IMM5562E

合集下载

Google Pixel 6 Pro 128GB 说明书

Google Pixel 6 Pro 128GB 说明书

Google Pixel 6 Pro 128GBGoogle Tensor Application Processor PoP(Tensor AP + Micron 12 GB LPDDR5 MT62F1536M64D8CH-031 WT:A)Kioxia 128 GB NAND Flash MemorySamsung SHANNON A5123 5G ModemSamsung SHANNON 5511 RF TransceiverMaxim MAX77759A PMICSTMicroelectronics NFC Controller ST54KMaxim MAX20339EWB Surge protection ICNXP PCA9468 Battery Charger ICSTMicroelectronics MCU ST33J2M0Google H1D3M Titan M security processorSamsung Exynos SM 5800 Supply Modulator (2 pcs)Cirrus Logic CS35L41B Audio Amplifier (2 pcs)Cirrus Logic CS40L25 Audio Amplifier HapticBroadcom BCM47765 GNSS Receiver ICFigure 1. Google Pixel 6 Pro Board ShotSkyworks SKY53737 FEMSkyworks SKY58260-11 FEMSamsung Exynos SM 5800 Supply ModulatorQorvo QM77080 FEMSkyworks SKY53738 FEM (3 pcs)Skyworks SKY77652-31 PAMSamsung Shannon 5311A PMICIDT P9412 Wireless Charing Receiver ICSamsung PMIC S2MPG10Samsung PMIC S2MPG11Unknown, Wi-Fi/BT Module (likely)Figure 2. Google Pixel 6 Pro Board ShotGoogle Tensor Application ProcessorGoogle’s semi-custom application processor is all about AI. Google built a custom deep learning accelerator (DLA) to challenge Qualcomm and Samsung in inferencing. The custom DLA features 16 (4x4) instantiations of systo lic arrays that outscore both Qualcomm and Samsung on ETH Zurich’s AI-Benchmark. While impressive, AI-Benchmark only tells half the story since it heavily relies on FP16 for inferencing. Most mobile AI network designers like to use INT8 for their layers because of the increased energy efficiency and comparable accuracy. For INT8 processing, the Pixel’s DLA lags both Qualcomm and Samsung in object detection, image segmentation, and image classification according to MLPerf 1.0.1 results.Figure 3. Google Deep Learning Accelerator (DLA)TechInsights' lab team has done a great job in getting the Google Tensor processor die photos quickly. The Tensor die has a die size (seal) of 10.38mm x 10.43mm = 108.26mm2 and is fabbed on Samsung's5nm process node technology. The following images show die marks and the die photo.Figure 4. Google Tensor Die MarkingsFigure 5. Google Tensor Package MarkingsThe die mark “S5P9845” conforms to the traditional Samsung Exynos processor naming rule, where the Exynos 990 Application Processor has the die marks of S5E9830, the Exynos 2100 5G SoC has die marks of S5E9840, and the Exynos 1080 5G SoC has S5E9815.We have heard of possible ties between the Google Tensor and Samsung Exynos processors, and our analysis of the Tensor die continues. It does appear that the foundry supplier for the Tensor die is Samsung. We will confirm the process node soon, which we ex pect is in Samsung’s 5LPE.Figure 6. Google Tensor Die PhotoSecurityGoogle designed the Titan M2, which is a custom RISC-V controller, to support Android Strongbox, securely generating keys, storing passwords, and protecting PINs. The company tested and certified its Titan chip through an external evaluation lab, achieving AVA_VAN.5 certification—one of the highest levels for smartphones.Mobile RF Components in the Google Pixel 6 ProOn the mobile RF front, the Pixel 6 brings about some key new developments:∙Google / Samsung ties in the Tensor: Now that we have spent some time examining the Google Tensor SoC, we have analyzed the device tree file system of the Linux kernel for Google Pixel 6, and it shows that some blocks of the Google GS101 Tensor processor are shared with Samsung’s Exynos.∙ A first for the US market: Samsung has developed a full 5G radio solution, which is included in the Pixel 6, making this the first major 5G phone in the US that does not include a Qualcommmodem.Looking forward, we note that Oppo is looking to develop their own SoC solutions for higher end phones - is Qualcomm’s dominance in this space diminishing?UWB ConnectivityConfirmed: the Google Pixel 6 Pro supports UWB connectivity, operating between 6489.6 MHz and 7987.2 MHz. Similar to the Galaxy S21 Ultra UWB design, the Google Pixel 6 Pro has multiple UWB patch antennas. However, in Google Pixel 6 Pro, only one antenna is used to transmit, whereas in the Galaxy S21 Ultra, two UWB antennas are used to send UWB signals.Although the Google Pixel 6 Pro design has similar components to the Samsung Galaxy S20 and Galaxy S21 Ultra, the Teardown team identified a new Qorvo UWB component instead of the same NXP SR100T that was found in the Samsung Galaxy S21 Ultra.WiFi 6EAnother point of similarity between the Google Pixel 6 Pro and the Samsung Galaxy S21 Ultra: the Pixel supports WiFi 6. This, however, is not just a protocol advancement - it requires new hardware designs. So far, we can confirm that the WiFi 6E modules from both phones include the Broadcom WiFi 6E SoC.Samsung Design WinsWith the exception of the Google Tensor Application Processor - which is now in our , the phone's key components are from Samsung, including: Samsung SHANNON A5123 5G Modem, Samsung SHANNON 5511 RF Transceiver, SHANNON 5800 Envelope Tracker IC, Samsung SHANNON 5311A PMIC, And more! The Samsung SHANNON A5123 5G Modem is not new to us. We originally found it in the Galaxy S20 Ultra in early 2020, where it paired with the Samsung Exynos 990 Application Processor as a standalone 5G Modem.As we have confirmed that there is a standalone Samsung 5G Modem in the Pixel 6 Pro, it stands to reason that the Google Tensor is an Application Processor without integrated Modem functionality, but we have not seen the die photos yet - we will confirm when we do.The Samsung SHANNON 5511 RF Transceiver is not new to us either. We originally found it in Samsung Exynos 1080 and 2100 5G SoC platform smartphones, such as Vivo X60 and Samsung Galaxy S21 series in early 2021.Additional Design WinsIn Memory, the Google Pixel 6 Pro we have torn down has a Micron 12 GB LPDDR5 which should have 8 pieces die of Micron’s 1y nm 12 Gb LPDDR5.KIOXIA has won the NAND Flash slot.There is a standalone GNSS Receiver IC from Broadcom. The BCM47765 is the company’s second generation Dual-Frequency (L1+L5) GNSS chip. TechInsights has analyzed the first generationBCM47755.The Pixel 6 Pro supports NFC and Wi-Fi/BT functions too. We have identified two likely modules and will confirm them through further analysis.STMicroelectronics keeps the NFC slot design win with the same die that we have seen in the Google Pixel 4 and Pixel 4 XL. We have confirmed that inside the wireless combo IC module is the Broadcom BCM4389 Wi-Fi 6E and Bluetooth 5 wireless combo SoC, which we first saw in the Samsung Galaxy S21 Ultra 5G phone.Google Pixel 6 Pro US Model GA03149-USWe have now done a quick tear down on a Google Pixel 6 Pro GA03149-US, a United States model of the phone that supports 5G mmWave and Sub-6.Comparison with the Canadian model we have been examining shows that the US model has a Samsung mmWave RF Transceiver Exynos RF 5710. So Samsung is the second silicon supplier of the 5G NR mmWave cellular chipsets, alongside Qualcomm. TechInsights will be creating a series of reverse engineering reports on the Exynos RF 5710 for our Mobile RF Analysis subscribers.We have also found a Murata mmWave Module SS1707051 found in the US phone. We are currently working to identify the die inside.Figure 7. Samsung mmWave RF Transceiver Exynos RF 5710Figure 8. Dual mmWave antenna module from Murata。

纽芬兰省提名材料清单

纽芬兰省提名材料清单

纽芬兰省提名材料清单纽省提名表格1.I have read the NLPNP Skilled Worker Application Guide---SWG0012.Application---NLPNP-00023.Employmwnt Offer---NLPNP-0003(由雇主完成)4.Declaration of Personal Net Worth---NLPNP-0004(需要证实文件)联邦表格(所有的省提名申请者都必须完成并将以下表格放入纽省省提名申请中。

请上交复印件,自己保存原件。

)1.I have read the Application for Permanent Residence:Guidence for Provincial Nominees---IMM EP70002.Generic Application Form for Canada---IMM 00083.Additional Dependents/Declaration---IMM 0008DEP(如果有超过5个家属,则由主要申请者代表其填写)4.Schedule A Background/Declaration---IMM 56695.Principal Applicant6.Spouse or Common-Law Partner(如果适用)7.Any dependent children aged 18 or over(如果适用)8.Additional Family Information---IMM 5406(由所有符合申请条件的成员填写,无论其是否随行至加拿大)9.Principal Applicant10.Spouse or Common-Law Partner(如果适用)11.Any dependent children aged 18 or over(如果适用)12.Schedule 4:Economic Classes:Provincial Nominees---IMM 008 Schedule 413.Supplementary Information-Your Travels---IMM 556214.Fee Payment Form-Application for Permanent Residence---IMM 5620e of Representative---IMM 5476(如果适用)16.Document Checklist---IMM 569017.Separation Declaration for Minor Travelling to Canada---IMM 5604(如果适用)18.Statutory Declaration of Common-law Union---IMM 5409(如果适用)所需证实文件注意:如果申请者目前居住在提名省,则提名机构接收证实文件原件。

文件清单

文件清单

文件清单This document is available in PDF format only. You need to mail this form and other documents with your application. Pleasemake sure you print this document, complete it and include it in your application as the cover page.这个文件是PDF格式。

您需要邮寄此表格及其他文件与您的应用程序。

请确保您打印此文档,完成它,包括在你的应用作为封面页。

Gather your documents in the order of the checklist and check R each item. Attach small items such as photos and certifiedcheques with a paper clip, otherwise leave documents unbound. Place all documents in a sealed envelope. If your documentsare not in English or French, send a notarized (certified) translation with a copy of the original version. Do not send any additionaldocuments when submitting your application to the CIO.聚集在你的文件清单的顺序和检查R的每个项目。

附加小件物品,如照片和认证回形针的检查,否则留下的文件绑定。

放置在一个密封的信封中的所有文件。

如果您的文件是不是英语或法语,公证(认证)的翻译与原始版本的副本发送。

2011最新版1107更新三极管丝印MARK检索表对照查询表

2011最新版1107更新三极管丝印MARK检索表对照查询表

PZM16NB3 DTC144VUA FMMT5179 PZM18NB1 PZM18NB2 PZM18NB3 BC846A BC846AT BC846A BC846A BC846AW BC846AW FMMT3904 MMBT3904 IRLML2402 PMMT3904 PXT3904 PMMT3904 PMST3904 PMST3904 MMBT3904L BC846B BC846BT BC846B BC846B BC846BW BC846BW FMMT2222 MMBT2222 IRLML2803 PMBT2222 PMBT2222 PMST2222 PMST2222 BC817UPN BAP50-05 FMMT-A20 MMBTA20L IRLML6302 BC847S BC846 BC846 BC846W BC846W MMBTA42
类型 UC4 L UC4 L UC4 L UC4 UC4 I N L ZB L UC4 L UC4 UC4 L UC4 L UC4 L UC4 UC4 L UC4 L UC4 L UC4 C O X DP N N N A C C O DP
封装 UCSP-4 SC70-3 SC70-3 SC70-3 UCSP-4 SC70-3 UCSP-4 UCSP-4 SOD323 SOT23 SC70-3 UCSP-4 SOT23 SC70-3 UCSP-4 SC70-3 UCSP-4 UCSP-4 SC70-3 UCSP-4 SC70-3 UCSP-4 SC70-3 UCSP-4 UCSP-4 SC70-3 UCSP-4 SC70-3 UCSP-4 SC70-3 UCSP-4 SOT346 SOT89 SOT143 SOT363 SOT416 SOT23 SOT23 SOT346 SOT23 SOT346 SOT89 SOT363

电路板型号

电路板型号

延时电路板EL-T5226.00A ZS99-03-20-10DL 捣固油门电机控制板EL-T5882.02TE188-231000DL稳定油门电机控制板EL-T5630.02C TE188-361000DL 防锁定控制板EL-T5937.002TE188-232000DL 二极管板EL-T5234TET112-14-10-00DL电阻板EL-T5923TE188-101000DL 报警电路板EL-T5255.02b TET111-03-30-00DL 8通道记录仪求和放大板EL-5608.02a TE188-038/00DL40路模拟量选择控制板EK-207V-00a ZS99-04-35-10-2DL 五路测量信号选择板EL-T5721.02TE188-012100DL五路位置信号选择板EL-T5722.02TE188-012200DL四路差值信号选择板EL-T5889.02TE188-012400DL 模拟求和放大板EL-T5093.02a TE188-061000DL 四继电器板EL-T1163.00ZS99-02-30-20-ADL五继电器板EL-T5096.00ZS107-05-10-00DL延时继电器板EL-T5227.00TET111-08-30-10DL+5V电源板EL-805SV-00D TET112-01-31-00DL ±15V,±10V,+5V EL-819SV-01D TE188-032300DL捣固程控主机板EK-650PX-00TE188-055400DL 子程序板EK-651P-00TET121-01-41-00DL 程控输入输出板EK-653P-00TET112-01-33-00DL 程控定时器EK-657P-00A TET112-01-34-00DL 程控定时器板EK-652P-00A TET112-01-51-00DL程控定时板EK-662P-02a TE188-055200DL 程控看门狗电路板EK-658P-02TE188-055300DL程控功率输出板EK-654P-02-IR TE188-057200DL40路串行数据输入板EK-432DV-00TE188-055500DL40路串行数据输出板EK-433DV-00TE188-055600DL EA功率输出板EL-T5534.002IR-B TE188-213000DL一继电器板 EL-T5301.00TET111-35-10-00DL 走行驱动控制板EK-3166LV-02TE188-054600DL走行速度显示板EK-2408LV-02TE188-054700DL走行速度控制板EK-3144LV-02TE188-054800DL捣固装置升降控制板EK-1AP11-02a TE188-053400DL 继电器板EK-602E-000TET112-02-41-40DL 卫星小车驱动控制板EK-1AP12-02a TE188-054500DL 夹持压力控制板EK-140LV-00TET112-01-73-00DL 卫星小车微控制板EK-537MC/161-14TE188-000706DL激光充电控制EL-T1100.13TE188-053400DL前端模拟量输入板EK-2409LV-02TE188-032400DL 压敏电阻版EK-5587.00TET111-02-20-20DL 五路超高信号选择板EL-5686.02TE188-033100DL五路起道信号选择板EL-T5539.02TE188-033200DL五路拨道信号选择板EL-T5538.02TE188-033300DL四路拨道信号选择板EL-T5589.02TE188-033400DL沉降补偿微控制板EK-537MC-00a/149TE188-053600DL起道模拟控制板EK-3069LV-02a TE188-053200DL电子摆及沉降补偿控制板EK-2351LV TE188-053300DL起拨道补偿微控制板EK-537MC-00a/150TE188-054200DL模拟适配器控制板EL-T5598.002TE188-059300DL拨道模拟控制板EK-2140LV-00TET112-01-65-00DL 拨道参数计算控制板EK-2350LV-02TE188-054300DL激光处理微控制板EK-537MC-00a/166TE188-032200DL激光发射电源充电板EL-T461.07b ZS99-24-30-00-1DL 自动定位控制板EK-1037LV/50-02TE188-053500DL卫星小车横向移动控制板EK-2324LV-02TE188-054400DL 距离脉冲处理板EL-T5596.00a TET111-36-10-00ADL 数字量输入输出板EL-T5201.00d模拟量输入输出板EL-T5202.00b通话放大板EL-T631.01/KM TET112-16-10-00DL 通话切换控制板EL-T5925.02TE188-121000DL延时继电器板(DGS)EL-T5227.00TET111-08-30-10DL 5s延时板(DGS)EL-T5226.00ZS99-03-20-10DL稳定程控主机板(DGS)EK-650PX-00TE188-372200DL 子程序板(DGS)EK-651P-00a TET121-01-41-00DL 程控定时板(DGS)EK-652P-00TET112-01-51-00DL 程控输入输出板(DGS)EK-653P-00TET112-01-33-00DL 程控功率输出板(DGS)EK-654P-00-IR TE188-057200DL40路串行数据输出板EK-432DV-00TE188-055500DL40路串行数据输入板EK-433DV-00TE188-055600DL报警电路板(DGS)EL-T5255.00a TET111-03-30-00DL ±15V,±10V,+5V(DGS)EL-819SV-00TE188-032300DL 稳定微机控制板EK-537MC-00/162TE188-373500DL下沉压力控制板EK-3165LV-02TE188-373200DL 振幅测量板EK-2413LV-002TE188-373300DL振频控制板EK-2682LV-02TE188-373400DL 稳定信号选择板EL-T5875.02TE188-022000DL。

COM Express Type 6 PMC XMC Ultra Lite Carrier 用户指南

COM Express Type 6 PMC XMC Ultra Lite Carrier 用户指南

COM Express® PMC/XMC Ultra LiteCarrierConnect Tech Inc.Tel:519-836-129142 Arrow Road Toll:800-426-8979 (North America only)Guelph, Ontario Fax:519-836-4878N1K 1S6 Email:********************* *********************** CTIM-00431 Revision 0.06 2018-01-08Table of ContentsPreface (4)Disclaimer (4)Customer Support Overview (4)Contact Information (4)Limited Product Warranty (5)Copyright Notice (5)Trademark Acknowledgment (5)ESD Warning (6)Revision History (6)Introduction (7)Product Features and Specifications (7)Product Overview (8)Block Diagram (8)Connector Locations (9)Connector Summary (10)Jumper Summary (11)Detailed Feature Pinouts and Functional Descriptions (11)Serial/GPIO Connector (11)VGA Video Connector (12)COM Express Module Connector (12)LVDS Video Connector (13)miniPCIe/mSATA Slots (14)Dual Function miniPCIe/mSATA Slots (14)Jumper Selection (14)Half and Full Length miniPCIe/mSATA module Installation (14)External SATA Connector (16)CPU Fan (16)System and Miscellaneous Connector (17)SIM Socket (17)HD Audio Connector (18)Software Support for the CS4207 (18)USB 2.0 Connector (18)DisplayPort Connector (19)HDMI / DVI / VGA from DisplayPort++ (19)10/100/1000 Ethernet (GBE) (20)USB 3.0/2.0 Connector (20)microSD CARD Connector (21)Power Connector (21)SATA/LVDS Power Connector (22)XMC Connector (22)PMC Connector (23)Typical Hardware Installation Procedure (24)On-board Indicator LEDs (24)Jumper Settings (25)J1 Jumper – LVDS PANEL (25)J2 Jumper – RTC Battery (25)J3 Jumper – RTC Battery (25)J6 Jumper – Shutdown Battery (25)J6 Jumper – Power Control (26)J4 Jumper – mSATA/miniPCIe (26)J8 Jumper – USB (26)J7 Jumper – GPIO-V (26)Thermal & Current Consumption Details (27)Thermal Details (27)Mechanical Details (27)Cables and Cable Kit Information (28)Cable Kits (28)CKG028 –“Full” Cable Kit (28)CKG021 –“Starter” Cable Kit (28)PrefaceDisclaimerThe info rmation contained within this user’s guide, including but not limited to any productspecification, is subject to change without notice.Connect Tech assumes no liability for any damages incurred directly or indirectly from anytechnical or typographical errors or omissions contained herein or for discrepancies between theproduct and the user’s guide.Customer Support OverviewIf you experience difficulties after reading the manual and/or using the product, contact theConnect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties. In the event that the reseller is unable to resolveyour problem, our highly qualified support staff can assist you. Our support section is available24 hours a day, 7 days a week on our website at: /support/resource-center/.See the contact information section below for more information on how to contact us directly. Our technical support is always free.Contact InformationMail/CourierConnect Tech Inc.Technical Support42 Arrow RoadGuelph, OntarioCanada N1K 1S6Email/Internet********************************************Telephone/FacsimileTechnical Support representatives are ready to answer your call Monday through Friday, from8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are:Toll Free: 800-426-8979 (North America only)Telephone: 519-836-1291 (Live assistance available 8:30 a.m. to 5:00 p.m. EST,Monday to Friday)Facsimile: 519-836-4878 (on-line 24 hours)Limited Product WarrantyConnect Tech Inc. provides a two-year Warranty for the COM Express® PMC/XMC Ultra LiteCarrier. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working orderduring the warranty period, Connect Tech Inc. will, at its option, repair or replace this product atno charge, provided that the product has not been subjected to abuse, misuse, accident, disaster or non-Connect Tech Inc. authorized modification or repair.You may obtain warranty service by delivering this product to an authorized Connect Tech Inc.business partner or to Connect Tech Inc. along with proof of purchase. Product returned toConnect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return MaterialAuthorization) number marked on the outside of the package and sent prepaid, insured andpackaged for safe shipment. Connect Tech Inc. will return this product by prepaid groundshipment service.The Connect Tech Inc. Limited Warranty is only valid over the serviceable life of the product.This is defined as the period during which all components are available. Should the product prove to be irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product ifavailable or to retract the Warranty if no replacement is available.The above warranty is the only warranty authorized by Connect Tech Inc. Under nocircumstances will Connect Tech Inc. be liable in any way for any damages, including any lostprofits, lost savings or other incidental or consequential damages arising out of the use of, orinability to use, such product.Copyright NoticeThe information contained in this document is subject to change without notice. Connect TechInc. shall not be liable for errors contained herein or for incidental consequential damages inconnection with the furnishing, performance, or use of this material. This document containsproprietary information that is protected by copyright. All rights are reserved. No part of thisdocument may be photocopied, reproduced, or translated to another language without the priorwritten consent of Connect Tech, Inc.Copyright 2016 by Connect Tech, Inc.Trademark AcknowledgmentConnect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this document as the property of their respective owners.Not listing all possible trademarks or copyright acknowledgments does not constitute a lack ofacknowledgment to the rightful owners of the trademarks and copyrights mentioned in thisdocument.ESD WarningElectronic components and circuits are sensitive toElectroStatic Discharge (ESD). When handling any circuitboard assemblies including Connect Tech COM Expresscarrier assemblies, it is recommended that ESD safetyprecautions be observed. ESD safe best practices include,but are not limited to:∙Leaving circuit boards in their antistatic packaginguntil they are ready to be installed.∙Using a grounded wrist strap when handling circuitboards, at a minimum you should touch a groundedmetal object to dissipate any static charge that maybe present on you.∙Only handling circuit boards in ESD safe areas,which may include ESD floor and table mats, wriststrap stations and ESD safe lab coats.∙Avoiding handling circuit boards in carpeted areas.∙Try to handle the board by the edges, avoidingcontact with components.Revision HistoryIntroductionConnect Tech’s PMC/XMC Ultra Lite Carrier is an extremely small carrier board featuringrugged, locking connectors and offers the ultimate durability. The PMC/XMC Ultra Lite Carrier is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C.Product Features and SpecificationsProduct Overview Block DiagramConnector LocationsConnector SummaryJumper SummaryDetailed Feature Pinouts and Functional Descriptions Serial/GPIO ConnectorThe CCG013 allows access to the COM Express modules GPIO by routing them out to a GPIO header. Also present is a direct connected RS-232 signal that utilizes the COM Express module’s UART.VGA Video ConnectorTo allow for greater flexibility, the CCG013 provides a VGA Video output. Routed directly from the COM Express Type 6, this provides additional video output formats for operation.COM Express Module ConnectorThe processor and chipset are implemented on the CCG013s COM Express Type 6 module, whichconnects to the CCG013 Carrier Board via a Tyco fine pitch stacking connector.LVDS Video ConnectorThe CCG013 provides dual 18 or 24 bit LVDS display channels via P9, which are connected directly from the COM Express Type 6 module.Note [1]: This voltage can be selected from Jumper J2 to be +3.3V, +5V, or +12VminiPCIe/mSATA SlotsDual Function miniPCIe/mSATA SlotsThe CCG013 has two special dual purpose miniPCIe/mSATA slots. Each of these slots can accept either a miniPCIe module or an mSATA SSD module. These slots have special circuitry that allows for the selection between connecting PCIe lanes or SATA lanes.Each of these slots are also provided with a USB 2.0 in addition to the PCIe as per the mini PCIe specification, see below for a block diagram of the slots functionality.miniPCIe/mSATA Dual Functionality Diagram**Please note, a SIM card is only availabe on miniPCIe/mSATA slot 0Jumper SelectionHalf and Full Length miniPCIe/mSATA module InstallationThe CCG013 comes with dual mounting solutions to allow for the population of a half and a full length module. If you would prefer to have a single slot or both slots populated with half-length hardware at the ****************************************************************************.External SATA ConnectorThe CCG013 provides two SATA plugs that are SATA-PCIe/104 switched. Please see SATA-PCIe/104 switching description for additional details.CPU FanSystem and Miscellaneous ConnectorThe System header can be used to connect the power button, reset button, and LED’s required to monitor the module performance or state.SIM SocketHD Audio ConnectorThe CCG013s features HD Audio capabilities with the assistance of the Cirrus Logic CS4207 Codec device. From the codec, 1 microphone input and 1 headphone output are available.Software Support for the CS4207The audio codec used on the PMC/XMC Ultra Lite Carrier board is the CS4207 from Cirrus Logic.Additional drivers will be needed to properly operate audio on the PMC/XMC Ultra Lite Carrier . Some downloadable links can be found below.Windows XP Driver :/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207_WinXP_1-0-0-38.zip Windows 7/8 Driver :/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207_LogoedDriverPackage_6-6001-1-39.zipLinux Driver : Included in kernels 2.6.30 and up.USB 2.0 ConnectorThe CCG013 has multiple USB Ports. USB 2.0 Port 6 is sourced directly from the COM Express module. USB 2.0 Port 7 however has multiple functionality options. Using Jumper J727, Port 7 can either be a Client USB, or it can be used to connect the SD Card to the COM Express module.Note [2]: USB 2.0 Port 7 can be optionally be used as client USB. Simply remove the Jumper from J8A to enable Note [3]: USB 2.0 Port 7 can be optionally be used to enable the SD Card. Simply remove the Jumper from J8B to enableDisplayPort ConnectorTwo DisplayPort++ connections from the COM Express module are available and can be configured to output DisplayPort, or HDMI/DVI/VGA through the use of a dongle. The configuration of each interface is setup via the COM Express module’s BIOS settings. Refer to the COM Express module’s documentation for more details.Note [4]: Cable assembly must tie high (+3.3V) for adapter output (HDMI/DVI/VGA) and low (GND) for DisplayPort outputHDMI / DVI / VGA from DisplayPort++The COM Express Type 10 Mini Carrier’s DisplayPort++ connector can be used for display outputs other than DisplayPort. The use of HDMI, DVI or VGA can be done through a simple dongle or cable assembly like the ones shown below. These can be purchased from any OEM vendor (such as ) or directly through Connect Tech.10/100/1000 Ethernet (GBE)The CCG013 features dual 10/100/1000 Ethernet Ports. GBE 0 is sourced from the COM Express module. Meanwhile, GBE 1 is sourced from an Intel 82574 PCIe PHY Controller located on the CCG013 Carrier Board, connected via PCIe x1 to the COM Express module.USB 3.0/2.0 ConnectorThe CCG013 provides up to a maximum of 4 USB 3.0 Ports. The USB 3.0 signals are sourced directlyfrom the COM Express Type 6 module, and run through a Pericom Semiconductor PI3EQX7502AIZDE re-driver. Over current protection, power supply filtering and ESD protection is provided.microSD CARD ConnectorThe CCG013 provides a microSD Card Slot. This microSD can be accessed by the COM Express module[9]Note [9]: USB 2.0 Port 7 can be optionally be used to enable the SD Card. Simply remove the Jumper from J8B to enablePower ConnectorThe CCG013 accepts a single power input to power all on-board devices. The CCG013 accepts a wide input range of +12V to +48V for operation.SATA/LVDS Power ConnectorThe CCG013 also provides power for external SATA Hard Drives and/or LVDS screens. The power connectors can be found next the External SATA connectors.XMC ConnectorThe CCG016 allows for I/O expansion with two XMC slots, both capable of x8 PCI Express connectivity.The XMC connectors comply with the VITA 42.0/42.3 standard. +VPWR is +5V, with an option to move to +12V +VPWR power.PMC ConnectorThe CCG016 allows for I/O expansion with two PMC slots, both capable of 32bit PCI connectivity. TheTypical Hardware Installation Procedure1.Ensure all external system power supplies are OFF.2.Install the necessary cables for the application. At a minimum, this would include:a)Power cable to the input power connectorb)Connect a video display cablec)Keyboard and mouse via USBd)SATA or mSATA hard driveFor additional information on the relevant cables, please see the Cables and Interconnects section of this manual.3.Connect the power cable to power supply4.Ensure your power supply is in the range of +12V to +48V DC5.Switch ON the power supply. DO NOT power up your system by plugging in live power.On-board Indicator LEDsThe CCG013 has 10 on-board indicator LEDs.** D32 Only on when on-board NAND option is implemented.Jumper SettingsThe CCG013 utilizes jumper blocks to control various features like LVDS, mSATA/miniPCIe switching, and Client USB.J1 Jumper – LVDS PANELJ2 Jumper – RTC BatteryJ3 Jumper – RTC BatteryJ6 Jumper – Shutdown BatteryJ6 Jumper – Power ControlJ4 Jumper – mSATA/miniPCIeNote [11]: See mSATA/miniPCIe Slots for detailed description of functionalityJ8 Jumper – USBJ7 Jumper – GPIO-VThermal & Current Consumption DetailsBelow are measurements taken with the CCG013 running in various configurations. Some values will change depending on what COM Express module, and what PMC/XMC modules are installed. Please refer to the module or card m anufacturer’s manual for full details on the current consumption of the particular module or peripheral you are using.Note [12]: COM Express Type 6 Module used for measurements - 4th Gen i7-4700Thermal DetailsAll components on the CCG013 are rated to a maximum operating temperature of -40°C to +85°C. Mechanical DetailsA complete 3D STEP Model file of the carrier can be downloaded here:/ftp/3d_models/CCG013_3D_MODEL.zipCables and Cable Kit InformationCable KitsThe following tables summarize the PMC/XMC Ultra Lite Carrier’s available cable kits from Connect Tech.CKG062 –“Full” Cable KitCKG021 –“Starter” Cable Kit。

大众电脑编码大全

大众电脑编码大全

大众电脑编码大全奥迪A6 2.8L ­01)3B0 907 551 BF 2.8L V6/5V G01 001 CODING:04552 ­02)4B0 927 156 AJ AG5 01V 2.8L5V USA 3132 CODING:00004 ­03)3B0 614 111 ABS/ASR 5.3 FRONT D00 CODING:00031 ­15)4B0 959 655 G Airbag Fronttseite 2001 CODING:00004 ­35)4B0 962 258 J Central Lock/Alarm D35 CODING:06731 ­45?)4B0 907 357 LEDCHTWETTEREGLER D004 CODING:00005 ­36)4B0 959 608 Sitzmamnory R1 F 000 CODING:00000 ­56)4C0 035 186 Radio D02 CODING:00207­66)4B0 919 283 ParkingSystem A6 Row D18 CODING:01106­17)4C0 920 930 A Ch-kOMRIINSTR VDO D12 CODING:00162 ­08)4B0 820 043 AF A6-Klimavnllautomat D65 coding:00160 ­奥迪A6 2.4L ­VIN:VBA24B013014521 ?15??01)3B0 907 552 AD 2.4L V6/5V G 0000 CODING:04552 ­02)4B0 927 156 AL AG5 01V 2.4L5V RHW 2526 CODING:00013­03)3B0 614 111 ABS/ASR 5.3 FRONT D00 CODING:00031­15)4B0 959 655G Airbag Fronttseite 2000 CODING:00004­35)4B0 962 258 E Zentralverrieg.DWA D34 CODING:04683­45)4B0 951 178 A (?Unnenmumueberw) D04 CODING: 00001­36)4B0 959 760 A Sitzmemnry D0556)4C0 035 186 Radio D02 CODING:00207­66)4B0 919 283 Parkingsystem A6 ROW D18 CODING:00106­17)4C0 920 930 A C5-KOMHI INSTR VDO D09 CODING:00062 ­08)4B0 820 043 AF A6-Klimavcllautomat D65 CIDING:00160­­大众奥迪1.8L ­01)4R0 906 018 CA 1.8L R4/5VT 0003 CODING:04502 ­03)3B0 614 111 ABS/ASR 5.3 FRONT D00 CODING:00022­15)4B0 959 655G Airbag Frongt+Seite 2001 CODING:00004 ­35)4B0 962 258J Cen tral lock/Alarm D35 CODING:00001­56)4C0 035 186 Radio CODING:00201­17)4C0 920 900A C5-KOMRI INSTR VDO D12 CODING:00144 ­08)4B0 820 043H A6-Klimauollautomat D64 CODING:00140­­宝来1.8L ­01)06A 906 032 LD 1.8L R4/5VT 0001 CODING:04530 ­02)01M 927 733 LL AG4 Getribe 01M 4956 coding:00000­03)1c0 907 379K ASR PRONT MK60 0103 CODING:0021505­15)1C0 909 601 2K Airbag VW51 0004 CODING:12875­46)1C0 959 799C 18 Komfortger BF HLO 0003 CODING:00259­56)3BD 035 186 Radio 5GD 0001 CODING:00403­17)1J5 920 826A KOMRITWEGFAHRSP VDO V04 CODING:05122­08)3B1 907 044C CLIMATRONIC C 2.0.0 CODING:01100­19)6N0 909 901 Gateway k<->CAN 0000 CODING:00006­2002上海大众 B5 V6 2.8L 自动波全车电脑版本号­地址码:01 - 发动机­零件号码: 3B0 907 551 CP 2.8L V6/5V G 0001­Coding 号: 08051 维修站号码: 00000­­地址码:02 - 自动波­零件号码: 8D0 927 156 DJ AG5 01V 2.8l5V RdW 1111­Coding 号: 00113 维修站号码: 66187­地址码:03 - ABS /ESP ­零件号码: 1J0 907 379 Q ABS/EDS 20 IE CA N 0001­Coding 号: 13604 维修站号码: 00000 ­地址码:08 - 空调系统冷气/暖气­零件号码: 3B1 907 044 J CLIMATRONIC B5GP 0003­Coding 号: 17000 维修站号码: 66187­­地址码:15-Airbags 气囊系统­零件号码: 1C0 909 605 B XJ AIRBAG VW51 04 02 * XJ为软件索引号­ Coding 号: 22602 维修站号码: 66187­地址码:17-仪表与IMMO­址码:36- 司机侧座椅调节­零件号码: 3B1 959 760 D Sitzverstellung 0101­Coding 号: 0000000 维修站号码: 00000­­地址码:55-射灯控制­零件号码: 4B0 907 357 LEUCHTWEITEREGLER D004­Coding 号: 00015 维修站号码: 66187­宝来汽车电脑器件型号­01- 发动机:06A906032EQ 1.6L 5V MQ2004680 ­CODING:00031 WSC:00000­VIN:LFVBA 11JX2 30499 94 IMMO_SN:VWZ7Z 0B642 2309­15-安全气囊:1C0909601 2K AIRBAG VW 510006 ­CODING:12875 WSC:10315 ­03 -ABS电脑:1C0907379L 0101ABS FRON 7MK60 ­CODING:0001025 WSC:00000 ­25-IMMOBILZER 电子防盗:Bitte Adresse 17 engeben­46-中控与适系统:1C0959799 2M Komfortger?t HLO 00001 ­CODING:00259 WSC: 00000 ­1C1959801A 1M TJrste uer FS KLO 0009­17-组合仪表(防盗)电脑版本:1J5920806b komb1+wegfarlrsp vdo v02­coding: 01102 wsc: 00000 ­VIN:LFVBA 11JX2 30499 94 IMMO_SN:VWZ7Z 0B6422309­19 - 网关: 6N0909901 Gateway k<-> can 0001­coding:00006 wsc:00000­AUDI A4 1.8­08 -空调系统­4A0 820 043D­CODING 00040­00060­00061­桑塔纳2000时代骄子­安全气囊1C0 909 601 2N AIRBAG VW51 0008­CODING:12878 WSC:01234­C5 发动机 4D0 907 551 AH CODING 号码­01 - ENGINE 发动机系统­4D0 907 551 AH 2.8L V6/5V MOTR HS D04­Coding: 06201 WSC 06335­宝来汽车电脑版本号­01- 发动机:06A 906 032JB 1.6L 5V AT AG4 4629 CODING:00033 ­02-自动变速箱­零件号码01M 927 733 KK 组件AG4 GETRIEBE 01M 4989 Coding 号00000­17-组合仪表(防盗)­电脑版本:1J5920806C komb1+wegfaHrsp vdo v02 coding: 01102 wsc:00000 ­46-舒适系统­零件号码 1C0 959 799 组件1M KOMFORTGER ?tHLO 0002 Coding号00259 ­斯科达法比亚气囊电脑­VAG NUMBER Index CODING­=========== ===== =====­1J0 909 603 AS AIRBAG 16723­1J0 909 603 AT AIRBAG 16724­2002 Jetta 1.8T 电脑版本号­01 --发动机: 06A 906 032 HF 1.8L R4/5VT G 0004­Coding: 07550 WSC 13622­02 -- 自动波09A 927 750 T AG5 Getriebe 09A 0193­03 -- ABS: 1C0 907 379 K ASR FRONT MK60 0103­Coding: 0018945 WSC 00028­17 -- 仪表/IMMO : 1J5 920 926 AX KOMBI+WEGFAHRSP VDO V11­Coding: 07204 WSC 22585­­19 -- 网关 6N0 909 901 Gateway K<->CAN 0001­Coding: 00006 WSC 22585­46 -- 中控与舒适系统 1C0 959 799 C 1H Komfortger醫HLO 0003­Coding: 00257 WSC 00028­56 -- 收放机3B7 035 180 Radio NP2 0055­Coding: 00031 WSC 00028­美规原装奥迪A6.2.8L 手动自动两用波箱电脑型号­发动机电脑:4D0907551AH 2.8L V6/5V MOTRAT D02­CODING:06252­波箱电脑:4B09271156G AG501V 2.8L5V USA 8509­CODING:00001­ABS电脑:8E0614111M ABS/EDS5.3 OUATTRO D31­CODING:06169­仪表电脑 :4B0919930RX C5-KOMBIINSTR VDO D15­CODING:07262­空调电脑 :4B0820043G A6-KLIMAVOLL AUTOMAT:D61­CODING:00160­中央控制门锁:4B0962258C CENTRALLOCK/ALARM D30­CODING:15885­宝来1.6L A/T发动机的CODING:00033­ABS:0001025 ­A/T:00000­仪表:01102 ­音响:00001­舒适性系统:00259 ­捷达:1.6l A/T发动机的CODING:04030 ­A/T:03604 ­SRS:00065 ­防盗:09600 捷­达都市先锋发动机:04003 A/T:00000 ­ABS:03604­一汽新A6­address 01­Protocol: KW1281­Controller: 3B0 907 551 CK ­Component: 2.8L V6/5V 0002­Coding: 08502­Shop #: WSC 00000­Address 03­Protocol: KW1281­Controller: 3B0 614 111 ­Component: ABS/ASR 5.3 FRONT D00­Coding: 00032­Shop #: WSC 00000­Address 17­Protocol: KW1281­Controller: 4C0 920 930 B ­Component: C5-KOMBIINSTR. VDO D12 ­Coding: 00162­Shop #: WSC 00000­01-发动机4B0 906 018 CL 1.8L R4/5VT G 0001­Coding: 16551 WSC 00008­WVWPD63B61P269969 VWZ7Z0A3551863­02-自动波 4B0 927 156 DA AG5 01V 1.8l5VT RdW 1313­Coding: 00013 WSC 00008­03 -ABS 3B0 614 111 ABS/ASR 5.3 FRONT D00­Coding: 00021 WSC 00028­17 -仪表&IMMO 3B0 920 925 B KOMBI+WEGFAHRSP VDO V13­Coding: 07235 WSC 00008­WVWPD63B61P269969 VWZ7Z0A3551863­46 - 中控与舒适系统 1C0 959 799 C 08 Komfortger醫HLO 0001­Coding: 00257 WSC 00008­A6.2.8 波箱控制单元编码­4B0927156G AG5 01V 2.8L­5V USA 8509­编码号是00001 ­原装奥迪A6电脑型号­美规原装奥迪A6.2.8L 手动自动两用波箱电脑型号­发动机电脑:4D0907551AH 2.8L V6/5V MOTRAT D02­CODING:06252­波箱电脑:4B09271156G AG501V 2.8L5V USA 8509­CODING:00001­ABS电脑:8E0614111M ABS/EDS5.3 OUATTRO D31­CODING:06169­仪表电脑 :4B0919930RX C5-KOMBIINSTR VDO D15­CODING:07262­空调电脑 :4B0820043G A6-KLIMAVOLL AUTOMAT:D61­CODING:00160­中央控制门锁:4B0962258C CENTRALLOCK/ALARM D30­CODING:15885­菠萝转向助力电脑编号­6Q0 423 156 Q LenkhilfeTRW V250­Coding: 10140 Code: WS C 12345­polo 波罗 1.4L MT 全车电脑版本号­01-ENGINE //01-10-d 188 (含 EPC 电子油门控制)­036 906 034 DM MARELLI 4MV 4837­Coding: 00071 WSC 12345­­03 - ABS 6Q0 907 379 L ABS FRONT MK60 0101­Coding: 0001097 WSC 12345­08 - 空调6Q0 820 045 Klimaanlage X0840­­15 - AIRBAG 6Q0 909 601 E 07 AIRBAG VW5 0007­Coding: 12343 WSC 12345­17 - 仪表/IMMO 6Q0 920 800 KOMBI+WEGFAHRSP VDO V16­Coding: 00141 WSC 57952­LSVFA49J732012842 VWZ7Z0C6831585­19 - 网关6N0 909 901 14 GATEWAY CAN 1S33­Coding: 00014 WSC 12345 ­46-J393(T23+T12C)舒适系统6Q0 959 433 G 4W Komfortgera 0002­Coding: 00064 WSC 12345 (coding 为00264 可多控制后面2个门)­J386(T12d+T8h+t12e)左前门: 6Q2959802A 4W Tusteuer.FS KLO 0001­J387(T8i +T6p+T12f)右前门: 6Q2959801A 4W Tusteuer.BF KLO 0001­56 - 收放机6QD 035 152 Radio 5GD 0001­Coding: 00001 WSC 12345­09 - 电源与继电器管理 6Q1 937 049 C 00 BN-SG. 1S33­Coding: 25612 Code: WSC 12345­44 - 转向助力6Q0 423 156 Q LenkhilfeTRW V250­Coding: 10140 Code: WSC 12345­03 - ABS 6Q0 907 379 L ABS FRONT MK60 0101­ Coding: 0001097 WSC 12345­上海大众菠萝全车电脑版本号­15 6Q0909601E 07 AIRBAG VW5 0007­CODING:12343­­17 6Q0 920 800 & ........... VDO V13­CODING:00141­­19 6N0 909 901 14 CE CAN­coding:00014­­09 6Q1 937 049C 00.BN -SG 1S32­coding:25612­­01 036 906 034DM m......4MZ 4449­coding:00071­­01 06A 906 032 JCME7.5.104686­coding:00071­­03 6Q0 907 379 E 0103 ABS MK60­coding:0001097­99新秀发动机CODING:06169­ABS :01901 ­SRS :12878­捷达发动机CODING:00001­ABS :01901­SRS :12336­点子防盗:10400­红旗发动机CODING:00000-00003­ABS :06272­点子防盗:09600­94奥迪V6防盗电脑版本:4A0 953 234,8D0953234 ,可互用­帕萨特B5电脑编号:­发动机:3B0907551CT CODING:08551­ABS:3Q0614517B CODING:04297。

汽车电脑板常用易损芯片

汽车电脑板常用易损芯片

帕萨特/高端汽车电脑仪表通讯芯片 主营汽车电脑芯片 汽车电脑板易损芯片 贴片20脚
新宝来仪表芯片 贴片SOP16脚 汽车IC 汽车仪表芯片 液晶屏驱动芯片 贴片48脚
大众途观斯柯达明锐昊锐BCM汽车电脑板转向灯控制芯片 汽车电脑板芯片 新帕萨特BCM转向灯芯片 专业汽车IC 速腾途观斯柯达明锐昊锐BCM汽车电脑板转向灯控制芯 大众POLO/波罗电脑板BCM转向灯控制芯片 专业汽车IC 新帕萨特汽车电脑前小灯驱动芯片 贴片12脚 专业汽车IC
捷达西门子汽车电脑板喷油驱动芯片 汽车IC 汽车电脑板 喷油驱动芯片 贴片八脚 专业汽车芯片IC 大众/奥迪A6汽车发动机喷油驱动芯片 博世原装 车身电脑I 伊南特喷油驱动芯片 BOSCH汽车发动机电脑板驱动IC芯片 ME7.5 M382汽车电脑板 全新捷达5V喷油驱动芯片 BOSCH ic
福特福克斯发动机电脑喷油嘴驱动芯片 福特蒙迪欧汽车发动机电脑板喷油嘴驱动芯片 汽车发动机电脑板芯片 大众捷达喷油电路芯片 福特蒙迪欧汽车发动机车身电脑板喷油嘴芯片 ME7.5 M382汽车发动机电脑板喷油驱动芯片 贴片铁底20
转速 转速 转速
存储 存储 存储 存储 存储 存储 存储 存储 存储 存储 存储 存储 存储 存储 存储
驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动 驱动
MEGAMOS-RES
VPSA132A
EM4093 HT1621B
VND5E050AK VNQ5E050MK VND5E050MK
大众朗逸/迈腾汽车车身发动机电脑板 电源驱动模块IC芯片 雪铁龙标致凯璇 马瑞利汽车发动电脑板 电源管理启动芯片 华泰圣达菲汽车发动机车身电脑板 电源管理控制驱动IC芯片
赛欧发动机电脑板电源芯片 BOSCH全新 贴片铁底36脚 汽车发动机电脑板 行身电脑ECU 马瑞利电源驱动芯片

Silicon Labs 芯片评估板 套件说明书

Silicon Labs 芯片评估板 套件说明书

EVALUATION BOARD/KIT IMPORTANT NOTICESilicon Laboratories Inc. and its affiliated companies ("Silicon Labs") provides the enclosed evaluation board/kit to the user ("User") under the following conditions:This evaluation board/kit ("EVB/Kit") is intended for use for ENGINEERING DEVELOPMENT, TESTING, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not a finished end-product fit for general consumer use. ANY OTHER USE, RESALE, OR REDISTRIBUTION FOR ANY OTHER PURPOSE IS STRICTLY PROHIBITED. This EVB/Kit is not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. As such, persons handling this EVB/Kit must have electronics training and observe good engineering practice standards. As a prototype not available for commercial reasons, this EVB/Kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.Should this EVB/Kit not meet the specifications indicated in the User's Guide, the EVB/Kit may be returned within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SILICON LABS TO USER, IS USER'S SOLE REMEDY , AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY , INCLUDING ANY WARRANTY OF MERCHANTABILITY , NONINFRINGEMENT, DESIGN, WORKMANSHIP , OR FITNESS FOR ANY PARTICULAR PUR-POSE.User assumes all responsibility and liability for proper and safe handling of the EVB/Kit. Further, User indemnifies Silicon Labs from all claims arising from User's handling or use of the EVB/Kit. Due to the open construction of the EVB/Kit, it is User's responsibility to take any and all appropriate precautions with regard to electrostatic discharge.EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CON-SEQUENTIAL DAMAGES.Neither Silicon Labs nor User is obligated to perform any activities or conduct any business as a consequence of using the EVB/Kit, and neither party is entitled to any form of exclusivity with respect to the EVB/Kit.Silicon Labs assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein.Please read the User's Guide and, specifically, the Warnings and Restrictions notice in the User's Guide prior to handling the EVB/Kit. This notice contains important safety information about temperatures and voltages. For additional environmental and/or safety information, please contact a Silicon Labs application engineer or visit /support/quality.No license is granted under any patent right or other intellectual property right of Silicon Labs covering or relating to any machine, process, or combination in which the EVB/Kit or any of its components might be or are used.User's use of this EVB/Kit is conditioned upon acceptance of the foregoing conditions. If User is unwilling to accept these conditions, User may request a refund and return the EVB/Kit to Silicon Labs in its original condition, unopened, with the original packaging and all documentation to:Mailing Address:400 W. Cesar Chavez Austin, TX 78701Copyright © 2012 by Silicon Laboratories Rev. 0.2 7/12P R E C I S I O N 32™ M C U D E V E L O P M E N T K I T Q U I C K -S T A R T G U I D E F O R K I T S F E A T U R I N G T H E U N I F I E D D E V E L O P M E N T P L A T F O R M (U D P )T h e P r e c i s i o n 32™ M C U D e v e l o p m e n t K i t s a r e a v a i l a b l e i n a l o w c o s t D e v e l o p m e n t K i t a n d a f u l l y f e a t u r e d E n h a n c e d D e v e l o p m e n t K i t . K i t c o n t e n t s a r e d e s c r i b e d b e l o w . A l l d e v e l o p m e n t k i t s c o m e w i t h a n M C U c a r d , U S B D e b u g A d a p t e r , a n d a l l n e c e s s a r y c a b l e s a n d p o w e r s u p p l i e s n e e d e d t o e v a l u a t e h a r d w a r e a n d d e v e l o p c o d e . T h e E n h a n c e d D e v e l o p m e n t K i t s a d d i t i o n a l l y c o n t a i n a U D PM o t h e r b o a r d a n d o n e o r m o r e I /O c a r d s t o e n h a n c e t h e u s e r e x p e r i e n c e .D e v e l o p m e n t K i t•U D P M C U c a r d•S i l i c o n L a b o r a t o r i e s U S B D e b u g A d a p t e r •S u p p o r t i n g C a b l e s a n d P o w e r S u p p l i esE n h a n c e d D e v e l o p m e n t K i t•U D P M C U c a r d•U D P M o t h e r b o a r d •U D P I /O c a r d (s )•S i l i c o n L a b o r a t o r i e s U S B D e b u g A d a p t e r •S u p p o r t i n g C a b l e s a n d P o w e r S u p p l i e sA. Install SoftwareB. Hardware Setup (Steps 1, 4, and 5 Only Apply to Enhanced Development Kits)C. Documentation12Click the large Download Button to initiate the Precision32 web install.Navigate to the Precision32 software download website.3Start the Installer and allow it to run in the background. Advance to Step 4 while the Precision32 Development Suite andAppBuilder are being installed./32bit-software1Connect the USB Debug Adapter ribbon cable to the MCU card.2Connect the USB Debug Adapter to thePC using the standard USB cable.I/O cardMCU card45If Enhanced DK, apply power to the UDP Motherboard using 1 of 4 power options,Power Options1: 9 V Universal Adapter (J20)2: Standard USB (J16) 3: Mini USB (J1)4: 6 V Battery Pack (J11)then set power switch (S3) to the ON Position.If Development Kit, apply power to the MCU Card using 1 of 2 power options.Power Options1: Mini USB – For USB MCUs2: 9 V Universal Adapter – For Non-USB MCUsIf Enhanced DK, update the motherboardfirmware using the UDP MotherboardFirmware Update Utility./udpMCU card321412Note: If Enhanced DK, the MCU Card is powered from the motherboard.36If Enhanced DK, connect the MCU card and I/O card to the UDP Motherboard.1Download the User’s Guide for EachBoard in the Development Kit.Where to Find DocumentationData Sheet:/32bit-mcu →Choose Product Family →Documentation tab Reference Manual:/32bit-mcu →Choose Product Family →Documentation tab Hardware User's Guide:/32bit-mcu →Design Resources →Unified Development Platform OR /udp Application Notes:/32bit-mcu →Design Resources →Application Notes Software Development Kit Documentation:C:\Silabs\32bit\si32-{revision}\Documentation\si32Hal.chm Quality Documents:/qualityE . U s i n g t h e P r e c i s i o n 32 D e v e l o p m e n t S u i t eT h e P r e c i s i o n 32 D e v e l o p m e n t S u i t e i s a c o m p l e t e d e v e l o p m e n t s y s t e m f o r S i l i c o n L a b s 32-b i t M C U s . T h e D e v e l o p m e n t S u i t e c o n s i s t s o f t h r e e p a r t s : t h e U n i f i e d D e v e l o p m e n t P l a t f o r m (U D P ) h a r d w a r e , t h e S o f t w a r e D e v e l o p m e n t K i t (S D K ), a n d t h e P C d e v e l o p m e n t t o o l s i n c l u d i n g A p p B u i l d e r a n d t h e I n t e g r a t e d D e v e l o p m e n t E n v i r o n m e n t (I D E ). S e e t h e a p p l i c a t i o n n o t e s l i s t e d b e l o wf o r c o m p l e t e d e t a i l s .t h e p r o g r a m . T h e L E D b l i n k . P a u s e p r o g r a R u nl i n e s o f c o d e a n d s e l e c t T o g B r e a k p o i n t t o a d d a b r e a k p o T h e n p r e s s R u n t o r u n t o b r e a k p o i c o d e .S t e p I n t o o r S t e p O v e r V i e w o r m o d i f y P e r i p h e r a R e g i s t e r s , o r M e m o i a b l e , r i g h t -c l i a n d s e l e c t A d d W a t c h E x p r e t o a d d i t t o t h e E x p r e s s i o n s w A p p B u i l d e r I D E•A N 675: P r e c i s i o n 32 D e v e l o p m e n t S u i t e O v e r v i e w•A N 667: G e t t i n g S t a r t e d w i t h t h e S i l i c o n L a b s P r e c i s i o n 32 I D E•A N 670: G e t t i n g S t a r t e d w i t h t h e S i l i c o n L a b s P r e c i s i o n 32 A p p B u i l d e r•A N 678: P r e c i s i o n 32 s i 32F l a s h U t i l i t y C o m m a n d -L i n e P r o g r a m m e r U s e r 's G u i d e•A N 719: P r e c i s i o n 32 I D E a n d A p p B u i l d e r D e t a i l e d T u t o r i a l a n d W a l k t h r o u g hW h e r e t o F i n d S u p p o r tM C U K n o w l e d g e B a s e :w w w .s i l a b s .c o m →S u p p o r t →K n o w l e d g e B a s eV i d e o T r a i n i n g M o d u l e s :w w w .s i l a b s .c o m →S u p p o r t →T r a i n i n g a n d R e s o u r c e sC o n t a c t a n A p p l i c a t i o n s E n g i n e e r :w w w .s i l a b s .c o m →S u p p o r t →C o n t a c t T e c h n i c a l S u p p o r tD . U s i n g t h e P r e c i s i o n 32 I DE f o r t h eF i r s t T i m e2R e g i s t e r t h e I D E u s i n g t h e s t e p s l i s t e d o n t h e W e l c o m e p a g e .1O p e n t h e P r e c i s i o n 32 I D E a n d s e l e c t t h e p r o j e c t w o r k s p a c e .313456S e l e c t j u s t t h e s i m x x x x x _B l i n k y c h e c k b o x ,e n s u r e C o p y p r o j e c t s i n t o w o r k s p a c e i s s e l e c t e d , a n d p r e s s F i n i s h .S e l e c t t h e I m p o r t S I 32 S D Ke x a m p l e (s ) l i n k i n t h e Q u i c k s t a r t w i n d o w .S e l e c t t h e s i m x x x x x _B l i n k yp r o j e c t i n t h e P r o j e c t E x p l o r e r a n d p r e s s B u i l d ‘B l i n k y ’ [D e b u g ] i n t h e Q u i c k s t a r t w i n d o w .S t a r t a D e b u g s e s s i o n b yc l i c k i n g D e b u g ‘B l i n k y ’ [D e b u g ] i n t h e Q u i c k s t a r t w i nd o w .。

ESAB Plasmarc 2-56 配件包说明书

ESAB Plasmarc 2-56 配件包说明书

2-Plasma Flow Measuring KitPlasmit w/TorchTorch Guide Kits■ Includes attachments for circle and straight linecutting on ferrous and non-ferrous metals■ For additional information, order literature number EMB-1074 (Deluxe Kit) and/or EMB-1075 (Basic Kit)Adaptor for PT-17AM and PT -20AMX Torches⏹ Adapts PT -17AM torch to PCM-875 and PCM-1125 console for manual cutting⏹ Adapts PT -17AM/PT -20AM torches to PCM-875 and PCM-1125 consoles for mechanized cutting90° Head Angle Converter Kit for PT -27/23 Torch⏹ Fits between handle and head of torch ⏹ Gives the effect of a 90° angle torch headPlasma Flow Measuring Kit⏹ Valuable troubleshooting tool⏹ Allows measurement of actual plasma gas flow through torchRemote Hand Switch⏹ Allows the operator to start and stop the cutting process with a remote switch.⏹ Used primarily for mechanized cutting and is included in the mechanized Plasmarc packagesTorch Retrofit Kits⏹ Allow select ESAB Plasmarc torches to be retrofitted to other brand plasma consoles⏹ Do not include the torch, which must be purchased separatelyLeather Sheath⏹ A 10 ft. (3 m) leather sheath to protect torch leads from abrasion and molten metal⏹ Particularly recommended for plasma gougingPlasmits⏹ Special flexible shields attach around the head of a plasma cutting torch to provide added protection against heat and molten metal⏹ Recommended for heavy duty plasma gouging applicationsTorch Wrap & Kit Holder⏹ This enables operator to store spare parts kit, wrap torch and work cable for easy transport and storageWheel Kit⏹ This enables easy transport of the PCM-500i,PCM-875 and PCM-1125 Series; and PowerCut ®875/1125 and PowerCut ®1250/1500 Series MachinesDeluxe Torch GuideKitBasic TorchGuide KitTorch Wrap and Kit Holder PowerCut ® MachinesWheel KitPowerCut ® MachinesOrdering InformationT orch Wrap and Kit Holder, PCM Series.................................33952GY T orch Wrap and Kit Holder, PowerCut ® 875/1125 ..............0558003013T orch Wrap and Kit Holder, PowerCut ® 1250/1500 (0558003059)T orch Wrap & Kit Holder PowerCut ®650 ...........................0558003398Wheel Kit PowerCut ® 650 ..................................................0558003399 Wheel Kit, PCM Series ................................................................34324Wheel Kit, PowerCut ® 875/1125 ........................................0558003014Wheel Kit, PowerCut ® 1250/1500 ......................................0558003060T orch Guide Kit for PT -17, 23/27, 25, 31/34 & PT -32EH T orches (Deluxe: 1-3/4 in. (44.45 mm) - 42 in. (106.7 cm) Radius) 0558003258PT -17 Bushing ...........................................................................TJ2226PT -23/27 Bushing ......................................................................TJ2225PT -25 Bushing ...........................................................................TJ2230PT -31XL Bushing .......................................................................TJ2228PT -32 Bushing ...................................................................0558003257T orch Guide Kit for PT -27/31XL/34/32 T orch(Basic: 1-3/4 in. (44.45 mm) - 28 in. (71 cm) Radius) .....0558********° Angle Converter Kit for PT -27 ............................................ 000222Plasma Flow Measuring Kit ........................................................19765Remote Hand Switch PT -20AMX ............................................. 680982Remote Hand Switch ESP-150 and ESP-200 .........................2075600Remote Hand Switch PT -21AMX .......................................0558003612Retrofit Kit to adapt PT -17A to PAK5XR/P AK10XR......................31548Retrofit Kit to adapt PT -31XL/ PT -27 to MAX-40 ..........................1822810 Ft. Leather Sheath with Snaps(For use with any ESAB Plasmarc torch) ................................20812Plasmit for PT -17A Manual T orch .................................................20803Plasmit for PT -121, 75° Torch .....................................................20742Plasmit for PT -121/PT -25, 90° Torch ............................................20801Plasmit for PT -121, Mechanical T orch ..........................................20802Plasmit for PT -251, 75° Torch .....................................................20805Plasmit for PT -26 70° T orch ...............................................0558006717Plasmit for PT -26 90° T orch ...............................................0558006718Plasmit for PT -251 Mechanical Torch ...........................................20807Adaptor for PT-17A & PT-20AMX on PCM-875 & PCM-1125 .. (19500)。

PM5560_PM5563_PM5563RD_ModbusRegisterList_v2.3.0

PM5560_PM5563_PM5563RD_ModbusRegisterList_v2.3.0

Peak Demand3802VA FLOAT32R---Peak Demand DateTime3804---DATETIME R---N/ADemand Channel 4 (Current A)3809------------------Current , Phase A Demand Sy stem Assignment3809---INT16U R0 – 6Current DemandRegister Number of Metered Quantity3810---INT16U R 1 – 32,767R_IA_50_60_CYC_RMS Current, Phase AUnits Code3811---INT16U R0 – 100Last Demand3812FLOAT32R---Present Demand3814FLOAT32R---NPredicted Demand3816FLOAT32R---NPeak Demand3818FLOAT32R---Peak Demand DateTime3820---DATETIME R---N/ADemand Channel 5 (Current B)3825------------------Current, Phase B Demand Sy stem Assignment3825---INT16U R0 – 6Current DemandRegister Number of Metered Quantity3826---INT16U R 1 – 32,767R_IB_50_60_CYC_RMS Current, Phase BUnits Code3827---INT16U R0 – 100Last Demand3828FLOAT32R---Present Demand3830FLOAT32R---NPredicted Demand3832FLOAT32R---NPeak Demand3834FLOAT32R---Peak Demand DateTime3836---DATETIME R---N/ADemand Channel 6 (Current C)3841------------------Current, Phase C Demand Sy stem Assignment3841---INT16U R0 – 6Current DemandRegister Number of Metered Quantity3842---INT16U R 1 – 32,767R_IC_50_60_CYC_RMS Current, Phase CUnits Code3843---INT16U R0 – 100Last Demand3844FLOAT32R---Present Demand3846FLOAT32R---NPredicted Demand3848FLOAT32R---NPeak Demand3850FLOAT32R---Peak Demand DateTime3852---DATETIME R---N/ADemand Channel 7 (Current N)3857------------------Current, Phase N Demand Sy stem Assignment3857---INT16U R0 – 6Current DemandRegister Number of Metered Quantity3858---INT16U R 1 – 32,767R_IN_50_60_CYC_RMS Current, Phase NUnits Code3859---INT16U R0 – 100Last Demand3860FLOAT32R---Present Demand3862FLOAT32R---NPredicted Demand3864FLOAT32R---NPeak Demand3866FLOAT32R---Peak Demand DateTime3868---DATETIME R---N/ADemand Channel 8 (Current Avg)3873------------------Current, Av erage Demand Sy stem Assignment3873---INT16U R0 – 6Current DemandRegister Number of Metered Quantity3874---INT16U R 1 – 32,767R_IAVG_50_60_CYC_RMS Current, Av erageUnits Code3875---INT16U R0 – 100Last Demand3876FLOAT32R---Present Demand3878FLOAT32R---NPredicted Demand3880FLOAT32R---NPeak Demand3882FLOAT32R---Peak Demand DateTime3884---DATETIME R---N/ADemand Channel 9 (Current G)3889------------------Current Ground Demand Sy stem Assignment3889---INT16U R0 – 6Register Number of Metered Quantity3890---INT16U R 1 – 32,767R_IG_50_60_CYC_RMSUnits Code3891---INT16U RWC0 – 100Last Demand3892FLOAT32R---Present Demand3894FLOAT32R---NPredicted Demand3896FLOAT32R---NPeak Demand3898FLOAT32R---Peak Demand DateTime3900---DATETIME R---N/ADemand Channel 10 (Input Metering Channel 1)3905------------------Input Metering Demand Sy stem Assignment3905---INT16U R0 – 6Register Number of Metered Quantity3906---INT16U R 1 – 32,767R_INPUT_MET_RATE_01Units Code3907---INT16U RWC0 – 100Last Demand3908See Units Code FLOAT32R---Present Demand3910See Units Code FLOAT32R---NPredicted Demand3912See Units Code FLOAT32R---NPeak Demand3914See Units Code FLOAT32R---Peak Demand DateTime3916---DATETIME R---N/ADemand Channel 11 (Input Metering Channel 2)3921------------------Input Metering Demand Sy stem Assignment3921---INT16U R0 – 6Register Number of Metered Quantity3922---INT16U R 1 – 32,767R_INPUT_MET_RATE_02Units Code3923---INT16U RWC0 – 100Last Demand3924See Units Code FLOAT32R---Present Demand3926See Units Code FLOAT32R---NPredicted Demand3928See Units Code FLOAT32R---NPeak Demand3930See Units Code FLOAT32R---Peak Demand DateTime3932---DATETIME R---N/ADemand Channel 12 (Input Metering Channel 3)3937------------------Input Metering Demand Sy stem Assignment3937---INT16U R0 – 6Register Number of Metered Quantity3938---INT16U R 1 – 32,767R_INPUT_MET_RATE_03Units Code3939---INT16U RWC0 – 100Last Demand3940See Units Code FLOAT32R---Present Demand3942See Units Code FLOAT32R---NPredicted Demand3944See Units Code FLOAT32R---NPeak Demand3946See Units Code FLOAT32R---Peak Demand DateTime3948---DATETIME R---N/ADemand Channel 13 (Input Metering Channel 4)3953------------------Input Metering Demand Sy stem Assignment3953---INT16U R0 – 6Register Number of Metered Quantity3954---INT16U R 1 – 32,767R_INPUT_MET_RATE_04Units Code3955---INT16U RWC0 – 100Last Demand3956See Units Code FLOAT32R---Present Demand3958See Units Code FLOAT32R---NPredicted Demand3960See Units Code FLOAT32R---NPeak Demand3962See Units Code FLOAT32R---Peak Demand DateTime3964---DATETIME R---N/ADemand Channel 14 (Active Pow er Phase A)3969------------------Demand Sy stem Assignment3969---INT16U RWC0 – 6PowerRegister Number of Metered Quantity3970---INT16U RWC 1 – 32,767R_PA_50_60_CYC_RMSUnits Code3971---INT16U RWC0 – 10012Last Demand3972KW FLOAT32R---Present Demand3974KW FLOAT32R---NPredicted Demand3976KW FLOAT32R---NPeak Demand3978KW FLOAT32R---Peak Demand DateTime3980---DATETIME R---N/ADemand Channel 15 (Reactive Pow er Phase A)3985------------------Demand Sy stem Assignment3985---INT16U RWC0 – 6PowerRegister Number of Metered Quantity3986---INT16U RWC 1 – 32,767R_QA_50_60_CYC_RMSUnits Code3987---INT16U RWC0 – 10015Last Demand3988KVAR FLOAT32R---Present Demand3990KVAR FLOAT32R---NPredicted Demand3992KVAR FLOAT32R---NPeak Demand3994KVAR FLOAT32R---Peak Demand DateTime3996---DATETIME R---N/ADemand Channel 16 (Apparent Pow er Phase A)4001------------------Demand Sy stem Assignment4001---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4002---INT16U RWC 1 – 32,767R_SA_50_60_CYC_RMSUnits Code4003---INT16U RWC0 – 10018Last Demand4004KVA FLOAT32R---Present Demand4006KVA FLOAT32R---NPredicted Demand4008KVA FLOAT32R---NPeak Demand4010KVA FLOAT32R---Peak Demand DateTime4012---DATETIME R---N/ADemand Channel 17 (Active Pow er Phase B)4017------------------Demand Sy stem Assignment4017---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4018---INT16U RWC 1 – 32,767R_PB_50_60_CYC_RMSUnits Code4019---INT16U RWC0 – 10012Last Demand4020KW FLOAT32R---Present Demand4022KW FLOAT32R---NPredicted Demand4024KW FLOAT32R---NPeak Demand4026KW FLOAT32R---Peak Demand DateTime4028---DATETIME R---N/ADemand Channel 18 (Reactive Pow er Phase B)4033------------------Demand Sy stem Assignment4033---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4034---INT16U RWC 1 – 32,767R_QB_50_60_CYC_RMSUnits Code4035---INT16U RWC0 – 10015Last Demand4036KVAR FLOAT32R---Present Demand4038KVAR FLOAT32R---NPredicted Demand4040KVAR FLOAT32R---NPeak Demand4042KVAR FLOAT32R---Peak Demand DateTime4044---DATETIME R---N/ADemand Channel 19 (Apparent Pow er Phase B)4049------------------Demand Sy stem Assignment4049---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4050---INT16U RWC 1 – 32,767R_SB_50_60_CYC_RMSUnits Code4051---INT16U RWC0 – 10018Last Demand4052KVA FLOAT32R---Present Demand4054KVA FLOAT32R---NPredicted Demand4056KVA FLOAT32R---NPeak Demand4058KVA FLOAT32R---Peak Demand DateTime4060---DATETIME R---N/ADemand Sy stem Assignment4065---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4066---INT16U RWC 1 – 32,767R_PC_50_60_CYC_RMSUnits Code4067---INT16U RWC0 – 10012Last Demand4068KW FLOAT32R---Present Demand4070KW FLOAT32R---NPredicted Demand4072KW FLOAT32R---NPeak Demand4074KW FLOAT32R---Peak Demand DateTime4076---DATETIME R---N/ADemand Channel 21 (Reactive Pow er Phase C)4081------------------Demand Sy stem Assignment4081---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4082---INT16U RWC 1 – 32,767R_QC_50_60_CYC_RMSUnits Code4083---INT16U RWC0 – 10015Last Demand4084KVAR FLOAT32R---Present Demand4086KVAR FLOAT32R---NPredicted Demand4088KVAR FLOAT32R---NPeak Demand4090KVAR FLOAT32R---Peak Demand DateTime4092---DATETIME R---N/ADemand Channel 22 (Apparent Pow er Phase C)4097------------------Demand Sy stem Assignment4097---INT16U RWC0 – 6PowerRegister Number of Metered Quantity4098---INT16U RWC 1 – 32,767R_SC_50_60_CYC_RMSUnits Code4099---INT16U RWC0 – 10018Last Demand4100KVA FLOAT32R---Present Demand4102KVA FLOAT32R---NPredicted Demand4104KVA FLOAT32R---NPeak Demand4106KVA FLOAT32R---Peak Demand DateTime4108---DATETIME R---N/AClock Sy nc Time of Day4147---INT16U RWC0-2359Time of day to which the demandinterv al is to be sy nchronized.TOU/MT Mode4190---INT16U RWC0 - 2TOU/MT Energy Activ e Rate4191---INT16U R0 – 8TOU/MT Energy Reset Date/Time4192---DATETIME R---N/AMT Active Energy Delivered Rates4196------------------Activ e Energy Deliv ered Rate 14196Wh INT64R---Activ e Energy Deliv ered Rate 24200Wh INT64R---Activ e Energy Deliv ered Rate 34204Wh INT64R---Activ e Energy Deliv ered Rate 44208Wh INT64R---Activ e Energy Deliv ered Rate 54212Wh INT64R---Activ e Energy Deliv ered Rate 64216Wh INT64R---Activ e Energy Deliv ered Rate 74220Wh INT64R---Activ e Energy Deliv ered Rate 84224Wh INT64R---MT Active Energy Received Rates4228------------------Activ e Energy Receiv ed Rate 14228Wh INT64R---Activ e Energy Receiv ed Rate 24232Wh INT64R---Activ e Energy Receiv ed Rate 34236Wh INT64R---Activ e Energy Receiv ed Rate 44240Wh INT64R---Activ e Energy Receiv ed Rate 54244Wh INT64R---Activ e Energy Receiv ed Rate 64248Wh INT64R---Activ e Energy Receiv ed Rate 74252Wh INT64R---Activ e Energy Receiv ed Rate 84256Wh INT64R---MT Reactive Energy Delivered Rates4260------------------Reactiv e Energy Deliv ered Rate 14260VARh INT64R---Reactiv e Energy Deliv ered Rate 24264VARh INT64R---Reactiv e Energy Deliv ered Rate 34268VARh INT64R---Reactiv e Energy Deliv ered Rate 44272VARh INT64R---Reactiv e Energy Deliv ered Rate 54276VARh INT64R---Reactiv e Energy Deliv ered Rate 64280VARh INT64R---Reactiv e Energy Deliv ered Rate 74284VARh INT64R---Reactiv e Energy Deliv ered Rate 84288VARh INT64R---MT Reactive Energy Received Rates4292------------------Reactiv e Energy Receiv ed Rate 14292VARh INT64R---Reactiv e Energy Receiv ed Rate 24296VARh INT64R---Reactiv e Energy Receiv ed Rate 34300VARh INT64R---Reactiv e Energy Receiv ed Rate 44304VARh INT64R---Reactiv e Energy Receiv ed Rate 54308VARh INT64R---Reactiv e Energy Receiv ed Rate 64312VARh INT64R---Reactiv e Energy Receiv ed Rate 74316VARh INT64R---Reactiv e Energy Receiv ed Rate 84320VARh INT64R---MT Apparent Energy Delivered Rates4324------------------Apparent Energy Deliv ered Rate 14324VAh INT64R---Apparent Energy Deliv ered Rate 24328VAh INT64R---Apparent Energy Deliv ered Rate 34332VAh INT64R---Apparent Energy Deliv ered Rate 44336VAh INT64R---Apparent Energy Deliv ered Rate 54340VAh INT64R---Apparent Energy Deliv ered Rate 64344VAh INT64R---Apparent Energy Deliv ered Rate 74348VAh INT64R---Apparent Energy Deliv ered Rate 84352VAh INT64R---MT Apparent Energy Received Rates4356------------------Apparent Energy Receiv ed Rate 14356VAh INT64R---Apparent Energy Receiv ed Rate 24360VAh INT64R---Apparent Energy Receiv ed Rate 34364VAh INT64R---Apparent Energy Receiv ed Rate 44368VAh INT64R---Apparent Energy Receiv ed Rate 54372VAh INT64R---Apparent Energy Receiv ed Rate 64376VAh INT64R---Apparent Energy Receiv ed Rate 74380VAh INT64R---Apparent Energy Receiv ed Rate 84384VAh INT64R---MT Input Metering Channel 01 Rates4388------------------Input Metering Channel 01 Rate 14388---INT64R---Input Metering Channel 01 Rate 24392---INT64R---Input Metering Channel 01 Rate 34396---INT64R---Input Metering Channel 01 Rate 44400---INT64R---Input Metering Channel 01 Rate 54404---INT64R---Input Metering Channel 01 Rate 64408---INT64R---Input Metering Channel 01 Rate 74412---INT64R---Input Metering Channel 01 Rate 84416---INT64R---MT Input Metering Channel 02 Rates4420------------------Input Metering Channel 02 Rate 14420---INT64R---Input Metering Channel 02 Rate 24424---INT64R---Input Metering Channel 02 Rate 34428---INT64R---Input Metering Channel 02 Rate 44432---INT64R---Input Metering Channel 02 Rate 54436---INT64R---Input Metering Channel 02 Rate 64440---INT64R---Input Metering Channel 02 Rate 74444---INT64R---Input Metering Channel 02 Rate 84448---INT64R---MT Input Metering Channel 03 Rates4452------------------Input Metering Channel 03 Rate 14452---INT64R---Input Metering Channel 03 Rate 24456---INT64R---Input Metering Channel 03 Rate 34460---INT64R---Input Metering Channel 03 Rate 44464---INT64R---Input Metering Channel 03 Rate 54468---INT64R---Input Metering Channel 03 Rate 64472---INT64R---Input Metering Channel 03 Rate 74476---INT64R---Input Metering Channel 03 Rate 84480---INT64R---MT Input Metering Channel 04 Rates4484------------------Input Metering Channel 04 Rate 14484---INT64R---Input Metering Channel 04 Rate 24488---INT64R---Input Metering Channel 04 Rate 34492---INT64R---Input Metering Channel 04 Rate 44496---INT64R---Input Metering Channel 04 Rate 54500---INT64R---Input Metering Channel 04 Rate 64504---INT64R---Input Metering Channel 04 Rate 74508---INT64R---Input Metering Channel 04 Rate 84512---INT64R---MT Setup Rate 14516------------------MT Day Ty pe Rate 14516---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 14517---INT16U RWC0-2359MT End Time Rate 14518---INT16U RWC0-2359MT Start Month Rate14519---INT16U RWC0-12MT Start Day Rate 14520---INT16U RWC0-31MT End Month Rate 14521---INT16U RWC0-12MT End Day Rate 14522---INT16U RWC0-31MT Setup Rate 24523------------------MT Day Ty pe Rate 24523---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 24524---INT16U RWC0-2359MT End Time Rate 24525---INT16U RWC0-2359MT Start Month Rate24526---INT16U RWC0-12MT Start Day Rate 24527---INT16U RWC0-31MT End Month Rate 24528---INT16U RWC0-12MT End Day Rate 24529---INT16U RWC0-31MT Setup Rate 34530------------------MT Day Ty pe Rate 34530---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 34531---INT16U RWC0-2359MT End Time Rate 34532---INT16U RWC0-2359MT Start Month Rate34533---INT16U RWC0-12MT Start Day Rate 34534---INT16U RWC0-31MT End Month Rate 34535---INT16U RWC0-12MT End Day Rate 34536---INT16U RWC0-31MT Setup Rate 44537------------------MT Day Ty pe Rate 44537---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 44538---INT16U RWC0-2359MT End Time Rate 44539---INT16U RWC0-2359MT Start Month Rate44540---INT16U RWC0-12MT Start Day Rate 44541---INT16U RWC0-31MT End Month Rate 44542---INT16U RWC0-12MT End Day Rate 44543---INT16U RWC0-31MT Setup Rate 54544------------------MT Day Ty pe Rate 54544---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 54545---INT16U RWC0-2359MT End Time Rate 54546---INT16U RWC0-2359MT Start Month Rate54547---INT16U RWC0-12MT Start Day Rate 54548---INT16U RWC0-31MT End Month Rate 54549---INT16U RWC0-12MT End Day Rate 54550---INT16U RWC0-31MT Setup Rate 64551------------------MT Day Ty pe Rate 64551---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 64552---INT16U RWC0-2359MT End Time Rate 64553---INT16U RWC0-2359MT Start Month Rate64554---INT16U RWC0-12MT Start Day Rate 64555---INT16U RWC0-31MT End Month Rate 64556---INT16U RWC0-12MT End Day Rate 64557---INT16U RWC0-31MT Setup Rate 74558------------------MT Day Ty pe Rate 74558---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 74559---INT16U RWC0-2359MT End Time Rate 74560---INT16U RWC0-2359MT Start Month Rate74561---INT16U RWC0-12MT Start Day Rate 74562---INT16U RWC0-31MT End Month Rate 74563---INT16U RWC0-12MT End Day Rate 74564---INT16U RWC0-31MT Setup Rate 84565------------------MT Day Ty pe Rate 84565---INT16U RWC 1 -10 1 = Ev ery day, 2-8 = Mon-Sunday9 = Week dayMT Start Time Rate 84566---INT16U RWC0-2359MT End Time Rate 84567---INT16U RWC0-2359MT Start Month Rate84568---INT16U RWC0-12MT Start Day Rate 84569---INT16U RWC0-31MT End Month Rate 84570---INT16U RWC0-12Energy Multi Tariff and Multi Circuit - 32 bit floating point values4800MT Active Energy Delivered Rates - 32 bit floating point values4800------------------Activ e Energy Deliv ered Rate 14800Wh FLOAT32R---NActiv e Energy Deliv ered Rate 24802Wh FLOAT32R---NActiv e Energy Deliv ered Rate 34804Wh FLOAT32R---NActiv e Energy Deliv ered Rate 44806Wh FLOAT32R---NActiv e Energy Deliv ered Rate 54808Wh FLOAT32R---NActiv e Energy Deliv ered Rate 64810Wh FLOAT32R---NActiv e Energy Deliv ered Rate 74812Wh FLOAT32R---NActiv e Energy Deliv ered Rate 84814Wh FLOAT32R---NMT Active Energy Received Rates - 32 bit floating point values4816------------------Activ e Energy Receiv ed Rate 14816Wh FLOAT32R---NActiv e Energy Receiv ed Rate 24818Wh FLOAT32R---NActiv e Energy Receiv ed Rate 34820Wh FLOAT32R---NActiv e Energy Receiv ed Rate 44822Wh FLOAT32R---NActiv e Energy Receiv ed Rate 54824Wh FLOAT32R---NActiv e Energy Receiv ed Rate 64826Wh FLOAT32R---NActiv e Energy Receiv ed Rate 74828Wh FLOAT32R---NActiv e Energy Receiv ed Rate 84830Wh FLOAT32R---NMT Reactive Energy Delivered Rates - 32 bit floating point values4832------------------Reactiv e Energy Deliv ered Rate 14832VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 24834VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 34836VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 44838VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 54840VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 64842VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 74844VARh FLOAT32R---NReactiv e Energy Deliv ered Rate 84846VARh FLOAT32R---NMT Reactive Energy Received Rates - 32 bit floating point values4848------------------Reactiv e Energy Receiv ed Rate 14848VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 24850VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 34852VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 44854VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 54856VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 64858VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 74860VARh FLOAT32R---NReactiv e Energy Receiv ed Rate 84862VARh FLOAT32R---NMT Apparent Energy Delivered Rates - 32 bit floating point values4864------------------Apparent Energy Deliv ered Rate 14864VAh FLOAT32R---NApparent Energy Deliv ered Rate 24866VAh FLOAT32R---NApparent Energy Deliv ered Rate 34868VAh FLOAT32R---NApparent Energy Deliv ered Rate 44870VAh FLOAT32R---NApparent Energy Deliv ered Rate 54872VAh FLOAT32R---NApparent Energy Deliv ered Rate 64874VAh FLOAT32R---NApparent Energy Deliv ered Rate 74876VAh FLOAT32R---NApparent Energy Deliv ered Rate 84878VAh FLOAT32R---NMT Apparent Energy Received Rates - 32 bit floating point values4880------------------Apparent Energy Receiv ed Rate 14880VAh FLOAT32R---NApparent Energy Receiv ed Rate 24882VAh FLOAT32R---NApparent Energy Receiv ed Rate 34884VAh FLOAT32R---NApparent Energy Receiv ed Rate 44886VAh FLOAT32R---NApparent Energy Receiv ed Rate 54888VAh FLOAT32R---NApparent Energy Receiv ed Rate 64890VAh FLOAT32R---NApparent Energy Receiv ed Rate 74892VAh FLOAT32R---NApparent Energy Receiv ed Rate 84894VAh FLOAT32R---NMT Input Metering Channel 01 Rates - 32 bit floating point values4896------------------Input Metering Channel 01 Rate 14896---FLOAT32R---NInput Metering Channel 01 Rate 24898---FLOAT32R---NInput Metering Channel 01 Rate 34900---FLOAT32R---NInput Metering Channel 01 Rate 44902---FLOAT32R---NInput Metering Channel 01 Rate 54904---FLOAT32R---NInput Metering Channel 01 Rate 64906---FLOAT32R---NInput Metering Channel 01 Rate 74908---FLOAT32R---NInput Metering Channel 01 Rate 84910---FLOAT32R---NMT Input Metering Channel 02 Rates - 32 bit floating point values4912------------------Input Metering Channel 02 Rate 14912---FLOAT32R---NInput Metering Channel 02 Rate 24914---FLOAT32R---NInput Metering Channel 02 Rate 34916---FLOAT32R---NInput Metering Channel 02 Rate 44918---FLOAT32R---NInput Metering Channel 02 Rate 54920---FLOAT32R---NInput Metering Channel 02 Rate 64922---FLOAT32R---NInput Metering Channel 02 Rate 74924---FLOAT32R---NInput Metering Channel 02 Rate 84926---FLOAT32R---NMT Input Metering Channel 03 Rates - 32 bit floating point values4928------------------Input Metering Channel 03 Rate 14928---FLOAT32R---NInput Metering Channel 03 Rate 24930---FLOAT32R---NInput Metering Channel 03 Rate 34932---FLOAT32R---NInput Metering Channel 03 Rate 44934---FLOAT32R---NInput Metering Channel 03 Rate 54936---FLOAT32R---NInput Metering Channel 03 Rate 64938---FLOAT32R---NInput Metering Channel 03 Rate 74940---FLOAT32R---NInput Metering Channel 03 Rate 84942---FLOAT32R---NMT Input Metering Channel 04 Rates - 32 bit floating point values4944------------------Input Metering Channel 04 Rate 14944---FLOAT32R---NInput Metering Channel 04 Rate 24946---FLOAT32R---NInput Metering Channel 04 Rate 34948---FLOAT32R---NInput Metering Channel 04 Rate 44950---FLOAT32R---NInput Metering Channel 04 Rate 54952---FLOAT32R---NInput Metering Channel 04 Rate 64954---FLOAT32R---NInput Metering Channel 04 Rate 74956---FLOAT32R---NInput Metering Channel 04 Rate 84958---FLOAT32R---NCommand Interface5000------------------Protected Command Interface5000------------------Command parameters5000------------------Requested Command5000---INT16U RW 1 – 32767NCommand Semaphore5001---INT16U RW---NCommand Parameter 0015002---INT16U RW---NCommand Parameter 0025003---INT16U RW---NCommand Parameter 0035004---INT16U RW---NCommand Parameter 0045005---INT16U RW---NCommand Parameter 0055006---INT16U RW---NCommand Parameter 0065007---INT16U RW---NCommand Parameter 0075008---INT16U RW---NCommand Parameter 0085009---INT16U RW---NCommand Parameter 0095010---INT16U RW---NCommand Parameter 0105011---INT16U RW---NCommand Parameter 0115012---INT16U RW---NCommand Parameter 0125013---INT16U RW---NCommand Parameter 0135014---INT16U RW---NCommand Parameter 0145015---INT16U RW---NCommand Parameter 0155016---INT16U RW---NCommand Parameter 0165017---INT16U RW---NCommand Parameter 0175018---INT16U RW---NCommand Parameter 0185019---INT16U RW---NCommand Parameter 0195020---INT16U RW---NCommand Parameter 0205021---INT16U RW---NCommand Parameter 0215022---INT16U RW---NCommand Parameter 0225023---INT16U RW---NCommand Parameter 0235024---INT16U RW---NCommand Parameter 0245025---INT16U RW---NCommand Parameter 0255026---INT16U RW---NCommand Parameter 0265027---INT16U RW---NCommand Parameter 0275028---INT16U RW---NCommand Parameter 0285029---INT16U RW---NCommand Parameter 0295030---INT16U RW---NCommand Parameter 0305031---INT16U RW---NCommand Parameter 0315032---INT16U RW---NCommand Parameter 0325033---INT16U RW---NCommand Parameter 0335034---INT16U RW---NCommand Parameter 0345035---INT16U RW---NCommand Parameter 0355036---INT16U RW---NCommand Parameter 0365037---INT16U RW---NCommand Parameter 0375038---INT16U RW---NCommand Parameter 0385039---INT16U RW---NCommand Parameter 0395040---INT16U RW---NCommand Parameter 0405041---INT16U RW---NCommand Parameter 0415042---INT16U RW---NCommand Parameter 0425043---INT16U RW---NCommand Parameter 0435044---INT16U RW---NCommand Parameter 0445045---INT16U RW---NCommand Parameter 0455046---INT16U RW---NCommand Parameter 0465047---INT16U RW---NCommand Parameter 0475048---INT16U RW---NCommand Parameter 0485049---INT16U RW---NCommand Parameter 0495050---INT16U RW---NCommand Parameter 0505051---INT16U RW---NCommand Parameter 0515052---INT16U RW---NCommand Parameter 0525053---INT16U RW---NCommand Parameter 0535054---INT16U RW---NCommand Parameter 0545055---INT16U RW---NCommand Parameter 0555056---INT16U RW---NCommand Parameter 0565057---INT16U RW---NCommand Parameter 0575058---INT16U RW---NCommand Parameter 0585059---INT16U RW---NCommand Parameter 0595060---INT16U RW---NCommand Parameter 0605061---INT16U RW---NCommand Parameter 0615062---INT16U RW---NCommand Parameter 0625063---INT16U RW---NCommand Parameter 0635064---INT16U RW---NCommand Parameter 0645065---INT16U RW---NCommand Parameter 0655066---INT16U RW---NCommand Parameter 0665067---INT16U RW---NCommand Parameter 0675068---INT16U RW---NCommand Parameter 0685069---INT16U RW---NCommand Parameter 0695070---INT16U RW---NCommand Parameter 0705071---INT16U RW---NCommand Parameter 0715072---INT16U RW---NCommand Parameter 0725073---INT16U RW---NCommand Parameter 0735074---INT16U RW---NCommand Parameter 0745075---INT16U RW---NCommand Parameter 0755076---INT16U RW---NCommand Parameter 0765077---INT16U RW---NCommand Parameter 0775078---INT16U RW---NCommand Parameter 0785079---INT16U RW---NCommand Parameter 0795080---INT16U RW---NCommand Parameter 0805081---INT16U RW---NCommand Parameter 0815082---INT16U RW---NCommand Parameter 0825083---INT16U RW---NCommand Parameter 0835084---INT16U RW---NCommand Parameter 0845085---INT16U RW---NCommand Parameter 0855086---INT16U RW---NCommand Parameter 0865087---INT16U RW---NCommand Parameter 0875088---INT16U RW---NCommand Parameter 0885089---INT16U RW---NCommand Parameter 0895090---INT16U RW---NCommand Parameter 0905091---INT16U RW---NCommand Parameter 0915092---INT16U RW---NCommand Parameter 0925093---INT16U RW---NCommand Parameter 0935094---INT16U RW---NCommand Parameter 0945095---INT16U RW---NCommand Parameter 0955096---INT16U RW---NCommand Parameter 0965097---INT16U RW---NCommand Parameter 0975098---INT16U RW---NCommand Parameter 0985099---INT16U RW---NCommand Parameter 0995100---INT16U RW---NCommand Parameter 1005101---INT16U RW---NCommand Parameter 1015102---INT16U RW---NCommand Parameter 1025103---INT16U RW---NCommand Parameter 1035104---INT16U RW---NCommand Parameter 1045105---INT16U RW---NCommand Parameter 1055106---INT16U RW---NCommand Parameter 1065107---INT16U RW---NCommand Parameter 1075108---INT16U RW---NCommand Parameter 1085109---INT16U RW---NCommand Parameter 1095110---INT16U RW---NCommand Parameter 1105111---INT16U RW---NCommand Parameter 1115112---INT16U RW---NCommand Parameter 1125113---INT16U RW---NCommand Parameter 1135114---INT16U RW---NCommand Parameter 1145115---INT16U RW---NCommand Parameter 1155116---INT16U RW---NCommand Parameter 1165117---INT16U RW---NCommand Parameter 1175118---INT16U RW---NCommand Parameter 1185119---INT16U RW---NCommand Parameter 1195120---INT16U RW---NCommand Parameter 1205121---INT16U RW---NCommand Parameter 1215122---INT16U RW---NCommand Parameter 1225123---INT16U RW---NCommand Parameter 1235124---INT16U RW---NCommand Status5125---INT16U R0 – 32767NCommand Result5126---INT16U R---N0 = Valid Operation2000 = Command Only Allowed In Command Data 0015127---INT16U R---NCommand Data 0025128---INT16U R---NCommand Data 0035129---INT16U R---NCommand Data 0045130---INT16U R---NCommand Data 0055131---INT16U R---NCommand Data 0065132---INT16U R---NCommand Data 0075133---INT16U R---NCommand Data 0085134---INT16U R---NCommand Data 0095135---INT16U R---NCommand Data 0105136---INT16U R---NCommand Data 0115137---INT16U R---NCommand Data 0125138---INT16U R---NCommand Data 0135139---INT16U R---NCommand Data 0145140---INT16U R---NCommand Data 0155141---INT16U R---NCommand Data 0165142---INT16U R---NCommand Data 0175143---INT16U R---NCommand Data 0185144---INT16U R---NCommand Data 0195145---INT16U R---NCommand Data 0205146---INT16U R---NCommand Data 0215147---INT16U R---NCommand Data 0225148---INT16U R---NCommand Data 0235149---INT16U R---NCommand Data 0245150---INT16U R---NCommand Data 0255151---INT16U R---NCommand Data 0265152---INT16U R---N。

加拿大联邦技术移民文件列表中文版

加拿大联邦技术移民文件列表中文版

加拿大第1页共7页
移民与公民身份
文件准备清单
永久居留——联邦技术工人
本文件仅提供PDF格式版本。

您需要将本表格及其它各项文件一同寄出。

您需要自行打印本表格并完成填写,并将其作为您申请材料的封面页。

文件准备清单中的内容和要求可能会改变。

我们建议申请人在准备材料期间定期登录加拿大移民与公民身份(CIC)网站,并通过网站提供的申请文件包来确保其准备的文件和表格符合最新版本准备清单的要求。

请按照本文件准备清单所标示的顺序整理您的各项文件并勾选各个项目后的“□”选框。

您无需装订文件,但可以使用曲别针来固定照片或保付支票等小尺寸附件。

如果您的文件原文使用英语或法语以外的文字,您需要在提交文件原文的同时附带经过公证(或认证)的翻译版本。

请不要在递交给加拿大移民办公室(CIO)的材料中夹带额外的文件。

请注意:如果您无法提供任何下列文件,您需要在您的申请中提供针对无法提供的文件的详尽书面解释并附上可能证明这一情况的文件。

如果您无法为您缺少的文件提供合理的解释,您的文件可能会被退回,且在某些情况下可能会导致拒签。

表格及附加文件(所有申请人均需要准备并提交)
所有提交的文件均无法退回。

因此,除非明确要求,您不要提交原始文件。

请注意,移民官员可能在稍后时间向您索要特定文件的原件或经过认证的翻译版本。

各国EMC标准

各国EMC标准

Korea- Radio Research Laboratory, MICStandard No. Standard Name Int''l StandardKN16-1 Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus CISPR16-1KN16-2 Specification for radio disturbance and immunity measuring apparatus and methods - Methods of measurement of disturbances and immunity CISPR16-2KN11 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment CISPR11KN13 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers associated equipment CISPR13KN14-1 Requirements for household appliances, electric tools and similar apparatus CISPR14-1KN15 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR15KN19 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz CISPR19KN20 Electromagnetic immunity of broadcast receivers associated equipment CISPR20KN41 Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices CISPR12KN22 Information technology equipment - Radio disturbance characteristics –Limits and methods of measurements CISPR22KN24 Information technology equipment –Immunity characteristics –Limits and methods of measurement(2000-183) CISPR24KN61000-4-2 Testing and measurement techniques - Electrostatic discharge immunity test IEC61000-4-2KN61000-4-3 Testing and measurement techniques –Radiated, radio-frequency, electromagnetic field immunity test IEC61000-4-3KN61000-4-4 Testing and measurement techniques - Electrical fast transient/burst immunity test IEC61000-4-4KN61000-4-5 Testing and measurement techniques - Surge immunity test IEC61000-4-5KN61000-4-6 Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields IEC61000-4-6KN61000-4-8 Testing and measurement techniques - Power frequency magnetic field immunity test IEC61000-4-8KN61000-4-11 Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests IEC61000-4-11European Union - EuropaStandard No. Standard Name Int''l StandardEN50081-1 Electromagnetic compatibility – Generic emission standard Part 1. Residential, commercial and light industry IEC61000-6-3EN50081-2 Electromagnetic compatibility –Generic emission standard Part 2. Industrial environment IEC61000-6-4EN50082-1 Electromagnetic compatibility – Generic immunity standard Part 1. Residential, commercial and light industry IEC61000-6-1EN50082-2 Electromagnetic compatibility –Generic immunity standard Part 2. Industrial environment IEC61000-6-2EN55011 Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment CISPR11EN55012 Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices CISPR12EN55013 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers associated equipment CISPR13EN55014-1 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus Part 1. Emission – Product family standard CISPR14-1EN55014-2 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus Part 2. Immunity – Product family standard CISPR14-2EN55015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR15EN55020 Electromagnetic immunity of broadcast receivers associated equipment CISPR20EN55022 Information technology equipment - Radio disturbance characteristics –Limits and methods of measurements CISPR22EN55024 Information technology equipment – Immunity characteristics – Limits and methods of measurement CISPR24EN61326 Electrical equipment for measurement, control and laboratory use – EMC requirementsEN55103-1 Electromagnetic compatibility –Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 1. EmissionEN55103-2 Electromagnetic compatibility –Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 2. ImmunityEN61000-3-2 Electromagnetic compatibility (EMC) Part 3. Limits Section 2. Limits for harmonic current emissions (equipment input current <=16A per phase) IEC61000-3-2EN61000-3-3 Electromagnetic compatibility (EMC) Part 3. Limits Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <= 16A IEC61000-3-3EN61000-4-2 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test Basic EMC publication IEC61000-4-2EN61000-4-3 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test IEC61000-4-3EN61000-4-4 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test Basic EMC publication IEC61000-4-4EN61000-4-5 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 5:Surge immunity test IEC61000-4-5EN61000-4-6 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields IEC61000-4-6EN61000-4-8 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 8: Power frequency magnetic field immunity test Basic EMC Publication IEC61000-4-8EN61000-4-11 Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests IEC61000-4-11EN45001 General criteria for the operation of testing laboratoriesEN60950 Specification for safety of information technology equipment, including electrical business machines EN61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - part 1: general requirements IEC61010-1EN60204-1 Safety of machinery - electrical equipment of machines –part 1: specification for general requirements IEC60204-1USA- Federal Communications CommissionStandard No. Standard Name Int''l StandardCFR47 Part2 Frequency Allocations and Radio Treaty Matters, General Rules and RegulationsCFR47 Part15 Radio Frequency Devices CISPR22CFR47 Part18 Industrial, Scientific, and Medical Equipment CISPR11CFR47 Part68 Connection of Terminal Equipment to the Telephone NetworkCFR47 Part90 Private Land Mobile Radio ServicesCFR47 Part95 Personal Radio ServicesTIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards FCC MP-5 FCC Methods of Measurements of Radio Noise Emissions from Industrial, Scientific, and Medical EquipmentANSI C63.2 Electromagnetic noise and field strength, 10 kHz to 40 GHz specificationsANSI C63.4 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHzANSI C63.5 American National Standard For Calibration of Antennas Used for Radiated Emission Measurements in Electromagnetic Interference (EMI) ControlANSI C63.7 Guide for Construction of Open Area Test Sites for Performing Radiated Emission Measurements UL 1950 Safety for Information Technology EquipmentCanada - Certification and Engineering BureauStandard No. Standard Name Int''l StandardInterference-Causing Equipment StandardsICES-001 Industrial, Scientific and Medical Radio Frequency Generators CISPR11ICES-002 Spark Ignition Systems of Vehicles and Other Devices Equipped with Internal Combustion Engines ICES-003 Digital ApparatusICES-004 Alternating Current High Voltage Power SystemsICES-005 Radio Frequency Lighting DevicesICES-006 AC Wire Carrier Current Devices (Unintentional Radiators)CS-03 Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids CompatibilitySDSL Requirements and Test Methods for Symmetric Digital Subscriber Line (SDSL) Terminal EquipmentRadio Equipment Technical Standards (Industry Canada)RSS-xxx License Exempt Radio Apparatus StandardsBETS-1/ BETS-3 Broadcasting Certificate Exempt Radio ApparatusBETS-xRSS-xxx Category I Equipment StandardsBETS-3/BETS-7ICES001~005RSS-xxx Category II Equipment StandardsCanadian Standards Association Standard (CSA-International)C108.1.1-1997 Electromagnetic Interference Measuring Instrument (CISPR Type)C108.1.2-1997 Electromagnetic Interference Measuring Instrument (ANSI Type)C108.1.5 M85 Line Impedance Stabilization NetworkC108.3.1-M84 Limits and Measurement Methods of Electromagnetic Noise From AC Power Systems, 0.15-30 MHzC108.4-M92 Limits and Methods of Measurement of Radio Interference Characteristics of Vehicles, Motor Boats and Spark-Ignited Engine-Driven DevicesC108.6-M91 Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment Adopted CISPR 11:1990C108.8-M1983 Electromagnetic Emissions from Data Processing Equipment and Electronic Office MachinesC108.9-M91 Sound and Television Broadcasting Receivers and Associated Equipment - Limits and Methods of Measurement of Immunity CharacteristicsCAN/CSACEI/IEC 61000-4-x Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section x IEC 61000-4-xCAN/CSACISPR22-96 Limits and Methods of Measurement of Radio Disturbance Characteristics of InformationTechnology Equipment CISPR22CSAC22.2 No. 950 Safety for Information Technology EquipmentCSAC22.2 No. 1010 TEM / LABCSAC22.2 No. 601.1 MedicalCSAC22.2 No. E65 Audio / VideoCSAC22.2 No. E335 HouseholdAustralia - Australian Communications AuthorityStandard No. Standard Name Int''l StandardAS/NZS 4251.1 Generic Emission StandardAS/NZS 4251.2 Generic Immunity StandardAS/NZS 3548 Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology EquipmentAS/NZS 2064 ISM EquipmentAS/NZS 1044 Electrical Motor-Operated $ Themal Appliances, Electric Tools & Similar ApparatusAS/NZS 1053 TV Receivers and Audio EquipmentAS/NZS 4051 Electrical Lighting and Similar EquipmentAS/NZS-4053 Immunity of Broadcast Receivers Associated EquipmentAS/NZS 2557 Spark Ignition EnginesAS/NZS 2279-2 Powerline HarmonicsAS/NZS 2279-3 Voltage FluctuationsChina - China Quality Certification CenterStandard No. Standard Name Int''l StandardGB 9254-88 Limits and Methods of Measurement of Radio Interference Characteristics of ITE CISPR22GB 13837 Limits and Methods of Measurement of Radio Interference Characteristics of Sound and Television Broadcast Receivers and Associated Equipment CISPR13Taiwan - The Bureau of Standards, Metrology and InspectionStandard No. Standard Name Int''l StandardCNS 13438 CNS C 6357 Limits and methods of measurement of radio interference characteristics of information technology equipmentCNS 13439 CISPR13CNS 13803 CISPR11CNS13783-1 CISPR14-1CNS 14115 CSPR15Japan - Voluntary Control Council for InterferenceStandard No. Standard Name Int''l StandardVCCI V-1 Agreement of Voluntary Control Council for Interference by Information Technology Equipment VCCI V-2 Regulations for Voluntary Control MeasuresVCCI V-3 Technical RequirementsVCCI V-4 Instruction for Test Conditions for Equipment Under TestVCCI V-5 Regulations for Registration of Measurement FacilitiesVCCI V-6 Guidelines for Management of Measurement FacilitiesVCCI V--7 Regulations for Market Sampling TestsVCCI V-10 Guidelines for the Calibration and Inspection of Measurement EquipmentVCCI V-11 Outline How to Fill Registration Documents of Measurement FacilitiesPSE Electrical Appliance and Material Safety LawRussia - Gosstandart of RussiaStandard No. Standard Name Int''l StandardGOST 29216-91 EmissionsGOST R50628-95 ImmunityFCC(Federal Communications Commission,美国联邦通信委员会)于1934年由COMMUNICATIONACT 建立是美国政府的一个独立机构,直接对国会负责。

芯片合格商品名单(QVL)标准表用户手册说明书

芯片合格商品名单(QVL)标准表用户手册说明书

Qualified Vendors List (QVL) Standard table for user manualProject Name:A*B*C*256MB Kingston KVR333X64C25/256N/A Kingston SS D3208DH1T-6256MB Kingston KVR333X64C25/256N/A Hynix SS HY5DU56822BT-J Pass Fail 512MB Kingston KVR333X64C25/512N/A Hynix DS HY5DU56822BT-J Pass Pass 512MB Kingston KVR400X643A/512N/A Hynix DS HY5DU56822BT-D43PassPass512MB Kingston KVR400X64C3A/512N/A Kingston DS D3208DL3T-5256MB Kingston KVR400X64C3A/256N/A Hynix SS HY5DU56822BT-D43256MB Infineon HYS64D64320GU-5-C 3Infineon SS HYB25D256800CE-5C Pass Pass 512MB Infineon HYS64D32300GU-5-C 3Infineon DS HYB25D256800CE-5C Pass Pass256MB Infineon HYS64D64320GU-5-C N/A Infineon SS HYB25D256800CE-5C Fail 512MB Infineon HYS64D64320GU-6-CN/A Infineon DS HYB25D256800CE-6C Pass Pass 256MB HY DDR400-256N/A Hynix SS HY5DU56822BT-D43PassFail256MB HY DDR266-256N/A Hynix SS HY5DU56822AT-H 256MB HY DDR333-256N/A Hynix SS HY5DU56822BT-J Pass Pass 512MB HY DDR333-512N/A Hynix DS HY5DU56822BT-J 256MB Corsair VS256MB400N/A Value select SS VS32M8-5 2B0409Pass Pass 512MB Corsair VS512MB400N/A Value select DS VS32M8-5 2B0402Pass Fail 256MB Corsair VS256MB333N/A SAMSUNG SS K4H5608380-TCB3Pass Pass 512MB Corsair VS512MB333N/A Value select DS VS32M8-6 2B0412Pass Pass 512MB Micron MT16VDDT6464AG-335GB N/A MICRON DS MT46V32M8-G Pass Pass 256MB Micron MT8VDDT3264AG-335GB 2.5MICRON SS MT46V32M8-G Pass Pass 256MB Micron MT8VDDT3264AG-40BGB 3MICRON SS MT46V32M8-G Pass Pass 512MB Micron MT16VDDT6464AG-40BGB 3MICRON DS MT46V32M8-G 256MB Samsung M368L3223FTN-CCC 3SAMSUNG SS K4H560838F-TCCC Pass Pass 512MB Samsung M368L6423FTN-CCC N/A SAMSUNG DS K4H560838F-TCCC Pass Fail 256MB Samsung M368L3223FTN-CB3 2.5SAMSUNG SS K4H560838F-TCB3Pass Pass 512MB Samsung M368L6423FTN-CB3 2.5SAMSUNG DS K4H5608838F-TCB3Pass Pass 256MB Winbond U24256ADWBG6H20N/A Winbond SS W942508CH-5Pass Pass 256MB Winbond U24256AAWBG6H20N/A Winbond SS W942508CH-6Pass Fail 512MB Winbond DDR333-512N/A Winbond DS W942508BH-6Pass Pass 512MB Winbond U24512ADWBG6H20N/A Winbond DS W942508CH-5Pass Pass 256MB Elpida U24256AD1PG6H20N/A Elpida SS DD2508AKTA-5C Pass Fail 512MB Elpida U24512AD1PG6H20N/A Elpida DS DD2508AMTA Pass Pass 256MB Transcend DDR400-256N/A SAMSUNG SS K4H560838F-TCCC Pass Pass 256MB Transcend DDR400-256N/A Mosel SS V58C2256804SAT5B PassPass512MB Transcend DDR400-512N/A Mosel DS V58C2256804SAT5B 512MB Transcend DDR400-512N/A SAMSUNG DS K4H560838F-TCCC 512MB TranscendDDR333-512N/A Hynix DS HY5DU56822CT-J Pass Pass256MB Pmi 3208GATA07-04A7N/A Pmi SS PM4D328D50406EU 512MB Pmi 3208GATA01-04A4N/A Pmi DS PM4D328S50403DU 256MB Kingmax MPMB62D-38LT3R N/A Mosel SS V58C2256804SAT6Pass Fail 512MB Kingmax MPMC22D-38HT3R N/A Hynix DS HY5DU56822BT-J Pass Pass 256MB Kingmax MPMB62D-38KT3R N/A KINGMAX SS KDL388P4LA-50Pass Pass 512MB Kingmax MPXC22D-38KT3R N/A KINGMAX DS KDL388P4EA-50Pass Pass 256MB Mosel V826632K24SATG-D33Mosel SS V58C2256804SAT5Pass Pass 512MB Mosel V826664K24SATG-D33Mosel DS V58C2256804SAT5Pass Fail 256MB Nanya NT256D64S88B1G-5T 3Nanya SS NT5DS32M8BT-5T Pass Fail 512MB Nanya NT512D64S8HB1G-5T3Nanya DS NT5DS32M8BT-5T 256MB Apacer 77.10628.10A 2.5Apacer SS AM3A5608AIT-6B Pass Pass 512MB Apacer 77.90728.U1G 2.5Apacer DS AM3A568AJT-6B Pass Pass 512MB Apacer 77.10736.464 3SAMSUNG DS K4H560838E-TCCC 512MB Apacer 77.90739.U1G 2.5Apacer DS AM3A568AJT-5A Pass Pass 256MB Apacer 77.10636.46G 3SAMSUNG SS K4H560838E-TCCC 256MB Apacer 77.10636.56G3Mosel SS V58C2256804SAT5B Pass Fail 512MB Apacer 77.10736.11G 3Infineon DS HYB25D256800BT-5B Pass Fail 256MB Smart U24256ADSRG6H20N/A Smart SS D32M8XS50H3X4AMV Pass Fail 512MB Smart U24512ADSRG6H20N/A Smart DS D32M8XS50H3X4AMV Pass Pass 512MB Smart U24512ADSKG6H20N/A Smart DS D32M8XS60HBX4AMV1G Twinmos M2S5016AJAMC5G0811A-J N/A TWINMOS DS 46V64M8Pass Pass 512MB Twinmos M2S9J18BGAPS9F0811A-T 2.5PSC DS A2S56D30ATP 256MB A Data MDOSS1F3G3X10BZL0Z N/A SAMSUNG SS K4H560838E-TCC5PassPass512MBA DataMDOSS1F3H4X10BZL0ZN/ASAMSUNGDSK4H560838E-TCC5BrandSS/DSComponentDIMM socket support (Optional)SizeVendorModelCL512MB Promos V826662K24SCTG-D0 2.5Promos DS5B Pass Pass Note:A* : Supports one module inserted in any slot as Single-channel memory configurationB* : Supports one pair of modules inserted into eithor the blue slots or the black slots as one pair of Dual-channel memory configuration C* : Supports 4 modules inserted into both the blue and black slots as two pairs of Dual-channel memory configuration。

556芯片

556芯片

556芯片556芯片是一款由中国科学院微电子研究所研制的高性能、低功耗的集成电路芯片。

它采用了先进的工艺技术和优化的电路设计,具备强大的计算和处理能力,广泛应用于计算机、通信、工业控制等领域。

556芯片采用了最新的FinFET工艺,具有更小的晶体管尺寸和更低的功耗。

它采用了6代超高密度的片上互联技术,实现了更高的数据传输速率和更低的信号延迟。

此外,它还采用了先进的时钟和电源管理技术,提供了更高的时钟频率和更低的功耗。

556芯片具备丰富的功能和强大的性能。

它采用了多核架构,每个核心都具有独立的算术逻辑单元和高速缓存,可同时执行多个任务。

每个核心还配备了高速浮点运算单元,支持复杂的浮点运算和图形处理。

此外,556芯片还拥有丰富的外设接口和内存控制器,可实现与外部设备的高速数据交换和存储。

556芯片具有出色的能耗表现。

它通过引入动态电压频率调节技术和睿频技术,实现了根据应用场景自动调节电压和频率,最大程度地提高能效。

同时,它还具备智能功耗管理和睡眠状态切换功能,可在不需要高性能时自动降低功耗,进一步延长电池寿命。

556芯片的应用领域非常广泛。

在计算机领域,它可以用作服务器、超级计算机和高性能工作站上的处理器,具备强大的计算能力和运算速度。

在通信领域,它可以用于5G基站、网络交换机和路由器上,提供高速的数据传输和处理能力。

在工业控制领域,它可以用于工业自动化系统、智能电网和机器人控制器上,实现高效的实时控制和数据处理。

总之,556芯片是一款高性能、低功耗的集成电路芯片,具备强大的计算和处理能力,广泛应用于计算机、通信、工业控制等领域。

它采用了先进的工艺技术和优化的电路设计,具备出色的能耗表现,为各种应用场景提供了高速、高效的数据处理和传输能力。

MOTOR CONTROLLERS 手动控制电机控制器说明书

MOTOR CONTROLLERS 手动控制电机控制器说明书

Certificate Number20160727-E54612 Report ReferenceE54612-20020109 Issue Date 2016-JULY-27Bruce Mahrenholz, Director North American Certification ProgramUL LLCIssued to: Rockwell Automation Switzerland GmbHIndustriestrasse 205000 Aarau SWITZERLANDThis is to certify that representative samples of MOTOR CONTROLLERS, MANUALSee Addendum PageHave been investigated by UL in accordance with theStandard(s) indicated on this Certificate.Standard(s) for Safety: UL 60947-1 and CSA C22.2 No. 60947-1-13, Low VoltageSwitchgear and Controlgear, Part 1: General RulesUL 60947-4-1 and CSA C22.2 No. 60947-4-1-14, LowVoltage Switchgear and Controlgear, Part 4-1: Contactorsand Motor Starters, Electromechanical Contactors andMotor-StartersAdditional Information:See the UL Online Certifications Directory at/database for additional informationOnly those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service.Look for the UL Certification Mark on the product.Certificate Number20160727-E54612 Report ReferenceE54612-20020109 Issue Date 2016-JULY-27Bruce Mahrenholz, Director North American Certification ProgramUL LLCThis is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.Cam Switch, Cat. No. LE7 or LA7 followed by –16 followed by –1753Accessories – Fourth Pole Assembly LA7-16-NP and LE7-16-NP, Ground Terminal LA7-16-PE and LE7-16-PE, Neutral Terminal LA7-16-TN and LE7-16-TNCam Switch, Cat. No. 194E-E or 194E–A followed by –16 followed by –1753Accessories – Fourth Pole Assembly 194E-A-16-NP, 194E–E-16-NP, Ground Terminal 194E-A-16-PE, 194E–E-16-PE, Neutral Terminal Cat. No. 194E-A-16-TN, 194E–E-16-TN。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

IMM
(05-2004)English
5562
To
The principal applicant must complete this form.
If there is not enough space to provide all the necessary information, use an extra sheet of paper.Print your name and the form's title on the additional sheet.
Family name
1 - Your full name (DISPONIBLE EN FRANÇAIS - IMM 556
2 F)
IMM 5562 (05-2004) E
PAGE 1 OF 2
SUPPLEMENTARY INFORMATION
Your travels
Given name(s)
FOR OFFICE USE ONLY
04-200404-2004 6 days Madrid, Spain Business
Length
M
Y
To
Length
M
Y
b) Your spouse or common-law partner
did not travel
a) You
did not travel
PROTECTED WHEN COMPLETED - B
Citizenship and
Immigration Canada Citoyenneté et
Immigration Canada
From
M
Y
Purpose of travel
Destination (City and country)
From
M
Y
Purpose of travel
Destination (City and country)
List all trips you, and if applicable, your family members have taken outside your country of origin or of residence in the last ten years (or since
your 18th birthday if this was less than ten years ago). Include all trips: tourism, business, training, etc. If you or your family member did not travel outside of your country during this period, check "did not travel".For example:
2 -
IMM 5562 (05-2004) E
c) Your dependent child 18 years old or older PAGE 2 OF 2
Given name(s)
The information you provide on this form is collected under the authority of the Immigration and Refugee Protection Act and will be used for the purpose of assessing your application for permanent residence according to the requirements of the Act. It will be retained in Personal Information Bank CIC PPU 039 entitled Overseas Immigration Case File identified in Infosource . It may be shared with other organizations in accordance with the consistent use of information under the Privacy Act . Under the Privacy Act and the Access to Information Act individuals have the right to protection of and access to their personal information. Details on these matters are available at infosource.gc.ca and through the Citizenship and Immigration Call Centre. Infosource is also available in Canadian public libraries .
did not travel
To
Length
M
Y
To
Length
M
Y
To
Length
M
Y
e) Your dependent child 18 years old or older Given name(s)
did not travel
From
M
Y
Purpose of travel
Destination (City and country)
d) Your dependent child 18 years old or older Given name(s)
did not travel
From
M
Y
Purpose of travel
Destination (City and country)
From
M
Y
Purpose of travel
Destination (City and country)。

相关文档
最新文档