SN65LVDS387DGGRG4中文资料
LED数码管规格说明书
LED数码管规格说明书
LED分段跳数码灯管是光电技术结合的最新灯饰产品，由数码控制电路和RGB三色LED光源组成。
既有日光灯的柔和，又有霓虹灯的动感，一根灯管就可以达到七彩渐变、跳变、流水、追逐、扫描等效果。
根据安装方式不同，可组成变化出不同颜色的字符、图案等各种动态效果。
根据控制系统的选择，还可以达到实时数据采集播放，通过控制系统跟计算机连接可以实现电脑播放与灯管同步播放的效果!广泛应用于楼体轮廓、街道亮化、户外广告屏，舞台景观及娱乐场所的装饰照明!本公司LED数码管分为6段/8段/16段, 根据客户安装环境, 可自行调配! 花样变化可由我公司根据客户要求进行编辑!
可用控制方案:
1/ LED主控机 [普通招牌]
2/ 2号主控 [小型轮廓]
3/ CF卡/SD卡 [即插即拔最新研制]
4/ 实时播放 [电脑同步]。
格拉斯腾德冷冻展示器产品说明书
Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780800.748.0423 · 989.752.4275 · Fax 989.752.4444 · L ettuce c risper - Lcc ountertop M erchandiser- cM24W aLL -M ount r efrigerator - WMr24s-L, WMr24s-r,WMr24X-L, WMr24X-r© 2016 Glastender, Inc.Rev. 02-27-19A Family Company Manufacturing In The USA Since 1969M anufacture d ate & s eriaL n uMber i nforMationThis manual is specific to:• Lettuce Crispers: manufactured September 23, 2011 and after starting with SN 134133546Xand up to and including SN 134171318X , and PRIOR TO March 15, 2017.• Countertop Merchandisers: manufactured September 22, 2011 and after starting with SN 134136045 and up to and including SN 134171318X , and PRIOR TO March 15, 2017.• Wall-Mount Refrigerators: manufactured September 22, 2011 and after starting with SN 134133503 and up to and including SN 134171318X , and PRIOR TO March 15, 2017.CM24XX-RRWMR24S-RLC1Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • This manual describes the operation features of the Lettuce Crisper, Countertop Merchandiser, and Wall-Mount Refrigerator. Please review this information before attempting installation and operation. Long term, trouble-free operation will follow if good housekeeping and maintenance procedures are followed. Thank you for selecting Glastender, Inc. products..u tiLity r equireMents and c onnectionsElectrical: 115 V olt AC, 1 Phase, 60 Hz, 6.64 full load amps. A separate 15 amp circuit isrequired. A 10-foot grounded cord is included.Plumbing: Automatic condensate evaporator. No drain connection required.u ncrating and s tart -up i nstructionsAll models are shipped in one carton. These steps should be followed:1. If legs are included, bolt them to the base with bolts provided.2. For lettuce crisper and wall-mount refrigerator wall mounting instructions, see page3. 3. Position unit. It must be level and plumb.4. Plug into 115 volt AC outlet.5. Your Glastender equipment is now ready for use.i ntroductionIMPORTANT !! Attention Service Companies IMPORTANT !!Please review the important warranty information on page 10. If you believe a service call should be coveredby the factory, please call the factory for authorization between 8AM and 5PM EST, Monday through Friday.2Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • INSTRUCTIONS:NOTE: Mounting instruction applies to both the lettuce crisper andwall-mount refrigerator. Lettuce crisper shown in illustration.NOTE: 8″ of air space is required above unit to allow for air flow out. WARNING: Compressor failure due to restriction or blockage of air flow will void warranty.1. Mark a level line at the bottom of the lettuce crisper / wall-mount refrigerator.2. From this line measure up 24¾″ and mark another level line.3. On this line drill holes to match the holes in the wall mount bracket.4. Install wall mount bracket.5. Attach lettuce crisper / wall-mount refrigerator.6. If lettuce crisper / wall-mount refrigerator is not on an existing shelf, secure with bottom bracket.NOTE: At least two (2) of the mounting holes in the bracket should line up with studs in the wall for safe, secure mounting.ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 20 minutes weekly.FREQUENCY: Daily cleaning of exterior & door gaskets. Weekly cleaning of interior.PROCEDURE:1. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all contact surfaces.2. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.3. Dry with a soft clean cloth, removing standing water as soon as possible.4. A more thorough cleaning of the interior should be done weekly (more frequently as necessary).5. The condensing unit air filter (front top left) should be removed and thoroughly rinsed in hot clean water at least once per quarter.NOTES:1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel surfaces, since they willbreak down the passivity layer and allow corrosion to occur.2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite ® pad for more stubborn stains. Always scrub with thedirection of the grain. Follow with a thorough cleaning as described above.3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if not removed.4. Door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to premature failure, since alcoholand moisture build-up breaks down the gasket material.c Leaning i nstructionsC LBO TTOM BRACKET3Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • The lettuce crisper, countertop merchandiser, and wall-mount refrigerator are programmed to automatically defrost four times daily for approximately twenty minutes. During defrost, the fan inside the cooler will remain on and the refrigeration system will turn off. To initiate defrost manually, push and hold the DEFROST button for more than two seconds.The thermostat controller does not have an “OFF” function. To turn the unit off, the unit must be unplugged or power to the electrical branch circuithas to be turned off via a circuit breaker or switch.The operating temperature range is preset at the factory according to the table below and can be adjusted up or down within the limits shown.To see the set point - push and immediately release the SET button. The set point will be displayed.To return to normal visualization - Push and immediately release the SET button or wait five seconds.To change the set point - push and hold the SET button for more than two seconds. When the º F display begins flashing, push the up arrow or down arrow buttons to adjust the set point to the desired value.To save the new set point and return to the temperature display mode - push and release the SET button or wait ten seconds.Models LC, CM24, and WMR24 regarding the Dixell digital thermostat controllerThe thermostat control probe wire connector maybecome disconnected when the front cover is removed. This will result in thermostat P1 code. While the P1 code is flashing the compressor will cycle 5 minutes on and 5 minutes off and may cause icing of the evaporator coil. Service calls to reconnect the probewiring are not covered by factory warranty.connector4Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • The following electrical and refrigeration specifications apply:d esignr efrigerantp ressureM odeL e LectricaLt ypec harge h igh L oW R134a LC115V , 1 Ph., 60 Hz., 5.5 AMPR134a8.0 oz.23288Cond FanS t a r t R e l a yCSROverloadStart CapacitorWhiteC o m p r e s s o rWhiteGreenBlack12346789ControllerWhite BlueOrange Orange J BoxWhiteBlue 120/240VAC 50/60HZ12 VDCTransformerEvap FanBlueWhite Blue (-)(+)Power Supply 120VAC 60HZ 1PH Lights Per Unit VariesBrownLight SwitchOptional230VAC 50HZ 1PHLights for WMR / CM / UCR / FV5Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 67*81213*04/27/2017 -7. 11000131 has been discontinued6Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • p art n o .d escriptionp ricee LectricaL c oMponents1217167Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 8Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 06009699p rices:All prices are LIST. Applicable taxes will be added.q uotations:Unless otherwise stated, quotations are effective for 30 days only.a cceptance:All orders are subject to acceptance by Glastender, Inc.’s headquarters in Saginaw, Michigan. Possession of the Product Directory and Price List is not an offer to sell.s hipMents:F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or Collect if shipped directly to you. Prepay and Add to Invoice freight terms are available upon request. The approximate shipping weights of all products are listed with the prices. Partial shipments will be made unless otherwise specified by the customer. Surface freight classifica-tions are:• GT-24/GT-30/GW24 Glasswashers - Class 175• GT-18 Glasswashers - Class 250• All Underbar Equipment - Class 175• Bar Die Orders – Class 250• Portable Bars - Class 175• Remote refrigerators (i.e., no compressor) or dry storage back bar equipment - Class 175• Self-contained refrigeration equipment - Class 150• Ice Display Units (IDU and GDU) - Class 85• Lighted Liquor Displays - Class 85• Beer line chillers and beer towers (beverage dispensing equipment) - Class 92.5• Bottle Disintegration System - Class 150• Ice Cream Freezers - Class 77.5All small items are evaluated to see the most cost effective means for shipment. Many small items ship via UPS or FedEx; however, when dimensional weight is excessive, LTL carriers are the most cost effective choice. Spare parts orders received before 1:00 PM EST can usually be shipped the same day.The order department is happy to assist with routing or shipping questions. p ayMent t erMs:Cash should be included with all orders unless credit terms have been arranged. To establish credit, banking and trade references are required.A convenient credit application is available upon request. Payment via credit card is not our normal means of receiving payment. Visa and MasterCard will be accepted, but must be charged at the time of ship-ment. In addition, a payment via credit card for orders totaling more than $500 will incur a 3% convenience fee on the total transaction amount.d eLivery:The majority of equipment is manufactured to order and typically ships within three to six weeks after complete order information is received by the factory. In-stock equipment typically ships within two to three days of the factory receiving complete order information.r eturns:Items specified as “Manufactured to Order” are NOT returnable.A Return Authorization number must be issued by the factory in advance for any items that are returnable. The number MUST be noted on the outside of the returned package. Returns must be received within 90 days of the issue date. Shipping charges must be prepaid. A mini-mum 20% restocking charge will be applied to all authorized returns if received in new, unused condition in the original packaging.The above conditions apply to spare part returns, except spare part returns must be received within 30 days of original shipment for elec-tronic or electrical parts or within 90 days for all other parts.L oss or d aMage:For customer routed shipments, Glastender, Inc. is not responsible for any loss, damage, or delay of merchandise during shipment. Such transit claims must be filed with the carrier. Merchandise must be examined on arrival. If shortages occur, Glastender, Inc. must be notified in writing within five (5) days of delivery to honor any shortage claim. Glastender will assume responsibility for freight claims on Prepay and Add ship-ments but the customer must inspect freight and note any damage upon receipt. Failure to do so may result in losses at the customer’s expense.c ustoM o rders:Custom orders must be paid in advance and are not subject to cancellation.L aMinates:Some products include common, readily available plastic laminates of the customer’s selection. There may be an additional charge if uncom-mon varieties are ordered.12/14/179Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 10Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • Glastender, Inc. warrants all products to be free of defects in mate-rial and workmanship. One-year labor and parts warranty applies to all glasswashers, self-contained refrigeration models, and BDS model bottle disintegration units. In established areas, a start up is included with GT-24 and GT-30 model glasswashers. Warranty is effective for one year from the date of installation or up to 18 months from date of factory shipment, whichever occurs sooner. Glastender, Inc. will replace any part or assembly found defective under normal use and service.For warranty labor claims beyond 15 months from the date of factory shipment, proof of date of installation or occupancy must be provided. Authorization for labor must be obtained from Glastender within the warranty period and prior to the service being bor warranty applies to the United States and Canada only.Remote refrigeration models and beer line chillers include a one-year parts warranty only. There is no labor warranty on these products.Field replacement parts not covered under the original warranty include a 90-day part warranty from the date of installation.FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY: Glastender will warrant to the original user the compressor for all self-contained refrigeration models for an additional four years following the regular one-year warranty period. This plan applies to the compressor only.A completed warranty claim form MUST accompany all returned defec-tive parts or assemblies. Upon request, a defective part or assembly must be returned to Glastender, Inc., Saginaw, Michigan, with all transporta-tion and delivery charges prepaid. Warranty repairs or replacements will be shipped FOB factory in Saginaw, Michigan. Reimbursement for applicable freight charges covers ground service only.Glastender provides in-warranty repairs during a service company’s regular working days and hours. There is no provision for payment of a premium rate during “overtime” hours. When warranty service is requested during other than normal working hours, the end user will be charged the premium portion of the overtime rate.The warranty covers substantiated travel expenses for up to 2 hours / 100 miles round trip up to a maximum of $150. Any additional costs due to installations that require extra work, time, or travel to gain access for service are the sole responsibility of the equipment purchaser. Any exceptions to these travel and access limitations must be pre-approved by a factory representative.The warranty does not cover door gaskets, chemical tubing, pump squeeze tubing, and/or any equipment subjected to accidents, freight damage, alterations from the original design, improper power and/or plumbing hookups, improper chemical use, general misuse, or lack of routine required maintenance as determined by Glastender, Inc. Installation, normal control adjustments, general maintenance, correct-ing an installation error, or service calls that reveal the unit is function-ing normally will not be reimbursed under warranty.Condenser coils on self-contained refrigeration products must be cleaned regularly. Failure to provide adequate air flow to a refrigeration unit will void the warranty.Glastender shall not be liable for loss of use, revenue, or profit, or for any other indirect, incidental, special, or consequential damage includ-ing, but not limited to, product spoilage or loss.This warranty is conditioned upon Glastender receiving notice of any defect subject to this warranty within sixty (60) days of its discovery by the end user or dealer. All products are warranted only for the initial place of installation. Removal of a product automatically terminates this warranty.SECOND YEAR EXTENDED PARTS & LA BO R WARRANTY:Glastender’s one-year parts and labor warranty on self-contained refrig-eration units, excluding beer line chillers, can be extended to two years with the purchase of a two year parts and labor warranty. Specify part number EWR2 ($150 net price) when ordering.EXPORT WARRANTY - One year parts only.EXCLUSION OF WARRANTIESEXCEPT AS PROVIDED A BO VE, GLASTENDER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.LIMITATION OF REMEDIES AND DAMAGES If Buyer makes a valid and timely claim as outlined above, Glastender’s liability and Buyer’s remedies under this agreement will be limited solely to labor charges authorized and/or replacement or credit, at Glastender’s option, with respect to Products returned at Buyer’s expense within thir-ty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE RETURNED PRODUCTS. GLASTENDER WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LA BO R COSTS EXCEPT AS COVERED UNDER OUR WARRANTY , LOST PROFITS OR THE LOSS OF PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’ INCORPORATION INTO OR BECOMING A COMPONENT OF ANY OTHER PRODUCT. NEITHER PARTY WILL HA VE ANY NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR TO ANY THIRD PARTY , ARISING FROM ANY BREACH OF THIS AGREEMENT.GOVERNING LAW - JURISDICTIONThe terms and conditions of an order are to be governed and construed according to the laws of the State of Michigan, without regard to conflict of laws principles. Buyer hereby consents to the jurisdiction and venue of the courts located in Saginaw County, Michigan.No representative, distributor, dealer, or any other person is authorized to modify this warranty. This warranty replaces all other written or verbal warranties.NOTE: Glastender, Inc.’s policy of constant quality improvement means that prices, specifications, and policies are subject to change without notice. Questions regarding this warranty should be directed to Glastender’s Warranty Administrator.04-19-17APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA。
辛迪莱SN65LVDS4评估模块的用户指南说明书
User's GuideSLLU151–July2011SN65LVDS4Evaluation Module The Texas Instruments SN65LVDS4Evaluation Module board is used to evaluate the SN65LVDS4LVDS receiver with selectable output levels.Contents1Introduction (2)2SN65LVDS4EVM Kit Contents (2)3SN65LVDS4EVM Board Configuration (2)4Power Supply Configuration (3)5Test Setup (3)6Schematic,Bill of Materials,and Board Layouts (4)6.1Schematic (4)6.2Bill of Materials (5)6.3Board Layouts (6)List of Figures1SN65LVDS4EVM Board (2)2SN65LVDS4Schematic (4)3SN65LVDS4EVM Board Layout,Top–Layer1 (6)4SN65LVDS4EVM Board Layout,GND–Layer2 (7)5SN65LVDS4EVM Board Layout,POWER–Layer3 (8)6SN65LVDS4EVM Board Layout,Bottom–Layer4 (9)List of Tables1Power Supply Acceptable Combinations (3)2EVM and Device Connections (3)3SN65LVDS4EVM Bill of Materials (5)4SN65LVDS4EVM Printed-Circuit Board Layer Construction (6)1 SLLU151–July2011SN65LVDS4Evaluation Module Submit Documentation FeedbackCopyright©2011,Texas Instruments IncorporatedIntroduction 1IntroductionThe Texas Instruments SN65LVDS4Evaluation Module(EVM)board is used to evaluate the SN65LVDS4 LVDS receiver.The device can provide output voltage logic levels based on an external VDD pin,thus eliminating the need for external level translation.The board enables the system designer to connect50-Ωcoaxial cables via SMA connectors at the inputs and an SMA or high-impedance probe at the output.2SN65LVDS4EVM Kit ContentsThe SN65LVDS4EVM kit contains the following:•SN65LVDS4EVM board•SN65LVDS4EVM User’s Guide(this document)3SN65LVDS4EVM Board ConfigurationThe SN65LVDS4input differential pair(J1,J3)and single-ended output(J2)are available through theedge launch SMA connectors.Figure1.SN65LVDS4EVM Board2SN65LVDS4Evaluation Module SLLU151–July2011Submit Documentation FeedbackCopyright©2011,Texas Instruments Incorporated Power Supply Configuration 4Power Supply ConfigurationTwo power supplies are needed to bias the SN65LVDS4–VCC,the core power supply,and VDD,the output drive power supply.For proper device operation,it is recommended that VCC is powered up first and then VDD or VCC applied at the same time as VDD(In the later case,VCC and VDD are tiedtogether).Further,it is also recommended that VCC is equal to or less than VDD as shown in Table1.Table1.Power Supply Acceptable CombinationsVCC(V)VDD(V)Recommended1.8 1.8Yes1.82.5Yes1.8 3.3Yes2.5 1.8No2.5 2.5Yes2.53.3Yes5Test SetupMeasuring the output signal on J2with a50-Ωcable terminated into50Ωat the scope attenuates thesignal due to the453-Ωresistor(R1)in series with the receiver output on the EVM board.The resistor is installed as a current limit for termination into a50-Ωload,thus providing a10x attenuation on themeasured output signal.Measuring the output signal with a high-impedance probe on JMP1requires removing R1,the453-Ωresistor,and installing a0-Ωresistor on R4(0402).Measuring the output signal on JMP1allows the user to see absolute signal levels out of the device.See Table2for input and output connections.Table2.EVM and Device ConnectionsPinEVM Connection I/O DescriptionName No.J1A2I LVDS input,positiveJ3B3I LVDS input,negativeP2GND1,7—Ground—NC4,6,9—No connectJ2R8O 1.8/2.5LVCMOS/3.3LVTTL outputP1VCC5—Core supply voltageP3VDD10—Output supply voltage3 SLLU151–July2011SN65LVDS4Evaluation Module Submit Documentation FeedbackCopyright©2011,Texas Instruments Incorporated6Schematic,Bill of Materials,and Board Layouts6.1SchematicFigure2.SN65LVDS4Schematic4SN65LVDS4Evaluation Module SLLU151–July2011Submit Documentation FeedbackCopyright©2011,Texas Instruments Incorporated6.2Bill of MaterialsTable3.SN65LVDS4EVM Bill of MaterialsQty Reference Value Part Part Number Manufacturer2C1,C40.01µF CC0201GRM033R70J103KA01D Murata2C2,C50.1µF CC0201GRM033R60J104KE19D Murata1C310pF CC0402ECD-G0E100C Panasonic-ECG2C6,C1068µF CT7343TAJE686K025R AVX2C7,C1147µF CC1210EMK325BJ476MM-T Taiyo Yuden2C8,C1222µF CC1206C1206X5R6R3-226KNE Venkel2C9,C1310µF CT7343C1206X7R160-106KNE Venkel1JMP13Pin Berg Jumper HDR1X3HTSW-150-07-G-S Samtec3J1,J2,J3sma_edge JOHNSON_142-0701-801142-0701-801EF Johnson3P1,P2,P3Banana-Jack JOHNSON_108-0740-001108-0740-001Emerson Network Power 1R1453R0402RMCF0402FT453R Stackpole Electronics 1R2100R0201ERJ-1GEJ101C Panasonic-ECG1R30R0402RMCF0402ZT0R00Stackpole Electronics 1R4DNI_0R0402RMCF0402ZT0R00Stackpole Electronics 1U1SN65LVDS410-pin RSE SN65LVDS4Texas Instruments5 SLLU151–July2011SN65LVDS4Evaluation Module Submit Documentation FeedbackCopyright©2011,Texas Instruments Incorporated6.3Board LayoutsTable4.SN65LVDS4EVM Printed-Circuit Board Layer Construction Subclass Thickness Conductivity Dielectric Loss Width Impedance Type Material ArtworkName(mil)(mho/cm)Constant Tangent(mil)(Ω)(1) SURFACE AIRMASK LPIFINISH ENIG 1.29TOP CONDUCTOR COPPER0.68959590010POSITIVE1050 DIELECTRIC FR-460 4.20.035L2_GND PLANE COPPER 1.37859590010POSITIVEDIELECTRIC FR-4100 4.20.035L3_POWER CONDUCTOR COPPER 1.37859590010POSITIVEDIELECTRIC FR-460 4.20.035BOTTOM CONDUCTOR COPPER0.68959590010POSITIVE N/AFINISH ENIG 1.29MASK LPISURFACE AIR(1)Always consult with your board manufacturer for their process/design requirements to ensure the desired impedance isachieved.Figure3.SN65LVDS4EVM Board Layout,Top–Layer16SN65LVDS4Evaluation Module SLLU151–July2011Submit Documentation FeedbackCopyright©2011,Texas Instruments IncorporatedFigure4.SN65LVDS4EVM Board Layout,GND–Layer27 SLLU151–July2011SN65LVDS4Evaluation Module Submit Documentation FeedbackCopyright©2011,Texas Instruments IncorporatedFigure5.SN65LVDS4EVM Board Layout,POWER–Layer38SN65LVDS4Evaluation Module SLLU151–July2011Submit Documentation FeedbackCopyright©2011,Texas Instruments IncorporatedFigure6.SN65LVDS4EVM Board Layout,Bottom–Layer49 SLLU151–July2011SN65LVDS4Evaluation Module Submit Documentation FeedbackCopyright©2011,Texas Instruments IncorporatedEvaluation Board/Kit Important NoticeTexas Instruments(TI)provides the enclosed product(s)under the following conditions:This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,DEMONSTRATION,OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use.Persons handling the product(s)must have electronics training and observe good engineering practice standards.As such,the goods being provided are not intended to be complete in terms of required design-,marketing-,and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards.This evaluation board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility,restricted substances(RoHS),recycling(WEEE),FCC,CE or UL,and therefore may not meet the technical requirements of these directives or other related directives.Should this evaluation board/kit not meet the specifications indicated in the User’s Guide,the board/kit may be returned within30 days from the date of delivery for a full refund.THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES,EXPRESSED,IMPLIED,OR STATUTORY,INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.The user assumes all responsibility and liability for proper and safe handling of the goods.Further,the user indemnifies TI from all claims arising from the handling or use of the goods.Due to the open construction of the product,it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic discharge.EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE,NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT,SPECIAL,INCIDENTAL,OR CONSEQUENTIAL DAMAGES.TI currently deals with a variety of customers for products,and therefore our arrangement with the user is not exclusive.TI assumes no liability for applications assistance,customer product design,software performance,or infringement of patents or services described herein.Please read the User’s Guide and,specifically,the Warnings and Restrictions notice in the User’s Guide prior to handling the product.This notice contains important safety information about temperatures and voltages.For additional information on TI’s environmental and/or safety programs,please contact the TI application engineer or visit /esh.No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine,process,or combination in which such TI products or services might be or are used.FCC WarningThis evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,DEMONSTRATION,OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use.It generates,uses,and can radiate radio frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part15 of FCC rules,which are designed to provide reasonable protection against radio frequency interference.Operation of this equipment in other environments may cause interference with radio communications,in which case the user at his own expense will be required to take whatever measures may be required to correct this interference.EVM Warnings and RestrictionsIt is important to operate this EVM within the input voltage range of1.62V to2.75V and the output voltage range of1.62V to3.6 V.Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM.If there are questions concerning the input range,please contact a TI field representative prior to connecting the input power.Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM.Please consult the EVM User's Guide prior to connecting any load to the EVM output.If there is uncertainty as to the load specification,please contact a TI field representative.During normal operation,some circuit components may have case temperatures greater than40°C.The EVM is designed to operate properly with certain components above40°C as long as the input and output ranges are maintained.These components include but are not limited to linear regulators,switching transistors,pass transistors,and current sense resistors.These types of devices can be identified using the EVM schematic located in the EVM User's Guide.When placing measurement probes near these devices during operation,please be aware that these devices may be very warm to the touch.Mailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2011,Texas Instruments IncorporatedIMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right, or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use any non-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAudio /audio Communications and Telecom /communicationsAmplifiers Computers and Peripherals /computersData Converters Consumer Electronics /consumer-appsDLP®Products Energy and Lighting /energyDSP Industrial /industrialClocks and Timers /clocks Medical /medicalInterface Security /securityLogic Space,Avionics and Defense /space-avionics-defense Power Mgmt Transportation and /automotiveAutomotiveMicrocontrollers Video and Imaging /videoRFID Wireless /wireless-appsRF/IF and ZigBee®Solutions /lprfTI E2E Community Home Page Mailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2011,Texas Instruments Incorporated。
超低电压大电流直流电子负载
1.2.
主要特点 ............................................................................................................ 1
1.3.
主机面板介绍 .................................................................................................... 2
2.6.2. 控制连接 ............................................................................................................ 6
2.6.3. 采样连接 ............................................................................................................ 6
3.1.
控制模式 ............................................................................................................ 8
3.2.
恒电流测试功能（CC） ................................................................................... 8
2.6.
连接方式 ............................................................................................................ 5
SN65LVDS84AQ中文资料
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. FlatLink is a trademark of Texas Instruments.
48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25
D3 D2 GND D1 D0 NC LVDSGND Y0M Y0P Y1M Y1P LVDSVCC LVDSGND Y2M Y2P CLKOUTM CLKOUTP LVDSGND PLLGND PLLVCC PLLGND SHTDN CLKIN D20
DGG PACKAGE (TOP VIEW)
D4 VCC D5 D6 GND D7 D8 VCC D9 D10 GND D11 D12 NC D13 D14 GND D15 D16 D17 VCC D18 D19 GND
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
NC – Not Connected
description
The SN75LVDS84A and SN65LVDS84AQ FlatLink transmitters contains three 7-bit parallel-load serial-out shift registers, and four low-voltage differential signaling (LVDS) line drivers in a single integrated circuit. These functions allow 21 bits of single-ended LVTTL data to be synchronously transmitted over 3 balanced-pair conductors for receipt by a compatible receiver, such as the SN75LVDS82 or SN75LVDS86/86A. When transmitting, data bits D0 – D20 are each loaded into registers of the ’LVDS84A upon the falling edge. The internal PLL is frequency-locked to CLKIN and then used to unload the data registers in 7-bit slices. The three serial streams and a phase-locked clock (CLKOUT) are then output to LVDS output drivers. The frequency of CLKOUT is the same as the input clock, CLKIN.
SN65LVDS104DG4_datasheet
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
– SN65LVDS105 Receives Low-Voltage TTL (LVTTL) Levels
– SN65LVDS104 Receives Differential Input Levels, ±100 mV
• Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz
– SN65LVDS105 – 2.2 ns (Typ)
– SN65LVDS104 – 3.1 ns (Typ)
• LVTTL Levels Are 5-V Tolerant • Electrically Compatible With LVDS, PECL,
LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT, SSTL, or HSTL Outputs With External Networks
(Marked as LVDS105) (TOP VIEW)
EN1 1 EN2 2 EN3 3 VCC 4 GND 5
A6 NC 7 EN4 8
16 1Y 15 1Z 14 2Y 13 2Z 12 3Y 11 3Z 10 4Y 9 4Z
Nsiway NNSS44335588 超低EMI、无需滤波器、5W+3W×2的2.1声道 用户手
10.1
TQFN4×4-28 封装尺寸................................................................................................................... 18
10.2
SOP-28 封装尺寸............................................................................................................................ 19
7.3
NS4358 引脚功能描述 ..................................................................................................................... 9
7.4
芯片印章说明 ................................................................................................................................. 10
NS4358
超低EMI、无需滤波器、5W+3W×2的2.1声道+3D环绕立体声数字音频功放
NS4358 用户手册 V1.1
深圳市纳芯威科技有限公司 2011 年 10 月
Nsiway
1
日期
2011-3-11 2011-10-11
NS4358
超低EMI、无需滤波器、5W+3W×2的2.1声道+3D环绕立体声数字音频功放
广州华盛通电子有限公司 HXLVDSR 四路 LVDS 差分线电阻器商品说明书
The HXLVDSR along with the HXLVDSD provide an alternative to high power devices for high speed point to point interface applications. The receivers are equipped with a wide (0.05V to 2.35V) common mode input voltage range.The HXLVDSR is manufactured on a radiation hardened SOI-IV Silicon On Insulator (SOI) process with very low power consumption. The input of the HXLVDSR allows for easy interfacing to space and military imaging, sensor, and communications systems.Quad LVDS Differential Line Receiver Features▪ F our Independent Receivers ▪ R ad Hard: 300k Rad(Si) Total Dose ▪ S ingle +3.3 V Supply ▪ C ommon Receiver Enable Control ▪ H igh Impedance LVDS Inputs ▪ H igh Impedance Output Capability ▪ T emperature Range: -55°C to 125°C ▪ I nput Common Mode Range: 0.05Vto 2.35V▪ M aximum Operating Frequency:100MHz ▪ M inimum Input Differential Signal:100mVLow PowerThe HXLVDSR dissipates less than 500mW with all outputs toggling at a data rate of 100MHz.Common Receiver Enable Control(EN, EN*)The EN and EN* inputs allow the user to put the digital outputs into high impedance mode.Space Qualified Package The HXLVDSR is packaged in a 16 lead ceramic flat pack.The HXLVDSR is a radiation hardened quad differential line receiver. It features fourindependent receivers with common receiver enable control and high impedance outputs. The high impedance output capability allows multiplexing outputs.Pin DescriptionPackage PinoutP R O D U C T I O N - R e l e a s e - 21 J u l 2014 03:12:06 M S T - P r i n t e d o n 21 J u l 2014Block DiagramTruth TableFunctional DescriptionThe HXLVDSR is a radiation hardened quad differential line receiver designed for applications requiring low power dissipation and high data rates. The HXLVDSR accepts low voltage differential input sig-nals and translates them to 3.3V CMOS output levels. The receiver includes high impedance output capability to allow multiplexing outputs. The EN and EN* inputs allow active Low or active Highcontrol of the high impedance outputs. The enable signals are common to all four receivers. The dual enable scheme allows for flexibility in turning devices on or off. The HXLVDSR along with the HXLVDSD provide an alternative to high power devices for high speed point to point interface applications.R OUT1R OUT2R OUT3R OUT4R IN2+R IN2-R IN3+R IN3-R IN4+R IN4-EN EN*R IN1+R IN1-Signal DefinitionEN, EN*These are the common enable control signals. As shown in Truth Table, the combination of EN = L and EN* = H puts the outputs into the high impedance state. The outputs are enabled for all other combinations of EN and EN*.R IN1 – R IN4These are LVDS differential input pins.R OUT1 – R OUT4These are the 3.3V CMOS output pins.Absolute Maximum Ratings (1)(1) Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability.(2) One output at a time should be shorted and the max junction temperature should not be exceeded.2Recommended Operating Conditions (1)(2)Electrical RequirementsConditions unless otherwise specified: 3.0 V ≤ VDD ≤ 3.6 V, -55°C ≤ TC ≤ +125°C, VSS = 0 V(1) G uaranteed but not tested.(2) The VCMR range is reduced for larger V ID.3(1) S pecifications listed in datasheet apply when used under the Recommended Operating Conditions unless otherwise specified.(2) A ll unused CMOS inputs must be held at ground or VDD. All unused LVDS inputs must be held at ground or 2.4 volts differentially.Radiation-Hardness Ratings (1)(1) Device will not latch up due to any of the specified radiation exposure conditions.Capacitance Parameters (1)(1) G uaranteed but not tested.4Radiation CharacteristicsTotal Ionizing Dose RadiationThe device radiation hardness assurance TID level was qualified by 60Co testing, including overdose and accelerated annealing, per MIL -STD-883 Method 1019. Ongoing assurance is provided by wafer level X-ray testing during manufacturing.Transient Dose Rate Ionizing RadiationMany aspects of product design are addressed to handle the high energy levels associated with the transient dose rate events. The device will maintain basic functional operation during exposure to a pulse up to the DRU specification. The device will meet functional, timing and parametric specifications after exposure to a pulse up to the DRS specification.Neutron Irradiation DamageSOI CMOS is inherently tolerant to damage from neutron irradiation. The device meets functional and timingspecifications after exposure to the specified neutron tchupThe device will not latchup when exposed to any of the above radiation environments when applied under recommended operating conditions. SOI CMOS provides oxide isolationbetween adjacent PMOS and NMOS transistors and eliminatesany potential SCR latchup structures.Switching ParametersTest Conditions unless otherwise specified: 3.0 V ≤ VDD ≤ 3.6 V, -55°C ≤ TC ≤ +125°C, VSS = 0 V(1) G uaranteed but not tested by vendor.(2) M aximum LVDS Receiver Jitter performance is guaranteed between -5°C and 125°C case temperature, between 3.0 V and 3.6 V; and pre- and post-radiation. (3) AC sine wave Power Supply Noise of 60 mV p-p applied at 25 MHz.(4) The skew is the absolute value of the difference between the differential propagation delay High to Low and the differential propagation delay Low to High of the same channel. (5) The skew is the channel-to-channel difference of the differential propagation delays for any event on the same device. (6) T he skew is the absolute value of the difference between the minimum and maximum differential propagation delays between devices.Devices must be at the same VDD and within 5°C of each other. (7) T he skew is the absolute value of the difference between the minimum and maximum differential propagation delays between devices.(8) Cload = 10pFTiming DiagramsEN when EN* = V DDOutput when V ID = -100 mV V DD O VV OH50%1.5 VV OL 50%3 V GNDO V 1.5 V 3 V EN* when EN = GNDOutput when V ID = +100 mV5ReliabilityFor many years Honeywell has been producing integrated circuits that meet the stringent reliability requirements of space and de-fense systems. Honeywell has delivered hundreds of thousands of QML parts since first becoming QML qualified in 1990. Using this proven approach Honeywell will assure the reliability of the products manufactured with the SOI CMOS process technology. This approach includes adhering to Honeywell’s Quality Manage-ment Plan for:• D esigning in reliability by establishing electrical rules based on wear out mechanism characterization performed on specially designed test structures (electromigration, TDDB, hot carriers, bias temperature instability and radiation).• Utilizing a structured and controlled design process.• S tatistically controlling wafer fabrication process with a continuous defect reduction process.• P erforming individual wafer lot acceptance through process monitor testing (includes radiation testing).• Using characterized and qualified packages.• P erforming thorough product testing program basedon MIL-PRF-38535 and MIL-STD 883.Screening and Conformance InspectionThe product test flow includes screening units with the applicable flow (Engineering Model, QML V, QML Q, Class V and Q equiva-lent) and the appropriate periodic or lot conformance testing (Groups A, B, C, D, and E). Both the wafer process and the prod-ucts are subject to periodic or lot based Technology Conformance Inspection (TCI) and Quality Conformance Inspection (QCI) tests as defined by Honeywell’s Quality Management Plan. Conformance SummaryPackage Outline Dimensions6Signal IntegrityAs a general design practice, for digital input signals, one should have good signal integrity which means input signals that are free of noise, glitches and ringing with rising and falling edges of ≤10ns. More specifically, an input is considered to have good signal integrity when the input voltage monotonically traverses the region between VIL and VIH in ≤10ns.Floating inputs for an extended period of time is not recommended.Honeywell Aerospace Honeywell 12001 Highway 55Plymouth, MN 55441Tel: 800-323-8295/ADS-14204 Rev A June 2014© 2014 Honeywell International Inc.Find out moreTo learn more about Honeywell’s radiation hardened integrated circuit products and technologies, visit/Honeywell reserves the right to make changes of any sort without notice to any and all products, technology and testing identified herein. You are advised to consult Honeywell or an authorized sales representative to verify that the information in this data sheet is current before ordering this product. Absent express contract terms to the contrary, Honeywell does not assume any liability of any sort arising out of the application or use of any product or circuit described herein; nor does it convey any license or other intellectual property rights of Honeywell or of third parties.QCI Testing (1)(1) Q CI groups, subgroups and sample sizes are defined in MIL -PRF38535 and the Honeywell Quality Management Plan. Quarterly testing is done in accordance with the Honeywell QM Plan.(2) If customer requires lot specific testing, the purchase order must indicate specific tests and sample sizes.Ordering Information(1) Orders may be faxed to 763-954-2051. Please contact our Customer Service Representative at 1-763-954-2474 for further information.(2) E ngineering Device Description: Parameters are tested -55°C to 125°C, 24 hour burn-in, no radiation hardness guaranteed. Screen Level and Total Dose Hardnesscodes must be “E” and “N” respectively.Process X = SOI CMOS Screen Level V = QML V W = QML Q+E = Eng. Model (2)Source H = HoneywellPackage Designation G = 16 Pin Flat PackTotal Dose Hardness F = 3x105 rad (Si)N = No Level Guaranteed (2)Part Type R = ReceiverPart NumberStandard Microcircuit DrawingThe HXLVDSR can be ordered under the SMD drawing 5962-07A03.。
北京赛斯维测控技术有限公司MP系列工业型LVDT产品说明说明书
• • • •应用选件产品说明特点ＭＰ系列适用恶劣环境法兰安装与所有Ｓｃｈａｅｖｉｔｚ型号处理设备相兼容• • • 全密闭封装，适用于恶劣的环境法兰安装螺丝接线柱与Ｓｃｈａｅｖｉｔｚ信号处理设备兼容所有产品均附有校准证• • 适用于恶劣工业环境５ ＫＨｚ激励频率测试公制螺纹铁芯小直径／轻质铁芯••• ＭＰ系列ＬＶＤＴ适用于重工业环境。
它的线圈采用经阳极氧化处理的挤压铝外壳密封，可以抗电磁和静电干扰。
坚固的金属接线板代替了导线。
聚四氟乙烯内衬套是标准配件。
性能参数输入电压频率范围工作温度零点电压耐受冲击振动允限线圈材料外壳材料电气连接３Ｖｒｍｓ（标称）４００Ｈｚ至５ＫＨｚ－６５℉～３００℉（－５５℃～１５０℃）＜０．５％ＦＳ１０００ｇ／１１毫秒２０ｇ／２ＫＨｚ高密度玻璃填充聚合物经阳极氧化铝处理的铝２．５ＫＨｚ时的性能和电气规格型号 线性量程 线性度（±％Ｆ．Ｒ．） ｍＶ／Ｖ每 欧姆 差型号 英寸 毫米 ０．０１英寸 毫米 初级 次级 度所有校准均在室温下执行。
５０ １００ １２５ １５０＊要求特殊的缩减铁芯。
６针接线端子ＭＰ系列标称 灵敏度 阻抗 相位500 MP ±0.500 ±12.70 0.150.25 0.35 0.75 0.7 25.6 460 375 -1 1000 MP ±1.00 ±25.4 0.25 0.25 1.00 1.30* 0.39 14.2 460 320 -3 2000 MP ±2.00 ±50.8 0.25 0.25 0.50* 1.00* 0.23 8.3 330 330 +5 3000 MP ±3.00 ±76.2 0.15 0.25 0.50* 1.00* 0.25 9.1 315 830 +11 4000 MP ±4.00 ±101.6 0.15 0.25 0.60* 1.00* 0.20 7.1 275 550 +1 5000 MP ±5.00 ±127.0 0.15 0.25 1.00* n/v 0.14 5.5 310 400 +3 10000 MP±10.0±2540.150.251.00*n/r0.072.8550750-5布线产品尺寸机械性能型号 主体铁芯Ａ（主体）Ｂ（铁芯）ＭＰ系列 重量尺寸型号 盎司克 英寸 毫米 盎司克 英寸 毫米 500 MP 12.36 350 0.64 18 6.50 165.1 3.45 87.6 1000 MP 16.59 470 0.74 21 7.64 194.1 4.00 101.6 2000 MP 21.00 595 0.95 27 11.01 279.7 5.30 134.6 3000 MP 26.12 740 0.99 28 13.85 351.8 5.60 142.2 4000 MP 31.77 900 1.27 36 16.68 423.7 7.00 177.8 5000 MP 36.18 1025 1.27 36 18.92 480.6 7.00 177.8 10000 MP60.8917251.524331.90810.38.50215.9The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to themanufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.联系方式Measurement Specialties Inc.1000 Lucas Way Hampton,VA 23666Tel: 1-757-766-1500Fax: 1-757-766-4297Sales: ***************************105 av.Du General EisenhowerBP 23705,31037 Toulouse,Cedex 1,France Tel: +33 561-194-824Fax: +33 561-194-553Sales: *************************中国北美 欧洲 北京赛斯维测控技术有限公司北京市朝阳区望京西路４８号金隅国际Ｃ座１００２电话：＋８６ ０１０ ８４７７ ５６４６传真：＋８６ ０１０ ５８９４ ９０２９邮箱：******************MEAS Europe产品选型指定ＭＰ型号以及所需选件编号。
SN65LVDS048PWR中文资料
PACKAGING INFORMATIONOrderable Device Status (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)SN65LVDS048D OBSOLETE SOIC D 16TBD Call TI Call TI SN65LVDS048DR OBSOLETE SOIC D 16TBD Call TI Call TI SN65LVDS048PW OBSOLETE TSSOP PW 16TBD Call TI Call TI SN65LVDS048PWROBSOLETETSSOPPW16TBDCall TICall TI(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS)or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracyof such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.PACKAGE OPTION ADDENDUM30-Mar-2005Addendum-Page 1IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
65红外触摸电视控标参数
对多余的误操作可以用撤销进行恢复。也可以相反操作。
1.更改背景颜色，颜色可以由用户自定义。2.使用纹理作为背景，各种格子如田字格、拼音格、五线谱等等教学格式。3.可以用图 背景、纹理
片文件作为背景。
保存 截图
批注模式
模式（一）
全屏模式 窗口模式 桌面鼠标 模式 打印
一键切换到电脑桌面
1.打印预览；2.打印整个文件所有页面
发送电子 邮件
将当前文件所有页面内容作为 ibd、PPT 或 PDF 等格式文件，然后当做邮件的附件进行发送
模式（二）
操作
多点 触控
快捷键
演示功能
1.聚光灯：用于演示的全屏聚光效果； 2.帘幕：遮挡全屏大部分区域的帘幕； 3.放大镜：可进一步设置放大效果的放大镜，可以放大电脑内所有软件和文档； 4.录像：不仅可以录制电子白板软件的操作，还可以录制电脑内其他软件的操作，而且接上麦克风还可以将语音录制下来，存为 avi 视频文件进行保存，便于今后播放；
鼠标双击 快速双击白板同一点
双指 双手
漫游操作 双手可放大、缩小、旋转图形
可两人同时在上面书写。此项为选项。非标准配置。
屏幕显示快捷键，包涵最常用的功能，便于快速选择功能进行操作
教学资源库
支持开放式，适合中学各学科教学用途的资源，并可增加内容和扩展学科资源。
特别要求
每台机器都要安装好适用的 Windows 平台和具有上述功能的触控软件。触摸屏生产厂家通过 ISO9000、ISO14000 认证，必须提 供证书复印件。 触摸屏产品必须通过 CE、FCC、ROHS 认证（须提供认证证书复印件）,自主创新产品认证，国家高新技术企业。 软件部分必须具有独立知识产权，需提供产品底层控制软件著作权证书，软件著作权证书 ,加盖制造商公章。
SN65LVDS150PW资料
PACKAGING INFORMATIONOrderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)SN65LVDS150PW ACTIVE TSSOP PW 2850None CU NIPDAU Level-2-220C-1YEAR SN65LVDS150PWRACTIVETSSOPPW282000NoneCU NIPDAULevel-2-220C-1YEAR(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -May not be currently available -please check /productcontent for the latest availability information and additional product content details.None:Not yet available Lead (Pb-Free).Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean "Pb-Free"and in addition,uses package materials that do not contain halogens,including bromine (Br)or antimony (Sb)above 0.1%of total product weight.(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing orchemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.PACKAGE OPTION ADDENDUM11-Feb-2005Addendum-Page 1IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
美国电器品牌LG的Series4无凝冰底部冰箱KGN36VLED的产品说明书
Series 4, free-standing fridge-freezer with freezer at bottom, 186 x 60 cm, Stainless steel lookKGN36VLED The NoFrost bottomfreezer with VitaFresh: Keeps your fresh foods fresh longer.• VitaFresh: keeps food fresh for longer in climate controlled drawers at near <0°C>.• Perfect Fit: place your fridge right next to walls or in a niche.• LED interior light: Illuminates the refrigerator evenly and glare-free, and lasts for its entire life.• Automatic Super Freezing function: optimal for freezing smaller food load faster whilst protecting your frozen items from defrosting, thanks to the detection of temperature increase and the automatic decrease of temperature• Easy Access Shelf: pull-out glass shelf gives you better access to the contents of your fridge.Energy Efficiency Class (Regulation (EU) 2017/1369): .....................E Average annual energy consumption in kilowatt hour per year(kWh/a) (EU) 2017/1369: ..........................................238 kWh/annum Sum of volume of frozen compartments (EU 2017/1369): ............89 l Sum of volume of chill- and unfrozen compartments (EU 2017/1369): ....................................................................................................237 l Airborne acoustical noise emissions (EU 2017/1369): .39 dB(A) re 1 pWAirborne acoustical noise emission class (EU 2017/1369): ..............C Built-in / Free-standing: .................................................Free-standing Number of compressors: . (1)Number of independent cooling systems: (2)Width of the appliance: ..........................................................600 mm Height: .................................................................................1860 mm Depth of the product: ............................................................660 mm Net weight: ..............................................................................67.0 kg Door panel options: ........................................................Not possible Door hinge: ................................................................Right reversible Number of Adjustable Shelves in fridge compartment: (2)Shelves for Bottles: .......................................................................Yes Frost free system: ...................................................................Freezer Interior ventilator: ..........................................................................No Reversible Door Hinge: ..................................................................Yes Length electrical supply cord: ..............................................240.0 cm Noise level: ..............................................................39 dB(A) re 1 pW Multi-Flow Air Tower: ....................................................................Yes Fast cooling switch: .......................................................................Yes Fast freezing switch: ......................................................................Yes Temperature Controlled Drawer: ....................................................No Humidity Control Drawer: ...............................................................No Number of Door Bins - Refrigerator: .. (3)Door bin adjustability - Refrigerator: .............................................Yes Tilt-out door bins in fridge: ............................................................Yes Gallon wide door bins: ..................................................................Yes Number of Gallon storage: . (1)Motorized Shelf: .............................................................................No Material ofthe shelves: .....................................................Safety glass Door opened indicator freezer: .......................................................No Automatic motor-driven ice-maker: .................................................No Connection rating: ....................................................................100 W Fuse protection: ...........................................................................10 A Voltage: ...............................................................................220-240 V Frequency: .................................................................................50 Hz Storage Period in Event of Power Failure (h): ..............................13 h Door panel options: ........................................................Not possible Noise level: ..............................................................39 dB(A) re 1 pW Energy Star Qualified: .....................................................................No Plug type: .......................................................Gardy plug w/ earthing Required cutout/niche size for installation (in): .. (x)Gross weight: ...................................................................162.000 lbsSeries 4, free-standing fridge-freezerwith freezer at bottom, 186 x 60 cm, Stainless steel lookKGN36VLEDThe NoFrost bottomfreezer with VitaFresh: Keeps your fresh foods fresh longer. Performance and consumptionDesign and Styling- Doors Stainless steel look, side panels Pearl grey (VZF 07127)- Integrated vertical handle- LED with Soft Start in fridge sectionConvenience & Safety- NoFrost - never again defrosting!- Separate, electronic temperature control, LED indicators- Two Cooling Systems- Super Cooling: automatic deactivation- Optical and acoustic door open warning system- Visual / acousticFridge Compartment- Multi Airflow-System- Temperatur indikator (inside)- 4 safety glass shelves (2 height adjustable), of which 3 x EasyAccess Shelf, extendable- Bottle grid- 1 door shelf large, 2 door shelf smallFreshness System- 1 VitaFresh drawer with humidity control - Fruits and vegetables retain vitamins and stay fresh for longer.- , 1 VitaFresh 0°C drawer - Fish and meat stay fresh for longer Freezer Section- 3 transparent freezer drawersDimensions- Dimensions ( H x W x D): 186.0 cm x 60.0 cm x 66.0 cmTechnical Information- Door right hinged, reversible- Height adjustable front feet- Connected load: 100 W- Nominal voltage: 220 - 240 VAccessories- egg tray- ice cube trayCountry Specific Options- Based on the results of the standard 24-hour test. Actual consumption depends on usage/position of the appliance.- To achieve the declared energy consumption, the attached distanceholders have to be used. As a result, the appliance depth increases by about 3.5 cm. The appliance used without the distance holder is fully functional, but has a slightly higher energy consumption.Environment and Safety InstallationGeneral Information- Vario Zone - removable glass shelves for extra space- Super Freezing: Manual/automatic activiation- 4 safety glass shelves of which 2 are height adjustable, 3 x EasyAccess Shelf, extendable- Freezing possible in all freezer compartmentsSeries 4, free-standing fridge-freezer with freezer at bottom, 186 x 60 cm, Stainless steel lookKGN36VLED。
SN65LVDS387_07中文资料
OYOZODt – Time – nsFigure 13heightPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN65LVDS387DGG ACTIVE TSSOP DGG6425Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS387DGGG4ACTIVE TSSOP DGG6425Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS387DGGR ACTIVE TSSOP DGG642000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS387DGGRG4ACTIVE TSSOP DGG642000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS389DBT ACTIVE SM8DBT3850Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS389DBTG4ACTIVE SM8DBT3850Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS389DBTR ACTIVE SM8DBT382000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS389DBTRG4ACTIVE SM8DBT382000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN65LVDS391D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391DG4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391DRG4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391PW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391PWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391PWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65LVDS391PWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS387DGG ACTIVE TSSOP DGG6425Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS387DGGG4ACTIVE TSSOP DGG6425Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS387DGGR ACTIVE TSSOP DGG642000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS387DGGRG4ACTIVE TSSOP DGG642000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS389DBT ACTIVE SM8DBT3850Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS389DBTG4ACTIVE SM8DBT3850Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS389DBTR ACTIVE SM8DBT382000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS389DBTRG4ACTIVE SM8DBT382000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN75LVDS391D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN75LVDS391DG4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS391DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS391DRG4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS391PW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS391PWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS391PWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75LVDS391PWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and todiscontinue any product or service without notice. Customers should obtain the latest relevant informationbefore placing orders and should verify that such information is current and complete. All products are soldsubject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extentTI deems necessary to support this warranty. Except where mandated by government requirements, testingof all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsiblefor their products and applications using TI components. To minimize the risks associated with customerproducts and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patentright, copyright, mask work right, or other TI intellectual property right relating to any combination, machine,or process in which TI products or services are used. Information published by TI regarding third-partyproducts or services does not constitute a license from TI to use such products or services or a warranty orendorsement thereof. Use of such information may require a license from a third party under the patents orother intellectual property of the third party, or a license from TI under the patents or other intellectualproperty of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices.Reproduction of this information with alteration is an unfair and deceptive business practice. TI is notresponsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI forthat product or service voids all express and any implied warranties for the associated TI product or serviceand is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotive/broadbandBroadbandDSP DigitalControl /digitalcontrol Interface Military /military Logic Power Mgmt Optical Networking /opticalnetworkSecurity /security Microcontrollers Low Power Wireless /lpw Telephony /telephonyVideo & Imaging /video/wirelessWirelessMailing Address: Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright © 2007, Texas Instruments Incorporated。
湖南三德科技热值分析系列产品说明书
官方微信官方网站目 录SDAC6000(u)量热仪SDACM4000量热仪SDACM3100量热仪SDC712量热仪SDC715量热仪01-05热值分析系列020*********-11元素分析系列SDCHN536碳氢氮元素分析仪SDCH536红外碳氢仪SDH536红外测氢仪SDS350红外定硫仪SDS820自动定硫仪SDS720自动定硫仪SDS-V 定硫仪SDFCl3000自动氟氯分析仪SDFCl1000(a)氟氯分析仪070707080909101111SDTGA8000(a)工业分析仪SDTGA6000工业分析仪SDTGA6000A 工业分析仪SDTGA6000V 工业分析仪SDTGA5000a 工业分析仪SDTGA520(a)水分测试仪SDTGA500光波水分测试仪SDIMF200智能马弗炉SDMF300马弗炉SDIDB413智能干燥箱SDDH315通氮鼓风干燥箱SDDH323鼓风干燥箱SDDH313鼓风干燥箱SDDH306鼓风干燥箱12-22成分分析系列1314151516171819202121222222SDAF105（a /b ）灰熔融性测试仪SDAF4000灰熔融性测试仪SDHG60a 哈氏可磨性指数测定仪23-26物理特性分析系列242526S DUC3150（D ）联合制样机S DHD150t 锤式破碎缩分机S DHC锤式破碎机S DJC颚式破碎机S DRC对辊破碎机S DHCW400×260湿煤破碎机S DPP制样粉碎机S DMD16自动机械缩分器S DNS300环保振筛机S DNS200a标准振筛机S DRD二分器采制样辅助工具30-38样品制备系列313232333334343535353637-38激光盘料仪系列SDLM200便携式激光盘料仪SDLM1250固定式激光盘料仪39-41404142-43公司简介44发展历程45运维服务2829S DVD25风透 式快速除湿干燥系统S DVD3mm 风透 干燥机27-29风透 式低温快速除湿干燥系列热值分析系列适用范围符合标准GB/T213-2008GB/T384-1981 GB/T30727-2014ASTM D5865-2007ISO 1928-2009 JC/T1005-2006《煤的发热量测定方法》《石油产品热值测定法》《固体生物质燃料发热量测定方法》《煤与焦炭总热值的标准试验方法》《固体矿物燃料-氧弹式量热计测定总值并计算净热值》《水泥黑生料发热量测定方法》三德科技是中国第一台自动量热仪(1996年)的发明者，先后自主研发出6代量热仪，缔造了2个“国家重点新产品”。
4层板制造说明(中文版)1
制织
出 荷
玻璃布种类
IPC規格类型 PP厚度 玻璃纤维厚度 玻璃纤维直径 玻璃纤维聚焦数 线密度（垂直/水平） － μｍ μｍ μｍ 本 本 １０８０ ６０ ５０ ５ ２００ ６０/４７ ２１１６ １００～１２ ０ ９０ ７ ２００ ６０/５８ ７６２８ ２００ １７０ ９ ４００ ４４/３２
制箔工程
厚度以１８µｍ（１/２盎司)､３５µｍ（１盎司)､７０µm(２盎司)为 信号用 ：１８µｍ､３５µｍ 電源層用：３５µｍ､７０µｍ
シャイニー面（平滑面）
表面処理工程 表面粗化
マット面（粗化面）
材料分割工程
Sony Chemicals Corporation
印刷基板制造过程说明
4层贯通基板编 层贯通基板编
ANSI ：美国規格協会規格（American National Standard Institute ,Inc.） NEMA ：美国電機工業規格（National Electrical Manufactures Association）
Sony Chemicals Corporation
印刷配线板材料说明－② 印刷基板材料
在銅張積層板的銅箔上形成导体的模式。
Sony Chemicals Corporation
回路形成工程－前処理
前処理～水洗
层压板 曝光/反转/曝光 剥离薄膜 現像～水洗
蚀镂术～水洗
剥離～水洗～乾燥
処理前銅箔表面
処理後銅箔表面
为了提升阻焊剂的紧贴性，去除铜表面的污垢，进行适度的凹凸处理。
Sony Chemicals Corporation
Sony Chemicals Corporation
开孔工程－②
维士赫（Vishay）光电分离器说明书
Document Number: 83647Fortechnicalquestions,contact:******************************Optocoupler, Phototransistor Output,Dual Channel, SOIC-8 packageILD205T/206T/207T/211T/213T/217TVishay SemiconductorsDESCRIPTIONThe ILD205T/206T/207T/211T/213T/217T are optically coupled pairs with a Gallium Arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD205T/206T/207T/211T/213T/217T come in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices.A specified minimum and maximum CTR allows a narrow tolerance in the electrical design of the adjacent circuits. The high BV CEO of 70 V gives a higher safety margin compared to the industry standard of 30 V.FEATURES•Two channel coupler•SOIC-8 surface mountable package•Standard lead spacing of 0.05"•Available only on tape and reel option (conforms to EIA standard 481-2)•Isolation test voltage, 4000 V RMS•Compatible with dual wave, vapor phase and IR reflow soldering •Lead (Pb)-free component•Component in accordance to RoH S 2002/95/EC and WEEE 2002/96/ECAGENCY APPROVALS•UL1577, file no. E52744 system code Y•CUL - file no. E52744, equivalent to CSA bulletin 5A •DIN EN 60747-5-2 (VDE 0884) available with option 1ORDER INFORMATIONPART REMARKS ILD205T CTR 40 to 80 %, SOIC-8ILD206T CTR 63 to 125 %, SOIC-8ILD207T CTR 100 to 200 %, SOIC-8ILD211T CTR > 20 %, SOIC-8ILD213T CTR > 100 %, SOIC-8ILD217TCTR > 100 %, SOIC-8 Fortechnicalquestions,contact:******************************Document Number: 83647ILD205T/206T/207T/211T/213T/217TVishay SemiconductorsOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 packageNotes (1)T amb = 25 °C, unless otherwise specified.Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.(2)Refer to reflow profile for soldering conditions for surface mounted devices.NoteT amb = 25 °C, unless otherwise specified.Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements.ABSOLUTE MAXIMUM RATINGS (1)PARAMETER TEST CONDITIONSYMBOLVALUEUNITINPUTPeak reverse voltage V R6V Peak pulsed voltage1 µs, 300 pps1A Continuous forward current per channel 30mA Power dissipation P diss50mW Derate linearly from 25 °C 0.66mW/°COUTPUTCollector emitter breakdown voltage BV CEO 70V Emitter collector breakdown voltage BV ECO 7V Power dissipation per channel P diss125mW Derate linearly from 25 °C 1.67mW/°CCOUPLERIsolation test voltaget = 1 sV ISO 4000V RMS Total package dissipation ambient (2 LEDs and 2 detectors, 2 channels)P tot300mW Derate linearly from 25 °C 4mW/°C Storage temperature T stg - 55 to + 150°C Operating temperature T amb - 55 to + 100°C Soldering time from 260 °C (2)T sld10sELECTRICAL CHARACTERISTCSPARAMETER TEST CONDITIONPARTSYMBOLMIN.TYP.MAX.UNITINPUTForward voltage I F = 10 mA V F 1.2 1.55V Reverse current V R = 6 V I R 0.1100µA Capacitance V R = 0 VC O25pFOUTPUTCollector emitter breakdown voltage I C = 10 µA BV CEO 70V Emitter collector breakdown voltage I E = 10 µA BV ECO 7V Collector emitter leakage current V CE = 10 V, I F = 0 AI CEO 550nA Collector emitter capacitance V CE = 0 VC CE10pFCOUPLERCollector emitter saturation voltage I F = 10 mA, I C = 2.5 mAV CEsat 0.4V Capacitance (input to output)C IO 0.5pF Resistance (input to output)R IO100G ΩDocument Number: 83647Fortechnicalquestions,contact:******************************ILD205T/206T/207T/211T/213T/217TOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 packageVishay SemiconductorsNoteAs per IEC60747-5-2, §7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits.CURRENT TRANSFER RATIOPARAMETERTEST CONDITIONPART SYMBOL MIN.TYP.MAX.UNIT DC current transfer ratioV CE = 5 V, I F = 10 mAILD205T CTR DC 4080%ILD206TCTR DC 63125%ILD207T CTR DC 100200%ILD211T CTR DC 20%ILD213T CTR DC 100%V CE = 5 V, I F = 1.0 mAILD205TCTR DC 1330%ILD206T CTR DC 2245%ILD207T CTR DC 3470%ILD217TCTR DC100120%SWITCHING CHARACTERISTICSPARAMETER TEST CONDITION PARTSYMBOLMIN.TYP.MAX.UNIT Turn-on time I C = 2 mA, R L = 100 Ω,V CC = 5 V t on 5µs Turn-off timeI C = 2 mA, R L = 100 Ω,V CC = 5 Vt off4µsSAFETY AND INSULATION RATINGSPARAMETERTEST CONDITIONSYMBOLMIN.TYP.MAX.UNITClimatic classification(according to IEC 68 part 1)55/100/21Comparative tracking index CTI175399V IOTM 6000V V IORM 560V P SO 350mW I SI 150mA T SI165°C Creepage 4mm Clearance4mm Insulation thickness, reinforced ratedper IEC60950 2.10.5.10.2mm Fortechnicalquestions,contact:******************************Document Number: 83647ILD205T/206T/207T/211T/213T/217TVishay SemiconductorsOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 packageTYPICAL CHARACTERISTICST amb = 25°C, unless otherwise specifiedFig. 1 - Forward Current vs. Forward VoltageFig. 2 - Collector Emitter Current vs. V CEFig. 3 - Normalized CTR CE vs. Forward CurrentFig. 4 - Current Transfer Ratio (normalized) vs.Ambient TemperatureFig. 5 - Switching Speed vs. Load ResistorFig. 6 - Collector Current vs. Ambient TemperatureDocument Number: 83647Fortechnicalquestions,contact:******************************ILD205T/206T/207T/211T/213T/217TOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 packageVishay SemiconductorsFig. 7 - Power Dissipation vs. Ambient TemperatureFig. 8 Switching Test CircuitILD205T/206T/207T/211T/213T/217TVishay Semiconductors Optocoupler, Phototransistor Output,Dual Channel, SOIC-8 packagePACKAGE DIMENSIONS in inches (millimeters) Fortechnicalquestions,contact:******************************Document Number: 83647ILD205T/206T/207T/211T/213T/217TOptocoupler, Phototransistor Output,Vishay SemiconductorsDual Channel, SOIC-8 packageOZONE DEPLETING SUBSTANCES POLICY STATEMENTIt is the policy of Vishay Semiconductor GmbH to1.Meet all present and future national and international statutory requirements.2.Regularly and continuously improve the performance of our products, processes, distribution and operating systems withrespect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs).The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.1.Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.2.Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency(EPA) in the USA3.Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.We reserve the right to make changes to improve technical designand may do so without further notice.Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use.Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, GermanyDocument Number: 83647Fortechnicalquestions,contact:******************************Disclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.Document Number: 。
维纳斯电子产品技术文件说明书
TITLECUSTOMER DRAWINGITEM REVISION NAMEDATASET FILE NAMEMATERIAL:UNLESS OTHERWISE SPECIFIED,DIMENSIONAL TOLERANCES ARE: mm [IN]DRAWING NUMBER:THIRD ANGLEPROJECTION DATECHKSCALESIZEBYTolerance(mm)0<L≤50 ±0.550<L≤250 ±1.0250<L≤500 ±1.5500<L≤1000 ±2.51000<L≤2000 ±4.0PRINTDATE WE ASK THAT YOU CHECK FULLY THEDIMENSIONS, NOTES, AND SIGNTHE CLIENT SIGNATUTE BOX.THE JOB WILL NOT PROGRESS WITHOUT SIGNED APPROVAL. PLEASE DO NOT DELAY IN RETURNING PROOF AS IT WILL AFFECT DELIVERY.SIGN 1750.068.90B1WHITEB2LIGHT GRAYB3DARK GRAYB4WHITEB5LIGHT GRAYB6DARK GRAYFRONT VIEWB1B2B3B5B4B6UNIVERSALINPUT CONNECTORPRODUCT LABEL40.51.59(2)PL 24.0.941555.061.22(4)PL 48.01.89RIGHT VIEWHIGH LEAKAGE CURRENT WARNING LABEL1555.061.22(2)PL18.4.7240.51.59(2)PL 24.0.94REAR VIEWTOOLLESS MOUNTINGBUTTON LOCATIONS (12)PL40.51.5955.02.17(2)PL 24.0.941555.061.22(4)PL 48.01.89119.84.72LEFT VIEW56.02.2075.02.95BOTTOM VIEWPLUGUNIVERSAL INPUT CONNECTOR 50A MAX RATED INPUTRECEPTACLEIEC C13/C15 COMBO10A, 250V MAX RATED OUTPUTRECEPTACLEIEC C13/C15/C19 COMBO16A, 250V MAX RATED OUTPUTPLUG/RECEPTACLE BLOCKSPECIFICATION:1. STANDARDUNIT TYPE: MONITORED, SWITCHED ORIENTATION: VERTICAL, 0UOUTLET QTY & TYPE: (18)C13/C15, (18)C13/C15/C19BREAKER QTY & TYPE: (6) 20AMP, DOUBLE-POLE, 10kAIC REGULATORY STANDARD: RoHSINPUT VOLTAGE: PER INPUT CORD (REF SHEET 3) INPUT CURRENT: PER INPUT CORD (REF SHEET 3) INPUT PHASE: PER INPUT CORD (REF SHEET 3) RATED POWER: PER INPUT CORD (REF SHEET 3)2. ADDITIONAL:CIRCUIT BREAKERS RATED AT 10kAIC PER UL489 AND IEC 60947-2INPUT CORD NOT INCLUDED WITH PDU. SEE SHEET 3 OF 3 FOR AVAILABLE INPUT CORDSPDU DESIGNED TO ACCEPT PANDUIT INPUT CORD UPDUCRD*INPUT CORD, WHEN INSTALLED, WILL BE ROUTED TOWARDS THE BOTTOM OF THE PDU WHEN INSTALLED VERTICALLY INSIDE OF THE CABINET 3. ACCESSORIES:(1) QUICK-START GUIDENOTES :1. PRIMARY DIMENSIONS ARE IN MILLIMETERS. SECONDARYDIMENSIONS ARE IN [INCHES]2. INSTALLATION SHALL COMPLY WITH ALL APPLICABLE NATIONAL, STATE, AND LOCAL CODES3. VISIT OUR ON-LINE CATALOG AT FOR A CURRENT LIST OF PRODUCTS APPLICABLE FOR USE WITH THIS PRODUCT4. FOR FULL PRODUCT FUNCTIONALITY REFER TO USER MANUAL PANDUIT P/N WEIGHT SEE SHEET 2SEE SHEET 2BABTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.RELEASED TO PRODUCTIONP36E50M-XXYZP36E50M-XXYZ_DCN/AP36E50M-XXYZINTELLIGENT SERIES PDUAP36E50M-XXYZ A. ADDED ADDITIONAL NOTE "INPUT CORD NOT INCLUDED WITH PDU. SEE SHEET 3 OF 3 FOR AVAILABLE INPUT CORD6" B. ADDED SHEET 3 OF 3 INPUT CORD SPECIFICATION(S)MJD MIM LJB 7/4/202202A 2/17/2022MJD MIM LJB 01A 03A 10/20/2022 LJB MIM MJD A . MOVED THE LOCKING LEVER FROM THE UPDU INTERCONNECT TO THE PDU MATING CONNECTORB . UPDATE THE PART NUMBER TABLE ELECTRICAL PARAMETERS P36E50M-XXYZTITLECUSTOMER DRAWINGITEM REVISION NAMEDATASET FILE NAMEMATERIAL:UNLESS OTHERWISE SPECIFIED,DIMENSIONAL TOLERANCES ARE: mm [IN]DRAWING NUMBER:THIRD ANGLEPROJECTION DATECHKSCALESIZEBYTolerance(mm)0<L≤50 ±0.550<L≤250 ±1.0250<L≤500 ±1.5500<L≤1000 ±2.51000<L≤2000 ±4.0PRINTDATE WE ASK THAT YOU CHECK FULLY THEDIMENSIONS, NOTES, AND SIGNTHE CLIENT SIGNATUTE BOX.THE JOB WILL NOT PROGRESS WITHOUT SIGNED APPROVAL. PLEASE DO NOT DELAY IN RETURNING PROOF AS IT WILL AFFECT DELIVERY.SIGN FINISHED GOOD PART NUMBER FINISHED GOOD DESCRIPTION COLOR WEIGHTP36E50M MS PDU, VERTICAL, 50AMP, (18)C13/C15, (18)C13/C15/C19, UNIVERSAL INPUT CONNECTOR, NO POWER CORD, TOP-FRONT FED, BLACK, NCNR BLACK (RAL 9005)12.3kgBABRELEASED TO PRODUCTIONP36E50M-XXYZP36E50M-XXYZ_DCN/AP36E50M-XXYZINTELLIGENT SERIES PDUAP36E50M-XXYZ A. ADDED ADDITIONAL NOTE "INPUT CORD NOT INCLUDED WITH PDU. SEE SHEET 3 OF 3 FOR AVAILABLE INPUT CORD6" B. ADDED SHEET 3 OF 3 INPUT CORD SPECIFICATION(S)MJD MIM LJB 7/4/202202A LJB MIM MJD 2/17/202201A 03A 10/20/2022 LJB MIM MJD P36E50M-XXYZ A . MOVED THE LOCKING LEVER FROM THE UPDU INTERCONNECT TO THE PDU MATING CONNECTORB . UPDATE THE PART NUMBER TABLE ELECTRICAL PARAMETERSTITLECUSTOMER DRAWINGITEM REVISION NAME DATASET FILE NAMEMATERIAL:UNLESS OTHERWISE SPECIFIED,DIMENSIONAL TOLERANCES ARE: mm [IN]DRAWING NUMBER:THIRD ANGLEPROJECTION DATECHKSCALESIZEBYTolerance(mm)0<L≤50±0.550<L≤250±1.0250<L≤500±1.5500<L≤1000±2.51000<L≤2000±4.0PRINTDATE WE ASK THAT YOU CHECK FULLY THEDIMENSIONS, NOTES, AND SIGNTHE CLIENT SIGNATUTE BOX.THE JOB WILL NOT PROGRESS WITHOUT SIGNED APPROVAL. PLEASE DO NOT DELAY IN RETURNING PROOF AS IT WILL AFFECT DELIVERY.SIGN INPUT PLUGINPUT POWER CORDELECTRICAL SHOCK WARNING LABELUPDU INTERCONNECTINPUT CORD LENGTH3M+254MM/-127MM[10'(+10"/-5")]PRODUCT LABELNOTES:1.ELECTRICAL SHOCK WARNING LABEL TO BE PER THE FOLLOWING SPECIFICATIONS: MATERIAL: POLYOLEFIN THICKNESS: 0.12[0.005"]COLOR: BLACK TEXT ON YELLOW BACKGROUND 2.ELECTRIC SHOCK WARNING LABEL TO BE PLACED WITHIN 25mm OF THE UPDU INTERCONNECT3.ELECTRICAL SHOCK WARNING LABEL TEXT TO STATE: ELECTRIC SHOCK HAZARD. EQUIPMENT MAY BE POWERED BY MULTIPLE SOURCES. DISCONNECT CONNECTOR ON THE RACK SIDE FIRST.Part Number DescriptionInput PlugInput VoltageInput CurrentInput PhaseRated Power Length Compliance Region UPDUCRD1UPDU to IEC 60309 3P+N+E 6h 32A (IP44), CORD SET, 3M (10FT)IEC 60309 3P+N+E 6h 32A (IP44)400/415VAC 32A/30A(24A DERATED)THREE PHASE(WYE)22.0kVA(EMEA)17.3kVA(NA)3M Dual Rated UPDUCRD2UPDU to IEC 60309 2P+E 6h 60A (IP44), CORD SET, 3M (10FT)IEC 60309 2P+E 6h 60A (IP44)208VAC 60A(48A DERATED)SINGLE PHASE 10kVA 3M North America UPDUCRD3UPDU to IEC 60309 3P+E 9h 60A (IP44), CORD SET, 3M (10FT)IEC 60309 3P+E 9h 60A (IP44)208VAC 60A(48A DERATED)THREE PHASE(DELTA)17.3kVA 3M North America UPDUCRD4UPDU to CS8365C 50A, CORD SET, 3M (10FT)CS8365C 50A208VAC50A(40A DERATED)THREE PHASE(DELTA)14.4kVA 3M North America UPDUCRD5UPDU to IEC 60309 3P+N+E 6h 63A (IP44), CORD SET, 3M (10FT)IEC 60309 3P+N+E 6h 63A (IP44)400/415VAC 63A/60A(48A DERATED)THREE PHASE(WYE)27.6kVA(EMEA)23.0kVA(NA)3M Dual Rated UPDUCRD6UPDU to IEC 60309 3P+N+E 6h 20A (IP44), CORD SET, 3M (10FT)IEC 60309 3P+N+E 6h 20A (IP44)400/415VAC 16A/20A(16A DERATED)THREE PHASE(WYE)11.0kVA(EMEA)11.5kVA(NA)3M Dual Rated UPDUCRD7UPDU to L6-30P 30A, CORD SET, 3M (10FT)NEMA L6-30P 30A 208VAC30A(24A DERATED)SINGLE PHASE 5.0kVA 3M North America UPDUCRD8UPDU to IEC 60309 2P+E 6h 20A (IP44), CORD SET, 3M (10FT)IEC 60309 2P+E 6h 20A (IP44)230/208VAC 16A/20A(16A DERATED)SINGLE PHASE 3.7kVA(EMEA)3.3kVA(NA)3M Dual Rated UPDUCRD9UPDU to IEC 60309 2P+E 6h 32A (IP44), CORD SET, 3M (10FT)IEC 60309 2P+E 6h 32A (IP44)230/208VAC 32A/30A(24A DERATED)SINGLE PHASE 7.3kVA(EMEA)5.0kVA(NA)3M Dual Rated UPDUCRD10UPDU to L21-30P 30A, CORD SET, 3M (10FT)NEMA L21-30P 30A 208VAC 30A(24A DERATED)THREE PHASE(WYE)8.6kVA 3M North America UPDUCRD11UPDU to L15-30P 30A, CORD SET, 3M (10FT)NEMA L15-30P 30A 208VAC 30A(24A DERATED)THREE PHASE(DELTA)8.6kVA 3M North America UPDUCRD12UPDU to CS8265C 50A, CORD SET, 3M (10FT)CS8265C 50A208VAC50A(40A DERATED)SINGLE PHASE8.3kVA3MNorth AmericaBABRELEASED TO PRODUCTION P36E50M-XXYZP36E50M-XXYZ_DCN/AP36E50M-XXYZINTELLIGENT SERIES PDUA02A 7/4/2022LJB MIM MJD A. ADDED ADDITIONAL NOTE "INPUT CORD NOT INCLUDED WITH PDU. SEE SHEET 3 OF 3 FORAVAILABLE INPUT CORD6" B. ADDED SHEET 3 OF 3 INPUT CORD SPECIFICATION(S)P36E50M-XXYZ MJD MIM LJB 2/17/202201A E L E C T R I C S H O C K H A Z A R D .E Q U I P M E N T M A Y B E P O W E R E D B YM U L T I P L E S O U R C E S . D I S C O N N E C T T H E I N P U T P L U G F R O M T H EP O W E R S O U R C E F I R S T .03A 10/20/2022 LJB MIM MJD P36E50M-XXYZ A . MOVED THE LOCKING LEVER FROM THE UPDU INTERCONNECT TO THE PDU MATING CONNECTORB . UPDATE THE PART NUMBER TABLE ELECTRICAL PARAMETERS。
杰威尔电热器说明书
© 2019, Twin-Star International,Inc. Delray Beach, FL 33445VOLTAGE 120 VAC, 60 HzAMPS 12.5 Amps WATTS1500 WattsPRODUCT SPECIFICATIONSMa nufa ctured a nd distributed by Twin-Sta r International, Inc., under license from Duraflame, Inc. duraflame, the flame symbol and logo are registered trademarks of Duraflame, Inc.Note: When first running the heater there may be an odor. This is normal as the heater has a surface coating on the internal parts. For the first several hours of operation, the coating reacts with the internal parts to permanently protect them. The odor is safe; if you are sensitive to the odor, it is recommendedto run the heater in a well-ventilated area until the odor dissipates.Warning: This is an unvented, electricappliance. DO NOT attempt to burn wood or manufactured firelogs in or on this appliance or grate.Go to for product warranty registrationRemoteThe manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations.1. Install and operate this Electric Fireplace in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.2. This warranty is non-transferable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the product.3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected to normal conditions of use and service, after said defect is confirmed by the manufacturer’s inspection.4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).5. Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement, or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility for same.6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or consequential loss or damage arising out of the use, or inability to use the product, except as provided by law.7. All other warranties – expressed or implied –with respect to the product, its components and accessories, or any obligations/liabilities on the part of the manu-facturer are hereby expressly excluded.8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other liabilities with respect to the sale of the product.9. The warranties as outlined within this document do not apply to non accessories used in conjunction with the installation of this product. 10.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.This warranty is void if:a. The fireplace is subjected to prolonged periods of dampness or condensation.b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.c. You do not have the original receipt of purchase.IF WARRANTY SERVICE IS NEEDEDContact the manufacturer by calling customer service department at 1-888-674-7517, 7 days a week 24 hours a day at our toll-free help line. Our Consumer Service department is available Monday – Friday 8:30 am – 5:30 pm EST. Make sure you have your warranty, your sales receipt, location of purchase and the model/serial number ofyour product.IMPORTANT INSTRUCTIONS1. The battery compartment is located on the back end of the remote control.2. Press and slide the battery door open and remove the old battery.3. Insert 2 AAA batteries, checking that the + and - sides of the battery match inside the battery compartment.4. Replace the battery compartment door.Caution:• For best results, use 2pcs AAA alkaline batteries.• Install only new batteries of the same type in your product.•Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak.• Do not mix old and new batteries.• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries.• Danger of explosion if battery is incorrectly replaced. • Do not ingest batteries.•Batteries should be recycled or disposed of as per state and local guidelines.DISPOSAL OF USED BATTERIESBattery may contain hazardous substances which could endanger the environment and human health. Used batteries shall not be treated as municipal waste, but left at the appropriate collection point for recycling. For more information about collection and recycling of used batteries, please contact your local municipality or waste disposal service.SA VE THESEINSTRUCTIONSBattery ReplacementWhen using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following:1. Read all instructions before using this appliance.2. DANGER – High temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct the front of this heater. WARNING: In order to avoid overheating, do not cover the heater.3. CAUTION: Never leave the heater operating unattended. Extreme caution is necessary if unsupervised children or invalids are nearby.4. The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.5. Always unplug this appliance when not in use.6. Do not operate any heater with a damaged cord or plug or after the appliancemalfunctions, or if it has been dropped or damaged in any manner.7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.8. Do not use outdoors.9. This heater is not intended for use in bathrooms, laundry areas and similarindoor locations. Never locate this appliance where it may fall into a bathtub or other water container.10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.11. To disconnect this appliance, turn controls to the off position, then remove plug from outlet.12. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the appliance.13. This appliance, when installed, must be electrically grounded inaccordance with local codes or, in the absence of local codes, withthe current CSA C22.1 Canadian Electrical Code or for U.S.A. installations, follow local codes and the National Electrical Code, ANSI/NFPA NO.70.14. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the appliance.15. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where opening may become blocked.16. This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored. This stove should not be used as a drying rack for clothing. Christmas stockings or decorations should not be hung in the area of it.17. Use this appliance only as described in the manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.18. Connect to properly grounded outlets only. This heater is for use on 120 volts.The cord has a plug as shown at A in Fig.1. Avoid the use of an extension cord because of the risk of overheating the cord and the risk of fire. Extension cords are for temporary use only. If an extension cord must be used, it must be UL/CSA certified, rated at 15A (1875W), 125V maximum with14AWG minimum and constructed of two current carrying conductors with ground. A heavy duty extension cord with the shortest length possible for the connection is recommended and must not be longerthan 50 ft. (15.2m ). Do not coil or cover the extension cord.1-YEAR LIMITED WARRANTYB69erly grounded outlets only, See Fig.1. Do not use a 2 prong adapters. Fig.1。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
OYOZODt – Time – nsFigure 13heightPACKAGING INFORMATIONOrderableDevice Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)SN65LVDS387DGG ACTIVE TSSOP DGG 6425Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS387DGGG4ACTIVE TSSOP DGG 6425Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS387DGGR ACTIVE TSSOP DGG 642000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS387DGGRG4ACTIVE TSSOP DGG 642000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS389DBT ACTIVE SM8DBT 3850Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS389DBTG4ACTIVE SM8DBT 3850Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS389DBTR ACTIVE SM8DBT 382000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS389DBTRG4ACTIVE SM8DBT 382000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN65LVDS391D ACTIVE SOIC D 1640Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391DG4ACTIVE SOIC D 1640Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391DR ACTIVE SOIC D 162500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391DRG4ACTIVE SOIC D 162500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391PW ACTIVE TSSOP PW 1690Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391PWG4ACTIVE TSSOP PW 1690Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391PWR ACTIVE TSSOP PW 162000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN65LVDS391PWRG4ACTIVE TSSOP PW 162000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS387DGG ACTIVE TSSOP DGG 6425Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS387DGGG4ACTIVE TSSOP DGG 6425Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS387DGGR ACTIVE TSSOP DGG 642000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS387DGGRG4ACTIVE TSSOP DGG 642000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS389DBT ACTIVE SM8DBT 3850Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS389DBTG4ACTIVE SM8DBT 3850Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS389DBTR ACTIVE SM8DBT 382000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS389DBTRG4ACTIVE SM8DBT 382000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN75LVDS391DACTIVESOICD1640Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM20-Apr-2007Orderable Device Status (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)SN75LVDS391DG4ACTIVE SOIC D 1640Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS391DR ACTIVE SOIC D 162500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS391DRG4ACTIVE SOIC D 162500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS391PW ACTIVE TSSOP PW 1690Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS391PWG4ACTIVE TSSOP PW 1690Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS391PWR ACTIVE TSSOP PW 162000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN75LVDS391PWRG4ACTIVETSSOPPW162000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free ofBromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.20-Apr-2007IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and todiscontinue any product or service without notice. Customers should obtain the latest relevant informationbefore placing orders and should verify that such information is current and complete. All products are soldsubject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extentTI deems necessary to support this warranty. Except where mandated by government requirements, testingof all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsiblefor their products and applications using TI components. To minimize the risks associated with customerproducts and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patentright, copyright, mask work right, or other TI intellectual property right relating to any combination, machine,or process in which TI products or services are used. Information published by TI regarding third-partyproducts or services does not constitute a license from TI to use such products or services or a warranty orendorsement thereof. Use of such information may require a license from a third party under the patents orother intellectual property of the third party, or a license from TI under the patents or other intellectualproperty of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices.Reproduction of this information with alteration is an unfair and deceptive business practice. TI is notresponsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI forthat product or service voids all express and any implied warranties for the associated TI product or serviceand is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotive/broadbandBroadbandDSP DigitalControl /digitalcontrol Interface Military /military Logic Power Mgmt Optical Networking /opticalnetworkSecurity /security Microcontrollers Low Power Wireless /lpw Telephony /telephonyVideo & Imaging /video/wirelessWirelessMailing Address: Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright © 2007, Texas Instruments Incorporated。