真空泵标准汇总

真空泵标准汇总
标准编号标准中文名称标准英文名称
GB/T13930-1992 水环真空泵和水环压缩Methods for the measureme nt of volume flow
机气量测定方法of gas ofwater-ring vacuum pump and compressor
GB/T13929-1992 水环真空泵和水环压缩Methods of testing for water -ring vacuum pumps
机试验方法and compressors
JB/T5971-1992(2005复审) 单级多旋片式真空泵
JB/T7266-1994 容积真空泵性能测量方法
JB/T7255-1994(2005复审) 水环真空泵和水环压缩机
JB/T8472.1-1996 蒸汽流真空泵性能测定第一部分:抽气速率(体积流率)的测定
JB/T8472.2-1996 蒸汽流真空泵性能测定第二部分:临界前级压力的测定
JB/T1246-1997 滑阀真空泵
JB/T9808.1-1999 奶用真空泵技术条件
JB/T9808.2-1999 奶用真空泵试验方法
JB/T8106-1999 容积真空泵噪声测量方法
JB/T8944-1999 单级旋片真空泵
JB/T8107-1999 容积真空泵振动测量方法
JB/T10134-1999 带真空泵交流发电机技术条件
JB/T53019-1999 油扩散真空泵产品质量分等
JB/T53022-1999 滑阀真空泵产品质量分等
JB/T53014-1999 单级多旋片真空泵产品质量分等
JB/T53018-1999 罗茨真空泵产品质量分等
JB/T53017-1999 旋片真空泵产品质量分等
JB/T53016-1999 往复真空泵产品质量分等
JB/T53299-1999 单级水环真空泵产品质量分等
JB/T53020-1999 油扩散喷射真空泵产品质量分等
JB/T53301-1999 两级水环真空泵产品质量分等
NF E51-291-1996 压缩机和真空泵.安全要求.第(Compressors and vacuu m pumps. Safety requirements
2部分:真空泵 . Part 2 : vacuum pumps.)
NF E51-290-1996 压缩机和真空泵.安全要求. (Compressors and vacuu m pumps. Safety requirements
第1部分:压缩机 . Part 1 : compressors.)
NF X10-501-1976 真空技术.词汇.真空泵(Vacuum technology. Voca bulary. Vacuum pumps.)
ANSI/ASME PTC 9-1974 性能试验规范.容积式
压缩机、真空泵和鼓风机(Performance Test Code - Disp lacement Compressors,
Vacuum Pumps and Blowers) ANSI/UL 1450-2003 电动空气压缩机、真空(Motor-Operated Air Comp ressors, Vacuum
泵和涂漆设备Pumps, and Painting Equipment )
ASME PTC 9 Erratum-1972 容积式压缩机, (Displacement compres sors, vacuum pumps,
真空泵和鼓风机.正误表and blowers; Erratum)
ASME PTC 9-1970 容积式压缩机,真空泵(Displacement compressors, vacuum pumps, and blowers)
和鼓风机
BS EN 1012-1-1997 压缩机和真空泵.安全(Compressors and vacuum pumps - Safety
要求.压缩机requirements - Compressors)
BS EN ISO 14847-1999 转式变容真空泵. (Rotary positive displacem ent pumps -
技术要求Technical requirements)
BS EN 1012-2-1997 压缩机和真空泵.安(Compressors and vacuum pumps - Safety requirements
全要求.真空泵- Vacuum pumps)
EN 1012-1-1996 压缩机和真空泵安全Compressors and vacuum p umps - Safety
要求第1部分：压缩机requirements - Part 1: Compre ssors
EN 1012-2-1996 压缩机和真空泵安全要Compressors and vacuum pu mps - Safety
求第2部分：真空泵requirements - Part 2: Vacuum p umps
DIN EN 1012-1-1996 压缩机和真空泵.安全(Compressors and vacuum pumps, safety requirements -
要求.第1部分:压缩机Part 1: Compressors; German v ersion EN 1012-1:1996)
DIN EN 1012-2-1996 压缩机和真空泵.安全(Compressors and vacuum
pumps, safety requirements
要求.第2部分:真空泵- Part 2: Vacuum pumps; German v ersion EN 1012-2:1996)
DIN 28432-1996 真空技术.膜片真空泵(Vacuum technology - Accept ance specifications
的验收规则for diaphragm vacuum pumps)
DIN 45635-13-1977 机器噪声测量.空气载(Measurement of airborne no ise emitted by
声测量.包面法.空气压缩machines; enveloping surface m ethod,
机包括真空泵（活塞式. compressors, vacuum pumps incl uded (displacement-,
涡轮式和喷射式压缩机）turbo- and jet compressors)) DIN 28426-2-1976 真空技术.旋转活塞真(Vacuum technology; accepta nce specifications
空泵的验收规则.高真空for roots vacuum pumps for the r ange of medium vacuum)
范围内的摇杆式活塞真空泵
DIN 28400-2-1980 真空技术.名称和定义.真空泵(Vacuum technology; terms and definitions,
vacuum pumps)
DIN ISO 3019-3-1984 液压传动.变容真空泵和(Hydraulik fluid power; po sitive displacement
马达.装配法兰盘和轴端的尺寸pumps and motors; dimensions and identification
及识别代码.第3部分:多边形法code for mounting flanges and shaft ends; part
兰盘(包括圆形法兰盘) 3: polygonal flanges (including c ircular flanges))
DIN ISO 3019-2-1991 液压传动.变容真空泵和(Hydraulic fluid power; po sitive displacement
马达.装配法兰盘和轴端的尺寸pumps and motors; dimensions and identification
及识别代码.第2部分:两孔与四code for mounting flanges and shaft ends;
孔法兰与轴端.米制系列part 2: 2 and 4-hole flanges an d shaft ends, metric
series; identical with ISO 3019-2:1986)
DIN 28426-1-1983 真空技术.旋转真空泵.在近(Vacuum technology; accept ance specifications
似真空和高真空范围内的闭塞for rotary plunger vacuum pu mps, sliding vane
阀真空泵和旋转阀真空泵的验rotary vacuum pumps and rot ary piston vacuum
收规则pumps for the ranges of rough an d medium vacuum)
DIN 28431-1987 真空技术.液体环式真空泵的(Vacuum technology; accep tance specifications
验收规程for liquid ring vacuum pumps) DIN 28427-1983 真空技术.蒸气压低于1mbar的(Vacuum technology; acce ptance specifications for
扩散泵和蒸气喷射真空泵的验diffusions pumps and vapour j et vacuum pumps
收规则for vapour pressures of the pump fluid 1 mbar)
DIN 28430-1984 真空技术.以蒸汽作为驱动介(Vacuum technology; rules for the measurement
质的蒸汽喷射真空泵和蒸汽of steam jet vacuum pumps a nd steam jet
喷射压缩机用测量规则compressors using steam as th e working fluid)
JB/T6921-2004 罗茨真空泵机组
JB/T8540-2004 水蒸汽喷射真空泵
JB/T10462-2004 水喷射真空泵
JB/T7265-2004 蒸汽流真空泵
UL 1450-2003 电动空气压缩机、真空泵和喷(Motor-operated air compr essors, vacuum pumps
漆设备, and painting equipment)
JIS B8384-2000 液压.变容真空泵、机动泵(Hydraulic fluid power -- Pos itive displacement
和整体传动装置.稳态性能测定pumps, motors and integral tra nsmissions --
Determination of steady-state perfor mance)
JIS B8317-2-1999 蒸气真空泵.性能特性的
测定.第2部分:临界后压力的测定(Vapour vacuum pumps --Mea surement of performance
characteristics -- Part 2: Measureme nt of critical
backing pressure)
JIS B8323-2003 水封式真空泵(Water ring vacuum pumps) JIS B8317-1-1999 蒸气真空泵.性能特性的测定(Vapour vacuum pumps -- Measurement of performance
.第1部分:流量容积比率的测定(泵速) characteristics -- Part 1: M easurement of volume
rate of flow (pumping speed))
JIS B8385-2000 液压.变容真空泵、机动泵和整(Hydraulic fluid power -- Pu mps, motors and integral
体传动装置.参数定义和字母符号transmission -- Parameter defi nitions and letter
symbols)
JIS Z8126-2-1999 真空技术.词汇.第2部分:真(Vacuum technology -- Voc abulary -- Part 2:
空泵和相关条款Vacuum pumps and related term s)
ISO 1607-2-1989 变容真空泵.性能特性测量. (Positive-displacement vacu um pumps; measurem
第2部分:极限压力的测量ent of performance characterist ics; part 2:
measurement of ultimate pressure) ISO 16330-2003 往复式变容真空泵和泵装置(Reciprocating positive dis placement pumps and
.技术要求pump units - Technical requireme nts)
ISO 3529-2-1981 真空技术.词汇.第2部分: (Vacuum technology; Vocab ulary; Part 2 : Vacuum
真空泵和有关术语.三种语言版pumps and related terms Trili ngual edition)
ISO 1608-2-1989 蒸汽真空泵.性能特性的测(Vapour vacuum pumps; m easurement of performance
量.第2部分:临界前级压力的测量characteristics; part 2: measur ement of critical
backing pressure)
ISO 1608-1-1993 蒸汽真空泵.性能特性的测量. (Vapour vacuum pumps; measurement of performance
第1部分:容积流量速度的测量(泵速) characteristics; part 1: me
asurement of volume
rate of flow (pumping speed))
QB/T1444-1992 ZBK型轻式专用两叶罗茨真空泵
QB/T1445-1992 湿式罗茨真空泵性能测试方法
JB/T6533-2005 旋片真空泵
JB/T7674-2005 罗茨真空泵
JB/T7675-2005 往复真空泵
GB/T19955.1-2005 蒸汽流真空泵性能测量方法第1部分：体积流率(抽速)的测量
GB/T19955.2-2005 蒸汽流真空泵性能测量方法第2部分：临界前级压力的测量
GB/T19956.1-2005 容积真空泵性能测量方法第1部分：体积流率(抽速)的测量
GB/T19956.2-2005 容积真空泵性能测量方法第2部分：极限压力的测量
JB/T8540-2004 水蒸汽喷射真空泵
JB/T10462-2004 水喷射真空泵。