APBD3224ESGC中文资料
AXIS P3224-LVE网络摄像头说明书
DatasheetAXIS P3224-LVE Network CameraOutdoor-ready and optimized for forensic video in HDTV720p AXIS P3224-LVE is an outdoor-ready,streamlined fixed dome providing HDTV720p video quality.It features a varifocal lens and remote zoom and focus,which eliminates the need for hands-on fine tuning.The day and night functionality, together with OptimizedIR and P-Iris control,ensure superb image quality in any lighting conditions.Axis’built-in IR solution,OptimizedIR,automatically adapts to the zoom level set at installation,ensuring an evenly illuminated image. WDR–Forensic Capture increases forensic usability by highlighting details in both dark and well lit areas.Zipstream lowers bandwidth and storage requirements.AXIS P3224-LVE is IK10-rated,making it resistant to vandalism.>HDTV720p video quality>Outdoor-ready and IK10-rated>Remote zoom and focus>WDR-Forensic Capture>OptimizedIR illumination>Axis’Zipstream technologyAXIS P3224-LVE Network Camera CameraImage sensor Progressive scan RGB CMOS1/2.8”Lens Varifocal,3.0–10.5mm,F1.4Horizontal angle of view92°–34°Vertical angle of view50°–20°Remote focus and zoom,P-Iris control,IR correctedDay and night Automatically removable infrared-cut filterMinimum illumination HDTV720p25/30fps with WDR-Forensic Capture: Color:0.25lux,F1.4B/W:0.05lux,F1.4,0lux with IR illumination on HDTV720p50/60fps:Color:0.5lux,F1.4B/W:0.1lux,F1.4,0lux with IR illumination onShutter time1/142850s to2sCamera angleadjustmentPan±180°,tilt-5to+75°,rotation±95°VideoVideo compression H.264Baseline,Main and High Profile(MPEG-4Part10/AVC) Motion JPEGResolutions1280x960to160x90Frame rate With WDR:25/30fps with power line frequency50/60HzWithout WDR:50/60fps with power line frequency50/60Hz Video streaming Multiple,individually configurable streams in H.264and Motion JPEGAxis'Zipstream technology in H.264Controllable frame rate and bandwidth,VBR/MBR H.264Multi-viewstreaming2individually cropped out view areasImage settings Compression,Color,Brightness,Sharpness,Contrast,Whitebalance,Exposure control(including automatic gain control),Exposure zones,Backlight compensation,Fine tuning of behaviorat low light,WDR-Forensic Capture:Up to120dB dependingon scene,Local contrast,Text and image overlay,Mirroring ofimages,Privacy masksRotation:0°,90°,180°,270°,including Corridor FormatPan/Tilt/Zoom Digital PTZNetworkSecurity Password protection,IP address filtering,HTTPS a encryption,IEEE802.1X a network access control,Digest authentication,Useraccess log,Centralized Certificate ManagementSupported protocols IPv4/v6,HTTP,HTTPS a,SSL/TLS a,QoS Layer3DiffServ,FTP, CIFS/SMB,SMTP,Bonjour,UPnP TM,SNMP v1/v2c/v3(MIB-II), DNS,DynDNS,NTP,RTSP,RTP,SFTP,TCP,UDP,IGMP,RTCP,ICMP, DHCP,ARP,SOCKS,SSHSystem integrationApplication Programming Interface Open API for software integration,including VAPIX®and AXIS Camera Application Platform;specifications at AXIS Video Hosting System(AVHS)with One-Click Connection ONVIF Profile S,specification at Analytics Video motion detection,Active tampering alarmSupport for AXIS Camera Application Platform enablinginstallation of AXIS Video Motion Detection3,AXIS Cross LineDetection,AXIS Digital Autotracking and third-party applications,see /acapEvent triggers Analytics,Edge storage eventsEvent actions File upload:FTP,SFTP,HTTP,HTTPS,network share and emailNotification:email,HTTP,HTTPS,TCP and SNMP trapVideo recording to edge storagePre-and post-alarm video bufferingSend video clipOverlay textIR illumination on/offData streaming Event dataBuilt-ininstallation aidsRemote zoom,Remote focus,Pixel counter,OptimizedIR withadjustable IR illumination angle and intensityGeneralCasing Aluminum inner camera module with encapsulated electronicsIP66-and NEMA4X-rated,IK10impact-resistant casing withdehumidifying membraneColor:white NCS S1002-BFor repainting instructions of skin cover or casing and impact onwarranty,contact your Axis partner.Memory512MB RAM,256MB FlashPower Power over Ethernet IEEE802.3af/802.3at Type1Class3,max10.8W,typical3.9WConnectors RJ4510BASE-T/100BASE-TX PoEIR illumination OptimizedIR with power-efficient,long-life850nm IR LEDs with adjustable angle of illumination and intensity.Range of reach upto25m(82ft)depending on sceneEdge storage Support for microSD/microSDHC/microSDXC cardSupport for recording to dedicated network-attached storage(NAS)For SD card and NAS recommendations see Operatingconditions-30°C to50°C(-22°F to122°F)Humidity10to100%RH(condensing)Storageconditions-40°C to65°C(-40°F to149°F)Approvals EN55022Class B,EN61000-6-1,EN61000-6-2,EN55024,EN50121-4,IEC62236-4,FCC Part15Subpart B Class A and B,ICES-003Class B,VCCI Class B,C-tick AS/NZS CISPR22Class B,KCC KN22Class B,KN24IEC/EN/UL60950-1,IEC/EN/UL60950-22,IEC/EN62471IEC60068-2-1,IEC60068-2-2,IEC60068-2-14IEC60068-2-6(vibration),IEC60068-2-27(shock),IEC60068-2-30,IEC60068-2-78,IEC/EN60529IP66,NEMA250Type4X,IEC/EN62262IK10Dimensions Height:104mm(41/16in)ø149mm(57/8in)Weight770g(1.7lb)IncludedaccessoriesInstallation Guide,Windows decoder1-user license,Mountingbracket,Cable gasket,Resistorx T20L-key,Drill template OptionalaccessoriesAXIS ACI Conduit Bracket AAXIS ACI Conduit AdaptersAXIS T94M01L Recessed Mount KitAXIS T94T01D Pendant Kit including weather shieldAXIS T91MountsAXIS T98A17-VE Surveillance CabinetVideomanagementsoftwareAXIS Camera Companion,AXIS Camera Station,Videomanagement software from Axis’Application DevelopmentPartners available on /techsup/software Warranty Axis3-year warranty and AXIS Extended Warranty option,see/warrantya.This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.(),and cryptographic software written by Eric Young(*****************).More information is available at ©2015Axis Communications AB.AXIS COMMUNICATIONS,AXIS,ETRAX,ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions.All other company names and products are trademarks or registered trademarks of their respective companies.We reserve the right to introduce modifications without notice.1 4 9 9 9 6 7 / E N / M 3 . 2 / 0 8 2 0 1 5。
DVP ES 说明书
DVP-ES2 操作手册 - 硬件篇目录1简介1.1 产品部位功能介绍........................................................................................................1-21.1.1 主机....................................................................................................................1-21.1.2 数字量输入/输出模块..........................................................................................1-41.1.3 特殊输入/输出模块.............................................................................................1-71.2 一般规格.......................................................................................................................1-81.2.1 主机....................................................................................................................1-81.2.2 数字量输入/输出模块........................................................................................1-101.2.3 特殊输入/输出模块...........................................................................................1-121.3 外观尺寸.....................................................................................................................1-181.3.1 主机................................................................................................................ 1-181.3.2 数字量输入/输出模块........................................................................................1-181.3.3 特殊输入/输出模块...........................................................................................1-191.4 输入∕输出端子台配置...............................................................................................1-201.4.1 主机................................................................................................................ 1-201.4.2 数字量输入/输出模块........................................................................................1-211.4.3 特殊输入/输出模块...........................................................................................1-231.5 PLC 编辑软件............................................................................................................1-251.5.1 WPLSoft:..........................................................................................................1-251.5.2 ISPSoft:............................................................................................................1-26 2简易操作2.1 PC连接PLC................................................................................................................2-22.1.1 在编辑软件通讯设定选项中设定正确通讯格式与站号........................................2-22.1.2 PLC通讯格式出厂默认值...................................................................................2-22.1.3 PLC COM1(RS-232) 脚位定义..........................................................................2-22.1.4 通讯连接线配线图..............................................................................................2-32.2 主机的扩充...................................................................................................................2-52.2.1 主机供应电流与消耗电流 (+24VDC).................................................................2-52.2.2 数字量输入/输出模块供应电流与消耗电流 (+24VDC).......................................2-52.2.3 特殊输入/输出模块消耗电流 (+24VDC).............................................................2-6i2.2.4 系统最大消耗电流计算......................................................................................2-62.3 数字量输入/输出点数配置............................................................................................2-72.3.1 外部输入/输出接点的编号及功能[X] / [Y].........................................................2-72.3.2 主机数字量输入/输出点数配置..........................................................................2-72.3.3 数字量输入/输出模块点数配置..........................................................................2-72.3.4 数字量输入/输出点数配置范例..........................................................................2-82.4 特殊输入/输出模块配置...............................................................................................2-82.4.1 配置说明............................................................................................................2-82.4.2 混合配置范例.....................................................................................................2-92.4.3 特殊寄存器D9900 ~ D9999使用说明...............................................................2-9 3安装3.1 盘内安装......................................................................................................................3-23.2 系统组合......................................................................................................................3-23.3 安装方法......................................................................................................................3-33.4 配线端子......................................................................................................................3-54电源配线4.1 电源规格......................................................................................................................4-24.2 接地.............................................................................................................................4-24.3 电源输入配线...............................................................................................................4-34.4 安全配线回路...............................................................................................................4-45数字量输入配线5.1 漏型式及源型式...........................................................................................................5-25.2 24VDC 输入形式.........................................................................................................5-25.2.1 ES2 主机数字量输入点电气规格......................................................................5-25.2.2 数字量输入/输出模块数字量输入点电气规格.....................................................5-35.3 开关配线......................................................................................................................5-45.3.1 继电器形式........................................................................................................5-45.3.2 开集极输入形式.................................................................................................5-45.3.3 2线式近接开关..................................................................................................5-55.3.4 3线式开关.........................................................................................................5-6 ii5.3.5 光电开关.............................................................................................................5-6 6数字量输出配线6.1 数字量输出电气规格.....................................................................................................6-26.1.1 ES2 主机数字量输出电气规格...........................................................................6-26.1.2 数字量输入/输出模块数字量输出电气规格.........................................................6-36.2 输出回路(继电器及晶体管).........................................................................................6-36.3 继电器输出回路配线.....................................................................................................6-36.4 晶体管输出回路配线.....................................................................................................6-66.5 晶体管输出回路配线.....................................................................................................6-77模拟量输入/输出模块配线7.1 模拟量输入/输出模块....................................................................................................7-27.2 模拟量输入/输出模块规格............................................................................................7-27.2.1 DVP04AD-E2规格.............................................................................................7-27.2.2 DVP02DA-E2／DVP04DA-E2规格...................................................................7-37.2.3 DVP06XA-E2规格.............................................................................................7-47.2.4 DVP04PT-E2规格.............................................................................................7-57.2.5 DVP04TC-E2规格.............................................................................................7-67.3 模拟量输入/输出模块配线............................................................................................7-87.3.1 DVP04AD-E2 配线............................................................................................7-87.3.2 DVP02DA-E2／DVP04DA-E2配线...................................................................7-97.3.3 DVP06XA-E2配线...........................................................................................7-107.3.4 DVP04PT-E2配线...........................................................................................7-117.3.5 DVP04TC-E2配线...........................................................................................7-128试运转与故障排除8.1 试运转..........................................................................................................................8-28.1.1 送电前检查.........................................................................................................8-28.1.2 运转及测试.........................................................................................................8-28.2 异常现象之判断方法.....................................................................................................8-28.2.1 电源指示「POWER」指示灯[亮 / 灭].............................................................8-28.2.2 PLC运转「RUN」指示灯[亮 / 灭]....................................................................8-38.2.3 错误「ERROR」指示灯[亮 / 闪烁 / 灭].........................................................8-3iii8.2.4 通讯端口COM1 ~ COM3指示灯[亮 / 灭].......................................................8-38.2.5 输入点指示灯[亮 / 灭].....................................................................................8-38.2.6 输出点指示灯[亮 / 灭].....................................................................................8-38.3 侦错码原因对照表........................................................................................................8-48.4 定期检查......................................................................................................................8-6 iv1-1简介DVP-ES2 系列可编程控制器。
恒基电子科技 电子燃烧保护器 型号 ESA-100说明书
Days0 1 2 3 4 5 6 7 8 9 0 1.000 0.998 0.996 0.993 0.991 0.989 0.987 0.985 0.982 0.980 10 0.978 0.976 0.974 0.972 0.969 0.967 0.965 0.963 0.961 0.959 20 0.957 0.954 0.952 0.950 0.948 0.946 0.944 0.942 0.940 0.938 30 0.936 0.934 0.931 0.929 0.927 0.925 0.923 0.921 0.919 0.917 40 0.915 0.913 0.911 0.909 0.907 0.905 0.903 0.901 0.899 0.897 50 0.895 0.893 0.891 0.889 0.887 0.885 0.883 0.881 0.879 0.877 60 0.875 0.873 0.871 0.870 0.868 0.866 0.864 0.862 0.860 0.858 70 0.856 0.854 0.852 0.850 0.849 0.847 0.845 0.843 0.841 0.839 80 0.837 0.835 0.834 0.832 0.830 0.828 0.826 0.824 0.823 0.821 90 0.819 0.817 0.815 0.813 0.812 0.810 0.808 0.806 0.805 0.803 100 0.801 0.799 0.797 0.796 0.794 0.792 0.790 0.789 0.787 0.785 110 0.783 0.782 0.780 0.778 0.776 0.775 0.773 0.771 0.770 0.768 120 0.766 0.764 0.763 0.761 0.759 0.758 0.756 0.754 0.753 0.751 130 0.749 0.748 0.746 0.744 0.743 0.741 0.739 0.738 0.736 0.735 140 0.733 0.731 0.730 0.728 0.726 0.725 0.723 0.722 0.720 0.718 150 0.717 0.715 0.714 0.712 0.710 0.709 0.707 0.706 0.704 0.7031600.7010.7000.6980.6960.6950.6930.6920.6900.6890.687P hysical data Principal radiation emissions (1) Gamma: 0.835 MeV (100%)Auger electron: 0.005 MeV (64%) K x-ray: 0.005 MeV (18%)Unshielded exposure rate at 1 cm from a 1 mCi point source: 4 R/h (2)Unshielded exposure rate at 1 m from a 1 MBq point source: 32 nC/kg/hHalf-value layer for lead shielding: 0.72 cm (0.28 in)(2)Occupational limits(3)Annual limit on intake: 2 mCi (74 MBq) for oral ingestion and 800 µCi (30 MBq) for inhalationDerived air concentration: 3 x 10-7 µCi/ml (11 kBq/m 3)DosimetryGamma emissions from 54Mn present an external dose hazard. It may be assumed that 35% of uptake of 54Mn transfers to the bone and is retained with a biological half-life of 40 days. 10% and 15% of the uptake transfers to the liver and is retained with biological half-lives of 4 days and 40 days respectively, and 20% and 20% of the uptake is distributed uniformly to other organs and tissues of the body and retained with biological half-lives of 4 days and 40 days respectively (4).Decay tablePhysical half-life: 312.7 days (1).To use the decay table, find the number of days in the top and left hand columns of the chart, then find the corresponding decay factor. To obtain a precalibration number, divide by the decay factor. For a postcalibration number, multiply by the decay factor. Visit /toolkit to use our online Radioactive Decay Calculator.D a y sFor a complete listing of our global offices, visit /ContactUsCopyright ©2007-2010, PerkinElmer, Inc. All rights reserved. PerkinElmer ® is a registered trademark of PerkinElmer, Inc. All other trademarks are the property of their respective owners.007038B_01 Jul 2010PerkinElmer, Inc. 940 Winter StreetWaltham, MA 02451 USA P: (800) 762-4000 or (+1) 203-925-4602General handling precautions for Manganese-541. D esignate area for handling 54Mn and clearly label all containers.2. Store 54Mn behind thick lead shields.3. Wear extremity and whole body dosimeters while handlingmCi (37 MBq) quantities.4. Use shielding to minimize exposure while handling 54Mn.5. Use tools to indirectly handle unshielded sources andpotentially contaminated vessels.6. Prohibit eating, drinking, smoking and mouth pipetting inroom where 54Mn is handled.7. Use transfer pipets, spill trays and absorbent coverings toconfine contamination.8. Handle potentially volatile compounds in ventilated enclosures.9. S ample exhausted effluent and room air by continuouslydrawing a known volume through membrane filters.10. W ear lab coat, wrist guards and disposable gloves forsecondary protection.11. M aintain contamination and exposure control by regularlymonitoring and promptly decontaminating gloves and surfaces.12. Use end-window Geiger-Mueller detector, NaI(Tl) detectoror liquid scintillation counter to detect 54Mn.13. Submit urine sample for bioassay from 4 to 24 hours afterhandling 54Mn to indicate uptake by personnel.14. I solate waste in clearly labeled, shielded containers anddispose of according to approved guidelines.15. E stablish air concentration, surface contamination and bio-assay action levels below regulatory limits. Investigate andcorrect any conditions which may cause these levels to be exceeded.16. O n completing an operation, secure all 54Mn; remove anddispose of protective clothing and coverings; monitor and decontaminate self and surfaces; wash hands and monitor them again.Only a small fraction of 54Mn in the body is excreted in the urine. Whole body counting or fecal analysis are alternative bioassay methods that can be more sensitive than urinalysis.References1. K ocher, David C., Radioactive Decay Data Tables, Springfield:National Technical Information Service, 1981 DOE/TIC-11026.2. Calculated with computer code “Gamma” utilizing decayscheme data from Kocher (1) and mass attenuation coefficients for lead and mass energy absorption coefficients for air from the Radiological Health Handbook, Washington: Bureau of Radiological Health, 1970. The HVL reported here is the initial HVL for narrow beam geometry.3. U.S. Nuclear Regulatory Commission. 10 CFR 20 Appendix B –Standards for Protection Against Radiation, 1994.4. ICRP Publication 30, Part 1, Limits for Intakes of Radionuclidesby Workers. Pergamon Press, Oxford, 1979.PerkinElmer has developed the following suggestions for handling Manganese-54after years of experience working with this high-energy gamma emitter.。
集成电路型号功能对照表20页word文档
集成电路型号功能对照表0206A 天线开关集成电路03VFG9 发射压控振荡集成电路1021AC 发射压控振荡集成电路1097C 升压集成电路140N 电源取样比较放大集成电路14DN363 伺服控制集成电路15105 充电控制集成电路15551 管理卡升压集成电路1710 视频信号处理集成电路1N706 混响延时集成电路20810－F6096 存储集成电路2252B 微处理集成电路2274 延迟集成电路24C01ACEA 存储集成电路24C026 存储集成电路24C04 存储集成电路24C64 码片集成电路24LC16B 存储集成电路24LC65 电可改写编程只读存储集成电路27C1000PC－12 存储集成电路27C2000QC－90 存储集成电路27C20T 存储集成电路27C512 电可改写编程只读存储集成电路2800 红外遥控信号接收集成电路28BV64 码片集成电路28F004 版本集成电路31085 射频电源集成电路32D54 电源、音频信号处理集成电路32D75 电源、音频信号处理集成电路32D92 电源中频放大集成电路4066B 电子开关切换集成电路4094 移位寄存串入、并出集成电路424260SDJ 存储集成电路4260 动态随机存储集成电路4270351/91B9905 中频放大集成电路4370341/90M9919 中频处理集成电路4464 存储集成电路4558 双运算放大集成电路4580D 双运算放大集成电路47C1638AN－U337 微处理集成电路47C1638AU－353 微处理集成电路47C432GP 微处理集成电路47C433AN－3888 微处理集成电路49/4CR1A 中频放大集成电路5101 天线开关集成电路5G052 发光二极管四位显示驱动集成电路5G24 运算放大集成电路5W01 双运算放大集成电路649/CRIA70612 中频放大集成电路673/3CR2A 多模转换集成电路74122 可重触发单稳态集成电路74HC04 逻辑与非门集成电路74HC04D 六反相集成电路74HC123 单稳态集成电路74HC125 端口功能扩展集成电路74HC14N 六反相集成电路74HC157A 多路转换集成电路74HC165 移相寄存集成电路74HC245 总线收发集成电路74HC32 或门四2输入集成电路74HC374八D 触发集成电路74HC573D 存储集成电路74HCT157 多路转换双输入集成电路74HCT4046A 压控振荡集成电路74HCT4538D 单稳态集成电路74HCT4538N 触发脉冲集成电路74HCT86D 异或门四2输入集成电路74HCU04 与非门集成电路74LS125 端口功能扩展集成电路74LS373 锁存集成电路74LS393 计数双四位二进制集成电路74LS74双D 触发集成电路78014DFP 系统控制处理集成电路811N 伴音阻容偏置集成电路83D33 压控振荡集成电路85712 场扫描信号校正处理集成电路85713 行扫描信号校正集成电路87C52 微处理集成电路87CK38N－3584 微处理集成电路87CK38N－3627 微处理集成电路89C52 系统控制处理集成电路89C55 系统控制处理集成电路93C66 电可改写编程只读存储集成电路93LC56 电可改写编程存储集成电路9821K03 系统控制集成电路A1642P 背景歌声消除集成电路A701 红外遥控信号接收集成电路A7950 场频识别集成电路A8772AN 色差信号延迟处理集成电路A9109 功率放大集成电路AAB 电源集成电路ACA650 色度信号解调集成电路ACFP2 色度、亮度信号分离集成电路ACP2371 多伴音、多语言改善集成电路ACVP2205 色度、亮度信号分离集成电路AD1853 立体声数/模转换集成电路AD1858 音频解调集成电路AD722 视频编码集成电路ADC2300E 音频数/模转换集成电路ADC2300J 音频数/模转换集成电路ADC2310E 音频数/模转换集成电路ADV7172 视频编码集成电路ADV7175A 视频编码集成电路AE31201 频率显示集成电路AJ7080 射频调制集成电路AK4321－VF－E1 音频数/模转换集成电路AN1319 双高速电压比较集成电路AN1358S 双运算放大集成电路AN1393 双运算放大集成电路AN1431T 稳压电源集成电路AN1452 音频前置放大集成电路AN1458S 双运算放大集成电路AN206 伴音中频及前置放大集成电路AN222 自动频率控制集成电路AN236 副载波信号处理集成电路AN239Q 图像、伴音中频放大集成电路AN247P 图像中频放大、AGC控制集成电路AN253P 调频/调幅中频放大集成电路AN262 音频前置放大集成电路AN2661NK 视频信号处理集成电路AN2663K 视频信号处理集成电路AN272 音频功率放大集成电路AN2751FAP 视频信号处理集成电路AN281 色度解码集成电路AN2870FC 多功能控制集成电路AN295 行、场扫描信号处理集成电路AN301 伺服控制集成电路AN305 视频自动增益控制集成电路AN306 色度自动相位控制集成电路AN318 直流伺服控制集成电路AN320 频率控制、调谐显示驱动集成电路AN3215K 视频信号处理集成电路AN3215S 视频信号处理集成电路AN3224K 磁头信号记录放大集成电路AN3248NK 亮度信号记录、重放处理集成电路AN331 视频信号处理集成电路AN3311K 磁头信号放大集成电路AN3313 磁头信号放大集成电路AN3321S 录像重放信号处理集成电路AN3331K 磁头信号处理集成电路AN3337NSB 磁头信号放大集成电路AN3380K 磁头信号处理集成电路AN3386NK 磁头信号处理集成电路AN3495K 色度、亮度信号降噪集成电路AN355 伴音中频放大、检波集成电路AN3581S 视频驱动集成电路AN366 调频/调幅中频放大集成电路AN3791 移位控制集成电路AN3792 磁鼓伺服控制接口集成电路AN3795 主轴伺服控制接口集成电路AN3814K 电机驱动集成电路AN4265 音频功率放大集成电路AN4558 运算放大集成电路AN5010 电子选台集成电路AN5011 电子选台集成电路AN5015K 电子选台集成电路AN5020 红外遥控信号接收集成电路AN5025S 红外遥控信号接收集成电路AN5026K 红外遥控信号接收集成电路AN5031 电调谐控制集成电路AN5034 调谐控制集成电路AN5036 调谐控制集成电路AN5043 调谐控制集成电路AN5071 频段转换集成电路AN5095K 电视信号处理集成电路AN5110 图像中频放大集成电路AN5130 图像中频、视频检波放大集成电路AN5138NK 图像、伴音中频放大集成电路AN5156K 电视信号处理集成电路AN5177NK 图像、伴音中频放大集成电路AN5179K 图像、伴音中频放大集成电路AN5183K 中频信号处理集成电路AN5195K 中频、色度、扫描信号处理集成电路AN5215 伴音信号处理集成电路AN5520 伴音中频放大及鉴频集成电路AN5222 伴音中频放大集成电路AN5250 伴音中频放大、鉴频及功率放大集成电路AN5262 音频前置放大集成电路AN5265 音频功率放大集成电路AN5270 音频功率放大集成电路AN5273 双声道音频功率放大集成电路AN5274 双声道音频功率放大集成电路AN5275 中置、3D放大集成电路AN5285K 双声道前置放大集成电路AN5295NK 音频信号切换集成电路AN5312 视频、色度信号处理集成电路AN5313NK 视频、色度信号处理集成电路AN5342 图像水平轮廓校正集成电路AN5342FB 水平清晰度控制集成电路AN5344FBP 色度信号处理集成电路AN5348K 人工智能信号处理集成电路AN5385K 色差信号放大集成电路AN5410 行、场扫描信号处理集成电路AN5421 同步检测集成电路AN5422 行、场扫描信号处理集成电路AN5512 场扫描输出集成电路AN5515 场扫描输出集成电路AN5521 场扫描输出集成电路AN5532 场扫描输出集成电路AN5534 场扫描输出集成电路AN5551 枕形校正集成电路AN5560 场频识别集成电路AN5600K 中频、亮度、色度及扫描信号处理集成电路AN5601K 视频、色度、同步信号处理集成电路AN5607K 视频、色度、行场扫描信号处理集成电路AN5615 视频信号处理集成电路AN5620X 色度信号处理集成电路AN5621 场扫描输出集成电路AN5625 色度信号处理集成电路AN5633K 色度信号处理集成电路AN5635 色度解码集成电路AN5635NS 色度解码集成电路AN5637 色度解码、亮度延迟集成电路AN5650 同步信号分离集成电路AN5682K 基色电子开关切换集成电路AN5693K 视频、色度、行场扫描信号处理集成电路AN5712 图像中频放大、AGC控制集成电路AN5722 图像中频放大、检波集成电路AN5732 伴音中频放大、鉴频集成电路AN5743 音频功率放大集成电路AN5750 行自动频率控制及振荡集成电路AN5757S 行扫描电源电压控制集成电路AN5762 场扫描振荡、输出集成电路AN5764 光栅水平位置控制集成电路AN5765 电源稳压控制集成电路AN5767 同步信号处理集成电路AN5768 光栅倾斜校正控制集成电路AN5769 行、场会聚控制集成电路AN5790N 行扫描信号处理集成电路AN5791 同步脉冲相位与脉宽调整集成电路AN5803 双声道立体声解调集成电路AN5836 双声道前置放大集成电路AN5858K 视频信号控制集成电路AN5862 视频信号控制集成电路AN5862S－E1 视频信号开关控制集成电路AN5870K 模拟信号切换集成电路AN5891K 音频信号处理集成电路AN614 行枕形校正集成电路AN6210 双声道前置放大集成电路AN6306S 亮度信号处理集成电路AN6308 模拟电子开关集成电路AN6327 视频重放信号处理集成电路AN6341N 伺服控制集成电路AN6342N 基准分频集成电路AN6344 伺服控制集成电路AN6345 分频集成电路AN6346N 磁鼓伺服控制集成电路AN6350 磁鼓伺服控制集成电路AN6357N 主轴接口集成电路AN6361N 色度信号处理集成电路AN6367NK 色度信号处理集成电路AN6371S 自动相位控制集成电路AN6387 电机伺服控制集成电路AN6550 卡拉OK音频放大集成电路AN6554 四运算放大集成电路AN6561 双运算放大集成电路AN6562SG 双运算放大集成电路AN6609N 电机驱动集成电路AN6612 电机稳速控制集成电路AN6650 电机速度控制集成电路AN6651 电机速度控制集成电路AN6652 电机稳速控制集成电路AN6875 发光二极管五位显示驱动集成电路AN6877 发光二极管七位显示驱动集成电路AN6884 发光二极管五位显示驱动集成电路AN6886 发光二极管五位显示驱动集成电路AN6888 发光二极管显示驱动集成电路AN6914 双电压比较集成电路AN7085N5 单片录、放音集成电路AN7105 双声道音频功率放大集成电路AN7106K 双声道音频功率放大集成电路AN7108 单片立体声放音集成电路AN710S 单片放音集成电路AN7110E 音频功率放大集成电路AN7114 音频功率放大集成电路AN7116 音频功率放大集成电路AN7118 双声道音频功率放大集成电路AN7118S 双声道音频功率放大集成电路AN7120 音频功率放大集成电路AN7124 双声道音频功率放大集成电路AN7145 双声道音频功率放大集成电路AN7148 双声道音频功率放大集成电路AN7158N 音频功率放大7.5W×2集成电路AN7161N 音频功率放大集成电路AN7164 双声道音频功率放大集成电路AN7171NK 音频功率放大集成电路AN7205 调频/调谐及高频放大集成电路AN7220 调频/调幅中频放大集成电路AN7222 调频/调幅中频放大集成电路AN7223 调频/调幅中频放大集成电路AN7226 调频/调幅中频放大集成电路AN7256 调频/调谐及中频放大集成电路AN7311 双声道前置放大集成电路AN7312 双声道前置放大集成电路AN7315 双声道前置放大集成电路AN7315S 双声道前置放大集成电路AN7320 音频前置放大集成电路AN7396K 双声道前置放大集成电路AN7397K 双声道前置放大集成电路AN7410 调频立体声多路解码集成电路AN7414 调频立体声解码集成电路AN7420N 调频立体声解码集成电路AN7470 调频立体声解码集成电路AN7805 三端电源稳压＋5V/1A集成电路AN7806 三端电源稳压＋6V/1A集成电路AN7807 三端电源稳压＋7V/1A集成电路AN7808 三端电源稳压＋8V/1A集成电路AN7809 电源稳压＋9V/1A集成电路AN7810 三端电源稳压＋10V/1A集成电路AN7812 三端电源稳压＋12V/1A集成电路AN7815 三端电源稳压＋15V/1A集成电路AN7818 三端电源稳压＋18V/1A集成电路AN7820 三端电源稳压＋20V/1A集成电路AN7824 三端电源稳压＋24V/1A集成电路AN78L05 三端电源稳压＋5V/0.1A集成电路AN78L06 三端电源稳压＋6V/0.1A集成电路AN78L08 三端电源稳压＋8V/0.1A集成电路AN78L09 三端电源稳压＋9V/0.1A集成电路AN78L10 三端电源稳压＋10V/0.1A集成电路AN78L12 三端电源稳压＋12V/0.1A集成电路AN78L15 三端电源稳压＋15V/0.1A集成电路AN78L18 三端电源稳压＋18V/0.1A集成电路AN78L20 三端电源稳压＋20V/0.1A集成电路AN78L24 三端电源稳压＋24V/0.1A集成电路AN78M05 三端电源稳压＋5V/0.5A集成电路AN78M06 三端电源稳压＋6V/0.5A集成电路AN78M08 三端电源稳压＋8V/0.5A集成电路AN78M09 三端电源稳压＋9V/0.5A集成电路AN78M10 三端电源稳压＋10V/0.5A集成电路AN78M12 三端电源稳压＋12V/0.5A集成电路AN78M15 三端固定式稳压＋15V/0.5A集成电路AN78M18 三端电源稳压＋18V/0.5A集成电路AN78M20 三端电源稳压＋20V/0.5A集成电路AN78M24 三端电源稳压＋24V/0.5A集成电路AN7905 三端电源稳压－5V/1A集成电路AN7906 三端电源稳压－6V/1A集成电路AN7908T 三端电源稳压－8V/1A集成电路AN7909T 三端电源稳压－9V/1A集成电路AN7910T 三端电源稳压－10V/1A集成电路AN7912 三端电源稳压－12V/1A集成电路AN7915 三端电源稳压－15V/1A集成电路AN7918 三端电源稳压－18V/1A集成电路AN7920 三端电源稳压－20V/1A集成电路AN7924 三端电源稳压－24V/1A集成电路AN79L05 三端电源稳压－5V/0.1A集成电路AN79L06 三端电源稳压－6V/0.1A集成电路AN79L08 三端电源稳压－8V/0.1A集成电路AN79L09 三端电源稳压－9V/0.1A集成电路AN79L10 三端电源稳压－10V/0.1A集成电路AN79L12 三端电源稳压－12V/0.1A集成电路AN79L15 三端电源稳压－15V/0.1A集成电路AN79L18 三端电源稳压－18V/0.1A集成电路AN79L20 三端电源稳压－20V/0.1A集成电路AN79L24 三端电源稳压－24V/0.1A集成电路AN79M05 三端电源稳压－5V/0.5A集成电路AN79M06 三端电源稳压－6V/0.5A集成电路AN79M08 三端电源稳压－8V/0.5A集成电路AN79M09 三端电源稳压－9V/0.5A集成电路AN79M10 三端电源稳压－10V/0.5A集成电路AN79M12 三端电源稳压－12V/0.5A集成电路AN79M15 三端电源稳压－15V/0.5A集成电路AN79M18 三端电源稳压－18V/0.5A集成电路AN79M20 三端电源稳压－20V/0.5A集成电路AN79M24 三端电源稳压－24V/0.5A集成电路AN8028 自激式开关电源控制集成电路AN8270K 主轴电机控制集成电路AN8280 电机驱动集成电路AN8281S 电机驱动集成电路AN8290S 主轴电机驱动集成电路AN8355S 条形码扫描接收集成电路AN8370S 光电伺服控制集成电路AN8373S 射频伺服处理集成电路AN8375S 伺服处理集成电路AN8389S－E1 电机驱动集成电路AN8480NSB 主轴电机驱动集成电路AN8481SB－E1 主轴电机驱动集成电路AN8482SB 主轴电机驱动集成电路AN8623FBQ 主轴伺服处理集成电路AN8788FB 电机驱动集成电路AN8802CE1V 伺服处理集成电路AN8813NSBS 主轴电机驱动集成电路AN8819NFB 伺服驱动、直流交换集成电路AN8824FBQ 前置放大集成电路AN8825NFHQ－V 聚焦、循迹误差处理集成电路AN8831SC 视频预视放集成电路AN8832SB－E1 射频放大、伺服处理集成电路AN8837SB－E1 伺服处理集成电路AN89C2051－24PC 微处理集成电路APU2400U 音频信号处理集成电路APU2470 音频信号处理集成电路AS4C14405－60JC 动态随机存储1M×4集成电路AS4C256K16ED－60JC 存储集成电路ASD0204－015 图文控制集成电路ASD0204GF－022－3BA显示控制集成电路AT24C08 存储集成电路AT24C08A 存储集成电路AT24C256－10CI 码片集成电路AT27C010 电可改写编程只读存储集成电路AT27C020 存储集成电路ATMEL834 存储集成电路AVM－1 视频信号处理厚膜集成电路AVM－2 音频信号处理厚膜集成电路AVSIBCP08 倍压整流切换集成。
ZGP323LAS2008G中文资料(zilog)中文数据手.
Z8 GP TM微控制器ZGP323L OTP MCU系列初稿产品规格PS023702-1004文档免责声明©2004 ZiLOG公司防护留所有权利.本出版物中关于信息设备,应用程序,或所描述技术目是提出可能用途,并且可以被替代. ZiLOG公司,INC.不承担责任或者提供准确而可靠信息表示,设备,或技术描述这份文件. ZiLOG公司也不承担责任相关以任何方式知识产权侵权信息使用,设备,或技术此处描述或以其他方式.由ZiLOG公司销售设备都属于防护修范围和出现在ZiLOG公司销售条款和条件赔偿责任规定限制. ZiLOG公司让适销性或用于任何目任何防护证.除非ZiLOG公司,利用信息,设备或技术作为生命支持系统中关键部件明确书面许可,没有被授权.转让任何许可证,暗示或以其他方式,通过在本文档中任何知识产权.iii目录发展特色. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1概述. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2引脚说明. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4绝对最大额定值 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10标准测试条件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10直流特性. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11AC 特征. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14引脚功能. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .XTAL1晶体1(基于时间输入. . . . . . . . . . . . . . . . . . . . . . . . . . . . .XTAL2晶体2(基于时间输出. . . . . . . . . . . . . . . . . . . . . . . . . . . .端口0(P07-P00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .端口1(P17-P10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .端口2(P27-P20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .端口3(P37-P30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .RESET (输入,低电平有效. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .功能描述. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .程序存储器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .随机存取存储器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .扩展寄存器文件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .寄存器文件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .堆栈. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .计时器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .计数器/定时器功能模块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16161616171819232323232428293038扩展寄存器文件控制寄存器(0D . . . . . . . . . . . . . . . . . . . . . . . . 64扩展寄存器文件控制寄存器(0F . . . . . . . . . . . . . . . . . . . . . . . . . 69标准控制寄存器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73包装信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80订购信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89Precharacterization 产品. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95iv 图一览图1.图2.图3.图4.图5.图6.图7.图8.图9.图10.图11.图12.图13.图14.图15.图16.图17.图18.图19.图20.图21.图22.图23.图24.图25.图26.图27.图28.图29.图30.图31.图32.图33.图34.功能框图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3计数器/定时器图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420引脚PDIP / SOIC / SSOP / CDIP *引脚配置. . . . . . . . . . . . . .五28引脚PDIP / SOIC / SSOP / CDIP *引脚配置. . . . . . . . . . . . . . 6 40引脚PDIP / CDIP *引脚配置. . . . . . . . . . . . . . . . . . . . . . . . 748引脚SSOP引脚配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8测试负载图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10AC时序图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14P0口配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17端口1配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18端口2配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19端口3配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20端口3计数器/定时器输出配置. . . . . . . . . . . . . . . . . . . 22程序存储器映射(32K OTP. . . . . . . . . . . . . . . . . . . . . . . . . . 24扩展寄存器文件架构. . . . . . . . . . . . . . . . . . . . . . . . 26寄存器指针. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27寄存器指针细节. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29毛刺滤波电路. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38传输模式流程图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398位计数器/定时器电路. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40T8_OUT在单通模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41T8_OUT在模N模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41解调方式计数捕获流程. . . . . . . . . . . . . . . . 42解调模式流程图. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4316位计数器/定时器电路. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44T16_OUT在单通模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . 45T16_OUT在模N模式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45乒乓模式图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47输出电路. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47中断框图. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49振荡器配置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51端口配置寄存器(PCON(只写. . . . . . . . . . . . . . 53STOP模式恢复寄存器. . . . . . . . . . . . . . . . . . . . . . . . . . . 55SCLK线路. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56v图35.图36.图37.图38.图39.图40.图41.图42.图43.图44.图45.图46.图47.图48.图49.图50.图51.图52.图53.图54.图55.图56.图57.图58.图59.图60.图61.图62.图63.图64.图65.图66.图67.图68.停止模式恢复源. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .停止模式恢复寄存器2((0FDH:D2-D4,D6只写.看门狗定时器模式寄存器(只写. . . . . . . . . . . . . . . .复位和看门狗. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TC8控制寄存器((0DO0H:读/写除非另有说明T8和T16共同控制功能((0D01H:读/写. . .T16控制寄存器((0D2H:读/写除非另有说明.T8 / T16控制寄存器(0D03H:读/写(除非另有说明. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .电压检测寄存器. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .端口配置寄存器(PCON(0F00H:只写. . . . . . .停止模式恢复寄存器((0F0BH:D6-D0 =只写,D7 =只读. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .停止模式恢复寄存器2((0F0DH:D2-D4,D6只写看门狗定时器寄存器((0F0FH:只写. . . . . . . . . . . . .端口2模式寄存器(F6H:只写. . . . . . . . . . . . . . . . . . . . .端口3模式寄存器(F7H:只写. . . . . . . . . . . . . . . . . . . . .端口0和1模式寄存器(F8H:只写. . . . . . . . . . . . . . . .中断优先级寄存器(F9H:只写. . . . . . . . . . . . . . . . . .中断请求寄存器(FAH:读/写. . . . . . . . . . . . . . . .中断屏蔽寄存器(FBH:读/写. . . . . . . . . . . . . . . . . . .标志寄存器(FCH:读/写. . . . . . . . . . . . . . . . . . . . . . . . . . .寄存器指针(FDH:读/写. . . . . . . . . . . . . . . . . . . . . . . .堆栈指针高(FEH:读/写. . . . . . . . . . . . . . . . . . . . . .堆栈指针低(FFH:读/写. . . . . . . . . . . . . . . . . . . . . . .20引脚封装CDIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20引脚PDIP封装框图. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20引脚SOIC封装图. . . . . . . . . . . . . . . . . . . . . . . . . . . .20引脚SSOP封装框图. . . . . . . . . . . . . . . . . . . . . . . . . . .28引脚封装CDIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28引脚SOIC封装图. . . . . . . . . . . . . . . . . . . . . . . . . . . .28引脚PDIP封装框图. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28引脚SSOP封装框图. . . . . . . . . . . . . . . . . . . . . . . . . . .40引脚封装CDIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40引脚PDIP封装框图. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48引脚SSOP封装设计. . . . . . . . . . . . . . . . . . . . . . . . . . . .575960616465676869707172737374757677 77787879798081818283848586878788。
Ardisam RC4432 部件说明书
12
29238
13
29240
14
29311
15
29314
16
29317
17
400022
18
400023
19
400024
20
W1265V0903
- 800-345-6007 2
DESCRIPTION
WASHER M10 TONGUE DECK MOUNT
HITCH MOUNT GREEN HANDLE M10 TONGUE LATCH PIN
16
10
DESCRIPTION
BOLT M8 X 25 BOLT M8 X 16
GAS CAP GAS TANK STRAINER GAS TANK MOUNT
CLAMP GAS TANK WASHER M8 WASHER M8
13
QTY. /QTÉ
4 4 1 1 1 4 1 4 4
20
14
14 2
PIN M12 X 64 TONGUE
WASHER M12 BOLT M10 X 100
SHAFT CAP BOLT M12 X 25 ROPE BRACKET ROPE MOUNT
QTY. /QTÉ
3 2 1 1 1 4 2 1 1 1
REF./ PART NO. REP. /° RÉF.
11
2431
© 2021 Ardisam, Inc. All Rights Reserved Tous droits réservés P/N: 33522 SVC: 35840 ECN: 13076 REV 1: 2020-12-09
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
APD3224SYCK-F01, 规格书,Datasheet 资料
REV NO: V.6 CHECKED: Allen Liu
DATE: AUG/19/2011 DRAWN: J.Yu
PAGE: 2 OF 5 ERP: 1203012854
芯天下--/
Super Bright Yellow
APD3224SYCK-F01
SPEC NO: DSAF1089 APPROVED: WYNEC
SPEC NO: DSAF1089 APPROVED: WYNEC
REV NO: V.6 CHECKED: Allen Liu
DATE: AUG/19/2011 DRAWN: J.Yu
PAGE: 1 OF 5 ERP: 1203012854
芯天下--/
Selection Guide
DATE: AUG/19/2011 DRAWN: J.Yu
PAGE: 4 OF 5 ERP: 1203012854
芯天下--/
PACKING & LABEL SPECIFICATIONS
APD3224SYCK-F01
SPEC NO: DSAF1089 APPROVED: WYNEC
Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APD3224SYCK-F01 Super Bright Yellow (AlGaInP) Water Clear 800 Typ. 1300 Viewing Angle [1] 2θ1/2 20°
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%.
MAX3222EEUP中文资料
Battery-Powered Equipment Cell Phones Cell-Phone Data Cables Notebook, Subnotebook, and Palmtop Computers
Applications
Printers Smart Phones xDSL Modems
_______________Ordering Information
PART
TEMP RANGE
PINPACKAGE
PKG CODE
MAX3222ECTP MAX3222ECUP
0°C to +70°C 0°C to +70°C
20 Thin QFNEP** (5mm x 5mm) 20 TSSOP
♦ For Low-Voltage or Data Cable Applications MAX3380E/MAX3381E: +2.35V to +5.5V, 1µA, 2Tx/2Rx, RS-232 Transceivers with ±15kV ESD-Protected I/O and Logic Pins
MAX3222EEPN -40°C to +85°C 18 Plastic DIP —
MAX3232ECAE 0°C to +70°C 16 SSOP
—
MAX3232ECWE 0°C to +70°C 16 Wide SO —
MAX3232ECPE 0°C to +70°C 16 Plastic DIP —
A proprietary low-dropout transmitter output stage delivers true RS-232 performance from a +3.0V to +5.5V power supply, using an internal dual charge pump. The charge pump requires only four small 0.1µF capacitors for operation from a +3.3V supply. Each device guarantees operation at data rates of 250kbps while maintaining RS-232 output levels. The MAX3237E guarantees operation at 250kbps in the normal operating mode and 1Mbps in the MegaBaud™ operating mode, while maintaining RS-232compliant output levels.
GL3224规格书
Genesys Logic, Inc.
12F., No. 205, Sec. 3, Beixin Rd., Xindian Dist. 231, New Taipei City, Taiwan Tel : (886-2) 8913-1888 Fax : (886-2) 6629-6168 http ://
© 2015 Genesys Logic, Inc. - All rights reserved. GLI Confidential
Page 4
GL3224 Datasheet
List of Figures
Figure 3.1 – QFN48 Pinout Diagram ...................................................................................... 9 Figure 3.2 – QFN32 Pinout Diagram .................................................................................... 10 Figure 4.1 – QFN48 Functional Block Diagram .................................................................. 16 Figure 4.2 – QFN32 Functional Block Diagram .................................................................. 16 Figure 5.1 - Timing Diagram of Reset Width ...................................................................... 19 Figure 5.2 - Timing Diagram of Power Good to USB Command Receive Ready ............ 20 Figure 7.1 - QFN 48 Pin Package .......................................................................................... 23 Figure 7.2 - QFN 32 Pin Package .......................................................................................... 24
电力电子产品数据手册：XPSUS32AP Preventa模块CAT.4特点说明书
T h e i n f o r m a t i o n p r o v i d e d i n t h i s d o c u m e n t a t i o n c o n t a i n s g e n e r a l d e s c r i p t i o n s a n d /o r t e c h n i c a l c h a r a c t e r i s t i c s o f t h e p e r f o r m a n c e o f t h e p r o d u c t s c o n t a i n e d h e r e i n .T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n s .I t i s t h e d u t y o f a n y s u c h u s e r o r i n t e g r a t o r t o p e r f o r m t h e a p p r o p r i a t e a n d c o m p l e t e r i s k a n a l y s i s , e v a l u a t i o n a n d t e s t i n g o f t h e p r o d u c t s w i t h r e s p e c t t o t h e r e l e v a n t s p e c i f i c a p p l i c a t i o n o r u s e t h e r e o f .N e i t h e r S c h n e i d e r E l e c t r i c I n d u s t r i e s S A S n o r a n y o f i t s a f f i l i a t e s o r s u b s i d i a r i e s s h a l l b e r e s p o n s i b l e o r l i a b l e f o r m i s u s e o f t h e i n f o r m a t i o n c o n t a i n e d h e r e i n .Product data sheetCharacteristicsXPSUS32APPreventa module Cat.4 features 2*XPSUAF +enabling movement 48-240vac/dc screwMainRange of product Preventa Safety automation Product or component typePreventa safety module Safety module name XPSUSSafety module applicationFor electrical monitoring of two-hand control stations Monitoring antivalent contactsFor emergency stop, guard and light curtain monitoringFor enabling switch monitoringFunction of moduleEmergency stop button with 2 NC contacts Guard monitoring with 1 or 2 limit switches Monitoring 2 PNP sensors Magnetic switch monitoring Light curtain monitoring RFID switchMonitoring of electro-sensitive protection equipment (ESPE)Enabling switch monitoring Proximity sensor monitoringMonitoring two-hand control station Safety levelCan reach PL e/category 4 ISO 13849-1Can reach SILCL 3 IEC 62061Can reach SIL 3 IEC 61508Safety reliability dataMTTFd > 30 years ISO 13849-1Dcavg >= 99 % ISO 13849-1PFHd = 1.61E-09 ISO 13849-1HFT = 1 IEC 62061PFHd = 1.61E-09 IEC 62061SFF > 99% IEC 62061HFT = 1 IEC 61508-1PFHd = 1.61E-09 IEC 61508-1SFF > 99% IEC 61508-1Type = B IEC 61508-1Electrical circuit typeNC pair PNP pairAntivalent pair OSSD pairConnections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleRemovable screw terminal block, 0.25...2.5 mm²flexible with ferrule single conductorRemovable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductorRemovable screw terminal block, 2 x 0.25...1 mm²flexible with ferrule without cable end, with bezel Removable screw terminal block, 2 x 0.5...1.5 mm²flexible with ferrule with cable end, with bezel [Us] rated supply voltage48...240 V AC/DC - 10...10 %ComplementarySynchronisation time between inputs0.5 s 2 s 4 sType of startAutomatic/manual/monitored Power consumption in W 3 W 48 V DCPower consumption in VA 8.5 VA 240 V AC 50/60 Hz Input protection type Internal, electronic Safety outputs2 NOSafety inputs2Maximum wire resistance500 OhmInput compatibility Normally closed circuit ISO 14119XC limit switch ISO 14119Mechanical contact ISO 14119Normally closed circuit ISO 13850Antivalent pair ISO 14119OSSD pair IEC 61496-1-2Two-hand control EN 574/ISO 13851-III A3-wire proximity sensors PNPOutput type Relay output, 250 V ACRelay output, 250 V ACRelay output, 24 V DCRelay output, 24 V DC[Ie] rated operational current5 A AC-13 A AC-155 A DC-13 A DC-133 A AC-11 A AC-153 A DC-11 A DC-13Control outputs 3 pulsed outputInput/output type Semiconductor pulsed diagnostic output Z1, 20 mA [Ith] conventional free air thermal current8 AAssociated fuse rating10 A gG NO relay output circuit IEC 60947-1 Minimum output current10 mA relay outputMinimum output voltage12 V relay outputMaximum response time on input open20 ms[Ui] rated insulation voltage250 V 2)EN/IEC 60947-1[Uimp] rated impulse withstand voltage4 kV II EN/IEC 60947-1Local signalling Power ON LED green)Error LED red)Safety output status LED yellow)Start input LED yellow)Safety input S12 LED yellow)Safety input S13 LED yellow)Safety input S22 LED yellow)Safety input S23 LED yellow)Mounting support35 mm symmetrical DIN railMaximum Depth 4.72 in (120 mm)Maximum Height 3.94 in (100 mm)Maximum Width0.89 in (22.5 mm)Net Weight0.44 lb(US) (0.200 kg)EnvironmentStandards IEC 60947-5-1IEC 61508-1 functional safety standardIEC 61508-2 functional safety standardIEC 61508-3 functional safety standardIEC 61508-4 functional safety standardIEC 61508-5 functional safety standardIEC 61508-6 functional safety standardIEC 61508-7 functional safety standardISO 13849-1 functional safety standardIEC 62061 functional safety standardProduct certifications TÜVCULusIP degree of protection IP20 terminals)EN/IEC 60529IP40 housing)EN/IEC 60529IP54 mounting area)EN/IEC 60529Ambient air temperature for storage-13…185 °F (-25…85 °C)Relative humidity5…95 % non-condensingOrdering and shipping detailsNbr. of units in pkg.1Package weight(Lbs)10.02 oz (284 g)Packing UnitsUnit Type of Package 1PCEPackage 1 Height 2.56 in (6.5 cm)Package 1 width 5.43 in (13.8 cm)Package 1 Length 6.10 in (15.5 cm)Unit Type of Package 2BB1Number of Units in Package 21Package 2 Weight11.11 oz (315 g)Package 2 Height 2.52 in (6.4 cm)Package 2 width 5.24 in (13.3 cm)Package 2 Length 6.02 in (15.3 cm)Unit Type of Package 3S03Number of Units in Package 316Package 3 Weight11.95 lb(US) (5.42 kg)Package 3 Height11.81 in (30 cm)Package 3 width11.81 in (30 cm)Package 3 Length15.75 in (40 cm)Offer SustainabilitySustainable offer status Green Premium productEU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)EU RoHSDeclarationMercury free YesRoHS exemption information YesChina RoHS Regulation China RoHS DeclarationEnvironmental Disclosure Product Environmental ProfileCircularity Profile End Of Life InformationWEEE The product must be disposed on European Union markets following specificwaste collection and never end up in rubbish bins.PVC free YesDimensions DrawingsDimensionsFront and Side Views(A) :Product drawing(B) :Screw clamp terminal (C) :Side view(1) :Removable terminal blocks, top (2) :Removable terminal blocks, bottom (3) :LED indicators(4) :Start function selector (5) :Function selector(6) :Connector for optional output extension module (lateral)(7) :Sealable transparent coverMounting and Clearance Mounting to DIN railScrew-mountingConnections and SchemaWiring Drawing(1) :A1-A2 (Power supply)(2) :S11-S12-S13-S21-S22-S23 (Single-channel safety input)(3) :Y1-Y2 (Start)13-23-14-24 :OutputEXT :Connector for optional extension module B2 :Common ground terminalZ1 :Pulsed output for diagnostics, not safety-related。
地铁列车数字电视机顶盒维护手册-国标
地铁列车数字电视机顶盒（国标机顶盒）维护手册上海东方明珠广播电视研究发展有限公司目录一、数字电视接收系统组成： (3)二、数字电视接收系统原理图 (3)三、数字电视接收设备连线图 (4)四、数字机顶盒设备资料 (4)五、数字电视机顶盒前后面板图 (4)六、数字电视接收设备接口示意图 (5)七、机顶盒接收信号特性 (5)八、常见故障列表 (6)数字电视接收设备由鞭状天线、数字电视机顶盒及电源适配器组成。
鞭状天线接收空间信号后送入数字电视机顶盒，经过数字电视机顶盒处理后以模拟视频信号（AV端子）的形式传送至列车车载PIS系统。
二、数字电视接收系统原理图四、数字机顶盒设备资料五、数字电视机顶盒前后面板图图一：机顶盒正面照（无接线）图二：机顶盒背面照（接线面）六、数字电视接收设备接口示意图1. 数字电视机顶盒后面板接口示意图图三：顶盒后面板接口示意图注：1、机顶盒2路视频输出，音频有1组左右声道输出2. 电源适配器面板接口示意图图四：电源适配器面板接口示意图七、机顶盒特性1、当接收信号临界时，机顶盒输出的画面出现马赛克。
2、当接收信号微弱时，机顶盒会显示黑屏。
3、当无接收信号时，机顶盒出现东方明珠待机画面（绿色底纹）。
八、常见故障列表注1：排查以上故障现象的是在有地铁数字信号接收正常的情况下，并且已排除了PIS系统故障。
注2：简单区分PIS系统和数字机顶盒设备故障的方法：当车载LCD显示静止画面或待机画面时，可重启机顶盒电源。
如LCD画面有变化，则可确认PIS系统正常。
8742电子产品型号：三对22AWG实心铜线，PVC胶囊，PVC外壳，CMG技术规范说明书
PVC - Polyvinyl Chloride 0.032 in (0.81 mm) 0.242 in (6.15 mm)
Overall Cable Diameter (Nominal): 0.242 in (6.15 mm)
Electrical Characteristics
Electricals
Max. Pull Tension: Bulk Cable Weight:
46 lbs (21 kg) 30 lbs/1000ft (45 kg/km)
Standards and Compliance
Flammability / Reaction to Fire: CPR Compliance: NEC / UL Compliance: AWM Compliance:
Technical Specifications
Product Overview
Suitable Applications:
telephone cables; low voltage analog signals (4-20ma, 0-10v, ...); low voltage control (24v, …); voice communications
Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
ESB32452中文资料(Panasonic)中文数据手册「EasyDatasheet - 矽搜」
ESB32中等电流按钮开关
Type: ESB32(H=12.8 mm)
■ 特征
● 久游 ● 可以安装在一个印刷电路电路板.
■ 推荐应用
● 操作开关汽车（超速,危险
和地图灯开关等）
● 用于继电器,电磁检测功能
控制
按钮开关/ ESB32
■ 零件编号说明
■ 技术指标
0.1 A 12 Vdc至3用12 VDC（阻性负载） 锁定旅游：2.45毫米,全行程：4.5毫米 锁定旅游2.8毫米,全行程：4.5毫米
12.8 mm 2极1掷（N.O.型或N.C.型）
自锁,无锁 5.0 N±3.0 N, 3.5 N±1.5 N
50件.聚乙烯塑料袋（散装） 1000件.
芯片中文手册,看全文,戳
6.0
A
1.0±0.1
Details A 4.7
23.0 (From PWB)
Heigth 12.8 16.0
2.2
R1.6
9.5
0.4
1.8 3.5
10.7
Lever center
6.0
9.5
4–φ1.1
PWB mounting hole for reference Tolerance : ±0.05 (t=1.6 mm) View from terminal side
直码头
PP ESB32133 ESB32153 ESB32233 ESB32253 ESB32333 ESB32357 ESB32433 ESB32453
NL ESB32134 ESB32154 ESB32234 ESB32254 ESB32334 ESB32354 ESB32434 ESB32454
MAX3221ECUE+中文资料
元器件交易网
±15kV ESD-Protected, 1µA, 3.0V to 5.5V, 250kbps, RS-232 Transceivers with AutoShutdown MAX3221E/MAX3223E/MAX3243E
ABSOLUTE MAXIMUM RATINGS
†Covered by U.S. Patent numbers 4,636,930; 4,679,134; 4,777,577; 4,797,899; 4,809,152; 4,897,774; 4,999,761; 5,649,210; and other patents pending.
________________________________________________________________ Maxim Integrated Products
Pin Configurations appear at end of data sheet. Typical Operating Circuits appear at end of data sheet.
MAX3223E MAX3243E
AutoShutdown and UCSP are trademarks of Maxim Integrated Products, Inc.
20 Thin QFN-EP* -40°C to +85°C T2055-5 (5mm x 5mm)
* Exposed paddle. Ordering Information continued at end of data sheet.
Selector Guide
PART MAX3221E NO. OF DRIVERS/ RECEIVERS 1/1 2/2 3/5 VCC RANGE (V) +3.0 to +5.5 +3.0 to +5.5 +3.0 to +5.5 AutoShutdown ✔ ✔ ✔
ap8224芯片手册
ap8224芯片手册AP8224芯片手册一、AP8224芯片概述AP8224是一款高性能、低功耗的Wi-Fi芯片，由我国知名半导体制造商设计生产。
该芯片支持/g/n标准，适用于各种无线局域网应用，如智能家居、物联网、工业控制等领域。
二、AP8224芯片的功能特点1. 支持频段，兼容/g/n标准；2. 支持多种无线速率，最高可达600Mbps；3. 支持MIMO技术，提高无线传输性能；4. 支持多种安全认证协议，如WPA2、WPA3等；5. 支持多种网络模式，如Ad-hoc、Infrastructure等；6. 支持多种工作模式，如STA、AP、Router等；7. 支持低功耗模式，延长设备使用寿命。
三、AP8224芯片的技术参数1. 工作电压：；2. 工作频率：；3. 数据速率：600Mbps；4. 传输方式：无线；5. 接口类型：SDIO/SPI；6. 天线接口：SMA。
四、AP8224芯片的应用场景1. 智能家居：AP8224芯片可用于智能电视、智能冰箱、智能空调等家电设备中，实现无线连接和控制；2. 物联网：AP8224芯片可用于物联网设备中，实现设备间的无线通信和控制；3. 工业控制：AP8224芯片可用于工业控制设备中，实现设备的无线连接和控制。
五、AP8224芯片的使用方法与注意事项1. 使用前请先阅读芯片手册，了解芯片的基本功能和使用方法；2. 使用时应选择合适的天线，以保证信号传输效果；3. 使用时应避免干扰源的存在，如微波炉、电磁炉等；4. 使用时应定期检查设备的电源和天线是否正常；5. 使用时应遵循相关法律法规和安全规范。
艾茨霍斯 Power Defense 型号PDG24G0060E3ZN 电容器类电路保护器说明说明书
Eaton PDG24G0060E3ZNEaton Power Defense molded case circuit breaker, Globally Rated, Frame 2, Four Pole (100% N), 60A, 35kA/480V, PXR20 LSIG w/ ZSI and Relays, No TerminalsGeneral specificationsEaton Power Defense molded case circuit breakerPDG24G0060E3ZN 78667928835188.9 mm 152.4 mm 139.5 mm 2.46 kg Eaton Selling Policy 25-000, one (1) year from the date of installation of theProduct or eighteen (18) months from thedate of shipment of the Product,whichever occurs first.RoHS Compliant IEC 60947-2CSAUL 489CCC MarkedProduct NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCompliancesCertifications60 AComplete breaker 2Four-pole (100% N)PD2 Global Class APXR 20 LSIG600 Vac600 V100% neutral protection No Terminals35 kAIC at 480 Vac30 kAIC Icu/ 22.5 kAIC Ics/ 63 kAIC Icm @440V (IEC)10 kAIC Icu @125 Vdc10 kAIC Icu @250 Vdc8 kAIC Icu/ 4 kAIC Ics/ 16.8 kAIC Icm @690V (IEC)35 kAIC @480V (UL)18 kAIC @600V (UL/CSA)36 kAIC Icu/ 36 kAIC Ics/ 75.6 kAIC Icm @380-415V (IEC)55 kAIC Icu/ 55 kAIC Ics/ 121 kAIC Icm @240V (IEC)20 kAIC Icu/ 15/13 kAIC Ics/ 42 kAIC Icm @525V South Africa (IEC)25 kAIC Icu/ 20 kAIC Ics/ 52.5 kAIC Icm @480V Brazil (IEC) 65 kAIC @240V (UL)60 A Eaton Power Defense MCCB PDG24G0060E3ZN 3D drawingPower Xpert Protection Manager x32Power Xpert Protection Manager x64Consulting application guide - molded case circuit breakersPower Defense brochurePower Defense molded case circuit breaker selection posterPower Defense technical selling bookletPower Defense molded case circuit breakers - Frame 2 product aidPower Xpert Release trip units for Power Defense molded case circuit breakersMolded case circuit breakers catalogAmperage RatingCircuit breaker frame type FrameNumber of poles Circuit breaker type ClassTrip TypeVoltage rating Voltage rating - maxProtection TerminalsInterrupt rating Interrupt rating rangeTrip rating 3D CAD drawing package Application notesBrochuresCatalogsCertification reportsEU Declaration of Conformity - Power Defense molded case circuit breakersPDG4 CB reportPDG4 CCC certificationPDG2 CB reportInstallation instructionsPower Defense Frame 2 tunnel terminal (aluminum), 150A, 4 pole instructions - IL012238EN H04Power Defense Frame 2 screw terminal_end cap kit, 225A, 3 pole instructions - IL012258EN H01Power Defense Frame 2 box terminal (aluminum), 225A, 4 pole instructions - IL012235EN H04Power Defense Frame 2 clamp terminal (steel), 20A, 4 pole instructions - IL012246EN H04Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA150RF instructions - IL012244EN H01Power Defense Frame 2 global terminal shield, 4 pole - IL012330EN Power Defense Frame 2 box terminal (steel), 100A, 4 pole instructions - IL012234EN H04Power Defense Frame 2 PDG2 and PDC(E)9 breaker instructions -IL012106ENPower Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2256W instructions - IL012242EN H01Power Defense Frame 2 bell alarm switch instructions - IL012154EN Power Defense Frame 2 Bell Alarm Switch Instructions (IL012154EN).pdf Power Defense Frame 2 shunt trip UVR instructions - IL012130EN Power Defense Frame 2/3/4/5/6 voltage neutral sensor module wiring instructions – IL012316ENPower Defense Frame 2 tunnel terminal (aluminum), 100A, 4 pole instructions - IL012237EN H04Power Defense Frame 1-2-3-4 IP door barrier assembly instructions -IL012278ENPower Defense Frame 1 IEC and Frame 2 Rotary Mechanism with NFPA Handle Attachment Instructions (IL012260EN).pdfPower Defense Frame 2 locking devices and handle block instructions - IL012149ENPower Defense Frame 2 tunnel terminal (aluminum), 50A, 4 pole instructions - IL012236EN H04Power Defense Frame 2 multi wire connector kit -PDG2X3(2)(4)TA2253W instructions - IL012243EN H01Power Defense Frame 2 tunnel terminal kits - PDG2X1TA225Kinstructions- IL012239EN H01Power Defense Frame 2 terminal kit - PDG2X3(2)(4)TA225RF instructions - IL012245EN H01Installation videosPower Defense Frame 2 Bell Alarm with PXR Animated Instructions.pdf.rh Power Defense Frame 2 withTMTU, Shunt Trip_UVR Animated Instructions.rhPower Defense Frame 2 TMTU Aux, Alarm, ST and UVR Animated Instructions.rhMultimediaPower Defense Frame 3 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 2 Aux, Alarm, Shunt Trip, and UVR How-To Video Power Defense Frame 2 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense Frame 2 Direct Rotary Handle Mechanism Installation How-To VideoEaton Power Defense for superior arc flash safetyPower Defense Frame 6 Trip Unit How-To VideoPower Defense molded case circuit breakersPower Defense Frame 5 Trip Unit How-To VideoPower Defense BreakersSpecifications and datasheetsEaton Specification Sheet - PDG24G0060E3ZNTime/current curvesPower Defense time current curve Frame 2 - PD2White papersIntelligent power starts with accurate, actionable dataIntelligent circuit protection yields space savingsMolded case and low-voltage power circuit breaker healthSingle and double break MCCB performance revisitedMaking a better machineMolded case and low-voltage breaker healthSafer by design: arc energy reduction techniquesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
Eaton HJD3200 Series C完整塑料箱电路保护器说明说明书
Eaton HJD3200Eaton Series C complete molded case circuit breaker, J-frame, HJD, Fixed thermal, Fixed magnetic trip, Three-pole, 200 A, 600 Vac, 250 Vdc, 100 kAIC at 240 Vac, 65 kAIC at 480 Vac, Aluminum, Line and load, 50/60 HzGeneral specificationsEaton Series C complete molded case circuit breakerHJD32007866794118414.06 in 4.13 in 4.13 in 12.5 lb Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.UL Listed Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCertifications65 kAIC at 480 Vac100 kAIC at 240 VacJ200 AThree-poleSeries CComplete breakerHJD50 to 60 HzComplete breakerLine and load600 Vac, 250 Vdc AluminumFixed thermal, fixed magnetic UL listed 100%-rated molded case circuit breakersApplication of Multi-Wire Terminals for Molded Case Circuit Breakers Application of Tap Rules to Molded Case Breaker TerminalsCircuit breaker motor operators product aidMulti-wire lugs product aidCurrent limiting Series C molded case circuit breakers product aidPlug-in adapters for molded case circuit breakers product aidMOEM MCCB Product Selection GuidePower metering and monitoring with Modbus RTU product aidMotor protection circuit breakers product aidStrandAble terminals product aidBreaker service centersMolded case circuit breakers catalogEaton's Volume 4—Circuit ProtectionHJD3 2D PDFHJD3 2D Drawing XchangeHJD3 3D InventorHJD3 3D Model XchangeJ-frame Molded Case Circuit Breaker DrawingCircuit Breakers ExplainedCircuit breakers explainedMOEM MCCB product selection guideSeries C G-Frame molded case circuit breakers time current curves Series C, J-frame Time Current CurveSeries C F-Frame molded case circuit breakersEaton Specification Sheet - HJD3200Series C J-Frame molded case circuit breakers time current curvesCutler-Hammer Series C Time-Current Curves for J-Frame Circuit BreakersInterrupt ratingFrameAmperage Rating Number of polesSeriesTypeCircuit breaker type Frequency ratingCircuit breaker frame type TerminalsVoltage ratingTerminal materialTrip Type Application notesBrochuresCatalogsDrawingsMultimediaSpecifications and datasheets Time/current curvesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
爱立信HKD3225系列完整铣型电路保护器说明说明书
Eaton HKD3225Eaton Series C complete molded case circuit breaker, K-frame, HKD, Fixed thermal, Fixed magnetic trip, Three-pole, 225 A, 600 Vac, 250 Vdc, 100 kAIC at 240 Vac, 65 kAIC at 480 Vac, Aluminum, Line and load, 50/60 HzGeneral specificationsEaton Series C complete molded case circuit breakerHKD32257866790095984.1 in5.5 in5.5 in 11.5 lb Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.UL Listed Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCertificationsSeries C65 kAIC at 480 Vac100 kAIC at 240 VacKHKD50 to 60 HzComplete breakerLine and load600 Vac, 250 Vdc Aluminum225 AFixed thermal, fixed magnetic Three-pole Application of Tap Rules to Molded Case Breaker TerminalsUL listed 100%-rated molded case circuit breakersApplication of Multi-Wire Terminals for Molded Case Circuit BreakersPower metering and monitoring with Modbus RTU product aid Circuit breaker motor operators product aidMOEM MCCB Product Selection GuidePlug-in adapters for molded case circuit breakers product aid StrandAble terminals product aidCurrent limiting Series C molded case circuit breakers product aid Multi-wire lugs product aidMotor protection circuit breakers product aid310+ MCCB product family pocket folderK-Frame 310+ Molded-case circuit breakersBreaker service centersEaton's Volume 4—Circuit ProtectionMolded case circuit breakers catalogHKD3 AutoCAD 2D Footprint (mm)HKD3 AutoCAD 2D FootprintHKD3 3D InventorHKD3 2D Drawing XchangeHKD3 3D Model XchangeHKD3 2D PDFInstruction Leaflet for the KES 310+ Electronic Trip Unit Installation Instructions for DK, KDB, KD, HKD, KDC, KW, HKW, KWC, CKD, CHKD Circuit Breakers and Molded Case SwitchesCircuit Breakers ExplainedCircuit breakers explainedSeries C J-Frame molded case circuit breakers time current curves Series C F-Frame molded case circuit breakersSeriesInterrupt ratingFrameCircuit breaker type Frequency ratingCircuit breaker frame type TerminalsVoltage ratingTerminal material Amperage RatingTrip TypeNumber of poles Application notesBrochuresCatalogsDrawingsInstallation instructions MultimediaSpecifications and datasheetsEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmediaEaton Specification Sheet - HKD3225Series C G-Frame molded case circuit breakers time current curves MOEM MCCB product selection guideF-Frame 310+ Molded-case circuit breakers 15-225A。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Recommended Soldering Pattern (Units : mm)
Tape Specifications O:DSAD1103 APPROVED : J. Lu
REV NO: V.1 CHECKED :Allen Liu
DATE:MAR/19/2003 DRAWN:Y.H.LI
Hi gh Effi ci ency Red Super Bri ght Green Hi gh Effi ci ency Red Super Bri ght Green All
Hi gh Effi ci ency Red Super Bri ght Green
625 568 15 15
Hi gh Effi ci ency Red Super Bri ght Green
Absolute Maximum Ratings at TA=25°C °
Sy m b o l λp e a k λD ∆λ1/2 C VF IR P ar am et er Peak Wavelength D omi nate Wavelength Spectral Li ne Half-wi dth C apaci tance Forward Voltage Reverse C urrent Hi gh Effi ci ency Red Super Bri ght Green D ev i c e Ty p . 627 565 45 30 Max . Un its nm nm nm pF V uA Tes t C o n d i t i o n s IF = 2 0 m A IF = 2 0 m A IF = 2 0 m A V F = 0 V;f= 1 M Hz IF = 2 0 m A VR = 5V
SPEC NO:DSAD1103 APPROVED : J. Lu
REV NO: V.1 CHECKED :Allen Liu
DATE:MAR/19/2003 DRAWN:Y.H.LI
PAGE: 1 OF 4
元器件交易网
Selection Guide
P ar t N o . APBD 3224ESGC Dic e HIGH EFFIC IENC Y RED (GaAsP/GaP) L en s Ty p e WATER C LEAR
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice.
PAGE: 4 OF 4
COLORS AND LENS TYPES AVAILABLE. : 1500PCS / REEL.
The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode.
Mi n . 10 18
Iv (m c d ) @ 20 m A
Ty p . 40 60
V i ew i n g An g le 2θ1/2 20°
SUPER BRIGHT GREEN (GaP)
Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
DATE:MAR/19/2003 DRAWN:Y.H.LI
PAGE: 2 OF 4
元器件交易网
High Efficiency Red / Super Bright Green
APBD3224ESGC
SPEC NO:DSAD1103 APPROVED : J. Lu
REV NO: V.1 CHECKED :Allen Liu
元器件交易网
3.2x2.4mm SMD CHIP LED LAMP
APBD3224ESGC HIGH EFFICIENCY RED
SUPER BRIGHT GREEN
l3.2x2.4mm SMT LED, 2.4mm THICKNESS. lLOW POWER CONSUMPTION. l VARIOUS lIDEAL FOR BACKLIGHT AND INDICATOR. l PACKAGE
Features
Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
2.0 2.2
2.5 2.5 10
Absolute Maximum Ratings at TA=25°C °
P ar am et er D C Forward C urrent Power di ssi pati on H i g h E f f i c i en c y R ed 105 160 5 -40°C To +85°C 30 Su p er B r i g h t Gr een 105 140 5 25 Un its mW mA V mA
DATE:MAR/19/2003 DRAWN:Y.H.LI
PAGE: 3 OF 4
元器件交易网
APBD3224ESGC SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process.
Reverse Voltage
Peak Forward C urrent [1]
Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Operati ng/Storage Temperature
SPEC NO:DSAD1103 APPROVED : J. Lu
REV NO: V.1 CHECKED :Allen Liu