Omega3313机芯详细资料
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
3313
system with column-wheel. 30-min. minute counter and 12-h hour counter + small second hand at 9
o’clock. Omega balance system without index.
Contents
Page Calibre 3313
1Exploded views for Calibre 3313 9-13
Dial side 9Spare parts list & illustrations for Calibre 3313 14-18
Spare parts & illustrations 14Speci fi c information for Calibre 3313 19-23
Chronograph wheel function / Description of chronograph system 19Movement side 10Movement side 11Movement side 12Dial side 13
Escapement and Balance bridge installation 20Chronograph setting 21Runners for hand setting and hand setting force / Epilame coating 22Spare parts & illustrations 15Spare parts & illustrations 16Spare parts & illustrations 17Differences between the versions for Calibre 3313
8
Differences between the versions
8
Spare parts & illustrations 18
General information for Calibre 3313
3-7
Exchange / Key points / Lubricants / Mandatory tools 3 Tightening and untightening torques according to screw thread size 3Technical modi fi cations on version «A» and «B» 4-5 Lubrication of crow wheel and the three driving wheels for ratchet wheel 6-7
Instantaneous rate 23
Modi fi cations of Technical Guide versions for Calibre 3303 24
Balance bridge and chronograph bridge
The bridges with serial numbers are not available (see CS-Info Calibre No 33). For exchange, see table:
Key points
The three intermediate driving wheels for ratchet wheel
(32.083) must be correctly lubricated with Moebius SYNT-HP-1300 Sans Colorant. Insuf fi cient lubrication could lead to the formation of burrs or chips and hinder the correct winding of the barrel. Cleaning would not be suf fi cient to remove all this.(see page 6 and 7).
Due to the movement construction, there are various screw lengths. To avoid problems at assembly, group identical screws together for cleaning.Co-axial Escapement lubrication See Working Instruction No 40.
Tightening and untightening torques according to screw
To fi t the hands, the movement must be placed in a suitable, well-adjusted movement holder.Hand fi tting
Reference
Movement holder for hand fitting 507 0001Hand fi tting tool kit 507 0011Movement Reference Mainspring winder 502 150 0009Timing key 502 200 0501Movement holder
506 0001Tool for checking the escapement functions 506 0004Lubricants Reference Moebius SYNT-A-LUBE 9010 (2ml) 504 200 0001Moebius SYNT HP-1300 Sans Colorant 504 5013 Moebius 9504 504 5014Moebius SYNT HP-500 504 5012
Kluber P125
504 100 0071