FMC product list
【机械专业英文文献】柔性制造系统
The flexible manufacturing system The flexible manufacturing system(FMS) train points to have the high manufacturing system of the automation degree.The FMS speak about usually means in the lot size, batch size machining of metals currently with the forerunner's automation and Gao level of flexible is the manufacturing system of target.Along with society to product diversification, the low manufacturing cost and short manufacturing period's etc.'s need be gradually urgent, the FMS deveolps very and quickly, and because of micro-electronics technique, calculator technique, correspondence technique, machinery and the development of controlgear, also urge flexible manufacturing technique day attain mature, in 80's after, the manufacturing industry automation gets into for a brand-new ages, namely according to calculator of integrated manufacturing(CIMS) ages, the FMS has become the national machinery manufacturing of each industrialization to automate of develop and deveolp point.A, scalePress the scale all of the FMSs can be is divided into as follows 4 types:1.Flexible Manufacturing Cellular(FMC)The FMC publish and use to invite ratio FMS night in the manufacturing for 6~8 years, it is processed a centre, industrial robot by 1~2 and counts to control engine bed and material carrying to save to store equipments composing and have an adaptation to process have another species product of vivid.The FMC can be regarded as a FMS with minimum scale, is a FMS to cheap turn and small scaled turn direction development and a kind of outcome, its characteristics is to carry out single machine flexible turn and automate, have already get into up to the present universal application step.2.Flexible Manufacturing System(FMS)Usually include 4 or more full-automatic numbers to control engine bed(process centre and truning centre etc.), from concentrate the handling system of control system and material to connect, can under the sistuation that not shut down realization have another species, in process of small lot size, batch size and manage.3.Flexible Manufacturing Line(FML)It is be placed in the quantisty not- flexible and automatic line of single orlittle species large quantity with medium small lot size, batch size have another of species FMS of manufacturing line.It processes an equipments and can be an in general use earth, ground to process a centre, CNC engine bed;May also adopt definite purpose engine bed or NC definite purpose engine bed, have low request at the FMS to the system flexible earth, ground of the material handling, but the rate of manufacturing be higher.It with the long-lost type produce medium flexible manufacturing system with connect the control system(DCS) of the dispersion type within manufacturing line is representative, its characteristics is to carry out manufacturing line flexible turn and automate, its technique already the day attain mature, have already got into application to turn step up to the present.4.Flexible Manufacturing Factory(FMF)The FMF connects several FMSs, go together with to automate stereoscopic storehouse, use the progress contact of the calculator system, adoption from order, design, process, assemble, examine, deliver to hair goods of complete FMS.It included CAD/CAM, and make calculator integrated to make system(CIMS) devotion physically, realization manufacturing the system be flexible to turn and automate and then carry out whole plant the manufacturing control, product of the scope to process and the material store completely turn of the luck progress.The FMF is the tallest level that the automation produce and the reflection is most born the top of the boundary the forerunner's automation application a technique.It is manufacturing, product development and management the automation of management connect into one whole, with information stream control substance stream of intelligence manufacturing system(IMS) is representative, its characteristics is to carry out works flexible turn and automate.Two, key techniqueputer Aided Design, CADThe CAD technique development will lead into the expert system in the future, make it have intelligence to turn, can treat various complicated question.At present design a latest of the technique breakthrough is that the light is quick stereoscopic forming technique, that the new technique be directly to make use of CAD data and pass a computer control of laser scanning system, be divided into some lamellas:3Dnumerical pattern a two-dimensional flake form sketch, and press the two-dimensional flake form sketch to carry on an optics scanning to the quick resin liquid surface of the light in the bath, is scan of the liquid surface then becomes curing plastics, thus circularly operate, pursue lamella to scan to take shape, and of oneself glue the each flake form curing plastics that the delamination take shape to match together and only need certain data, then can make a prototype of precision in few hours.It contributes to quickly developping new product and developping the speed of new structure.2.Fuzzy control techniqueThe actual application of misty mathematics is a fuzzy control machine.The high performance fuzzy control apparatus which develops recently has from the study function, can in the process of control in continuously obtain a new information and of oneself make an adjustment to the control quantisty, make system function greatly in order to improve, among them particularly with according to artificial neural net, artificial neural network, ANN of self-educated method cause people tremendous concern more.3.Artificial intelligence, expert system and intelligence transducer techniqueUp to the present, the artificial intelligence adopt mostly points according to the expert system of rule in the FMS.The expert system makes use of expert knowledge and reasons logically rule progress a reasoning and solve each kind of question.(like explanation, predict, diagnose, check to seek a fault, failure, design, plan, keep watch on, repair, command and control etc.)Because expert system can simplely the theory of various fact and experience certificate super - with pass the knowledge of experience acquisition to combine together, as a result the expert system intensified for the FMS various aspect operate gentle.Prospect a future, with knowledge intensively is characteristic, with the knowledge treat for the artificial intelligence(include expert system) technique of way necessarily will have in the FMS(particularly intelligence type) decisive action.The artificial intelligence is in the future FMS lieutenant general exertive gradually important ed for various technique in the FMS currently, anticipate to there is the artificial intelligence of the is still of development prospect most .Anticipate till the beginning of 21 centuries, the artificial intelligence is in the FMS of applied scale will compare currently greatly400%.The intelligence manufacturing technique(IMT) aim is in the process of integrating the artificial intelligence into the manufacturing each link, ask for help of intelligence of imitate the expert movable, replace or extend a manufacturing environment parts of mental works of the middleman.In the process of make, the system can automatically monitor it to circulate condition, while be subjected to the external world or inner excitation energy the automatic regulation its parameter with attain the best operating state, have self-organization ability.The past IMT is called make of the coming 21 centurieses technique.To the future intelligence turn 1 that the FMS has important meaning is an intelligence transducer in the realm of rapid development now technique.The item's technique accompanies with the technique of calculator application and artificial intelligence but creation and it makes the transducer have inside"decision" function.4.Artificial neural net, artificial neural network, ANN techniqueThe artificial neural net, artificial neural network, ANN(ANN) is a kind of method that the neural net, neural network which imitates intelligence living creature proceeds together to treat to the information progress.The past artificial neural net, artificial neural network, ANN is also a kind of artificial intelligence tool.At the automatic control realm, the neural net, neural network soon will be be juxtaposed in expert system and fuzzy control system and become a modern from pay to turn a composition division in the system.Three, deveolp trendThe 1. FMCs will become the popular technique which deveolps and applieds This is because the FMC investment is much less than the FMS but the economic performance connect near, be applicable to the financial power limited medium small scaled business enterprise more.Numerous foreign plant house lists as FMC to deveolp currently of heavy.2.Deveolp the efficiency higher FMLHave another species large quantity the manufacturing business enterprise of the quantisty such as workses such as autocar and tractor etc. to FML of the need caused biggest pay attention to of the FMS manufactery.Adopt the price cheap definite purpose number controls engine bed to act for a process of general purpose acentre and will be a FML development trend.3.The dynasty multi-function direction deveolpFrom the simplicity process the type FMS develops further to weld, assemble, inspection and Ban material process is to manufacturing work prefaces, such as Zhu and Duan...etc. and have of various function FMSs. The FMS is a realization future novel concept mode and new development trend of the works, decide to make raise of the strategic meaning of the have of prospect of the business enterprise future development Cuo.The FMS which reflects the works whole level currently is number generation FMS, in 90's this kind condition still will keep on next go to, Japan comes into force from 1991 of"intelligence manufacturing system"(IMS) be international to develop item and belong to the next generation FMS;But real perfect next generation FMS's anticipate would carry out to 21 centuries.Then, the intelligence turns machinery and the person's and will blend mutually and gentlely moderates completely from accept order goods to produce, sale this business enterprise produce the full activity of management.Since the mid 80's, the FMS acquisition fast fierce development, almost became manufacturing automation of hot spot.On the other hand is because the single-item technique,such as NC, processes the development of centre, industrial robot, CAD/CAM, resources management and high technique etc. and provided to can be provided to integrate a technique foundation of whole system;On the other hand, the world market took place a graveness change, from past tradition, opposite stabilization of market, the development much changes into the dynamic state of the market , for begging existence and begging a development from the market, raise a business enterprise to the market demanding strain ability and people start investigate new manufacturing method and business model.In recent years, FMS conduct and actions a kind of science"philosophy" and works which modernizes industrial manufacturing automate of advanced mode already for the country the top of the border generally accepted, can think so:The FMS is automate a technique, information technology and makes technical foundation, former business enterprise in mutually independent engineering design, produce manufacturing and conduct a management etc. process, constitute a complete but organic system which overlays the wholebusiness enterprise to carry out an overall situation dynamic state under the prop up of the calculator and its software superior turn, population efficiently benefit, Gao gentle, and then win the manufacturing system of the intelligence that the competition complete victory.FMS conduct and actions nowadays world manufacturing automation technique deveolp of ex- follow science and technology, for future the mechanism manufacturing provided one arm grandiosity of blueprint, will become for 21 centuries, the mechanism is manufactural main produce mode.。
副本通用简称翻译表
Definition
Deliver Mule Physical Requirements Design Quality Document of Srategic Intent Design Theme Alternatives Earnings Before Interest and Taxes Engineering End of Line Test Enhancement Release Engineering Sign Off et cetera Export Workplan Initiation Exterior Final Approval To Grain First Integration Vehicle Completed First Mule Complete First Product and Process Validation First Product and Process Validation General Assembly Global Architecture Development Team Global Bill of Material Global Process Leadership Board Global Functional Leader Global Product Development Committee Global Purchasing and Supply Chain Global Segment Director Global Status and Timing System Global Vehicle Chief Engineer Global Vehicle Development Process Global Vehicle Line Executive Global Vehicle Program Management Harness Verification Frame Interior Clinic Initial Data Release Integration Interior Integration Vehicle Integration Vehicle Build Integration Vehicle Build Release Integration Vehicle Engineering Release Integration Vehicle Readiness
整车研发英语缩写释义
Acronym ExplanationAA Architecture ApprovalABIW Advanced Body in WhiteABIW DA Advanced Body in White Data AvailableAC Architecture ConfirmationACM Aggregate Contribution MarginAD Alternatives DevelopmentAFI Architecture Framing InitiationARC Architecture Refinement CompleteASSI Architecture Statement of Strategic IntentCal CalibrationCPC Critical Product CharacteristicCSO Contract Sign OffCTD Concept Technical DescriptorCVER Concept Vehicle Engineering ReleaseDIVPR Deliver Integration Physical Build Requirements from Program LADV PlanDMPR Deliver Mule Physical Build Requirements from ProgramLADV PlanDSI Document of Strategic IntentDSO Design Sign OffDTA Design Theme AlternativesEOLT End of Line TestFATG Final Approval to GrainFIVC First Integration Vehicle CompleteFMC First Mule CompleteFPPVC First Product & Process Validation VehicleGME General Motors EuropeGMNA General Motors North AmericaGMPT General Motors PowertrainGPDP Global Powertrain Development ProcessGPDS Global Part Description SystemGPSC Global Purchasing & Supply ChainGSTS Global Status & Timing SystemVDP Global Vehicle Development ProcessIDR Initial Data ReleaseIV Integration VehicleIVBR Integration Vehicle Build ReleaseIVER Integration Vehicle Engineering ReleaseLADV Learning Analysis/Development/ValidationLLIVER Long Lead Integration Vehicle Engineering ReleaseLTR Launch Team ReleaseMCB Manufacturing Confirmation BuildMMR Manufacturable Math ReleaseMVBns Manufacturing Validation Build Non SaleableMVBs Manufacturing Validation Build SaleableMVR Marketing Validation ReviewPDT Product Development TeamPed Pro Pedestrian ProtectionPET Program Execution TeamPFI Program Framing InitiationPLB Process Leadership BoardPPAP Production Part Approval ProcessPPO Pre Production OperationsPRTS Problem Resolution & Tracking SystemPT PowertrainRPR Rapid Problem ResolutionSF Styling FreezeSORP Start of Regular ProductionSSM Subsystem MuleSTD Single Theme DirectionSVER Structure Vehicle Engineering ReleaseV*VA Virtual * Vehicle AssessmentA – Architecture / C – Concept / DSO – Design Sign Off /I – Integration / Ini – Initial / P – PVV / S – Structure) VDBOR Vehicle Development Buy-off RideVDC Vehicle Documentation CompleteVDR Verified Data ReleaseVDS Vehicle Description SummaryVPI Vehicle Program InitiationVTC Validation Testing CompleteVTS Vehicle Technical SpecificationVVD Virtual Validation DevelopmentTranslation构架批准先期白车身先期白车身数据完成构架确认合计边际贡献选择性开发构架框架启动结构完善战略意图的构架状态标定/校准关键产品特性合同签署概念技术说明概念车工程发布从项目LADV计划中交付制造整合需求从项目LADV计划中交付骡车制造需求战略立项建议书设计签署设计主题选择生产线终端测试皮纹最终审批首辆集成车完成首轮骡车完成第一轮产品及工艺验证车辆欧洲通用汽车北美通用汽车通用汽车动力系统全球动力系统开发流程全球零部件描述系统全球采购与供应链全球状态与计时系统整车开发流程初始数据发布集成车集成车制造发布集成车工程发布学习分析/开发/验证长周期集成车工程发布投产小组发布制造确认不可售制造验证可售制造验证市场验证评审产品开发组行人保护项目执行组项目框架启动生产件批准程序问题解决和跟踪系统动力系统快速问题解决造型冻结正常生产启动子系统单一主题方向结构车工程发布虚拟概念车辆评估A-构架/C-概念/DSO-设计签发/ I-集成/Ini-启动/P-PVV/S-结构车辆资料文件完成核实的数据发布汽车描述概要汽车项目启动验证测试完成车辆技术规范虚拟验证开发。
外贸常见英文缩略词
外贸常见英文缩略词1 C&F(cost&freight)成本加运费价2 T/T(telegraphic transfer)电汇3 D/P(document against payment)付款交单4 D/A (document against acceptance)承兑交单5 C.O (certificate of origin)一般原产地证6 G.S.P.(generalized system of preferences)普惠制7 CTN/CTNS(carton/cartons)纸箱8 PCE/PCS(piece/pieces)只、个、支等9 DL/DLS(dollar/dollars)美元10 DOZ/DZ(dozen)一打11 PKG(package)一包，一捆，一扎，一件等12 WT(weight)重量13 G.W.(gross weight)毛重14 N.W.(net weight)净重15 C/D (customs declaration)报关单16 EA(each)每个，各17 W (with)具有18 w/o(without)没有19 FAC(facsimile)传真20 IMP(import)进口21 EXP（export）出口22 MAX (maximum)最大的、最大限度的23 MIN (minimum)最小的，最低限度24 M 或MED (medium)中等，中级的25 M/V（merchant vessel）商船26 S.S(steamship)船运27 MT或M/T(metric ton)公吨28 DOC (document)文件、单据29 INT（international）国际的30 P/L (packing list)装箱单、明细表31 INV (invoice)发票32 PCT (percent)百分比33 REF （reference）参考、查价34 EMS （express mail special）特快传递35 STL.(style)式样、款式、类型36 T或LTX或TX(telex)电传37 RMB（renminbi）人民币38 S/M （shipping marks）装船标记39 PR或PRC(price) 价格40 PUR (purchase)购买、购货41 S/C（sales contract）销售确认书42 L/C （letter of credit）信用证43 B/L （bill of lading）提单44 FOB （free on board）离岸价45 CIF（cost,insurance&freight）成本、保险加运费价海运业务常用缩略语A/W 全水路All WaterANER 亚洲北美东行运费协定Asia NorthAmericaEastboundRateB/L 海运提单Bill of LadingB/R 买价Buying RateBAF 燃油附加费BunkerAdjustmentFactorC&F 成本加海运费COST ANDFREIGHTC.C 运费到付CollectC.S.C 货柜服务费ContainerService ChargeC.Y. 货柜场Container YardC/(CNEE) 收货人ConsigneeC/O 产地证Certificate ofOriginCAF 货币汇率附加费CurrencyAdjustment FactorCFS 散货仓库Container FreightStationCFS/CFS 散装交货（起点/终点）CHB 报关行Customs HouseBrokerCIF 成本，保险加海运费COST，INSURANCE，FRIGHTCIP 运费、保险费付至目的地Carriage and Insurance Paid ToCOMM 商品CommodityCPT 运费付至目的地CarriagePaid ToCTNR 柜子ContainerCY/CY 整柜交货（起点/终点）D/A 承兑交单DocumentAgainst AcceptanceD/O 到港通知Delivery OrderD/P 付款交单Document AgainstPaymentDAF 边境交货Delivered AtFrontierDDC 目的港码头费DestinationDelivery ChargeDDP 完税后交货Delivered DutyPaidDDU 未完税交货Delivered DutyUnpaidDEQ 目的港码头交货DeliveredEx QuayDES 目的港船上交货DeliveredEx ShipDoc# 文件号码DocumentNumberEPS 设备位置附加费EquipmentPosition SurchargesEx 工厂交货Work/ExFactoryF/F 货运代理FreightForwarderFAF 燃料附加费FuelAdjustmentFactorFAK 各种货品Freight All KindFAS 装运港船边交货FreeAlongside ShipFCA 货交承运人Free CarrierFCL 整柜Full Container LoadFeeder Vessel/Lighter 驳船航次FEU 40‘柜型Forty-FootEquivalent Unit 40’FMC 联邦海事委员会FederalMaritime CommissionFOB 船上交货Free On BoardGRI 全面涨价GeneralRateIncreaseH/C 代理费Handling ChargeHBL 子提单House B/LI/S 内销售Inside SalesIA 各别调价IndependentActionL/C 信用证Letter of CreditLand Bridge 陆桥LCL 拼柜Less Than ContainerLoadM/T 尺码吨（即货物收费以尺码计费）Measurement TonMB/L 主提单Master Bill Of LoadingMLB 小陆桥，自一港到另一港口Minni Land BridgeMother Vessel 主线船MTD 多式联运单据Multimodal Transport DocumentN/F 通知人NotifyNVOCC 无船承运人Non Vessel OperatingCommon CarrierO/F 海运费Ocean Freight OBL 海运提单Ocean (or original )B/LOCP 货主自行安排运到内陆点Overland Continental PointOP 操作OperationORC 本地收货费用（广东省收取）Origin Recevie ChargesP.P 预付PrepaidPCS 港口拥挤附加费Port Congestion SurchargePOD 目地港Port Of Destination POL 装运港Port Of Loading PSS 旺季附加费Peak Season SuchargesS/(Shpr) 发货人ShipperS/C 售货合同Sales ContractS/O 装货指示书Shipping Order S/R 卖价Selling RateS/S Spread SheetSC 服务合同Service Contract SSL 船公司Steam Ship Line T.O.C 码头操作费Terminal Operations OptionT.R.C 码头收柜费Terminal Receiving ChargeT/S 转船，转运Trans-ShipT/T 航程Transit TimeTEU 20‘柜型Twenty-Foot Equivalent Unit 20’THC 码头操作费（香港收取) Terminal Handling Charges TTL 总共TotalTVC/ TVR 定期定量合同Time Volume Contract/ Rate VOCC 船公司Vessel Operating Common CarrierW/M 即以重量吨或者尺码吨中从高收费Weight or Measurement ton W/T 重量吨（即货物收费以重量计费) Weight TonYAS 码头附加费YardSurcharges外贸常用英语第一期:General Terms1. establishing business relation-建立业务关系2. inquiry-询盘3. offer-报盘4. counter offer-还盘5. quantity-数量6. packing-包装7. time of shipment-装运期8. price-价格9. discount-折扣10. terms of payment-支付条款11. insurance-保险12. commodity inspection-商品检验13. acceptance-接受14. signing a contract-签订合同15. claim-索赔16. agency-代理17. commission-佣金18. exclusive sales-包销19. joint venture-合资企业20. compensation(compensatory )trade-补偿贸易21. processing and assemblingtrade-加工装配贸易22. the terms of internationaltrade-国际贸易术语第二期:Establishing businessrelation 建立业务关系1. recommendation 推荐、介绍2. inform 通知3. enter into business relations建立业务关系4. catalogue 目录5. for your reference 供您参考6. specific inquiry 具体询价7. promptly 立即8. representative 代表9. chamber of commerce 商会10. specialize in 专营11. on the bases of equality andmutual benefit 在平等互利的基础上12. pamphlet 小册子13. a range of 一套14. make offers 报价15. import and exportcorporation 进出口公司16. silk 丝绸17. cotton piece goods 棉布18. blouse 女衬衫19. be of the latest style 最新式样20. financial position 财务状况21. trade reputation 贸易声誉22. on display 展出23. woolen knitwear 毛织品24. garment 服装25. meet with great favor 受欢迎26. credit standing 信用地位27. state-operated 国营的28. currency, Chinese currency,British currency 货币，中国货币，英国货币29. investment 投资30. a long-term investment 长期投资31. a profitable investment 有利可得的投资32. a safe and sure investment安全可靠的投资33. a heavy investment 巨额投资34. investment intent 投资意向35. investment partner 投资伙伴36. direct investment 直接投资37. investment environment 投资环境38. investor 投资者39. enterprise 企业40. joint venture enterprise 合资企业41. cooperative enterprise 合作企业42. exclusively foreign-ownedenterprise 外商独资企业43. state-owned enterprise 国营企业44. collectively-owned enterprise 集体企业45. individually owned enterprise 个体企业第三期: inquiry 询盘1. general inquiry 一般询盘2. specific inquiry 具体询盘3. dealer 商人4. quotation 报价5. sales department 销售部6. purchase 购买7. enquiry 询价8. quote 开价9. sample 样品10. a long-term contractt 长期合同11. discount 折扣12. grant 批准13. to make an inquiry for sth 对某物询价14. to keep the inquiry on file 把询价记录在卷15. to inquiry for sth 对某物询价16. to inquiry about sth 询问某事17. process 加工18. guarantee, guarantor 保证, 保证人19. delivery 交货20. port of delivery 交货港21. time of delivery 交货期22. prompt delivery 即期交货23. to effect delivery 办理交货24. to make delivery 办理交货25. to postpone delivery 推迟交货26. to deliver sth to sb 把某物交付给某人27. shipment 装船28. to make shipment 装船29. to receive shipment 接货30. partial shipment 分批装船31. prompt shipment 即期装运32. time of shipment 装运期33. offer 报盘报价34. a firm offer 实盘35. a counter offer 还盘36. to accept an offer 接受报盘37. to extend an offer 延长报盘38. to renew an offer 更新报盘39. to withdraw an offer 撤消报盘40. the validity of an offer 报盘有效期41. to make an offer 报价42. to offer firm 报实盘43. to offer subject to finalconfirmation 报盘以最后确认为准44. specialize in 专门经营第四期:Counter offer 还盘1. counter offer 还盘2. enjoy great popularity 享有盛誉3. ready seller; quick seller;quick-selling product 畅销品4. conclude business with sb. 与某人达成交易5. close business, close a deal ,close a transaction, close abargain 达成交易6. trade terms 贸易条件7. trade agreement 贸易协定8. trade fair 交易会9. trade mark 商标10. foreign trade对外贸易11 trade in sth 经营某物12. trade with sb.与某人交易13. favourable price 优惠价格14. favourable terms 优惠条件15. quotation 行情16. discount quotation 贴现行情17. exchange rate quotation外汇行情18. commission 佣金19. a commission of....%; ....%commission.百分之几佣金20. your ..% commission你的百分之几佣金21. The above price includes yourcommission of 2%.上述价格包括你方2%佣金.22. general practice 惯例23. accept an order 接受订单24. cancel an order 撤消订单25. confirm an order 确认订单26. execute an order 履行订单27. a back order 尚未执行的订单28. a fresh order 新订单29. a repeat order 续订订单第五期:Quantity 数量1. weight重量2. metric ton公吨3. long ton长吨4. short ton短吨5. kilogram, kilo, kg公斤6. pound, lb磅7. ounce, oz盎司8. number个数9. piece件10. pair双11 dozen打12. ream令13. set套14. length长度15. area面积16. volume体积17. cubic meter立方米18. capacity容积19. litre升20. gallon加仑21. bushel蒲式耳22. metric system公制23. british system英制24. U.S.System美制25. gross weight毛重26. net weight净重27. shipping weight装运重量28. landed weight卸货重量29. theoretical weight理论重量第六期: Packing 包装1. packaging 包装方法2. blister packing起泡包装3. neutral packing中性包装4. skin packing吸塑包装5. hanging packing挂式包装6. catch sb's eye引某人注目7. mark唛头8. unlabelled packing无牌的包装9. in bulk散装10. in loose packing散装11 nude packing裸装12. bulk pack整批包装13. consumer pack零售包装14. large packing大包装15. inner packing, external packing, end packing 小包装16. shrunk packaging, 压缩包装17. foam-spary packaging喷泡沫包装18. gift-wrap礼品包装19. bag, sack袋20. jute bag麻袋21. polythelene bag, plastic bag 塑料袋22. polythelene net尼龙绳网袋23. zippered bag拉链袋24. case, chest箱25. box 盒26. wooden case木箱27. carton纸箱28. container集装箱29. rate板条箱30. fibre board case纤维板箱第七期: Packing(二) 包装1. packet 小包2. bale包3. bundle捆4. tin , can罐头5. basket篮，篓，筐6. bamboo basket竹篓7. bottle瓶8. wooden keg小木桶9. hogshead大桶10. iron drum铁桶11 cylinder铁桶12. barrel琵琶桶13. drum圆桶14. waterproof paper防水纸15. cellophone玻璃纸16. kraftpaper牛皮纸17. canvas帆布18. fibreboard纤维板19. nylon strap尼龙腰子20. plastic strap塑料腰子21. adhesive tape胶带22. stuffing material填料23. nylon plastic尼龙丝24. fermented plastic泡沫塑料25. paper scrap纸屑26. saw dust木屑27. tar paper沥青纸28. wax paper蜡纸29. slushing compound润滑油30. tarpaulin油布、防水帆布第八期:Shipment 装运1. backlog积压而未交付的订货2. terms of shipment装运条件3. prepare goods备货4. load装货5. unload卸货6. board木板，板，船舷7. on board在船（或车、飞机）上8. steamer轮船9. space of a steamer舱位10. shipping department运输部门11 liner班轮，班机12. book up（票、车位、舱位等）订完13. tranship转运14. transhipment转载15. Force Majeure人力不可抗力16. European Main Ports --EMPs欧洲主要口岸17. vessel船；飞船；飞机18. the first available vessel第一艘可订到的船19. call at停泊20. duly 按期地，按时的第九期: Price 价格1. Price terms 价格条件2. bargain 讨价还价3. currency 货币4. on the low side 价格偏低5. market price 市场价6. current price 现行价7. floor price 底价8. make a bargain with sb 与某人成交9. drive a hard bargain over sth.为某事拼命讨价还价10. a bargain sale 廉价出售11. rock-bottom price 最低价12. F.O.B 船上交货13. C.I.F. 成本加保险费，运费价14. CFR 成本加运费价Business is closed at this price.交易就按此价敲定。
FMC Professional Solutions 环保催化剂使用指南说明书
Before applying a pesticide (indoors or outdoors), remove children, pets and toys from the area and keep them away until the pesticide has dried.
Always store pesticides away from pets and children's reach, in a locked cabinet or shed. Child-proof safety latches also may be installed on cabinets and can be purchased at local hardware stores and other retail outlets.
Use non-chemical control methods to help reduce pest problems. Around the home, such measures include removing sources of food and water (such as leaky pipes) and destroying pest shelters and breeding sites (such as litter and plant debris).
Never transfer pesticides to other containers that may be associated with food or drink.
FMC-HMI 人机接口外设卡用户指南说明书
1300 Henley CourtPullman, WA 99163509.334.6306 FMC-HMI™ Reference ManualRevised September 19, 2012This manual applies to the FMC-HMI rev. BOverviewThe FPGA Mezzanine Card - Human Machine Interface (FMC-HMI) peripheral board enables developers to add a human interface to field-programmable gate array (FPGA) based systems. The FMC-HMI provides a development platform for customers to utilize image capture, touch digitizer and graphical user interface applications.1 Functional DescriptionThe FMC-HMI captures light with the Aptina MT9D112 digital image sensor. This sensor provides a maximum resolution of 1600x1200 at 15 frames per second. The Aptina has a 10-bit raw color depth, an I2C control bus, and can utilize Bayer, RGB, and YCrCb output formats. This image sensor utilizes an automatic exposure, gain, and white balance with powerful image correction algorithms, image scaling, and a FIFO output.1.1 Aptina MT9D112The Aptina MT9D112 is a small (8.5mm x 8.5mm x 5mm) integrated System-on-Chip (SoC) assembly that includes a 2Mp complementary metal–oxide–semiconductor (CMOS) sensor array, a fixed-focus lens with a 3.81mm equivalent focal length, and an image processor. The sensor assembly comes taped to the board and connects through a 23-pin flexible printed circuit (FPC) cable.The FMC-HMI.•Aptina MT9D112 fixed-focus, 2Mp CMOSdigital image sensor•ADI SSM2603 audio codec with 3.5mmline in, microphone in, line out andheadphone out jacks•Shanghai Tianma TM050RBH01 5”800x480 TFT LCD with integrated 4-wiretouch panel•Male FMC LPC connector for digitalsignals•AMS header for analog signals•12-pin female Pmod header•Piezoelectric buzzer•Compatible with wide range of VADJvoltages (1.8V-3.3V)Features include:Users can control the image processor via a standard two-wire interface. The FMC-HMI transfers image data via an 8-bit pixel bus with additional synchronization signals.Note: Operators that desire more information on the Aptina MT9D112 should consult theAptina Imaging product information sheets at:/products/soc/mt9d112d00stc/Or consult the Digilent Inc. VmodCAM product reference manual at:/Data/Products/VMOD-CAM/VmodCAM_rm.pdf1.2 ADI SSM2603The FMC-HMI features an Analog Devices Inc. SSM2603 Low Power Audio Codec thatprovides simultaneous playback and recording capabilities to and from a variety of sources through standard audio jacks. Users control the audio with a standard two-wire interface and an I²S compatible bus presents the digital audio.Note: For more information on the SSM2603 see ADI datasheets available online at:/en/audiovideo-products/audio-codecs/ssm2603/products/product.html1.3 Shanghai Tianma TM050RBH01The Shanghai Tianma TM050RBH01 has a 5” light emitting diode (LED) backlit thin film transistor-liquid crystal display (TFT-LCD) assembly that integrates a resistive touch panel covering the whole active display area.The TFT-LCD assembly arrives taped to the printed circuit board (PCB) and connects through a 45-pin FPC connector. The FPC cable carries both the digital display interface and analog touch panel signals.The display interface is a straight-forward 24-bit RGB pixel bus. The support circuitry on-board the FMC-HMI provides backlight intensity control with pulse width modulation.The four analog signals, X+, X-, Y+, Y- comprise the X and Y plate electrodes. To determine the touch coordinates, users must bias the plates and measure the resistive divider formed by the electrically charged resistive plates using an analog-to-digital converter (ADC) count. When operators use the Shanghai Tianma with system boards that have XADC support, they can use the AMS header to digitalize the analog touch panel signals. An on-board analog multiplexer (MUX) switch helps users select the correct panel electrodes for measurement.Note: For more information on the TM050RBH01 consult the product details for the VmodTFT - Color LCD Touch Screen available online at:/Products/Detail.cfm?NavPath=2,648,979&Prod=VMOD-TFT1.4 FMC SupportThe FMC-HMI uses a Samtec ASP-134604-01 low pin-count male connector as the main connector for digital signals. Everything except for the PCB dimension requirements conforms to the VITA 57.1 specs. The connector supports the full range of 1.8V-3.3V bank supply voltages (VADJ).1.5 AMS HeaderThe AMS header is there to provide support for the XADC feature of seven-series system boards. Operators can use the AMS header signals to bias the touch panel by selecting the analog MUX inputs and carrying the differential analog signal to the FPGA pins for measurement.1.6 12-pin Pmod HeaderA female double Pmod connector offers users the option to connect various Pmods to the system board. Operators can utilize the ADG3308 auto-sensing bidirectional level translator to level shift from 3.3V to VADJ. It is important to note that due to its low drive current this level translation prohibits the use of strong pull resistors (<60kOhm) on data signals.1.7 Piezoelectric BuzzerA Kingstate Electronics Corp. KMTG1603-1 is beneath the screen to provide audible feedback for various frequencies.Note: For more information on the KMTG1603-1 see Kingstate product information at:/Products/Products/ProductItem/tabid/186/rtab/187/Default.aspx?ItemId=399。
有用的英文缩写
国际贸易术语英文缩写A/W 全水路All WaterB/L 海运提单Bill of LadingB/R 买价Buying RateBAF 燃油附加费Bunker Adjustment FactorC&F 成本加(海)运费Cost and FreightC.C 运费到付CollectC.S.C 货柜服务费Container Service ChargeC.Y. 货柜场Container YardC/（CNEE）收货人ConsigneeC/O 产地证Certificate of OriginCAF 货币汇率附加费Currency Adjustment FactorCFS 散货仓库Container Freight StationCFS/CFS 散装交货（起点/终点）CHB 报关行Customs House BrokerCIF 成本，保险加海运费Cost，Insurance，FreightCIP 运费、保险费付至目的地Carriage and Insurance Paid ToCOMM 商品CommodityCPT 运费付至目的地Carriage Paid ToCTNR 柜子ContainerCY/CY 整柜交货（起点/终点）D/A 承兑交单Document Against AcceptanceD/O 到港通知Delivery OrderD/P 付款交单Document Against PaymentD/R 场站收据DOCK RECEIPTDAF 边境交货Delivered At FrontieDDC 目的港码头费Destination Delivery ChargeDDP 完税后交货Delivered Duty PaidDDU 未完税交货Delivered Duty UnpaidDEQ 目的港码头交货Delivered Ex QuayDES 目的港船上交货Delivered Ex ShipDoc# 文件号码Document NumberEPS 设备位置附加费Equipment Position SurchargesEx 工厂交货Work/Ex FactoryF/F 货运代理Freight ForwarderFAF 燃油价调整附加费（日本航线专用）Fuel Adjustment Factor FAK 各种货品Freight All KindFAS 装运港船边交货Free Alongside ShipFCA 货交承运人Free CarrierFCL 整柜Full Container LoadFeeder Vessel/Lighter 驳船航次FEU 40‘柜型Forty-Foot Equivalent Unit 40’FMC 联邦海事委员会Federal Maritime CommissionFOB 船上交货Free On BoardGRI 全面涨价General Rate IncreaseH/C 代理费Handling ChargeHBL 子提单House B/LI/S 内销售Inside SalesIA 各别调价Independent ActionL/C 信用证Letter of CreditLand Bridge 陆桥LCL 拼柜Less Than Container LoadM/T 尺码吨（即货物收费以尺码计费）Measurement TonMB/L 主提单Master Bill Of LoadinMLB 小陆桥，自一港到另一港口Minni Land BridgeMother Vessel 主线船MTD 多式联运单据Multimodal Transport DocumentN/F 通知人NotifyNVOCC 无船承运人Non Vessel Operating Common CarrierO/F 海运费Ocean FreightOBL 海运提单Ocean （or Oiginal ）B/LOCP 货主自行安排运到内陆点Overland Continental PointOP 操作OperationORC 本地收货费用（广东省收取）Origen Recevie ChargesP.P 预付PrepaidPCS 港口拥挤附加费Port Congestion SurchargePOD 目地港Port of DestinationPOL 装运港Port of LoadinPSS 旺季附加费Peak Season SurchargesS/（Shpr）发货人ShipperS/C 售货合同Sales ContractS/O 装货指示书Shipping OrderS/R 卖价Selling RateS/S Spread Sheet Spread SheetSC 服务合同Service ContractSSL 船公司Steam Ship LineT.O.C 码头操作费Terminal Operations OptionT.R.C 码头收柜费Terminal Receiving ChargeT/S 转船，转运Transit-ShipT/T 航程Transit TimeTEU 20‘柜型Twenty-Foot Equivalent Unit 20’THC 码头操作费（香港收取）Terminal Handling ChargesTTL 总共TotalsTVC/ TVR 定期定量合同Time Volume Contract/ RateVOCC 船公司Vessel Operating Common CarrierW/M 即以重量吨或者尺码吨中从高收费Weight or Measurement ton W/T 重量吨（即货物收费以重量计费）Weight TonYAS 码头附加费Yard SurchargQ中国人民银行PBC People’s Bank of China中国工商银行ICBC Industrial and Commercial Bank中国建设银行CCB China Construction Bank汇丰银行HSBC Hongkong and Shanghai Banking Corporation中国银行BC Bank of China中国农业银行ABC Agricultural Bank of China交通银行BC Bank of Communications招商银行CMB China Merchants Bank中国民生银行CMB China Minsheng Bank上海浦东发展银行SPDB Shanghai Pudong Development Bank中信银行China CITIC Bank中国光大银行CEB China Everbright Bank华夏银行HB Huaxia Bank广东发展银行GDB Guangdong Development Bank深圳发展银行SDB Shenzhen Development Bank兴业银行CIB China's Industrial Bank国家开发银行CDB China Development Bank中国进出口银行EIBC Export-Import Bank of China中国农业发展银行ADBC Agricultural Development of China北京银行BOB Beijing of Bank (原北京商业银行)一些搞笑的记忆技巧：中国建设银行（CBC）："存不存"中国银行（BC）：" 不存！"中国农业银行（ABC）："啊不存"中国工商银行（ICBC）："爱存不存！ "民生银行（CMSB）："存么，傻吧 "招行（CMBC）："存么，白痴！"国家开发银行（CDB）："存点吧！"兴业银行（CIB）："存一百！"北京市商业银行（BCCB）："白存，存不"汇丰银行（HSBC）："还是不存!"中国建设银行——CCB（China Construction Bank）---存存吧中国银行——BC（Bank of China）----不存中国农业银行——ABC（Agriculture Bank of China）----啊，不存中国工商银行——ICBC（Industry and Commercial Bank of China）——“爱存不存。
常用商贸英语缩写总汇2
FAO = Food and Agricultural Organization
f.a.q. = fair average quality
f.a.q.s. = fair average quality of the season
F.A.S.; F.A.; f.f.a. = free alongside ship
Expanded Polystyrene; Polystyrene Foam
EPU; E.P.U. = (…Union)
E.P.Z. = export processing zone
Eq.; eq. = equivalent
e.q.m. = equal quantity monthly
ERP = enterprise resource planning systems
EEA = Ethylene ethylacrylate copolymer
EEC＝European Economic Community
EEMU
EFT = electronic fund transfers
EFTA =European Free Trade Area／Association
e. g.；ex.g. = exempli gratia(=for example/instance)
E.C.S.C.
ECU = European currency unit
ECWA =Economic Commission for Western Asia, ECWA
e.d.; E.D.＝ex dividend
E/D = export declararion
ed. = edited; edition
货代常用英语
1、货物将于XX时间完成？货物将于XXX（时间）完成。
When will the cargo be ready? Cargo will be ready at XXX (Jan.28th).2、仓位紧张，请尽快确认Please confirm soonest as possible due to tight space3、船公司回复——没有仓位There is no space based on the reply of shipping lines4、几票货物（几家工厂）合拼一个柜子发运 Shipment would be effected by several factories5、几个订单合并一起出运Those orders would be combined into one shipment6、截港时间 Cut off date7、截单时间 documentary off date8、开仓时间（开始放箱的时间）Empty pick up date (Empty release time)9、预留仓位 Pre-booking space10、船期调整 Adjustment of shipping schedule（因船公司调整船期，所以原计划X月X日船，XXX提单号项下货物，调整至。
）(Due to adjustment of shipping schedule, shipment under B/L NO.:….that carried by VES… ETD o n …. Would be arranged on…11、客户已于XX时候装箱 / 提箱Cargo had been stuffed on ….(Container had been picked up on..)12、客户无法赶上本航次，要求推至下一航次As requested by customer, cargo can not catch this voyage and will be postponed to next voyage 13、已向船公司订舱，但未确认仓位Booking had been ordered with shipping lines however not receive the confirmation yet. 14、放箱 Empty Release15、客人出差 Customer is on his business way16、仓位 Space17、增加/减少1个柜子 add/reduce one volume18、客户想要通过拼箱的方式出运剩下的货物 Customer intend to ship remains cargo by LCL19、最新情况 the latest status20、没有新消息 no any news(no any further information)21、此1x20’G是下面所说货物中的一部分. Said 1X20GP is part of below-mentioned shipment22、现在还没开始放仓。
福特体系钣金件常用缩写词讲解
AND
Addendum
工艺补充
ANOVA
Analysis of Variance
多样性/方差分析法
ANSI
American National Standard Institute
美国国家标准协会
AP
Advanced Purchasing
先期采购
AP
Attribute Prototype
BHF
Blank Holder Force
压边圈力
BHI
Bake Hardening Index
烘烤硬化指数
BIC
Best in Class
等级中的最佳
BMAW
Bare Metal Arc Welding
无保护金属丝电弧焊接
BOL
Bill Of Lading
提货单
BOM
Bill Of Materials
B&A
Body & Assembly Operations (New Term: Vehicle Operations)
车身与组装操作(新术语:车辆操作)
BCCP
Body Construction Control Point
车身结构控制点
BCG
Business Consumer Group
消费者工作组
操作者安全
IH ASSY
In House Assembly
长安福特装配总成
IH
In House Component
长安福特总成
EP/LP
Outsourcing Delivery Level–Assy or Component
交付状态-总成或组件
FMC Schilling Robotics T4
Copyright © 2010 by Schilling Robotics, LLC. All rights reserved.Schilling Robotics, the Schilling Robotics logo, and their frameworks are trademarks and service trademark applications of Schilling Robotics. No part of this document may be reproduced or used in any form without the express written permission of Schilling Robotics. Descriptions and specifications are subject to change without notice.We invite your comments about our products and technical manuals. Please contact:Schilling Robotics, LLC260 Cousteau Place, Ste 200, Davis, CA 95618 • Ph: (530) 753-6718 • Fax: (530) 753-8092 E-mail: Sales@ • Tech.Support@ • Customer.Service@Web Site: TECHNICAL MANUAL REVISION LOGPRODUCT: Wrist Camera 101-5074-1 (PAL) & 101-5074(NTSC)TECHNICAL MANUAL: 011-9645Description Date Rev.Prototype release02/12/06ØProduction release06/07/06ARevision (reorganize installation section)04/23/07B10/31/08CRevision (add instructions for removing cam-era)011–9645 •Page 1 of 22Operation In this manual:•1Overview .........................................................................page 1•2Preparing for Installation....................................................page 1•3Installing the Wrist Camera ................................................page 1•4Operating the Camera........................................................page 6•5Removing the Camera .......................................................page 7•6Drawings & Part Lists.........................................................page 81OverviewThe wrist camera kit 101-5074-1 (PAL) or 101-5074 (NTSC) is mounted to the yaw actuator, replacing the top wire cover plate. Video coax cables 101-5159 and 005-4948 are connected between the SeaNet penetrator on the upper arm and the camera.Camera control harness 101-5158 is connected between the camera and the in-arm electronics PCB in the forearm. Installing the coax and harness requires draining the compensation fluid from the slave arm and removing all wire cover plates.2Preparing for InstallationBefore installing the wrist camera:zDisconnect hydraulic and electrical power to the manipulator system.z Drain the compensation fluid from the slave arm.3Installing the Wrist CameraTo install the wrist camera, follow the steps below.1.Remove the four wire cover screws securing the top yaw wire cover and save for step 10. See Figure 1. 2.Remove the four manifold plate screws securing the manifold plate. These screws will not be reused for camera installation.Page 2 of 22 • 3Installing the Wrist Camera 011–9645• Wrist Camera Installation & OperationFigure 1Yaw wire cover plate and manifold plate screwsNote: Retain the original yaw wire cover, o-ring, and manifold screws for re-in-stallation of the yaw wire cover if the camera is removed.3.Remove the remaining forearm, pitch, and bottom yaw wire covers to aid in routing the new video coax cable and power harness. See Figure 2.Figure 2Forearm, pitch, and yaw wire covers 4.Determine if a video coax cable is present in forearm. The coax connector is covered with white shrink tubing. Note: A video cable was not part of the wiring harness in early Titan 4 models.—If a video cable is present, cut off white shrink tubing and skip to step h . —If a video cable is not present continue with step a to install the upper armvideo cable 101-5159.Remove yaw wire cover screws (reused)Remove manifold plate screws (replacedwith new screws)Wrist Camera Installation & Operation •011–96453Installing the Wrist Camera • Page 3 of 22a.Remove the screws securing the wiring harness and upper arm cover plates. See Figure 3. Carefully separating the covers from the upper arm to avoid damaging the harness wires.Figure 3Upper arm, wiring harness and elbow coversb.From the back side of the wiring harness cover plate, remove the snap ring (Figure 4) from inside the penetrator housing.Figure 4Snap ringc.Pull the inner connector assembly and harness out of the penetrator housing.d.Solder the coax center conductor wire to Pin 7 on the wiring harness connector. See Figure 5.e.Solder the shield wire from the coax to Pin 2 on the wiring harness connector.cover plate Snap ringPage 4 of 22 • 3Installing the Wrist Camera 011–9645• Wrist Camera Installation & OperationFigure 5Coax solder connections f.Route the coax cable 101-5159 from the SeaNet penetrator up inside and through the upper arm, through the elbow, and then down into the forearm.g.To reassemble the connector, slide the inner SeaNet penetrator assembly into the penetrator housing on the wiring harness cover panel and install the snap ring.h.Starting in the forearm, feed the coax cable 005-4948 out of the forearm, through the pitch and yaw actuators, and then out the top yaw plate. See Figure 6.Figure 6Camera cable at yaw camera mounting location i.In the forearm, slide the piece of white shrink tubing 005-1706 onto one of the coax cables then mate cables 005-4948 and 101-5159 (or existing coax cable from penetrator). Slide the shrink tubing over both connectors and heat-shrink in place. See Figure 7.Pin 2Pin 7White cable harness connector , 101-5158Coax cable connector , 005-4948Yaw plateWrist Camera Installation & Operation •011–96453Installing the Wrist Camera • Page 5 of 22Figure 7Cables 005-4948 connection 5.Connect the black connector to the auxiliary connector on the PCB, as shown in Figure 8, circled.Figure 8Wrist cable to SCE connection 6.Feed the white connector out of the forearm, and then through the pitch and yaw actuators. The white connector should extend about 7.62 cm (3-in.) out of the top yaw actuator wireway. See Figure 6 on page 4.7.Apply o-ring lube and install o-ring, 004-0139, to the channel in the mounting face of the camera housing. See Figure 9.8.Connect the white harness connector and coax cable connector to the connectors in the camera housing as shown in Figure 9.Coax cable, 101-5159 (or existing cable from pen-etrator)Shrink tube, 005-1706Coax cable, 005-4948Page 6 of 22 • 4Operating the Camera 011–9645• Wrist Camera Installation & OperationFigure 9Camera to SCE Harness 9.Before securing the camera to the yaw plate, check that the two sockethead cap screws (Figure 9) are torqued to 7.3 Nm (65 lbf/in).10.Install the camera to the yaw actuator housing using the four wire cover screws removed in step 1. Lubricate the bolts with AquaShield and torque to 28.5 Nm (21 lbf/ft).ing four new manifold plate screws (002-0333P), secure the manifold to the yaw actuator housing. Lubricate the bolts with AquaShield and torque to 28.5 Nm (21 lbf/ft).Note: Be sure all wires and coax are clear of mating faces before you tighten the bolts.12.Re-install the remaing wire cover plates. Torque all upper arm cover plate bolts to 10.8 Nm (8 lbf/ft). Torque bolts for the wireway covers, forearm manifold cover, and camera to 28.5 Nm (21 lbf/ft).4Operating the CameraUse the master controller DRIVERS menu to operate the camera and LED camera lights.1.While the system is in OPERATE mode, press the DRIVERS key.2.To turn the camera on and off, press #5 until the label reads “ON.”3.To switch LED lights to full intensity, press #4 until the label reads “ON.”4.To switch LED lights to half intensity, press #3 until the label reads “ON,” and press #4 until the label reads “OFF.”If both #3 and #4 are ON, the LED lights will remain at full intensity.Coax cable connector , 005-4948White harness connector , 101-5158PCB camera board, 101-6005Yaw actuator housingSockethead cap screws, 002-0679P O-ring, 004-0139, installed in channelWrist Camera Installation & Operation •011–96455Removing the Camera • Page 7 of 225Removing the CameraTo remove the Titan 4 wrist camera follow the instructions below.Figure 101.Remove the four wire cover screws, 002-0038P, from the camera assembly (Figure 10, A) and save for step 6.2.Remove the four manifold plate screws (Figure 10, A). These screws will not be reused.3.Cut off the shrink tubing from the coax cable connector and disconnect from the PCB camera board. See Figure 11.Note: The coax cable and white harness cable can be tucked into the yaw actuator housing for future camera installation. If doing so, install a piece of heat shrink (005-1706) onto the coax cable connector to prevent a ground fault.4.Disconnect the white harness cable connector from the PCB camera mount. See Figure 11.001-2676A - Camera InstalledB - Camera RemovedPage 8 of 22 • 6Drawings & Part Lists 011–9645• Wrist Camera Installation & OperationFigure 115.Before installing the pitch/yaw wire cover (Figure 10, B):—Inspect the O-ring (004-0139) and replace if necessary.—Check the two sockethead cap screws, 002-0679P, (Figure 11) and confirm they are torqued to 7.3 Nm (65 lbf/in).6.Secure the pitch/yaw wire cover with the four wire cover screws removed in step1. Lubricated the bolts with AquaShield and torque to 28.5 Nm (21 lbf/ft). See Figure 10, B.7.Re-install four new manifold plate screws (002-0052P) to the yaw actuator (Figure 10, B). Do not use old screws. Lubricated the bolts with AquaShield and torque to 28.5 Nm (21 lbf/ft).8.The slave arm is ready for normal operation. Refer to the Titan 4 Technical Manual specific to your system for further information.6Drawings & Part ListsThe part lists and drawings in this section are in numerical order, ordered first by the three digit prefix, and then by the following four digit number. For a complete list, see the index below.z Individual parts of a component are cross-referenced between the drawing and part list using the numbers in the “Item” column. On the drawing, item numbers are placed in a circle, with lines drawn to the related part.z Zero (0) quantity items are for reference only (typically schematics, special assem-bly tools, or expendable materials used during initial assembly).zElectrical schematics (prefix 035-) and hydraulic schematics (prefix 025-) do not have part lists.Coax cable connector , 005-4948(cut off shrink tubing)White harness connector , 101-5158PCB camera board, 101-6005Yaw actuator housingSockethead cap screws, 002-0679PWrist Camera Installation & Operation •IndexIf a drawing has details that are difficult to read on the printed page, look for it in the“Reference Drawings & Part Lists” volume (which uses a larger paper size), or openthe PDF manual file containing the drawing and zoom in on the desired details.Titan Wrist Camera Kit, NTSC, 101-5074...................................page 10Titan Wrist Camera Kit, PAL, 101-5074-1...................................page 11Cable, Wrist Camera to SCE, 101-5158.....................................page 12Titan Wrist Camera, NTSC, 101-6039........................................page 14Titan Wrist Camera, PAL, 101-6040..........................................page 17Titan Wrist Camera, NTSC, 005-5375 Spec Sheet.......................page 20Titan Wrist Camera, PAL, 005-5376 Spec Sheet..........................page 21 011–96456Drawings & Part Lists • Page 9 of 221 101-6039 CAMERA,WRIST,T4,NTSC12 101-5158 CABLE,WRIST CAMERA TO SCE13 101-5159 CABLE,COAX,WRIST,SEANET/CAMERA14 005-4948 CABLE,SMA-M TO SMA-M,36"15 005-1706 TBG,SHRINK,3/8 WHT0.256 002-0333P NAS 6404PU14,NLK47 004-0139 O-RING,2-040 BUNA 701 50 011-9645 MNL,T4 CAMERA/LED LITES KIT11 101-6040 CAMERA,WRIST,T4,PAL12 101-5158 CABLE,WRIST CAMERA TO SCE13 101-5159 CABLE,COAX,WRIST,SEANET/CAMERA14 005-4948 CABLE,SMA-M TO SMA-M,36"15 005-1706 TBG,SHRINK,3/8 WHT0.256 002-0333P NAS 6404PU14,NLK47 004-0139 O-RING,2-040 BUNA 701 50 011-9645 MNL,T4 CAMERA/LED LITES KIT1Cable, Wrist Camera to SCE, 101-5158Rev.EItem P/N Description Qty 1 005-4932 CONN,6 PIN,HOUSING,ZH,1.5MM12 005-4933 TERMINAL,CRIMP,FEMALE,26 AWG43 005-4743 CONN,8 PIN,RCPT,3mm,LATCH14 005-4627 TERM,CRIMP,FEMALE,20-24AWG,3mm45 005-3610 WIRE,26AWG,STRD,600V,GRAY W/BL136 005-1216 TBG,SHRINK,3/32(BRIM # SH135-3 3.51000 101-5158-WI WORK ISNTRUCTIONS0Titan Wrist Camera, NTSC, 101-6039Rev.CItem P/N Description Qty 1 007-0675 HOUSING,CAMERA,WIRST,T412 001-7684 BEZEL,WRIST CAMERA,T414 002-1112P NAS 6403PU1,NLK45 004-0832 O-RING,2-026,BUNA 7037 004-0043 O-RING,2-033 BUNA 7018 001-9110 WINDOW,36mmX8mm,SAPHIRE39 005-5375 CAMERA,COLOR BULLET NTSC110 101-6006 ASSY,PCB WRIST CAM LED BOARD211 005-5411 EPOXY,OPT CLEAR HIGH IMPACT112 101-6005 ASSY,PCB CAMERA BOARD120 005-0654 TBG,SHRINK,3/64,BLK,BRIM # SH10.1321 002-3256 SHCS,4-48 X 1/4, ALLOY222 004-0695 O-RING,2-021,BUNA 70224 005-3087 WIRE,26AWG,STRD,TEFZEL,600,RED 2.325 005-2154 WIRE,26AWG,19/38 TEFZEL 600V 2.326 002-3292 FOAM STRIP,3/8 THICK0.327 001-7886 DIFFUSER,CAMERA LIGHT228 005-3092 WIRE,26AWG,STRD,TEFZEL,600,YEL0.830 005-5980 DESICCANT,MOIST ABSORB BOARD01000 101-6039-WI WORK INSTRUCTIONS0Titan Wrist Camera, PAL, 101-6040Rev.BItem P/N Description Qty 1 007-0675 HOUSING,CAMERA,WIRST,T412 001-7684 BEZEL,WRIST CAMERA,T414 002-1112P NAS 6403PU1,NLK45 004-0832 O-RING,2-026,BUNA 7037 004-0043 O-RING,2-033 BUNA 7018 001-9110 WINDOW,36mmX8mm,SAPHIRE39 005-5376 CAMERA,COLOR BULLET PAL110 101-6006 ASSY,PCB WRIST CAM LED BOARD211 005-5411 EPOXY,OPT CLEAR HIGH IMPACT112 101-6005 ASSY,PCB CAMERA BOARD120 005-0654 TBG,SHRINK,3/64,BLK,BRIM # SH10.1321 002-3256 SHCS,4-48 X 1/4, ALLOY222 004-0695 O-RING,2-021,BUNA 70224 005-3087 WIRE,26AWG,STRD,TEFZEL,600,RED 2.325 005-2154 WIRE,26AWG,19/38 TEFZEL 600V 1.526 002-3292 FOAM STRIP,3/8 THICK0.327 001-7886 DIFFUSER,CAMERA LIGHT228 005-3088 WIRE,26AWG,STRD,TEFZEL,600,BLU0.829 005-3089 WIRE,26AWG,STRD,TEFZEL,600,GRN0.830 005-5980 DESICCANT,MOIST ABSORB BOARD01000 101-6040-WI WORK INSTRUCTIONS0This page not used.。
各公司水下管汇
FMC公司Core TechnologiesAs the world's largest integrated subsea systems supplier, FMC Technologies has solutions expertise second to none. Customized manifold and tie-in solutions are developed for a complete range of applications using standard, field proven components. This proven approach minimizes capital and operating expenditures across the subsea field. Performance of all metal seals and valves has been verified through API 6A Appendix F PR2 tests.ValvesFMC Technologies' valves have been meeting performance and endurance demands for years. Versatile metal-sealing gate and ball valves are at work in offshore and subsea applications in virtually every major oil and gas producing area of the world. Available in working pressures to 15,000 psi, FMC's valves come in trims for a complete range of water, oil and gas services, including corrosive, high-temperature, arctic and sandy environments.SealsFMC offers metal-to-metal and proprietary elastomer seals proven in a complete range of high-pressure, high-temperature subsea services.∙Elastomer SealsFMC Technologies Non-Metallics Department produces a variety of hydrogenated nitrile rubber compounds for use inhigh-pressure, high-temperature applications. Seal compounds are rated for all API material classes, including HH, and are also amine resistant. Anti-extrusion devices compensate for thermal expansion/contraction of the seal element.∙Metal SealsFMC's proprietary metal seals have gained global acceptance in offshore and subsea services. A complete range of energized metal-seal options is available to increase service life and improve production efficiencies in manifold applications.ConnectorsFMC's provides a series of connection products from single bore to multi bore (from 2" to 36"). Connectors are used to make strong pressure tight connections designed to withstand high pressure, temperature, bending and torsional load condiitons. FMC offers both Collet and Clamp style for multiple applications.Manifold Pipeline Systems------ManifoldFMC's manifold systems are designed to allow the production headers to be sized using nominal pipe diameters. In most project applications, all manifold piping connections are welded to minimize leak paths and increase reliability. Many manifolds feature a removable pigging loop to allow round trip pigging of the production flowlines.FMC's manifolds are:∙Rated for water depths to 10,000 feet and 15K psi working pressures∙Temperatures to 350o F∙Available in sizes from 6" to 30" diameters∙Available foundations for all soil conditions∙Offer multi-phase flow meters∙Offer optional manifold mounted SCMs and chokesAker 公司Manifolds and structuresOur extensive product portfolio includes structures suitable for both horizontal and vertical connections. We have delivered more than 150 structures to projects globallyWe offer template designs with:∙Manifold modules, fixed or retrievable∙Support structures, fixed or hinged (for moonpool installation)∙Foundation for soft soil or firm soil∙Overtrawlable/ non-overtrawlable design∙Flexible installation methodsWe offer manifold modules with flexibility/ options for:∙Choke modules∙Control modules∙High Integrity Pressure Protection System (HIPPS)∙Dual header manifold with pigging loop∙Single header manifold with pig launcher connection∙Daisy chaining to additional manifolds∙Satellite step outs via:- rigid jumpers- flexible or rigid flowlines∙Vetco Gray Template ManifoldsProducts:• Integrated manifolds • Deepwater clustermanifolds• Pipeline-end manifoldsFeatures & BenefitsAccommodates close spacing of subsea wellsEliminates need for well jumpersSuited for applications with full overtrawlability requirementsAccommodates a wide variety of configuration requirements and design optionsRange of foundation system solutions to match diverse soil properties and seabed conditionsCluster ManifoldsCluster manifolds are used to commingle the flow from adjacent subsea wells (“clustered” around the parent manifold) into flowline headers, for onwards connection to export flowlinesFeatures & BenefitsSubsea manifold systems based on pre-engineered, modular building blocksAccommodates a wide variety of configuration requirements and design optionsRange of foundation system solutions to match diverse soil properties and seabed conditionsHIPPS ManifoldsHIPPS (High Integrity Pressure Protection System) Manifolds are used to facilitate high integrity subsea valves and control system equipment needed to protect oil and gas production systems from excessive pressure levels.Features & BenefitsCompact and lightweight solutionsIntegrated control systemsEnables reduced pressure ratings on pipelines and host processing facilities。
FMC Corporation 农业产品部 First Aid 产品说明说明书
FIRST AIDIfon skin or clothing•Take off contaminated clothing.•Rinse skin immediately with plenty of water for 15-20minutes.•Call a poison control center or doctor for treatment advice.Page 11686Net ContentsFor use to control Ants (including Imported Fire Ants),Mole Crickets and other Insect pests on lawns in landscaped areas and perimeters around residen-tial,institutional,public,commercial and industrial buildings,parks,recreational areas and athletic fields.EPA Reg.No.279-3168EPA Est.279-Active Ingredient:By Wt.Bifenthrin*..............................................................0.2%Other Ingredients ...............................................99.8%100.0%*Cis isomers 97%minimum,trans isomers 3%maximum.U.S.Patent No.4,238,505KEEP OUT OF REACH OF CHILDRENCAUTIONFMC CorporationAgricultural Products Group 1735Market Street Philadelphia PA 191031-29-09PRECAUTIONARY STATEMENTSHazards to Humans (and Domestic Animals)CautionHarmful if absorbed through skin.Avoid contact with skin,eyes or clothing.Environmental HazardsThis pesticide is extremely toxic to fish and aquatic invertebrates.Do not apply directly to water or to areas where surface water is present or to intertidal areas below the mean high water mark.Do not apply when weather conditions favor drift from treated areas.Drift and run-off from treated areas may be hazardous to aquatic organisms in neighboring areas.Do not contaminate water when disposing of equipment wash-waters or rinsate.DIRECTIONS FOR USEIt is a violation of Federal Law to use this product in a manner inconsis-tent with its labeling.Not for use on plants being grown for sale of other commercial use,or for commercial seed production,or for research pur-poses.For use on plants intended for aesthetic purposes or climate modification and being grown in interior plantscapes,ornamental gar-dens or parks,or lawns or grounds.Do not apply more than 0.2lb.active ingredient (a.i.)per acre per appli-cation on residential use sites (i.e.,around private homes,apartment buildings,condominiums,non-agricultural outbuildings,non-commer-cial greenhouses,pre-schools or day care facilities).May be applied at up to 0.4lb.a.i.per acre per application on non-residential use sites (i.e.,around institutional,public,commercial or industrial buildings;parks;recreational areas or athletic fields).Do not broadcast apply more than 0.4lbs.A.I.(200lbs.Talstar PL Granular)per Acre per year.Not for use on golf courses,sod farms,nurseries,in commercial green-houses or on grass grown for seed.See other panels for additional precautionary information.orSee back panel pamphlet for additional precautionary information and complete directions for use.Have the product container or label with you when calling a poison control center or doctor,or going for treatment.You may also contact 1-(800)-331-3148for Emergency Assistance.NOTE TO PHYSICIANFor Information Regarding the Use of this Product Call 1-800-321-1FMC (1362).This product is a pyrethroid.If large amounts have been ingested,milk,cream and other digestible fats and oils may increase absorp-tion and so should be avoided.HOTLINE NUMBERPage 2LAWN AND PERIMETER APPLICATIONSLawn Application:Broadcast Talstar ®PL granular insecticide with suitable application equipment to ensure uniform coverage over the treatment area.APPLICATION RATESArmyworms 1Cutworms 1Sod Webworm 1Annual Bluegrass Weevil (Hyperodes )(Adult)2Billbugs (Adult)3Black Turfgrass Ataenius (Adult)4Leafhoppers MealybugsAntsCentipedes Chinch Bugs 5European Crane Flies (larvae)6Fleas (Larvae)7Fleas (Adult)Imported Fire Ants (Adult)8Imported Fire Ants (Mounds)8MillipedesMole Cricket (Adult)9Mole Cricket (Nymph)10Pillbugs Scorpions 11Sowbugs Ticks 110.1lbs.AI/A 0.1-0.2lbs.AI/A0.2-0.4lbs.AI/A 50lbs.per acre50-100lbs.per acre100-200lbs.per acre 1.15lbs.per 1000sq.ft.1.15-2.3lbs.per 1000sq.ft.2.3-4.6lbs.per 1000sq.ft.PestActive ingredient lbs.per acreApplication Rate Talstar PLThe application rates listed in the following table will provide excellent con-trol of the respective pests under typical conditions.However,at the dis-cretion of the applicator,Talstar PL may be applied at up to 0.4lb AI/A to control each of the pests listed in this Table.However,for residential lawn use,do not apply more than 0.2lbs.A.I.per Acre per application.Comments1Armyworms,Cutworms,and Sod Webworms:To ensure optimum control,irri-gate the treated area with up to 0.1inches of water immediately after application to activate (release from the granule)the insecticide.2Annual Bluegrass Weevil (Hyperodes)adults:Applications should be timed to control adult weevils as they leave their overwintering sites and move into grass areas.This movement generally begins when Forsythia is in full bloom and con-cludes when flowering dogwood is in full bloom.Consult your State Cooperative Extension Service for more specific information regarding application timing.3Billbug adults:Applications should be made when adult billbugs are first observed during April and May.Degree day models have been developed to opti-mize application timing.Consult your State Cooperative Extension Service for information specific to your region.In temperate regions,spring applications tar-geting billbug adults will also provide control of over-wintered chinch bugs.4Black Turfgrass Ataenius adults:Applications should be made during May and July to control the first and second generation of black turfgrass ataenius adults,respectively.The May application should be timed to coincide with the full bloom stage of Vanhoutte spiraea (Spiraea vanhouttei )and horse chestnut (Aesculus hippocastanum ).The July application should be timed to coincide with the bloom-ing of Rose of Sharon (Hibiscus syriacus ).5Chinch Bugs:Chinch bugs infest the base of grass plants and are often found in the thatch layer.Irrigate the treated area with up to 0.25inches of water immedi-ately after application to activate (release from the granule)the insecticide.Chinch bugs can be one of the most difficult pests to control in grasses and the higher applications rates may be required to control populations that contain both nymphs and adults during the summer.6European Crane Flies:Treatments should be made to control early to mid-sea-son larvae (approximately August –February)as they feed on plant crowns.Treatments made to late-season larvae (approximately March -April)may only provide suppression.Consult your local extensions agent for specific recommen-dations for your area.7Flea larvae:Flea larvae develop in the soil of shaded areas that are accessible to pets or other animals.Irrigate the treated area with up to 0.5inches of water immediately after application to activate (release from the granule)the insecticide.8Imported Fire ants:Control will be optimized by combining broadcast applica-tions that will control foraging workers and newly mated fly-in queens with mound treatments that will control existing colonies.If the soil is not moist,then it is impor-tant to irrigate before application.Broadcast treatments should apply 0.2to 0.4lb AI/A.Mounds should be treated by applying cup of Talstar PL Granular per mound and then drenching the mound with 1to 2gallons of water.The mounds should be treated with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels.Treat three feet out around the mound.For best results,apply in cool weather (65-80˚F)or in early morning or late evening hours.9Mole Cricket adults:Achieving acceptable control of adult mole crickets is diffi-cult because preferred grass areas are subject to continuous invasion during the early spring by this extremely active stage.Applications should be made as late in the day as possible and should be watered in with up to 0.5inches of water immediately after treatment.If the soil is not moist,then it is important to irri-gate before application to bring the mole crickets closer to the soil surface where contact with the insecticide will be maximized.Grass areas that receive pressure from adult mole crickets should be treated at peak egg hatch to ensure optimum control of subsequent nymph populations (see below).10Mole Cricket nymphs:Grass areas that received intense adult mole cricket pressure in the spring should be treated immediately prior to peak egg hatch.Optimal control is achieved at this time because young nymphs are more suscep-tible to insecticides and they are located near the soil surface where the insecti-cide is most concentrated.Control of larger,more damaging,nymphs later in the year may require both higher application rates and more frequent applications to maintain acceptable control.Applications should be made as late in the day as possible and should be watered in with up to 0.5inches of water immediately after treatment.If the soil is not moist,then it is important to irrigate before application to bring the mole crickets closer to the soil surface where contact with the insecti-cide will be maximized.11Scorpions:To ensure optimum control,treat the building perimeter at dusk to prevent outdoor scorpions from entering the building.Scorpions reside hidden in cracks and voids during the day and are active at night at temperatures above 77ºF/25ºC.Resting areas can be identified at night using a blacklight (UV bulb)as scorpions will fluoresce.These areas should also be treated.Prior to treatment,to increase treatment efficacy,remove trash,debris,or firewood that scorpions may use as resting sites.12Ticks (Including ticks that may transmit Lyme Disease and Rocky Mountain Spotted fever):Do not make spot applications.Treat the entire area where exposure to ticks may e higher application rates when treating areas with dense ground cover or heavy leaf litter.Ticks may be reintroduced from surrounding areas on host animals.Do not allow public use of treated areas dur-ing application.Deer ticks (Ixodes sp.)have a complicated life cycle that ranges over a two year period and involves four life stages.Applications should be made in mid to late-spring to control larvae and nymphs that reside in the soil and leaf litter.American dog ticks may be a considerable nuisance in suburban settings,par-ticularly where homes are built on land that was previously field or forest.These ticks commonly congregate along paths or roadways where humans are likely to be encountered.Applications should be made as necessary from mid-spring to early fall to control American dog tick larvae,nymphs and adults.Perimeter Application:Apply to ground area 5to 10feet wide around and adjacent to the structure.Applic.Rate:Pounds Per Band 1,000sq.ft.Width 1001502002503004005001,0002.35feet 1.3 1.9 2.5 3.0 3.6 4.8 5.911.72.310feet 3.0 4.2 5.3 6.57.69.912.223.73.05feet 1.7 2.5 3.3 3.9 4.7 6.37.715.23.010feet 3.9 5.4 6.98.59.912.915.930.93.55feet 2.0 2.9 3.8 4.5 5.47.28.917.53.510feet 4.5 6.38.09.811.414.918.335.54.65feet 2.6 3.8 5.0 6.07.29.611.823.44.610feet6.08.410.613.015.219.824.447.4Note:The amounts of Talstar PL Granular listed in the above table are based on the total area being treated.This area is determined by multiplying the linear dis-tance by the band width and then adding to that value the area of a circle whose radius is equal to the band width (to account for the area treated at the four cor-ners of a rectangular structure).Pounds of Talstar PL Granular for Perimeter ApplicationsLinear Distance (Feet)Around Structure Boundary Applications:Apply to soil areas,ornamental gardens,pave-ment crevices,fencelines,planter areas,vegetation areas and mulch areasIn New York State,this product may NOT be applied to any grass or turf area within 100feet of a water body (lake,pond,river,stream,wetland,or drainage ditch).In New York State,do make a single repeat application of Talstar PL Granular if there are signs of renewed insect activity,but not sooner than two weeks after the first application.STORAGE AND DISPOSALProhibitionsDo not contaminate water,food or feed by storage or disposal.Pesticide StorageKeep out of reach of children and animals.Store in original con-tainers only.Store in a cool,dry place and avoid excess heat.Carefully open containers.After partial use close tightly.In case of spill,avoid contact,isolate area and keep out animals and unprotected persons.Confine spills.Call FMC:(800)331-3148.To confine spill:Cover to prevent dispersal.Place damaged package in a holding container.Identify contents.Pesticide DisposalWastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.Container DisposalPaper and plastic bags:Non-refillable.Do not reuse or refill this pletely empty bag into application equip-ment.Then offer for recycling,if available,or dispose of empty bag in a sanitary landfill or by incineration,or,by burning.Do not burn unless allowed by state or local authorities.If burned,stay out of smoke.Page 3INDUSTRIAL NON-AGRICULTURAL APPLICATIONS (Including Industrial Sites,Parks,Ball Fields and Cemeteries)Broadcast Spot Applications:For the control of actively foraging ants (including Imported Fire Ants)broadcast uniformly 2.3to 4.6lbs.Talstar PL granular insecticide per 1000sq.ft.(0.2to 0.4lbs.a.i./Acre).See comments section under Lawn Applications for additional rate recom-mendations.Pad Mounted Electrical Sites:To reduce or prevent ant mound build-ing activity on electrical pads,uniformly distribute 1.0to 1.5Tablespoons (0.06to 0.09lbs.)of Talstar PL granular insecticide per 4sq.ft.of mounting pad.Where existing transformers are completely or partially filled with soil excavated by resident ants,remove any excess fill and level the remaining soil prior to application.Food utensils such as tablespoons must not be used for food purposes after use in measuring pesticides.Note:Electrical transformers appear to be more attractive to ants dur-ing the cooler months.For best results treat in the Fall or early Spring.Resistance:Some insects are known to develop resistance to products used repeatedly for control.Because the development of resistance cannot be predicted,the use of this product should conform to resis-tance management strategies established for the use area.Consult your local or state pest management authorities for details.If resistance to this product develops in your area,this product,or other products with a similar mode of action,may not provide adequate con-trol.If poor performance cannot be attributed to improper application or extreme weather conditions,a resistant strain of insect may be present.If you experience difficulty with control and suspect that resistance is a reasonable cause,immediately consult your local company representa-tive or pest management advisor for the best alternative method of con-trol for your area.Fire ant mound treatment:Apply 1/2cup of Talstar ®PL Granular Insecticide per mound and then drench the mound with 1to 2gallons of water.The mound should be drenched with sufficient force to break its apex and allow the insecticide to flow into the ant tunnels.Treat three feet out around the mound.For best results,apply in cool weather (65to 80˚F)or in early morning or late evening hours.Treat new mounds as they appear.Food utensils such as teaspoons and measuring cups should not be used for food purposes after use with insecticideConditions of Sale and Limitation of Warranty and Liability:NOTICE:Read the entire Directions for Use and Conditions of Sale and Limitation of Warranty and Liability before buying or using this product.If the terms are not acceptable,return the product at once,unopened,and the purchase price will be refunded.The Directions for Use of this product must be followed carefully.It is impossible to eliminate all risks inherently associated with the use of this product.Crop injury,ineffectiveness,or other unintended conse-quences may result because of such factors as manner of use or appli-cation,weather or crop conditions beyond the control or FMC or Seller.All such risks shall be assumed by Buyer and User,and Buyer and User agree to hold FMC and Seller harmless for any claims relating to such factors.Seller warrants that this product conforms to the chemical description on the label and is reasonably fit for the purposes stated on the Directions for Use when used in accordance with the directions under normal conditions of use.TO THE EXTENT CON-SISTENT WITH APPLICABLE LAW,FMC MAKES NO WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE,NOR ANY OTHER EXPRESS OR IMPLIED WAR-RANTIES WITH RESPECT TO THE SELECTION,PURCHASE,OR USE OF THIS PRODUCT.Any warranties,express or implied,hav-ing been made are inapplicable if this product has been used con-trary to label instructions,or under abnormal conditions,or under conditions not reasonably foreseeable to (or beyond the control of)seller or FMC,and buyer assumes the risk of any such use.To the extent consistent with applicable law,FMC or seller shall not be liable for any incidental,consequential or special damages resulting from the use or handling of this product.TO THE EXTENT CONSIS-TENT WITH APPLICABLE LAW,THE EXCLUSIVE REMEDY OF THE USER OR BUYER,AND THE EXCLUSIVE LIABILITY OF FMC AND SELLER FOR ANY AND ALL CLAIMS,LOSSES,INJURIES OR DAM-AGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY,CONTRACT,NEGLIGENCE,TORT,STRICT LIABILITY OR OTHER-WISE)RESULTING FROM THE USE OR HANDLING OF THIS PROD-UCT,SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR,AT THE ELECTION OF FMC OR SELLER,THE REPLACEMENT OF THE PRODUCT.This Conditions of Sale and Limitation of Warranty and Liability may not be amended by any oral or written agreement.Talstar and FMC -FMC TrademarksTalstar PL Spreader Setting GuideLesco®Broadcast -NewLesco®Broadcast -OldScotts®HandyGreen®IIScotts®SpeedyGreen®2000Scotts®Standard BroadcastGandy®Models 42,36,30,24"Spyker®All Models (Push)Application Rate lbs/1,000sq.ft.5C +1/210B +1/4A +1/2231/4102*----3**--**1612--10.5 3.12.625103----7--9--10101.15lbs 2.3lbs 4.6lbsPattern Setting Width Ft.Ground Speed at ~3.1mph for all settings *2is the lowest setting for this model**This model does not have settings fine enough for this application。
product list
Channel 1 1 1 1 1 1 1 1 1 1 4月1日 1 1 2 1 1 1 2 2 2 1 1 5 4 2 5 4 2 5 4 5 1 5 1 1 4 5 1 1 1 1 1 1 2 2 1
Reverse Stand-off Voltage VRWM (V) 5 ¡À5 ¡À5 12 ¡À3.3 5.5 12 10 5 5 5月24日 8 12 5 ¡À4.6 5 7 5 5 5 5 5 5 5 5 5 5 5 5 5 5 ¡À5 5 ¡À3.3 ¡À5 5 5 ¡À5 7 5 5 12 ¡À3.3 ¡À2.8 ¡À5 15
ESD5681N12 ESD5681N07 ESDA6V1W5 ESD5661D15 ESD5661D12 ESD5651N ESD5641D15 ESD5641D12 ESD5641D07 ESD5621W15 ESD5621W ESD5621W04 ESD5601W ESD5471Z ESD5471X ESD5471S ESD5452N ESD5451X ESD5451R ESD5451N ESD5432N ESD5432E ESD5431Z ESD5431N ESD5425E ESD5423B ESD5411N ESD5374D ESD5347H ESD5345H ESD5344D ESD5341X ESD5341N ESD5325E ESD5311Z ESD5311N ESD5306D ESD5304D ESD5301N ESD9X5VA ESD9NS5V ESD9N12BA ESD9N5BM ESD9D5U ESD9B5VL ESD9B5VDA ESD5B5VL
Junction Capacitance CJ (pF) (Max.) 12 22 35 120 22 22 440 500 1200 0.4 0.8/550 1.8 1.8 0.65 300 70 65 12 1.4 0.65 1.6 0.9
施耐德 FMC-210-DM 双动式火警手动报警器 使用说明书
FireAlarmSystems - FMC‑210‑DM Double Action Call PointsFMC‑210‑DM Double Action Call Pointsu Adjustment after alarm triggeringu Individual identification thanks to automatic or manual detector addressingu Indicator LED for alarm or for inspection evaluationu Query routines with evaluation and multiple transmissionu Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolatorsThe FMC-210-DM Double-action Call Points are used for manual triggering, and can be used in the Local SecurityNetwork LSN and LSN improved. Form H Manual Call Points are designed for outdoordeployment, form G Manual Call Points are designed for indoor deployment.FunctionsIn the event of an alarm, the glass pane (2) is broken first, then the manual call point (3) is pressed hard.This activates the microswitch for alarm triggering and the indicator LED (4) blinks. A mechanism holds the pressed call point down.The manual call point can be reset with the reset lever (5) or by closing the door of the manual call point (1).The indicator LED (4) goes out.This does not reset the alarm on the fire panel.Individual call point identification with display of the call point address on the fire panel ensures the quick location of the triggered call point.VariantsThe designs of the manual call points for outdoor and indoor use are identical. The manual call points for indoor use (form G) are available in red, blue, yellow,and green. The manual call points for outdoor use (form H) are available in red and blue.Form H manual call points are equipped with an especially resistant PC board layered with parylene.iNoticeThe key must be ordered separately.Improved LSN featuresThe manual call points offer all the features of the improved LSN technology:•Flexible network structures, including T-tapping without additional elements •Up to 254 LSN improved elements per loop or stub line •Automatic or manual detector addressing selectable via rotary switch, in each case with or without auto-detection •Shielded and unshielded cables can be used •Cable length up to 3000 m (with LSN 1500 A module)•Downwards compatibility to existing LSN systems and control panelsCertifications and approvals Type Number Complies withFMC‑210‑DM‑G‑R EN 54-11:2001/A1:2005, EN 54-17:2005FMC‑210‑DM‑H‑R EN 54-11:2001/A1:2005, EN 54-17:2005FMC‑210‑DM‑G‑YEN 12094-3:2003, EN 54-17:2005Installation/configuration notes•The device must be mounted visibly along escape and rescue routes (e.g. exits, passageways,stairwells) and be easily accessible.•An installation height of 1400 mm ±200 mm, measured from the middle of the device to thefloor, must be maintained.•The device must be adequately illuminated by sunlight or another light source (includingemergency lighting if present).•The maximum number of LSN elements that may be connected depends on their current consumption from the LSN data line. The limit values should be taken from the product information supplied with the fire panel used.•Additional norms, guidelines, and planning recommendations with respect to installationlocation, etc. must be taken into account (see fire detector manual).•The regulations of the local fire services must be observed.Installation•The cable duct can be surface-mounted or flush-mounted.•Installation in fire hose cabinets is possible in three ways:Installation depth1ca. 40 mm 214 mm 3min. 30 mmTechnical specifications ElectricalMechanicsEnvironmentalOrdering informationFMC-210-DM-G-B Manual call point indoor, blueAnalog addressable manual call point with glass pane for indoor use, indirect alarm triggering (type B), blue Order number FMC-210-DM-G-B | F.01U.011.959FMC-210-DM-G-GR Manual call point indoor, greenAnalog addressable manual call point with glass pane for indoor use, indirect alarm triggering (type B), green Order number FMC-210-DM-G-GR | F.01U.328.502FMC-210-DM-G-R Manual call point indoor, redAnalog addressable manual call point with glass pane for indoor use, indirect alarm triggering (type B), red Order number FMC-210-DM-G-R | F.01U.011.956FMC-210-DM-G-Y Manual call point indoor, yellowAnalog addressable manual call point with glass pane for indoor use, indirect alarm triggering (type B), yellow Order number FMC-210-DM-G-Y | F.01U.011.961FMC-210-DM-H-B Manual call point outdoor, blueAnalog addressable manual call point with glass pane for outdoor use, indirect alarm triggering (type B), blue Order number FMC-210-DM-H-B | F.01U.011.960FMC-210-DM-H-R Manual call point outdoor, redAnalog addressable manual call point with glass pane for outdoor use, indirect alarm triggering (type B), red Order number FMC-210-DM-H-R | F.01U.011.958AccessoriesFMX-FSO-LSN FMX-FSO-LSN foilset operating panel MCPFor the labeling field of manual call points of the series FMC-210, 1 unit = 10 sheetsOrder number FMX-FSO-LSN | F.01U.033.169FMC-FST-DE Foil set, transparentFor yellow and blue manual call points of the seriesFMC-120 and FMC-210, 1 unit = 5 sheetsOrder number FMC-FST-DE | F.01U.012.951FMC-SPGL-DEIL Spare glassFor manual call points of series DM, DKM, SKM,FMC-120 and FMC-210, 1 unit = 5 spare glassesOrder number FMC-SPGL-DEIL | F.01U.025.845FMM-KEY-FORM G/H Key for manual call pointmade of red plastic (ASA)Order number FMM-KEY-FORM G/H | 3.756.630.007Represented by:Europe, Middle East, Africa:Germany:North America:Asia-Pacific:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284****************************** Bosch Sicherheitssysteme GmbHRobert-Bosch-Ring 585630 GrasbrunnGermanyBosch Security Systems, LLC130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 9180*******************.comRobert Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 2699*****************************Data subject to change without notice | 1288927243 | V27 | September 24, 2020© Bosch Security Systems 2020。
通用英文缩写的全称
Acronym AA ABIW ACC AD ADE AFI AEFDW AEFW APE APET ARC ASSI B BOC BOM BOR CAE CAL CC CDC CKD CNG COS CR/DN CSO CSS CT CTD CTF CV CVER CY DAQ DBOM DC DCS DD DDR DFP DMPBR
Definition Key Indicator Report Learning Analysis Development Validation Lifecycle Continuous Improvement Long Lead Lifecycle Program Execution Liquified Propane Gas Lifecycle Program Initiation Level Matching Matching 1 Manufacturing Confirmation Build Mid Cycle Enhancement Manufacturable Math Release Master Parts List Material Required Date Market Strategy Review Manufacturing Validation Build Manufacturing Validation Build NonSalable Manufacturing Validation Build Salable Market Validation Review Notice Of Action NonSalable Quality Assessment Process Personal Average Fuel Economy Program Definition Completed Product Development Team Program Engineering Manager Product Execution Committee Program Execution Team Program Executive Decision Workshop Program Executive Framing Workshop Program Framing Complete Program Framing Initiation Program Program Management/Manager Price of Entry Production Parts Approval Process Program Physical Build Requirements Defined Program Product Content Product and Proceinition Architecture Approval Advanced Body In White Architecture Confirmation Complete Alternatives Developed Abbreviated Durability Evaluation Architecture Framing Initiation Architecture Executive Framing Decision WorkShop Architecture ExecutiveFraming WorkShop Annual Program Execution Advanced Program Execution Team Architecture Refinement Complete Architecture Statement of Strategic Intent Build Bill of Competitiveness Bill of Material Buy Off Ride Computer Aided Design Calibration Confirmation Clinic Customer Decision Criteria Complete Knock Down Compressed Natural Gas Country of Sale Change Request/Decision Notice Contract Sign Off Commodity Strategy Session Critical Test Concept Technical Descriptors Captured Test Fleet Concept Vehicle Concept Vehicle Engineering Release Calendar Year Design Appearance Quality Design Bill of Material Design Clinic Design Concept Sheets Design Direction Design Direction Review Decision Fixed Point Deliver Mule Physical Build Requirements
fmc_subsea_wellheadbro水下井口系统
Subsea Drilling Systems24FMC’s UWD-15 subsea wellhead systems have continuously met customer needs since their introduction in 1991. Today’s UWD-15 family advances this long tradition of excellence in a complete range of high pressure and deepwater applications.UWD-15 Subsea Wellhead SystemsModular, Stackable DesignRated for working pressures up to 15,000 psi, FMC offers UWD-15 subsea wellhead systems for a complete range of shallow and deepwater drilling and production scenarios, including standard, shallow water flow, large bore and rigidized/preloaded operations. These modular designs and multi-task running tools enablemany of the same components to be used across the UWD-15 family.Specialized Tools Reduce Trips, Installation TimeThe benefits of FMC’s modular subsea wellhead design extend to its industry leading running tools. UWD-15 systems use fewer running and test tools than any competitive subsea drilling system. These multi-function tools provide options for running and retrieving components either individually or in combination with other components, enabling fast, accurate and reliable UWD-15 system installation.18-3/4” Wellhead Running ToolStandard Rigid Lock Stack DownLarge Bore5Standard UWD-15 SystemDesigned for drilling and production applications up to 15,000 psi working pressure, the StandardUWD-15 System features a world-proven weight- s et, metal-to-metal seal design. The StandardSystem is designed for applications in water depths ranging from a few hundred feet to 6,000 feet.Systems are available with annulus monitoring capabilities and can be supplied with a drill-cutting injection system.Rigid Lock Stack Down SystemThe FMC UWD-15 Rigid Lock Stack Down (RLSD) System is ideal for drilling through formationswhere unconsolidated shallow water flow exists and an additional casing string is needed to isolate the zone. The RLSD allows for the addition of a 26” casing string without changing standard drilling procedures or components required for running subsequent casing strings. A Rigid Lock Seal Assem-bly (RLSA) installed between the 36” and 20” casing strings contains any shallow water flow that may be present. The RLSD preloaded system handles the higher bending, fatigue and torsional loads gener-ated by TLP, Spar, DP drill ship and DP semi-sub-mersible applications. The RLSD system, with or without a 26” conductor, is recommended for water depths up to 10,000 feet.Large Bore Wellhead SystemThe FMC Large Bore Wellhead System (LBWS) is an extension of the Rigid Lock Stack Down (RLSD) System product line, with additional provision to run two casing strings (18” and 16”) which are suspended submudline. The LBWS includes addi-tional trip-saving tools, such as single trip tools for the submudline equipment and bore protectors that are run and retrieved with the drill string, which save the operator additional trips.The FMC Large Bore 2M (LB-2M) Wellhead System is an extension of the UWD-15 Large Bore Wellhead System. The LB-2M System features casing hangers and running tools designed to carry additionalcasing load at the systems working pressure. The 16” submudline casing hanger, with a two million pounds (2M lbs.) high capacity hanger system has a 10,000 psi working pressure rating. The 2M lbs. high capacity 13-5/8” casing hanger lands inside the high pressure housing and is rated for 15,000 psi working pressure.The LB-2M high pressure wellhead housing utilizes the same internal profile as the Standard Large Bore system.This allows FMC to continue to use the same field provencasing hanger and seal technol-ogy that is used throughout the UWD-15 Subsea Wellhead family. The fully qualified UWD-15 multi-function running tools and bit run/retrieve wear bushings are fully compatible with the LB-2Msystem.Stackable Casing HangersSuper Flowby DrillAhead Tool Metal-to-Metal Seals13-5/8” Slimbore14-3/4” Slimbore16-3/4” SlimboreUWD-10 Subsea Wellhead Systems Modular, Stackable DesignThe UWD-10 Subsea Wellhead System is designedfor a complete range of drilling and productionscenarios in shallow or deepwater with subsea orsurface BOPs. Designed for drilling and productionapplications, Slimbore Systems are suitable for H2SFMC Technologies presents the UWD-10 Slimbore System, with smaller bore diam-eters for slender well designs. The UWD-10 system is based on the same world-proven technology as the UWD-15 systems. The Slimbore wellhead allows the use of reduced diameter riser systems for drilling and production applications. This makes it possible for early generation drilling vessels to drill in deeper water and floating production facilities can increase the quantity of production risers tied back to the host platform.service and are available with 16-3/4”, 14-3/4” and13-5/8” nominal bore diameters. Each system has arigidizing mechanism to provide enhanced fatigueresistance. The modular design enable use of manyof the same open water tools that are used acrossboth the UWD-20 and UWD-15 product families.6714-3/4” Slimbore SystemThe 14-3/4” Slimbore System is designed to use standard UWD-15 RLSD System components whenever possible. This decreases the operator’s cost while increasing system reliability and equip-ment availability. The RLSA is installed between the 36” and 20” casing to contain shallow water flow and create preload for improved fatigue life of the system. The high pressure wellheadhousing has two active landing shoulders for casing hangers inside the housing, as well as a 13-3/8” submudline casing hang-er and receptacle.13-5/8” Slimbore SystemThe 13-5/8” UWD–10 Slimbore System is uniquely designed to accommodate slender well designs and production with vertical subsea trees, allowing the slimbore tubing hanger to be installed in the well-head, and alleviating the require-ment for a tubing head. The high pressure wellhead housing can be configured with either two casing hangers landing in the wellhead or one casing hanger with one tubinghanger inside the housing.Specialized Tools Save Trips, Time and MoneyBased on the design of the industry-leading UWD-15 running tools, UWD-10 Slimbore Systems continue the tradition of providing multi-function running and test tools, plus bit installable/retrievable wear bushings and bore protectors. The UWD-10 tools provide the option of running and retrieving components either individually or in combination, resulting in less required tools than any competitive slimbore subsea drilling system.16-3/4” Slimbore SystemThe 16-3/4” Slimbore System features a passive load shoulder in the high pressure wellhead for landing and stacking the casing hangers. This system builds on the field-proven designs ofFMC’s weight-set metal-to-metal seal assembly and integral rigid lock mechanism. The integral rigid lock mechanism creates preload between the low pressure and high pressurewellhead housings. This preload provides improved fatigue life,allowing for higher bending and torsional loads generated by TLP, Spar, DP drill ship and DP semi-submersibleapplications.14” Single Trip ToolIntegral Rigid Lock High Pressure Housing11-3/4” Casing Hanger for the 14-3/4”Slimbore systemActive LoadShoulder and Seal with the 11-3/4”HangerIntegral Rigid Lock and Stackable HangerTubing HangerProfile8UWD-HC Subsea Wellhead SystemsFMC’s High Capacity Subsea Wellhead Systems are engineered to meet the increas-ing capacities and pressures in the subsea drilling environment. The FMC UWD-HC family is based on the field proven UWD-15 wellhead systems including the use of fewer running and test tools. FMC’s high capacity tools are designed to handle higher capacities while performing multi-functions.HC-20 System• 4M lbs. Wellhead String Capacity • 20K Rated Wellhead• Rated for 350o F Temperature Rating • 30” or 27” H4 Mandrel • Super Heavy Duty Rigid Lock Seal Assembly (SHD RLSA)9HC-15Incorporating the same features as the HC-20 system, the HC-15 Systems including the Super Heavy Duty Rigid Lock Mechanism, low pressure housing designed for 42” or 38” conductor pipe, intermediate open watercasing strings of 32” or 30” and 28” or 26”, and the samemetal-to-metal seal assemblies and submudline equipment.However, the high pressure wellhead housing incorporates the more commonly found connection profile, the H4, instead of the Super Heavy Duty H4 connection. The wellhead is rated to a 4M lbs. string capacity with a 15,000 psi operating pressure.HC-20The FMC 20,000 psi High Capacity Wellhead System (HC-20) has advanced the traditions of excellence by integrating performance features of the field proven UWD-15 wellhead family such as the modular design and weight-set, metal-to-metal seal design. The HC-20 system has an improved wellhead housing design providing for additional casing strings and increased capabilities in high-pressure and deepwater applications.FMC’s HC-20 wellhead has an increased casing string capacity of 4M lbs. with each active shoulder capable of handling 2M lbs. plus the maximum BOP pressure test load. This extensive capacity permits our customers to drill deeper wells with longer and heavier casing strings. This innovative HC wellhead sys-tem, with a 20,000 psi working pressure, allows the 42” x 22”annulus to be completely cemented back to the mudline providing a stronger structural foundation. The design of the HC-20 system also allows the 16” casing hanger to be landed submudline or in the 1st hanger position in the wellhead.The HC-20 System includes the Super Heavy Duty Rigid Lock Seal Assembly which rigidizes the low pressure housing to the high pres-sure housing to create a 2.5M lbs. preloaded system. This capacity grants a higher fatigue and torsional resistance to handle the loads generated by TLP, SPAR, DP drill ships and DP semi-submersiblevessels in deepwater applications.High Capacity Wellhead Interface with Open Water Casing StringsHigh Capacity First Hanger Position Active Load ShoulderSHD Rigid Lock Seal Assembly Interface with Low and HighPressure HousingSHD RLSASpecialty ToolsRotary Table Adapter Bushing (RTAB)• The Rotary Table AdapterBushing (RTAB) isdesigned to hang-off aRigid Lock or Large BoreWellhead and 22”/20”casing string in theRotary Table to make-upthe Cam Tool and RLSARunning Tool afterrunning the inner string.• Top of wellhead is lowenough to promote a safeworking environmentthat allows the innerstring to be made up withthe iron roughneck.• Sets in 49-1/2” RotaryTable Master Bushing18” & 16” Hang Off Plate• 18” & 16” Casing Hanger Hang Off Plate(CHHOP) is designed to hang-off LBSubmudline hangers in the rotary so theSingle Trip Tool can beremoved to run innerstring.• The recessed 18”/16”hanger promotes ansafe working environ-ment to run the innerstring.• CHHOP is rated to 1Mlbs.; the CHHOP usedin conjuction with theLB-2M 16” hanger israted to 2M lbs.Nested Wear Bushing• Three part bit retrievable 13” WearBushing runs on 10-1/2” stabilizer.• Centralize drill string duringdrilling operation to promote wearon replaceable upper body.• Outer bushing can be either left inor removed from the wellheadduring each trip out of wellhead.• Inner bushing is pulled each tripout of wellhead.• Spring loaded tool can be used assecondary means of running andretrieving the nested wellhead. Open Water Casing Hanger Measurement Tool, Lockdown Bushing (LDB) and LDB Running and Retrieval Tool• Designed for running in openwater from a work boat to reduceinstallation cost.• Increases accuracy of measuringthe hanger position within thewellhead.• Utilizes a ROV to install, themeasurement tool and read digitaloutputs from sensors.• ROV locks the LDB to the wellheadby stroking an energizing mandrelto engage the load ring to the highpressure housing.• Tests metal-to-metal seal on LDB.For Increased Installation Efficiencyapter BushingRotary TableAdapter Bushing 18” & 16” Hang Off PlateNested WearBushing15K LDB Runningand Retrieval Tool10UWD-10 System ComparisonUWD-15 & UWD-HC System ComparisonUWD-15 Standard UWD-15 Rigid Lock UWD-15 Large Bore HC-2011FMC Technologies1777 Gears RoadHouston, TX 77067281 591 4000www.fmct /subseadrilling©Copyright 2008, FMC Technologies, Inc.。
FMC640 快速手册说明书
Table of ContentsKnow your device (3)Pinout (4)Wiring scheme (5)Set up your device (6)How to insert Micro-SIM card and connect the battery (6)PC Connection (Windows) (7)How to install USB drivers (Windows) (7)Configuration (Windows) (7)Quick SMS configuration (9)Mounting recommendations (10)LED indications (11)Characteristics (11)Basic characteristics (11)Electrical characteristics (13)Safety information (14)Certification and Approvals ....................................................... 15Warranty .. (16)Warranty Disclaimer (16)Know your deviceFigure 1 FMC640 device viewPinoutPin n umber Pin n ame Description1 GND (-) Ground2 CAN 1L SAE J1939 CAN interface Low channel 13 1WIRE POWER Power supply pin for Dallas 1-Wire® devices4 DIN4 Digital input, channel 15 DIN2 Digital input, channel 26 CAN 2L SAE J1939 CAN interface Low channel 27 AIN2 Analog input, channel 2. Input range: 0-30V/0-10V DC8 DOUT3 Digital output. Open collector output9 DOUT2 Digital output. Open collector output10 AIN3 Analog input, channel 3. Input range: 0-30V/0-10V DC11 VCC (+) Power supply (+10-30 V DC)12 CAN 1H SAE J1939 CAN interface High channel 113 1WIRE DATA Data channel for Dallas 1-Wire® devices14 DIN3 Digital input, channel 315 IGN (DIN1) Digital input, channel 1. DEDICATED FOR IGNITION INPUT16 CAN 2H SAE J1939 CAN interface High channel 217 AIN1 Analog input, channel 1. Input range: 0-30V/0-10V DC18 DOUT4/AIN4 Digital output. Open collector output OR Analog input, channel 4. Input range: 0-30V/0-10V DC19 DOUT1 Digital output. Open collector output20 K-Line K-LINE interface for online Tachograph VehicleData transferFigure 2 FMC640 pinoutWiring scheme1Figure 3 FMC640 Wiring scheme 1 Automotive relaySet up your deviceHow to insert SIM card and connect the battery1. Unscrew 4 screws counterclockwise that are located on the bottom of the device.2. Remove the cover .3. Insert SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator . Make sure that SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.4. Connect battery as shown to device.5. After configuration , see “PC Connection (Windows)”, attach device cover back.6. Screw in all screws. Device is ready to be mounted.Figure 8 Attaching cover backFigure 9 Device is readyFigure 6 SIM card insertFigure 7 Battery connectionFigure 4 Unscrew screwsFigure 5 Cover removalPC Connection (Windows)1.Power-up FMC640 with DC voltage (10 – 30 V) power supplyusing power wires. LED’s should start blinking, see “LEDindications”.2.Connect device to computer using Micro-USB cable:▬You will need to install USB drivers, see “How to install USB drivers (Windows)”3.You are now ready to use the device on your computer. How to install USB drivers (Windows)1.Please download COM port drivers from here.2.Extract and run TeltonikaCOMDriver.exe.3.Click Next in driver installation window.4.In the following window click Install button.Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup. Configuration (Windows)At first FMC640 device will have default factory settings set. These settings should be changed according to the user's needs. Main configuration can be performed via Teltonika Configurator software. Get the latest Configurator version from here. Configurator operates on Microsoft Windows OS and uses prerequisite Framework. Make sure you have the correct version installed.Table 1 MS .NET requirementsDownloaded Configurator will be in compressed archive. Extract it and launch Configurator.exe. After launch software language can be changed by clicking in the right bottom corner (Figure 10 Language selection).Configuration process begins by pressing on connected device (Figure 11 Device connected via USB ).After connection to Configurator Status window will be displayed (Figure 12 Configurator Status window ).Various Status window tabs display information about GNSS , GSM , I/O , Maintenance and etc. FMC640 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button. Main buttons offer following functionality: 1. Load from device – loads configuration from device. 2. Save to device – saves configuration to device. 3.Load from file – loads configuration from file. 4. Save to file – saves configuration to file.5. Update firmware – updates firmware on device.6. Read records – reads records from the device.7. Reboot device – restarts device.8.Reset configuration – sets device configuration to default.Most important configurator section is GPRS – where all yourserver and GPRS settings can be configured and Data Acquisition – where data acquiring parameters can be configured.More details about FMC640 configuration using Configurator can be found in our Wiki .Figure 11 Device connected via USBFigure 10 Language selectionFigure 12 Configurator Status windowQuick SMS configurationDefault configuration has optimal parameters present to ensure best performance of track quality and data usage.Quickly set up your device by sending this SMS command to it:Note: Before SMS text, two space symbols should be inserted. GPRS settings:•2001 – APN•2002 – APN username (if thereare no APN username, emptyfield should be left)•2003 – APN password (if thereare no APN password, emptyfield should be left)Server settings:•2004– Domain•2005 – Port•2006 – Data sending protocol(0 – TCP, 1 – UDP) Default configuration settingsMovement and ignition detection:Vehicle movement willbe detected byaccelerometerIgnition will be detectedby vehicle power voltagebetween 13,2 – 30 V Device makes a record On Moving if one of these events happen: 300 seconds passes Vehicle turns 10 degreesVehicle drives 100metersSpeed differencebetween last coordinateand current position isgreater than 10 km/h Device makes a record On Stop if:1 hour passes whilevehicle is stationaryand ignition is offRecords sending to server:If device has made arecord it is sent to theserver every 120secondsAfter successful SMS configuration, FMC640 device will synchronize time and update records to configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters." setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0;"Mounting recommendations•Connecting Wires▬Wires should be connected while module is not plugged in.▬Wires should be fastened to the other wires or non-moving parts. Try to avoid heat emitting and moving objects nearthe wires.▬The connections should not be seen very clearly. If factory isolation was removed while connecting wires, it should beapplied again.▬If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc.,additional isolation should be applied.▬Wires cannot be connected to the board computers or control units.•Connecting power source▬Be sure that after the car computer falls asleep, power is still available on chosen wire. Depending on car, this mayhappen in 5 to 30 minutes period.▬When module is connected, be sure to measure voltage again if it did not decrease.▬It is recommended to connect to the main power cable in the fuse box.▬Use 3A, 125V external fuse. •Connecting ignition wire▬Be sure to check if it is a real ignition wire – power does not disappear while starting the engine.▬Check if this is not an ACC wire (when key is in the first position, most electronics of the vehicle are available).▬Check if power is still available when you turn off any of vehicles devices.▬Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output, whenignition is on, may be chosen.•Connecting ground wire▬Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.▬If the wire is fixed with the bolt, the loop must be connected to the end of the wire.▬For better contact scrub paint from the place where loop is connected.PAY ATTENTION! Connecting the power supply must becarried out in a very low impedance point of on-boardvehicle network. Connecting the GND at an arbitrarypoint to the mass of the car is unacceptable, as staticand dynamic potentials on the line GND will beunpredictable, which can lead to unstable FMC640operation and even its failure.LED indications Table 2 Navigation LED indicationsTable 3 Status LED indicationsCharacteristics Basic characteristics Table 4 Basic characteristicsTable 5 Electrical characteristicsSafety informationThis message contains information on how to operate FMC640 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!•The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10...+30 V DC.•To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. Theyshow the status of device operation.•When connecting the 2x10 connector cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.•Before dismounting the device from the vehicle, the 2x10 connector must be disconnected.•The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 62368-1 standard.•The device FMC640 is not designed as a navigational device for boats.Do not disassemble the device. If the device is damaged, the power supply cables are notisolatedor the isolation is damaged, DO NOTtouch the device before unplugging the powersupply.All wireless data transferring devices produce interference that may affect other devices which are placed nearby.The device must be connected only by qualified personnel.The device must be firmly fastened in a predefined location.The programming must be performed using a PC with autonomic power supply.Installation and/or handling during a lightning storm is prohibited.The device is susceptible to water and humidity.Certification and Approvals• FMC640 CE / RED • FMC640 E-Mark • FMC640 REACH•FMC640 Declaration of IMEI assignment• FMC640 Declaration of device operation temperatureThis sign on the package means that it is necessary to read the User ‘s Manual before your start using the device. Full User ‘sManual version can be found in our Wiki.This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.Hereby, Teltonika declare under our sole responsibility that the above described product is in conformity with the relevant Community harmonization: European Directive 2014/53/EU (RED).WarrantyTELTONIKA guarantees its products to be free of any manufacturing defects for a period of 24 months. With additional agreement we can agree on a different warranty period, for more detailed information please contact our sales manager.Contact us /about-us/contacts/All batteries carry a reduced 6 month warranty period.If a product should fail within this specific warranty time, the product can be:•Repaired•Replaced with a new product•Replaced with an equivalent repaired product fulfilling the same functionality•TELTONIKA can also repair products that are out of warranty at an agreed cost.Warranty DisclaimerTELTONIKA PRODUCTS ARE INTENDED TO BE USED BY PERSONS WITH TRAINING AND EXPERIENCE. ANY OTHER USE RENDERS THE LIMITED WARRANTIES EXPRESSED HEREIN AND ALL IMPLIED WARRANTIES NULL AND VOID AND SAME ARE HEREBY EXCLUDED. ALSO EXCLUDED FROM THIS LIMITED WARRANTY ARE ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR REVENUE, LOSS OF TIME, INCONVENIENCE OR ANY OTHER ECONOMIC LOSS.More information can be found at teltonika-iot-/warranty-repair/。
ACQ480FMCAdvanceProductSpecification-D-TACQ…
ACQ480FMCAdvance Product SpecificationHigh Performance Simultaneous Data AcquisitionPreliminary Product InformationSubject to ChangeRev 4Page 1 of 7Date: 2 February 2015Table of Contents1 Product Description (3)1.1 Product Variants (3)1.2 Applications (3)1.3 Overview (3)1.4 Glossary (4)2 Physical (5)2.1 Dimensions (5)2.2 Appearance (5)3 Interface Specification (6)3.1 Front Panel Connectors (6)4 ACQ480FMC Electrical Specification (6)5 ACQ480FMC Specification (7)Rev 4Page 2 of 7Date: 2 February 20151 Product Description1.ACQ480FMC is an 8 channel simultaneous analog input module.2.Standard configuration: 8 channels, 50MSPS/channel.plies with VITA57FMC standard, LPC version.4.Single-ended input on MMCX connectorpliant with D-TACQ ELF sites.1.1 Product Variants•ACQ480FMC-8-50 : 8 channels, 14 bit resolution, 50MSPS/channel•ACQ480FMC-4-80 : 4 channels, 14 bit resolution, 80MSPS/channel1.2 Applications•Radar, Radio Reflectometry, high speed ultrasound and diagnostics..1.3 OverviewThe FMC module standard adds user IO to carrier modules fitted with FPGA resource. D-TACQ recommends modules based on the Xilinx ZYNQ system on chip, combining FPGA resource with a dual-core ARM Cortex A9 and gigabit Ethernet. Compatible carriers include:•D-TACQ ACQ1001 : D-TACQ single slot FMC carrier, Z7020•D-TACQ ACQ1002 : D-TACQ dual slot FMC carrier, Z7020•D-TACQ ACQ2106 : D-TACQ 6 slot FMC carrier, Z7030D-TACQ supplies a complete working Intelligent Digitizer appliance including programmable logic and microprocessor system running Linux. Evaluation boards are useful for evaluation, but for production use D-TACQ recommends use of a production-quality carrier such as ACQ1001.Rev 4Page 3 of 7Date: 2 February 20151.4 Glossary•FMC: VITA57 FPGA Mezzanine Card.•Xilinx ZYNQ Soc•FPGA : Field Programmable Gate Array.•LPC : FMC Low pin count wiring standard.•ULPC: FMC Ultra low pin count (D-TACQ).•ULPC+ D-TACQ Ultra low pin count with LVDS•Extended, E : FMC Extended size module (D-TACQ).Rev 4Page 4 of 7Date: 2 February 20152 Physical2.1 Dimensions2.2 AppearanceRev 4Page 5 of 7Date: 2 February 20153 Interface Specification.3.1 Front Panel Connectors•10 x MMCX connectors•8 channel input•External CLK, TRG4 ACQ480FMC Electrical Specification.#Parameter Value1Number of Channels4/82Sample Rate80 MSPS/50 MSPS,per channel simultaneous3Resolution14 bits4Coupling DC, Single-Ended Input5Input Impedance1M, [50 Ώ option]6Input Voltage Range ±2.5V(default, other factory options) 7Input Voltage Withstand±30V8Offset Error±3 mV9Gain Error±2 mV10INL±1 LSB11DNL±0.5 LSB12CMRR TBD13THD TBD14SINAD71 dB typical15SFDR85 dBc typical16SNR72 dB typical17Full Power BW40 MHz @ 2Vpp18Small Signal BW80 MHzCrosstalk<90 dB @ 1 kHz FS InputTemperature Stability<25 ppm/CRev 4Page 6 of 7Date: 2 February 20155 ACQ480FMC Specification#Parameter Value1Form Factor Standard FMC2Power source External DC 12V (0V output), 100mAExternal DC 3.3V, 500 mA3Environmental0ºC-50ºC Operational-10ºC-85ºC Non-Operational4FMC Socket Standard FMC, Low Pin Count LPC5Digital Signal IO CLK, TRG inputs 5V TTLRev 4Page 7 of 7Date: 2 February 2015。
HDMI输入 输出FMC模块与摄像头接口（FMC-HDMI-CAM）产品简介说明书
HDMI Input/Output FMC module with Camera Interface (FMC-HDMI-CAM) Getting Started:1. Navigate to the following product page: /fmc-hdmi-cam2. Click on the “Support Files & Downloads” button3. Login to the web site:a. If you already have an account, specify credentials and click the Login buttonb. To create a new account, specify a valid e-mail and click the Register button4. Download the FMC-HDMI-CAM Getting Started Guide5. Extract all files and follow instructions in the extracted Getting Started GuideFeatures:• HDMI Input: HDMI Input, featuring Analog Devices ADV7611• HDMI Output: HDMI Output, featuring Analog Devices ADV7511• Video Clock: Video clock synthesizer, featuring TI CDCE913•Camera Input:Camera connector, supporting several optional camera modulesLICENSE AGREEMENTTHE AVNET DESIGN KIT (“DESIGN KIT” OR “PRODUCT”) AND ANY SUPPORTING DOCUMENTATION (“DOCUMENTATION” OR “PRODUCT DOCUMENTATION”) IS SUBJECT TO THIS LICENSE AGREEMENT (“LICENSE”). USE OF THE PRODUCT OR DOCUMENTATION SIGNIFIES ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS LICENSE. THE TERMS OF THIS LICENSE AGREEMENT ARE IN ADDITION TO THE AVNET CUSTOMER TERMS AND CONDITIONS, WHICH CAN BE VIEWED AT . THE TERMS OF THIS LICENSE AGREEMENT WILL CONTROL IN THE EVENT OF A CONFLICT.1. Limited License. Avnet grants You, the Customer, (“You” “Your” or “Customer”) a limited, non-exclusive, non-transferable, license to: (a) use the Product for Your own internal testing, evaluation and design efforts at a single Customer site; (b) create a singlederivative work based on the Product using the same semiconductor supplier product or product family as used in the Product; and (c) make, use and sell the Product in a single production unit. No other rights are granted and Avnet and any other Product licensor reserves all rights not specifically granted in this License Agreement. Except as expressly permitted in this License, neither the Design Kit, Documentation, nor any portion may be reverse engineered, disassembled, decompiled, sold, donated, shared, leased, assigned, sublicensed or otherwise transferred by Customer. The term of this License is in effect until terminated. Customer may terminate this license at any time by destroying the Product and all copies of the Product Documentation.2. Changes. Avnet may make changes to the Product or Product Documentation at any time without notice. Avnet makes no commitment to update or upgrade the Product or Product Documentation and Avnet reserves the right to discontinue the Productor Product Documentation at any time without notice.3. Limited Warranty. ALL PRODUCTS AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND. AVNET MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS AND DOCUMENTATION PROVIDEDHEREUNDER. AVNET SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF ANY THIRD PARTY WITH REGARD TO THE PRODUCTS AND DOCUMENTATION.4. LIMITATIONS OF LIABILITY. CUSTOMER SHALL NOT BE ENTITLED TO AND AVNET WILL NOT LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE, INCLUDING, WITHOUT LIMITATION, BUSINESSINTERRUPTION COSTS, LOSS OF PROFIT OR REVENUE, LOSS OF DATA, PROMOTIONAL OR MANUFACTURING EXPENSES, OVERHEAD, COSTS OR EXPENSES ASSOCIATED WITH WARRANTY OR INTELLECTUAL PROPERTY INFRINGEMENT CLAIMS, INJURY TO REPUTATION OR LOSS OF CUSTOMERS, EVEN IF AVNET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE PRODUCTS AND DOCUMENTATION ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN MEDICAL, MILITARY, AIR CRAFT, SPACE OR LIFE SUPPORT EQUIPMENT NOR IN APPLICATIONS WHERE FAILURE OR MALFUNCTION OF THE PRODUCTS CAN REASONABLY BE EXPECTED TO RESULT IN A PERSONAL INJURY, DEATH OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OR USE OF PRODUCTS IN SUCH EQUIPMENT OR APPLICATIONS, WITHOUT PRIOR AUTHORIZATION IN WRITING OF AVNET, IS NOT PERMITTED AND IS AT CUSTOMER’S OWN RISK. CUSTOMER AGREES TO FULLY INDEMNIFY AVNET FOR ANY DAMAGES RESULTING FROM SUCH INCLUSION OR USE.5. LIMITATION OF DAMAGES. CUSTOMER’S RECOVERY FROM AVNET FOR ANY CLAIM SHALL NOT EXCEED CUSTOMER’S PURCHASE PRICE FOR THE PRODUCT GIVING RISE TO SUCH CLAIM IRRESPECTIVE OF THE NATURE OF THE CLAIM, WHETHER IN CONTRACT,TORT, WARRANTY, OR OTHERWISE.6. INDEMNIFICATION. AVNET SHALL NOT BE LIABLE FOR AND CUSTOMER SHALL INDEMNIFY, DEFEND AND HOLD AVNET HARMLESS FROM ANY CLAIMS BASED ON AVNET’S COMPLIANCE WITH CUSTOMER’S DESIGNS, SPECIFICATIONS OR INSTRUCTIONS,OR MODIFICATION OF ANY PRODUCT BY PARTIES OTHER THAN AVNET, OR USE IN COMBINATION WITH OTHER PRODUCTS.7. U.S. Government Restricted Rights. The Product and Product Documentation are provided with “RESTRICTED RIGHTS.” If the Product and Product Documentation and related technology or documentation are provided to or made available to the United StatesGovernment, any use, duplication, or disclosure by the United States Government is subject to restrictions applicable to proprietary commercial computer software as set forth in FAR 52.227-14 and DFAR 252.227-7013, et seq., its successor and other applicable laws and regulations. Use of the Product by the United States Government constitutes acknowledgment of the proprietary rights of Avnet and any third parties. No other governments are authorized to use the Product without written agreement of Avnet and applicable third parties.8. Ownership. Licensee acknowledges and agrees that Avnet or Avnet’s licensors are the sole and exclusive owner of all Intellectual Property Rights in the Licensed Materials, and Licensee shall acquire no right, title, or interest in the Licensed Materials,other than any rights expressly granted in this Agreement.9. Intellectual Property. All trademarks, service marks, logos, slogans, domain names and trade names (collectively “Marks”) are the properties of their respective owners. Avnet disclaims any proprietary interest in Marks other than its own. Avnet and AVdesign logos are registered trademarks and service marks of Avnet, Inc. Avnet’s Marks may be used only with the prior written permission of Avnet, Inc.10. General. The terms and conditions set forth in the License Agreement or at will apply notwithstanding any conflicting, contrary or additional terms and conditions in any purchase order, sales acknowledgement confirmation or otherdocument. If there is any conflict, the terms of this License Agreement will control. This License may not be assigned by Customer, by operation of law, merger or otherwise, without the prior written consent of Avnet and any attempted or purported assignment shall be void. Licensee understands that portions of the Licensed Materials may have been licensed to Avnet from third parties and that such third parties are intended beneficiaries of the provisions of this Agreement. In the event any of the provisions of this Agreement are for any reason determined to be void or unenforceable, the remaining provisions will remain in full effect.This constitutes the entire agreement between the parties with respect to the use of this Product, and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No waiver or modification is effective unless agreed to in writing and signed by authorized representatives of both parties. The obligations, rights, terms and conditions shall be binding on the parties and their respective successors and assigns. The License Agreement is governed by and construed in accordance with the laws of the State of Arizona excluding any law or principle, which would apply the law of any other jurisdiction. The United Nations Convention for the International Sale of Goods shall not apply.Copyright © 2015, Avnet, Inc. All rights reserved. Published by Avnet Electronics Marketing, a group of Avnet, Inc. Avnet, Inc. disclaims any proprietary interest or right in anytrademarks, service marks, logos, domain names, company names, brands, product names, or other form of intellectual property other than its own. AVNET and the AV logos areregistered trademarks of Avnet, Inc. LIT #QSC-AES-FMC-HDMI-CAM-G-V1。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
联苯菊酯(天王星)
2009.04.05
LS20051932
硫线磷(克线丹)
2009.05.22
PD287-99
氯氰菊酯(安绿宝)
2009.07.07
PD289-99
克百威(呋喃丹)
2009.07.07
PD292-99
异噁草松(广灭灵)
2009.07.07
PD288-99
顺式氯氰菊酯(百事达)
2009.07.07
PD284-99
丁硫克百威(好年冬)
2009.07.07
PD342-2000
丁硫克百威(好年冬)
2010.06.09
PD335-2000
硫线磷(克线丹)
2010.06.09
PD234-98
克百威(呋喃丹)
2010.07.29
PD20050157
zeta-氯氰菊酯
2010.10.12
PD20060020
唑草酮
2011.01.09
PD20060021
唑草酮(快灭灵)
2011.01.09
PD20060030
丁硫克百威(好年冬)
2011.01.25
PD20060031
zeta-氯氰菊酯(富锐)
2011.01.25
PD11-86
克百威(呋喃丹)
2011.03.08
PD49-87
氯氰菊酯(安绿宝)
2008.11.03பைடு நூலகம்
WL98607
顺式氯氰菊酯
2008.12.31
WL98609
zeta-氯氰菊酯
2008.12.31
WL98608
氯菊酯
2008.12.31
WL20005
氯菊酯(富力士)
2008.12.31
LS20040107
唑草酮
2009.01.13
PD96-89
联苯菊酯(天王星)
2009.03.23
2012.05.31
PD194-94
丁硫克百威(好年冬)
2012.08.14
PD20070528
异噁草松(广灭灵)
2012.11.28
PD176-93
硫线磷(克线丹)
2013.04.09
WP20080069
氯菊酯(富力士)
2013.05.09
FMCproduct list
登记且在有效期内的产品列表
登记证号码
产(商)品名称
有效截止日
参考价格
PD78-88
克百威(呋喃丹)
2008.09.03
PD81-88
100克/升联苯菊酯乳油(天王星)
2008.09.03
PD84-88
顺式氯氰菊酯(百事达)
2008.10.13
PD184-93
480克/升异噁草松乳油(广灭灵)