英文版全自动吸塑封口机

Warranty Card
Respected user
Hello!Thank you for purchasing Shenzhen Xinyi Cheng Machinery Co.,Ltd.products,in order to better serve you,after the purchase of products,please certification to read,fill out and properly keep this warranty card.
Warranty content
Free repair items:
1,the warranty period for the installation and commissioning from the date of acceptance of 12months.The following are the same as the "
2,during the warranty period,in accordance with the instructions for the normal use of the conditions of the failure (the normal production of equipment when the non-human operation and other reasons to determine the error),to be free repair.The following are the same as the "
3,during the warranty period,if one of the following circumstances,must be repaired as a fee:
1)can not provide this guarantee and valid purchase certificate.The following are the same as the "
2)the use of the error and the improper repair caused by the failure and damage.The following are the same as the "Username
Contact person Date of purchase
Contact number Product name
Model
User address
Maintenance records
Date Causes and handling of faults
3)After the purchase of the transport,move,drop caused by failure or damage.
4)other unavoidable external factors cause failure and damage.The following are the same as the"
5)Damage caused by improper use of equipment or other solution.
6)Damage caused by the use of a power supply other than the specified voltage. The following are the same as the"
4,in this warranty within the time limit,according to the above conditions for free repair.
5,since you buy this product sign the first day,where the use of instructions to install and use,within one year of non-human quality problems,we provide free maintenance,one year after the maintenance only charge maintenance fees.
Full auto blister packing machine
Thank you for choosing the Shenzhen Xinyi Cheng Co.,Ltd.production of
high-quality equipment
①.Introduction
The machine adopts pneumatic components to drive the pressure plate work,and the PVC/PE/PP and other plastic blister forming materials are combined with the cardboard,and the operation is simple,convenient and efficient.It is suitable for all kinds of exquisite toys,stationery,Daily necessities,small tools,plastic packaging, packaging,packaging products to look crystal clear,transparent,crisp,improve the grade of goods.
②.Main parameters and specifications
Model Turntable shape No.of mold
XYC-AL50Round4
XYC-AL50S Round4
Use power:240v50Hz15A single phase
Electric power:up to3.5KW
Platen area:350*400(mm)
Work efficiency:up to20times/min
Machine size:1800(long)*1300(wide)*1900(high) Weight:400(KG)
③、Machine trachea connection diagram
1.ammeter
2.indicator light
3.Heating time system
4.Fuse
5.Heating switch
6.Digital table
7.Platen8.Bakelite terminal
9.Indicator light10.Cooling time system
11.Fuse12.Cooling switch
13.General system14.Heating current switch 15.horizontal table16.barometer
17.Pneumatic regulator18.Chassis switch
19.Air supply pipe20.Delay time
④、the main parts of the machine name
⑤、the function of their use
1.Ammeter:Indicates the current that is added to the bakelite
2.Indicator light:Indicates the heating operation status
3.Time system:adjust the heating time
4.Fuse:protects the internal power supply transformer
5.Heating switch:turn off and turn on the heating time of the current
6.Digital table:cumulative production quantity
7.Platen:Make the packing jam and the plastic cover in close contact
8.Posts:to provide working power to the bakelite
9.Indicator light:Indicates the cooling working condition
10.Fuse:Provides electricity for all instruments in the machine
11.Cooling time system:adjust the cooling time
12.Cooling switch:turn off and turn on the cooling time of the current
13.General system:cut off,connected to the whole power supply
14.Heating current switch:adjust the heating strength of the mold
15.Horizontal platform:support bakelite mold
16.Barometer:Indicates the size of the supply air pressure
17.Pneumatic control valve:adjust the required working pressure
18.Chassis switch:open the chassis door
19.Air supply:
20.Delay time system:delay effect
⑥、Debugging procedures and methods
1Press the chassis switch button,the switch lock automatically open after opening the chassis door,the compressed air pipe from the bottom of the chassis into the bottom of the hole,and then into the chassis door behind the air pressure control valve inlet,fixed with a clamp The
2Close the door,open the air source switch input compressed air,the machine automatically press the plate.According to the size of the package, the thickness of the plastic sheet and the actual packaging,rotary pressure regulating valve hand pressure will be adjusted to the appropriate pressure. The greater the pressure,the faster the pressure plate pressure,the greater
the pressure,the general tune to the bomb box to play a more appropriate atmospheric pressure.
3will be inserted into the machine wire plug200v AC power outlet,open the machine circuit system,connected to the whole circuit.
4The bakelite mold(with the user according to the packaging equipment) placed in the horizontal platform,bakelite on the wire and the machine module in the middle of the bakelite junction pin connected.
5Turn on the cooling switch,turn on the cooling time circuit,adjust the cooling time,and set the cooling time.
6counterclockwise to promote the mold table rotation,observe the pressure plate automatically press the situation is normal.If no exception.You can put the plastic parts and cardboard placed on the bakelite mold began to test packaging.
7Turn on the heating switch to turn on the heating time circuit,adjust the heating time when the button is set,according to the actual packaging situation to select the appropriate bakelite heating element heating time.
8heating current conversion system is used to adjust the bakelite mold heatsink current size,according to the actual packaging situation to select the appropriate heating current stalls.
9users can be based on the case of the test package,according to the above components of the device function,were adjusted to satisfaction so far.
How to connect the mold
Auto machine pic:
All functions are in the touch screen,we will install English version system.
Including pre-sealing time,sealing time,cooling time,collecting and feeding time.You could chose to manual version when need to debug or fix the mold.
The card feeding system could put4card in one time,and could put different sizes card by adjust the screw.
Scution nozzles are powerful,can be adjust for different size cards.And there is a bag of spare
nozzles.
The mechanical part of the machine is simple and easy to use,and the export type is easy to replace at any time.Mitsubishi PLC does not set a password,can be any programming.
Common troubleshooting methods Fault phenomenon
Cause of issue Troubleshooting method The machine does not move Lack of power,gas source
The master switch is not open
Control insurance melts Send power,send gas source Turn off the master switch Check short circuit fault,replace fuse
High temperature,black film The heating time is too long Heating voltage is too long
Adjust the heating time system
Adjust the film kind of switch
Stereotypes are not good Air conditioning time is
too short Adjust the cooling time
system。