模具保管协议-范本 中英文版

模具保管协议

Mould Keeping Agreement

合同号/ Contract No.

甲方：

（hereinafter “Party A”）

乙方：

（hereinafter “Party B”）Individually called Party A and Party B respectively and/or the “Party” and together, called the “Parties”.

经过友好协商和在公平、平等的原则基础上，双方约定如下：

After friendly consultations and proceeding on principles of fairness and equality, the Parties have agreed the following:

一、保管模具内容/Mould Info.

以上价格已含17%的增值税. The above prices include 17% VAT.

三、保管约定/Commitment

1) 甲方将如上的模具寄存于乙方。所有寄存模具的所有权归甲方所有。非经甲方书面同意，乙方不得为自己或他人复制或仿制该模具。Party A puts the above moulds in Party B. The ownership of the storage moulds belongs to Party A. Party B cannot copy or imitate the moulds for itself or for others without the written permission of Party A.

2) 乙方承诺不去掉寄存模具上的名称和标记，并将这些寄存模具与其它企业的物品分开存放，使这些寄存模具能够很容易地被辨别出来。Party B promises not to remove the name and marks on the storage moulds and keep them separately with other items in order that they can be identified easily.

3) 任何寄存于乙方的本约模具只能由受过专门培训的员工使用和操作。除正常磨损外，乙方承诺对这些寄存模具进行维护以使其保持良好的状态，且保管期间发生的一切费用由乙方承担。在保管或使用这些寄存模具时，乙方要为这些模具投保，保险金额应等同于这些寄存模具的替换成本，若有丢失或损坏，则以同等价格赔付给甲方。Only specially trained staff can use and operate the moulds. In addition to normal wear and tear, Party B promises to maintain the storage moulds in order to keep them in good condition and undertake all the costs that occurred during the keeping time. Party B should buy insurance for the storage moulds when keeping or using them. The insurance amount should be equal to the replacement cost of the storage moulds. If lost or damaged, Party B should compensate Party A with the mould price listed on the agreement.

4) 乙方应当对用寄存模具生产出的样件进行检验，以确定这些模具是否符合甲方的工程图纸和规范要求。乙方必须在收到甲方的书面确认样件合格后正式批量生产产品。Party B should inspect the sample which is produced by the storage mould to determine whether the moulds fit with the engineering drawings and specifications from Party A. Party B will start mass production after receiving the written confirmation and acceptance from Party A.

5) 乙方每月向甲方提交一份有关各模具的维护报告。报告内容应包括：上一个月对模具进行维护的情况以及该模具的当前状况。Party B should submit a monthly maintenance report about the moulds to Party A. The report should include the mould’s maintenance conditions of last month and its current situation.

6) 未经甲方书面同意，乙方如利用或提供本约之模具为甲方以外之人加工、生产或将其生产之产品销售给甲方以外之任何人时，乙方须给付甲方其生产、转售总值之十倍违约金。If Party B uses the storage mould to process, produce or manufacture the products to sell to any person other than Party A without the written permission of Party A, Party B shall pay Party A of its production and resale value of ten times the penalty.

7) 甲方可随时取回该模具，乙方不得以任何理由扣留，否则自甲方要求取回该模具之日起，每逾期一日，按该模具总价之25%进行罚款，由甲方支付给乙方之货款中自行扣除。如货款不敷抵扣时，由乙方另行赔偿。Party A can take back the storage moulds at any time, Party B should not detain them for any reason or from the date that Party A required to take back the moulds, each overdue day, Party B shall pay the penalty of 25% of total moulds’ cost to Party A and the penalties will be deducted from the moulds’keeping cost paid to Party B. If payment is insufficient to offset, Party B should pay for the compensation separately.

四、保密责任/Confidentiality

未经甲方允许，乙方不得将甲方所提供的图纸及技术资料以口头、书面、出示和借用的方式转泄露给第三方。如有发生信息泄露,甲方有权追究其法律责任。Without the permission of Party A, Party B should not disclose the drawings and technical information which are provided by Party A in oral, written, showing and lending way to the third Party. If Party B revealed such information, Party A has the right to pursue