DNV RP-F101(挪威船级社 RP-F101油气管道腐蚀评价推荐标准 2004.10)
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Computer Typesetting (FM+SGML) by Det Norske Veritas. Printed in Norway
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas.
DET NORSKE VERITAS
FOREWORD
DET NORSKE VERITAS (DNV) is an autonomous and independent foundation with the objectives of safeguarding life, property and the environment, at sea and onshore. DNV undertakes classification, certification, and other verification and consultancy services relating to quality of ships, offshore units and installations, and onshore industries worldwide, and carries out research in relation to these functions.
© Det Norske Veritas. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, including photocopying and recording, without the prior written consent of Det Norske Veritas.
RECOMMENDED PRACTICE DNV-RP-F101
CORRODED PIPELINES
OCTOBER 2004
Since issued in print (October 2004), this booklet has been amended, latest in October 2006. See the reference to “Amendments and Corrections” on the next page.
Acknowledgements This Recommended Practice is based upon a project guideline developed in a co-operation between BG Technology and DNV. The results from their respective Joint Industry Projects (JIP) have been merged and form the technical basis for this Recommended Practice.
— Recommended Practices. Provide proven technology and sound engineering practice as well as guidance for the higher level Offshore Service Specifications and Offshore Standards.
Amendments and Corrections
This document is valid until superseded by a new revision. Minor amendments and corrections will be published in a separate document normally updated twice per year (April and October). For a complete listing of the changes, see the “Amendments and Corrections” document located at: http://www.dnv.com/technologyservices/, “Offshore Rules & Standards”, “Viewing Area”. The electronic web-versions of the DNV Offshore Codes will be regularly updated to include these amendments and corrections.
— Offshore Standards. Provide technical provisions and acceptance criteria for general use by the offshore industry as well as the technical basis for DNV offshore services.
Amended October 2006 see note on front cover
Recommended Practice DNV-RP-F101, October 2004 Page 3
CONTENTS
1.
GENERAL .............................................................. 5 4.3 Longitudinal corrosion defect, internal pressure
DNV is grateful for valuable co-operations and discussions with the individual personnel of these companies.
Comments may be sent by e-mail to rules@dnv.com For subscription orders or information about subscription terms, please use distribution@dnv.com Comprehensive information about DNV services, research and publications can be found at http://www.dnv.com, or can be obtained from DNV, Veritasveien 1, NO-1322 Høvik, Norway; Tel +47 67 57 99 00, Fax +47 67 57 99 11.
1.5 Structure of RP ........................................................5 5. 1.6 Applicable defects....................................................5
DNV Offshore Codes consist of a three level hierarchy of documents:
— Offshore Service Specifications. Provide principles and procedures of DNV classification, certification, verification and consultancy services.
pressure and superimposed longitudinal
1.4 Application ...............................................................5
compressive stresses.............................................. 15
1.1 Introduction ........................................................Fra Baidu bibliotek....5
and superimposed longitudinal compressive stresses.................................................................... 14
DNV Offshore Codes are offered within the following areas: A) Qualification, Quality and Safety Methodology B) Materials Technology C) Structures D) Systems E) Special Facilities F) Pipelines and Risers G) Asset Operation H) Marine Operations J) Wind Turbines
— BG plc — BP Amoco — Health and Safety Executive, UK — Minerals Management Service (MMS) — Norwegian Petroleum Directorate (NPD) — PETROBRAS — Phillips Petroleum Company Norway and Co-Ventures — Saudi Arabian Oil Company — Shell UK Exploration and Production, Shell Global Solutions, Shell International Oil Products B.V. — Statoil — Total Oil Marine plc
We would like to take this opportunity to thank the sponsoring companies / organisations for their financial and technical contributions (listed in alphabetical order):
1.2 Update year 2004 .....................................................5
4.4 Circumferential corrosion defects, internal
1.3 BG plc and DNV research projects........................5
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers, employees, agents and any other acting on behalf of Det Norske Veritas.
DET NORSKE VERITAS
FOREWORD
DET NORSKE VERITAS (DNV) is an autonomous and independent foundation with the objectives of safeguarding life, property and the environment, at sea and onshore. DNV undertakes classification, certification, and other verification and consultancy services relating to quality of ships, offshore units and installations, and onshore industries worldwide, and carries out research in relation to these functions.
© Det Norske Veritas. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, including photocopying and recording, without the prior written consent of Det Norske Veritas.
RECOMMENDED PRACTICE DNV-RP-F101
CORRODED PIPELINES
OCTOBER 2004
Since issued in print (October 2004), this booklet has been amended, latest in October 2006. See the reference to “Amendments and Corrections” on the next page.
Acknowledgements This Recommended Practice is based upon a project guideline developed in a co-operation between BG Technology and DNV. The results from their respective Joint Industry Projects (JIP) have been merged and form the technical basis for this Recommended Practice.
— Recommended Practices. Provide proven technology and sound engineering practice as well as guidance for the higher level Offshore Service Specifications and Offshore Standards.
Amendments and Corrections
This document is valid until superseded by a new revision. Minor amendments and corrections will be published in a separate document normally updated twice per year (April and October). For a complete listing of the changes, see the “Amendments and Corrections” document located at: http://www.dnv.com/technologyservices/, “Offshore Rules & Standards”, “Viewing Area”. The electronic web-versions of the DNV Offshore Codes will be regularly updated to include these amendments and corrections.
— Offshore Standards. Provide technical provisions and acceptance criteria for general use by the offshore industry as well as the technical basis for DNV offshore services.
Amended October 2006 see note on front cover
Recommended Practice DNV-RP-F101, October 2004 Page 3
CONTENTS
1.
GENERAL .............................................................. 5 4.3 Longitudinal corrosion defect, internal pressure
DNV is grateful for valuable co-operations and discussions with the individual personnel of these companies.
Comments may be sent by e-mail to rules@dnv.com For subscription orders or information about subscription terms, please use distribution@dnv.com Comprehensive information about DNV services, research and publications can be found at http://www.dnv.com, or can be obtained from DNV, Veritasveien 1, NO-1322 Høvik, Norway; Tel +47 67 57 99 00, Fax +47 67 57 99 11.
1.5 Structure of RP ........................................................5 5. 1.6 Applicable defects....................................................5
DNV Offshore Codes consist of a three level hierarchy of documents:
— Offshore Service Specifications. Provide principles and procedures of DNV classification, certification, verification and consultancy services.
pressure and superimposed longitudinal
1.4 Application ...............................................................5
compressive stresses.............................................. 15
1.1 Introduction ........................................................Fra Baidu bibliotek....5
and superimposed longitudinal compressive stresses.................................................................... 14
DNV Offshore Codes are offered within the following areas: A) Qualification, Quality and Safety Methodology B) Materials Technology C) Structures D) Systems E) Special Facilities F) Pipelines and Risers G) Asset Operation H) Marine Operations J) Wind Turbines
— BG plc — BP Amoco — Health and Safety Executive, UK — Minerals Management Service (MMS) — Norwegian Petroleum Directorate (NPD) — PETROBRAS — Phillips Petroleum Company Norway and Co-Ventures — Saudi Arabian Oil Company — Shell UK Exploration and Production, Shell Global Solutions, Shell International Oil Products B.V. — Statoil — Total Oil Marine plc
We would like to take this opportunity to thank the sponsoring companies / organisations for their financial and technical contributions (listed in alphabetical order):
1.2 Update year 2004 .....................................................5
4.4 Circumferential corrosion defects, internal
1.3 BG plc and DNV research projects........................5