AME270461X-CH中文资料

合集下载

Lake Processor LM 26 设备说明说明书

Features▸Configurable Lake ® Processor▸Mesa Mode (System EQ Processor 4-in / 4-out) ▸ C ontour Mode (Loudspeaker Processor 2-in / 6-out) ▸Raised Cosine Equalization ™▸Linear phase and classic crossovers ▸LimiterMax ™ peak and RMS limiters ▸Maximum available delay of 2 seconds ▸Audio Inputs and Outputs▸Analog with Iso-Float ™ ground isolation ▸Digital AES3 4-in / 8-out▸Gigabit dual redundant Dante ™ by Audinate ® audio networking▸Full control via Lake Controller software application ▸Software configurable GPIO ▸Front Panel▸Daylight-readable display▸Dedicated module input and output LED metering ▸Dedicated module input and output mute buttons with LED ▸Dynamic buttons and rotary encoder for parameter adjustment ▸Performance▸High quality A/D and D/A 24-bit conversion ▸96 kHz internal sampling frequency ▸32-bit floating point internal data pathTechnology OverviewThe LM 26 is a full-featured, 2-in / 6-out or 4-in / 4-out stand-alone digital audio loudspeaker processor. Based on the highly acclaimed Lake Processing technology, it provides seamless compatibility withLab.gruppen’s PLM ™ Series Powered Loudspeaker Management ™systems as well as LM Series and the MY8-LAK E. The LM 26’s easily programmable EQ and delay capabilities allow quick reconfiguration for use as processor and line driver for self-powered loudspeaker applications as well as for systems using separate power amplifiers.In step with the flexible Lake Processing technology implemented in the PLM Series, the LM 26 accepts audio signals as analog, AES3 digital, or via Audinate’s advanced Dante digital audio network at 48 kHz and 96 kHz sampling rates. Automatic input priority switching may be enabled, and the unit can function as both an input matrix mixer and Dante break-in and break-out box.Exclusive Lake Processing features incorporated in the LM 26 include Raised Cosine Equalization; linear phase and classic crossovers; and LimiterMax peak and RMS limiters. The Super Module capability allows flexible grouping of processor channels across separate hardware frames, including prior Lake products and PLM Series units. All functions are controlled via wired or wireless networking by the Windows ®-based Lake Controller software application. A universal power supply with detachable locking mains cable allows worldwide use.The LM 26 can be controlled or monitored via a 9-pin General Purpose Input Output (GPIO) connection. External devices such as alarm systems can trigger mute, power control or preset recall functions; status and fault conditions can also be reported externally.GPIO configuration is available via the front panel or Lake Controller.LM 26: Digital Audio Loudspeaker ProcessorModule I/O Levels and Dedicated Mute Buttons:This section is dedicated to the Module input and output signals. The inputs and outputs are separated by a white marker, depending on Mesa or Contour mode being used. The meter segments for each channel indicate clipping (red); -2 dB (yellow); and -6, -12,-60 dB (green). The dedicated MUTE button is either RED (muted),Intuitive Parameter Adjustment:Parameters are adjustable using six dynamic function buttons and a rotary encoder. A user-editable parameter is identified with an illuminated button or encoder, providing intuitive navigation and control. Parameters can be adjusted in small increments and simultaneousmultiple-parameter adjustment is also available.Powerful Matrix Router:The LM 26 provides a powerful output routing matrix via the front panel. This matrix, similar to the Lake Controller, allows any input or module output to be routed to the analog or digital outputs. This allows easy configuration of I/O routing, without the need for a connected PC - convenient and practical.Display Meter View:The default view of the daylight readable display provides Module I/O gain and limiter gain reduction meters along with associated frame, module and channel labels; an alternate I/O Status View provides a summary of input configuration, digital clock status and input level metering. A dedicated LED indicates various faults or warnings.Lake Controller Software:The Lake Controller and associated applications, including Firmware Update and Preset Manager Utilities, form a powerful suite of software enabling detailed control and management of Lake Processor networks. The Lake Controller enables adjustment of all LM 26 parameters, including gain, delay, limiters, EQ, crossovers and all I/O configuration and routing.Installed on a wireless touch-screen Tablet PC, the Lake Controller can be used to group processors together for simultaneous control from any location in the venue. The Lake Controller provides a real-time integration with Smaart 7 and Live Capture Light/Pro, providing direct audio analysis and measurement feedback within the Lake Controller.One Lake Controller for all Lake products:LM Series, PLM Series devices, and the Yamaha MY8-LAKE. New Lake Controller functionality provides LM Series-specific routing features, GPIO configuration and combined PLM and LM Series global powercontrol and event log.Input Routers 1-4WITH INPUT MUTESInput Routers 5-8NO MUTESO u t p u t R o u t i n gInput Mixer AInput Mixer BEQEQDelayC r o s s o v e r sLimiterMaxRMS/PeakGain / Delay Polarity / MuteGainPolarity / MuteEQ DelayGainPolarity / MuteEQLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQLimiterMaxRMS/PeakGain / Delay Polarity / MuteO u t p u t R o u t i n gInput Routers 1-8WITH INPUT MUTESInput Mixer AEQ Gain Delay HPF/LPFLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQ Gain Delay HPF/LPFLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQ Gain Delay HPF/LPFLimiterMaxRMS/PeakGain / Delay Polarity / MuteEQ Gain Delay HPF/LPFLimiterMaxRMS/PeakGain / Delay Polarity / MuteInput Mixer BInput Mixer CInput Mixer DLM 26: Loudspeaker or system processorThe LM 26 provides all the popular features found in legacy Lake Processors, including Mesa EQ filters, Linear Phase crossovers, AES3 connectivity, analog I/O with Iso-Float and Dante digital audio. In addition, this flagship Lake Processor range includes dual redundant Dante networking, GPIO connectivity, and new routing capabilities with dedicated pass-thru input routers to provide true Dante break-in and fail-over functionality.The processor can be configured to operate in Contour mode (loudspeaker crossovers) or in Mesa mode (4-channel system processor). A total of six input routers can be independently configured with up to four input fail-over priority settings and the output of any of these six input routers can also be patched directly to any analog, AES3 or Dante output without using any of the valuable module processing channels.Signal Flow for Lake LM 26 in Contour Mode:Signal Flow for Lake LM 26 in Mesa Mode:Item no. TDS-LM26_V10Lake is a wholly-owned subsidiary of Lab.gruppen AB, SwedenLake is a registered trademark of Lab.gruppen AB. PLM and Powered Loudspeaker Management are trademarks of Lab.gruppen AB. Dolby is a registered trademark of Dolby Laboratories. Raised Cosine Equalization, LimiterMax, Iso-Float, LAKE Mesa Quad EQ and LAKEContour PRO 26 are trademarks of Dolby Laboratories. Audinate is a registered trademark of Audinate Ltd. Dante is a trademark of Audinate Pty Ltd. All other trademarks are the property of their respective own e r s.w w w.l a K E P R O C E S S I N G.C O mLM 26: SpecificationsLake features Module conﬁ guration 2 Contour Modules or 4 Mesa Modules Processing channels 6 in Contour mode, 4 in Mesa modeInput routers8 input routers with 4 priorities in each, seamless failover to lower prioritiesModule input mixer 4 ch. for Contour, 8 ch. for Mesa-modules. Mix any ratio between all input routers. Input processing Raised Cosine Mesa and Ideal Graphic input equalizersOutput processing Linear phase or Classic crossovers, Parametric EQ, shelving and all-pass filters Features Delay, mute, phase, gain etc.LimitersLimiterMax with Peak and RMS limiter. Configurable MaxRMSLevel, MaxRMSCorner, MaxRMSAttack,SuperModule compatible YesAudio performance Conversion resolution 24 bit Internal sample rate 96 kHzInternal data path32 bit floating pointProduct propagation delay Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via module) 0.871 ms Analog (Analog in to Analog out via module) 1.039 msPass thru (Analog in to AES synchronous 96 kHz bypassing module) 0.158 ms Maximum available user delay2 secondsAnalogInputs and Outputs2 inputs, 6 outputsFrequency Response, analog-to-digital +/-0.1 dB, 20 Hz to 20 kHz Frequency Response, digital-to-analog +/-0.03 dB, 20 Hz to 20 kHz THD+Noise, Inputs 0.00024% at 1 kHz THD+Noise, Outputs 0.00037% at 1 kHz Dynamic Range, Inputs 116 dB Dynamic Range, Outputs 115 dBInput impedance 20 kOhm balanced, 10 kOhm unbalanced Output impedance 50 ohm Maximum input level+26 dBuInput Sensitivity - settings for digital full-scale 12 or 26 dBu Maximum Output level 21 dBuCrosstalk, inputs -98 dB, 20 Hz to 20 kHz Crosstalk, outputs-98 dB, 20 Hz to 20 kHz Common Mode Rejection Ratio (CMRR)>70 dB, 20 Hz to 20 kHzAES3/EBU (sample rate converters available as desired)Inputs and Outputs4 inputs, 8 outputsSupported sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz Supported resolutions Up to 24 bitTHD+Noise 0.00002 % at 96 kHz and 0.00006 % at 44.1 kHz sample rate Dynamic rangeBase48 -140 dBFS, Base44 -125 dBFSClockingClock selectionManual or automatic according to priority schemeOscillator type / synchronization High quality VCXO clock can provide Dante master clock or slave. Automatic synchronization with Dante network. Base48 2 (Primary and SRC)Base441 (SRC)Clock accuracy< ± 7 ppmDante (audio network)Inputs and Outputs4 inputs, 8 outputs Supported sample rates 48, 96 kHz Support redundant paths YesDevice latency0.25 ms, 0.5 ms, 1.0 ms, 2.0 ms, 5 msGPIO Inputs 2 General Purpose Inputs (GPI) supporting external contact closure Outputs2 General Purpose Outputs (GPO) with internal contact closure Software conﬁ gurable input control Standby state, Mute state, Dual Preset recall Software conﬁ gurable output indication Standby state, Mute state, Faults, ReadyDevice presets Frame presets 100Power requirements Nominal voltage 100-240 VAC Operating voltage 70-265 VAC Power consumption 30 W maximumFront panel interface Display Daylight readable monochrome (128 x 64)MetersLED for signal level and clip indicators per channelMute access Dedicated Mute button and LED indication per processing channel MenuIntuitive and powerful user interface with soft keysStatus indicationLED Fault and Warning indication and detailed description on display Parameter adjustmentSingle/multiple parameter edits with rotary encoderBack Panel Interface Analog Inputs and Outputs 2 + 6 XLRAES Inputs and Outputs DB-25, with selectable terminationEthernet Auto 100/1000, Auto uplink, 2 x Neutrik etherCON RJ45 connectors GPIO DB-9PowerDetachable locking 3-pin IECControl and monitoring interface Via Ethernet for Lake Controller software, or DLM (the 3rd party protocol)Dimensions (W/H/D)483 mm (19"), 44 mm (1 U), 290 mm (11.5")Weight 5 kg (11 lbs)Finish Black painted steel chassis with cast alumimum handlesApprovals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCCWarranty3 years, components and factory workmanship; see full warranty statementSpecifications subject to change without noticeSpecifications LM 26。

aama2604中文

美国建筑制造商协会铝制品挤压和轧板的高效有机喷粉的自愿说明书，性能要求和测试步骤AAMA 2604-02目录封面 (1)1.0范畴 (2)2.0用途 (2)3.0说明 (2)4.0概况 (2)5.0样品测试 (3)6.0金属准备和预处理 (3)7.0测试 (3)8.0测试报告 (6)9.0参照标准 (7)门窗幕墙行业的执行标准，产品确认和教育项目的起源作为一项公共服务，美国建筑制造者协会的代表们写出这份自愿说明书，旨在作为信息咨询和刊物出版。

于此，美国建筑制造者协会拒绝了所有对出版材料有使用，申请和改编的想法。

2002美国建筑制造商协会1827瓦尔登湖办事处广场，550房，绍姆堡，60173IL电话：847/303-5664 传真：847/303-5447电子邮箱：*********************网址：所有美国建筑制造者协会的文件资料都需发表在我们的网站“出版收藏”中序言多年来，在建筑铝挤压和轧板上，建筑界已经把AAMA603和AAMA605认作有机喷涂的测试和性能标准。

在技术方面我们取得了重大进展，而这些进步使更改这个标准成为必要。

AAMA 2603：对铝制品挤压和轧板的高效有机喷粉自愿说明书，性能要求和测试步骤。

AAMA 2604：对铝制品挤压和轧板的高效有机喷粉自愿说明书，性能要求和测试步骤。

AAMA 2605：对铝制品挤压和轧板的高效有机喷粉自愿说明书，性能要求和测试步骤。

SuperceedAAMA 603：“用涂浆的方式在挤压铝上着粉的相关性能要求和测试步骤”和AAMA 605：“建筑铝挤压和轧板的高效有机喷粉说明”，也做了文件资料的更改AAMA 2604是一个新的五年高效操作说明书，和原来的版本AAMA605.2-92操作标准有相似之处（原来的版本不包括任何后来的附录），不包括前处理部分（非铬化前处理部分除外）。

1.0范畴1.1这份说明书描述了对高性能有机喷粉在建筑用铝制品挤压和轧板应用的测试程序和操作要求。

迈洛特克2702和3702记录器产品说明书

1981FEATURES AND SPECIFICATIONSMOLYTEK 2702 AND 3702 RECORDERS27023702REV: 03302004Standard Specifications for Model 2702 and 3702INPUTSNUMBER OF INPUTSUp to 32 analog inputs plus the computer I/O described in "computer interface" section on Page 4.TYPES OF INPUTSAny combination of any of the following types of analog inputs can be selected by the operator:Millivolts and Volts: Any full-scale voltage from +/-1 millivolt to 10 volts can be programmed.Current: 4 to 20 mA or other current ranges such as 1 to 5 mA or 10 to 50 mA can be accommodated by simply installing a resistor across the input terminals.Thermocouples: Linearization to 0.2°C conformity with NBS reference monographs plus automatic cold junction compensation are provided for thermocouple types J, K, T, R, S, E, B, N, Plaintell II, W/W-26Re. In addition, linearization for special thermocouples such as Xk, XA, EU-2, LB-3 etc. can be entered by the operator. Cold junction temperature is continuously monitored and automatically compensated for in all TIC measurements, but can be disabled for specific channels when not required.Resistance Temperature Detectors (RTDs): Linearization is provided for Pt-1 00, both DIN 43760 (IEC 200385) and Alpha .003923; 120 ohm Nickel, Edison Electric Institute 120 ohm at 0°C; 10 ohm Copper, Edison Electric Institute 10 ohm at 0°C; 10 ohm Copper at 25°C. Any curve, such as PT -50 or JIS 2003916, can be entered by the operator.Relative Humidity: Relative humidity is calculated using dry and wet bulb temperatures as variables in a standard Rh algorithm.User Programmed Linearization: Room for 16 different customer entered linearizations for applications such as special TICs, RTDs, thermistors, humidity sensors, gas analyzers, load cells, flow meters, etc.This linearization may be entered as a look-up table with up to 40 break points, or with a slope/intercept using the equation y = Mx + b.T/C STANDARDIZATIONOne step software routine references up to 31 thermocouples of the same type to within +/-0.15°C. This routine will solve thermocouple reading inaccuracies due to unmatched T/Cs of the same type, different sensor lead lengths, or temperature gradients across the input terminals.SCAN CYCLE TIMEAll input signals and 2 alarm set points per channel are scanned every 2 seconds regardless of chart speeds or datalog intervals.ENGINEERING UNITSAny three character engineering unit can be created and assigned to correspond with any scaling factor on any channel. Units such as GPM, T/D, RPM, MIL, TON, KG, etc. can be assigned to channels. These units will be included in the computer output, digital display and printed on the chart when datalogging.SCIENTIFIC NOTATIONInput values exceeding five digits can be expressed in scientific notation on the chart, digital displaysand serial output. For example, 0.000061 TOR would be represented as 6.1 X 10-5.PROGRAMMABLE RESOLUTIONFor datalog, serial ASCII and digital displays; one or five places to the right of the decimal may be selected.Page 1 of 8ALARM OPERATIONALARM SET POINTSEach channel includes 2 set points that can be used to indicate high/low, high/higher, low/lower or rate of change alarms. Set points can be programmed along any range in any engineering units.ALARM TREND PRINTINGWhen any channel exceeds an alarm set point, the date and time are printed on the chart and brackets (< >) will appear around the ID number of the channel involved until the alarm condition ends. The date and time will also be printed when the alarm ends.ALARM DATALOGGINGOne normal and one fast rate can be programmed for datalog printing with the faster interval occurring during alarm conditions. An H for high alarm or an L for low alarm will follow the channel ID number of the channels in alarm.ALARM CHART SPEEDThe operator may select a slow chart speed for normal operating conditions and a second, faster speed for alarm conditions. The faster chart speed will automatically engage whenever one or more channels exceed a high or low alarm setting. The date and time will be printed when the recorder switches to alarm speed and when the alarm condition has cleared. The unit will return to the normal speed when the alarm has cleared.RATE OF CHANGE ALARMThe rate at which any input changes over a programmable period of time can be displayed on any channel. As with every other channel, this channel will have two programmable set points.ALARM BUZZERA built in alarm buzzer will beep every 2 seconds as long as any alarm condition continues or until silenced from the keyboard.ALARM SCAN FREQUENCYAll 64 alarm set points (2 per channel) are automatically scanned every 2 seconds.ALARM MESSAGES12 messages of 16 characters each can be composed and assigned to specific set points. A message can then be printed whenever its assigned set point is activated. These messages may contain instructions for the operator such as "CHECK COOLANT" or "CALL EXT. 9030" or the message may identify the nature of the alarm, such as "HI TEMP OVEN #3."ALARM RELAYS (OPTIONAL)The recorder is available with optional 12, 24, or 32 alarm relays. Relays are S.P.D. T. and can be assigned to any individual or group of set points using And/Or logic. Contacts can be programmed for N.O. or N.C. operation and are rated at 5.0A @ 24 VDC or 120 V AC for resistive loads; 0.1 A @ 120 VAC for inductive loads.AUTOMATIC/MANUAL PHONE DIALINGAny telephone number plus area and access codes (up to 18 digits) can be stored for automatic dialing and communication with a remote location via modem connection any time a channel goes into alarm (telephone modems are required). After a connection is made, data will be transmitted for 30 minutes or for the duration of the alarm before automatic disconnect.Page 2 of 8COMPUTER INTERFACEA complete two-way RS-232 and 20 mA current loop interface is standard in every 2702. The output is programmable and can contain date and time as well as alarm status, measured variable and engineering units. Data transmission can include all channels, selected channels or only channels in alarm. Data can be transmitted to a connected computer, printer, terminal or data storage device at any interval from continuous to once every 7 days (168 hours). A connected computer can also query instruments for data on demand in channel by channel or in binary block formats for use in computer or PLC controlled data acquisition applications. Parity and stop bits are programmable and 15 baud rates can be selected from 50 through 19.2K.SERIAL OUTPUT ON ALARMEach channel can be programmed to appear in the computer output: 1) continuously, 2) never; 3) only when that particular channel is in an alarm condition.TAGLINES IN COMPUTER OUTPUTInstruments can be programmed to include or exclude 6 character taglines for channel identification in the serial output. MATH CALCULATIONSFLOATING POINT ARITHMETICFloating point addition, subtraction, multiplication and division between any two channels can be displayed on athird (virtual) channel. This virtual channel can itself be a part of any calculation.DOUBLE INTERPOLATIONData values on real and virtual channels can be manipulated by feeding them through multiple linearization tables and/or math routines. This feature allows channels to accept the conditioned value of another input channel as a direct input.SQUARE ROOTThe square root of any input can be extracted and displayed. The unit can trend, log and/or transmit up to 32 square root extractions.TIME AVERAGINGThe averages of up to 8 different inputs over a programmed time interval from 24 minutes to 254 hours can be calculated with an automatic reset after the selected interval.GROUP AVERAGINGThe average of any group of 2 to 31 channels can be calculated and displayed as a separate channel. Two or more group averages can be determined simultaneously.INTEGRATIONSamples of any input taken once per second are added and displayed until the programmed reset value has been reached. Operator may select a threshold level for exclusion of lesser input values.RATE OF CHANGEMonitors, records and transmits the rate of change of an input over a specified time period from 1 min. to 254 hours.MASS FLOWMass flow is calculated using the algorithm shown below and displayed as a separate input.FOCalculates the lethality factor of a temperature input monitoring a steam sterilization process. Internally calculates the total equivalent time at a base temperature derived from the actual real time temperature.Page 3 of 8PRINTINGTREND PRINTINGThe unit plots a data point (representing the input value) for each active channel with every excursion of the print head over the chart. The continuous series of these points forms a trend line. A channel ID number or three-character tag will appear to the right of the trend lines.DATALOGGINGInput signal data including engineering units and alarm status for all active channels plus date and time will be printed in a column format. The unit prints data in five columns (3 columns if tags are printed).The frequency of printing is adjustable from once every 12 seconds to once every 5000 minutes.TREND RECORDING AND DATALOGGINGAny combination of channels can be trend recorded, datalogged or both with individual control over each channel. Printing can also be set up for automatic interruption of trend recording with a datalog print of all input signals and then a return to trend recording. Switch from trend recording to datalog can be programmed to occur from once every minute to once every 168 hours and/or whenever an alarm occurs on any channel.ALARM TREND RECORDING AND DATALOGGINGAs an alternative to continuous recording or logging each channel can be programmed to appear in the trend or datalog printing only when it is in alarm. For example, channels 1 to 15 may be programmed for continuous recording, with channels 16, 18 and 20 to be printed on the chart only when they exceed their alarm set points.PROGRAMMABLE PRINT DARKNESSOne of four keyboard settings can be selected for optimum print contrast.DOT FILLINGThe dot filling feature produces a continuous trend line even if an input signal changes 100% of full scale in a few seconds.MINIMUM / MAXIMUMA digital print-out of min. and max. input values for each active channel over a programmable time period can be selected with automatic reset after print.REPORT GENERATIONA single keystroke activates a printout of real time plus min/max values with units of measure for all channels programmed for datalog printing.MESSAGE PRINTINGMessages typed on the keyboard can be printed on the chart or sent to a peripheral computer, terminal or printer via the serial port. Single line message length can be up to 109 characters. Computer generated messages received via the ASCII port can also be printed on the chart.CHART SCALE PRINTINGA user designed measurement scale can be stored for printing at regular intervals. Scale can be made up of any numbers, symbols and/or characters.DATE/TIME REFERENCEThe day, month, year, hour, minute and second are printed on the chart at user programmed intervals while trending or at the beginning of each datalog print interval. The data and time print also occurs automatically at the onset and clearing of an alarm condition.CHART SPEEDSKeyboard selectable from 0.01 "/hour to 120"/hour or 0.02 cm/hour to 300 cm/hour in 0.01 increments.PRINT CYCLE TIME32 channels can be printed in less than six seconds. Channel ID or tag, chart scale, date and time are printed at all chart speeds.AUTO CHART DRIVE SHUT-OFFA paper counter will monitor the length of chart paper on the feed roll and automatically switch the chart drive to standby if the supply drops below 5 ft. The alarm buzzer will sound and a message will be shown on the digital displays indicating that replacement is necessary.Page 4 of 8FEATURES AND RELIABILITYACCURACYBetter than 0.1% of the amplifier full scale ranges for +/-1 0 mV, +/-100 mV, +/-1 V, + 10 V ranges; better than 0.5% for +/-1 mV. These accuracy figures are based on a percentage of the amplifier full scale, not on a percentage of the trend record display.WARRANTYFull 2 year warranty, parts and labor; F.O.B. factory.AUTOMATIC RESTARTIf power failure occurs, unit automatically resumes operation and computer communication when power is restored.SURGE WITHSTANDCertified for surge withstand capability to IEEE standard 472-1974.AUTOMATIC CALIBRATIONA built-in precision reference source automatically checks both zero and span (full scale) every 2 seconds and makes adjustments if needed.SEISMIC QUALIFIED2702 passed OBE and SSE tests.SECURITYA three-digit security code can be programmed to prevent any unauthorized entries from being made in program routines.MEMORY PROTECTIONAll programs and the clock are protected against power loss by internal battery and individual battery-backed chips. Recorder can be disconnected from the power line for 5 years without loss of memory or clock time.SIGNAL IDENTIFICATIONCHANNEL IDENTIFICATIONAny number from 0 to 99 may be used to identify input channels. The channel ID number is printed at intervals from 1/1 0" to 10" and to the right of the trend line it represents. This number will never be printed over another number where channels are intersecting or superimposed.TAGLINESUp to 32 taglines of 6 characters each can be created and assigned to channels for explicit identification. Taglines will appear after the engineering unit while datalogging and on the right section display if the channel is programmed for display. The first three characters of the taglines assigned to channels may be printed in place of channel ID number when trend recording.INSTRUMENT IDENTIFICATION CODEUp to 5 characters may be stored as an identification code. This ID code will appear after the date/time reference in the computer output and to the right of date/time reference on the chart.Page 5 of 8DIGITAL DISPLAYContinuous or sequential large character display on the front panel of time of day plus channel number, alarm status, up to 5 digits of data with + or -sign and engineering units of any channels.PROMPTINGRecorder is easy to program with prompted menu steps displayed in English on the digital displays.TAGLINES ON RIGHT DISPLAYAssigned taglines can be displayed on the right side display to correspond with associated channels programmed for automatic or manual display on the left section. The left section will show channel input level with the corresponding tagline shown on the right section.CLOCKContinuous digital display of the time of day. The battery backed up clock oscillator will maintain correct time during power outages of up to 5 years.ALARM DISPLAYWhen any channel exceeds one of its alarm set points the right section digital display will show the channel number, high or low alarm, up to 5 digits of data with + or -sign and the engineering unit such as C, F, LPM, GPM, etc. If several channels are in alarm at the same time the display will show each channel in turn for 2 seconds. The right display can be programmed to show either the alarm status of all channels turned on, or to present associated taglines of channels that are being displayed on the left section. If one of the optional alarm relays has been activated in either display format, that relay number will be displayed in far right of right digital display.Page 6 of 8COMMON MODE VOLTAGE170 VAC RMS channel to ground with optional high common mode input board. +/-15 volt maximum with standard input board.DIELECTRIC STRENGTH1,000 V power transformer primary ground; 1,000 V relay contacts to ground; 1,000 V power transformer primary to sensor input terminals.COMMON MODE REJECTION RATIOBetter than 120 db.INPUT IMPEDANCEGreater than 1 Megohm at DC.NORMAL MODE REJECTION RATIOBetter than 45 db at 60 Hz; 70 db at 1 KHz.POWER REQUIREMENTSLess than 100 watts peak power; 50 watts average power. Selector switch for 100, 115, 220 or 240 volts. Operates on either 50 or 60 Hz.OPERATING TEMPERATURE32°F to 140°F (0 to 60°C); 5% to 98% noncondensing relative humidity.MOUNTING2702 has rubber feet for bench top applications and flanges for 19" rack mounting. Jack screws for panel mounting are available as an option. Panel cutout dimensions are 10.125" H X 17.062" W (+0.06/- 0.0), metric: 25.72 cm H X 43.34 cm W (+ 1.5/-0.0).CHASSIS SLIDESEntire chassis slides out and removes for easy access. The rear panel is hinged and removable also.DIMENSIONS17.75" (45 cm) wide X 10.5" (26.7 cm) high X 15.5" (39.74 cm) front to back.WEIGHTNet 48 Ibs. (21.8 kg). Shipping weight 57 Ibs. (26 kg).Page 7 of 8COMMON MODE VOLTAGE170 VAC RMS channel to ground with optional high common mode input board. +/-15 maximum with standard input board.DIELECTRIC STRENGTH1000V power transformer primary to ground: 1000V relay contacts to ground; 1000V power transformer primary to sensor input terminals.COMMON MODE REJECTION RATIOBetter than 120db.INPUT IMPEDANCEGreater than 1 Megohm at DC.NORMAL MODE REJECTION RATIOBetter than 45db at 60 Hz; 70db at 1 KHz.POWER REQUIREMENTSLess than 100 watts peak power; 50 watts average power. Specify 110' 115, 220, or 240 V AC operating voltage when ordering. Operates on 50 or 60 Hz.OPERATING TEMPERATURE32°F to 140F (0 to 60°C); 5% to 98% noncondensing relative humidity.DIMENSIONS17" (43.2 cm) wide x 15.125" (38.4 cm) high x 11.35" (28.8 cm) front to back.WEIGHTNet 28.5Ibs. (12.9 kg). Shipping weight 41Ibs. (18.6 kg).Page 8 of 8。

美国巴克莱尼公司产品目录说明书

121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。

Chelsea 230、231、270、271系列PTO商品说明书

X
AF
X
RF
X
XS
XU
XR
X
AC
AB
XY
X
XX
X
231
250
A, B, D, K, Q, U D
225 - 250
120
21.4 - 23.5
13.3
42.8 - 47
26.6
49
25
X
X X
X X
X X
X
X X
X
X
X
X
X
X
X
X
X
X X
251
270
271
442
D
A, B, D, K A, B, D, K FHV
120
300
250
165
13.3
28.5
26.6
57
25
49
23.5
15.7
47
31.4
49
41
X
X
X
X
X X X X
X
X
X
X
X
X X X X
X
X X X X
X
X
X
X
X
X
X
X
X
X
X X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Series
230
Output Types
Option Code
Special Pump for Europe

吉佛兰电子设备产品介绍说明书

AUTOMATIONPOWER CONTROLSOLID STATE RELAYS, AND POWER CONTROLLERSENG C O D . 81141D - 03/20152Thanks to forty years of experience, Gefran is the world leader in the design and production of solutions for measuring, controlling, and driving industrial production processes .We have 14 branches in 12 countries and a network of over 80 worldwide distributors.For 40 years, Gefran has been designing and producing technologically advanced actuators and solid state relays to control resistive/inductive loads and infrared lamps used in modern temperature control systems.Our knowledge of the market transforms your needs into practical, high-quality answers.QUALITY AND TECHNOLOGYGefran components are a concentrate of technology , the result of constant research and of cooperation with major research centres .Thanks to its complete line of controllers and actuators , Gefran can be your sole provider of solutions for electrical heating control .Gefran’s know-how and experience guarantee continuous and practical solutions.SERVICESA team of Gefran experts works with the customer to select the ideal product for its application and to help install andconfiguredevices(***********************).Gefran offers a wide range of courses at different levels for the technical-commercial study of the Gefran product range as well as specific courses on demandIn addition to foreseeing the market’s application needs, Gefran forms partnerships with its customers to find the best way to optimise and boost the performance of various applications .Gefran products communicate with one another to provide integrated solutions, and can dialogue with devices by other companies thanks to compatibility with numerous fieldbuses.APPLICATIONSPLASTICS HEAT TREATMENTGLASSENERGYPAPERFOODSOFTWAREGF_eXpressConfiguration kit for Gefran instruments by means of PC (Windows environment).- A single software for all models- Easy configuration- Copy/paste, save recipe, trendfunctions- Rapid configuration of instruments- Saving and management of parameterrecipes- On-line trend and saving of historicaldata- Recovery of factory settings- Custom linearization- On-line user manual- Easy programming with custom messages- Easy graphics programming with setpointprogrammersIR SOLUTIONPRINTINGTEXTILEPLASTICS – BLOWINGWOODWORKING MACHINESPHOTOVOLTAICSAUTOMOTIVE Halogen - 2500°CShort Wave - 2200°C4SOLID STATE RELAYS, AND POWER CONTROLLERSGTF - GFWGTF and GTF-XTRAGTF is the new line of GEFRAN power controllers, designedto control all types of industrial electric heaters.Versatility, plus easy and guided configuration with GEFRAN(25,40A)(400, 600A)(400, 600A)GS (15... 120A)GD (40A)SOLID STATE RELAYS, AND POWER CONTROLLERSFIELDBUS*(25...60A)GTF(25...250A)GFWFIELDBUS*GFX4-IRFIELDBUS* (25... 120A)GT(25... 120A)(*) European Patent N° 2660843 8SOLID STATE RELAYS, AND POWER CONTROLLERS(*) European Patent N° 2660843 10SOLID STATE RELAYS, AND POWER CONTROLLERSnot availablex = (1pcs)SOLID STATE RELAYS, AND POWER CONTROLLERS(**) Valid formulas for Vline=Vload(***) For these applications it is recommanded to contact the Gefran specialistsnon disponibilex = (1pz)SOLID STATE RELAYS, AND POWER CONTROLLERS(**) Valid formulas for Vline=Vload(***) For these applications it is recommanded to contact the Gefran specialistsSPAINMEXICO TAIWAN INDIARUSSIABELGIUM UK TURKEYSINGAPOREGERMANYCHINA SWITZERLAND FRANCE USA BRAZILSOUTH AFRICAITALYDrive & Motion Control Unit Via Carducci, 2421040 GERENZANO (VA) ITALY Ph. +39 02967601Fax +39 029682653**********************Technical Assistance:*********************Customer Service*************************Ph. +39 02 96760500 Fax +39 02 96760278GEFRAN HEADQUARTER Via Sebina, 7425050 PROVAGLIO D’ISEO (BS) ITALY Ph. +39 03098881Fax +39 0309839063GEFRAN DEUTSCHLAND GmbH Philipp-Reis-Straße 9a D-63500 Seligenstadt Ph. +49 (0) 61828090Fax +49 (0) 6182809222******************SIEI AREG - GERMANY Gottlieb-Daimler Strasse 17/3D-74385 - Pleidelsheim Ph. +49 (0) 7144 897360Fax +49 (0) 7144 8973697****************SENSORMATE AGSteigweg 8,CH-8355 Aadorf, Switzerland Ph. +41(0)52-2421818 Fax +41(0)52-3661884http://www.sensormate.ch GEFRAN FRANCE SA4, rue Jean Desparmet - BP 823769355 LYON Cedex 08Ph. +33 (0) 478770300Fax +33 (0) 478770320********************GEFRAN BENELUX NV ENA 23 Zone 3, nr . 3910 Lammerdries-Zuid 14A B-2250 OLENPh. +32 (0) 14248181Fax +32 (0) 14248180**************GEFRAN UK Ltd Unit 7Brook Business Centre 54a Cowley Mill Road Uxbridge UB8 2FXPh. +44 (0) 8452 604555Fax +44 (0) 8452 604556 ***************.ukGEFRAN ESPAÑACalle Vic, números 109-11108160 - MONTMELÓ(BARCELONA)Ph. +34 934982643Fax +34 935721571**************************GEFRAN MIDDLE EAST ELEKTRIK VE ELEKTRONIK San. ve Tic. Ltd. Sti Yesilkoy Mah. AtaturkCad. No: 12/1 B1 Blok K:12 D: 389 Bakirkoy /Istanbul TURKIYEPh. +90212 465 91 21Fax +90212 465 91 22GEFRAN RUSSIA4 Lesnoy pereulok, 4B usiness center “White Stone” 125047, Moscow, Russia Tell: +7 (495) 225-86-20 Fax: +7 (495) 225-85-00GEFRAN SOUTH AFRICA Pty Ltd.Unit 10 North Precinet, West Bu-ildingTopaz Boulevard Montague Park, 7411, Cape Town Ph. +27 21 5525985 Fax +27 21 5525912GEFRAN SIEIDrives Technology Co., Ltd No. 1285, Beihe Road, Jiading District, Shanghai, China 201807Ph. +86 21 69169898Fax +86 21 69169333***************.cnGEFRAN INDIASurvey No: 182/1 KH, Bhukum, Paud road, Taluka – Mulshi,Pune - 411 042. MH, INDIA Phone No.:+91-20-39394400Fax No.: +91-20-39394401**********************GEFRAN TAIWANNo.141, Wenzhi Rd., Zhongli City, Taoyuan County 32054, Taiwan (R.O.C.)Ph. +886-3-4273697*********************.sg GEFRAN Inc.8 Lowell AvenueWINCHESTER - MA 01890Toll Free 1-888-888-4474Fax +1 (781) 7291468******************GEFRAN BRASILELETROELETRÔNICA Avenida Dr . Altino Arantes,377 Vila Clementino04042-032 SÂO PAULO - SP Ph. +55 (0) 1155851133Fax +55 (0) 1132974012********************.br。

X-荧光仪英译汉说明书

MXF-2400型多通道X-射线荧光分析仪使用说明书岛津公司分析测量分部本说明书中讲述了仪器的详细构造和工作原理，并且介绍了大量我们在仪器设计方面的技术秘密，以便用户更加充分的了解和使用仪器。

我们敬请广大用户不要把本说明书送给或借给他人；也不要向他人描述本说明书中的内容。

安全使用仪器内部会产生对人体有害的X-射线和高压。

为了安全使用仪器要注意下面的内容。

关于X-射线疾病预防1、本仪器属于“X-射线设备”。

它符合“电磁辐射疾病1、原理和构造1.1 测量原理当X-射线管产生的X-射线(以下叫做初始X-射线)照射到被测样品时，组成样品的每一种元素都会反射出具有特殊波长的X射线(以下叫做特征X-射线或荧光X-射线)。

由于样品是由多种成分组成的，所以该荧光X-射线是由各种特征X-射线混合而成的。

每一个量角仪都是根据每种特征X-射线的波长设置的。

因此，如果该混合荧光被反射到某一个量角仪上，那么只有相应组分发出的特征X-射线才会被量角仪中的晶体有选择性地反射到探测器上。

探测器也安装于量角仪上。

被检测到的X-射线的强度同相应组分的含量成比例。

因此，通过测量一定时间内检测到的X-射线的总量就可以得到相应组分的含量。

本仪器可以同时检测、测量并记录下各种元素所发出的X-射线。

1.2 X-射线管X-射线管直立于主机的中心部位。

它是由美国VARIAN公司制造的.激发灯丝所产生热电子通过高压被加速。

当这些被加速的热电子撞击到靶金属(以下叫做靶)时，靶会产生连续波长的X射线(以下叫做连续X-射线)和靶金属的特征X-射线。

这两种射线混合后组成的光束即初始X-射线。

初始X射线通过一个位于X-射线管底部的厚0.076mm的铍窗照射到被测样品上。

X-射线管的靶金属是铑，所以初始X射线就是由X-射线和和靶金属的特征X射线混合而成的。

(RHK，RHL)。

RH-K线和RH-L线有助于X-射线分别激发样品中的重元素和轻元素。

当热电子光束撞击靶时，超过99%的动能转化成热能，在转化中靶会被加热。

毯浩伊龙系统自动化控制有限公司商品说明书

ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
PDP 03VRS
DOK-ECODRV-PDP-03VRS**-FKB1-EN-P • 11.96 **********************************************************(+34)960624301
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller
ECODRIVE DKC03.1 Drive Controller

阿美泰克2014样本

郑重声名
本手册内所有资料和图片版权均归阿美泰克所有，禁止仿冒。未经上海阿美泰克工业设备有限公司书面许可，本手册内容不得被复制或抄袭。商标及图形标志为注册商标。
阿美泰克公司保留更改产品设计、规格、参数的权利，恕不另行通知，以产品随机资料为准。本手册内所有资料和图片仅供参考，以实物为准。如有任何印刷错漏，本公司不承担因此产生的后果，公司保留对资料内有关内容的最终解释权。
Add: No.26 faxiang road,Jiangqiao town, Jiading district,Shanghai
P.C: 201803 Tel: +86 21 59145555 Fax: +86 21 59141111 Http: Email: ametech@
免粘贴的垫片
由于粘贴垫片的粘合剂对介质及胶垫本身有污染与侵蚀，同时在检修时不易拆装。我们采取了卡扣式挂垫方式，既方便使用维护，又防止粘合剂对人员及环境的危害。
方便的接口形式
对换热器与其它设备连接，通常使用螺栓连接，可以避免焊接对换热器的损害；根据客户需要，也可以采用焊接连接，我们通过采用加长接口的方法，防范焊接损害。
相邻板片的波纹波峰相互接触，形成网状支撑，大大提高板片的结构强度，可以承受较大压力，保证换热器的安全性、延长设备的使用寿命。
技术规范和质量保证体系
美国 ASME 日本 JIS 标准美国 3A 卫生标准
德国 TUV 标准中国 NB/T47004 ISO9001/14001/18000
板式换热器结构
简
和专业的客户服务。阿美泰克建立和完善了销售服务网络，在各省、市设有 350 多个分支机构，拥有专业
介
的销售服务队伍，3 个技术培训和产品中心，产品提供全国或全球联保服务，能就近为广大客户提供专业、快速、高效的技术支持与优良的营销服务。

派克核电门户网站产品说明书

10 CFR 50 • AERB • ASME QME-1* • ASME QSC (NCA-3800) • ASME 第 III 部分 • ASME U核级认证核级认证 • ASN • CNSC CRN-N* HAF 604 • IAEA SC-QA 780 298* • IEEE* • ISO 9001: •E 派克核电门户网站无论您是要建新的发电厂，还是要改进现有电厂，派克都会依照行业统一的质量保证计划，使不同部门的各种产品进入核电市场，提高生产率和利润率。

这些产品包括安全专项和安全相关的核级子系统和组件，以及为非管制工厂区提供的优质的“成熟”商品。

派克门户网站是我们投入数百万美元用于核能研究和发展的承诺之一，是我们承诺提获得越来越多在全球供应且通过认证的核能产品的单一途径。

供行业所要求的高效性、可靠性和成本效益的体现。

我们支持单源购买各种产品系列，通过最新的订购方式提高工厂生产率和利润率。

另外，我们在将近 50 个国家拥有 50,000 名员工，因而门户网站产品在全球都有供应。

有关订购门户网站产品的更多信息，请：拨打电话 256 885 3833（销售）、256 885 3880（技术支持）或发送电子邮件至 ipdusnuclear@parker .com派克核电门户网站是根据派克现行的 NQA- 1 和 10CFR50 附录 B 规定的质量保证计划开发的，并且采用了行业及规范性文件中规定的最佳实3 级阀门的 ASME N 核级认证外，派克核电门户网站上提供的产品符合 10CFR 第 21 部分中对基本组件的规定，按照认可的质保计划或是商品级物项执行。

专项不会提高质量，而是验证并记录专用项目中已有的的质量。

EU PED*HAF 604*IAEA SC-QA KTA 3507NNSANQA-1Parker Hanniﬁn Ltd.Tachbrook Park DriveTachbrook Park,Warwick, CV34 6TU英国电话：+44 (0) 1926 317 878传真：+44 (0) 1926 317 855********************欧洲、中东和非洲AE – 阿联酋，迪拜电话：+971 4 8127100********************AT – 奥地利，维也纳新城电话：+43 (0)2622 23501-0*************************AT – 东欧，维也纳新城电话：+43 (0)2622 23501 900****************************AZ – 阿塞拜疆，巴库电话：+994 50 2233 458****************************BE/LU – 比利时，尼韦尔电话：+32 (0)67 280 900*************************BY – 白俄罗斯，明斯克电话：+375 17 209 9399*************************CH – 瑞士，埃托瓦电话：+41 (0)21 821 87 00*****************************CZ – 捷克共和国，Klecany电话：+420 284 083 111*******************************DE – 德国，卡尔斯特电话：+49 (0)2131 4016 0*************************DK – 丹麦，巴勒鲁普电话：+45 43 56 04 00*************************ES – 西班牙，马德里电话：+34 902 330 001***********************FI – 芬兰，万塔河电话：+358 (0)20 753 2500parker. ****************FR – 法国，Contamine s/Arve电话：+33 (0)4 50 25 80 25************************GR – 希腊，雅典电话：+30 210 933 6450************************HU – 匈牙利，布达佩斯电话：+36 23 885 470*************************IE – 爱尔兰，都柏林电话：+353 (0)1 466 6370*************************IT – 意大利，Corsico (MI)电话：+39 02 45 19 21***********************KZ – 哈萨克斯坦，阿拉木图电话：+7 7273 561 000****************************NL – 荷兰，奥尔登扎尔电话：+31 (0)541 585 000********************NO – 挪威，阿斯克尔电话：+47 66 75 34 00************************PL – 波兰，华沙电话：+48 (0)22 573 24 00************************PT – 葡萄牙，莱萨·达·帕尔梅拉电话：351 22 999 7360**************************RO – 罗马尼亚，布加勒斯特电话：+40 21 252 1382*************************RU – 俄罗斯，莫斯科电话：+7 495 645-2156************************SE – 瑞典，Spånga电话：+46 (0)8 59 79 50 00************************SK – 斯洛伐克，班斯卡·比斯特里察电话：+421 484 162 252**************************SL – 斯洛文尼亚，新梅斯托电话：+386 7 337 6650**************************TR – 土耳其，伊斯坦布尔电话：+90 216 4997081************************UA – 乌克兰，基辅电话：+380 44 494 2731*************************UK – 英国，沃里克电话：+44 (0)1926 317 878********************ZA – 南非，坎普顿公园电话：+27 (0)11 961 0700*****************************北美地区CA – 加拿大，安大略省米尔顿电话：+1 905 693 3000US – 美国，克利夫兰电话：+1 216 896 3000亚太地区AU – 澳大利亚，城堡山电话：+61 (0)2-9634 7777CN – 中国，上海电话：+86 21 2899 5000HK – 香港电话：+852 2428 8008IN – 印度，孟买电话：+91 22 6513 7081-85JP – 日本，东京电话：+81 (0)3 6408 3901KR – 韩国，首尔电话：+82 2 559 0400MY – 马来西亚，莎阿南电话：+60 3 7849 0800NZ – 新西兰，惠灵顿电话：+64 9 574 1744SG – 新加坡电话：+65 6887 6300TH – 泰国，曼谷电话：+662 186 7000-99TW – 台湾，台北电话：+886 2 2298 8987南美AR – 阿根廷，布宜诺斯艾利斯电话：+54 3327 44 4129BR – 巴西，圣若泽杜斯坎普电话：+55 800 727 5374CL – 智利，圣地亚哥电话：+56 2 623 1216MX – 墨西哥，阿波达卡电话：+52 81 8156 6000核电门户网站手册 M&K 12/10 1M派克授权的本地经销商© 2010 派克汉尼汾公司派克全球办事处联系信息欧洲产品信息中心免费电话：00 800 27 27 5374(AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE,IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE,SK, UK, ZA)– 一点的方式。

LOCTITE 270产品说明书

Technical Data SheetLOCTITE®270™(TDS for new formulation of Loctite®270™) December2013 PRODUCT DESCRIPTIONLOCTITE®270™provides the following productLOCTITE®270™is designed for the permanent locking andsealing of threaded fasteners.The product cures whenconfined in the absence of air between close fitting metalsurfaces and prevents loosening and leakage from shock andvibration.LOCTITE®270™is particularly suited for heavy dutyapplications such as studs into motor housings,nuts onto studsin pump housings and other fasteners where high strength isrequired.LOCTITE®270™provides robust curingperformance.It not only works on active metals(e.g.brass,copper)but also on passive substrates such as stainless steeland plated surfaces.The product offers high temperatureperformance and oil tolerance.It tolerates minor surfacecontaminations from various oils,such as cutting,lubrication,anti-corrosion and protection fluids.NSF InternationalRegistered to NSF Category P1for use as a sealant wherethere is no possibilty of food contact in and around foodprocessing areas.Note:This is a regional approval.Pleasecontact your local Technical Service Center for moreinformation and clarification.TYPICAL PROPERTIES OF UNCURED MATERIALSpecific Gravity@ 25°C 1.1Flash Point-See SDSViscosity,Brookfield -RVT, 25°C,mPa·s(cP):Spindle2,speed20rpm,400 to600LMSViscosity,Cone&Plate,25°C,mPa·s(cP):Cone C60/1°Ti@shear rate 129s-1450TYPICAL CURING PERFORMANCECure Speed vs.SubstrateThe rate of cure will depend on the substrate used. The graphbelow shows the breakaway strength developed with time onM10steel nuts and pared to different materials andtested according to ISO10964.%ofFullStrengthonSteelCure Time100806040201min5min10min30min1h3h6h24h72hBrassStainlesssteelZinc dichromateCr free, Zinc organicSteelCure Speed vs.Bond GapThe rate of cure will depend on the bondline gap. Gaps inthreaded fasteners depends on thread type,quality and size.The following graph shows shear strength developed with timeon steel pins and collars at different controlled gaps and testedaccording to ISO10123.%ofFullStrengthonSteelCure Time1007550251min5min10min30min1h3h6h24h72h.5mm.15mm.25mmCure Speed vs.TemperatureThe rate of cure will depend on the temperature.The graph below shows the breakaway strength developed with time at different temperatures on M10steel nuts and bolts and tested according to ISO 10964.% o f F u l l S t r e n g t h o n S t e e lCure Time1007550251min5min10min 30min 1h3h 6h 24h 72h5°C22 °C40 °CCure Speed vs.ActivatorWhere cure speed is unacceptably long,or large gaps are present,applying activator to the surface will improve cure speed.The graph below shows the breakaway strength developed with time on M10zinc dichromate steel nuts and bolts using Activator 7471™,7649™,7088™and 7091™and tested according to ISO 10964.% o f F u l l S t r e n g t h o n S t e e lCure Time1008060402001min5min10min 30min 1h3h6h24h 72h7471™7649™7088™7091™N oA c t iv a t o rTYPICAL PERFORMANCE OF CURED MATERIALAdhesive PropertiesCured for 24 hours @22°CBreakaway Torque,ISO 10964,Unseated:M10 steel nuts and bolts N·m 33(lb.in.) (290)M6 steel nuts and bolts N·m 5(lb.in.) (45)M16 steel nuts and bolts N·m 90(lb.in.) (800)3/8x 16steel nuts (grade 2) and bolts (grade 5) N·m 31 (lb.in.) (275)Prevail Torque @180°,ISO 10964,Unseated:M10 steel nuts and bolts N·m 33(lb.in.) (290)M6 steel nuts and bolts N·m 3(lb.in.) (26)M16 steel nuts and bolts N·m 125(lb.in.) (1,100)3/8x 16steel nuts (grade 2) and bolts (grade 5) N·m 33 (lb.in.) (290)Breakloose Torque,ISO 10964,Pre-torqued to 5N·m:M10 steel nuts and bolts N·m 39(lb.in.) (345)3/8x 16steel nuts (grade 2) and bolts (grade 5) N·m 35 (lb.in.) (310)Prevail Torque @180°,ISO 10964,Pre-torqued to 5N·m:M10 steel nuts and bolts N·m 25(lb.in.) (220)3/8x 16steel nuts (grade 2) and bolts (grade 5) N·m 31 (lb.in.) (275)Compressive Shear Strength, ISO 10123:Steel pins and collars N/mm² ≥9.0LMS(psi) (≥1,305)Cured for 1 week @22ºC,Breakloose Torque,ISO 10964,Pre-torqued to 5N·m:M10 zinc phosphate nuts and bolts N·m 46(lb.in.) (400)M10 stainless steel nuts and bolts N·m 30(lb.in.) (265)TYPICAL ENVIRONMENTAL RESISTANCECured for 1 week @22°CBreakloose Torque,ISO 10964,Pre-torqued to 5N·m:M10 zinc phosphate steel nuts and boltsHot StrengthTested at temperature% S t r e n g t h @ 22 °CTemperature, °C120100806040200050100150200Heat AgingAged at temperature indicated and tested @22°C% I n i t i a l S t r e n g t h @ 22 °CExposure Time, hours1251007550250010002000300040005000100 °C120 °C150 °C180 °C200 °CHeat Aging/Hot StrengthAged under conditions indicated and tested at temperature% I n i t i a l S t r e n g t h @ 22 °CExposure Time, hours120100806040200010002000300040005000100 °C120 °C150 °C180 °C200 °CChemical/Solvent ResistanceAged under conditions indicated and tested @22°C.%of initial strength Environment °C 500h1000h 5000h Motor oil125657575Unleaded gasoline 22909595Brake fluid 22105105100Water/glycol 50/5087758590Acetone 229595100Ethanol 22959595E85Ethanol fuel 22959595B100Bio-Diesel22100100110Breakloose Torque,ISO 10964,Pre-torqued to 5N·m:M10Stainless steel nuts and bolts%of initial strength Environment°C 500h1000h 5000h Sodium Hydroxide,20%22756555Phosphoric Acid,10%221009565GENERAL INFORMATIONThis product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.For safe handling information on this product,consult the Safety Data Sheet (SDS).Where aqueous washing systems are used to clean the surfaces before bonding,it is important to check for compatibility of the washing solution with the adhesive. In some cases these aqueous washes can affect the cure and performance of the adhesive.This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). Users are recommended to confirm compatibility of the product with such substrates.Directions for use:For Assembly1.For best results,clean all surfaces (external and internal)with a LOCTITE ® cleaning solvent and allow to dry.2.If the cure speed is too slow,use appropriate activator.Please see the Cure Speed vs.Activator graph for reference.Allow the activator to dry when needed.3.To prevent the product from clogging in the nozzle,do notallow the tip to touch metal surfaces during application.4.For Thru Holes ,apply several drops of the product ontothe bolt at the nut engagement area.5.For Blind Holes ,apply several drops of the product to thelower third of the internal threads in the blind hole,or the bottom of the blind hole.6.For Sealing Applications ,apply a 360°bead of productto the leading threads of the male fitting,leaving the first thread free. For bigger threads and voids,adjust product amount accordingly and apply a 360°bead of product on the female threads also.7.Assemble and tighten as required.For Disassembly1.Remove with standard hand tools.2.In rare instances where hand tools do not work becauseof excessive engagement length,apply localized heat to nut or bolt to approximately 250°C. Disassemble while hot.3.Apply localized heat to the assembly to approximately250°C. Disassemble while hot.For Cleanup1.Cured product can be removed with a combination ofsoaking in a Loctite solvent and mechanical abrasion such as a wire brush.Loctite Material Specification LMSLMS dated June26,2009. Test reports for each batch are available for the indicated properties. LMS test reports include selected QC test parameters considered appropriate to specifications for customer use. Additionally,comprehensive controls are in place to assure product quality and consistency. Special customer specification requirements may be coordinated through Henkel Quality.StorageStore product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.Optimal Storage: 8°C to21°C. Storage below8°C or greater than28°C can adversely affect product properties Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.If additional information is required, please contact your local Technical Service Center or Customer Service Representative.Conversions(°C x1.8)+32=°FkV/mm x25.4=V/milmm/25.4=inchesµm/25.4=milN x0.225=lbN/mm x5.71=lb/inN/mm²x145=psiMPa x145=psiN·m x 8.851= lb·inN·m x0.738=lb·ftN·mm x0.142=oz·inmPa·s=cPNote:The information provided in this Technical Data Sheet(TDS)including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS.The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control.Henkel is, therefore,not liable for the suitability of our product for the production processes and conditions in respect of which you use them,as well as the intended applications and results.We strongly recommend that you carry out your own prior trials to confirm such suitability of our product.Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s)regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law.In case products are delivered by Henkel Belgium NV,Henkel Electronic Materials NV,Henkel Nederland BV,Henkel Technologies France SAS and Henkel France SA please additionally note the following:In case Henkel would be nevertheless held liable,on whatever legal ground, Henkel’s liability will in no event exceed the amount of the concerned delivery.In case products are delivered by Henkel Colombiana,S.A.S.the following disclaimer is applicable:The information provided in this Technical Data Sheet(TDS)including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS.Henkel is, therefore,not liable for the suitability of our product for the production processes and conditions in respect of which you use them,as well as the intended applications and results.We strongly recommend that you carry out your own prior trials to confirm such suitability of our product.Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s)regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law.In case products are delivered by Henkel Corporation,Resin Technology Group,Inc.,or Henkel Canada Corporation,the following disclaimer is applicable:The data contained herein are furnished for information only and are believed to be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control.It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.In light of the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied,including warranties of merchantability or fitness for a particular purpose,arising from sale or use of Henkel Corporation’s products.Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits.The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions.We recommend that each prospective user test his proposed application before repetitive use,using this data as a guide.This product may be covered by one or more United States or foreign patents or patent applications.Trademark usageExcept as otherwise noted,all trademarks in this document are trademarks of Henkel Corporation in the U.S.and elsewhere. ®denotes a trademark registered in the U.S.Patent and Trademark Office.Reference0.2。

伊玛产品类别

四线
18~36 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
PA1108
智慧型
7 LED
内螺纹
G 1/4
400 bar
四线
18~36 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
PA1109
智慧型
7 LED
内螺纹
G 1/4
2 bar
四线
18~36 VDC
200
60
M12
接插件
N
Y
N
IP67
否
IA0031
齐平
brass
10~36VDC
1
两线
NO
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
IA0032
齐平
brass
10~36VDC
1
两线
NC
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
IA0033
非齐平
brass
10~36VDC
可
TA1099
智慧型
7 LED
内螺纹
M18 X 1.5
-40~150°C
四线
20~30 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
产品类别
压力变送器(模拟量输出)
压力变送器(开关量输出)
订货号
功能
显示
牙口形式

Belimo B217 铝合金球式阀门数据表说明书

B217•ApplicationStainless Steel Ball and StemTechnical dataFunctional dataValve Size 0.75" [20]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 600 psi Close-off pressure ∆ps 200 psiFlow characteristic equal percentage Servicing maintenance-free Flow Pattern 2-way Leakage rate0% for A – AB Controllable flow range 75°Cv4.7Cv Flow RatingA-port: as stated in chart B-port: 70% of A – AB CvMaterialsValve body Nickel-plated brass body Spindle stainless steel Spindle seal EPDM (lubricated)SeatPTFE Characterizing disc TEFZEL®Pipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuators Non-SpringTR LRB(X)NR SpringTFRB(X)LFSafety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to Product featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable flow.B217 Flow/Mounting detailsTwo-way valves should be installed with thedisc upstream.DimensionsDimensional drawingsLRB, LRXType DN Weight [kg][kg]B217200.30A B C D E F H1H29.4" [239] 2.7" [69] 5.8" [147] 5.1" [129] 1.3" [33] 1.3" [33] 1.2" [30]1" [25]TRA B C D E F4.0" [102] 2.7" [69]5.4" [137] 5.1" [129] 1.3" [33] 1.3" [33]TFRB, TFRXA B C D E F7.0" [178] 2.7" [69] 5.5" [139] 4.8" [122] 1.5" [39] 1.5" [39]LFA B C D E F8.6" [218] 2.7" [69] 6.3" [159] 5.6" [142] 1.8" [46] 1.8" [46]B217ARB N4, ARX N4, NRB N4, NRX N4A B C D E F11.4" [289] 2.7" [69]7.8" [199]7.1" [181] 3.1" [80] 3.1" [80]LRB24-SR-T Modulating, Non-Spring Return, 24 V, for DC2...10 V or 4...20 mATechnical dataElectrical data Nominal voltage AC/DC 24 VNominal voltage frequency50/60 HzPower consumption in operation 1.5 WPower consumption in rest position0.2 WPower consumption for wire sizing 3 VATransformer sizing 3 VA (class 2 power source)Electrical Connection Screw terminal (for 26 to 14 GA wire)Overload Protection electronic thoughout 0...90° rotationFunctional data Operating range Y 2...10 VOperating range Y note 4...20 mA w/ ZG-R01 (500 Ω, 1/4 W resistor)Input Impedance100 kΩ for 2...10 V (0.1 mA), 500 Ω for 4...20 mAPosition feedback U 2...10 VPosition feedback U note Max. 0.5 mADirection of motion motor selectable with switch 0/1Manual override external push buttonAngle of rotation90°Angle of rotation note adjustable with mechanical stopRunning Time (Motor)default 90 s, variableNoise level, motor35 dB(A)Position indication Mechanically, pluggableSafety data Degree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency Listing cULus acc. to UL60730-1A/-2-14, CAN/CSAE60730-1:02, CE acc. to 2014/30/EUListed to UL 2043 - suitable for use in airplenums per Section 300.22(C) of the NEC andSection 602 of the IMCQuality Standard ISO 9001Ambient temperature-22...122°F [-30...50°C]Storage temperature-40...176°F [-40...80°C]Ambient humidity Max. 95% RH, non-condensingServicing maintenance-freeWeight Weight 1.1 lb [0.50 kg]LRB24-SR-TServicingAccessoriesElectrical accessoriesDescriptionType Battery backup system, for non-spring return models NSV24 US Battery, 12 V, 1.2 Ah (two required)NSV-BAT Auxiliary switch 1 x SPDT add-on S1A Auxiliary switch 2 x SPDT add-onS2AFeedback potentiometer 140 Ω add-on, grey P140A GR Feedback potentiometer 1 kΩ add-on, grey P1000A GR Feedback potentiometer 10 kΩ add-on, grey P10000A GR Feedback potentiometer 2.8 kΩ add-on, grey P2800A GR Feedback potentiometer 500 Ω add-on, grey P500A GR Feedback potentiometer 5 kΩ add-on, greyP5000A GRElectrical installationINSTALLATION NOTESProvide overload protection and disconnect as required.Actuators may be connected in parallel. Power consumption and input impedance must beobserved.Actuators may also be powered by DC 24 V.Only connect common to negative (-) leg of control circuits.A 500 Ω resistor (ZG-R01) converts the 4...20 mA control signal to 2...10 V.Actuators are provided with a numbered screw terminal strip instead of a cable.Meets cULus requirements without the need of an electrical ground connection.Warning! Live electrical components!During installation, testing, servicing and troubleshooting of this product, it may be necessary to work with live electrical components. Have a qualified licensed electrician or other individual who has been properly trained in handling live electrical components perform these tasks. Failure to follow all electrical safety precautions when exposed to live electrical components could result in death or serious injury.Wiring diagrams2...10 V / 4...20 mA ControlInstallation notesDimensions。

伊莱克斯电磁阀说明书

8 16 16 2 0 / 2 5 (2) 25 2 0 / 2 5 (2) 45 45 20/80 (2) 20/80 (2) 20/80 (2) 20/80 (2) 20/80 (2) 60/240 (2) 60/240 (2) 80/320 (2) 90/360 (2) 90/360 (2)
外形尺寸 OV E R ALL DIM E N S IO N S (m m )
FG6 Rp 2"
56
2/ 6 208 128 182 2000 330
Ｃ
GAS FLOW CHART (PRESSURE DROP)
ＡＣ
ＢＢ
Ａ
Description The VMR type is a fast opening and fast closing solenoid valve that is normally closed. When not energized the spring works on the seat keeping the gas passage closed. When the coil is powered the valve is rapidly opened.If the power supply is shut off,the valve rapidly closed.
FLOW FACTOR
KVS(m 3/h)
VM R 01--OT N VM R 02--OT N VM R 12--OT N
VMR0 VM R 12-A
VMR1 VMR2 VMR3 VM R35 VMR4 VMR6 VM R4F VM R6F VMR7 VMR8 VMR9 VM R93 VM R95
-
-
2.50

艾特顿 199160 商品说明说明书

Eaton 199160Eaton Moeller® series PKZM0 Motorschutzschalter, 9 kW, 16 - 20 A, Push-in-KlemmenAllgemeine spezifikationEaton Moeller® series PKZM0 Motor-protective circuit-breaker19916075 mm109 mm 45 mm 0.349 kgIEC/EN 60947 VDE 0660 UL CSAIEC/EN 60947-4-1 UL 60947-4-1CSA-C22.2 No. 60947-4-1-14 CEUL File No.: E36332UL Category Control No.: NLRV CSA File No.: 165628 CSA Class No.: 3211-05 UL CSA4015081972449PKZM0-20-PIProduktnameKatalognummer Produkt Länge/Tiefe Produkthöhe Produktbreite Produktgewicht Zertifikat(e)EANModellcodeDrehknopfPhasenausfallempfindlichkeit (gemäß IEC/EN 60947-4-1, VDE 0660 Teil 102)MotorschutzPhasenausfallempfindlich3-polig 100.000 Schaltvorgänge100.000 SchaltvorgängeHutschienenmontage optionalAufschnappbar auf Hutschiene IEC/EN 60715 mit 7,5 oder 15 mm Höhe.40 Schaltspiele/hIII3MotorschutzschalterFinger- und handrückensicher, Berührungsschutz bei senkrechter Betätigung von vorne (EN 50274)6000 V AC25 g, Mechanisch, entsprechend IEC/EN 60068-2-27, Halbsinusstoß 10 msAuch Motoren mit Effizienzklasse IE3Nebenstromkreis: Manueller Typ E bei Einsatz mit Klemme, oder geeignet für Gruppeninstallationen, (UL/CSA)≤ 0,25 %/K, Restfehler für T > 40°-25 - 55 °C, Arbeitsbereich-5 - 40 °C gemäß IEC/EN 60947, VDE 0660Motorstarterkombinationen Typ MSC…Stellgliedtyp Merkmale Funktionen Polzahl Lebensdauer, elektrischLebensdauer, mechanisch MontagemethodeEinbaulageBetriebsfrequenzÜberspannungskategorie VerschmutzungsgradProduktkategorieSchutzBemessungsstoßspannungsfestigkeit (Uimp) SchockfestigkeitGeeignet fürTemperaturkompensationVerwendet mitMax. 2000 m-25 °C55 °C25 °C40 °C40 °C80 °CFeuchte Wärme, zyklisch, nach IEC 60068-2-30 Feuchte Wärme, konstant, nach IEC 60068-2-781 x (1 - 6) mm²18 - 812 mm50 Hz60 Hz20 A5.5 kW9 kW690 V690 V20 A18 kA, 240 V, SCCR (UL/CSA) mit Leistungsschütz DILM25 18 kA, 480 Y/277 V, SCCR (UL/CSA) mit Leistungsschütz DILM25310 A, Irm, Einstellbereich max.± 20% Toleranz, AuslöserblöckeGrundgerät befestigt 15,5 x lu, Auslöserblöcke 1.5 HP 5 HP 3 HP 15 HPHöheUmgebungsbetriebstemperatur – min Umgebungsbetriebstemperatur – max Umgebungsbetriebstemperatur (gekapselt) – min Umgebungsbetriebstemperatur (gekapselt) – max Umgebungstemperatur Lagerung - min Umgebungstemperatur Lagerung - max Klimafestigkeit Anschlusskapazität (feindrähtig)Anschlusskapazität (ein-/mehrdrähtig AWG)Abisolierlänge (Hauptleiter)Bemessungsfrequenz - minBemessungsfrequenz - max Bemessungsbetriebsstrom (Ie) Bemessungsbetriebsleistung bei AC-3, 220/230 V, 50 Hz Bemessungsbetriebsleistung bei AC-3, 380/400 V, 50 Hz Bemessungsbetriebsspannung (Ue) - min Bemessungsbetriebsspannung (Ue) - max Bemessungsdauerstrom (Iu)Bemessungskurzschlussstrom (Typ E) Kurzschlussauslöser Zugeor. Motorleist. b. 115/120 V, 60 Hz, 1-phasig Zugeordnete Motorleistung bei 200/208 V, 60 Hz, 3-phasig Zugeordnete Motorleistung bei 230/240 V, 60 Hz, 1-phasig Zugeordnete Motorleistung bei 575/600 V, 60 Hzm 3-phasigPush-In Klemmen020 A20 AÜberlastauslöser: Auslöseklasse 10 A 5.82 W0 W0 W0 WAnforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Anforderungen der Produktnorm sind erfüllt.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Anforderungen der Produktnorm sind erfüllt.Verbindung Anzahl der Hilfskontakte (Wechsler)Anzahl der Hilfskontakte (Öffner)Anzahl Hilfskontakte (Schließer)Überlastauslösestromeinstellung - min Überlastauslösestromeinstellung - max Auslösecharakteristik Geräteverlustleistung, stromabhängig pvid Verlustleistungskapazität PdissVerlustleistung pro Pol, stromabhängig, PvidStatische Verlustleistung, stromunabhängig PVS10.2.2 Korrosionsbeständigkeit10.2.3.1 Wärmebeständigkeit von Umhüllung10.2.3.2 Widerstandsfähigkeit Isolierstoffe gewöhnliche Wärme 10.2.3.3 Widerst. Isolierstoffe abnorm. Wärme/Feuer durch int. elektr. Auswirk.10.2.4 Beständigkeit gegen UV-Strahlung10.2.5 Heben10.2.6 Schlagprüfung10.2.7 BeschriftungenUnzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Anforderungen der Produktnorm sind erfüllt.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Unzutreffend, da die gesamten Schaltgeräte überprüft werden müssen.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Liegt in der Verantwortung des Schaltanlagenbauers.Die Erwärmungsberechnung liegt in der Verantwortung des Schaltanlagenbauers. Eaton stellt Verlustleistungsdaten der Geräte bereit.Liegt in der Verantwortung des Schaltanlagenbauers. Die Spezifikationen für die Schaltgeräte müssen beachtet werden.Liegt in der Verantwortung des Schaltanlagenbauers. Die Spezifikationen für die Schaltgeräte müssen beachtet werden.Das Gerät erfüllt die Anforderungen, wenn die Informationen in der Montageanweisung (IL) beachtet werden.DA-DC-00004889.pdfDA-DC-00004919.pdfETN.PKZM0-20-PI.edzIL122024ZUWIN-WIN mit Push-in-TechnikProduktübersicht für den Maschinenbau Sortimentskatalog Motoren schalten und schützenpkzm0_pi.stpmotorschutzschalter_bis_32a_pi.dwgeaton-manual-motor-starters-pkz-dimensions.epseaton-manual-motor-starters-pkz-dimensions-002.eps eaton-manual-motor-starters-pkzm-pkzm0-dimensions.eps 121X042121X00210.3 Schutzart von Baugruppen10.4 Luft- und Kriechstrecken10.5 Schutz gegen elektrischen Schlag10.6 Einbau von Betriebsmitteln10.7 Innere Stromkreise und Verbindungen10.8 Anschlüsse für von außen eingeführte Leiter 10.9.2 Betriebsfrequente Spannungsfestigkeit 10.9.3 Stoßspannungsfestigkeit10.9.4 Prüfung von Umhüllungen aus Isolierstoff 10.10 Erwärmung10.11 Kurzschlussfestigkeit10.12 Elektromagnetische Verträglichkeit10.13 Mechanische Funktion Declarations of conformity eCAD model Installationsanleitung Installationsvideos KatalogemCAD model ZeichnungenEaton Konzern plc Eaton-Haus30 Pembroke-Straße Dublin 4, Irland © 2023 Eaton. Alle Rechte vorbehalten. Eaton ist eine eingetrageneMarke.Alle anderen Warenzeichen sindEigentum ihrer jeweiligenBesitzer./socialmedia。

AME50461ZHB中文资料

08/13/04 1EMI FILTERHYBRID / HIGH RELIABILITYAME270461 SERIESDescriptionn Up to 1.5 Ampere Output Current n Attenuation > 35dB @ 200 KHzn Low Profile (0.38”) Seam Welded Package n Ceramic Feedthru Copper-Core Pins n Operation Over Full Military Temp. Range nStandard Military Drawings AvailableFeaturesAMETypical Connection DiagramThe AME Series of EMI filters have been designed to provide full compliance with the input line reflected ripple current requirement specified by CE03 of MIL-STD-461C over the full military temperature range while operating in conjunction with the corresponding AFL series of DC/DC converters. These filters are offered as part of a complete family of conversion products providing single and dual output voltages while operating from nominal +270 input line voltage. Other converters operating with a similar switching frequency will also benefit by use of this device.These EMI filters are hermetically packaged in two enclosure variations, utilizing copper-core pins to minimize resistive DC losses. Three lead styles are available, each fabricated with Advanced Analog’s rugged ceramic lead-to-package seal assuring long term hermetic seal integrity in harsh environments.Manufactured in a facility fully qualified to MIL-PRF-38534, these converters are available in four screening grades to satisfy a wide range of applications. The CH grade is fully compliant to the requirements of MIL-PRF-38534 for class H. The HB grade is fully processed and screened to the class H requirement, but does not include element evaluation to the class H requirement.Both grades are tested to meet the complete group “A” test specification over the full military temperature range with no derating. Two grades with more limited screening are also available for use in less demanding applications. Variations in electrical, mechanical and screen requirements can be accommodated. Contact IR Sant Clara for special requirements.of Filter Rated Output CurrentR LR LPD-94596AAME270461 SeriesSpecificationsABSOLUTE MAXIMUM RATINGS Note 1Input Voltage -720V to +720V Note 2 Input Current3.0 ALead Soldering Temperature 300°C for 10 seconds Case TemperatureOperating -55°C to +125°C Storage -65°C to +135°CElectrical Characteristics -55°C ≤ T CASE ≤ +125°C, -270 ≤ V IN ≤ +270 unless otherwise specified1. Operation above maximum ratings may cause permanent damage to the device. Operation at maximum ratings may degrade performance and affect reliability.2. Device can tolerate ± 720 Volt transient whose duration is ≤ 100 ms when R S ≥ 0.5 Ω.3. Derate Output Current linearly from 100% at 125°C to 0 at 135°C.4.DC resistance is the total resistance of the device and includes the sum of the input to output resistance and the return in to return out resistance paths.Notes to SpecificationsParameterGroup A SubgroupsTest ConditionsMin NomMaxUnitINPUT VOLTAGESteady State Transient Note 2-400 -720+400 +720V DCOUTPUT VOLTAGE 1, 2, 3 V OUT = V IN - I IN x R DCV DC OUTPUT CURRENT Note 31.5A DCDC RESISTANCE (R DC ) Note 4 1T C = 25°C T C = 125°C400 700m ΩPOWER DISSIPATIONMaximum Load CurrentT C = 25°CT C = 125°C0.9 1.58 WNOISE REDUCTION200 KHz - 500 KHz 500 KHz -1 MHz 1 MHz - 50 MHz35 60 65dBISOLATION 1 Any Pin to Case Tested @ 500VDC 100 M ΩCAPACITANCE Measured Between Any Pin and Case 40 nF DEVICE WEIGHTSlight Variations with Case Style95g3AME270461 SeriesAME270461 Block DiagramRefer to last page for Pin DesignationOutputOutput ReturnInputInput ReturnCircuit Operation and Application InformationThe AME series of filters employ three stages of filtering in a low pass configuration designed to attenuate the higher frequency components of ripple currents generated by high frequency switching DC/DC converters. The Block Diagram describes the general arrangement of the principal elements which have been connected to provide both differential and normal mode buffering between the input and output terminals.Employing only passive elements, AME filter operation is initiated simply by insertion into the input power path between one or more DC/DC converters and their input DC voltage bus. In this connection,output pins of the filter will be connected to input pins of the converters. When a single AME filter is used in conjunction with multiple DC/DC converters,the use will be limited to the maximum output current capability specified in the AME electrical table.1 A typical connection utilizing one filter to drive two converters is illustrated on page 1.1To calculate the input current (i in ) requirement of any one converter, first determine the maximum output power bymultiplying output voltage by maximum load current, divide this power by the efficiency to obtain input power and then divide input power by inputvoltage to obtain the input current (i in ). Note that to obtain worst case input current, you must use maximum load current, minimum efficiency and minimum line voltage in this calculation.AME270461 SeriesRequirement MIL-STD-883 MethodNo Suffix ES SuffixHB SuffixCH Suffix Temperature Range -20 to +85°C-55°C to +125°C -55°C to +125°C-55°C to +125°C Element EvaluationMIL-PRF-38534Internal Visual 2017 Yes Yes YesTemperature Cycle 1010 Cond B Cond C Cond C Constant Acceleration2001500gCond A Cond A Burn-in 1015 48hrs@ 85°C 48hrs@ 125°C 160hrs @ 125°C 160hrs @ 125°C Final Electrical (Group A)MIL-PRF-38534 & Specification25°C 25°C-55, +25, +125°C-55, +25, +125°CSeal, Fine & Gross 1014 Cond A Cond A, C Cond A, C Cond A, CExternal Visual2009Yes Yes YesAvailable Screening Levels and Process Variations for AME270461 SeriesStandard Military DrawingPINVendor CAGE CodeVendor Similar PIN98026-01HUA 52467 AME270461W/CH 98026-01HUC 52467 AME270461W/CH 98026-01HXA 52467 AME270461X/CH 98026-01HXC 52467 AME270461X/CH 98026-01HYA 52467 AME270461Y/CH 98026-01HYC 52467 AME270461Y/CH 98026-01HZA 52467 AME270461Z/CH 98026-01HZC 52467 AME270461Z/CHAvailable Standard Military Drawing (SMD) Cross Reference*Per Commercial Standards5AME270461 SeriesAME270461 Case Style OutlinesTolerances, unless otherwise specified: .XX = ±0.010.XXX = ±0.005AME270461 SeriesPin DesignationPin No.Designation1 Positive Input2 Positive Input3 Positive Input4 Input Return5 Input Return6 Input Return7 Output Return8 Output Return9 Output Return 10 Positive Output 11 Positive Output 12 Positive OutputPart NumberingAME 270 461 X / CHModel Input Voltage28 = 28V 50 = 50V 270 = 270VApplicable Military Test StandardCase StyleW, X, Y, ZScreening— , ES, HB, CHWORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 252-7105IR SANTA CLARA: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500Visit us at for sales contact information .Data and specifications subject to change without notice. 08/2004。

阿美特克AMETEK型号

（注册111.44美元）
95155PR 30“ - 0-30磅添加物品到购物车售105.95美元
（注册111.44美元）
95156PR 30“ - 0-60磅添加物品到购物车售105.95美元
（注册111.44美元）
95157PR 30“ - 0-100 PSI 添加物品到购物车售105.95美元
（注册111.44美元）
95134PR 30“ - 0-150 PSI 添加物品到购物车售105.95美元
（注册111.44美元）
95135PR 0-15磅添加物品到购物车售105.95美元
（注册111.44美元）
95136PR 0 - 30磅添加物品到购物车售105.95美元
跨度精度0.25％
15 - 5000 psi的范围和真空
两种款式可供选择：干及面板安装
点击查看大图 - 阿美特克系列6566开锋不锈钢压力表，0-600磅范围点击查看大图 - 阿美特克系列6566开锋不锈钢压力表，0-600磅范围
阿美特克356015所示
产品信息
数据表 1.88 MB
3414P-15
3414P-30
3414P-60
3414P-100
3414P-160
3414P-200
3414P-300
3414P-600
3414P-1000
3414P-2000
3414P-3000
3414P-5000
3415P
3412P-1000
3412P-1500
5954P 液压手动泵套装 200条/ 3,000psi
350条/ 5000磅

亚洲美国有限公司产品说明书：Series 79P 气动阀门驱动器

PneumaticSeries 79P ActuatorInstallation, Operation and Maintenance ManualUSER INFORMATIONTable of Contents Description (3)Air Requirement (3)Installation (4)Type 21 Ball Valves (4)Type 23 Ball Valve (3-way) (4)Type 56 / 57 / 57L Butterfly Valves (4)Type 75 Butterfly Valves (5)Operation (6)Single Acting: (6)Double Acting: (6)Optional Solenoid Valve (See drawing #004PNU) (6)Maintenance (7)Dis-assembly of Actuator (7)Assembly of Actuator (7)Repair Kits (8)Engineering Data (9)Actuators (9)Solenoids (9)Exploded Views (10)A79, B79, & B579 (10)C79, C579, D79, & D579 (11)E79, F79, & G79 (12)Series 79P Pneumatic Actuator IntroductionDescriptionThe Series 79P Pneumatic Actuator is a quarter turn operator, that has two opposed pistons with racks engaging with a single pinion on the actuator shaft. Racks and pinion engage with massive teeth over full length of pinion, resulting in balanced forces with minimal backlash.Pistons and racks are molded polyarilamide for sizes A through D5, and Aluminum Alloy for sizes E through G. Piston guides are Polyacetal for sizes A through D5, and PTFE Bronze for sizes E through G. Pinion gears are Cataphoresis coated Aluminum Alloy. Body and end caps are 316SS, Polyamide glass filled, or cast Aluminum Alloy Cataphoresis and Rilsan coated inside and outside. Actuator shaft is Stainless Steel (Series 300) for sizes A through D, and Cataphoresis coated steel for sizes D5 through G. O-Rings are self-Lubricating BUNA-N. Air connections are ¼” FNPT.Air RequirementThe condition and quality of the compressed air supply to an actuator will affect the efficiency and the life of the seals, guides, and actuator in general. We recommend installing a shutoff valve ahead of actuator to allow shutoff of air to allow removal of valve and actuator for maintenence.Clean, instrument quality dry air or gas is recommended for satisfactory operation. Lubricated air is acceptable, but is not necessary as the o-ring material is self-lubricating BUNA-N.If air lubricators are used, the lubricant selected must be compatible with actuator internals!Actuator may be used with liquid as the power source as long as liquid is compatible with actuator internals, and contains no suspended particles.The actuator environment temperature limits are -25°F and 195°F.InstallationType 21 Ball ValvesPosition the valve and the actuator to corresponding positions (either OPEN or CLOSED). The flats on the actuator shaft extension and the indicator knob should indicate valve positionType 21 Ball Valves (See Drawing #0114BV sizes ½” – 2”)Install mounting bracket #3 to actuator #2 using bolts #8 and washers #9. Insert coupling #4 on stem of valve #1 and then bolt valve #1 to mounting bracket #3 using bolts #5, nuts #6, and washers #7.Note: All bolts should be snug and not excessively over tightened. Type 21 Ball Valves (See Drawing #0115BV sizes 2-1/2” - 4")Install mounting bracket #3 to actuator #2 using bolts #8 and washers #9. Insert coupling #4 on stem of valve #1 and then bolt valve #1 to mounting bracket #3 using bolts #5, nuts #6, and washers #7.Note: All bolts should be snug and not excessively over tightened.Type 23 Ball Valve (3-way)Position the valve and the actuator to corresponding positions (either OPEN or CLOSED). The flats on the actuator shaft extension and the indicator knob should indicate valve positionType 23 Ball Valves (3-way): (See Drawing #0139BV, sizes ½” - 4”) Install mounting bracket #3 to actuator #2 using bolts #8 and washers#9. Insert coupling #4 on stem of valve #1 and then bolt valve #1 to mounting bracket #3 using bolts #5, nuts #6, and washers #7.Type 56 / 57 / 57L Butterfly ValvesPosition the valve and the actuator to corresponding positions (either OPEN or CLOSED). The flats on the actuator shaft extension and the indicator knob should indicate valve positionCAUTION: If valve is in line, system must be shut down and have no line pressure before removing throttle plate and retaining washer.Butterfly Valves(Type-57/57L See Drawing # 0204BF57 sizes 1-1/2” – 6”) No specially machined stem or valve body drilling required. Remove handle (remove handle cap and hex head bolt) to expose throttle plate screws. Remove throttle plate and retaining washer to expose existing bolt pattern.Insert coupling #4 into actuator. Mount bracket #3 to actuator with bolts #8 & washers #9 and tighten evenly. Install valve #1 onto mounting bracket and align stem of valve to engage with actuator shaft coupling. (Line scribed on top of stem indicates disc orientation). Install bolts and nuts #5 thru #7 and tighten evenly. Flats on actuator shaft indicate valve position. (Disc Orientation)Butterfly Valves (Type-56 (16” only) See Drawing #0167BF size 16”) Butterfly Valves (Type-57/57L See Drawing #0167BF57 sizes 8” – 14”)No specially machined stem or valve body drilling required. Remove gear operator by removing 4 thru bolts in body of valve to gear operator and lift off. Insert actuator shaft adapter #9 into actuator. Mount bracket #2 to actuator #10 using bolts #7 and washers #8. Install valve #1 to mounting bracket #2 using bolts #3, nuts #6, and washers #4, keeping in mind line scribed in valve stem indicates disc orientation before mounting and by flats on actuator shaft after mounting.Type 75 Butterfly ValvesButterfly Valves (See Drawing #1230 sizes 18” - 24”)No specially machined stem or valve body drilling required. Remove gear operator by removing 4 thru bolts in body of valve to gear operator and lift off. Insert actuator shaft adapter #9 into actuator. Mount bracket #2 to actuator #10 using bolts #7 and washers #8. Install valve #1 to mounting bracket #2 using bolts #3, nuts #6, and washers #4, keeping in mind line scribed in valve stem indicates disc orientation before mounting and by flats on actuator shaft after mounting.CAUTION: If mounted unit is installed other than straight up, the actuator should be supported individually in order to prevent side loading and loosening up of fasteners.OperationSingle and Double Acting:Pressurized air is introduced via the bottom port and displaces two opposed pistons. When the pistons are displaced, they in turn rotate the actuator output shaft counterclockwise, which opens the valve. This action is the same for single acting and double acting actuators.Single Acting:When the pressurized air is removed from the bottom port, the compressed springs located at the opposite side of the pistons relax. As the spring relax, they in turn rotate the actuator output shaft in a clockwise rotation, which closes the valve. Although the term “relax” is used, the springs are NEVER relaxed, and are ALWAYS under tension, so caution must be exercised.Double Acting:When the pressurized air is removed from the bottom port, the unit remains in the same position until pressurized air is applied to the top port (unlike the single acting actuator). When the pressurized air is introduced to the top port, it is channeled to the opposite side of the pistons, driving them to their original position, which in turn rotates the actuator output shaft in a clockwise direction, closing the valve.Optional Solenoid Valve (See drawing #004PNU)An optional solenoid valve (ASCO 8401 NAMUR mount) can be supplied mounted directly to the actuator. The cycling is accomplished by energizing the solenoid coil for one valve position (typically open), and de-energizing for the opposite valve position (typically closed). The unit is electrically fail safe; so it will return to its de-energized position on electrical failure, provided the air supply is not interrupted.The 8401 solenoid is equipped with speed controls, a manual override, and 18 inch long #18 AWG lead wire.The speed controls are needle valves that will reduce the C V value or increase the cycle time by creating back pressure within the actuator. Speed control adjustments are independent for the opening and closing strokes.Caution: If speed control adjustments are screwed in too far, actuator can not exhaust properly and will not cycle!!The manual override is engaged by pressing and rotating the red slotted screw clockwise 90 for the open position. Once the valve is open, simply rotate the red screw counter-clockwise 90 for the closed position.Caution: Manual override will not work without air supply!!MaintenanceThe Series 79P double rack and pinion actuators do not need anypreventative maintenance.Periodic checks should be performed to ensure proper tightness of allfasteners.Caution: Isolate actuator from electrical power supply and compressedair supply before any maintenance is performed. Make sure both sides ofpistons have been bled off.Dis-assembly of Actuator 1.Place actuator in press and compress actuator. 2.When pressure is on end cap remove snap ring from groove. 3.Slowly release press, allowing springs to fully extend. 4.Remove end cap and springs 5.Repeat steps 1 through 4 for opposite end cap 6.Rotate shaft counter-clockwise to remove pistons. 7.Remove snap ring from shaft. 8.Slide shaft through actuator body and out the bottom. Assembly of Actuator 1.Install shaft, washer, and secure with snap ring; making sure that the snap ring is seated 2.With the air inlet ports facing you, install pistons into actuator body with the rack of the right piston facing the air inlet ports. 3. Rotate shaft CCW (beyond open position) to engage both racks. Next,rotate shaft CW to pull pistons to the closed fully position (actuatorshaft should not be cocked, and there should be equal distancebetween the actuator body and the pistons).4. Install desired number of springs and end cap to actuator body.5. Compress springs with machine press6. When end cap is in place, install snap ring; making sure that the snapring is seated7. Slowly remove pressure from press to insure proper seating of endcap.8.Repeat steps 4 through 8 for other end. CAUTION --- DANGER Failure to use proper tools can result in SERIOUS INJURY! The actuator springs are very strong and are compressed when actuator is assembled. A machine press (not a vise), customfixture, and proper tools are required to disassemble actuator.Repair KitsNOTE: When ordering replacement actuator parts and/or options specifymodel # and voltage.Actuator Model Part Number Actuator Model Part NumberD79P 2398020 A79P 2398001D579P 2398025 B79P 2398000B579P 2398005 E79P 2398030F79P 2398040 C79P 2398010C579P 2398015 G79P 2398050 Each repair kit includes the following (Please reference exploded views)NumberDescription Item1 set of piston o-rings 111 set of piston guides 91 set of guide rings 101 set of end cap o-rings 31 set of upper shaft o-rings 121 set of lower shaft o-rings 131 shaft washer 61 shaft snap ring 7Engineering DataActuatorsSolenoidsAll solenoid coils may be used at +10% to -10% of rated voltages. Coils are 50/60 Hertz and are rated for continuous duty if operated at 60 Hertz.Note: Consult factory for non-standard voltages and for continuous duty at 50 Hertz.Rated Voltage In Rush Current Milliamp @ 60 Hz Holding Current Milliamp @ 60 Hz Watts @ RatedVoltages120 VAC113 71 6.2 24 VAC566 360 6.2 240 VAC56 35 6.2 12 VDC --- 583 724 VDC --- 292 7Solenoids are furnished with 18 inch long #18 AWG lead wire.Attachments: 8 drawings: 0114BV, 0115BV, 0139BV, 0167BF, 0167BF57, 0204BF57 1230, 0004PNU.AIR CONSUMPTION (CUBIC INCHES) Air to Air Air to Spring Model No. Open Port A Close Port B Air Stroke A79P 4.58 3.05 4.58 B79P 9.15 6.1 9.15 B579P 17 15.25 17 C79P 21.35 19.52 21.35 C579P 39.66 33.56 39.66 D79P 48.82 42.72 48.82 D579P 91.54 79.33 91.54 E79P 125.1 115.95 125.1 F79P 323.43 219 323.43 G79P 640.75 427.17 640.75 CYCLE TIME (SECONDS PER STROKE) Air to Air Air to Spring Model No.Open Port A Close Port B Open Port A Close Port B A79P 0.100.10 0.15 0.30 B79P 0.150.15 0.20 0.40 B579P 0.200.20 0.40 0.80 C79P 0.250.25 0.60 1.10 C579P 0.300.30 1.00 1.50 D79P 0.400.40 1.70 2.00 D579P 0.500.50 2.70 3.90 E79P 0.600.60 3.80 5.50 F79P 1.20 1.20 5.80 12.00G79P 2.00 2.00 18.20 19.00NOTE: Actuator supplied with 80 psi, and l d。

和谐XPS安全自动化产品数据表说明书

Product data sheetSpecificationsEstop or guard ,Harmony XPS,connected to supply terminals 24 V AC/DC , no inputs, screwXPSBAC14APMainRange of ProductHarmony Safety Automation Product or Component Type Safety module Safety module name XPSBACSafety module application For emergency stop and protective guard applications Function of module Emergency stop button with 2 NC contacts Guard monitoring with 1 or 2 limit switchesSafety levelCan reach PL e/category 4 for normally open relay contact ISO 13849-1Can reach SILCL 3 for normally open relay contact IEC 62061Can reach SIL 3 for normally open relay contact IEC 61508Can reach PL c/category 1 for normally closed relay contact ISO 13849-1Can reach SILCL 1 for normally closed relay contact IEC 62061Can reach SIL 1 for normally closed relay contact IEC 61508Safety reliability dataMTTFd > 30 years for normally open relay contact ISO 13849-1Dcavg >= 99 % for normally open relay contact ISO 13849-1PFHd = 0.95E-09 for normally open relay contact ISO 13849-1HFT = 1 for normally open relay contact IEC 62061PFHd = 0.95E-09 for normally open relay contact IEC 62061SFF > 99% for normally open relay contact IEC 62061HFT = 1 for normally open relay contact IEC 61508-1PFHd = 0.95E-09 for normally open relay contact IEC 61508-1SFF > 99% for normally open relay contact IEC 61508-1Type = B for normally open relay contact IEC 61508-1MTTFd > 30 years for normally closed relay contact ISO 13849-1DC > 60 % for normally closed relay contact ISO 13849-1PFHd = 0.95E-09 for normally closed relay contact ISO 13849-1HFT=0 for normally closed relay contact IEC 62061PFHd = 0.95E-09 for normally closed relay contact IEC 62061SFF > 60% for normally closed relay contact IEC 62061HFT=0 for normally closed relay contact IEC 61508-1PFHd = 0.95E-09 for normally closed relay contact IEC 61508-1SFF > 60% for normally closed relay contact IEC 61508-1Type = B for normally closed relay contact IEC 61508-1Electrical circuit type NC pairConnections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleRemovable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductor Removable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductorRemovable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel Removable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel [Us] Rated Supply Voltage24 V AC - 15...10 %24 V DC - 20...20 %ComplementarySynchronisation time between inputs UnlimitedType of startAutomatic/manual/monitoredD i s c l a i m e r : T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n sPower consumption in W 1.5 W 24 V DCPower consumption in VA 3.5 VA 24 V AC 50/60 HzInput protection type Internal, electronicSafety outputs 4 NO + 1 NCSafety inputs0Input compatibility Normally closed circuit ISO 14119XC limit switch ISO 14119Mechanical contact ISO 14119Normally closed circuit ISO 13850Input terminal Power supply[Ie] rated operational current5 A AC-13 A AC-155 A DC-13 A DC-133 A AC-11 A AC-153 A DC-11 A DC-13Control outputs0[Ith] conventional free air6 Athermal currentAssociated fuse rating10 A gG NO relay output circuit IEC 60947-1 Minimum output current10 mA relay outputMinimum output voltage5 V relay outputResponse time150 ms at 24 V AC80 ms at 24 V DC[Ui] rated insulation voltage300 V 2)EN/IEC 60947-1[Uimp] rated impulse withstand4 kV II EN/IEC 60947-1voltageLocal signalling LED green power power ONLED red error errorLED yellow state statusLED yellow start1 start inputLED yellow start2 start inputMounting Support35 mm symmetrical DIN railDepth 4.72 in (120 mm)Height 3.94 in (100 mm)Width0.89 in (22.5 mm)Net Weight0.44 lb(US) (0.200 kg) EnvironmentAmbient Air Temperature for-13…131 °F (-25…55 °C)OperationStandards IEC 60947-5-1IEC 61508-1 functional safety standardIEC 61508-2 functional safety standardIEC 61508-3 functional safety standardIEC 61508-4 functional safety standardIEC 61508-5 functional safety standardIEC 61508-6 functional safety standardIEC 61508-7 functional safety standardISO 13849-1 functional safety standardIEC 62061 functional safety standardProduct certiﬁcations TÜVcULusIP degree of protection IP20 terminals)EN/IEC 60529IP40 housing)EN/IEC 60529IP54 mounting area)EN/IEC 60529 Relative Humidity5…95 % non-condensingOrdering and shipping detailsCategory22477-SAFETY MODULES (PREVENTA)Discount Schedule SAF2GTIN3606482034013Nbr. of units in pkg.1Package weight(Lbs)10.76 oz (305 g)Returnability YesPacking UnitsUnit Type of Package 1PCEPackage 1 Height 2.52 in (6.4 cm)Package 1 width 5.24 in (13.3 cm)Package 1 Length 6.02 in (15.3 cm)Unit Type of Package 2S03Number of Units in Package 216Package 2 Weight12.01 lb(US) (5.448 kg)Package 2 Height11.81 in (30 cm)Package 2 width11.81 in (30 cm)Package 2 Length15.75 in (40 cm)Package 3 Height11.81 in (30 cm)Oﬀer SustainabilitySustainable oﬀer status Green Premium productCalifornia proposition 65WARNING: This product can expose you to chemicals including: Lead and lead compounds, which isknown to the State of California to cause cancer and birth defects or other reproductive harm. For moreinformation go to REACh Regulation REACh DeclarationEU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)EU RoHS DeclarationMercury free YesRoHS exemption information YesChina RoHS Regulation China RoHS declarationEnvironmental Disclosure Product Environmental ProfileCircularity Proﬁle End of Life InformationWEEE The product must be disposed on European Union markets following specific waste collection andnever end up in rubbish bins.Dimensions Drawings DimensionsFront and Side Views(A) : Product drawing(B) : Screw clamp terminal(C) : Side view(1) : Removable terminal blocks, top(2) : Removable terminal blocks, bottom(3) : LED indicators(4) : Sealable transparent coverMounting to DIN railScrew-mountingConnections and SchemaWiring Diagram(1) : A1-A2 (Power supply)(2) : Y1 (Control output of Start/Restart input), Y2 (Input channel for automatic/manual start/restart), Y3 (Input channel for monitored start/restart with falling edge)13-14-23-24-33-34-43-44-51/61-52-62 : Terminals of the safety-related outputs。