威创(VIATRAN)压力传感器技术参数
Sensata Technologies 压力传感器产品简介说明书
Temperature FunctionWORLD CLASSPERFORMANCESensata Technologiesoffers a wide range ofsensing solutions forpressure applications ofevery kind. By focusingour unparalleledengineering and manu-facturing expertise onyour needs, we willmeet the highestexpectations of all -your own.Sensata Technologiesis the world’s leadingsupplier of sensors andcontrols across a broadrange of markets andapplications.WORLD CLASS PERFORMANCE The CP Series’ pressure transducers with their proven ceramiccapacitive technology have been on the market for many years.Our large portfolio with a variety of mechanical and electrical connec-tions creates a broad range of combination possibilities.50.5 (2)73.8 max (2.9)57.9 max (2.3)35.6 max (1.8)ø 24.3 (0.96)8.2 (0.3)3.6 (0.14)40.2 (1.6)30.4 (1.2)Sensata Technologies is the world’s leading supplier of sensors and controls across a broad range of markets and applications.WORLD CLASS 65.0 (2.56)45.6 (1.8)23.9 (0.94)Pressure outputGroundSupply voltageThermistor outputFeatures and benefits• Hermetic pressure sensors with multiple Input/Output options • High accuracy and repeatability • Multiple standard and custom ports • Outstanding EMC performance and high dielectric strengthTypical applications• Air conditioning• Alternative energy management • Compressors and pumps • Hydraulics and pneumatics• Processing control and automation • Vending machinesWORLD CLASS PERFORMANCE The CH Series’ pressure transducers are ideally suited for the most demanding industrial applications. This innovative product is hermetic but not oil-filled and boasts case isolation up to 1800 V.Ground57.2 (2.25)Aø 31.8 (1.25)Power terminalAOuput terminalø 27.4 (1.08)Sensata Technologies is the world’s leading supplier of sensors and controls across a broad range of markets and applications.Technical specificationsWORLD CLASS PERFORMANCE The PP Series’ pressure transducers allow for the best control in an industrial system. A piezo-resistive technology has been selected, whereby the strain gauges are glass fused onto a metal membrane and hermetically sealed.Small Form Factor 30.1 (1.19)ø 13 (0.51)31.7 (1.25)30 m a x (1.18)40 max (1.58)28 (1.10) 26.8 max (1.06)ø 6 (0.24)Sensata Technologies is the world’s leading supplier of sensors and controls across a broad range of markets and applications.WORLD CLASS PERFORMANCE The most accurate technologies for a true Differential Pressure Sensor are Micro-Electro-Mechanical-Systems (MEMS). Our patented MEMSproducts offer the best-value solutions for differential pressure applications.23 (0.9)ø 6 (0.24)23 (0.9)ø 8 (0.32)20 (0.8)71 (2.8)12.6 (0.5)Supply Voltage GroundOutput signal6 (0.24)Sensata Technologies is the world’s leading supplier of sensors and controls across a broad range of markets and applications.Seal material compatibility guideSeal material Media compatibility (please contact Sensata for more information)Maximum seal temperature range*petroleum oils, lubricants, detergent solutionssteam soaps, polar solvents, brake fluid, acetone Skydrol TM chlorinated solvents, oils, fuels, air Pressure connections(please contact Sensata for other connections)27.6 (1.09)Packard Metri-PackAMP MQS - 3 pins 1/4” - 18 NPTF male1/8” - 27 NPTF male1/4” SAE female flare with deflator (7/6” - 20 UNF - 2B)ø 17 (0.67)Electrical connections(please contact Sensata for other connections)16.4 (0.65)23.5 (0.95)34.4 (1.35)DIN 7258519.6 (0.77)ø 23.6 (0.93)12.9 (0.51)26.4 (1.04)34.1 (1.34)3/8” - 24 UNF male1/4” - 19 BSPT male25.1 (0.99)20 (0.79)10.9 (0.43)7 (0.28)14.5 (0.57)24.3 (0.96)9.8 (0.39)14.5 (0.57)8.9 (0.35)VDA13.8 (0.54)27.1 (1.07)7/16” - 20 UNF maleHex 17.5 (0.69)14.6 (0.58)Hex 17.5 (0.69)11.4 (0.45)Hex 15.7 (0.62)9.5 (0.38)M12 x 1 maleM12 x 1.5 maleM14 x 1.5 male13.7 (0.54)16.2 (1.48)11.3 (0.45)10.3 (0.41)9.8 (0.39)M10 x 1.25 female M18 x 1.5 male 10 (0.39)Hex 14 (0.55)12.7 (0.5)14 (0.55)12 (0.47)12 (0.47)6.9 (0.27)13.2 (0.84)12 (0.47)15.5 (0.6)18 (0.71)19.3 (0.76)19.9 (0.78)14.3 (0.56)11.1 (0.44)17.5 (0.69)6.4 (0.25)Hex 15.9 (0.63)12.7 (0.5)9.2 (0.36)Note: Dimensions are shown in mm (inches)Note: Dimensions are shown in mm (inches)10.6 (0.42)12.7 (0.5)15.3 (0.6)10.3 (0.41)Yazaki10.4 (0.41)21.8 (0.96)RD22.3 (0.88)70.1 (2.76)Sensata Technologies Holland B.V. Kolthofsingel 87602 EM ALMELOThe NetherlandsPhone: +31 546 879555Fax:+31 546 870535 Important Notice: Sensata Technologies (Sensata) reserves the right to make changes to or discontinue any product or service identified in this publication without notice. Sensata advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current. Sensata assumes no responsibility for infringement of assistance or product specifications since Sensata does not possess full access concerning the use or application of customers' products. Sensata also assumes no responsibil-ity for customers' product design.。
微型压力传感器的参数
微型压力传感器的参数微型压力传感器是一种广泛应用于工业、航空、汽车、医疗、生活等领域的高性能、高精度的压力测量设备。
在应用中，合理选择和掌握传感器的参数是非常重要的，下面我们将介绍微型压力传感器的主要参数。
1.测量范围测量范围是指传感器可测量的压力范围，一般用最小测量值和最大测量值来表示。
微型压力传感器的测量范围有限制，通常其可以承受的最大压力为3至5倍的额定测量压力。
2.精度精度是指传感器输出值与被测压力的实际值之间的偏差，它是微型压力传感器重要的参数。
传感器的精度一般用百分比表示，它与该传感器的测量范围有关。
在实际应用中，选择合适的精度可以有效地提高测量结果的准确度。
3.温度影响温度对微型压力传感器的测量结果具有较大的影响，因此温度稳定性是非常重要的参数。
温度影响是指在不同的温度下传感器的精度是否有变化，一般用百分比表示。
通常，传感器的精度将随着温度变化而变化，因此在选购之前应注意传感器的温度特性。
4.响应时间响应时间是指传感器在受到外界压力作用后，输出信号达到稳定状态所需要的时间。
响应时间通常受到传感器结构和体积的制约。
一般情况下，响应时间越短，传感器的性能越好。
5.零漂零漂是指传感器在无外界压力作用时输出的信号是否为零。
在实际应用中，传感器输出的信号可能会因为机械、设备或传感器本身的原因而受到外界干扰。
因此，应选择零漂小的传感器，以确保测量结果的准确性。
6.重复性重复性是指传感器在相同压力下测量多次所得结果间的一致性。
在实际应用中，由于传感器受到多种因素的影响，可能会导致测量结果间出现波动。
因此，在选购时应注意传感器的重复性。
综上所述，微型压力传感器的参数包括测量范围、精度、温度影响、响应时间、零漂和重复性，这些参数对于传感器的效果及应用效果都具有非常重要的影响。
在实际应用中，应根据具体的实际情况，选择合适的传感器并合理应用。
压力传感器产品说明书
No.PS※※-OME0004-GPressure SensorPSE53#Safety Instructions 2 Model Identification and how to order 8 Definition and terminology 8 Mounting and Installation 9 Wiring 9 Troubleshooting 11 Specification 12 Specifications 12 Dimensions 14Safety InstructionsThese safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of "Caution", "Warning" or "Danger".They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)*1), and other safety regulations.*1) ISO 4414: Pneumatic fluid power -- General rules relating to systems.ISO 4413: Hydraulic fluid power -- General rules relating to systems.IEC 60204-1: Safety of machinery -- Electrical equipment of machines. (Part 1: General requirements)ISO 10218: Manipulating industrial robots -Safety.etc.Caution Caution indicates a hazard with a low level of risk which, if not avoided, couldresult in minor or moderate injury.Warning Warning indicates a hazard with a medium level of risk which, if not avoided,could result in death or serious injury.Danger Danger indicates a hazard with a high level of risk which, if not avoided, willresult in death or serious injury.Warning1. The compatibility of the product is the responsibility of the person who designs theequipment or decides its specifications.Since the product specified here is used under various operating conditions, its compatibility withspecific equipment must be decided by the person who designs the equipment or decides itsspecifications based on necessary analysis and test results.The expected performance and safety assurance of the equipment will be the responsibility of the person who has determined its compatibility with the product.This person should also continuously review all specifications of the product referring to its latestcatalog information, with a view to giving due consideration to any possibility of equipment failure when configuring the equipment.2. Only personnel with appropriate training should operate machinery and equipment.The product specified here may become unsafe if handled incorrectly.The assembly, operation and maintenance of machines or equipment including our products must be performed by an operator who is appropriately trained and experienced.3. Do not service or attempt to remove product and machinery/equipment until safety isconfirmed.1. The inspection and maintenance of machinery/equipment should only be performed after measuresto prevent falling or runaway of the driven objects have been confirmed.2. When the product is to be removed, confirm that the safety measures as mentioned above areimplemented and the power from any appropriate source is cut, and read and understand the specific product precautions of all relevant products carefully.3. Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.4. Contact SMC beforehand and take special consideration of safety measures if theproduct is to be used in any of the following conditions.1. Conditions and environments outside of the given specifications, or use outdoors or in a placeexposed to direct sunlight.2. Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping,vehicles, military, medical treatment, combustion and recreation, or equipment in contact with food and beverages, emergency stop circuits, clutch and brake circuits in press applications, safety equipment or other applications unsuitable for the standard specifications described in the product catalog.3. An application which could have negative effects on people, property, or animals requiring specialsafety analysis.4. Use in an interlock circuit, which requires the provision of double interlock for possible failure byusing a mechanical protective function, and periodical checks to confirm proper operation.Safety InstructionsCaution1.The product is provided for use in manufacturing industries.The product herein described is basically provided for peaceful use in manufacturing industries.If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary.If anything is unclear, contact your nearest sales branch.Limited warranty and Disclaimer/Compliance Requirements The product used is subject to the following "Limited warranty and Disclaimer" and "Compliance Requirements".Read and accept them before using the product.Limited warranty and Disclaimer1. The warranty period of the product is 1 year in service or 1.5 years after the product isdelivered, whichever is first.*2)Also, the product may have specified durability, running distance or replacement parts.Please consult your nearest sales branch.2. For any failure or damage reported within the warranty period which is clearly ourresponsibility, a replacement product or necessary parts will be provided.This limited warranty applies only to our product independently, and not to any other damage incurred due to the failure of the product.3. Prior to using SMC products, please read and understand the warranty terms anddisclaimers noted in the specified catalog for the particular products.*2) Vacuum pads are excluded from this 1 year warranty.A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.Also, even within the warranty period, the wear of a product due to the use of thevacuum pad or failure due to the deterioration of rubber material are not covered bythe limited warranty.Compliance Requirements1. The use of SMC products with production equipment for the manufacture of weapons ofmass destruction (WMD) or any other weapon is strictly prohibited.2. The exports of SMC products or technology from one country to another are governed bythe relevant security laws and regulation of the countries involved in the transaction. Prior to the shipment of a SMC product to another country, assure that all local rules governing that export are known and followed.CautionSMC products are not intended for use as instruments for legal metrology.Products that SMC manufactures or sells are not measurement instruments that are qualified by pattern approval tests relating to the measurement laws of each country.Therefore, SMC products cannot be used for business or certification ordained by the measurement laws of each country.■NOTE○Follow the instructions given below when designing, selecting and handling the product.●The instructions on design and selection (installation, wiring, environment, adjustment,operation, maintenance, etc.) described below must also be followed.*Product specifications∙Use the specified voltage.Otherwise failure or malfunction can result.∙For the details of compressed air quality, refer to ISO 8573-1, 1.1.2 to 1.6.2: 2001.This can cause operating failure.If compressed air containing condensate is used, install an air dryer or drain catch before the filter and perform drainage regularly.If drainage is not performed regularly and condensate enters the secondary side, it can cause operating failure of pneumatic equipment.If regular drainage is difficult, the use of a filter with an auto drain is recommended.∙Applicable fluid is air, inert gases and incombustible gases.Do not use a fluid containing chemicals, synthetic oils including organic solvent, salt and corrosive gases.Otherwise, damage to the product and malfunction can result.Check the details of the specifications before using.∙Use the specified measurement flow rate and operating pressure.Otherwise it can cause damage to the Pressure Sensor or inability to measure correctly.∙Reserve a space for maintenance.Allow sufficient space for maintenance when designing the system.●Product handling*Installation∙Tighten to the specified tightening torque.If the tightening torque is exceeded the mounting screws and brackets may be broken.If the tightening torque is insufficient, the product can be displaced and loosen the mounting screws.∙Be sure to ground terminal FG when using a commercially available switch-mode power supply.∙Do not drop, hit or apply shock to the Pressure Sensor.Otherwise damage to the internal parts can result, causing malfunction.∙Do not pull the lead wire forcefully, not lift the product by pulling the lead wire. (Tensile force 23N or less) Hold the body when handling to avoid the damage of the Pressure Sensor lead to cause the failure andmalfunction.∙For piping of the Pressure Sensor, hold the piping with a spanner on the metal part of the piping (Piping attachment).Holding other part with spanner leads to damage the Pressure Sensor.∙Eliminate any dust left in the piping by air blow before connecting the piping to the product.Otherwise it can cause damage or malfunction.∙Do not insert metal wires or other foreign matter into the pressure measurement port.It can damage the Pressure Sensor causing failure or malfunction.∙If the entering of foreign material to the fluid is possible, install and pipe the filter or the mist separator to the inlet to avoid failure and malfunction.*Wiring∙Do not pull the lead wires.In particular, never lift a Pressure Sensor equipped with fitting and piping by holding the lead wires.∙Avoid repeatedly bending or stretching the lead wire, or placing heavy load on them.Repetitive bending stress or tensile stress can cause the sheath of the wire to peel off, or breakage of the wire.If the lead wire can move, fix it near the body of the product.The recommended bend radius of the lead wire is 6 times the outside diameter of the sheath, or 33 times theoutside diameter of the insulation material, whichever is larger.Replace the damaged lead wire with a new one.∙Wire correctly.Incorrect wiring can break the Pressure Sensor.∙Do not perform wiring while the power is on.Otherwise damage to the internal parts can result, causing malfunction.∙Do not route wires and cables together with power or high voltage cables.Otherwise the product can malfunction due to interference of noise and surge voltage from power and high voltage cables to the signal line. Route the wires (piping) of the product separately from power or high voltage cables.∙Confirm proper insulation of wiring.Poor insulation (interference from another circuit, poor insulation between terminals, etc.) can lead to excessvoltage or current being applied to the product, causing damage.∙Keep wiring as short as possible to prevent interference from electromagnetic noise and surge voltage.Do not use a cable longer than 30 m.Wire the DC(-) line(blue) as close as possible to the power supply.∙When analog output is used, install a noise filter (line noise filter, ferrite element, etc.) between theswitch-mode power supply and this product.*Environment∙Do not use the product in area that is exposed to corrosive gases, chemicals, sea water, water or steam.Otherwise failure or malfunction can result.∙Do not use in a place where the product could be splashed by oil or chemicals.If the product is to be used in an environment containing oils or chemicals such as coolant or cleaning solvent, even for a short time, it may be adversely affected (damage, malfunction, or hardening of the lead wires).∙Do not use in an area where surges are generated.If there is equipment which generates a large amount of surge (solenoid type lifter, high frequency induction furnace, motor, etc.) close to the Pressure Sensor, this may cause deterioration or breakage of the internal circuit of the Pressure Sensor. Avoid sources of surge generation and crossed lines.∙The product is CE marked, but not immune to lightning strikes. Take measures against lightning strikes in the system.∙Mount the product in a place that is not exposed to vibration or impact.Otherwise failure or malfunction can result.∙Prevent foreign matter such as remnant of wires from entering the Pressure Sensor.Take proper measures for the remnant not to enter the Pressure Sensor in order to prevent failure or malfunction. ∙Do not use the product in an environment that is exposed to temperature cycle.Heat cycles other than ordinary changes in temperature can adversely affect the inside of the product.∙Do not expose the product to direct sunlight.If using in a location directly exposed to sunlight, shade the product from the sunlight.Otherwise failure or malfunction can result.∙Keep within the specified fluid and ambient temperatures range.The fluid and ambient temperatures should be 0 to 50 °C. Operation under low temperature leads to cause damage or operation failure due to frozen moist in the fluid or air.Protection against freezing is necessary. Air dryer is recommended for elimination of drain and water.Avoid sudden temperature change even within specified temperature.∙Do not operate close to a heat source, or in a location exposed to radiant heat.Otherwise malfunction can result.*Adjustment and Operation∙Do not short-circuit the load.∙If using the product to detect very small pressure rates, warm up the product for 20 to 30 minutes first.There will be a drift on the analog output of approximate ±1% immediately after the power supply is turned on, within 10 minutes.*Maintenance∙Turn off the power supply, stop the supplied air, exhaust the residual pressure and verify the release of air before performing maintenance.There is a risk of unexpected malfunction.∙Perform regular maintenance and inspections.There is a risk of unexpected malfunction.∙Perform drainage regularly.If condensate enters the secondary side, it can cause operating failure of pneumatic equipment.∙Do not use solvents such as benzene, thinner etc. to clean the Pressure Sensor.They could damage the surface of the body and erase the markings on the body.Use a soft cloth to remove stains. For heavy stains, use a cloth soaked with diluted neutral detergent and fully squeezed, then wipe up the stains again with a dry cloth.■Wiring○Attaching the connector to the lead wire∙Sensor wire is stripped as shown in the right figure. ∙Do not cut the insulation.∙The core of the corresponding color shown in thefollowing table is put into the pin of the number stamped∙It checks that the above-mentioned preparation work has been performed correctly, and A part shown in right figure is pushed by hand and makes temporary connection. ∙A part center is straightly pushed in by tools, such as pliers.∙Re-use cannot be performed once it connects the connector for sensor connection completely. When you fail in the connection mistake of a core and a pin, or the plug of wire, please use the new connector for sensor connection.catalogue.○How to connect the cable for sensor (Option)∙Pick with fingers the connector of cable sensor. Insert it paying attention of connector direction.∙Cable for sensor have connector cover in order to prevent fall of connector.∙Paying attention for connector cover direction, install on the sensor, rotate clockwise, and lock it. ∙To remove cable for sensor, rotate the connector cover anti-clockwise, release lock, and removeconnector cover. After removing connector, pick with connector with fingers and pull out.○Connector and applicable pressure sensorConnecting/Disconnecting∙When connecting the connector, insert it straight onto the pin holding the lever and connector body between fingers and lock the connector by pushing the lever claw into the square groove in the housing until connector clicks.∙When disconnecting the connector, push down the lever by thumb to disengage the lever claw from the square groove. Then pull the connector straight out.PSE200 series PSE300 series○Internal circuit and wiring example∙Output specificationVoltage output: 1 to 5 VOutput impedance: Approx. 1 kΩ○Cross-reference for troubleshooting○Analog outputRange Rated pressure range A B C For vacuum 0 to -101 kPa 0 -101 kPa 10.1 kPaFor compound -101 to 101 kPa -101 kPa 101 kPa -For low pressure 0 to 101 kPa 0 101 kPa -10.1 kPaFor positive pressure -0 to 1 MPa 0 1 MPa -0.1 MPa■Dimensions∙PSE53□-M5∙PSE53□-R06R07Model No. Applicable fitting size (D)PSE53□-R06 6 mm PSE53□-R071/4 inch∙With sensor cable4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021 JAPANTel: + 81 3 5207 8249 Fax: +81 3 5298 5362URL Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.。
VIATRAN压力传感器
VIATRAN压力传感器VIATRAN压力传感器3475BFGBYDWLR （小★李：1*5*8 05*06 12*13）Viatran压力传感器2186BC2AF510viatran(威创)压力传感器5705BPSX1052威创传感器\5093BPS/349123威创1）520 PBS2）5093BPS威创5093BPS威创520BQS FIG2002威创510BPS威创5093BPSZQ威创5705BMSNZ 3个5705BQSNZ威创5705BMSNZ石油和天然气压力传感器Viatran是压力变送器的二次油气回收行业（如压裂，酸化，固井）的设计和制造的世界领先者。
其他应用包括控制液压钻机压力井下钻机安全，流线的压力，添加剂计量泵，海底喷射阀和清理出局。
测试与控制压力传感器生产前的压力测试测量的重要产品参数是在汽车，越野设备和飞机行业的重中之重。
在这样困难和坚固的压铸拍摄监控，汽车冲压，轧钢厂和采矿设备的生产和操作应用控制液压特定仪器的几个竞争对手的实力相匹配。
潜水式压力传感器液位的测量是在今天的市，过程及工业市场的最重要的应用之一。
使用潜水压力传感器来测量液位具有最低的拥有成本，并能提供最可靠的方法，如果正确安装。
Viatran提供一个更准确，可靠的潜水压力/液位传感器与低至2ftH2O在各种耐化学腐蚀的材料范围。
卫生型压力传感器在食品，乳品，饮料和医药行业的压力和液位测量需要非常专业的，高度精确的发射机。
卫生处理市场需要发射器，可以承受到位清洁（CIP）或消毒（SIP）的严酷到位，提供温度恢复快，数字输出和具体的接液部件。
应用包括平衡罐，料仓，缓冲罐，配料或混合过程，味道系统，巴氏杀菌，乳化机，灌装机，肉类加工和同质化。
过程压力传感器特定应用的传感器提供高可靠，公用事业/废水，汽车喷漆车间，船上的海洋和化学聚合物行业的过程和液位变送器。
应用包括控制反渗透高纯水系统，高压低密度聚乙烯反应器的控制，过程控制压缩机和泵，汽车厂油漆系统，淋洗液床化学废物行业水平的压力。
Endevco Model 8530C 膜压力传感器说明书
Piezoresistive pressure transducer Model 8530C -15, -50, -100Key features Model 8530C is a miniature, high sensitivity piezoresistive pressure transducer for measuring absolute pressure. The volumebehind the diaphragm is evacuated and glass sealed to provide an absolute pressure reference. Full scale output is 225 mV withhigh overload capability and high frequency response. It is available in ranges from 15 psia to 100 psia. 8530B is available forhigher pressure ranges.Endevco pressure transducers feature a four-arm strain gage bridge ion implanted into a unique sculptured silicon diaphragmfor maximum sensitivity and wideband frequency response. Self-contained hybrid temperature compensation provides stableperformance over the temperature range of 0°F to 200°F (-18°C to +93°C). Endevco transducers also feature excellent linearity(even to 3X range), high shock resistance, and high stability during temperature transients.8530C has been used successfully in many blast test situations. For this application, a protective coating is recommended toeliminate photoflash sensitivity and provide particle impingement protection. This coating does not degrade the superior dynamicresponse characteristics of the sensor.8530C is available with metric M5 mounting thread as 8530C-XXM5 on special order. See “other options.”Recommended electronics for signal conditioning and power supply are model 126 and 136 general purpose three channel conditioners, ultra low noise4430A conditioner, or the 4990A-X (Oasis) multi-channel rack mount system.• 15, 50 and 100 psia ranges• 225 mV full scale• Absolute referencePiezoresistive pressure transducerModel 8530C -15, -50, -100SpecificationsThe following performance specifications conform to ISA-RP-37.2 (1964) and are typical values, referenced at +75˚F (+24˚C) and 100 Hz, unless otherwise noted. Calibration data, traceable to National Institute of Standards and Technology (NIST), is supplied.Dynamic characteristics Units -15 -50 -100Range [1] psia 0–15 0–50 0–100Sensitivity [1] mV/psi typ (min) 15.0 (9.3) 4.5 (2.8) 2.25 (1.4)Combined: non-linearity,non repeatability, pressure hysteresis [2] % FSO RSS max 0.50 0.40 0.40Non-linearity, independent % FSO typ 0.15 0.1 0.1Non-repeatability % FSO typ 0.1 0.1 0.1Pressure hysteresis % FSO typ 0.1 0.1 0.1Zero measurand output [3] mV max ±20 ±20 ±20Zero shift after 3X range ±% 3X FSO max 0.2 0.2 0.2Thermal zero shiftFrom 0 to 200˚F (-18˚C to +93˚C) ±% FSO max 3 3 3Thermal sensitivity shiftFrom 0 to 200˚F (-18˚C to +93˚C) ±% max 3 3 3Resonance frequency Hz 180 000 320 000 500 000Non-linearity at 3X range % 3X FSO 1.0 1.0 1.0Zero shift with mounting torque15 lbf-in. (1.7 Nm) % FSO 0.2 0.5 0.5Thermal transient response per psi / ˚F 0.003 0.003 0.010ISA-S37.10, PARA. 6.7, procedure I [4] psi / ˚C 0.005 0.005 0.018Photoflash response [5] equiv psi 0.1 0.3 0.6Warm-up time [6] ms 1 1 1Acceleration sensitivity equiv. psi/g 0.00015 0.00015 0.00015Burst pressure (diaphragm) psia min 75 250 400Case pressure [7] psia min 1000 1000 1000ElectricalFull scale output 225 mV typical (140 mV minimum) at 10.0 VdcSupply voltage [8] 10.0 Vdc recommended, 15 Vdc maximumElectrical configuration Active four-arm piezoresistive bridgePolarity Positive output for increasing pressureResistanceInput 2600 ohms typical, 1700 ohm minimumOutput 1500 ohms typical, 2200 ohms maximumIsolation 100 megohms minimum at 50 Volts, leads to case, leads to shield, shield to caseNoise 5 microvolts rms typical, DC to 50 000 Hz; 50 microvolts rms maximum, DC to 50 000 HzMechanicalCase, material Stainless steel (17-4 PH CRES)Cable, integral Four conductor No. 32 AWG Teflon insulated leads, braided shield, silicone jacket, 30 ±6 in (760 ±150 mm) Dead volume port (+) 0.0003 cubic inches (0.005 cc)Mounting/torque 10-32 UNF-2A threaded case 0.438 inch (11.12 mm) long / 15 ±5 lbf-in (1.7 ±0.6 Nm)Weight 2.3 grams (cable weighs 9 grams/meter)EnvironmentalMedia [9] Internal seals are epoxy compatible with clean dry gas media. Media is exposed to CRES, ceramic,silicon, Parylene C, epoxy, silicone rubber, and the O-Ring. For use in water or corrosive media, contactthe factory for modifications and installation precautions which may be taken to extend service life Temperature [10] -65˚F to +250˚F (-54˚C to +121˚C)Vibration 1000 g pkAcceleration 1000 gShock 20 000 g, 100 microsecond haversine pulseHumidity Isolation resistance greater than 100 megohms at 50 V when tested per MIL-STD-202E, method 103B, test condition Calibration dataData supplied for all parameters in Certified Performance section. Optional calibrations available for all parameters in Typical Performance sectionPiezoresistive pressure transducer Model 8530C -15, -50, -100ContactENDEVCO T el: +1 (866) ENDEVCO [+1 (866) 363-3826]AccessoriesNotes1. 1 psi = 6.895 kPa = 0.069 bar .2. FSO (Full Scale Output) is defined as transducer output change from 0 psia to + full scale pressure.3. Zero Measurand Output (ZMO) is the transducer output with 0 psia applied.4.Significantly higher thermal transient errors occur if the excitation voltage exceeds 10 Vdc. For sensitive phase change studies, many users reduce the excitation to 5 Vdc or even 1 Vdc.5. Per ISA-S37.10, Para.6.7, Proc. II. The metal screen partially shields the silicon diaphragm from incidentradiation. Accordingly, light incident at acute angles to the screen generally increases the error by a factor of 2 or 3.6. Warm-up time is defined as elapsed time from excitation voltage “turn on” until the transducer output is within ±1% of reading accuracy.7. Case pressure identifies media containment pressure in the event of diaphragm rupture.8. For best results when using excitation voltages other than 10.0 Vdc, it is recommended that the transducer be calibrated at the desired excitation during manufacture. Otherwise larger thermal errors may occur, especially at voltages above 10 Vdc.9. O-ring, EHR93 Parker 5-125, compound V747-75 (Viton ®) is supplied unless otherwise specified on purchase order . Fluorosilicone O-ring, EHR96 Parker material L677-70, for leak tight operation below 0°F is available on special order .10. Maintain high levels of precision and accuracy using Endevco’s factory calibration services. Call Endevco’s inside sales force at 866-ENDEVCO for recommended intervals, pricing and turn-around time for these services as well as for quotations on our standard products.11. NOTE: Tighter specifications are available on special order .Model definitionOther optionsM1 “A” screen, black grease - ITAR M2 “B” screen, black grease - ITAR M5 Metric threadM37 Integral connector M58 “B” screen M57 No screen, gel M59 No screen8530C - XXX - YYY - EExcitation voltage (if no voltage is specified the default is 10 Vdc)A=2 Vdc, B=2.5 Vdc, C=3.3 Vdc, D=5 Vdc, E=7, F=7.5Cable length in inches (ie 8530C-100-200 has a length of 200 inches) If no dash number is specified the default is 30 inches. For lengths ≤ 10 ft specify 1 ft increments (12”, 24”...120”)For lengths ≤ 10 ft specify 5 ft increments (180”, 240”...etc)Pressure range (psia)-15, -50, -100Basic model number。
威创(VIATRAN)压力传感器技术参数
Viatran’s years of oil field experience helps us solve typical application problems. The X09 was created as a solution to the application that a customer couldn’t solve. Once solved, we modified the unit to accomplish even more in oil extraction.
Full Scale Output (FSO)
Zero Balance
Non-Linearity (Best Fit Straight Line)............≤0.25% FS Hysteresis & Repeatability...........................≤±0.10% FSO 509...........................................................16 mA ±1% 709...........................................................5 Vdc ±1% 809...........................................................30 mVC ±1% at 10 V excitation 509...........................................................4 mA ±1% FSO 709...........................................................0 Vdc ±1% FSO 809...........................................................0 mV ±1% FSO Long-Term Stability....................................≤±0.5% FSO per 6 months Response Time...........................................≤2.5 mSec to reach 90% of FSO Temperature Effect on Zero.........................≤±1% FSO per 100°F (37°C) Temperature Effect on Span........................≤±1% FSO per 100°F (37°C) Compensated Temperature.........................40°F to 140°F (4°C to 60°C) Operating Temperature...............................-40°F to 250°F (-40°C to 121°C) Storage Temperature Limits........................-67°F to 302°F (-55°C to 150°C)
压力传感器SA-1001-002规格书说明书
Spec.No.规格书编号：S0568Rev.：1.0Page：1/5深圳市信威电子有限公司版次Rev.变更内容Revision History发出日期Issue Date 制作Issue by 复核Checked by批准Approved by 1.0首版Original release2022-4-20黄哲伦/严子光1.产品简介本压力传感器是基于MEMS 技术的硅压阻式传感器，由扩散硅充油芯片和高精度的信号调理芯片组成。
芯体由316L 不锈钢膜片及壳体和硅油密封，产品外壳采用304F 不锈钢材质，该结构使之能够测量所有与316L 和304不锈钢兼容的流体介质。
外界压力作用在充油芯体上，产生的信号经过两次校准（模拟补偿+信号调理芯片处理）后，以I2C 的形式输出。
Each product has been calibrated in plant to ensure the well accuracy in different environment 每个产品都已经在工厂里进行了标定，以确保产品在各种环境中的测量精度Spec.No.规格书编号：S0568Rev.：1.0Page：2/5深圳市信威电子有限公司3.输出接口及管脚定义注：1.产品的内部电路已经在I2C 总线上放置了4.7K 的上拉电阻2.所有管脚与产品的金属外壳之间是绝缘的4.产品外形结构（单位：mm ）5.功能描述5.1.工作模式传感器的默认工作模式为：产品上电后，进入到休眠状态，仅在接收到相应的I2C 命令后才会启动一次压力和温度的测量动作，之后再次自动进入休眠状态，以节省功耗。
5.2.上电启动及休眠唤醒当电源电压小于0.2V 时，传感器处于复位状态，在电源电压以最低10V/ms 的上升速率经过1ms 的延迟后，I2C 接口处于正常状态，可以接受主机命令，在经过2.5ms 的延迟后，传感器可以进行正常的压力和温度测量。
当传感器处于休眠状态时，在接收到主机命令后的0.5ms 时间内从休眠状态进入到工作模式，详细请参Spec.No.规格书编号：S0568Rev.：1.0Page：3/5深圳市信威电子有限公司照上电时序图6.I2C 接口6.1.I2C 接口电气特性在产品内部，I2C 总线的时钟信号线和数据线已经具有4.7k 的上拉电阻6.2.I2C 通讯速率本传感器的I2C 接口可工作于标准模式（100Kbit/s ）、快速模式(400Kbit/s)、和高速模式(3.4Mbit/s)。
美国威创Viatran
300PSIG 4-20mA 1/4"NPT Viatran 345ARG
50PSIG 4-20mA 1/4"NPT Viatran 345ARG
215PSIG 4-20mA 1/4"NPT Viatran 375CUDDH
美国威创Viatran传感器345BUADH
美国威创Viatran传感器5093BPS
5093BPS锤子联盟压力传感器15000 PSI
美国威创Viatran传感器1402BCGCL6
美国威创Viatran压力传感器2186AMGDC
美国威创Viatran压力传感器1042AU2BRA20
美国威创Viatran传感器2476AFGX984K
美国威创Viatran传感器5705BPSX10520-35MPA
美国威创Viatran传感器345AZADHDNYMPW
美国威创Viatran传感器345AZADHDNYM
美国威创Viatran传感器345BPADHDNPW
美国威创Viatran传感器348BESX1292A
VIATRAN威创公司在压力仪器仪表、压力/温度变送器设计与生产领域享有盛名。其产品应用领域十分广泛，如：油田、矿山特种设备，船舶、航空、军事设备，各种测试平台，管道生产，铸造业，液压系统，各种泵及空压机，钢铁厂，塑料再生，化学品加工，医药、食品生产，能源，污水处理等，可测量表压、绝压、差压等。
VIATRAN配件（广泛应用于油田压裂车上）如：
威创 245ARGX1656C 0-15KG/CM3
威创2476APGX1456H
柱式压力传感器介绍
柱式压力传感器是柱式传感器中的一款，它是一种压力传感器，上部施压，底部受力，单侧出线。
如果有特别需要的话，如底部出线等，厂家也可专业定做!其最大称量可达到400t，也可以称为大吨位传感器。
技术参数是：额定容量20，25，30，40，50，60，70，100，150，200，250，300，400kg 。
灵敏度2.0±0.002 mV/V 。
综合误差±0.03%F.S（20 ~60t）；±0.05%F.S（70 ~400t）。
蠕变±0.03%F.S。
零点平衡±1%F.S 。
零点温度影响±0.02%F.S/10℃。
输出温度影响±0.02%F.S/10℃。
输入阻抗400±10Ω。
输出阻抗352±3Ω；352±5Ω（L≥15m）。
绝缘电阻≥5000MΩ。
工作温度范围-30～+70℃。
安全过载150%F.S。
极限过载250%F.S。
激励电压 10～12VDC。
最大激励电压15VDC。
密封等级IP68。
材质合金钢。
电缆Length:12m（20t）,14m（25～40t），16m（50～150t），20m （200～400t）。
Diameter:Φ8mm；Φ6mm（20t）。
其工作原理是利用电阻应变原理，精度箔片式应变计通过一定的方式黏贴在弹性体上，当传感器受外力作用时，通过外加激励电压将受力的大小转换成相应的电动势，从而达到测量的目的。
可广泛应用于力的测量与分析、生产过程中的自动检测和控制，以及座位各种测量装置中的检测元件。
郑州沐宸自动化科技有限公司目前已涵盖的传感器类别有力传感器、多维力传感器、扭矩传感器、位移传感器、压力传感器、加速度传感器、液位传感器等，同时可根据客户的需求，定制各类传感器，有购买需求的用户可以致电咨询。
AVITEQ振动器MVE50-4讲解
A VITEQ磁力振动器MVE50-4原厂进口A VITEQ振动器MVE50-4，配套控制器SCE-EN50-2，成套德国原厂，口碑良好。
A VITEQ控制器SCE-EN50-2（询价打：15 8 0 5 0 6 1 2 1 3）A VITEQ振动器MV12/50-3A VITEQ控制器SRAE-C50/01-1-1A VITEQ控制器SAE-GS33-2A VITEQ振动器MVC50-4A VITEQ振动器MVB50-4A VITEQ振动器MVD50-4A VITEQ振动器MVE50-4A VITEQ控制器SCE-EN50-2A VITEQ磁力振动器MVES50-1P3)De tetor BHH-200BRINKMANN PUMPTFS 376/4095L/min40bar充电器\SKYLLA-TG24\25 30A victron energy里奇36273PINTER 工作压力开关MANOCOME-IP65/2KA 0-16BARAT0S 型号DHA-0751/2/M24DCDAMCOS 160B4171 指示灯开关卡特蓄电池 9X-9730品牌：麦塔雷斯型号：MHP350A198EVAB207迪创迪创火焰探头X5200A4N13W2，防护等级TP56&ExdIIBT4IDC通讯板（与上面的探头配套的）006642-005电源底板（与上面的探头配套的）006590-003迪创火焰探头PIR9400A3A1AW，防护等级IP56&ExdIIBT4IDC通讯板（与上面的探头配套的）006642-004电源底板（与上面的探头配套的）006586-002LM303摩菲的油位保持器摩菲 DVU150 (55700299) 排泄阀FEDERAL SIGNAL CORPORATION 防爆对讲机正确型号310X-MVCULTER-HAMMER 接触器6702ED584BLAGDON气动隔膜泵B25 1AAABBTTSautronica 16BAR编号40766订货型号是GT300C2G16HYPRO水泵9304C-HM1CViatran PRESSURE TRANSDUCER, MODEL 245, 0-700KPa，0-5 VDC OUTPUT model: 245AMGX1691B加热器\CX/15397-02\380V/6.6KW\CALORITECH阿密龙 3019 95 GPM1.5 黄铜手枪式DYNALCO速度开关SW-200BSPM 2A26611BREVINI 减速机 CTU3200.1 S.N.：728815VS2 开关摩菲MEDC BGEQ4B6B2DDA7RAUTRONICA EAC-300A/B Processor cardDANIAMANT TYPE：L1611)detectormodel : 116-5861-011.5300, MODEL NO.HC300PLB7A2W1; DATE CODE:08DEC057674阿美特克3050水分析仪校验管 305431901SBLAGDON气动隔膜泵B25 1AAABBTTS泰科探头601FEX-MPRICE PUMP3MS50SS-412-21211-100-30-1T5真空泵HITECH INSTRUMENTS氧电池 813-9050WOMA安全阀 G1/2 S8.5 135Bar 1件件号是001.1108autronica detector1)BHH-320/X12)BDH-5003)BDH-500/N4)BDH-500/EX康士廉Part.no 001155 SALWICO本迪克斯 450修井机CAT3408空气压缩机GMC SINEAXModel:808-12120000TRANSMITTERREF:128802本迪克斯干燥器1A-592\AD-2品牌：OLAER奥莱尔型号：ELM0.75-210/00/AFSOLDO品牌限位开关型号: SX02200-2型号: SXC4200-2型号: SX73201-2德鲁克压力传感器PTX-5072-TC-A1-CA-H1-PR巴士德传感器 9692X-1CC-3-BNETSAFETY PHOENIX三频火焰探测器 IR3S-R品牌 WANNER型号 G40XDSNNNNCBMaker: MMC INTERNATIONAL CORP.Type: MMC SAMPLING DEVICE PART NO.:2326C1821540M1/2 40M Closed Self Contained Sampling UnitMaker: MMC INTERNATIONAL CORP.Type: MMC SAMPLING DEVICE PART NO.:S-2562-TS-CPL-SHT TS AdaptorVEGA 型号：PS68.XXE1H2HANAKQualitrol1)092-052-012)CAS-724-1+FLA-644-13)CAS-724-1+FLA-644-1+GAS-046-6EVAC蓝色接口6540524EVAC铜阀套5980800EVAC控制器6541675EVAC控制器5775500Evac冲水按钮3510100Evac水压阀5774002EVAC配件6541056EVAC配件5779400EVAC配件5779500EVAC配件5430103EVAC配件5980800EVAC配件5800000EVAC排气阀5435015Evac水压阀5774000EVAC按钮5900200EVAC气动按钮5900204EVAC带适配器法兰的活化剂6541675EVAC灰水阀6542811EVAC连接套筒5433572EVAC止回阀5959902EVAC橡胶膜片5435169EVAC执行机构5775500EVAC背板总成5780000DNH室内扬声器[][HS-8EEXMNT][]室内扬声器[][HP-10T][]防爆扬声器[][DSP-15EEXMNT][]哈威 V30D-140 RDN-2-1-04 LSN250-1杰斯曼联动台 KST19+KFS10威创压力传感器5705BPSX1052RGS ELECTRO PNEUMATICS LTDModel:VSK1001 SEALS FOR RGS 1''BSP 3 PORT SPOOL CONTROL VALVE H1003-9品牌：BITZERCOMPRESSOR\6H35.2-40P\BITZER REFRIGERATIOTR 编码器/CE100M.ArT.Nr100.00390摩菲室外防雨型振动开关VS2-IP67NUFLO CAMERON：1.Make: NUFLO CAMERON，Model: Turbine Flow Meter ，P/N: 9A-100062687，2.Make: NUFLO CAMERON，Model: Turbine Flow Meter ，P/N: 9A-100062810，3.Make: NUFLO CAMERON，Model: Turbine Flow Meter ，P/N: 9A-100009810，BRINKMANN TFS376/40+001resQmaxmodel:KIT411model:KIT457AMETEK陶瓷过滤器74422SE氧化锆锆头71785SEAUTRONICA控制板模块BSJ-310控制板模块BSD-310控制板模块BSL-310控制板模块BSS-310A世伟洛克Swagelok高压阀.DN12 6000psi.SS-6NBSW8T-G.316SS高压阀门.DN6 PN35.SS-6HNBSW8T-GSMOKE DETECTOR\BHH－500 SMOKE DETECTOR\BHH－500\AUTRONICA FIRE AND SECURITY\火气系统美国SAMSON电磁阀 type 3962, 24VDC, 3/2-way, IP 66, Eex d IIC T6, elec conn. 1/2"NPTLEROY SOMER电机3-LSES225MR-T N703333H11003 2011 IP55IK08 S1 DE:6313ZZC3 NDE:6313ZZC3 △400V 50HZ 1471min-145KW 84Ametrix振动探头5485C-007-040-M13776寸流量计为CAMERON 型号：9A-100062997,Rev.02，显示速度和总量；大8位3 / 4”显示器；电池采用一个“D”型1.5伏碱性电池。
APS Technology MWD LWD传感器产品规格说明说明书
测量 ◆ 通讯 ◆ 分析™/chi 总部NWallingford NUSA 7 Laser LaneWallingford, CT 06492 USA 电话: +1 860.613.4450传真: +1 203.284.7428********************成都N中国中国四川省广汉市福州路二段，邮编618300电话: +86.838.5103.658传真: +86.838.5517.099新疆库尔勒N 中国新疆库尔勒市新城辖区石化路南端电话: +86.996.8792.358Rev. 140828-vC.02产品规格说明如有变更，恕不另行通知© APS Technology, Inc. 2014技术参数表MWD随钻测压传感器APS的随钻测压（PWD）传感器用于测量各种尺寸下无磁钻铤的环空及其水眼压力。
测得的数据可通过APS SureShot MWD/LWD系统实时传输到地面，或先存储到井下内存模块中以供起钻后下载分析。
此外，压力警报也可通过SureShot 系统实时传输。
应用范围:井下压力监测实时测量并监测静态和动态的钻井液循环压力，为实施平衡钻井、控压钻井（MPD），以及欠平衡钻井（UBD）提供依据。
保持地层和井眼的完整性实时传输的环空和水眼压力，有助于评估地层结构中裂缝或空隙中的压力大小。
水力学程序控制在清洁井眼、抽吸和波动压力、固井、BHA内部压耗等多重因素下，实时决定钻井液当量循环密度（ECD）。
支持早期监测程序定时传输的环空、水眼压力，以及两者间的压差值，有助于尽早发现井侵和井漏现象。
产品初步规格。
威创压力传感器5705BPSX1052
威创压力传感器5705BPSX1052
技术参数：
威创压力传感器5705BPSX1052系列压力变送器可用于油井溶解，碎裂及酸化处理。
精确设计及特别坚固的结构专门适用于恶劣的油田场合。
特性：
l FM, CSA 和ATEX本安认证
l WECO Union压力装置
l 抗冲击和震动
l 8种测量传感器设计
l 压力可达20,000PSI
典型应用：
1油井服务：
2溶解
3碎裂
4酸化处理
主要特点：
石油提取经验
Viatran多年石油行业的经验可以帮助我们解决特殊应用场合的问题。
X09变送器为很多本来不可能的应用场合提供了有效的解决方案。
每次解决问题后，我们都会进行改进，为在石油提取应用中提供更多的解决方案。
VIATRAN的独特方法
Viatran独特的坚固装置能在剧烈的震动条件下保证变送器正常工作，无焊接却能达到焊接的效果。
可选用各种认证
“09”系列具有FM， CSA和ATEX安全认证，能够满足所有可适用的CE要求指示。
半平面方式
可选用独特的半平面方式传感器，提供了更小的空间体积，防止了堵塞。
同时也省去了费力的清洁，特别是在粘合场合下。
Viatran已经在油田行业得到了证实。
在本来要求苛刻的场合却得到了成功的解决。
X09和其它多种石油和天然气解决方案都是此类成功的范例。
有创压力传感器 使用说明书
有创压力传感器使用说明书
创压力传感器是一种用于测量压力的设备，通常用于工业控制、医疗设备、汽车行业和其他应用中。
以下是使用创压力传感器的一
般说明：
1. 安装，首先，确定传感器的安装位置，确保传感器与被测物
体之间没有干扰。
然后，根据传感器的规格和要求，进行正确的安装。
通常需要注意保持传感器的稳定和垂直安装，以确保准确测量。
2. 连接，将传感器与数据采集系统或控制系统连接。
根据传感
器的接口类型（如模拟信号、数字信号、电流输出等），选择合适
的连接方式，并确保连接稳固可靠。
3. 校准，在使用前，通常需要对传感器进行校准。
校准过程中
需要使用标准的压力源或校准装置，根据厂家提供的校准步骤进行
操作，以确保传感器输出的压力值准确可靠。
4. 使用，在传感器安装和连接完成后，可以开始使用传感器进
行压力测量。
根据实际需求和测量要求，选择合适的测量范围和采
样频率，进行数据采集或控制操作。
5. 维护，定期检查传感器的工作状态，确保传感器的正常工作。
定期清洁传感器表面，防止灰尘或污垢影响传感器的测量精度。
如
有异常情况，及时进行维修或更换。
总之，使用创压力传感器需要注意安装、连接、校准、使用和
维护等方面的问题，以确保传感器的准确可靠工作。
同时，需要严
格按照厂家提供的使用说明进行操作，以避免因误操作导致的损坏
或安全隐患。
希望以上信息能够对你有所帮助。
威卡（WIKA）F2822型拉 压力传感器操作说明说明书
拉/压力传感器（轮辐式），F2822型示例：型号F28222A D P R 1X 914113.01 07/2021 C N威卡（WIKA ）操作说明，F2822型© 07/2021 WIKA Alexander Wiegand SE & Co. KG 保留所有权利。
WIKA ®是威卡（WIKA ）在各个国家的注册商标。
在开始任何工作之前，请仔细阅读操作说明！请妥善保管以备后用！型号F2822操作说明页码 3 - 203威卡（WIKA ）操作说明，F2822型A D P R 1X 914113.01 07/2021 C N目录1. 一般信息 42. 设计与功能 52.1 型号F2822概述 . . . . . . . . . . . . . . . . . . . . .52.2 描述 . . . . . . . . . . . . . . . . . . . . . . . . .52.3 供货范围........................53. 安全 63.1 符号说明........................63.2 预期用途........................63.3 不当使用........................73.4 操作人员责任 . . . . . . . . . . . . . . . . . . . . . .73.5 人员资质........................83.6 个人防护设备 . . . . . . . . . . . . . . . . . . . . . .83.7 标签/安全标识......................94. 运输、包装和储存 104.1 运输 . . . . . . . . . . . . . . . . . . . . . . . . 104.2 包装和储存 . . . . . . . . . . . . . . . . . . . . . . 105. 调试、运行 115.1 调试前注意事项 . . . . . . . . . . . . . . . . . . . . 115.2 安装说明.......................115.3 拉/压力传感器安装 . . . . . . . . . . . . . . . . . . . 125.4 电气连接.......................145.5 连接放大器 . . . . . . . . . . . . . . . . . . . . . . 145.6 引脚分配 型号F2822. . . . . . . . . . . . . . . . . . . 146. 故障 157. 维护和清洁 167.1 维护 . . . . . . . . . . . . . . . . . . . . . . . . 167.2 清洁 . . . . . . . . . . . . . . . . . . . . . . . . 167.3 再校准 . . . . . . . . . . . . . . . . . . . . . . . 168. 拆卸、返修和处置 178.1 拆卸 . . . . . . . . . . . . . . . . . . . . . . . . 178.2 返修 . . . . . . . . . . . . . . . . . . . . . . . . 178.3 处置 . . . . . . . . . . . . . . . . . . . . . . . . 179. 规格 189.1 认证 . . . . . . . . . . . . . . . . . . . . . . . . 1910. 附件 19附件：欧盟符合性声明 204威卡（WIKA ）操作说明，F2822型A D P R 1X 914113.01 07/2021 C N1. 一般信息■操作说明中描述的拉/压力传感器均采用先进的技术进行设计和制造。
WIKA威卡A-10 压力传感器
WIKA威卡A-10 压力传感器
WIKA威卡A-10 压力传感器适用于一般工业
WIKA威卡A-10 压力传感器应用
机械制造
船舶制造
测量和控制技术
液压和气动技术
泵和压缩机
WIKA威卡A-10 压力传感器功能特性
测量范围：0 …0.005至0 …100 MPa
精度：0.25 %BFSL或0.5 %BFSL
输出：4 ... 20 mA、DC 0 ... 10 V、DC 0 ... 5 V和其他
电气连接：赫斯曼接头A型和C型，M12*1圆形航空接头，
2 m长电缆直出线
过程连接件：G ¼A DIN 3852-E、¼NPT等
WIKA威卡A-10 压力传感器描述
适用于通用工业应用的A-10型压力变送器不仅结构紧凑，而且质量卓越，性价比极高。
该型号变送器提供0.25 %和0.5 %.两种非线性度版本，用户可根据具体应用选择合适的版本。
此外，产品在出厂时还随附测量点的测试数据。
A-10型压力变送器通过cULus和EAC国际认证，能够在全球各地使用。
我们可在短时间内向您提供满足具体操作应用要求的不同压力单元和过程连接的产品。
产品图片
产品尺寸。
威索电气 压差传感器 XC440C 使用手册说明书
XC440C1.1.11.22.概述 (4)3.首次安装 (4)3.1设定制冷剂类型 (5)3.2设定压力探头范围 (5)3.3设定显示类型:相对压力或绝对压力 (5)4.用户界面 (6)4.1显示 (6)4.2键盘 (6)4.3指示灯 (7)5.查看及修改设定值 (7)5.1查看压缩机或风扇设定值 (7)5.2修改压缩机或风扇设定值 (8)6.参数编程 (8)6.1进入“P R1”参数层 (8)6.2进入“P R2”参数层 (8)6.3更改参数值 (9)7.终止输出 (9)7.1在维修时终止输出（一个或多个） (9)7.2输出停止时显示屏上的信号指示 (9)7.3输出停止时的能量调节控制 (9)8.负载运行时间 (9)8.1显示每台负载运行时间 (9)8.2复位每台负载运行时间 (9)9.报警菜单 (10)9.1查看报警 (10)10.编程钥匙使用方法 (10)10.1将控制器中数据传输到编程钥匙中(上载) (10)10.2将编程钥匙中参数下载到控制器(下载) (10)11.锁键盘 (11)11.1怎样锁键盘 (11)11.2键盘解锁 (11)12.参数表 (11)12.1设备数量和能量调节类型 (11)12.2探头设置 (12)12.3其他输入设置 (12)12.4显示和测量单位 (13)12.5压缩机调节 (13)12.6风扇调节 (13)12.7压缩机报警区 (14)12.8风扇报警区 (14)12.9模拟输出 (14)12.10其它 (15)13.能量调节控制的类型 (15)13.1中性区或死区控制（对压缩机而言）（推荐使用的控制类型） (15)13.2线性区（对压缩机或者风扇而言）（特殊情况下使用的控制类型） (16)14.安装固定 (17)15.电气连接 (18)15.1探头连接 (18)16.RS485 串行连接 (18)17.技术参数 (18)18.报警列表 (19)18.1报警和信号处理方式 (19)18.2中止报警 (20)18.3报警状态一览表 (20)19.线路连接 (21)20.参数表–出厂默认值 (22)1.∙此控制器不得作以下说明以外的其他用途，不得作安全保护设备使用∙控制器投入运行前检查应用量程∙Dixell保留在不通知用户的情况下更改其产品组成的权利，但保证产品的规格与功能不改变∙不要在水中或潮湿的环境中使用，防止因大气湿度过高引起温度骤变而导致结露。
QUALITROL油流指示器092-052-01
QUALITROL油流指示器092-052-01联系：郑-工15 260 822 709 Q 72 827 45 85英国WEBTEC流量计CT300R-MA-B-B-6英国WEBTEC涡轮流量计CT300R-MA-S-S-6WEBTEC威泰科CT400R-MA-B-B-6美国VIATRAN全系列产品，并备有油田压裂车上用VIATRAN配件如：VIATRAN传感器245AMGDHWQ威创航空插头10MSPT1106威创压力传感器348BESX1292A威创压力传感器3185BMGX704威创压力传感器3185BFGX704威创压力传感器3185BMGX704,威创压力传感器3185BFGX704威创压力传感器5705-BPSX1052 15000PSI威创压力传感器510BPS威创压力传感器5705BPSX1051VIATRAN的油压传感器5705BPSX1052SPM4寸凡尔体P105741 P105751HDI?电池?E260MEDC手动报警按钮DB3UL048N2CNR + XB11UL02406RNDNNNR MEDC声光报警器BG2EDC1NRNOV接触器30/57674-32-RTCANRIG供驱1050E-500指示灯E09-1022-0101050E-500指示灯E09-1005-0101050E-500保险丝AGC-10AE33-1000-010德鲁克压力变送器PTX5072德国EUCHNER手持操纵盒HBA-079827SEA TEL8897B-21 序列889709090089 部件号125570-4EAO N35195 P/N:22-903.5 N35194 P/N:22-903.4 N35192 P/N:22-903.2 N35197 P/N:22-903.7DERRICK胶条3660-5-30V ARCO 油压开关87542-1挪威AUTRonICA 烟感探头BHH-200马丁戴克泵压传感器E17-152DRECO泥浆泵配件阀门盖锁扣P/N: A9551167 4件缸套组总成P/N:43061083 6件公变径P/N:A9551171 3件母变径P/N:A9551170 3件密封P/N:7006B061 10件T型密封P/N:7006B062 4件排气螺纹法兰P/N:A9551177FAIRCHILD电器转换器：TT6000-406MAGNEMAG 丹麦型号电源模块,HSU 100-32-07 订货号:G0169,侧喷备用电池，配件号：0000-6960-84\配件规格型号：1069037\配件生产厂家：NATIonAL OILWELL，VIATRAN 威创3405BFGBY 压力传感器 2340系列被347系列替代替代件号为3475BFGBYDWLR威创5705bpsx1052压力传感器•威创插头10MSPT1106威创5705BMSNZ5705BQSNZ威创5093BPS升级型号510BPS威创5093BPS•威创510BPS 1个对于压力值为15000PSI和20000PSI威创510BPS 1个气动注脂器, 型号: G-A8GUN-C加拿大SEALWELD润滑脂，SEALWELD 密封脂，SEALWELD 清洗剂是针对陆地和海上长输管道、炼油化工装置、油田井口装置、天然气处理装置上的阀门维修和完整保养对高合成化学物质的迫切需要应运而生的。
IEC滑环
IEC滑环TBNP-6-8-LED资料苏工 189 6040 54 67 Q1467 22 9908 IEC滑环IEL-DA-8IEC 单芯滑环I-30-91-P864IEC滑环 BXSN-8-PT168GVARCO牙板 16402-6BETTIS电动装置 EM-500M-30-C4-07-006 50(2)美国IECBXSN-12-MS12-MS12ORGA L303SA-C-H20-300L304EX-C-40034B00800VARCO配件51300-359-F马丁戴克超声液位传感器222573-00VARCO按钮开关30087708-02cameron流量计8寸 9A-100012094cameron流量计4寸 TM0400VARCO配件80450-6卡洛克油封 53X8630 R2SPM润滑脂P13336卡洛克密封21911-4438库美10-00253肯沃斯方向助力器16703A786B2 OBSERVATOR OMC－406DIXON安全绳WB1ORGA导航系统蓄电池组开关36T00091 ORGA导航系统蓄电池组开关40T90210摩尔斯185.1048－00威创压力传感器348BESX1292ACameron8寸流量计传感器9A-1000020778寸流量计插头9A-1000051174寸流量计插头10908-01/10华高节流阀电阻 0100-0135-02继电器 0000-6898-79浮子开关 7818493BILLY PUGH救生衣WVO-50VARCO配件3位选择开关30087708-33 VARCO电位器?81736-2ORGA导航灯灯泡；LAMP；ATRT NO：010085；ORGA用于导航灯/L303FM－C－G20－300 AROX?Drain?Valve/出口阀PRI340055051 VARCO电路板116199-7VARCO油泵电机109755-2华高螺栓50008-14-C5D威创压力传感器5093BMST85Dynisco 传感器TPT4634-35MPA-6/18-TC6 BETTIS密封圈维修包62830KITNOV互感器0100-3600-38GESSMAN 司钻房操作No.07072771/20A-14.6A. 250V AC/DC. Type:V61B3 马丁戴克泵冲传感器232389马丁戴克立压传感器手动加油泵212450-101GRACO高压清洗泵软管247878GRACO高压清洗泵油嘴805433GRACO高压清洗泵油嘴805459摩菲油浸式液压压力表A25P-OS-3OODWYER德威尔?压力开关Cat.No1823-1DNH喇叭 HS-15EExmNTFRIEDRICH空调SL36N30NUFLO脉冲输出板 9A-1000005121Viatran机油压力传感器245AMGDHWQViatran进气压力传感器245AFGTUWQViatran排气压力传感器245AMGTUWQViatran电缆接头10MSPT1106卡洛克油封24799-0109NOV安全阀34000-02-0nov修理包34005Turbines流量计TM0150威创传感器2476APGX1456卡洛克油封53*8630 R2GARBARINO POMPE叶轮2200UBA8Q4500DYNALCO转速表SPD-100NUFLO修理包9A-100061174NUFLO三寸修理包2295259-01GAI-TRONICS 防爆内部对讲话站400-001FHF防爆墙装自动电话11286101 防爆ExdIIBT4 IP56GARBARINO POMPE环1521LBA8R8R01AGARBARINO POMPE轴承3011-6313-2RS OBSERVATOR温度/湿度传感器OMC-406Italvibras电机VMX 15/3810挪威RAPP BOMEK FDLORB049（5316/8 RH）OTECO压力表361411马丁仪表10128194-001Bettis执行器维修包BET 62830AUTRONICAZENER BARRIER UNIT BZ-32/4德瑞克电机SGX55-15-380V/400-5-001qualitrol corp品牌POWER SUPPLY IN:220VAC[PR5203] CONTRACT CODE: 35.2.1S/N: 963制造厂零件编号SENS-933-3800009 BOX, JUNCTION,DVC100, MARINEP/N: 04220-A-1001Mfr: SIEGER 2个P/N: 04220-A-1001停产，替代型号 DVC100M MK2 macnaught气动油脂泵P3 pm9AMETEK，PART NUMBER:1981L-170028XLG，AMETEK，PART NUMBER:150030XDYNALCO转速探头M319德鲁克压力变送器PTX5072品牌：AMOT，节温器ZBOCT11001.0.AA，节温器H/4CCMCT12001.00.AA，英国MEDC气溶胶手动释放按钮EXDIIBT4GAI 0键话机2200L2424212N21OBSERVETOR风向风速传感器OMC-160马兰士VHF对讲机HX280SDYNISCO 压力控制器ATC770-0-3-3康士廉的火警按钮NS-ACPITALVIBRAS振动电机 MVSI3/800-s90丹麦SAILOR双向无线电话SP3520丹麦SAILOR高频电话主机RT6222荷兰OBSERVATOR风速风向传感器OMC-118 温湿度传感器OMC-406 OMC-422 气压传感器OMC-506 信号处理单元OMC-183 显示单元OMC-938AUTRONICA压力传感器372487康仕廉SZ2HZ003/UB-2 SZ2HZ003/EN54-5ALCAD的UPS镍镉电池 MC285PALCAD电池SV230P索拿 1113305，1113306，挂钩2104700MURPHY转速表，型号：ATHA-30-A里奇 83150 468HWS厚壁钢管用绞接式重负荷管割刀,6"-8"APPLETON应急照明灯：FEB218BUSAE密封脂\400Lb/181kg\JET－LUBE INCgrease:Jet Lube EZ Turn No.3 Airtic for X-mas tree. , Part Number: SP-90-25736Rosemount（罗斯蒙特）3051CD3A22A1B1I1M5Q4Q82088G1S22A2B4I1M7Q4Q8 3051CD4A22A1BI1M5Q4Q8罗斯蒙特的压力变送器305S1S1TG2A2E11A1ADA2B4M5罗斯蒙特手操器 475HPIENA9GM9GIFT G13134快速接头安全绳DIXON WB1GIFT G13134快速接头安全销DIXON AC1GIFT G13134快速接头胶芯DIXON AWR4GIFT G13134快速接头三通DIXON AM10GIFT G13134卡箍规格型号：DIXON A4GIFT G13134卡箍规格型号：DIXON A9GIFT G13134卡箍规格型号：DIXON A14GIFT G13134卡箍规格型号：DIXON CD挪威DNH 全天侯定压式号筒扬声器 DST-100Lewis刘易斯1/2" - 1" Lewis Snake, WLL: 2500 LBS - for wire rope1/2" - 1" Lewis Snake, WLL: 2500 LBS - for wire ropebettis GO1010-sr4cw-h3hwPHILIPS灯泡 C100S54/ALTO阿勒密特黄油枪71494RGAI-TRONICS远程传输模块，含光端机LE200-FLROTECO130367 3” RRV 1500-5000PSI W/3” FIG 1502 FEMALE INLET & MALE OUTLET STANDERDCOMET抛绳器art NO 9112700能美探头 FDS511能美511-65型感温型探测器NUFLO流量计DYNISCO压力传感器MDT462L-M18-7C-15/46威泰科流量计CT60-MA-B-B-1罗斯蒙特压力表 3051TG4A2B21JB4E8M6DEMCO6寸 J022124-1215311VIATIAN传感器3185BFGF51ZOBSERVETOR尾翼组件OMC-9155DET-TRONICS火焰检测装置X3301A4N13W2阿普顿ACP6034BC插接件NUFLO流量计1000012090NUFLO流量计9A-1000012094德鲁克PTX1400C-15 0-0.025MPARosemount（美国罗斯蒙特）手操器通讯器475HP1EKL9GMTS VIATIAN威创传感器348BESX1292ALewis HCB-BDRUCK德鲁克压力变送器PTX7517-4426 0-2.5MPa 4-20ma 9-30vCLA-VALPOWERTROL，TYPE：100-02，3/8"，USED FOR：FIRE DELUGE VALVE\800GS/100-43德国FHF防爆电话型号 ExdibⅡCT6（ H2)HJ－6AUTRONICA SMOKE DETECTOR HEAD\BHH－200/X1Italvibras电机美式型号VMX 18/8300中式型号VMX 15/3810GIAMOX 投光灯灯罩GIFL2X400 HS/HIE40Italvibras电机CDX 15/3810 现货SAILOR 6210 VHFSAILOR 6210 标配SAILOR对讲机sp3550SAILOR对讲机sp3510SAILOR 天线 SP3941SAILOR 电池 SP3901SAILOR SP3520 便携式 VHF 对讲机SAILOR 6210 VHFSAILOR无线电收发报机会议室新装VHF，型号：SAILOR RT2048应急对讲机应急锂电池\ST803905/SP3110丹麦SAILOR双向无线电话SP3520丹麦SAILOR高频电话主机RT6222手提GMDSS VHF 对讲机\配件号：637005\配件规格型号：VHF SP3110 SAILOR 6215 VHF CLass DSAILOR N163SSAILOR 6202 Hand MicrophoneSAILOR 6201SAILOR 6197 EDS-205 Moxa SitchSAILOR 6081 Power SupplySAILOR 6080 AC/DCSAILOR SART IISAILOR SP3520SAILOR HF/SSB KUM803-1SAILOR 6110 GMDSS SystemSAILOR H1252B/TT-3608ASAILOR 6006SAILOR 6334C A4 GMDSS ConsoleSAILOR 6216 VHF CLassd D-FCCSAILOR 6222 VHFSAILOR 6248 VHFSAILOR 6249 VHFSAILOR SP3500 SeriesSAILOR SP3500 ATEX RadiosSAILOR 6310MF/HF 150WSAILOR 6000C Consoles。
Velomitor CT速度传感器 说明书
尺寸图
图 1: Velomitor® CT 外形图
BN 部件号 141636-01 版本 A, 2001 年 4 月
Page 4 of 8
备件安装接头
标准双头螺栓 Standard Studs
3/8-24 to 3/8-24 04365657 M6X1 to M6X1 87931-01 3/8-24 04284020
Page 6 of 8
100
10
"
1"
.1
"
1 .0
" 1" 10 1" 00 0
10 2.5
g
00 .0 1 00 0
g
Velocity (in/s pk)
1
g 01 g 01 " "
.1
Operating Region
0 00 .0 1 0
0.009
.01
0 .0 1 0 00 g
.001 (Hz) 1 1.5 (CPM) 60 90
六角平 板双头螺栓 1-3/8 Hex Plate Studs
3/8-24 UNF to 1/4 NPT 107754-01
3/8-24 to 3/8-24 107756-01
3/8-24 UNF to 1/4-28 UNF 128038-01
M6X1 to M6X1 107757-01
Quick Disconnect Studs 快速拆卸双头螺栓
粘合性安装基座组件 这些组件用于因壳体太薄而无法钻孔和攻出螺纹安 装孔的机器。
BN 部件号 141636-01 版本 A, 2001 年 4 月
Page 3 of 8
®特 特氟伦涂层不锈钢铠装 Teflon®
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Viatran is oil field proven. When often begins as a nagging application turns into a successful solution. The X09 Series, and the various other oil and gas solutions, are shining examples of this success.
PRESSURE TRANSMITTER
Models 509 / 709 / 809
Performance Full Scale Pressure Range .........................0-5K, 10K, 15K, 20K PSIG (0-345, 689, 1034, 1379 bar)
A Dynisco Company
PRESSURE TRANSMITTER
Models 509 / 709 / 809
FEATUREs
finite element analysis
• FM, CSA and ATEX Intrinsically Safe Models available
• Hammer Union pressure fitting • Shock and vibration resistant • Eight gage sensor design • Pressure up to 20,000 psi (1379 bar)
509...........................................................9-30 Vdc (12 to 28 Vdc w/approval) 709...........................................................9-30 Vdc (12 to 28 Vdc w/approval) 809...........................................................10 Vdc nominal (15 Vdc max) 509...........................................................≤±0.01% FSO per Volt 709...........................................................≤±0.01% FSO per Volt 809...........................................................Output varies with input (calibrated at 10 Vdc) 509...........................................................4 - 20 mA at 70°F (21°C) 709...........................................................0 - 5 Volts at 70°F (21°C) 809...........................................................3 mV/Volt at 70°F (21°C) 709...........................................................7.5 mA 809...........................................................1 mA at 10 Vdc nominal 509...........................................................750 Ohms maximum at 24 Vdc 709...........................................................410K Ohms minimum for <1% FSO attenuation 809...........................................................350 Ohms minimum for <1% FSO attenuation Range Calibration Signal.............................100% of FSPR 509...........................................................9-30 Vdc at 15 mA nominal 709...........................................................Short pins E & F 807...........................................................Short pins E & F Calibration Signal Accuracy.........................≤±0.2% FSO. The exact signal to pressure correlation is provided .................................................................with each unit Circuit Protection........................................Varistor protected across the input leads for surges to 1000V at 50 .................................................................mSec. Reverse polarity protected Bridge Resistance......................................10K Ohms nominal Insulation Resistance..................................≥100 MegOhms to case ground Electrical Connection..................................Mates with Bendix P/N PT06E-10-6S or equivalent. See table for pin .................................................................connections
typical applications
• Oil Well Servicing - Cementing - Fracturing - Acidizing
Oil extraction experience
Viatran’s years of oil field experience helps us solve typical application problems. The X09 was created as a solution to the application that a customer couldn’t solve. Once solved, we modified the unit to accomplish even more in oil extraction.
semi flush
Our exclusive semi flush design provides a lower cavity volume to prevent clogging. This eliminates the need for tedious cleaning, especially in cementing applications.
viatran’s alternative
Viatran’s unique fastening system locks under severe vibrations ensuring that the environmental integrity of the assembly is maintained much like a welded unit without welding.
Electrical
Supply Voltage
Power Supply Regulation Effect (Calibrated at 12 Vdc)
Output Signal
Current Draw
Load Impedance
Calibration Power
For more information, contact Viatran.
Viatran 3829 Forest Parkway Suite 500 Wheatfield, NY 14120
Hotline: 1-800-688-0030 Phone: 1-716-629-3800 Fax: 1-716-693-9162 Email: solutions@
Instability can also come from subtle variations in the Hammer Union and tightening torque. These variances generate point loading of stress on the sensor. Viatran’s product development engineers used Finite Element Analysis (FEA) to determine the most effective distribution of the strain gages to reduce the clamping effect. The resulting eight gage sensor design is unaffected by the orientation or tightness of the nut. Using FEA, the X09 Series has been designed with high overpressure protection, allowing it to withstand pressure spikes found in oil field equipment.