503说明书合订版本
Nokia_Asha_503 使用手册
Nokia Asha 503 双卡版型号：RM-922目录安全事项 4使用入门 6按键和组件 6插入 SIM 卡、电池和存储卡 6为电池充电 8设置要使用的 SIM 卡 8从旧手机复制联系人 9基本功能 10屏幕指示符号 10触摸屏操作 10在视图之间切换 12检查您的活动 13快速更改设置 13延长电池使用寿命 14重新整理应用程序功能表 14对锁定屏幕进行个性化设置 15更改铃声 15添加全键盘或手机小键盘 15添加书写语言 15全键盘上的按键 16输入英语时使用全键盘输入 16小键盘上的按键 16输入英语时使用小键盘输入 17使用联想文字输入法 17使用中文手写识别 18使用全键盘拼音输入法 18使用小键盘拼音输入法 19使用全键盘的笔画输入法 20使用小键盘的笔画输入法 20诺基亚应用商店 21联系人与信息 22拨打电话 22储存姓名和电话号码 23将社交信息添加到联系人 23更新您的状态 23发送信息 23 Exchange 邮件同步 24设置邮件帐户 25发送邮件 25查看语音邮件 26相机 27拍摄照片 27录制视频 27共享照片或视频 28互联网 29浏览网络 29将网站添加到收藏夹 29娱乐 30播放歌曲 30收听广播 30Nokia Asha 503 双卡版办公工具 31更改时间和日期 31设置闹铃 31增加日历项 31使用农历 32手机管理和连接 33使用“快享”共享您的内容 33连接到 WLAN 33在手机和计算机之间复制内容 34更新手机软件 34在航班模式下使用您的手机 34密码 35产品和安全信息 37安全事项请阅读以下简明的规则。
不遵守这些规则可能会导致危险或触犯法律。
在禁止使用手机的区域应关机当禁止使用手机或手机的使用会引起干扰或危险时 (例如，在飞机上，在医院中或医疗设备、燃料、化学制品或爆破地点附近)，请关机。
请遵守受限制区域中的所有规定。
首先要注意交通安全请遵守当地的所有相关法律法规。
Moxa PT-G503 三口全GB接口冗余箱说明说明书
PT-G503SeriesIEC61850-3/62439-33-port full Gigabit managed redundancyboxesFeatures and Benefits•IEC61850-3,IEEE1613(power substations)compliant•IEC62439-3Clause4(PRP)and Clause5(HSR)compliant•PRP/HSR Coupling and QuadBox functions supported•Ethernet console reserved for local access•Built-in MMS server based on IEC61850-90-4switch data modeling forpower SCADA•Hardware-based IEEE1588v2PTP supported•Design ready for NERC CIP compliant system development•Isolated redundant power inputs with universal24VDC,48VDC,or110/220VDC/VAC power supply range•-40to85°C operating temperature rangeCertificationsIntroductionThe PT-G503-PHR-PTP Series redundancy boxes(RedBoxes)are compliant with the latest standardized redundancy protocols for industrial automation networks,IEC62439-3Clause4(Parallel Redundancy Protocol,PRP)and IEC62439-3Clause5(High-availability Seamless Redundancy,HSR).PRP/HSR ensures the highest system availability and data integrity for mission-critical applications in electrical substation and/or process automation systems that require zero recovery time redundancy.The redundant protocols Coupling and QuadBox are also supported.With Coupling and QuadBox,HSR rings can be connected to make the redundant network more versatile.The PT-G503-PHR-PTP Series comes with three10/100/1000BaseT(X)and100/1000BaseSFP slot combo ports.One slot(INTERLINK port)is for an internal link for connecting with a SAN(Singly Attached Node).The other two ports(LAN A and LAN B ports)are for PRP/HSR redundant protocol communications.With this full Gigabit Ethernet port design,the PT-G503-PHR-PTP Series provides high performance for PRP/HSR systems.The PT-G503-PHR-PTP Series also provides IEEE1588v2PTP in end-to-end one-step transparent clock mode for timing-critical applications and isolated redundant power inputs with24/48VDC or110/220VDC/VAC power supply ranges to increase the reliability of the power supply. Additional Features and Benefits•PRP(Parallel Redundancy Protocol):Transmit or receive two independent active paths to/from different LANs simultaneously on a zero recovery time network•HSR(High-availability Seamless Redundancy):Every frame is duplicated and then transmitted in both directions of the HSR ring to deliver zero switchover time•PRP/HSR coupling:Supports coupling from an HSR ring node to redundant PRP LANs(Up to7PRP LANs)•QuadBox function:Supports peer coupling of rings via interconnecting two INTERLINK ports on two separate RedBoxes •Fiber Check™provides monitoring and diagnosis functionality on SFP fiber ports•Hardware-based IEEE1588v2PTP(Precision Time Protocol)end-to-end one-step transparent clock for precise time synchronization of networks•Automatic warning by exception through email and relay output •Configurable via web browser,CLI,Windows utility,and ABC-02 automatic backup configuratorSpecificationsEthernet Interface3Combo Ports(10/100/1000BaseT(X)or100/1000BaseSFP+)Console Port Ethernet console(10/100/1000Mbps RJ45)Standards IEEE802.3for10BaseTIEEE802.3ab for1000BaseT(X)IEEE802.3u for100BaseT(X)and100BaseFXIEEE802.3z for1000BaseSX/LX/LHX/ZXEthernet Software FeaturesFilter Static MulticastIndustrial Protocols Modbus TCPManagement Back Pressure Flow Control,BOOTP,DHCP Client,Fiber check,Flow control,HTTP,IPv4/IPv6,LLDP,Port Mirror,RARP,RMON,SMTP,SNMP Inform,SNMPv1/v2c/v3,Syslog,TelnetPower Substation MMSRedundancy Protocols HSR,PRP,RSTP groupingSecurity HTTPS/SSL,TACACS+,RADIUS,SSH,Trust access controlTime Management NTP Server/Client,SNTP,IEEE1588v2PTP(hardware-based)MIB IEC62439-3MIBUSB InterfaceStorage Port USB Type ASerial InterfaceConsole Port USB-serial console(Type B connector)Input/Output InterfaceAlarm Contact Channels Resistive load:1A@24VDCDigital Inputs+13to+30V for state1-30to+3V for state0Max.input current:8mAPower ParametersInput Voltage PT-G503-PHR-PTP-HV:Redundant dual inputs110/220VAC/VDC(85to264VAC,88to300VDC)PT-G503-PHR-PTP-WV:Redundant dual inputs24/48VDC(18to72VDC)Overload Current Protection SupportedReverse Polarity Protection SupportedInput Current PT-G503-PHR-PTP-HV:0.260/0.170A@110/220VACPT-G503-PHR-PTP-HV:0.150/0.080A@110/220VDCPT-G503-PHR-PTP-WV:0.660/0.360A@24/48VDCPower Connector1removable5-contact terminal block(s)Physical CharacteristicsHousing AluminumIP Rating IP40Dimensions(without ears)80x160x110mm(3.15x6.30x4.33in)Weight1210g(2.69lb)Installation DIN-rail mountingEnvironmental LimitsOperating Temperature-40to85°C(-40to185°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsSafety UL508EMI EN55032Class A,CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:35V/mIEC61000-4-4EFT:Power:4kV;Signal:4kVIEC61000-4-5Surge:Power:4kV;Signal:4kVIEC61000-4-6CS:10VIEC61000-4-8PFMFIEC61000-4-11DIPsPower Substation IEC61850-3,IEEE1613Railway EN50121-4MTBFTime PT-G503-PHR-PTP-HV:566,844hrsPT-G503-PHR-PTP-WV:440,857hrsStandards Telcordia(Bellcore)Standard TR/SRWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x PT-G503Series switchCable1x USB type A male to USB type B maleInstallation Kit1x DIN-rail kit1x cap,for type A USB port4x cap,plastic,for RJ45port1x cap,plastic,for console port3x cap,plastic,for SFP slotDocumentation1x document and software CD1x quick installation guide1x warranty card1x product certificates of quality inspection,Simplified Chinese1x product notice,Simplified ChineseNote SFP modules need to be purchased separately for use with this product.DimensionsOrdering InformationModel Name Max.No.of Ports Max.No.of GigabitPortsCombo Ports10/100/1000BaseT(X)or100/1000BaseSFPInput Voltage Operating Temp.PT-G503-PHR-PTP-WV33324/48VDC-45to85°C PT-G503-PHR-PTP-HV333110/220VDC/VAC-45to85°CAccessories(sold separately)SoftwareMXview Industrial network management software designed for converged automation networksSFP ModulesSFP-1FELLC-T SFP module with1100Base single-mode with LC connector for80km transmission,-40to85°Coperating temperatureSFP-1FEMLC-T SFP module with1100Base multi-mode with LC connector for4km transmission,-40to85°Coperating temperatureSFP-1FESLC-T SFP module with1100Base single-mode with LC connector for40km transmission,-40to85°Coperating temperatureSFP-1G10ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G10ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G10BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G10BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G20ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G20ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G20BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G20BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G40ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G40ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G40BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G40BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1GEZXLC SFP module with11000BaseEZX port with LC connector for110km transmission,0to60°C operatingtemperatureSFP-1GEZXLC-120SFP module with11000BaseEZX port with LC connector for120km transmission,0to60°C operatingtemperatureSFP-1GLHLC SFP module with11000BaseLH port with LC connector for30km transmission,0to60°C operatingtemperatureSFP-1GLHLC-T SFP module with11000BaseLH port with LC connector for30km transmission,-40to85°C operatingtemperatureSFP-1GLHXLC SFP module with11000BaseLHX port with LC connector for40km transmission,0to60°C operatingtemperatureSFP-1GLHXLC-T SFP module with11000BaseLHX port with LC connector for40km transmission,-40to85°Coperating temperatureSFP-1GLSXLC SFP module with11000BaseLSX port with LC connector for500m transmission,0to60°C operatingtemperatureSFP-1GLSXLC-T SFP module with11000BaseLSX port with LC connector for500m transmission,-40to85°Coperating temperatureSFP-1GLXLC SFP module with11000BaseLX port with LC connector for10km transmission,0to60°C operatingtemperatureSFP-1GLXLC-T SFP module with11000BaseLX port with LC connector for10km transmission,-40to85°C operatingtemperatureSFP-1GSXLC SFP module with11000BaseSX port with LC connector for300/550m transmission,0to60°Coperating temperatureSFP-1GSXLC-T SFP module with11000BaseSX port with LC connector for300/550m transmission,-40to85°Coperating temperatureSFP-1GZXLC SFP module with11000BaseZX port with LC connector for80km transmission,0to60°C operatingtemperatureSFP-1GZXLC-T SFP module with11000BaseZX port with LC connector for80km transmission,-40to85°C operatingtemperature©Moxa Inc.All rights reserved.Updated Nov12,2018.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
PHILIPS x503 phone Manual说明书
1. 按 4、 6、 6、 3。
> 屏幕上显示列表中的第一个单词：Good。
2. 按 浏览并选择 Home。
3. 按 L 选择 确定。
重复按键输入 (ABC/Abc/abc) 按所需字母的对应键输入单词。按一次可输 入按键上第一个字母，快速按两次可输入按 键上第二个字母，以此类推，直至所需字母 出现在屏幕上。
了解您的手机
手机背面：3.2 百万 像素照相机
充电器及数据线插口 左功能键
接听键 字母数字键盘 锁定 / 解锁 键，符号输入
3.5mm 耳机插孔 +/- 音量键
TFT 液晶屏幕
右功能键
导航键及 ,(OK) 键
开 / 关机，挂机 及返回待机屏幕
开启 / 关闭会议模 式，输入法选择
飞利浦将不断力争改善产品性能。因此，飞利浦保留修改本用户指南的权利，如有更改，恕不 另行通知。飞利浦力求确保该用户指南的信息准确性，但不承担用户指南与产品之间存在任何 错误、遗漏或差异的责任。本手机用于连接 GSM/GPRS/EDGE 网络。
入 SIM 卡”步骤 3）。 2. 确认手机已开机。
必要时，长按 ) 开机。如需要，输入
PIN码。PIN 码为4到8位的SIM卡保护码， 由网络运营商或零售商预设并提供。
如果输入 PIN 码连续 3 次错误， SIM 卡将被 锁定。如需解锁，您必须向网络运营商索取 PUK 码。
+ - 3. 手机进入模式设置屏幕。按 或 选择：
如何输入单词 “Home”：
按 4、4 (GHI)， 6、6、6 (MNO)， 6 (MNO)， 3、 3 (DEF)。
4
目录
Table of contents
Checkbox Compact Info 503 商品说明书
In which branches of industry is the Checkbox Compact used?
New. Checkbox Compact
Total quality within the feed process: The compact alternative
Info 503
Small in format – big in performance: The Checkbox Compact
Profitability – newly defined Contactless type identification, orientation detection and quality inspection of small components by means of the Checkbox Compact facilitates the constant, smooth feeding of conveyed parts within a production process. This means that interruptions in the feeding of components are a thing of the past and system availability increases significantly. At the same time, integrated quality inspection ensures a consistent high quality of the components supplied. Even at a high speed and resolution, the reliability of the Checkbox Compact is impressive.
YS-503封箱机说明书
9
加盖架
FJ-3A-04-8
1
10
联接板
1
11
上支撑架
YS-503-09
1
五、机芯
1
2
3
45
6 12 7
8
9
10
11 12
8
7
20 19
18 17
16
13
21 6 15 14
序号 1 2 3 4 5 6 7 8 9 10 11 12 13
名称 侧板 导轮组合 单向网纹辊组合 刀架 前爪组合 方柱(1) 轴 缓冲套 侧板(3) 轴 轴 轴 侧板（2）
4.5 可调整部位
4.5.1 上输带装置高度的调节（见图 4-2） 手摇高度调节手柄，通过链条传动，带动升降丝杆转动，使升降螺母上
下移动而使飞机头上下移动来调节上输送带装置高度。
后立柱部件
飞机头
后立柱部件
手轮 张紧轮
高度调节手柄
链轮 链条 升降丝杆
升降螺母
图 4-2
6
5
维修与故障排除
5.1 维修时的安全警告
①.确保已切断总电源 ②.维修人员请勿赤脚进行维修
5.2 定期的维修与清洁
①. 要定期检查各零部件螺丝有否松动 ②. 要定期对机器的重要部件用油润滑 ③. 保持机器表面的清洁 ④. 每天用酒精清除刀片上的异物 ⑤. 机器长期不用时，刀片要进行涂油保护
5.3 常见故障及排除方法
①.胶带纸偏离箱体中心:调整胶带的位置（见图 5-1）
5 下支撑板 FJG-1A-178 2
13
摇手柄
1
6
轴承座
FJ-3A-162 2
14 升降丝杆（一） FJ-3A-157 1
ZW-503-客服主管职务说明书
负责控制、分析现金差异,提出解决方案
1、及时找出原因，解决问题
2、提升收银员操作技能,将差异减少到最小
7
巡场、解决突发事件、督促礼貌待客的优质服务
1、及时解决收银台缺零，商品扫描错误等问题并予以解决
2、保证结帐区机台与环境的整洁
3、为顾客提供良好的服务
8
每日下班监督员工将款包及时交到总收
1、确保准确、安全回收所有货款
职务说明书
职位名称：客服主管
职位编号
部门
门店
部门定员
组别
客服组
直接上级
店长
直接下属
收银员、服务台员工
工资级别
月薪标准
审核
批准
序号
工作内容
工作标准
1
制定本组工作计划或行动方案
1、每周做一次下周工作计划及相应的行动方案
2、报店长审阅
2
保持与店长良好的沟通
1、通过部门协调会议提出本组的工作困难或协调事项，寻求店长及其他各部门的支持与配合
23
保管本部门的印章及使用印章
1、无损坏,无丢失
2、按规定使用
24
检查本部门各种服务工具(播音系统、电脑、会员打卡机等）
1、及时维修、保养
2、保证工作完成
25
其他工作
客服主管任职资格
性别:男女均可
年龄：24—35岁
身高：男：170CM，女:160CM
视力：正常
语言：普通话标准
知识
1、教育：大专以上学历，管理、商业、营销、经济或相关专业优先
12
接受顾客的投诉
1、礼貌、耐心听取对方的意见或要求
2、及时解决对方的问题
3、尽量减少公司的损失
503说明书合订版本
CDA503系列产品使用说明-目录一、CDA503系列产品概述 (1)1.使用范围及条件 (1)2.特点 (1)3.外形尺寸 (1)4.运输、验收、存放、安装、维护 (1)二、CDA503电源单元 (1)1.主要功能及技术指标 (2)2.面板示意图 (2)1.主要功能及技术指标 (3)2.面板说明(面板功能按钮和指示灯的布置) (3)3.接线定义 (3)四、CDA503断路器控制单元 (4)1.主要功能及技术指标 (4)2.面板说明 (4)3.接线定义 (5)五、CDA503过流保护断路器控制单元 (5)1.主要技术指标 (5)2.主要功能 (5)3.面板说明 (5)4.LCD液晶显示及键盘操作 (6)5.接线定义7一、CDA503系列产品概述1.使用范围及条件海拔: 不大于2000m 环境温度: -25℃～+65℃相对湿度: 50%～95% 储存温度: -30℃～+85℃2、特点适用范围宽操作简便电机过流保护可远动控制合分闸操作抗震动、抗干扰能力强3.外形尺寸4.运输、验收、存放、安装、维护4.1 运输本产品必须包装运输, 不允许有强烈震动, 不允许倒置.4.2 验收(1)、开箱检查随机文件是否齐全....(2)、基本功能是否正常.注：随机文件..a.控制单元使用说明书一份.... b.合格证一份.4.3 存放产品应存放在室内清洁、干燥通风处, 存放时应小心, 谨防损坏.4.4 安全信息本产品为弱电设备, 但在现场安装、维护时, 附近有危险电压！本设备不能替代可见断开点, 工作时应遵循所在当地批准的安全规程；否则, 将因触高压导致严重人身伤亡.本手册并不能概括设备的安装、运行、维护等等的所有细节, 如有问题请与我公司联系.4.5安装步骤产品应安装在易操作的地方, 根据开关的位置的不同, 可安装在柱上的不同位置.安装步骤. （1）首先固定好控制单元.. （2）将外部接线接好.注: 本手册仅供参考, 如有更改, 恕不另行通知。
阿尔法拉夫 MIB 503 高效、紧凑的分离系统和模块的商业应用说明书
MIB 503 Module
The MIB 503 module is a complete solution, with the separation system and the collection tank built on a common skid, ready for plug-and-play installation.
MIB 503 is a flexible solution that can be delivered as a single separator, a separator with system components, or as a complete module. The design is extremely compact and lightweight, making it suitable to fit any engine room.
Benefits • Easy to install and start up – the system consists of a few
components and a few modules to secure an easy installation. • Easy to operate – the operation is limited to pressing the stop and start buttons. • High separation efficiency – an optimized design ensures the best possible separation efficiency from the bowl and disc stack. • Extremely lightweight design – the outer parts of the bowl are manufactured in surface-coated aluminium and most of the inner parts i.e. the disc stack, the bottom disc and the inlet cone are manufactured in a high grade polymer composite to reduce weight. • Small footprint, high flexibility – the systems and modules are compact and flexible to fit any engine room setup. • Long service intervals – due to the high reliability of the separator and system components. • Low operation cost – due to long service intervals and few spare parts used for the maintenance.
PMAC503M说明书1222
第 2 章 技术参数
2.1 PMAC503M1 参数说明
产品外貌
精度等级 漏电通道数 剩余电流动作值 ln( mA) 剩余电流预警值 lno(mA) 温度探测器报警范围 电压(V) 电流(A)
0.5 级 1路 100 ～1000 mA ，调节步长 1mA lno＝1/2 ln 测量范围： 0~150 ℃，动作范围：55~140℃ ，±1℃ 三相四线，相电压 AC220V，精确至小数点后两位 四位显示，根据数值大小切换小数点位，精确至小 数点后三位
正面(96x96mm)
侧面 83.5mm
安装方式为面板式安装，方便操作观察，开孔尺寸为 90mm x 90mm。
第 1 章 产品介绍
1.1 产品设计说明 PMAC503 M 系列电气火灾监控探测器 (以下简称探测器 )主 要应用于低压 配电系统 (380/220VAC) 的漏电保护 和基本电参数 的测量。该系列探测器在实现漏电及温度等保护功能之外，还提 供对三相电压、电流、功率与电度等电量参数的监控。提供基于 RS485 或 C-MBUS 的 Modbus-RTU 协议的通讯， 也可与 Profibus 协议转换模块连接，实现 Profibus 通信，集中监控，系统管理。 PMAC503 M 系列电气火灾监控探测器 (剩余电流、温度探 测防火监控器)分为 PMAC503M1 ，PMAC503M4 ，PMAC503M8 等三种类型，分别提供一路，四路和八路的漏电监控通道，满足 了各种保护现场的需求。 该系列探测器采用先进的微电子技术，利用电子元件测量控 制电流大小及温度，以毫秒的速度检测线路的漏电情况及配电箱 内的温度，当被控制线路漏电，或监测点温度过高而发热时，该 系统会发出报警信号直至自动切断电源， 提供的消防联动功能， 可远程切断故障点的电源，将故障排除在起火之前，彻底消除电 气火灾之隐患！ 支持 Modbus-RTU 协议的通讯， 使得用户可以方便的将探测 器进行组网管理，为实现系统自动化作了必要的准备，实时监控 现场的变化，同时为与 FAS 消防系统数据连接打下了基础。 PMAC503 M 系列电气火灾监控探测器是一个多功能的可靠 的测控装置，是彻底替代传统的空气开关、漏电开关的革命性产 品。适用于学校、商厦、工厂车间、集贸市场、工矿企业、国家
LG HT503THW DVD组合音响系统 使用说明书
SKIP(/)（跳跃）： 到下一个或上一个章节/音轨。
PROG./MEMO.（编辑/记忆）： 进入或退出 Program（编 程）菜单。 VOLUME (+/-)（音量）： 调节音箱音量。 CLEAR（清除）： 从 Program List（编程清单）里移除一 个音轨编号。 S-TITLE （字幕）： 在播放过程中，反复按 音频 选择所 需的字幕语言。 REPEAT（重复）： 重复章节/音轨/标题/全部。 HTSPK(TV家庭影院)： 按 TV家庭影院 来直接选择 AUX OPT。 VOCAL FADER (人声消除)： 您可以减弱不同音乐中歌手的 声音来使用卡拉 OK 功能。（MP3/WMA/CD/DD 等）（卡拉 OK 模式除外） 电视机控制按钮 ： 控制电视。（仅为 LG 电视机）
欢迎使用 DVD 接收机
目录 设置. . . . . . . . . . . . . . . . . . . . . . 4 连接本机. . . . . . . . . . . . . . . . . . . 5-6 遥控器. . . . . . . . . . . . . . . . . . . . . 7 主机. . . . . . . . . . . . . . . . . . . . . . 8 OSD 初始语言设置 . . . . . . . . . . . . . . . . 9 初始设置 区域代码. . . . . . . . . . . . . . . . 9 调整设置. . . . . . . . . . . . . . . . . . . 9-11 设置声音模式. . . . . . . . . . . . . . . . . . 11 显示光碟信息. . . . . . . . . . . . . . . . . . 12 播放光碟或文件. . . . . . . . . . . . . . . 12-14 查看图片文件. . . . . . . . . . . . . . . . . . 14 收听电台. . . . . . . . . . . . . . . . . . . . 15 5.1ch ez 设置. . . . . . . . . . . . . . . . . 15 收听来自 USB 设备的音乐. . . . . . . . . . . . 16 录制到您的 USB 设备. . . . . . . . . . . . . . 17 收听来自便携式播放器的音乐. . . . . . . . . . . 17 语言代码. . . . . . . . . . . . . . . . . . . . 18 地区代码. . . . . . . . . . . . . . . . . . . . 18 故障检修. . . . . . . . . . . . . . . . . . . . 19 可播放光碟类型. . . . . . . . . . . . . . . . . 20 规格. . . . . . . . . . . . . . . . . . . . . . 21
503A说明书
第一章概述一、用途JCQ—503A型静力载荷测试仪是专为土木工程质量检测部门研制的一种智能化多功能仪器。
它配合应变式力传感器或压力传感器、容栅式位移传感器、油泵流量控制器或油泵开关控制器、高压油泵、千斤顶等设备，可进行桩基及其它地基基础的静力载荷测试。
也可进行土木工程中的混凝土构件的结构性能及砌体轴压、抗剪等方面的测试。
二、特点本仪器具有一个荷载测试通道和四个位移测试通道，可直接显示各测试通道的荷载值kN、沉降值mm，而不需人工换算。
荷载通道可以配用小至数十公斤，大至数百吨的各种量程测力传感器和无吨位限制的压力传感器。
荷载通道允许测力传感器并联使用。
可以进行从楼板、碎石桩、天然地基直至数千吨大桩的静力载荷试验。
本仪器有两路各自独立的油泵控制输出，可以对试桩的加载、补载自动控制。
其一为开关量输出，用我所提供的油泵开关控制器直接控制高压油泵，适用于要求不太高的荷载试验。
其二为D/A输出，用来控制我所提供的油泵流量控制器。
该控制器的机芯采用的是进口变频器，可以自动调节高压油泵流量，能同时满足小吨位复合地基试验及大吨位桩基测试多台千斤顶并联工作时对流量精细调节的要求。
仪器与传感器、油泵间采用电缆连接，测试人员可远距离操作，既提高了工作效率，减轻了劳动强度，又大大提高了测试精度。
本仪器荷载通道使用的测力传感器，除具有灵敏度高，线性好、分辨率高、长期稳定性好的优点外，还具有优良的抗偏载和抗侧向力性能，可有效避免反力及加载装置倾斜对测试精度的影响。
沉降测试通道使用本所研制的容栅式位移传感器，其具有的高精度、大量程、无时漂、温漂等优点，完全满足了野外昼夜连续观测对时漂、温漂的严格要求。
仪器可工作于两种不同的工作方式——独立工作方式或联机工作方式独立工作方式工作时仪器内部带有的不断电时钟及大容量非易失数据存储器可对测试数据实现真正的无纸化记录。
仪器内部带有六种不同试验规范所对应的判稳标准（用于自动判稳），一种人工判稳标准（用于特殊场合下人工判稳）、两种快速加载方式（不判稳直接加下一级荷载）。
阿尔法拉维 MIB 503 模块 A 海洋与柴油应用分离模块说明书
IntroductionIn marine and diesel industry, customers struggle with low-quality fuels that have high content in particles and water. Operating on such fuels reduces the efficiency and the lifetime of the engine while increases the risk of repair costs.The MIB 503 Module is a complete separation solution from Alfa Laval that improves the reliability of the oil system and protects the main engine from serious wear and damages. Application•Marine gas oil•Marine diesel oil•Lubricating oilBenefits•Easy to install and start up•Easy to operate•Easy to maintain•High separation efficiency•Robust and reliable design•Low operating costs•Small footprintDesignThe module is available in a gas oil, diesel oil and a lube oil configuration.The gas oil configuration consists of the separator, the control cabinet, the pump, the flexible hoses and the alarm sensors. All of the components are mounted in an optimally designed frame that can fit even the smallest engine rooms.The MIB 503 separator consists of a solids-retaining bowl which can operate both as a purifier and a clarifier. Its unique drive technology is based on an electric motor mounted directly to the bowl, controlled by a frequency converter located in the control cabinet.The pump installed on the module is a positive displacement pump with constant flow and is connected to the separator through flexible hoses.To secure the correct operation of the separator, a pressure sensor and a level sensor are installed on the module. All functions and alarms are being handled from the control cabinet which has been designed for simplicity and ease of use.Distillate fuel may require heating in winter conditions, therefore configurations with heater are available.In lube oil configuration, the oil must reach the right temperature before the separation process starts. To accomplish that, a heater, a three way valve and a temperature sensor are included in the module.Scope of supply•MIB 503 Separator•Pump•Flexible hoses•Control cabinet•Sensors•Frame with collecting tankOptions•Heater•Three way valve•Wheel set•Drip tray•Emergency stop box•Trolley (only for gas oil)Working principleIn gas oil configuration, the fuel oil is being transferred directly from the pump to the separator. In configuration with heater, a heater and a three way valve are installed between the pump and the separator. The three way valve is being used to run the oil on recirculation until the correct separation temperature is reached.The separator starts up. When the separator reaches full speed, water is added to establish the appropriate water seal (applicable only for purifier setup). Subsequently, the pump starts up and oil is fed to the separator.The separation process takes place within the bowl. Due to the centrifugal forces, oil, water and particles are being separated based on their specific gravity. The heavy phases, water and particles, are moving to the periphery of the bowl while the light phase, oil, is moving towards the center of the bowl.Water is being drained continuously to the collecting tank of the module. The separated particles need to be cleaned periodically by hand. The clean oil is being pumped by a paring disc out of the separator and from there to the daily service fuel tank or the lube oil sump.A pressure sensor is installed in the oil outlet after the separator. The pressure sensor triggers an alarm during separation if the water seal interface is lost.A level sensor is installed on the collecting tank of the module. The level sensor triggers an alarm if the separator overflows.In configuration with heater, a temperature sensor is installed before the separator. The sensor triggers an alarm when temperature drops below setpoint.All the sensors are connected to the pump which will stop automatically if there is an alarm. In that case, the crew is informed by the alarm lamp in the control cabinet of the module.71.Feed inlet2.Pump3.Water for water seal (only for purifier)4.Separator5.Clean oil outlet6.Collecting tank7.Drain8.Control cabinet9.Emergency stop box (optional)10.Heater (for configuration with heater)11.Three way valve (for configuration with heater)12.Recirculation- Gas oil (1,5 – 6 cSt/40°C)Max. 1250/1000 l/h — Clarifier/Purifier - Marine diesel oil (13 cSt/40°C)Max. 1000 l/h- Lube oil Max. 300 l/hPower consumption separator andpumpMax. 0.7 kW (0.93 HP)EHM power7/14kW — LO/MGO-MDOFeed temperature Max. 95°CHeating media Hot water / electricityClean oil outlet G 1/2 inchDrain G 1/2 inchHeating media inlet1G 3/4 inchHeating media outlet1G 3/4 inch1 for CBM heater configurationSeparator bowl Surface coated aluminum. High-grade polymer compositeModule frame Structural steelGaskets and O-rings Fluorocarbon rubber (Viton®)CBM module (net/gross)82/114 kg (181/251 lbs) EHM module net/gross95/130 kg (209/287 lbs)Dimensional drawingGas oil configuration without heaterCBM heater configurationEHM heater configurationH21465 mm (4 ft 10 7/16 inch)W1640 mm (2 ft 1 3/16 inch)W2400 mm (1 ft 3 3/4 inch)W3525 mm (1 ft 8 11/16 inch)W4585 mm (1 ft 11 7/32 inch)W5760 mm (2 ft 5 15/16 inch)W6770 mm (2 ft 6 11/16 inch)This document and its contents are subject to copyrights and other intellectual property rights owned by Alfa Laval Corporate AB. No part of this document may be copied, re-produced or transmitted in any form or by any means, or for any purpose, without Alfa Laval Corporate AB’s prior express written permission. Information and services provided in this document are made as a benefit and service to the user, and no representations or warranties are made about the accuracy or suitability of this information and these services for any purpose. All rights are reserved.200000577-3-EN-GB© Alfa Laval Corporate ABHow to contact Alfa LavalUp-to-date Alfa Laval contact details for all countries are always availableon our website at 。
帕顿电子平行浪涌保护器503P和503PC用户手册.pdf说明书
USER MANUALSALES OFFICE (301) 975-1000TECHNICAL SUPPORT (301) 975-1007Part# 07M503P-C Doc# 074201U Rev. D Revised 1/21/08An ISO-9001Certified Company1.0 WARRANTY INFORMATIONPatton Electronics warrants all Model 503P and 503PC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.2.0 SERVICE AND SUPPORT1.2 SERVICEAll warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Support: (301) 975-1007; ; or,******************.Notice: Packages received without an RMA number will not be accepted.Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 503P and 503C. Technical Service hours: 8AM to 5PM EST, Monday through Friday.1.3 CE NOTICEThe CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Support.12.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of the unit, contact Patton Electronics Technical Support: (301) 975-1007; ; or,******************.2.1 PRODUCT DESCRIPTIONThe Patton Model 503P and 503PC guard PC parallel interfaces against data loss and damage due to transient surges. These units employ a solid state circuit using Silicon Avalanche Diodes, and can handle repeated surges up to 1500 Watts. The Model 503P connects directly between the DB-25 parallel port of a PC or workstation and the parallel printer cable. The Model 503PC connects to the parallel printer cable, and then plugs directly into the 36-pin Centronics®printer port. Both units divert surge energy to chassis ground through the metal connector shell. For complete protection of your parallel line, we recommend that a Model 503P and 503PC be used together, one at each end of the line.Warning:These products will not provide complete protection should your equipment be subject to a direct lightning hit.2.2SURGE PROTECTION BENEFITSThe method of surge protection used in the 503P and 503PC adds four benefits to your syste.1. High Surge Capability. The 503P and 503PCdissipate up to 1.5 kwatts for up to 1 mes.2.Quick Response. The 503P and 503PC feature a responsetime of 500 nsec, 503PC clamps at +8V and -3V the 503Pclamps to 6.8V3.Low Impedance. Connect the 503P directly to RS-232 portswith minimal load to your system — about the same as agender changer.4.“Fail Safe” Design. Unlike some other surge suppressors, the503P fails short to ground should your system experience anextreme transient or severe current overload. Therefore, Iifthe unit fails, data and surges are diverted to ground instead ofback into your equipment.23.0 INSTALLATIONPatton's Model 503P and 503PC units are simple to install, and require no user configuration. Follow these installation steps.1. Turn off your PC/printer’s power and disconnect the powercord(s) from the wall outlet(s).2. Unplug (disconnect) the existing connection between theparallel cable and your PC/printer’s parallel port(s).3. Install the Model 503P between the parallel cable and the DB-25 parallel port. Install the Model 503PC between the parallelcable and the Centronics®-36 connector of your parallelprinter. For best results, both protectors should be used–oneat each end of the cable.3APPENDIX APATTON MODEL 503P AND 503C SPECIFICATIONSLInes Protected: Model 503P protects 24 lines on the DB-25parallel interface; Model 503PC protects 34lines on the 36-pin Centronics®interface. Peak PowerDissipation: 1500 Watts for up to 1 msecClamp Voltage: 503P6.8 V; 503PC +8, -3VGrounding: Surge energy diverted to chassis groundthrough metal D-shell (or 36-pinCentronics®) connectors. Alternate groundconnection for Model 503P provided byexternal grounding wire.4NOTES__________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________5NOTES__________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________6Dear Valued Customer,Thank you for purchasing Patton Electronics products! We do appreciate your business. I trust that you find this user manual helpful.We manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, fiber optic modems, interface converters, baluns, electronic data switches, data-line surge protectors, multiplexers, transceivers, hubs, print servers and much more. We producethese products at our Gaithersburg, MD, USA, facility, and can custom manufacture products for your unique needs.We would like to hear from you. Please contact us in any of the following ways to tell us how you like this product and how we can meet your product needs today and in the future.Web: Sales E-mail: ****************Support E-mail: ******************Phone - Sales (301) 975-1000Phone - Support (301) 975-1007Fax: (301) 869-9293Mail: Patton Electronics Company7622 Rickenbacker DriveGaithersburg, MD 20879 USAWe are committed to a quality product at a quality price. Patton Electronics is ISO 9001 certified. We meet and exceed the highest standards in the industry (CE, UL, etc.).Please contact us and let us know how we may provide you with the answers to your needs.Thank you.Burton A.PattonVice PresidentP.S. Please tell us where you purchased this product._________________________________________________________ __________________________________________________________________________________________________________________ _________________________________________________________ _________________________________________________________。
Statox 503控制模块说明书
Getting started with the Statox 503 Control ModuleSafety notes▪Read and observe this manual prior to installation and start-up.▪The Statox 503 Control Module must not be operated out of the specified ambient conditions (see Technical Data). In particular, it must not be operated in classified areas!▪The Statox 503 Control Module must be operated, maintained and repaired exclusively by trained and authorized personnel. Use only Compur Monitors original parts for repair and maintenance.▪Do not connect the module directly to mains!▪Do not modify the product. Do not use if damaged or incomplete.▪When installing this product observe all local standards and regulations.▪Disregarding of the above instructions may cause danger to people and property.Product descriptionThe Statox 503 Control Module operates together with 4-20 mA transmitters and the complete range of Statox 501 sensor heads. It provides a 4-20 mA analog output, 3 alarm relays, a display and LEDs for visible alarms. It can also be operated as Common Alarm Module collecting alarm signals via communication bus.Set with 2 bus adapters, mandatoryrequired for each module in busoperation, art.# 557002Connection set for bus adapter(Bus plug left and right),optional, art.# 557003DIN rail TS 35Figure 1: Requirements for bus operation, sample installationControl Module, Art.# 555500Control Module, Art.# 555500, configured as Common Alarm ModulePowersupply24 VDCThis document is for your first information!Detailed manuals in several languages are available onour homepage Figure 2: Mounting to DIN railMounting and DismountingThe Control Modules can be operated without bus adapter, in this case they are clipped onto the DIN rail as shown in figure 2. In this case every single module must be powered with 24 VDC.Connecting to power supplyDo not connect the module directly to mains! Do not short circuit terminals! Both can destroy the module! Observe 24 ± 2 VDC power supply tolerance!There are two options connecting the 24 VDC power supply: via bus plug to the communication bus or directly to the relevant Statox 503 Control Module terminal. In both cases all subsequent modules are automatically connected to the power supply via bus. The terminals are rated to accept a max. diameter of 2,5 mm 2.After connection to power, the green LED is on. During the starting process the module displays the firmware version, then the actual measuring program, then “PLEASE WAIT”.!1314 15 16+24 VDC17 18 19 20421 0 V +24 VDC12!Figure 3: Dismounting from DIN railFigure 4: Connecting the power supplySFMain menu structurePush ◄- and ► -button together for 2 s. Select each digit of the password 1994 with the arrow keys and confirm with ENTER. Correct false inputs with the R key.General time-out: if no button is pushed within 30 seconds, the module returns to measuring mode.Selecting the measuring programPrior to connecting a sensor head the first step is always to select the appropriate program. Thismust be done before the sensor head is connected, otherwise the sensor can be damaged! If a new program is selected, the default alarm settings and relay configurations according to the program listing are valid and the calibration data for the sensor heads for combustible gases, type HRC, ARE, LCIR, MCIR, CO 2 and PID will be lost. A new calibration is necessary (the display shows CALIB. REQUIRED).!Figure 5: Main menu structureIn this menu the appropriate measuring program can be selected. The program defines the target gas, the measuring range, the concentration window for span gas and the ex - works settings of the relays. See an overview of all available programs in the program listing enclosed with each module.Starting with menu SEL PROG the time-out is not active. In this menu a new program can be selected with the arrow keys.After STORE the new program is displayed, push ENTER to start the new program.Figure 6: Program selection diagramMEASURING MODEnCalibrationAfter connecting the sensor heads type Statox 501 HRC, ARE, LCIR, MCIR, CO 2 and PID to the Control Module a calibration is mandatory. Exception: a line calibration has been done ex works. The test gas concentration must be within the permitted range, see program listing.RFigure 7: Calibration menu diagramChange menu itemFlashing, searching zero point.Flashing, turn test gas on.Displayed if zero point is adjusted.Signal is stable, turn test gas off.Input: gas concentration (value) Start zeroingInput: reference factor (value) Correction with RConfirmation with ENTER Displayed for 2 s after successful calibration.Actual measuring value and unitSpan gas has been recognized.Programming the alarm relaysIn this menu you can set parameters of the alarm relays A1 and A2:▪Alarm thresholds▪High or low alarm▪Latching (HOLD) or not latching (AUTO RESET)▪Coil active (ACTIVE) or not active (PASSIVE) in case of alarmFigure 8: Alarm relay settingCurrent output in Service ModeIf you operate the module as a SIL device EN 50402 or IEC 61508, 2 mA output in theservice mode is mandatory.Changing the operation mode - Control Module or Common Alarm ModuleReading the bridge voltageSwitching the sensor power supply offNo changeof operationmodeMEASURING MODEChange of operation mode: start-upIn this menu the operation mode of theStatox 503 can be selected.The ex - works setting of the Statox 503is Control Module.Please find detailed information forrunning the Statox 503 in CommonAlarm mode in the detailed manual onour homepage !Active in the programs for Statox 501HRC, ARE, LCIR, MCIR, CO2 and PIDsensor heads.Displays either the actual bridge voltageor the actual concentration.Time-out 60 minutes!Active in the programs for Statox 501HRC, ARE, LCIR, MCIR, CO2 and PIDsensor heads.It disconnects the sensor head for servicepurposes.In this menu the time-out is not active!MEASURING MODEConnecting the sensor headThe sensor head power supply must be OFF before connecting a sensor head!Short circuits on the terminals or selection of a wrong program may destroy the sensor head.!Figure 10: Connections sensor heads Statox 501/Sand Statox 505/5065 6 7 8 9 10 11 12 5 6 7 89 10 11 123 4 5 o. 4 1 o. 2Figure 12: Connections sensor heads Statox 501 HRC, ARE, LCIR, MCIR, CO 2 and PID2 wire mode9 10 11 12INP 5 6 78 910 1112I INP5 6 783 wire mode Statox 505/506Figure 11: Connections sensor head Statox 501 Infratox /Infratox HS5 wire mode 3 wire modeThe sensor heads Statox 501/S and Statox 505/506 for toxic gases and oxygen are operated as 4 – 20 mA transmitters in 2 wire mode. The Statox 505/506 sensor heads can alternatively be operated in 3 wire mode. This way you can differentiate between service mode (2 mA) and system failure (0 mA). The standard application of sensor heads running in voltage mode is 3 wire mode. Starting with 750 m length of cable, Compur recommends to generally operate in the 5 wire mode. The two additional “sense” lines measure the sensor supply voltage and compensate for voltage drops due to long cable or extreme temperatures.The sensor head Statox 501 Infratox/ Infratox HS for combustible gases and CO 2 requires 3 or 4 wires (2 ground wires) for proper operation. 9 10 11 12 21 22 23 24The sensor heads Statox 501/S and Statox 505/506must be operated in connection with an intrinsically safe repeater if they are installed in classified area, zone 1 or zone 2. Detailed information regarding the operation with an intrinsically safe repeater can be found in the manuals of the corresponding sensor heads. Connect the shield of the sensor head cable to the grounding bar. Both, grounding bar and DIN Rail must be grounded.Please find more information for connecting other sensor heads in the detailed manual on !Control Module – Status diagramInput from Sensor or transmitter SystemStatusCurrentoutputBussignalDisplayLEDs RelaysA1 A2 S ON A1 1)A2 1)SF4-20 mA orbridge voltageNormal 4 – 20 mA --- Measuring value OFF OFF OFF ON active active active 4-20 mA orbridge voltageAlarm 1 4 - 20 mA A1 Measuring value ON OFF 2)OFF ON passive active 2)active 4-20 mA orbridge voltageAlarm 2 4 - 20 mA A2 Measuring value OFF 2)ON OFF ON active 2)passive active22 mA or mV over range Over Range 22 mA 2)Full scaleflashing2) 2) OFF ON 2) 2) active0 mA orError statusSystem failure 0 mA SF Error code OFF OFF ON ON active active passive2 mA or Service ModeServiceMode 3)2 mA 1)---SERVICE MODEor menuOFF OFF flashing ON active active active1)Ex-works setting, can be changed by user.2)Depending on actual alarm status.3)Priority ranking: Service Mode > SF > (A1 / A2 / Over range)Common Alarm Module – Status diagramBus input SystemstatusCurrentoutputDisplayLEDs 4)Relays 4)A1 A2 S ON A1 1)A2 1)SF--- Normal 4 mA COMMONOKOFF OFF OFF ON active active activeA1 Alarm 1 12 mA COMMONALARM 1ON OFF OFF ON passive active activeA2 Alarm 2 16 mA COMMONALARM 2OFF ON OFF ON active passive activeSF Systemfailure 0 mACOMMONFAILUREOFF OFF ON ON active active passive--- Service 4) 2 mA 1)Menu OFF OFF flashing ON active active active1)Ex-works setting, can be changed by user.4)The listed LED and relay status describes an isolated alarm event. In case of multiple alarm eventscombinations are possible.The priority ranking for display and current output is: Service Mode > A2 > A1 > SFError messagesIn case the display stays dark, check the polarity and the voltage of the power supply. The internal fuse may be damaged. In any case critical errors lead to system failure.Display Nature Description MeasuresERROR 1 Critical Short circuit in the sensor head cable. Check wiring and connections. Push R button.ERROR 2 Critical Cable interruption (in current mode) or aconnected sensor head transmits 0 mA.Check wiring and connections.Automatic reset after error correction.ERROR 3 Critical Cable too long(only in voltage mode)Check wiring and connections.Check selected program.Connect sensor head and push R button. Eventuallychange to 5 wire installation.ERROR 4 Critical Sensor power supply voltagecannot be controlled.Push the R button. If error persists contact yourCompur service partner.ERROR 5 Critical Cable interruption (only in voltage mode)or sensor defective.As a precaution the sensor has beenpowered off.Jumper mounted in 3 wire mode?Check connections, connect sensor head and pushReset button to restart.Check power supply and voltage.Eventually change the sensor.ERROR 6NoncriticalZero not found during time limit.Check connections.If gas is present use zero gas.Push the Enter button and try again.The old zero value remains valid.ERROR 7NoncriticalZero shift out of specifications.Check if gas is present.Push the Enter button and try again.The old zero value remains valid.Eventually replace the sensor.ERROR 8NoncriticalSensor sensitivity too low.No gas or no plateau found duringcalibration.Check if gas is on and gas adapter tightly connected.Push ENTER and try again.The old gain value remains valid.Eventually replace the sensor.ERROR 9-12 Critical Hardware error Contact your Compur service partner.ERROR 13 Critical Output current out of specifications. Check connections.Terminals 3/4: evaluation unit or jumper mounted? Jumper mounted in 3 wire mode?If error persists contact your Compur service partner.ERROR 14-15 Critical Hardware error Contact your Compur service partner.GAS CONC ERRORNonCriticalThe result ofgas concentration x response factoris out of range.Check gas concentration and response factor entry.Eventually select another span gas concentration.Push the Enter button and try again.The old gain value remains valid.Eventually replace the sensor.CALIB. FAILEDNonCriticalThe result ofsensor signalgas concentration response factoris too low.Check gas concentration and response factor entry.Eventually select higher span gas concentration.Push the Enter button and try again.The old gain value remains valid.Eventually replace the sensor.CALIB. REQUIREDNoncriticalNo valid calibration data, measurementwith default sensor parameters (at start-up or after change of program).Blanket with ENTER. “NO VALID CAL.DATA“ appearsfor 5 s. Calibrate with span gas!Technical DataProduct name: Statox 503 Control ModuleManufacturer: COMPUR Monitors GmbH & Co. KG, D-81539 Munich Power supply: 24 ± 2 VDC, max. 200 mA Power consumption: max. 5 WCurrent rating: max. 8 A on communication bus Operating temperature: -10° C to +60° C (14°F to 140°F) Storage temperature: -30°C to +60°C (-22°F to 140°F) Pressure: 900 to 1100 hPaHumidity: 0% to 99% r. H. (non-condensing) Display: 2 x 8 digit LCD with backlightHousing: Polyamide, protection class IP 20Connections: 24 terminals, can take cable diameters up to 2.5 mm 2 Relays: 2 x alarm, 1 x system failure Relays contact: 250 VAC, 8Amin. burden ≥ 12V, 10 mA (contact material: silver-nickel 90/10) System failure relay: In normal operation active (coil active), make contact (NO) is closed Analog output: 0 mA in case of system failure2 or 4 mA in service mode, programmable4 - 20 mA in measuring mode, tolerance ± 2 % at -10°C to + 50°C22 mA at over range Max. Burdon: 700 Ohm Installation: 35 mm DIN-Rail CE-Marking: EN 61326-1:2013Functional safety: SIL 2 capable according to IEC 61508 Dimension: 45 x 103 x 115 mm (1.77 x 4.06 x 4.52 “) Weight: 275 gSpecifications are subject to change without notice, and are provided only for comparison of products. The conditions, under which our products are used, are beyond our control. Therefore, the user must fully test our products and/or information to determine suitability for any intended use, application, condition or situation. All information is given without warranty or guarantee. Compur Monitors disclaims any liability, negligence or otherwise, incurred in connection with the use of the products and information. Any statement or recommendation not contained herein is unauthorized and shall not bind Compur Monitors. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or device or its use. No license is implied or in fact granted under the claims of any patent. Instruments are manufactured by Compur Monitors GmbH & Co. KG, Munich. The General Conditions of Supply and Service of Compur Monitors GmbH & Co. KG are applicable.45 mm (1.77 ")103 m m (4.06 ")。
ND503 说明书
I
ND503功能特色
■ 全面强大词典功能
※ 内含数部版权词典、多本常用词典、五门外国语词典， 还可登陆诺亚教育网（），下载数百部网络专 业词典。 ※ 全面内置诺亚舟公司独创“UD-STECH”跨辞典联合搜 索引擎技术，真正实现一键跳查，联合多本词典关联查找，潇洒 遨游词海间。
36 36 36 36 37 37 37 38 40 41 41 41 41 41 42 44 44 44
十 产品规格........................................ 45 十一 售后服务...................................... 45 附录A 附录B 附录C 附录D 简易故障排除方法. ............................ 产品常见问题. ................................ 五笔字型键盘字根总图. ........................ 环保使用说明. ................................ 46 47 49 50
■ 娱乐助理工具各项全能
※ 娱乐：高音质的MP3播放、图书文本阅读，我的博客随意 写，同时拥有强大的资料浏览功能，休闲的益智游戏。 ※ 助理：名片电话、备忘记事、学习课表、日程管理、还有 计算、时间、闹钟等丰富的个人数字助理功能，让您忙碌的学习或 工作井井有条，是您随身携带的移动“小秘书”。 ※ 工具：集资源管理、偏好设置、产品信息等于一体，整机 功能操作简单、便捷，让您使用起来得心应手。
Ԩࠅິዂ૰ᇀփ༵ืĂྜׂႠీLjഽࣅĂᆫࣅׂࠀ ీLjຫກዐፕถᅜᇨዃాඹྺጚLjᅺُԍାܔԨຫ ກዐ׃ຎాڦඹႜ߀ܸփᇨံཚኪڦ૧ăک౷ჱঞ ᇣྪ! ူሜֱੂፌႎӲԨຫກă ԨׂాዃຕጨଙಕٷLjᅙঢ়ࡗԨࠅິ߾ፕටᇵڦጮဦอࢃ तၯܔLjසධᆶኮتLjݑ൩ଌժኸኟă ැၙକ߸ܠሺኵޜခLj൩࠲ጀԨࠅິྪበă
503A说明书
第一章概述一、用途JCQ—503A型静力载荷测试仪是专为土木工程质量检测部门研制的一种智能化多功能仪器。
它配合应变式力传感器或压力传感器、容栅式位移传感器、油泵流量控制器或油泵开关控制器、高压油泵、千斤顶等设备，可进行桩基及其它地基基础的静力载荷测试。
也可进行土木工程中的混凝土构件的结构性能及砌体轴压、抗剪等方面的测试。
二、特点本仪器具有一个荷载测试通道和四个位移测试通道，可直接显示各测试通道的荷载值kN、沉降值mm，而不需人工换算。
荷载通道可以配用小至数十公斤，大至数百吨的各种量程测力传感器和无吨位限制的压力传感器。
荷载通道允许测力传感器并联使用。
可以进行从楼板、碎石桩、天然地基直至数千吨大桩的静力载荷试验。
本仪器有两路各自独立的油泵控制输出，可以对试桩的加载、补载自动控制。
其一为开关量输出，用我所提供的油泵开关控制器直接控制高压油泵，适用于要求不太高的荷载试验。
其二为D/A输出，用来控制我所提供的油泵流量控制器。
该控制器的机芯采用的是进口变频器，可以自动调节高压油泵流量，能同时满足小吨位复合地基试验及大吨位桩基测试多台千斤顶并联工作时对流量精细调节的要求。
仪器与传感器、油泵间采用电缆连接，测试人员可远距离操作，既提高了工作效率，减轻了劳动强度，又大大提高了测试精度。
本仪器荷载通道使用的测力传感器，除具有灵敏度高，线性好、分辨率高、长期稳定性好的优点外，还具有优良的抗偏载和抗侧向力性能，可有效避免反力及加载装置倾斜对测试精度的影响。
沉降测试通道使用本所研制的容栅式位移传感器，其具有的高精度、大量程、无时漂、温漂等优点，完全满足了野外昼夜连续观测对时漂、温漂的严格要求。
仪器可工作于两种不同的工作方式——独立工作方式或联机工作方式独立工作方式工作时仪器内部带有的不断电时钟及大容量非易失数据存储器可对测试数据实现真正的无纸化记录。
仪器内部带有六种不同试验规范所对应的判稳标准（用于自动判稳），一种人工判稳标准（用于特殊场合下人工判稳）、两种快速加载方式（不判稳直接加下一级荷载）。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CDA503系列产品使用说明-目录一、CDA503系列产品概述 (1)1、使用范围及条件 (1)2、特点 (1)3、外形尺寸 (1)4、运输、验收、存放、安装、维护 (1)二、CDA503电源单元 (1)1、主要功能及技术指标 (2)2、面板示意图 (2)3、接线定义 (2)三、CDA503负荷开关控制单元 (2)1、主要功能及技术指标 (3)2、面板说明(面板功能按钮和指示灯的布置) (3)3、接线定义 (3)四、CDA503断路器控制单元 (4)1、主要功能及技术指标 (4)2、面板说明 (4)3、接线定义 (5)五、CDA503过流保护断路器控制单元 (5)1、主要技术指标 (5)2、主要功能 (5)3、面板说明 (5)4、LCD液晶显示及键盘操作 (6)5、接线定义 (7)1、使用范围及条件海拔：不大于2000m 环境温度： -25℃～+65℃相对湿度： 50%～95% 储存温度： -30℃～+85℃2、特点适用范围宽操作简便电机过流保护可远动控制合分闸操作抗震动、抗干扰能力强3、外形尺寸4、运输、验收、存放、安装、维护4.1 运输本产品必须包装运输，不允许有强烈震动，不允许倒置.4.2 验收(1)、开箱检查随机文件是否齐全. (2)、基本功能是否正常.注：随机文件： a. 控制单元使用说明书一份. b. 合格证一份.4.3 存放产品应存放在室内清洁、干燥通风处，存放时应小心，谨防损坏.4.4 安全信息本产品为弱电设备，但在现场安装、维护时，附近有危险电压！本设备不能替代可见断开点，工作时应遵循所在当地批准的安全规程；否则，将因触高压导致严重人身伤亡.本手册并不能概括设备的安装、运行、维护等等的所有细节，如有问题请与我公司联系.4.5安装步骤产品应安装在易操作的地方，根据开关的位置的不同，可安装在柱上的不同位置.安装步骤：（1）首先固定好控制单元. （2）将外部接线接好.注：本手册仅供参考，如有更改，恕不另行通知。
● CDA503电源单元采用恒流．恒压．涓流三段式充电模式充电，充电完成后自动转换成涓流式充电方式． ● CDA503电源单元4小时内对两节10安时12V 串联的电池完成充电．● CDA503电源单元根据环境温度范围内变化时调整充电电压，以保护电池，延长电池的使用寿命． ● 放电终止电压为22V ，一旦电池过放电则强行关断电池供电．● CDA503电源单元的工作电源： 交流电源工作范围：AC220V ±20% 直流电源工作范围：DC180V~~290V ● 功率： 恒流充电时 不大于50W 恒压、涓流时 不大于10W ● 提供一组低气压常开触点输出，触点容量为DC24V ，1.5A.●面板上配有LED 充电指示以及10A 保险丝，电池测压孔，蓄电池开关各一组．备注：电源单元有带低压和不带低气压的两种，选型时请说明. 2、面板示意图3、接线定义另：电源单元（不带低气压）接线图：其中最左侧1-5改为：电源输出正，6-10改为电源输出负；其他同上。
电源单元（带低气压）接线图●过流检测：如果电机堵转负荷开关控制单元会立即停止，并有报警指示灯提示.同时禁止合闸分闸操作.●自动跟踪：开关合分闸前，负荷开关控制单元自动检测电机状态，如果电机不到位自动复位到初始状态.●最长时间保护：如果辅助开关不到位，负荷开关控制单元长时间检测不到位置信号会导致电机超行程运转或堵转.设定最长时间10S可以保护电机，到达规定时间后立即停止.●控制选择：可以选择电动、手动、远动操作. 接地保护：接地功能启用时，禁止合闸分闸操作.●低气压保护：低气压功能启用时，禁止合闸分闸操作.●报警指示灯提示：根据有规律的闪烁次数，识别故障.只要报警指示灯在有规律的闪烁则不能进行合闸操作.●面板上有电动，手动，远动开关控制，并有合分闸按钮及合分闸指示灯指示，接地指示灯指示．●远方合分闸触点输入各一组，远控和近控分合闸，回路电流不超过10mA．●具有防跳功能扩展远程开关控制输出一组.●转接接地开关输出一开，转接负荷开关状态输出1开1闭．控制器具有抗电磁干扰能力，防止误动作.●工作电源： DC18V--36V 功耗：≤3W●输出无源接点容量： 24VDC﹤15A（380VAC﹤30A）开入信号电压范围： DC18V--36V●电源开关：“启动”使控制单元得电正常工作，“关闭”使控制单元断电不工作.●电动/手动/远动按钮：在“电动”状态，只能按面板上的合闸、分闸按钮进行开关合闸、分闸操作（强合分开关除外）.●合闸按钮：按下“合闸”按钮后，开关进行合闸. 分闸按钮：按下“分闸”按钮后，开关进行分闸.●接地指示灯：灯亮时，表示当前开关在接地位置，此时禁止一切对开关的合分闸操作.●报警指示灯：当控制单元检测到有信号不对、电机过流、低气压、操作不成功时，报警指示灯就开始闪烁.每周期闪烁结束，间隔1.5秒若故障依然存在则再次开始闪烁.闪烁次数对应相应的故障原因.每周期闪烁1次：检测到电机过流. 每周期闪烁3次：检测到电机辅助开关信号不对.每周期闪烁4次：检测到开关辅助开关信号不对. 每周期闪烁5次：检测到合闸没合上.每周期闪烁6次：检测到分闸没分开. 每周期闪烁7次：检测到有低气压信号.每周期闪烁8次：检测到电机复位自动跟踪到开关分位置没有完成.每周期闪烁9次：检测到电机复位自动跟踪到开关合位置没有完成.●合闸指示灯：灯亮时，表示当前开关在合闸位置. 分闸指示灯：灯亮时，表示当前开关在分闸位置.3、接线定义气体柜负荷开关接线图固体柜负荷开关接线图1、主要功能及技术指标●过流检测：如果电机堵转断路器控制单元会立即停止，并有报警指示灯提示.同时禁止合闸分闸操作.●储能最长时间保护：如果辅助开关不到位，断路器控制单元长时间检测不到位置信号会导致电机超行程运转或堵转.设定最长时间15S可以保护电机，到达规定时间后立即停止. 控制选择：可以选择电动、手动、远动操作.●与继电保护配合：可以与继电保护设备配合，实现保护的合闸分闸操作.●接地保护：接地功能启用时，禁止合闸分闸操作. 低气压保护：低气压功能启用时，禁止合闸分闸操作.●面板上有电动，手动，远动开关控制，并有合分闸按钮及合分闸指示灯指示，储能及接地指示灯指示．●远方合分闸触点输入各一组，远控和近控分合闸，回路电流不超过10mA．具有防跳功能●扩展远程开关控制输出一组. 转接接地开关输出一开，转接断路器状态输出1开1闭，转接储能及隔离刀触点一组．●报警指示灯提示：根据有规律的闪烁次数，识别故障.只要报警指示灯在有规律的闪烁则不能进行合闸操作.●控制器具有抗电磁干扰能力，防止误动作. 工作电源： DC18V--36V●功耗：≤3W输出无源接点容量：24VDC﹤15A（380VAC﹤30A）开入信号电压范围： DC18V--36V2、面板说明●电源开关：“启动”使控制单元得电正常工作，“关闭”使控制单元断电不工作.●电动/手动/远动按钮：在“电动”状态，只能按面板上的合闸、分闸按钮进行开关合闸、分闸操作（强合分开关除外）.●保护投入/退出切换按钮：在“投入”状态，可以响应继电保护设备进行的保护合分闸操作，在“退出”状态，则不响应.●合闸按钮：按下“合闸”按钮后，开关进行合闸. 分闸按钮：按下“分闸”按钮后，开关进行分闸.●储能指示灯：灯亮表明储能已到位，可以进行开关合闸操作.灯灭表明未储能或辅助开关信号未检测到.●接地指示灯：灯亮时，表示当前开关在接地位置，此时禁止一切对开关的合分闸操作.●报警指示灯：当控制单元检测到有信号不对、电机过流、低气压、操作不成功时，报警指示灯就开始闪烁.每周期闪烁结束，间隔1.5秒若故障依然存在则再次开始闪烁.闪烁次数对应相应的故障原因.每周期闪烁1次：检测到电机过流. 每周期闪烁2次：检测到开关未储能.每周期闪烁4次：检测到开关辅助开关信号不对. 每周期闪烁5次：检测到合闸没合上.每周期闪烁6次：检测到分闸没分开. 每周期闪烁7次：检测到有低气压信号.●合闸指示灯：灯亮时，表示当前开关在合闸位置. 分闸指示灯：灯亮时，表示当前开关在分闸位置.3、接线定义1、主要技术指标 ● 工作电源： DC24 ±10%V CT 变比：*：5（* 可以选择） 功耗：≤3W 保护精度（电流）：±5% ● 过流保护定值：10～3000A （步长 1A ） 延时时间：0～99.99S （步长 0.01S ） ● 零序电流保护定值：0.5～300A （步长 0.1A ） 零序延时：0～99.99S （步长 0.01s ） ●输出无源接点容量：24VDC ﹤15A （380VAC ﹤30A ） 开入信号电压范围：DC18V--36V2、主要功能 ● 定时限保护功能 定时限保护方式按照传统的三段式电流保护方式（速断、限时速断、过流）进行. ● 重合闸功能 可以按照事先整定的次数进行多次重合闸功能.● 手合遇故障功能 手动合闸时，出现故障，控制器立即断开闭锁不进行重合闸.● 储能最长时间保护功能 如果辅助开关不到位，断路器控制单元长时间检测不到位置信号会导致电机超行程运转或堵转.设定最 长时间15S 可以保护电机，到达规定时间后立即停止. ● 控制选择功能 可以选择电动、手动、远动操作. ● 低气压保护功能 低气压功能启用时，禁止合闸分闸操作.● 报警指示灯提示功能 根据有规律的闪烁次数，识别故障.只要报警指示灯在有规律的闪烁则不能进行合闸操作. ● 液晶显示功能 为产品的整定、设置、查看提供直观的各种参数. ● 事件记录功能 可记录最近的255条事件. ● 记忆功能各种设定的数据自动进入记忆单元，10年不丢失.● 遥信量检测功能 可检测开关的当前状态，分、合闸位置及储能状态.● 显示自动保护功能 在没有按键按下的情况下，为保护液晶，2分钟后显示自动关闭，按下任一键恢复显示到主页面. ●零序保护功能 当需要投入零序保护功能的时候，请在该系列菜单中将零序报警功能和零序动作功能设置为开，并设定需要的零序电流的大小以及需要的零序保护延时.如果不需要投入该功能，请在该系列菜单中将零序报警功能和零序动作功能设置为关.若单独启用零序报警功能，只需将零序报警功能设置为开，遇故障后报警但不闭锁. 3、面板说明● 电源开关：“启动”使保护单元得电正常工作，“关闭”使保护单元断电不工作. ● 电动/手动/远动按钮：在“电动”状态，只能按面板上的合闸、分闸按钮进行开关合闸、分闸操作（强合分开关除外）；在“远动”状态，控制器可通过外接合分按钮进断路器控制单元接线图行分合闸操作.在“手动”状态时，开关可进行机械合分. ● 保护投入/退出: 在控制器保护投入状态时，可进行保护动作.● 合闸按钮：按下“合闸”按钮后，开关进行合闸.(控制器处于电动状态) ● 分闸按钮：按下“分闸”按钮后，开关进行分闸.(控制器处于电动状态) ● 解锁按钮：三段保护功能，闭锁后，按下“解锁”按钮后，功能解锁.● 储能指示灯：灯亮表明储能已到位，可以进行开关合闸操作.灯灭表明未储能或辅助开关信号未检测到.●报警指示灯：当控制单元检测到有信号不对、电机过流、低气压、操作不成功时，报警指示灯就开始闪烁.每周期闪烁结束，间隔1.5秒若故障依然存在则再次开始闪烁.闪烁次数对应相应的故障原因.每周期闪烁1次：检测到电机过流. 每周期闪烁2次：检测到开关未储能. 每周期闪烁4次：检测到开关辅助开关信号不对. 每周期闪烁5次：检测到合闸未到位. 每周期闪烁6次：检测到分闸未到位. 每周期闪烁7次：检测到有低气压信号.●合闸指示灯：灯亮时，表示当前开关在合闸位置. 分闸指示灯：灯亮时，表示当前开关在分闸位置.4、LCD 液晶显示及键盘操作上电显示页：测量值监视功能Ia 、Ib 、Ic 是三相电流值，Io 是零序电流值。