CC4024
铁路客车弹簧参数表
附件：《客车转向架弹簧参数表》、《盘形制动装置制动力参数表》22、23型客车轴箱弹簧参数表22、23型客车摇枕弹簧参数表RW24型客车轴箱及摇枕弹簧参数表25型客车轴箱弹簧参数表25型客车轴箱弹簧参数表25型客车摇枕弹簧参数表25型客车摇枕弹簧参数表25型客车轴箱弹簧参数表25型客车轴箱弹簧参数表25型客车摇枕弹簧参数表25型客车摇枕弹簧参数表25型客车轴箱弹簧参数表25型客车轴箱弹簧参数表25型客车轴箱弹簧参数表SYS 系列空气弹簧参数表25B 型、25G 型客车盘形制动装置制动力参数表2、四厂XL25G 206323、206324现车制动杠杆倍率小于参数表，详见“附录”。
25B 型、25G 型客车盘形制动装置制动力参数表注：1、SRZ25B型制动缸空气压力取值依据（长客SYZ25B同）：（1）《双层客车段修规程》（铁辆[1996]10号）；U5A阀性能试验，空/重车位空气弹簧空气压力270kPa/420kPa时，空/重车位制动缸空气压力快充（230±10）kPa/（330±10）kPa。
（2）《双层客车制动技术》（铁科院机辆所，1991.12）：“双层客车空车时速120公里”、“轴重130kN”、“空重阀输出压力0.26MPa”。
2、载重：“（）”为推算载重，原车无标记载重。
以下各表同。
25B 型、25G 型客车盘形制动装置制动力参数表25K 型客车盘形制动装置制动力参数表注：U5A阀客车自重、总重相近者，制动缸空气压力取同值。
因自重、总重等的差异，制动缸空气压力值公差约为±10kPa。
制动缸空气压力数据：上排——1、按《25K型客车检修规程》（A3修）U5A阀性能试验，装车后空车制动缸空气压力； 2、209HS型 XL25K、UZ25K同时还按浦厂2001年1月“关于取消209HS 转向架踏面清扫器的通知”: "3、对于有空重车阀的车型（如双客、行李、邮政），除取消踏面清扫装置外，还需通过调整空重车阀的调节螺母调节制动缸空车压力，将行李、邮政车调至3.3kgf/cm2(原约为2.6kgf/cm2)。
Precisa Gravimetrics AG 打印机 LP 4024 使用说明书
Accessories350-8391Printer LP 4024 Operating InstructionsM 350-8391-100 a2Table of contents 350-8391 Table of contentsTable of contents (1)Identification (1)Copyright (1)Conventions in this manual (2)Safety precautions (2)Introduction (3)Features (3)Dimensions and weight (3)Overview (4)Scope of delivery (5)Spare parts (5)Installation (6)Installing the ink ribbon cassette (6)Power supply (7)Installing the paper roll (7)Physical connection to the balance (8)Operation (8)Setting the interface automatically (8)Setting the interface manually (8)Cleaning and storing the printer (9)Cleaning (9)Storing (10)Troubleshooting (10)IdentificationOperating instructions for accessory; 350-8391, Printer LP 4024350-8391-100a2June 2019Subject to technical modificationsCopyrightNo reproduction in any form of this document, in whole or in part, may be made without written authorization from Precisa Gravimetrics AG.© Precisa Gravimetrics AG, 8953 Dietikon, Switzerland, 2019A.MMDCCLXXII A.V.C.ROMANVS EMONENSIS FECIT1Precisa Gravimetrics AG350-8723 Conventions in this manualPrecisa Gravimetrics AG2Conventions in this manualDANGERWarning of a possible danger which can lead to death or serious physical injuries.WARNINGWarning of a possibly dangerous situation which can lead to less severe injuries or damage.NOTETips and important rules on the correct operation of the printer.• The term "balance" also refers to moisture analyzers.• Keys are shown in bold type, e.g. "press the Line feed key" is stated as "press LF ".Safety precautions• When the printer is used in environments with increased safety requirements, the relevant precautions must be taken. • The printer must only be operated with a fault-free power adapter. • The printer must only be operated with the power adapter supplied.• If the cable, the power adapter or its cable is damaged, unplug the printer immediately from the electrical outlet and keep it from inadvertent operation. • Do not operate the printer in an area subject to explosion risks or caustic atmospheres.• Take care when handling with liquids, that no liquid is split into the inside of the printer, on connections of the device and the power adapter. Should this although happen, unplug the printer immediately from the electrical outlet and keep it from inadvertent operation. The printer may only be operated again after a re-check made by a service technician. • When using the printer in combination with other appliances made by the original manufacturers as well as with appliances produced by other manufacturers, the current regulations for the safe use of the relevant attachments and their application in accordance with instructions must always be observed.DANGERIf safe operation of the printer is not possible, it must be disconnected from the power supply and secured against unintentional use.DANGERBefore connecting the printer to the mains, be sure that the operating voltage stated on the printer and on the power adapter agrees with the local mains voltage. If it doesn't, the equipment must not be connected to the mains at all!DANGERBe sure to hold the plug, not the cable, when disconnecting the printer from an electrical outlet!NOTEIf any damage or injury occurs, liability and responsibility rest with the user.Introduction 350-83913Precisa Gravimetrics AGIntroductionThe compact LP 4024 printer is specially designed for Precisa balances and moisture analyzers and meets basic data printing needs.Features• 8 pins shuttle impact dot matrix printing, approx. 1.7 lines/sec, reliability (MCBF) 106 lines. • Printout on normal paper, width 57mm, roll diameter 50mm, suitable for long-term storage. • Two ink ribbon cartridge types, long life and standard. • RS232 port for data input. • Input buffer 5120 bytes.• USB port for connection to PC for printer setting tool.• Power supply, input 9 .. 25V, polarity protection, overcurrent protection. • Power adapter, DC 12V/1500mA, polarity• Operation at +5 .. +45°C, 10 .. 80% relative humidity, non condensing.Dimensions and weightPrinter only• Weight with ink ribbon and paper roll: 550gComplete package• Dimensions: 23.5 x 17 x 18cm (WxHxD) • Weight:1525g114.6mm86.6mm188.2m m350-8723 IntroductionPrecisa Gravimetrics AG 4OverviewRemarksPower indicator• The indicator lights up when the printer is turned on.Line feed key• Pressing LF feeds one line.• Holding LF feeds continuously until released.• Holding LF and then turning on the printer starts the automatic detection of the balance's interface parameters for setting them to the printer, too. Learn more in chapter "Setting the interface automatically" on page 8.USB-B Port• Inactive for measuring results transfer. For setting interface manually only. Learn more in chapter "Setting the interface manually" on page 8.Paper coverRS232 Port, DB9mPaper exitPower indicatorPower switchLF (line feed) keyUSB-B PortPower jackIntroduction 350-83915 Precisa Gravimetrics AGScope of deliveryPos. Pcs. Item1 1 Printer2 1 Universal power adapter3 1 Data cable DB9m-DB9f, length 1.5m4 1 Data cable RJ45-DB9f, length 1.5m5 2 Ink ribbon cassette (one of them is already installed)6 2 Paper roll- 1 Quick start guide (not on the above picture, also available as PDF at under support)Spare partsPos. Item numberItem1 -Printer: Not available individually2 350-8394 Universal power adapter, 100-240V/50-60Hz; 12V/1.5A, VI3 350-8672 Data cable DB9m-DB9f, length 1.5m, (to PC/printer LP 4024)4 350-8557 Data cable RJ45-DB9f, length 1.5m, (to PC/printer LP 4024)5 PN 3953-013 Ink ribbon cassette6 350-8392 Paper roll, set of 4pcs- PN 3950-125USB cable A-B, length 1.5m (for setting interface manually)5614 3 2350-8723 InstallationPrecisa Gravimetrics AG6InstallationInstalling the ink ribbon cassetteNOTETo ensure that the ink ribbon comes before the paper, first insert the ribbon.• Ensure the printer is turned off. • Lift the paper cover.• Put the left side of ink ribbon cassette on the gear shaft on the left side of the printer mechanism, and uplift the right side slightly. If the left side of ink ribbon cartridge does not reach the bottom, press the knob of the ink ribbon cassette and rotate it slowly towards the direction indicated by the arrow. Once the left side reaches the bottom, press the right side to make it reach the bottom, too. • Ensure the cassette is installed correctly. Sould the ribbon be bent or outside the cassette, rotate the know slowly towards the direction indicated by the arrow, until it is completely in the cassette. • For removing a worn-out ribbon, press the cassette at its right end marked with "Push".NOTEUse only original ink ribbon cassettes for an accurate printout and to avoid paper jams or damage to the printer.Installation 350-83917 Precisa Gravimetrics AGPower supply• Ensure the power adapter's converter matches with the local mains plug. • Ensure the printer's power switch is set to off.• Insert the power adapter's output plug into the printer's power jack. • Connect the power adapter to the mains. • Turn on the printer.Installing the paper roll• Ensure the printer is turned on. • Lift the paper cover.• Insert the paper shaft into the paper roll:• Insert the paper roll correctly:• Keep pressing LF while inserting the printer paper's end into the slot of the printing mechanism until it comes out at the ribbon side:NOTEUse only original printing paper to avoid paper jams or damage to the printer.350-8723 Operation Physical connection to the balance•Ensure both, balance and printer are turned off and disconnected from the mains.•Establish a physical connection with the appropriate data cable:[Balance] DB9f <=> DB9m [350-8672 Data cable] DB9f <=> DB9m [Printer][Balance] RJ45 <=> RJ45 [350-8557 Data cable] DB9f <=> DB9m [Printer]•Connect both, balance and printer to the mains.•Turn on first the balance, then the printer.OperationSetting the interface automaticallyFor a smooth data transfer, the printer is able to detect the interface settings of the balance and automatically accept them to match.•Ensure the physical connection between balance and printer is established properly, as described in the previous chapter.•Turn off the printer, hold LF, turn on the printer again and release LF as soon as the following message starts being printed out.•Press PRINT on the balance. The printer applies the interface settings of the balance and prints them out.•Confirm the settings by pressing LF.Setting the interface manuallyThe printer's interface can be set manually by meanings of the LP 4024 Setup tool, which is available at under support. This tool runs locally on every PC (no installation or driver needed) with Windows XP or higher.•Ensure the printer is turned off and disconnected from the mains.•Establish a physical connection between PC and printer:[PC] USB-A <=> USB-A [PN 3950-125 Data cable] USB-B <=> USB-B [Printer]As soon as the connection is established, the power indicator starts flashing red.•Start the LP 4024 Setup tool. The power indicator lights red, the tool detects the printer's interface settings and is ready:Precisa Gravimetrics AG 8Cleaning and storing the printer 350-83919Precisa Gravimetrics AG• Change the settings upon your requirements and finalise by klicking the "Set to Printer" button.• Disconnect the USB data cable. • Powercycle the printer.Cleaning and storing the printerCleaningDANGERBefore cleaning, ensure no power and data cables are connected to the printer. Be sure to hold the plug, not the cable, when disconnecting the printer from an electrical outlet!• For cleaning wipe the printer with a soft cloth, dampened with some water and mild, non abrasive detergent at most. • Take care that no liquid is split into the inside of the printer and on connections of the device. Should this although happen, keep it from inadvertent operation. The printer may only be operated again after a re-check made by a service technician.DANGEREnsure your hands are dry when connecting the power adapter to the mains for putting the printer into operation again.350-8723 Troubleshooting Precisa Gravimetrics AG 10 Storing• Turn off the printer after usage.• Disconnect the power adapter from the mains and from the printer when not using the printer for a longer time.• Store the printer in a dry place (at +5 .. +45°C, 10 .. 80% relative humidity, non condensing) in its original packaging.TroubleshootingCheck the following points before calling service:The power indicator doesn't light up when the power switch is turned on•Cause: The power adapter is not connected. Remedy: Connect the power adapter. •Cause: The power adapter does not receive power. Remedy: Supply power to the power adapter. •Cause: The power is not compatible with the printer. Remedy: Use a compatible power adapter. • Cause: The power adapter has failed.Remedy: Replace the power adapter.The printout is too pale• Cause: The ink ribbon is at the end of its lifetime.Remedy: Replace the ink ribbon.The printout is uneven• Cause: The ink ribbon is slanted.Remedy: Re-install the ink ribbon.Paper stuck in printer• Cause: Paper jam.Remedy: Cut out the spare printing paper and hold LF for taking out the spare paper.Sounds like printing, but no printout•Cause: The ink ribbon is slanted. Remedy: Re-install the ink ribbon. • Cause: No ink ribbon in printer.Remedy: Re-install the ink ribbon.The characters are not aligned•Cause: Paper jam. Remedy: Cut out the spare printing paper and hold LF for taking out the spare paper. • Cause: The printer paper is inserted incorrectly.Remedy: Re-install the printing paper referring to chapter "Installing the paper roll" on page 7.Troubleshooting350-8391 11 Precisa Gravimetrics AG •Cause: Incompatible printing paper. Remedy: Install compatible printing paper. • Cause: The hard roll inside the paper roll is missing.Remedy: Install compatible printing paper.The printout is unclear• Cause: Ink ribbon fault.Remedy: Replace the ink ribbon.Partially missing printout• Cause: The ink ribbon winkles.Remedy: Remove the ink ribbon cassette, pull out the ribbon core, and, when the ribbon is no longer folded, reinsert it by turning the ribbon gear clockwise, then reinstall the cassette. No printout• Cause: Incorrect cable connection between printer and instrument.Remedy: Re-install the data cable referring to chapter "Physical connection to the balance" on page 8.• Cause: The interface settings of the printer and balance do not match.Remedy: Ensure that the interface settings of the printer and the instrument match referring to chapter "Setting the interface automatically" or "Setting the interface manually" on page 8.。
2016新编CD系列引脚大全
常用4000系列标准数字电路的中文名称资料型号器件名称厂牌备注CD4000 双3输入端或非门+单非门 TICD4001 四2输入端或非门 HIT/NSC/TI/GOLCD4002 双4输入端或非门 NSCCD4006 18位串入/串出移位寄存器 NSCCD4007 双互补对加反相器 NSCCD4008 4位超前进位全加器 NSCCD4009 六反相缓冲/变换器 NSCCD4010 六同相缓冲/变换器 NSCCD4011 四2输入端与非门 HIT/TICD4012 双4输入端与非门 NSCCD4013 双主-从D型触发器 FSC/NSC/TOSCD4014 8位串入/并入-串出移位寄存器 NSCCD4015 双4位串入/并出移位寄存器 TICD4016 四传输门 FSC/TICD4017 十进制计数/分配器 FSC/TI/MOTCD4018 可预制1/N计数器 NSC/MOTCD4019 四与或选择器 PHICD4020 14级串行二进制计数/分频器 FSCCD4021 08位串入/并入-串出移位寄存器 PHI/NSCCD4022 八进制计数/分配器 NSC/MOTCD4023 三3输入端与非门 NSC/MOT/TICD4024 7级二进制串行计数/分频器 NSC/MOT/TICD4025 三3输入端或非门 NSC/MOT/TICD4026 十进制计数/7段译码器 NSC/MOT/TICD4027 双J-K触发器 NSC/MOT/TICD4028 BCD码十进制译码器 NSC/MOT/TICD4029 可预置可逆计数器 NSC/MOT/TICD4030 四异或门 NSC/MOT/TI/GOLCD4031 64位串入/串出移位存储器 NSC/MOT/TICD4032 三串行加法器 NSC/TICD4033 十进制计数/7段译码器 NSC/TICD4034 8位通用总线寄存器 NSC/MOT/TICD4035 4位并入/串入-并出/串出移位寄存 NSC/MOT/TI CD4038 三串行加法器 NSC/TICD4040 12级二进制串行计数/分频器 NSC/MOT/TICD4041 四同相/反相缓冲器 NSC/MOT/TICD4042 四锁存D型触发器 NSC/MOT/TICD4043 4三态R-S锁存触发器("1"触发) NSC/MOT/TI CD4044 四三态R-S锁存触发器("0"触发) NSC/MOT/TI CD4046 锁相环 NSC/MOT/TI/PHICD4047 无稳态/单稳态多谐振荡器 NSC/MOT/TICD4048 4输入端可扩展多功能门 NSC/HIT/TICD4049 六反相缓冲/变换器 NSC/HIT/TICD4050 六同相缓冲/变换器 NSC/MOT/TICD4051 八选一模拟开关 NSC/MOT/TICD4052 双4选1模拟开关 NSC/MOT/TICD4053 三组二路模拟开关 NSC/MOT/TICD4054 液晶显示驱动器 NSC/HIT/TICD4055 BCD-7段译码/液晶驱动器 NSC/HIT/TI CD4056 液晶显示驱动器 NSC/HIT/TICD4059 “N”分频计数器 NSC/TICD4060 14级二进制串行计数/分频器 NSC/TI/MOT CD4063 四位数字比较器 NSC/HIT/TICD4066 四传输门 NSC/TI/MOTCD4067 16选1模拟开关 NSC/TICD4068 八输入端与非门/与门 NSC/HIT/TICD4069 六反相器 NSC/HIT/TICD4070 四异或门 NSC/HIT/TICD4071 四2输入端或门 NSC/TICD4072 双4输入端或门 NSC/TICD4073 三3输入端与门 NSC/TICD4075 三3输入端或门 NSC/TICD4076 四D寄存器CD4077 四2输入端异或非门 HITCD4078 8输入端或非门/或门CD4081 四2输入端与门 NSC/HIT/TICD4082 双4输入端与门 NSC/HIT/TICD4085 双2路2输入端与或非门CD4086 四2输入端可扩展与或非门CD4089 二进制比例乘法器CD4093 四2输入端施密特触发器 NSC/MOT/STCD4094 8位移位存储总线寄存器 NSC/TI/PHICD4095 3输入端J-K触发器CD4096 3输入端J-K触发器CD4097 双路八选一模拟开关CD4098 双单稳态触发器 NSC/MOT/TICD4099 8位可寻址锁存器 NSC/MOT/STCD40100 32位左/右移位寄存器CD40101 9位奇偶较验器CD40102 8位可预置同步BCD减法计数器CD40103 8位可预置同步二进制减法计数器CD40104 4位双向移位寄存器CD40105 先入先出FI-FD寄存器CD40106 六施密特触发器 NSC\TICD40107 双2输入端与非缓冲/驱动器 HAR\TICD40108 4字×4位多通道寄存器CD40109 四低-高电平位移器CD40110 十进制加/减,计数,锁存,译码驱动 STCD40147 10-4线编码器 NSC\MOTCD40160 可预置BCD加计数器 NSC\MOTCD40161 可预置4位二进制加计数器 NSC\MOTCD40162 BCD加法计数器 NSC\MOTCD40163 4位二进制同步计数器 NSC\MOTCD40174 六锁存D型触发器 NSC\TI\MOTCD40175 四D型触发器 NSC\TI\MOTCD40181 4位算术逻辑单元/函数发生器CD40182 超前位发生器CD40192 可预置BCD加/减计数器(双时钟) NSC\TICD40193 可预置4位二进制加/减计数器 NSC\TICD40194 4位并入/串入-并出/串出移位寄存 NSC\MOT CD40195 4位并入/串入-并出/串出移位寄存 NSC\MOT CD40208 4×4多端口寄存器CD4501 4输入端双与门及2输入端或非门CD4502 可选通三态输出六反相/缓冲器CD4503 六同相三态缓冲器CD4504 六电压转换器CD4506 双二组2输入可扩展或非门CD4508 双4位锁存D型触发器CD4510 可预置BCD码加/减计数器CD4511 BCD锁存,7段译码,驱动器CD4512 八路数据选择器CD4513 BCD锁存,7段译码,驱动器(消隐)CD4514 4位锁存,4线-16线译码器CD4515 4位锁存,4线-16线译码器CD4516 可预置4位二进制加/减计数器CD4517 双64位静态移位寄存器CD4518 双BCD同步加计数器CD4519 四位与或选择器CD4520 双4位二进制同步加计数器CD4521 24级分频器CD4522 可预置BCD同步1/N计数器CD4526 可预置4位二进制同步1/N计数器CD4527 BCD比例乘法器CD4528 双单稳态触发器CD4529 双四路/单八路模拟开关CD4530 双5输入端优势逻辑门CD4531 12位奇偶校验器CD4532 8位优先编码器CD4536 可编程定时器CD4538 精密双单稳CD4539 双四路数据选择器CD4541 可编程序振荡/计时器CD4543 BCD七段锁存译码,驱动器CD4544 BCD七段锁存译码,驱动器CD4547 BCD七段译码/大电流驱动器CD4549 函数近似寄存器CD4551 四2通道模拟开关CD4553 三位BCD计数器CD4555 双二进制四选一译码器/分离器CD4556 双二进制四选一译码器/分离器CD4558 BCD八段译码器CD4560 "N"BCD加法器CD4561 "9"求补器CD4573 四可编程运算放大器CD4574 四可编程电压比较器CD4575 双可编程运放/比较器CD4583 双施密特触发器CD4584 六施密特触发器CD4585 4位数值比较器CD4599 8位可寻址锁存器CD22100 4×4×1交叉点开关电力安全月工作总结[电力安全月工作总结]电力安全月工作总结2011年3月1日至3月31日为我公司的安全生产月，**变电站围绕;夯实基储提高素质、树立标杆、争创一流;的主题，开展了丰富多彩、形式多样的具体行动：通过看板形式宣传安全第一、预防为主的方针；通过48+4的学习机会，进行安全生产大讨论；通过安全活动进行查找本站的隐患的活动，电力安全月工作总结。
Motorola 3.5 kHz 产品说明书
RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。
润滑油质量标准和检验
4. 酸值：中和1g润滑油中的酸所消耗的KOH的量，单位为mgKOH／g。
5. 水溶性酸或碱（又称反应）：取50m合后，在分液 漏斗中震荡抽提，分离出抽提水层。⑴用酸度计测定水溶性酸或碱：向烧杯中注入30~50ml抽 提物，电极浸入深度为10~12mm，按酸度计的使用要求测定PH值。根据下表确定试样抽提物中 有无水溶性酸或碱，石油产品水（或乙醇水溶液）抽提物特性PH值，酸性<4.5，弱酸性 4.5~5.0，无水溶性酸或碱5.0~9.0，碱性˃10.0。⑵用指示剂测定水溶性酸或碱，甲基橙： 酸；酚酞：碱。仲裁试验方法用⑴
方法概要：将30g试油放在规定的氧化管中，在125℃和有金属催化的条件下，使油品氧 化，本方法分两种条件进行，一种是在缓和的氧化条件下以润滑油氧化所形成的水溶性酸 （包括挥发的和不挥发的）的含量来表示，另一种是以润滑油在深度氧化条件下所形成的沉 淀物重量百分数和酸值来表示。
缓和氧化条件测定是在氧化管中放油样时，也放入铜球和钢球各一个，然后放入 125℃±0.5℃的油浴中，用橡皮管将氧化管的支管与装有20ml蒸馏水的吸收并连接起来，然 后通入洁净空气（50ml/分），经过4小时氧化测定油样氧化段产生的水溶性酸。该值越大， 说明该油品的抗氧化能力越差。
4YCC系列单包装可转换气电热炉产品说明书
Single Packaged Convertible Gas/Electric14SEER2–5Ton4YCC4024A1060A 4YCC4030A1070A 4YCC4036A1070A 4YCC4036A1090A 4YCC4042A1060A 4YCC4042A1090A 4YCC4048A1070A 4YCC4048A1090A 4YCC4060A1090A4YCC4060A1115AJune201922-1901-1H-E NTable of ContentsSingle Packaged ConvertibleGas/Electric SystemsTrane offers a complete family of packaged gas/electric heating and cooling systems,designed toprovide the unbeatable combination of energy efficiency and lower operating costs.In warmweather,the package gas/electric system functions as an all-electric,high efficiency airconditioner.In cold weather,it operates as a natural gas or propane gas furnace,offering thebest of both energy worlds.B e c a u s e c o o l i n g a n d h e a t i n g f u n c t i o n s a r e a l l c o n t a i n e d i n a s i n g l e c a b i n e t,a s i n g l ep a c k a g e d c o n v e r t i b l e g a s/e l e c t r i c s y s t e m i s e a s y t o i n s t a l l a n d s e r v i c e.It can be flush mounted beside your home at ground level or placed on the roof for horizontal ordownflow installation.When connected to an optional American Standard thermostat control,and air distribution ducts,you have a highly efficient,total home comfort system.S i n g l e P a c k a g e d C o n v e r t i b l e G a s/E l e c t r i c S y s t e m s a r e u n m a t c h e d i n q u a l i t y a n dr e l i a b i l i t y.All major components on these products,including the compressor,have been designed andmanufactured for maximum service.Every compressor is designed and manufactured toexacting specifications.Each design is life tested in extreme environments to ensure reliable andlong lasting operation in normal applications.Each compressor has internal motor protection foradded reliability.S i n g l e P a c k a g e d C o n v e r t i b l e G a s/E l e c t r i c S y s t e m s p r o v i d e b e t t e r p e r f o r m a n c e.Our single packaged cooling/heating units offer cooling/heating efficiencies that are unmatchedin the industry and provide you with a product far superior in performance than the competition.Optional Equipment Listing(a)Must use internal filter frame when economizer or fresh air kit is used.(b)It is the responsibility of the installing dealer to properly size the ductwork for each specific application.(c)Dry bulb control standard with economizer.(d)Downflow only.(e)Must be selected per unit and heater modelProduct Specifications(a)Rated in accordance with AHRI Standard210/240.AHRI standard rating conditions are:80D.B.67W.B.entering air to indoor coil.95D.B.entering air tooutdoor coil.(b)Sound Power values are not adjusted for AHRI270–95tonal corrections.(c)Ratings shown are for elevations up to2000ft.For higher elevations reduce ratings at a rate of4%per1000ft.elevation.(d)Convertible to LPG.(e)This value is approximate.For more precise value,see Unit Nameplate.(f)Standard Air—Dry Coil—Outdoor.(g)Based on ernment Standard Tests.(h)Filters must be installed in return air stream.Square footages listed are based on300f.p.m.face velocity.If permanent filters are used size permanufacturer’s recommendation with a clean resistance of0.05”W.C.(a)Rated in accordance with AHRI Standard210/240.AHRI standard rating conditions are:80D.B.67W.B.entering air to indoor coil.95D.B.entering air tooutdoor coil.(b)Sound Power values are not adjusted for AHRI270–95tonal corrections.(c)Ratings shown are for elevations up to2000ft.For higher elevations reduce ratings at a rate of4%per1000ft.elevation.(d)Convertible to LPG.(e)This value is approximate.For more precise value,see Unit Nameplate.(f)Standard Air—Dry Coil—Outdoor.(g)Based on ernment Standard Tests.(h)Filters must be installed in return air stream.Square footages listed are based on300f.p.m.face velocity.If permanent filters are used size permanufacturer’s recommendation with a clean resistance of0.05”W.C.(a)Rated in accordance with AHRI Standard210/240.AHRI standard rating conditions are:80D.B.67W.B.entering air to indoor coil.95D.B.entering air tooutdoor coil.(b)Sound Power values are not adjusted for AHRI270–95tonal corrections.(c)Ratings shown are for elevations up to2000ft.For higher elevations reduce ratings at a rate of4%per1000ft.elevation.(d)Convertible to LPG.(e)This value is approximate.For more precise value,see Unit Nameplate.(f)Standard Air—Dry Coil—Outdoor.(g)Based on ernment Standard Tests.(h)Filters must be installed in return air stream.Square footages listed are based on300f.p.m.face velocity.If permanent filters are used size permanufacturer’s recommendation with a clean resistance of0.05”W.C.Indoor Fan Performance Table1.Horizontal AirflowTable2.Down AirflowTable3.Horizontal AirflowTable4.Down AirflowTable4.Down Airflow(continued)Table5.Horizontal AirflowTable6.Down AirflowTable6.Down Airflow(continued)Table7.Horizontal AirflowTable7.Horizontal Airflow(continued)Table8.Down AirflowTable9.Horizontal AirflowTable9.Horizontal Airflow(continued)Table10.Down AirflowTable11.Horizontal AirflowTable12.Down AirflowTable12.Down Airflow(continued)Field Wiring DiagramFigure 1.4YCC4—Field Wiring DiagramCONTACTOR/COMPRESSOR/FAN Notes:1. FUSED DISCONNECT SIZE, POWER WIRING AND GROUNDING OF EQUIPMENT MUST COMPLY WITH CODES.2. BE SURE POWER SUPPLY AGREES WITH EQUIPMENT AND HEATER NAMEPLATE.3. LOW VOLTAGE WIRING TO BE 18 AWG MINIMUM CONDUCTOR.4. SEE UNIT DIAGRAM FOR ELECTRICAL CONNECTION DETAILS. ONLY FROM THE THERMOSTAT.6. FOR SINGLE STAGE THERMOSTATS, JUMPER W1 AND W2 TOGETHER. SECOND STAGE HEAT WILL BEGIN 10 MINUTES AFTER FIRST STAGE.DWG. C757192REVAWiring—4YCC4Figure2.4YCC4024–042Figure3.4YCC4024–042。
雷尼希亚RMP60机械工具接触测试探头系统说明书
• 2.4 GHz radio transmission, allows single system forworldwide use.• Interference-free channel hopping transmission.• No channel selection required. • RMP60 meets the radio regulations of:Europe: CE 0536! USA: FCC ID: KQGRMP60, FCC ID: KQGRMP60V2 FCC ID: KQGRMP60MV2 Japan: RMP60: 004NYCA0042, RMP60: 004NYCA0406 RMP60M: 004NYCA0407Canada: IC: 3928A-RMP60, IC: 3928A-RMP60V2Australia, China, Israel, New Zealand, Russia, Switzerlandand India.• Partner RMP60 and RMI systems allow interference-freemultiple probe installations.• The RMP60 is suitable for use with Renishaw single anddouble touch probing cycles.• User adjustable trigger force for long/cranked styli. • A weak link is included in each kit to protect the probein the event of excessive stylus overtravel, when using steel styli.• The RMP60 is a compact 3D touch-trigger probe(±X, ±Y , +Z sense directions) with radio transmission, used for workpiece set-up and inspection on small to large CNC machining centres and vertical turret lathes.• The RMP60 transmits omnidirectionally with a range of15 m (49.2 ft).• Ease of installation.• A standard battery life of 140 hours continuous use, orthe equivalent of approximately 100 days at 5 % usage is achievable. For applications requiring greater battery life, certain high capacity lithium thionyl chloride batteries can be used.• Repeatability, 1.0 µm (40 µin) is certified at480 mm/min (1.57 ft/min) with 50 mm stylus.• Probe switch on is user configurable between M code, spinor shank.• Probe switch off is user configurable between M code,time, spin or shank switch dependant on turn on method.StylusData sheet H-2000-2122-03-A A Tech Authoirty, Inc3857 Schaefer Ave, Ste C Chino, CA. 91710 (909)972-7520Operating envelope - RMP60/RMIThe RMP60 transmission envelope and range is shown below.The probe system should be positioned so that the optimum range can be achieved over the full travel of the machine’s axes including the tool magazine. Always face the RMI in the direction of the machine spindle and tool magazine. If the probe is not in range when in the tool magazine use spin or shank turn on.The RMP60 and RMI must be within a mutual operating envelope. The operating envelope shows line-of-sight performance. However, radio transmission does not require line-of-sight as long as any reflected radio path is less than the 15 m (49.2 ft) system operating range.RMP60 probeRange metres (feet)OPERATING AND SWITCH ON/OFF75°0°15°90°75°60°75°0°19 (0.75)50 (1.97)RMP60 dimensionsdimensions mm (in)ZData sheetRMP60 - radio probeBattery dead - at this stage probe status is forced open and the probe cycle will stop.System operationPrior to probe operation, it is imperative that the program selected to ‘drive’ the probe has been verified. Incorrect programming could result in damage to the machine, workpiece and probe system.The RMP60 probe operates in one of three modes:1. Stand-by mode - The RMP60 uses a small current,while waiting for a switch-on signal to be received.2. Operating mode - Activated by one of the methodsdescribed below. Signals are only transmitted by the probe in this mode and the probe is now ready for use.3. Configuration mode - Trigger Logic™ allows a numberof probe set-up options to be programmed, by triggering the probe when the batteries are inserted. Programmableoptions are described on the next page.Probe environmentPrimary application Inspection probe for machiningcentres Sense directions 5 way ±X ±Y +ZWeight (without a shank) with batteries without batteries901 g (31.79 oz) 855 g (30.16 oz)Trigger force using 50 mm (1.97 in) stylus low force direction factory settingX Y 0.75 N / 75 gf (2.65 ozf)Z 5.30 N / 530 gf (18.69 ozf)Trigger force using 50 mm (1.97 in) stylus high force directionX Y 1.4 N / 140 gf (4.94 ozf)Z 5.30 N / 530 gf (18.69 ozf)Max. spin speed 1000 rev/minOvertravel X Y 18°Z 11 mm (0.43 in)Sealing IPX8 (BS 5490, IEC 529)1 atmosphereRepeatability maximum 2σ value in any direction 1.0 µm (0.00004 in) is valid fortest velocity of 480 mm/min(1.57 ft/min) at stylus tip, usingstylus 50 mm (1.97 in) long.Probe specificationProbe status LEDsWhen operating the probe status LEDs give a visual indication of the probe state (triggered or seated) and battery condition.Multiple probe modeRMP60 can be user configured using T rigger Logic™ to allow multiple RMP60s to be used with a single RMI.Notes:Radio turn on cannot be used in multiple probe mode. RMP60s set to ‘mode-on’ can coexist alongside any number of RMP60’s set to ‘mode-off’.To allow multiple probes/single RMI in close proximity, 16 choices of ‘mode-on’ colours are available – each representing a different machine tool installation.Only one of the multiple probes per machine will need partnering as, by configuring multiple probes to a single‘mode-on’ choice, all probes have the same identification. The probe to be partnered is partnered after selection of multiple probe on mode.There is no limit to the number of probes that can be used with a single RMI as long as they all have the same ‘mode-on’ colour choice.All RMP60s are factory-set to ‘mode off’.The addition of further probe(s) into a single probe installation requires all probes to be re-configured to the same multiple probe ‘mode-on’ choice and the repartnering of one of the probes to the installed RMI.The addition of further probes (or replacements) into a multi probe installation is achieved simply by reconfiguration to the same ‘mode-on’ colour choice.Comprehesive details of how to set-up and change mutiple probe settings are included in the RMP60 installation and user's guide, H-2000-5219.RMP60/RMI Temperature Storage -10 °C to 70 °C (14 °F to 158 °F)Normal operating5 °C to 50 °C (41 °F to 122 °F)Notes:The RMP60 will be turned on after 1 sec in all modes.)After being turned on, the RMP60 must be on for a minimum of 1 sec (7 seconds for spin option) before being turned off. In radio on configuration (either radio on/radio off or radio on/time off) the RMP60 has a built-in hibernate mode. This saves battery life when the RMP60 is in stand-by and the RMI is un-powered (or out of range).The RMP60 goes into hibernate mode 30 sec after the RMI is un-powered (or out of range). When in this mode, the RMP60 checks for a powered RMI every 30 secs, if the RMI is found, the RMP60 goes from the hibernate mode to stand-by, ready for radio turn on.Probe switch on and offThe probe is switched on by one of the following options.All options are user configurable.RMP60 switch-on method.Switch-on options are configurable.RMP60 switch-off method.Switch-off options are configurable.1. Radio onRadio switch on is commanded by M code. (factory setting).1. Radio offRadio switch-off is commanded by M code. (factory setting).A timer automatically switches the probe off after 90 min from the last trigger, if not turned off by M code.2. Timer off (time out)The RMP60 will time out (12, 33 or 134 sec - user configurable) after the last probe trigger or reseat.2. Spin startSpin at 650 rev/min for 1 sec minimum (6 sec maximum).3. Spin stopSpin at 650 rev/min for 1 sec minimum (6 sec maximum).A timer automatically switches the probe off after 90 min from last trigger off.4. Timer off (time out)The RMP60 will time out (12, 33 or 134 sec - userconfigurable) after the last probe trigger or reseat.3. Shank switch5. Shank switch offBattery life expectancyTypical battery reserve lifeUsing the standard alkaline battery at 5% usage, typically the probe will continue to operate for approximately 1 week after a low battery warning is first indicated.Replace the batteries as soon as is practicable.Rechargeable batteries: either nickel metal hydride (NiMh) or nickel cadnium (NiCd) can be used, but expect a battery life of approximately 50% of the alkaline figures given in the table below.To achieve stated radio stand-by life, the RMP60 must be in-range of a powered partner RMI.Battery Shank/spin turn onRadio turn on Continuous useTwo AA type Stand-by life (days - typical)5% usage 72 minutes/day (days - typical)Stand-by life (days - typical)5% usage 72 minutes/day (days - typical)(hours - typical)Alkaline65010013065140Lithium ThionylChloride1300200260130280For applications requiring greater battery life, certain high capacity lithium thionyl chloride batteries can be used.Data sheetRMP60 - radio probe(Ø2.48)RMP60M is a special modular version of RMP60. It enables probe inspection of part features inaccessible to RMP60, by fitting selected adaptors and extensions as shown.RMP60M modular systemRMP60M dimensions40.75 50.00 / 100.00 / 150.00 66.25 (Ø2.48)100.00 / 150.00 / 200.00 50.50 (Ø2.48)66.25Parts list - Please quote the Part no. when ordering equipment.TypePart no.DescriptionRMP60A-4113-0001RMP60 probe with batteries, tool kit and user’s guide (factory set to radio on/radio off).RMP60M module A-4113-1003RMP60M probe with batteries, tool kit and user’s guide (factory set to radio on/radio off).Battery P-BT03-0005AA battery - Alkaline type supplied as standard with probe (two required).Battery P-BT03-0008AA battery - Lithium thionyl chloride (two required).Stylus A-5000-3709PS3-1C ceramic stylus 50 mm long with Ø6 mm ball.Weak link kit A-2085-0068Weak link (Part no. M-2085-0069 x 2) and 5 mm AF spanner.Tool kit A-4038-0304Probe tool kit comprising: Ø1.98 mm stylus tool, 2.0 mm AF hexagon key,2.5 mm AF hexagon key (x 2), 4 mm AF hexagon key, and shank grub screws (x 2).Diaphragm kit A-4038-0302RMP60 outer diaphragm.Battery cassette A-4038-0300RMP60 battery cassette assembly.Cassette seal A-4038-0301Battery cassette housing seal.Bobbin kit A-4038-0303Bobbin for shank switch (supplied with shank).RMI A-4113-0050RMI, side exit, with 15 m (49.2 ft) cable, tool kit and user’s guide.Mtg brkt A-2033-0830Mounting bracket with fixing screws, washers and nuts.Extension L100A-4038-1010RMP60M extension - 100 mm long.Extension L150A-4038-1027RMP60M extension - 150 mm long.Extension L200A-4038-1028RMP60M extension - 200 mm long.Probe module A-4038-1002RMP60M probe module assembly.RMP60/LP2 adaptor A-4038-0212RMP60M LP2 adaptor assembly.LPE1A-2063-7001LPE1 extension bar - 50 mm long.LPE2A-2063-7002LPE2 extension bar - 100 mm long.LPE3A-2063-7003LPE3 extension bar - 150 mm long.MA4A-2063-7600MA4 90° adaptor assembly.RMP60 user’s guide H-2000-5219RMP60 user’s guide.Styli –See brochure H-1000-3200 Styli and accessories.Software –See data sheet H-2000-2289 Probe software for machine tools.Shanks –See data sheet H-2000-2011 Shanks.RMI–See data sheet H-2000-2123 RMI.Renishaw plcNew Mills, Wotton-under-Edge, Gloucestershire GL12 8JR United KingdomT +44 (0)1453 524524F +44 (0)1453 524901E ***************© 2006 Renishaw plc. All rights reserved. Renishaw reserves the right to change specifications without noticeIssued 11.06 Part no. H-2000-2122-03-AFor worldwide contact details, please visit ourmain web site at /contact*H-2000-2122-03*。
口腔医学本科毕业生就业现状及影响因素的问卷调查
基金项目!./0@ 年 福 建 医 科 大 学 启 航 基 金 项 目 )./0@U_00/7,.福建省教 育 科 学 * 十 四 五+ 规 划 ./.. 年 度 课 题 )SFFjIj..>07.,../.. 年 福 建 医 科 大 学 辅 导 员 工 作 精 品 项 目 )./..FY/00, %
通讯作者!"#$%&!@.??./?7/1**4'(#
表 0!近 3 年口腔医学本科毕业生一般人口学特征
特征
毕业生就业情况# #) , $
.
"
否
是
性别
!女
@).042., @0)6040., 54/. /4/3
!男
.7)?@43@, 002)5@4@@,
政治面貌
!党员
.?)?.47?, 06@)?5403, /4/@ /4?@
.36 名口腔医学本科毕业生进行调查 结果学生干部经历组织与协调能力自主学习能力和情绪管理能力的 ,*
75-.值分别为 3452043? E74.374??0463 E224?.245.04.3 E3642/和 @4/?0403 E5?450结论学生
干部经历组织与协调能力自主学习能力和情绪管理能力对口腔医学本科毕业生就业有积极作用
表 .!近 3 年口腔医学本科毕业生能力素质评价$c%
能力指标 专业知识 专业技能 职业道德 敬业精神 审美能力 团队协作能力 服务意识 组织与协调能力 人际沟通能力 文字写作能力 口头表达能力 自主学习能力 创新创业能力 情绪管理能力 分 析& 解 决 问 题 能力 外语应用能力 科研能力 身体素质
MTBE丁烯-1装置工艺技术规程
MTBE丁烯-1装置工艺技术规程目录1 装置简要阐明错误!未定义书签。
1.1 概况错误!未定义书签。
1.2 术语、符号、代号错误!未定义书签。
1.3 主要工艺技术特点错误!未定义书签。
1.4 主要设计指标错误!未定义书签。
2 工艺过程简述及工艺原则流程图错误!未定义书签。
2.1 MTBE单元工艺描述错误!未定义书签。
2.2 丁烯-1单元工艺描述错误!未定义书签。
3 主要工艺指标(以现行工艺卡片为准) 错误!未定义书签。
4 主要动力指标错误!未定义书签。
4.1 公用工程设计消耗一览表错误!未定义书签。
4.2 公用工程介质规格错误!未定义书签。
5 产品、中间产品错误!未定义书签。
5.1 MTBE产品性质错误!未定义书签。
5.2 丁烯-1产品性质错误!未定义书签。
5.3 产品、中间产品设计构成及指标错误!未定义书签。
5.4 副产品错误!未定义书签。
6 主要原料及化工原材料质量指标错误!未定义书签。
6.1 主要原料错误!未定义书签。
6.2 化工原材料错误!未定义书签。
7 装置开、停工方案错误!未定义书签。
7.1 装置动工方案错误!未定义书签。
7.2 装置停工方案错误!未定义书签。
8 事故处理错误!未定义书签。
8.1 事故处理旳原则错误!未定义书签。
8.2 紧急停工错误!未定义书签。
8.3 事故处理错误!未定义书签。
9 仪表控制方案及主要仪表性能错误!未定义书签。
9.1 仪表控制方案错误!未定义书签。
9.2 装置联锁错误!未定义书签。
9.3 控制阀一览表错误!未定义书签。
10 主要设备一览表及主要设计参数错误!未定义书签。
10.1 塔器类错误!未定义书签。
10.2 反应器类错误!未定义书签。
10.3 容器类错误!未定义书签。
10.4 换热设备类错误!未定义书签。
10.5 泵类错误!未定义书签。
10.6 其他设备类错误!未定义书签。
1 装置简要阐明1.1 概况中国石化股份有限企业武汉分企业8/3万吨/年MTBE/丁烯-1装置是80万吨/年乙烯及其配套工程中旳一部分, 本装置采用来自乙烯裂解装置旳裂解液化气经丁二烯抽提后作为原料, 生产MTBE和丁烯-1产品。
三极管型号
型号功能简述1710 视频信号处理集成电路2274 延迟集成电路2800 红外遥控信号接收集成电路4094 移位寄存串入、并出集成电路4260 动态随机存储集成电路4464 存储集成电路4558 双运算放大集成电路5101 天线开关集成电路15105 充电控制集成电路15551 管理卡升压集成电路31085 射频电源集成电路74122 可重触发单稳态集成电路85712 场扫描信号校正处理集成电路85713 行扫描信号校正集成电路0206A 天线开关集成电路03VFG9 发射压控振荡集成电路1021AC 发射压控振荡集成电路1097C 升压集成电路140N 电源取样比较放大集成电路14DN363 伺服控制集成电路1N706 混响延时集成电路20810-F6096 存储集成电路2252B 微处理集成电路24C01ACEA 存储集成电路24C026 存储集成电路24C04 存储集成电路24C64 码片集成电路24LC16B 存储集成电路24LC65 电可改写编程只读存储集成电路27C1000PC-12 存储集成电路27C2000QC-90 存储集成电路27C20T 存储集成电路27C512 电可改写编程只读存储集成电路28BV64 码片集成电路28F004 版本集成电路32D54 电源、音频信号处理集成电路32D75 电源、音频信号处理集成电路32D92 电源中频放大集成电路4066B 电子开关切换集成电路424260SDJ 存储集成电路4270351/91B9905 中频放大集成电路4370341/90M9919 中频处理集成电路4580D 双运算放大集成电路47C1638AN-U337 微处理集成电路47C1638AU-353 微处理集成电路47C432GP 微处理集成电路47C433AN-3888 微处理集成电路49/4CR1A 中频放大集成电路5G052 发光二极管四位显示驱动集成电路5G24 运算放大集成电路5W01 双运算放大集成电路649/CRIA70612 中频放大集成电路673/3CR2A 多模转换集成电路74HC04 逻辑与非门集成电路74HC04D 六反相集成电路74HC123 单稳态集成电路74HC125 端口功能扩展集成电路74HC14N 六反相集成电路74HC157A 多路转换集成电路74HC165 移相寄存集成电路74HC245 总线收发集成电路74HC32 或门四2输入集成电路74HC374八D 触发集成电路74HC573D 存储集成电路74HCT157 多路转换双输入集成电路74HCT4046A 压控振荡集成电路74HCT4538D 单稳态集成电路74HCT4538N 触发脉冲集成电路74HCT86D 异或门四2输入集成电路74HCU04 与非门集成电路74LS125 端口功能扩展集成电路74LS373 锁存集成电路74LS393 计数双四位二进制集成电路74LS74双D 触发集成电路78014DFP 系统控制处理集成电路811N 伴音阻容偏置集成电路83D33 压控振荡集成电路87C52 微处理集成电路87CK38N-3584 微处理集成电路87CK38N-3627 微处理集成电路89C52 系统控制处理集成电路89C55 系统控制处理集成电路93C66 电可改写编程只读存储集成电路93LC56 电可改写编程存储集成电路9821K03 系统控制集成电路A1642P 背景歌声消除集成电路A701 红外遥控信号接收集成电路A7950 场频识别集成电路A8772AN 色差信号延迟处理集成电路A9109 功率放大集成电路AAB 电源集成电路ACA650 色度信号解调集成电路ACFP2 色度、亮度信号分离集成电路ACP2371 多伴音、多语言改善集成电路ACVP2205 色度、亮度信号分离集成电路AD1853 立体声数/模转换集成电路AD1858 音频解调集成电路AD722 视频编码集成电路ADC2300E 音频数/模转换集成电路ADC2300J 音频数/模转换集成电路ADC2310E 音频数/模转换集成电路ADV7172 视频编码集成电路ADV7175A 视频编码集成电路AE31201 频率显示集成电路AJ7080 射频调制集成电路AK4321-VF-E1 音频数/模转换集成电路AN1319 双高速电压比较集成电路AN1358S 双运算放大集成电路AN1393 双运算放大集成电路AN1431T 稳压电源集成电路AN1452 音频前置放大集成电路AN1458S 双运算放大集成电路AN206 伴音中频及前置放大集成电路AN222 自动频率控制集成电路AN236 副载波信号处理集成电路AN239Q 图像、伴音中频放大集成电路AN247P 图像中频放大、AGC控制集成电路AN253P 调频/调幅中频放大集成电路AN262 音频前置放大集成电路AN2661NK 视频信号处理集成电路AN2663K 视频信号处理集成电路AN272 音频功率放大集成电路AN2751FAP 视频信号处理集成电路AN281 色度解码集成电路AN2870FC 多功能控制集成电路AN295 行、场扫描信号处理集成电路AN301 伺服控制集成电路AN305 视频自动增益控制集成电路AN306 色度自动相位控制集成电路AN318 直流伺服控制集成电路AN320 频率控制、调谐显示驱动集成电路AN3215K 视频信号处理集成电路AN3215S 视频信号处理集成电路AN3224K 磁头信号记录放大集成电路AN3248NK 亮度信号记录、重放处理集成电路AN331 视频信号处理集成电路AN3311K 磁头信号放大集成电路AN3313 磁头信号放大集成电路AN3321S 录像重放信号处理集成电路AN3331K 磁头信号处理集成电路AN3337NSB 磁头信号放大集成电路AN3380K 磁头信号处理集成电路AN3386NK 磁头信号处理集成电路AN3495K 色度、亮度信号降噪集成电路AN355 伴音中频放大、检波集成电路AN3581S 视频驱动集成电路AN366 调频/调幅中频放大集成电路AN3791 移位控制集成电路AN3792 磁鼓伺服控制接口集成电路AN3795 主轴伺服控制接口集成电路AN3814K 电机驱动集成电路AN4265 音频功率放大集成电路AN4558 运算放大集成电路AN5010 电子选台集成电路AN5011 电子选台集成电路AN5015K 电子选台集成电路AN5020 红外遥控信号接收集成电路AN5025S 红外遥控信号接收集成电路AN5026K 红外遥控信号接收集成电路AN5031 电调谐控制集成电路AN5034 调谐控制集成电路AN5036 调谐控制集成电路AN5043 调谐控制集成电路AN5071 频段转换集成电路AN5095K 电视信号处理集成电路AN5110 图像中频放大集成电路AN5130 图像中频、视频检波放大集成电路AN5138NK 图像、伴音中频放大集成电路AN5156K 电视信号处理集成电路AN5177NK 图像、伴音中频放大集成电路AN5179K 图像、伴音中频放大集成电路AN5183K 中频信号处理集成电路AN5195K 中频、色度、扫描信号处理集成电路AN5215 伴音信号处理集成电路AN5222 伴音中频放大集成电路AN5250 伴音中频放大、鉴频及功率放大集成电路AN5262 音频前置放大集成电路AN5265 音频功率放大集成电路AN5270 音频功率放大集成电路AN5273 双声道音频功率放大集成电路AN5274 双声道音频功率放大集成电路AN5275 中置、3D放大集成电路AN5285K 双声道前置放大集成电路AN5295NK 音频信号切换集成电路AN5312 视频、色度信号处理集成电路AN5313NK 视频、色度信号处理集成电路AN5342 图像水平轮廓校正集成电路AN5342FB 水平清晰度控制集成电路AN5344FBP 色度信号处理集成电路AN5348K 人工智能信号处理集成电路AN5385K 色差信号放大集成电路AN5410 行、场扫描信号处理集成电路AN5421 同步检测集成电路AN5422 行、场扫描信号处理集成电路AN5512 场扫描输出集成电路AN5515 场扫描输出集成电路AN5520 伴音中频放大及鉴频集成电路AN5521 场扫描输出集成电路AN5532 场扫描输出集成电路AN5534 场扫描输出集成电路AN5551 枕形校正集成电路AN5560 场频识别集成电路AN5600K 中频、亮度、色度及扫描信号处理集成电路AN5601K 视频、色度、同步信号处理集成电路AN5607K 视频、色度、行场扫描信号处理集成电路AN5615 视频信号处理集成电路AN5620X 色度信号处理集成电路AN5621 场扫描输出集成电路AN5625 色度信号处理集成电路AN5633K 色度信号处理集成电路AN5635 色度解码集成电路AN5635NS 色度解码集成电路AN5637 色度解码、亮度延迟集成电路AN5650 同步信号分离集成电路AN5682K 基色电子开关切换集成电路AN5693K 视频、色度、行场扫描信号处理集成电路AN5712 图像中频放大、AGC控制集成电路AN5722 图像中频放大、检波集成电路AN5732 伴音中频放大、鉴频集成电路AN5743 音频功率放大集成电路AN5750 行自动频率控制及振荡集成电路AN5757S 行扫描电源电压控制集成电路AN5762 场扫描振荡、输出集成电路AN5764 光栅水平位置控制集成电路AN5765 电源稳压控制集成电路AN5767 同步信号处理集成电路AN5768 光栅倾斜校正控制集成电路AN5769 行、场会聚控制集成电路AN5790N 行扫描信号处理集成电路AN5791 同步脉冲相位与脉宽调整集成电路AN5803 双声道立体声解调集成电路AN5836 双声道前置放大集成电路AN5858K 视频信号控制集成电路AN5862 视频信号控制集成电路AN5862S-E1 视频信号开关控制集成电路AN5870K 模拟信号切换集成电路AN5891K 音频信号处理集成电路AN614 行枕形校正集成电路AN6210 双声道前置放大集成电路AN6306S 亮度信号处理集成电路AN6308 模拟电子开关集成电路AN6327 视频重放信号处理集成电路AN6341N 伺服控制集成电路AN6342N 基准分频集成电路AN6344 伺服控制集成电路AN6345 分频集成电路AN6346N 磁鼓伺服控制集成电路AN6350 磁鼓伺服控制集成电路AN6357N 主轴接口集成电路AN6361N 色度信号处理集成电路AN6367NK 色度信号处理集成电路AN6371S 自动相位控制集成电路AN6387 电机伺服控制集成电路AN6550 卡拉OK音频放大集成电路AN6554 四运算放大集成电路AN6561 双运算放大集成电路AN6562SG 双运算放大集成电路AN6609N 电机驱动集成电路AN6612 电机稳速控制集成电路AN6650 电机速度控制集成电路AN6651 电机速度控制集成电路AN6652 电机稳速控制集成电路AN6875 发光二极管五位显示驱动集成电路AN6877 发光二极管七位显示驱动集成电路AN6884 发光二极管五位显示驱动集成电路AN6886 发光二极管五位显示驱动集成电路AN6888 发光二极管显示驱动集成电路AN6914 双电压比较集成电路AN7085N5 单片录、放音集成电路AN7105 双声道音频功率放大集成电路AN7106K 双声道音频功率放大集成电路AN7108 单片立体声放音集成电路AN710S 单片放音集成电路AN7110E 音频功率放大集成电路AN7114 音频功率放大集成电路AN7116 音频功率放大集成电路AN7118 双声道音频功率放大集成电路AN7118S 双声道音频功率放大集成电路AN7120 音频功率放大集成电路AN7124 双声道音频功率放大集成电路AN7145 双声道音频功率放大集成电路AN7148 双声道音频功率放大集成电路AN7158N 音频功率放大7.5W×2集成电路AN7161N 音频功率放大集成电路AN7164 双声道音频功率放大集成电路AN7171NK 音频功率放大集成电路AN7205 调频/调谐及高频放大集成电路AN7220 调频/调幅中频放大集成电路AN7222 调频/调幅中频放大集成电路AN7223 调频/调幅中频放大集成电路AN7226 调频/调幅中频放大集成电路AN7256 调频/调谐及中频放大集成电路AN7311 双声道前置放大集成电路AN7312 双声道前置放大集成电路AN7315 双声道前置放大集成电路AN7315S 双声道前置放大集成电路AN7320 音频前置放大集成电路AN7396K 双声道前置放大集成电路AN7397K 双声道前置放大集成电路AN7410 调频立体声多路解码集成电路AN7414 调频立体声解码集成电路AN7420N 调频立体声解码集成电路AN7470 调频立体声解码集成电路AN7805 三端电源稳压＋5V/1A集成电路AN7806 三端电源稳压＋6V/1A集成电路AN7807 三端电源稳压＋7V/1A集成电路AN7808 三端电源稳压＋8V/1A集成电路AN7809 电源稳压＋9V/1A集成电路AN7810 三端电源稳压＋10V/1A集成电路AN7812 三端电源稳压＋12V/1A集成电路AN7815 三端电源稳压＋15V/1A集成电路AN7818 三端电源稳压＋18V/1A集成电路AN7820 三端电源稳压＋20V/1A集成电路AN7824 三端电源稳压＋24V/1A集成电路AN78L05 三端电源稳压＋5V/0.1A集成电路AN78L06 三端电源稳压＋6V/0.1A集成电路AN78L08 三端电源稳压＋8V/0.1A集成电路AN78L09 三端电源稳压＋9V/0.1A集成电路AN78L10 三端电源稳压＋10V/0.1A集成电路AN78L12 三端电源稳压＋12V/0.1A集成电路AN78L15 三端电源稳压＋15V/0.1A集成电路AN78L18 三端电源稳压＋18V/0.1A集成电路AN78L20 三端电源稳压＋20V/0.1A集成电路AN78L24 三端电源稳压＋24V/0.1A集成电路AN78M05 三端电源稳压＋5V/0.5A集成电路AN78M06 三端电源稳压＋6V/0.5A集成电路AN78M08 三端电源稳压＋8V/0.5A集成电路AN78M09 三端电源稳压＋9V/0.5A集成电路AN78M10 三端电源稳压＋10V/0.5A集成电路AN78M12 三端电源稳压＋12V/0.5A集成电路AN78M15 三端固定式稳压＋15V/0.5A集成电路AN78M18 三端电源稳压＋18V/0.5A集成电路AN78M20 三端电源稳压＋20V/0.5A集成电路AN78M24 三端电源稳压＋24V/0.5A集成电路AN7905 三端电源稳压-5V/1A集成电路AN7906 三端电源稳压-6V/1A集成电路AN7908T 三端电源稳压-8V/1A集成电路AN7909T 三端电源稳压-9V/1A集成电路AN7910T 三端电源稳压-10V/1A集成电路AN7912 三端电源稳压-12V/1A集成电路AN7915 三端电源稳压-15V/1A集成电路AN7918 三端电源稳压-18V/1A集成电路AN7920 三端电源稳压-20V/1A集成电路AN7924 三端电源稳压-24V/1A集成电路AN79L05 三端电源稳压-5V/0.1A集成电路AN79L06 三端电源稳压-6V/0.1A集成电路AN79L08 三端电源稳压-8V/0.1A集成电路AN79L09 三端电源稳压-9V/0.1A集成电路AN79L10 三端电源稳压-10V/0.1A集成电路AN79L12 三端电源稳压-12V/0.1A集成电路AN79L15 三端电源稳压-15V/0.1A集成电路AN79L18 三端电源稳压-18V/0.1A集成电路AN79L20 三端电源稳压-20V/0.1A集成电路AN79L24 三端电源稳压-24V/0.1A集成电路AN79M05 三端电源稳压-5V/0.5A集成电路AN79M06 三端电源稳压-6V/0.5A集成电路AN79M08 三端电源稳压-8V/0.5A集成电路AN79M09 三端电源稳压-9V/0.5A集成电路AN79M10 三端电源稳压-10V/0.5A集成电路AN79M12 三端电源稳压-12V/0.5A集成电路AN79M15 三端电源稳压-15V/0.5A集成电路AN79M18 三端电源稳压-18V/0.5A集成电路AN79M20 三端电源稳压-20V/0.5A集成电路AN79M24 三端电源稳压-24V/0.5A集成电路AN8028 自激式开关电源控制集成电路AN8270K 主轴电机控制集成电路AN8280 电机驱动集成电路AN8281S 电机驱动集成电路AN8290S 主轴电机驱动集成电路AN8355S 条形码扫描接收集成电路AN8370S 光电伺服控制集成电路AN8373S 射频伺服处理集成电路AN8375S 伺服处理集成电路AN8389S-E1 电机驱动集成电路AN8480NSB 主轴电机驱动集成电路AN8481SB-E1 主轴电机驱动集成电路AN8482SB 主轴电机驱动集成电路AN8623FBQ 主轴伺服处理集成电路AN8788FB 电机驱动集成电路AN8802CE1V 伺服处理集成电路AN8813NSBS 主轴电机驱动集成电路AN8819NFB 伺服驱动、直流交换集成电路AN8824FBQ 前置放大集成电路AN8825NFHQ-V 聚焦、循迹误差处理集成电路AN8831SC 视频预视放集成电路AN8832SB-E1 射频放大、伺服处理集成电路AN8837SB-E1 伺服处理集成电路AN89C2051-24PC 微处理集成电路APU2400U 音频信号处理集成电路APU2470 音频信号处理集成电路AS4C14405-60JC 动态随机存储1M×4集成电路AS4C256K16ED-60JC 存储集成电路ASD0204-015 图文控制集成电路ASD0204GF 显示控制集成电路AT24C08 存储集成电路AT24C256-10CI 码片集成电路AT27C010 电可改写编程只读存储集成电路AT27C020 存储集成电路ATMEL834 存储集成电路AVM-1 视频信号处理厚膜集成电路AVM-2 音频信号处理厚膜集成电路AVSIBCP08 倍压整流切换集成电路B0011A 存储集成电路B1218 电子快门控制集成电路BA033T 三端电源稳压＋3.3V集成电路BA10324 四运算放大集成电路BA10393N 双运算放大集成电路BA1102F 杜比降噪处理集成电路BA1106F 杜比降噪处理集成电路BA12ST 电源稳压集成电路BA1310 调频立体声解码集成电路BA1332L 调频立体声解码集成电路BA1350 调频立体声解码集成电路BA1351 调频立体声解码集成电路BA1356 调频立体声解码集成电路BA1360 调频立体声解码集成电路BA15218N 双运算放大集成电路BA225 可触发双单稳态振荡集成电路BA302 音频前置放大集成电路BA311 音频前置放大集成电路BA313 音频前置放大集成电路BA3283 单片放音集成电路BA328F 双声道前置放大集成电路BA329 双声道前置放大集成电路BA3304F 录放音前置均衡放大集成电路BA3306 音频、前置放大集成电路BA3312N 话筒信号前置放大集成电路BA3313L 自动音量控制集成电路BA3314 话筒信号前置放大集成电路BA335 自动选曲集成电路BA340 音频前置放大集成电路BA3402F 双声道前置放大集成电路BA3404F 自返转放音集成电路BA3416BL 双声道前置放大集成电路BA343 双声道前置放大集成电路BA3503F 双声道前置放大集成电路BA3506 单片放音集成电路BA3513FS 单片放音集成电路BA3516 单片放音集成电路BA3706 自动选曲集成电路BA3707 录音带曲间检测集成电路BA3812L 五频段音调补偿集成电路BA3818F 电压比较运放集成电路BA3822LS 双声道五频段显示均衡集成电路BA3828 电子选台预置集成电路BA3880 音频处理集成电路BA401 调频中频放大集成电路BA402 调频中频放大集成电路BA4110 调频中频放大集成电路BA4234L 调频中频放大集成电路BA4402 调频调谐收音集成电路BA4403 调频高频放大、混频、本振集成电路BA4560 双运算放大集成电路BA5096 数字混响集成电路BA5102A 音频功率放大集成电路BA514 音频功率放大集成电路BA516 音频功率放大集成电路BA5208AF 音频功率放大集成电路BA532 音频功率放大集成电路BA534 音频功率放大集成电路BA5406 双声道音频功率放大集成电路BA5412 音频功率放大集成电路BA547 音频功率放大1.5W集成电路BA5912AFP-YE2 电机驱动、倾斜、加载集成电路BA5981FP-E2 聚焦、循迹驱动集成电路BA5983FB 四通道伺服驱动集成电路BA5983FM-E2 电机驱动集成电路BA6104 发光二极管五位显示驱动集成电路BA6107A 电机伺服控制集成电路BA6109 加载电机驱动集成电路BA6125 发光二极管五位显示驱动集成电路BA6137 发光二极管五位显示驱动集成电路BA6191 音频控制集成电路BA6196FP 伺服驱动集成电路BA6208 电机驱动集成电路BA6208D 电机驱动集成电路BA6209 电机驱动集成电路BA6209N 双向驱动电机集成电路BA6209U 电机双向驱动集成电路BA6218 加载电机驱动集成电路BA6219 电机驱动集成电路BA6219B 电机驱动集成电路BA6227 电机稳速控制集成电路BA6238 电机驱动集成电路BA6239 电机双向驱动集成电路BA6239A 电机双向驱动集成电路BA6246M 加载、转盘电机驱动集成电路BA6248 电机驱动集成电路BA6286 电机驱动集成电路BA6287 电机驱动集成电路BA6290 电机驱动集成电路BA6295AFP-E2 加载、倾斜驱动集成电路BA6296FP 电机速度控制集成电路BA6297AFP 伺服驱动集成电路BA6302A 电机伺服控制集成电路BA6305 控制放大集成电路BA6305F 控制放大集成电路BA6308 电子开关切换集成电路BA6321 电机伺服控制集成电路BA6392 伺服驱动集成电路BA6395 主轴电机驱动集成电路BA6396FP 伺服驱动集成电路BA6411 电机驱动集成电路BA6435S 主轴电机驱动集成电路BA6459P1 电机驱动集成电路BA6570FP-E2 聚焦、循迹驱动集成电路BA6664FM 三相主电机驱动集成电路BA6791FP 四通道伺服驱动集成电路BA6796FP 电机驱动集成电路BA6810S 音频显示驱动集成电路BA6844AFP-E2 三相主电机驱动集成电路BA6849FP 主轴电机驱动集成电路BA689 发光二极管十二位显示驱动集成电路BA6893KE2 直流变换驱动集成电路BA6956AN 加载电机驱动集成电路BA6993 双运算放大集成电路BA7001 音频切换集成电路BA7004 测试信号发生集成电路BA7005AL 射频调制集成电路BA7007 信号检测集成电路BA7021 视频信号选择集成电路BA7024 视频信号测试集成电路BA7025L 信号检测集成电路BA7042 振荡集成电路BA7047 调频检波集成电路BA7048N 包络信号检测集成电路BA7106LS 检测信号控制集成电路BA7180FS 磁头信号放大集成电路BA7212S 磁头信号放大集成电路BA7253S 磁头信号放大集成电路BA7254S 四磁头信号放大集成电路BA7258AS 亮度信号处理集成电路BA7264S 视频信号处理集成电路BA7274S 磁头信号放大集成电路BA7357S 中频放大集成电路BA7604N 电子开关切换集成电路BA7606F 色差信号切换集成电路BA7665FS-E2 视频输出放大集成电路BA7725FS 混响立体声放大集成电路BA7725S 信号压缩及扩展处理集成电路BA7743FS 磁头信号放大集成电路BA7751ALS 音频信号录放处理集成电路BA7752LS 音频信号处理集成电路BA7755 磁头开关集成电路BA7755AF-E2 磁头开关集成电路BA7765AS 音频信号处理集成电路BA7766SA 音频信号处理集成电路BA7767AS 音频信号处理集成电路BA7797F 音频信号处理集成电路BA8420 特技控制处理集成电路BAL6309 场同步信号发生集成电路BH3866AS 音频、色度信号前置放大集成电路BH4001 微处理集成电路BH7331P 音频功率放大集成电路BH7770KS 音频信号处理集成电路BL3207 亮度延时集成电路BL3208B 音频延迟混响集成电路BL5132 中频放大集成电路BL54573 电子调频波段转换集成电路BL5612 视频放大、色差矩阵集成电路BM5060 微处理集成电路BM5061 字符发生集成电路BM5069 微处理集成电路BN5115 图像中频放大集成电路BOC31F 单片微处理集成电路BP5020 视频电源转换集成电路BT852 视频编码集成电路BT864 视频编码集成电路BT866PQFP 微处理集成电路BU12102 时序信号发生解码集成电路BU2092F 扩展集成电路BU2185F 同步信号处理集成电路BU2820 伺服控制集成电路BU2841FS 视频、蓝背景信号发生集成电路BU2872AK 操作系统控制、屏显驱动集成电路BU3762AF 红外遥控信号发射集成电路BU4053B 电子开关切换集成电路BU5814F 红外遥控信号发射集成电路BU5994F 红外遥控信号发射集成电路BU6198F 屏幕显示集成电路BU9252F 音频延时集成电路BU9252S 数/模转换集成电路BU9253FS 话筒音频混响集成电路BX1303 音频功率放大集成电路BX1409 红外遥控信号接收集成电路BX7506 主轴电机电源控制集成电路C1363CA 红外遥控电子选台集成电路C1490HA 红外遥控信号接收集成电路C187 分配、十进制计数集成电路C301 译码BCD-10段集成电路C68639Y 微处理集成电路C75P036 微处理集成电路CA0002 调幅模拟声解调集成电路CA2004 音频功率放大集成电路CA2006 音频功率放大集成电路CA270AW 视频检波放大集成电路CA3075 调频中频放大集成电路CA3089 调频中频放大集成电路CA3120E 视频信号处理集成电路CA3140 运算放大集成电路CA810 音频功率放大集成电路CA920 行扫描信号处理集成电路CAS126 天线开关集成电路CAT24C16 电可改写编程只读存储集成电路CAT35C104HP 存储集成电路CC4000 或非门双3输入集成电路CC4008 计数4位二进制集成电路CC40107 与非双2输入缓冲、驱动集成电路CC40174 六D触发集成电路CC40194 移位寄存集成电路CC4025 或非门3输入集成电路CC4026 译码、驱动、十进制计数集成电路CC4027 上升沿J-K触发集成电路CC4029 可预置4位可逆计数集成电路CC4033 译码、驱动、十进制计数集成电路CC4040 二进制计数、分频、振荡集成电路CC4047 单稳态触发集成电路CC4049 非门触发集成电路CC4051 模拟电子开关切换集成电路CC4053 电子开关切换集成电路CC4060 二进制计数、分频、振荡集成电路CC4067 模拟电子开关切换16选1集成电路CC4068 与非门8输入集成电路CC4069 六非门集成电路CC4098 双单稳态触发集成电路CC4099 寄位锁存8位集成电路CC4504 六非门集成电路CC4508 双四位锁存集成电路CC4518 双BCD同步加法计数集成电路CC4520 双四位二进制同步加法计数集成电路CC4543 锁存、译码、驱动BCD-7段集成电路CCST5007 图文电视汉字存储集成电路CCU2000 微处理集成电路CCU2030 微处理集成电路CCU-FBTV02 微处理集成电路CCU-FDTV06 微处理集成电路CD1130 调频/调谐及中频放大集成电路CD1140 调频/调谐及中频放大集成电路CD1452 双声道前置放大集成电路CD1514 音频功率放大集成电路CD1518 双声道音频功率放大集成电路CD2002 音频功率放大集成电路CD2611GS 音频功率放大集成电路CD3161CS 双声道前置放大集成电路CD3210 音频前置放大集成电路CD3220 音频前置放大集成电路CD4021BCM 移位寄存并入、串出集成电路CD4160 单片录、放音集成电路CD4511 液晶显示驱动集成电路CD5132 图像中频放大、视频检波集成电路CD5435 行、场扫描信号处理集成电路CD5511 直流电机转速控制集成电路CD5522 电机稳速控制集成电路CD7243 伴音信号处理集成电路CD7366 发光二极管五位显示驱动集成电路CD74202CS 音频功率放大集成电路CD74212CS 音频功率放大集成电路CD7629 杜比降噪处理集成电路CD7630 双声道音调、音量、平衡控制集成电路CD7640CP 调频/调幅中频放大集成电路CD7642 单片调幅收音集成电路CD7668AP 双声道前置放大集成电路CD7784GP 双声道前置放大集成电路CD810 场扫描输出集成电路CD8403CS 场扫描输出集成电路CD9608CS 双声道前置放大集成电路CDVS110 数据传输控制集成电路CF70200 字符信号处理集成电路CF72306 制式切换集成电路CH05002 微处理集成电路CH208 数码显示驱动集成电路CH4078 或非门集成电路CH5081 主轴相位伺服控制集成电路CH52010 荧光屏显控制集成电路CH52011 微处理集成电路CH52012 视频编码集成电路CH7001C 视频编码集成电路CH7201 视频编码集成电路CHT0406 微处理集成电路CHT0606 微处理集成电路CHT0803 微处理集成电路CHT0807 微处理集成电路CHT0808 微处理集成电路CHT0818 微处理集成电路CIC1240A 电子振铃集成电路CIC9106 振铃集成电路CIC9145 音频、脉冲拨号集成电路CKP1001S 微处理集成电路CKP1003S 微处理集成电路CKP1004S 微处理集成电路CKP1006S 微处理集成电路CKP1008S 微处理集成电路CKP1009S 微处理集成电路CKP1101S 微处理集成电路CKP1103S 微处理集成电路CKP1105S 微处理集成电路CKP1602S 微处理集成电路CKP1603S 微处理集成电路CL480 音频、视频解码集成电路CL482 音频、视频解码集成电路CL484 音频、视频解码集成电路CL680 音频、视频解码集成电路CL8820 音频、视频解码集成电路CL8830A 系统控制处理、编码、解码集成电路CM006CF 数字会聚校正集成电路CM46745 微处理集成电路CMS80D801 解压集成电路CN9832 语言录、放音处理集成电路CNX82 光电耦合集成电路CNY17-2 光电耦合集成电路CNY71 光电耦合集成电路CR3700 音频解码集成电路CRFU3-BF 射频模块集成电路CS4338K 音频数/模转换集成电路CS5339-KS 数/模转换集成电路。
C-D开头的集成电路
CXA1571S 射频聚焦伺服信号处理集成电路
CXA1587S 色度、同步及行场扫描信号处理集成电路
CXA1622 音频功率放大集成电路
CXA1644P 回声效果发生集成电路
CXA1645M 三基色编码集成电路
CXA1649M 低音提升集成电路
CH7201 视频编码集成电路
CHT0406 微处理集成电路
CHT0606 微处理集成电路
CHT0803 微处理集成电路
CHT0807 微处理集成电路
CHT0808 微处理集成电路
CHT0818 微处理集成电路
CIC1240A 电子振铃集成电路
CIC9106 振铃集成电路
CIC9145 音频、脉冲拨号集成电路
CKP1001S 微处理集成电路
CKP1003S 微处理集成电路
CKP1004S 微处理集成电路
CKP1006S 微处理集成电路
CKP1008S 微处理集成电路
CKP1009S 微处理集成电路
CKP1101S 微处理集成电路
CKP1103S 微处理集成电路
CKP1105S 微处理集成电路
CT54198 双向移位寄存集成电路
CT54251 数据选择8输入集成电路
CT54283 计数4位二进制集成电路
CT5430 与非门8输入集成电路
CT5440 与非门双4输入缓冲集成电路
CT5442 译码4-10线集成电路
CT54H00 与非门四2输入集成电路
CT54H01 与非门四2输入集成电路
CM006CF 数字会聚校正集成电路
电脑编号大全
电脑编号大全Bora A4 各电控系统控制单元编码及零件号发动机控制单元（地址-01，功能07-编码见下）车型控制单元零件号编码----------------------------------------------------------------1.6L 手动箱06A 906 032 EQ 00031发动机06A 906 032 JB 00033-----------------------------------------------------------------1.8L 手动箱06A 906 032 LE 04500发动机自动箱06A 906 032 LF 04530-----------------------------------------------------------------1.8T 手动箱06A 906 032 EN 04500发动机自动箱06A 906 032 LD 04530----------------------------------------------------------------- 自动变速箱控制单元（地址-02，功能07-编码00000）ABS控制单元（地址-03，功能07-编码01025/21505/13313）控制单元类型控制单元零件号编码--------------------------------------------------------------------------------1.6L/1.8L/1.8T 1C0 907 379J 01025ABS 1C0 907 379L--------------------------------------------------------------------- ASR/EDS(1.6L/1.8L) 1C0 907 379K 13313---------------- -------------ASR/EDS(1.8T) 21505--------------------------------------------------------------------------------空调控制单元（地址-08，功能07-编码01000/01100）安全气囊控制单元（地址-15，编码12622/12874/12875）控制单元零件号编码--------------------------------------------------------------------------------1C0 909 601 128741C0 909 601 2K 12875--------------------------------------------------------------------------------组合仪表（地址-17，编码05122/05123/01102/05102）车型控制单元零件号编码--------------------------------------------------------------------------------1.6L 手动无多功能显示1J5 920 806 C 01102自动无多功能显示1J5 920 806 B 01102--------------------------------------------------------------------------------1.8L 手动无多功能显示1J5 920 806 B1;1J5 920 826 A11J5 920 806 01102自动有多功能显示1J5 920 806 C1;1J5 920 826 A11JD 920 826 05102--------------------------------------------------------------------------------1.8T 手动有多功能显示1J5 920 826 A ; 1JD 920 826 05122自动有多功能显示1J5 920 826 A1; 1JD 920 826 05122--------------------------------------------------------------------------------Gate-way系统（地址-19，编码00006或00007）舒适系统（地址-46，编码04096/04097/00256/257/258/259 ）--------------------------------------------------------------------------------对于舒适系统，目前在BORA A4所有车型上编码均相同，即在 1.6L\1.8L\1.8T车上，舒适系统的编码均为00259(00256\00257\00258)--------------------------------------------------------------------------------[U]收音机[/U]（地址-56，00001/00003/00401/00403[/B] 控制单元类型（有/无CD) 控制单元零件号编码--------------------------------------------------------------------------------无（GAMMA) 3BD 035 186 00401收音机有（GAMMA) 3BD 035 186 00403无(BA TTA) 3BD 035 152 00001有(BA TTA) 3BD 035 152 00003----------------------------------------------------------------------------------------------------------------------------------------------------------------A6.2.8 波箱控制单元编码！4B0927156G AG5 01V 2.8L5V USA8509编码号是00001原装奥迪A6电脑型号美规原装奥迪A6.2.8L 手动自动两用波箱电脑型号发动机电脑:4D0907551AH 2.8L V6/5V MOTRA T D02CODING:06252波箱电脑:4B09271156G AG501V 2.8L5V USA 8509CODING:00001ABS电脑:8E0614111M ABS/EDS5.3 OUA TTRO D31CODING:06169仪表电脑:4B0919930RX C5-KOMBIINSTR VDO D15CODING:07262空调电脑:4B0820043G A6-KLIMA VOLL AUTOMA T:D61CODING:00160中央控制门锁:4B0962258C CENTRALLOCK/ALARM D30CODING:15885菠萝转向助力电脑编号6Q0 423 156 Q LenkhilfeTRW V250Coding: 10140 Code: WSC 12345polo 波罗 1.4L MT 全车电脑版本号01-ENGINE //01-10-d 188 (含EPC 电子油门控制)036 906 034 DM MARELLI 4MV 4837Coding: 00071 WSC 12345VIN: LSVFA49J732012842 IMMO ID:VWZ7Z0C683158503 - ABS 6Q0 907 379 L ABS FRONT MK60 0101Coding: 0001097 WSC 1234508 - 空调6Q0 820 045 Klimaanlage X0840该空调是没有CODING 和WSC 的我去维修站多次用V AS5051+V AS5052验证过的2 Faults Found:01596 - Motor for Outside/Recirculated Air Flap (V154)30-10 - Open or Short to B+ - Intermittent01596 - Motor for Outside/Recirculated Air Flap (V154)41-10 - Blocked or No V oltage - Intermittent15 - AIRBAG 6Q0 909 601 E 07 AIRBAG VW5 0007Coding: 12343 WSC 1234517 - 仪表/IMMO 6Q0 920 800 KOMBI+WEGFAHRSP VDO V16Coding: 00141 WSC 57952LSVFA49J732012842 VWZ7Z0C683158519 - 网关6N0 909 901 14 GA TEWAY CAN 1S33Coding: 00014 WSC 1234525 - IMMOBILIZER(因为该车无电子防盗实际上这是17仪表抢答的)Controller: Bitte AdressComponent: e 17 eingeben46-J393(T23+T12C)舒适系统6Q0 959 433 G 4W Komfortgera 0002Coding: 00064 WSC 12345 (coding 为00264 可多控制后面2个门) J386(T12d+T8h+t12e)左前门: 6Q2959802A4W Tusteuer.FS KLO 0001J387(T8i +T6p+T12f)右前门: 6Q2959801A4W Tusteuer.BF KLO 000156 - 收放机6QD 035 152 Radio 5GD 0001Coding: 00001 WSC 1234509 - 电源与继电器管理6Q1 937 049 C 00 BN-SG. 1S33Coding: 25612 Code: WSC 1234544 - 转向助力6Q0 423 156 Q LenkhilfeTRW V250Coding: 10140 Code: WSC 1234503 - ABS 6Q0 907 379 L ABS FRONT MK60 0101Coding: 0001097 WSC 12345上海大众菠萝全车电脑版本号15 6Q0909601E 07 AIRBAG VW5 0007CODING:1234317 6Q0 920 800 & ........... VDO V13CODING:0014119 6N0 909 901 14 CE CANcoding:0001409 6Q1 937 049C 00.BN -SG 1S32coding:2561201 036 906 034DM m......4MZ 4449coding:0007101 06A 906 032 JCME7.5.104686coding:0007103 6Q0 907 379 E 0103 ABS MK60coding:00010972002 款GOLF 全车电脑版本号17-仪表与IMMO1J0 920 826 A KOMBI+WEGFAHRS. BPV V09 CODING:01112 WSC:00000VIN: WVWZZ Z1JZ2 D1910 77IMMO SN: VWZ6Z 0A378 861101-发动机I06A 906 033 AF SIMOS33 1.6l 2V 00A T4083 CODING:00033 WSC:31414VIN: WVWZZ Z1JZ2 D1910 77IMMO SN: VWZ6Z 0A378 861102-自动波01M 927 733 JH AG4 Getriebe 01M 4830 CODING:00000 WSC:0000046-中控与舒适系统1C0 959 799 B 1C Komfortgerβ HL0 0003CODING:00259 WSC:314141C1959801A 1C Tsteuer.FS KL0 00021C1959802A 1C Tsteuer.BF1C0959811A 1C Tsteuer.HL HL0 00021C0959812A 1C tsteuer.HR03-ABS系统1C0 907 379 J ABS FRONT MK60 0103CODING:0001025 WSC:3141415-气囊系统1C0 909 605 A 27 AIRBAG VW51 01 02CODING:12855 WSC:31414奥迪大众控制器编码编码原则:A:用设备读出旧电脑（或找一相同配置车辆读出电脑版本号)B:将电脑版本号 1 字不漏记录到维修日志C:根具电脑版本号和索引号寻找代换的电脑注意：已经爆炸的气囊电脑不可以二次使用B:根据车辆配置或老的脑版本号记录用控制器编码功能写如代换电脑注意: 25-IMMOBILIZER 电脑的CODING 号码代表的是通讯波特率不需要进行控制器编码提示：换电脑零件号9位，索引号1-3位必须一样,硬件名称，制造商代码,硬件版本号最好相同WSC:维修站号码，不用理会它，这样同样的CODING号码才能编入。
中央电化教育馆关于公布“数字校园综合解决方案”测试合格名单及产品出版展示有关工作的通知
智能显示设备
触摸电视
交互平板HD-I7031E
硬件设备
智能显示设备
触摸电视
交互平板HD-I8430E
硬件设备
扩展设备
视频展示台
多媒体视频展示台HZ-V190
硬件设备
扩展设备
视频展示台
多媒体视频展示台HZ-V210
硬件设备
扩展设备
视频展示台
多媒体视频展示台HZ-V230
硬件设备
扩展设备
视频展示台
硬件设备
一体机
触摸电视电脑一体机
佳发触摸电视电脑一体机JF-TP65A011
硬件设备
智能显示设备
触摸电视
佳发触摸电视一体机JF-TI65A010
硬件设备
智能显示设备
交互式电子白板
佳发交互式电子白板JF-IW82R001
广州佳比亚电子科技有限公司
硬件设备
扩展设备
扩音系统
合并式功放 XF-E500
硬件设备
一体机
触摸电视电脑一体机
触摸电视电脑一体机RC-TVI70H
硬件设备
一体机
触摸电视电脑一体机
触摸电视电脑一体机RC-65E76-P
硬件设备
一体机
触摸电视电脑一体机
触摸电视电脑一体机RC-70E76-P
北京盛兴利合网络科技有限公司
硬件设备
智能显示设备
交互式电子白板
互动式电子白板BT3202-D83
硬件设备
多媒体视频展示台HZ-V270
硬件设备
扩展设备
视频展示台
多媒体视频展示台HZ-3500
硬件设备
显示设备
投影机
液晶投影机HCP-A90
ADAM-4024(4021)快速入门手册
ADAM-4024（4021）快速入门手册注：本手册主要针对ADAM-4024来作说明。
ADAM-4021的操作类同于ADAM-4024。
一、 ADAM-4021(4024)概述ADAM-4021是1路模拟量输出通道，分辨率为12位，输出范围0-20mA，4-20mA，0-10V。
ADAM-4024是4路模拟量输出通道，分辨率为12位，输出范围0-20mA，4-20mA，+/-10V，支持Modbus协议。
用户可以通过配置软件配置电压或电流的建立速率和启动输出。
ADAM-4021技术说明-电压输出 0～10V(可编程输出斜率：0.0625～64 V/Sec)-电流输出: 0～20mA或4～20mA (可编程输出斜率：0.125～128 mA/Sec)模块按照配置设置,接收主机以以下其中一种形式发送的数据以-工程单位(mV,V或mA)-满量程百分比-十六进制表示的二进制补码ADAM-4024二、 ADAM-4021（4024）硬件连接电压输出/电流输出接线图三、ADAM-4000 Utility的使用1. ADAM-4000的应用软件-ADAM Utility 的安装把ADAM4000 随机附带光盘放入计算机的光驱中，出现如下画面选择ADAM4000 Utility 安装选项，出现如下安装界面：1.ADAM-4021(4024)模块简单控制接线图根据后续的软件安装提示，完成ADAM4000 Utility 的安装。
PC机上就会出现ADAM4000 Utility的软件如下图2 .ADAM Utility的快速使用1. 选中COM1或COM2，点击工具栏快捷键search：2. 弹出“Search Installed Modules ”窗口，提示扫描模块的范围，允许输入0～255。
RS-485网络扫描如下图所示3. 点击模块，进入测试/配置界面：注意：1. ADAM-4024每个通道可独立设置输出范围2.当Emer.Input允许时，若DIn为高电平时，该通道的DOn输出值则为设置的Emer.Val。
PCB Model 482C05 Four-channel, ICP Sensor Signal C
Model 482C05Four-channel, ICP® Sensor Signal Conditioner Installation and Operating ManualFor assistance with the operation of this product,contact PCB Piezotronics, Inc.Toll-free: 800-828-884024-hour SensorLine: 716-684-0001Fax: 716-684-0987E-mail:************Web: Repair and MaintenancePCB guarantees Total Customer Satisfaction through its “Lifetime Warranty Plus” on all Platinum Stock Products sold by PCB and through its limited warranties on all other PCB Stock, Standard and Special products. Due to the sophisticated nature of our sensors and associated instrumentation, field servicing and repair is not recommended and, if attempted, will void the factory warranty.Beyond routine calibration and battery replacements where applicable, our products require no user maintenance. Clean electrical connectors, housings, and mounting surfaces with solutions and techniques that will not harm the material of construction. Observe caution when using liquids near devices that are not hermetically sealed. Such devices should only be wiped with a dampened cloth—never saturated or submerged.In the event that equipment becomes damaged or ceases to operate, our Application Engineers are here to support your troubleshooting efforts 24 hours a day, 7 days a week. Call or email with model and serial number as well as a brief description of the problem. CalibrationRoutine calibration of sensors and associated instrumentation is necessary to maintain measurement accuracy. We recommend calibrating on an annual basis, after exposure to any extreme environmental influence, or prior to any critical test.PCB Piezotronics is an ISO-9001 certified company whose calibration services are accredited by A2LA to ISO/IEC 17025, with full traceability to SI through N.I.S.T. In addition to our standard calibration services, we also offer specialized tests, including: sensitivity at elevated or cryogenic temperatures, phase response, extended high or low frequency response, extended range, leak testing, hydrostatic pressure testing, and others. For more information, contact your local PCB Piezotronics distributor, sales representative, or factory customer service representative. Returning EquipmentIf factory repair is required, our representatives will provide you with a Return Material Authorization (RMA) number, which we use to reference any information you have already provided and expedite the repair process. This number should be clearly marked on the outside of all returned package(s) and on any packing list(s) accompanying the shipment.Contact InformationPCB Piezotronics, Inc.3425 Walden Ave.Depew, NY14043 USAToll-free: (800) 828-884024-hour SensorLine: (716) 684-0001General inquiries: ************Repair inquiries: ***********For a complete list of distributors, global offices and sales representatives, visit our website, .Safety ConsiderationsThis product is intended for use by qualified personnel who recognize shock hazards and are familiar with the precautions required to avoid injury. While our equipment is designed with user safety in mind, the protection provided by the equipment may be impaired if equipment is used in a manner not specified by this manual.Discontinue use and contact our 24-Hour Sensorline if:∙Assistance is needed to safely operate equipment∙Damage is visible or suspected∙Equipment fails or malfunctionsFor complete equipment ratings, refer to the enclosed specification sheet for your product.Definition of Terms and SymbolsThe following symbols may be used in this manual:DANGERIndicates an immediate hazardoussituation, which, if not avoided, mayresult in death or serious injury.CAUTIONRefers to hazards that could damage the instrument.NOTEIndicates tips, recommendations and important information. The notes simplify processes and containadditional information on particular operating steps.The following symbols may be found on the equipment described in this manual:This symbol on the unit indicates that high voltage may be present. Use standard safety precautions to avoid personal contact with this voltage.This symbol on the unit indicates that the user should refer to the operating instructions located in the manual.This symbol indicates safety, earth ground.PCB工业监视和测量设备 - 中国RoHS2公布表PCB Industrial Monitoring and Measuring Equipment - China RoHS 2 Disclosure Table部件名称有害物质铅 (Pb)汞(Hg)镉(Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE)住房O O O O O O PCB板X O O O O O 电气连接器O O O O O O 压电晶体X O O O O O 环氧O O O O O O 铁氟龙O O O O O O 电子O O O O O O 厚膜基板O O X O O O 电线O O O O O O 电缆X O O O O O 塑料O O O O O O 焊接X O O O O O 铜合金/黄铜X O O O O O 本表格依据 SJ/T 11364 的规定编制。
晶体管产品数据手册：HEF40244B八路非逆转接电路说明书
HEF40244BOctal buffers with 3-state outputsRev. 4 — 29 June 2018Product data sheet1General descriptionThe HEF40244B is an octal non-inverting buffer with 3-state outputs. It features outputstages with high current output capability suitable for driving highly capacitive loads.The 3-state outputs are controlled by the output enable inputs EOA and EOB. A HIGHon EOA or EOB causes the outputs to assume a high impedance OFF-state. The devicealso features hysteresis on all inputs to improve noise immunity.Schmitt-trigger action in the inputs makes the circuit highly tolerant to slower input riseand fall times.2Features and benefits•Octal bus interface•3-state buffers•Fully static operation•5 V, 10 V, and 15 V parametric ratings•Standardized symmetrical output characteristics•Specified from −40 °C to +85 °C3Ordering informationOctal buffers with 3-state outputs4Functional diagram5Pinning information5.1PinningHEF40244BEOA V DD IA1EOB OB4OA1IA21B4OB3OA2IA3IB3OB2OA3IA4IB2OB1OA4V SS IB1aaa-0286821234567891012111413161518172019Figure 4. Pin configuration for SO20Octal buffers with 3-state outputs5.2Pin description6Functional description[1][1]H = HIGH voltage level;L = LOW voltage level;X = don’t care;Z = high-impedance OFF-state.7Limiting valuesTable 4. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).[1]For SO20 package: P tot derates linearly with 8 mW/K above 70 °C.Octal buffers with 3-state outputs 8Recommended operating conditions9Static characteristicsTable 6. Static characteristics= 0 V; V = V or V unless otherwise specified.VOctal buffers with 3-state outputs[1]Unused inputs must be connected to V DD, V SS or another input.10Dynamic characteristicsTable 7. Dynamic characteristicsV = 0 V; T = 25 °C; unless otherwise specified; for waveform and test circuit, see Figure 10.Octal buffers with 3-state outputs[1]The typical values of the propagation delay are calculated from the extrapolation formulas shown (C L in pF).Octal buffers with 3-state outputs 10.1Waveforms and test circuitOctal buffers with 3-state outputsOctal buffers with 3-state outputsOctal buffers with 3-state outputs 11Package outlineOctal buffers with 3-state outputs 12Abbreviations13Revision historyOctal buffers with 3-state outputs 14Legal information14.1 Data sheet status[1]Please consult the most recently issued document before initiating or completing a design.[2]The term 'short data sheet' is explained in section "Definitions".[3]The product status of device(s) described in this document may have changed since this document was published and may differ in case of multipledevices. The latest product status information is available on the Internet at URL .14.2 DefinitionsDraft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information.Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.14.3 DisclaimersLimited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia's aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia.Right to make changes — Nexperia reserves the right to make changesto information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunctionof an Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk.Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect.Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device.Terms and conditions of commercial sale — Nexperia products aresold subject to the general terms and conditions of commercial sale, as published at /profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer.No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance orthe grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities.Octal buffers with 3-state outputsNon-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia's specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Nexperia's standard warranty and Nexperia's product specifications.Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.14.4 TrademarksNotice: All referenced brands, product names, service names and trademarks are the property of their respective owners.Octal buffers with 3-state outputsContents1General description (1)2Features and benefits (1)3Ordering information (1)4Functional diagram (2)5Pinning information (2)5.1Pinning (2)5.2Pin description (3)6Functional description (3)7Limiting values (3)8Recommended operating conditions (4)9Static characteristics (4)10Dynamic characteristics (5)10.1Waveforms and test circuit (7)11Package outline (10)12Abbreviations (11)13Revision history (11)14Legal information (12)Please be aware that important notices concerning this document and the product(s)described herein, have been included in section 'Legal information'.Mouser ElectronicsAuthorized DistributorClick to View Pricing, Inventory, Delivery & Lifecycle Information:N experia:HEF40244BT,652HEF40244BT,653。
陵两优4024水稻品种好不好？
陵两优4024水稻品种怎么样？品种审定编：湘审稻2021004作物种类：水稻品种名称：陵两优4024选育：湖南农业大学、袁隆平农业高科技股份品种来源：湘陵628Stimes;4024已往审定情况：无特征特性：该品种属两系杂交迟熟早稻。
区试结果：在我作早稻栽培全生育117.2天。
株高91厘米株型松紧适中剑叶中长、较宽、直立。
叶鞘、稃尖无色熟落色好。
每亩有效穗22万穗每穗总粒数112.5粒结实率79.8千粒重28.0克。
抗性：叶瘟平均3.65级穗颈瘟平均6.35级稻瘟病综合抗性指数3.81级；白叶枯病5级；抗寒才能较强。
米质：糙米率82.0、精米率72.5、整精米率58.5、粒长6.7毫米、长宽比2.9、垩白粒率75、垩白度5.4、透明度2级、碱消值3.0级、胶稠度60毫米、直链淀粉含量19.8。
产量表现：2021年区试平均亩产482.27公斤比对照金优402增产5.36增产不显著；2021年区试平均亩产533.54公斤比对照陆两优996增产6.22增产极显著。
两年区试平均亩产507.91公斤比对照增产5.79日产量4.34公斤比对照高0.19公斤。
栽培要点：湘南3月20日播种湘中、湘北适当推延2～4天播种每亩秧田播种量15公斤每亩大田用种量2～2.5公斤水育秧4.5叶左右移栽。
种植度：根据肥力程度采用13厘米times;20厘米16厘米times;20厘米每蔸插3粒谷秧每亩根本苗8万左右。
基肥足追肥速中酌情补氮、磷、钾结合施用适当增加磷、钾肥用量。
深水活蔸浅水分蘖及时晒田有水壮苞抽穗后干干湿湿不脱水过早。
注意对螟虫、纹枯病、稻瘟病等病虫害的防治。
审定：该品种到达审定通过审定。
适宜在我稻瘟病轻发区作早稻种植。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
5.0 10.0 15.0 5.0 10.0 15.0 5.0 10.0 15.0
规范值
最小
最大
-
360
160
130
-
200
80
60
200
100
80
3.5
-
8.0Biblioteka 12.0-14060
40
无限制
-
7.5
-
280
120
100
-
200
80
60
350
150
100
单位 ns
ns MHz
ns µs pF ns
15/0 15.0
-40℃
-1.8 -0.61 -1.5 -4.0 0.61 1.5 4.0 ±0.1
规范值 25℃ 85℃
0.05
125℃
4.95 9.95 14.95
1.5 3.0 4.0
3.5 7.0 11.0
-1.6 -0.51 -1.3 -3.4 0.51 1.3 3.4
-1.3 -0.42 -1.1 -2.8 0.42 1.1 2.8
CP 上升或下降时间
5.0 10.0 20.0
规范值
VDD＝5V 最小 最大
-
3.5
140 -
200 350 无限制
5.0 10.0 20.0
VDD＝10V 最小 最大
-
8.0
60 -
80 150 -
150.0 300.0 600.0
VDD＝15V 最小 最大
-
12.0
40 -
60 100 -
µA
单位
CC4024-----7位二进制串行计数器 简要说明：
CC4024 是 7 位二进制串行计数器。所有的计数器为主从触发器。计数器在时 钟下降沿进行计数。CR 为高电平时，对计数器进行清零。由于在时钟输入端使用斯 密特触发器，对脉冲上升和下降时间无限制，所有输入和输出均经过缓冲。
CC4024 提供了 14 引线多层陶瓷双列直插（D）、熔封陶瓷双列直插（J）、塑料 双列直插（P）和陶瓷片状载体（C）4 种封装形式。
MHz ns ns ns µs
动态特性（TA＝25℃）：
参数
测试条件
CP 操作
tPLH、tPHL 传输 延迟时间
CP → Q0
Qn → Qn＋1
CL＝50pF RL＝200k tr＝20ns tf＝20ns
tTLH、tTHL 输出转换时间
fcp
CP 频率
tw
CP 脉冲宽度
tr、tf
CP 上升或下降时
逻辑符号：
引出端排列（俯视）：
功能表： 逻辑图：
静态特性：
参数
VOL 输出低 电平电压 （最大） VOH 输出高 电平电压 （最小） VIL 输入低电 平电压 （最大） VIH 输入高 电平电压 （最小）
测试条件
VO
VI
（V） （V）
-
5/0
10/0
15/0
-
5/0
10/0
15/0
0.5/4.5 1.0/9.0 1.5/13.5
引出端符号：
CP CR Q0～Q6 VDD Vss
时钟输入端 清除端 计数器脉冲输出端 正电源 地
推荐工作条件： 电源电压范围…………3V～15V 输入电压范围…………0V～VDD 工作温度范围
M 类…………－55℃～125℃ E 类………….－40℃～85℃
极限值：
电源电压…...－0.5V～18V 输入电压……－0.5V~VDD+0.5V 输入电流…………….±10mA 储存稳定…………－65℃～150℃
-1.15 -0.36 - 0.9 -2.4 0.36 0.9 2.4
±1.0
单位 V V V V mA
mA µA
IDD 电源电
-
5/0 5.0
流
10/0 10.0
（最大）
15/0 15.0
动态工作条件（TA＝25℃）：
参数
fcp
tw tw tRE tr、tf
CP 频率
CP 脉冲宽度
CR 脉冲宽度 CR 撤离时间
间
CI 输入电容 （任一输入端）
CR 操作
tPLH、tPHL 传输 延迟时间
CR → Q
tw
CR 脉冲宽度
tRE CR 撤离时间
VDD（V）
5.0 10.0 15.0 5.0 10.0 15.0 5.0 10.0 15.0 5.0 10.0 15.0 5.0 10.0 15.0 5.0 10.0 15.0
4.5/0.5 9.0/1.0 13.5/1.5
VDD （V）
5.0 10.0 15.0
5.0 10.0 15.0
5.0 10.0 15.0
5.0 10.0 15.0
-55℃
IOH 输出高电 2.5
平电流
4.6
（最小）
9.5
13.5
IOL 输出低电 0.4
平电流
0.5
（最小）
1.5
II 输入电流
-
5/0 5.0 -2.0 5/0 5.0 -0.64 10/0 10.0 -1.6 15/0 15.0 -4.2 5/0 5.0 0.64 10/0 10.0 1.6 15/0 15.0 4.2