RT-flex柴油机(电喷)控制系统
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CLU-4 Pulse Jet Lubrication
RT-flex Training
CLU-4
Function of the CLU-4 Pulse Jet
Cylinder Lubrication System
Chapter 72
“The CLU-4 Pulse Jet Cylinder Lubrication System”
8
dosage pump
The feed rate is adjusted by skipping more or less un-lubricated strokes. The injection is initiated on up-strokes only.
The vertical distribution is governed by the injection timing as a function of the crank angle. The cylinder lubricating oil can be injected into the cylinder above, into or below the piston. The timing is weighted in order to optimise the distribution characteristics.
CLU-4 Pulse Jet Lubrication Components
Lubricating oil filter with measuring system
Pulse lubricating module (dosage pump with an electronically controlled timing device)
Lubricators (up to eight lubricators in a row)
8
Control system
Servo oil pressure reducing unit
CLU-4 Pulse Jet Lubrication Arrangement
CLU-4 Pulse Jet Lubrication ALM-20
CLU-4 Pulse Jet Lubrication Cross Section
CLU-4 Pulse Jet Lubrication Lubricator
CLU-4 Pulse Jet Lubrication Results Field test on RT-flex96C
Cylinder #8 after 1800 running hours