ECA0JM682中文资料

合集下载

ECEC1HA682CJ中文资料(panasonic)中文数据手册「EasyDatasheet - 矽搜」

200
25 40 3.1 0.55 ECEC1AA273CJ
200
30 30 3.1 0.55 ECEC1AA273DJ
200
10
35 25 3.1 0.55 ECEC1AA273EJ
200
33000 25 45 3.4 0.55 ECEC1AA333CJ
200
30 35 3.4 0.55 ECEC1AA333DJ
100
1800 22 25 1.5 0.25 ECEC1HA182BJ
200
30 25 2.9 0.45 ECEC1CA123DJ
200
15000 22 40 3.2 0.45 ECEC1CA153BJ
200
25 35 3.2 0.45 ECEC1CA153CJ
200
16
30 30 3.2 0.45 ECEC1CA153DJ
200
18000 22 45 3.5 0.45 ECEC1CA183BJ
铝电解电容器/ HA
n 标准产品
W.V. (V)
Cap. (±20%)
(µF) 10000
外壳尺寸
产品规格
Dia. (mm)
长短
涟当前
tan
(120Hz) (120Hz)
(mm)
(+105°C) (A)
(+20°C)
22 25 1.8 0.55
型号
PET套
码头长度
4.0mm
（无P.V.C.plate）
200
33000 30 45 4.7 0.45 ECEC1CA333DJ
100
35 35 4.7 0.45 ECEC1CA333EJ
100

莫萨DA-682A系列19寸2U机械级机器人电脑商品说明书

DA-682A Seriesx862U19-inch rackmount computers with2nd Gen Intel®Celeron®or Core™i7CPU,6 Gigabit Ethernet ports,and2PCI expansion slotsFeatures and Benefits•EN50121-4compliant for railway wayside applications•2nd Gen Intel core processor(Sandy Bridge)•Built-in DDR3SDRAM and industrial DOM•6Gigabit Ethernet ports for network redundancy•2PCI expansion slots for expansion modules•1CompactFlash socket for storage expansion•4high-speed,system-bootable USB2.0ports•19-inch2U rack-mountable case•100to240VAC power input•Ready-to-run Linux or Windows Embedded Standard7platformCertificationsIntroductionThe DA-682A Series computers are x86platforms with VGA,6Gigabit Ethernet ports,CompactFlash,USB,and two PCI ports for DA Series expansion modules.The DA-682A comes in a standard19-inch2U rack-mountable case.With their robust design,DA-682A computers are specialized for industrial automation applications:power substations,transportation and shipping,and oil and gas production and supply.The DA-682A runs either Linux or Windows Embedded Standard7,providing a friendly environment for developing sophisticated application software.Moxa’s ready-to-run software and readily available after-service support make the programmer’s job easier by helping them developbug-free code quickly and at a lower cost.In addition,the DA-682A comes with three different CPU options and basic models that allow system designers to install the DOM,RAM,and operating system according to their specific requirements.These options provide greater versatility for building custom industrial solutions.EN50121-4compliance confirms that the DA-682A can deliver stable and reliable system operations for rail applications.For station ISCS (Integrated Supervisory Control System)and wayside control and monitoring systems,a powerful front-end processor is needed for controlling the local SCADA and traction power relay house.The expandable serial interfaces and6Gigabit Ethernet ports enable the integration of station subsystems,including AFC,PAS,PSD,and FAS,on a single platform.For wayside applications,you can also integrate disaster prevention,traction power,and signaling and safety systems to provide an integrated view of your smart rail setup.The DA-682A comes with2PCI ports that accept DA Series expansion modules.Moxa provides a variety of communication modules for the DA Series,including an8-port RS-232/422/485module,a4-port10/100Mbps LAN module,and a universal PCI expansion module.This friendly design gives users the advantage of being able to swap out modules quickly and easily,making the DA-682A an ideal solution for a wide array of industrial automation applications.AppearanceFront ViewRear ViewSpecificationsComputerCPU DA-682A-C0Series:Intel®Celeron®Processor827E(1.5M Cache,1.40GHz)DA-682A-C1Series:Intel®Celeron®Processor847E(2M Cache,1.10GHz)DA-682A-C7Series:Intel®Core™i7-2610UE Processor(4M Cache,up to2.40GHz) System Chipset Mobile Intel®HM65Express ChipsetGraphics Controller Intel®HD GraphicsSystem Memory Pre-installed DA-682A LX Series:1GB DDR3DA-682A W7E Series:2GB DDR3System Memory Slot SODIMM DDR3/DDR3L slot x1Supported OS Linux Debian7Windows Embedded Standard7(WS7P)32-bitWindows Embedded Standard7(WS7E)32-bitStorage Slot 2.5-inch HDD/SSD slots x2DOMs x1Storage Pre-installed DA-682A LX Series:2GB DOMsDA-682A W7E Series:8GB DOMsComputer InterfaceEthernet Ports Auto-sensing10/100/1000Mbps ports(RJ45connector)x6USB2.0USB2.0hosts x4,type-A connectorsExpansion Slots PCI slots x2Video Input VGA x1,15-pin D-sub connector(female)LED IndicatorsSystem Power x1Storage x1Programmable x8LAN2per port(10/100/1000Mbps)Power ParametersInput Voltage100to240VACPower Button ON/OFF(rear panel)Reset button(front panel)Power Consumption30W(max.)Physical CharacteristicsHousing MetalDimensions(without ears)440x315x90mm(17.32x12.40x3.54in) Weight7,000g(15.56lb)Installation19-inch rack mountingEnvironmental LimitsOperating Temperature-10to60°C(14to140°F)Storage Temperature(package included)-20to80°C(-4to176°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN61000-6-2/-6-4EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-11DIPsIEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:10V/mIEC61000-4-4EFT:Power:4kV;Signal:4kVIEC61000-4-5Surge:Power:4kV;Signal:4kVIEC61000-4-6CS:10VIEC61000-4-8:20A/mSafety EN60950-1,UL60950-1Shock IEC60068-2-27DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime527,124hrsWarrantyWarranty Period3yearsDetails See /warrantyPackage ContentsDevice1x DA-682A Series computerInstallation Kit1x rack-mounting earDocumentation1x quick installation guide1x warranty cardNote This product requires additional modules(sold separately)to function. DimensionsOrdering InformationModel Name CPU DDR3RAM OS Storage(DOM)Linux Debian732-bitWindowsEmbeddedStandard732-bitPower Input100-240VACOperating Temp.DA-682A-C0827E––––✓-10to60°C DA-682A-C0-LX827E1GB2GB✓–✓-10to60°C DA-682A-C0-W7E827E2GB8GB–✓✓-10to60°C DA-682A-C1847E––––✓-10to60°C DA-682A-C1-LX847E1GB2GB✓–✓-10to60°C DA-682A-C1-W7E847E2GB8GB–✓✓-10to60°C DA-682A-C7i7-2610UE––––✓-10to60°C DA-682A-C7-LX i7-2610UE1GB2GB✓–✓-10to60°C DA-682A-C7-W7E i7-2610UE2GB8GB–✓✓-10to60°C Accessories(sold separately)Expansion ModulesDA-SP08-I-EMC4-DB8-port RS-232/422/485serial module with DB9connector and isolation;suitable for EMC Level4environmentsDA-SP08-I-EMC4-TB8-port RS-232/422/485serial module with terminal block connector and isolation;suitable for EMCLevel4environmentsDA-SP08-I-DB8-port RS-232/422/485serial module with a digitally isolated DB9connectorDA-SP08-DB8-port RS-232/422/485serial module with DB9connectorDA-SP08-I-TB8-port RS-422/485serial module with digitally isolated terminal blockDA-SP38-I-TB8-port RS-422/485serial module with digitally isolated terminal blockDA-SW08-RJ8-port10/100Mbps unmanaged switch moduleDA-LN04-RJ4-port10/100Mbps LAN moduleDA-UPCI-DK Universal PCI development kitDA-FX04-MM-ST-T4-port(100BaseFX)fiber LAN module with multi-mode,ST connector,supports IP Teaming Storage KitsDA-682A HDD Kit DA-682A HDD kitUSB Dongle KitsUSB Dongle Kit Internal USB dongle kit installation package©Moxa Inc.All rights reserved.Updated Nov12,2018.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。

JM-2车检器

≤6Ω
5 250μH -300μH
≤9Ω
6 300μ H
以上 ≤12Ω
注：以上铺设线圈的规定必须严格遵守，方能保证线圈检测器正常工作。
14、封口材料
对线槽的封口一般用热熔沥青、密封胶或环氧树脂，线槽封口的主要标准是保证线圈线缆完全密封，
内部无气泡。
为了保证寿命长，推荐所有线圈线缆完全密封在树脂中，但当线槽或线缆较湿时不可用此方法。
图二 3、为了获得电平信号输出（I/O），需要将外部单独直流供电电源（如+5V）接于光藕直流电源的正与地。光耦直流电源的地与所要连接设备的地连接， OUT-1, OUT-2, OUT-3, OUT-4 与设备的I/O口连接，即可获得所需的电平输出。如果光藕直流供电电源为+5V，则输出的电平为标准TTL电。
红灯信号ac220v管脚号功能线圈1和线圈2为一组且按行车方向线圈1在前线圈2在后线圈3和线圈4为一组且按行车方向线圈3在前线圈4在后图二3为了获得电平信号输出io需要将外部单独直流供电电源如5v接于光藕直流电源的正与地
重庆极目电子科技有限公司
JMⅡ型车辆检测器用户手册
重庆极目电子科技有限公司
CHONGQING JIMU ELECTONICS TECHNOLOGY CO.LTD.
4、闯红灯型/测速型拨码开关的设定 PM2 为拨码开关的设置位。拔向 ON 位置为 0 : 表示测速型。
6
重庆极目电子科技有限公司
拔向另一边为 1 : 表示闯红灯型。其它拨码开关保留未用. 五、故障处理： 1、上电后 JM-II 车辆检测器的五个 LED 灯常亮，说明有故障。 2、馈线冗余不宜过长，要将过长的馈线剪掉。此线圈检测器为检测线圈中电感量的变化检测设备，3、外界的干扰很容易致此检测单元工作不稳定，线圈埋设的不好，如没有双绞，该屏蔽的地方没有屏蔽，非常容易导致检测器工作不稳定，务必按照线圈埋设规范进行铺设。六，数据存取定义 RS-485自定义通讯协议，串行口设定及通讯格式如下：

奥利满科学解决方案美国有限公司产品目录说明书

Shaft Size 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm) 0.125 in. (3.17 mm)
Eddy Current Probes
Table of Contents
- Flexible Shaft Surface Probes - Bent Shaft Surface Probes - Angle Shaft Surface Probes - Right Angle Surface Probes - Straight Shaft Surface Probes - Pencil Surface Probes - Other Surface Probes - Rotating Plastic Scanner Probes - Rotating Stainless Steel Scanner Probes - Other Scanner Probes - Manual Bolt Hole Probes - Ring / Donut Probes - Spot Probes - Sliding Probes - Conductivity Probes - Weld Probes - Cable & Adaptors - Standards

ECA1HM221中文资料(panasonic)中文数据手册「EasyDatasheet - 矽搜」

10000 16
31.5 1600 0.42 0.8 7.5
ECA1AM103
15000 18
35.5 1850 0.52 0.8 7.5
ECA1AM153
10 5
11
30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( )
22 5
11
75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( )
引线空间
直行
编带编带
½B ½i
型号
最小包装台数
直行
大坪
Leads
(V) (µF) （毫米）（毫米）（毫安均方根）（毫米）（毫米）（毫米）（毫米）
(pcs) (pcs)
220 5
11
240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( )
200 2000
470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( )
– EEE-112 –
00 Nov. 2012
芯片中文手册,看全文,戳
铝电解电容器/ M
■ 标准产品
耐力：85°C 2000ħ
机箱尺寸
规范
引线长度
W.V.
Cap. (±20 %)
Dia.
长度
纹波晒黑 δ 铅
当前
Dia.
（120赫兹）（120赫兹）
(+85 °C) (+20 °C)
ECA1VM471( )
200 500
1000 12.5 20
900 0.14 0.6 5.0 5.0
35
2200 16
25 1250 0.16 0.8 7.5 7.5

gc-6820气相色谱仪[精华]

GC6820气相色谱仪00000000色谱性能0000000. 保留时间重现性<0.008% 或<0.0008 min0000000. 峰面积重现性<1%RSD0000000GC6820 气相色谱仪是代表最新技术发展水平的色谱仪，可为各种应用提供卓越的性能。

之所以如此，主要是因为使用先进的电子气路控制(EPC) 和高精度的温度控制。

每个EPC 单元都使用专用的进样口和检测器选项进行了优化。

000000GC6820 柱温箱的温度控制可以满足快速准确地梯度控温。

总体的热性能提供了最佳的色谱性能，包括峰的对称性、保留时间的重现性和保留指数的准确性。

精确的气路压力控制和准确的温度控制相结合，可以得到出色的保留时间重现性，这是所有色谱检测的基础。

0000 0000具有全套常规气体进样和柱切换阀。

为满足高级色谱应用（二维中心切割，检测器分流等）配置了高性能、惰性的气流切换多路连接器。

000000GC6820系统具有可靠、耐用和寿命长的特点，吉理承诺保证仪器使用十年，使仪器在使用期间低成本运行。

000000系统性能0000000. 双通道设计可使用双进样口和双检测器。

0000000. 全量程的数字化数据输出，可在一次进样中定量测定最大峰和最小峰。

0000000. 所有的进样口和检测器全面使用EPC，对特殊的进样口和检测器部件的控制范围和分离性能进行了优化。

000000. 用于毛细管柱的EPC 具有控制四种色谱柱流量控制的模块，恒压模式和梯度压力（三阶梯度）模式，恒流模式或梯度流速（三阶梯度）模式。

可计算色谱柱的平均线流速。

0000000. 标准化的大气压和温度补偿，即使实验室环境有变化时，检测结果也不会有改变。

0000000. 自动液体进样器完全整合到主机的控制中。

0000000. 可以用本机键盘或通过网络数据系统，设定参数和自动控制。

可通过前面板对时钟时间编程进行初始化，在未来的日期或时间启动某一事件（开启/关闭，启动方法等）。

ScanEM 产品系列参数及配件说明书

ScanEM ®Probes—near-field probes for easy detection and measurement of electromagnetic emissionSpecificationsScanEM-C/QC AccessoriesModel CTA101Includes:Cable SMB/BNC 6’ (1.8m)BNC to Male N AdapterBNC to Banana Plug AdapterScanEM Model CTK010ScanEM-C Model CTK015ScanEM-Q Model CTK017ScanEM-QC Model CTK019ParameterEvery ScanEM kit includes:- One E field probe - One H filed probe - Plastic storage case - Batteries - User’s Guide - 6’ (1.8m) cable (models CTK015and CTK019 only)What is ScanEM ®?Shorten your development schedule and eliminate the need forproduct redesign by using proper EMC tools from the beginning of the project. ScanEM probes are diagnostic instruments for detect-ing, locating and measuring electromagnetic emission. They are professional tools that don’t require you to be an EMC expert to competently address emission compliance. Small and large compa-nies all over the world use ScanEM probes to efficiently solve EMC,signal integrity and interference problems.ScanEM probes can reliably predict electromagnetic behavior of your product, and can locate emission sources in a matter of sec-onds. They detect the presence of an electromagnetic field and pro-vide audio and visual indication of its relative strength.ScanEM probes work by themselves, or as broadband active probles with any spectrum analyzer, oscilloscope or multimeter.ScanEM FeaturesPinpoint Exact Sources of EMI Due to their high spatial reso-lution, ScanEM probes can identify the exact source of electromagnetic emission down to a single component.Detect Electric and Magnetic Fields SeparatelyKnowing the type of EM radia-tion is critical for solving emission problems. ScanEM probes can detect electric (E)and magnetic (H) fields.Small SizeScanEM probes fit in the palm of a hand and are easy to operate.Their small size allows scanning for EMI in very tight areas.Self-ContainedScanEM needs nothing else to operate as a self-containedprobe: no cords, no power sup-ply, no amplifier.Audio OutputTone pitch changes with field strength. Detect the slightest difference in the field strength without taking your eyes off the DUT.CredenceTechnologies, Inc.www ContentE Field Probe ScanEM-E ScanEM-EC ScanEM-EQ ScanEM-EQC H Field ProbeScanEM-H ScanEM-HC ScanEM-HQ ScanEM-HQC FieldsE Field Probe Electric Electric Electric Radiated Electric Radiated H Field Probe Magnetic Magnetic Magnetic Conducted Magnetic Conducted Frequency Response E Field Probe 2MHz–2GHz 2MHz–2GHz 2MHz–1GHz 2MHz–1GHz H Field Probe100kHz–100MHz1MHz–1GHz 150kHz–30MHz150kHz–30MHz RF OutputYes Yes DC Output to a Multimeter Yes Yes Sensitivity (typical) E Field Probe -10dBm/(V/m)-10dBm/(V/m)H Field Probe-20dBm/mA -12dBm/mA Dimension (approx.) 5.75"x1.21"x0.76" 6.18"x1.21"x0.76" 6.88"x1.21"x0.76"7.31"x1.21"x0.76"146mmx31mmx20mm 157mmx31mmx20mm 175mmx31mmx20mm 186mmx31mmx20mm Weight (approx.) each probe 2.25oz (65g) 2.25oz (65g) 2.3oz (70g) 2.3oz (70g)Battery (each probe)2xAAA 2xAAA 2xAAA 2xAAA (included)(included)(included)(included)Indication:LED Bar Graph 5-LED color level barAudio IndicationSpeaker (tone pitch proportional to the field strength)PC Board Level EMC Diagnostics YesYesProduct Level EMC Diagnostics YesYesSignal Integrity Yes Repair & Service YesYesProduction & QA Yes Yes EMI Location YesYes ESD Event AnalysisYesScanEM probes come with a one year limited warranty. Made in the U.S.A. All specifications are subject to change without notice.ApplicationsLED Color Bar5-LED Green/Yellow/Red light bar instantly shows relative field strength.Will Not Disturb Circuit Operation ScanEM probes do not touch the circuit and will not disturb normal operation of a tested product.Level/Squelch DialAdjust ScanEM to detect EMI in a wide dynamic range with the level dial. The squelch fea-ture keeps ScanEM quiet until it locates “hot” areas above a preset level.RF Output to Spectrum Analyzer and OscilloscopeWith their high gain andbroad, flat frequency response,ScanEM-C/QC probes provide RF signal into any spectrum analyzer or oscilloscope.DC Output to a Multimeter Monitor field strength with your multimeter: ScanEM-C/QC pro-vides DC voltage as a function of field strength.ScanEM ®—a little probe that is many things in oneEMC Diagnostics EMC in Production Service and Signal Integrity Connectivity…to a spectrum analyzerEquip your spectrum analyzer with ScanEM probes and open its eyes to signals it has never seen be-fore. Each ScanEM probe covers the entire EMC bandwidth, and has a broadband amplifier built in.Due to its high spatial resolution, ScanEM-C can pin-point a source of emission down to a trace or component.Traditional passive probes have little or no output at the lower end of the spectrum,where most fundamental frequencies are. Compare the frequency response of ScanEM probes versus their passive counterparts on the screen shot shown. ScanEM probes have a flat frequency response across the entire bandwidth.…to an oscilloscope Connected to an oscillo-scope, ScanEM-C lets you see signals without affect-ing the circuit in any way.The screenshot shows how a conventional 1GHz FET probe (bottom trace)missed signal artifacts that ScanEM-EC was able to show (top trace).ScanEM-EC, an electricfield probe, showsthe voltage on traces.ScanEM-HC, a magneticfield probe, shows AC currents up to 1GHz on…to a multimeterno additional equipment.。

RECOM 电源 RACAC DC 转换器 PA-1 产品说明书

RAC AC/DC Conver er4 Watt Single OutputRAC04-K/277IEC60950-1 certified IEC62368-1certified UL62368-1 certifiedCSA/CAN C22.2 No. 62368-1-14 certified EN62368-1 compliant EN60335-1 compliant EN61010-1 compliant IEC/EN61558-1 compliant IEC/EN61558-2-16 compliant EN55032 compliant EN55024 compliantEN55014-1 /-2 compliant IEC/EN61204-3 compliant FCC 47 Part 15CB ReportSelection GuidePart Input Output Output Efficiency Max. CapacitiveNumber Voltage Range Voltage Current (1) typ. (2)Load [(VAC] [VDC] [mA] [%] [µF)RAC04-05SK/277 80-305 5 800 76 7200RAC04-12SK/277 80-305 12 333 78 1000RAC04-15SK/277 80-305 15 267 80 820RAC04-24SK/277 80-305 24 167 80 220On RequestRAC04-3.3SK/277 80-305 3.3 1200 73 10000Notes:Note1: Refer to “Line Derating“ graphNote2: Measured @ 230VAC/50Hz at +25°C with constant resistant mode at full loadDescriptionThe RAC04-K/277 series delivers an uncompromising 4 watts of continuous output power (6W peak) in harsh industrial and household environments. These modules deliver full load output power from -40°C to 75°C across the entire input range of 80VAC to 305VAC and are certified for operation with power derating up to 90°C air ambient. A peak load capability of up to 150% supports dynamic power demands of applications. This series of fully encapsulated AC/DC modules is a complete solution without the need for external components which supports Ecodesign Lot 6 standby mode operation for worldwide applications in automation, industry 4.0, IoT, household, and home automation. With international safety and EMC certifications for industrial, domestic, ITE, and household applications, these are some of the most versatile power modules on the market. Due to their reinforced class II installation rating for floating outputs and their significantly wide margin to class B emissions compliance without external components and a certified 4kV AC (5.25 kV DC) isolation, these are the easiest to use modular power solutions in the industry.nom. Output Power nom. Output VoltageRAC04-__ SK/277Model NumberingS ingleE224736Ordering Examples RAC04-05SK/277 = 5Vout Single RAC04-12SK/277 =12VoutSingleSpecifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)REGULATIONSParameterCondition ValueOutput Accuracy ±1.0% typ.Line Regulation ±0.5% typ.Load Regulation 1.0% typ.Transient Response25% load step changerecovery time4.0% max.500µs10.5-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]10.50-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]RAC04-05SK/277RAC04-12SK/277Deviation vs. Load(80-305VAC)Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)10.5-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]10.50-0.5-1D e v i a t i o n [%]0102030405060708090100Output Load [%]RAC04-15SK/277RAC04-24SK/277Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)SAFETY AND CERTIFICATIONSCertificate Type Report / File Number StandardAudio/video, information and communication technology equipment - Safety requirements E224736UL62368-1:2014, 2nd Edition CAN/CSA C22.2 No. 62368-1-14, 2nd EditionInformation Technology Equipment, General Requirements for Safety (CB)E491408-A6-CB-1IEC60950-1:2005 + A2:2013, 2nd EditionInformation Technology Equipment, General Requirements for Safety EN60950-1:2006 + A2:2013 Audio/video, information and communication technology equipment - Safety requirements (CB)E491408-A6011-CB-1IEC62368-1:2014, 2nd Edition Audio/video, information and communication technology equipment - Safety requirements (LVD)EN62368-1:2014 + A11:2017 Household and similar electrical appliances - Safety - Part 1: General requirements (LVD)EN60335-1:2012 + A1:2018Safety of power transformers, power supplies, reactors and similar products for supply voltages up to 1100 V IEC61558-1:2005 2nd Edition + A1:2009EN61558-1:2005 + A1:2009Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)Certificate Type Report / File Number StandardSafety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (LVD)IEC61558-2-16:2009 + A1:2013, 1st EditionEN61558-2-16:2009 + A1:2013Safety requirements for electrical equipment for measurement, control and laboratory use -Part 1: General requirements (LVD)EN61010-1:2010 RoHS2RoHs-2011/65/EU + AM-2015/863 EMC Compliance (Household)Report / File Number Standard / Criterion Electromagnetic compatibility - Requirements for household appliances, electric tools and similarapparatus - Part 1: Emission (8)EN55014-1:2006 + A2:2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similarapparatus - Part 2: ImmunityEN55014-2:2015 ESD Electrostatic discharge immunity test Air ±8kV; Contact ±4kV IEC61000-4-2:2008, Criteria B Fast Transient and Burst Immunity AC Power Port: ±1.0kV IEC61000-4-4:2012, Criteria B Surge Immunity AC Power Port: L-N ±1.0kV IEC61000-4-5:2014, Criteria B Immunity to conducted disturbances, induced by radio-frequency fields AC Power Port: 3V EN61000-4-6:2013, Criteria AVoltage Dips and Interruptions Voltage Dips: 100%60%EN61000-4-11:2004, Criteria CEN61000-4-11:2004, Criteria CEMC Compliance (Multimedia)Condition Standard / Criterion Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility IEC/EN61204-3:2000, Class B Electromagnetic compatibility of multimedia equipment - Emission requirements (9)EN55032:2015, Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement EN55024:2010 + A1:2015 ESD Electrostatic discharge immunity test Air ±2,4,8kV; Contact ±4kV IEC61000-4-2:2008, Criteria BRadiated, radio-frequency, electromagnetic field immunity test10V/m (80 - 1000MHz)IEC61000-4-3, Criteria A 3V/m (1800MHz, 2600Mhz,3500MHz, 5000MHz)IEC61000-4-3:2006 + A2:2010, Criteria AFast Transient and Burst Immunity AC Power Port: ±2.0kV IEC61000-4-4, Criteria B AC Power Port: ±1.0kV IEC61000-4-4:2012, Criteria ASurge Immunity AC Power Port: L-N ±1.0kV IEC61000-4-5:2014, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields AC Power Port: 10V IEC61000-4-6, Criteria AVoltage Dips and Interruptions Voltage Dips:100% / 30%70%40%IEC61000-4-11:2004, Criteria AIEC61000-4-11:2004, Criteria BIEC61000-4-11:2004, Criteria C Interruptions: >95%IEC61000-4-11:2004, Criteria ALimits of Voltage Fluctuations & Flicker EN61000-3-3:2013 Limitations on the amount of electromagnetic interference allowed from digital and electronicdevicesFCC 47 Part 15 Subpart B:2017, Class B Notes:Note9: If output is connected to GND, please contact RECOM tech support for further informationDIMENSION and PHYSICAL CHARACTERISTICSParameter Type ValueMaterial case/baseplatepottingPCBplastic, (UL94 V-0)silicone, (UL94 V-0)FR4, (UL94 V-0)Dimension (LxWxH)36.7 x 27.2 x 17.4mm Weight30g typ.Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated)PACKAGING INFORMATIONParameter Type Value Packaging Dimension (LxWxH)tube506.4 x 29.8 x 25.5mm Packaging Quantity12pcs Storage Temperature Range-40°C to +85°C Storage Humidity non-condensing20% to 90% RH max.The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause。

ECA ECB系列产品的扩展4路继电器卡说明说明书

NOTICE D'UTILISATION DE LA CARTE 4 RELAIS DES GAMMES ECA ET ECBpagesIntroduction2Installation 2 à 3raccordement pour un ECA/ECB 200Installation 4 à 8raccordement pour un ECA 300/3000 ou ECB 3000Carte 4 relais des gammes ECA et ECB réf : 31126ZNO1022000 E - 02/2015En raison de l'évolution des normes et du matériel, toutes les caractéristiques et présentations figurant sur cette notice sont COOPER séCuRIté sAs (Groupe EAtON)Parc européen d’entreprises IIRue Beethoven - BP 10184 63204 RIOM Cedex FRANCE Assistance Technique TéléphoniqueZNO1022000 E - 02/20151.1 GénéralitésLa carte d’extention 4 relais (31126) permet d’utiliser des contacts supplémentaires sur les produits des gammes ECA et ECB. Pour utiliser cette carte 4 relais, il faut d’une part connecter la carte à l’ECA/ECB et d’autre part programmer l’ECA/ECB.2 .1 Installation dans un ECA 200 ou un ECB 200On ne peut utiliser qu’une seule carte 4 relais.Contacts option : La carte est installée à l’intérieur de l’ECA/ECB à l’aide des 4 vis livrées dans le sachet d’accessoires, comme l’indique la photo suivante.À l’aide de la limande 8 points livrée en accessoire, relier le connecteur JP6 de la carte ECA/ECB avec le connecteur JP1 de la carte 4 relais.JP6JP1ZNO1022000 E - 02/2015 2.1.1 Programation de la carte 4 relais sur ECA/ECB : switchs 6-9-10 sur ONDans ce mode de fonctionnement, seule la touche 3 est active. À l’aide de la touche 3, on positionne la led jaune de zone sur les zones 1, 2 ,3 ou 4.2.1.2 Mode 1 : switchs 6-9-10 sur ON, led jaune de la zone N°1 sélectionnéeRelai 1 : commandé par au moins 1 zone en alarmeRelai 2 : commandé par au moins 1 zone hors serviceRelai 3 : commandé par au moins 1 zone en essaiRelai 4 : commandé par au moins 1 défaut avec un retard à l’enclenchement de 1 minute2.1.3 Mode 2 : switchs 6-9-10 sur ON, led jaune de la zone N°2 sélectionnéeTous les relais sont hors service.2.1.4 Mode 3 : switchs 6-7-10 sur ON, led jaune de la zone N°3 sélectionnéeDans ce mode, seules les touches 1 et 3 sont actives.Dans ce mode, il faut après avoir sélectionné la led 3, reconfigurer les switchs pour chacun des relais.2.1.5 Mode 3 : commande des zones associées au relai 1 : switchs 6-7-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 1.2.1.6 Mode 3 : commande des zones associées au relai 2 : switchs 6-7-9-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 2.2.1.7 Mode 3 : commande des zones associées au relai 3 : switchs 6-7-8-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 3.2.1.8 Mode 3 : commande des zones associées au relai 4 : switchs 6-7-8-9-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 4.2.1.9 Mode 4Ce mode est inutilisé pour cette configuration matérielle.ZNO1022000 E - 02/20153.1 Installations dans un ECA “300” / “3000” ou ECB “3000” (contact options)JP6JP1JP1JP3Voir paragraphe 3.1Voir paragraphe 3.2JP1JP6ZNO1022000 E - 02/2015Dans ce mode de fonctionnement, seule la touche 3 est active. À l’aide de la touche 3, on positionne la led jaune de zone sur les zones 1, 2 ,3 ou 4. Relai 1 : commandé par au moins 1 zone en alarmeRelai 2 : commandé par au moins 1 zone hors serviceRelai 3 : commandé par au moins 1 zone en essaiRelai 4 : commandé par au moins 1 défaut avec un retard à l’enclenchement de 1 minuteTous les relais sont hors service.Dans ce mode, seules les touches 1 et 3 sont actives.Dans ce mode, il faut après avoir sélectionné la led 3, reconfigurer les switchs pour chacun des relais.Avec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 1.Avec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 2..Avec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 3.Avec la touche 1 on sélectionne la zone de détection à associer (led rouge clignotante).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de la zone au relai 4.Ce mode est inutilisé pour cette configuration matérielle.3.1.9 Mode 43.1.8 Mode 3 : commande des zones associées au relais 4 : switchs 6-7-8-9-10 ON3.1.7 Mode 3 : commande des zones associées au relai 3 : switchs 6-7-8-10 sur ON3.1.6 Mode 3 : commande des zones associées au relai 2 : switchs 6-7-9-10 ON3.1.4 Mode 3 : switchs 6-7-10 sur ON, led jaune de zone N°3 sélectionnée3.1.3 Mode 2 : switchs 6-9-10 sur ON, led jaune de zone N°2 sélectionnée3.1.2 Mode 1 : switchs 6-9-10 sur ON, led jaune de zone N°1 sélectionnée3.1.1 Programation de la carte 4 relais pour ECA 300/3000 / ECB 3000 : switchs 6-9-10 sur ON 3.1.5 Mode 3 : commande des zones associées au relai 1 : switchs 6-7-10 ONZNO1022000 E - 02/2015JP3JP1ZNO1022000 E - 02/2015 3.3JP6JP2JP3JP1ZNO1022000 E - 02/2015dEuX étAPEs dE PROGRAMMAtION sONt NéCEssAIREs :3.3.1 Configuration du CMsI en départ sur zone : switchs 6-9-10 sur ONDans ce mode de fonctionnement, seule la touche 3 est active. À l’aide de la touche 3, on positionne la led jaune de zone sur la zone 4. Dans ce cas, le CMSI MT est configuré en départ sur zones sélectives.3.3.2 Zones associées au relai n°1 : switchs 6-7-10 sur ONAvec la touche 1 on selectionne la zone de détection à associer (led rouge fixe).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de ou des zones au relai 1.3.3.3 Zones associées au relai n°2 : switchs 6-7-9-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge fixe).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de ou des zones au relai 2.3.3.4 Zones associées au relai n°3 : switchs 6-7-8-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge fixe).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte) , l’association de ou des zones au relai 3.3.3.5 Zones associées au relai n°4 : switchs 6-7-8-9-10 sur ONAvec la touche 1 on sélectionne la zone de détection à associer (led rouge fixe).Avec la touche 3 on sélectionne (led jaune fixe) ou désélectionne (led jaune éteinte), l’association de ou des zones au relai 4.Pour la protection de l’environement, papier 100 % recyclé。

JM20330中文资料

JMicron/JM20330JM20330Serial ATA Bridge ChipDescriptionJMicron’s JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY , Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0. JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. The application layer supports both the A TA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.Quick ReferenceSignal Bit Rate 3.0/1.5 Gbps Spread Spectrum -3.0% to 0.0 Power Supply 3.3V and 1.8V ESD Protection 2000 V Host and Device Programmable Adj. Amplitude 2 levels Adj. Pre-emphasis 4 levels Package 64-pin TQFP ApplicationsAll SATA products Mass storage devices Optical storage Dongle bridge Storage systemFeaturesSerial ATA 1.0 Specification compliant Automatic Serial ATA 3.0/1.5 Gbps speed negotiationATA/ATAPI PIO mode 0 to 4ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s. ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count Support Serial ATA hot-plug Ultra low power consumptionWork for both AC and DC couple between the transmitter and the receiverProvide specified OOB signal detection and transmissionSupport Spread Spectrum Clocking to reduce EMISupport 20MHz, 25MHz, 30MHz or 40MHz Reference ClockSupport Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level Master/Slave supportVersion 1.0May 2003 © JMicron 2003. All rights reserved.Page 1Copying prohibited.“Œ‹ž“s •¢“c ’J ‹æŽO Œ¬’ƒ‰® 2-11-22 ƒT ƒ“ƒ^ƒ••[ƒY ƒZ ƒ“ƒ^•[ƒrƒ‹•@•§154-8539•@/•@TEL: 03 (3487) 8502 / FAX: 03 (3487) 8825 / e-mail: jmicron@ ‘å•ãŽs—…•ì‹æ•¼’†“‡ 3-7-13 •V‘å•ãƒT ƒN ƒZ ƒX ƒrƒ‹EAST•@•§532-0011•@/•@TEL: 06(6885) 1688 / FAX: 06 (6885) 1721 /–{ŽÐŠÖ•¼‰c ‹Æ•ŠJMicron/JM20330Functional Block DiagramRXP/RXN GIO0GIO1TXP/TXNMODE[2:0]Device BridgeHost BridgePC IDE PortHDD/Optical StorageVersion 1.0May 2003 © JMicron 2003. All rights reserved. Page 2Copying prohibited.Fig. 1 Functional Block Diagram of JM20330ApplicationsFig. 2 JM20330 Host and Device bridge system diagramProduct InformationName DescriptionJM20330 Serial ATA Bridge ChipDesign KitContact Information 1 JM20330 Data Sheet Department Email 2 JM20330 Design GuideSales sales@ Application EVBTech. Support 3fae@“Œ‹ž“s •¢“c’J ‹æŽO Œ¬’ƒ‰® 2-11-22 ƒT ƒ“ƒ^ƒ••[ƒY ƒZ ƒ“ƒ^•[ƒrƒ‹•@•§154-8539•@/•@TEL: 03 (3487) 8502 / FAX: 03 (3487) 8825 / e-mail: jmicron@ ‘å•ãŽs—…•ì‹æ•¼’†“‡ 3-7-13 •V‘å•ãƒT ƒN ƒZ ƒX ƒrƒ‹EAST•@•§532-0011•@/•@TEL: 06(6885) 1688 / FAX: 06 (6885) 1721 /–{ŽÐŠÖ•¼‰c ‹Æ•Š。

Eaton Moeller EASY I O 扩展设备产品说明书

Eaton 197224Eaton Moeller® series EASY I/O expansion, For use with easyE4, 24 V DC, Inputs expansion (number) analog: 4, screw terminal EASY-E4-DC-4PE1Spécifications généralesEaton Moeller® series EASY I/O expansion197224401508089285458 mm 90 mm 36 mm 0.1 kg IEC/EN 61000-6-3 IEC 60068-2-30 CULus per UL 61010 IEC/EN 61131-2 IEC 60068-2-6 IEC 60068-2-27 IEC/EN 61000-6-2 EN 61010 EN 50178CSA-C22.2 No. 61010 IEC 60664 IEC/EN 61000-4-2 UL ListedUL Category Control No.: NRAQ, NRAQ7UL File No.: E205091 DNV GL CEEASY-E4-DC-4PE1Product NameCatalog Number EANProduct Length/Depth Product Height Product Width Product Weight Certifications Model CodeAdditional measurement aids: Filtering (software), smoothing of analog input signal (PT1 behavior), only with set sampling time, selectable per sensor: yesExpandableExpansion deviceMeasuring principle: Two or three wire per sensor, selectable by connection of sensorCard diagnosticDiagnostics below lower measurement range IP20According to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201Rail mounting possibleTop-hat rail fixing (according to IEC/EN 60715, 35 mm)Wall mounting/direct mountingScrew fixing using fixing brackets ZB4-101-GF1 (accessories) Front build in possibleIII2Control relays easyE4TCP/IPMODBUS≤ 5 %12 Bit (0- 4095, digital, scaling per sensor)EASYSOFT-SWLIC/easySoft7easyE4 extensionDC50 mm Drop height, Drop to IEC/EN 60068-2-31 0.3 m 795 - 1080 hPa (operation) -25 °CFeatures Functions Degree of protection Insulation resistance Mounting methodOvervoltage category Pollution degree Product category ProtocolResidual ripple ResolutionSoftwareTypeVoltage typeDrop and toppleHeight of fall (IEC/EN 60068-2-32) - max Air pressureAmbient operating temperature - minHorizontalVertical15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 18 Impacts57 - 150 Hz, 2 g constant acceleration10 - 57 Hz, 0.15 mm constant amplitudeAccording to IEC/EN 60068-2-655 °C-40 °C70 °CCondensation: prevent with appropriate measuresClearance in air and creepage distances according to EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-2015 - 95 % (IEC 60068-2-30, IEC 60068-2-78)8 kV2 kV, Signal cableAccording to IEC/EN 61000-4-42 kV, Supply cable6 kV10 V/m at 0.8 - 1.0 GHz (according to IEC EN 61000-4-3)1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3)3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3)10 V (according to IEC/EN 61000-4-6)Class B (EN 61000-6-3)According to IEC/EN 61000-4-5, power pulses (Surge), EMC 0.5 kV, Supply cables, symmetrical, EASY…DC, power pulses (Surge), EMC1 kV, Supply cables, asymmetrical, power pulses (Surge), EMC20 ms≤ 10 ms, Bridging voltage dips 0.2 - 2.5 mm² (22 - 12 AWG), flexible with ferrule 0.2 - 4 mm² (AWG 22 - 12), solid3.5 x 0.8 mm, Terminal screw0.6 Nm, Screw terminals3.4 W (at 24 V DC)12.5 A (for 6 ms)1 W1 W24 V DC (-15 %/+ 20 % - power supply)20.4 - 28.8 V DC0 VACMounting position Shock resistance Vibration resistance Ambient operating temperature - max Ambient storage temperature - min Ambient storage temperature - max Environmental conditionsRelative humidityAir dischargeBurst impulseContact dischargeElectromagnetic fieldsImmunity to line-conducted interference Radio interference classSurge ratingVoltage dips Terminal capacityScrewdriver sizeTightening torqueHeat dissipationInrush currentPower consumptionPower lossRated operational voltage Supply voltage at AC, 50 Hz - min0 VAC20.4 VDC28.8 VDC≥ 1A (T), Fuse, Power supplyScrew terminal≤ 30 m, unscreened, Analog inputs temperature resistance Pt100 or Ni1000 sensors Input type resistance sensor: Platinum sensor Pt100 (according to DIN EN 60751, IEC 751)Input type resistance sensor: Nickel sensor Ni1000 (according to DIN 43760)40 mA4NoneBetween Analog inputs PT100 or Ni1000 and Power supply: no Between Analog inputs PT100 or Ni1000 and expansion units: yesBetween Analog inputs PT100 or Ni1000 and Inputs: noYes, for supply voltage (Siemens MPI optional)0 W 0 W 0 W 0 ASupply voltage at AC, 50 Hz - maxSupply voltage at DC - minSupply voltage at DC - maxShort-circuit protectionConnection typeCable length InputInput currentNumber of inputs (analog)Number of inputs (digital)Number of outputs (analog)Number of outputs (digital)Explosion safety category for gas Potential isolationProtection against polarity reversal Equipment heat dissipation, current-dependent PvidHeat dissipation capacity PdissHeat dissipation per pole, current-dependent PvidRated operational current for specified heat dissipation (In) Static heat dissipation, non-current-dependent PvsNone1 WMeets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Meets the product standard's requirements.Meets the product standard's requirements.Meets the product standard's requirements.Does not apply, since the entire switchgear needs to be evaluated.Does not apply, since the entire switchgear needs to be evaluated.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Is the panel builder's responsibility.Explosion safety category for dust 10.2.2 Corrosion resistance10.2.3.1 Verification of thermal stability of enclosures 10.2.3.2 Verification of resistance of insulating materials to normal heat10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects10.2.4 Resistance to ultra-violet (UV) radiation 10.2.5 Lifting10.2.6 Mechanical impact10.2.7 Inscriptions10.3 Degree of protection of assemblies 10.4 Clearances and creepage distances 10.5 Protection against electric shock10.6 Incorporation of switching devices and components 10.7 Internal electrical circuits and connections 10.8 Connections for external conductors 10.9.2 Power-frequency electric strength 10.9.3 Impulse withstand voltageEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Tous droits réservés.Eaton is a registered trademark.All other trademarks are property of their respective owners./socialmediaIs the panel builder's responsibility.The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Is the panel builder's responsibility.Is the panel builder's responsibility.The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.DA-CE-ETN.EASY-E4-DC-4PE1DA-MN-h1430de MZ049014EN Video easy E4 control relay IL050021ZU DA-CS-dc_4pe1DA-CD-dc_4pe1TT-197224_EASY-E4-DC-4PE1-de_DE eaton-modular-plc-easy-i-o-expansion-dimensions-002.eps eaton-modular-plc-easy-i-o-expansion-3d-drawing-002.eps10.9.4 Testing of enclosures made of insulating material 10.10 Temperature rise10.11 Short-circuit rating10.12 Electromagnetic compatibility 10.13 Mechanical functioneCAD modelGuide utilisateur Installation videosInstructions d'installationmCAD model Notes de venteSchémas。

EM682FT16FS-45S中文资料(List Unclassifed)中文数据手册「EasyDatasheet - 矽搜」

V
-
0.6
V
Item
输入电容
输入/输出继电器电容
1.电容进行采样,而不是100％测试.
DC及经营特色
符
C IN C IO
测试条件
VIN=0V VIO=0V
Min
Max
Unit
-
8
pF
-
10
pF
参数输入漏电流输出漏电流工作电源
平均工作电流
输出低电压输出高电压
待机电流（TTL）
待机电流（CMOS）
低功耗,256Kx8 SRAM
AC工作条件
测试条件（测试
负载和测试输入/输出参考）
输入脉冲电平：0.4〜2.2V
输入上升和下降时间为5ns
输入和输出参考电压：1.5V
输出负载（见右）：CL
1) = 100pF电容+ 1 TTL（为70ns）
CL1) = 30pF+ 1 TTL（为45nS / 55ns）
Speed
45ns 55ns 70ns
功耗
支持
操作
(I SB1 ,典型值） . (ICC1 .Max)
1 µA
3mA
1 µA
3mA
1 µA
3mA
PKG类型
32-sTSOP 32-sTSOP 32-sTSOP
引脚说明
功能框图
A11 1 A9 2 A8 3 A13 4 WE 5 CS2 6 A15 7 VCC 8 A17 9 A16 10 A14 11 A12 12 A7 13 A6 14 A5 15
1.包括范围和夹具电容
2. R 1= 3070欧姆 , R2= 3150欧姆
3. V TM=2.8V 4,CL = 5pF+ 1 TTL（测量与T

Moxa DA-682C系列产品说明书

P/N: 1802006821011 *1802006821011*DA-682C SeriesQuick Installation Guidex86 Rackmount Embedded ComputersVersion 1.0, February 2020Technical Support Contact Information/supportMoxa Americas:Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5505 Moxa Europe:Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific:Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Moxa India:Tel: +91-80-4172-9088 Fax: +91-80-4132-10452020 Moxa Inc. All rights reserved.OverviewThe DA-682C Series is built around a Intel® Celeron, Intel® Core™ i3, i5 or i7 CPU and comes with dual display ports (2 x HDMI), 5 USB ports, 6 gigabit LAN ports, 2 3-in-1 RS-232/422/485 serial ports, 6 digital Input ports, and 2 digital output ports. The DA-682C is equipped with two hot-swappable 2.5” HDD/SSD slots and supports the Intel® RST RAID 0/1 functionality. Additional value and convenience are provided through a modular design with two independent slots for flexible system integration and expansion. Users have the option to add a variety of different communications modules, including an 8-port RS-232/422/485 module and 4-port 10/100/1000 Mbps LAN module.With IEC 61850-3 and IEEE 1613 compliance, the DA-682C is sure to deliver stable and reliable system operation for power applications. The DA-682C also complies with the IEC 60255 standards, which cover the protection of electrical relays in a smart substation. IEC 60255 is one of the most widely used standards for testing relays and protection equipment, and compliance with the standard ensures that the DA-682C will work reliably and seamlessly with IEDs as part of a robust substation automation system.Package ChecklistEach basic system model is shipped with the following standard items: •DA-682C rackmount computer•Rack-mounting kit•Quick Installation Guide•Warranty cardHardware InstallationFront ViewRear ViewConnecting the PowerThe DA-682C provides single or dual power inputs using a terminal block, which is located on the rear panel. Connect the power cord wires to the screws, and then tighten the screws. The Power LED will light up to indicate that power is being supplied to the DA-682C, after which the BIOS will initialize the flash disk module, causing the Storage LED to blink. It should take about 30 to 60 seconds for the operating system to complete the boot up process. A grounding connector is also provided for power surge protection.In addition, a power button on the rear panel allows users to power on the computer when it is in the sleep or hibernate mode.For detailed power connection and surge protection information, refer to the DA-682C Hardware User’s Manual . Front-panel LEDsThere are 60 LED indicators on the front panel. The LEDs are described in the following table: LED Color DescriptionPowerGreen Power is on OffNo power inputStorage Yellow/Blinking Data is being written to or read from the storage unit OffStorage unit is idlePower 1 Failure OffThe 1st power supply is on RedError in the 1st power supply Power 2 Failure OffThe 2nd power supply is on RedError in the 2nd power supply Gigabit LAN LEDs 1 to 6 Green 100 Mbps Ethernet modeOrange 1000 Mbps (Gigabit) Ethernet modeSerial Port P1/P2 (TX/RX)Green Tx: Serial data is being transmitted YellowRx: Serial data is being received Programmable LEDs 1 to 8 Green/ Blinking Can be used to indicate statuses or for debugging, as defined by users. Module LEDs 1 to 8 (Module A/Module B) Green/ Orange/Blinking Reserved for LAN-port and serial-port expansion cards.Connecting to DisplaysThe DA-682C comes with two HDMI interfaces on the rear panel, allowing users to connect two displaysNOTE For highly reliable video streaming, use premium certified HDMI cables.Connecting to a Keyboard and MouseConnectors for the keyboard and a mouse are located on the rear panel of the computer. Both connectors are PS/2 interfaces; you can directly connect a keyboard and a mouse using these connectors. Serial PortsThe DA-682C comes with two software-selectable RS-232/422/485 serial ports on the rear panel. The ports use terminal blocks. Refer to the following table for the pin assignments: Pin RS-232 RS-422 RS-485(4-wire) RS-485(2-wire)1 TxD TxD(+) TxD(+) –2 RxD TxD(-) TxD(-) –3 RTS RxD(+) RxD(+) Data(+)4 CTS RxD(-) RxD(-) Data(-)5 GND GND GND GNDUSB PortsThe DA-682C comes with two USB 2.0 ports on the front panel and three USB 3.0 ports on the rear panel. The USB ports can be used to connect peripherals, such as flash drives, to expand the systems storage capacity. Ethernet PortsThe DA-682C has 6 100/1000 Mbps RJ45 Ethernet ports on the rear panel. Refer to the following table for the pin assignments: Pin 100 Mbps1000 Mbps 1 Tx+TRD(0)+ 2Tx- TRD(0)- 3 Rx+ TRD(1)+ 4 – TRD(2)+ 5 – TRD(2)- 6 Rx- TRD(1)- 7 – TRD(3)+ 8–TRD(3)-Digital Inputs/Digital OutputsThe DA-682C comes with six digital inputs and two digital outputs in a terminal block. Refer to the following figures for the pin definitions and wiring methods.Relay OutputThe DA-682C provides a relayoutput located on the rear panel of the computer. Refer to the figure on the right for detailed pin definition of the relay output connectors.Installing Storage DisksThe DA-682C comes with two storage sockets, allowing users to install two disks for data storage. Unfasten the screw on the right side of the storage disk tray cover and pull down the cover. Slide out the tray to install the disks. Refer to the DA-682C Hardware User’s Manual for details.There are two slots for installing two SSD disks. The installation sequence of the disks is indicated in the diagram on the right.Installing Expansion ModulesThe DA-682C comes with two expansion module sockets on the rear panel. You can install Moxa’s LAN or serial connectivity expansion module using this socket. For additional details, refer to the DA-682C Hardware User’s。

AEMCA EM7028电缆故障检测仪说明书

• Indica las distancias a los circuitos abiertos y los cortocircuitos e identifica su ubicación
• Visualización de la ubicación de la falla hasta 150 m ó 500 pies (seleccionable)
Par en cortocircuito, conductor en circuito abierto, cortocircuito entre pares, pares separados/cruzados, pares invertidos, continuidad del blindaje
Localización de la falla
• Pantalla grande electroluminiscente azul, de alta visibilidad y con retroiluminación
• Incluye unidad remota y mini cables de interconexiones
• Funciona con esquemas de cableado TIA 568A/B, USOC e ISDN
CARACTERÍSTICAS
• Probador de fallas y mapeador de cable LAN portátil
• Indica todas las fallas comunes de cableado, tales como pares divididos, cortocircuitos, circuitos abiertos, pares invertidos y cables cruzados

ecam220.21说明手册

ecam220.21说明手册
摘要：
1.ECAM220.21 概述
2.ECAM220.21 的功能和特点
3.ECAM220.21 的操作方法
4.ECAM220.21 的应用领域
5.ECAM220.21 的说明手册内容概述
正文：
ECAM220.21 是一款先进的设备，其全称为电子系统控制面板（Electronic System Control Panel）。

它是一种用于监控和控制各种电子设备的设备，具有高度的集成性和可靠性。

ECAM220.21 的功能和特点主要体现在其强大的控制能力和高效的运行效率上。

它可以实时监测并控制设备的运行状态，提供直观的数据反馈，使得操作者可以迅速做出决策。

此外，它还具有远程控制和自动化运行的功能，大大提高了设备的操作便利性和运行效率。

ECAM220.21 的操作方法十分简便，操作者只需要通过触摸屏输入指令，即可完成设备的监控和控制。

此外，它还提供了丰富的自定义功能，可以根据操作者的需求进行个性化设置。

ECAM220.21 的应用领域广泛，主要应用于工业自动化、楼宇自控、智能家居等领域。

它的使用，不仅可以提高设备的运行效率，还可以降低人力成本，是现代化生产和管理的重要工具。

ECAM220.21 的说明手册内容概述主要包括设备的安装和使用方法、设备的维护和保养方法、设备的故障排除方法等。

通过阅读说明书，操作者可以更好地理解和使用设备，保证设备的正常运行。

总的来说，ECAM220.21 是一款性能卓越的电子系统控制面板，它以其强大的功能、高效的运行效率和简便的操作方法，赢得了广大用户的喜爱。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

W.V.Cap.(±20 %)Part N o.Dia.LengthRippleCurrent(120 Hz)(+85 °C)tan δ(120 Hz)(+20 °C)LeadDia.Lead SpaceStraightLeadsTapingStraightTaping✽BTaping✽i(V)(µF)(mm)(mm)(mA r.m.s.)(mm)(mm)(mm)(mm)(pcs)(pcs)6.32205112400.280.5 2.0 5.0 2.5ECA0JM221( )2002000 470 6.311.23800.280.5 2.5 5.0 2.5ECA0JM471( )2002000 1000811.55800.280.6 3.5 5.0ECA0JM102( )2001000 220010168900.300.6 5.0 5.0ECA0JM222( )200500 3300102010200.320.6 5.0 5.0ECA0JM332( )200500 470012.52011700.340.6 5.0 5.0ECA0JM472( )200500 680012.52512700.380.6 5.0 5.0ECA0JM682( )200500 10000162514500.460.87.57.5ECA0JM103( )100250 150001631.517000.560.87.5ECA0JM153100 220001835.519000.700.87.5ECA0JM2235010330 6.311.23300.240.5 2.5 5.0 2.5ECA1AM331( )2002000 10001012.56300.240.6 5.0 5.0ECA1AM102( )200500 220010209200.260.6 5.0 5.0ECA1AM222( )200500 330012.52010900.280.6 5.0 5.0ECA1AM332( )200500 470012.52512000.300.6 5.0 5.0ECA1AM472( )200500 6800162514000.340.87.57.5ECA1AM682( )100250 100001631.516000.420.87.5ECA1AM103100 150001835.518500.520.87.5ECA1AM153501610511300.200.5 2.0 5.0 2.5ECA1CM100( )2002000 22511750.200.5 2.0 5.0 2.5ECA1CM220( )2002000 335111100.200.5 2.0 5.0 2.5ECA1CM330( )2002000 475111300.200.5 2.0 5.0 2.5ECA1CM470( )2002000 1005111800.200.5 2.0 5.0 2.5ECA1CM101( )2002000 220 6.311.22800.200.5 2.5 5.0 2.5ECA1CM221( )2002000 470811.54400.200.6 3.5 5.0ECA1CM471( )2001000 100010166800.200.6 5.0 5.0ECA1CM102( )200500 220012.52010000.220.6 5.0 5.0ECA1CM222( )200500 330012.52512000.240.6 5.0 5.0ECA1CM332( )200500 4700162513600.260.87.57.5ECA1CM472( )100250 68001631.516000.300.87.5ECA1CM682100 100001835.518000.380.87.5ECA1CM1035025100 6.311.21800.160.5 2.5 5.0 2.5ECA1EM101( )2002000 330811.53900.160.6 3.5 5.0ECA1EM331( )2001000 4701012.54800.160.6 5.0 5.0ECA1EM471( )200500 100010208500.160.6 5.0 5.0ECA1EM102( )200500 220012.52512000.180.6 5.0 5.0ECA1EM222( )200500 3300162513000.200.87.57.5ECA1EM332( )100250 47001631.515000.220.87.5ECA1EM472100 68001835.517500.260.87.5ECA1EM6825035475111300.140.5 2.0 5.0 2.5ECA1VM470( )2002000 100 6.311.22100.140.5 2.5 5.0 2.5ECA1VM101( )2002000 220811.53500.140.6 3.5 5.0ECA1VM221( )2001000Endurance : 85 °C 2000 hWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.W.V.Cap.(±20 %)Part N o.Dia.LengthRippleCurrent(120 Hz)(+85 °C)tan δ(120 Hz)(+20 °C)LeadDia.Lead SpaceStraightLeadsTapingStraightTaping✽BTaping✽i(V)(µF)(mm)(mm)(mA r.m.s.)(mm)(mm)(mm)(mm)(pcs)(pcs)353301012.54400.140.6 5.0 5.0ECA1VM331( )200500 47010165500.140.6 5.0 5.0ECA1VM471( )200500 100012.5209000.140.6 5.0 5.0ECA1VM102( )200500 2200162512500.160.87.57.5ECA1VM222( )100250 33001631.514000.180.87.5ECA1VM332100 47001835.516000.200.87.5ECA1VM47250500.1511 1.30.120.5 2.0 5.0 2.5ECA1HM0R1( )2002000 0.22511 2.90.120.5 2.0 5.0 2.5ECA1HMR22( )2002000 0.33511 4.40.120.5 2.0 5.0 2.5ECA1HMR33( )2002000 0.4751150.120.5 2.0 5.0 2.5ECA1HMR47( )2002000 1511100.120.5 2.0 5.0 2.5ECA1HM010( )20020002.2511200.120.5 2.0 5.0 2.5ECA1HM2R2( )20020003.3511350.120.5 2.0 5.0 2.5ECA1HM3R3( )20020004.7511450.120.5 2.05.0 2.5ECA1HM4R7( )2002000 10511650.120.5 2.0 5.0 2.5ECA1HM100( )2002000 225111000.120.5 2.0 5.0 2.5ECA1HM220( )2002000 335111100.120.5 2.0 5.0 2.5ECA1HM330( )2002000 476.311.21300.120.5 2.5 5.0 2.5ECA1HM470( )2002000 100811.52500.120.6 3.5 5.0ECA1HM101( )2001000 2201012.54000.120.6 5.0 5.0ECA1HM221( )200500 33010165000.120.6 5.0 5.0ECA1HM331( )200500 47010206500.120.6 5.0 5.0ECA1HM471( )200500 100012.52510500.120.6 5.0 5.0ECA1HM102( )200500 22001631.513000.140.87.5ECA1HM222100 33001835.515000.160.87.5ECA1HM332506310511700.110.5 2.0 5.0 2.5ECA1JM100( )2002000 225111050.110.5 2.0 5.0 2.5ECA1JM220( )2002000 33 6.311.21300.110.5 2.5 5.0 2.5ECA1JM330( )2002000 47 6.311.21600.110.5 2.5 5.0 2.5ECA1JM470( )2002000 100811.52700.110.6 3.5 5.0ECA1JM101( )2001000 22010164500.110.6 5.0 5.0ECA1JM221( )200500 33010205500.110.6 5.0 5.0ECA1JM331( )200500 47012.5207500.110.6 5.0 5.0ECA1JM471( )200500 1000162511000.110.87.57.5ECA1JM102( )100250 22001835.514000.130.87.5ECA1JM222501000.47511100.100.5 2.0 5.0 2.5ECA2AMR47( )2002000 1511200.100.5 2.0 5.0 2.5ECA2AM010( )20020002.2511300.100.5 2.0 5.0 2.5ECA2AM2R2( )20020003.3511400.100.5 2.0 5.0 2.5ECA2AM3R3( )20020004.7511500.100.5 2.05.0 2.5ECA2AM4R7( )2002000 10511700.100.5 2.0 5.0 2.5ECA2AM100( )2002000 226.311.21150.100.5 2.5 5.0 2.5ECA2AM220( )2002000Endurance : 85 °C 2000 hWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.W.V.Cap.(±20 %)Part N o.Dia.LengthRippleCurrent(120 Hz)(+85 °C)tan δ(120 Hz)(+20 °C)LeadDia.Lead SpaceStraightLeadsTapingStraightTaping✽BTaping✽i(V)(µF)(mm)(mm)(mA r.m.s.)(mm)(mm)(mm)(mm)(pcs)(pcs)10033811.51450.100.6 3.5 5.0ECA2AM330( )2001000 47811.51800.100.6 3.5 5.0ECA2AM470( )2001000 10010163500.100.6 5.0 5.0ECA2AM101( )200500 22012.5205500.100.6 5.0 5.0ECA2AM221( )200500 33012.5257000.100.6 5.0 5.0ECA2AM331( )200500 47016259000.100.87.57.5ECA2AM471( )100250 10001835.513000.100.87.5ECA2AM102501601 6.311.2360.160.5 2.5 5.0 2.5ECA2CM010( )20020002.2 6.311.2530.160.5 2.5 5.0 2.5ECA2CM2R2( )20020003.3 6.311.2660.160.5 2.5 5.0 2.5ECA2CM3R3( )20020004.7 6.311.2780.160.5 2.55.0 2.5ECA2CM4R7( )2002000 101012.51050.160.6 5.0 5.0ECA2CM100( )200500 2210161750.160.6 5.0 5.0ECA2CM220( )200500 3310202350.160.6 5.0 5.0ECA2CM330( )200500 4712.5203200.160.6 5.0 5.0ECA2CM470( )200500 10012.5255150.160.6 5.0 5.0ECA2CM101( )200500 2201631.58300.160.87.5ECA2CM221100 3301831.510900.160.87.5ECA2CM33150 470184014400.160.87.5ECA2CM471502001 6.311.2340.180.5 2.5 5.0 2.5ECA2DM010( )20020002.2 6.311.2500.180.5 2.5 5.0 2.5ECA2DM2R2( )20020003.3 6.311.2620.180.5 2.5 5.0 2.5ECA2DM3R3( )20020004.7811.5860.180.6 3.55.0ECA2DM4R7( )2001000 101012.51000.180.6 5.0 5.0ECA2DM100( )200500 2210201800.180.6 5.0 5.0ECA2DM220( )200500 3310202200.180.6 5.0 5.0ECA2DM330( )200500 4712.5203000.180.6 5.0 5.0ECA2DM470( )200500 10016254750.180.87.57.5ECA2DM101( )100250 2201831.58350.180.87.5ECA2DM22150 330184011400.180.87.5ECA2DM331502501 6.311.2340.180.5 2.5 5.0 2.5ECA2EM010( )20020002.2 6.311.2500.180.5 2.5 5.0 2.5ECA2EM2R2( )20020003.3811.5720.180.6 3.5 5.0ECA2EM3R3( )20010004.7811.5860.180.6 3.55.0ECA2EM4R7( )2001000 1010161100.180.6 5.0 5.0ECA2EM100( )200500 2210201800.180.6 5.0 5.0ECA2EM220( )200500 3312.5202500.180.6 5.0 5.0ECA2EM330( )200500 4712.5253300.180.6 5.0 5.0ECA2EM470( )200500 1001631.55300.180.87.5ECA2EM101100 22018409300.180.87.5ECA2EM221503501 6.311.2320.200.5 2.5 5.0 2.5ECA2VM010( )20020002.2811.5550.200.63.5 5.0ECA2VM2R2( )2001000Endurance : 85 °C 2000 hWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm.W.V.Cap.(±20 %)Part N o.Dia.LengthRippleCurrent(120 Hz)(+85 °C)tan δ(120 Hz)(+20 °C)LeadDia.Lead SpaceStraightLeadsTapingStraightTaping✽BTaping✽i(V)(µF)(mm)(mm)(mA r.m.s.)(mm)(mm)(mm)(mm)(pcs)(pcs)3503.3811.5600.200.6 3.5 5.0ECA2VM3R3( )20010004.71012.5650.200.65.0 5.0ECA2VM4R7( )200500 1010201150.200.6 5.0 5.0ECA2VM100( )200500 2212.5201950.200.6 5.0 5.0ECA2VM220( )200500 3316253000.200.87.57.5ECA2VM330( )100250 4716253250.200.87.57.5ECA2VM470( )100250 1001831.55350.200.87.5ECA2VM101504001 6.311.2320.200.5 2.5 5.0 2.5ECA2GM010( )20020002.2811.5500.200.63.5 5.0ECA2GM2R2( )20010003.31012.5540.200.6 5.0 5.0ECA2GM3R3( )2005004.71016720.200.65.0 5.0ECA2GM4R7( )200500 1010201150.200.6 5.0 5.0ECA2GM100( )200500 2212.5252150.200.6 5.0 5.0ECA2GM220( )200500 3316252750.200.87.57.5ECA2GM330( )100250 471631.53500.200.87.5ECA2GM470100 10018406000.200.87.5ECA2GM101504501811.5370.200.6 3.5 5.0ECA2WM010( )20010002.21012.5440.200.6 5.0 5.0ECA2WM2R2( )2005003.31016600.200.6 5.0 5.0ECA2WM3R3( )2005004.71020790.200.65.0 5.0ECA2WM4R7( )200500 1012.5201300.200.6 5.0 5.0ECA2WM100( )200500 2216252100.200.87.57.5ECA2WM220( )100250 331631.52850.200.87.5ECA2WM330100Endurance : 85 °C 2000 hWhen requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide.。