPin回位梢RidingStripper浮动脱模器RingGate环型浇口Roller滚筒Runner流道RunnerEjectorSet流道顶出器RunnerLockPin流道拉梢ScrewPlug头塞SetScrew固定螺丝Shedder脱模装置Shim分隔片Shoe模座之上下模板Shoot流道ShoulderBolt肩部螺丝Skeleton骨架SlagRiser冒渣口Slide(SlideCore)滑块SlipJoint滑配接头SpacerBlock间隔块SpacerRing间隔环Spider模蕊支架Spindle主轴Sprue注道SprueBushing注道衬套SprueBushingGuide注道导套SprueLockBushing注道定位衬套SpruePuller注道拉料浇道推出杆注道残料顶销SpewLine合模线SquareKey方键SquareNut方螺帽SquareThread方螺纹LimitStopCollar限位套StopPin止动梢StopRing止动环Stopper定位停止梢StraightPin圆柱销StripperBolt脱料螺栓StripperBushing脱模衬套StripperPlate剥料板StrokeEndBlock行程止梢SubmarineGate潜入式浇口SupportPillar支撑支柱顶出支柱SupportPin支撑梢SupportingPlate托板SweepT emplate造模刮板TabGate辅助浇口TaperKey推拔键TaperPin拔锥梢锥形梢TeemingPouring浇注ThreeStartScrew 三条螺纹ThrustPin推力销TieBar拉杵TunnelGate隧道形浇口Vent通气孔WortlePlate拉丝模板模具常用之工作机械3DCoordinateMeasurement三次元量床BoringMachine搪孔机CNCMillingMachineCNC铣床ContouringMachine轮廓锯床CopyGrindingMachine仿形磨床CopyLathe仿形车床CopyMillingMachine仿形铣床CopyShapingMachine仿形刨床CylindricalGrindingMachine外圆磨床DieSpottingMachine合模机DrillingMachine钻孔机EngravingMachine雕刻机EngravingE.D.M 雕模放置加工机FormGrindingMachine成形磨床GraphiteMachine 石墨加工机HorizontalBoringMachine卧式搪孔机HorizontalMachineCenter卧式加工制造中心InternalCylindricalMachine内圆磨床JigBoringMachine冶具搪孔机JigGrindingMachine冶具磨床LapMachine研磨机MachineCenter加工制造中心MultiModelMiller靠磨铣床NCDrillingMachineNC钻床NCGrindingMachineNC磨床NCLatheNC车床NCProgrammingSystemNC程式制作系统Planer 龙门刨床ProfileGrindingMachine投影磨床ProjectionGrinder投影磨床RadialDrillingMachine旋臂钻床Shaper牛头刨床SurfaceGrinder平面磨床TryMachine试模机TurretLathe转塔车床UniversalToolGrindingMachine万能工具磨床VerticalMachineCenter立式加工制造中心WireE.D.M线割放电加工机入水Gate进入位GateLocation水口形式GateType大水口EdgeGate细水口Pin-pointGate水口大小GateSize转水口SwitchingRunnerGate唧嘴口径SprueDiameter流道MoldRunner热流道HotRunnerHotManifold温度控制器温控器ThermostatThermoregulatorsT emperatureController 热嘴冷流道HotSprueColdRunner 唧嘴直流DirectSprueGate圆形流道RoundFullHalfRunner流道电脑分析MoldFlowAnalysis流道平衡RunnerBalance热嘴HotSprue热流道板HotManifold发热管CartridgeHeater探针Thermocouples插头ConnectorPlug插座ConnectorSocket密封封料Seal运水WaterLine喉塞LinePlugThroatT aps喉管Tube塑胶管PlasticTube快速接头JiffyQuickConnectorQuickDisconnectCoupling 模具零件MoldComponents三板模3-PlateMold二板模2-PlateMold边钉导边LeaderPinGuidePin边司导套BushingGuideBushing中托司ShoulderGuideBushing中托边GuidePin顶针板EjectorRetainnerPlate托板SupportPlate螺丝Screw管钉DowelPin开模槽PlyBarScot内模管位CoreCavityinter-Lock顶针EjectorPin司筒EjectorSleeve司筒针EjectorPin推板EjectPlatePushPlateStripperPlate缩呵MovableCoreReturnCorePuller 扣机(尼龙拉勾)NylonLatchLock 斜顶Lifter模胚(架)MoldBase上内模CavityInsert下内模CoreInsert行位(滑块)Slide镶件Insert压座Wedge耐磨板油板WedgeWearPlate压条Plate撑头SupportPillar唧嘴SprueBushing挡板StopPlate定位圈LocatingRing锁扣Latch扣机PartingLockSet推杆PushBar栓打螺丝S.H.S.B顶板EjectorPlate活动臂LeverArm分流锥SprueSpreader分流板SpreaderPlate水口司Bush垃圾钉StopPin隔片Buffle弹弓柱SpringRod弹弓DieSpring中托司EjectorGuideBush中托边EjectorGuidePin镶针Pin销子DowelPin波子弹弓Ballcatch喉塞PipePlug锁模块LockPlate斜顶AnglefromPin斜顶杆AngleEjectorRod尼龙拉勾PartingLocks活动臂LeverArm复位键提前回杆EarlyReturnBar气阀Valves斜导边AnglePin术语Terms承压平面平衡PartingSurfaceSupportBalance模排气PartingLineVenting回针碰料位ReturnPinandCavityInterference 顶针碰运水WaterLineInterfereswithEjectorPin 料位出上下模PartfromCavith (Core)Side不准用镶件DoNotUse(CoreCavity)Insert 用铍铜做镶件UseBerylliumCopperInsert初步模图设计PreliminaryMoldDesign正式模图设计FinalMoldDesign弹弓压缩量SpringCompressedlength稳定性好GoodStabilityStable强度不够InsufficientRigidity均匀冷却EvenCooling扣模Sticking热膨胀ThermalExpansion公差Tolerance铜公(电极)CopperElectrode AirVentValve通气阀AnchorPin锚梢AngularPin角梢Baffle调节阻板AngularPin倾斜梢BafflePlate折流挡板BallButton球塞套BallPlunger定位球塞BallSlider球塞滑块BinderPlate压板BlankHolder防皱压板BlankingDie落料冲头Bolster上下模板BottomBoard浇注底板Bolster垫板BottomPlate 下固定板Bracket托架BumperBlock缓冲块Buster堵口CastingLadle浇注包CastingLug铸耳Cavity模腔模穴(模仁)CavityRetainerPlate模穴托板CenterPin中心梢ClampingBlock锁定块CoilSpring螺旋弹簧ColdPunchedNut冷冲螺母CoolingSpiral螺旋冷却栓。

最全模具行业术语英文翻译

最全模具行业术语英文翻译
牙孔:
hole for screw
行位槽:
slide scot/scot for slide
喷砂:
engraving
螺母:
Nuts screw:
螺杆
导套:
guide bushing
try out:
试模
配镶件
making inserts
装配:
assemble
晒纹:
texturing
运水孔:
hole for water line
弹簧复位
manifold
热流道板
draft
斜度
热唧嘴hot runner
Inserted
镶件模
行位(滑块):
slide
镶件:
insert
推板:
stripper plate
斜顶:
lifter
undercut倒扣/里面
Driller
钻床
flash披风
rib骨位一.
模具加工方法英语词汇四.
模具线切割放电加工相关英语词汇
顶料销
锁模块:
lock plate
斜顶:
lifters
Miller Milling Machine
铣床
快速接头:
jiffy quick connector plug/socker
Dowel Pin
定位梢
turnnel
隧道进浇
镶针
insert pin
排气槽: scot for venting
胶位: plastic
ball catch
喉塞: pipe plug
流道平衡:runner balance
斜顶杆:
angle ejector rod

模具专业的英语词汇大全

模具专业的英语词汇大全

WORD格式模具专业的英语词汇大全一、模具专业英语入水:gate进入位:gatelocation水口形式:gatetype大水口:edgegate细水口:pin-pointgate 水口大小:gatesize转水口:switchingrunner/gate唧嘴口径:spruediameter二、流道:runner热流道:hotrunner,hotmanifold热嘴冷流道:hotsprue/coldrunner:directspruegate圆形流道:round(full/halfrunnermoldflowanalysis流道平衡:runnerbalancehotsprue热流道板:hotmanifoldcartridgeheater探针:thermocouplesconnectorplug插座:connectorsocket/封料:seal三、运水:waterline喉塞:linelpug喉管:tube塑胶管:plastictube快速接头:jiffyquickconnectorplug/socker四、模具零件:moldcomponents三板模:3-platemold二板模:2-platemold/导边:leaderpin/guidepin边司/导套:bushing/guidebushingshoulderguidebushing中托边L:guidepinejectorretainnerplate托板:supportplatescrew管钉:dowelpinplybarscot内模管位:core/cavityinter-lockWORD格式ejectorpin司筒:ejectorsleeveejectorpin推板:stripperplatemovablecore,returncorecorepullernylonlatchlock斜顶:liftermoldbase上内模:cavityinsertcoreinsert行位(滑块):slideinsert压座/斜鸡:wedge/油板:wedgewearplate压条:plate:supportpillar唧嘴:spruebushingstopplate定位圈:locatingringlatch扣鸡:partinglocksetpushbar栓打螺丝:S.H.S.Beracuretun活动臂:leverarmspuresperader水口司:bushstoppin隔片:bufflespringrod弹弓:diespringejectorguidebush中托边:ejectorguidepinpin销子:dowelpinballcatch模具成形不良用语英汉对照aberration色差atomization?化bankmark?料纹bite咬入blackinghole涂料孔(铸疵)blackingscab涂料疤WORD格式blister起泡blooming起霜lowhole破孔blushing泛白bodywrinkle侧壁皱纹breaking-in冒口带肉bubble膜泡burnmark糊斑burr毛边camber翘曲cell气泡centerbuckle表面中部波皱check细裂痕checking龟裂chipping修整表面缺陷clamp-off铸件凹痕collapse塌陷colormottle色斑corrosion腐蚀crack裂痕crazing碎裂crazing龟裂deformation变形edge切边碎片edgecrack裂边fading退色fillerspeak填充料斑fissure裂纹flangewrinkle凸缘起皱flaw刮伤flowmark流痕galling毛边glazing光滑gloss光泽greasepits污斑grindingdefect磨痕haircrack发裂haze雾度incrustation水锈indentation压痕internalporosity内部气孔mismatch偏模mottle斑点necking缩颈WORD格式nick割痕orangepeel橘皮状表面缺陷overflow溢流peeling剥离pit坑pittingcorrosion点状腐蚀platemark模板印痕pock麻点pockmark痘斑resinstreak树脂流纹resinwear树脂脱落riding凹陷sagging松垂saponification皂化scar疤痕scrap废料scrapjam废料阻塞scratch刮伤/划痕scuffing深冲表面划伤seam裂痕shockline模口挤痕shortshot充填不足shrinkagepool凹孔sinkmark凹痕skininclusion表皮折叠straightening矫直streak条状痕surfacecheck表面裂痕surfaceroughening橘皮状表皮皱折surging波动sweatout冒汗torsion扭曲warpage翘曲waviness波痕webbing熔塌weldmark焊痕whitening白化wrinkle皱纹各式模具分类用语英汉对照landedplungermold有肩柱塞式模具burnishingdie挤光模landedpositivemold有肩全压式模具buttondie镶入式圆形凹模loadingshoemold料套式模具WORD格式center-gatedmold中心浇口式模具loosedetailmold活零件模具chillmold冷硬用铸模loosemold活动式模具clodhobbing冷挤压制模louveringdie百叶窗冲切模compositedies复合模具manifolddie分歧管模具counterpunch反凸模modularmold组合式模具doublestackmold双层模具multi-cavitymold多模穴模具electroformedmold电铸成形模multi-gatemold复式浇口模具expanderdie扩径模offswtbendingdie双折冷弯模具extrusiondie挤出模palletizingdie叠层模familymold反套制品模具plastermold石膏模blankthroughdies漏件式落料模porousmold通气性模具duplicatedcavityplate复板模positivemold全压式模具fantaildie扇尾形模具pressuredie压紧模fishtaildie鱼尾形模具profiledie轮廓模flashmold溢料式模具progressivedie顺序模gypsummold石膏铸模protablemold手提式模具hot-runnermold热流道模具prototypemold雏形试验模具ingotmold钢锭模punchingdie落料模lancingdie切口模raising(embossing)压花起伏成形re-entrantmold倒角式模具sectionaldie拼合模runlessinjectionmold无流道冷料模具sectionaldie对合模具segmentmold组合模semi-positivemold半全压式模具WORD格式shaper定型模套singlecavitymold单腔模具solidforgingdie整体锻模splitforgingdie拼合锻模splitmold双并式模具spruelessmold无注道残料模具squeezingdie挤压模stretchformdie拉伸成形模sweepingmold平刮铸模swingdie振动模具threeplatesmold三片式模具trimmingdie切边模unitmold单元式模具universalmold通用模具unscrewingmold退扣式模具yoketypedie轭型模各种模具常用成形方式英汉对照accuratediecasting精密压铸powderforming粉末成形calendaringmolding压延成形powdermetalforging粉末锻造coldchamberdiecasting冷式压铸precisionforging精密锻造coldforging冷锻pressforging冲锻compactingmolding粉末压出成形rockingdieforging摇动锻造compoundmolding复合成形rotaryforging回转锻造compressionmolding压缩成形rotationalmolding离心成形dipmold浸渍成形rubbermolding橡胶成形encapsulationmolding注入成形sandmoldcasting砂模铸造extrusionmolding挤出成形shellcasting壳模铸造foamforming?泡成形sinterforging烧结锻造forgingroll轧锻sixsidesforging六面锻造gravitycasting重力铸造slushmolding凝塑成形hollow(blow)molding中空(吹出)成形WORD格式squeezecasting高压铸造hotchamberdiecasting热室压铸swaging挤锻hotforging热锻transfermolding转送成形injectionmolding射出成形warmforging温锻investmentcasting精密铸造matcheddiemethod对模成形法laminatingmethod被覆淋膜成形lowpressurecasting低压铸造lostwaxcasting脱蜡铸造matchedmouldthermalforming对模热成形模机械类常用英语:冲压模具-零件类punch冲头insert入块(嵌入件)deburringpunch压毛边冲子groovepunch压线冲子stampedpunch字模冲子roundpunch圆冲子specialshapepunch异形冲子bendingblock折刀roller滚轴baffleplate挡块locatedblock定位块supportingblockforlocation定位支承块aircushionplate气垫板air-cushioneject-rod气垫顶杆trimmingpunch切边冲子stiffeningribpunch=stinger加强筋冲子ribbonpunch压筋冲子reel-stretchpunch卷圆压平冲子guideplate定位板slidingblock滑块slidingdowelblock滑块固定块activeplate活动板lowerslidingplate下滑块板upperholderblock上压块uppermidplate上中间板springbox弹簧箱spring-boxeject-rod弹簧箱顶杆spring-boxeject-plate弹簧箱顶板bushingbolck衬套WORD格式coverplate盖板guidepad导料块机械类常用英语:冲压模具-模板类topplate上托板(顶板)topblock上垫脚punchset上模座punchpad上垫板punchholder上夹板stripperpad脱料背板upstripper上脱料板maledie公模(凸模)featuredie公母模femaledie母模(凹模)upperplate上模板lowerplate下模板diepad下垫板dieholder下夹板dieset下模座bottomblock下垫脚bottomplate下托板(底板)strippingplate内外打(脱料板)outerstripper外脱料板innerstripper内脱料板lowerstripper下脱料板冲压模具-冲压名称类英汉对照plaindie简易模piercedie冲孔模formingdie成型模progressivedie连续模gangdies复合模shearingdie剪边模rivetingdie铆合模pierce冲孔forming成型(抽凸,冲凸)drawhole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stampmark冲记号deburrorcoin压毛边WORD格式punchriveting冲压铆合sidestretch侧冲压平reelstretch卷圆压平groove压线blanking下料stampletter冲字(料号)shearing剪断tick-marknearside正面压印tick-markfarside反面压印extensiondwg展开图proceduredwg工程图diestructuredwg模具结构图material材质materialthickness料片厚度factor系数upward向上downward向下pressspecification冲床规格dieheightrange适用模高dieheight闭模高度burr毛边gap间隙weight重量totalwt.总重量punchwt.上模重量。

模切常用英语

模切常用英语

模切英语1常用模切词汇(一)模切----Die cut刀具---tool平刀---Flatbed die圆刀---Rotary die精度---precision公差---tolerance圆刀模切---Rotary die cutting平刀模切---Flatbed die cutting激光模切---Laser die cutting刀座---station冲压---stamping印刷---printing喷漆---painting镀金属(法)---metallization数码装饰(法)---digital decoration碾压,层压---laminate分切---slit装配---Assembly嵌缝材料---Joint material保护膜---Protective Film粘结胶带---Bonding Adhesive Tape单面胶带---single-sided adhesive tape双面胶带---Double-coated Adhesive Tape防尘网---Dustproof Mesh泡棉---Foam金属箔膜---Metal foil film空间填补---Space Filling网孔冲压---Mesh Stamping按键板---Key Plate金属冲压件---Metal Punching Part塑胶薄膜类---Plastic Film低粘性保护膜---Low-adhesive protective film 静电---static厚度---thickness密度---density定制---customize基材---carrier硬度---rigidity透明色---transparent colorGlassine liner-----格钠辛底纸paper liner----纸离型膜Ployester liner-----PET离型膜Vacume die--真空刀Strip bar---剥刀Nip roller--胶辊Relaese tab---小耳朵Die cut----模切Flatbed die---平刀Rotary Die---圆刀Kiss cutting--半切Through cutting--全切ID slug---内框废料Waste matrix---外框废料Thermal bonding film-----热溶胶Polyester film----PET 膜Release liner---离型模Fine-tuning----微调Bi-level die----双层刀Stee rule die----平板刀Etch Die----蚀刻刀Male/femal die----公母模Engraving die----雕刻模Seek Pin---套位针Tension---张力Torque---扭力Slitting----分切Rewind----收料Unwind----放料材料名称:Copper----铜Rubber ----橡胶垫material----材料机器名称1 大断机/裁断机2 全自动分切机3 精密复合机4 油压裁断机5 精密油压裁切机6 热压机7 圆磨刀床8 精密切卷机9 切片机10 排废切片机11 高速冲床12 高速精密模切机13 高速高精密模切机14 复合机15 多功能精密复合机16 排线收卷机17 自动流水线11.The fault / Cutting Machine2.Automatic Slitter3.Precision Machine Complex4.hydraulic cutting machine5.Precision hydraulic cutting machine6.Hot-press7.circular bed Brothers8.vol fine close -9. Slicing Machine10.row waste Slicing Machine11.high-speed presses12.high-speed precision die-cutting machine13.high-speed high-precision cutting machinebo15.precision machine composites16.line winding machine17.auto assembly line 11の大きい断器/器を裁断して2は全部自動で切器を分ける3の精密な複合した器4の油圧裁断器5の精密な油圧裁断機6は圧器を熱する7元は研ぐベッド8は精密に巻器を切る9の切片器10列は切片器を撤廃する11の高速の押し抜き機12の高速は精密に切器を模倣する13の高速の高は精密に切器を模倣する14の複合した器15あまりの機能精密な複合した器16列の糸は巻器を収める17の自動ライン1Start with youself(从我做起)When I was young and free and my imagination had no limits,T dreamed of changing the world. As I grew older andwiser, I discowered the world would not change,so I shortened my sights somewhat and decided to change only mycountry.But,it too,seemed immovable.As I grew into my twilight yeas,in one last desperate attempt,I settled forchanging only my family,those closest to me,but alas,they would have none of it.And now as I lie on my deathbed,I suddenly realize------If I had changed myself first,then by example Icould have changed my family.From their inspiration andencouragement,I would then have been abke to better my country and,who knows,I may have even changed the would.在我年轻自由、想象力天马行空的时候,我曾经梦想改变世界。

模具专业英文术语大全

模具专业英文术语大全

模具专业英文术语大全1. Die - 模具2. Mold - 模具3. Cavity - 型腔4. Core - 芯子5. Ejector pin - 顶杆6. Land - 分型面7. Gate - 浇口8. Filleting - 去毛刺9. Trim - 修整10. Draft - 拔模斜度11. Undercut - 底切12. Flash - 飞边13. Warpage - 翘曲14. Shrinkage - 收缩15. Melt flow rate - 熔融指数16. Injection molding - 注塑成型17. Blow molding - 吹塑成型18. Compression molding - 压缩成型19. Vacuum molding - 真空成型20. Overmolding - 包覆成型21. Co-injection molding - 双色注塑成型22. Gas assist injection molding - 气体辅助注塑成型23. Rotational molding - 旋转成型24. Injection compression molding - 注射压缩成型25. Injection blow molding - 注射吹塑成型26. Injection stretch blow molding - 注射拉伸吹塑成型27. Injection transfer molding - 注射传递成型28. Injection foam molding - 注射发泡成型29. Injection gas assisted rotational molding - 注射气体辅助旋转成型30. Injection compression blow molding - 注射压缩吹塑成型31. Injection stretch blow molding - 注射拉伸吹塑成型32. Injection transfer blow molding - 注射传递吹塑成型33. Injection foam blow molding - 注射发泡吹塑成型34. Injection gas assisted transfer molding - 注射气体辅助传递成型35. Injection compression foam molding - 注射压缩发泡成型36. Injection stretch foam molding - 注射拉伸发泡成型37. Injection transfer foam molding - 注射传递发泡成型38. Injection gas assisted foam blow molding - 注射气体辅助发泡吹塑成型39. Injection compression foam blow molding - 注射压缩发泡吹塑成型40. Injection stretch foam blow molding - 注射拉伸发泡吹塑成型41. Injection transfer foam blow molding - 注射传递发泡吹塑成型42. Injection gas assisted compression molding - 注射气体辅助压缩成型43. Injection gas assisted stretch blow molding - 注射气体辅助拉伸吹塑成型44. Injection gas assisted transfer blow molding - 注射气体辅助传递吹塑成型45. Injection gas assisted foam compression molding - 注射气体辅助发泡压缩成型46. Injection gas assisted foam stretch blow molding - 注射气体辅助发泡拉伸吹塑成型47. Injection gas assisted foam transfer blow molding - 注射气体辅助发泡传递吹塑成型48. Injection gas assisted compression foam molding - 注射气体辅助压缩发泡成型49. Injection gas assisted stretch foam blow molding - 注射气体辅助拉伸发泡吹塑成型50. Injection gas assisted transfer foam blow molding - 注射气体辅助传递发泡吹塑成型51. Mold temperature control system - 模具温度控制系统52. Coolant system - 冷却系统53. Ejector system - 顶出系统54. Feed system - 喂料系统55. Packaging machine - 包装机56. Automated guided vehicle (AGV) - 自动导引车(AGV)57. Robotic arm - 机械臂58. Computer numerical control (CNC) machine - 计算机数控(CNC)机床59. Plastics injection machine - 塑料注塑机60. Plastics extruder - 塑料挤出机61. Plastics blow molding machine - 塑料吹塑机62. Plastics injection compression molding machine -塑料注塑压缩成型机63. Plastics injection stretch blow molding machine - 塑料注塑拉伸吹塑成型机64. Plastics injection transfer molding machine - 塑料注塑传递成型机65. Plastics injection foam molding machine - 塑料注塑发泡成型机66. Plastics injection gas assisted rotational molding machine - 塑料注塑气体辅助旋转成型机67. Plastics injection compression foam molding machine - 塑料注塑压缩发泡成型机68. Plastics injection stretch foam molding machine - 塑料注塑拉伸发泡成型机69. Plastics injection transfer foam molding machine - 塑料注塑传递发泡成型机70. Plastics injection gas assisted foam blow molding machine - 塑料注塑气体辅助发泡吹塑成型机71. Plastics injection compression foam blow molding machine - 塑料注塑压缩发泡吹塑成型机72. Plastics injection stretch foam blow molding machine - 塑料注塑拉伸发泡吹塑成型机73. Plastics injection transfer foam blow moldingmachine - 塑料注塑传递发泡吹塑成型机74. Plastics injection molding machine with movable platen - 带活动模板的塑料注塑机75. Plastics injection molding machine with fixed platen - 带固定模板的塑料注塑机76. Plastics injection molding machine with hot runner system - 带热流道系统的塑料注塑机77. Plastics injection molding machine with cold runner system - 带冷流道系统的塑料注塑机78. Plastics injection molding machine with multi-cavity design - 带多腔设计的塑料注塑机79. Plastics injection molding machine with clamping force control - 带夹紧力控制的塑料注塑机80. Plastics injection molding machine with cycle time reduction - 带循环时间缩短的塑料注塑机81. Plastics injection molding machine with energy saving features - 带节能功能的塑料注塑机82. Plastics injection molding machine with high precision control - 带高精度控制的塑料注塑机83. Plastics injection molding machine with automatic tool changing system - 带自动换模系统的塑料注塑机84. Plastics injection molding machine with roboticautomation - 带机器人自动化的塑料注塑机85. Plastics injection molding machine with quality control system - 带质量管理系统的塑料注塑机86. Plastics injection molding machine with process monitoring system - 带工艺监控系统的塑料注塑机87. Plastics injection molding machine with maintenance reminder system - 带维护提醒系统的塑料注塑机88. Plastics injection molding machine with data logging and analysis - 带数据记录和分析的塑料注塑机89. Plastics injection molding machine with remote control and monitoring - 带远程控制和监控的塑料注塑机90. Plastics injection molding machine with safety features - 带安全功能的塑料注塑机91. Plastics injection molding machine with operator interface - 带操作员界面的塑料注塑机92. Plastics injection molding machine with easy cleaning system - 带易清洁系统的塑料注塑机93. Plastics injection molding machine with quick change tooling - 带快速换模装置的塑料注塑机94. Plastics injection molding machine with low noiseoperation - 带低噪音运行的塑料注塑机95. Plastics injection molding machine with high throughput capacity - 带高产量能力的塑料注塑机96. Plastics injection molding machine with energy recovery system - 带能量回收系统的塑料注塑机97. Plastics injection molding machine with environmental protection features - 带环保功能的塑料注塑机98. Plastics injection molding machine with advanced materials compatibility - 带先进材料兼容性的塑料注塑机99. Plastics injection molding machine with customizable options - 可定制选项的塑料注塑机100. Plastics injection molding machine with reliable performance and durability - 具有可靠性能和耐用性的塑料注塑机。

注塑、模具行业术语:英汉对照版!

注塑、模具行业术语:英汉对照版!

注塑、模具行业术语:英汉对照版!(一)模具专业基本用词 Professional Terms1.塑料— plastic, resin2.样件— sample3.钢料— steel4.注塑机— injection machine, press5.产品— part, product, moulding6.模具— mold, mould, toolA 简易模(样板模)— prototype moldB 量产用模具— production mold7.三维造型(数模)—3D model, 3D data8.二维产品图— 2D part drawing9.设计— design10.制造— manufacture, build up, construction, fabrication, make11.检验— check, inspection12.测量— measure, inspection13.修改— change, modify, correction14.工程更改— engineer change15.质量— quality16.数量— quantity17.基准— datum, reference(二)如何解析2D 产品图?How to read 2D part drawing?一.产品几何 Geometry1.点— point2.线(边)— line, edge3.面 faceA 侧面— sideB 表面— surfaceC 外观面— appearance surface4.壁厚— wall thickness, stock thickness5.加强筋(骨位)— rib6.孔— hole7.细长的槽— slot8.柱位— boss9.角— cornerA 圆角— filletB 倒角— chamferC 尖角— sharp corner10.斜度— angle, taper11. 凹槽—recess , groove二. 分模信息 Splitting1.分型线— parting line (P/L), splitting line2.主分模方向— main direction, line of draw3.浇口设定— gating一.产品标识 Part Identification1.产品名称— part name (P/N)2.产品编号+版本号— part number + revision (Rev.) 3.型腔号— cavity number4.材料标记— material symbol5.模具编号— mold number (no.)6.日期印— dating insert, date code7.循环印— cycling code8.公司标志— company logo二. 技术要求 Specification (Special Requirement)1.项目启动表 Kick-off sheet1)项目名称— program name, project name2)产品名称— part name, product name, part description 3)产品编号— part number (P/N)4)客户模号— customer mold no.5)项目启动日期— kick off date, start date6)项目完成日期— due date, lead time7)内模件用钢— tool steel8)型腔数量— number of cavities9)数据文件编号— data file no.10)注塑材料— resin, plastic, raw material11)收缩率— shrink, shrinkage, shrink factor12)注塑机吨位— molding machine size, injection machine size13)成型周期— cycle time14)型腔光洁度— cavity polish15)型芯光洁度— core polish16)皮纹(晒纹)— texture, grain17)拔模斜度— draft angle, removal taper18)注塑件颜色及光泽— molded color & gloss19)模具加工地— manufacturing facility20)热流道供应商—manifold manufacturer, manifold supplier21)浇口位置— gate location / position22)浇口类型— gate type产品标识— stamp information, part identification特殊要求— special instructions1.产品质量及外观要求 Part Quality & Appearance Requirement1)尺寸及公差 Dimension & Tolerance① 重要尺寸— critical dimension, important dim., key dim.② 理论尺寸— nominal dimension③ 实际尺寸— actual dimension④ 公差— tolerance⑤ 公差带— tolerance range⑥ 尺寸超差— dimension deviation⑦ 接受(合格)— accept, OK⑧ 拒绝(不合格)— reject, refuse, obsolete, NG⑨ 让步接受— concession, special admit⑩ 返工— re-work2)产品缺陷(常见的)Defects (normal)① 缩水— sink mark, shrinkage② 飞边,毛边— flash, burr③ 段差— mismatch discrepancy④ 银丝纹,蛇纹— snake marks, streak⑤ 弯曲,变形— warpage, distortion⑥ 打不饱(缺料)— short shot⑦ 熔接线— weld line⑧ 多胶— unwanted plastic⑨ 拉伤—damage2.产品外观 Part Appearance① 产品颜色— part color② 产品光泽— gloss③ 皮纹粒度— grain3.常用词汇、词组及短语 Normal Word, Short Sentence1)单边— per side2)双边— both sides3)加入,添加— add, incorporate4)去除,取消— remove, cancel5)满足…的要求,符合,与…要求一致—according to, conform to, satisfy, meet6)要求,需要— require, need, demand7)确认—be approved, agreed by …8)允许— permit, allow9)在…范围之内— within10)不可以,不允许,禁止— free from, prevent, avoid11)…,除非有另指—… unless otherwise specified12)…或少于—…or less13)自动化运作— automatic operation14)未注尺寸(详细形状)见三维造型Non dimensioned contour (detailed shape) see 3D model.15)分型线上的飞边(披缝)或段差应小于…Burrs or discrepancy on the P/L shall be … or less.标题栏 Title Block1.产品名称— part name2.图纸编号 + 版本号(索引号)—drawing no. + level (index)3.一般公差— general tolerance(三)如何阅读制模标准?How to read tooling standard?一.模具结构术语 Mold Construction TermsA.模架 Mold Base1.模架量化特征 Measurement Feature① 长 X 宽 X 高— Length X Width X Height② 模具高度尺寸(模厚)— stack height of mould③ 模具重量— total weight of mould, mould thickness2.定模底板— front plate, top clamping plate, clamp plate, clamping plate3.定模板— cavity plate, fixed mould plate, A – plate4.动模板— core plate, moving mould plate, B – plate5.支撑板— support plate, backing plate6.间隔板,方铁— support blocks, rails, risers, spacer block 7.顶杆固定板— retaining plate, ejector retaining plate8.顶板— ejector plate,bottom clamping plate9.动模底板— back plate10.导柱— guide pillar, leader pin, guide pin 11.导套— guide bush, leader pin bush12.复位杆— return pin, push-back pin13.弹簧— spring14.撑头— support pillar15.顶针板导柱、导套— ejection guide pin / bush 16.垃圾钉— stop pin, stop button17.模脚— standing-off pillars18.标牌— plaque scutcheonB.成型零部件 moulding components1.型芯— core insert2.型腔— cavity insert3.镶针— core pin4.镶块— sub-insert, split5.滑块— slide, sliding split6.斜顶— lifter, angled-lift split, loose coreA 斜顶头— lifter headB 斜顶杆— lifter rod, lifter shaft7.成型顶杆— moulding face pin, form pin C.浇注系统 Feed System1.塑料 Mouldinga.主流道— sprueb.分流道 runner① 主分流道— main runner② 二级分流道— branch runner分流道断面形状 cross-sectional shape of runner① 圆形— full round② 半圆形— semicircular③ 梯形— trapezoidalc.浇口 gate常用浇口形式 normal gate type :① 边缘浇口(J型浇口)— edge gate, J – gate② 侧浇口— side gate③ 潜伏式浇口— sub-gate, subsurface gate, submarine gate, cashew gate④ 潜伏式二次浇口(隧道式浇口) —tunnel gate onto feeder post⑤ 点浇口— pin gate⑥ 直接浇口(主流道型浇口) — sprue gate, direct gate⑦ 护耳式浇口— tab gated.模腔— impressione.冷料井— cold slug wellf.热流道— hot runner2.模具零件 mold componentsa.定位圈— locating ring, location ring, register ringb.浇口套— sprue bushc.挡圈— stop ringd.浇口镶块— gate inserte.热流道板— manifoldf.热嘴— hot drophot sprue分型面及其锁紧、排气 Parting Surface, inter-locking & venting1.分型线— parting line ( P/L )2.镶拼线— bodyline, joint line3.平 / 不平的分型面— flat / non – flat parting surface4.封胶面— shut off surfaces, seal-off surfaces5.擦穿位— shut off6.碰穿位— kiss-off7.管位— parting line lock8.分型面的释放(避空) — relief of parting surface9.分型面的平衡— balancing of parting surface10.锁紧角度— locking angle11.锁紧力— clamping force12.锁模块— safety strap13.精定位— Interlock, die lock14.困气— air trap15.排气槽— vent, vent slotE.滑块机构 Slide1.驱动 Actuation① 斜导柱— angle pin, horn pin, cam pin② 弹簧— spring③ 油缸— hydraulic cylinder2.制动 Detention① 滑块固定器— slide retainer② 弹簧制动器— spring-loaded detention (plunger)③ 挡钉、挡板— stop pin, stop plate, slide stop3.导轨— gib, guide strip4.锁紧块(楔紧块)— heel block, locking heel, wedge block, chase block5.耐磨片— wear plate, wear strip6.压板— retainer, gib7.螺钉— screw8.定位销— dowel pinF.斜顶机构 Lifter1.斜顶头— lifter head2.斜顶杆— lifter rod, lifter shaft3.开口销— split pin4.固定板(压板)— retainer plate5.耐磨片— wear plate6.铜导套— bronze bushing7.衬套— spacer8.导轨— L – gib9.滑动块— slideG.顶出系统 Ejection System1.基本词汇 Basic Word① 顶出行程— ejection stroke② 模具开档— daylight③ 粘模— stick④ 产品脱模—part is push off from, clear part of mould, separation of part2.顶板机构 Ejector plate assembly① 顶板— ejector plate② 顶板固定板— retaining plate③ 推板— stripper plate④ 推板导柱— ejector guide pin⑤ 推板导套— ejector guide bush⑥ 撑头— support pillar3.复位机构 Return System① 复位杆(回程杆)— return pin, push – back pin② 垃圾钉— stop pin, stop button③ 压簧— compressed spring④ 碟簧—a stack of ―Belleville‖ washers⑤ 早复位机构— early return system⑥ 强制复位机构— positive return system4.顶出方法 Ejection Techniques1)顶杆顶出— pin ejection2)顶管顶出— sleeve ejection3)顶块顶出— bar ejection4)扁顶顶出— blade ejection5)顶板顶出— stripper ejection6)油缸顶出— hydraulic ejection7)气顶— air ejection8)阀门顶出— valve ejection5.顶出元件 Ejection Elements1)拉料杆— sprue puller, sucker pin2)顶杆— ejector pin3)阶梯式顶杆— stepped ejector pin1)顶管— ejection sleeve, sleeve2)扁顶— ejector blade, slabbed off ejector pin3)顶块— stripper bar4)顶环— stripper ring5)推板— stripper plate6)加速顶— accelerated ejection1.顶出辅助机构 Supplementary operating system1)弹簧柱塞器— spring – loaded plunger2)弹珠定位器— ball catch system3)插销式锁扣— Latch – lock4)尼龙拉杆装置— friction puller device2.电器元件 Electric Components1)压力传感器— pressure transducer2)限位开关— limit switchF.冷却系统 Cooling System1.基本词汇 Basic Word1)温差— temperature variation2)水孔(水道)—waterlines, water-ways, flow-way, channel3)水路— cooling circuit4)水路示意图— water schematic, schematic circuit5)冷却液— coolant, coolant fluid6)内连接— interconnect7)外连接— external connection8)出口、入口— outlet、inlet9)漏水— water leakage2.水路分布 Circuits1)阶梯式水路— stepped system2)分隔板水路— baffled hole system3)斜孔式水路— angled hole system3.水路元件 Components1)闷头(螺塞、止水栓)—(threadless)brass pressure plug : female plug & male2)隔水片— baffle3)密封圈— O – ring4)快插水路接头—quick disconnect fitting, quick connection adaptor5)弯头— elbow6)偶合器(连接器、接头)— adaptor (including a plug & a socket)7)橡皮管— rubber hose1)分水板,集水块— water manifoldG.螺纹、螺纹孔 & 螺钉 Thread, thread hole & screw1.螺纹— thread2.管螺纹— pipe thread3.螺纹孔— screw hole, tapped hole4.起吊孔— handling hole, jack screw hole, eye bolt hole 5.螺钉— screw6.内六角螺钉— socket headed cap screw (s.h.c.s.)7.沉头螺钉— flat headed cap screw (f.h.c.s)8.螺栓— bolt9.螺母— nut10.锁紧螺母— locknut11.螺纹标准 Thread Standard① 公制标准— Metric② 英制标准— Imperial③ 英制管螺纹标准— British Standard Pipe thread (BSP)④ 美制管螺纹标准— NPT⑤ 美制粗螺纹标准— United Coarse thread (UNC)⑥ 美制细螺纹标准— United Fine thread (UNF)H.润滑 Lubrication1.润滑槽— grease groove2.加油管— grease line3.油杯— lubrication fittingI. 测量仪器 Measuring Instruments1.游标卡尺— vernier caliper2.千分尺— micrometer3.高度规— height gauge4.刻度规— dial gauge5.三坐标测量仪(三次元)— Coordinate Measure Machine (CMM)6.塞规— pin gauge7.圆角量规— radii gauge8.轮廓投影机—profile projectorJ.注塑机参数 Injection Machine Parameter1.注塑机规格参数 Injection Machine Specification① 锁紧类型 clamp typea.油缸— hydraulicb.肘杆式— toggle② 垂直注塑机导柱间距— tie bar vertical clearance③ 水平注塑机导柱间距— tie bar horizontal clearance④ 台板尺寸— platen dim.⑤ 最小 / 最大模厚— mold height Min. / Max., Min. / Max.mold thickness⑥ 最小 / 最大注塑机开档— open daylight Min. / Max.⑦ 锁紧行程— clamp stroke⑧ 锁紧力— clamping force⑨ 顶出行程— ejector stroke⑩ 顶出力— ejector force !你想成为学霸吗。

模切英语

模切英语

模切英语1常用模切词汇(一)模切----Die cut刀具---tool平刀---Flatbed die圆刀---Rotary die精度---precision公差---tolerance圆刀模切---Rotary die cutting平刀模切---Flatbed die cutting激光模切---Laser die cutting刀座---station冲压---stamping印刷---printing喷漆---painting镀金属(法)---metallization数码装饰(法)---digital decoration碾压,层压---laminate分切---slit装配---Assembly嵌缝材料---Joint material保护膜---Protective Film粘结胶带---Bonding Adhesive Tape单面胶带---single-sided adhesive tape双面胶带---Double-coated Adhesive Tape防尘网---Dustproof Mesh泡棉---Foam金属箔膜---Metal foil film空间填补---Space Filling网孔冲压---Mesh Stamping按键板---Key Plate金属冲压件---Metal Punching Part塑胶薄膜类---Plastic Film低粘性保护膜---Low-adhesive protective film 静电---static厚度---thickness密度---density定制---customize基材---carrier硬度---rigidity透明色---transparent colorGlassine liner-----格钠辛底纸paper liner----纸离型膜Ployester liner-----PET离型膜Vacume die--真空刀Strip bar---剥刀Nip roller--胶辊Release tab---小耳朵Die cut----模切Flatbed die---平刀Rotary Die---圆刀Kiss cutting--半切Through cutting--全切ID slug---内框废料Waste matrix---外框废料Thermal bonding film-----热溶胶Polyester film----PET 膜Release liner---离型模Fine-tuning----微调Bi-level die----双层刀Steel rule die----平板刀Etch Die----蚀刻刀Male/femal die----公母模Engraving die----雕刻模Seek Pin---套位针Tension---张力Torque---扭力Slitting----分切Rewind----收料Unwind----放料机器名称1 大断机/裁断机The fault / Cutting Machine2 全自动分切机Automatic Slitter3 精密复合机 Precision Machine Complex4 油压裁断机 hydraulic cutting machine5 精密油压裁切机 Precision hydraulic cutting machine6 热压机Hot-Press7 圆磨刀床 circular bed Brothers8 精密切卷机vol fine close9 切片机 Slicing Machine10 排废切片机 row waste Slicing Machine11 高速冲床 high-speed presses12 高速精密模切机 high-speed precision die-cutting machine13 高速高精密模切机 high-speed high-precision cutting machine14 复合机 combo15 多功能精密复合机 precision machine composites16 排线收卷机 line winding machine17 自动流水线auto assembly line 1About Die CuttingDie cutting is the method of using sharpened, thin steel blades called dies to cut out a variety of shapes from all kinds of material. There are several types of die cutting services, including rotary, steel rule, ultrasonic and laser. In rotary die cutting services, the material is crush cut between the angled blades on a cylindrical die and an anvil. Typically, the material is cut in continuous roll form, though sheets of metal can be fed through the rotary die. Steel rule die cutting services involve crush cutting the material by placing it against a cookie cutter-like tool and pressing the two with several tons of force between two parallel plates. There is also a rotary steel rule drum version that is used to cut large parts, such as boxes or garments, when accuracy is not necessary. In ultrasonic die cutting services, a metal horn vibrates in a manner similar to that of an audio speaker but at a frequency beyond human hearing. The resulting vibrations generate heat and pressure that will seal thermoplastic materials. When the vibrations are placed against a rotary die, it is possible to die cut and seal two dimensional shapes in a continuous process. In laser die cutting services, computers control 3-axis laser cutting machines. Laser die cutters come in two types: flat cutters, which cut flat sheets of material, and rotary cutters, which cut material from a web.There are many types of steel rule dies. Conventional dies can attain the highest accuracies and the most intricate of forms and can make fold lines, scores and perforated or partial cuts. These dies are typically used to cut corrugated boxes, folding cartons, gaskets, plastics, fabric, rubber, foam and composites. The blades are held in place by high density plywood; the t hickness of the blade is usually between .028" and .056”. Heavy duty steel rule dies have thicker blades (.056"-.112”) to cut through thicker, tougher materials. The blades, which can be serrated, are also held in place by high density plywood. Typical uses include gaskets, plastics, Kevlar, fabric, rubber, leather and composites. Clicker dies are perfect for cutting thicker, tougher materials but have the additional benefit of lightweight construction. The blades, running in thicknessesfrom .084" to .112”, are held in place by welded cold rolled steel braces. Bolt dies are utilized in applications in which internal cut out shapes or slits are needed in thicker, tougher materials. The blades are the same as the ones used in clicker dies, having the same range of thicknesses and the option of being serrated. High density plywood holds the steel blades in place but without exterior wood as is found on heavy duty dies. Bolt dies are commonly used for gaskets, plastics, Kevlar, fabric, rubber, leather and composites.Rotary dies are typically found in the corrugated box industry, but are also commonly utilized for plastics, foam and rubber. In rotary die cutting, parts are consistently within a tolerance as tight as .02”. Ultrasonic die cutting is ideal for c utting thermoplastic material that tends to easily fray. However, this type of die cutting is limited in that only relatively thin materials can be cut, and parts have a small maximum width. Laser die cutting is very useful for cutting materials that are impossible for conventional steel rule dies to cut, such as steel thicker than .5”. Laser die cutting can also be used to cut ABS, acrylic, aluminum, brass, composites, copper and cured fiberglass.Die-cutting TermsAir Holes – Holes in die cutters that aid in the prevention of deformations in die cut materials by allowing the release of air from the die cavities.Anvil – The surface upon which the materials to be die cut rest.Automated Feed Systems – Components of certain die cutting machines that provide the continuous, automatic supply of material to the die cut machine.Capacity – The widest part that can be cut on the equipment.Chisel Punches – Blades located either on the die or another part of the press that produce a separation in die cut materials.Composite – A material obtained by layering and bonding with resin sheets of woven material to obtain specific characteristics and properties. The materials are not completely blended and so remain physically identifiable.Deflection – Unwanted deviation from parallelism in the top die plate.Die Blade – A steel blade attached to the die that performs the cutting procedure by penetrating through the die cut substance.Dieboard – Steel rule die component, often consisting of plywood, in which the die blades are inserted.Kevlar –DuPont’s trade name for aramid fibers that are strong, tough and stiff, have a high melting point and are used in composite construction. Kevlar is lighter, stiffer and more costly than glass fiber.Kiss Cut – A die cut that penetrates the upper layer(s) of the die cut material instead of penetrating through the material.Knifing – The process of fitting the steel die blades into the die board of a steel rule die. Nicks – Indentations in a die rule that stop the cutting.Punch – The die component that actually forms, or punches, a shape from the die cutting material.Steel Rule Die – A flatbed die containing sharp blades in the dieboard situated in a particular line to reflect the required part design.Through Cutting – Die cutting in which the die cut material is penetrated all the way. Ultrasonic – A frequency usually higher than 20 kHz, which is too high to be heard by the human ear.Web – Continuous roll form.。

最全模具行业术语英文翻译

最全模具行业术语英文翻译

主题:模具常用英语单词一、入水:gate缩呵:movable core,return core core puller 进入位:gate location扣机(尼龙拉勾):nylon latch lock水口形式:gate type上内模:cavity insert下内模:core insert大水口:edge gate压座/斜鸡:wedge活动臂:lever arm细水口:pin-point gate耐磨板/油板:wedge wear plate水口大小:gate size压条:plate撑头: support pillar转水口:switching runner/gate扣鸡:parting lock set推杆:push bar唧嘴口径:sprue diameter 栓打螺丝:S.H.S.B顶板:eracuretun二、流道: runner分流锥:spure sperader热流道:hot runner,hot manifold 隔片:buffle弹弓柱:spring rod热嘴冷流道: hot sprue/cold runner 弹弓:die spring中托司:ejector guide bush唧嘴直流: direct sprue gate中托边:ejector guide pin圆形流道:round(full/half runner 镶针:pin销子:dowel pin流道电脑分析:mold flow analysis波子弹弓:ball catch喉塞: pipe plug流道平衡:runner balance斜顶杆:angle ejector rod热流道板:hot manifold尼龙拉勾:parting locks活动臂:lever arm发热管:cartridge heater复位键、提前回杆:early return bar探针: thermocouples气阀:valves斜导边:angle pin插头:connector plug承压平面平衡:parting surface support balance插座:connector socket回针碰料位:return pin and cavity interference 密封/封料:seal模总高超出啤机规格:mold base shut hight三、运水:water line顶针碰运水:water line interferes withejector pin 喉塞:line lpug料位出上/下模:part from cavith (core) side喉管:tube模胚原身出料位:cavity direct cut on A-plate,塑胶管:plastic tube不准用镶件:Do not use (core/cavity) insert 四、模具零件:mold components用铍铜做镶件:use beryllium copper insert 三板模:3-plate mold初步(正式)模图设计:preliinary (final) mold design 二板模:2-plate mold反呵:reverse core边钉/导边:leader pin/guide pin弹弓压缩量:spring compressed length中托司:shoulder guide bushing稳定性好:good stability,stable中托边L:guide pin强度不够:insufficient rigidity托板:support plate均匀冷却:even cooling管钉:dowel pin扣模:sticking公差:tolorance开模槽:ply bar scot热膨胀:thero expansion内模管位:core/cavity inter-lock铜公(电极):copper electrode司筒:ejector sleeve模排气:parting line venting司筒针:ejector pincore direct cut on B-plate.热嘴:hot sprueMoulding模塑水口司:bush垃圾钉:stop pinLifter Pin顶料销锁模块:lock plate斜顶:liftersMiller Milling Machine铣床快速接头:jiffy quick connector plug/socker Dowel Pin定位梢turnnel隧道进浇镶针insert pin排气槽: scot for venting胶位: plastic牙孔:hole for screw行位槽:slide scot/scot for slide喷砂:engraving螺母:Nuts screw: 螺杆导套:guide bushingtry out:试模配镶件making inserts装配:assemble晒纹:texturing运水孔:hole for water line 限位开关:Limit Switches直顶:top engraving:晒字喷砂:texture吹塑:blowmolding guide pin :导柱solid整板模cold sprue冷唧嘴, cold runner hydraulic ejection 油缸顶出cashew腰果型进浇spring return弹簧复位manifold热流道板draft斜度热唧嘴 hot runnerInserted镶件模行位(滑块):slide镶件:insert推板:stripper plate斜顶:lifterundercut 倒扣/里面Driller钻床flash 披风rib 骨位一.模具加工方法英语词汇四.模具线切割放电加工相关英语词汇abnormal glow不规则辉光放电barrel滚筒(加工)arc discharge电弧放电bending波纹加工belt皮带broaching拉刀切削centreless无心centering定中心chrome bronze铭铜cutting切削clearance angle後角cylindrical lathe cutting外圆车削corner shear drop直角压陷electric discharge machine放电加工deflection桡曲度electrolytic grinding电解研磨discharge energy放电能量embossing压花加工dressing修整facing面车削dwell保压filing锉刀修润flange凸缘hand finishing手工修润gap间隙hemming卷边加工graphite石墨hobbing滚齿加工graphite contraction allowance 电极缩小余量joggling摇动加工graphite holder电极夹座lapping抛光/研磨修润hair crack发裂laser beam machining 雷射加工horn电极臂lathe cutting车床车削jump跳刀planning刨削加工magnetic base磁性座polishing抛亮光master graphite标准电极reaming铰孔修润pipe graphite管状电极rough machining粗切削pulse脉冲rounding圆形加工rib working肋部加工sawing锯削roller electrode滚轮式电极scaling清除钢碇缺陷rotary surface旋转面shaping成形加工shank柄部skiving表面研磨slotting切缝切削sharp edge锐角部taper turning锥度车削tough bronze韧铜thread cutting螺纹切削traverse摇臂ultrasonic machining超音波加工tungsten bronze钨青铜up cut milling逆铣加工waviness波形起伏working allowance加工余量二.模具砂轮用语英语词汇working dischard加工废料abrasive砂轮Al2O3氧化铝五.模具冲压机械及周边英语词汇borazon氧化硼立方晶back shaft支撑轴buffing wheel抛光布轮blank determination胚料展开diamond钻石bottom slide press 下传动式压力机dresser砂轮整修机board drop hammer 板落锤dressing修整brake煞车buckle剥砂面endless grinding belt 循环式研磨带camlachie cramp铸包finishing allowance 加工余量chamotte sand烧磨砂grain磨粒charging hopper加料漏斗grinding disc研磨盘clearance间隙jamp up孔眼堵塞closed-die forging合模锻造mesh网筛目clump夹紧resinoidgrindingwheel半树脂型砂轮slitting切缝量clutch离合器vitrified陶瓷的clutch brake离合器制动器clutch boss离合器轮壳三.模具锻铸造相关英语词汇clutch lining离合器覆盖accretion炉瘤coil car带卷升降运输机acid converter酸性转炉coil cradle卷材进料装置acid lining cupola酸性熔铁炉coil reel stand钢材卷料架acid open-hearth furnace 酸性平炉column圆柱aerator松砂机connection screw连杆调节螺钉air set mold常温自硬铸模core compound砂心黏结剂airless blasting cleaning 离心喷光counter blow hammer 对击锻锤all core molding集合式铸模cradle送料架all round die holder 通用模座crank曲柄轴assembly mark铸造合模记号crankless无曲柄式back pouring补浇注cross crank横向曲轴backing sand背砂cushion缓冲base bullion粗金属锭depression外缩凹孔base permeability原砂透气度dial feed分度送料belling压凸die approach模口角度billet坏料die assembly合模bleed漏铸die cushion模具缓冲垫blocker预锻模膛die height冲压闭合高度blocking粗胚锻件die life模具寿命blow hole铸件气孔die opening母模逃孔board drop hammer 板落锤die spotting press 调整冲模用压力机bottom pour mold 底浇double crank press 双曲柄轴冲床bottom pouring底注draght angle逃料倾斜角boxless mold脱箱砂模edging边锻伸break-off core缩颈砂心embedded core加装砂心brick molding砌箱造模法feed length送料长度buckle剥砂面feed level送料高度camber错箱filling core埋入砂心camlachie cramp铸包filling in填砂cast blade铸造叶片film play液面花纹casting flange铸造凸缘fine blanking press 精密下料冲床casting on flat水平铸造forging roll辊锻机chamotte sand烧磨砂finishing slag炼後熔渣charging hopper 加料漏斗fly wheel飞轮cleaning of casting 铸件清理fly wheel brake飞轮制动器closed-die forging 合模锻造foot press脚踏冲床core compound砂心黏结剂formboard进模口板core template砂心模板frame床身机架core vent砂蕊排气孔friction摩擦corner gate压边浇口friction brake摩擦煞车counter blow hammer 对击锻造gap shear凹口剪床counter lock止口镶嵌方式gear齿轮depression外缩凹孔gib滑块引导部die approach模口角度gripper夹具draw out锻造拔长gripper feed夹持进料draw plate起模板gripper feeder夹紧传送装置draw spike起模长针hammer槌机dummying预锻hand press手动冲床embedded core加装砂心hand rack pinion press 手动齿轮齿条式冲床erosion冲砂hand screw press手动螺旋式冲床fettling铸件清理hopper feed料斗送料filling core埋入砂心idle stage空站filling in填砂inching微调尺寸film play液面花纹isothermal forging 恒温锻造finishing slag炼後熔渣key clutch键槽离合器flash gutter锻模飞边槽knockout脱模装置flask molding砂箱造模knuckle mechanic 转向机构forging roll辊锻机land模具直线刀面部formboard进模口板loader供料器unloader卸料机gutter锻模飞边槽loop controller闭回路控制器hammer man锻工lower die下模heading machine顶镦机micro inching device微寸动装置impacter卧式锻造机microinching equipment 微动装置inblock cast整体铸造moving bolster活动工作台ingot铸锭notching press冲缺口压力机ingot blank铸坯opening排料逃孔inlay casting镶铸法overload protection device 防超载装置investment casting失模铸造pinch roll导正滚轮isothermal forging恒温锻造pinion小齿轮loose piece木模活块pitch节距molding pit铸模地坑pressfit压入pouring process浇注法progressive连续送料recasting重铸pusher feed推杆式送料roll forging轧锻pusher feeder料片押片装置rolled surface轧制表面quick die change system 快速换模系统rough sand粗砂regrinding再次研磨roughing forge粗锻releasing松释动作sand crushing塌箱reversed blanking反转下料seamless forging无缝锻造robot机器人separate分离roll forming machine辊轧成形shave崩砂roll forming machine辊轧成形机shrinkage fit收缩配合roll release脱辊shut height闭合高度roller feed辊式送料sieve mesh筛孔roller leveler辊式矫直机sintering of sand 铸砂烧贴rotary bender卷弯成形机slag熔渣safety guard安全保护装置slag inclusion夹渣scrap cutter废料切刀stickness黏模性scrap press废料冲床strip layout带状胚料排样法seamless forging 无缝锻造tap casting顶注shave崩砂top gate顶注浇口shear angle剪角unworked casting 不加工铸件sheet loader薄板装料机upender翻转装置shot单行程工作upending顶锻shrinkage fit收缩配合uphill casting底铸shut height闭合高度white cast iron白口铸件sieve mesh筛孔六.模具冲模加工英语词汇sintering of sand铸砂烧贴barreling滚光加工slide balancer滑动平衡器belling压凸加工slug hole逃料孔bending弯曲加工spin forming machine 旋压成形机blanking下料加工spotting合模bulging撑压加工stack feeder堆叠拨送料机burring冲缘加工stickness黏模性cam die bending凸轮弯曲加工straight side frame冲床侧板coining压印加工stretcher leveler 拉伸矫直机compressing压缩加工strip feeder料材送料装置compression bending 押弯曲加工stripping pressure弹出压力crowning凸面加工stroke冲程curl bending卷边弯曲加工take out device取料装置curling卷曲加工toggle press肘杆式压力机cutting切削加工transfer feed连续自动送料装置dinking切断蕊骨turrent punch press 转塔冲床double shearing叠板裁断two speed clutch双速离合器drawing引伸加工uncoiler闭卷送料机drawing with ironing 抽引光滑加工unloader卸载机embossing浮花压制加工vibration feeder振动送料机extrusion挤制加工wiring press嵌线卷边机filing锉削加工七.模具常用刀具工作法英语词汇fine blanking精密下料加工finish blanking光制下料加工adjustable spanner活动扳手finishing精整加工angle cutter角铣刀flanging凸缘加工arbour心轴folding折边弯曲加工backing衬垫folding摺叠加工belt sander带式打磨机forming成形加工buffing抛光impact extrusion冲击挤压加工chamfering machine倒角机indenting压痕加工chamfering tool去角刀具ironing引缩加工chisel扁錾knurling滚花chuck夹具lock seaming固定接合compass两角规louvering百叶窗板加工concave cutter凹面铣刀marking刻印加工convex cutter凸形铣刀necking颈缩加工cross joint十字接头notching冲口加工cutting edge clearance 刃口余隙角parting分断加工drill stand钻台piercing冲孔加工edge file刃用锉刀progressive bending 连续弯曲加工file锉刀progressive blanking 连续下料加工flange joint凸缘接头progressive drawing 连续引伸加工grinder砂轮机progressive forming 连续成形加工hammer铁锤reaming铰孔加工hand brace手摇钻restriking二次精冲加工hatching剖面线riveting铆接加工hexagon headed bolt 六角头螺栓roll bending滚筒弯曲加工hexagon nut六角螺帽roll finishing滚压加工index head分度头rolling压延加工jack千斤顶roughing粗加工jig治具scrapless machining 无废料加工kit工具箱seaming折弯重叠加工lapping研磨shaving缺口修整加工metal saw金工锯shearing切断加工nose angle刀角sizing精压加工/矫正加工pinchers钳子slitting割缝加工pliers铗钳plug柱塞头spinning卷边?接polisher磨光器stamping锻压加工protable driller 手提钻孔机swaging挤锻压加工punch冲头trimming整缘加工sand paper砂纸upsetting锻粗加工scraper刮刀wiring抽线加工screw driver螺丝起子scribing划线second out file中纹锉spanner扳手spline broach方栓槽拉刀square直角尺square sleeker方形镘刀encapsulation molding低压封装成型、射出成型用模具two plate两极式(模具)well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道welding line熔合痕eject pin顶出针knock pin顶出销return pin回位销反顶针sleave套筒stripper plate脱料板insert core放置入子runner stripper plate 浇道脱料板guide pin导销eject rod (bar)(成型机)顶业捧subzero深冷处理three plate三极式模具runner system浇道系统stress crack应力电裂orientation定向sprue gate射料浇口,直浇口nozzle射嘴sprue lock pin料头钩销(拉料杆)slag well冷料井side gate侧浇口edge gate侧缘浇口tab gate搭接浇口film gate薄膜浇口Linear Cutting线割wire-cutElectrical Sparkle电火花EDM唧嘴:sprue bushing挡板:stop plate定位圈:locating ring锁扣:latch边司/导套:bushing/guide bushing stock removal切削cross feature交叉部分weld烧焊corner pad立面图套角elevation提高,上移,立体图,高处代表typicaldraft斜度垂直壁面verticalradius半径直径diameter壁面notch PL分型面weld sealoff for slot封胶面烧焊,形成凹槽顶针:ejector pin螺丝:screw顶针板:ejector retainner plate Pin销Guide Pin导正销flash gate闸门浇口slit gate缝隙浇口fan gate扇形浇口dish gate因盘形浇口diaphragm gate隔膜浇口ring gate环形浇口subarine gate潜入式浇口tunnel gate隧道式浇口pin gate针点浇口Runner less无浇道(sprue less)无射料管方式long nozzle延长喷嘴方式sprue浇口;溶渣square trowel直角度stripping剥离工具T-slot T形槽tool for lathe车刀tool point angle刀刃角tool post刀架tosecan划线盘trimming去毛边waffle die flattening压纹效平wiper脱模钳wrench螺旋扳手八.模具表面处理英语词汇age hardening时效硬化ageing老化处理air hardening气体硬化air patenting空气韧化annealing退火anode effect阳极效应anodizing阳极氧化处理atomloy treatment阿托木洛伊表面austempering奥氏体等温淬火austenite奥斯田体/ 奥氏体bainite贝氏体banded structure条纹状组织barrel plating滚镀barrel tumbling滚筒打光blackening染黑法blue shortness青熟脆性bonderizing磷酸盐皮膜处理box annealing箱型退火box carburizing封箱渗碳bright electroplating辉面电镀bright heat treatment光辉热处理bypass heat treatment旁路热处理carbide炭化物carburized case depth浸碳硬化深层carburizing渗碳cementite炭化铁chemical plating化学电镀chemical vapor deposition 化学蒸镀coarsening结晶粒粗大化coating涂布被覆cold shortness低温脆性comemtite渗碳体controlled atmosphere大气热处理corner effect锐角效应creeping discharge蠕缓放电decarburization脱碳处理decarburizing脱碳退火depth of hardening硬化深层diffusion扩散diffusion annealing扩散退火electrolytic hardening电解淬火embossing压花etching表面蚀刻ferrite肥粒铁first stage annealing第一段退火flame hardening火焰硬化flame treatment火焰处理full annealing完全退火gaseous cyaniding气体氧化法globular cementite球状炭化铁grain size结晶粒度granolite treatment磷酸溶液热处理graphitizing石墨退火塑件模具专业英语词汇大全compre sion molding 压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具配镶件:making inserts清角:clearance。

模具常用术语中英文对照表

模具常用术语中英文对照表

模具常用术语中英文对照表"R,L Co.,Ltd" 模具常用术语中英文对照模芯Parting Core局部视图Partial View冷料# Cold Slag线切割Wire E.D.M轮廊Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leaderd Pin镶件Mold Insert加硬Harden唧嘴Sprue设计筒图Design Preliminary名称块表Title Block版本标识Revision Level材料清单Stock List制模Build Mold手动滑块Hand Slide漏水测试Leak Test流道排气Runner Vents抛光Draw Polish侧抽芯Side Action加强筋Reinforcing三角撑Gusset柱子Bossed出模斜度Draft外廊Contour落单会议Kick-Off Meeting装卸孔Handling Hole运输安全带Moldstrap码模槽Clamp Slot撑头Support Pillar螺牙1/2-13 Eye Bolt 1/2-13Tap导柱位Leader Pin Location耐落胶T eflon Paste偏移量Offset 水塞Water Line Plug 撬模脚Ppy Slot重新加工Reworked配件Components补偿Compensation平面度Parallel倒角Chamfer模胚Mold Base热嘴Hotnozzle火花机Edm熔接线Weildline压机Press晒纹Texturing梯形Trapezoid凸缘、法兰Flange方铁Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate后模镶针Core Pin拉圾钉Stop Pin有托顶针Shoulder Ejector Pin顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin 唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing 定位圈(法兰)Locating Ring 管钉(定位销)Dowel Pin管状管钉Tubular Dowel吊环Safety Hoist Ring日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件Runner Shut-Off Insert早回Early Ejector Return加速项Accelerated Ejector客户Client产品名Part Name产品编号Part No缩水Shrinkage版本Rev模胚Mold Base下模镶件Core Block上模镶件Cavity Block小镶件Sub-Insert下模小镶件Core Sub-Insert上模小镶件Cavity Sub-Insert行位Slide行位镶件Slide Insert压条Gib压紧块(铲机)Jaw硬片(摩擦片)Wear Plate水口铁Runner Bar上模水口铁Upper Runner Bar下模水口铁Lower Runner Bar弹簧Spring水口勾针Sprue Puller Pin顶针Ejector Pin撑头Support Pillar直身锁Side Lock斜度锁Interlock锁模板Safety Bar‘O’令(密封圈)O'Ring喉塞Plug隔水片Baffle波子螺丝(行位定位螺丝)Ball-Catch 斜顶Lifter控制开关Switch回针Return Pin斜导柱Angle Pin推板Stripper PlateA’板A'PlateB’板B'Plate方铁(垫铁)Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate垃圾钉Stop Pin有托顶针Shoulder Ejector Pin 顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin 唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing 定位圈(法兰)Locating Ring 管钉(定位销)Dowel Pin管状管钉Tubular Dowel吊环Safety Hoist Ring日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件Runner Shut-Off Insert早回Early Ejector Return加速顶Accelerated Ejector扁顶Blade出模斜波Draft手动滑块模具Hand Slide-In Type Mold 回针板Backup合模Shutoff空隙槽Clearance Slot导柱及导套Leader Pin Bushing水口拉钩Spuer Puller模框镶件Pocket Insert成型热固性塑胶模具Thermoset Mold三板模3-Plat Mold分型面Parting Line司筒Ejector Sleeve垫圈Washer熔接线(夹水纹) Weldline吸针Sucker Pin回针板Retainer Plate顶出板Knock -Out Plate电动安全开关Electrical-Safety Switch 脱开Cut Of Position 预先决定Preload缓冲器Bumper衬垫Cushion公差Tolerance突然性动作Slam销针Dowel钩槽Gib精磨Finished通框Through Window粘后模Sticking Core粘水口Sticking Sprue夹水纹Weld Line变形Warpage走水不平均Filling Uneven走不齐Short Shot挂成品Part Hanging漏水Water Leakage刮花(擦伤)Galling漏电Ele Leakage困气Air Trapping温度Temperature注塑模Injection Mold入水Gate试板Sampling压力Pressure倒圆Fillet顶棍Ejector顶白Stress Mark粘前模Sticking Cav名称块表Title Block版本标识Revision Level材料清单Stock List斜导柱(斜边)Angle PinA板 A'plateB板 B'plate倒扣Under-Cut披峰Flash缩水Sink Mark氮化Nitride不规则四边形Trapezoid缩水Shrinkage连续的Consecutive雕刻Engrave出模角Draft分模面Parting Surface擦位Shut-Off(S/0)导套Bushing回针Return Pin加硬Harden唧嘴Sprue设计筒图Design Preliminary 丝印Silkprint 不干胶Adhesive Sticker 导向针Guide Din 公差Tolerance线切割Wire-Cut电火花Edm抛光Polishing蚀纹Texture 探热针Thermocouple三打螺丝毫(限螺丝)Stripper Bolt 盖板Cover Plate齿轮Gear油唧Hydraulic Cylinder司筒Ejector Sleeve导柱Leader Pin冷料# Cold Slag线切割Wire E.D.M.轮廓Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leader Pin镶件Mold Insert锁定位Lock楔子(铲鸡) Wedge高产量模量High Volume Running Mold 剖面图Cross Section 模具结构Mold Construction模芯Parting Core局部视图Partial View热流道Manifold热嘴Hot Nozzle型腔数Cav No模号Mold No胶料Material尺寸Dimension重要尺寸Critical Dimension 雕刻Engrave托司 EJ.GUIDE PIN。

最全的模具英语专业术语(超级实用)

最全的模具英语专业术语(超级实用)

最全的模具英语专业术语(超级实用)模具专业英语出模: mould unloading, mold stripping 出模角 : Draft Angle 出模方向: The direction of the mold Mold Parting Direction 入水: gate 进入位:gate location水口形式: gate type 大水口: edge gate细水口: pin-point gate 水口大小: gate size转水口:switching runner/gate 唧嘴口径:sprue diameter二、流道: runner热流道:hot runner,hot manifold 热嘴冷流道: hot sprue/cold runner 唧嘴直流: direct sprue gate 圆形流道:round(full/half runner流道电脑分析:mold flow analysis 流道平衡: runner balance 热嘴: hot sprue 热流道板: hot manifold发热管: cartridge heater 探针: thermocouples插头: connector plug 插座: connector socket密封/封料: seal三、运水:water line喉塞: line lpug 喉管: tube塑胶管:plastic tube 快速接头:jiffy quick connector plug/socker 四、模具零件:mold components三板模: 3-plate mold 二板模: 2-plate mold边钉/导边:l eader pin/guide pin 边司/导套: bushing/guide bushing 中托司: shoulder guide bushing 中托边L: guide pin 顶针板: ejector retainner plate 托板: support plate螺丝: screw 管钉: dowel pin开模槽: ply bar scot 内模管位: core/cavity inter-lock顶针: ejector pin 司筒: ejector sleeve司筒针: ejector pin 推板: stripper plate缩呵: movable core,return core core puller扣机(尼龙拉勾): nylon latch lock 斜顶: lifter模胚(架): mold base 上内模: cavity insert下内模: core insert 行位(滑块): slide镶件: insert 压座/斜鸡: wedge耐磨板/油板: wedge wear plate 压条: plate撑头: support pillar 唧嘴: sprue bushing挡板: stop plate 定位圈: locating ring锁扣: latch 扣鸡: parting lock set推杆: push bar 栓打螺丝: S.H.S.B顶板: eracuretun 活动臂: lever arm分流锥: spure sperader 水口司: bush垃圾钉: stop pin 隔片: buffle弹弓柱: spring rod 弹弓: die spring中托司: ejector guide bush 中托边: ejector guide pin镶针: pin 销子: dowel pin波子弹弓: ball catch模具成形不良用语英汉对照aberration 色差 atomization ? 化bank mark ? 料纹 bite 咬入blacking hole 涂料孔(铸疵) blacking scab 涂料疤blister 起泡blooming 起霜low hole 破孔 blushing 泛白body wrinkle 侧壁皱纹 breaking-in 冒口带肉bubble 膜泡 burn mark 糊斑burr 毛边 camber 翘曲cell 气泡 center buckle 表面中部波皱 check 细裂痕 checking 龟裂chipping 修整表面缺陷 clamp-off 铸件凹痕collapse 塌陷 colormottle 色斑corrosion 腐蚀 crack 裂痕crazing 碎裂 crazing 龟裂deformation 变形 edge 切边碎片edge crack 裂边 fading 退色filler speak 填充料斑 fissure 裂纹flange wrinkle 凸缘起皱 flaw 刮伤flow mark 流痕 galling 毛边glazing 光滑 gloss 光泽grease pits 污斑 grinding defect 磨痕haircrack 发裂 haze 雾度incrustation 水锈 indentation 压痕internal porosity 内部气孔mismatch 偏模mottle 斑点 necking 缩颈nick 割痕 orange peel 橘皮状表面缺陷overflow 溢流 peeling 剥离pit 坑 pitting corrosion 点状腐蚀plate mark 模板印痕 pock 麻点pock mark 痘斑resin streak 树脂流纹resin wear 树脂脱落riding 凹陷sagging 松垂 saponification 皂化scar 疤痕 scrap 废料scrap jam 废料阻塞scratch 刮伤/划痕scuffing 深冲表面划伤seam 裂痕shock line 模口挤痕 short shot 充填不足shrinkage pool 凹孔sink mark 凹痕skin inclusion 表皮折叠straightening 矫直streak 条状痕surface check 表面裂痕surface roughening 橘皮状表皮皱折surging 波动sweat out 冒汗 torsion 扭曲warpage 翘曲 waviness 波痕webbing 熔塌 weld mark 焊痕whitening 白化 wrinkle 皱纹各式模具分类用语英汉对照landed plunger mold 有肩柱塞式模具burnishing die 挤光模landed positive mold 有肩全压式模具button die 镶入式圆形凹模 loading shoe mold 料套式模具center-gated mold 中心浇口式模具loose detail mold 活零件模具chill mold 冷硬用铸模 loose mold 活动式模具clod hobbing 冷挤压制模louvering die 百叶窗冲切模composite dies 复合模具 manifold die 分歧管模具counter punch 反凸模 modular mold 组合式模具double stack mold 双层模具multi-cavity mold 多模穴模具electroformed mold 电铸成形模multi-gate mold 复式浇口模具expander die 扩径模offswt bending die 双折冷弯模具extrusion die 挤出模 palletizing die 叠层模family mold 反套制品模具 plaster mold 石膏模blank through dies 漏件式落料模porous mold 通气性模具duplicated cavity plate 复板模 positive mold 全压式模具fantail die 扇尾形模具 pressure die 压紧模fishtail die 鱼尾形模具 profile die 轮廓模flash mold 溢料式模具 progressive die 顺序模gypsum mold 石膏铸模 protable mold 手提式模具hot-runner mold 热流道模具prototype mold 雏形试验模具ingot mold 钢锭模 punching die 落料模lancing die 切口模 raising(embossing) 压花起伏成形re-entrant mold 倒角式模具 sectional die 拼合模runless injection mold 无流道冷料模具 sectional die 对合模具segment mold 组合模 semi-positive mold 半全压式模具shaper 定型模套 single cavity mold 单腔模具solid forging die 整体锻模 split forging die 拼合锻模split mold 双并式模具sprueless mold 无注道残料模具squeezing die 挤压模 stretch form die 拉伸成形模sweeping mold 平刮铸模 swing die 振动模具three plates mold 三片式模具 trimming die 切边模unit mold 单元式模具universal mold 通用模具unscrewing mold 退扣式模具 yoke type die 轭型模各种模具常用成形方式英汉对照accurate die casting 精密压铸powder forming 粉末成形calendaring molding 压延成形powder metal forging 粉末锻造cold chamber die casting 冷式压铸 precision forging 精密锻造cold forging 冷锻 press forging 冲锻compacting molding 粉末压出成形 rocking die forging 摇动锻造compound molding 复合成形rotary forging 回转锻造compression molding 压缩成形 rotational molding 离心成形dip mold 浸渍成形 rubber molding 橡胶成形encapsulation molding 注入成形 sand mold casting 砂模铸造extrusion molding 挤出成形 shell casting 壳模铸造foam forming ? 泡成形 sinter forging 烧结锻造forging roll 轧锻 six sides forging 六面锻造gravity casting 重力铸造 slush molding 凝塑成形hollow(blow) molding 中空(吹出)成形 squeeze casting 高压铸造hot chamber die casting 热室压铸 swaging 挤锻hot forging 热锻 transfer molding 转送成形injection molding 射出成形 warm forging 温锻investment casting 精密铸造 matched die method 对模成形法laminating method 被覆淋膜成形 low pressure casting 低压铸造lost wax casting 脱蜡铸造 matched mould thermal forming 对模热成形模机械类常用英语:冲压模具-零件类Punch 冲头 insert 入块(嵌入件)deburring punch 压毛边冲子 groove punch 压线冲子stamped punch 字模冲子 round punch 圆冲子special shape punch 异形冲子 bending block 折刀roller 滚轴 baffle plate 挡块located block 定位块 supporting block for location 定位支承块air cushion plate 气垫板 air-cushion eject-rod 气垫顶杆trimming punch 切边冲子 stiffening rib punch = stinger 加强筋冲子ribbon punch 压筋冲子 reel-stretch punch 卷圆压平冲子guide plate 定位板 sliding block 滑块sliding dowel block 滑块固定块 active plate 活动板lower sliding plate 下滑块板 upper holder block 上压块upper mid plate 上中间板 spring box 弹簧箱spring-box eject-rod 弹簧箱顶杆 spring-box eject-plate 弹簧箱顶板bushing block 衬套 cover plate 盖板guide pad 导料块模具工程常用词汇英汉对照——3high-speed transmission 高速传递 heat dissipation 热传rack 上料 degrease 脱脂rinse 水洗 alkaline etch 龄咬desmut 剥黑膜 D.I. rinse 纯水次Chromate 铬酸处理 Anodize 阳性处理Seal 封孔 Revision 版次part number/P/N 料号 good products 良品scraped products 报放心品 defective products 不良品finished products 成品 disposed products 处理品barcode 条码 flow chart 流程表单assembly 组装 stamping 冲压molding 成型 spare parts=buffer 备品coordinate 座标 dismantle the die 折模auxiliary fuction 辅助功能 poly-line 多义线heater band 加热片 thermocouple 热电偶sand blasting 喷沙 grit 砂砾derusting machine 除锈机 degate 打浇口dryer 烘干机 induction 感应induction light 感应光response=reaction=interaction 感应ram 连杆 edge finder 巡边器concave 凸 convex 凹short 射料不足 nick 缺口speck 瑕?? Shine 亮班splay 银纹 gas mark 焦痕delamination 起鳞 cold slug 冷块blush 导色 gouge 沟槽;凿槽satin texture 段面咬花 witness line 证示线patent 专利 grit 沙砾granule=peuet=grain 细粒 grit maker 抽粒机cushion 缓冲 magnalium 镁铝合金magnesium 镁金 metal plate 钣金lathe 车 mill 锉plane 刨 grind 磨drill 铝 boring 镗blinster 气泡 fillet 镶;嵌边through-hole form 通孔形式 voller pin formality 滚针形式cam driver 铡楔 shank 摸柄crank shaft 曲柄轴 augular offset 角度偏差velocity 速度 production tempo 生产进度现状torque 扭矩spline=the multiple keys 花键quenching 淬火tempering 回火annealing 退火 carbonization 碳化alloy 合金 tungsten high speed steel 钨高速的moly high speed steel 钼高速的organic solvent 有机溶剂bracket 小磁导 liaison 联络单volatile 挥发性 resistance 电阻ion 离子 titrator 滴定仪beacon 警示灯 coolant 冷却液crusher 破碎机模具工程常用词汇英汉对照——2stock age analysis sheet 库存货龄分析表 on-hand inventory 现有库存available material 良品可使用 obsolete material 良品已呆滞to be inspected or reworked 待验或重工 total 合计cause description 原因说明 part number/ P/N 料号type 形态 item/group/class 类别quality 品质 prepared by 制表notes 说明 physical inventory 盘点数量year-end physical inventory difference analysis sheet 年终盘点差异分析表physical count quantity 帐面数量 difference quantity 差异量cause analysis 原因分析 raw materials 原料materials 物料 finished product 成品semi-finished product 半成品 packing materials包材disposed goods 处理品 warehouse/hub 仓库on way location 在途仓 oversea location 海外仓spare parts physical inventory list 备品盘点清单spare molds location 模具备品仓 skid/pallet 栈板tox machine 自铆机 wire EDM 线割EDM放电机coil stock 卷料 sheet stock 片料tolerance 工差 score=groove 压线cam block 滑块 pilot 导正筒trim 剪外边 pierce 剪内边drag form 压锻差 pocket for the punch head 挂钩槽slug hole 废料孔 feature die 公母模expansion dwg 展开图 radius 半径shim(wedge) 楔子 torch-flame cut 火焰切割set screw 止付螺丝 form block 折刀stop pin 定位销 round pierce punch=die button 圆冲子shape punch=die insert 异形子 stock locater block 定位块under cut=scrap chopper 清角 active plate 活动板baffle plate 挡块 cover plate 盖板male die 公模 female die 母模groove punch 压线冲子 air-cushion eject-rod 气垫顶杆spring-box eject-plate 弹簧箱顶板 bushing block 衬套insert 入块 club car 高尔夫球车capability 能力 parameter r参数factor 系数 phosphate 皮膜化成viscosity 涂料粘度 alkalidipping 脱脂main manifold 主集流脉 bezel 斜视规blanking 穿落模 dejecting 顶固模demagnetization 去磁;消磁模具钢材及零件英语模具钢材alloy tool steel 合金工具钢 aluminium alloy 铝合金钢bearing alloy 轴承合金 blister steel 浸碳钢bonderized steel sheet 邦德防蚀钢板 carbon tool steel 碳素工具钢clad sheet 被覆板 clod work die steel 冷锻模用钢emery 金钢砂 ferrostatic pressure 钢铁水静压力forging die steel 锻造模用钢 galvanized steel sheet 镀锌铁板hard alloy steel 超硬合金钢 high speed tool steel 高速度工具钢hot work die steel 热锻模用钢 low alloy tool steel 特殊工具钢low manganese casting steel 低锰铸钢 marging steel 马式体高强度热处理钢martrix alloy 马特里斯合金 meehanite cast iron 米汉纳铸钢meehanite metal 米汉纳铁 merchant iron 市售钢材molybdenum high speed steel 钼系高速钢 molybdenum steel 钼钢nickel chromium steel 镍铬钢 prehardened steel 顶硬钢silicon steel sheet 硅钢板 stainless steel 不锈钢tin plated steel sheet 镀锡铁板 tough pitch copper 韧铜troostite 吐粒散铁 tungsten steel 钨钢vinyl tapped steel sheet 塑料覆面钢板塑件&模具相关英文compre sion molding 压缩成型 flash mold 溢流式模具plsitive mold 挤压式模具 split mold 分割式模具cavity 型控母模 core 模心公模taper 锥拔 leather cloak 仿皮革shiver 饰纹 flow mark 流痕welding mark 溶合痕 post screw insert 螺纹套筒埋值self tapping screw 自攻螺丝 striper plate 脱料板piston 活塞 cylinder 汽缸套chip 细碎物handle mold 手持式模具移转成型用模具encapsulation molding低压封装成型射出成型用模具two plate两极式(模具)well type 蓄料井 insulated runner 绝缘浇道方式hot runner 热浇道 runner plat 浇道模块valve gate 阀门浇口 band heater 环带状的电热器spindle 阀针 spear head 刨尖头slag well 冷料井 cold slag 冷料渣air vent 排气道 h=0.02~0.05mm w=3.2mm L=3~5mmwelding line 熔合痕 eject pin 顶出针knock pin 顶出销 return pin 回位销反顶针sleave 套筒 stripper plate 脱料板insert core 放置入子 runner stripper plate 浇道脱料板guide pin 导销 eject rod (bar) (成型机)顶业捧subzero 深冷处理 three plate 三极式模具runner system 浇道系统 stress crack 应力电裂orientation 定向 sprue gate 射料浇口,直浇口nozzle 射嘴 slag well 冷料井side gate 侧浇口 edge gate 侧缘浇口tab gate 搭接浇口 film gate 薄膜浇口flash gate 闸门浇口 slit gate 缝隙浇口fan gate 扇形浇口dish gate 因盘形浇口 H=F=1/2t~1/5t T=2.5~3.5mmdiaphragm gate 隔膜浇口 ring gate 环形浇口subarine gate 潜入式浇口 tunnel gate 隧道式浇口pin gate 针点浇口Φ0.8~1.0mm Runner less 无浇道(sprue less) 无射料管方式 long nozzle 延长喷嘴方式Sprue 浇口;溶渣 sprue lock pin 料头钩销(拉料杆)塑件模具相关英文——2eject pin 顶出针 knock pin 顶出销return pin 回位销反顶针 sleave 套筒stripper plate 脱料板 insert core 放置入子runner stripper plate 浇道脱料板 guide pin 导销eject rod (bar) (成型机)顶业捧 subzero 深冷处理three plate 三极式模具 runner system 浇道系统stress crack 应力电裂 orientation 定向sprue gate 射料浇口,直浇口 nozzle 射嘴sprue lock pin 料头钩销(拉料杆) slag well 冷料井塑件模具相关英文——1compre sion molding 压缩成型 flash mold 溢流式模具plsitive mold 挤压式模具 split mold 分割式模具cavity 型控母模 core 模心公模taper 锥拔 leather cloak 仿皮革shiver 饰纹 flow mark 流痕welding mark 溶合痕post screw insert 螺纹套筒埋值self tapping screw 自攻螺丝 striper plate 脱料板piston 活塞 cylinder 汽缸套chip 细碎物 handle mold 手持式模具encapsulation molding 低压封装成型、射出成型用模具hot runner 热浇道 runner plat 浇道模块band heater 环带状的电热器 spindle 阀针spear head 刨尖头 cold slag 冷料渣模具相关英语——7Embosss 凸点 dome 凸圆semi-shearing 半剪 stamp mark 冲记号deburr or coin 压毛边 punch riveting 冲压铆合side stretch 侧冲压平 reel stretch 卷圆压平groove 压线 blanking 下料stamp letter 冲字(料号) shearing 剪断tick-mark nearside 正面压印 tick-mark farside 反面压印五金零件类inner guiding post 内导柱inner hexagon screw 内六角螺钉dowel pin 固定销 coil spring 弹簧lifter pin 顶料销 eq-height sleeves=spool 等高套筒pin 销 lifter guide pin 浮升导料销guide pin 导正销 wire spring 圆线弹簧outer guiding post 外导柱模具工程类plain die 简易模 pierce die 冲孔模forming die 成型模 progressive die 连续模gang dies 复合模 shearing die 剪边模riveting die 铆合模 pierce 冲孔forming 成型(抽凸,冲凸) draw hole 抽孔bending 折弯 trim 切边101个热处理常用英文词汇1. indication 缺陷2. test specimen 试样3. bar 棒材4. stock 原料5. billet 方钢,钢方坯6. bloom 钢坯,钢锭7. section 型材 8. steel ingot 钢锭9. blank 坯料,半成品 10. cast steel 铸钢11. nodular cast iron 球墨铸铁 12. ductile cast iron 球墨铸铁13. bronze 青铜 14. brass 黄铜15. copper 合金 16. stainless steel 不锈钢17. decarburization 脱碳 18. scale 氧化皮19. anneal 退火 20. process anneal 进行退火21. quenching 淬火 22. normalizing 正火23. Charpy impact text 夏比冲击试验 24. fatigue 疲劳25. tensile testing 拉伸试验 26. solution 固溶处理27. aging 时效处理 28. Vickers hardness 维氏硬度29. Rockwell hardness 洛氏硬度30. Brinell hardness 布氏硬度31. hardness tester 硬度计32. descale 除污,除氧化皮等33. ferrite 铁素体34. austenite 奥氏体35. martensite 马氏体 36. cementite 渗碳体37. iron carbide 渗碳体 38. solid solution 固溶体39. sorbite 索氏体 40. bainite 贝氏体41. pearlite 珠光体 44. grain 晶粒42. nodular fine pearlite/ troostite 屈氏体 45. chromium 铬43. black oxide coating 发黑 46. cadmium 镉47. tungsten 钨 48. molybdenum 钼49. manganese 锰 50. vanadium 钒52. silicon 硅 53. sulfer/sulphur 硫54. phosphor/ phosphorus 磷 55. nitrided 氮化的56. case hardening 表面硬化,表面淬硬 57. air cooling 空冷58. furnace cooling 炉冷 59. oil cooling 油冷60. electrocladding /plating 电镀 61. brittleness 脆性62. strength 强度 63. rigidity 刚性,刚度64. creep 蠕变 65. deflection 挠度66. elongation 延伸率 67. yield strength 屈服强度68. elastoplasticity 弹塑性 69. metallographic structure 金相组织70. metallographic test 金相试验 71. carbon content 含碳量72. induction hardening 感应淬火 73. impedance matching 感应淬火74. hardening and tempering 调质 75. crack 裂纹76. shrinkage 缩孔,疏松 77. forging 锻(件)78. casting 铸(件) 79. rolling 轧(件)80. drawing 拉(件) 81. shot blasting 喷丸(处理)82. grit blasting 喷钢砂(处理) 83. sand blasting 喷砂(处理)84. carburizing 渗碳 85. nitriding 渗氮86. ageing/aging 时效 87. grain size 晶粒度88. pore 气孔 89. sonim 夹砂90. cinder inclusion 夹渣91. lattice 晶格93. spectrum analysis 光谱分析 94. heat/thermal treatment 热处理95. inclusion 夹杂物 96. segregation 偏析97. picking 酸洗,酸浸 98. residual stress 残余应力99. remaining stress 残余应力 101. stress relief 应力释放100. relaxation of residual stress 消除残余应力92. abrasion/abrasive/rub/wear/wearing resistance (property) 耐磨性模具相关英语(5)semi-shearing 半剪 stamp mark 冲记号deburr or coin 压毛边 punch riveting 冲压铆合side stretch 侧冲压平 reel stretch 卷圆压平groove 压线 blanking 下料stamp letter 冲字(料号) shearing 剪断tick-mark nearside 正面压印 tick-mark farside 反面压印冲压名称类extension dwg 展开图 procedure dwg 工程图die structure dwg 模具结构图 material 材质material thickness 料片厚度 factor 系数upward 向上 downward 向下press specification 冲床规格 die height range 适用模高die height 闭模高度 burr 毛边gap 间隙 weight 重量total wt. 总重量 punch wt. 上模重量五金零件类inner guiding post 内导柱inner hexagon screw 内六角螺钉dowel pin 固定销 coil spring 弹簧lifter pin 顶料销 eq-height sleeves=spool 等高套筒pin 销 lifter guide pin 浮升导料销guide pin 导正销 wire spring 圆线弹簧outer guiding post 外导柱 stop screw 止付螺丝located pin 定位销 outer bush 外导套模板类top plate 上托板(顶板) top block 上垫脚punch set 上模座 punch pad 上垫板punch holder 上夹板 stripper pad 脱料背板up stripper 上脱料板 male die 公模(凸模)feature die 公母模 female die 母模(凹模)upper plate 上模板 lower plate 下模板die pad 下垫板 die holder 下夹板die set 下模座 bottom block 下垫脚bottom plate 下托板(底板) stripping plate 内外打(脱料板) outer stripper 外脱料板 inner stripper 内脱料板lower stripper 下脱料板注塑模部分中英文对照塑料成形模具 mould for plastics热塑性塑料模 mould for thermoplastics热固性塑料模 mould for thermosets压缩模 compression mould压注模、传递模 transfer mould注射模 injection mould热塑性塑料注射模 injection mould for thermoplastics热固性塑料注射模 injection mould for thermoses序号中文英语日语港台俗称定模座板 fixed clamp plate, top clamping plate. top plate动模座板moving clamp plate. bottom clamping plate. bottom plate 上模座板 upper clamping plate下模座板 lower clamping plate凹模固定板 cavity-retainer plate型芯固定板 core-retainer plate凸模固定板 punch-retainer plate模套 chase. bolster. frame支承板 backing plate. supprr plate垫块 spacer parallel支架 ejector housing. mould base leg中文查英文:英语查中文根据国家标准,以下为部分压铸模具术语的标准翻译。

模具术语翻译

模具术语翻译

模具名词中英文对照表序号中文名英文名1 一、水口gate2 进水位gate location3 水口形式gate type4 大水口edge gate5 细水口 pin-point gate6 水口大小gate size7 转水口switching gate8 唧嘴口径sprue diameter9 二、流道runner10 热流道hot runner11 冷流道cold runner12 唧嘴直流direct sprue gate13 圆形流道round runner14 模流分析mold flow analysis15 流道平衡runner balance16 热嘴hot sprue17 热流道板hot manifold18 发热管cartridge heater19 探针thermocouples20 插头connector plug21 插座 connector socket22 密封/封料 seal23 三、运水water line24 喉塞line pug25 喉管tube26 塑胶管plastic tube27 快速接头jiffy quick connector plug28 四、模具零件mold components29 三板模three-plate mold模具名词中英文对照表序号中文名英文名30 二板模two-plate mold31 边钉/导边leader pin/guide pin32 边司/导套bushing/guide bushing33 顶针板ejector retainer plate34 托板support plate35 螺丝 screw36 管钉dowel pin37 开模槽ply bar score38 内模管位core/cavity inter-lock39 顶针ejector pin40 司筒ejector sleeve41 司筒针ejector pin42 推板stripper plate43 缩呵movable core44 扣机(尼龙拉勾) nylon latch lock45 斜顶lifter46 模胚(架) mold base47 母模cavity insert48 公模core insert49 行位(滑块) slide50 镶件insert51 压座/斜鸡wedge52 耐磨板/油板wedge wear plate53 压条plate54 撑头support pillar55 唧嘴 sprue bushing56 挡板stop plate57 定位圈locating ring58 锁扣latch模具名词中英文对照表序号中文名英文名59 扣鸡parting lock set60 推杆push bar61 栓打螺丝S.H.S.B62 顶板ejector plate63 活动臂lever arm64 水口司bush65 垃圾钉stop pin66 隔片buffle67 弹弓柱spring rod68 弹弓die spring69 镶针pin70 销子dowel pin71 波子弹弓ball catch72 喉塞pipe plug73 锁模块lock plate74 斜顶angle from pin75 斜顶杆angle ejector rod76 尼龙拉勾parting locks77 复位键、提前回杆early return bar78 气阀valves79 斜导边angle pin80 模排气parting line venting81 模总高超出啤机规格mold base shut height82 模胚原身出料位cavity direct cut on A-plate,coredirect cut on B-plate.83 不准用镶件Do not use (core/cavity) insert84 用铍铜做镶件use beryllium copper insert85 强度不够insufficient rigidity86 公差tolerance87 铜公(电极) copper electrode动模 Movable Mould Moving Half定模座板 Fixed Clamp Plate Top Clamping Plate Top Plate动模座板 Moving Clamp Plate Bottom Clamping Plate Bottom Plate 上模座板 Upper Clamping Plate下模座板 Lower Clamping Plate凹模固定板 Cavity-retainer Plate型芯固定板 Mould Core-retainer Plate凸模固定板 Punch-retainer Plate模套 Die Body Die Sleeve Die Blank支承板 Backing Plate Support Plate垫块 Spacer Parallel支架 Ejector Housing Mould Base Leg模头 Die Head根据国家标准,以下为部分压铸模具术语的标准翻译。

模具专业词汇中英文对照表

模具专业词汇中英文对照表

die 模具figure file,chart file图档cutting die,blanking die冲裁模progressive die, follow (-on)die 连续模compound die复合模punched hole冲孔panel board镶块to cutedges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line streching, line pulling线拉伸engraving,to engrave刻印upsiding down edges翻边to stake铆合design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate,front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点incoming material to be inspected进货待验PCE assembly production schedule sheetPCE组装厂生产排配表model机锺work order工令revision版次production control confirmation生产确认checked by初审approved by核准stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工cause description原因说明part number/ P/N 料号item/group/class类别prepared by制表year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异量good product/accepted goods/ accepted parts/good parts良品defective product/non—good parts不良品disposed goods处理品on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject—rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D。

模切词汇汇总

模切词汇汇总

1.hing lid carton:硬翻小盒2.outer carton: 条盒3. 2 across ×6 around: 2×6 ( 排版)4.segment/cuttinginsert:刀块5.reconditioning/resharpening: 修磨6.Register Marks:十字模切压痕套准线7.Glue perforations:糊胶刃8.Arrow head:小飞机9.Blank numbers/Productnumbers:记号刃10.coating:涂层11.crease perforations:折痕刃12.hockey stick:“曲棍”刃(相对于小飞机位置)13.gold stamping:金烫/烫金、14.Bearing:轴承15.gear/the toothed wheel:齿轮16.cassette:滑块17.gravure printing:凹印18.Flexo printing:柔印19.Offset printing:胶印20.paperboard:卡纸21.pure wood pulp:纯木浆22.Flip top box/hard pack:硬翻烟标23.Out of register: 套印不准24.Rotary die cutting 圆压圆模切25.Rotary creasing 圆压圆压痕26.Rotary embossing 圆压圆压凸27.punching 冲孔28.Platen die-cutting 平压平模切29.Screw螺丝30.CRC die cutting( Crushcut ):压切31.DKC die cutting ( Dualknife): 剪切32.cylinder:辊子33.Wrap –around plates:磁性刀34.hydraulic pump:液压泵35.Assembly/disassembly:安装/拆卸36.conical bearer:锥度辊枕37.Operation side: 操作侧38.Driving side: 联机侧39.bearing clearance:轴承游隙40.axial:轴向的41.Stripping pin: 扎针42.Finger trim: 清废铲43.eccentric:偏心销44.washer:垫圈45.cylindrical pin: 圆柱销46.shim/spacer:垫块/垫片47.Meshing: 互啮48.Clockwise:顺时针方向49.Anticlockwise:逆时针方向50.Tighten:拧紧51.feeler gauge:塞尺52.bearer/ the runningtreads: 辊枕53.anvil roller: 砧辊54.blacklash setting:齿隙调整55.length register 纵向调整56.Imprint:印迹57.Gap:间隙58.cylinder bending:辊子弯曲度/挠度59.rubber pin: 橡胶钉60.underlay foil 铝箔垫片61.abrasion: 磨损量62.Spare parts/ back-upsegment: 备块63.the counter sample: 打样64.product drawing:产品图/单元图yout:排版图66.Greasing felt:毛刷the:车床、ling machine 铣床69.Roughing:粗磨70.external grinding 外圆磨71.Numerical control 数控72.Inspection: 检验73.Quenching:淬火74.precision grinding:精磨75.Final finishing/Sharpening knife edge:修角76.accuracy/tolerance 精度/误差77.shaft drawing: 轴体图78.burr 毛刺79.hardness:硬度80.cavity and core plates凹模和凸模板81.die 模具82.dowel 销子83.fitter 装配工,钳工84.groove/ recess 凹槽, 凹座,凹进处85.lubrication 润滑86.machining 加工87.maintenance 维护,维修88.microns 微米89.on-line 联机90.piston 活塞91.raw material 原材料92.rotate (使)旋转93.rough machining 粗加工/前加工94.scrap 废料,边角料,切屑95.servo mechanism 伺服机构96.spark erosion 火花蚀刻97.spindle 主轴98.spline 花键99.tapered 锥形的100.tempering 回火101.turning 车削102.Caliper卡尺103.Height Gage高度尺104.Inside Micrometer内径千分尺105.Microscope显微镜106.Hardness testing machines硬度机107.硬盒 - hard-pack ,flick-top box软盒 - soft-pack一小盒的那种 - pack,packet条盒,条装 - carton“小盒”locket“条盒”slip case “软标”soft label小盒: pack条盒: carton软标: soft pack材料:Adhesive 不干胶Mesh 无纺布PET 聚酯材料Poron 泡棉其他相关词汇Gear 齿轮Tooth number 齿数Pitch 单元间距Across 横排Around 圆周排Kiss cut 半切Through cut 全切Repeat 周长Top cutter 上切刀Bottom cutter 下切刀Edge height 刀刃高度Tolerance 误差Hardness 硬度Drawing unit 单元图Layout drawing 排版图Cutting edge/ line 模切刃Glue edge/ glue perforations糊胶刃Creasing edge/perforations压痕刃Driven gear/transmissiongear 传动齿轮Couple gear/ meshing gear互啮齿轮Cutting segment 模切刀块Anvil roller 砧辊Block/slider滑块Gap/clearance 间隙Gasket 垫片Chamfer 倒角Numerical control center 数控中心Quench 淬火Heat treatment 热处理Lather 车床Drill press 钻床Milling machine 铣床Grinder 磨床Cassette 齿轮和滑块组合Register 套准Pressure 压力Jogging 点动Conveyor belt 传送带Hydraulic pump 液压泵Doctor blade 刮墨刀Dancing roller 导纸辊Driving side 联机侧Operator side 操作侧Blank/flip top box 烟标Circumference/perimeter周长Cylinder 辊Register mark 套准刃Shaft 轴Synchronise 校准Adjust 调整Bearer 滚枕Bearing 轴承Felt 毛刷Stripping finger/fingertrim/scraping finger清废铲Infeed cutting 横切Lyre 槽,内档Conical bearer 锥度辊枕Pressure gauge 压力计Antideflexion adjustments纠偏调整Plate 连接板Backlash gear 消隙齿轮Arrowhead 小飞机Hockey 曲棍刃Round corner 圆角Generic embossing 分块式压凸Solid embossing 整辊式压凸Incremental change 递增量Roughing 粗磨External grinding 外圆磨Abrasion 磨损量Resharpening/reconditioning 修磨DRC die cutting( Crush cut) 压切DKC die cutting(Dual knife)剪切Wrap- around plates 磁性刀Assembly/ disassembly 安装/拆卸D rawing Unit: 单元图[drɔ:iŋ] [’ju:nit]Layout(常用)/Typesetting Drawing: 排版图['taip,setiŋ]Shaft drawing(常用)/Axis Drawing: 轴体图['æksis]cutting edge/cutting line(常用): 模切刃creasing edge/crease perforations(常用): 压痕刃/折痕刃[kri:s][edʒ]glue edge/Glue perforations(常用): 糊胶刃driven gear(常用)/transmission gear: 传动齿轮[drivən][ɡiə][trænz'miʃən]couple gear(常用)/meshing gear: 互啮齿轮Tooth number: 齿数cutting segments/die: 刀块anvil roller: 砧辊['ænvil] ['rəulə]block/slider: 滑块[blɔk]['slaidə]gap/ clearance: 间隙['kliərəns]gasket: 垫片['ɡæskit]chamfer: 倒角['tʃæmfə]numerical control center:数控中心[nju:'merikəl][kən'trəul]quench: 淬火[kwentʃ]heat treatment 热处理:lather: 车床['læðə]drill press: 钻床milling machine: 铣床[mə'ʃi:n]grinder: 磨床['ɡraində]cassette: (齿轮和滑块组合)register: 套准['redʒistə]pressure: 压力['preʃə]jogging: 点动['dʒɔɡiŋ]conveyor belt: 传送带[kən'veiə]hydraulic pump: 液压泵[hai'drɔ:lik][pʌmp]doctor blade: 刮墨刀,刮粉刀dancing roll/dancingroller: 导纸辊['rəulə]driving side: 联机侧operator side: 操作侧['ɔpəreitə]Blank(常用)/flip top box:烟标circumference(perimeter): 周长[sə'kʌmfərəns][pə'rimitə]across: 横排[ə'krɔs]around: 圆周排[ə'raund]cylinder: 圆筒,辊['silində]register mark: 套准刃['redʒistə]shaft: 轴synchronise: 校准['siŋkrənaiz]adjust: 调整[ə'dʒʌst]bearer: 辊枕felt: 毛刷/毛毡stripping finger/finger trim/scrapping fingers: 清废铲infeed cutting: 横切lyre: 槽,内档['laiə]conical bearer: 锥度辊枕['kɔnikəl]anvil roller: 砧辊pressure gauge: 压力计[ɡeidʒ]antideflexion adjustment: 纠偏调整plate: 连接板backlash gear: 消隙齿轮['bæk,læʃ]arrowhead: “小飞机”/箭头hockey: “曲棍刃'['hɔki]round corner: 圆角['kɔ:nə]generic embossing: 分块式压凸[dʒi'nerik] [im'bɔsiŋ]solid embossing: 整辊式压凸dancing roll: 导纸辊incremental change: 递增量[,inkri'mentəl]roughing: 粗磨External grinding: 外圆磨[ik'stə:nəl]abrasion: 磨损量[ə'breiʒən]resharpening/reconditioning: 修磨CRC die cutting: 压切DKC die cutting: 剪切wrap-around plates: 磁性刀[ræp]assembly/disassembly:安装/拆卸[ə'sembli]。

模具名词专业英语

模具名词专业英语

推板 打杆 卸料螺钉 拉杆 托杆 托板 弹顶器 承料板 压料板 压边圈 齿圈压板 导向零件 导柱 导套 导板 弹压导板 钢球保持圈 固定零件 上模座 下模座 凸模固定板 凹模固定板 垫板 模柄 浮动模柄 滑块 冲裁间隙 模具闭合高度 压力机闭合高度 压力中心 冲模中心 冲压方向 送料方向
ejector plate knock out pin stripper bolt tie rod pressure pin(cushion pin) supporting plate cushion stock supporting plate pressure plate blank holder serrated ring guide elements guide pillar guide bushes guide plate spring guide plate cage retaining elements punch holder die holder punch plate matrix plate backing plate shank self-centering shank cam driver slide block blanking clearance die shut height shut height of press machine center of load center for die pressing direction feed direction
upsetting barril die first upsetting die final upsetting die mould opening force ejection force core-pulling distance mould shut height maximum daylingt projeted orea draft die-casting die-casting die fixed die fixed die plate bolstor fixed die moving die movable core thread plug sorue runner gate overflow well forging die open forging die closed forging die hammer forging die mechanical press forging die upset forging die forge rolling die screw press die cold heading die high speed hammer forging die straightening die coing die

模具术语中英文对照大全

模具术语中英文对照大全

更多资料请访问.(.....)c:\iknow\docshare\data\cur_work\.....\模具术语中英文对照,全面、精选时间:2005-8-23 10:04:22国际模具网第一期:组装、冲压、喷漆等专业词汇Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条形码barcode scanner条形码扫描仪fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长ME制造工程师MT制造技术cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝lbs.inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis |'∫æsi| 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试Voltage switch of SPS电源电压接柆键sheet metal parts 冲件plastic parts塑料件SOP制造作业程序material check list物料检查表work cell工作间trolley台车carton纸箱sub-line支线left fork叉车personnel resource department人力资源部production department生产部门planning department企划部QC Section品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备uncoiler and straightener整平机punching machine 冲床robot机械手hydraulic machine油压机lathe车床|刨床 planer |'pleinmiller铣床grinder磨床driller钻床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager |'depjuti| =vice manager副理section supervisor课长deputy section supervisor =vice section superisor副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装to apply oil擦油to file burr 锉毛刺final inspection终检to connect material接料to reverse material 翻料wet station沾湿台Tiana天那水cleaning cloth抹布to load material上料to unload material卸料to return material/stock to退料scraped |'skræpid|报废scrape ..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturing procedure制程不良n|氧化↔oxidation |' ksi'deiscratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良mp|镶块∧embeded lump|in'bed| |l feeding is not in place送料不到位stamping-missing漏冲production capacity生产力education and training教育与训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓name of a department部门名称administration/general affairs dept总务部automatic screwdriver电动启子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzle蜂鸣器defective product label不良标签identifying sheet list标示单screwdriver holder起子插座pedal踩踏板stopper阻挡器flow board流水板hydraulic handjack油压板车forklift叉车pallet栈板glove(s)手套glove(s) with exposed fingers割手套thumb大拇指forefinger食指midfinger中指ring finger无名指little finger小指band-aid创可贴iudustrial alcohol工业酒精alcohol container沾湿台head of screwdriver起子头sweeper扫把mop拖把vaccum cleaner吸尘器rag 抹布garbage container灰箕garbage can垃圾箱garbage bag垃圾袋chain链条jack升降机production line流水线chain链条槽magnetizer加磁器lamp holder灯架to mop the floor拖地to clean the floor扫地to clean a table擦桌子air pipe 气管packaging tool打包机packaging打包missing part漏件wrong part错件excessive defects过多的缺陷critical defect极严重缺陷major defect主要缺陷minor defect次要缺陷not up to standard不合规格dimension/size is a little bigger尺寸偏大(小) cosmetic defect外观不良slipped screwhead/slippery screw head螺丝滑头slipped screwhead/shippery screw thread滑手speckle斑点mildewed=moldy=mouldy发霉rust生锈deformation变形burr(金属)flash(塑件)毛边poor staking铆合不良excesssive gap间隙过大grease/oil stains油污inclusion杂质painting peel off脏污shrinking/shrinkage缩水mixed color杂色scratch划伤poor processing 制程不良poor incoming part事件不良fold of pakaging belt打包带折皱painting make-up补漆discoloration羿色water spots水渍polishing/surface processing表面处理exposed metal/bare metal金属裸露lack of painting烤漆不到位safety安全quality品质delivery deadline交货期cost成本engineering工程die repair模修enterprise plan = enterprise expansion projects企划QC品管die worker模工production, to produce生产equipment设备to start a press开机stop/switch off a press关机classification整理regulation整顿cleanness清扫conservation清洁culture教养qualified products, up-to-grade products良品defective products, not up-to-grade products不良品waste废料board看板feeder送料机sliding rack滑料架defective product box不良品箱die change 换模to fix a die装模to take apart a die拆模to repair a die修模packing material包材basket蝴蝶竺plastic basket胶筐isolating plate baffle plate; barricade隔板carton box纸箱to pull and stretch拉深to put material in place, to cut material, to input落料to impose lines压线to compress, compressing压缩character die字模to feed, feeding送料transportation运输(be)qualfied, up to grade合格not up to grade, not qualified不合格material change, stock change材料变更feature change 特性变更evaluation评估prepare for, make preparations for 准备parameters参数rotating speed, revolution转速manufacture management制造管理abnormal handling异常处理production unit生产单位lots of production生产批量steel plate钢板roll material卷料manufacture procedure制程operation procedure作业流程to revise, modify修订to switch over to, switch---to throw--over switching over切换engineering, project difficulty工程瓶颈stage die工程模automation自动化to stake, staking, reviting铆合add lubricating oil加润滑油shut die架模shut height of a die架模高度analog-mode device类模器die lifter举模器argon welding氩焊vocabulary for stamping冲压常词汇stamping, press冲压punch press, dieing out press冲床uncoiler & strainghtener整平机feeder送料机rack, shelf, stack料架cylinder油缸robot机械手taker取料机conveyer belt输送带transmission rack输送架top stop上死点bottom stop下死点one stroke一行程inch寸动to continue, cont.连动to grip(material)吸料location lump, locating piece, block stop 定位块reset复位smoothly顺利dent压痕scratch刮伤deformation变形filings铁削to draw holes抽孔inquiry, search for查寻to stock, storage, in stock库存receive领取approval examine and verify审核processing, to process加工delivery, to deliver 交货to return delivenry to. to send delinery back to retrn of goods退货registration登记registration card登记卡to control管制to put forward and hand in提报safe stock安全库存acceptance = receive验收to notice通知application form for purchase请购单consume, consumption消耗to fill in填写abrasion磨损reverse angle = chamfer倒角character die字模to collect, to gather收集failure, trouble故障statistics统计demand and supply需求career card履历卡to take apart a die卸下模具to load a die装上模具to tight a bolt拧紧螺栓to looser a bolt拧松螺栓to move away a die plate移走模板easily damaged parts易损件standard parts标准件breaking.(be)broken,(be)cracked 断裂to lubricate润滑common vocabulary for die engineering模具工程常用词汇die 模具figure file, chart file图档cutting die, blanking die冲裁模progressive die, follow (-on)die连续模compound die复合模punched hole冲孔panel board镶块to cutedges=side cut=side scrap切边to bending折弯to pull, to stretch拉伸Line streching, line pulling线拉伸engraving, to engrave刻印upsiding down edges翻边to stake铆合designing, to design设计design modification设计变化die block模块folded block折弯块sliding block滑块location pin定位销lifting pin顶料销die plate, front board模板padding block垫块stepping bar垫条upper die base上模座lower die base下模座upper supporting blank上承板upper padding plate blank上垫板spare dies模具备品spring 弹簧bolt螺栓document folder活页夹file folder资料夹to put file in order整理资料spare tools location手工备品仓first count初盘人first check初盘复棹人second count 复盘人second check复盘复核人equipment设备waste materials废料work in progress product在制品casing = containerazation装箱quantity of physical invetory second count 复盘点数量quantity of customs count会计师盘,点数量the first page第一联filed by accounting department for reference会计部存查end-user/using unit(department)使用单位summary of year-end physical inventory bills年终盘点截止单据汇总表bill name单据名称This sheet and physical inventory list will be sent to accounting department togeth er (Those of NHK will be sent to financial department)本表请与盘点清册一起送会计部-(NHK厂区送财会部)Application status records of year-end physical inventory List and physical inventory card 年终盘点卡与清册使用-状况明细表blank and waste sheet NO.空白与作废单号plate电镀mold成型material for engineering mold testing工程试模材料not included in physical inventory不列入盘点sample样品incoming material to be inspected进货待验description品名steel/rolled steel钢材material statistics sheet物料统计明细表meeting minutes会议记录meeting type 会别distribution department分发单位location地点difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/good parts良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条形码flow chart流程窗体assembly组装stamping冲压molding成型spare parts=buffer备品coordinate坐标dismantle the die折模auxiliary fuction辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除锈机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连杆edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕疪shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blinster气泡fillet镶;嵌边through-hole form通孔形式voller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴augular offset角度偏差velocity速度production tempo生产进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化alloy合金tungsten high speed steel钨高速的moly high speed steel钼高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机模具工程类plain die简易模pierce die冲孔模forming die成型模progressive die连续模gang dies复合模shearing die剪边模riveting die铆合模pierce冲孔forming成型(抽凸,冲凸)draw hole抽孔bending折弯trim切边emboss凸点dome凸圆semi-shearing半剪stamp mark冲记号deburr or coin压毛边punch riveting冲压铆合side stretch侧冲压平reel stretch卷圆压平groove压线blanking下料stamp letter冲字(料号)shearing剪断tick-mark nearside正面压印tick-mark farside反面压印冲压名称类extension dwg展开图procedure dwg工程图die structure dwg模具结构图material材质material thickness料片厚度factor系数upward向上downward向下press specification冲床规格die height range适用模高die height闭模高度burr毛边gap间隙weight重量total wt.总重量punch wt.上模重量五金零件类inner guiding post内导柱inner hexagon screw内六角螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等高套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw止付螺丝located pin定位销outer bush外导套模板类top plate上托板(顶板)top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板) stripping plate内外打(脱料板) outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert入块(嵌入件) deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch压筋冲子reel-stretch punch卷圆压平冲子guide plate定位板sliding block滑块chairman主席present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核准/审核/承办PCE assembly production schedule sheetPCE组装厂生产排配表model机钟work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门stock age analysis sheet库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明year-end physical inventory difference analysis sheet年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量模具基本术语时间:2005-8-23 10:15:45国际模具网各种模具常用成形方式accurate die casting 精密压铸 powder forming 粉末成形calendaring molding 压延成形 powder metal forging 粉末锻造cold chamber die casting 冷式压铸precision forging 精密锻造cold forging 冷锻 press forging 冲锻compacting molding 粉末压出成形 rocking die forging 摇动锻造compound molding 复合成形 rotary forging 回转锻造compression molding 压缩成形 rotational molding 离心成形dip mold 浸渍成形 rubber molding 橡胶成形encapsulation molding 注入成形 sand mold casting 砂模铸造extrusion molding 挤出成形shell casting 壳模铸造foam forming 发泡成形sinter forging 烧结锻造forging roll 轧锻six sides forging 六面锻造gravity casting 重力铸造 slush molding 凝塑成形hollow(blow) molding 中空(吹出)成形squeeze casting 高压铸造hot chamber die casting 热室压铸 swaging 挤锻hot forging 热锻transfer molding 转送成形injection molding 射出成形warm forging 温锻investment casting 精密铸造 matched die method 对模成形法laminating method 被覆淋膜成形 low pressure casting 低压铸造lost wax casting 脱蜡铸造matched mould thermal forming 对模热成形各式模具分类用语时间:2005-8-23 10:16:18国际模具网bismuth mold 铋铸模 landed plunger mold 有肩柱塞式模具burnishing die 挤光模 landed positive mold 有肩全压式模具button die 镶入式圆形凹模 loading shoe mold 料套式模具center-gated mold 中心浇口式模具 loose detail mold 活零件模具chill mold 冷硬用铸模loose mold 活动式模具clod hobbing 冷挤压制模 louvering die 百叶窗冲切模composite dies 复合模具manifold die 分歧管模具counter punch 反凸模modular mold 组合式模具double stack mold 双层模具 multi-cavity mold 多模穴模具electroformed mold 电铸成形模multi-gate mold 复式浇口模具expander die 扩径模 offswt bending die 双折冷弯模具extrusion die 挤出模 palletizing die 叠层模family mold 反套制品模具 plaster mold 石膏模blank through dies 漏件式落料模 porous mold 通气性模具duplicated cavity plate 复板模positive mold 全压式模具fantail die 扇尾形模具pressure die 压紧模fishtail die 鱼尾形模具 profile die 轮廓模flash mold 溢料式模具 progressive die 顺序模gypsum mold 石膏铸模protable mold 手提式模具hot-runner mold 热流道模具prototype mold 雏形试验模具ingot mold 钢锭模 punching die 落料模lancing die 切口模 raising(embossing) 压花起伏成形re-entrant mold 倒角式模具sectional die 拼合模runless injection mold 无流道冷料模具sectional die 对合模具segment mold 组合模semi-positive mold 半全压式模具shaper 定型模套single cavity mold 单腔模具solid forging die 整体锻模split forging die 拼合锻模split mold 双并式模具sprueless mold 无注道残料模具squeezing die 挤压模stretch form die 拉伸成形模sweeping mold 平刮铸模swing die 振动模具three plates mold 三片式模具trimming die 切边模unit mold 单元式模具universal mold 通用模具unscrewing mold 退扣式模具yoke type die 轭型模模具厂常用之标准零配件时间:2005-8-23 10:16:59国际模具网air vent vale 通气阀 anchor pin 锚梢angular pin 角梢baffle 调节阻板angular pin 倾斜梢 baffle plate 折流檔板ball button 球塞套 ball plunger 定位球塞ball slider 球塞滑块 binder plate 压板blank holder 防皱压板 blanking die 落料冲头bolster 上下模板bottom board 浇注底板bolster 垫板 bottom plate 下固定板bracket 扥架 bumper block 缓冲块buster 堵口 casting ladle 浇注包casting lug 铸耳cavity 模穴(模仁) cavity retainer plate 模穴扥板center pin 中心梢clamping block 锁定块coil spring 螺旋弹簧cold punched nut 冷冲螺母 cooling spiral 螺旋冷却栓core 心型 core pin 心型梢cotter 开口梢 cross 十字接头cushion pin 缓冲梢 diaphragm gate 盘形浇口die approach 模头料道die bed 型底die block 块形模体die body 铸模座die bush 合模衬套die button 冲模母模die clamper 夹模器die fastener 模具固定用零件die holder 母模固定板die lip 模唇die plate 冲模板 die set 冲压模座direct gate 直接浇口 dog chuck 爪牙夹头dowel 定位梢dowel hole 导套孔dowel pin 合模梢dozzle 辅助浇口dowel pin 定位梢draft 拔模锥度draw bead 张力调整杆drive bearing 传动轴承ejection pad 顶出衬垫 ejector 脱模器ejector guide pin 顶出导梢 ejector leader busher 顶出导梢衬套ejector pad 顶出垫 ejector pin 顶出梢ejector plate 顶出板 ejector rod 顶出杆ejector sleeve 顶出衬套ejector valve 顶出阀eye bolt 环首螺栓filling core 椿入蕊film gate 薄膜形浇口finger pin 指形梢finish machined plate 角形模板finish machined round plate 圆形模板fixed bolster plate 固定侧模板flanged pin 带凸缘销flash gate 毛边形浇口flask 上箱floating punch 浮动冲头gate 浇口gate land 浇口面 gib 凹形拉紧销goose neck 鹅颈管guide bushing 引导衬套guide pin 导梢 guide post 引导柱guide plate 导板guide rail 导轨head punch 顶镦冲头 headless punch 直柄冲头heavily tapered solid 整体模蕊盒hose nippler 管接头impact damper 缓冲器 injection ram 压射柱塞inlay busher 嵌入衬套 inner plunger 内柱塞inner punch 内冲头 insert 嵌件insert pin 嵌件梢king pin 转向梢king pin bush 主梢衬套knockout bar 脱模杵land 合模平坦面land area 合模面leader busher 导梢衬套lifting pin 起模顶销lining 内衬locating center punch 定位中心冲头locating pilot pin 定位导梢locating ring 定位环lock block 压块locking block 定位块locking plate 定位板loose bush 活动衬套making die 打印冲子 manifold block 歧管档块master plate 靠模样板 match plate 分型板mold base 塑料模座 mold clamp 铸模紧固夹mold platen 模用板moving bolster 换模保持装置moving bolster plate 可动侧模板one piece casting 整体铸件parallel block 平行垫块paring line 分模线parting lock set 合模定位器pass guide 穴型导板peened head punch 镶入式冲头pilot pin 导销pin gate 针尖浇口plate 衬板pre extrusion punch 顶挤冲头punch 冲头puncher 推杆 pusher pin 衬套梢rack 机架 rapping rod 起模杆re-entrant mold 凹入模 retainer pin 嵌件梢retainer plate 扥料板return pin 回位梢riding stripper 浮动脱模器ring gate 环型浇口roller 滚筒runner 流道runner ejector set 流道顶出器 runner lock pin 流道拉梢screw plug 头塞set screw 固定螺丝shedder 脱模装置 shim 分隔片shoe 模座之上下模板 shoot 流道shoulder bolt 肩部螺丝skeleton 骨架slag riser 冒渣口 slide(slide core) 滑块slip joint 滑配接头spacer block 间隔块spacer ring 间隔环spider 模蕊支架spindle 主轴 sprue 注道sprue bushing 注道衬套sprue bushing guide 注道导套sprue lock bushing 注道定位衬套sprue puller 注道拉料销spue line 合模线square key 方键square nut 方螺帽square thread 方螺纹stop collar 限位套stop pin 止动梢stop ring 止动环 stopper 定位停止梢straight pin 圆柱销 stripper bolt 脱料螺栓stripper bushing 脱模衬套 stripper plate 剥料板stroke end block 行程止梢submarine gate 潜入式浇口support pillar 支撑支柱/顶出支柱support pin 支撑梢supporting plate 扥板sweep templete 造模刮板tab gate 辅助浇口 taper key 推拔键taper pin 拔锥梢/锥形梢teeming 浇注three start screw 三条螺纹 thrust pin 推力销tie bar 拉杵tunnel gate 隧道形浇口vent 通气孔wortle plate 国际模具网模具常用之工作机械时间:2005-8-23 10:18:40国际模具网3D coordinate measurement 三次元量床boring machine 搪孔机cnc milling machine CNC铣床contouring machine 轮廓锯床copy grinding machine 仿形磨床 copy lathe 仿形车床copy milling machine 仿形铣床copy shaping machine 仿形刨床cylindrical grinding machine 外圆磨床die spotting machine 合模机drilling machine 钻孔机 engraving machine 雕刻机engraving E.D.M. 雕模放置加工机 form grinding machine 成形磨床graphite machine 石墨加工机horizontal boring machine 卧式搪孔机horizontal machine center卧式加工制造中心 internal cylindrical machine 内圆磨床jig boring machine 冶具搪孔机jig grinding machine 冶具磨床lap machine 研磨机machine center 加工制造中心multi model miller 靠磨铣床NC drilling machine NC钻床NC grinding machine NC磨床NC lathe NC车床NC programming system NC程序制作系统planer 龙门刨床profile grinding machine 投影磨床projection grinder 投影磨床radial drilling machine 旋臂钻床 shaper 牛头刨床surface grinder 平面磨床 try machine 试模机turret lathe 转塔车床universal tool grinding machine 万能工具磨床vertical machine center 立式加工制造中心国际模具网模具加工流程(一)时间:2005-8-23 10:37:05国际模具网模具加工流程开料:前模料、后模模料、镶件料、行位料、斜顶料;开框:前模模框、后模模框;开粗:前模模腔开粗、后模模腔开粗、分模线开粗;铜公:前模铜公、后模铜公、分模线清角铜公;线切割:镶件分模线、铜公、斜顶枕位;电脑锣:精锣分模线、精锣后模模芯;电火花:前模粗、铜公、公模线清角、后模骨位、枕位;钻孔、针孔、顶针;行位、行位压极;斜顶复顶针、配顶针;其它:①唧咀、码模坑、垃圾钉(限位钉);②飞模;③水口、撑头、弹簧、运水;省模、抛光、前模、后模骨位;细水结构、拉杆螺丝拉钩、弹簧淬火、行位表面氮化;修模刻字。

模切行业专用名词中英文对照

模切行业专用名词中英文对照

叼纸牙常用模切词汇模切----Die cutting刀具---tool平刀---Flatbed die圆刀---Rotary die精度---precision公差---tolerance圆刀模切---Rotary die cutting平刀模切---Flatbed die cutting激光模切---Laser die cutting刀座---station冲压---stamping印刷---printing喷漆---painting镀金属(法)---metallization数码装饰(法)---digital decoration碾压,层压---laminate分切---slit装配---Assembly嵌缝材料---Joint material保护膜---Protective Film粘结胶带---Bonding Adhesive Tape单面胶带---single-sided adhesive tape双面胶带---Double-coated Adhesive Tape防尘网---Dustproof Mesh泡棉---Foam金属箔膜---Metal foil film空间填补---Space Filling网孔冲压---Mesh Stamping按键板---Key Plate金属冲压件---Metal Punching Part塑胶薄膜类---Plastic Film低粘性保护膜---Low-adhesive protective film 静电---static厚度---thickness密度---density定制---customize基材---carrier硬度---rigidity透明色---transparent colorGlassine liner-----格钠辛底纸paper liner----纸离型膜Ployester liner-----PET离型膜Vacume die--真空刀Strip bar---剥刀Nip roller--胶辊Relaese tab---小耳朵Die cut----模切Flatbed die---平刀Rotary Die---圆刀Kiss cutting--半切Through cutting--全切ID slug---内框废料Waste matrix---外框废料Thermal bonding film-----热溶胶Polyester film----PET 膜Release liner---离型模Fine-tuning----微调Bi-level die----双层刀Stee rule die----平板刀Etch Die----蚀刻刀Male/femal die----公母模Engraving die----雕刻模Seek Pin---套位针Tension---张力Torque---扭力Slitting----分切Rewind----收料Unwind----放料。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

叼纸牙
常用模切词汇
模切----Die cutting
刀具---tool
平刀---Flatbed die
圆刀---Rotary die
精度---precision
公差---tolerance
圆刀模切---Rotary die cutting
平刀模切---Flatbed die cutting
激光模切---Laser die cutting
刀座---station
冲压---stamping
印刷---printing
喷漆---painting
镀金属(法)---metallization
数码装饰(法)---digital decoration
碾压,层压---laminate
分切---slit
装配---Assembly
嵌缝材料---Joint material
保护膜---Protective Film
粘结胶带---Bonding Adhesive Tape
单面胶带---single-sided adhesive tape
双面胶带---Double-coated Adhesive Tape
防尘网---Dustproof Mesh
泡棉---Foam
金属箔膜---Metal foil film
空间填补---Space Filling
网孔冲压---Mesh Stamping
按键板---Key Plate
金属冲压件---Metal Punching Part
塑胶薄膜类---Plastic Film
低粘性保护膜---Low-adhesive protective film 静电---static
厚度---thickness
密度---density
定制---customize
基材---carrier
硬度---rigidity
透明色---transparent color
Glassine liner-----格钠辛底纸
paper liner----纸离型膜Ployester liner-----PET离型膜Vacume die--真空刀
Strip bar---剥刀
Nip roller--胶辊
Relaese tab---小耳朵
Die cut----模切
Flatbed die---平刀
Rotary Die---圆刀
Kiss cutting--半切
Through cutting--全切
ID slug---内框废料
Waste matrix---外框废料
Thermal bonding film-----热溶胶Polyester film----PET 膜Release liner---离型模
Fine-tuning----微调
Bi-level die----双层刀
Stee rule die----平板刀
Etch Die----蚀刻刀
Male/femal die----公母模Engraving die----雕刻模
Seek Pin---套位针
Tension---张力
Torque---扭力
Slitting----分切
Rewind----收料
Unwind----放料。

相关文档
最新文档